mirror of
https://github.com/librenms/librenms.git
synced 2024-09-21 18:38:25 +00:00
added new mib
git-svn-id: http://www.observium.org/svn/observer/trunk@364 61d68cd4-352d-0410-923a-c4978735b2b8
This commit is contained in:
Adam Amstrong
parent
c82a4439f7
commit
65fc0c97db
@ -50,6 +50,7 @@ NETSCREEN-ZONE-MIB NS-ZONE.mib
|
||||
MPLS-L3VPN-STD-MIB MPLS-L3VPN-STD-MIB.my
|
||||
CISCO-IETF-PW-MPLS-MIB CISCO-IETF-PW-MPLS-MIB.my
|
||||
CISCO-TCP-MIB CISCO-TCP-MIB.my
|
||||
CISCO-VLAN-MEMBERSHIP-MIB CISCO-VLAN-MEMBERSHIP-MIB.my
|
||||
FRAME-RELAY-DTE-MIB FRAME-RELAY-DTE-MIB
|
||||
NETSCREEN-SET-GEN-MIB NS-SET-GEN.mib
|
||||
NETSCREEN-SET-DNS-MIB NS-SET-DNS.mib
|
||||
|
||||
732
mibs/CISCO-VLAN-MEMBERSHIP-MIB.my
Normal file
732
mibs/CISCO-VLAN-MEMBERSHIP-MIB.my
Normal file
@ -0,0 +1,732 @@
|
||||
CISCO-VLAN-MEMBERSHIP-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
MODULE-IDENTITY, OBJECT-TYPE,
|
||||
NOTIFICATION-TYPE,
|
||||
Counter32, Integer32, IpAddress FROM SNMPv2-SMI
|
||||
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
||||
TEXTUAL-CONVENTION, RowStatus,
|
||||
TruthValue FROM SNMPv2-TC
|
||||
ifIndex FROM IF-MIB
|
||||
ciscoMgmt FROM CISCO-SMI;
|
||||
|
||||
ciscoVlanMembershipMIB MODULE-IDENTITY
|
||||
LAST-UPDATED "200101300000Z"
|
||||
ORGANIZATION "Cisco Systems Inc. "
|
||||
CONTACT-INFO
|
||||
"Cisco Systems
|
||||
Customer Service
|
||||
|
||||
Postal: 170 W Tasman Drive
|
||||
San Jose, CA 95134
|
||||
USA
|
||||
|
||||
Tel: +1 800 553-NETS
|
||||
|
||||
E-mail: cs-vlans@cisco.com"
|
||||
DESCRIPTION
|
||||
"The MIB module for the management of the
|
||||
VLAN Membership within the frame work of Cisco
|
||||
VLAN Architecture, v 2.0 by Keith McCloghrie. The MIB
|
||||
provides information on VLAN Membership Policy Servers
|
||||
used by a device and VLAN membership assignments of
|
||||
non-trunk bridge ports of the device."
|
||||
REVISION "200101300000Z"
|
||||
DESCRIPTION
|
||||
"Corrected description of vmVmpsReconfirmResult"
|
||||
REVISION "200001060000Z"
|
||||
DESCRIPTION
|
||||
"Added 4k VLAN support"
|
||||
REVISION "9901180000Z"
|
||||
DESCRIPTION
|
||||
"Add vmNotificationsEnabled.
|
||||
Add support for multi-vlan ports.
|
||||
Other minor edits."
|
||||
REVISION "9612060000Z"
|
||||
DESCRIPTION
|
||||
"Initial version of this MIB module."
|
||||
::= { ciscoMgmt 68 }
|
||||
|
||||
ciscoVlanMembershipMIBObjects
|
||||
OBJECT IDENTIFIER ::= { ciscoVlanMembershipMIB 1 }
|
||||
|
||||
-- Textual Conventions
|
||||
VlanIndex ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The (ISL) VLAN id of a VLAN which uniquely identifies
|
||||
a VLAN within a management domain.
|
||||
Implementations are allowed to restrict the range of
|
||||
VLANs."
|
||||
SYNTAX INTEGER(1..4095)
|
||||
|
||||
vmVmps OBJECT IDENTIFIER ::=
|
||||
{ ciscoVlanMembershipMIBObjects 1 }
|
||||
|
||||
vmMembership OBJECT IDENTIFIER ::=
|
||||
{ ciscoVlanMembershipMIBObjects 2 }
|
||||
|
||||
vmStatistics OBJECT IDENTIFIER ::=
|
||||
{ ciscoVlanMembershipMIBObjects 3 }
|
||||
|
||||
vmStatus OBJECT IDENTIFIER ::=
|
||||
{ ciscoVlanMembershipMIBObjects 4 }
|
||||
|
||||
-- General Info
|
||||
vmVmpsVQPVersion OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The VLAN Query Protocol (VQP) version supported on
|
||||
the device. VQP is the protocol used to query
|
||||
VLAN Membership Policy Server (VMPS) for VLAN
|
||||
membership assignments of dynamic VLAN ports.
|
||||
A VMPS provides VLAN membership policy
|
||||
assignments based on the content of the packets
|
||||
received on a port. "
|
||||
::= { vmVmps 1 }
|
||||
|
||||
vmVmpsRetries OBJECT-TYPE
|
||||
SYNTAX INTEGER(1..10)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The number of retries for VQP requests to a VMPS before
|
||||
using the next available VMPS."
|
||||
::= { vmVmps 2 }
|
||||
|
||||
vmVmpsReconfirmInterval OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..120)
|
||||
UNITS "Minutes"
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The switch will reconfirm membership of addresses on
|
||||
each port with VMPS periodically. This object specifies
|
||||
the interval to perform reconfirmation. If the value is
|
||||
set to 0, the switch does not reconfirm membership with
|
||||
VMPS."
|
||||
DEFVAL { 60 }
|
||||
::= { vmVmps 3 }
|
||||
|
||||
vmVmpsReconfirm OBJECT-TYPE
|
||||
SYNTAX INTEGER { ready(1), execute(2) }
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Setting this object to execute(2) causes the switch
|
||||
to reconfirm membership of every dynamic port.
|
||||
Reading this object always return ready(1)."
|
||||
::= { vmVmps 4 }
|
||||
|
||||
vmVmpsReconfirmResult OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
other(1),
|
||||
inProgress(2),
|
||||
success(3),
|
||||
noResponse(4),
|
||||
noVmps(5),
|
||||
noDynamicPort(6),
|
||||
noHostConnected(7)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object returns the result of the last request
|
||||
that sets vmVmpsReconfirm to execute(2). The
|
||||
semantics of the possible results are as follows:
|
||||
|
||||
other(1) - none of following
|
||||
inProgress(2) - reconfirm in progress
|
||||
success(3) - reconfirm completed successfully
|
||||
noResponse(4) - reconfirm failed because no
|
||||
VMPS responded
|
||||
noVmps(5) - No VMPS configured
|
||||
noDynamicPort(6) - No dynamic ports configured
|
||||
noHostConnected(7) - No hosts on dynamic ports
|
||||
"
|
||||
::= { vmVmps 5 }
|
||||
|
||||
vmVmpsCurrent OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This is the IpAddress of the current VMPS used."
|
||||
::= { vmVmps 6 }
|
||||
|
||||
vmVmpsTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF VmVmpsEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" A table of VMPS to use. The device will use
|
||||
the the primary VMPS by default. If the
|
||||
device is unable to reach the primary server
|
||||
after vmVmpsRetries retries, it uses the first
|
||||
secondary server in the table until it runs out
|
||||
of secondary servers, in which case it will return
|
||||
to using the primary server. Entries in this table
|
||||
may be created and deleted via this MIB or
|
||||
the management console on a device."
|
||||
::= { vmVmps 7 }
|
||||
|
||||
vmVmpsEntry OBJECT-TYPE
|
||||
SYNTAX VmVmpsEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" An entry (conceptual row) in the vmVmpsTable."
|
||||
INDEX { vmVmpsIpAddress }
|
||||
::= { vmVmpsTable 1 }
|
||||
|
||||
VmVmpsEntry ::= SEQUENCE {
|
||||
vmVmpsIpAddress IpAddress,
|
||||
vmVmpsPrimary TruthValue,
|
||||
vmVmpsRowStatus RowStatus
|
||||
}
|
||||
|
||||
vmVmpsIpAddress OBJECT-TYPE
|
||||
SYNTAX IpAddress
|
||||
-- MAX-ACCESS accessible-for-notify
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The Ip Address of the VMPS."
|
||||
::= { vmVmpsEntry 1 }
|
||||
|
||||
vmVmpsPrimary OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The status of the VMPS. Setting this value
|
||||
to true will make this VMPS the primary server
|
||||
and make the switch use this as the current server.
|
||||
Setting this entry to true causes other rows
|
||||
to transition to false. Attempting to write
|
||||
a value of false after creation will result in
|
||||
a return of bad value. Deleting an entry whose
|
||||
value is true will result in the first entry
|
||||
in the table being set to true."
|
||||
::= { vmVmpsEntry 2 }
|
||||
|
||||
vmVmpsRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The status of this conceptual row."
|
||||
::= { vmVmpsEntry 3 }
|
||||
|
||||
-- VLAN Membership Info
|
||||
vmMembershipSummaryTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF VmMembershipSummaryEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" A summary of VLAN membership of non-trunk
|
||||
bridge ports. This is a convenience table
|
||||
for retrieving VLAN membership information.
|
||||
|
||||
A row is created for a VLAN if:
|
||||
a) the VLAN exists, or
|
||||
b) a port is assigned to a non-existent VLAN.
|
||||
|
||||
VLAN membership can only be modified via the
|
||||
vmMembershipTable."
|
||||
::= { vmMembership 1 }
|
||||
|
||||
vmMembershipSummaryEntry OBJECT-TYPE
|
||||
SYNTAX VmMembershipSummaryEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" An entry (conceptual row) in the
|
||||
vmMembershipSummaryTable."
|
||||
INDEX { vmMembershipSummaryVlanIndex}
|
||||
::= { vmMembershipSummaryTable 1 }
|
||||
|
||||
VmMembershipSummaryEntry ::= SEQUENCE {
|
||||
vmMembershipSummaryVlanIndex VlanIndex,
|
||||
vmMembershipSummaryMemberPorts OCTET STRING
|
||||
}
|
||||
|
||||
vmMembershipSummaryVlanIndex OBJECT-TYPE
|
||||
SYNTAX VlanIndex
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The VLAN id of the VLAN."
|
||||
|
||||
::= { vmMembershipSummaryEntry 1 }
|
||||
|
||||
vmMembershipSummaryMemberPorts OBJECT-TYPE
|
||||
SYNTAX OCTET STRING( SIZE(0..128) )
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The set of the device's member ports that belong
|
||||
to the VLAN.
|
||||
|
||||
Each octet within the value of this object specifies a
|
||||
set of eight ports, with the first octet specifying ports
|
||||
1 through 8, the second octet specifying ports 9
|
||||
through 16, etc. Within each octet, the most
|
||||
significant bit represents the lowest numbered
|
||||
port, and the least significant bit represents the
|
||||
highest numbered port. Thus, each port of the
|
||||
VLAN is represented by a single bit within the
|
||||
value of this object. If that bit has a value of
|
||||
'1' then that port is included in the set of
|
||||
ports; the port is not included if its bit has a
|
||||
value of '0'.
|
||||
|
||||
A port number is the value of dot1dBasePort for
|
||||
the port in the BRIDGE-MIB (RFC 1493)."
|
||||
|
||||
::= { vmMembershipSummaryEntry 2 }
|
||||
|
||||
vmMembershipTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF VmMembershipEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" A table for configuring VLAN port membership.
|
||||
There is one row for each bridge port that is
|
||||
assigned to a static or dynamic access port. Trunk
|
||||
ports are not represented in this table. An entry
|
||||
may be created and deleted when ports are created or
|
||||
deleted via SNMP or the management console on a device."
|
||||
::= { vmMembership 2 }
|
||||
|
||||
vmMembershipEntry OBJECT-TYPE
|
||||
SYNTAX VmMembershipEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" An entry (conceptual row) in the vmMembershipTable."
|
||||
INDEX { ifIndex }
|
||||
::= { vmMembershipTable 1 }
|
||||
|
||||
VmMembershipEntry ::= SEQUENCE {
|
||||
vmVlanType INTEGER,
|
||||
vmVlan INTEGER,
|
||||
vmPortStatus INTEGER,
|
||||
vmVlans OCTET STRING,
|
||||
vmVlans2k OCTET STRING,
|
||||
vmVlans3k OCTET STRING,
|
||||
vmVlans4k OCTET STRING
|
||||
}
|
||||
|
||||
vmVlanType OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
static(1),
|
||||
dynamic(2),
|
||||
multiVlan(3)}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The type of VLAN membership assigned to this port.
|
||||
A port with static vlan membership is assigned to a
|
||||
single VLAN directly. A port with dynamic membership
|
||||
is assigned a single VLAN based on content of packets
|
||||
received on the port and via VQP queries to VMPS.
|
||||
A port with multiVlan membership may be assigned to
|
||||
one or more VLANs directly.
|
||||
|
||||
A static or dynamic port membership is specified
|
||||
by the value of vmVlan. A multiVlan port membership is
|
||||
specified by the value of vmVlans."
|
||||
::= { vmMembershipEntry 1 }
|
||||
|
||||
vmVlan OBJECT-TYPE
|
||||
SYNTAX INTEGER(0..4095)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The VLAN id of the VLAN the port is assigned to
|
||||
when vmVlanType is set to static or dynamic.
|
||||
This object is not instantiated if not applicable.
|
||||
|
||||
The value may be 0 if the port is not assigned
|
||||
to a VLAN.
|
||||
|
||||
If vmVlanType is static, the port is always
|
||||
assigned to a VLAN and the object may not be
|
||||
set to 0.
|
||||
|
||||
If vmVlanType is dynamic the object's value is
|
||||
0 if the port is currently not assigned to a VLAN.
|
||||
In addition, the object may be set to 0 only."
|
||||
::= { vmMembershipEntry 2 }
|
||||
|
||||
vmPortStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
inactive(1),
|
||||
active(2),
|
||||
shutdown(3) }
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" An indication of the current VLAN status of the port.
|
||||
A status of inactive(1) indicates that a dynamic port
|
||||
does not yet have a VLAN assigned, or a port is assigned
|
||||
to a VLAN that is currently not active. A status of
|
||||
active(2) indicates that the currently assigned
|
||||
VLAN is active. A status of shutdown(3) indicates
|
||||
that the port has been disabled as a result of VQP
|
||||
shutdown response."
|
||||
::= { vmMembershipEntry 3 }
|
||||
|
||||
vmVlans OBJECT-TYPE
|
||||
SYNTAX OCTET STRING(SIZE(0..128))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The VLAN(s) the port is assigned to when the
|
||||
port's vmVlanType is set to multiVlan.
|
||||
This object is not instantiated if not applicable.
|
||||
|
||||
The port is always assigned to one or more VLANs
|
||||
and the object may not be set so that there are
|
||||
no vlans assigned.
|
||||
|
||||
Each octet within the value of this object specifies a
|
||||
set of eight VLANs, with the first octet specifying
|
||||
VLAN id 1 through 8, the second octet specifying VLAN
|
||||
ids 9 through 16, etc. Within each octet, the most
|
||||
significant bit represents the lowest numbered
|
||||
VLAN id, and the least significant bit represents the
|
||||
highest numbered VLAN id. Thus, each VLAN of the
|
||||
port is represented by a single bit within the
|
||||
value of this object. If that bit has a value of
|
||||
'1' then that VLAN is included in the set of
|
||||
VLANs; the VLAN is not included if its bit has a
|
||||
value of '0'."
|
||||
::= { vmMembershipEntry 4 }
|
||||
|
||||
vmVlans2k OBJECT-TYPE
|
||||
SYNTAX OCTET STRING(SIZE(0..128))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The VLAN(s) the port is assigned to when the
|
||||
port's vmVlanType is set to multiVlan.
|
||||
This object is not instantiated if not applicable.
|
||||
|
||||
The port is always assigned to one or more VLANs
|
||||
and the object may not be set so that there are
|
||||
no vlans assigned.
|
||||
|
||||
Each octet within the value of this object specifies a
|
||||
set of eight VLANs, with the first octet specifying
|
||||
VLAN id 1024 through 1031, the second octet specifying VLAN
|
||||
ids 1032 through 1039, etc. Within each octet, the most
|
||||
significant bit represents the lowest numbered
|
||||
VLAN id, and the least significant bit represents the
|
||||
highest numbered VLAN id. Thus, each VLAN of the
|
||||
port is represented by a single bit within the
|
||||
value of this object. If that bit has a value of
|
||||
'1' then that VLAN is included in the set of
|
||||
VLANs; the VLAN is not included if its bit has a
|
||||
value of '0'."
|
||||
::= { vmMembershipEntry 5 }
|
||||
|
||||
vmVlans3k OBJECT-TYPE
|
||||
SYNTAX OCTET STRING(SIZE(0..128))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The VLAN(s) the port is assigned to when the
|
||||
port's vmVlanType is set to multiVlan.
|
||||
This object is not instantiated if not applicable.
|
||||
|
||||
The port is always assigned to one or more VLANs
|
||||
and the object may not be set so that there are
|
||||
no vlans assigned.
|
||||
|
||||
Each octet within the value of this object specifies a
|
||||
set of eight VLANs, with the first octet specifying
|
||||
VLAN id 2048 through 2055, the second octet specifying VLAN
|
||||
ids 2056 through 2063, etc. Within each octet, the most
|
||||
significant bit represents the lowest numbered
|
||||
VLAN id, and the least significant bit represents the
|
||||
highest numbered VLAN id. Thus, each VLAN of the
|
||||
port is represented by a single bit within the
|
||||
value of this object. If that bit has a value of
|
||||
'1' then that VLAN is included in the set of
|
||||
VLANs; the VLAN is not included if its bit has a
|
||||
value of '0'."
|
||||
::= { vmMembershipEntry 6 }
|
||||
|
||||
vmVlans4k OBJECT-TYPE
|
||||
SYNTAX OCTET STRING(SIZE(0..128))
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The VLAN(s) the port is assigned to when the
|
||||
port's vmVlanType is set to multiVlan.
|
||||
This object is not instantiated if not applicable.
|
||||
|
||||
The port is always assigned to one or more VLANs
|
||||
and the object may not be set so that there are
|
||||
no vlans assigned.
|
||||
|
||||
Each octet within the value of this object specifies a
|
||||
set of eight VLANs, with the first octet specifying
|
||||
VLAN id 3072 through 3079, the second octet specifying VLAN
|
||||
ids 3040 through 3047, etc. Within each octet, the most
|
||||
significant bit represents the lowest numbered
|
||||
VLAN id, and the least significant bit represents the
|
||||
highest numbered VLAN id. Thus, each VLAN of the
|
||||
port is represented by a single bit within the
|
||||
value of this object. If that bit has a value of
|
||||
'1' then that VLAN is included in the set of
|
||||
VLANs; the VLAN is not included if its bit has a
|
||||
value of '0'."
|
||||
::= { vmMembershipEntry 7 }
|
||||
|
||||
-- VQP Statistics
|
||||
vmVQPQueries OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The total number of VQP requests sent by this device to
|
||||
all VMPS since last system re-initialization."
|
||||
::= { vmStatistics 1 }
|
||||
|
||||
vmVQPResponses OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The number of VQP responses received by this device from
|
||||
all VMPS since last system re-initialization."
|
||||
::= { vmStatistics 2 }
|
||||
|
||||
vmVmpsChanges OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The number of times, since last system re-initialization,
|
||||
the current VMPS was changed. The current VMPS is changed
|
||||
whenever the VMPS fails to response after vmVmpsRetries of
|
||||
a VQP request."
|
||||
::= { vmStatistics 3 }
|
||||
|
||||
vmVQPShutdown OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The number of times, since last system re-initialization,
|
||||
a VQP response indicates 'shutdown'. A 'shutdown' response
|
||||
is a result of the membership policy configured at a VMPS
|
||||
by the administrator."
|
||||
::= { vmStatistics 4 }
|
||||
|
||||
vmVQPDenied OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The number of times, since last system re-initialization,
|
||||
a VQP response indicates 'denied'. A 'denied' response
|
||||
is a result of the membership policy configured at a VMPS
|
||||
by the administrator."
|
||||
::= { vmStatistics 5 }
|
||||
|
||||
vmVQPWrongDomain OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The number of times, since last system re-initialization,
|
||||
a VQP response indicates wrong management domain.
|
||||
A wrong management domain response indicates that the
|
||||
VMPS used serves a management domain that is different
|
||||
from the device's management domain."
|
||||
::= { vmStatistics 6 }
|
||||
|
||||
vmVQPWrongVersion OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The number of times, since last system re-initialization,
|
||||
a VQP response indicates wrong VQP version.
|
||||
A wrong VQP version response indicates that the VMPS
|
||||
used supports a VQP version that is different from
|
||||
the device's VQP version."
|
||||
::= { vmStatistics 7 }
|
||||
|
||||
vmInsufficientResources OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The number of times, since last system re-initialization,
|
||||
a VQP response indicates insufficient resources. An
|
||||
insufficient resources response indicates that the VMPS
|
||||
used does not have the required resources to verify the
|
||||
membership assignment requested."
|
||||
::= { vmStatistics 8 }
|
||||
|
||||
-- Status
|
||||
|
||||
vmNotificationsEnabled OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An indication of whether the notifications/traps
|
||||
defined in this MIB are enabled."
|
||||
::= { vmStatus 1 }
|
||||
|
||||
-- Notifications
|
||||
vmNotifications
|
||||
OBJECT IDENTIFIER ::= { ciscoVlanMembershipMIB 2 }
|
||||
|
||||
vmNotificationsPrefix
|
||||
OBJECT IDENTIFIER ::= { vmNotifications 0 }
|
||||
|
||||
vmVmpsChange NOTIFICATION-TYPE
|
||||
OBJECTS { vmVmpsIpAddress}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" A VMPS change notification is generated whenever
|
||||
vmVmpsChanges is incremented. The IP address
|
||||
of the new VMPS is sent."
|
||||
::= { vmNotificationsPrefix 1 }
|
||||
|
||||
-- Conformance
|
||||
|
||||
vmMIBConformance
|
||||
OBJECT IDENTIFIER ::= { ciscoVlanMembershipMIB 3 }
|
||||
|
||||
vmMIBCompliances
|
||||
OBJECT IDENTIFIER ::= { vmMIBConformance 1 }
|
||||
|
||||
vmMIBGroups
|
||||
OBJECT IDENTIFIER ::= { vmMIBConformance 2 }
|
||||
|
||||
vmMIBCompliance MODULE-COMPLIANCE
|
||||
STATUS obsolete -- superseded by vmMIBComplianceR2
|
||||
DESCRIPTION
|
||||
" The compliance statement for entities which
|
||||
implement the VLANs."
|
||||
MODULE
|
||||
MANDATORY-GROUPS { vmMembershipGroup }
|
||||
|
||||
GROUP vmVQPClientGroup
|
||||
DESCRIPTION
|
||||
" A VQP client must implement this group."
|
||||
|
||||
-- GROUP vmVQPNotificationsGroup
|
||||
-- DESCRIPTION
|
||||
-- " A VQP client must implement this group."
|
||||
::= { vmMIBCompliances 1 }
|
||||
|
||||
vmMIBCompliance2 MODULE-COMPLIANCE
|
||||
STATUS deprecated
|
||||
DESCRIPTION
|
||||
" The compliance statement for entities which
|
||||
implement the VLANs."
|
||||
MODULE
|
||||
MANDATORY-GROUPS { vmMembershipGroup2 }
|
||||
|
||||
GROUP vmVQPClientGroup
|
||||
DESCRIPTION
|
||||
" A VQP client must implement this group."
|
||||
|
||||
-- GROUP vmVQPNotificationsGroup
|
||||
-- DESCRIPTION
|
||||
-- " A VQP client must implement this group."
|
||||
::= { vmMIBCompliances 2 }
|
||||
|
||||
vmMIBCompliance3 MODULE-COMPLIANCE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The compliance statement for entities which
|
||||
implement the VLANs."
|
||||
MODULE
|
||||
MANDATORY-GROUPS { vmMembershipGroup2 }
|
||||
|
||||
GROUP vmVQPClientGroup
|
||||
DESCRIPTION
|
||||
" A VQP client must implement this group."
|
||||
|
||||
-- GROUP vmVQPNotificationsGroup
|
||||
-- DESCRIPTION
|
||||
-- " A VQP client must implement this group."
|
||||
|
||||
GROUP vm4kVlanGroup
|
||||
DESCRIPTION
|
||||
" This group must be implemented by the
|
||||
enitities which support the range of VlanIndex
|
||||
between 1024 and 4095."
|
||||
|
||||
::= { vmMIBCompliances 3 }
|
||||
|
||||
-- Units of Conformance
|
||||
|
||||
vmMembershipGroup OBJECT-GROUP
|
||||
OBJECTS { vmMembershipSummaryMemberPorts,
|
||||
vmVlan, vmVlanType, vmPortStatus }
|
||||
STATUS deprecated
|
||||
DESCRIPTION
|
||||
" A collection of objects for displaying and
|
||||
configuring VLAN membership."
|
||||
::= { vmMIBGroups 1 }
|
||||
|
||||
vmVQPClientGroup OBJECT-GROUP
|
||||
OBJECTS { vmVmpsVQPVersion, vmVmpsRetries, vmVmpsReconfirm,
|
||||
vmVmpsReconfirmInterval, vmVmpsReconfirmResult,
|
||||
vmVmpsCurrent, vmVmpsIpAddress, vmVmpsPrimary,
|
||||
vmVmpsRowStatus, vmVQPQueries, vmVQPResponses,
|
||||
vmVmpsChanges, vmVQPShutdown, vmVQPDenied,
|
||||
vmVQPWrongDomain, vmVQPWrongVersion,
|
||||
vmInsufficientResources }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" A collection of objects for the managing a VQP
|
||||
client."
|
||||
::= { vmMIBGroups 2 }
|
||||
|
||||
--vmVQPNotificationsGroup NOTIFICATION-GROUP
|
||||
-- NOTIFICATIONS { vmVmpsChange }
|
||||
-- STATUS current
|
||||
-- DESCRIPTION
|
||||
-- " The notification group for a VQP client. "
|
||||
-- ::= { vmMIBGroups 3 }
|
||||
|
||||
vmStatusGroup OBJECT-GROUP
|
||||
OBJECTS { vmNotificationsEnabled }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" A collection of objects for conveying general
|
||||
status information."
|
||||
::= { vmMIBGroups 4 }
|
||||
|
||||
vmMembershipGroup2 OBJECT-GROUP
|
||||
OBJECTS { vmMembershipSummaryMemberPorts,
|
||||
vmVlan, vmVlans, vmVlanType, vmPortStatus }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" A collection of objects for displaying and
|
||||
configuring VLAN membership."
|
||||
::= { vmMIBGroups 5 }
|
||||
|
||||
vm4kVlanGroup OBJECT-GROUP
|
||||
OBJECTS { vmVlans2k, vmVlans3k, vmVlans4k }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of objects providing information
|
||||
for VLANS with VlanIndex from 1024 to 4095."
|
||||
::= { vmMIBGroups 6 }
|
||||
|
||||
END
|
||||
Loading…
Reference in New Issue
Block a user