-- ***************************************************************** -- CISCO-CDP-MIB.my: CDP MIB file -- -- Oct 1994, Arun Sastry -- November 2001, Edward Pham -- -- Copyright (c) 1994-1998, 1999, 2001 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** -- CISCO-CDP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TruthValue, DisplayString, TimeStamp FROM SNMPv2-TC ciscoMgmt FROM CISCO-SMI CiscoNetworkProtocol, CiscoNetworkAddress, Unsigned32 FROM CISCO-TC VlanIndex FROM CISCO-VTP-MIB ifIndex FROM IF-MIB ; ciscoCdpMIB MODULE-IDENTITY LAST-UPDATED "200111230000Z" ORGANIZATION "Cisco System Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 West Tasman Drive, San Jose CA 95134-1706. USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com" DESCRIPTION "The MIB module for management of the Cisco Discovery Protocol in Cisco devices." REVISION "200111230000Z" DESCRIPTION "Added cdpInterfaceExtTable which contains the following objects: cdpInterfaceExtendedTrust, cdpInterfaceCosForUntrustedPort." REVISION "200104230000Z" DESCRIPTION "Added the following objects: cdpGlobalDeviceIdFormatCpb, cdpGlobalDeviceIdFormat." REVISION "200011220000Z" DESCRIPTION "Added the following objects: cdpCacheApplianceID, cdpCacheVlanID, cdpCachePowerConsumption, cdpCacheMTU, cdpCachePrimaryMgmtAddrType, cdpCachePrimaryMgmtAddr, cdpCacheSecondaryMgmtAddrType, cdpCacheSecondaryMgmtAddr, cdpCacheLastChange, cdpCachePhysLocation, cdpCacheSysName, cdpCacheSysObjectID, cdpGlobalLastChange" REVISION "9812100000Z" DESCRIPTION "Added cdpGlobalDeviceId object." REVISION "9809160000Z" DESCRIPTION "added these objects to cdpCacheTable: cdpCacheVTPMgmtDomain, cdpCacheNativeVLAN, cdpCacheDuplex. " REVISION "9607080000Z" DESCRIPTION "Obsolete cdpInterfaceMessageInterval and newly define cdpGlobal object." REVISION "9508150000Z" DESCRIPTION "Specify a correct (non-negative) range for several index objects." REVISION "9507270000Z" DESCRIPTION "Correct range of cdpInterfaceMessageInterval." REVISION "9501250000Z" DESCRIPTION "Move from ciscoExperiment to ciscoMgmt oid subtree." ::= { ciscoMgmt 23 } ciscoCdpMIBObjects OBJECT IDENTIFIER ::= { ciscoCdpMIB 1 } cdpInterface OBJECT IDENTIFIER ::= { ciscoCdpMIBObjects 1 } cdpCache OBJECT IDENTIFIER ::= { ciscoCdpMIBObjects 2 } cdpGlobal OBJECT IDENTIFIER ::= { ciscoCdpMIBObjects 3 } -- -- The CDP Interface Group -- cdpInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF CdpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing the status of CDP on the device's interfaces." ::= { cdpInterface 1 } cdpInterfaceEntry OBJECT-TYPE SYNTAX CdpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the cdpInterfaceTable, containing the status of CDP on an interface." INDEX { cdpInterfaceIfIndex } ::= { cdpInterfaceTable 1 } CdpInterfaceEntry ::= SEQUENCE { cdpInterfaceIfIndex Integer32, cdpInterfaceEnable TruthValue, cdpInterfaceMessageInterval INTEGER, cdpInterfaceGroup Integer32, cdpInterfacePort Integer32 } cdpInterfaceIfIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of the local interface. For 802.3 Repeaters on which the repeater ports do not have ifIndex values assigned, this value is a unique value for the port, and greater than any ifIndex value supported by the repeater; in this case, the specific port is indicated by corresponding values of cdpInterfaceGroup and cdpInterfacePort, where these values correspond to the group number and port number values of RFC 1516." ::= { cdpInterfaceEntry 1 } cdpInterfaceEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of whether the Cisco Discovery Protocol is currently running on this interface. This variable has no effect when CDP is disabled (cdpGlobalRun = FALSE)." ::= { cdpInterfaceEntry 2 } cdpInterfaceMessageInterval OBJECT-TYPE SYNTAX INTEGER (5..254) UNITS "seconds" MAX-ACCESS read-write STATUS obsolete -- replaced by cdpGlobalMessageInterval -- this object should be applied to the -- whole system instead of per interface DESCRIPTION "The interval at which CDP messages are to be generated on this interface. The default value is 60 seconds." ::= { cdpInterfaceEntry 3 } cdpInterfaceGroup OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is only relevant to interfaces which are repeater ports on 802.3 repeaters. In this situation, it indicates the RFC1516 group number of the repeater port which corresponds to this interface." ::= { cdpInterfaceEntry 4 } cdpInterfacePort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is only relevant to interfaces which are repeater ports on 802.3 repeaters. In this situation, it indicates the RFC1516 port number of the repeater port which corresponds to this interface." ::= { cdpInterfaceEntry 5 } cdpInterfaceExtTable OBJECT-TYPE SYNTAX SEQUENCE OF CdpInterfaceExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the additional CDP configuration on the device's interfaces." ::= { cdpInterface 2 } cdpInterfaceExtEntry OBJECT-TYPE SYNTAX CdpInterfaceExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the cdpInterfaceExtTable contains the values configured for Extented Trust TLV and COS (Class of Service) for Untrusted Ports TLV on an interface which supports the sending of these TLVs." INDEX { ifIndex } ::= { cdpInterfaceExtTable 1 } CdpInterfaceExtEntry ::= SEQUENCE { cdpInterfaceExtendedTrust INTEGER, cdpInterfaceCosForUntrustedPort Unsigned32 } cdpInterfaceExtendedTrust OBJECT-TYPE SYNTAX INTEGER { trusted(1), noTrust(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the value to be sent by Extended Trust TLV. If trusted(1) is configured, the value of Extended Trust TLV is one byte in length with its least significant bit equal to 1 to indicate extended trust. All other bits are 0. If noTrust(2) is configured, the value of Extended Trust TLV is one byte in length with its least significant bit equal to 0 to indicate no extended trust. All other bits are 0." ::= { cdpInterfaceExtEntry 1 } cdpInterfaceCosForUntrustedPort OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the value to be sent by COS for Untrusted Ports TLV." ::= { cdpInterfaceExtEntry 2 } -- -- The CDP Address Cache Group -- cdpCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF CdpCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing the cached information obtained via receiving CDP messages." ::= { cdpCache 1 } cdpCacheEntry OBJECT-TYPE SYNTAX CdpCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the cdpCacheTable, containing the information received via CDP on one interface from one device. Entries appear when a CDP advertisement is received from a neighbor device. Entries disappear when CDP is disabled on the interface, or globally." INDEX { cdpCacheIfIndex, cdpCacheDeviceIndex } ::= { cdpCacheTable 1 } CdpCacheEntry ::= SEQUENCE { cdpCacheIfIndex Integer32, cdpCacheDeviceIndex Integer32, cdpCacheAddressType CiscoNetworkProtocol, cdpCacheAddress CiscoNetworkAddress, cdpCacheVersion DisplayString, cdpCacheDeviceId DisplayString, cdpCacheDevicePort DisplayString, cdpCachePlatform DisplayString, cdpCacheCapabilities OCTET STRING, cdpCacheVTPMgmtDomain DisplayString, cdpCacheNativeVLAN VlanIndex, cdpCacheDuplex INTEGER, cdpCacheApplianceID Unsigned32, cdpCacheVlanID Unsigned32, cdpCachePowerConsumption Unsigned32, cdpCacheMTU Unsigned32, cdpCacheSysName DisplayString, cdpCacheSysObjectID OBJECT IDENTIFIER, cdpCachePrimaryMgmtAddrType CiscoNetworkProtocol, cdpCachePrimaryMgmtAddr CiscoNetworkAddress, cdpCacheSecondaryMgmtAddrType CiscoNetworkProtocol, cdpCacheSecondaryMgmtAddr CiscoNetworkAddress, cdpCachePhysLocation DisplayString, cdpCacheLastChange TimeStamp } cdpCacheIfIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Normally, the ifIndex value of the local interface. For 802.3 Repeaters for which the repeater ports do not have ifIndex values assigned, this value is a unique value for the port, and greater than any ifIndex value supported by the repeater; the specific port number in this case, is given by the corresponding value of cdpInterfacePort." ::= { cdpCacheEntry 1 } cdpCacheDeviceIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value for each device from which CDP messages are being received." ::= { cdpCacheEntry 2 } cdpCacheAddressType OBJECT-TYPE SYNTAX CiscoNetworkProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of the type of address contained in the corresponding instance of cdpCacheAddress." ::= { cdpCacheEntry 3 } cdpCacheAddress OBJECT-TYPE SYNTAX CiscoNetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The (first) network-layer address of the device's SNMP-agent as reported in the Address TLV of the most recently received CDP message. For example, if the corresponding instance of cacheAddressType had the value 'ip(1)', then this object would be an IP-address." ::= { cdpCacheEntry 4 } cdpCacheVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Version string as reported in the most recent CDP message. The zero-length string indicates no Version field (TLV) was reported in the most recent CDP message." ::= { cdpCacheEntry 5 } cdpCacheDeviceId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Device-ID string as reported in the most recent CDP message. The zero-length string indicates no Device-ID field (TLV) was reported in the most recent CDP message." ::= { cdpCacheEntry 6 } cdpCacheDevicePort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Port-ID string as reported in the most recent CDP message. This will typically be the value of the ifName object (e.g., 'Ethernet0'). The zero-length string indicates no Port-ID field (TLV) was reported in the most recent CDP message." ::= { cdpCacheEntry 7 } cdpCachePlatform OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Device's Hardware Platform as reported in the most recent CDP message. The zero-length string indicates that no Platform field (TLV) was reported in the most recent CDP message." ::= { cdpCacheEntry 8 } cdpCacheCapabilities OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Device's Functional Capabilities as reported in the most recent CDP message. For latest set of specific values, see the latest version of the CDP specification. The zero-length string indicates no Capabilities field (TLV) was reported in the most recent CDP message." REFERENCE "Cisco Discovery Protocol Specification, 10/19/94." ::= { cdpCacheEntry 9 } cdpCacheVTPMgmtDomain OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The VTP Management Domain for the remote device's interface, as reported in the most recently received CDP message. This object is not instantiated if no VTP Management Domain field (TLV) was reported in the most recently received CDP message." REFERENCE "managementDomainName in CISCO-VTP-MIB" ::= { cdpCacheEntry 10 } cdpCacheNativeVLAN OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The remote device's interface's native VLAN, as reported in the most recent CDP message. The value 0 indicates no native VLAN field (TLV) was reported in the most recent CDP message." ::= { cdpCacheEntry 11 } cdpCacheDuplex OBJECT-TYPE SYNTAX INTEGER { unknown(1), halfduplex(2), fullduplex(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The remote device's interface's duplex mode, as reported in the most recent CDP message. The value unknown(1) indicates no duplex mode field (TLV) was reported in the most recent CDP message." ::= { cdpCacheEntry 12 } cdpCacheApplianceID OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The remote device's Appliance ID, as reported in the most recent CDP message. This object is not instantiated if no Appliance VLAN-ID field (TLV) was reported in the most recently received CDP message." ::= { cdpCacheEntry 13 } cdpCacheVlanID OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The remote device's VoIP VLAN ID, as reported in the most recent CDP message. This object is not instantiated if no Appliance VLAN-ID field (TLV) was reported in the most recently received CDP message." ::= { cdpCacheEntry 14 } cdpCachePowerConsumption OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliwatts" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of power consumed by remote device, as reported in the most recent CDP message. This object is not instantiated if no Power Consumption field (TLV) was reported in the most recently received CDP message." ::= { cdpCacheEntry 15 } cdpCacheMTU OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the size of the largest datagram that can be sent/received by remote device, as reported in the most recent CDP message. This object is not instantiated if no MTU field (TLV) was reported in the most recently received CDP message." ::= { cdpCacheEntry 16 } cdpCacheSysName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the value of the remote device's sysName MIB object. By convention, it is the device's fully qualified domain name. This object is not instantiated if no sysName field (TLV) was reported in the most recently received CDP message." ::= { cdpCacheEntry 17 } cdpCacheSysObjectID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the value of the remote device's sysObjectID MIB object. This object is not instantiated if no sysObjectID field (TLV) was reported in the most recently received CDP message." ::= { cdpCacheEntry 18 } cdpCachePrimaryMgmtAddrType OBJECT-TYPE SYNTAX CiscoNetworkProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of the type of address contained in the corresponding instance of cdpCachePrimaryMgmtAddress." ::= { cdpCacheEntry 19 } cdpCachePrimaryMgmtAddr OBJECT-TYPE SYNTAX CiscoNetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the (first) network layer address at which the device will accept SNMP messages as reported in the most recently received CDP message. If the corresponding instance of cdpCachePrimaryMgmtAddrType has the value 'ip(1)', then this object would be an IP-address. If the remote device is not currently manageable via any network protocol, this object has the special value of the IPv4 address 0.0.0.0. If the most recently received CDP message did not contain any primary address at which the device prefers to receive SNMP messages, then this object is not instanstiated." ::= { cdpCacheEntry 20 } cdpCacheSecondaryMgmtAddrType OBJECT-TYPE SYNTAX CiscoNetworkProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of the type of address contained in the corresponding instance of cdpCacheSecondaryMgmtAddress." ::= { cdpCacheEntry 21 } cdpCacheSecondaryMgmtAddr OBJECT-TYPE SYNTAX CiscoNetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the alternate network layer address (other than the one indicated by cdpCachePrimaryMgmtAddr) at which the device will accept SNMP messages as reported in the most recently received CDP message. If the corresponding instance of cdpCacheSecondaryMgmtAddrType has the value 'ip(1)', then this object would be an IP-address. If the most recently received CDP message did not contain such an alternate network layer address, then this object is not instanstiated." ::= { cdpCacheEntry 22 } cdpCachePhysLocation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the physical location, as reported by the most recent CDP message, of a connector which is on, or physically connected to, the remote device's interface over which the CDP packet is sent. This object is not instantiated if no Physical Location field (TLV) was reported by the most recently received CDP message." ::= { cdpCacheEntry 23 } cdpCacheLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time when this cache entry was last changed. This object is initialised to the current time when the entry gets created and updated to the current time whenever the value of any (other) object instance in the corresponding row is modified." ::= { cdpCacheEntry 24 } -- -- The CDP Global Group -- cdpGlobalRun OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of whether the Cisco Discovery Protocol is currently running. Entries in cdpCacheTable are deleted when CDP is disabled." DEFVAL { true } ::= { cdpGlobal 1 } cdpGlobalMessageInterval OBJECT-TYPE SYNTAX INTEGER (5..254) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval at which CDP messages are to be generated. The default value is 60 seconds." DEFVAL { 60 } ::= { cdpGlobal 2 } cdpGlobalHoldTime OBJECT-TYPE SYNTAX INTEGER (10..255) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The time for the receiving device holds CDP message. The default value is 180 seconds." DEFVAL { 180 } ::= { cdpGlobal 3 } cdpGlobalDeviceId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The device ID advertised by this device. The format of this device id is characterized by the value of cdpGlobalDeviceIdFormat object." ::= { cdpGlobal 4 } cdpGlobalLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time when the cache table was last changed. It is the most recent time at which any row was last created, modified or deleted." ::= { cdpGlobal 5 } cdpGlobalDeviceIdFormatCpb OBJECT-TYPE SYNTAX BITS { serialNumber(0), macAddress(1), other (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the Device-Id format capability of the device. serialNumber(0) indicates that the device supports using serial number as the format for its DeviceId. macAddress(1) indicates that the device supports using layer 2 MAC address as the format for its DeviceId. other(2) indicates that the device supports using its platform specific format as the format for its DeviceId." ::= { cdpGlobal 6 } cdpGlobalDeviceIdFormat OBJECT-TYPE SYNTAX INTEGER { serialNumber(1), macAddress(2), other(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of the format of Device-Id contained in the corresponding instance of cdpGlobalDeviceId. User can only specify the formats that the device is capable of as denoted in cdpGlobalDeviceIdFormatCpb object. serialNumber(1) indicates that the value of cdpGlobalDeviceId object is in the form of an ASCII string contain the device serial number. macAddress(2) indicates that the value of cdpGlobalDeviceId object is in the form of Layer 2 MAC address. other(3) indicates that the value of cdpGlobalDeviceId object is in the form of a platform specific ASCII string contain info that identifies the device. For example: ASCII string contains serialNumber appended/prepened with system name." ::= { cdpGlobal 7 } -- conformance information ciscoCdpMIBConformance OBJECT IDENTIFIER ::= { ciscoCdpMIB 2 } ciscoCdpMIBCompliances OBJECT IDENTIFIER ::= { ciscoCdpMIBConformance 1 } ciscoCdpMIBGroups OBJECT IDENTIFIER ::= { ciscoCdpMIBConformance 2 } -- compliance statements ciscoCdpMIBCompliance MODULE-COMPLIANCE STATUS obsolete -- superseded by ciscoCdpMIBComplianceV11R01 DESCRIPTION "The compliance statement for the CDP MIB." MODULE -- this module MANDATORY-GROUPS { ciscoCdpMIBGroup } ::= { ciscoCdpMIBCompliances 1 } ciscoCdpMIBComplianceV11R01 MODULE-COMPLIANCE STATUS obsolete -- superseded by ciscoCdpMIBComplianceV11R02 DESCRIPTION "The compliance statement for the CDP MIB." MODULE -- this module MANDATORY-GROUPS { ciscoCdpMIBGroupV11R01 } ::= { ciscoCdpMIBCompliances 2 } ciscoCdpMIBComplianceV11R02 MODULE-COMPLIANCE STATUS obsolete -- superseded by ciscoCdpMIBComplianceV12R02 DESCRIPTION "The compliance statement for the CDP MIB." MODULE -- this module MANDATORY-GROUPS { ciscoCdpMIBGroupV11R02 } ::= { ciscoCdpMIBCompliances 3 } ciscoCdpMIBComplianceV12R02 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the CDP MIB." MODULE -- this module MANDATORY-GROUPS { ciscoCdpMIBGroupV12R02 } ::= { ciscoCdpMIBCompliances 4 } -- units of conformance ciscoCdpMIBGroup OBJECT-GROUP OBJECTS { cdpInterfaceEnable, cdpInterfaceMessageInterval, cdpCacheAddressType, cdpCacheAddress, cdpCacheVersion, cdpCacheDeviceId, cdpCacheDevicePort, cdpCacheCapabilities, cdpCachePlatform } STATUS obsolete -- superseded by ciscoCdpMIBGroupV11R01 DESCRIPTION "A collection of objects for use with the Cisco Discovery Protocol." ::= { ciscoCdpMIBGroups 1 } ciscoCdpMIBGroupV11R01 OBJECT-GROUP OBJECTS { cdpInterfaceEnable, cdpInterfaceMessageInterval, cdpInterfaceGroup, cdpInterfacePort, cdpCacheAddressType, cdpCacheAddress, cdpCacheVersion, cdpCacheDeviceId, cdpCacheDevicePort, cdpCacheCapabilities, cdpCachePlatform } STATUS obsolete -- superseded by ciscoCdpMIBGroupV11R02 DESCRIPTION "A collection of objects for use with the Cisco Discovery Protocol." ::= { ciscoCdpMIBGroups 2 } ciscoCdpMIBGroupV11R02 OBJECT-GROUP OBJECTS { cdpInterfaceEnable, cdpInterfaceGroup, cdpInterfacePort, cdpCacheAddressType, cdpCacheAddress, cdpCacheVersion, cdpCacheDeviceId, cdpCacheDevicePort, cdpCacheCapabilities, cdpCachePlatform, cdpGlobalRun, cdpGlobalMessageInterval, cdpGlobalHoldTime } STATUS obsolete -- superseded by ciscoCdpMIBGroupV12R02 DESCRIPTION "A collection of objects for use with the Cisco Discovery Protocol." ::= { ciscoCdpMIBGroups 3 } ciscoCdpMIBGroupV12R02 OBJECT-GROUP OBJECTS { cdpInterfaceEnable, cdpInterfaceGroup, cdpInterfacePort, cdpCacheAddressType, cdpCacheAddress, cdpCacheVersion, cdpCacheDeviceId, cdpCacheDevicePort, cdpCacheCapabilities, cdpCachePlatform, cdpCacheVTPMgmtDomain, cdpCacheNativeVLAN, cdpCacheDuplex, cdpGlobalRun, cdpGlobalMessageInterval, cdpGlobalHoldTime, cdpGlobalDeviceId } STATUS current DESCRIPTION "A collection of objects for use with the Cisco Discovery Protocol." ::= { ciscoCdpMIBGroups 5 } ciscoCdpV2MIBGroup OBJECT-GROUP OBJECTS { cdpCacheApplianceID, cdpCacheVlanID, cdpCachePowerConsumption, cdpCacheMTU, cdpCacheSysName, cdpCacheSysObjectID, cdpCacheLastChange, cdpCachePhysLocation, cdpCachePrimaryMgmtAddrType, cdpCachePrimaryMgmtAddr, cdpCacheSecondaryMgmtAddrType, cdpCacheSecondaryMgmtAddr, cdpGlobalLastChange, cdpGlobalDeviceIdFormatCpb, cdpGlobalDeviceIdFormat } STATUS current DESCRIPTION "A collection of objects for use with the Cisco Discovery Protocol version 2." ::= { ciscoCdpMIBGroups 6 } ciscoCdpV2IfExtGroup OBJECT-GROUP OBJECTS { cdpInterfaceExtendedTrust, cdpInterfaceCosForUntrustedPort } STATUS current DESCRIPTION "A collection of objects for use with the Cisco Discovery Protocol version 2 to configure the value for Extended Trust TLV and COS for Untrusted Port TLV." ::= { ciscoCdpMIBGroups 7 } END