The next CL will remove the -G flag, effectively hard-coding it to its
current default (-G=3).
Change-Id: Ib4743b529206928f9f1cca9fdb19989728327831
Reviewed-on: https://go-review.googlesource.com/c/go/+/388534
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Change run.go to apply the GO_TEST_TIMEOUT_SCALE scaling factor to
test timeouts (mentioned in "-t" clause in test header).
Also with this patch, bump up the timeout for fixedbugs/issue46234.go
from 30 to 45 seconds, to avoid flakes on very slow builders.
Updates #50973.
Change-Id: Icbafa482860e24cc1e72fee53511bcc764d06bf1
Reviewed-on: https://go-review.googlesource.com/c/go/+/382774
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This CL updates unified IR to look at the structural type of a
composite literal type, rather than merely the underlying type, to
determine if it's a structure. This fixes a number of currently
failing regress test cases.
Updates #50833.
Change-Id: I11c040c77ec86c23e8ffefcf1ce1aed548687dc5
Reviewed-on: https://go-review.googlesource.com/c/go/+/381074
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Added a new absdiff2.go test case, which works fully without using a
typeparam on the right-hand-side of a type declaration (which is
disallowed). Fixed an issue that the test revealed, which is that we
need to set g.curDecl properly for the "later" functions which are
deferred until after all declarations are initially processed. Also,
g.curDecl may be non-nil in typeDecl for local type declaration. So, we
adjust the associate assertion, and save/restore g.curDecl
appropriately.
Fixes#50790
Change-Id: Ieed76a7ad0a83bccb99cbad4bf98a7bfafbcbbd3
Reviewed-on: https://go-review.googlesource.com/c/go/+/380594
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
In the compiler, we need to distinguish field and method access on a
type param. For field access, we avoid the dictionary access (to create
an interface bound) and just do the normal transformDot() (which will
create the field access on the shape type).
This field access works fine for non-pointer types, since the shape type
preserves the underlying type of all types in the shape. But we
generally merge all pointer types into a single shape, which means the
field will not be accessible via the shape type. So, we need to change
Shapify() so that a type which is a pointer type is mapped to its
underlying type, rather than being merged with other pointers.
Because we don't want to change the export format at this point in the
release, we need to compute StructuralType() directly in types1, rather
than relying on types2. That implementation is in types/type.go, along
with the helper specificTypes().
I enabled the compiler-related tests in issue50417.go, added an extra
test for unnamed pointer types, and added a bunch more tests for
interesting cases involving StructuralType(). I added a test
issue50417b.go similar to the original example, but also tests access to
an embedded field.
I also added a unit test in
cmd/compile/internal/types/structuraltype_test.go that tests a bunch of
unusual cases directly (some of which have no structural type).
Updates #50417
Change-Id: I77c55cbad98a2b95efbd4a02a026c07dfbb46caa
Reviewed-on: https://go-review.googlesource.com/c/go/+/376194
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Issue #50552 is due to a problem with my recent improvement in the
interaction between generics and inlining. In markInlBody(), we now mark
dictionaries and shape methods for export, so they will be available for
any package that inlines the current inlineable function. But we need to
make sure that the dictionary and method symbols have actually been
resolved into Nodes (looked up in the import data), if they are not
already defined, so we can then mark them for export.
Improved header comment on Resolve().
Fixes#50552
Change-Id: I89e52d39d3b9894591d2ad6eb3a8ed3bb5f1e0a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/377714
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
I made the default be that, where there are differences between types2
and -G=0 error messages, we want errorcheck tests to pass types2.
Typically, we can get errorcheck to pass on types2 and -G=0 if they give
the same number of error messages on the same lines, just different
wording. If they give a different number of error messages, then I made
types2 pass. I added an exception list for -G=0 to cover those cases
where -G=0 and types give different numbers of error messages.
Because types2 does not run if there are syntax errors, for several
tests, I had to split the tests into two parts in order to get all the
indicated errors to be reported in types2 (bug228.go, bug388.go,
issue11610.go, issue14520.go)
I tried to preserve the GCCGO labeling correctly (but may have gotten
some wrong). When types2 now matches where a GCCGO error previously
occurred, I transformed GCCGO_ERROR -> ERROR. When types2 no longer
reports an error in a certain place, I transformed ERROR -> GCCGO_ERROR.
When types2 reports an error in a new place, I used GC_ERROR.
The remaining entries in types2Failures are things that I think we
probably still need to fix - either actually missing errors in types2,
or cases where types2 gives worse errors than -G=0.
Change-Id: I7f01e82b322b16094096b67d7ed2bb39b410c34f
Reviewed-on: https://go-review.googlesource.com/c/go/+/372854
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Augmented some of the typeswitch*.go tests so that some instantiations
have duplicate cases, in order to ensure we're testing that.
Spacing changes in the tests are due to gofmt.
Change-Id: I5d3678813505c520c544281d4ac8a62ce7e236ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/370155
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Deal with case where a certain instantiation of a generic
function/method leads to an unsatisfiable type assertion or type case.
In that case, the compiler was causing a fatal error while trying to
create an impossible itab for the dictionary. To deal with that case,
allow ITabLsym() to create a dummy itab even when the concrete type
doesn't implement the interface. This dummy itab is analogous to the
"negative" itabs created on-the-fly by the runtime.
We will use the dummy itab in type asserts and type switches in
instantiations that use that dictionary entry. Since the dummy itab can
never be used for any real value at runtime (since the concrete type
doesn't implement the interface), there will always be a failure for the
corresponding type assertion or a non-match for the corresponding
type-switch case.
Fixes#50002
Change-Id: I1df05b1019533e1fc93dd7ab29f331a74fab9202
Reviewed-on: https://go-review.googlesource.com/c/go/+/369894
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Enable a bunch of types2-related error tests to run successfully, so
they no longer have to be disabled in run.go.
- directive.go: split it into directive.go and directive2.go, since the
possible errors are now split across the parser and noder2, so they
can't all be reported in one file.
- linkname2.go: similarly, split it into linkname2.go and linkname3.go
for the same reason.
- issue16428.go, issue17645.go, issue47201.dir/bo.go: handle slightly
different wording by types2
- issue5609.go: handle slight different error (array length must be
integer vs. array bound too large).
- float_lit3.go: handle slightly different wording (overflows
float vs cannot convert to float)
I purposely didn't try to fix tests yet where there are extra or missing
errors on different lines, since that is not easy to make work for both
-G=3 and -G=0. In a later change, will flip to make the types2 version
match correctly, vs. the -G=0 version.
Change-Id: I6079ff258e3b90146335b9995764e3b1b56cda59
Reviewed-on: https://go-review.googlesource.com/c/go/+/368455
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
First, we need to set base.Pos in varDecl() and typeDecl(), so it will
be correct if we need to report type size errors while converting types.
Changed error calls in types/sizes.go to use Errorf, not ErrorfAt, since
we want to use base.Pos (which will set from t.Pos(), if that is
available).
Second, we need to add an extra call CalcSize(t1.Elem()) in the
TCHANARGS case of CalcSize(). We can use CalcSize() rather than
CheckSize(), since we know the top-level recursive type will have been
calculated by the time we process the fake TCHANARGS type. In -G=0 mode,
the size of the channel element has often been calculated because of
some other processing (but not in the case of #49767). But in -G=3 mode,
we just calculate sizes during the single noder2 pass, so we are more
likely to have not gotten to calculating the size of the element yet,
depending on the order of processing of the deferredTypeStack.
Fixes the tests fixedbugs/issue{42058a,42058b}.go that were
disabled for -G=3 mode.
Had to add exceptions in stdlib_test.go for go/types and types2, because
the types2 typechecker does not know about type size limits.
Fixes#49814Fixes#49771
Updates #49767
Change-Id: I77d058e8ceff68a58c4c386a8cf46799c54b04c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/367955
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We hope to support this feature one day, but it doesn't work currently.
Issue a nice error message instead of having the compiler crash.
Update #47631
Change-Id: I0359411410acbaf9a5b9dbb988cd933de1bb8438
Reviewed-on: https://go-review.googlesource.com/c/go/+/364054
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
When being used by the compiler, fix up types2 error messages to be more
like Go 1.17 compiler errors. In particular:
- add information about which method is missing when a type is not
assignable/convertible/etc. to an interface.
- add information about any existing method which has the same name,
but wrong type.
- add extra hint in the case that the source or destination type is a
pointer to an interface, rather than an interface.
- add extra hint "need type assertion" in the case that the source is
an interface that is implemented by the destination.
- the following change in the CL stack also adds information about any
existing method with a different name that only differs in case.
Include much of the new logic in a new common function
(*Checker).missingMethodReason().
types2 still adds a little more information in some cases then the Go
1.17 compiler. For example, it typically says "(value of type T)",
rather than "(type T)", where "value" could also be "constant",
"variable", etc.
I kept the types2 error messages almost all the same when types2 is not
used by the compiler. The only change (to reduce amount of compatibility
code) was to change "M method" phrasing in one case to "method M"
phrasing in one error message (which is the phrasing it uses in all
other cases). That is the reason that there are a few small changes in
types2/testdata/check/*.src.
Added new test test/fixedbugs/issue48471.go to test that the added
information is appearing correctly.
Also adjusted the pattern matching in a bunch of other
test/fixedbugs/*.go, now that types2 is producing error messages closer
to Go 1.17. Was able to remove a couple test files from the types2
exception list in run.go.
Updated #48471
Change-Id: I8af1eae6eb8a5541d8ea20b66f494e2e795e1956
Reviewed-on: https://go-review.googlesource.com/c/go/+/363436
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Use types2.Structure() to get single underlying type of typeparams, to
handle some unusual cases where a type param is constrained to a single
underlying struct or map type.
Fixes#48538
Change-Id: I289fb7b31d489f7586f2b04aeb1df74e15a9f965
Reviewed-on: https://go-review.googlesource.com/c/go/+/359335
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Many uses of Index/IndexByte/IndexRune/Split/SplitN
can be written more clearly using the new Cut functions.
Do that. Also rewrite to other functions if that's clearer.
For #46336.
Change-Id: I68d024716ace41a57a8bf74455c62279bde0f448
Reviewed-on: https://go-review.googlesource.com/c/go/+/351711
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is caused by some nodes didn't carry the real line number.
Noder1 wraps these node with ir.ParenExpr. To fix this issue,
wraps this node like what noder1 does.
Change-Id: I212cad09b93b8bf1a7adfad416d229d15711918a
Reviewed-on: https://go-review.googlesource.com/c/go/+/349769
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Keith Randall <khr@golang.org>
The variable represents the microarchitecture level for which to compile.
Valid values are v1 (default), v2, v3, v4.
Updates #45453
Change-Id: I095197fc9239d79f98896d7e745e2341354daca4
GitHub-Last-Rev: f83ed17204
GitHub-Pull-Request: golang/go#48359
Reviewed-on: https://go-review.googlesource.com/c/go/+/349595
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Bryan C. Mills <bcmills@google.com>
This is a port of CL 349009 to typecheck importer.
Fixes#48306
Change-Id: Iec3f078089346bd85f0ab739896e079940325011
Reviewed-on: https://go-review.googlesource.com/c/go/+/349011
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
gri@ reports that types2 now correctly handles when type parameters
recursively refer back to the parameterized type, so we might as well
add tests to exercise that. Unified IR also correctly handles
importing and exporting these types, but -G=3 currently does not.
Updates #46461.
Change-Id: I272102aa08c40c980b9aeeca9f834291dfbbcc3e
Reviewed-on: https://go-review.googlesource.com/c/go/+/348738
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
run.go has logic for being able to run tests with various -G flags,
but not all test types (in particular, "asmcheck" tests) support
configuring non-default -G levels. The intention was that these tests
would continue running in the default mode (at the time -G=0), but at
some point it seems like we accidentally disabled them all
together (if it ever worked correctly in the first place).
Fixes#48247.
Change-Id: I13917cb0012cbe522d29b23b888de6136872ead4
Reviewed-on: https://go-review.googlesource.com/c/go/+/348671
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@lowrisc.org>
-G=0 is in maintenance mode, so limit testing it to the longtest
builders.
Change-Id: Ie8a01866b506183d0201f2a3730377cfa663da80
Reviewed-on: https://go-review.googlesource.com/c/go/+/347298
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Currently, if a test explicitly specify -G flag, if that flag conflict
with compiler default -G flag, the test will be skipped. That's the
reason CL 346469 haven't fixed the unified IR stuff, but still make the
unified builder passed.
This CL makes run.go always run the test in unified IR mode, regardless
of the explicit -G flag specified.
Updates #48094
Change-Id: I959ecaff6aca07844f0ffcf36caa60cf0747e8ce
Reviewed-on: https://go-review.googlesource.com/c/go/+/347271
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Required two changes:
- avoid creating a closure in the case where the actual receiver of an
embedded method is not generic even though the base operand of the
selector is generic. This is similar to the test suggested by wayne
zuo - I thought it was clear in buildClosure, and easier to comment.
- Propagate //go:nointerface to base generic methods and then to
instantiations.
Change-Id: If30c834e4223c2639b7f7e74d44e6087aa9ccd76
Reviewed-on: https://go-review.googlesource.com/c/go/+/344251
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Wayne Zuo <wdvxdr1123@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
This CL changes cmd/compile's -G flag's default from 0 to 3, which
enables use of the new types2 type checker and support for type
parameters. The old type checker is still available with
-gcflags=all=-G=0.
The CL also updates the regress test harness to account for the change
in default behavior (e.g., to expect known types2 changes/failures).
However, the -G=0 mode is still being tested for now.
Copy of CL 340914 by danscales@, minus the cmd/internal/objabi.AbsFile
change (handled instead by CL 343731) and rebased to master branch.
Updates #43651.
Change-Id: I1f62d6c0a3ff245e15c5c0e8f3d922129fdd4f29
Reviewed-on: https://go-review.googlesource.com/c/go/+/343732
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is used within Google's internal code repo, so getting it working
is a pre-req for enabling -G=3 by default.
Change-Id: Icbc570948c852ca09cdb2a59f778140f620244b2
Reviewed-on: https://go-review.googlesource.com/c/go/+/343429
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
In this case, we can't use an itab for doing a bound call, since we're
converting from an interface to an interface. We do a static or dynamic
type assert in new function assertToBound().
The dynamic type assert in assertToBound() is only needed if a bound is
parameterized. In that case, we must do a dynamic type assert, and
therefore need a dictionary entry for the type bound (see change in
getGfInfo). I'm not sure if we can somehow limit this case, since using
an interface as a type arg AND having the type bound of the type
arg be parameterized is a very unlikely case.
Had to add the TUNION case to parameterizedBy1() (which is only used for
extra checking).
Added a bunch of these test cases to 13.go, which now passes.
Change-Id: Ic22eed637fa879b5bbb46d36b40aaad6f90b9d01
Reviewed-on: https://go-review.googlesource.com/c/go/+/339898
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Fix the cons.go missing method error. Mark all the methods of
instantiated interface types as used. We could try to record all the
exact methods used for generic interface types, but for now, just mark
all the methods as used so that their methods are not dead-code
eliminated.
Change-Id: I35685eda82476244371379b97691a1b8506ef0f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/337349
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is a partial port of https://golang.org/cl/330629, containing
only the actual bug fix and adjustements to another test file.
The respective test case has not been ported yet as it requires
some bigger adjustments.
For #46905
Change-Id: Ibd20658b8a31855da20cf56e24bcce9560656ca0
Reviewed-on: https://go-review.googlesource.com/c/go/+/336350
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This CL changes fixedbugs/issue30862.go into a "runindir" test so that
it can use '-goexperiment fieldtrack' and test that //go:nointerface
works with cmd/compile. In particular, this revealed that -G=3 and
unified IR did not handle it correctly.
This CL also fixes unified IR's support for //go:nointerface and adds
a test that checks that //go:nointerface, promoted methods, and
generics all interact as expected.
Updates #47045.
Change-Id: Ib8acff8ae18bf124520d00c98e8915699cba2abd
Reviewed-on: https://go-review.googlesource.com/c/go/+/332611
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fixes -G=3 issue with issue44688.go.
Change-Id: Ie98c0cbd48683dedd115332043f14c8f3160f46c
Reviewed-on: https://go-review.googlesource.com/c/go/+/337029
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
This fix the case where a type param or derived type is converted to a
non-empty interface. Previously, we were converting to an empty
interface and then using DOTTYPE to convert to the correct non-empty
interface. In that case, we can get the needed itab directly from the
dictionary. This is needed for correctness from shapes, if the
destination interface is parameterized, else we will incorrectly convert
to the shape version of the interface.
Creating/writing an itab can involve generating wrappers for a bunch of
methods, which may use dictionaries. So, all the
dictionaries/instantiations are being generated on the fly and have
recursive relationships, it is simplest to finish creating/writing the
itabs at the end of the stenciling phase. So, we create a list of the
dictionaries which need to be completed by writing out their itab
entries.
The existing tests ordered.go, ifaceconv.go, and issue44688.go make use
of this optimization.
Got itab conversions for bound calls working, except for 13.go.
Also, want to get rid of the concretify, but I think we need more info
on the Bound from types2.
Change-Id: If552958a7b8a435500d6cc42c401572c367b30d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/336993
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL makes two related changes:
1. It uses 'go env -json' to query the environment configuration,
rather than attempting to manually reconstruct the values that cmd/go
is going to use.
2. It changes the -goexperiment flag to *extend* any ambient
GOEXPERIMENT configuration. Notably, this means that '-goexperiment
fieldtrack' now tests fieldtracking in conjunction with any other
experiments (e.g., unified IR). Tests that want to test an exact
GOEXPERIMENT config should use '-goexperiment none,foo' instead.
Change-Id: I96a97198209e540e934fe7035110c3ae3a8f0e6a
Reviewed-on: https://go-review.googlesource.com/c/go/+/332610
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Removed a case in transformCall() where we were setting a type on n,
which isn't needed, since noder2 already set the type of n. More
importantly, we are losing information, since the type of the results
may be a shape type, but the actual type of call is the known type
from types2, which may be a concrete type (in this case Zero[MyInt]).
That concrete type will then be used correctly if the concrete result is
converted to an interface.
If we are inlining the call to Zero[MyInt], we need to add an implicit
CONVNOP operation, since we are going to use the result variable
directly, which has a shape type. So, add an implicit CONVNOP to
remember that the known type is the concrete type.
Also cleaned up 14.go a bit, so it is more understandable. Renamed type
T to AnyInt, since T is used elsewhere as a type parameter. Reformatted
Zero function and added a comment.
Change-Id: Id917a2e054e0bbae9bd302232853fa8741d49b64
Reviewed-on: https://go-review.googlesource.com/c/go/+/336430
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
METHVALUE in a generic function (that is not called) was not causing
buildClosure() to be called and therefore not using dictionaries. Also,
had to add an extra check to make sure that if we have a FUNCINST
node above a METHVALUE, we only call buildClosure once.
Change-Id: I49756152fc343e5ac1c449e697960fc2a0f482ae
Reviewed-on: https://go-review.googlesource.com/c/go/+/336429
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
We'll have to revisit eventually, but disabling for now.
Change-Id: Ic34cfe451939d61884079bb125b9290db1e05e47
Reviewed-on: https://go-review.googlesource.com/c/go/+/335829
Run-TryBot: Keith Randall <khr@golang.org>
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
- set correct position for closure capture variable in (*irgen).use()
(issue20250.go) Also, evaluate rhs, lhs in that order in assignment
statements to match noder1 (affects ordering of closure variables).
- make sure to set Assign flag properly in (*irgen).forStmt() for range
variables which are map accesses (issue9691.go)
- make sure CheckSize() is call on the base type for top-level types
converted by (*irgen).typ() that are pointer types (issue20174.go and
issue37837.go)
- deal with parentheses properly in validation function
(*irgen).validate() (issue17270.go)
- avoid HasNil call on type TTYPEPARAM - types2 typechecker will have
already checked validity of the typeparam having nil value (new test
issue39755.go)
Change-Id: Ie68004d964698aea047e19e7dcd79b297e9d47ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/334733
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Call SetPos() in g.expr() so it is available for any new nodes.
Print out the actual type for a composite literal in exprFmt() if
available, else use Ntype if available. Seems generally useful, since
the type name is always more useful than just 'composite literal'.
Fixes a bunch of cases that are excluded in run.go for -G=3.
Change-Id: I40b9bba88027ea4f36d419e3989e7f14891bea04
Reviewed-on: https://go-review.googlesource.com/c/go/+/334609
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
types2 currently ignores pragmas, so it does not catch a conversion
error when converting a pointer to a type which is NOT marked notinheap
to a pointer to a convertible type, but which is marked notinheap.
So, we specifically check for this error in transformConv() and report
it during noder2.
Change-Id: I6e9c9ee29f53fa5e490c1ac8306e2191db59eeb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/333369
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
1.go, 12.go: similar to calculating type sizes, we delay computing
instantiations during import until we get up to a top-level type, in
order to make sure recursive types are complete. But we should always
delay calculating sizes when we delay instantiating types, since
otherwise we may try to calculate the size of an incomplete type. So,
needed to add Defer/ResumeCheckSize in (*importReader).typ where we also
defer instantiations. (iimport.go)
2.go: when doing type substition, we have to handle named, parameterized
basic types i.e. the type has a type parameter even though the
underlying type is a basic type that doesn't depend on the parameter.
(subr.go)
3.go: for go 1.18, we allow arbitrary types in interfaces. We had
already allowed union types and tilde types, but didn't allow regular
non-interface types in Go 1.17 for compatibility. Just skip an error
in the case of 1.18. (size.go)
5.go: types2 and types1 differ in how they print out interfaces. types1
puts a space between "interface" and "{", types2 does not. So, since
some typenames come from types2 and some from types1, we need to remove
the space when printing out type arguments. (iimport.go/subr.go)
9.go: in subst.node(), we were missing the KeyExpr case where a node has
no type. The assertion is just there, to make sure we understand all the
cases where there is no type to translate. We could just remove the
whole error check. (stencil.go)
13.go: in subst.node(), missed handling the case where a method
expression is immediate called (which of course, is quite unusual, since
then there's no real reason to have used the method expression syntax in
that case). Just needed to add ir.OMETHEXPR in the OCALL switch
statement. (stencil.go)
Change-Id: I202cbe9541dfafe740e3b84b44982d6181738ea0
Reviewed-on: https://go-review.googlesource.com/c/go/+/333165
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
types2.subst has an assertion that check is non-nil, but which breaks
Instantiate() with an interface type param (used when re-importing
instatiated type to types2). But this check was added when Instantiate()
was added, and things seem to work fine when the assertion is removed.
Fixes test/typeparam/mdempsky/7.go.
Change-Id: I4980f0b202a0b310a3c91a7a87f97576f54911de
Reviewed-on: https://go-review.googlesource.com/c/go/+/333155
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
This allows exporting comparable type bounds, and importing back into
types2 for typechecking.
Fixes typeparam/mdempsky/8.go
Change-Id: I3ee12433df2ed68ac6ef4cad24be9fcdfaaca4e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/333129
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
The (*T).M method expression is where M is a value method, but the type
(*T) is a pointer to the main type. In this case, after following any
embedded fields, we need to add an extra star operator when using the
receiver arg in the closure call.
Thanks to Cuong for finding/pointing out an example for this case
(typeparam/mdempsky/14.go) This example also shows that we now need the
ability to export/import OEFACE and OIDATA, which I added.
Change-Id: Ida0f81ce757fff78fec6276c60052ed71d207454
Reviewed-on: https://go-review.googlesource.com/c/go/+/333014
Run-TryBot: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
This CL includes multiple test cases that exercise unique failures
with -G=3 mode that did not affect unified IR mode. Most of these were
found over a period of about 3 hours of manual experimentation.
Thanks to Cuong Manh Le for test cases 11 and 12.
Updates #46704.
Change-Id: Ia2fa619536732b121b6c929329065c85b9384511
Reviewed-on: https://go-review.googlesource.com/c/go/+/326169
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
This CL changes the existing excluded-test mechanism into a
known-failure mechanism instead. That is, it runs the test regardless,
but only reports if it failed (or succeeded) unexpectedly.
It also splits the known failures list into fine-grain failure lists
for types2, types2 w/ 32-bit target, -G=3, and unified.
Updates #46704.
Change-Id: I1213cbccf1bab6a92d9bfcf0d971a2554249bbff
Reviewed-on: https://go-review.googlesource.com/c/go/+/332551
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Allow fix for issue46725 to work for -G=3 mode.
Change-Id: Id522fbc2278cf878cb3f95b3205a2122c164ae29
Reviewed-on: https://go-review.googlesource.com/c/go/+/331470
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In normal build configurations, we test both -G=0 and -G=3 so that we
can test both typecheck and types2. However, GOEXPERIMENT=unified
always uses types2, so testing both is redundant.
Change-Id: I697d2ad916d8b17cfaf4f0b6b32eec380d4e7906
Reviewed-on: https://go-review.googlesource.com/c/go/+/330755
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Setting `-gcflags=all=-d=unified` works for normal builds/tests, but
seems to have trouble with the test/run.go regress tests. So add a
GOEXPERIMENT knob to allow another way to turn on unified IR
construction, which plays better with all.bash.
While here, update two existing test expectations that currently fail
during GOEXPERIMENT=unified ./all.bash:
1. misc/cgo/errors/testdata/err2.go is testing column positions, and
types2 gets one case slightly better, and another case slightly
worse. For now, the test case is updated to accept both.
2. fixedbugs/issue42284.go is added to the list of known failures,
because it fails for unified IR. (It's an escape analysis test, and
escape analysis is working as expected; but unified is formatting an
imported constant value differently than the test's regexp expects.)
Updates #46786.
Change-Id: I40a4a70fa1b85ac87fcc85a43687f5d81e011ec0
Reviewed-on: https://go-review.googlesource.com/c/go/+/328215
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
