* Rewrite Poller Management to Blade/Eloquent
* remove further no more needed file
* Code Climate
* Code Climate
* hardcode tabs
* change URL style
* change prefix from poller-groups to poller
* .
* parameter fix
* Refactor to use more direct routing.
remove switch statement.
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Add quotes around the word mail
The word 'mail' needs quotes around it so php will use it as a string instead of a variable name.
* Double quotes to Single as is in the rest
* Added bad_iftype to iosxe.yaml definition
* Update Configuration.md
Updated file location from includes/defaults.inc.php to misc/config_definitions.json and added an example of OS specific bad_iftype entries.
* Added OS Specific example for ignoring interfaces and updated file location.
* Updated bad_if selection documentation
Hello,
If you follow the original Rumi config, the path to the binaries are not changed, so you cannot do php -v after the yum install line.
If you install the yum-package-manager then apply the repo, all php packages become rumi php packages.
I hope the yum install line is correct, as i've tried to edit it and i hope i didnt miss any packages.
* puppet agent monitoring
* change position of last run graph
* device overview panel
* updating documentation
* mouseover for Overview Dashboard
* adding blank line for code climate
I struggled to get this working, so thought I would add my steps to the FAQ to help future users. Thanks to @murrant for the step about the .env file, that was the last piece of the puzzle.
Co-authored-by: Hans Erasmus <erasmushans27@gmail.com>
* Migrate ironware sensor discovery from php to yaml.
* More sensors, add grouping.
* dynamic_discovery_get_value() becomes getValueFromData()
* Target a specific index with skip_values.
* Improve Brocade BGP session discovery/polling
This commit allows for the correct discovery of BGP sessions
with 32-bit ASNs, IPv6 neighbors using the BGP4V2-MIB which is
based on draft-ietf-idr-bgp4-mibv2-11 and also polls for IPv4
unicast received routes through the FOUNDRY-SN-BGP4-GROUP-MIB.
Copied most of the code from PR#8877 by @Mikeburke14, cleaned
up the code a little bit to match the normal LibreNMS style,
and fixed bgpPeers_cbgp discovery as well as polling for the
ipv4.unicast neighbors.
Note that older Brocade IronWare firmware versions are known
to have multiple defects relating to the BGP4V2-MIB which
might result in certain missing non-established neighbors.
Related vendor defect numbers:
- DEFECT000633962
-- Symptom: The OID bgp4V2PeerAdminStatus does not return the
correct value
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00g
- DEFECT000583319
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display all the BGP entries
-- Reported: NI 05.6.00
-- Resolved: NI 05.8.00e
- DEFECT000550309
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display the full information
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00c
* Add ironware CER & ICX platform test data.
* Re-add ironware.json compatible with current master branch.
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
* extend FS switches support
* MIB compilation
* HW and Ver
* sensors and CPU
* tests
* correct version
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to replace "down" with "not up" :)
* fix other ifOperStatus checks
Removed the old doc that has an email address entered by comas, this is no longer needed with transports. A admin can make transport for each user or make a group of users.
* Update Oxidized.md
Hello,
I think this could be really useful, i searched for a long time before finding that command would work in a bare repo.
It allow to remove deleted devices that we don't have anymore.
* Update Oxidized.md
* Add option to authenticate user independtly of OU
* Set config option in webui
* Compatibility with bind username option
* ran ./lnms translation:generate
* update doc
* Clean broken VRF lite code
* Change DB table for route discovery
* Add VRF simple support
* add port_id to db and discovery
* static-fy the translation arrays
* sort and search cleaning
* Sorting refactor and validation
* formatItem shortened
* Handle ifIndex==0 meaning no next hop defined (MPLS)
* Sync all create/updates
* purge in daily
* remove old route table
* get rid of inetCidrRouteNextHop_device_id
* fix wonky column orders
* add route snmprec
* fix sorting by interface
* Move to new config
* rename to route the new table
* Properly display ipv6 compressed addresses
* Translation before merge ./lnms translation:generate
* Update manifest
additional translatable strings: Filter Settings in settings page and Global Search on all pages.
remove duplicate fr key
also, language file signatures were wrong as I had a testing version of the vue generator
* Unbundle javascript language files
automatically generated for each install
* update docs
* update laravel-vue-i18n-generator
a newer (unreleased) verison is need for English fallback to work
* Add Headers and body
add PUT Method
* fix check length of headers
* bad commit
* style check
* better body description
* Descr and RFC enforcement on 'PUT' and body
Only PUT can accept a statically defined body. GET will ignore it (RFC) and POST body is generated with the parameters.
* Process the variables as well for headers
* Update Api.php
* update docs
* Seafile Monitoring
* generalized function for application with multiple similar entries
* adding snmprec file
* Create linux_seafile-v1.json
* Update linux_seafile-v1.snmprec
Updated linux_seafile-v1.snmprec to use 4x for encoding json data response
* Update Applications.md
* Add memcached to DS-docs
As per request from @murrant in Discord, here is a small update on the Dispatcher service still needing a central memcached
* Update Dispatcher-Service.md
* Update Dispatcher-Service.md
* api: add domain type for list_devices function
api: add domain type query for list_devices
undo librenms-docker specification.
* api: list_devices change domain query by hostname. fix to search pattern in hostname
* Update Devices.md
* initial db/defaults dump
* numeric values
* Remove $config['time']
* Use config_definitions.json
* try setting definition as a complete array
* a little more
* fix format
* WIP converting dynamic setting pages
* rewriting the webui
* remove legacy and add translations
* finish email section
* improve navigation
update js a bit
* Import the remaining existing settings
* Update backend still some wip
migration
* fix config loading (db not overriding defaults)
* some cleanup
* more array collapsing
* update settings
* Settings search
* add purge settings to ui, order groups and sections
* collapse more arrays
* Auth definitions WIP
* remove needless slash escapes
* add warning to json
* moving settings from defaults.inc
* remove slow_statistics
* Move rrdtool settings to the poller section
* Use translations more consistently
* removing more settings from defaults.inc.php
* show setting name in tooltip
* allow help text to be shown on mobile
* disable settings that are set in config.php
* Implement undo and reset to default.
* Vue.js functional
* Vue.js WIP
* Implement tabs component
* accordion WIP
* lodash ver update
* two items
* Accordion somewhat working
* hash navigation
* Refine Accordion
* Fix up tab styling a bit
* Cleaner tab selected property
Hide html while loading
* spinner?
* Icon support
property for accordion to active
* WIP
* Tabs/Sections from ajax
* Setting Component skeletons
* Dynamic Component resolution
* Basic functionality
* toggle class
* Refactor components
* translate tabs and accordions
* simple array attempt
* improve readonly tooltip
* array styling
* array value editing
* organize snmp info
* Handle initial tab/section in url
* Use Laravel to parse tab/section, dump old
* Draggable array entries
* v-tooltip, for clickable (and touch) help tooltips
disable draggable
* Navigation WIP
* Navigation WIP
* groups computed
* filter settings
* fix event reference
* vue.js i18n initial
* missing description = just setting name
* en fallback
* tidy up the language support and js generation
* persist value to db
* fix issue with 0
* Delete settings from DB instead of setting them to default
* ldap-groups
fixup style
* Default dashboard selection
* fix array of options instead of object
* allow custom validation for settings
* translate options in SettingSelect
* SNMP v3 WIP
* fix setting arrays
* Split persist out of set
* Hook up events for SNMP v3 Auth
correct Config::persist behaviour with arrays
* dependent settings (primitive for now)
actually update the settings values in the LibrenmsSettings component
* more complex "when" behaviour
* remove un-needed seeder
* add poller_modules.cisco-qfp
* remove en.json (disable warning)
* don't set default for log_dir or log_file, otherwise it won't be processed correctly
* Fix module order
add some missing settings
* more config corrections
* correct graphs
correct loading values set to null (although it should have no difference)
remove project_name_version
* Add nfsen settings. Docs are very confusing, so might have flubbed something
remove option for array definition of select option as numeric indexes messes it up
* Correct more upstream config differences
* Config cleanup after a bunch of merges.
* Fixes
* add version tags to js/css files
remove old js
* Print out full settings list read-only
* Add http_proxy setting
fix indents in config_definitions.json
* repeaters default is 0 (aka 20)
* cleanups
* rewrite the dynamic config docs
* add language docs
* Don't show snmp v3 auth add/remove if disabled by config.php
* Improve instructions
Documentation when open_basedir is set
Also gives list of packages when installing php-fpm
Fixes cron and logrotate files not being executed if umask is set
* Split dependencies universal / php
* Updated php doc
* Add more binaries to open_basedir
* fix a few bare URLs
* make mdl happy
* make Weathermap.md as mdl happy as possible
* make Varnish.md as mdl happy as possible
* make Two-Factor-Auth.md mdl happy
* touch one header for Syslog.md, but little can be done about the rest
* make Sub-Directory.md as mdl happy as possible
* make SNMP-Trap-Handler.md lint happy
* make SNMP-Proxy.md mdl happy
* make Smokeping.md as mdl happy as possible
* make Services.md mdl happy
* make RRDTune.md mdl happy
* cleanup RRDCached.md as much as possible
* make RRDCached-Security.md mdl happy
* make Rancid.md as mdl happy as possible
* make Proxmox.md mdl happy
* make Plugin-System.md as mdl happy as possible
* make PeeringDB.md mdl happy
* make Oxidized.md more lint happy
* make Network-Map.md mdl happy
* make MIB-based-polling.md as mdl happy as possible
* make Metric-Storage.md mdl happy
* make IRC-Bot.md as mdl happy as possible
* make IRC-Bot-Extensions.md as mdl happy as possible
* make
* make Graylog.md mdl happy
* make Gateone.md mdl happy
* make Fast-Ping-Check.md mdl happy
* make Distributed-Poller.md as mdl happy as possible
* make Dispatcher-Service.md as mdl happy as possible
* make Device-Groups.md mdl happy
* make Dell-OpenManage.md mdl happy
* make Dashboard.md mdl happy
* make Customizing-the-Web-UI.md as mdl happy as possible
* make Component.md mdl happy
* make Billing-Module.md mdl happy
* make Auto-Discovery.md mostly mdl happy
* make Authentication.md as mdl happy as possible
* tidy up a few lines in Applications.md
* make Agent-Setup.md as mdl happy as possible
* make metrics/OpenTSDB.md mdl happy
* spelling fix
* Added Recent Graylog Entries to Device Overview (WIP)
* Improved "Recent Graylog" entries on device overview (WIP)
Added $config['graylog']['device-page']['rowCount'] to set maximum rows shown in "Recent Graylog" on device overview (Default: 10)
Added $config['graylog']['device-page']['maxLevel'] to set the maximum message level shown in "Recent Graylog" on device overview (Default: 7, validates value to be >= 0 and <= 7)
* Fixed code styling issue
* Added Log Level filter to Graylog widget
Added Log Level filter to Graylog pages (device pages and graylog overview)
* Added documentation for new configuration options
* Removed unneccesary (and already commented) using
Renamed "maxLevel" to "loglevel" as suggested by a colleague
* Added doc for $config['graylog']['loglevel']
* Removed includes/html/print-graylog.inc.php and inlined it in includes/html/pages/device/overview/graylog.inc.php
Removed comma in json object in resources/views/widgets/graylog.blade.php
Replaced translation strings in resources/views/widgets/settings/graylog.blade.php with existing translation strings
* log level -> minimum log level
* Use Config::get() default functionality
* Oops
* Update Applications.md for mysql
Specified for Mysql the host 127.0.0.1 useful in some specific configs. Switched also the 6 <-> 7 steps, which makes more sens because of the package install (mysqli is needed for snmp extend).
* Add Open-Audit link display device asset details
* Add an external link using the template method
* Add external system link setting.
* Update device.inc.php
* Update Customizing-the-Web-UI.md
* rework the nfsen stuff
* add the new netflow stats page
* update the docs for nfsen
* add the functions back in
* readd the defaults
* rework lowest_five_minutes into lowest_time
* nfsen_channel_rrds removed and will rework it in later post rewriting
* rework something that accidentally got nuked in merging
* rework formatting a bit
* remove a accidentaly added chunk of text =^.^=
* rework some tag capitalization
* remove a accidentally added [
* '='=>' = '
* Add more api helper functions
to centralize code more
* Enable cors
* Initial Legacy route in Laravel
* Force api v0 responses to json
Add a couple more routes
* more paths, pretty print the json response
pass parameters to the api function
* devices basic functions
* Port generic graph function
check permissions function accepts callback to avoid lots of if statements
* move vlans
* links
* graphs
* fdb
* health
* wireless
* port graphs
* ip functions
split em up
* port_stack
* components
* compoment add/edit/delete
* get_device_groups
* port stats
* port graphs
* get_devices_by_group
* port_groups
* api_get_graph
* show_endpoints
* get_bill
* get_bill_graph
* get_bill_graphdata
* get_bill_history
* get_bill_history_graph
* remaining bill functions
* list_alerts
* ack/unmute alert
* Some cleanups
* Some cleanups
* list_alert_rules
* alert rule add/edit/delete
* inventory
* list_cbgp
* vrf
* list_ipsec
* list_fdb
* list_links (fix both usages)
* list_locations
* list_locations
* list_vlans
* list_ip_addresses
* list_arp
* list_ip_networks
* cleanup
* services
* list_logs and fix authlog.......
* cleanup
* cleanup 2
* remove slim
* don't load schema more than once
* basic test
* fix style
* downgrade laravel-cors to a version that supports PHP 7.1
* Added findByHostnameOrIp($hostnameOrIp) for devices.
Returns Device or null
Fixed Graylog device links, "device" parameter in URL was IP or Hostname instead of device id before
Added Severity number to name conversion. Can be activated by setting $config['graylog']['severity-names'] = "true" in config
Added Facility number to name conversion. Can be activated by setting $config['graylog']['facility-names'] = "true" in config
* Added $config['graylog']['match-any-address']. To enable matching Graylog entries by any interface address set to "true"
Added code to match Graylog entries by any interface address instead of only hostname or primary address
* Fixed missing quotation marks in <script> block in includes/html/common/graylog.inc.php:46, causing graylog page only load header with empty table. Introduced in https://github.com/librenms/librenms/pull/10447
* Modified code to reduce complexity as mentioned by codeclimate
* Changed findByHostnameOrIp($hostnameOrIp) as mentioned by https://github.com/murrant
* Added Language File "syslog.php" for Syslog Severity and Facility
Merged functions "levelName($level)" and "facilityName($facility)" to "syslogPrioParser($type, $value)" where $type should be "facility" or "severity" and $value the numeric or text facility or severity. Returns "NUMBER (NAME)" if possible, otherwhise returns $value
* Shortened findByHostnameOrIp($hostnameOrIp) as mentioned by https://github.com/murrant
* Add shortcut ipv4 and ipv6 device relationships
Better code for adding source addresses
Only translate level and facility if they are numeric
Allow level and facility to be sortable
No need for device link if we know it won't work. Before the code was punting to save sql queries.
* Cache devices
Took queries from 69 to 6 in my quick test.
* Added Documentation for $config['graylog']['match-any-address']
* Fixed missing quotation marks in app/ApiClients/GraylogApi.php:125
* Modification of the getUserlist fonction to use ldap filter
* Modification of the getUserlist fonction to use ldap filter V2
* documentation of auth_ldap_Userlist_filter option
* documentation of auth_ldap_Userlist_filter option V2
* Allow filtering of getUserlist LDAP function
* Transport API - Doc for placeholders
The available placeholders are the same as the Templates documentation but the syntax is not exactly identical.
* Update Transports.md
* Update Transports.md
* Update Transports.md
* clean 1-Minute-Polling.md formatting
* cleanup formatting for Adding-a-Device.md
* clean up formatting of Cleanup-options.md
* cleanup formatting some for CLI-Tools.md
* cleanup formatting for Syslog.md and Configuration.md
* cleanup formatting for Device-Sensors.md
* cleanup formatting for Device-Troubleshooting.md
* cleanup Discovery Support.md
* cleanup Environment-Variables.md
* cleanup Example-Hardware-Setup.md and FAQ.mg
* update Features.md, Install Validation.md, Perfermance.md, Poller Support.md, and index.md
* cleanup Remote-Monitoring-VPN.md, SNMP-Configuration-Examples.md, and SSL-Configuration.md
* lots of updates for Installation docs
* more installation doc cleanup
* more formatting cleanup
* clean Work-Map.md up some
* Add support for using Markdown.
Alert templates can be written using Webex Teams (i.e., Spark) Markdown,
which makes for some richer alerts. This option defaults to false to
maintain Principle of Least Astonishment.
* Update Cisco Spark docs.
* Mention that Cisco Spark is now called Webex Teams
* Add support for Markdown
* Refactor text.
Do not exceed 80 characters per line.
* Refactor code to meet style guidelines.
* Remove errant tabs and use spaces instead
* Correct type check
* Remove use of 'else'
* Allow new {{ $xxxx }} syntax
* Properly handle urlencode on variable values without braking the URL, and uses Blades
* Doc
Doc typo
* use Guzzle for HTTP requests
* Add Basic auth support
* Doc update
* clean
* Revert Blades, but keep the {{ $xxxx }} syntax
* Revert Blades, but keep the {{ $xxxx }} syntax
* Init Vars and comments
* Notifications
* api-options are not required
* Update notifications.rss
* Default to null for group yaml discovery.
* Update test data for a154bda yaml group null fix.
* Changes to guessed limit functions for sensors.
Original behaviour
===================
The file `includes/discovery/functions.inc.php` contains
`sensor_limit_low()` and `sensor_limit()` which both attempt to
guess a sane value for sensors when no explicitly defined
low_limit or high_limit can be found during discovery.
Both switch control structures used in those two functions
have empty case statements which means that if one of those matches,
it's going to fall through and run the code for each subsequent
case until a `break` is reached.
For example, when we call `function sensor_low_limit(dbm, -13.036)`
it will return the value `-12.3842` instead of `null`. That is
because there will be a match at `case 'dbm':` which falls through
all the way to `case 'cooling':`, where it performs
`$limit = -13.036 * 0.95` before hitting a `break`.
Changed behaviour
===================
Removed `power_consumed` and `count` guessed low_limit and
high_limit, I personally added those sensor classes in PR #9471
when I didn't understand that a switch control structure has
fall-through behaviour so I can guarantee that guessing limits for
those is a mistake on my behalf. It should not be there, only
power_factor can have guessed limits. Apologies for the issue,
I'm still a beginning programmer!
Furthermore, I removed guessed high_limit values for `current`
and `power` because these are supposed to draw higher values as
more devices or components are installed on for example a PDU or
a chassis.
Finally, I removed guessed low_limit and high_limit for `dbm`
sensors, there is a much too large variance in power budget on
commercially available optical transceivers for there to be a
sensible window where you can guess these values.
* Documentation on adding sensor classes.
* Update test data - sensor limit changes @ 30212d2
* clean up all but header incrementing in Creating-Transport.md
* make Device-Dependencies.md mdl happy
* make Entities.md as mdl happy as possible... one long table line left
* make mdl as happy as possible for index.md
* clean up Introduction.md as much as possible
* minor formatting cleanup... move each icon onto its own row
* make ack and notes the same style
* clean Macros.md up
* clean Rules.md up as much as possible
* tweak one line a bit to get it to format a bit nicer
* a bit more format tweaking, making sure it does not sure with >
* clean up as much as possible for Templates.md
* make Testing.md as mdl happy as possibly
* clean Transports.md up as much as possible
* clean as many issues as possible for Alerts.md
* clean up as much of ARP.md as possible
* clean up as much as possible for Bills.md
* make DeviceGroups.md as mdl happy as possible
* cleanup Devices.md
* make as mdl happy as possible Inventory.md and index.md
* mdl cleanup for Logs.md and PortGroups.md
* make Ports.md and Routing.md as happy as possible
* clean up Services.md, Switching.md, and Systems.md as much as possible
* more markup cleanup
* lots more md cleanup udner Devloping/
* reapply bits from #10343 that accidentally got removed when merging
* Device Groups rewrite
Updated web ui
Static or dynamic groups allowed
Alert rule query builder
Translation support
Permissions support
* cleanup, make relationship save, and validate it
* builder WIP
* rules builder and rules saving/loading
* Parse query builder to Laravel Fluent query
* Upgrade existing groups when editing.
Properly update only dynamic groups when polling.
* remove unused old code
Update API and other places to use Eloquent
* debug output in poller restored
* Fix up some things
creating static
improved validation
fix js error on creation
Fix static groups in polling
* hide pattern for static group
* Implement authorization
Use in the menu too
* update schema
* fix rollback
* Don't abort on invalid queries
* fixes to query builder
* add test data, looks like macros aren't handled (omitted them because groups don't use them generally)
* Add macro support for QueryBuilderFluentParser
* add test for macro that accepts value
* More space in forms
Retain rules when converted to static
no duplicate names allowed
* Better error feedback
Update related devices on save
* Add button icon
* format
* update docs
* fix tests
* Fix some QueryBuilderFluentParser issues with OR
updated/more test data
* Show device groups runtime
fix querybuilder.json format
* Store table joins in the rules to minimize polling time
Update group joins in daily.sh (and when they are saved)
* Update daily.php
* Add units to time
* Device Groups rewrite
Updated web ui
Static or dynamic groups allowed
Alert rule query builder
Translation support
Permissions support
* cleanup, make relationship save, and validate it
* builder WIP
* rules builder and rules saving/loading
* Parse query builder to Laravel Fluent query
* Upgrade existing groups when editing.
Properly update only dynamic groups when polling.
* remove unused old code
Update API and other places to use Eloquent
* debug output in poller restored
* Fix up some things
creating static
improved validation
fix js error on creation
Fix static groups in polling
* hide pattern for static group
* Implement authorization
Use in the menu too
* update schema
* fix rollback
* Don't abort on invalid queries
* fixes to query builder
* add test data, looks like macros aren't handled (omitted them because groups don't use them generally)
* Add macro support for QueryBuilderFluentParser
* add test for macro that accepts value
* More space in forms
Retain rules when converted to static
no duplicate names allowed
* Better error feedback
Update related devices on save
* Add button icon
* format
* update docs
* fix tests
* Split install steps into git clone and composer install
This gives the admin a little more knowledge about how to maintain the system, showing them composer_wrapper.php and su - librenms
They will get errors if composer_wrapper doesn't work because of a proxy or no internet connection
We lose stats on packagist.org (https://packagist.org/packages/librenms/librenms/stats)
If we wanted to keep stats, we could use:
```
COMPOSER_ALLOW_SUPERUSER=1 composer create-project --no-dev --no-install --keep-vcs librenms/librenms librenms dev-master
```
not sure that is worth it.
* fix composer_wrapper.php path
* Added configuration options to aggregate input and output bits before making 95th percentile billing calculations
* Changed aggregate to per-bill instead of global. Added config options for making aggregate the default selected option. Refactored out mres() calls in touched files. Changed to Config::get where appropriate.
* Fixed documentation typo
* Fixed scope of aggregate default config option to be under billing
* Instructions for logstash
How to configure logstash to send syslog to LibreNMS
* remove silly ssh syntax tags
* Fixed date formatting issue for afternoon times
* Refactor LibreNMS service
add ping
* services ported
remote legacy stats collection
* alerting
* implement unique queues
* update discovery queue manager
* remove message
* more cleanup
* Don't shuffle queue
* clean up imports
* don't try to discover ping only devices
* Fix for discovery not running timer
* Update docs a bit and and add some additional config options.
Intentionally undocumented.
* Wait until the device is marked up by the poller before discovering
* Handle loosing connection to db gracefully
* Attempt to release master after 5 db failures
* Sleep to give other nodes a chance to acquire
* Update docs and rename the doc to Dispatcher Service to more accurately reflect its function.
* add local notification
* Remove legacy index php file
* fix routing page missing data
* WIP
* fix $navbar global usage
* remove global use of $locations
* ObjectCache again...
* move vars.inc.php to init.php for legacy ajax
* navbar is more local than I thought before. Fix it.
* Fix some sensors tables escaping
* restore custom menu functionality, but with blade
and docs
* cleanup
* tidy menu @if checks
* Fix up the rest of the global variables and remove print-menubar.php
* consolidate some counting in the menu
* filter out empty custom port descr types
* Fix up custom port groups
* Fix up apps menu
* Fix services menu when all are ok
* Limit cached data to the user it is for
* Fix style
* A few clean ups
* fix pseudowire bug
* Add 'software-properties-common'
Running 'add-apt-repository universe' only work with 'software-properties-common' already installed.
* Update Installation-Ubuntu-1804-Apache.md
* documentation: Fix html/includes directory path
- Changed `html/includes` to `includes/html`
- Added overview of directories mentioned on the page
* documentation: Cleanup Code-Structure.md
- Reorganized document
- Added `includes/html/graphs` on the list
- Changed terminology (from folder to directory)
- Removed part referencing old auth method using authenticate.inc.php (changed in #8702)
* Rewrite user management.
Error management
Revert edituser legacy page
Connect user permissions button to legacy page for now.
Implement user creation
Refine form
Remove PingCheck.php accidental add :)
Fixes for redirection and deletion
More fixes: realname accidental validation setting, hide can modify for read-only auths
Use a panel to improve style
Add icon to panel-title
Not allowed to delete own user (at least via the click of a button)
Use request validation to reduce complexity of controller.
Improve protection against users doing things they should not.
Switch to horizontal form and not nearly as wide of layout :)
delete without refresh.
Fix for buttons
Include all users (not just from this auth)
Hide the auth column if there is only one auth type
Show username if real name isn't set
Don't allow creation of demo users via the webui
a fix to the lnms user:add command, it didn't set auth_id
update edituser.inc.php to current
just redirect to users page
* Remove TwoFactorTest for now
* Update edituser.inc.php
* Update .env.dusk.testing
* Enable 2fa for 2fa test...
Add FDB API calls to resolve this [forum request](https://community.librenms.org/t/fdb-table-search-via-api-mac-ip-switch-port/1772/4)
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
Update snmpd instructions for Linux to reflect the ability to use @reboot declaration in the crontab. This is probably preferable to rc.local, which is apparently not supported or possible deprecated in Ubuntu or CentOS7.
* Update documentation to reflect matching behaviour
Added a note to help users with matching patterns for Oxidized OS matching patterns.
* Update Oxidized.md
* Ignore session.cookie_secure errors
They happen if the session is already started.
* Don't allow secure cookies to be enabled when not accessing via https
* Completely remove the setting
* Automatic sensor limits are now optional. Set ['discovery']['sensors']['autolimit'] = false to disable.
* Changing new config variable name from discovery.sensors.autolimit to sensors.guess_limits
* Updated documentation: ['sensors']['guess_limits'] value added
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* Codeclimate
* Initialisation + comments
* Like this
* refactor: advanced sensor states
mark create_state_index($state_name) as E_USER_DEPRECATED?
* fix: minor corrections
* fix: mib has partialSync(9) and incompatibleVersion(8)
* fix: corrected netagent2upsstate - Sleeping(5)
* fix: NetAgent2 upsThreePhaseUPSStatusInverterOperating correction
* refactor: array() be gone
* Refactoring includes/discovery/sensors/state/extendair.inc.php with arrays
And tidying up array formatting in other files
* fix: minor typo
* standardising array item names
removed redundant "if ($state_index_id !== null) {"
* workaround: procurve & serverscheck
a sensor is causing create_state_index($state) to return null.
The updated code doesn't allow for this and thus a hybrid is being used.
* standardised naming of state info. Caused a typo $state_name instead of $status_name
$state_name is the standard
* converted compas to square arrays
* Converted APC states using preg_match to new create_state_index() call
* Update boss.inc.php
* Migration script and data feeding
* Adding the columns in the GUI
* build schema
* update FDB test data
* Use of timestamps()
* ignore created_at and updated_at in tests, and regenerate test impacted
* daily.sh does the cleaning
* space cleaning codeclimate
* Use carbon instead of str-val
* handle when $fdb_entry->updated_at and created at are null
* handle when $fdb_entry->updated_at and created at are null (force travis rerun)
* Doc update
* Doc update
* Updated JumpCloud authentication example
Updated JumpCloud authentication example. Relevant Community Support Thread: https://community.librenms.org/t/ldap-with-jumpcloud/6883
* Updated JumpCloud authentication example.
Updated JumpCloud authentication example in accordance with @murrant review.
I'm walking through installing smokeping, and running into some minor issues in the docs.
Basically:
1. Smokeping is a `fastcgi` application, and the config in the docs assumes that you have a fastcgi handler installed (`fastcgi_pass unix:/var/run/fcgiwrap.socket;`). I did not, and you get confusing errors.
2. I'm still not sure where the smokeping stuff is supposed to show up in the UI.
* Change in the Canopsis transport to make it 3.9.0 compliant and link to
the new documentation
* Add missing php72 module on Centos
* Fixing documentation for AMQP based tranport outside of the main doc
* Update Applications.md
Added the directions for installing the Nagios check check_postgres.pl for the Postgres Application.
* Update Applications.md
Remove git building instructions and simply adding a link to https://github.com/bucardo/check_postgres.
* be more specific about duplicate IP addresses
* generate TAGS for emacs
* note on using mkdocs, and make docs rule
* ignore emacs temp files
* Update .gitignore
* Update functions.php
* Update Makefile
* Update Creating-Documentation.md
* Fix some comment and documentation typos.
* Fix various entphysical page display issues.
- Resolve flickering during loading (missing liClosed for nested items).
- Clicking a sensor actually takes you to the matching graph now.
* Add a few nicecase() calls to clean up html page display.
* Create discover_entity_physical() function
- Add discover_entity_physical() function into includes/discovery/functions.inc.php
- This allows for an easy implementation of OS-specific entity-physical discovery.
- Update includes/discovery/entity-physical/entity-physical.inc.php to use the new function.
* Add power_consumed and power_factor sensors.
* Two new icons, make more entPhysical data visible.
* Pre-commit fix: blank line found at end of control structure.
* Add Schleifenbauer OS support.
* Now really fix the comment typo.
* Fix parsing mistakes.
* Add a generic count sensor.
* Make the Schleifenbauer discovery use count instead of state sensors.
* Don't place count sensor at the top, add sane limits for Schleifenbauer
* Finetuning the rrd_options, changing Schleifenbauer sensor names.
* Update schleifenbauer.svg
* optimize logo too
* add test data
* fix sensor value display (spaces break it)
* update entPhysicalIndex
