* removing $graphs global
* remove unused things
* fix some additional graphs
* Fix graphs persisting too soon
* correct name for poller module performance graph
* only one type of graph is used here
* Change Units on Noise Floor
I may be wrong, but I think this should just be dBm (i.e. integrated over the carrier bandwidth). The numbers look much too high to me to be on a per Hz basis.
If I am correct here, this should also be updated in the web interface.
Thanks!
* Update php, correct units for Wireless noise-floor
* Wireless Frequency, don't format_si, to avoid kMHz units
* Update Wireless noise-floor units, in RRD plots
* Added discovery and graphing for JunOS (SRX) RPM probes
* Proposed changes for a percent based sensor type
* Fixed missing MIB declaration in JunOS YAML discovery file
* Updated Health-information.md to reflect the new percentage value type
* Added separate test data for junos_rpm type
* Update sensors.php
* Update sensors.php
* Update functions.inc.php
* test re-run
* Update junos_rpm.json
* percentage -> loss
* add ifSpeed prev test data
* mis-merge
* update sensors
* and bgp...
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
Co-authored-by: Tony Murray <murraytony@gmail.com>
* added functionality to set sysLocation override in $os.inc.php files
* php styling fixes
* updated docs for location override in $os.inc.php
* patch poweralert.inc.php to use $location override
* added location override for enexus (Eltek)
* update phpdoc for set_device_location()
* converged location code in core.inc.php to use set_device_location()
* added new snmprec test data for enexus os
* Travis test data
* remove enexus_smartpacks2 test data
* Revert "remove enexus_smartpacks2 test data"
This reverts commit 36c8fc7036.
* updated enexus_smartpacks2 test data with generic syslocation
* kick travis CI
* kick travis CI
* Migrate ironware sensor discovery from php to yaml.
* More sensors, add grouping.
* dynamic_discovery_get_value() becomes getValueFromData()
* Target a specific index with skip_values.
* Improve Brocade BGP session discovery/polling
This commit allows for the correct discovery of BGP sessions
with 32-bit ASNs, IPv6 neighbors using the BGP4V2-MIB which is
based on draft-ietf-idr-bgp4-mibv2-11 and also polls for IPv4
unicast received routes through the FOUNDRY-SN-BGP4-GROUP-MIB.
Copied most of the code from PR#8877 by @Mikeburke14, cleaned
up the code a little bit to match the normal LibreNMS style,
and fixed bgpPeers_cbgp discovery as well as polling for the
ipv4.unicast neighbors.
Note that older Brocade IronWare firmware versions are known
to have multiple defects relating to the BGP4V2-MIB which
might result in certain missing non-established neighbors.
Related vendor defect numbers:
- DEFECT000633962
-- Symptom: The OID bgp4V2PeerAdminStatus does not return the
correct value
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00g
- DEFECT000583319
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display all the BGP entries
-- Reported: NI 05.6.00
-- Resolved: NI 05.8.00e
- DEFECT000550309
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display the full information
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00c
* Add ironware CER & ICX platform test data.
* Re-add ironware.json compatible with current master branch.
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
additional translatable strings: Filter Settings in settings page and Global Search on all pages.
remove duplicate fr key
also, language file signatures were wrong as I had a testing version of the vue generator
* Unbundle javascript language files
automatically generated for each install
* update docs
* update laravel-vue-i18n-generator
a newer (unreleased) verison is need for English fallback to work
* initial db/defaults dump
* numeric values
* Remove $config['time']
* Use config_definitions.json
* try setting definition as a complete array
* a little more
* fix format
* WIP converting dynamic setting pages
* rewriting the webui
* remove legacy and add translations
* finish email section
* improve navigation
update js a bit
* Import the remaining existing settings
* Update backend still some wip
migration
* fix config loading (db not overriding defaults)
* some cleanup
* more array collapsing
* update settings
* Settings search
* add purge settings to ui, order groups and sections
* collapse more arrays
* Auth definitions WIP
* remove needless slash escapes
* add warning to json
* moving settings from defaults.inc
* remove slow_statistics
* Move rrdtool settings to the poller section
* Use translations more consistently
* removing more settings from defaults.inc.php
* show setting name in tooltip
* allow help text to be shown on mobile
* disable settings that are set in config.php
* Implement undo and reset to default.
* Vue.js functional
* Vue.js WIP
* Implement tabs component
* accordion WIP
* lodash ver update
* two items
* Accordion somewhat working
* hash navigation
* Refine Accordion
* Fix up tab styling a bit
* Cleaner tab selected property
Hide html while loading
* spinner?
* Icon support
property for accordion to active
* WIP
* Tabs/Sections from ajax
* Setting Component skeletons
* Dynamic Component resolution
* Basic functionality
* toggle class
* Refactor components
* translate tabs and accordions
* simple array attempt
* improve readonly tooltip
* array styling
* array value editing
* organize snmp info
* Handle initial tab/section in url
* Use Laravel to parse tab/section, dump old
* Draggable array entries
* v-tooltip, for clickable (and touch) help tooltips
disable draggable
* Navigation WIP
* Navigation WIP
* groups computed
* filter settings
* fix event reference
* vue.js i18n initial
* missing description = just setting name
* en fallback
* tidy up the language support and js generation
* persist value to db
* fix issue with 0
* Delete settings from DB instead of setting them to default
* ldap-groups
fixup style
* Default dashboard selection
* fix array of options instead of object
* allow custom validation for settings
* translate options in SettingSelect
* SNMP v3 WIP
* fix setting arrays
* Split persist out of set
* Hook up events for SNMP v3 Auth
correct Config::persist behaviour with arrays
* dependent settings (primitive for now)
actually update the settings values in the LibrenmsSettings component
* more complex "when" behaviour
* remove un-needed seeder
* add poller_modules.cisco-qfp
* remove en.json (disable warning)
* don't set default for log_dir or log_file, otherwise it won't be processed correctly
* Fix module order
add some missing settings
* more config corrections
* correct graphs
correct loading values set to null (although it should have no difference)
remove project_name_version
* Add nfsen settings. Docs are very confusing, so might have flubbed something
remove option for array definition of select option as numeric indexes messes it up
* Correct more upstream config differences
* Config cleanup after a bunch of merges.
* Fixes
* add version tags to js/css files
remove old js
* Print out full settings list read-only
* Add http_proxy setting
fix indents in config_definitions.json
* repeaters default is 0 (aka 20)
* cleanups
* rewrite the dynamic config docs
* add language docs
* Don't show snmp v3 auth add/remove if disabled by config.php
* Default to null for group yaml discovery.
* Update test data for a154bda yaml group null fix.
* Changes to guessed limit functions for sensors.
Original behaviour
===================
The file `includes/discovery/functions.inc.php` contains
`sensor_limit_low()` and `sensor_limit()` which both attempt to
guess a sane value for sensors when no explicitly defined
low_limit or high_limit can be found during discovery.
Both switch control structures used in those two functions
have empty case statements which means that if one of those matches,
it's going to fall through and run the code for each subsequent
case until a `break` is reached.
For example, when we call `function sensor_low_limit(dbm, -13.036)`
it will return the value `-12.3842` instead of `null`. That is
because there will be a match at `case 'dbm':` which falls through
all the way to `case 'cooling':`, where it performs
`$limit = -13.036 * 0.95` before hitting a `break`.
Changed behaviour
===================
Removed `power_consumed` and `count` guessed low_limit and
high_limit, I personally added those sensor classes in PR #9471
when I didn't understand that a switch control structure has
fall-through behaviour so I can guarantee that guessing limits for
those is a mistake on my behalf. It should not be there, only
power_factor can have guessed limits. Apologies for the issue,
I'm still a beginning programmer!
Furthermore, I removed guessed high_limit values for `current`
and `power` because these are supposed to draw higher values as
more devices or components are installed on for example a PDU or
a chassis.
Finally, I removed guessed low_limit and high_limit for `dbm`
sensors, there is a much too large variance in power budget on
commercially available optical transceivers for there to be a
sensible window where you can guess these values.
* Documentation on adding sensor classes.
* Update test data - sensor limit changes @ 30212d2
* clean up all but header incrementing in Creating-Transport.md
* make Device-Dependencies.md mdl happy
* make Entities.md as mdl happy as possible... one long table line left
* make mdl as happy as possible for index.md
* clean up Introduction.md as much as possible
* minor formatting cleanup... move each icon onto its own row
* make ack and notes the same style
* clean Macros.md up
* clean Rules.md up as much as possible
* tweak one line a bit to get it to format a bit nicer
* a bit more format tweaking, making sure it does not sure with >
* clean up as much as possible for Templates.md
* make Testing.md as mdl happy as possibly
* clean Transports.md up as much as possible
* clean as many issues as possible for Alerts.md
* clean up as much of ARP.md as possible
* clean up as much as possible for Bills.md
* make DeviceGroups.md as mdl happy as possible
* cleanup Devices.md
* make as mdl happy as possible Inventory.md and index.md
* mdl cleanup for Logs.md and PortGroups.md
* make Ports.md and Routing.md as happy as possible
* clean up Services.md, Switching.md, and Systems.md as much as possible
* more markup cleanup
* lots more md cleanup udner Devloping/
* reapply bits from #10343 that accidentally got removed when merging
* Split install steps into git clone and composer install
This gives the admin a little more knowledge about how to maintain the system, showing them composer_wrapper.php and su - librenms
They will get errors if composer_wrapper doesn't work because of a proxy or no internet connection
We lose stats on packagist.org (https://packagist.org/packages/librenms/librenms/stats)
If we wanted to keep stats, we could use:
```
COMPOSER_ALLOW_SUPERUSER=1 composer create-project --no-dev --no-install --keep-vcs librenms/librenms librenms dev-master
```
not sure that is worth it.
* fix composer_wrapper.php path
* documentation: Fix html/includes directory path
- Changed `html/includes` to `includes/html`
- Added overview of directories mentioned on the page
* documentation: Cleanup Code-Structure.md
- Reorganized document
- Added `includes/html/graphs` on the list
- Changed terminology (from folder to directory)
- Removed part referencing old auth method using authenticate.inc.php (changed in #8702)
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* Codeclimate
* Initialisation + comments
* Like this
* refactor: advanced sensor states
mark create_state_index($state_name) as E_USER_DEPRECATED?
* fix: minor corrections
* fix: mib has partialSync(9) and incompatibleVersion(8)
* fix: corrected netagent2upsstate - Sleeping(5)
* fix: NetAgent2 upsThreePhaseUPSStatusInverterOperating correction
* refactor: array() be gone
* Refactoring includes/discovery/sensors/state/extendair.inc.php with arrays
And tidying up array formatting in other files
* fix: minor typo
* standardising array item names
removed redundant "if ($state_index_id !== null) {"
* workaround: procurve & serverscheck
a sensor is causing create_state_index($state) to return null.
The updated code doesn't allow for this and thus a hybrid is being used.
* standardised naming of state info. Caused a typo $state_name instead of $status_name
$state_name is the standard
* converted compas to square arrays
* Converted APC states using preg_match to new create_state_index() call
* Update boss.inc.php
* be more specific about duplicate IP addresses
* generate TAGS for emacs
* note on using mkdocs, and make docs rule
* ignore emacs temp files
* Update .gitignore
* Update functions.php
* Update Makefile
* Update Creating-Documentation.md
* Fix some comment and documentation typos.
* Fix various entphysical page display issues.
- Resolve flickering during loading (missing liClosed for nested items).
- Clicking a sensor actually takes you to the matching graph now.
* Add a few nicecase() calls to clean up html page display.
* Create discover_entity_physical() function
- Add discover_entity_physical() function into includes/discovery/functions.inc.php
- This allows for an easy implementation of OS-specific entity-physical discovery.
- Update includes/discovery/entity-physical/entity-physical.inc.php to use the new function.
* Add power_consumed and power_factor sensors.
* Two new icons, make more entPhysical data visible.
* Pre-commit fix: blank line found at end of control structure.
* Add Schleifenbauer OS support.
* Now really fix the comment typo.
* Fix parsing mistakes.
* Add a generic count sensor.
* Make the Schleifenbauer discovery use count instead of state sensors.
* Don't place count sensor at the top, add sane limits for Schleifenbauer
* Finetuning the rrd_options, changing Schleifenbauer sensor names.
* Update schleifenbauer.svg
* optimize logo too
* add test data
* fix sensor value display (spaces break it)
* update entPhysicalIndex
* Add migrations and seeds
* Fix spacing validation issues
* Fix linting
* Update tabs to spaces
* Update daily and install process
* Make build-base.php use the new migrations if empty or at dbschema 1000.
Seed 1000 into the database.
Temp fix for the route table index length (this table basically isn't used...)
* Fix typo in seed.
Hard code legacy schema checks to version 1000 (999 would have worked as is)
* Port association table no longer exists
* Make database validate again
* DB schema, remove as many DB::statement as possible
* update migrations
add librenms cli entry point (artisan)
update validate to check laravel migrations
* remove statements from users migration
* Fix up daily.sh and the 1000 migration
* Update migrations to current state
Take advantage of environment variables to set DB credentials.
* Fix style issues
* Update schema
* fix test db collation
* Fix migration table definition
* update db migrations
* Update migrations
* Update stats callback. Just count the total migrations applied.
* Update 1000.sql.
* update migrations
* remove the graph type seeder, it is no longer needed
* update docs
* fix whitespace
* remove extra schema
* update tests
* fix sort
* add message
* dbSchema should actually be 1000
* add character set to db create
* Fix some artisan issues
* Update schema
Improves visual identification for sensors
- [x] Docs
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* Remove graph_types from DB.
This is silly since defining them in definitions.inc.php already does the same thing.
Adds missing ones in definitions.inc.php and rewrites others since I already wrote them before I realized they were duplicates.
* remove dead table
* Remove graph_types inserts from schema files.
* update db_schema.yaml
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
