CISCOSB-rlFft DEFINITIONS ::= BEGIN

-- Title:      CISCOSB FFT Private Extension
-- Version:    7.37.00.00
-- Date:       17 May 2004

IMPORTS
    switch001                                                     FROM CISCOSB-MIB
    Unsigned32, IpAddress,
    MODULE-IDENTITY, OBJECT-TYPE                            FROM SNMPv2-SMI
    RowStatus, TruthValue, PhysAddress, DisplayString,
    TEXTUAL-CONVENTION                                      FROM SNMPv2-TC;


    Percents ::= TEXTUAL-CONVENTION
                 STATUS  current
                 DESCRIPTION
                     "Specifies percents."
                 SYNTAX  INTEGER (0..100)

    NetNumber ::= TEXTUAL-CONVENTION
                 STATUS  current
                 DESCRIPTION
                     "Specifies the network identification."
                 SYNTAX OCTET STRING (SIZE(4))


---
---  rlIpFFT
---

rlFFT            MODULE-IDENTITY
                 LAST-UPDATED "200406010000Z"
				 ORGANIZATION "Cisco Small Business"

				 CONTACT-INFO
				 "Postal: 170 West Tasman Drive
				 San Jose , CA 95134-1706
				 USA

				 Website: Cisco Small Business Home http://www.cisco.com/smb>;,
				 Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"

                 DESCRIPTION
                      "The private MIB module definition for switch001 Fast Forwarding Tables."
                 REVISION "200406010000Z"
                 DESCRIPTION
                      "Initial version of this MIB."
                 ::= { switch001 47 }



rlIpFFT      OBJECT IDENTIFIER ::= { rlFFT 1 }

rlIpFftMibVersion OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "MIB's version, the current version is 1."
    ::= { rlIpFFT 1 }

rlIpMaxFftNumber OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of IP FFTs."
    ::= { rlIpFFT 2 }

rlIpFftDynamicSupported OBJECT-TYPE
    SYNTAX  INTEGER {
        supported (1),
        unsupported (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies whether dynamic IP FFTs are supported."
    ::= { rlIpFFT 3 }

rlIpFftSubnetSupported OBJECT-TYPE
    SYNTAX  INTEGER {
        supported (1),
        unsupported (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies whether subtable per IP subnet is supported."
    ::= { rlIpFFT 4 }

rlIpFftUnknownAddrMsgUsed OBJECT-TYPE
    SYNTAX  INTEGER {
        used (1),
        unused (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies whether the 3SW uses the unknown address message."
    ::= { rlIpFFT 5 }

rlIpFftAgingTimeSupported OBJECT-TYPE
    SYNTAX  INTEGER {
        supported (1),
        unsupported (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies whether aging time is supported."
    ::= { rlIpFFT 6 }

rlIpFftSrcAddrSupported OBJECT-TYPE
    SYNTAX  INTEGER {
        supported (1),
        unsupported (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies whether an IP subtable per station contains source IP address."
    ::= { rlIpFFT 7 }

rlIpFftAgingTimeout OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The aging timeout in seconds."
    ::= { rlIpFFT 8 }

rlIpFftRedBoundary OBJECT-TYPE
    SYNTAX  Percents
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The red boundary in percents."
    ::= { rlIpFFT 9 }

rlIpFftYellowBoundary OBJECT-TYPE
    SYNTAX  Percents
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The yellow boundary in percents."
    ::= { rlIpFFT 10 }

--rlIpFftPollingInterval OBJECT-TYPE
--    SYNTAX  INTEGER
--    MAX-ACCESS  read-write
--    STATUS    current
--    DESCRIPTION
--        "The polling interval for dynamic IP FFTs support in seconds."
--    ::= { rlIpFFT 11 }

--
-- The IP FFT Number Routers Table
--

rlIpFftNumTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlIpFftNumEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The (conceptual) table containing routes' numbers of
         the IP SFFTs and IP NFFTs. "
    ::= { rlIpFFT 12 }

rlIpFftNumEntry OBJECT-TYPE
    SYNTAX  RlIpFftNumEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry (conceptual row) containing the containing routes' numbers
         of IP SFFT and IP NFFT "
    INDEX  { rlIpFftNumIndex }
    ::= { rlIpFftNumTable 1 }

RlIpFftNumEntry ::= SEQUENCE {
    rlIpFftNumIndex             INTEGER,
    rlIpFftNumStnRoutesNumber   INTEGER,
    rlIpFftNumSubRoutesNumber   INTEGER
}

rlIpFftNumIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the index of the IP FFT. "
    ::= { rlIpFftNumEntry 1 }

rlIpFftNumStnRoutesNumber OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of routes that are contained in the IP SFFT. "
    ::= { rlIpFftNumEntry 2 }

rlIpFftNumSubRoutesNumber OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of routes that are contained in the IP NFFT. "
    ::= { rlIpFftNumEntry 3 }

--
-- The IP Fast Forwarding Table per station
--

rlIpFftStnTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlIpFftStnEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The (conceptual) table contains IP Fast Forwarding information
         per station for IP datagrams. "
    ::= { rlIpFFT 13 }

rlIpFftStnEntry OBJECT-TYPE
    SYNTAX  RlIpFftStnEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry (conceptual row) contains the IP fast forwarding
          information for IP datagrams from a particular source and
          destination addresses."
    INDEX  { rlIpFftStnIndex, rlIpFftStnMrid, rlIpFftStnDstIpAddress }
    ::= { rlIpFftStnTable 1 }

RlIpFftStnEntry ::= SEQUENCE {
    rlIpFftStnIndex          INTEGER,
    rlIpFftStnMrid           INTEGER,
    rlIpFftStnDstIpAddress   IpAddress,
    rlIpFftStnDstRouteIpMask IpAddress,
    rlIpFftStnDstIpAddrType  INTEGER,
    rlIpFftStnDstMacAddress  PhysAddress,
    rlIpFftStnSrcMacAddress  PhysAddress,
    rlIpFftStnOutIfIndex     INTEGER,
    rlIpFftStnVid            INTEGER,
    rlIpFftStnTaggedMode     INTEGER,
    rlIpFftStnAge            INTEGER
}

rlIpFftStnIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the index of the IP FFT. "
    ::= { rlIpFftStnEntry 1 }

rlIpFftStnMrid OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The router's Instance Identifier in the SFFT. "
    ::= { rlIpFftStnEntry 2 }

rlIpFftStnDstIpAddress OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The IP destination address for which this entry
         contains IP forwarding information."
    ::= { rlIpFftStnEntry 3 }

rlIpFftStnDstRouteIpMask OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "The IP destination mask for which this entry
          contains IP forwarding information."
    ::= { rlIpFftStnEntry 4 }

rlIpFftStnDstIpAddrType OBJECT-TYPE
    SYNTAX  INTEGER {
        local (1),
        remote (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The IP destination address type. "
 ::= { rlIpFftStnEntry 5 }

rlIpFftStnDstMacAddress OBJECT-TYPE
    SYNTAX  PhysAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The MAC destination address."
    ::= { rlIpFftStnEntry 6}

rlIpFftStnSrcMacAddress OBJECT-TYPE
    SYNTAX  PhysAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The MAC source address."
    ::= { rlIpFftStnEntry 7 }

rlIpFftStnOutIfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of ifIndex of output physical port."
    ::= { rlIpFftStnEntry 8 }

rlIpFftStnVid  OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The vid of the output port."
    ::= { rlIpFftStnEntry 9 }

rlIpFftStnTaggedMode OBJECT-TYPE
    SYNTAX  INTEGER {
        untagged  (1),
        tagged           (2),
        basedPortConfig  (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The tagged value of the port. When the Tagged field is not
         a part of the FFT table in the ASIC,
         the Tagged field gets the BasedPortConfig value "
    ::= { rlIpFftStnEntry 10 }

rlIpFftStnAge OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The age of the entry in seconds from the inserting."
    ::= { rlIpFftStnEntry 11 }

--
-- The IP Fast Forwarding Table per subnet
--

rlIpFftSubTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlIpFftSubEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The (conceptual) table containing IP Fast Forwarding information
         per subnet for IP datagrams. "
    ::= { rlIpFFT 14 }

rlIpFftSubEntry OBJECT-TYPE
    SYNTAX  RlIpFftSubEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry (conceptual row) containing the IP fast forwarding
         information for IP datagrams from a particular source and
         destination addresses."
    INDEX  { rlIpFftSubMrid , rlIpFftSubDstIpSubnet, rlIpFftSubDstIpMask }

    ::= { rlIpFftSubTable 1 }

RlIpFftSubEntry ::= SEQUENCE {
    rlIpFftSubMrid          INTEGER,
    rlIpFftSubDstIpSubnet   IpAddress,
    rlIpFftSubDstIpMask     IpAddress,
    rlIpFftSubNextHopSetRefCount INTEGER,
    rlIpFftSubNextHopCount       INTEGER,
    rlIpFftSubNextHopIfindex1    INTEGER,
    rlIpFftSubNextHopIpAddr1     IpAddress,
    rlIpFftSubNextHopIfindex2    INTEGER,
    rlIpFftSubNextHopIpAddr2     IpAddress,
    rlIpFftSubNextHopIfindex3    INTEGER,
    rlIpFftSubNextHopIpAddr3     IpAddress,
    rlIpFftSubNextHopIfindex4    INTEGER,
    rlIpFftSubNextHopIpAddr4     IpAddress,
    rlIpFftSubNextHopIfindex5    INTEGER,
    rlIpFftSubNextHopIpAddr5     IpAddress,
    rlIpFftSubNextHopIfindex6    INTEGER,
    rlIpFftSubNextHopIpAddr6     IpAddress,
    rlIpFftSubNextHopIfindex7    INTEGER,
    rlIpFftSubNextHopIpAddr7     IpAddress,
    rlIpFftSubNextHopIfindex8    INTEGER,
    rlIpFftSubNextHopIpAddr8     IpAddress,
    rlIpFftSubAge           INTEGER
}

rlIpFftSubMrid OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The router's Instance Identifier in the NFFT. "
    ::= { rlIpFftSubEntry 1 }

rlIpFftSubDstIpSubnet OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The IP destination subnet for which this entry
         contains IP forwarding information."
    ::= { rlIpFftSubEntry 2 }

rlIpFftSubDstIpMask OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The IP destination mask for which this entry
         contains IP forwarding information."
    ::= { rlIpFftSubEntry 3 }

rlIpFftSubAge OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The age of the entry in seconds from the inserting."

    ::= { rlIpFftSubEntry 4 }

rlIpFftSubNextHopSetRefCount OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of NFFT entries that used the given NextHop set (ECMP path). "

    ::= { rlIpFftSubEntry 5 }

rlIpFftSubNextHopCount OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of used NextHops in the given NextHop set (ECMP path) for the NFFT entry. "
    ::= { rlIpFftSubEntry 6 }

rlIpFftSubNextHopIfindex1 OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The first NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
    ::= { rlIpFftSubEntry 7 }

rlIpFftSubNextHopIpAddr1 OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The first NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
    ::= { rlIpFftSubEntry 8 }

rlIpFftSubNextHopIfindex2 OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The second NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
    ::= { rlIpFftSubEntry 9 }

rlIpFftSubNextHopIpAddr2 OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The second NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
    ::= { rlIpFftSubEntry 10 }

rlIpFftSubNextHopIfindex3 OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The third NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
    ::= { rlIpFftSubEntry 11 }

rlIpFftSubNextHopIpAddr3 OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The third NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
    ::= { rlIpFftSubEntry 12 }

rlIpFftSubNextHopIfindex4 OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The fourth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
    ::= { rlIpFftSubEntry 13 }

rlIpFftSubNextHopIpAddr4 OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The fourth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
    ::= { rlIpFftSubEntry 14 }

rlIpFftSubNextHopIfindex5 OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The fifth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
    ::= { rlIpFftSubEntry 15 }

rlIpFftSubNextHopIpAddr5 OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The fifth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
    ::= { rlIpFftSubEntry 16 }

rlIpFftSubNextHopIfindex6 OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The six NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
    ::= { rlIpFftSubEntry 17 }

rlIpFftSubNextHopIpAddr6 OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The six NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
    ::= { rlIpFftSubEntry 18 }

rlIpFftSubNextHopIfindex7 OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The seven NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
    ::= { rlIpFftSubEntry 19 }

rlIpFftSubNextHopIpAddr7 OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The seven NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
    ::= { rlIpFftSubEntry 20 }

rlIpFftSubNextHopIfindex8 OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The eight NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
    ::= { rlIpFftSubEntry 21 }

rlIpFftSubNextHopIpAddr8 OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The eight NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
    ::= { rlIpFftSubEntry 22 }


--
-- The IP FFT Counters Table
--

rlIpFftCountersTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlIpFftCountersEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The (conceptual) table containing IP Counters information
         per one IP FFT."
    ::= { rlIpFFT 15 }

rlIpFftCountersEntry OBJECT-TYPE
    SYNTAX  RlIpFftCountersEntry
    MAX-ACCESS      not-accessible
    STATUS              current
    DESCRIPTION
        "An entry (conceptual row) containing the IP Counters
         information containing amount of IP datagrams passed
         by certain IP FFT."
    INDEX  { rlIpFftCountersIndex }
    ::= { rlIpFftCountersTable 1 }

RlIpFftCountersEntry ::= SEQUENCE {
    rlIpFftCountersIndex    INTEGER,
    rlIpFftInReceives       INTEGER,
    rlIpFftForwDatagrams    INTEGER,
    rlIpFftInDiscards       INTEGER
}

rlIpFftCountersIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the index of the IP FFT."
    ::= { rlIpFftCountersEntry 1 }

rlIpFftInReceives  OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The amount of received IP datagrams "
    ::= { rlIpFftCountersEntry 2 }

rlIpFftForwDatagrams OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The amount of forwarded IP datagrams "
    ::= { rlIpFftCountersEntry 3 }

rlIpFftInDiscards OBJECT-TYPE
    SYNTAX          INTEGER
    MAX-ACCESS          read-only
    STATUS              current
    DESCRIPTION
        "The amount of discarded IP datagrams "
    ::= { rlIpFftCountersEntry 4 }

--
-- The IP NextHop Table (used by NFFT and Remote SFFT)
--

rlIpFftNextHopTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlIpFftNextHopEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The (conceptual) table contains NextHop information
         used for routing IP datagrams. "
    ::= { rlIpFFT 16 }

rlIpFftNextHopEntry OBJECT-TYPE
    SYNTAX  RlIpFftNextHopEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry (conceptual row) contains the NextHop info
          information for routing IP datagrams."

    INDEX  { rlIpFftNextHopifindex, rlIpFftNextHopIpAddress }
    ::= { rlIpFftNextHopTable 1 }

RlIpFftNextHopEntry ::= SEQUENCE {
    rlIpFftNextHopifindex        INTEGER,
    rlIpFftNextHopIpAddress      IpAddress,
    rlIpFftNextHopValid          INTEGER,
    rlIpFftNextHopType           INTEGER,
    rlIpFftNextHopReferenceCount INTEGER,
    rlIpFftNextHopNetAddress     PhysAddress,
    rlIpFftNextHopVid            INTEGER,
    rlIpFftNextHopMacAddress     PhysAddress,
    rlIpFftNextHopOutIfIndex     INTEGER
}

rlIpFftNextHopifindex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the IP Interface index of the NextHop. "
    ::= { rlIpFftNextHopEntry 1 }

rlIpFftNextHopIpAddress OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The IP address of a NextHop for which an entry contains
         IP forwarding information. "
    ::= { rlIpFftNextHopEntry 2 }

rlIpFftNextHopValid OBJECT-TYPE
    SYNTAX  INTEGER {
        valid (1),
        invalid (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The NextHop Valid bit. When L2 info is missing,
         a NextHop has Invalid value. "
 ::= { rlIpFftNextHopEntry 3 }

rlIpFftNextHopType OBJECT-TYPE
    SYNTAX  INTEGER {
        local  (1),
        remote (2),
        reject (3),
        drop   (4)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The NextHop type. "
 ::= { rlIpFftNextHopEntry 4 }

rlIpFftNextHopReferenceCount OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "IF LPM is supported:
               If ecmp supported:
                 the field NextHop_ref_count used to save number
                 of NextHop SETs that use the NextHop.
               Otherwise, NextHop_ref_count used to save number of
                 NFFT entries that use the NextHop.
         IF LPM is NOT supported:
               NextHop_ref_count used to save number of
               Remote SFFT entries that use the NextHop. "
 ::= { rlIpFftNextHopEntry 5 }

rlIpFftNextHopNetAddress OBJECT-TYPE
    SYNTAX  PhysAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The NextHop Physical Address."
 ::= { rlIpFftNextHopEntry 6 }

rlIpFftNextHopVid  OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The vid of the output port."
    ::= { rlIpFftNextHopEntry 7 }

rlIpFftNextHopMacAddress OBJECT-TYPE
    SYNTAX  PhysAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The MAC destination address."
    ::= { rlIpFftNextHopEntry 8}

rlIpFftNextHopOutIfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of ifIndex of output physical port."
    ::= { rlIpFftNextHopEntry 9 }

--
-- The L2 info Table (used by NextHop and Direct SFFT)
--

rlIpFftL2InfoTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlIpFftL2InfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The (conceptual) table contains L2 information
         used for routing IP datagrams. "
    ::= { rlIpFFT 17 }

rlIpFftL2InfoEntry OBJECT-TYPE
    SYNTAX  RlIpFftL2InfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry (conceptual row) contains the L2 info
          information for routing IP datagrams."

    INDEX  { rlIpFftL2InfoIfindex, rlIpFftL2InfoDstMacAddress }
    ::= { rlIpFftL2InfoTable 1 }

RlIpFftL2InfoEntry ::= SEQUENCE {
    rlIpFftL2InfoIfindex        INTEGER,
    rlIpFftL2InfoDstMacAddress  PhysAddress,
    rlIpFftL2InfoValid          INTEGER,
    rlIpFftL2InfoType           INTEGER,
    rlIpFftL2InfoReferenceCount INTEGER,
    rlIpFftL2InfoVid            INTEGER,
    rlIpFftL2InfoSrcMacAddress  PhysAddress,
    rlIpFftL2InfoOutIfIndex     INTEGER,
    rlIpFftL2InfoTaggedMode     INTEGER
}

rlIpFftL2InfoIfindex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The VLAN Ifindex of the destination port. "
    ::= { rlIpFftL2InfoEntry 1 }

rlIpFftL2InfoDstMacAddress OBJECT-TYPE
    SYNTAX  PhysAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The MAC destination address."
    ::= { rlIpFftL2InfoEntry 2}

rlIpFftL2InfoValid OBJECT-TYPE
    SYNTAX  INTEGER {
        valid (1),
        invalid (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The L2 info entry valid bit. When L2 info is missing some information,
          an L2 info has Invalid value. "
 ::= { rlIpFftL2InfoEntry 3 }

rlIpFftL2InfoType OBJECT-TYPE
    SYNTAX  INTEGER {
        other (1),
        vlan  (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The L2 info type. With Enthernet media l2 info type is vlan.
        WIth Tunneling feature, l2 info type will be expanded. "
 ::= { rlIpFftL2InfoEntry 4 }

rlIpFftL2InfoReferenceCount OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
     "The reference count contains a number of
      NextHop entries that use this L2 info."
 ::= { rlIpFftL2InfoEntry 5 }

rlIpFftL2InfoVid OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The vid of the destination port. "
    ::= { rlIpFftL2InfoEntry 6 }

rlIpFftL2InfoSrcMacAddress OBJECT-TYPE
    SYNTAX  PhysAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The MAC source address placed to Ehernet Header of IP forwarded packet."
    ::= { rlIpFftL2InfoEntry 7}

rlIpFftL2InfoOutIfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of ifIndex of output physical port the packet is forwarded through."
    ::= { rlIpFftL2InfoEntry 8 }

rlIpFftL2InfoTaggedMode OBJECT-TYPE
    SYNTAX  INTEGER {
        untagged  (1),
        tagged           (2),
        basedPortConfig  (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The tagged value of the port. When the Tagged field is not
         a part of the FFT table in the ASIC,
         the Tagged field get the BasedPortConfig value."
    ::= { rlIpFftL2InfoEntry 9 }

---
--- rlIpxFFT
---

rlIpxFFT      OBJECT IDENTIFIER ::= { rlFFT 2 }

rlIpxFftMibVersion OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "MIB's version, the current version is 1."
    ::= { rlIpxFFT 1 }

rlIpxMaxFftNumber OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximun number of IPX FFTs. An IPX FFT gets a number
         from 1 until rlIpxMaxFftSetNumber."
    ::= { rlIpxFFT 2 }

rlIpxFftDynamicSupported OBJECT-TYPE
    SYNTAX  INTEGER {
        supported (1),
        unsupported (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies whether dynamic IPX FFTs are supported."
    ::= { rlIpxFFT 3 }

rlIpxFftNetworkSupported OBJECT-TYPE
    SYNTAX  INTEGER {
        supported (1),
        unsupported (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies whether subtable per IPX network is supported."
    ::= { rlIpxFFT 4 }

rlIpxFftUnknownAddrMsgUsed OBJECT-TYPE
    SYNTAX  INTEGER {
        used (1),
        unused (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies whether the 3SW uses the unknown address message."
    ::= { rlIpxFFT 5 }

rlIpxFftAgingTimeSupported OBJECT-TYPE
    SYNTAX  INTEGER {
        supported (1),
        unsupported (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies whether aging time is supported for subtable per station."
    ::= { rlIpxFFT 6 }

rlIpxFftSrcAddrSupported OBJECT-TYPE
    SYNTAX  INTEGER {
        supported (1),
        unsupported (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies whether an IPX subtable per station contains source
                       IPX address."
    ::= { rlIpxFFT 7 }

rlIpxFftAgingTimeout OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The aging timeout in seconds."
    ::= { rlIpxFFT 8 }

rlIpxFftRedBoundary OBJECT-TYPE
    SYNTAX  INTEGER (1..100)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The red boundary in percents."
    ::= { rlIpxFFT 9 }

rlIpxFftYellowBoundary OBJECT-TYPE
    SYNTAX  Percents
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The yellow boundary in percents."
    ::= { rlIpxFFT 10 }

--rlIpxFftPollingInterval OBJECT-TYPE
--    SYNTAX  INTEGER
--    MAX-ACCESS  read-write
--    STATUS    current
--    DESCRIPTION
--        "The polling interval for dynamic IPX FFTs support in seconds."
--    ::= { rlIpxFFT 11 }

--
-- The IPX FFT Number Routers Table
--

rlIpxFftNumTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlIpxFftNumEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The (conceptual) table containing number routes of
         the IPX Fast Forwarding Table. "
    ::= { rlIpxFFT 12 }

rlIpxFftNumEntry OBJECT-TYPE
    SYNTAX  RlIpxFftNumEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry (conceptual row) containing the containing number routes of
         of IPX SFFT and IPX NFFT "
    INDEX  { rlIpxFftNumIndex }
    ::= { rlIpxFftNumTable 1 }

RlIpxFftNumEntry ::= SEQUENCE {
    rlIpxFftNumIndex            INTEGER,
    rlIpxFftNumStnRoutesNumber  INTEGER,
    rlIpxFftNumSubRoutesNumber  INTEGER
}

rlIpxFftNumIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "The value of the index of the IPX FFT. "
    ::= { rlIpxFftNumEntry 1 }

rlIpxFftNumStnRoutesNumber OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of routes containing in the IPX SFFT. "
    ::= { rlIpxFftNumEntry 2 }

rlIpxFftNumSubRoutesNumber OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of routes containing in the IPX NFFT. "
::= { rlIpxFftNumEntry 3 }

--
-- The IPX Fast Forwarding Table per station
--

rlIpxFftStnTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlIpxFftStnEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The (conceptual) table containing IPX Fast Forwarding information
         per station for IPX. "
    ::= { rlIpxFFT 13 }

rlIpxFftStnEntry OBJECT-TYPE
    SYNTAX  RlIpxFftStnEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry (conceptual row) containing the IP fast forwarding
         information for IP datagrams from a particular source and
         destination addresses."
    INDEX  { rlIpxFftStnIndex, rlIpxFftStnDstNetid, rlIpxFftStnDstNode,
             rlIpxFftStnSrcNetid, rlIpxFftStnSrcNode }
    ::= { rlIpxFftStnTable 1 }

RlIpxFftStnEntry ::= SEQUENCE {
    rlIpxFftStnIndex            INTEGER,
    rlIpxFftStnDstNetid         NetNumber,
    rlIpxFftStnDstNode          PhysAddress,
    rlIpxFftStnSrcNetid         NetNumber,
    rlIpxFftStnSrcNode          PhysAddress,
    rlIpxFftStnDstIpxAddrType   INTEGER,
    rlIpxFftStnEncapsulation    INTEGER,
    rlIpxFftStnDstMacAddress    PhysAddress,
    rlIpxFftStnSrcMacAddress    PhysAddress,
    rlIpxFftStnOutIfIndex       INTEGER,
    rlIpxFftStnTci              INTEGER,
    rlIpxFftStnFacsIndex        INTEGER,
    rlIpxFftStnAge              INTEGER
}

rlIpxFftStnIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the index of the IPX FFT. "
    ::= { rlIpxFftStnEntry 1 }

rlIpxFftStnDstNetid OBJECT-TYPE
    SYNTAX  NetNumber
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The destination network for which this entry
         contains IPX forwarding information."
    ::= { rlIpxFftStnEntry 2 }

rlIpxFftStnDstNode OBJECT-TYPE
    SYNTAX  PhysAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The destination node for which this entry
         contains IPX forwarding information."
    ::= { rlIpxFftStnEntry 3 }

rlIpxFftStnSrcNetid OBJECT-TYPE
    SYNTAX  NetNumber
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The source network for which this entry
         contains IPX forwarding information."
    ::= { rlIpxFftStnEntry 4 }

rlIpxFftStnSrcNode OBJECT-TYPE
    SYNTAX  PhysAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The destination node for which this entry
         contains IPX forwarding information."
    ::= { rlIpxFftStnEntry 5 }

rlIpxFftStnDstIpxAddrType OBJECT-TYPE
    SYNTAX  INTEGER {
        local (1),
        remote (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The destination address type. "
    ::= { rlIpxFftStnEntry 6 }

rlIpxFftStnEncapsulation OBJECT-TYPE
    SYNTAX  INTEGER {
        novell(1),
        ethernet(2),
        llc(3),
        snap(4)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "The encapsulation method associated with this route."
    ::= { rlIpxFftStnEntry 7 }

rlIpxFftStnDstMacAddress OBJECT-TYPE
    SYNTAX  PhysAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The MAC destination address."
    ::= { rlIpxFftStnEntry 8 }

rlIpxFftStnSrcMacAddress OBJECT-TYPE
    SYNTAX  PhysAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The MAC source address."
    ::= { rlIpxFftStnEntry 9 }

rlIpxFftStnOutIfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of ifIndex of output physical port."
    ::= { rlIpxFftStnEntry 10 }

rlIpxFftStnTci OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of TCI or 0."
    ::= { rlIpxFftStnEntry 11 }

rlIpxFftStnFacsIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of index of the FACS Table."
    ::= { rlIpxFftStnEntry 12 }

rlIpxFftStnAge OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The age of the entry in seconds."
    ::= { rlIpxFftStnEntry 13 }

--
-- The IPX Fast Forwarding Table per network
--

rlIpxFftSubTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlIpxFftSubEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The (conceptual) table containing IPX Fast Forwarding information
         per network for IPX . "
    ::= { rlIpxFFT 14 }

rlIpxFftSubEntry OBJECT-TYPE
    SYNTAX  RlIpxFftSubEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry (conceptual row) containing the IP fast forwarding
         information for IP datagrams from a particular source and
         destination addresses."
    INDEX  { rlIpxFftSubIndex, rlIpxFftSubDstNetid }
    ::= { rlIpxFftSubTable 1 }

RlIpxFftSubEntry ::= SEQUENCE {
    rlIpxFftSubIndex            INTEGER,
    rlIpxFftSubDstNetid         NetNumber,
    rlIpxFftSubEncapsulation    INTEGER,
    rlIpxFftSubDstMacAddress    PhysAddress,
    rlIpxFftSubSrcMacAddress    PhysAddress,
    rlIpxFftSubOutIfIndex       INTEGER,
    rlIpxFftSubTci              INTEGER,
    rlIpxFftSubFacsIndex        INTEGER,
    rlIpxFftSubAge              INTEGER
}

rlIpxFftSubIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the index of the IPX FFT. "
    ::= { rlIpxFftSubEntry 1 }

rlIpxFftSubDstNetid OBJECT-TYPE
    SYNTAX  NetNumber
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The destination network for which this entry
         contains IPX forwarding information."
    ::= { rlIpxFftSubEntry 2 }

rlIpxFftSubEncapsulation OBJECT-TYPE
    SYNTAX  INTEGER {
        novell(1),
        ethernet(2),
        llc(3),
        snap(4)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The encapsulation method associated with this route."
    ::= { rlIpxFftSubEntry 3 }

rlIpxFftSubDstMacAddress OBJECT-TYPE
    SYNTAX  PhysAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The MAC destination address."
    ::= { rlIpxFftSubEntry 4 }

rlIpxFftSubSrcMacAddress OBJECT-TYPE
    SYNTAX  PhysAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The MAC source address."
    ::= { rlIpxFftSubEntry 5 }

rlIpxFftSubOutIfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of ifIndex of output physical port."
    ::= { rlIpxFftSubEntry 6 }

rlIpxFftSubTci OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of TCI or 0."
    ::= { rlIpxFftSubEntry 7 }

rlIpxFftSubFacsIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of index of the FACS Table."
    ::= { rlIpxFftSubEntry 8 }

rlIpxFftSubAge OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The age of the entry in seconds."
    ::= { rlIpxFftSubEntry 9 }

--
-- The IPX FFT Counters Table
--

rlIpxFftCountersTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlIpxFftCountersEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The (conceptual) table containing IPX Counters information
         per one IPX FFT."
    ::= { rlIpxFFT 15 }

rlIpxFftCountersEntry OBJECT-TYPE
    SYNTAX  RlIpxFftCountersEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry (conceptual row) containing the IP Counters
         information containing amount of IPX datagrams passed
         by certain IPX FFT."
    INDEX  { rlIpxFftCountersIndex }
    ::= { rlIpxFftCountersTable 1 }

RlIpxFftCountersEntry ::= SEQUENCE {
    rlIpxFftCountersIndex   INTEGER,
    rlIpxFftInReceives      INTEGER,
    rlIpxFftForwDatagrams   INTEGER,
    rlIpxFftInDiscards      INTEGER
}

rlIpxFftCountersIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the index of the IPX FFT."
    ::= { rlIpxFftCountersEntry 1 }

rlIpxFftInReceives  OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The amount of received IPX datagrams "
    ::= { rlIpxFftCountersEntry 2 }

rlIpxFftForwDatagrams OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The amount of forwarded IPX datagrams "
    ::= { rlIpxFftCountersEntry 3 }

rlIpxFftInDiscards OBJECT-TYPE
    SYNTAX          INTEGER
    MAX-ACCESS          read-only
    STATUS              current
    DESCRIPTION
        "The amount of discarded IPX datagrams "
    ::= { rlIpxFftCountersEntry 4 }

---
--- rlIpmFFT
---

rlIpmFFT    OBJECT IDENTIFIER ::= { rlFFT 3 }

rlIpmFftMibVersion OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "MIB's version, the current version is 1."
    ::= { rlIpmFFT 1 }

rlIpmMaxFftNumber OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximun number of IPM FFTs. NT_IPM  gets a number
         from Host Parameters"
    ::= { rlIpmFFT 2 }

rlIpmFftDynamicSupported OBJECT-TYPE
    SYNTAX  INTEGER {
        supported   (1),
        unsupported (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies whether dynamic IPM FFTs are supported.
         An NT_IPM  gets a number  from Host Parameters"
    ::= { rlIpmFFT 3 }

rlIpmFftUnknownAddrMsgUsed OBJECT-TYPE
    SYNTAX  INTEGER {
        used   (1),
        unused (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies whether the 3SW uses the unknown address message.
         An NT_IPM  gets a number  from Host Parameters"
    ::= { rlIpmFFT 4 }

rlIpmFftUserAgingTimeout OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The aging timeout in seconds. SNMP user writes.
         There is a default value of aging timeout."
    ::= { rlIpmFFT 5 }

rlIpmFftRouterAgingTimeout OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The aging timeout in seconds. NT_IPM keeps value that
         Router level gave. This is high priority value for aging timeout."
    ::= { rlIpmFFT 6 }

--rlIpmFftPollingInterval OBJECT-TYPE
--    SYNTAX  INTEGER
--    MAX-ACCESS  read-only
--    STATUS    current
--    DESCRIPTION
--        "The polling interval  for dynamic IPM FFT's support in seconds."
--    ::= { rlIpmFFT 7 }


--
-- The IPM FFT Number Routers Table
--

rlIpmFftNumTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlIpmFftNumEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The (conceptual) table containing number routes of
         the IPM Fast Forwarding Table. "
    ::= { rlIpmFFT 8 }

rlIpmFftNumEntry OBJECT-TYPE
    SYNTAX      RlIpmFftNumEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry (conceptual row) containing the containing number routes of
         an IPM FFT."
    INDEX  { rlIpmFftNumIndex }
  ::= { rlIpmFftNumTable 1 }

RlIpmFftNumEntry ::= SEQUENCE {
    rlIpmFftNumIndex            INTEGER,
    rlIpmFftNumRoutesNumber     INTEGER
}

rlIpmFftNumIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the index of the IPM FFT."
    ::= { rlIpmFftNumEntry 1 }

rlIpmFftNumRoutesNumber OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of routes containing in the IPM FFT."
    ::= { rlIpmFftNumEntry 2 }

--
-- The IPM Fast Forwarding Table
--

rlIpmFftTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlIpmFftEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The (conceptual) table containing IPM Fast Forwarding information
         for IPM datagrams."
    ::= { rlIpmFFT 9 }

rlIpmFftEntry OBJECT-TYPE
    SYNTAX  RlIpmFftEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry (conceptual row) containing the IPM fast forwarding
         information for IP datagrams from a particular source and
         destination addresses."
    INDEX  { rlIpmFftIndex, rlIpmFftSrcIpAddress, rlIpmFftDstIpAddress }
    ::= { rlIpmFftTable 1 }

RlIpmFftEntry ::= SEQUENCE {
    rlIpmFftIndex           INTEGER,
    rlIpmFftSrcIpAddress    IpAddress,
    rlIpmFftDstIpAddress    IpAddress,
    rlIpmFftSrcIpMask       IpAddress,
    rlIpmFftInputIfIndex    INTEGER,
    rlIpmFftInputVlanTag    INTEGER,
    rlIpmFftForwardAction   INTEGER,
    rlIpmFftInportAction    INTEGER,
    rlIpmFftAge             INTEGER
}

rlIpmFftIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the index of the IPM FFT. "
    ::= { rlIpmFftEntry 1 }

rlIpmFftSrcIpAddress OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The IP source address for which this entry
         contains IPM forwarding information."
    ::= { rlIpmFftEntry 2 }

rlIpmFftDstIpAddress OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The IPM destination address for which this entry
         contains IPM forwarding information."
    ::= { rlIpmFftEntry 3 }

rlIpmFftSrcIpMask OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "The IP source mask for which this entry
          contains IP forwarding information."
    ::= { rlIpmFftEntry 4 }

rlIpmFftInputIfIndex    OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The input ifIndex for which this entry
         contains IPM forwarding information."
    ::= { rlIpmFftEntry 5 }

rlIpmFftInputVlanTag    OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The input Vlan tag together with input ifIndex defines
          pair (ifIndex, tag)"
    ::= { rlIpmFftEntry 6 }

rlIpmFftForwardAction   OBJECT-TYPE
    SYNTAX  INTEGER {
        forward(1),
        discard (2)
    }
    MAX-ACCESS          read-only
    STATUS              current
    DESCRIPTION
        "The IPM forward action."
    ::= { rlIpmFftEntry 7 }

rlIpmFftInportAction    OBJECT-TYPE
    SYNTAX  INTEGER {
        sentToCPU(1),
        discard (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The IPM illegal input port action."
    ::= { rlIpmFftEntry 8 }

rlIpmFftAge OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The age of the entry in seconds from the moment of inserting. "
    ::= { rlIpmFftEntry 9 }

--
-- The IPM FFT Output Port and Tag Table
--

rlIpmFftPortTagTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlIpmFftPortTagEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The (conceptual) table containing IPM FFT output port tag information
         for IPM datagrams."
    ::= { rlIpmFFT 10 }

rlIpmFftPortTagEntry OBJECT-TYPE
    SYNTAX  RlIpmFftPortTagEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry (conceptual row) containing the IPM FFT output port tag
         information for IP datagrams from a particular source and
         destination addresses."
    INDEX  { rlIpmFftPortIndex, rlIpmFftPortSrcIpAddress,
             rlIpmFftPortDstIpAddress, rlIpmFftPortOutputifIndex,
             rlIpmFftPortOutputTag }
    ::= { rlIpmFftPortTagTable 1 }

RlIpmFftPortTagEntry ::= SEQUENCE {
    rlIpmFftPortIndex           INTEGER,
    rlIpmFftPortSrcIpAddress    IpAddress,
    rlIpmFftPortDstIpAddress    IpAddress,
    rlIpmFftPortOutputifIndex   INTEGER,
    rlIpmFftPortOutputTag       INTEGER
}

rlIpmFftPortIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the index of the IPM FFT. "
    ::= { rlIpmFftPortTagEntry 1 }

rlIpmFftPortSrcIpAddress OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The IP source address for which this entry
         contains IPM output port tag information."
    ::= { rlIpmFftPortTagEntry 2 }

rlIpmFftPortDstIpAddress OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The IPM destination address for which this entry
         contains IPM port tag information."
    ::= { rlIpmFftPortTagEntry 3 }

rlIpmFftPortOutputifIndex   OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The output ifIndex "
    ::= { rlIpmFftPortTagEntry 4 }

rlIpmFftPortOutputTag   OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The output Vlan tag together with output ifIndex defines
          pair (ifIndex, tag)"
    ::= { rlIpmFftPortTagEntry 5 }

--
-- The IPM FFT Counters Table
--

rlIpmFftCountersTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlIpmFftCountersEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The (conceptual) table containing IPM Counters information
         per FFT number. "
    ::= { rlIpmFFT 11 }

rlIpmFftCountersEntry OBJECT-TYPE
    SYNTAX  RlIpmFftCountersEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry (conceptual row) containing the IPM Counters
         information containing amount of IPM datagrams passed by certain FFT."
    INDEX  { rlIpmFftCountersIndex }
    ::= { rlIpmFftCountersTable 1 }

RlIpmFftCountersEntry ::= SEQUENCE {
    rlIpmFftCountersIndex       INTEGER,
    rlIpmFftInReceives          INTEGER,
    rlIpmFftForwDatagrams       INTEGER,
    rlIpmFftInDiscards          INTEGER
}

rlIpmFftCountersIndex OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the index of the IPM FFT. "
    ::= { rlIpmFftCountersEntry 1 }

rlIpmFftInReceives  OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The amount of received IPM datagrams "
    ::= { rlIpmFftCountersEntry 2 }

rlIpmFftForwDatagrams OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The amount of forwarded IPM datagrams "
    ::= { rlIpmFftCountersEntry 3 }

rlIpmFftInDiscards OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The amount of discarded IPM datagrams "
    ::= { rlIpmFftCountersEntry 4 }

END