mirror of
https://github.com/librenms/librenms.git
synced 2024-09-29 22:36:40 +00:00
3332 lines
93 KiB
Plaintext
3332 lines
93 KiB
Plaintext
|
IRM3-MIB DEFINITIONS ::= BEGIN
|
||
|
|
||
|
-- irm3-mib.txt
|
||
|
-- Revision: 1.04.01
|
||
|
-- Part Number: 2170568-01
|
||
|
-- Date: June 20, 1996
|
||
|
|
||
|
-- Cabletron Systems, Inc.
|
||
|
-- 35 Industrial Way, P.O. Box 5005
|
||
|
-- Rochester, NH 03867-0505
|
||
|
-- (603) 332-9400
|
||
|
-- support@ctron.com
|
||
|
|
||
|
-- This module provides authoritative definitions for Cabletron's
|
||
|
-- repeater MIB for the IRM3.
|
||
|
--
|
||
|
-- This module will be extended, as required.
|
||
|
--
|
||
|
|
||
|
-- Cabletron Systems reserves the right to make changes in
|
||
|
-- specification and other information contained in this document
|
||
|
-- without prior notice. The reader should consult Cabletron Systems
|
||
|
-- to determine whether any such changes have been made.
|
||
|
--
|
||
|
-- In no event shall Cabletron Systems be liable for any incidental,
|
||
|
-- indirect, special, or consequential damages whatsoever (including
|
||
|
-- but not limited to lost profits) arising out of or related to this
|
||
|
-- document or the information contained in it, even if Cabletron
|
||
|
-- Systems has been advised of, known, or should have known, the
|
||
|
-- possibility of such damages.
|
||
|
--
|
||
|
-- Cabletron grants vendors, end-users, and other interested parties
|
||
|
-- a non-exclusive license to use this Specification in connection
|
||
|
-- with the management of Cabletron products.
|
||
|
|
||
|
-- Copyright August 94 Cabletron Systems
|
||
|
|
||
|
IMPORTS
|
||
|
NetworkAddress, Counter
|
||
|
FROM RFC1155-SMI
|
||
|
repeaterRev1, repeaterRev2, subSysMMAC
|
||
|
FROM IRM-OIDS
|
||
|
DisplayString
|
||
|
FROM RFC1213-MIB
|
||
|
OBJECT-TYPE FROM RFC-1212;
|
||
|
|
||
|
-- This MIB module uses the extended OBJECT-TYPE macro as defined in RFC 1212
|
||
|
|
||
|
-- Textual convention
|
||
|
|
||
|
-- DisplayString ::= OCTET STRING
|
||
|
-- This data type is used to model textual information taken from the NVT
|
||
|
-- ASCII character set. By convention, objects with this syntax, unless
|
||
|
-- explicitly stated, are declared as having:
|
||
|
--
|
||
|
-- SIZE (0..255)
|
||
|
|
||
|
-- MAC addresses will be represented in a canonical form.
|
||
|
|
||
|
|
||
|
|
||
|
-- Formal definitions for RepeaterRev1
|
||
|
|
||
|
device OBJECT IDENTIFIER ::= { repeaterRev1 1 }
|
||
|
|
||
|
board OBJECT IDENTIFIER ::= { repeaterRev1 2 }
|
||
|
|
||
|
port OBJECT IDENTIFIER ::= { repeaterRev1 3 }
|
||
|
|
||
|
sourceAddr OBJECT IDENTIFIER ::= { repeaterRev1 7 }
|
||
|
|
||
|
redundancy OBJECT IDENTIFIER ::= { repeaterRev1 8 }
|
||
|
|
||
|
alarm OBJECT IDENTIFIER ::= { repeaterRev1 9 }
|
||
|
|
||
|
|
||
|
-- Device Object Definitions
|
||
|
|
||
|
-- This section defines the objects under the Device node.
|
||
|
-- Again, there is only one instance of a Device object in any device.
|
||
|
|
||
|
|
||
|
deviceMMACType OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
unknown(1), -- none of the following
|
||
|
mMAC8(2),
|
||
|
mMAC5(3),
|
||
|
mMAC3(4),
|
||
|
mINIMMAC(5),
|
||
|
mRXI(6),
|
||
|
m3Shunt(7),
|
||
|
m5Shunt(8),
|
||
|
m8FNB(9),
|
||
|
nonFNB(10),
|
||
|
mMAC3Shunting(11),
|
||
|
mMAC5Shunting(12),
|
||
|
mMAC8Shunting(13),
|
||
|
m8Shunting(14)
|
||
|
}
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Indicates the type of MMAC."
|
||
|
::= { device 2 }
|
||
|
|
||
|
deviceSlots OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Number of available device slots in this device, including the
|
||
|
IRM slot."
|
||
|
::= { device 3 }
|
||
|
|
||
|
deviceOccupiedSlots OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The slots that contain MIM boards. This field is bit encoded (eg.
|
||
|
if a bit is set then that board is present). For example, a value
|
||
|
of 3 indicates that there are boards in the IRM slot and the first
|
||
|
MIM slot."
|
||
|
::= { device 4 }
|
||
|
|
||
|
devicePortsOn OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of operating ports on the device."
|
||
|
::= { device 5 }
|
||
|
|
||
|
deviceTotalPorts OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The total number of repeater ports on the MMAC."
|
||
|
::= { device 6 }
|
||
|
|
||
|
deviceTotalPkts OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of packets detected on all ports of this device."
|
||
|
::= { device 7}
|
||
|
|
||
|
deviceTotalErrors OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The sum of all of the errors listed including alignment, CRC, runts,
|
||
|
giants, and out of window collisions."
|
||
|
::= { device 8 }
|
||
|
|
||
|
deviceTransmitColls OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of transmit collisions detected by this MMAC."
|
||
|
::= { device 9 }
|
||
|
|
||
|
deviceRecColls OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of receive collisions detected by this MMAC."
|
||
|
::= { device 10 }
|
||
|
|
||
|
deviceAlignErrs OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of packets with alignment errors detected."
|
||
|
::= { device 11 }
|
||
|
|
||
|
deviceCRCErrs OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of packets with bad CRC detected."
|
||
|
::= { device 12 }
|
||
|
|
||
|
deviceRunts OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of runt frames detected by this device."
|
||
|
::= { device 13 }
|
||
|
|
||
|
deviceOOWColls OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of out-of-window collisions detected by this device."
|
||
|
::= { device 14 }
|
||
|
|
||
|
deviceNoResources OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of No resource condtions detected by this device."
|
||
|
::= { device 15 }
|
||
|
|
||
|
deviceRecBytes OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of bytes detected on the network."
|
||
|
::= { device 16 }
|
||
|
|
||
|
deviceGiantFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of packets longer than 1518 bytes."
|
||
|
::= { device 17 }
|
||
|
|
||
|
deviceRestart OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"If this object is set to 1 the device is restarted."
|
||
|
::= { device 18 }
|
||
|
|
||
|
deviceResetCounters OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"If this object is set to 1, all of the devices counters are reset
|
||
|
to 0."
|
||
|
::= { device 19 }
|
||
|
|
||
|
deviceRedundantCts OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of redundant circuits available for use."
|
||
|
::= { device 20 }
|
||
|
|
||
|
deviceDiscover OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS deprecated
|
||
|
DESCRIPTION
|
||
|
"When this variable is set to 1 The following events occur:
|
||
|
(1) The device sends a LINK-UP trap
|
||
|
(2) The device sends a proprietary packet that will
|
||
|
cause all other Cabeltron devices on that local
|
||
|
network to send a LINK-UP trap."
|
||
|
::= { device 21 }
|
||
|
|
||
|
deviceTimeBase OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of seconds used as the interval for performing all of
|
||
|
the rate alarm checks. The minimum is 10 secs."
|
||
|
::= { device 24 }
|
||
|
|
||
|
deviceResetRedundancy OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Setting this object to a 1 will reset redundancy for the entire box."
|
||
|
::= { device 25 }
|
||
|
|
||
|
deviceSrcAddrAgingTime OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of minutes that a source address is not detected before it
|
||
|
is removed from the source address table."
|
||
|
::= { device 26 }
|
||
|
|
||
|
deviceSrcAddrTraps OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
trapsOff(1),
|
||
|
trapsOn(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Controls sending of source address related traps."
|
||
|
::= { device 27 }
|
||
|
|
||
|
deviceSrcAddrLocked OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
lockOff(1),
|
||
|
lockOn(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"If this is set to 2, any source addresses that are detected on
|
||
|
station ports that are not in the table will cause the port to
|
||
|
be turned off."
|
||
|
::= { device 28 }
|
||
|
|
||
|
deviceEtherOccupiedSlots OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The slots that contain Ethernet MIM boards. This field
|
||
|
is bit encoded (eg. if a bit is set then that board is present).
|
||
|
For example, a value of 2 indicates that there is an Ethernet board
|
||
|
in the first MIM slot."
|
||
|
::= { device 29 }
|
||
|
|
||
|
deviceTROccupiedSlots OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The slots that contain managable Token Ring MIM boards. This
|
||
|
field is bit encoded (eg. if a bit is set then that board is
|
||
|
present). For example, a value of 2 indicates that there is a
|
||
|
managable Token Ring board in the first MIM slot."
|
||
|
::= { device 30 }
|
||
|
|
||
|
deviceFDDIOccupiedSlots OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The slots that contain FDDI MIM boards. This field is bit encoded
|
||
|
(eg. if a bit is set then that board is present). For example, a
|
||
|
value of 2 indicates that there is an FDDI board in the first MIM
|
||
|
slot."
|
||
|
::= { device 31 }
|
||
|
|
||
|
deviceRestoreDefaults OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"If this object is set to 1 the factory defaults are restored. This,
|
||
|
however, does not affect the device's IP address."
|
||
|
::= { device 32 }
|
||
|
|
||
|
deviceActiveUsers OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of active users seen by this device."
|
||
|
::= { device 33 }
|
||
|
|
||
|
deviceOSIFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with OSI protocol seen by this device."
|
||
|
::= { device 34 }
|
||
|
|
||
|
deviceNovellFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with NOVELL protocol seen by this device."
|
||
|
::= { device 35 }
|
||
|
|
||
|
deviceBanyanFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with BANYAN protocol seen by this device."
|
||
|
::= { device 36 }
|
||
|
|
||
|
deviceDECNetFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with DECNET protocol seen by this device."
|
||
|
::= { device 37 }
|
||
|
|
||
|
deviceXNSFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with XNS protocol seen by this device."
|
||
|
::= { device 38 }
|
||
|
|
||
|
deviceIPFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with TCPIP protocol seen by this device."
|
||
|
::= { device 39 }
|
||
|
|
||
|
deviceCtronFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with Cabletron protocol seen by this device."
|
||
|
::= { device 40 }
|
||
|
|
||
|
deviceAppletalkFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with Appletalk protocol seen by this device."
|
||
|
::= { device 41 }
|
||
|
|
||
|
deviceOtherFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this device, that do not fall into
|
||
|
any of the previously listed protocol catagories."
|
||
|
::= { device 42 }
|
||
|
|
||
|
device64To127Frames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this device, with frame sizes between
|
||
|
64 and 127 bytes."
|
||
|
::= { device 43 }
|
||
|
|
||
|
device128To255Frames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this device, with frame sizes between
|
||
|
128 and 255 bytes."
|
||
|
::= { device 44 }
|
||
|
|
||
|
device256To511Frames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this device, with frame sizes between
|
||
|
256 and 511 bytes."
|
||
|
::= { device 45 }
|
||
|
|
||
|
device512To1023Frames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this device, with frame sizes between
|
||
|
512 and 1023 bytes."
|
||
|
::= { device 46 }
|
||
|
|
||
|
device1024To1518Frames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this device, with frame sizes between
|
||
|
1024 and 1518 bytes."
|
||
|
::= { device 47 }
|
||
|
|
||
|
deviceBroadPkts OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The sum of broadcast packets detected on all ports of this device."
|
||
|
::= { device 48}
|
||
|
|
||
|
deviceMultPkts OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The sum of multicast packets detected on all ports of this device."
|
||
|
::= { device 49}
|
||
|
|
||
|
deviceThdPartyOccupiedSlots OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The slots that contain Third Party MIM boards. This field
|
||
|
is bit encoded (eg. if a bit is set then that board is present).
|
||
|
For example, a value of 2 indicates that there is a Third Party
|
||
|
board in the first MIM slot."
|
||
|
::= { device 51 }
|
||
|
|
||
|
deviceImimOccupiedSlots OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The slots that contain Cabletron Intelligent MIM boards. This field
|
||
|
is bit encoded (eg. if a bit is set then that board is present).
|
||
|
For example, a value of 2 indicates that there is an Intelligent board
|
||
|
in the first MIM slot."
|
||
|
::= { device 52 }
|
||
|
|
||
|
deviceLinkTraps OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
trapsOff(1),
|
||
|
trapsOn(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Controls sending of link related traps."
|
||
|
::= { device 54 }
|
||
|
|
||
|
|
||
|
ctIPDefaultFrameType OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
ethernet(1),
|
||
|
snap8022(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Defines the default frame type that will be used by the
|
||
|
device. A device will understand both frame types and will
|
||
|
respond based upon the framing type that is learned for
|
||
|
the given address. This object defines the type of framing
|
||
|
that will be used if no framing is known, for example ARP
|
||
|
requests.
|
||
|
|
||
|
Setting a value of 8022snap(2) will result in framing
|
||
|
802.3 - 802.2 - IP packets being generated by default.
|
||
|
|
||
|
Setting a value of ethernet(1) will result in framing
|
||
|
ethernet IP packets by default."
|
||
|
DEFVAL { ethernet }
|
||
|
::= { device 56 }
|
||
|
deviceSrcAddrType OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
ipHash(1),
|
||
|
decHash(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
" Selects the hashing algorithm of source addresses, DEC or IP"
|
||
|
DEFVAL{ ipHash }
|
||
|
::= { device 57 }
|
||
|
-- 1.3.6.1.4.1.52.1.2.1.1.57
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- SourceAddr object definitions
|
||
|
-- The SourceAddr object section contains objects that can be accessed by
|
||
|
-- source address. The table index for these objects is the
|
||
|
-- source address of interest. Each octet within the source address forms
|
||
|
-- a separate sub-identifier.
|
||
|
|
||
|
sourceAddrBoard OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The board number of the port that the supplied source address has
|
||
|
been found on."
|
||
|
::= { sourceAddr 1 }
|
||
|
|
||
|
sourceAddrPort OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The port number of the port that the supplied source address has
|
||
|
been found on."
|
||
|
::= { sourceAddr 2 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
|
||
|
-- Redundancy Object Definitions
|
||
|
-- This section defines the objects that are associated with cable level
|
||
|
-- redundancy. The concepts for this are described in other documentation.
|
||
|
-- There are two types of instance identifiers for redundancy objects.
|
||
|
|
||
|
|
||
|
redundancyPollInterval OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of seconds between polls for redundancy."
|
||
|
::= { redundancy 1 }
|
||
|
|
||
|
redundancyTestTod OBJECT-TYPE
|
||
|
SYNTAX OCTET STRING
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The time of day at which the redundant circuits should be tested."
|
||
|
::= { redundancy 2 }
|
||
|
|
||
|
redundancyPerformTest OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
performTest(1)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Test the redundant circuit."
|
||
|
::= { redundancy 3 }
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- The index for this table is circuitNum, which is of type INTEGER.
|
||
|
|
||
|
redundancyCircuitName OBJECT-TYPE
|
||
|
SYNTAX OCTET STRING
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The name of the indicated circuit."
|
||
|
::= { redundancy 4 }
|
||
|
|
||
|
redundancyRetryCount OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of unanswered polls allowed for the indicated circuit
|
||
|
before the current connection is declared bad."
|
||
|
::= { redundancy 5 }
|
||
|
|
||
|
redundancyNumBPs OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of board/port combinations associated with the indicated
|
||
|
circuit."
|
||
|
::= { redundancy 6 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by circuitNum and circuitBPIndex
|
||
|
|
||
|
redundancyCircuitBoard OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The boards associated with the indicated circuit."
|
||
|
::= { redundancy 7 }
|
||
|
|
||
|
redundancyCircuitPort OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The ports associated with the indicated circuit."
|
||
|
::= { redundancy 8 }
|
||
|
|
||
|
redundancyCircuitTypes OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The type of each port associated with the indicated circuit."
|
||
|
::= { redundancy 9 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by circuitNum
|
||
|
|
||
|
redundancyCircuitNumAddr OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of addresses associated with the indicated circuit."
|
||
|
::= { redundancy 10 }
|
||
|
|
||
|
redundancyCircuitMACAddrAdd OBJECT-TYPE
|
||
|
SYNTAX NetworkAddress
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Adds this ethernet address to the polling list for the indicated
|
||
|
circuit."
|
||
|
::= { redundancy 11 }
|
||
|
|
||
|
redundancyCircuitMACAddrDel OBJECT-TYPE
|
||
|
SYNTAX NetworkAddress
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Removes this ethernet address from the polling list for the
|
||
|
indicated circuit."
|
||
|
::= { redundancy 12 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by circuitNum and circuitBPIndex
|
||
|
|
||
|
redundancyCircuitMACAddrDisp OBJECT-TYPE
|
||
|
SYNTAX NetworkAddress
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The ethernet addresses associated with the indicated circuit,
|
||
|
accessed by index."
|
||
|
::= { redundancy 13 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by circuitNum
|
||
|
|
||
|
redundancyCircuitEnable OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
disable(1),
|
||
|
enable(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Enables and disables the indicated circuit."
|
||
|
::= { redundancy 14 }
|
||
|
|
||
|
redundancyCircuitReset OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
reset(1)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Reset the indicated circuit. Return all of the associated board
|
||
|
and ports to NOT-USED, remove associated addresses from the polling
|
||
|
list, reset the circuit name and retry count to default values."
|
||
|
::= { redundancy 15 }
|
||
|
|
||
|
|
||
|
-- ALARM Object definitions
|
||
|
|
||
|
-- This section defines the objects that can cause alarms to be generated.
|
||
|
|
||
|
-- For each section there are 3 sources of alarms:
|
||
|
-- Traffic levels,
|
||
|
-- collision rates (as they relate to traffic), and
|
||
|
-- error rates (also related to traffic).
|
||
|
|
||
|
-- All alarms are qualified by the Devicetimebase (ie. the rates are measured
|
||
|
-- for a particular length of time).
|
||
|
|
||
|
-- Formal definitions for the structure below ALARM are:
|
||
|
|
||
|
|
||
|
devAlrm OBJECT IDENTIFIER ::= { alarm 1 }
|
||
|
|
||
|
bdAlrm OBJECT IDENTIFIER ::= { alarm 2 }
|
||
|
|
||
|
portAlrm OBJECT IDENTIFIER ::= { alarm 3 }
|
||
|
|
||
|
|
||
|
-- DevAlrm object defintions
|
||
|
-- This section defines the objects that will control alarms associated with
|
||
|
-- the device.
|
||
|
|
||
|
|
||
|
-- Formal definitions below DevAlrm
|
||
|
|
||
|
devTraffic OBJECT IDENTIFIER ::= { devAlrm 1 }
|
||
|
|
||
|
devColls OBJECT IDENTIFIER ::= { devAlrm 2 }
|
||
|
|
||
|
devError OBJECT IDENTIFIER ::= { devAlrm 3 }
|
||
|
|
||
|
devBroad OBJECT IDENTIFIER ::= { devAlrm 4 }
|
||
|
|
||
|
-- DevTraffic Object Definitions
|
||
|
-- This section defines the DevTraffic objects. These objects control the
|
||
|
-- device level traffic alarm generation.
|
||
|
|
||
|
|
||
|
devTrafficEnable OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
disable(1),
|
||
|
enable(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Enable the sending of device level traffic traps."
|
||
|
::= { devTraffic 1 }
|
||
|
|
||
|
devTrafficThreshold OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The threshold of packets within the Devicetimebase that will cause
|
||
|
a traffic alarm."
|
||
|
::= { devTraffic 2 }
|
||
|
|
||
|
|
||
|
-- DevColls Object Defintions
|
||
|
-- This section defines the objects that control the device level collision
|
||
|
-- alarm.
|
||
|
|
||
|
|
||
|
devCollsEnable OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
disable(1),
|
||
|
enable(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Enable the sending of device level collision alarms."
|
||
|
::= { devColls 1 }
|
||
|
|
||
|
devCollsThreshold OBJECT-TYPE
|
||
|
SYNTAX INTEGER (1..15)
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This object represents the number of collisions per good packet
|
||
|
measured by the device that will generate an alarm."
|
||
|
::= { devColls 2 }
|
||
|
|
||
|
|
||
|
-- DevErrorS Object Defintions
|
||
|
-- This section defines the objects that control the device level error alarm.
|
||
|
|
||
|
|
||
|
devErrorEnable OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
disable(1),
|
||
|
enable(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Enable the sending of device level error alarms."
|
||
|
::= { devError 1 }
|
||
|
|
||
|
devErrorThreshold OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This object represents the percentage of errors per good packet that
|
||
|
will generate an alarm."
|
||
|
::= { devError 2 }
|
||
|
|
||
|
devErrorSource OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The type of error used for the error alarm.
|
||
|
|
||
|
The integer is a bit encoded version of which errors to include
|
||
|
in the error sum. The bits are encoded as follows:
|
||
|
|
||
|
CRCErrors - Bit 0 - Least Significant Bit
|
||
|
runts - Bit 1
|
||
|
OOWColls - Bit 2
|
||
|
alignErrs - Bit 3
|
||
|
NoResource - Bit 4
|
||
|
Giants - Bit 5
|
||
|
"
|
||
|
::= { devError 3 }
|
||
|
|
||
|
|
||
|
|
||
|
-- DevBroad Object Defintions
|
||
|
-- This section defines the objects that control the device level broadcast
|
||
|
-- alarm.
|
||
|
|
||
|
devBroadEnable OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
disable(1),
|
||
|
enable(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Enable the sending of device level broadcast traps."
|
||
|
::= { devBroad 1 }
|
||
|
|
||
|
devBroadThreshold OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The threshold of broadcast packets within the Devicetimebase
|
||
|
that will cause a broadcast alarm."
|
||
|
::= { devBroad 2 }
|
||
|
|
||
|
|
||
|
-- BdAlrm object definitions
|
||
|
-- This section defines the objects that will control alarms associated with
|
||
|
-- the board.
|
||
|
|
||
|
-- Formal definitions below BdAlrm
|
||
|
|
||
|
bdTraffic OBJECT IDENTIFIER ::= { bdAlrm 1 }
|
||
|
|
||
|
bdColls OBJECT IDENTIFIER ::= { bdAlrm 2 }
|
||
|
|
||
|
bdError OBJECT IDENTIFIER ::= { bdAlrm 3 }
|
||
|
|
||
|
bdBroad OBJECT IDENTIFIER ::= { bdAlrm 4 }
|
||
|
|
||
|
-- BdTraffic Object Definitions
|
||
|
-- This section defines the BdTraffic objects.
|
||
|
-- These objects control the board level traffic alarm generation.
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardNum, which is an INTEGER
|
||
|
|
||
|
bdTrafficEnable OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
disable(1),
|
||
|
enable(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Enable the sending of board level traffic traps for this board."
|
||
|
::= { bdTraffic 1 }
|
||
|
|
||
|
bdTrafficThreshold OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The threshold of packets within the Devicetimebase that will cause
|
||
|
a traffic alarm."
|
||
|
::= { bdTraffic 2 }
|
||
|
|
||
|
bdTrafficBdDisable OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
disable(1), -- Do NOT disable board
|
||
|
enable (2) -- Allow for disabling of board
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Permit a board to be disabled on a traffic threshold alarm."
|
||
|
::= { bdTraffic 3 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
|
||
|
-- BdColls Object Defintions
|
||
|
-- This section defines the objects that control the board level collision
|
||
|
-- alarm.
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardNum, which is an INTEGER
|
||
|
|
||
|
bdCollsEnable OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
disable(1),
|
||
|
enable(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Enable the sending of board level collision alarms."
|
||
|
::= { bdColls 1 }
|
||
|
|
||
|
bdCollsThreshold OBJECT-TYPE
|
||
|
SYNTAX INTEGER (1..15)
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This object represents the number of collisions per good packet
|
||
|
measured by the board that will generate an alarm."
|
||
|
::= { bdColls 2 }
|
||
|
|
||
|
bdCollsBdDisable OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
disable(1), -- Do NOT disable board
|
||
|
enable (2) -- Allow for disabling of board
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Permit a board to be disabled on a collision threshold alarm."
|
||
|
::= { bdColls 3 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
|
||
|
-- BdErrors Object Defintions
|
||
|
-- This section defines the objects that control the board level error alarm.
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardNum, which is an INTEGER
|
||
|
|
||
|
bdErrorEnable OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
disable(1),
|
||
|
enable(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Enable the sending of board level error alarms."
|
||
|
::= { bdError 1 }
|
||
|
|
||
|
bdErrorThreshold OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This object represents the percentage of errors per good packet
|
||
|
that will generate an alarm."
|
||
|
::= { bdError 2 }
|
||
|
|
||
|
bdErrorSource OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The type of error used for the error alarm.
|
||
|
|
||
|
The integer is a bit encoded version of which errors to include
|
||
|
in the error sum. The bits are encoded as follows:
|
||
|
|
||
|
CRCErrors - Bit 0 Least Significant Bit
|
||
|
runts - Bit 1
|
||
|
OOWColls - Bit 2
|
||
|
alignErrs - Bit 3
|
||
|
NoResource - Bit 4
|
||
|
Giants - Bit 5
|
||
|
"
|
||
|
::= { bdError 3 }
|
||
|
|
||
|
bdErrorBdDisable OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
disable(1), -- Do NOT disable board
|
||
|
enable (2) -- Allow for disabling of board
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Permit a board to be disabled on an error threshold alarm."
|
||
|
::= { bdError 4 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
|
||
|
-- BdBroad Object Definitions
|
||
|
-- This section defines the BdBroadcast objects.
|
||
|
-- These objects control the board level broadcast alarm generation.
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardNum, which is an INTEGER
|
||
|
|
||
|
bdBroadEnable OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
disable(1),
|
||
|
enable(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Enable the sending of board level broadcast traps for this board."
|
||
|
::= { bdBroad 1 }
|
||
|
|
||
|
bdBroadThreshold OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The threshold of broadcast packets within the Devicetimebase
|
||
|
that will cause a broadcast alarm."
|
||
|
::= { bdBroad 2 }
|
||
|
|
||
|
bdBroadDisable OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
disable(1), -- Do NOT disable board
|
||
|
enable (2) -- Allow for disabling of board
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Permit a board to be disabled on a broadcast threshold alarm."
|
||
|
::= { bdBroad 3 }
|
||
|
|
||
|
|
||
|
-- PortAlrm object definitions
|
||
|
-- This section defines the objects that will control alarms associated with
|
||
|
-- the port.
|
||
|
|
||
|
-- PortAlrm Instance Identifiers
|
||
|
|
||
|
-- There is set of port level alarms per board thus the instance identifiers
|
||
|
-- for PortAlrm objects is the board number.
|
||
|
|
||
|
-- Formal defintions below PortAlrm
|
||
|
|
||
|
portTraffic OBJECT IDENTIFIER ::= { portAlrm 1 }
|
||
|
|
||
|
portColls OBJECT IDENTIFIER ::= { portAlrm 2 }
|
||
|
|
||
|
portError OBJECT IDENTIFIER ::= { portAlrm 3 }
|
||
|
|
||
|
portBroad OBJECT IDENTIFIER ::= { portAlrm 4 }
|
||
|
|
||
|
-- PortTraffic Object Definitions
|
||
|
-- This section defines the PortTraffic objects.
|
||
|
-- These objects control the port level traffic alarm generation.
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardNum, which is an INTEGER
|
||
|
|
||
|
portTrafficEnable OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
disable(1),
|
||
|
enable(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Enable the sending of port level traffic traps for this port."
|
||
|
::= { portTraffic 1 }
|
||
|
|
||
|
portTrafficThreshold OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The threshold of packets within the Devicetimebase that will cause
|
||
|
a traffic alarm."
|
||
|
::= { portTraffic 2 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardNum and portNum, both of which are INTEGERs
|
||
|
|
||
|
portTrafficPortDisable OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
disable(1), -- Do NOT disable port
|
||
|
enable (2) -- Allow for disabling of port
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Permit a port to be disabled on a traffic threshold alarm."
|
||
|
::= { portTraffic 3 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
|
||
|
-- PortColls Object Definitions
|
||
|
-- This section defines the objects that control the port level collision
|
||
|
-- alarm.
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardNum, which is an INTEGER
|
||
|
|
||
|
portCollsEnable OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
disable(1),
|
||
|
enable(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Enable the sending of port level collsion alarms."
|
||
|
::= { portColls 1 }
|
||
|
|
||
|
portCollsThreshold OBJECT-TYPE
|
||
|
SYNTAX INTEGER (1..15)
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This object represents the number of collisions per good packet
|
||
|
measured by the port that will generate an alarm."
|
||
|
::= { portColls 2 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardNum and portNum, both INTEGERs
|
||
|
|
||
|
portCollsPortDisable OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
disable(1), -- Do NOT disable port
|
||
|
enable (2) -- Allow for disabling of port
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Permit a port to be disabled on a collision threshold alarm."
|
||
|
::= { portColls 3 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
|
||
|
-- PortErrors Object Defintions
|
||
|
-- This section defines the objects that control the port level error alarm.
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardNum, an INTEGER
|
||
|
|
||
|
portErrorEnable OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
disable(1),
|
||
|
enable(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Enable the sending of port level error alarms."
|
||
|
::= { portError 1 }
|
||
|
|
||
|
portErrorThreshold OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This object represents the percentage of errors per good packet
|
||
|
that will generate an alarm."
|
||
|
::= { portError 2 }
|
||
|
|
||
|
portErrorSource OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The type of error used for the error alarm.
|
||
|
|
||
|
The integer is a bit encoded version of which errors to include
|
||
|
in the error sum. The bits are encoded as follows:
|
||
|
|
||
|
CRCErrors - Bit 0 - Least Significant Bit
|
||
|
runts - Bit 1
|
||
|
OOWColls - Bit 2
|
||
|
alignErrs - Bit 3
|
||
|
NoResource - Bit 4
|
||
|
Giants - Bit 5
|
||
|
"
|
||
|
::= { portError 3 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardNum and portNum, both INTEGERs
|
||
|
|
||
|
portErrorPortDisable OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
disable(1), -- Do NOT disable port
|
||
|
enable (2) -- Allow for disabling of port
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Permit a port to be disabled on an error threshold alarm."
|
||
|
::= { portError 4 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
|
||
|
-- PortBroad Object Definitions
|
||
|
-- This section defines the PortBroadcast objects.
|
||
|
-- These objects control the port level broadcast alarm generation.
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardNum, an INTEGER
|
||
|
|
||
|
portBroadEnable OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
disable(1),
|
||
|
enable(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Enable the sending of port level broadcast alarms."
|
||
|
::= { portBroad 1 }
|
||
|
|
||
|
portBroadThreshold OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The threshold of broadcast packets within the Devicetimebase that
|
||
|
will cause a broadcast alarm."
|
||
|
::= { portBroad 2 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardNum and portNum, both INTEGERs
|
||
|
|
||
|
portBroadDisable OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
disable(1), -- Do NOT disable port
|
||
|
enable (2) -- Allow for disabling of port
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Permit a port to be disabled on a broadcast threshold alarm."
|
||
|
::= { portBroad 3 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
|
||
|
-- RepeaterRev2 Formal declarations
|
||
|
|
||
|
deviceR2 OBJECT IDENTIFIER ::= { repeaterRev2 1}
|
||
|
|
||
|
networkR2 OBJECT IDENTIFIER ::= { repeaterRev2 2}
|
||
|
|
||
|
boardR2 OBJECT IDENTIFIER ::= { repeaterRev2 3}
|
||
|
|
||
|
portR2 OBJECT IDENTIFIER ::= { repeaterRev2 4}
|
||
|
|
||
|
|
||
|
-- Token Ring Device object definitions
|
||
|
-- This sections defines the objects associated with Token Ring on the
|
||
|
-- device.
|
||
|
-- The instance ID for these objects are all zero.
|
||
|
|
||
|
|
||
|
tokenRingD OBJECT IDENTIFIER ::= { deviceR2 3 }
|
||
|
|
||
|
deviceTRPortsOn OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This gives the number of Token Ring ports enabled on this device."
|
||
|
::= { tokenRingD 1 }
|
||
|
|
||
|
deviceTRPorts OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This gives the total number of Token Ring ports on this device."
|
||
|
::= { tokenRingD 2 }
|
||
|
|
||
|
deviceTRRingPortsOn OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This gives the number of Token Ring ring ports that are enabled."
|
||
|
::= { tokenRingD 3 }
|
||
|
|
||
|
deviceTRRingPorts OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This gives the total number of Token Ring ring ports on this device."
|
||
|
::= { tokenRingD 4 }
|
||
|
|
||
|
deviceTRLans OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This gives the number of Token Rings formed on this device."
|
||
|
::= { tokenRingD 5 }
|
||
|
|
||
|
deviceTRBoards OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This returns the number of Token Ring boards on the device."
|
||
|
::= { tokenRingD 6 }
|
||
|
|
||
|
deviceTRBoardMap OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The slots that contain Token Ring MIM boards. This field is bit
|
||
|
encoded (eg. if a bit is set then that board is present). For
|
||
|
example, a value of 2 indicates that there is a Token Ring board
|
||
|
in the first MIM slot."
|
||
|
::= { tokenRingD 7 }
|
||
|
|
||
|
|
||
|
|
||
|
-- Board Object Definitions
|
||
|
-- This section will describe the management objects associated with a board.
|
||
|
|
||
|
|
||
|
-- Formal Definitions within Board
|
||
|
|
||
|
commonB OBJECT IDENTIFIER ::= { boardR2 1}
|
||
|
|
||
|
ethernetB OBJECT IDENTIFIER ::= { boardR2 2}
|
||
|
|
||
|
tokenRingB OBJECT IDENTIFIER ::= { boardR2 3}
|
||
|
|
||
|
fDDIB OBJECT IDENTIFIER ::= { boardR2 4}
|
||
|
|
||
|
|
||
|
-- Instance Identifiers for Board Objects
|
||
|
|
||
|
-- The Instance Identifiers for board objects is the number of the slot in
|
||
|
-- the MMAC cage.
|
||
|
|
||
|
-- Common Board Objects
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardIndex
|
||
|
|
||
|
boardIndex OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The slot number of this board."
|
||
|
::= { commonB 1 }
|
||
|
|
||
|
boardName OBJECT-TYPE
|
||
|
SYNTAX DisplayString
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The name of the board. This field will only contain printable ASCII
|
||
|
characters."
|
||
|
::= { commonB 2 }
|
||
|
|
||
|
boardType OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The type of the MIM. (eg. FOT, TPT, etc). See appendix A for
|
||
|
encoding."
|
||
|
::= { commonB 3 }
|
||
|
|
||
|
boardTotalPorts OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Total number of ports supported on this board."
|
||
|
::= { commonB 4 }
|
||
|
|
||
|
boardStatus OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
disabled(1),
|
||
|
enabled(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS deprecated
|
||
|
DESCRIPTION
|
||
|
"The administrative status of this MIM."
|
||
|
::= { commonB 5 }
|
||
|
|
||
|
boardPortsOn OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of operating ports on the board."
|
||
|
::= { commonB 6 }
|
||
|
|
||
|
boardOper OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
operational(1),
|
||
|
notOperational(2)
|
||
|
}
|
||
|
ACCESS read-only
|
||
|
STATUS deprecated
|
||
|
DESCRIPTION
|
||
|
"Returns a value indicating whether any of the enabled ports on the
|
||
|
board are not operational, thereby placing the board in a
|
||
|
non-operational state."
|
||
|
::= { commonB 7 }
|
||
|
|
||
|
boardActiveUsers OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of active users seen on this board."
|
||
|
::= { commonB 8 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
|
||
|
|
||
|
-- Ethernet Board Objects
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardIndex, an INTEGER
|
||
|
|
||
|
boardTotalPkts OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The total number of packets this board has seen since the last
|
||
|
reset."
|
||
|
::= { ethernetB 1 }
|
||
|
|
||
|
boardErrorPkts OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of packets that have experienced an error."
|
||
|
::= { ethernetB 2 }
|
||
|
|
||
|
boardTransColls OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of transmit collisions this board has detected."
|
||
|
::= { ethernetB 3 }
|
||
|
|
||
|
boardRecColls OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of Receive mode collisions this board has detected."
|
||
|
::= { ethernetB 4 }
|
||
|
|
||
|
boardAlignErrs OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of misaligned frames this board has detected."
|
||
|
::= { ethernetB 5 }
|
||
|
|
||
|
boardCRCErrs OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of packets with bad CRC detected."
|
||
|
::= { ethernetB 6 }
|
||
|
|
||
|
boardRunts OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of runt frames detected by this board."
|
||
|
::= { ethernetB 7 }
|
||
|
|
||
|
boardOOWColls OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of out-of-window collisions detected by this board."
|
||
|
::= { ethernetB 8 }
|
||
|
|
||
|
boardNoResources OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of times the no resources condition was detected for
|
||
|
this board."
|
||
|
::= { ethernetB 9 }
|
||
|
|
||
|
boardRecBytes OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of bytes detected on this board."
|
||
|
::= { ethernetB 10 }
|
||
|
|
||
|
boardGiants OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of packets longer than 1518 bytes detected on this board."
|
||
|
::= { ethernetB 11 }
|
||
|
|
||
|
boardOSIFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with OSI protocol seen by this board."
|
||
|
::= { ethernetB 12 }
|
||
|
|
||
|
boardNovellFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with NOVELL protocol seen by this board."
|
||
|
::= { ethernetB 13 }
|
||
|
|
||
|
boardBanyanFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with BANYAN protocol seen by this board."
|
||
|
::= { ethernetB 14 }
|
||
|
|
||
|
boardDECNetFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with DECNET protocol seen by this board."
|
||
|
::= { ethernetB 15 }
|
||
|
|
||
|
boardXNSFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with XNS protocol seen by this board."
|
||
|
::= { ethernetB 16 }
|
||
|
|
||
|
boardIPFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with TCPIP protocol seen by this board."
|
||
|
::= { ethernetB 17 }
|
||
|
|
||
|
boardCtronFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with Cabletron protocol seen by this board."
|
||
|
::= { ethernetB 18 }
|
||
|
|
||
|
boardAppletalkFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with Appletalk protocol seen by this board."
|
||
|
::= { ethernetB 19 }
|
||
|
|
||
|
boardOtherFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this board, that do not fall into
|
||
|
any of the previously listed protocol catagories."
|
||
|
::= { ethernetB 20 }
|
||
|
|
||
|
board64To127Frames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this board, with frame sizes between
|
||
|
64 and 127 bytes."
|
||
|
::= { ethernetB 21 }
|
||
|
|
||
|
board128To255Frames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this board, with frame sizes between
|
||
|
128 and 255 bytes."
|
||
|
::= { ethernetB 22 }
|
||
|
|
||
|
board256To511Frames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this board, with frame sizes between
|
||
|
256 and 511 bytes."
|
||
|
::= { ethernetB 23 }
|
||
|
|
||
|
board512To1023Frames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this board, with frame sizes between
|
||
|
512 and 1023 bytes."
|
||
|
::= { ethernetB 24 }
|
||
|
|
||
|
board1024To1518Frames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this board, with frame sizes between
|
||
|
1024 and 1518 bytes."
|
||
|
::= { ethernetB 25 }
|
||
|
|
||
|
boardBroadPkts OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The sum of broadcast packets detected on all ports of this board."
|
||
|
::= { ethernetB 26 }
|
||
|
|
||
|
boardMultPkts OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The sum of multicast packets detected on all ports of this board."
|
||
|
::= { ethernetB 27 }
|
||
|
|
||
|
|
||
|
boardSrcAddrLocked OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
lockOff(1),
|
||
|
lockOn(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"If this is set to 2, any source addresses that are detected on
|
||
|
station port that are not in the table will cause the port to
|
||
|
be turned off."
|
||
|
::= { ethernetB 31 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
|
||
|
-- Token Ring Board Objects
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardIndex, an INTEGER
|
||
|
|
||
|
boardTotalRingPorts OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The total number of ring ports on this board."
|
||
|
::= { tokenRingB 1 }
|
||
|
|
||
|
boardTotalStationPorts OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The total number of station ports on this board."
|
||
|
::= { tokenRingB 2 }
|
||
|
|
||
|
boardModeStatus OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
mgmtMode(1),
|
||
|
autoMOde(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This describes the mode of this board. autoMode
|
||
|
means the board is using the hardware defaults. mgmtMode
|
||
|
means the board is using setting by the user."
|
||
|
::= { tokenRingB 3 }
|
||
|
|
||
|
boardTotalRingPortsOn OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of enabled ring ports on this board."
|
||
|
::= { tokenRingB 4 }
|
||
|
|
||
|
boardTotalStationPortsOn OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of enabled station ports on this board."
|
||
|
::= { tokenRingB 5 }
|
||
|
|
||
|
boardSpeed OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
fourMHz(4),
|
||
|
sixteenMhz(16)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The speed of the board. The board will expect to receive
|
||
|
data at this speed."
|
||
|
::= { tokenRingB 6 }
|
||
|
|
||
|
|
||
|
ringSpeedFault OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
noFaultDetected(1),
|
||
|
faultDetected(2)
|
||
|
}
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Data speed of station mismatches configuration speed of board. Board
|
||
|
is automatically bypassed."
|
||
|
::= { tokenRingB 7 }
|
||
|
|
||
|
boardSpeedFaultPort OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This object indicates which ring speed detect circuit(s) caused the
|
||
|
fault, if there was one. The return code indicates the location on
|
||
|
the board feeding the speed detect circuit(s). Ring in means the
|
||
|
circuit on the back-up path between the ring out port and the ring
|
||
|
in port. FNB means the circuit between the ring in port and the FNB.
|
||
|
NotApplicable means that a ring Speed Fault has not occurred.
|
||
|
Since more than one circuit can cause the fault, the return code is
|
||
|
the sum of the following values:
|
||
|
1 - FNB
|
||
|
2 - RingIn
|
||
|
4 - RingOut
|
||
|
8 - NotApplicable
|
||
|
"
|
||
|
::= { tokenRingB 8 }
|
||
|
|
||
|
boardFirstRingPort OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This object defines which port on the board is the first ring port.
|
||
|
All ring port numbers will be consecutive. Using this in conjunction
|
||
|
with BoardRingPorts, all ring port numbers can be determined."
|
||
|
::= { tokenRingB 9 }
|
||
|
|
||
|
boardBypassRingPortState OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
off(1),
|
||
|
on(2),
|
||
|
illegal(3)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This object sets and reports the state of the ring bypass relay on
|
||
|
boards which contain a ring bypass relay. The ring bypass relay will
|
||
|
separate only the ring ports from the FNB. The FNB only bypasses the
|
||
|
station ports on these boards. The illegal value (3) will return an
|
||
|
error status if set."
|
||
|
::= { tokenRingB 10 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
|
||
|
-- Port Object Definitions
|
||
|
-- This section will define the objects associated with ports.
|
||
|
|
||
|
|
||
|
-- Formal Definitions within Port
|
||
|
|
||
|
commonP OBJECT IDENTIFIER ::= { portR2 1}
|
||
|
|
||
|
ethernetP OBJECT IDENTIFIER ::= { portR2 2}
|
||
|
|
||
|
tokenRingP OBJECT IDENTIFIER ::= { portR2 3}
|
||
|
|
||
|
fDDIP OBJECT IDENTIFIER ::= { portR2 4}
|
||
|
|
||
|
|
||
|
-- Instance Identifiers for Port Objects
|
||
|
-- The instance identifiers for port objects are board# and port#.
|
||
|
-- The format of the port identifier is Board_num.Port_num or B.P.
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardIndex and portIndex, both INTEGERs
|
||
|
|
||
|
portIndex OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The slot number of this port."
|
||
|
::= { commonP 1 }
|
||
|
|
||
|
portMediaType OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
bnc(1), -- Ethernet coaxial connector
|
||
|
aui(2), -- Ethernet AUI connector
|
||
|
tp(3), -- Ethernet Twisted Pair connector
|
||
|
tenbt(4), -- Ethernet 10Base-T Twisted Pair connector
|
||
|
fot(5), -- Ethernet Fiber Optic connector
|
||
|
laser(6), -- Ethernet Laser Fiber Optic connector
|
||
|
stp(7), -- Token Ring Shielded Twisted Pair connector
|
||
|
utp(8), -- Token Ring Unshielded Twisted Pair connector
|
||
|
fo(9), -- Token Ring Fiber Optic connector
|
||
|
otherMedia(10) -- Media type not listed above
|
||
|
}
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The type of the port. (eg. FOT, TPT, etc)."
|
||
|
::= { commonP 2 }
|
||
|
|
||
|
portAdminState OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
off(1),
|
||
|
on( 2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The administrative status of this port."
|
||
|
::= { commonP 3 }
|
||
|
|
||
|
portSourceAddr OBJECT-TYPE
|
||
|
SYNTAX OCTET STRING
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"A source address that has been seen on this port."
|
||
|
::= { commonP 4 }
|
||
|
|
||
|
portOper OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
notOperational(1),
|
||
|
operational(2)
|
||
|
}
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"Returns a value indicating whether this port is in an operational
|
||
|
state."
|
||
|
::= { commonP 5 }
|
||
|
|
||
|
portActiveUsers OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of active users seen on this port."
|
||
|
::= { commonP 6 }
|
||
|
|
||
|
portName OBJECT-TYPE
|
||
|
SYNTAX DisplayString
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The name of the port. this field will only contain printable ASCII
|
||
|
characters."
|
||
|
::= { commonP 7 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
|
||
|
-- Ethernet Port Objects
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardIndex and portIndex, both INTEGERs
|
||
|
|
||
|
portTopologyType OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
stations(1),
|
||
|
trunk(2)
|
||
|
}
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The topological type of the port."
|
||
|
::= { ethernetP 1 }
|
||
|
|
||
|
portLinkStatus OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
linkSignalInactive(1),
|
||
|
linkSignalActive(2),
|
||
|
linkSignalNotSupported(3)
|
||
|
}
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The state of the link signal for this port."
|
||
|
::= { ethernetP 2 }
|
||
|
|
||
|
portStatus OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
active(1),
|
||
|
segmented(2)
|
||
|
}
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The network state of this port."
|
||
|
::= { ethernetP 3 }
|
||
|
|
||
|
portTotalPkts OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The total number of packets this port has seen since the last reset."
|
||
|
::= { ethernetP 4 }
|
||
|
|
||
|
portErrorPkts OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of packets that have experienced an error."
|
||
|
::= { ethernetP 5 }
|
||
|
|
||
|
portXmitColls OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of Transmit mode collisions this port has detected."
|
||
|
::= { ethernetP 6 }
|
||
|
|
||
|
portRecColls OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of Receive mode collisions this port has detected."
|
||
|
::= { ethernetP 7 }
|
||
|
|
||
|
portAlignErrs OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of misaligned frames this port has detected."
|
||
|
::= { ethernetP 8 }
|
||
|
|
||
|
portCRCErrs OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of packets with bad CRC detected."
|
||
|
::= { ethernetP 9 }
|
||
|
|
||
|
portRunts OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of runt frames detected by this port."
|
||
|
::= { ethernetP 10 }
|
||
|
|
||
|
portOOWColls OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of out-of-window collisions detected by this port."
|
||
|
::= { ethernetP 11 }
|
||
|
|
||
|
portNoResorces OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of times the no resource condition is detected on this
|
||
|
port."
|
||
|
::= { ethernetP 12 }
|
||
|
|
||
|
portRecBytes OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of bytes detected on the network."
|
||
|
::= { ethernetP 13 }
|
||
|
|
||
|
portGiants OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames longer than 1518 bytes detected on this port."
|
||
|
::= { ethernetP 14 }
|
||
|
|
||
|
portRedundCrt OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The redundant circuit with which this port is associated."
|
||
|
::= { ethernetP 15 }
|
||
|
|
||
|
portRedundType OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
notUsed(1), -- indicates that the port is not used
|
||
|
-- in circuit
|
||
|
primary(2),
|
||
|
backup(3)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The type of port this port is in the redundant circuit. The port
|
||
|
must be associated with a redundant circuit first, using the object
|
||
|
portRedundCrt."
|
||
|
::= { ethernetP 16 }
|
||
|
|
||
|
portRedundStatus OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
notUsed(1), -- indicates that the port is not used
|
||
|
-- in circuit
|
||
|
active(2),
|
||
|
inactive(3)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The current state of this port is in the redundant circuit. The port
|
||
|
must be associated with a redundant circuit first, using the object
|
||
|
portRedundCrt."
|
||
|
::= { ethernetP 17 }
|
||
|
|
||
|
portForceTrunkType OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
notForced(1),
|
||
|
forced(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This variable forces a port to be a trunk port."
|
||
|
::= { ethernetP 18 }
|
||
|
|
||
|
portOSIFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with OSI protocol seen by this port."
|
||
|
::= { ethernetP 19 }
|
||
|
|
||
|
portNovellFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with NOVELL protocol seen by this port."
|
||
|
::= { ethernetP 20 }
|
||
|
|
||
|
portBanyanFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with BANYAN protocol seen by this port."
|
||
|
::= { ethernetP 21 }
|
||
|
|
||
|
portDECNetFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with DECNET protocol seen by this port."
|
||
|
::= { ethernetP 22 }
|
||
|
|
||
|
portXNSFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with XNS protocol seen by this port."
|
||
|
::= { ethernetP 23 }
|
||
|
|
||
|
portIPFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with TCPIP protocol seen by this port."
|
||
|
::= { ethernetP 24 }
|
||
|
|
||
|
portCtronFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with Cabletron protocol seen by this port."
|
||
|
::= { ethernetP 25 }
|
||
|
|
||
|
portAppletalkFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames with Appletalk protocol seen by this port."
|
||
|
::= { ethernetP 26 }
|
||
|
|
||
|
portOtherFrames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this port, that do not fall into
|
||
|
any of the previously listed protocol catagories."
|
||
|
::= { ethernetP 27 }
|
||
|
|
||
|
port64To127Frames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this port, with frame sizes between
|
||
|
64 and 127 bytes."
|
||
|
::= { ethernetP 28 }
|
||
|
|
||
|
port128To255Frames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this port, with frame sizes between
|
||
|
128 and 255 bytes."
|
||
|
::= { ethernetP 29 }
|
||
|
|
||
|
port256To511Frames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this port, with frame sizes between
|
||
|
256 and 511 bytes."
|
||
|
::= { ethernetP 30 }
|
||
|
|
||
|
port512To1023Frames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this port, with frame sizes between
|
||
|
512 and 1023 bytes."
|
||
|
::= { ethernetP 31 }
|
||
|
|
||
|
port1024To1518Frames OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The number of frames seen by this port, with frame sizes between
|
||
|
1024 and 1518 bytes."
|
||
|
::= { ethernetP 32 }
|
||
|
|
||
|
portBroadPkts OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The sum of broadcast packets detected on this port."
|
||
|
::= { ethernetP 33 }
|
||
|
|
||
|
portMultPkts OBJECT-TYPE
|
||
|
SYNTAX Counter
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The sum of multicast packets detected on this port."
|
||
|
::= { ethernetP 34 }
|
||
|
|
||
|
portSrcAddrLocked OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
lockOff(1),
|
||
|
lockOn(2)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"If this is set to 2, any source addresses that are detected on
|
||
|
station ports that are not in the table will cause the port to
|
||
|
be turned off."
|
||
|
::= { ethernetP 38 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
|
||
|
-- Token Ring Port Objects
|
||
|
-- Token Ring Port Objects are further broken down into station objects and
|
||
|
-- Ring-In/Ring-Out objects. The formal definitions are:
|
||
|
|
||
|
|
||
|
stationP OBJECT IDENTIFIER ::= { tokenRingP 1 }
|
||
|
|
||
|
ringP OBJECT IDENTIFIER ::= { tokenRingP 2 }
|
||
|
|
||
|
ringPort2 OBJECT IDENTIFIER ::= { tokenRingP 3 }
|
||
|
|
||
|
commonRP OBJECT IDENTIFIER ::= { ringPort2 1 }
|
||
|
|
||
|
autowrapRP OBJECT IDENTIFIER ::= { ringPort2 2 }
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardIndex and portIndex, both INTEGERs
|
||
|
|
||
|
stationPortLinkStatus OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
linkSignalInactive(1),
|
||
|
linkSignalActive(2)
|
||
|
}
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"When station is supplying phantom current the Link Signal is active.
|
||
|
When there is no phantom current the Link Signal is inactive."
|
||
|
::= { stationP 1 }
|
||
|
|
||
|
stationPortLinkStateTime OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The amount of in seconds which have elapsed since the station port
|
||
|
last changed state. Note: setting this to zero will clear the time."
|
||
|
::= { stationP 2 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
|
||
|
-- This section will define the objects associated with Ring In and Ring
|
||
|
-- Out ports, e.g. trmim10R.
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardIndex and portIndex, both INTEGERs
|
||
|
|
||
|
ringPortLinkStatus OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
off(1), -- wrapped
|
||
|
on(2) -- active
|
||
|
}
|
||
|
ACCESS read-only
|
||
|
STATUS obsolete
|
||
|
DESCRIPTION
|
||
|
"Reports the link state of a ring port."
|
||
|
::= { ringP 1 }
|
||
|
|
||
|
ringPortLinkStateTime OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS obsolete
|
||
|
DESCRIPTION
|
||
|
"Reports the time (in seconds) since the ring port's link
|
||
|
state changed."
|
||
|
::= { ringP 2 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardIndex and portIndex, both INTEGERs
|
||
|
|
||
|
commonRPcapabilities OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
nonAutowrap(1),
|
||
|
autowrap(2),
|
||
|
selectable(3)
|
||
|
}
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This object returns a code indicating that the queried ring port
|
||
|
is nonautowrap, autowrap or selectable."
|
||
|
::= { commonRP 1 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardIndex and portIndex, both INTEGERs
|
||
|
|
||
|
autowrapRPFaultStatus OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
faultUndetectable(1),
|
||
|
noFaultDetected(2),
|
||
|
faultDetected(3)
|
||
|
}
|
||
|
ACCESS read-only
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This object reports the wire fault of an autowrappable ring port."
|
||
|
::= { autowrapRP 1 }
|
||
|
|
||
|
autowrapRPFaultStateTime OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This object reports the amount of time in time ticks since the ring
|
||
|
port fault state last changed. Writing zero to this object resets
|
||
|
the time. If a zero is read, it means either zero time ticks have
|
||
|
passed or the ring port is nonautowrap."
|
||
|
::= { autowrapRP 2 }
|
||
|
|
||
|
autowrapRPSelectedType OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
unselectable(1),
|
||
|
stp(2), -- sheilded twisted pair
|
||
|
fo(3) -- Fiber Optic
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This object indicates the media type of the indicated ring port on
|
||
|
some boards. Some boards provide both STP and fiber optic ring ports.
|
||
|
The unselectable value will return an error if set. A set of STP or FO
|
||
|
for a non-selectable ring port will not do anything, i.e. the status
|
||
|
of normal is returned."
|
||
|
::= { autowrapRP 3 }
|
||
|
|
||
|
autowrapRPPhantomCurrent OBJECT-TYPE
|
||
|
SYNTAX INTEGER
|
||
|
{
|
||
|
noPhantomAvailable(1),
|
||
|
activatePhantom(2),
|
||
|
deactivatePhantom(3)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This object tells the board to turn on phantom current for the ring
|
||
|
port and look for wire faults. NoPhantomAvailable will return an
|
||
|
error if set. A set of activatePhantom or deactivatePhantom for a
|
||
|
non-autowrap ring port will not do anything, i.e. the status of
|
||
|
normal is returned."
|
||
|
::= { autowrapRP 4 }
|
||
|
|
||
|
-- End of Virtual Table
|
||
|
|
||
|
-- Product specific Objects
|
||
|
-- For each of the individual repeaters/bridges there are several objects
|
||
|
-- that particular to that product.
|
||
|
|
||
|
|
||
|
fNB OBJECT IDENTIFIER ::= { subSysMMAC 1 }
|
||
|
|
||
|
|
||
|
-- FNB Objects:
|
||
|
|
||
|
-- Start of Virtual Table
|
||
|
-- This table is indexed by boardIndex, an INTEGER
|
||
|
|
||
|
connectedLeft OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
detached(1),
|
||
|
attached(2),
|
||
|
faulted(3)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The Connected Left board (board n + 1) has the following states:
|
||
|
|
||
|
Detached == 1 (Management (only management) detached,
|
||
|
read/write).
|
||
|
Attached == 2 (Management/AutoMode attached, read/write).
|
||
|
Faulted == 3 (Management/AutoMode tried to attach but
|
||
|
failed READ ONLY).
|
||
|
"
|
||
|
::= { fNB 1 }
|
||
|
|
||
|
connectedRight OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
detached(1),
|
||
|
attached(2),
|
||
|
faulted(3)
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"The Connected Right board (board n - 1) has the following states:
|
||
|
|
||
|
Detached == 1 (Management (only management) detached,
|
||
|
read/write).
|
||
|
Attached == 2 (Management/AutoMode attached, read/write ).
|
||
|
Faulted == 3 (Management/AutoMode tried to attach but
|
||
|
failed READ ONLY).
|
||
|
"
|
||
|
::= { fNB 2 }
|
||
|
|
||
|
boardBypassState OBJECT-TYPE
|
||
|
SYNTAX INTEGER {
|
||
|
off(1), -- not bypassed
|
||
|
on(2) -- bypassed
|
||
|
}
|
||
|
ACCESS read-write
|
||
|
STATUS mandatory
|
||
|
DESCRIPTION
|
||
|
"This object indicates that the board is in the bypassed state
|
||
|
when it is ON. Bypassed means the board is NOT attached to the
|
||
|
FNB."
|
||
|
::= { fNB 3 }
|
||
|
|
||
|
|
||
|
|
||
|
-- TrapTypes
|
||
|
--
|
||
|
-- This section will describe the trap types that the
|
||
|
-- repeater section of the IRM3 can generate. These are not
|
||
|
-- objects, but Object identifers used to indicate the specfic
|
||
|
-- trap. They are taken from the object space and are thus
|
||
|
-- documented here.
|
||
|
--
|
||
|
-- The SNMP protocol provides a mechanism for
|
||
|
-- asynchronusly notifying management stations of significant
|
||
|
-- changes in the network. This mechanism is the SNMP trap
|
||
|
-- message. This document will describe the general format for
|
||
|
-- all trap messages that Cabletron products will generate as
|
||
|
-- well as the specific traps that the will be generated by the
|
||
|
-- IRM3.
|
||
|
--
|
||
|
-- Trap Formats
|
||
|
--
|
||
|
-- The SNMP trap messages are composed of two user
|
||
|
-- definable areas: the specific trap type and the VarBindings
|
||
|
-- (eg. the interesting information). The specific trap type is
|
||
|
-- an INTEGER that is used to determine the specific trap that
|
||
|
-- has occurred. The "interesting information" contains a group
|
||
|
-- of objects identifiers (OID) and their values that provide
|
||
|
-- information about the trap.
|
||
|
--
|
||
|
--
|
||
|
-- Trap Description
|
||
|
--
|
||
|
-- PortSegmenting
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x101
|
||
|
--
|
||
|
-- When a port goes from operational to segmented, a trap
|
||
|
-- will be generated. For these purposes, the port state will
|
||
|
-- be sampled every XXX seconds, thus it will be statistically
|
||
|
-- possible to miss oscillating circuits.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
-- - Board number
|
||
|
-- - Port number
|
||
|
--
|
||
|
-- Trap Description
|
||
|
--
|
||
|
-- PortUnsegementing
|
||
|
-- Specfic Trap Type Code - 0x102
|
||
|
--
|
||
|
-- When it is detected that a previously segmented port
|
||
|
-- has gone operational, a trap will be generated. This is
|
||
|
-- also sampled, thus a trap may not be generated for each
|
||
|
-- transition.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
-- - Board number
|
||
|
-- - Port number
|
||
|
--
|
||
|
--
|
||
|
--
|
||
|
-- Trap Description
|
||
|
--
|
||
|
-- PortLinkUp
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x103
|
||
|
--
|
||
|
-- This trap will be generated when it is determined that
|
||
|
-- MAU has been attached to the MMAC. This is only appropriate
|
||
|
-- for MIMs that support the concept of a link state.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
-- - Board number
|
||
|
-- - Port number
|
||
|
--
|
||
|
-- Trap Description
|
||
|
--
|
||
|
-- PortLinkDown
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x104
|
||
|
--
|
||
|
-- This trap will be generated when a previously attached
|
||
|
-- MAU is removed or powered down. Again, this is only
|
||
|
-- appropriate for MIM's that support link state.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
-- - Board number
|
||
|
-- - Port number
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- NewSourceAddress
|
||
|
-- Specfic Trap Type Code - 0x105
|
||
|
--
|
||
|
-- This trap will be generated when the MMAC detects the
|
||
|
-- existence of a new source address on one of it's ports.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
--
|
||
|
-- - Board number
|
||
|
-- - Port number
|
||
|
-- - The new source address
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- SourceAddressTimeout
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x106
|
||
|
--
|
||
|
-- This trap will indicate that the MMAC has not detected
|
||
|
-- a packet generated by this source address within a certain
|
||
|
-- timeout.
|
||
|
--
|
||
|
--
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
--
|
||
|
-- - Board number
|
||
|
-- - Port number
|
||
|
-- - Source address that timed out.
|
||
|
--
|
||
|
-- Trap Description
|
||
|
--
|
||
|
-- BoardRemoval
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x107
|
||
|
--
|
||
|
-- This trap will be generated when the MMAC detects that
|
||
|
-- MIM has been removed.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
--
|
||
|
-- - Board number
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- BoardInsertion
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x108
|
||
|
--
|
||
|
--
|
||
|
-- This trap will be generated when the MMAC determines
|
||
|
-- that a new board has been inserted.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
--
|
||
|
-- - Board number
|
||
|
-- - Board type
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- ActivePortInRedundantCircuitFailed
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x109
|
||
|
--
|
||
|
-- This trap will be generated when the active port in a
|
||
|
-- redundant circuit has failed polling. This will indicate the
|
||
|
-- activation of redundancy.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
--
|
||
|
-- - Board number
|
||
|
-- - Port number
|
||
|
-- - Circuit number
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- RedundantPortActivated
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x10a
|
||
|
--
|
||
|
--
|
||
|
--
|
||
|
-- This trap indicates that a new port has been activated
|
||
|
-- in a redundant circuit. This does NOT indicate that this
|
||
|
-- port is usable, but is being tested. If the port fails the
|
||
|
-- above (3.9) trap will be generated.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
--
|
||
|
-- - Board number
|
||
|
-- - Port number
|
||
|
-- - Circuit number
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- RedundantPortTestFailed
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x10b
|
||
|
--
|
||
|
--
|
||
|
--
|
||
|
-- This trap will be generated when the MMAC executes it's
|
||
|
-- periodic redundancy diagnostics and finds on of the ports in
|
||
|
-- a redundant circuit has failed. This message will not
|
||
|
-- indicate that redundancy has been activated, just that the
|
||
|
-- port has failed and should be fixed before it is needed.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
--
|
||
|
-- - Board number
|
||
|
-- - Port number
|
||
|
-- - Circuit number
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- deviceTrafficThresholdExceeded
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x10c
|
||
|
--
|
||
|
-- This trap will be generated when the traffic (good
|
||
|
-- packets per time interval) has been exceed for the entire
|
||
|
-- MMAC.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
--
|
||
|
-- - threshold value
|
||
|
-- - timebase value
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- deviceErrorThresholdExceeded
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x10d
|
||
|
--
|
||
|
-- This trap will be generated when packets of the
|
||
|
-- selected error type exceeds a threshold percentage of the
|
||
|
-- good packets for a particular interval for the entire MMAC.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
--
|
||
|
-- - threshold value
|
||
|
-- - selected error type
|
||
|
-- - timebase
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- deviceCollsionThresholdExceeded
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x10e
|
||
|
--
|
||
|
-- This trap will be generated when collsions exceed a
|
||
|
-- threshold percentage of the good packets for a particular
|
||
|
-- interval for the entire MMAC.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
--
|
||
|
-- - threshold value
|
||
|
-- - timebase
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- BoardTrafficThresholdExceeded
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x10f
|
||
|
--
|
||
|
-- This trap will be generated when the traffic (good
|
||
|
-- packets per time interval) has been exceed for a particular
|
||
|
-- MIM.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
--
|
||
|
-- - threshold value
|
||
|
-- - timebase value
|
||
|
-- - board number
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- BoardErrorThresholdExceeded
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x110
|
||
|
--
|
||
|
-- This trap will be generated when packets of the
|
||
|
-- selected error type exceeds a threshold percentage of the
|
||
|
-- good packets for a particular interval for a particular MIM.
|
||
|
-- This will most likely indicate a bad MIM.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
-- - threshold value
|
||
|
-- - selected error type
|
||
|
-- - timebase
|
||
|
-- - Board number
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- BoardCollisionThresholdExceeded
|
||
|
--
|
||
|
--
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x111
|
||
|
--
|
||
|
--
|
||
|
-- This trap will be generated when collisions exceed a
|
||
|
-- threshold percentage of the good packets for a particular
|
||
|
-- interval for a particular MIM.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
--
|
||
|
-- - threshold value
|
||
|
-- - timebase
|
||
|
-- - Board number
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- PortTrafficThresholdExceeded
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x112
|
||
|
--
|
||
|
--
|
||
|
-- This trap will be generated when the traffic (good
|
||
|
-- packets per time interval) has been exceed for a particular
|
||
|
-- port.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
--
|
||
|
-- - threshold value
|
||
|
-- - timebase value
|
||
|
-- - board number
|
||
|
-- - port number
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- PortErrorThresholdExceeded
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x113
|
||
|
--
|
||
|
--
|
||
|
--
|
||
|
-- This trap will be generated when packets of the
|
||
|
-- selected error type exceeds a threshold percentage of the
|
||
|
-- good packets for a particular interval for a particular
|
||
|
-- port.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
--
|
||
|
-- - threshold value
|
||
|
-- - selected error type
|
||
|
-- - timebase
|
||
|
-- - board number
|
||
|
-- - port number
|
||
|
--
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- PortCollisionThresholdExceeded
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x114
|
||
|
--
|
||
|
-- This trap will be generated when collisions exceed a
|
||
|
-- threshold percentage of the good packets for a particular
|
||
|
-- interval for a particular port.
|
||
|
--
|
||
|
-- The interesting information will include:
|
||
|
--
|
||
|
-- - threshold value
|
||
|
-- - timebase
|
||
|
-- - board number
|
||
|
-- - port number
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- PortTypeChanged
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x115
|
||
|
--
|
||
|
-- This trap indicates that a port has changed from a
|
||
|
-- station port to a link port or vice versa.
|
||
|
--
|
||
|
-- The interesting information is:
|
||
|
--
|
||
|
-- - Board number
|
||
|
-- - Port Number
|
||
|
-- - New type value
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- LockSTATUSChanged
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x116
|
||
|
--
|
||
|
-- This trap is generated when the status of the address lock
|
||
|
-- changes.
|
||
|
--
|
||
|
-- The interesting information is:
|
||
|
--
|
||
|
-- - New lock status
|
||
|
--
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- PortSecurityViolation
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x117
|
||
|
--
|
||
|
-- This trap is generated when a source address other than those
|
||
|
-- locked to a port is seen.
|
||
|
--
|
||
|
-- The interesting information is:
|
||
|
--
|
||
|
-- - Board number
|
||
|
-- - Port Number
|
||
|
-- - Violating Address
|
||
|
--
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- PortViolationReset
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x118
|
||
|
--
|
||
|
-- This trap is generated when management intervention has
|
||
|
-- reset a port after a violation has occured.
|
||
|
--
|
||
|
-- The interesting information is:
|
||
|
--
|
||
|
-- - Board Number
|
||
|
-- - Port Number
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- EnvTempWarm
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x119
|
||
|
--
|
||
|
-- This trap is generated when the device detects that the temperature
|
||
|
-- within the device has reached a WARM condition.
|
||
|
--
|
||
|
--
|
||
|
-- The interesting information is:
|
||
|
--
|
||
|
-- - Board Number
|
||
|
--
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- EnvTempHot
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x11A
|
||
|
--
|
||
|
-- This trap is generated when the device detects that the temperature
|
||
|
-- within the device has reached a HOT condition.
|
||
|
|
||
|
-- The interesting information is:
|
||
|
--
|
||
|
-- - Board Number
|
||
|
--
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- EnvTempNormal
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x11C
|
||
|
--
|
||
|
-- This trap is generated when the device detects that the temperature
|
||
|
-- within the device has returned to a NORMAL state.
|
||
|
--
|
||
|
-- The interesting information is:
|
||
|
--
|
||
|
-- - Board Number
|
||
|
--
|
||
|
--
|
||
|
-- Trap Description
|
||
|
-- EnvVoltageLow
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x11B
|
||
|
--
|
||
|
-- This trap is generated when a board detects that it's power supply
|
||
|
-- voltage is LOW.
|
||
|
--
|
||
|
--
|
||
|
-- The interesting information is:
|
||
|
--
|
||
|
-- - Power Supply Number
|
||
|
--
|
||
|
|
||
|
-- Trap Description
|
||
|
-- EnvVoltageNormal
|
||
|
--
|
||
|
-- Specfic Trap Type Code - 0x11D
|
||
|
--
|
||
|
-- This trap is generated when the device detects that the system voltage
|
||
|
-- has returned to a NORMAL state.
|
||
|
--
|
||
|
--
|
||
|
-- The interesting information is:
|
||
|
--
|
||
|
-- - None
|
||
|
--
|
||
|
|
||
|
-- Trap Description
|
||
|
-- EnvFanFailure
|
||
|
--
|
||
|
-- Specific Trap Type Code - 0x11E
|
||
|
--
|
||
|
-- This trap is generated when the device detects that one or more fans in
|
||
|
-- the chassis have failed.
|
||
|
--
|
||
|
--
|
||
|
-- The interesting information is:
|
||
|
--
|
||
|
-- - None
|
||
|
--
|
||
|
|
||
|
-- Trap Description
|
||
|
-- EnvFanNormal
|
||
|
--
|
||
|
-- Specific Trap Type Code - 0x11F
|
||
|
--
|
||
|
-- This trap is generated when the device detects that all fans in the chassis
|
||
|
-- are functional.
|
||
|
--
|
||
|
--
|
||
|
-- The interesting information is:
|
||
|
--
|
||
|
-- - None
|
||
|
--
|
||
|
|
||
|
-- Trap Description
|
||
|
-- DeviceBroadcastThresholdExceeded
|
||
|
--
|
||
|
-- Specific Trap Type Code - 0x120
|
||
|
--
|
||
|
-- This trap is generated when the broadcast packets (per time
|
||
|
-- interval) have exceeded the threshold for the entire MMAC.
|
||
|
--
|
||
|
-- The Interesting Information is:
|
||
|
-- devBroadThreshold { devBroad 2 }
|
||
|
-- devTimeBase { device 24 }
|
||
|
|
||
|
|
||
|
-- Trap Description
|
||
|
-- BoardBroadcastThresholdExceeded
|
||
|
--
|
||
|
-- Specific Trap Type Code - 0x121
|
||
|
--
|
||
|
-- This trap is generated when the broadcast packets (per time
|
||
|
-- interval) have exceeded the threshold for the given board.
|
||
|
--
|
||
|
-- The Interesting Information is:
|
||
|
-- bdBroadThreshold { bdBroad 2 }
|
||
|
-- devTimeBase { device 24 }
|
||
|
-- boardIndex { commonB 1 }
|
||
|
--
|
||
|
|
||
|
|
||
|
-- Trap Description
|
||
|
-- PortBroadcastThresholdExceeded
|
||
|
--
|
||
|
-- Specific Trap Type Code - 0x122
|
||
|
--
|
||
|
-- This trap is generated when the broadcast packets (per time
|
||
|
-- interval) have exceeded the threshold for the given port.
|
||
|
--
|
||
|
-- The Interesting Information is:
|
||
|
-- portBroadThreshold { portBroad 2 }
|
||
|
-- devTimeBase { device 24 }
|
||
|
-- boardIndex { commonB 1 }
|
||
|
-- portIndex { commonP 1 }
|
||
|
--
|
||
|
|
||
|
|
||
|
-- Trap Description
|
||
|
-- BoardLockSTATUSChanged
|
||
|
|
||
|
-- Specific Trap Type Code - 0x134
|
||
|
|
||
|
-- This trap is generated when the status of the address lock
|
||
|
-- changes for a certain board.
|
||
|
|
||
|
-- The Interesting Information is:
|
||
|
|
||
|
-- BoardIndex { rptrPortGrpMgmtEntry 1 }
|
||
|
-- BoardSrcAddrLockState { rptrPortGrpSrcAddrEntry 3 }
|
||
|
|
||
|
|
||
|
-- Trap Description
|
||
|
-- PortLockSTATUSChanged
|
||
|
|
||
|
-- Specific Trap Type Code - 0x135
|
||
|
|
||
|
-- This trap is generated when the status of the address lock
|
||
|
-- changes for a certain port.
|
||
|
|
||
|
-- The Interesting Information is:
|
||
|
|
||
|
-- BoardIndex { rptrPortGrpMgmtEntry 1 }
|
||
|
-- PortIndex { rptrPortMgmtEntry 1 }
|
||
|
-- PortSrcAddrLockState { rptrPortSrcAddrEntry 6 }
|
||
|
|
||
|
|
||
|
-- Token Ring Traps
|
||
|
--
|
||
|
-- Trap Description
|
||
|
--
|
||
|
-- stationLinked--
|
||
|
--
|
||
|
-- Specific Trap Type Code - 0x0201
|
||
|
--
|
||
|
-- This trap is generated in the event that a station port detects a
|
||
|
-- link. The interesting information included with this trap is the
|
||
|
-- board index and port index of the station port which detects link.
|
||
|
--
|
||
|
-- Trap Description
|
||
|
--
|
||
|
-- stationUnlinked
|
||
|
--
|
||
|
-- Specific Trap Type Code - 0x0202
|
||
|
--
|
||
|
-- This trap is generated in the event that a station port detects a
|
||
|
-- link has been removed. The interesting information included with this
|
||
|
-- trap is the board index and port index of the station port which detects
|
||
|
-- that the link has been removed.
|
||
|
|
||
|
-- Trap Description
|
||
|
--
|
||
|
-- ringSpeedFault
|
||
|
--
|
||
|
-- Specific Trap Type Code - 0x0203
|
||
|
--
|
||
|
-- This trap is generated when speed of the board differs from speed of
|
||
|
-- the data passing through the board. The interesting information included
|
||
|
-- with this trap is the board index of the board which detects the ring
|
||
|
-- speed fault.
|
||
|
|
||
|
-- Trap Description
|
||
|
--
|
||
|
-- ringSpeedFaultCleared
|
||
|
--
|
||
|
-- Specific Trap Type Code - 0x0204
|
||
|
--
|
||
|
-- This trap is generated when ring speed fault has been corrected. The
|
||
|
-- interesting information included with this trap is the board index of the
|
||
|
-- board which detects the ring speed fault condition has been removed.
|
||
|
|
||
|
-- Trap Description
|
||
|
--
|
||
|
-- autoWrapWireFault
|
||
|
--
|
||
|
-- Specific Trap Type Code - 0x0205
|
||
|
--
|
||
|
-- This trap is generated when the Shielded Twisted Pair ring port has
|
||
|
-- detected that the phantom current asserted on it does not detect the
|
||
|
-- correct voltage of the received phantom current. The interesting
|
||
|
-- information included with this trap is the board index and the port index
|
||
|
-- of the ring port which detects the autoWrapWireFault.
|
||
|
|
||
|
-- Trap Description
|
||
|
--
|
||
|
-- autoWrapWireFaultCleared
|
||
|
--
|
||
|
-- Specific Trap Type Code - 0x0206
|
||
|
--
|
||
|
-- This trap is generated when the autoWrapWireFault conditions have been
|
||
|
-- removed. The interesting information included with this trap is the board
|
||
|
-- index and the port index of the ring port which detects that the
|
||
|
-- autoWrapWireFault conditions have been removed.
|
||
|
--
|
||
|
--
|
||
|
-- Appendix A - Media type values
|
||
|
--
|
||
|
-- Board Type Value
|
||
|
--
|
||
|
-- Management Modules
|
||
|
-- IRM-2 0xB0
|
||
|
-- IRBM 0xB1
|
||
|
-- IRM-3 0xB2
|
||
|
-- TRMBM-R 0xB4
|
||
|
-- TRMBM-S 0xB5
|
||
|
-- EFDMIM 0xB6
|
||
|
-- ETBMIM 0xB7
|
||
|
-- TRBMIM 0xB8
|
||
|
-- TRMM 0xBB
|
||
|
-- ETWMIM 0xBD
|
||
|
-- TRMMIM 0xBE
|
||
|
-- MiniMMAC 0x10010
|
||
|
-- MRXI 0x30043
|
||
|
-- MRXI-2 0x30042
|
||
|
-- MRXI-28 0x300A0
|
||
|
--
|
||
|
|
||
|
-- Mim Types
|
||
|
-- THNMIM 0x10 or 0x50
|
||
|
-- MT8MIM 0xA0
|
||
|
-- FOTMIM (6 ports) 0xE0
|
||
|
-- FOTMIM (12 ports) 0xC0
|
||
|
-- TPTMIM 0xD0
|
||
|
|
||
|
-- TPMIM-T 0x42
|
||
|
-- TPMIM-T1 0x41
|
||
|
-- TPMIM-T3 0x43
|
||
|
|
||
|
-- TPMIM-24 0x60
|
||
|
-- TPMIM-22 0x61
|
||
|
-- TPMIM-34 0x62
|
||
|
-- TPMIM-32 0x63
|
||
|
|
||
|
-- FOMIM-18 0x90
|
||
|
-- FOMIM-12 0x92
|
||
|
-- FOMIM-16 0x93
|
||
|
-- FOMIM-28 0x94
|
||
|
-- FOMIM-22 0x96
|
||
|
-- FOMIM-26 0x97
|
||
|
-- FOMIM-38 0x98
|
||
|
-- FOMIM-32 0x9A
|
||
|
-- FOMIM-36 0x9B
|
||
|
|
||
|
-- TPRMIM-36 0x70
|
||
|
-- TPRMIM-33 0x71
|
||
|
-- CXRMIM 0x72
|
||
|
-- FORMIM-22 0x73
|
||
|
|
||
|
|
||
|
-- TRMIM-12 0x30
|
||
|
-- TRMIM-10R 0x31
|
||
|
-- TRMIM-10RA 0x131 (will be displayed as TR-10R)
|
||
|
-- TRMIM-22 0x32
|
||
|
-- TRMIM-20R 0x33
|
||
|
-- TRMIM-20RA 0x133 (will be displayed as TR-20R)
|
||
|
|
||
|
-- TRMIM-24A 0x36
|
||
|
-- TRMIM-22A 0x37
|
||
|
|
||
|
-- FTRMIM-28 0x38
|
||
|
-- FTRMIM-22 0x39
|
||
|
-- FTRMIM-26 0x3B
|
||
|
-- TRMIM-34A 0x3C
|
||
|
-- TRMIM-32A 0x3D
|
||
|
-- TRMIM-44A 0x3E
|
||
|
-- TRMIM-42A 0x3F
|
||
|
|
||
|
-- TRRMIM-A 0x3A
|
||
|
-- TRRMIM-2A 0x13A
|
||
|
-- TRRMIM-4A 0x23A
|
||
|
|
||
|
|
||
|
-- FDMMIM-00 0x23
|
||
|
-- FDMMIM-04 0x22
|
||
|
-- FDMMIM-16 0x21
|
||
|
-- FDMMIM-26 0x20
|
||
|
-- FDMMIM-00S 0x27
|
||
|
-- FDMMIM-04S 0x26
|
||
|
-- FDMMIM-16S 0x25
|
||
|
-- FDMMIM-26S 0x24
|
||
|
-- FDCMIM-04 0x2B
|
||
|
-- FDCMIM-08 0x2A
|
||
|
-- FDCMIM-16 0x2F
|
||
|
-- FDCMIM-12 0x2D
|
||
|
-- FDCMIM-26 0x2C
|
||
|
-- FDCMIM-22 0x28
|
||
|
|
||
|
|
||
|
-- Third party Mims
|
||
|
|
||
|
-- CISCO Ethernet to Ethernet Router Mim 0x01
|
||
|
-- Xyplex 16 port terminal server. ETSMIM 0x02
|
||
|
-- SGI CPU MIM 0x03
|
||
|
-- CAYMAN Appletalk to Ethernet Router. GATORMIM CS 0x04
|
||
|
-- NOVELL LANTERN ethernet SNMP Monitor. LANTERMIM 0x05
|
||
|
-- CISCO Ethernet to Ethernet Router Mim. CRM-L 0x06
|
||
|
-- CISCO Ethernet to WAN Router Mim. CRM-S 0x07
|
||
|
-- Cayman 1 GATOR STAR GX.M 0x08
|
||
|
-- Cayman 2 0x09
|
||
|
-- Cayman 3 0x0A
|
||
|
-- Cayman 4 0x0B
|
||
|
|
||
|
|
||
|
-- Multi-Port Interfaces Modules
|
||
|
-- MPIM-X 0x20000
|
||
|
-- MPIM-A 0x20001
|
||
|
-- MPIM-C 0x20002
|
||
|
-- MPIM-T 0x20003
|
||
|
-- MPIM-F2 0x20004
|
||
|
-- MPIM-F1 0x20005
|
||
|
-- MPIM-T1 0x20006
|
||
|
-- MPIM-B 0x20007 - BLANK
|
||
|
--
|
||
|
--
|
||
|
-- Single-Port Interface Modules
|
||
|
--
|
||
|
|
||
|
-- SPIM-C 0x20002
|
||
|
-- SPIM-T 0x20003
|
||
|
-- SPIM-F2 0x20004
|
||
|
-- SPIM-F1 0x20005
|
||
|
-- SPIM-T1 0x20006
|
||
|
-- SPIM-B 0x20007 - BLANK
|
||
|
--
|
||
|
--
|
||
|
|
||
|
END
|