-- SWL2MGMT MIB Ver 0.02 2002/07/30 -- -- -- Add swL2TrafficMgmt -- Modified swL2DevCtrl -- Removed swL2PortStTable -- Removed swL2PortCtrlEntry->swL2PortCtrlBackPressState and -- swL2PortCtrlBMStormthreshold -- Modified swL2MirrorMgmt -- Removed swL2FilterAddrVid -- Modified swL2IGMPCtrlTable -- Removed swL2PriorityMgmt -- Modified swL2TrunkMasterPortIndex MAX-ACCESS read-only to read-write -- Add swL2IGMPCtrState for invalid(4) -- Modified swL2PortInfoType -- Removed swDevInfoFrontPanelLedStatus about RPS and modified its SIZE -- By Tommy Wang -- -- -- SWL2MGMT MIB Ver 0.01 2000/07/03 -- -- -- Removed swL2PortTxPrioQueueCtrlTable -- Modified swL2PortCtrlBMStormPercentage to swL2PortCtrlBMStormthreshold -- By Chrissy Chen SWL2MGMT-MIB DEFINITIONS ::= BEGIN IMPORTS Counter32,Counter64,TimeTicks,NOTIFICATION-TYPE, MODULE-IDENTITY,OBJECT-TYPE,IpAddress, Unsigned32, Gauge32 FROM SNMPv2-SMI MacAddress, RowStatus, TruthValue FROM SNMPv2-TC privateMgmt FROM SWPRIMGMT-MIB DisplayString FROM RFC1213-MIB TRAP-TYPE FROM RFC-1215; swL2MgmtMIB MODULE-IDENTITY LAST-UPDATED "0007150000Z" ORGANIZATION "enterprise, Inc." CONTACT-INFO " Customer Service Postal: Tel: E-mail: " DESCRIPTION "The Structure of Layer 2 Network Management Information for the proprietary enterprise." ::= { privateMgmt 2 } PortList ::= OCTET STRING(SIZE (0..127)) VlanIndex ::= Unsigned32 swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 } swL2UnitMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 } swL2ModuleMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 } swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 } -- swL2FdbMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 } swL2FilterMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 } swL2VlanMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 } swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 } swL2MirrorMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 } swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 } -- swL2PriorityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 } swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 12 } swL2QosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 13 } swL2MgmtMIBTraps OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 } swL2StormCtrlMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 15 } swL2ACLQosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 16 } swL2MgmtPortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 } -- ******************************************************************** -- swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 } -- ******************************************************************** swL2DevInfo OBJECT IDENTIFIER ::= { swL2DevMgmt 1 } swDevInfoSystemUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re-initialization, then this object contains a zero value. This value is in units of seconds." ::= { swL2DevInfo 1 } swDevInfoTotalNumOfPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports within this switch. This value is the sum of the ports within this switch." ::= { swL2DevInfo 2 } swDevInfoNumOfPortInUse OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports in this switch connected to the segment or the end stations." ::= { swL2DevInfo 3 } swDevInfoConsoleInUse OBJECT-TYPE SYNTAX INTEGER { other(1), in-use(2), not-in-use(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This usage indication of console system." ::= { swL2DevInfo 4 } swDevInfoFrontPanelLedStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..324)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is a set of system LED indications. The first three octets is defined as system LED. The first LED is primary power LED. The second LED is redundant power LED. The third LED is console LED. The other octets following the second octets are the logical port LED (following dot1dBasePort ordering). Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED. The second byte is presented to the Speed LED. Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks. The second significant bit is used for link status: 1 = link fail. 2 = link pass. Speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. The four remaining bits are currently unused and must be 0." ::= { swL2DevInfo 5 } swL2DevCtrlUpDownloadState OBJECT-TYPE SYNTAX INTEGER { other(1), in-process(2), invalid-file(3), violation(4), file-not-found(5), disk-full(6), complete(7), time-out(8), tftp-establish-fail(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "status of upload/download control. If the value is 'other', means never firmware updated since device started up." ::= { swL2DevInfo 6 } swDevInfoSaveCfg OBJECT-TYPE SYNTAX INTEGER { other(1), proceeding(2), ready(3), failed(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the status of the device configuration. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. proceeding(2) - the device configuration is saving into the NV-RAM. ready(3) ¡V the device configuration has been ready to save into NV-RAM. failed(4) - The processing of saving device configuration is failed." ::= { swL2DevInfo 7 } -- *************************************************** swL2DevCtrl OBJECT IDENTIFIER ::= { swL2DevMgmt 2 } swL2DevCtrlStpState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object can be enabled or disabled spanning tree algorithm during runtime of the system." ::= { swL2DevCtrl 1 } swL2DevCtrlIGMPSnooping OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled." ::= { swL2DevCtrl 2 } swL2DevCtrlRmonState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object can be enabled or disabled RMON." ::= { swL2DevCtrl 3 } -- swL2DevCtrlBcastStormCtrl OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates broadcast storm control function is -- enabled or disabled. The swL2PortCtrlBMStormPercentage object -- will descript the detail about the storm control." -- ::= { swL2DevCtrl 3 } -- swL2DevCtrlMcastStormCtrl OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates multicast storm control function is -- enabled or disabled. The swL2PortCtrlBMStormPercentage object -- will descript the detail about the storm control." -- ::= { swL2DevCtrl 4 } -- swL2DevCtrlProtoCapability OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- layer2-default(2), -- layer2-ieee8021q(3), -- layer3-ip-ipx-default-routing(4), -- layer3-ip-ipx-ieee8021q-routing(5), -- layer3-ip-ipx-switching(6) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object control which protocol capability will be enable -- (or disable) when the switch hub restart at the startup (power -- on) or warm start. To change the value will immediately restart -- the device." -- ::= { swL2DevCtrl 3 } -- Multiple define with agent mib in mgmt.mib swL2DevCtrlUpDownloadImageFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the image file to be uploaded/Downloaded from the device to TFTP server when enabling image upload/download function (by writing swL2DevCtrlUpDownloadImage)." ::= { swL2DevCtrl 4 } swL2DevCtrlUpDownloadImageSourceAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ip address where been uploaded/Downloaded image file." ::= { swL2DevCtrl 5 } swL2DevCtrlUpDownloadImage OBJECT-TYPE SYNTAX INTEGER { other(1), upload(2), download(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Image file upload/download control. After setting, it will immediately invoke image upload/download function. While retrieving the value of this object, it always returns 'other' normally." ::= { swL2DevCtrl 6 } swL2DevCtrlSaveCfg OBJECT-TYPE SYNTAX INTEGER { normal(1), active(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "As the object is set to active, the current device configuration is save into to NV-RAM.If set to normal, do nothing." ::= { swL2DevCtrl 7 } swL2DevCtrlCleanAllStatisticCounter OBJECT-TYPE SYNTAX INTEGER { normal(1), active(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "As the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing." ::= { swL2DevCtrl 8 } swL2DevCtrlStpForwardBPDU OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object allow the forwarding of STP BPDU packets from other network device or not when STP is disabled on the device." ::= { swL2DevCtrl 9 } -- *************************************************** swL2DevAlarm OBJECT IDENTIFIER ::= { swL2DevMgmt 3 } swL2DevAlarmNewRoot OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "When the device has become the new root of the Spanning Tree, this object decide whether to send a new root trap." ::= { swL2DevAlarm 1 } swL2DevAlarmTopologyChange OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object determine to send a trap or not when the switch topology was changed. If the object is enabled(3), the topologyChange trap is sent by the device when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port tranition, the device doesn't send the trap if this object value is disabled or other." ::= { swL2DevAlarm 2 } swL2DevAlarmLinkChange OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object determine to send a trap or not when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its ports link change. The device doesn't send the trap if this object value is disabled or other." ::= { swL2DevAlarm 3 } -- ******************************************************************** -- swL2UnitMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 } -- ******************************************************************** swL2UnitCtrl OBJECT IDENTIFIER ::= { swL2UnitMgmt 1 } -- swL2UnitCtrlTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL2UnitCtrlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A table that contains control information about every unit." -- ::= { swL2UnitCtrl 1 } -- -- swL2UnitCtrlEntry OBJECT-TYPE -- SYNTAX SwL2UnitCtrlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of control information for each unit of the device." -- INDEX { swL2UnitCtrlUnitIndex } -- ::= { swL2UnitCtrlTable 1 } -- -- SwL2UnitCtrlEntry ::= -- SEQUENCE { -- swL2UnitCtrlUnitIndex -- INTEGER, -- swL2UnitCtrlSwFileName -- DisplayString, -- swL2UnitCtrlSwUpdateCtrl -- INTEGER -- } -- -- swL2UnitCtrlUnitIndex OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the unit number.(1..Max unit number)" -- ::= { swL2UnitCtrlEntry 1 } -- -- swL2UnitCtrlSwFileName OBJECT-TYPE -- SYNTAX DisplayString (SIZE (0..64)) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The name of the firmware file to be downloaded from the TFTP -- server to the unit when enabling image upload function (by -- writing swL2UnitCtrlSwUpdateCtrl object)." -- ::= { swL2UnitCtrlEntry 2 } -- -- swL2UnitCtrlSwUpdateCtrl OBJECT-TYPE -- SYNTAX INTEGER { -- normal(1), -- active(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Image file download control. As the object is set to active, -- it will immediately invoke firmware download function, and -- if set to normal, do nothing." -- ::= { swL2UnitCtrlEntry 3 } -- ******************************************************************** -- swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 } -- ******************************************************************** swL2PortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about every port." ::= { swL2PortMgmt 1 } swL2PortInfoEntry OBJECT-TYPE SYNTAX SwL2PortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information for each port of the device." INDEX { swL2PortInfoPortIndex } ::= { swL2PortInfoTable 1 } SwL2PortInfoEntry ::= SEQUENCE { swL2PortInfoPortIndex INTEGER, swL2PortInfoUnitIndex INTEGER, swL2PortInfoType INTEGER, swL2PortInfoLinkStatus INTEGER, swL2PortInfoNwayStatus INTEGER } swL2PortInfoPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortInfoEntry 1 } swL2PortInfoUnitIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates ID of the unit in the device" ::= { swL2PortInfoEntry 2 } swL2PortInfoType OBJECT-TYPE SYNTAX INTEGER { other(1), portType-100Base-TX(2), portType-100Base-FX(3), portType-100Base-FL(4), portType-1000Base-T(5), portType-1000Base-SX(6), portType-1000Base-LX(7), portType-1000Base-GBIC-SX(8), portType-1000Base-GBIC-LX(9), portType-1000Base-GBIC-CWDM(10), portType-1000Base-GBIC-XD(11), portType-1000Base-GBIC-ZX(12), portType-1000Base-GBIC-COPPER(13), portType-1000Base-GBIC-OTHER(14) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the connector type of this port." ::= { swL2PortInfoEntry 3 } swL2PortInfoLinkStatus OBJECT-TYPE SYNTAX INTEGER { other(1), link-pass(2), link-fail(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port link status." ::= { swL2PortInfoEntry 4 } swL2PortInfoNwayStatus OBJECT-TYPE SYNTAX INTEGER { other(1), auto(2), half-10Mbps(3), full-10Mbps(4), half-100Mbps(5), full-100Mbps(6), half-1Gigabps(7), full-1Gigabps(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port speed and duplex mode." ::= { swL2PortInfoEntry 5 } -- ******************************************************* swL2PortCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains control information about every port." ::= { swL2PortMgmt 2 } swL2PortCtrlEntry OBJECT-TYPE SYNTAX SwL2PortCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of control information for each port of the device." INDEX { swL2PortCtrlPortIndex } ::= { swL2PortCtrlTable 1 } SwL2PortCtrlEntry ::= SEQUENCE { swL2PortCtrlPortIndex INTEGER, swL2PortCtrlUnitIndex INTEGER, swL2PortCtrlAdminState INTEGER, swL2PortCtrlNwayState INTEGER, swL2PortCtrlFlowCtrlState INTEGER, -- swL2PortCtrlBackPressState -- INTEGER, -- swL2PortCtrlBMStormthreshold -- INTEGER, swL2PortCtrlAddressLearningState INTEGER } swL2PortCtrlPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortCtrlEntry 1 } swL2PortCtrlUnitIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates ID of the unit in the device" ::= { swL2PortCtrlEntry 2 } swL2PortCtrlAdminState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decide the port enabled or disabled." ::= { swL2PortCtrlEntry 3 } swL2PortCtrlNwayState OBJECT-TYPE SYNTAX INTEGER { other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6), nway-disabled-1Gigabps-Full(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Chose the port speed, duplex mode, and N-Way function mode." ::= { swL2PortCtrlEntry 4 } swL2PortCtrlFlowCtrlState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames." ::= { swL2PortCtrlEntry 5 } -- swL2PortCtrlBackPressState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Depending on this object determine to enable or disable the -- backpressure function when the port is working in half duplex -- mode." -- ::= { swL2PortCtrlEntry 7 } -- swL2PortCtrlBMStormthreshold OBJECT-TYPE -- SYNTAX INTEGER (0..255) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object to decide how much thousand packets per second -- broadcast/multicast (depend on swL2DevCtrlBcastStormCtrl or -- swL2DevCtrlMcastStormCtrl objects whether is enabled) will -- active storm control. Whenever a port reaches its configured -- amount of packets in the one second time interval, the device -- will start dropping that type of packet, until the time -- interval has expired. Once the time interval has expired, the -- device will start forwarding that type of packet." -- ::= { swL2PortCtrlEntry 8 } swL2PortCtrlAddressLearningState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decide the address learning state on this port is enabled or disabled." ::= { swL2PortCtrlEntry 6 } -- ******************************************************* swL2PortUtilTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortUtilEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information of utilization about every port." ::= { swL2PortMgmt 3 } swL2PortUtilEntry OBJECT-TYPE SYNTAX SwL2PortUtilEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information of utilization for each port of the device." INDEX { swL2PortUtilPortIndex } ::= { swL2PortUtilTable 1 } SwL2PortUtilEntry ::= SEQUENCE { swL2PortUtilPortIndex INTEGER, swL2PortUtilTxSec Gauge32, swL2PortUtilRxSec Gauge32, swL2PortUtilUtilization INTEGER } swL2PortUtilPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortUtilEntry 1 } swL2PortUtilTxSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates how many packets transmitted per second." ::= { swL2PortUtilEntry 2 } swL2PortUtilRxSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates how many packets received per second." ::= { swL2PortUtilEntry 3 } swL2PortUtilUtilization OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port utilization." ::= { swL2PortUtilEntry 4 } -- ****************************************************** -- swL2PortStTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL2PortStEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of port statistic Counter entries." -- ::= { swL2PortMgmt 3 } -- swL2PortStEntry OBJECT-TYPE -- SYNTAX SwL2PortStEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "This entry include all the port statistic Counter which -- support by the device, like Bytes received, Bytes Sent ..." -- INDEX { swL2PortStUnitIndex, swL2PortStModuleIndex, -- swL2PortStPortlndex } -- ::= { swL2PortStTable 1 } -- swL2PortStEntry ::= -- SEQUENCE { -- swL2PortStUnitIndex -- INTEGER, -- swL2PortStModuleIndex -- INTEGER, -- swL2PortStPortIndex -- INTEGER, -- swL2PortStRxBytes -- Counter32, -- swL2PortStRxPkts -- Counter32, -- swL2PortStRxCRCErrorPkts -- Counter32, -- swL2PortStRxVlanDetected -- Counter32, -- swL2PortStRxMcastPkts -- Counter32, -- swL2PortStRxBcastPkts -- Counter32, -- swL2PortStRxUndersizePkts -- Counter32, -- swL2PortStRxOversizePkts -- Counter32, -- swL2PortStRxFragmentsPkts -- Counter32, -- swL2PortStRxJabbersPkts -- Counter32, -- swL2PortStRx64OctsPkts -- Counter32, -- swL2PortStRx65To127OctsPkts -- Counter32, -- swL2PortStRx128To255OctsPkts -- Counter32, -- swL2PortStRx256To511OctsPkts -- Counter32, -- swL2PortStRx512To1023OctsPkts -- Counter32, -- swL2PortStRx1024To1518OctsPkts -- Counter32, -- swL2PortStTxBytes -- Counter32, -- swL2PortStTxTotalBytes -- Counter32, -- swL2PortStTxPkts -- Counter32, -- swL2PortStTxExDeferPkts -- Counter32, -- swL2PortStTxGiantPkts -- Counter32, -- swL2PortStTxUnderRunPkts -- Counter32, -- swL2PortStTxCRCErrorPkts -- Counter32, -- swL2PortStTxLenCheckErrorPkts -- Counter32, -- swL2PortStTxLenOutRangePkts -- Counter32, -- swL2PortStTxLateCollPkts -- Counter32, -- swL2PortStTxExCollPkts -- Counter32, -- swL2PortStTxSingleCollPkts -- Counter32, -- swL2PortStTxCollPkts -- Counter32, -- swL2PortStRxDropPkts -- Counter32, -- swL2PortStRxLocalDropPkts -- Counter32, -- swL2PortStHCRxBytes -- Counter64, -- swL2PortStHCRxPkts -- Counter64, -- swL2PortStHCTxBytes -- Counter64, -- swL2PortStHCTxPkts -- Counter64 -- } -- swL2PortStUnitIndex OBJECT-TYPE -- SYNTAX INTEGER (0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates ID of the unit in the device" -- ::= { swL2PortStEntry 1 } -- swL2PortStModuleIndex OBJECT-TYPE -- SYNTAX INTEGER (0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates ID of the module on the unit.(1..Max -- module number in the unit)" -- ::= { swL2PortStEntry 2 } -- swL2PortStPortlndex OBJECT-TYPE -- SYNTAX INTEGER (0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the module's port number.(1..Max port -- number in the module)" -- ::= { swL2PortStEntry 3 } -- swL2PortStRxBytes OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every data octet of good -- packets received." -- ::= { swL2PortStEntry 4 } -- swL2PortStRxPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every received good -- packet." -- ::= { swL2PortStEntry 5 } -- swL2PortStRxCRCErrorPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every received packet -- which has invalid CRC." -- ::= { swL2PortStEntry 6 } -- swL2PortStRxVlanDetected OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every received packet -- which has differ Vlan ID." -- ::= { swL2PortStEntry 7 } -- swL2PortStRxMcastPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every received packet -- which has multicast destination MAC address." -- ::= { swL2PortStEntry 8 } -- swL2PortStRxBcastPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every received packet -- which has broadcast destination MAC address (0xFFFFFFFFFFFF)." -- ::= { swL2PortStEntry 9 } -- swL2PortStRxUndersizePkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every received packet -- which meets any one the following conditions: -- 1.Receive byte count < 64 bytes and not CRC error. -- 2.Receive byte count < 68 bytes and tag packet and not CRC -- error." -- ::= { swL2PortStEntry 10 } -- swL2PortStRxOversizePkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every received packet -- which meets any one the following conditions: -- 1.Receive byte count >1518. -- 2.Receive byte count > 1522 and tag packet." -- ::= { swL2PortStEntry 11 } -- swL2PortStRxFragmentsPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every received packet -- which meets any one the following conditions: -- 1.Receive byte count < 64 bytes and CRC error. -- 2.Receive byte count < 68 bytes and tag packet and CRC error." -- ::= { swL2PortStEntry 12 } -- swL2PortStRxJabbersPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every received packet -- which meets any one the following conditions: -- 1.Receive byte count > 1518 and CRC error. -- 2.Receive byte count > 1522 bytes and tag packet and CRC -- error." -- ::= { swL2PortStEntry 13 } -- swL2PortStRx64OctsPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every received packet -- with size of 64 bytes." -- ::= { swL2PortStEntry 14 } -- swL2PortStRx65To127OctsPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every received packet -- with size of 65 to 127 bytes." -- ::= { swL2PortStEntry 15 } -- swL2PortStRx128To255OctsPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every received packet -- with size of 128 to 255 bytes." -- ::= { swL2PortStEntry 16 } -- swL2PortStRx256To511OctsPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every received packet -- with size of 256 to 511 bytes." -- ::= { swL2PortStEntry 17 } -- swL2PortStRx512To1023OctsPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every received packet -- with size of 512 to 1023 bytes." -- ::= { swL2PortStEntry 18 } -- swL2PortStRx1024To1518OctsPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every received packet -- with size of 1024 to 1536 bytes." -- ::= { swL2PortStEntry 19 } -- swL2PortStTxBytes OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every data octet of a -- transmitted good packet." -- ::= { swL2PortStEntry 20 } -- swL2PortStTxTotalBytes OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every data octet of a -- transmitted packet. This counter includes rejected transmitted -- packets." -- ::= { swL2PortStEntry 21 } -- swL2PortStTxPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every transmitted good -- packet." -- ::= { swL2PortStEntry 22 } -- swL2PortStTxExDeferPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every transmitted packet -- which excessive defer." -- ::= { swL2PortStEntry 23 } -- swL2PortStTxGiantPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every transmitted packet -- which transmit giant." -- ::= { swL2PortStEntry 24 } -- swL2PortStTxUnderRunPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every transmitted packet -- which transmit under run." -- ::= { swL2PortStEntry 25 } -- swL2PortStTxCRCErrorPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every transmitted packet -- which has invalid CRC." -- ::= { swL2PortStEntry 26 } -- swL2PortStTxLenCheckErrorPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every transmitted packet -- which has error length." -- ::= { swL2PortStEntry 27 } -- swL2PortStTxLenOutRangePkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every transmitted packet -- which has length out of range." -- ::= { swL2PortStEntry 28 } -- swL2PortStTxLateCollPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every transmitted packet -- which has transmit late collision." -- ::= { swL2PortStEntry 29 } -- swL2PortStTxExCollPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every transmitted packet -- which has transmit excessive collision." -- ::= { swL2PortStEntry 30 } -- swL2PortStTxSingleCollPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every transmitted packet -- which has transmit collision count = 1." -- ::= { swL2PortStEntry 31 } -- swL2PortStTxCollPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every transmitted packet -- which has transmit collision." -- ::= { swL2PortStEntry 32 } -- swL2PortStRxDropPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every received packet -- which has dropped for any reason." -- ::= { swL2PortStEntry 33 } -- swL2PortStRxLocalDropPkts OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This counter is incremented once for every received packet -- which local has dropped for any reason." -- ::= { swL2PortStEntry 34 } -- swL2PortStHCRxBytes OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This high capability (64 bit) counter is incremented once for -- every data octet of good packets received." -- ::= { swL2PortStEntry 35 } -- swL2PortStHCRxPkts OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This high capability (64 bit) counter is incremented once for -- every received good packet." -- ::= { swL2PortStEntry 36 } -- swL2PortStHCTxBytes OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This high capability (64 bit) counter is incremented once for -- every data octet of a transmitted good packet." -- ::= { swL2PortStEntry 37 } -- swL2PortStHCTxPkts OBJECT-TYPE -- SYNTAX Counter64 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This high capability (64 bit) counter is incremented once for -- every transmitted good packet." -- ::= { swL2PortStEntry 38 } -- ******************************************************************** -- swL2FdbMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 } -- ******************************************************************** -- -- swL2McastFdbStaticMaxSupportedEntries OBJECT-TYPE -- SYNTAX INTEGER (0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Maximum number of entries in the static multicast forwarding -- table (swL2McastFdbStaticTable) ." -- ::= { swL2FdbMgmt 1 } -- -- swL2McastFdbStaticCurrentTotalEntries OBJECT-TYPE -- SYNTAX INTEGER (0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Current exist number of entries in the static multicast -- forwarding table." -- ::= { swL2FdbMgmt 2 } -- -- swL2McastFdbStaticTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL2McastFdbStaticEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "This table defines for frames with specific multicast -- destination MAC address, the set of ports that the frame will -- be forwarded to. Note that the priority of FDB table entries -- is lower than Filtering Table, i.e. if there is a table hash -- collision between the entries of FDB Table and Filtering Table -- inside the switch H/W address table, then Filtering Table -- entry overwrite the colliding entry of FDB Table." -- ::= { swL2FdbMgmt 3 } -- -- swL2McastFdbStaticEntry OBJECT-TYPE -- SYNTAX SwL2McastFdbStaticEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of information specifies which ports the frames with -- specific multicast destination MAC address to go." -- INDEX { swL2McastFdbStaticAddress } -- ::= { swL2McastFdbStaticTable 1 } -- -- SwL2McastFdbStaticEntry ::= -- SEQUENCE { -- swL2McastFdbStaticAddress -- MacAddress, -- swL2McastFdbStaticPortMap -- PortList, -- swL2McastFdbStaticJoinIGMP -- INTEGER, -- swL2McastFdbStaticState -- INTEGER, -- swL2McastFdbStaticstatus -- INTEGER -- } -- -- swL2McastFdbStaticAddress OBJECT-TYPE -- SYNTAX MacAddress -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The destination MAC address in a frame to which this entry's -- forwarding information applies . This object only can take the -- value of the multicast address." -- ::= { swL2McastFdbStaticEntry 1 } -- -- swL2McastFdbStaticPortMap OBJECT-TYPE -- SYNTAX PortList -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The set of ports to which frames received from a specific -- port and destined for a specific MAC address, are allowed to -- be forwarded. Each octet within the value of this object -- specifies a set of eight ports, with the first octet -- specifying ports 1 through 8, the second octet specifying -- ports 9 through 16, etc. Within each octet, the most -- significant bit represents the lowest numbered port, and the -- least significant bit represents the highest numbered port. -- Thus, each port of the switch is represented by a single bit -- within the value of this object. If that bit has a value of -- '1' then that port is included in the set of ports; the port -- is not included if its bit has a value of '0'. (Note that the -- setting of the bit corresponding to the port from which a -- frame is received is irrelevant). The 4 octets is represent -- one unit port according its logic port. If the unit less 32 -- port , the other port don't care just fill zero." -- ::= { swL2McastFdbStaticEntry 2 } -- -- swL2McastFdbStaticJoinIGMP OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates whether to allow ports to join/leave -- IGMP group via IGMP Snooping. -- -- For a multicast address entry, port group could be classified -- into two catelogies : one is static and another is dynamic. In -- static port group, port members is defined statically by user, -- and dynamic port group allows a port member to join/leave the -- membership dynamically, according to IGMP report/leave -- messages. When this object is set to 'enabled', it allows -- dynamic port group updated for the multicast address entry as -- well as static port group. When it is set to 'disabled', -- dynamic port member join/leave is disabled, but static port -- group is not affected. -- -- This object is only vaild for multicast address indicated by -- swFdbStaticAddressIndex. -- -- other(1) - this entry is currently in use but the conditions -- under which it will remain so are different from each of -- the following values. -- disabled(2) - this entry doesn't allow dynamic updates via -- IGMP Snooping. This is a default setting. -- enabled(3) - this entry allow dynamic updates via IGMP -- Snooping." -- ::= { swL2McastFdbStaticEntry 3 } -- -- swL2McastFdbStaticState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- invalid(2), -- valid(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the status of this entry. -- -- other(1) - this entry is currently in use but the conditions -- under which it will remain so are different from each of -- the following values. -- invalid(2) - writing this value to the object, and then the -- corresponding entry will be removed from the table. -- valid(3) - this entry is reside in the table." -- ::= { swL2McastFdbStaticEntry 4 } -- -- swL2McastFdbStaticstatus OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- apply(2), -- not-apply(3) -- } -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the status of this entry . -- -- other(1) - this entry is currently in use but the conditions -- under which it will remain so are different from each of -- the following values. -- apply(2) - this entry is currently in use and reside in the -- table. -- not-apply(3) - this entry is reside in the table but currently -- not in use due to conflict with other table." -- ::= { swL2McastFdbStaticEntry 5 } -- -- ******************************************************************** -- swL2FilterMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 } -- ******************************************************************** swL2FilterAddrConfig OBJECT IDENTIFIER ::= { swL2FilterMgmt 1 } swL2FilterAddrMaxSupportedEntries OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries in the MAC address filtering table (swL2FilterAddrCtrlTable)." ::= { swL2FilterAddrConfig 1 } swL2FilterAddrCurrentTotalEntries OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Current applied number of entries in the MAC address filtering table." ::= { swL2FilterAddrConfig 2 } swL2FilterAddrCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2FilterAddrCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines information for the device to filter packets with specific MAC address (either as the DA and/or as the SA). The MAC address can be a unicast address or a multicast address. This table has higher priority than both static FDB table and IGMP table. It means that if a MAC address appears on this table also appears on the static FDB table, the device will use the information provide by this table to process the packet." ::= { swL2FilterAddrConfig 3 } swL2FilterAddrCtrlEntry OBJECT-TYPE SYNTAX SwL2FilterAddrCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about a specific unicast/multicast MAC address for which the switch has filtering information." INDEX { swL2FilterAddrMacIndex } ::= { swL2FilterAddrCtrlTable 1 } SwL2FilterAddrCtrlEntry ::= SEQUENCE { -- swL2FilterAddrVid -- VlanIndex, swL2FilterAddrMacIndex MacAddress, swL2FilterAddrState INTEGER } -- swL2FilterAddrVid OBJECT-TYPE -- SYNTAX VlanIndex -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the VLAN-ID. If VLAN is in disabled -- mode, the object indicates the default VLAN-ID (0)." -- ::= { swL2FilterAddrCtrlEntry 1 } swL2FilterAddrMacIndex OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates a unicast/multicast MAC address for which the switch has filtering information. But if the swL2FilterAddrState = src-addr then the object can not be a multicast MAC address." ::= { swL2FilterAddrCtrlEntry 1 } swL2FilterAddrState OBJECT-TYPE SYNTAX INTEGER { other(1), dst-addr(2), src-addr(3), dst-src-addr(4), invalid(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. dst-addr(2) - recieved frames's destination address are currently used to be filtered as it meets with the MAC address entry of the table. src-addr(3) - recieved frames's source address are currently used to be filtered as it meets with the MAC address entry of the table. dst-src-addr(4) - recieved frames's destination address or source address are currently used to be filtered as it meets with the MAC address entry of the table. invalid(5) - writing this value to the object, and then the corresponding entry will be removed from the table." ::= { swL2FilterAddrCtrlEntry 2 } -- ********************************************************************* -- swL2VlanMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 } -- ********************************************************************* swL2StaticVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2StaticVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing static configuration information for each VLAN configured into the device by (local or network) management." ::= { swL2VlanMgmt 1 } swL2StaticVlanEntry OBJECT-TYPE SYNTAX SwL2StaticVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Static information for a VLAN configured into the device by (local or network) management." INDEX { swL2StaticVlanIndex } ::= { swL2StaticVlanTable 1 } SwL2StaticVlanEntry ::= SEQUENCE { swL2StaticVlanIndex INTEGER, swL2StaticVlanName DisplayString, swL2StaticVlanType INTEGER, swL2StaticVlanProtocolId INTEGER, swL2StaticVlanIpSubnetAddr IpAddress, swL2StaticVlanIpSubnetMask IpAddress, swL2StaticVlanUserDefinedPid OCTET STRING, swL2StaticVlanEncap INTEGER, swL2StaticVlanUserPriority INTEGER, swL2StaticVlanEgressPorts PortList, swL2StaticVlanUntaggedPorts PortList, swL2StaticVlanStatus RowStatus, swL2StaticVlanIpSubnetArpClassId INTEGER } swL2StaticVlanIndex OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "A value that uniquely identifies the Virtual LAN associated with this entry." ::= { swL2StaticVlanEntry 1 } swL2StaticVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "An administratively-assigned name for this VLAN." ::= { swL2StaticVlanEntry 2 } swL2StaticVlanType OBJECT-TYPE SYNTAX INTEGER { byport(1), byIpSubnet(2), byProtocolId(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of VLAN, distinguished according to the policy used to define its port membership." ::= { swL2StaticVlanEntry 3 } swL2StaticVlanProtocolId OBJECT-TYPE SYNTAX INTEGER { none(0), ipEther2(1), rarpEther2(2), ipx802dot3(3), ipx802dot2(4), ipxSnap(5), ipxEther2(6), apltkEther2Snap(7), decEther2(8), decOtherEther2(9), sna802dot2(10), snaEther2(11), netBios(12), xnsEther2(13), vinesEther2(14), ipv6Ether2(15), userDefined(16), arpEther2(17) } MAX-ACCESS read-write STATUS current DESCRIPTION "The protocol identifier of this VLAN. This value is meaningful only if swL2StaticVlanType is equal to byProtocolId(3). For other VLAN types it should have the value none(0)." ::= { swL2StaticVlanEntry 4 } swL2StaticVlanIpSubnetAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP subnet address of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0." ::= { swL2StaticVlanEntry 5 } swL2StaticVlanIpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP subnet mask of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0." ::= { swL2StaticVlanEntry 6 } swL2StaticVlanUserDefinedPid OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..2)) MAX-ACCESS read-write STATUS current DESCRIPTION "When swL2StaticVlanProtocolId is set to userDefined(16) in a protocol-based VLAN, this field represents the 16-bit user defined protocol identifier. Otherwise, this object should be zero." ::= { swL2StaticVlanEntry 7 } swL2StaticVlanEncap OBJECT-TYPE SYNTAX INTEGER { all(1), ethernet2(2), llc(3), snap(4), un-used(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value is meaningful only if swL2StaticVlanProtocolId is set to userDefined(16). Otherwise, this object should be un-used(5). If If this set to ethernet2(2), the Detagged Frame uses Type-encapsulated 802.3 format. If this set to llc(3), the Detagged Frame contains both a DSAP and an SSAP address field in the positions. If this set to snap(4), the Detagged Frame is of the format specified by IEEE Std. 802.1H for the encoding of an IEEE 802.3 Type Field in an 802.2/SNAP header." ::= { swL2StaticVlanEntry 8 } swL2StaticVlanUserPriority OBJECT-TYPE SYNTAX INTEGER (0|4|6|7) MAX-ACCESS read-write STATUS current DESCRIPTION "User priority level. This value is meaningful only if swL2StaticVlanType is set to byIpSubnet(2) or byProtocolId(3)." ::= { swL2StaticVlanEntry 9 } swL2StaticVlanEgressPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The set of ports which are permanently assigned to the egress list for this VLAN by management. The default value of this object is a string of zeros of appropriate length." ::= { swL2StaticVlanEntry 10 } swL2StaticVlanUntaggedPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN is a string of appropriate length including all ports. There is no specified default for other VLANs." ::= { swL2StaticVlanEntry 11 } swL2StaticVlanStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL2StaticVlanEntry 12 } swL2StaticVlanIpSubnetArpClassId OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the ARP classification ID. If the swL2StaticVlanType is not byIpSubnet(2), this value must be 0. If the swL2StaticVlanType is byIpSubnet(2), the range of this object is 1 to 4094. This object is useful when create the first IpSubnet entry, and not allow to modify." ::= { swL2StaticVlanEntry 13 } -- ------------------------------------------------------------- -- The VLAN Port Configuration Table -- ------------------------------------------------------------- swL2VlanPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2VlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing per port control and status information for VLAN configuration in the device." ::= { swL2VlanMgmt 2 } swL2VlanPortEntry OBJECT-TYPE SYNTAX SwL2VlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information controlling VLAN configuration for a port on the device." INDEX { swL2VlanPortIndex } ::= { swL2VlanPortTable 1 } SwL2VlanPortEntry ::= SEQUENCE { swL2VlanPortIndex INTEGER, swL2VlanPortPvid INTEGER, swL2VlanPortIngressChecking INTEGER } swL2VlanPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "An unique index used to identify a particular port in the system." ::= { swL2VlanPortEntry 1 } swL2VlanPortPvid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The PVID, the VLAN ID assigned to untagged frames or Priority- Tagged frames received on this port." ::= { swL2VlanPortEntry 2 } swL2VlanPortIngressChecking OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this is enabled(3) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When disabled(2), the port will accept all incoming frames." ::= { swL2VlanPortEntry 3 } -- ******************************************************************** -- swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 } -- ******************************************************************** swL2TrunkMaxSupportedEntries OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable)." ::= { swL2TrunkMgmt 1 } swL2TrunkCurrentNumEntries OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Current actived number of entries in the trunk configuration table." ::= { swL2TrunkMgmt 2 } swL2TrunkCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2TrunkCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifys which ports group a set of ports(up to 8) into a single logical link." ::= { swL2TrunkMgmt 3 } swL2TrunkCtrlEntry OBJECT-TYPE SYNTAX SwL2TrunkCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information specifies which ports group a set of ports(up to 8) into a single logical link." INDEX { swL2TrunkIndex } ::= { swL2TrunkCtrlTable 1 } SwL2TrunkCtrlEntry ::= SEQUENCE { swL2TrunkIndex INTEGER, swL2TrunkName DisplayString, swL2TrunkMasterPort INTEGER, swL2TrunkMember PortList, swL2TrunkFloodingPort INTEGER, swL2TrunkState INTEGER, swL2TrunkBPDU8600InterState INTEGER } swL2TrunkIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of logical port trunk. The trunk group number depend on the existence of unit and module." ::= { swL2TrunkCtrlEntry 1 } swL2TrunkName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of logical port trunk." ::= { swL2TrunkCtrlEntry 2 } swL2TrunkMasterPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The object indicates the master port number of the port trunk entry. When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on)." ::= { swL2TrunkCtrlEntry 3 } swL2TrunkMember OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate how many number of ports is included in this Trunk. The trunk port number depend on the existence of module. The maximum number of ports is 4 for one trunks." ::= { swL2TrunkCtrlEntry 4 } swL2TrunkFloodingPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the flooding port number of the port trunk entry. The first port of the trunk is implicitly configured to be the flooding port." ::= { swL2TrunkCtrlEntry 5 } swL2TrunkState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3), invalid(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - the port trunk disabled. enabled(3) - the port trunk enabled. invalid(4) - writing this value to the object, and then the corresponding entry will be removed from the table." ::= { swL2TrunkCtrlEntry 6 } swL2TrunkBPDU8600InterState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - the trunk member doesn't send BPDU. enabled(3) - the trunk member can send BPDU." ::= { swL2TrunkCtrlEntry 7 } swL2TrunkAlgorithm OBJECT-TYPE SYNTAX INTEGER { other(1), mac-source(2), mac-destination(3), mac-source-dest(4), ip-source(5), ip-destination(6), ip-source-dest(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures to part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data. This feature is only available using the address-based load-sharing algorithm." ::= { swL2TrunkMgmt 4 } -- ******************************************************************** -- swL2MirrorMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 } -- ******************************************************************** swL2MirrorLogicTargetPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates switch which port will sniff another port. A trunk port member cannot be configured as a target Snooping port. The port number is the sequential (logical) number which is also applied to bridge MIB, etc." ::= { swL2MirrorMgmt 1 } swL2MirrorPortSourceIngress OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The represent the ingress into the source port packet to sniffed." ::= { swL2MirrorMgmt 2 } swL2MirrorPortSourceEgress OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The represent the egress from the source port packet to sniffed." ::= { swL2MirrorMgmt 3 } swL2MirrorPortState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - writing this value to the object, and then the corresponding entry will be removed from the table. enabled(3) - this entry is reside in the table." ::= { swL2MirrorMgmt 4 } -- ******************************************************************** -- swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 } -- ******************************************************************** swL2IGMPMaxSupportedVlans OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of Vlans in the layer 2 IGMP control table (swL2IGMPCtrlTable)." ::= { swL2IGMPMgmt 1 } swL2IGMPMaxIpGroupNumPerVlan OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of multicast ip group per Vlan in the layer 2 IGMP information table (swL2IGMPQueryInfoTable)." ::= { swL2IGMPMgmt 2 } -- swL2IGMPLastQueryIPAddr OBJECT-TYPE -- SYNTAX IpAddress -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the ip address of last send IGMP query -- packet." -- ::= { swL2IGMPMgmt 3 } swL2IGMPCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2IGMPCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table controls the Vlan's IGMP function. Its scale depends on current VLAN state (swL2VlanInfoStatus). If VLAN is disabled mode, there is only one entry in the table, with index 1. If VLAN is in Port-Base or 802.1q mode, the number of entries can be up to 12, with index range from 1 to 12." ::= { swL2IGMPMgmt 3 } swL2IGMPCtrlEntry OBJECT-TYPE SYNTAX SwL2IGMPCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled." INDEX { swL2IGMPCtrlVid } ::= { swL2IGMPCtrlTable 1 } SwL2IGMPCtrlEntry ::= SEQUENCE { -- swL2IGMPCtrlIndex -- INTEGER, swL2IGMPCtrlVid INTEGER, swL2IGMPQueryInterval INTEGER, swL2IGMPMaxResponseTime INTEGER, swL2IGMPRobustness INTEGER, swL2IGMPLastMemberQueryInterval INTEGER, swL2IGMPHostTimeout INTEGER, swL2IGMPRouteTimeout INTEGER, swL2IGMPLeaveTimer INTEGER, swL2IGMPQueryState INTEGER, swL2IGMPCurrentState INTEGER, swL2IGMPCtrlState INTEGER } -- swL2IGMPCtrlIndex OBJECT-TYPE -- SYNTAX INTEGER (1..12) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the IGMP control entry number.Its scale -- depends on current VLAN state (swL2VlanInfoStatus). If VLAN is -- disabled, there is only one entry in the table, with index 1. -- If VLAN is in Port-Base or 802.1q mode, the number of entries -- is 12, with index range from 1 to 12." -- ::= { swL2IGMPCtrlEntry 1 } swL2IGMPCtrlVid OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the IGMP control entry's VLAN id. If VLAN is disabled, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode, the Vid setting can vary from 1 to 4094 by management user, and the Vid in each entry must be unique in the IGMP Control Table." ::= { swL2IGMPCtrlEntry 1 } swL2IGMPQueryInterval OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The frequency at which IGMP Host-Query packets are transmitted on this switch." DEFVAL { 125 } ::= { swL2IGMPCtrlEntry 2 } swL2IGMPMaxResponseTime OBJECT-TYPE SYNTAX INTEGER (1..25) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum query response time on this switch." DEFVAL { 10 } ::= { swL2IGMPCtrlEntry 3 } swL2IGMPRobustness OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses." DEFVAL { 2 } ::= { swL2IGMPCtrlEntry 4 } swL2IGMPLastMemberQueryInterval OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages." DEFVAL { 1 } ::= { swL2IGMPCtrlEntry 5 } swL2IGMPHostTimeout OBJECT-TYPE SYNTAX INTEGER (1..16711450) MAX-ACCESS read-write STATUS current DESCRIPTION "The timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer is expired. Please reference RFC2236-1997." DEFVAL { 260 } ::= { swL2IGMPCtrlEntry 6 } swL2IGMPRouteTimeout OBJECT-TYPE SYNTAX INTEGER (1..16711450) MAX-ACCESS read-write STATUS current DESCRIPTION "The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages." DEFVAL { 260 } ::= { swL2IGMPCtrlEntry 7 } swL2IGMPLeaveTimer OBJECT-TYPE SYNTAX INTEGER (1..16711450) MAX-ACCESS read-write STATUS current DESCRIPTION "When a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left." DEFVAL { 1 } ::= { swL2IGMPCtrlEntry 8 } swL2IGMPQueryState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decide the IGMP query enabled or disabled." ::= { swL2IGMPCtrlEntry 9 } swL2IGMPCurrentState OBJECT-TYPE SYNTAX INTEGER { other(1), querier(2), non-querier(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current IGMP query state." ::= { swL2IGMPCtrlEntry 10 } swL2IGMPCtrlState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - IGMP funtion is disabled for this entry. enabled(3) - IGMP funtion is enabled for this entry." ::= { swL2IGMPCtrlEntry 11 } swL2IGMPQueryInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2IGMPQueryInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains the number current IGMP query packets which is captured by this device, as well as the IGMP query packets sent by the device." ::= { swL2IGMPMgmt 4 } swL2IGMPQueryInfoEntry OBJECT-TYPE SYNTAX SwL2IGMPQueryInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN entry are all enabled." INDEX { swL2IGMPInfoVid } ::= { swL2IGMPQueryInfoTable 1 } SwL2IGMPQueryInfoEntry ::= SEQUENCE { -- swL2IGMPInfoIndex -- INTEGER, swL2IGMPInfoVid INTEGER, swL2IGMPInfoQueryCount INTEGER, swL2IGMPInfoTxQueryCount INTEGER } -- swL2IGMPInfoIndex OBJECT-TYPE -- SYNTAX INTEGER (1..12) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the IGMP query information entry -- number. It could be up to 12 entries, depending on current -- number of VLAN entries." -- ::= { swL2IGMPQueryInfoEntry 1 } swL2IGMPInfoVid OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Vid of associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable)." ::= { swL2IGMPQueryInfoEntry 1 } swL2IGMPInfoQueryCount OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis." ::= { swL2IGMPQueryInfoEntry 2 } swL2IGMPInfoTxQueryCount OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1." ::= { swL2IGMPQueryInfoEntry 3 } swL2IGMPGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2IGMPGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing current IGMP information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. See swL2FilterMgmt description also." ::= { swL2IGMPMgmt 5 } swL2IGMPGroupEntry OBJECT-TYPE SYNTAX SwL2IGMPGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about current IGMP information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled." INDEX { swL2IGMPVid , swL2IGMPGroupIpAddr } ::= { swL2IGMPGroupTable 1 } SwL2IGMPGroupEntry ::= SEQUENCE { swL2IGMPVid INTEGER, swL2IGMPGroupIpAddr IpAddress, swL2IGMPMacAddr MacAddress, swL2IGMPPortMap PortList, swL2IGMPIpGroupReportCount INTEGER } swL2IGMPVid OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network." ::= { swL2IGMPGroupEntry 1 } swL2IGMPGroupIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis." ::= { swL2IGMPGroupEntry 2 } swL2IGMPMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object is identify mac address which is corresponding to swL2IGMPGroupIpAddr, in per-Vlan basis." ::= { swL2IGMPGroupEntry 3 } swL2IGMPPortMap OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'(Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant). The 4 octets is represent one unit port according its logic port. If the unit less 32 port, the other port don't care just fill zero." ::= { swL2IGMPGroupEntry 4 } swL2IGMPIpGroupReportCount OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicate how much report packet was receive by our device corresponding with this entry from IGMP function enabled, in per-Vlan basis." ::= { swL2IGMPGroupEntry 5 } swL2IGMPForwardTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2IGMPForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing current IGMP forwarding information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. See swL2FilterMgmt description also." ::= { swL2IGMPMgmt 6 } swL2IGMPForwardEntry OBJECT-TYPE SYNTAX SwL2IGMPForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about current IGMP forwarding information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled." INDEX { swL2IGMPForwardVid , swL2IGMPForwardGroupIpAddr } ::= { swL2IGMPForwardTable 1 } SwL2IGMPForwardEntry ::= SEQUENCE { swL2IGMPForwardVid INTEGER, swL2IGMPForwardGroupIpAddr IpAddress, swL2IGMPForwardPortMap PortList } swL2IGMPForwardVid OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report forward information captured on network." ::= { swL2IGMPForwardEntry 1 } swL2IGMPForwardGroupIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis." ::= { swL2IGMPForwardEntry 2 } swL2IGMPForwardPortMap OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'(Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant). The 4 octets is represent one unit port according its logic port. If the unit less 32 port, the other port don't care just fill zero." ::= { swL2IGMPForwardEntry 3 } swL2IGMPRPTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2IGMPRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table allows you to designate a range of ports as being connected to multicast-enabled routers. This will ensure that all packets with such a router as its destination will reach the multicast-enabled router, regardless of protocol, etc." ::= { swL2IGMPMgmt 7 } swL2IGMPRPEntry OBJECT-TYPE SYNTAX SwL2IGMPRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of swL2IGMPRPTable." INDEX { swL2IGMPRPVid } ::= { swL2IGMPRPTable 1 } SwL2IGMPRPEntry ::= SEQUENCE { swL2IGMPRPVid INTEGER, swL2IGMPRPStaticRouterPort PortList, swL2IGMPRPDynamicRouterPort PortList } swL2IGMPRPVid OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Vid of the VLAN on which the router port resides." ::= { swL2IGMPRPEntry 1 } swL2IGMPRPStaticRouterPort OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies a range of ports which will be configured as router ports." ::= { swL2IGMPRPEntry 2 } swL2IGMPRPDynamicRouterPort OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "Displays router ports that have been dynamically configued." ::= { swL2IGMPRPEntry 3 } swL2IGMPMulticastRouterOnly OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - the switch forwards all mulitcast traffic to any IP router. enabled(3) - the switch will forward all multicast traffic to the multicast router, only." ::= { swL2IGMPMgmt 8 } swL2IGMPGroupPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2IGMPGroupPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describe the detail information of the member ports of the swL2IGMPGroupTable." ::= { swL2IGMPMgmt 9 } swL2IGMPGroupPortEntry OBJECT-TYPE SYNTAX SwL2IGMPGroupPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about member ports of current swL2IGMPGroupTable." INDEX { swL2IGMPVid, swL2IGMPGroupIpAddr, swL2IGMPPortMember } ::= { swL2IGMPGroupPortTable 1 } SwL2IGMPGroupPortEntry ::= SEQUENCE { swL2IGMPPortMember INTEGER, swL2IGMPPortAgingTime INTEGER } swL2IGMPPortMember OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates which ports are belong to the same multicast group, in per-Vlan basis, in swL2IGMPGroupTable." ::= { swL2IGMPGroupPortEntry 1 } swL2IGMPPortAgingTime OBJECT-TYPE SYNTAX INTEGER (1..16711450) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicate the aging out timer. This value is in units of seconds." ::= { swL2IGMPGroupPortEntry 2 } swL2IGMPMulticastFilter OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - the un-registered multicast traffic will be flooded. enabled(3) - the un-registered multicast traffic will be filtered." ::= { swL2IGMPMgmt 10 } -- ******************************************************************** -- swL2PriorityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 } -- ******************************************************************** -- -- swL2PriorityAddrConfig OBJECT IDENTIFIER ::= { swL2PriorityMgmt 1 } -- -- swL2PriorityAddrMaxSupportedEntries OBJECT-TYPE -- SYNTAX INTEGER (0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Maximum number of entries in the MAC address queuing priority -- control table (swL2PriorityAddrCtrlTable)." -- ::= { swL2PriorityAddrConfig 1 } -- -- swL2PriorityAddrCurrentTotalEntries OBJECT-TYPE -- SYNTAX INTEGER (0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Current applied number of entries in the MAC address priority -- control table." -- ::= { swL2PriorityAddrConfig 2 } -- -- swL2PriorityAddrCtrlTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL2PriorityAddrCtrlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "This table defines information for the device to decide -- queuing specific MAC address to a specific priority level -- queue. The MAC address can be a unicast/multicast address -- packet. The priority level is from 0 to 3, the priority level -- 3 have the highest priority weight." -- ::= { swL2PriorityAddrConfig 3 } -- -- swL2PriorityAddrCtrlEntry OBJECT-TYPE -- SYNTAX SwL2PriorityAddrCtrlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of information about a specific unicast/multicast MAC -- address must be transmited to a specific priority queue for -- which the switch has priority information." -- INDEX { swL2PriorityAddrVid , swL2PriorityAddrMac } -- ::= { swL2PriorityAddrCtrlTable 1 } -- -- SwL2PriorityAddrCtrlEntry ::= -- SEQUENCE { -- swL2PriorityAddrVid -- VlanIndex, -- swL2PriorityAddrMac -- MacAddress, -- swL2PriorityAddrL2PrioLevel -- INTEGER, -- swL2PriorityAddrState -- INTEGER -- } -- -- swL2PriorityAddrVid OBJECT-TYPE -- SYNTAX VlanIndex -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the VLAN-ID. If VLAN is in disabled -- mode, the object indicates the default VLAN-ID (0)." -- ::= { swL2PriorityAddrCtrlEntry 1 } -- -- swL2PriorityAddrMac OBJECT-TYPE -- SYNTAX MacAddress -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates a unicast/multicast MAC address for -- which the switch has priority information. But if the -- swL2PriorityAddrState = src-addr then the object can not be a -- multicast MAC address." -- ::= { swL2PriorityAddrCtrlEntry 2 } -- -- swL2PriorityAddrL2PrioLevel OBJECT-TYPE -- SYNTAX INTEGER (0..3) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the priority level. The priority level -- 3 has the highest priority weight. The object specify the MAC -- address should be queued which priority queue. The priority -- level will over the priority level in a 802.1D." -- ::= { swL2PriorityAddrCtrlEntry 3 } -- -- swL2PriorityAddrState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- dst-addr(2), -- src-addr(3), -- dst-src-addr(4), -- invalid(5) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the status of this entry. -- -- other(1) - this entry is currently in use but the conditions -- under which it will remain so are different from each of -- the following values. -- dst-addr(2) - specific frames's destination address are -- currently used to be the priority queue as it meets with -- the MAC address entry of the table. -- src-addr(3) - specific frames's source address are currently -- used to be corresponding priority queue as it meets with -- the MAC address entry of the table. -- dst-src-addr(4) - specific frames's destination address or -- source address are currently used to be corresponding -- priority queue as it meets with the MAC address entry of -- the table. -- invalid(5) - writing this value to the object, and then the -- corresponding entry will be removed from the table." -- ::= { swL2PriorityAddrCtrlEntry 4 } -- ******************************************************************** -- swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 12 } -- ******************************************************************** swL2TrafficCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2TrafficCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifys the storm traffic control configuration." ::= { swL2TrafficMgmt 1 } swL2TrafficCtrlEntry OBJECT-TYPE SYNTAX SwL2TrafficCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information specifies the storm traffic control configuration." INDEX { swL2TrafficCtrlGroupIndex } ::= { swL2TrafficCtrlTable 1 } SwL2TrafficCtrlEntry ::= SEQUENCE { swL2TrafficCtrlGroupIndex INTEGER, swL2TrafficCtrlUnitIndex INTEGER, swL2TrafficCtrlBMStormthreshold INTEGER, swL2TrafficCtrlBcastStormCtrl INTEGER, swL2TrafficCtrlMcastStormCtrl INTEGER, swL2TrafficCtrlDlfStormCtrl INTEGER } swL2TrafficCtrlGroupIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of logical port trunk. The trunk group number depend on the existence of unit and module." ::= { swL2TrafficCtrlEntry 1 } swL2TrafficCtrlUnitIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates ID of the unit in the device" ::= { swL2TrafficCtrlEntry 2 } swL2TrafficCtrlBMStormthreshold OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object to decide how much thousand packets per second broadcast/multicast (depend on swL2TrafficCtrlBcastStormCtrl, swL2TrafficCtrlMcastStormCtrl or swL2TrafficCtrlDlfStormCtrl objects whether is enabled) will active storm control. Whenever a port reaches its configured amount of packets in the one second time interval, the device will start dropping that type of packet, until the time interval has expired. Once the time interval has expired, the device will start forwarding that type of packet." ::= { swL2TrafficCtrlEntry 3 } swL2TrafficCtrlBcastStormCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates broadcast storm control function is enabled or disabled." ::= { swL2TrafficCtrlEntry 4 } swL2TrafficCtrlMcastStormCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates multicast storm control function is enabled or disabled." ::= { swL2TrafficCtrlEntry 5 } swL2TrafficCtrlDlfStormCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates destination lookup fail function is enabled or disabled." ::= { swL2TrafficCtrlEntry 6 } -- ******************************************************************** -- swL2QosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 13 } -- ******************************************************************** swL2QosSchedulingTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2QosSchedulingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The switch contains 4 hardware priority queues. Incoming packets must be mapped to one of these four queues. Each hardware queue will transmit all of the packets in its buffer before allowing the next lower priority queue to transmit its packets. When the lowest hardware priority queue has finished transmitting all of its packets, the highest hardware priority queue can again transmit any packets it may have received." ::= { swL2QosMgmt 1 } swL2QosSchedulingEntry OBJECT-TYPE SYNTAX SwL2QosSchedulingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information specifies the Qos output scheduling Table." INDEX { swL2QosSchedulingClassId } ::= { swL2QosSchedulingTable 1 } SwL2QosSchedulingEntry ::= SEQUENCE { swL2QosSchedulingClassId INTEGER, swL2QosSchedulingMaxPkts INTEGER, swL2QosSchedulingMaxLatency INTEGER } swL2QosSchedulingClassId OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies which of the four hardware priority queues. The four hardware priority queues are identified by number, from 0 to 3, with the 0 queue being the lowest priority." ::= { swL2QosSchedulingEntry 1 } swL2QosSchedulingMaxPkts OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximium number of packets the above specified hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets." ::= { swL2QosSchedulingEntry 2 } swL2QosSchedulingMaxLatency OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum amount of time the above specified hardware priority queue will be allowed to transmit packets before allowing the next lowest hardware priority queue to begin transmitting its packets. A value between 0 and 255 can be specified. With this value multiplied by 16 ms to arrive at the total allowed time for the queue to transmit packets." ::= { swL2QosSchedulingEntry 3 } swL2QosPriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2QosPriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table display the current priority settings on the switch." ::= { swL2QosMgmt 2 } swL2QosPriorityEntry OBJECT-TYPE SYNTAX SwL2QosPriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information display the current priority settings on the switch." INDEX { swL2QosPriorityType, swL2QosPriorityValue} ::= { swL2QosPriorityTable 1 } SwL2QosPriorityEntry ::= SEQUENCE { swL2QosPriorityType INTEGER, swL2QosPriorityValue OCTET STRING, swL2QosPriorityPriority INTEGER, swL2QosPriorityPriorityState INTEGER, swL2QosPriorityReplaceDscp INTEGER, swL2QosPriorityReplaceDscpState INTEGER, swL2QosPriorityReplacePriority INTEGER, swL2QosPriorityState INTEGER } swL2QosPriorityType OBJECT-TYPE SYNTAX INTEGER { other(1), type-dscp(2), type-8021p(3), type-tcp(4), type-udp(5), type-ip(6), type-mac(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "These parameters define what characteristics an incoming packet must meet. One or more of the above parameters must be defined." ::= { swL2QosPriorityEntry 1 } swL2QosPriorityValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1 | 2| 4| 6)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object must match with swL2QosPriorityType. If the type is type-dscp(2), the range of this object is 0~63. If the type is type-8021p(3), the range of this object is 0~7. If the type is type-tcp(4) or type-udp(5), the range of this object is 1~65535." ::= { swL2QosPriorityEntry 2 } swL2QosPriorityPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Allows to specify a priority value to be written to the 802.1p priority field of an incoming packet that meets the criteria." ::= { swL2QosPriorityEntry 3 } swL2QosPriorityPriorityState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates 802.1p priority function is enabled or disabled." ::= { swL2QosPriorityEntry 4 } swL2QosPriorityReplaceDscp OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Allows to specify a value to be written to the DSCP field of an incoming packet that meets the criteria." ::= { swL2QosPriorityEntry 5 } swL2QosPriorityReplaceDscpState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates DSCP function is enabled or disabled." ::= { swL2QosPriorityEntry 6 } swL2QosPriorityReplacePriority OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the 802.1p user priority with the priority specified above will be replaced or not." ::= { swL2QosPriorityEntry 7 } swL2QosPriorityState OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), valid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table." ::= { swL2QosPriorityEntry 8 } -- ******************************************************************** -- swL2MgmtMIBTraps OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 } -- ******************************************************************** managementPortLinkUp TRAP-TYPE ENTERPRISE swL2MgmtMIB DESCRIPTION "The trap is sent whenever the management port is link up." ::= 1 managementPortLinkDown TRAP-TYPE ENTERPRISE swL2MgmtMIB DESCRIPTION "The trap is sent whenever the management port is link down." ::= 2 -- ******************************************************************** -- swL2StormCtrlMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 15 } -- ******************************************************************** swL2StormCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2StormCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifys the storm traffic control configuration." ::= { swL2StormCtrlMgmt 1 } swL2StormCtrlEntry OBJECT-TYPE SYNTAX SwL2StormCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information specifies the storm traffic control configuration." INDEX { swL2StormCtrlPortIndex } ::= { swL2StormCtrlTable 1 } SwL2StormCtrlEntry ::= SEQUENCE { swL2StormCtrlPortIndex INTEGER, swL2StormCtrlBcastStormCtrl INTEGER, swL2StormCtrlMcastStormCtrl INTEGER, swL2StormCtrlBMStormThreshold INTEGER } swL2StormCtrlPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of logical port." ::= { swL2StormCtrlEntry 1 } swL2StormCtrlBcastStormCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates broadcast storm control function is enabled or disabled." ::= { swL2StormCtrlEntry 2 } swL2StormCtrlMcastStormCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates multicast storm control function is enabled or disabled." ::= { swL2StormCtrlEntry 3 } swL2StormCtrlBMStormThreshold OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "This object to decide how much percentage packets per second broadcast/multicast (depend on swL2StormCtrlBcastStormCtrl or swL2StormCtrlMcastStormCtrl objects whether is enabled) will active storm control. Whenever a port reaches its configured percent of packets in the one second time interval, the device will start dropping that type of packet, until the time interval has expired. Once the time interval has expired, the device will start forwarding that type of packet." ::= { swL2StormCtrlEntry 4 } swL2StormCtrlDlfState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates destination lookup fail function is enabled or disabled." ::= { swL2StormCtrlMgmt 2 } swL2StormCtrlDlfThreshold OBJECT-TYPE SYNTAX INTEGER (0..148810) MAX-ACCESS read-write STATUS current DESCRIPTION "This object to decide how much packets per second destination lookup fail (depend on swL2StormCtrlDlfState objects whether is enabled) will active storm control. Whenever the device reaches its configured packets in the one second time interval, the device will start dropping that type of packet, until the time interval has expired. Once the time interval has expired, the device will start forwarding that type of packet. This value must be the multiples of 8192." ::= { swL2StormCtrlMgmt 3 } swL2CpuRateLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2CpuRateLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifys the CPU rate limit per port. Once too much broadcast/multicast traffic, exceed CP-Limit, comes in from a port, the port state will be disabled." ::= { swL2StormCtrlMgmt 4 } swL2CpuRateLimitEntry OBJECT-TYPE SYNTAX SwL2CpuRateLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information specifies the CPU rate limit of the port configuration." INDEX { swL2CpuRateLimitPortIndex } ::= { swL2CpuRateLimitTable 1 } SwL2CpuRateLimitEntry ::= SEQUENCE { swL2CpuRateLimitPortIndex INTEGER, swL2CpuRateLimitState INTEGER, swL2CpuRateLimitBcastThreshold INTEGER, swL2CpuRateLimitMcastThreshold INTEGER } swL2CpuRateLimitPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of logical port." ::= { swL2CpuRateLimitEntry 1 } swL2CpuRateLimitState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates CPU rate limit function is enabled or disabled." ::= { swL2CpuRateLimitEntry 2 } swL2CpuRateLimitBcastThreshold OBJECT-TYPE SYNTAX INTEGER (0..1700) MAX-ACCESS read-write STATUS current DESCRIPTION "This object to decide how much packets per second broadcast will active traffic control. Whenever a port reaches its configured packets in the one second time interval, the port will be disabled." ::= { swL2CpuRateLimitEntry 3 } swL2CpuRateLimitMcastThreshold OBJECT-TYPE SYNTAX INTEGER (0..2000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object to decide how much packets per second multicast will active traffic control. Whenever a port reaches its configured packets in the one second time interval, the port will be disabled." ::= { swL2CpuRateLimitEntry 4 } swL2CpuUtilization OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The utilization of CPU." ::= { swL2StormCtrlMgmt 5 } -- ******************************************************************** -- swL2ACLQosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 16 } -- ******************************************************************** swL2ACLQosTemplate1Mode OBJECT-TYPE SYNTAX INTEGER { other(1), security(2), qos(3), l4-switch(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decide the operate mode of template_1." ::= { swL2ACLQosMgmt 1 } swL2ACLQosTemplate2Mode OBJECT-TYPE SYNTAX INTEGER { other(1), security(2), qos(3), l4-switch(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decide the operate mode of template_2." ::= { swL2ACLQosMgmt 2 } swL2ACLQosFlowClassifierTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2ACLQosFlowClassifierEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifys the template of flow classifier." ::= { swL2ACLQosMgmt 3 } swL2ACLQosFlowClassifierEntry OBJECT-TYPE SYNTAX SwL2ACLQosFlowClassifierEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information specifies the template of flow classifier." INDEX { swL2ACLQosFlowClassifierTemplateId } ::= { swL2ACLQosFlowClassifierTable 1 } SwL2ACLQosFlowClassifierEntry ::= SEQUENCE { swL2ACLQosFlowClassifierTemplateId INTEGER, swL2ACLQosFlowClassifierCurrentMode INTEGER, swL2ACLQosFlowClassifierSecuritySrcMask IpAddress, swL2ACLQosFlowClassifierQosFlavor INTEGER, swL2ACLQosFlowClassifierL4SwitchTCPDstIp INTEGER, swL2ACLQosFlowClassifierL4SwitchTCPSrcIp INTEGER, swL2ACLQosFlowClassifierL4SwitchTCPTos INTEGER, swL2ACLQosFlowClassifierL4SwitchTCPDstPort INTEGER, swL2ACLQosFlowClassifierL4SwitchTCPSrcPort INTEGER, swL2ACLQosFlowClassifierL4SwitchTCPFlags INTEGER, swL2ACLQosFlowClassifierL4SwitchUDPDstIp INTEGER, swL2ACLQosFlowClassifierL4SwitchUDPSrcIp INTEGER, swL2ACLQosFlowClassifierL4SwitchUDPTos INTEGER, swL2ACLQosFlowClassifierL4SwitchUDPDstPort INTEGER, swL2ACLQosFlowClassifierL4SwitchUDPSrcPort INTEGER, swL2ACLQosFlowClassifierL4SwitchOtherDstIp INTEGER, swL2ACLQosFlowClassifierL4SwitchOtherSrcIp INTEGER, swL2ACLQosFlowClassifierL4SwitchOtherTos INTEGER, swL2ACLQosFlowClassifierL4SwitchOtherL4Protocol INTEGER, swL2ACLQosFlowClassifierL4SwitchOtherICMPMessage INTEGER, swL2ACLQosFlowClassifierL4SwitchOtherIGMPType INTEGER, swL2ACLQosFlowClassifierActiveRuleNumber INTEGER, swL2ACLQosFlowClassifierSecurityDstMask IpAddress } swL2ACLQosFlowClassifierTemplateId OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of template ID." ::= { swL2ACLQosFlowClassifierEntry 1 } swL2ACLQosFlowClassifierCurrentMode OBJECT-TYPE SYNTAX INTEGER { other(1), security(2), qos(3), l4-switch(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operated mode of this template." ::= { swL2ACLQosFlowClassifierEntry 2 } swL2ACLQosFlowClassifierSecuritySrcMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates a source IP subnet rule for the switch. If the swL2ACLQosFlowClassifierCurrentMode is not security(2), then this object must be 0.0.0.0." ::= { swL2ACLQosFlowClassifierEntry 3 } swL2ACLQosFlowClassifierQosFlavor OBJECT-TYPE SYNTAX INTEGER { flavor-8021p(1), flavor-dscp(2), flavor-ip(3), flavor-tcp(4), flavor-udp(5), flavor-un-used(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "These parameters define what characteristics an incoming packet must meet. One or more of the above parameters must be defined. If the swL2ACLQosFlowClassifierCurrentMode is not qos(3), then this object must be flavor-un-used(6)." ::= { swL2ACLQosFlowClassifierEntry 4 } swL2ACLQosFlowClassifierL4SwitchTCPDstIp OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the destination ipaddress in the configured L4 TCP-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosFlowClassifierEntry 5 } swL2ACLQosFlowClassifierL4SwitchTCPSrcIp OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the source ipaddress in the configured L4 TCP-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosFlowClassifierEntry 6 } swL2ACLQosFlowClassifierL4SwitchTCPTos OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the type of service in the configured L4 TCP-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosFlowClassifierEntry 7 } swL2ACLQosFlowClassifierL4SwitchTCPDstPort OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the destination TCP port number in the configured L4 TCP-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosFlowClassifierEntry 8 } swL2ACLQosFlowClassifierL4SwitchTCPSrcPort OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the source TCP port number in the configured L4 TCP-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosFlowClassifierEntry 9 } swL2ACLQosFlowClassifierL4SwitchTCPFlags OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the TCP flags in the configured L4 TCP- session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosFlowClassifierEntry 10 } swL2ACLQosFlowClassifierL4SwitchUDPDstIp OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the destination ipaddress in the configured L4 UDP-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosFlowClassifierEntry 11 } swL2ACLQosFlowClassifierL4SwitchUDPSrcIp OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the source ipaddress in the configured L4 UDP-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosFlowClassifierEntry 12 } swL2ACLQosFlowClassifierL4SwitchUDPTos OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the type of service in the configured L4 UDP-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosFlowClassifierEntry 13 } swL2ACLQosFlowClassifierL4SwitchUDPDstPort OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the destination UDP port number in the configured L4 UDP session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosFlowClassifierEntry 14 } swL2ACLQosFlowClassifierL4SwitchUDPSrcPort OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the source UDP port number in the configured L4 UDP session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosFlowClassifierEntry 15 } swL2ACLQosFlowClassifierL4SwitchOtherDstIp OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the destination ipaddress in the configured L4 OTHER-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosFlowClassifierEntry 16 } swL2ACLQosFlowClassifierL4SwitchOtherSrcIp OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the source ipaddress in the configured L4 OTHER-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosFlowClassifierEntry 17 } swL2ACLQosFlowClassifierL4SwitchOtherTos OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the type of service in the configured L4 OTHER-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosFlowClassifierEntry 18 } swL2ACLQosFlowClassifierL4SwitchOtherL4Protocol OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the l4_protocol in the configured L4 OTHER-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosFlowClassifierEntry 19 } swL2ACLQosFlowClassifierL4SwitchOtherICMPMessage OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the ICMP message in the configured L4 OTHER-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosFlowClassifierEntry 20 } swL2ACLQosFlowClassifierL4SwitchOtherIGMPType OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the IGMP type in the configured L4 OTHER-session rule entries must be checked or not. If the swL2ACLQosFlowClassifierCurrentMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosFlowClassifierEntry 21 } swL2ACLQosFlowClassifierActiveRuleNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of active rule." ::= { swL2ACLQosFlowClassifierEntry 22 } swL2ACLQosFlowClassifierSecurityDstMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates a destination IP subnet rule for the switch. If the swL2ACLQosFlowClassifierCurrentMode is not security(2), then this object must be 0.0.0.0." ::= { swL2ACLQosFlowClassifierEntry 23 } swL2ACLQosFlowClassifierVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2ACLQosFlowClassifierVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifys which vlan has been binded in the template." ::= { swL2ACLQosMgmt 4 } swL2ACLQosFlowClassifierVlanEntry OBJECT-TYPE SYNTAX SwL2ACLQosFlowClassifierVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information which vlan has been binded in the template." INDEX { swL2ACLQosFlowClassifierVlanTemplateId, swL2ACLQosFlowClassifierVlanVlanName } ::= { swL2ACLQosFlowClassifierVlanTable 1 } SwL2ACLQosFlowClassifierVlanEntry ::= SEQUENCE { swL2ACLQosFlowClassifierVlanTemplateId INTEGER, swL2ACLQosFlowClassifierVlanVlanName DisplayString, swL2ACLQosFlowClassifierVlanState INTEGER } swL2ACLQosFlowClassifierVlanTemplateId OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of template ID." ::= { swL2ACLQosFlowClassifierVlanEntry 1 } swL2ACLQosFlowClassifierVlanVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The existence of VLAN name." ::= { swL2ACLQosFlowClassifierVlanEntry 2 } swL2ACLQosFlowClassifierVlanState OBJECT-TYPE SYNTAX INTEGER { other(1), attached(2), detached(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. attached(2) - this entry is reside in the table. detached(3) - writing this value to the object, and then the corresponding entry will be removed from the table." ::= { swL2ACLQosFlowClassifierVlanEntry 3 } swL2ACLQosTemplateRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2ACLQosTemplateRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifys the template-depend rules." ::= { swL2ACLQosMgmt 5 } swL2ACLQosTemplateRuleEntry OBJECT-TYPE SYNTAX SwL2ACLQosTemplateRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information specifies the template-depend rules." INDEX { swL2ACLQosTemplateRuleTemplateId, swL2ACLQosTemplateRuleIndex } ::= { swL2ACLQosTemplateRuleTable 1 } SwL2ACLQosTemplateRuleEntry ::= SEQUENCE { swL2ACLQosTemplateRuleTemplateId INTEGER, swL2ACLQosTemplateRuleIndex INTEGER, swL2ACLQosTemplateRuleMode INTEGER, swL2ACLQosTemplateRuleSecuritySrcIp IpAddress, swL2ACLQosTemplateRuleQosFlavor INTEGER, swL2ACLQosTemplateRuleQosValue OCTET STRING, swL2ACLQosTemplateRuleQosPriority INTEGER, swL2ACLQosTemplateRuleQosDscp INTEGER, swL2ACLQosTemplateRuleL4SwitchSessionType INTEGER, swL2ACLQosTemplateRuleL4SwitchSessionTCPDstIp IpAddress, swL2ACLQosTemplateRuleL4SwitchSessionTCPSrcIp IpAddress, swL2ACLQosTemplateRuleL4SwitchSessionTCPTos OCTET STRING, swL2ACLQosTemplateRuleL4SwitchSessionTCPDstPort INTEGER, swL2ACLQosTemplateRuleL4SwitchSessionTCPSrcPort INTEGER, swL2ACLQosTemplateRuleL4SwitchSessionTCPFlags INTEGER, swL2ACLQosTemplateRuleL4SwitchSessionUDPDstIp IpAddress, swL2ACLQosTemplateRuleL4SwitchSessionUDPSrcIp IpAddress, swL2ACLQosTemplateRuleL4SwitchSessionUDPTos OCTET STRING, swL2ACLQosTemplateRuleL4SwitchSessionUDPDstPort INTEGER, swL2ACLQosTemplateRuleL4SwitchSessionUDPSrcPort INTEGER, swL2ACLQosTemplateRuleL4SwitchSessionOtherDstIp IpAddress, swL2ACLQosTemplateRuleL4SwitchSessionOtherSrcIp IpAddress, swL2ACLQosTemplateRuleL4SwitchSessionOtherTos OCTET STRING, swL2ACLQosTemplateRuleL4SwitchSessionOtherL4Protocol INTEGER, swL2ACLQosTemplateRuleL4SwitchSessionOtherICMPType OCTET STRING, swL2ACLQosTemplateRuleL4SwitchSessionOtherICMPCode OCTET STRING, swL2ACLQosTemplateRuleL4SwitchSessionOtherIGMPType INTEGER, swL2ACLQosTemplateRuleL4SwitchActionType INTEGER, swL2ACLQosTemplateRuleL4SwitchActionForwardPriorityState INTEGER, swL2ACLQosTemplateRuleL4SwitchActionForwardPriority INTEGER, swL2ACLQosTemplateRuleL4SwitchActionForwardDscp INTEGER, swL2ACLQosTemplateRuleL4SwitchActionRedirectIp IpAddress, swL2ACLQosTemplateRuleL4SwitchActionRedirectDropUnreachable INTEGER, swL2ACLQosTemplateRuleState INTEGER, swL2ACLQosTemplateRuleL4SwitchSessionTCPFlagsAll BITS, swL2ACLQosTemplateRuleSecurityDstIp IpAddress } swL2ACLQosTemplateRuleTemplateId OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of template ID." ::= { swL2ACLQosTemplateRuleEntry 1 } swL2ACLQosTemplateRuleIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of template rule." ::= { swL2ACLQosTemplateRuleEntry 2 } swL2ACLQosTemplateRuleMode OBJECT-TYPE SYNTAX INTEGER { other(1), security(2), qos(3), l4-switch(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rule type of the entry." ::= { swL2ACLQosTemplateRuleEntry 3 } swL2ACLQosTemplateRuleSecuritySrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the source IP of flow template. If the swL2ACLQosTemplateRuleMode is not security(2), then this object will be display 0.0.0.0." ::= { swL2ACLQosTemplateRuleEntry 4 } swL2ACLQosTemplateRuleQosFlavor OBJECT-TYPE SYNTAX INTEGER { flavor-8021p(1), flavor-dscp(2), flavor-ip(3), flavor-tcp(4), flavor-udp(5), flavor-un-used(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rule type of the QOS mode. If the swL2ACLQosTemplateRuleMode is not qos(3), then this object must be flavor-un-used(6)." ::= { swL2ACLQosTemplateRuleEntry 5 } swL2ACLQosTemplateRuleQosValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0 |1 | 2| 4)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object must match with swL2ACLQosTemplateRuleQosFlavor. If the type is flavor-8021p(1), the range of this object is 0~7. If the type is flavor-dscp(2), the range of this object is 0~63. If the type is flavor-tcp(4) or flavor-udp(5), the range of this object is 1~65535. If the swL2ACLQosTemplateRuleMode is not qos(3), then this object must be NULL." ::= { swL2ACLQosTemplateRuleEntry 6 } swL2ACLQosTemplateRuleQosPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the priority of ingress packets in QOS mode. If the swL2ACLQosTemplateRuleMode is not qos(3), then this object must be 0." ::= { swL2ACLQosTemplateRuleEntry 7 } swL2ACLQosTemplateRuleQosDscp OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the Dscp of ingress packets in QOS mode. If the swL2ACLQosTemplateRuleMode is not qos(3), then this object must be 0." ::= { swL2ACLQosTemplateRuleEntry 8 } swL2ACLQosTemplateRuleL4SwitchSessionType OBJECT-TYPE SYNTAX INTEGER { tcp(1), udp(2), other(3), un-used(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the rule type of the TCP-Session in L4-Switch mode. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be un-used(4)." ::= { swL2ACLQosTemplateRuleEntry 9 } swL2ACLQosTemplateRuleL4SwitchSessionTCPDstIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the destination ipaddress in the configured L4 TCP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0.0.0.0." ::= { swL2ACLQosTemplateRuleEntry 10 } swL2ACLQosTemplateRuleL4SwitchSessionTCPSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the source ipaddress in the configured L4 TCP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0.0.0.0." ::= { swL2ACLQosTemplateRuleEntry 11 } swL2ACLQosTemplateRuleL4SwitchSessionTCPTos OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of service in the configured L4 TCP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be zero." ::= { swL2ACLQosTemplateRuleEntry 12 } swL2ACLQosTemplateRuleL4SwitchSessionTCPDstPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the destination TCP port number in the configured L4 TCP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0." ::= { swL2ACLQosTemplateRuleEntry 13 } swL2ACLQosTemplateRuleL4SwitchSessionTCPSrcPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the source TCP port number in the configured L4 TCP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0." ::= { swL2ACLQosTemplateRuleEntry 14 } swL2ACLQosTemplateRuleL4SwitchSessionTCPFlags OBJECT-TYPE SYNTAX INTEGER { fin(1), syn(2), rst(3), psh(4), ack(5), urg(6), un-used(7) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object indicates the TCP flags in the configured L4 TCP- session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be un-used(7). This object is deprecated because it just can let user to choose one of these items." ::= { swL2ACLQosTemplateRuleEntry 15 } swL2ACLQosTemplateRuleL4SwitchSessionUDPDstIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the destination ipaddress in the configured L4 UDP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0.0.0.0." ::= { swL2ACLQosTemplateRuleEntry 16 } swL2ACLQosTemplateRuleL4SwitchSessionUDPSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the soruce ipaddress in the configured L4 UDP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0.0.0.0." ::= { swL2ACLQosTemplateRuleEntry 17 } swL2ACLQosTemplateRuleL4SwitchSessionUDPTos OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of service in the configured L4 UDP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be zero." ::= { swL2ACLQosTemplateRuleEntry 18 } swL2ACLQosTemplateRuleL4SwitchSessionUDPDstPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the destination UDP port number in the configured L4 UDP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0." ::= { swL2ACLQosTemplateRuleEntry 19 } swL2ACLQosTemplateRuleL4SwitchSessionUDPSrcPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the source UDP port number in the configured L4 UDP-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0." ::= { swL2ACLQosTemplateRuleEntry 20 } swL2ACLQosTemplateRuleL4SwitchSessionOtherDstIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the destination ipaddress in the configured L4 OTHER-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0.0.0.0." ::= { swL2ACLQosTemplateRuleEntry 21 } swL2ACLQosTemplateRuleL4SwitchSessionOtherSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the source ipaddress in the configured L4 OTHER-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be 0.0.0.0." ::= { swL2ACLQosTemplateRuleEntry 22 } swL2ACLQosTemplateRuleL4SwitchSessionOtherTos OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of service in the configured L4 OTHER-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be zero." ::= { swL2ACLQosTemplateRuleEntry 23 } swL2ACLQosTemplateRuleL4SwitchSessionOtherL4Protocol OBJECT-TYPE SYNTAX INTEGER { icmp(1), igmp(2), un-used(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the l4_protocol in the configured L4 OTHER-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be un-used(3)." ::= { swL2ACLQosTemplateRuleEntry 24 } swL2ACLQosTemplateRuleL4SwitchSessionOtherICMPType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of ICMP message in the configured L4 OTHER-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be zero." ::= { swL2ACLQosTemplateRuleEntry 25 } swL2ACLQosTemplateRuleL4SwitchSessionOtherICMPCode OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the code of ICMP message in the configured L4 OTHER-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be zero." ::= { swL2ACLQosTemplateRuleEntry 26 } swL2ACLQosTemplateRuleL4SwitchSessionOtherIGMPType OBJECT-TYPE SYNTAX INTEGER { query(1), response-version-1(2), response-version-2(3), response-version-all(4), un-used(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the IGMP type in the configured L4 OTHER-session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be un-used(5). If the object be set to response-version-all(4), it means to create two entries with response-version-1(2) and response-version-2(3)." ::= { swL2ACLQosTemplateRuleEntry 27 } swL2ACLQosTemplateRuleL4SwitchActionType OBJECT-TYPE SYNTAX INTEGER { drop(1), forward(2), redirect(3), un-used(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the action when a packet matches an entry of l4_switch mode. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be un-used(4)." ::= { swL2ACLQosTemplateRuleEntry 28 } swL2ACLQosTemplateRuleL4SwitchActionForwardPriorityState OBJECT-TYPE SYNTAX INTEGER { other(1), true(2), false(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decide to sending the packet to one of 8 hardware priority queues or not." ::= { swL2ACLQosTemplateRuleEntry 29 } swL2ACLQosTemplateRuleL4SwitchActionForwardPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the priority related to one of 8 hardware priority queues. If the swL2ACLQosTemplateRuleMode is not l4-switch(4) or the swL2ACLQosTemplateRuleL4SwitchActionForwardPriorityState is not true(2), this object must be 0." ::= { swL2ACLQosTemplateRuleEntry 30 } swL2ACLQosTemplateRuleL4SwitchActionForwardDscp OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "If the swL2ACLQosTemplateRuleMode is not l4-switch(4) or the swL2ACLQosTemplateRuleL4SwitchActionForwardPriorityState is not true(2),, this object must be 0." ::= { swL2ACLQosTemplateRuleEntry 31 } swL2ACLQosTemplateRuleL4SwitchActionRedirectIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the redirected IP address that when a packet matches an entry of l4_switch mode. If the swL2ACLQosTemplateRuleL4SwitchActionType is not redirect(3), this object must be 0.0.0.0." ::= { swL2ACLQosTemplateRuleEntry 32 } swL2ACLQosTemplateRuleL4SwitchActionRedirectDropUnreachable OBJECT-TYPE SYNTAX INTEGER { other(1), true(2), false(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the action of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. false(2) - routing unreachable packet by using L2/IPv4 router forwarding table. true(3) - dropping unreachable packet" ::= { swL2ACLQosTemplateRuleEntry 33 } swL2ACLQosTemplateRuleState OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), valid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table." ::= { swL2ACLQosTemplateRuleEntry 34 } swL2ACLQosTemplateRuleL4SwitchSessionTCPFlagsAll OBJECT-TYPE SYNTAX BITS { fin(0), syn(1), rst(2), psh(3), ack(4), urg(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the TCP flags in the configured L4 TCP- session rule entries. If the swL2ACLQosTemplateRuleMode is not l4-switch(4), then this object must be zero." ::= { swL2ACLQosTemplateRuleEntry 35 } swL2ACLQosTemplateRuleSecurityDstIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the destination IP of flow template. If the swL2ACLQosTemplateRuleMode is not security(2), then this object will be display 0.0.0.0." ::= { swL2ACLQosTemplateRuleEntry 36 } swL2ACLQosDestinationIpFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2ACLQosDestinationIpFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines information for the device to filter packets with specific Destination IP address. The IP address can be a unicast address or multicast address. This table has higher priority than both static FDB table and IGMP table. It means that if a IP address appears on this table also appears on the static FDB table, the device will use the information provide by this table to process the packet." ::= { swL2ACLQosMgmt 6 } swL2ACLQosDestinationIpFilterEntry OBJECT-TYPE SYNTAX SwL2ACLQosDestinationIpFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about a specific unicast/multicast IP address for which the switch has filtering information." INDEX { swL2ACLQosDestinationIpFilterIpAddr } ::= { swL2ACLQosDestinationIpFilterTable 1 } SwL2ACLQosDestinationIpFilterEntry ::= SEQUENCE { swL2ACLQosDestinationIpFilterIndex INTEGER, swL2ACLQosDestinationIpFilterIpAddr IpAddress, swL2ACLQosDestinationIpFilterState INTEGER } swL2ACLQosDestinationIpFilterIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The index of this rule." ::= { swL2ACLQosDestinationIpFilterEntry 1 } swL2ACLQosDestinationIpFilterIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates a unicast IP address for which the switch has filtering information." ::= { swL2ACLQosDestinationIpFilterEntry 2 } swL2ACLQosDestinationIpFilterState OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), valid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table." ::= { swL2ACLQosDestinationIpFilterEntry 3 } swL2ACLQosFDBFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2ACLQosFDBFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines information for the device to filter packets with specific MAC address (either as the DA and/or as the SA). The MAC address can be a unicast address or a multicast address. This table has higher priority than both static FDB table and IGMP table. It means that if a MAC address appears on this table also appears on the static FDB table, the device will use the information provide by this table to process the packet." ::= { swL2ACLQosMgmt 7 } swL2ACLQosFDBFilterEntry OBJECT-TYPE SYNTAX SwL2ACLQosFDBFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about a specific unicast/multicast MAC address for which the switch has filtering information." INDEX { swL2ACLQosFDBFilterVlanName, swL2ACLQosFDBFilterMacAddress } ::= { swL2ACLQosFDBFilterTable 1 } SwL2ACLQosFDBFilterEntry ::= SEQUENCE { swL2ACLQosFDBFilterIndex INTEGER, swL2ACLQosFDBFilterVlanName DisplayString, swL2ACLQosFDBFilterMacAddress MacAddress, swL2ACLQosFDBFilterState INTEGER } swL2ACLQosFDBFilterIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The index of this rule." ::= { swL2ACLQosFDBFilterEntry 1 } swL2ACLQosFDBFilterVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The existence of VALN name." ::= { swL2ACLQosFDBFilterEntry 2 } swL2ACLQosFDBFilterMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object will filter on destination MAC address operates on bridged packets, but not on routed packets. And It will filter on source MAC operates on all packets." ::= { swL2ACLQosFDBFilterEntry 3 } swL2ACLQosFDBFilterState OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), valid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table." ::= { swL2ACLQosFDBFilterEntry 4 } swL2ACLQosIpFragmentFilterDropPkts OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decide to drop fragmented IP packets or not." ::= { swL2ACLQosMgmt 8 } swL2ACLQosSchedulingTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2ACLQosSchedulingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The switch contains 4 hardware priority queues. Incoming packets must be mapped to one of these four queues. Each hardware queue will transmit all of the packets in its buffer before allowing the next lower priority queue to transmit its packets. When the lowest hardware priority queue has finished transmitting all of its packets, the highest hardware priority queue can again transmit any packets it may have received." ::= { swL2ACLQosMgmt 9 } swL2ACLQosSchedulingEntry OBJECT-TYPE SYNTAX SwL2ACLQosSchedulingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information specifies the Qos output scheduling Table." INDEX { swL2ACLQosSchedulingPortIndex, swL2ACLQosSchedulingClassId } ::= { swL2ACLQosSchedulingTable 1 } SwL2ACLQosSchedulingEntry ::= SEQUENCE { swL2ACLQosSchedulingPortIndex INTEGER, swL2ACLQosSchedulingClassId INTEGER, swL2ACLQosSchedulingWRRValue INTEGER } swL2ACLQosSchedulingPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of logical port." ::= { swL2ACLQosSchedulingEntry 1 } swL2ACLQosSchedulingClassId OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies which of the four hardware priority queues. The four hardware priority queues are identified by number, from 0 to 3, with the 0 queue being the lowest priority." ::= { swL2ACLQosSchedulingEntry 2 } swL2ACLQosSchedulingWRRValue OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the weighted round robin (WRR) the above specified hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets." ::= { swL2ACLQosSchedulingEntry 3 } swL2ACLQosMacPriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2ACLQosMacPriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table indicates the destination mac priority in flow classifier." ::= { swL2ACLQosMgmt 10 } swL2ACLQosMacPriorityEntry OBJECT-TYPE SYNTAX SwL2ACLQosMacPriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information specifies the destination mac priority in flow classifier." INDEX { swL2ACLQosMacPriorityVlanName, swL2ACLQosMacPriorityDstMacAddress } ::= { swL2ACLQosMacPriorityTable 1 } SwL2ACLQosMacPriorityEntry ::= SEQUENCE { swL2ACLQosMacPriorityIndex INTEGER, swL2ACLQosMacPriorityVlanName DisplayString, swL2ACLQosMacPriorityDstMacAddress MacAddress, swL2ACLQosMacPriorityPriorityValue INTEGER, swL2ACLQosMacPriorityState INTEGER } swL2ACLQosMacPriorityIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The index of this rule." ::= { swL2ACLQosMacPriorityEntry 1 } swL2ACLQosMacPriorityVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The existence VLAN name." ::= { swL2ACLQosMacPriorityEntry 2 } swL2ACLQosMacPriorityDstMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object will filter on destination MAC address operates on bridged packets, but not on routed packets. And It will filter on source MAC operates on all packets." ::= { swL2ACLQosMacPriorityEntry 3 } swL2ACLQosMacPriorityPriorityValue OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the priority related to one of 8 hardware priority queues." ::= { swL2ACLQosMacPriorityEntry 4 } swL2ACLQosMacPriorityState OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), valid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table." ::= { swL2ACLQosMacPriorityEntry 5 } -- ******************************************************************** -- swL2MgmtPortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 } -- ******************************************************************** swL2MgmtPortCurrentLinkStatus OBJECT-TYPE SYNTAX INTEGER { other(1), link-pass(2), link-fail(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current management port link status." ::= { swL2MgmtPortMgmt 1 } swL2MgmtPortCurrentNwayStatus OBJECT-TYPE SYNTAX INTEGER { other(1), half-10Mbps(2), full-10Mbps(3), half-100Mbps(4), full-100Mbps(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current management port speed and duplex mode." ::= { swL2MgmtPortMgmt 2 } swL2MgmtPortAdminState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decide the management port enabled or disabled." ::= { swL2MgmtPortMgmt 3 } swL2MgmtPortNwayState OBJECT-TYPE SYNTAX INTEGER { other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Chose the management port speed, duplex mode, and N-Way function mode." ::= { swL2MgmtPortMgmt 4 } swL2MgmtPortFlowCtrlState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames." ::= { swL2MgmtPortMgmt 5 } swL2MgmtPortLinkUpDownTrapEnable OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether linkUp/linkDown traps should be generated for the management port. By default, this object should have the value enabled(3)." ::= { swL2MgmtPortMgmt 6 } END