BAY-STACK-ADAC-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32 FROM SNMPv2-SMI TruthValue, MacAddress, RowStatus FROM SNMPv2-TC InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB bayStackMibs FROM SYNOPTICS-ROOT-MIB; bayStackAdacMib MODULE-IDENTITY LAST-UPDATED "200610160000Z" ORGANIZATION "Nortel Networks" CONTACT-INFO "Nortel Networks" DESCRIPTION "Nortel Networks Auto-Discovery/Auto-Configuration of Nortel IP Phones MIB Copyright 2004 Nortel Networks, Inc. All rights reserved. This Nortel Networks SNMP Management Information Base Specification embodies Nortel Networks' confidential and proprietary intellectual property. Nortel Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." REVISION "200610160000Z" -- 16 October 2006 DESCRIPTION "v5: Added bsAdacPortOperEnable, bsAdacPortMacDetectionEnable, bsAdacPortLldpDetectionEnable, bsAdacPortOperDisabledNotification" REVISION "200605240000Z" -- 24 May 2006 DESCRIPTION "v4: Removed untagAll enumeration." REVISION "200603130000Z" -- 13 March 2006 DESCRIPTION "v3: Added bsAdacOperEnable, bsAdacPortTaggedFramesPvid, bsAdacPortTaggedFramesTagging and bsAdacPortType" REVISION "200504120000Z" -- 12 April 2005 DESCRIPTION "v2: Added support for MAC Address Ranges" REVISION "200412130000Z" -- 13 December 2004 DESCRIPTION "v1: Initial version." ::= { bayStackMibs 9 } bsAdacNotifications OBJECT IDENTIFIER ::= { bayStackAdacMib 0 } bsAdacObjects OBJECT IDENTIFIER ::= { bayStackAdacMib 1 } -- -- ADAC Scalar Objects -- bsAdacScalars OBJECT IDENTIFIER ::= { bsAdacObjects 1 } bsAdacAdminEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to administratively enable or disable ADAC. A value of true(1) means ADAC should be enabled, while a value of false(2) means ADAC should be disabled. Note that ADAC might remain operationally disabled due to other conditions (such as missing Uplink and Call Server ports). To determine whether ADAC is operationally enabled, see bsAdacOperEnable." ::= { bsAdacScalars 2 } bsAdacOperatingMode OBJECT-TYPE SYNTAX INTEGER { untaggedFramesBasic(1), untaggedFramesAdvanced(2), taggedFrames(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This operating mode must be set depending on how the IP Phones are configured to send frames (tagged/untagged) and on the desired level of complexity for auto-configuration. A value of untaggedFramesBasic(1) means that the IP Phones are configured to send untagged frames and no Voice-VLAN will be created (only apply QoS). A value of untaggedFramesAdvanced(2) means that the IP Phones are configured to send untagged frames and the Voice-VLAN will be created too, beside applying QoS. A value of taggedFrames(3) means that the IP Phones are configured to send tagged frames; the Voice-VLAN will be created and QoS will be applied accordingly. This object cannot take the value untaggedFramesAdvanced(2) or taggedFrames(3) if bsAdacVoiceVlan has the value 0, or if both bsAdacCallServerPort and bsAdacUplinkPort have the value 0." ::= { bsAdacScalars 3 } bsAdacCallServerPort OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "The port on which the Call Server is connected. This value is used only when the current operating mode is either untaggedFramesAdvanced(2) or taggedFrames(3). It may not be changed to 0 if the current operating mode is one of these values." ::= { bsAdacScalars 4 } bsAdacUplinkPort OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "The uplink port is used usually when the Call Server is not connected directly to the current module/stack. This value is used only when the current operating mode is either untaggedFramesAdvanced(2) or taggedFrames(3). It may not be changed to 0 if the current operating mode is one of these values." ::= { bsAdacScalars 5 } bsAdacVoiceVlan OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "A value that uniquely identifies the Voice Virtual LAN associated with ADAC. This value it is used only when the current operating mode is untaggedFramesAdvanced(2) or taggedFrames(3). It may not be changed to 0 if the current operating mode is one of these values." ::= { bsAdacScalars 6 } bsAdacNotificationControlEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls whether port status changes will result in generation of a bsAdacPortConfigNotification. The value true(1) means that the notifications will be generated. The value false(2) means that they will not be generated." ::= { bsAdacScalars 7 } bsAdacMacAddrRangeControl OBJECT-TYPE SYNTAX INTEGER { none(1), clearTable(2), defaultTable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object always returns none(1) when retrieved. When set to clearTable(2), it will delete all entries from the bsAdacMacAddrRangeTable. When set to defaultTable(3), it will delete all entries from the bsAdacMacAddrRangeTable and replace them with factory default entries." ::= { bsAdacScalars 8 } bsAdacOperEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether ADAC is operationally enabled. A value of true(1) indicates that it is enabled, while a value of false(2) indicates that it is disabled. Note a value of false(2) for this object and a value of true(1) for bsAdacAdminEnable indicates that ADAC is not operational due to some condition such as missing Uplink and Call Server ports." ::= { bsAdacScalars 9 } -- -- ADAC Port Table -- bsAdacPortTable OBJECT-TYPE SYNTAX SEQUENCE OF BsAdacPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of objects that display and control the port attributes of ADAC." ::= { bsAdacObjects 2 } bsAdacPortEntry OBJECT-TYPE SYNTAX BsAdacPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of objects that display and control the port attributes of ADAC." INDEX { bsAdacPortIndex } ::= { bsAdacPortTable 1 } BsAdacPortEntry ::= SEQUENCE { bsAdacPortIndex InterfaceIndex, bsAdacPortAdminEnable TruthValue, bsAdacPortConfigStatus INTEGER, bsAdacPortTaggedFramesPvid Integer32, bsAdacPortTaggedFramesTagging INTEGER, bsAdacPortType INTEGER, bsAdacPortOperEnable TruthValue, bsAdacPortMacDetectionEnable TruthValue, bsAdacPortLldpDetectionEnable TruthValue } bsAdacPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2." ::= { bsAdacPortEntry 1 } bsAdacPortAdminEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "true (1) Auto-Detection (and implicitly Auto-Configuration) of Nortel IP Phones is enabled on this interface. false (2) Auto-Detection (and implicitly Auto-Configuration) of Nortel IP Phones is disabled on this interface." ::= { bsAdacPortEntry 2 } bsAdacPortConfigStatus OBJECT-TYPE SYNTAX INTEGER { configApplied(1), configNotApplied(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the Auto-Configuration status for the port. A value of configApplied(1) means that the ADAC configuration is applied for this port. A value of configNotApplied(2) means that the ADAC configuration is not applied for this port." ::= { bsAdacPortEntry 3 } bsAdacPortTaggedFramesPvid OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the PVID value that Auto-Configuration will try to apply for ports which have Auto-Detection enabled (bsAdacPortAdminEnable is set to true(1)), and which are running in Tagged-Frames operational mode (bsAdacOperatingMode is set to taggedFrames(3)). A value of 0 means that the Auto-Configuration will not change the PVID of the respective port. If the VLAN with the ID equal with this PVID does not exist when Auto-Configuration is applied to a port, then Auto-Configuration won't change the port's PVID (it will ignore the current value of this object, and treat it as if its value is currently 0)." ::= { bsAdacPortEntry 4 } bsAdacPortTaggedFramesTagging OBJECT-TYPE SYNTAX INTEGER { tagAll(1), tagPvidOnly(2), untagPvidOnly(3), noChange(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the tagging value that Auto-Configuration will apply for ports which have Auto-Detection enabled (bsAdacPortAdminEnable is set to true(1)), and which are running in Tagged-Frames operational mode (bsAdacOperatingMode is set to taggedFrames(3)). A value of tagAll(1) means that the Telephony ports will have the tagging enabled on all frames. A value of tagPvidOnly(2) means that the Telephony ports will have the tagging enabled on frames matching the PVID of the port. A value of untagPvidOnly(3) means that the Telephony ports will have the tagging disabled on frames matching the PVID of the port. A value of noChange(4) means that the Auto-Configuration will not change the tagging of the respective port." ::= { bsAdacPortEntry 5 } bsAdacPortType OBJECT-TYPE SYNTAX INTEGER { telephony(1), callServer(2), uplink(3), other(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describes how ADAC classifies this port. A value of telephony(1) means that the Auto-Detection is enabled for this port (bsAdacPortAdminEnable is set to true(1)). A value of callServer(2) means that the port is configured as Call Server. A value of uplink(3) means that the port is either configured as Uplink or it's part of the same trunk as the current set Uplink port. A value of other(4) means that the port has none of the types above." ::= { bsAdacPortEntry 6 } bsAdacPortOperEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether Auto-Detection is operationally enabled on port. A value of true(1) indicates that it is enabled, while a value of false(2) indicates that it is disabled. Note a value of false(2) for this object and a value of true(1) for bsAdacPortAdminEnable indicates that Auto-Detection (and implicitly Auto-Configuration) is not operational due to some condition such as reaching the maximum number of devices supported per port." ::= { bsAdacPortEntry 7 } bsAdacPortMacDetectionEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "true (1) Auto-Detection of Nortel IP Phones based on MAC Address is enabled on this interface. false (2) Auto-Detection of Nortel IP Phones based on MAC Address is disabled on this interface. It cannot be set to false(2) if no other supported detection mechanism is enabled on port." ::= { bsAdacPortEntry 8 } bsAdacPortLldpDetectionEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "true (1) Auto-Detection of Nortel IP Phones based on 802.1ab is enabled on this interface. false (2) Auto-Detection of Nortel IP Phones based on 802.1ab is disabled on this interface. It cannot be set to false(2) if no other supported detection mechanism is enabled on port." ::= { bsAdacPortEntry 9 } -- -- ADAC MAC Address Range Table -- bsAdacMacAddrRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF BsAdacMacAddrRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of objects that display and control the attributes of the MAC Address ranges supported by ADAC. Overlapping ranges are not allowed and the attempts to create an entry that overlaps an existing entry will fail." ::= { bsAdacObjects 3 } bsAdacMacAddrRangeEntry OBJECT-TYPE SYNTAX BsAdacMacAddrRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of objects that display and control the attributes of the MAC Address ranges supported by ADAC." INDEX { bsAdacMacAddrRangeLowEndIndex, bsAdacMacAddrRangeHighEndIndex } ::= { bsAdacMacAddrRangeTable 1 } BsAdacMacAddrRangeEntry ::= SEQUENCE { bsAdacMacAddrRangeLowEndIndex MacAddress, bsAdacMacAddrRangeHighEndIndex MacAddress, bsAdacMacAddrRangeRowStatus RowStatus } bsAdacMacAddrRangeLowEndIndex OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The low end of the MAC Address range." ::= { bsAdacMacAddrRangeEntry 1 } bsAdacMacAddrRangeHighEndIndex OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The high end of the MAC Address range." ::= { bsAdacMacAddrRangeEntry 2 } bsAdacMacAddrRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to control creation/deletion of entries in this table." ::= { bsAdacMacAddrRangeEntry 3 } -- -- ADAC Notifications Section -- bsAdacPortConfigNotification NOTIFICATION-TYPE OBJECTS { bsAdacPortConfigStatus } STATUS current DESCRIPTION "This notification indicates if the Auto-Configuration is applied or not on the port. It will be sent on every status change." ::= { bsAdacNotifications 1 } bsAdacPortOperDisabledNotification NOTIFICATION-TYPE OBJECTS { bsAdacPortOperEnable } STATUS current DESCRIPTION "This notification indicates if a port having bsAdacPortAdminEnable set to true(1) changes its bsAdacPortOperEnable from true(1) to false(2) due to some condition such as reaching the maximum number of devices supported per port." ::= { bsAdacNotifications 2 } END