* Added Fortigate state sensors
* Added snmprec file
* Update fortigate.json
* Fix "awesome" ifHighSpeed implementation...
* Update fortigate.json
* better MAX_INT ifHighSpeed fix
* update for new ifType changes
* ifDescr is not used correctly like most fortinets
* Adding ifType to base_oids
* Improve discovery (update ifType) and polling (save ifType)
* Updated test data
* Updated json test data
* vlan isn't filtered by default :P
* With default ignored ports
* Update newer test data
* Update to Added support for HeliOS 10Ghz failover to 5Ghz state sensor
Converted /includes/discovery/sensors/state/helios.inc.php to yaml
Test units included
CLA has been signed
* Added support for CeraOS TX Mute Status state sensor, NTP Client Lock Status state sensor.
Updated CeraOS temperature sensor, now called from includes/definitions/discovery/ceraos.yaml - removed includes/discovery/sensors/temperature/ceraos.inc.php
Corrected issue with CeraOS temperature reverting to zero after polling (added a trailing . to the num_oid)
Amended includes/definitions/discovery/helios.yaml with changes as advised by Neil Lathwood and Tony Murray
* Added unit test data and corrected ceraos.yaml validation error
* Added support for Ceraos Wireless Sensors (php)
Cross Polar Interference
Wireless Frequency
Added Ceraos state sensors (yaml)
NTP Client Lock Status
Tx Mute Status
Radio Operational Status
Remote Radio Operational Status
IDU Temperature
Power Amplifier Temperature
* Fix up tests, etc
* remove helios changes, fix style
Not sure about the warning or text.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
move customers table backend to Laravel
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* Use of dynamic_discovery_get_value in can_skip_sensor in order to use all available oids in skip_values
* Use LibreNMS\Device\YamlDiscovery code instead of keeping duplicated function can_skip_sensor
* Fix Travis errors
* Create audiocodes family with very basic sensors
* audiocode polling php and test files
* audiocode polling php and test files
* audiocode test files
* audiocode cleaning
* tests with selective polling disabled
* Added support for SAF CFM L4 wireless device
* Added copyright statement according to LibreNMS documentation
* Added snmp test data and excluded some discover modules from os definition
* Style issue fixed
* More descriptive function
* MIB file rename
* Rename MIB file and change other files accordingly
* Added test data
* Removed debug statement
* Last checks
* Style changes
* Style changes
* Style changes
* Style changes
* Code restructure to make it more readable
* Fixed error in foreach
* Style issues
* Formatting of states within Yaml changed to make it more readable
* Omit default arguments
* Better code and modules only in CFM-M4P-MUX
* Chaged cfml4 to cfm
* Update Sensor.php
* Update Sensor.php
* Better handling of scientific numbers
* Better handling of scientific numbers
* New test data
* Correction on handling trailing zeros
* Different way of cleaning the numbers based on Tony's input
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
Changed the Temperature High threshold for a HPE Comware Switch to the values provided by snmp.
This means the actual threshold configured in the switch is used over any predefined/auto calculated thresholds by LibreNMS.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* Fix issues cause by new location and other misc
fix some queries so we return devices with null locations
remove unnecessary query of all ports on ports page lists
make locations menu available to non-admins for the legacy menu
fix a few issues with the old network-map
* fix graphs
* fix oxidized query
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
This has been running in two production networks for > 3 months without any issues.
- Fix location so it is a regular database relation (this allows multiple devices to be accurately linked to one location and saves api calls)
- Parse coordinates from the location more consistently
- Add settings to webui
- ~~Used [PHP Geocoder](http://geocoder-php.org/), which has lots of backends and is well tested. (also includes reverse and geoip)~~
- Google Maps, Bing, Mapquest, and OpenStreetMap supported initially.
- Default to OpenStreetMap, which doesn't require a key. They will liberally hand out bans if you exceed 1 query per second though.
- All other Geocoding APIs require an API key. (Google requires a credit card on file, but seems to be the most accurate)
- Update all (I think) sql queries to handle the new structure
- Remove final vestiges of override_sysLocation as a device attribute
- Update existing device groups and rules in DB
- Tested all APIs with good/bad location, no/bad/good key, and no connection.
- Cannot fix advanced queries that use location
This blocks #8868
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* add the poller for portactivity
* add the ability to get monitor ports for portactivity
* add the graphs for displaying stuff for the portactivity app
* add the portactivity app page
* update the docs for Portactivity
* remove extra line
* minor doc update for Portactivity
* add update_application line
* convert to use json_app_get
* convert curly brackets to square
* style fix
* remote error, errorString, and version after they stop being important so they are not processed
* add alert rule examples
* add the poller for portactivity
* add the ability to get monitor ports for portactivity
* add the graphs for displaying stuff for the portactivity app
* add the portactivity app page
* update the docs for Portactivity
* remove extra line
* minor doc update for Portactivity
* add update_application line
* convert to use json_app_get
* convert curly brackets to square
* style fix
* remote error, errorString, and version after they stop being important so they are not processed
* add alert rule examples
* remove dump of get_portactivity_ports function added during rebase
* update to the current json_app_get
* add portactivity snmprec
* add the portactivity test data
* whoops bad merge when rebasing... fix
* minor formatting cleanup and add a missing comma
* fix some odditities with what one of the tests is doing
* whoops... include the use for the exception
* set the response to okay
* attempt to make snmpsim array check happy again
* the json now lints
* more making metric testing happy
* one more update to make travis-ci happy
* now flattens arrays also add array_flatten
* rename array_flatten to data_flatten as pre-commit chokes on it as laravel has something similarly named
* go through and properly add all the metrics
* tested with the newest one and it works
* whoops, clean up json and remove prototype that was used when putting it together
* doh! make it happy with laravel now
* see if a minor changing in formatting for the numbers makes the polling unit test happy
* order them properly
* remove a comma
* a few more minor fixes
* Added snmp_max_oid config at Os level.
* Added check for snmpv1 on multi_oid requests.
* Check device_oid_limit on multi get
* Use array_chunk
* Update snmp.inc.php
* remove dump, unused variable and extra plodes
* per device settings should take priority over OS
* Update Settings.md
* don't discard the data :P
* Add new sysDescr string for AlliedWare Plus products.
Release 5.4.8-2.1 of AlliedWare Plus will change the format of the
sysDescr string. This patch updates Allied Telesis yaml files to work with
this change.
Signed-off-by: Luuk Paulussen <luuk.paulussen@alliedtelesis.co.nz>
* save-test-data.php: Use correct variable for 'os' argument.
Signed-off-by: Luuk Paulussen <luuk.paulussen@alliedtelesis.co.nz>
* Create awplus_5.4.8-2.json
* Update awplus_5.4.8-2.json
* Check to see if a host exists in a lookup table to translate received name to what LibreNMS knows
* Added some documentation on how this is configured
* Use \LibreNMS\Config instead of accessing $config directly
* Fix codeclimate finding: Additional blank lines after USE statement
* murrant suggested a much cleaner way of doing this!
"1.3.6.1.4.1.207.1.4.128" is currently reporting as allied, when it should be reporting as radlan.
Refer to https://community.librenms.org/t/allied-telesis-discovery/6189/8
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
WebUI: added Traffic to the Windows OS overlib graph
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
Require it explicitly. Makes it easier to understand and matches the style of other values
Questionable YAML changes (either broken before or now broken):
secureplatform: haStatCode
ptp600: receiveModulationMode
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
