mirror of
https://github.com/espressif/arduino-esp32
synced 2024-09-21 10:28:04 +00:00
41cdbd99b7
The Arduino boards platform framework allows properties of a port to be associated with a board definition. The Arduino development software will identify a port having the associated properties as that board. This should only be done for properties that are unique to the ports produced by that board model. In cases where a board model does not produce a port with properties unique to that model, it is irresponsible to associate those properties with the board definition as this will cause other models to be inappropriately identified. The authors of these board definitions associated them with non-unique USB VID/PID pairs so those associations must be removed. The 303a:1001 VID/PID pair is of the hardware CDC serial port of the native USB ESP32 chips. The others are stock VID/PID pairs of general purpose USB to serial bridge chips that are used on many different board models.
41275 lines
1.9 MiB
41275 lines
1.9 MiB
# Official Espressif options
|
|
menu.UploadSpeed=Upload Speed
|
|
menu.USBMode=USB Mode
|
|
menu.CDCOnBoot=USB CDC On Boot
|
|
menu.MSCOnBoot=USB Firmware MSC On Boot
|
|
menu.DFUOnBoot=USB DFU On Boot
|
|
menu.UploadMode=Upload Mode
|
|
menu.CPUFreq=CPU Frequency
|
|
menu.FlashFreq=Flash Frequency
|
|
menu.FlashMode=Flash Mode
|
|
menu.FlashSize=Flash Size
|
|
menu.PartitionScheme=Partition Scheme
|
|
menu.DebugLevel=Core Debug Level
|
|
menu.PSRAM=PSRAM
|
|
menu.LoopCore=Arduino Runs On
|
|
menu.EventsCore=Events Run On
|
|
menu.MemoryType=Memory Type
|
|
menu.EraseFlash=Erase All Flash Before Sketch Upload
|
|
menu.JTAGAdapter=JTAG Adapter
|
|
menu.ZigbeeMode=Zigbee Mode
|
|
menu.PinNumbers=Pin Numbering
|
|
|
|
# Custom options
|
|
menu.Revision=Board Revision
|
|
menu.LORAWAN_REGION=LoRaWan Region
|
|
menu.LoRaWanDebugLevel=LoRaWan Debug Level
|
|
menu.LORAWAN_DEVEUI=LoRaWan DevEUI
|
|
menu.LORAWAN_PREAMBLE_LENGTH=LoRaWan Preamble Length
|
|
menu.SLOW_CLK_TPYE=Slow Clk Type(only for LoRaWAN)
|
|
menu.einksize=E-Ink Display Size
|
|
menu.NetworkLogLevel=Network Log Level
|
|
##############################################################
|
|
### DO NOT PUT BOARDS ABOVE THE OFFICIAL ESPRESSIF BOARDS! ###
|
|
##############################################################
|
|
|
|
# Generic definition to be used for USB discovery of CDC/JTAG
|
|
esp32_family.name=ESP32 Family Device
|
|
esp32_family.hide=true
|
|
esp32_family.vid.0=0x303a
|
|
esp32_family.pid.0=0x1001
|
|
esp32_family.upload_port.0.vid=0x303a
|
|
esp32_family.upload_port.0.pid=0x1001
|
|
esp32_family.build.board=ESP32_FAMILY
|
|
|
|
##############################################################
|
|
|
|
esp32c2.name=ESP32C2 Dev Module
|
|
esp32c2.hide=true
|
|
|
|
esp32c2.bootloader.tool=esptool_py
|
|
esp32c2.bootloader.tool.default=esptool_py
|
|
|
|
esp32c2.upload.tool=esptool_py
|
|
esp32c2.upload.tool.default=esptool_py
|
|
esp32c2.upload.tool.network=esp_ota
|
|
|
|
esp32c2.upload.maximum_size=1310720
|
|
esp32c2.upload.maximum_data_size=327680
|
|
esp32c2.upload.flags=
|
|
esp32c2.upload.extra_flags=
|
|
esp32c2.upload.use_1200bps_touch=false
|
|
esp32c2.upload.wait_for_upload_port=false
|
|
|
|
esp32c2.serial.disableDTR=false
|
|
esp32c2.serial.disableRTS=false
|
|
|
|
esp32c2.build.tarch=riscv32
|
|
esp32c2.build.target=esp
|
|
esp32c2.build.mcu=esp32c2
|
|
esp32c2.build.core=esp32
|
|
esp32c2.build.variant=esp32c2
|
|
esp32c2.build.board=ESP32C2_DEV
|
|
esp32c2.build.bootloader_addr=0x0
|
|
|
|
esp32c2.build.cdc_on_boot=0
|
|
esp32c2.build.f_cpu=120000000L
|
|
esp32c2.build.flash_size=2MB
|
|
esp32c2.build.flash_freq=60m
|
|
esp32c2.build.flash_mode=qio
|
|
esp32c2.build.boot=qio
|
|
esp32c2.build.partitions=minimal
|
|
esp32c2.build.defines=
|
|
|
|
esp32c2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32c2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32c2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32c2.menu.PartitionScheme.default.build.partitions=default
|
|
esp32c2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32c2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32c2.menu.PartitionScheme.no_fs=No FS 4MB (2MB APP x2)
|
|
esp32c2.menu.PartitionScheme.no_fs.build.partitions=no_fs
|
|
esp32c2.menu.PartitionScheme.no_fs.upload.maximum_size=2031616
|
|
esp32c2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32c2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32c2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32c2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32c2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32c2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32c2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32c2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32c2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32c2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32c2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32c2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32c2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32c2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32c2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32c2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32c2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32c2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
esp32c2.menu.FlashMode.qio=QIO
|
|
esp32c2.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32c2.menu.FlashMode.qio.build.boot=qio
|
|
esp32c2.menu.FlashMode.dio=DIO
|
|
esp32c2.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32c2.menu.FlashMode.dio.build.boot=dio
|
|
|
|
esp32c2.menu.FlashFreq.60=60MHz
|
|
esp32c2.menu.FlashFreq.60.build.flash_freq=60m
|
|
esp32c2.menu.FlashFreq.30=30MHz
|
|
esp32c2.menu.FlashFreq.30.build.flash_freq=30m
|
|
|
|
esp32c2.menu.FlashSize.2M=2MB (16Mb)
|
|
esp32c2.menu.FlashSize.2M.build.flash_size=2MB
|
|
esp32c2.menu.FlashSize.2M.build.partitions=minimal
|
|
esp32c2.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32c2.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
esp32c2.menu.UploadSpeed.921600=921600
|
|
esp32c2.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32c2.menu.UploadSpeed.115200=115200
|
|
esp32c2.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32c2.menu.UploadSpeed.256000.windows=256000
|
|
esp32c2.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32c2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32c2.menu.UploadSpeed.230400=230400
|
|
esp32c2.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32c2.menu.UploadSpeed.460800.linux=460800
|
|
esp32c2.menu.UploadSpeed.460800.macosx=460800
|
|
esp32c2.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32c2.menu.UploadSpeed.512000.windows=512000
|
|
esp32c2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32c2.menu.DebugLevel.none=None
|
|
esp32c2.menu.DebugLevel.none.build.code_debug=0
|
|
esp32c2.menu.DebugLevel.error=Error
|
|
esp32c2.menu.DebugLevel.error.build.code_debug=1
|
|
esp32c2.menu.DebugLevel.warn=Warn
|
|
esp32c2.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32c2.menu.DebugLevel.info=Info
|
|
esp32c2.menu.DebugLevel.info.build.code_debug=3
|
|
esp32c2.menu.DebugLevel.debug=Debug
|
|
esp32c2.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32c2.menu.DebugLevel.verbose=Verbose
|
|
esp32c2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32c2.menu.EraseFlash.none=Disabled
|
|
esp32c2.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32c2.menu.EraseFlash.all=Enabled
|
|
esp32c2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32h2.name=ESP32H2 Dev Module
|
|
|
|
esp32h2.bootloader.tool=esptool_py
|
|
esp32h2.bootloader.tool.default=esptool_py
|
|
|
|
esp32h2.upload.tool=esptool_py
|
|
esp32h2.upload.tool.default=esptool_py
|
|
esp32h2.upload.tool.network=esp_ota
|
|
|
|
esp32h2.upload.maximum_size=1310720
|
|
esp32h2.upload.maximum_data_size=327680
|
|
esp32h2.upload.flags=
|
|
esp32h2.upload.extra_flags=
|
|
esp32h2.upload.use_1200bps_touch=false
|
|
esp32h2.upload.wait_for_upload_port=false
|
|
|
|
esp32h2.serial.disableDTR=false
|
|
esp32h2.serial.disableRTS=false
|
|
|
|
esp32h2.build.tarch=riscv32
|
|
esp32h2.build.target=esp
|
|
esp32h2.build.mcu=esp32h2
|
|
esp32h2.build.core=esp32
|
|
esp32h2.build.variant=esp32h2
|
|
esp32h2.build.board=ESP32H2_DEV
|
|
esp32h2.build.bootloader_addr=0x0
|
|
|
|
esp32h2.build.cdc_on_boot=0
|
|
esp32h2.build.f_cpu=96000000L
|
|
esp32h2.build.flash_size=4MB
|
|
esp32h2.build.flash_freq=64m
|
|
esp32h2.build.img_freq=48m
|
|
esp32h2.build.flash_mode=qio
|
|
esp32h2.build.boot=qio
|
|
esp32h2.build.partitions=default
|
|
esp32h2.build.defines=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
esp32h2.menu.JTAGAdapter.default=Disabled
|
|
esp32h2.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
esp32h2.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
esp32h2.menu.JTAGAdapter.builtin.build.openocdscript=esp32h2-builtin.cfg
|
|
esp32h2.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
esp32h2.menu.JTAGAdapter.external=FTDI Adapter
|
|
esp32h2.menu.JTAGAdapter.external.build.openocdscript=esp32h2-ftdi.cfg
|
|
esp32h2.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
esp32h2.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
esp32h2.menu.JTAGAdapter.bridge.build.openocdscript=esp32h2-bridge.cfg
|
|
esp32h2.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
esp32h2.menu.CDCOnBoot.default=Disabled
|
|
esp32h2.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
esp32h2.menu.CDCOnBoot.cdc=Enabled
|
|
esp32h2.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
esp32h2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32h2.menu.PartitionScheme.default.build.partitions=default
|
|
esp32h2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32h2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32h2.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32h2.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32h2.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32h2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32h2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32h2.menu.PartitionScheme.no_fs=No FS 4MB (2MB APP x2)
|
|
esp32h2.menu.PartitionScheme.no_fs.build.partitions=no_fs
|
|
esp32h2.menu.PartitionScheme.no_fs.upload.maximum_size=2031616
|
|
esp32h2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32h2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32h2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32h2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32h2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32h2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32h2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32h2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32h2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32h2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32h2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32h2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32h2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32h2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32h2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32h2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32h2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32h2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32h2.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32h2.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32h2.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32h2.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32h2.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32h2.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
#esp32h2.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
#esp32h2.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
#esp32h2.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
#esp32h2.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
#esp32h2.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
#esp32h2.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
#esp32h2.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
#esp32h2.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
#esp32h2.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
esp32h2.menu.PartitionScheme.zigbee=Zigbee 4MB with spiffs
|
|
esp32h2.menu.PartitionScheme.zigbee.build.partitions=zigbee
|
|
esp32h2.menu.PartitionScheme.zigbee.upload.maximum_size=1310720
|
|
esp32h2.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
esp32h2.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
esp32h2.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
esp32h2.menu.PartitionScheme.custom=Custom
|
|
esp32h2.menu.PartitionScheme.custom.build.partitions=
|
|
esp32h2.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32h2.menu.FlashMode.qio=QIO
|
|
esp32h2.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32h2.menu.FlashMode.qio.build.boot=qio
|
|
esp32h2.menu.FlashMode.dio=DIO
|
|
esp32h2.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32h2.menu.FlashMode.dio.build.boot=dio
|
|
|
|
esp32h2.menu.FlashFreq.64=64MHz
|
|
esp32h2.menu.FlashFreq.64.build.flash_freq=64m
|
|
esp32h2.menu.FlashFreq.64.build.img_freq=48m
|
|
#esp32h2.menu.FlashFreq.32=32MHz
|
|
#esp32h2.menu.FlashFreq.32.build.flash_freq=32m
|
|
#esp32h2.menu.FlashFreq.32.build.img_freq=24m
|
|
esp32h2.menu.FlashFreq.16=16MHz
|
|
esp32h2.menu.FlashFreq.16.build.flash_freq=16m
|
|
esp32h2.menu.FlashFreq.16.build.img_freq=12m
|
|
|
|
esp32h2.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32h2.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32h2.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32h2.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32h2.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32h2.menu.FlashSize.2M=2MB (16Mb)
|
|
esp32h2.menu.FlashSize.2M.build.flash_size=2MB
|
|
esp32h2.menu.FlashSize.2M.build.partitions=minimal
|
|
esp32h2.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32h2.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
esp32h2.menu.UploadSpeed.921600=921600
|
|
esp32h2.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32h2.menu.UploadSpeed.115200=115200
|
|
esp32h2.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32h2.menu.UploadSpeed.256000.windows=256000
|
|
esp32h2.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32h2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32h2.menu.UploadSpeed.230400=230400
|
|
esp32h2.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32h2.menu.UploadSpeed.460800.linux=460800
|
|
esp32h2.menu.UploadSpeed.460800.macosx=460800
|
|
esp32h2.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32h2.menu.UploadSpeed.512000.windows=512000
|
|
esp32h2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32h2.menu.DebugLevel.none=None
|
|
esp32h2.menu.DebugLevel.none.build.code_debug=0
|
|
esp32h2.menu.DebugLevel.error=Error
|
|
esp32h2.menu.DebugLevel.error.build.code_debug=1
|
|
esp32h2.menu.DebugLevel.warn=Warn
|
|
esp32h2.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32h2.menu.DebugLevel.info=Info
|
|
esp32h2.menu.DebugLevel.info.build.code_debug=3
|
|
esp32h2.menu.DebugLevel.debug=Debug
|
|
esp32h2.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32h2.menu.DebugLevel.verbose=Verbose
|
|
esp32h2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32h2.menu.EraseFlash.none=Disabled
|
|
esp32h2.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32h2.menu.EraseFlash.all=Enabled
|
|
esp32h2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
esp32h2.menu.ZigbeeMode.default=Disabled
|
|
esp32h2.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
esp32h2.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
esp32h2.menu.ZigbeeMode.ed=Zigbee ED (end device)
|
|
esp32h2.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
|
|
esp32h2.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
|
|
esp32h2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
esp32h2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
esp32h2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
esp32h2.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
|
|
esp32h2.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
|
|
esp32h2.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
|
|
|
|
|
|
##############################################################
|
|
|
|
esp32c6.name=ESP32C6 Dev Module
|
|
|
|
esp32c6.bootloader.tool=esptool_py
|
|
esp32c6.bootloader.tool.default=esptool_py
|
|
|
|
esp32c6.upload.tool=esptool_py
|
|
esp32c6.upload.tool.default=esptool_py
|
|
esp32c6.upload.tool.network=esp_ota
|
|
|
|
esp32c6.upload.maximum_size=1310720
|
|
esp32c6.upload.maximum_data_size=327680
|
|
esp32c6.upload.flags=
|
|
esp32c6.upload.extra_flags=
|
|
esp32c6.upload.use_1200bps_touch=false
|
|
esp32c6.upload.wait_for_upload_port=false
|
|
|
|
esp32c6.serial.disableDTR=false
|
|
esp32c6.serial.disableRTS=false
|
|
|
|
esp32c6.build.tarch=riscv32
|
|
esp32c6.build.target=esp
|
|
esp32c6.build.mcu=esp32c6
|
|
esp32c6.build.core=esp32
|
|
esp32c6.build.variant=esp32c6
|
|
esp32c6.build.board=ESP32C6_DEV
|
|
esp32c6.build.bootloader_addr=0x0
|
|
|
|
esp32c6.build.cdc_on_boot=0
|
|
esp32c6.build.f_cpu=160000000L
|
|
esp32c6.build.flash_size=4MB
|
|
esp32c6.build.flash_freq=80m
|
|
esp32c6.build.flash_mode=qio
|
|
esp32c6.build.boot=qio
|
|
esp32c6.build.partitions=default
|
|
esp32c6.build.defines=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
esp32c6.menu.JTAGAdapter.default=Disabled
|
|
esp32c6.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
esp32c6.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
esp32c6.menu.JTAGAdapter.builtin.build.openocdscript=esp32c6-builtin.cfg
|
|
esp32c6.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
esp32c6.menu.JTAGAdapter.external=FTDI Adapter
|
|
esp32c6.menu.JTAGAdapter.external.build.openocdscript=esp32c6-ftdi.cfg
|
|
esp32c6.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
esp32c6.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
esp32c6.menu.JTAGAdapter.bridge.build.openocdscript=esp32c6-bridge.cfg
|
|
esp32c6.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
esp32c6.menu.CDCOnBoot.default=Disabled
|
|
esp32c6.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
esp32c6.menu.CDCOnBoot.cdc=Enabled
|
|
esp32c6.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
esp32c6.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32c6.menu.PartitionScheme.default.build.partitions=default
|
|
esp32c6.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32c6.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32c6.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32c6.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32c6.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32c6.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32c6.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32c6.menu.PartitionScheme.no_fs=No FS 4MB (2MB APP x2)
|
|
esp32c6.menu.PartitionScheme.no_fs.build.partitions=no_fs
|
|
esp32c6.menu.PartitionScheme.no_fs.upload.maximum_size=2031616
|
|
esp32c6.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32c6.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32c6.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32c6.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32c6.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32c6.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32c6.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32c6.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32c6.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32c6.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32c6.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32c6.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32c6.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32c6.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32c6.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32c6.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32c6.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32c6.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32c6.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32c6.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32c6.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32c6.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32c6.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32c6.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
esp32c6.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32c6.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32c6.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32c6.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32c6.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32c6.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32c6.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
esp32c6.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
esp32c6.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
esp32c6.menu.PartitionScheme.zigbee=Zigbee 4MB with spiffs
|
|
esp32c6.menu.PartitionScheme.zigbee.build.partitions=zigbee
|
|
esp32c6.menu.PartitionScheme.zigbee.upload.maximum_size=1310720
|
|
esp32c6.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
esp32c6.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
esp32c6.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
esp32c6.menu.PartitionScheme.custom=Custom
|
|
esp32c6.menu.PartitionScheme.custom.build.partitions=
|
|
esp32c6.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32c6.menu.CPUFreq.160=160MHz (WiFi)
|
|
esp32c6.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32c6.menu.CPUFreq.120=120MHz (WiFi)
|
|
esp32c6.menu.CPUFreq.120.build.f_cpu=120000000L
|
|
esp32c6.menu.CPUFreq.80=80MHz (WiFi)
|
|
esp32c6.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32c6.menu.CPUFreq.40=40MHz
|
|
esp32c6.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32c6.menu.CPUFreq.20=20MHz
|
|
esp32c6.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32c6.menu.CPUFreq.10=10MHz
|
|
esp32c6.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32c6.menu.FlashMode.qio=QIO
|
|
esp32c6.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32c6.menu.FlashMode.qio.build.boot=qio
|
|
esp32c6.menu.FlashMode.dio=DIO
|
|
esp32c6.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32c6.menu.FlashMode.dio.build.boot=dio
|
|
|
|
esp32c6.menu.FlashFreq.80=80MHz
|
|
esp32c6.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32c6.menu.FlashFreq.40=40MHz
|
|
esp32c6.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32c6.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32c6.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32c6.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32c6.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32c6.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32c6.menu.FlashSize.2M=2MB (16Mb)
|
|
esp32c6.menu.FlashSize.2M.build.flash_size=2MB
|
|
esp32c6.menu.FlashSize.2M.build.partitions=minimal
|
|
esp32c6.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32c6.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
esp32c6.menu.UploadSpeed.921600=921600
|
|
esp32c6.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32c6.menu.UploadSpeed.115200=115200
|
|
esp32c6.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32c6.menu.UploadSpeed.256000.windows=256000
|
|
esp32c6.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32c6.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32c6.menu.UploadSpeed.230400=230400
|
|
esp32c6.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32c6.menu.UploadSpeed.460800.linux=460800
|
|
esp32c6.menu.UploadSpeed.460800.macosx=460800
|
|
esp32c6.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32c6.menu.UploadSpeed.512000.windows=512000
|
|
esp32c6.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32c6.menu.DebugLevel.none=None
|
|
esp32c6.menu.DebugLevel.none.build.code_debug=0
|
|
esp32c6.menu.DebugLevel.error=Error
|
|
esp32c6.menu.DebugLevel.error.build.code_debug=1
|
|
esp32c6.menu.DebugLevel.warn=Warn
|
|
esp32c6.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32c6.menu.DebugLevel.info=Info
|
|
esp32c6.menu.DebugLevel.info.build.code_debug=3
|
|
esp32c6.menu.DebugLevel.debug=Debug
|
|
esp32c6.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32c6.menu.DebugLevel.verbose=Verbose
|
|
esp32c6.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32c6.menu.EraseFlash.none=Disabled
|
|
esp32c6.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32c6.menu.EraseFlash.all=Enabled
|
|
esp32c6.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
esp32c6.menu.ZigbeeMode.default=Disabled
|
|
esp32c6.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
esp32c6.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
esp32c6.menu.ZigbeeMode.ed=Zigbee ED (end device)
|
|
esp32c6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
|
|
esp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
|
|
esp32c6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
esp32c6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
esp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
esp32c6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
|
|
esp32c6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
|
|
esp32c6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
esp32s3.name=ESP32S3 Dev Module
|
|
|
|
esp32s3.bootloader.tool=esptool_py
|
|
esp32s3.bootloader.tool.default=esptool_py
|
|
|
|
esp32s3.upload.tool=esptool_py
|
|
esp32s3.upload.tool.default=esptool_py
|
|
esp32s3.upload.tool.network=esp_ota
|
|
|
|
esp32s3.upload.maximum_size=1310720
|
|
esp32s3.upload.maximum_data_size=327680
|
|
esp32s3.upload.flags=
|
|
esp32s3.upload.extra_flags=
|
|
esp32s3.upload.use_1200bps_touch=false
|
|
esp32s3.upload.wait_for_upload_port=false
|
|
|
|
esp32s3.serial.disableDTR=false
|
|
esp32s3.serial.disableRTS=false
|
|
|
|
esp32s3.build.tarch=xtensa
|
|
esp32s3.build.bootloader_addr=0x0
|
|
esp32s3.build.target=esp32s3
|
|
esp32s3.build.mcu=esp32s3
|
|
esp32s3.build.core=esp32
|
|
esp32s3.build.variant=esp32s3
|
|
esp32s3.build.board=ESP32S3_DEV
|
|
|
|
esp32s3.build.usb_mode=1
|
|
esp32s3.build.cdc_on_boot=0
|
|
esp32s3.build.msc_on_boot=0
|
|
esp32s3.build.dfu_on_boot=0
|
|
esp32s3.build.f_cpu=240000000L
|
|
esp32s3.build.flash_size=4MB
|
|
esp32s3.build.flash_freq=80m
|
|
esp32s3.build.flash_mode=dio
|
|
esp32s3.build.boot=qio
|
|
esp32s3.build.boot_freq=80m
|
|
esp32s3.build.partitions=default
|
|
esp32s3.build.defines=
|
|
esp32s3.build.loop_core=
|
|
esp32s3.build.event_core=
|
|
esp32s3.build.psram_type=qspi
|
|
esp32s3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
esp32s3.menu.JTAGAdapter.default=Disabled
|
|
esp32s3.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
esp32s3.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
esp32s3.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
esp32s3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
esp32s3.menu.JTAGAdapter.external=FTDI Adapter
|
|
esp32s3.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
esp32s3.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
esp32s3.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
esp32s3.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
esp32s3.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
esp32s3.menu.PSRAM.disabled=Disabled
|
|
esp32s3.menu.PSRAM.disabled.build.defines=
|
|
esp32s3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
esp32s3.menu.PSRAM.enabled=QSPI PSRAM
|
|
esp32s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
esp32s3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
esp32s3.menu.PSRAM.opi=OPI PSRAM
|
|
esp32s3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
esp32s3.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
esp32s3.menu.FlashMode.qio=QIO 80MHz
|
|
esp32s3.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32s3.menu.FlashMode.qio.build.boot=qio
|
|
esp32s3.menu.FlashMode.qio.build.boot_freq=80m
|
|
esp32s3.menu.FlashMode.qio.build.flash_freq=80m
|
|
esp32s3.menu.FlashMode.qio120=QIO 120MHz
|
|
esp32s3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
esp32s3.menu.FlashMode.qio120.build.boot=qio
|
|
esp32s3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
esp32s3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
esp32s3.menu.FlashMode.dio=DIO 80MHz
|
|
esp32s3.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32s3.menu.FlashMode.dio.build.boot=dio
|
|
esp32s3.menu.FlashMode.dio.build.boot_freq=80m
|
|
esp32s3.menu.FlashMode.dio.build.flash_freq=80m
|
|
esp32s3.menu.FlashMode.opi=OPI 80MHz
|
|
esp32s3.menu.FlashMode.opi.build.flash_mode=dout
|
|
esp32s3.menu.FlashMode.opi.build.boot=opi
|
|
esp32s3.menu.FlashMode.opi.build.boot_freq=80m
|
|
esp32s3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
esp32s3.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32s3.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32s3.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32s3.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32s3.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32s3.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32s3.menu.FlashSize.16M.build.flash_size=16MB
|
|
esp32s3.menu.FlashSize.32M=32MB (256Mb)
|
|
esp32s3.menu.FlashSize.32M.build.flash_size=32MB
|
|
esp32s3.menu.FlashSize.32M.build.partitions=app5M_fat24M_32MB
|
|
|
|
esp32s3.menu.LoopCore.1=Core 1
|
|
esp32s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
esp32s3.menu.LoopCore.0=Core 0
|
|
esp32s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
esp32s3.menu.EventsCore.1=Core 1
|
|
esp32s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
esp32s3.menu.EventsCore.0=Core 0
|
|
esp32s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
esp32s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
esp32s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
esp32s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
esp32s3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
esp32s3.menu.CDCOnBoot.default=Disabled
|
|
esp32s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
esp32s3.menu.CDCOnBoot.cdc=Enabled
|
|
esp32s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
esp32s3.menu.MSCOnBoot.default=Disabled
|
|
esp32s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
esp32s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
esp32s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
esp32s3.menu.DFUOnBoot.default=Disabled
|
|
esp32s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
esp32s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
esp32s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
esp32s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
esp32s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
esp32s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
esp32s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
esp32s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
esp32s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
esp32s3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32s3.menu.PartitionScheme.default.build.partitions=default
|
|
esp32s3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32s3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32s3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32s3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32s3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32s3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32s3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32s3.menu.PartitionScheme.no_fs=No FS 4MB (2MB APP x2)
|
|
esp32s3.menu.PartitionScheme.no_fs.build.partitions=no_fs
|
|
esp32s3.menu.PartitionScheme.no_fs.upload.maximum_size=2031616
|
|
esp32s3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32s3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32s3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32s3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32s3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32s3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32s3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32s3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32s3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32s3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32s3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32s3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32s3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32s3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32s3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32s3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32s3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32s3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32s3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32s3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32s3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32s3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32s3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32s3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
esp32s3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32s3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32s3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32s3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32s3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32s3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32s3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
esp32s3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
esp32s3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
esp32s3.menu.PartitionScheme.app5M_fat24M_32MB=32M Flash (4.8MB APP/22MB FATFS)
|
|
esp32s3.menu.PartitionScheme.app5M_fat24M_32MB.build.partitions=large_fat_32MB
|
|
esp32s3.menu.PartitionScheme.app5M_fat24M_32MB.upload.maximum_size=4718592
|
|
esp32s3.menu.PartitionScheme.app5M_little24M_32MB=32M Flash (4.8MB APP/22MB LittleFS)
|
|
esp32s3.menu.PartitionScheme.app5M_little24M_32MB.build.partitions=large_littlefs_32MB
|
|
esp32s3.menu.PartitionScheme.app5M_little24M_32MB.upload.maximum_size=4718592
|
|
esp32s3.menu.PartitionScheme.esp_sr_16=ESP SR 16M (3MB APP/7MB SPIFFS/2.9MB MODEL)
|
|
esp32s3.menu.PartitionScheme.esp_sr_16.upload.maximum_size=3145728
|
|
esp32s3.menu.PartitionScheme.esp_sr_16.upload.extra_flags=0xD10000 {build.path}/srmodels.bin
|
|
esp32s3.menu.PartitionScheme.esp_sr_16.build.partitions=esp_sr_16
|
|
esp32s3.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
esp32s3.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
esp32s3.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
esp32s3.menu.PartitionScheme.custom=Custom
|
|
esp32s3.menu.PartitionScheme.custom.build.partitions=
|
|
esp32s3.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
esp32s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
esp32s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
esp32s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
esp32s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32s3.menu.CPUFreq.40=40MHz
|
|
esp32s3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32s3.menu.CPUFreq.20=20MHz
|
|
esp32s3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32s3.menu.CPUFreq.10=10MHz
|
|
esp32s3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32s3.menu.UploadSpeed.921600=921600
|
|
esp32s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32s3.menu.UploadSpeed.115200=115200
|
|
esp32s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32s3.menu.UploadSpeed.256000.windows=256000
|
|
esp32s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32s3.menu.UploadSpeed.230400=230400
|
|
esp32s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32s3.menu.UploadSpeed.460800.linux=460800
|
|
esp32s3.menu.UploadSpeed.460800.macosx=460800
|
|
esp32s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32s3.menu.UploadSpeed.512000.windows=512000
|
|
esp32s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32s3.menu.DebugLevel.none=None
|
|
esp32s3.menu.DebugLevel.none.build.code_debug=0
|
|
esp32s3.menu.DebugLevel.error=Error
|
|
esp32s3.menu.DebugLevel.error.build.code_debug=1
|
|
esp32s3.menu.DebugLevel.warn=Warn
|
|
esp32s3.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32s3.menu.DebugLevel.info=Info
|
|
esp32s3.menu.DebugLevel.info.build.code_debug=3
|
|
esp32s3.menu.DebugLevel.debug=Debug
|
|
esp32s3.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32s3.menu.DebugLevel.verbose=Verbose
|
|
esp32s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32s3.menu.EraseFlash.none=Disabled
|
|
esp32s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32s3.menu.EraseFlash.all=Enabled
|
|
esp32s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
esp32s3.menu.ZigbeeMode.default=Disabled
|
|
esp32s3.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
esp32s3.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
esp32s3.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
esp32s3.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
esp32s3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
esp32c3.name=ESP32C3 Dev Module
|
|
|
|
esp32c3.bootloader.tool=esptool_py
|
|
esp32c3.bootloader.tool.default=esptool_py
|
|
|
|
esp32c3.upload.tool=esptool_py
|
|
esp32c3.upload.tool.default=esptool_py
|
|
esp32c3.upload.tool.network=esp_ota
|
|
|
|
esp32c3.upload.maximum_size=1310720
|
|
esp32c3.upload.maximum_data_size=327680
|
|
esp32c3.upload.flags=
|
|
esp32c3.upload.extra_flags=
|
|
esp32c3.upload.use_1200bps_touch=false
|
|
esp32c3.upload.wait_for_upload_port=false
|
|
|
|
esp32c3.serial.disableDTR=false
|
|
esp32c3.serial.disableRTS=false
|
|
|
|
esp32c3.build.tarch=riscv32
|
|
esp32c3.build.target=esp
|
|
esp32c3.build.mcu=esp32c3
|
|
esp32c3.build.core=esp32
|
|
esp32c3.build.variant=esp32c3
|
|
esp32c3.build.board=ESP32C3_DEV
|
|
esp32c3.build.bootloader_addr=0x0
|
|
|
|
esp32c3.build.cdc_on_boot=0
|
|
esp32c3.build.f_cpu=160000000L
|
|
esp32c3.build.flash_size=4MB
|
|
esp32c3.build.flash_freq=80m
|
|
esp32c3.build.flash_mode=qio
|
|
esp32c3.build.boot=qio
|
|
esp32c3.build.partitions=default
|
|
esp32c3.build.defines=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
esp32c3.menu.JTAGAdapter.default=Disabled
|
|
esp32c3.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
esp32c3.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
esp32c3.menu.JTAGAdapter.builtin.build.openocdscript=esp32c3-builtin.cfg
|
|
esp32c3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
esp32c3.menu.JTAGAdapter.external=FTDI Adapter
|
|
esp32c3.menu.JTAGAdapter.external.build.openocdscript=esp32c3-ftdi.cfg
|
|
esp32c3.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
esp32c3.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
esp32c3.menu.JTAGAdapter.bridge.build.openocdscript=esp32c3-bridge.cfg
|
|
esp32c3.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
esp32c3.menu.CDCOnBoot.default=Disabled
|
|
esp32c3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
esp32c3.menu.CDCOnBoot.cdc=Enabled
|
|
esp32c3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
esp32c3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32c3.menu.PartitionScheme.default.build.partitions=default
|
|
esp32c3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32c3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32c3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32c3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32c3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32c3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32c3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32c3.menu.PartitionScheme.no_fs=No FS 4MB (2MB APP x2)
|
|
esp32c3.menu.PartitionScheme.no_fs.build.partitions=no_fs
|
|
esp32c3.menu.PartitionScheme.no_fs.upload.maximum_size=2031616
|
|
esp32c3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32c3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32c3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32c3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32c3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32c3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32c3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32c3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32c3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32c3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32c3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32c3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32c3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32c3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32c3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32c3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32c3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32c3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32c3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32c3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32c3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32c3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32c3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32c3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
esp32c3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32c3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32c3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32c3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32c3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32c3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32c3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
esp32c3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
esp32c3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
esp32c3.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
esp32c3.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
esp32c3.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
esp32c3.menu.PartitionScheme.custom=Custom
|
|
esp32c3.menu.PartitionScheme.custom.build.partitions=
|
|
esp32c3.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32c3.menu.CPUFreq.160=160MHz (WiFi)
|
|
esp32c3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32c3.menu.CPUFreq.80=80MHz (WiFi)
|
|
esp32c3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32c3.menu.CPUFreq.40=40MHz
|
|
esp32c3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32c3.menu.CPUFreq.20=20MHz
|
|
esp32c3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32c3.menu.CPUFreq.10=10MHz
|
|
esp32c3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32c3.menu.FlashMode.qio=QIO
|
|
esp32c3.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32c3.menu.FlashMode.qio.build.boot=qio
|
|
esp32c3.menu.FlashMode.dio=DIO
|
|
esp32c3.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32c3.menu.FlashMode.dio.build.boot=dio
|
|
|
|
esp32c3.menu.FlashFreq.80=80MHz
|
|
esp32c3.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32c3.menu.FlashFreq.40=40MHz
|
|
esp32c3.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32c3.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32c3.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32c3.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32c3.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32c3.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32c3.menu.FlashSize.2M=2MB (16Mb)
|
|
esp32c3.menu.FlashSize.2M.build.flash_size=2MB
|
|
esp32c3.menu.FlashSize.2M.build.partitions=minimal
|
|
esp32c3.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32c3.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
esp32c3.menu.UploadSpeed.921600=921600
|
|
esp32c3.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32c3.menu.UploadSpeed.115200=115200
|
|
esp32c3.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32c3.menu.UploadSpeed.256000.windows=256000
|
|
esp32c3.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32c3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32c3.menu.UploadSpeed.230400=230400
|
|
esp32c3.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32c3.menu.UploadSpeed.460800.linux=460800
|
|
esp32c3.menu.UploadSpeed.460800.macosx=460800
|
|
esp32c3.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32c3.menu.UploadSpeed.512000.windows=512000
|
|
esp32c3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32c3.menu.DebugLevel.none=None
|
|
esp32c3.menu.DebugLevel.none.build.code_debug=0
|
|
esp32c3.menu.DebugLevel.error=Error
|
|
esp32c3.menu.DebugLevel.error.build.code_debug=1
|
|
esp32c3.menu.DebugLevel.warn=Warn
|
|
esp32c3.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32c3.menu.DebugLevel.info=Info
|
|
esp32c3.menu.DebugLevel.info.build.code_debug=3
|
|
esp32c3.menu.DebugLevel.debug=Debug
|
|
esp32c3.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32c3.menu.DebugLevel.verbose=Verbose
|
|
esp32c3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32c3.menu.EraseFlash.none=Disabled
|
|
esp32c3.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32c3.menu.EraseFlash.all=Enabled
|
|
esp32c3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
esp32c3.menu.ZigbeeMode.default=Disabled
|
|
esp32c3.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
esp32c3.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
esp32c3.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
esp32c3.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
esp32c3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
esp32s2.name=ESP32S2 Dev Module
|
|
esp32s2.vid.0=0x303a
|
|
esp32s2.pid.0=0x0002
|
|
esp32s2.upload_port.vid.0=0x303a
|
|
esp32s2.upload_port.pid.0=0x0002
|
|
|
|
esp32s2.bootloader.tool=esptool_py
|
|
esp32s2.bootloader.tool.default=esptool_py
|
|
|
|
esp32s2.upload.tool=esptool_py
|
|
esp32s2.upload.tool.default=esptool_py
|
|
esp32s2.upload.tool.network=esp_ota
|
|
|
|
esp32s2.upload.maximum_size=1310720
|
|
esp32s2.upload.maximum_data_size=327680
|
|
esp32s2.upload.flags=
|
|
esp32s2.upload.extra_flags=
|
|
esp32s2.upload.use_1200bps_touch=false
|
|
esp32s2.upload.wait_for_upload_port=false
|
|
|
|
esp32s2.serial.disableDTR=false
|
|
esp32s2.serial.disableRTS=false
|
|
|
|
esp32s2.build.tarch=xtensa
|
|
esp32s2.build.bootloader_addr=0x1000
|
|
esp32s2.build.target=esp32s2
|
|
esp32s2.build.mcu=esp32s2
|
|
esp32s2.build.core=esp32
|
|
esp32s2.build.variant=esp32s2
|
|
esp32s2.build.board=ESP32S2_DEV
|
|
|
|
esp32s2.build.cdc_on_boot=0
|
|
esp32s2.build.msc_on_boot=0
|
|
esp32s2.build.dfu_on_boot=0
|
|
esp32s2.build.f_cpu=240000000L
|
|
esp32s2.build.flash_size=4MB
|
|
esp32s2.build.flash_freq=80m
|
|
esp32s2.build.flash_mode=dio
|
|
esp32s2.build.boot=qio
|
|
esp32s2.build.partitions=default
|
|
esp32s2.build.defines=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
esp32s2.menu.JTAGAdapter.default=Disabled
|
|
esp32s2.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
esp32s2.menu.JTAGAdapter.external=FTDI Adapter
|
|
esp32s2.menu.JTAGAdapter.external.build.openocdscript=esp32s2-kaluga-1.cfg
|
|
esp32s2.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
esp32s2.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
esp32s2.menu.JTAGAdapter.bridge.build.openocdscript=esp32s2-bridge.cfg
|
|
esp32s2.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
esp32s2.menu.CDCOnBoot.default=Disabled
|
|
esp32s2.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
esp32s2.menu.CDCOnBoot.cdc=Enabled
|
|
esp32s2.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
esp32s2.menu.MSCOnBoot.default=Disabled
|
|
esp32s2.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
esp32s2.menu.MSCOnBoot.msc=Enabled
|
|
esp32s2.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
esp32s2.menu.DFUOnBoot.default=Disabled
|
|
esp32s2.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
esp32s2.menu.DFUOnBoot.dfu=Enabled
|
|
esp32s2.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
esp32s2.menu.UploadMode.default=UART0
|
|
esp32s2.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
esp32s2.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
esp32s2.menu.UploadMode.cdc=Internal USB
|
|
esp32s2.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
esp32s2.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
esp32s2.menu.PSRAM.disabled=Disabled
|
|
esp32s2.menu.PSRAM.disabled.build.defines=
|
|
esp32s2.menu.PSRAM.enabled=Enabled
|
|
esp32s2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
|
|
esp32s2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32s2.menu.PartitionScheme.default.build.partitions=default
|
|
esp32s2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32s2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32s2.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32s2.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32s2.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32s2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32s2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32s2.menu.PartitionScheme.no_fs=No FS 4MB (2MB APP x2)
|
|
esp32s2.menu.PartitionScheme.no_fs.build.partitions=no_fs
|
|
esp32s2.menu.PartitionScheme.no_fs.upload.maximum_size=2031616
|
|
esp32s2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32s2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32s2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32s2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32s2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32s2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32s2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32s2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32s2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32s2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32s2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32s2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32s2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32s2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32s2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32s2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32s2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32s2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32s2.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32s2.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32s2.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32s2.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32s2.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32s2.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
esp32s2.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32s2.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32s2.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32s2.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32s2.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32s2.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32s2.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
esp32s2.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
esp32s2.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
esp32s2.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
esp32s2.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
esp32s2.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
esp32s2.menu.PartitionScheme.custom=Custom
|
|
esp32s2.menu.PartitionScheme.custom.build.partitions=
|
|
esp32s2.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32s2.menu.CPUFreq.240=240MHz (WiFi)
|
|
esp32s2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
esp32s2.menu.CPUFreq.160=160MHz (WiFi)
|
|
esp32s2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32s2.menu.CPUFreq.80=80MHz (WiFi)
|
|
esp32s2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32s2.menu.CPUFreq.40=40MHz
|
|
esp32s2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32s2.menu.CPUFreq.20=20MHz
|
|
esp32s2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32s2.menu.CPUFreq.10=10MHz
|
|
esp32s2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32s2.menu.FlashMode.qio=QIO
|
|
esp32s2.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32s2.menu.FlashMode.qio.build.boot=qio
|
|
esp32s2.menu.FlashMode.dio=DIO
|
|
esp32s2.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32s2.menu.FlashMode.dio.build.boot=dio
|
|
|
|
esp32s2.menu.FlashFreq.80=80MHz
|
|
esp32s2.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32s2.menu.FlashFreq.40=40MHz
|
|
esp32s2.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32s2.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32s2.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32s2.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32s2.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32s2.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32s2.menu.FlashSize.2M=2MB (16Mb)
|
|
esp32s2.menu.FlashSize.2M.build.flash_size=2MB
|
|
esp32s2.menu.FlashSize.2M.build.partitions=minimal
|
|
esp32s2.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32s2.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
esp32s2.menu.UploadSpeed.921600=921600
|
|
esp32s2.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32s2.menu.UploadSpeed.115200=115200
|
|
esp32s2.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32s2.menu.UploadSpeed.256000.windows=256000
|
|
esp32s2.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32s2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32s2.menu.UploadSpeed.230400=230400
|
|
esp32s2.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32s2.menu.UploadSpeed.460800.linux=460800
|
|
esp32s2.menu.UploadSpeed.460800.macosx=460800
|
|
esp32s2.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32s2.menu.UploadSpeed.512000.windows=512000
|
|
esp32s2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32s2.menu.DebugLevel.none=None
|
|
esp32s2.menu.DebugLevel.none.build.code_debug=0
|
|
esp32s2.menu.DebugLevel.error=Error
|
|
esp32s2.menu.DebugLevel.error.build.code_debug=1
|
|
esp32s2.menu.DebugLevel.warn=Warn
|
|
esp32s2.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32s2.menu.DebugLevel.info=Info
|
|
esp32s2.menu.DebugLevel.info.build.code_debug=3
|
|
esp32s2.menu.DebugLevel.debug=Debug
|
|
esp32s2.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32s2.menu.DebugLevel.verbose=Verbose
|
|
esp32s2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32s2.menu.EraseFlash.none=Disabled
|
|
esp32s2.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32s2.menu.EraseFlash.all=Enabled
|
|
esp32s2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
esp32s2.menu.ZigbeeMode.default=Disabled
|
|
esp32s2.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
esp32s2.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
esp32s2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
esp32s2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
esp32.name=ESP32 Dev Module
|
|
|
|
esp32.bootloader.tool=esptool_py
|
|
esp32.bootloader.tool.default=esptool_py
|
|
|
|
esp32.upload.tool=esptool_py
|
|
esp32.upload.tool.default=esptool_py
|
|
esp32.upload.tool.network=esp_ota
|
|
|
|
esp32.upload.maximum_size=1310720
|
|
esp32.upload.maximum_data_size=327680
|
|
esp32.upload.flags=
|
|
esp32.upload.extra_flags=
|
|
|
|
esp32.serial.disableDTR=true
|
|
esp32.serial.disableRTS=true
|
|
|
|
esp32.build.tarch=xtensa
|
|
esp32.build.bootloader_addr=0x1000
|
|
esp32.build.target=esp32
|
|
esp32.build.mcu=esp32
|
|
esp32.build.core=esp32
|
|
esp32.build.variant=esp32
|
|
esp32.build.board=ESP32_DEV
|
|
|
|
esp32.build.f_cpu=240000000L
|
|
esp32.build.flash_size=4MB
|
|
esp32.build.flash_freq=40m
|
|
esp32.build.flash_mode=dio
|
|
esp32.build.boot=dio
|
|
esp32.build.partitions=default
|
|
esp32.build.defines=
|
|
esp32.build.loop_core=
|
|
esp32.build.event_core=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
esp32.menu.JTAGAdapter.default=Disabled
|
|
esp32.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
esp32.menu.JTAGAdapter.external=FTDI Adapter
|
|
esp32.menu.JTAGAdapter.external.build.openocdscript=esp32-wrover-kit-3.3v.cfg
|
|
esp32.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
esp32.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
esp32.menu.JTAGAdapter.bridge.build.openocdscript=esp32-bridge.cfg
|
|
esp32.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
esp32.menu.PSRAM.disabled=Disabled
|
|
esp32.menu.PSRAM.disabled.build.defines=
|
|
esp32.menu.PSRAM.disabled.build.extra_libs=
|
|
esp32.menu.PSRAM.enabled=Enabled
|
|
esp32.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
esp32.menu.PSRAM.enabled.build.extra_libs=
|
|
|
|
esp32.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32.menu.PartitionScheme.default.build.partitions=default
|
|
esp32.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32.menu.PartitionScheme.no_fs=No FS 4MB (2MB APP x2)
|
|
esp32.menu.PartitionScheme.no_fs.build.partitions=no_fs
|
|
esp32.menu.PartitionScheme.no_fs.upload.maximum_size=2031616
|
|
esp32.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
esp32.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
esp32.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
esp32.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
esp32.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
esp32.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
esp32.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
esp32.menu.PartitionScheme.custom=Custom
|
|
esp32.menu.PartitionScheme.custom.build.partitions=
|
|
esp32.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
esp32.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
esp32.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
esp32.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
esp32.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
esp32.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
esp32.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
esp32.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
esp32.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
esp32.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
esp32.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
esp32.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32.menu.FlashMode.qio=QIO
|
|
esp32.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32.menu.FlashMode.qio.build.boot=qio
|
|
esp32.menu.FlashMode.dio=DIO
|
|
esp32.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32.menu.FlashMode.dio.build.boot=dio
|
|
|
|
esp32.menu.FlashFreq.80=80MHz
|
|
esp32.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32.menu.FlashFreq.40=40MHz
|
|
esp32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32.menu.FlashSize.2M=2MB (16Mb)
|
|
esp32.menu.FlashSize.2M.build.flash_size=2MB
|
|
esp32.menu.FlashSize.2M.build.partitions=minimal
|
|
esp32.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
esp32.menu.UploadSpeed.921600=921600
|
|
esp32.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32.menu.UploadSpeed.115200=115200
|
|
esp32.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32.menu.UploadSpeed.256000.windows=256000
|
|
esp32.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32.menu.UploadSpeed.230400=230400
|
|
esp32.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32.menu.UploadSpeed.460800.linux=460800
|
|
esp32.menu.UploadSpeed.460800.macosx=460800
|
|
esp32.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32.menu.UploadSpeed.512000.windows=512000
|
|
esp32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32.menu.LoopCore.1=Core 1
|
|
esp32.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
esp32.menu.LoopCore.0=Core 0
|
|
esp32.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
esp32.menu.EventsCore.1=Core 1
|
|
esp32.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
esp32.menu.EventsCore.0=Core 0
|
|
esp32.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
esp32.menu.DebugLevel.none=None
|
|
esp32.menu.DebugLevel.none.build.code_debug=0
|
|
esp32.menu.DebugLevel.error=Error
|
|
esp32.menu.DebugLevel.error.build.code_debug=1
|
|
esp32.menu.DebugLevel.warn=Warn
|
|
esp32.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32.menu.DebugLevel.info=Info
|
|
esp32.menu.DebugLevel.info.build.code_debug=3
|
|
esp32.menu.DebugLevel.debug=Debug
|
|
esp32.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32.menu.DebugLevel.verbose=Verbose
|
|
esp32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32.menu.EraseFlash.none=Disabled
|
|
esp32.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32.menu.EraseFlash.all=Enabled
|
|
esp32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
esp32.menu.ZigbeeMode.default=Disabled
|
|
esp32.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
esp32.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
esp32.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
esp32.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
esp32.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
esp32da.name=ESP32-WROOM-DA Module
|
|
|
|
esp32da.bootloader.tool=esptool_py
|
|
esp32da.bootloader.tool.default=esptool_py
|
|
|
|
esp32da.upload.tool=esptool_py
|
|
esp32da.upload.tool.default=esptool_py
|
|
esp32da.upload.tool.network=esp_ota
|
|
|
|
esp32da.upload.maximum_size=1310720
|
|
esp32da.upload.maximum_data_size=327680
|
|
esp32da.upload.flags=
|
|
esp32da.upload.extra_flags=
|
|
|
|
esp32da.serial.disableDTR=true
|
|
esp32da.serial.disableRTS=true
|
|
|
|
esp32da.build.tarch=xtensa
|
|
esp32da.build.bootloader_addr=0x1000
|
|
esp32da.build.target=esp32
|
|
esp32da.build.mcu=esp32
|
|
esp32da.build.core=esp32
|
|
esp32da.build.variant=esp32da
|
|
esp32da.build.board=ESP32_WROOM_DA
|
|
|
|
esp32da.build.f_cpu=240000000L
|
|
esp32da.build.flash_size=4MB
|
|
esp32da.build.flash_freq=40m
|
|
esp32da.build.flash_mode=dio
|
|
esp32da.build.boot=dio
|
|
esp32da.build.partitions=default
|
|
esp32da.build.defines=
|
|
esp32da.build.loop_core=
|
|
esp32da.build.event_core=
|
|
|
|
esp32da.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32da.menu.PartitionScheme.default.build.partitions=default
|
|
esp32da.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32da.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32da.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32da.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32da.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32da.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32da.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32da.menu.PartitionScheme.no_fs=No FS 4MB (2MB APP x2)
|
|
esp32da.menu.PartitionScheme.no_fs.build.partitions=no_fs
|
|
esp32da.menu.PartitionScheme.no_fs.upload.maximum_size=2031616
|
|
esp32da.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32da.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32da.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32da.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32da.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32da.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32da.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32da.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32da.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32da.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32da.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32da.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32da.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32da.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32da.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32da.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32da.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32da.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32da.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32da.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32da.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32da.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32da.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32da.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
esp32da.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32da.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32da.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32da.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32da.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32da.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32da.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
esp32da.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
esp32da.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
esp32da.menu.PartitionScheme.custom=Custom
|
|
esp32da.menu.PartitionScheme.custom.build.partitions=
|
|
esp32da.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32da.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
esp32da.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
esp32da.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
esp32da.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32da.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
esp32da.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32da.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
esp32da.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32da.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
esp32da.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
esp32da.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
esp32da.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32da.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
esp32da.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
esp32da.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
esp32da.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32da.menu.FlashMode.qio=QIO
|
|
esp32da.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32da.menu.FlashMode.qio.build.boot=qio
|
|
esp32da.menu.FlashMode.dio=DIO
|
|
esp32da.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32da.menu.FlashMode.dio.build.boot=dio
|
|
|
|
esp32da.menu.FlashFreq.80=80MHz
|
|
esp32da.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32da.menu.FlashFreq.40=40MHz
|
|
esp32da.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32da.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32da.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32da.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32da.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32da.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32da.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32da.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
esp32da.menu.UploadSpeed.921600=921600
|
|
esp32da.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32da.menu.UploadSpeed.115200=115200
|
|
esp32da.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32da.menu.UploadSpeed.256000.windows=256000
|
|
esp32da.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32da.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32da.menu.UploadSpeed.230400=230400
|
|
esp32da.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32da.menu.UploadSpeed.460800.linux=460800
|
|
esp32da.menu.UploadSpeed.460800.macosx=460800
|
|
esp32da.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32da.menu.UploadSpeed.512000.windows=512000
|
|
esp32da.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32da.menu.LoopCore.1=Core 1
|
|
esp32da.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
esp32da.menu.LoopCore.0=Core 0
|
|
esp32da.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
esp32da.menu.EventsCore.1=Core 1
|
|
esp32da.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
esp32da.menu.EventsCore.0=Core 0
|
|
esp32da.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
esp32da.menu.DebugLevel.none=None
|
|
esp32da.menu.DebugLevel.none.build.code_debug=0
|
|
esp32da.menu.DebugLevel.error=Error
|
|
esp32da.menu.DebugLevel.error.build.code_debug=1
|
|
esp32da.menu.DebugLevel.warn=Warn
|
|
esp32da.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32da.menu.DebugLevel.info=Info
|
|
esp32da.menu.DebugLevel.info.build.code_debug=3
|
|
esp32da.menu.DebugLevel.debug=Debug
|
|
esp32da.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32da.menu.DebugLevel.verbose=Verbose
|
|
esp32da.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32da.menu.EraseFlash.none=Disabled
|
|
esp32da.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32da.menu.EraseFlash.all=Enabled
|
|
esp32da.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32wrover.name=ESP32 Wrover Module
|
|
|
|
esp32wrover.bootloader.tool=esptool_py
|
|
esp32wrover.bootloader.tool.default=esptool_py
|
|
|
|
esp32wrover.upload.tool=esptool_py
|
|
esp32wrover.upload.tool.default=esptool_py
|
|
esp32wrover.upload.tool.network=esp_ota
|
|
|
|
esp32wrover.upload.maximum_size=1310720
|
|
esp32wrover.upload.maximum_data_size=327680
|
|
esp32wrover.upload.flags=
|
|
esp32wrover.upload.extra_flags=
|
|
|
|
esp32wrover.serial.disableDTR=true
|
|
esp32wrover.serial.disableRTS=true
|
|
|
|
esp32wrover.build.tarch=xtensa
|
|
esp32wrover.build.bootloader_addr=0x1000
|
|
esp32wrover.build.target=esp32
|
|
esp32wrover.build.mcu=esp32
|
|
esp32wrover.build.core=esp32
|
|
esp32wrover.build.variant=esp32
|
|
esp32wrover.build.board=ESP32_DEV
|
|
|
|
esp32wrover.build.f_cpu=240000000L
|
|
esp32wrover.build.flash_size=4MB
|
|
esp32wrover.build.flash_freq=40m
|
|
esp32wrover.build.flash_mode=dio
|
|
esp32wrover.build.boot=dio
|
|
esp32wrover.build.partitions=default
|
|
esp32wrover.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
esp32wrover.build.extra_libs=
|
|
|
|
esp32wrover.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32wrover.menu.PartitionScheme.default.build.partitions=default
|
|
esp32wrover.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32wrover.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32wrover.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32wrover.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32wrover.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32wrover.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32wrover.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32wrover.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32wrover.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32wrover.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32wrover.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32wrover.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32wrover.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32wrover.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32wrover.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32wrover.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32wrover.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32wrover.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32wrover.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32wrover.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32wrover.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32wrover.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32wrover.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32wrover.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32wrover.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32wrover.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32wrover.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32wrover.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32wrover.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32wrover.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32wrover.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32wrover.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32wrover.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32wrover.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32wrover.menu.PartitionScheme.custom=Custom
|
|
esp32wrover.menu.PartitionScheme.custom.build.partitions=
|
|
esp32wrover.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32wrover.menu.FlashMode.qio=QIO
|
|
esp32wrover.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32wrover.menu.FlashMode.qio.build.boot=qio
|
|
esp32wrover.menu.FlashMode.dio=DIO
|
|
esp32wrover.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32wrover.menu.FlashMode.dio.build.boot=dio
|
|
|
|
esp32wrover.menu.FlashFreq.80=80MHz
|
|
esp32wrover.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32wrover.menu.FlashFreq.40=40MHz
|
|
esp32wrover.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32wrover.menu.UploadSpeed.921600=921600
|
|
esp32wrover.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32wrover.menu.UploadSpeed.115200=115200
|
|
esp32wrover.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32wrover.menu.UploadSpeed.256000.windows=256000
|
|
esp32wrover.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32wrover.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32wrover.menu.UploadSpeed.230400=230400
|
|
esp32wrover.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32wrover.menu.UploadSpeed.460800.linux=460800
|
|
esp32wrover.menu.UploadSpeed.460800.macosx=460800
|
|
esp32wrover.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32wrover.menu.UploadSpeed.512000.windows=512000
|
|
esp32wrover.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32wrover.menu.DebugLevel.none=None
|
|
esp32wrover.menu.DebugLevel.none.build.code_debug=0
|
|
esp32wrover.menu.DebugLevel.error=Error
|
|
esp32wrover.menu.DebugLevel.error.build.code_debug=1
|
|
esp32wrover.menu.DebugLevel.warn=Warn
|
|
esp32wrover.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32wrover.menu.DebugLevel.info=Info
|
|
esp32wrover.menu.DebugLevel.info.build.code_debug=3
|
|
esp32wrover.menu.DebugLevel.debug=Debug
|
|
esp32wrover.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32wrover.menu.DebugLevel.verbose=Verbose
|
|
esp32wrover.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32wrover.menu.EraseFlash.none=Disabled
|
|
esp32wrover.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32wrover.menu.EraseFlash.all=Enabled
|
|
esp32wrover.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
pico32.name=ESP32 PICO-D4
|
|
|
|
pico32.bootloader.tool=esptool_py
|
|
pico32.bootloader.tool.default=esptool_py
|
|
|
|
pico32.upload.tool=esptool_py
|
|
pico32.upload.tool.default=esptool_py
|
|
pico32.upload.tool.network=esp_ota
|
|
|
|
pico32.upload.maximum_size=1310720
|
|
pico32.upload.maximum_data_size=327680
|
|
pico32.upload.flags=
|
|
pico32.upload.extra_flags=
|
|
|
|
pico32.serial.disableDTR=true
|
|
pico32.serial.disableRTS=true
|
|
|
|
pico32.build.tarch=xtensa
|
|
pico32.build.bootloader_addr=0x1000
|
|
pico32.build.target=esp32
|
|
pico32.build.mcu=esp32
|
|
pico32.build.core=esp32
|
|
pico32.build.variant=pico32
|
|
pico32.build.board=ESP32_PICO
|
|
|
|
pico32.build.f_cpu=240000000L
|
|
pico32.build.flash_size=4MB
|
|
pico32.build.flash_freq=80m
|
|
pico32.build.flash_mode=dio
|
|
pico32.build.boot=dio
|
|
pico32.build.partitions=default
|
|
pico32.build.defines=
|
|
|
|
pico32.menu.PartitionScheme.default=Default
|
|
pico32.menu.PartitionScheme.default.build.partitions=default
|
|
pico32.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
pico32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
pico32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
pico32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
pico32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
pico32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
pico32.menu.PartitionScheme.custom=Custom
|
|
pico32.menu.PartitionScheme.custom.build.partitions=
|
|
pico32.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
pico32.menu.UploadSpeed.921600=921600
|
|
pico32.menu.UploadSpeed.921600.upload.speed=921600
|
|
pico32.menu.UploadSpeed.115200=115200
|
|
pico32.menu.UploadSpeed.115200.upload.speed=115200
|
|
pico32.menu.UploadSpeed.256000.windows=256000
|
|
pico32.menu.UploadSpeed.256000.upload.speed=256000
|
|
pico32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
pico32.menu.UploadSpeed.230400=230400
|
|
pico32.menu.UploadSpeed.230400.upload.speed=230400
|
|
pico32.menu.UploadSpeed.460800.linux=460800
|
|
pico32.menu.UploadSpeed.460800.macosx=460800
|
|
pico32.menu.UploadSpeed.460800.upload.speed=460800
|
|
pico32.menu.UploadSpeed.512000.windows=512000
|
|
pico32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
pico32.menu.DebugLevel.none=None
|
|
pico32.menu.DebugLevel.none.build.code_debug=0
|
|
pico32.menu.DebugLevel.error=Error
|
|
pico32.menu.DebugLevel.error.build.code_debug=1
|
|
pico32.menu.DebugLevel.warn=Warn
|
|
pico32.menu.DebugLevel.warn.build.code_debug=2
|
|
pico32.menu.DebugLevel.info=Info
|
|
pico32.menu.DebugLevel.info.build.code_debug=3
|
|
pico32.menu.DebugLevel.debug=Debug
|
|
pico32.menu.DebugLevel.debug.build.code_debug=4
|
|
pico32.menu.DebugLevel.verbose=Verbose
|
|
pico32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
pico32.menu.EraseFlash.none=Disabled
|
|
pico32.menu.EraseFlash.none.upload.erase_cmd=
|
|
pico32.menu.EraseFlash.all=Enabled
|
|
pico32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32s3-octal.name=ESP32S3 Dev Module Octal (WROOM2)
|
|
|
|
esp32s3-octal.bootloader.tool=esptool_py
|
|
esp32s3-octal.bootloader.tool.default=esptool_py
|
|
|
|
esp32s3-octal.upload.tool=esptool_py
|
|
esp32s3-octal.upload.tool.default=esptool_py
|
|
esp32s3-octal.upload.tool.network=esp_ota
|
|
esp32s3-octal.upload.maximum_size=1310720
|
|
esp32s3-octal.upload.maximum_data_size=327680
|
|
esp32s3-octal.upload.flags=
|
|
esp32s3-octal.upload.extra_flags=
|
|
esp32s3-octal.upload.use_1200bps_touch=false
|
|
esp32s3-octal.upload.wait_for_upload_port=false
|
|
|
|
esp32s3-octal.serial.disableDTR=false
|
|
esp32s3-octal.serial.disableRTS=false
|
|
|
|
esp32s3-octal.build.tarch=xtensa
|
|
esp32s3-octal.build.bootloader_addr=0x0
|
|
esp32s3-octal.build.target=esp32s3
|
|
esp32s3-octal.build.mcu=esp32s3
|
|
esp32s3-octal.build.core=esp32
|
|
esp32s3-octal.build.variant=esp32s3
|
|
esp32s3-octal.build.board=ESP32S3_DEV
|
|
|
|
esp32s3-octal.build.usb_mode=1
|
|
esp32s3-octal.build.cdc_on_boot=0
|
|
esp32s3-octal.build.msc_on_boot=0
|
|
esp32s3-octal.build.dfu_on_boot=0
|
|
esp32s3-octal.build.f_cpu=240000000L
|
|
esp32s3-octal.build.flash_size=4MB
|
|
esp32s3-octal.build.flash_freq=80m
|
|
esp32s3-octal.build.flash_mode=dio
|
|
|
|
esp32s3-octal.build.boot=opi
|
|
esp32s3-octal.build.boot_freq=80m
|
|
esp32s3-octal.build.partitions=default
|
|
esp32s3-octal.build.defines=
|
|
esp32s3-octal.build.loop_core=
|
|
esp32s3-octal.build.event_core=
|
|
esp32s3-octal.build.psram_type=opi
|
|
esp32s3-octal.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
esp32s3-octal.menu.JTAGAdapter.default=Disabled
|
|
esp32s3-octal.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
esp32s3-octal.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
esp32s3-octal.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
esp32s3-octal.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
esp32s3-octal.menu.JTAGAdapter.external=FTDI Adapter
|
|
esp32s3-octal.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
esp32s3-octal.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
esp32s3-octal.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
esp32s3-octal.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
esp32s3-octal.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
esp32s3-octal.menu.PSRAM.opi=OPI PSRAM
|
|
esp32s3-octal.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
esp32s3-octal.menu.PSRAM.opi.build.psram_type=opi
|
|
esp32s3-octal.menu.PSRAM.enabled=QSPI PSRAM
|
|
esp32s3-octal.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
esp32s3-octal.menu.PSRAM.enabled.build.psram_type=qspi
|
|
esp32s3-octal.menu.PSRAM.disabled=Disabled
|
|
esp32s3-octal.menu.PSRAM.disabled.build.defines=
|
|
esp32s3-octal.menu.PSRAM.disabled.build.psram_type=qspi
|
|
|
|
esp32s3-octal.menu.FlashMode.opi=OPI 80MHz
|
|
esp32s3-octal.menu.FlashMode.opi.build.flash_mode=dout
|
|
esp32s3-octal.menu.FlashMode.opi.build.boot=opi
|
|
esp32s3-octal.menu.FlashMode.opi.build.boot_freq=80m
|
|
esp32s3-octal.menu.FlashMode.opi.build.flash_freq=80m
|
|
esp32s3-octal.menu.FlashMode.qio=QIO 80MHz
|
|
esp32s3-octal.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32s3-octal.menu.FlashMode.qio.build.boot=qio
|
|
esp32s3-octal.menu.FlashMode.qio.build.boot_freq=80m
|
|
esp32s3-octal.menu.FlashMode.qio.build.flash_freq=80m
|
|
esp32s3-octal.menu.FlashMode.qio120=QIO 120MHz
|
|
esp32s3-octal.menu.FlashMode.qio120.build.flash_mode=dio
|
|
esp32s3-octal.menu.FlashMode.qio120.build.boot=qio
|
|
esp32s3-octal.menu.FlashMode.qio120.build.boot_freq=120m
|
|
esp32s3-octal.menu.FlashMode.qio120.build.flash_freq=80m
|
|
esp32s3-octal.menu.FlashMode.dio=DIO 80MHz
|
|
esp32s3-octal.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32s3-octal.menu.FlashMode.dio.build.boot=dio
|
|
esp32s3-octal.menu.FlashMode.dio.build.boot_freq=80m
|
|
esp32s3-octal.menu.FlashMode.dio.build.flash_freq=80m
|
|
|
|
esp32s3-octal.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32s3-octal.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32s3-octal.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32s3-octal.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32s3-octal.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32s3-octal.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32s3-octal.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32s3-octal.menu.FlashSize.16M.build.flash_size=16MB
|
|
esp32s3-octal.menu.FlashSize.32M=32MB (256Mb)
|
|
esp32s3-octal.menu.FlashSize.32M.build.flash_size=32MB
|
|
esp32s3-octal.menu.FlashSize.32M.build.partitions=app5M_fat24M_32MB
|
|
|
|
esp32s3-octal.menu.LoopCore.1=Core 1
|
|
esp32s3-octal.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
esp32s3-octal.menu.LoopCore.0=Core 0
|
|
esp32s3-octal.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
esp32s3-octal.menu.EventsCore.1=Core 1
|
|
esp32s3-octal.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
esp32s3-octal.menu.EventsCore.0=Core 0
|
|
esp32s3-octal.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
esp32s3-octal.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
esp32s3-octal.menu.USBMode.hwcdc.build.usb_mode=1
|
|
esp32s3-octal.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
esp32s3-octal.menu.USBMode.default.build.usb_mode=0
|
|
|
|
esp32s3-octal.menu.CDCOnBoot.default=Disabled
|
|
esp32s3-octal.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
esp32s3-octal.menu.CDCOnBoot.cdc=Enabled
|
|
esp32s3-octal.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
esp32s3-octal.menu.MSCOnBoot.default=Disabled
|
|
esp32s3-octal.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
esp32s3-octal.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
esp32s3-octal.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
esp32s3-octal.menu.DFUOnBoot.default=Disabled
|
|
esp32s3-octal.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
esp32s3-octal.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
esp32s3-octal.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
esp32s3-octal.menu.UploadMode.default=UART0 / Hardware CDC
|
|
esp32s3-octal.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
esp32s3-octal.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
esp32s3-octal.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
esp32s3-octal.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
esp32s3-octal.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
esp32s3-octal.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32s3-octal.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32s3-octal.menu.PartitionScheme.default.build.partitions=default
|
|
esp32s3-octal.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32s3-octal.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32s3-octal.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32s3-octal.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32s3-octal.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32s3-octal.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32s3-octal.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32s3-octal.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32s3-octal.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32s3-octal.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32s3-octal.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32s3-octal.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32s3-octal.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32s3-octal.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32s3-octal.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32s3-octal.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32s3-octal.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32s3-octal.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32s3-octal.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32s3-octal.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32s3-octal.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32s3-octal.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32s3-octal.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32s3-octal.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32s3-octal.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32s3-octal.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32s3-octal.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32s3-octal.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32s3-octal.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32s3-octal.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32s3-octal.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
esp32s3-octal.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32s3-octal.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32s3-octal.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32s3-octal.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32s3-octal.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32s3-octal.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32s3-octal.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
esp32s3-octal.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
esp32s3-octal.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
esp32s3-octal.menu.PartitionScheme.app5M_fat24M_32MB=32M Flash (4.8MB APP/22MB FATFS)
|
|
esp32s3-octal.menu.PartitionScheme.app5M_fat24M_32MB.build.partitions=large_fat_32MB
|
|
esp32s3-octal.menu.PartitionScheme.app5M_fat24M_32MB.upload.maximum_size=4718592
|
|
esp32s3-octal.menu.PartitionScheme.app5M_little24M_32MB=32M Flash (4.8MB APP/22MB LittleFS)
|
|
esp32s3-octal.menu.PartitionScheme.app5M_little24M_32MB.build.partitions=large_littlefs_32MB
|
|
esp32s3-octal.menu.PartitionScheme.app5M_little24M_32MB.upload.maximum_size=4718592
|
|
|
|
esp32s3-octal.menu.CPUFreq.240=240MHz (WiFi)
|
|
esp32s3-octal.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
esp32s3-octal.menu.CPUFreq.160=160MHz (WiFi)
|
|
esp32s3-octal.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32s3-octal.menu.CPUFreq.80=80MHz (WiFi)
|
|
esp32s3-octal.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32s3-octal.menu.CPUFreq.40=40MHz
|
|
esp32s3-octal.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32s3-octal.menu.CPUFreq.20=20MHz
|
|
esp32s3-octal.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32s3-octal.menu.CPUFreq.10=10MHz
|
|
esp32s3-octal.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32s3-octal.menu.UploadSpeed.921600=921600
|
|
esp32s3-octal.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32s3-octal.menu.UploadSpeed.115200=115200
|
|
esp32s3-octal.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32s3-octal.menu.UploadSpeed.256000.windows=256000
|
|
esp32s3-octal.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32s3-octal.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32s3-octal.menu.UploadSpeed.230400=230400
|
|
esp32s3-octal.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32s3-octal.menu.UploadSpeed.460800.linux=460800
|
|
esp32s3-octal.menu.UploadSpeed.460800.macosx=460800
|
|
esp32s3-octal.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32s3-octal.menu.UploadSpeed.512000.windows=512000
|
|
esp32s3-octal.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32s3-octal.menu.DebugLevel.none=None
|
|
esp32s3-octal.menu.DebugLevel.none.build.code_debug=0
|
|
esp32s3-octal.menu.DebugLevel.error=Error
|
|
esp32s3-octal.menu.DebugLevel.error.build.code_debug=1
|
|
esp32s3-octal.menu.DebugLevel.warn=Warn
|
|
esp32s3-octal.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32s3-octal.menu.DebugLevel.info=Info
|
|
esp32s3-octal.menu.DebugLevel.info.build.code_debug=3
|
|
esp32s3-octal.menu.DebugLevel.debug=Debug
|
|
esp32s3-octal.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32s3-octal.menu.DebugLevel.verbose=Verbose
|
|
esp32s3-octal.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32s3-octal.menu.EraseFlash.none=Disabled
|
|
esp32s3-octal.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32s3-octal.menu.EraseFlash.all=Enabled
|
|
esp32s3-octal.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32s3box.name=ESP32-S3-Box
|
|
|
|
esp32s3box.bootloader.tool=esptool_py
|
|
esp32s3box.bootloader.tool.default=esptool_py
|
|
|
|
esp32s3box.upload.tool=esptool_py
|
|
esp32s3box.upload.tool.default=esptool_py
|
|
esp32s3box.upload.tool.network=esp_ota
|
|
|
|
esp32s3box.upload.maximum_size=3145728
|
|
esp32s3box.upload.maximum_data_size=327680
|
|
esp32s3box.upload.speed=921600
|
|
esp32s3box.upload.flags=
|
|
esp32s3box.upload.extra_flags=
|
|
esp32s3box.upload.use_1200bps_touch=false
|
|
esp32s3box.upload.wait_for_upload_port=false
|
|
|
|
esp32s3box.serial.disableDTR=false
|
|
esp32s3box.serial.disableRTS=false
|
|
|
|
esp32s3box.build.tarch=xtensa
|
|
esp32s3box.build.bootloader_addr=0x0
|
|
esp32s3box.build.target=esp32s3
|
|
esp32s3box.build.mcu=esp32s3
|
|
esp32s3box.build.core=esp32
|
|
esp32s3box.build.variant=esp32s3box
|
|
esp32s3box.build.board=ESP32_S3_BOX
|
|
|
|
esp32s3box.build.usb_mode=1
|
|
esp32s3box.build.cdc_on_boot=1
|
|
esp32s3box.build.msc_on_boot=0
|
|
esp32s3box.build.dfu_on_boot=0
|
|
esp32s3box.build.f_cpu=240000000L
|
|
esp32s3box.build.flash_size=16MB
|
|
esp32s3box.build.flash_freq=80m
|
|
esp32s3box.build.flash_mode=dio
|
|
esp32s3box.build.boot=qio
|
|
esp32s3box.build.partitions=default
|
|
esp32s3box.build.defines=-DBOARD_HAS_PSRAM
|
|
esp32s3box.build.memory_type=qio_opi
|
|
esp32s3box.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
esp32s3box.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
|
|
esp32s3box.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
esp32s3box.menu.USBMode.hwcdc.build.usb_mode=1
|
|
esp32s3box.menu.USBMode.hwcdc.upload.use_1200bps_touch=false
|
|
esp32s3box.menu.USBMode.hwcdc.upload.wait_for_upload_port=false
|
|
esp32s3box.menu.USBMode.default=USB-OTG
|
|
esp32s3box.menu.USBMode.default.build.usb_mode=0
|
|
esp32s3box.menu.USBMode.default.upload.use_1200bps_touch=true
|
|
esp32s3box.menu.USBMode.default.upload.wait_for_upload_port=true
|
|
|
|
esp32s3box.menu.MSCOnBoot.default=Disabled
|
|
esp32s3box.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
esp32s3box.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
esp32s3box.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
esp32s3box.menu.DFUOnBoot.default=Disabled
|
|
esp32s3box.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
esp32s3box.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
esp32s3box.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
esp32s3box.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32s3box.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32s3box.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
esp32s3box.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32s3box.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32s3box.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32s3box.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32s3box.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32s3box.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32s3box.menu.PartitionScheme.esp_sr_16=ESP SR 16M (3MB APP/7MB SPIFFS/2.9MB MODEL)
|
|
esp32s3box.menu.PartitionScheme.esp_sr_16.upload.maximum_size=3145728
|
|
esp32s3box.menu.PartitionScheme.esp_sr_16.upload.extra_flags=0xD10000 {build.path}/srmodels.bin
|
|
esp32s3box.menu.PartitionScheme.esp_sr_16.build.partitions=esp_sr_16
|
|
esp32s3box.menu.PartitionScheme.custom=Custom
|
|
esp32s3box.menu.PartitionScheme.custom.build.partitions=
|
|
esp32s3box.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32s3box.menu.DebugLevel.none=None
|
|
esp32s3box.menu.DebugLevel.none.build.code_debug=0
|
|
esp32s3box.menu.DebugLevel.error=Error
|
|
esp32s3box.menu.DebugLevel.error.build.code_debug=1
|
|
esp32s3box.menu.DebugLevel.warn=Warn
|
|
esp32s3box.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32s3box.menu.DebugLevel.info=Info
|
|
esp32s3box.menu.DebugLevel.info.build.code_debug=3
|
|
esp32s3box.menu.DebugLevel.debug=Debug
|
|
esp32s3box.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32s3box.menu.DebugLevel.verbose=Verbose
|
|
esp32s3box.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32s3box.menu.EraseFlash.none=Disabled
|
|
esp32s3box.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32s3box.menu.EraseFlash.all=Enabled
|
|
esp32s3box.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32s3usbotg.name=ESP32-S3-USB-OTG
|
|
|
|
esp32s3usbotg.bootloader.tool=esptool_py
|
|
esp32s3usbotg.bootloader.tool.default=esptool_py
|
|
|
|
esp32s3usbotg.upload.tool=esptool_py
|
|
esp32s3usbotg.upload.tool.default=esptool_py
|
|
esp32s3usbotg.upload.tool.network=esp_ota
|
|
|
|
esp32s3usbotg.upload.maximum_size=1310720
|
|
esp32s3usbotg.upload.maximum_data_size=327680
|
|
esp32s3usbotg.upload.speed=921600
|
|
esp32s3usbotg.upload.flags=
|
|
esp32s3usbotg.upload.extra_flags=
|
|
esp32s3usbotg.upload.use_1200bps_touch=false
|
|
esp32s3usbotg.upload.wait_for_upload_port=false
|
|
|
|
esp32s3usbotg.serial.disableDTR=false
|
|
esp32s3usbotg.serial.disableRTS=false
|
|
|
|
esp32s3usbotg.build.tarch=xtensa
|
|
esp32s3usbotg.build.bootloader_addr=0x0
|
|
esp32s3usbotg.build.target=esp32s3
|
|
esp32s3usbotg.build.mcu=esp32s3
|
|
esp32s3usbotg.build.core=esp32
|
|
esp32s3usbotg.build.variant=esp32s3usbotg
|
|
esp32s3usbotg.build.board=ESP32_S3_USB_OTG
|
|
|
|
esp32s3usbotg.build.usb_mode=0
|
|
esp32s3usbotg.build.cdc_on_boot=0
|
|
esp32s3usbotg.build.msc_on_boot=0
|
|
esp32s3usbotg.build.dfu_on_boot=0
|
|
esp32s3usbotg.build.f_cpu=240000000L
|
|
esp32s3usbotg.build.flash_size=8MB
|
|
esp32s3usbotg.build.flash_freq=80m
|
|
esp32s3usbotg.build.flash_mode=dio
|
|
esp32s3usbotg.build.boot=qio
|
|
esp32s3usbotg.build.partitions=default
|
|
esp32s3usbotg.build.defines=
|
|
esp32s3usbotg.build.memory_type=qio_qspi
|
|
esp32s3usbotg.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
esp32s3usbotg.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
|
|
esp32s3usbotg.menu.USBMode.default=USB-OTG
|
|
esp32s3usbotg.menu.USBMode.default.build.usb_mode=0
|
|
esp32s3usbotg.menu.USBMode.default.build.cdc_on_boot=0
|
|
esp32s3usbotg.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
esp32s3usbotg.menu.USBMode.hwcdc.build.usb_mode=1
|
|
esp32s3usbotg.menu.USBMode.hwcdc.build.cdc_on_boot=1
|
|
|
|
esp32s3usbotg.menu.UploadMode.default=UART0 / Hardware CDC
|
|
esp32s3usbotg.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
esp32s3usbotg.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
esp32s3usbotg.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
esp32s3usbotg.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
esp32s3usbotg.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
esp32s3usbotg.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32s3usbotg.menu.PartitionScheme.default.build.partitions=default
|
|
esp32s3usbotg.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32s3usbotg.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32s3usbotg.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32s3usbotg.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32s3usbotg.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32s3usbotg.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32s3usbotg.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32s3usbotg.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32s3usbotg.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32s3usbotg.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32s3usbotg.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32s3usbotg.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32s3usbotg.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32s3usbotg.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32s3usbotg.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32s3usbotg.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32s3usbotg.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32s3usbotg.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32s3usbotg.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32s3usbotg.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32s3usbotg.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32s3usbotg.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32s3usbotg.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32s3usbotg.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32s3usbotg.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32s3usbotg.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32s3usbotg.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32s3usbotg.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32s3usbotg.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
esp32s3usbotg.menu.PartitionScheme.custom=Custom
|
|
esp32s3usbotg.menu.PartitionScheme.custom.build.partitions=
|
|
esp32s3usbotg.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32s3usbotg.menu.DebugLevel.none=None
|
|
esp32s3usbotg.menu.DebugLevel.none.build.code_debug=0
|
|
esp32s3usbotg.menu.DebugLevel.error=Error
|
|
esp32s3usbotg.menu.DebugLevel.error.build.code_debug=1
|
|
esp32s3usbotg.menu.DebugLevel.warn=Warn
|
|
esp32s3usbotg.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32s3usbotg.menu.DebugLevel.info=Info
|
|
esp32s3usbotg.menu.DebugLevel.info.build.code_debug=3
|
|
esp32s3usbotg.menu.DebugLevel.debug=Debug
|
|
esp32s3usbotg.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32s3usbotg.menu.DebugLevel.verbose=Verbose
|
|
esp32s3usbotg.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32s3usbotg.menu.EraseFlash.none=Disabled
|
|
esp32s3usbotg.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32s3usbotg.menu.EraseFlash.all=Enabled
|
|
esp32s3usbotg.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32s3camlcd.name=ESP32S3 CAM LCD
|
|
|
|
esp32s3camlcd.bootloader.tool=esptool_py
|
|
esp32s3camlcd.bootloader.tool.default=esptool_py
|
|
|
|
esp32s3camlcd.upload.tool=esptool_py
|
|
esp32s3camlcd.upload.tool.default=esptool_py
|
|
esp32s3camlcd.upload.tool.network=esp_ota
|
|
|
|
esp32s3camlcd.upload.maximum_size=1310720
|
|
esp32s3camlcd.upload.maximum_data_size=327680
|
|
esp32s3camlcd.upload.flags=
|
|
esp32s3camlcd.upload.extra_flags=
|
|
esp32s3camlcd.upload.use_1200bps_touch=false
|
|
esp32s3camlcd.upload.wait_for_upload_port=false
|
|
|
|
esp32s3camlcd.serial.disableDTR=false
|
|
esp32s3camlcd.serial.disableRTS=false
|
|
|
|
esp32s3camlcd.build.tarch=xtensa
|
|
esp32s3camlcd.build.bootloader_addr=0x0
|
|
esp32s3camlcd.build.target=esp32s3
|
|
esp32s3camlcd.build.mcu=esp32s3
|
|
esp32s3camlcd.build.core=esp32
|
|
esp32s3camlcd.build.variant=esp32s3camlcd
|
|
esp32s3camlcd.build.board=ESP32S3_CAM_LCD
|
|
|
|
esp32s3camlcd.build.usb_mode=1
|
|
esp32s3camlcd.build.cdc_on_boot=0
|
|
esp32s3camlcd.build.msc_on_boot=0
|
|
esp32s3camlcd.build.dfu_on_boot=0
|
|
esp32s3camlcd.build.f_cpu=240000000L
|
|
esp32s3camlcd.build.flash_size=4MB
|
|
esp32s3camlcd.build.flash_freq=80m
|
|
esp32s3camlcd.build.flash_mode=dout
|
|
esp32s3camlcd.build.boot=opi
|
|
esp32s3camlcd.build.partitions=default
|
|
esp32s3camlcd.build.defines=-DBOARD_HAS_PSRAM
|
|
esp32s3camlcd.build.memory_type=opi_opi
|
|
esp32s3camlcd.build.loop_core=
|
|
esp32s3camlcd.build.event_core=
|
|
|
|
esp32s3camlcd.menu.LoopCore.1=Core 1
|
|
esp32s3camlcd.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
esp32s3camlcd.menu.LoopCore.0=Core 0
|
|
esp32s3camlcd.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
esp32s3camlcd.menu.EventsCore.1=Core 1
|
|
esp32s3camlcd.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
esp32s3camlcd.menu.EventsCore.0=Core 0
|
|
esp32s3camlcd.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
esp32s3camlcd.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32s3camlcd.menu.PartitionScheme.default.build.partitions=default
|
|
esp32s3camlcd.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32s3camlcd.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32s3camlcd.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32s3camlcd.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32s3camlcd.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32s3camlcd.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32s3camlcd.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32s3camlcd.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32s3camlcd.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32s3camlcd.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32s3camlcd.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32s3camlcd.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32s3camlcd.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32s3camlcd.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32s3camlcd.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32s3camlcd.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32s3camlcd.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32s3camlcd.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32s3camlcd.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32s3camlcd.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32s3camlcd.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32s3camlcd.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32s3camlcd.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32s3camlcd.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32s3camlcd.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32s3camlcd.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32s3camlcd.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32s3camlcd.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32s3camlcd.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32s3camlcd.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32s3camlcd.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
|
|
esp32s3camlcd.menu.UploadSpeed.921600=921600
|
|
esp32s3camlcd.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32s3camlcd.menu.UploadSpeed.115200=115200
|
|
esp32s3camlcd.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32s3camlcd.menu.UploadSpeed.256000.windows=256000
|
|
esp32s3camlcd.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32s3camlcd.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32s3camlcd.menu.UploadSpeed.230400=230400
|
|
esp32s3camlcd.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32s3camlcd.menu.UploadSpeed.460800.linux=460800
|
|
esp32s3camlcd.menu.UploadSpeed.460800.macosx=460800
|
|
esp32s3camlcd.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32s3camlcd.menu.UploadSpeed.512000.windows=512000
|
|
esp32s3camlcd.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32s3camlcd.menu.DebugLevel.none=None
|
|
esp32s3camlcd.menu.DebugLevel.none.build.code_debug=0
|
|
esp32s3camlcd.menu.DebugLevel.error=Error
|
|
esp32s3camlcd.menu.DebugLevel.error.build.code_debug=1
|
|
esp32s3camlcd.menu.DebugLevel.warn=Warn
|
|
esp32s3camlcd.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32s3camlcd.menu.DebugLevel.info=Info
|
|
esp32s3camlcd.menu.DebugLevel.info.build.code_debug=3
|
|
esp32s3camlcd.menu.DebugLevel.debug=Debug
|
|
esp32s3camlcd.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32s3camlcd.menu.DebugLevel.verbose=Verbose
|
|
esp32s3camlcd.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32s3camlcd.menu.EraseFlash.none=Disabled
|
|
esp32s3camlcd.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32s3camlcd.menu.EraseFlash.all=Enabled
|
|
esp32s3camlcd.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32s2usb.name=ESP32S2 Native USB
|
|
esp32s2usb.vid.0=0x303a
|
|
esp32s2usb.pid.0=0x0003
|
|
esp32s2usb.upload_port.vid.0=0x303a
|
|
esp32s2usb.upload_port.pid.0=0x0003
|
|
|
|
esp32s2usb.bootloader.tool=esptool_py
|
|
esp32s2usb.bootloader.tool.default=esptool_py
|
|
|
|
esp32s2usb.upload.tool=esptool_py
|
|
esp32s2usb.upload.tool.default=esptool_py
|
|
esp32s2usb.upload.tool.network=esp_ota
|
|
|
|
esp32s2usb.upload.maximum_size=1310720
|
|
esp32s2usb.upload.maximum_data_size=327680
|
|
esp32s2usb.upload.flags=
|
|
esp32s2usb.upload.extra_flags=
|
|
esp32s2usb.upload.use_1200bps_touch=true
|
|
esp32s2usb.upload.wait_for_upload_port=true
|
|
esp32s2usb.upload.speed=921600
|
|
|
|
esp32s2usb.serial.disableDTR=false
|
|
esp32s2usb.serial.disableRTS=false
|
|
|
|
esp32s2usb.build.tarch=xtensa
|
|
esp32s2usb.build.bootloader_addr=0x1000
|
|
esp32s2usb.build.target=esp32s2
|
|
esp32s2usb.build.mcu=esp32s2
|
|
esp32s2usb.build.core=esp32
|
|
esp32s2usb.build.variant=esp32s2usb
|
|
esp32s2usb.build.board=ESP32S2_USB
|
|
|
|
esp32s2usb.build.cdc_on_boot=1
|
|
esp32s2usb.build.msc_on_boot=1
|
|
esp32s2usb.build.dfu_on_boot=1
|
|
esp32s2usb.build.f_cpu=240000000L
|
|
esp32s2usb.build.flash_size=4MB
|
|
esp32s2usb.build.flash_freq=80m
|
|
esp32s2usb.build.flash_mode=dio
|
|
esp32s2usb.build.boot=qio
|
|
esp32s2usb.build.partitions=default
|
|
esp32s2usb.build.defines=
|
|
|
|
esp32s2usb.menu.PSRAM.disabled=Disabled
|
|
esp32s2usb.menu.PSRAM.disabled.build.defines=
|
|
esp32s2usb.menu.PSRAM.enabled=Enabled
|
|
esp32s2usb.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
|
|
esp32s2usb.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32s2usb.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32s2usb.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32s2usb.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32s2usb.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32s2usb.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32s2usb.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
esp32s2usb.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32s2usb.menu.PartitionScheme.default.build.partitions=default
|
|
esp32s2usb.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32s2usb.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32s2usb.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32s2usb.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32s2usb.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32s2usb.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32s2usb.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32s2usb.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32s2usb.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32s2usb.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32s2usb.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32s2usb.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32s2usb.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32s2usb.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32s2usb.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32s2usb.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32s2usb.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32s2usb.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32s2usb.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32s2usb.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32s2usb.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32s2usb.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32s2usb.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32s2usb.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32s2usb.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32s2usb.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32s2usb.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32s2usb.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32s2usb.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32s2usb.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32s2usb.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
|
|
esp32s2usb.menu.DebugLevel.none=None
|
|
esp32s2usb.menu.DebugLevel.none.build.code_debug=0
|
|
esp32s2usb.menu.DebugLevel.error=Error
|
|
esp32s2usb.menu.DebugLevel.error.build.code_debug=1
|
|
esp32s2usb.menu.DebugLevel.warn=Warn
|
|
esp32s2usb.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32s2usb.menu.DebugLevel.info=Info
|
|
esp32s2usb.menu.DebugLevel.info.build.code_debug=3
|
|
esp32s2usb.menu.DebugLevel.debug=Debug
|
|
esp32s2usb.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32s2usb.menu.DebugLevel.verbose=Verbose
|
|
esp32s2usb.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32s2usb.menu.EraseFlash.none=Disabled
|
|
esp32s2usb.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32s2usb.menu.EraseFlash.all=Enabled
|
|
esp32s2usb.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32wroverkit.name=ESP32 Wrover Kit (all versions)
|
|
|
|
esp32wroverkit.bootloader.tool=esptool_py
|
|
esp32wroverkit.bootloader.tool.default=esptool_py
|
|
|
|
esp32wroverkit.upload.tool=esptool_py
|
|
esp32wroverkit.upload.tool.default=esptool_py
|
|
esp32wroverkit.upload.tool.network=esp_ota
|
|
|
|
esp32wroverkit.upload.maximum_size=1310720
|
|
esp32wroverkit.upload.maximum_data_size=327680
|
|
esp32wroverkit.upload.flags=
|
|
esp32wroverkit.upload.extra_flags=
|
|
|
|
esp32wroverkit.serial.disableDTR=true
|
|
esp32wroverkit.serial.disableRTS=true
|
|
|
|
esp32wroverkit.build.tarch=xtensa
|
|
esp32wroverkit.build.bootloader_addr=0x1000
|
|
esp32wroverkit.build.target=esp32
|
|
esp32wroverkit.build.mcu=esp32
|
|
esp32wroverkit.build.core=esp32
|
|
esp32wroverkit.build.variant=esp32
|
|
esp32wroverkit.build.board=ESP32_WROVER_KIT
|
|
|
|
esp32wroverkit.build.f_cpu=240000000L
|
|
esp32wroverkit.build.flash_size=4MB
|
|
esp32wroverkit.build.flash_freq=40m
|
|
esp32wroverkit.build.flash_mode=dio
|
|
esp32wroverkit.build.boot=dio
|
|
esp32wroverkit.build.partitions=default
|
|
|
|
esp32wroverkit.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32wroverkit.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32wroverkit.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32wroverkit.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32wroverkit.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32wroverkit.menu.FlashSize.2M=2MB (16Mb)
|
|
esp32wroverkit.menu.FlashSize.2M.build.flash_size=2MB
|
|
esp32wroverkit.menu.FlashSize.2M.build.partitions=minimal
|
|
esp32wroverkit.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32wroverkit.menu.FlashSize.16M.build.flash_size=16MB
|
|
esp32wroverkit.menu.FlashSize.16M.build.partitions=default_16MB
|
|
|
|
esp32wroverkit.menu.PSRAM.enabled=Enabled
|
|
esp32wroverkit.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
esp32wroverkit.menu.PSRAM.disabled=Disabled
|
|
esp32wroverkit.menu.PSRAM.disabled.build.defines=
|
|
|
|
esp32wroverkit.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32wroverkit.menu.PartitionScheme.default.build.partitions=default
|
|
esp32wroverkit.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32wroverkit.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32wroverkit.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32wroverkit.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32wroverkit.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32wroverkit.menu.PartitionScheme.default_16MB=16M with spiffs (6.25MB APP/3.43MB SPIFFS)
|
|
esp32wroverkit.menu.PartitionScheme.default_16MB.build.partitions=default_16MB
|
|
esp32wroverkit.menu.PartitionScheme.default_16MB.upload.maximum_size=6553600
|
|
esp32wroverkit.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32wroverkit.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32wroverkit.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32wroverkit.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32wroverkit.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32wroverkit.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32wroverkit.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32wroverkit.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32wroverkit.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32wroverkit.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32wroverkit.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32wroverkit.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32wroverkit.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32wroverkit.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32wroverkit.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32wroverkit.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32wroverkit.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32wroverkit.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32wroverkit.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32wroverkit.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32wroverkit.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32wroverkit.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32wroverkit.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32wroverkit.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32wroverkit.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32wroverkit.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32wroverkit.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32wroverkit.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32wroverkit.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32wroverkit.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
esp32wroverkit.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
esp32wroverkit.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
esp32wroverkit.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
esp32wroverkit.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
esp32wroverkit.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
esp32wroverkit.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32wroverkit.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
esp32wroverkit.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32wroverkit.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
esp32wroverkit.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32wroverkit.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
esp32wroverkit.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
esp32wroverkit.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
esp32wroverkit.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32wroverkit.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
esp32wroverkit.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
esp32wroverkit.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
esp32wroverkit.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32wroverkit.menu.FlashMode.qio=QIO
|
|
esp32wroverkit.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32wroverkit.menu.FlashMode.qio.build.boot=qio
|
|
esp32wroverkit.menu.FlashMode.dio=DIO
|
|
esp32wroverkit.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32wroverkit.menu.FlashMode.dio.build.boot=dio
|
|
esp32wroverkit.menu.FlashFreq.80=80MHz
|
|
esp32wroverkit.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32wroverkit.menu.FlashFreq.40=40MHz
|
|
esp32wroverkit.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32wroverkit.menu.UploadSpeed.921600=921600
|
|
esp32wroverkit.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32wroverkit.menu.UploadSpeed.115200=115200
|
|
esp32wroverkit.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32wroverkit.menu.UploadSpeed.256000.windows=256000
|
|
esp32wroverkit.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32wroverkit.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32wroverkit.menu.UploadSpeed.230400=230400
|
|
esp32wroverkit.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32wroverkit.menu.UploadSpeed.460800.linux=460800
|
|
esp32wroverkit.menu.UploadSpeed.460800.macosx=460800
|
|
esp32wroverkit.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32wroverkit.menu.UploadSpeed.512000.windows=512000
|
|
esp32wroverkit.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32wroverkit.menu.DebugLevel.none=None
|
|
esp32wroverkit.menu.DebugLevel.none.build.code_debug=0
|
|
esp32wroverkit.menu.DebugLevel.error=Error
|
|
esp32wroverkit.menu.DebugLevel.error.build.code_debug=1
|
|
esp32wroverkit.menu.DebugLevel.warn=Warn
|
|
esp32wroverkit.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32wroverkit.menu.DebugLevel.info=Info
|
|
esp32wroverkit.menu.DebugLevel.info.build.code_debug=3
|
|
esp32wroverkit.menu.DebugLevel.debug=Debug
|
|
esp32wroverkit.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32wroverkit.menu.DebugLevel.verbose=Verbose
|
|
esp32wroverkit.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32wroverkit.menu.EraseFlash.none=Disabled
|
|
esp32wroverkit.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32wroverkit.menu.EraseFlash.all=Enabled
|
|
esp32wroverkit.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
aventen_s3_sync.name=Aventen S3 Sync
|
|
## Based upon ESP32-S3 Dev Board
|
|
|
|
aventen_s3_sync.bootloader.tool=esptool_py
|
|
aventen_s3_sync.bootloader.tool.default=esptool_py
|
|
|
|
aventen_s3_sync.upload.tool=esptool_py
|
|
aventen_s3_sync.upload.tool.default=esptool_py
|
|
aventen_s3_sync.upload.tool.network=esp_ota
|
|
|
|
aventen_s3_sync.upload.maximum_size=1310720
|
|
aventen_s3_sync.upload.maximum_data_size=327680
|
|
aventen_s3_sync.upload.flags=
|
|
aventen_s3_sync.upload.extra_flags=
|
|
aventen_s3_sync.upload.use_1200bps_touch=false
|
|
aventen_s3_sync.upload.wait_for_upload_port=false
|
|
|
|
aventen_s3_sync.serial.disableDTR=false
|
|
aventen_s3_sync.serial.disableRTS=false
|
|
|
|
aventen_s3_sync.build.tarch=xtensa
|
|
aventen_s3_sync.build.bootloader_addr=0x0
|
|
aventen_s3_sync.build.target=esp32s3
|
|
aventen_s3_sync.build.mcu=esp32s3
|
|
aventen_s3_sync.build.core=esp32
|
|
aventen_s3_sync.build.variant=Aventen_S3_Sync
|
|
aventen_s3_sync.build.board=AVENTEN_S3_SYNC
|
|
|
|
aventen_s3_sync.build.usb_mode=1
|
|
aventen_s3_sync.build.cdc_on_boot=0
|
|
aventen_s3_sync.build.msc_on_boot=0
|
|
aventen_s3_sync.build.dfu_on_boot=0
|
|
aventen_s3_sync.build.f_cpu=240000000L
|
|
aventen_s3_sync.build.flash_size=16MB
|
|
aventen_s3_sync.build.flash_freq=80m
|
|
aventen_s3_sync.build.flash_mode=dio
|
|
aventen_s3_sync.build.boot=qio
|
|
aventen_s3_sync.build.boot_freq=80m
|
|
aventen_s3_sync.build.partitions=default
|
|
aventen_s3_sync.build.defines=
|
|
aventen_s3_sync.build.loop_core=
|
|
aventen_s3_sync.build.event_core=
|
|
aventen_s3_sync.build.psram_type=qspi
|
|
aventen_s3_sync.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0
|
|
aventen_s3_sync.menu.JTAGAdapter.default=Disabled
|
|
aventen_s3_sync.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
aventen_s3_sync.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
aventen_s3_sync.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
aventen_s3_sync.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
aventen_s3_sync.menu.JTAGAdapter.external=FTDI Adapter
|
|
aventen_s3_sync.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
aventen_s3_sync.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
aventen_s3_sync.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
aventen_s3_sync.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
aventen_s3_sync.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
aventen_s3_sync.menu.PSRAM.disabled=Disabled
|
|
aventen_s3_sync.menu.PSRAM.disabled.build.defines=
|
|
aventen_s3_sync.menu.PSRAM.disabled.build.psram_type=qspi
|
|
aventen_s3_sync.menu.PSRAM.enabled=QSPI PSRAM
|
|
aventen_s3_sync.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
aventen_s3_sync.menu.PSRAM.enabled.build.psram_type=qspi
|
|
aventen_s3_sync.menu.PSRAM.opi=OPI PSRAM
|
|
aventen_s3_sync.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
aventen_s3_sync.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
aventen_s3_sync.menu.FlashMode.qio=QIO 80MHz
|
|
aventen_s3_sync.menu.FlashMode.qio.build.flash_mode=dio
|
|
aventen_s3_sync.menu.FlashMode.qio.build.boot=qio
|
|
aventen_s3_sync.menu.FlashMode.qio.build.boot_freq=80m
|
|
aventen_s3_sync.menu.FlashMode.qio.build.flash_freq=80m
|
|
aventen_s3_sync.menu.FlashMode.qio120=QIO 120MHz
|
|
aventen_s3_sync.menu.FlashMode.qio120.build.flash_mode=dio
|
|
aventen_s3_sync.menu.FlashMode.qio120.build.boot=qio
|
|
aventen_s3_sync.menu.FlashMode.qio120.build.boot_freq=120m
|
|
aventen_s3_sync.menu.FlashMode.qio120.build.flash_freq=80m
|
|
aventen_s3_sync.menu.FlashMode.dio=DIO 80MHz
|
|
aventen_s3_sync.menu.FlashMode.dio.build.flash_mode=dio
|
|
aventen_s3_sync.menu.FlashMode.dio.build.boot=dio
|
|
aventen_s3_sync.menu.FlashMode.dio.build.boot_freq=80m
|
|
aventen_s3_sync.menu.FlashMode.dio.build.flash_freq=80m
|
|
aventen_s3_sync.menu.FlashMode.opi=OPI 80MHz
|
|
aventen_s3_sync.menu.FlashMode.opi.build.flash_mode=dout
|
|
aventen_s3_sync.menu.FlashMode.opi.build.boot=opi
|
|
aventen_s3_sync.menu.FlashMode.opi.build.boot_freq=80m
|
|
aventen_s3_sync.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
aventen_s3_sync.menu.FlashSize.16M=16MB (128Mb)
|
|
aventen_s3_sync.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
aventen_s3_sync.menu.LoopCore.1=Core 1
|
|
aventen_s3_sync.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
aventen_s3_sync.menu.LoopCore.0=Core 0
|
|
aventen_s3_sync.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
aventen_s3_sync.menu.EventsCore.1=Core 1
|
|
aventen_s3_sync.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
aventen_s3_sync.menu.EventsCore.0=Core 0
|
|
aventen_s3_sync.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
aventen_s3_sync.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
aventen_s3_sync.menu.USBMode.hwcdc.build.usb_mode=1
|
|
aventen_s3_sync.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
aventen_s3_sync.menu.USBMode.default.build.usb_mode=0
|
|
|
|
aventen_s3_sync.menu.CDCOnBoot.default=Disabled
|
|
aventen_s3_sync.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
aventen_s3_sync.menu.CDCOnBoot.cdc=Enabled
|
|
aventen_s3_sync.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
aventen_s3_sync.menu.MSCOnBoot.default=Disabled
|
|
aventen_s3_sync.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
aventen_s3_sync.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
aventen_s3_sync.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
aventen_s3_sync.menu.DFUOnBoot.default=Disabled
|
|
aventen_s3_sync.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
aventen_s3_sync.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
aventen_s3_sync.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
aventen_s3_sync.menu.UploadMode.default=UART0 / Hardware CDC
|
|
aventen_s3_sync.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
aventen_s3_sync.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
aventen_s3_sync.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
aventen_s3_sync.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
aventen_s3_sync.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
aventen_s3_sync.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
aventen_s3_sync.menu.PartitionScheme.default.build.partitions=default
|
|
aventen_s3_sync.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
aventen_s3_sync.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
aventen_s3_sync.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
aventen_s3_sync.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
aventen_s3_sync.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
aventen_s3_sync.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
aventen_s3_sync.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
aventen_s3_sync.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
aventen_s3_sync.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
aventen_s3_sync.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
aventen_s3_sync.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
aventen_s3_sync.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
aventen_s3_sync.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
aventen_s3_sync.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
aventen_s3_sync.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
aventen_s3_sync.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
aventen_s3_sync.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
aventen_s3_sync.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
aventen_s3_sync.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
aventen_s3_sync.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
aventen_s3_sync.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
aventen_s3_sync.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
aventen_s3_sync.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
aventen_s3_sync.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
aventen_s3_sync.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
aventen_s3_sync.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
aventen_s3_sync.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
aventen_s3_sync.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
aventen_s3_sync.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
aventen_s3_sync.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
aventen_s3_sync.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
aventen_s3_sync.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
aventen_s3_sync.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
aventen_s3_sync.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
aventen_s3_sync.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
aventen_s3_sync.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
aventen_s3_sync.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
aventen_s3_sync.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
aventen_s3_sync.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
aventen_s3_sync.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
aventen_s3_sync.menu.CPUFreq.240=240MHz (WiFi)
|
|
aventen_s3_sync.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
aventen_s3_sync.menu.CPUFreq.160=160MHz (WiFi)
|
|
aventen_s3_sync.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
aventen_s3_sync.menu.CPUFreq.80=80MHz (WiFi)
|
|
aventen_s3_sync.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
aventen_s3_sync.menu.CPUFreq.40=40MHz
|
|
aventen_s3_sync.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
aventen_s3_sync.menu.CPUFreq.20=20MHz
|
|
aventen_s3_sync.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
aventen_s3_sync.menu.CPUFreq.10=10MHz
|
|
aventen_s3_sync.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
aventen_s3_sync.menu.UploadSpeed.921600=921600
|
|
aventen_s3_sync.menu.UploadSpeed.921600.upload.speed=921600
|
|
aventen_s3_sync.menu.UploadSpeed.115200=115200
|
|
aventen_s3_sync.menu.UploadSpeed.115200.upload.speed=115200
|
|
aventen_s3_sync.menu.UploadSpeed.256000.windows=256000
|
|
aventen_s3_sync.menu.UploadSpeed.256000.upload.speed=256000
|
|
aventen_s3_sync.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
aventen_s3_sync.menu.UploadSpeed.230400=230400
|
|
aventen_s3_sync.menu.UploadSpeed.230400.upload.speed=230400
|
|
aventen_s3_sync.menu.UploadSpeed.460800.linux=460800
|
|
aventen_s3_sync.menu.UploadSpeed.460800.macosx=460800
|
|
aventen_s3_sync.menu.UploadSpeed.460800.upload.speed=460800
|
|
aventen_s3_sync.menu.UploadSpeed.512000.windows=512000
|
|
aventen_s3_sync.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
aventen_s3_sync.menu.DebugLevel.none=None
|
|
aventen_s3_sync.menu.DebugLevel.none.build.code_debug=0
|
|
aventen_s3_sync.menu.DebugLevel.error=Error
|
|
aventen_s3_sync.menu.DebugLevel.error.build.code_debug=1
|
|
aventen_s3_sync.menu.DebugLevel.warn=Warn
|
|
aventen_s3_sync.menu.DebugLevel.warn.build.code_debug=2
|
|
aventen_s3_sync.menu.DebugLevel.info=Info
|
|
aventen_s3_sync.menu.DebugLevel.info.build.code_debug=3
|
|
aventen_s3_sync.menu.DebugLevel.debug=Debug
|
|
aventen_s3_sync.menu.DebugLevel.debug.build.code_debug=4
|
|
aventen_s3_sync.menu.DebugLevel.verbose=Verbose
|
|
aventen_s3_sync.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
aventen_s3_sync.menu.EraseFlash.none=Disabled
|
|
aventen_s3_sync.menu.EraseFlash.none.upload.erase_cmd=
|
|
aventen_s3_sync.menu.EraseFlash.all=Enabled
|
|
aventen_s3_sync.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
um_bling.name=UM BLING
|
|
um_bling.vid.0=0x303a
|
|
um_bling.pid.0=0x817F
|
|
um_bling.upload_port.0.vid=0x303a
|
|
um_bling.upload_port.0.pid=0x817F
|
|
|
|
um_bling.bootloader.tool=esptool_py
|
|
um_bling.bootloader.tool.default=esptool_py
|
|
|
|
um_bling.upload.tool=esptool_py
|
|
um_bling.upload.tool.default=esptool_py
|
|
um_bling.upload.tool.network=esp_ota
|
|
|
|
um_bling.upload.maximum_size=1310720
|
|
um_bling.upload.maximum_data_size=327680
|
|
um_bling.upload.flags=
|
|
um_bling.upload.extra_flags=
|
|
um_bling.upload.use_1200bps_touch=false
|
|
um_bling.upload.wait_for_upload_port=false
|
|
|
|
um_bling.serial.disableDTR=false
|
|
um_bling.serial.disableRTS=false
|
|
|
|
um_bling.build.tarch=xtensa
|
|
um_bling.build.bootloader_addr=0x0
|
|
um_bling.build.target=esp32s3
|
|
um_bling.build.mcu=esp32s3
|
|
um_bling.build.core=esp32
|
|
um_bling.build.variant=um_bling
|
|
um_bling.build.board=BLING
|
|
|
|
um_bling.build.usb_mode=1
|
|
um_bling.build.cdc_on_boot=0
|
|
um_bling.build.msc_on_boot=0
|
|
um_bling.build.dfu_on_boot=0
|
|
um_bling.build.f_cpu=240000000L
|
|
um_bling.build.flash_size=8MB
|
|
um_bling.build.flash_freq=80m
|
|
um_bling.build.flash_mode=dio
|
|
um_bling.build.boot=qio
|
|
um_bling.build.partitions=default
|
|
um_bling.build.defines=
|
|
um_bling.build.loop_core=
|
|
um_bling.build.event_core=
|
|
um_bling.build.flash_type=qio
|
|
um_bling.build.psram_type=qspi
|
|
um_bling.build.memory_type=qio_qspi
|
|
|
|
um_bling.menu.LoopCore.1=Core 1
|
|
um_bling.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
um_bling.menu.LoopCore.0=Core 0
|
|
um_bling.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
um_bling.menu.EventsCore.1=Core 1
|
|
um_bling.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
um_bling.menu.EventsCore.0=Core 0
|
|
um_bling.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
um_bling.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
um_bling.menu.USBMode.hwcdc.build.usb_mode=1
|
|
um_bling.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
um_bling.menu.USBMode.default.build.usb_mode=0
|
|
|
|
um_bling.menu.CDCOnBoot.cdc=Enabled
|
|
um_bling.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
um_bling.menu.CDCOnBoot.default=Disabled
|
|
um_bling.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
um_bling.menu.MSCOnBoot.default=Disabled
|
|
um_bling.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
um_bling.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
um_bling.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
um_bling.menu.DFUOnBoot.default=Disabled
|
|
um_bling.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
um_bling.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
um_bling.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
um_bling.menu.UploadMode.default=UART0 / Hardware CDC
|
|
um_bling.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
um_bling.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
um_bling.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
um_bling.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
um_bling.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
um_bling.menu.PSRAM.enabled=Enabled
|
|
um_bling.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
um_bling.menu.PSRAM.disabled=Disabled
|
|
um_bling.menu.PSRAM.disabled.build.defines=
|
|
|
|
um_bling.menu.PartitionScheme.default_8MB=Default (3MB APP/1.5MB SPIFFS)
|
|
um_bling.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
um_bling.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
um_bling.menu.PartitionScheme.tinyuf2=TinyUF2 Compatibility (2MB APP/3.7MB FFAT)
|
|
um_bling.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader_tinyuf2
|
|
um_bling.menu.PartitionScheme.tinyuf2.build.custom_partitions=partitions_tinyuf2
|
|
um_bling.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
um_bling.menu.PartitionScheme.tinyuf2.upload.maximum_size=2097152
|
|
|
|
um_bling.menu.CPUFreq.240=240MHz (WiFi)
|
|
um_bling.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
um_bling.menu.CPUFreq.160=160MHz (WiFi)
|
|
um_bling.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
um_bling.menu.CPUFreq.80=80MHz (WiFi)
|
|
um_bling.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
um_bling.menu.CPUFreq.40=40MHz
|
|
um_bling.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
um_bling.menu.CPUFreq.20=20MHz
|
|
um_bling.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
um_bling.menu.CPUFreq.10=10MHz
|
|
um_bling.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
um_bling.menu.FlashMode.qio=QIO
|
|
um_bling.menu.FlashMode.qio.build.flash_mode=dio
|
|
um_bling.menu.FlashMode.qio.build.boot=qio
|
|
um_bling.menu.FlashMode.dio=DIO
|
|
um_bling.menu.FlashMode.dio.build.flash_mode=dio
|
|
um_bling.menu.FlashMode.dio.build.boot=dio
|
|
|
|
um_bling.menu.UploadSpeed.921600=921600
|
|
um_bling.menu.UploadSpeed.921600.upload.speed=921600
|
|
um_bling.menu.UploadSpeed.115200=115200
|
|
um_bling.menu.UploadSpeed.115200.upload.speed=115200
|
|
um_bling.menu.UploadSpeed.256000.windows=256000
|
|
um_bling.menu.UploadSpeed.256000.upload.speed=256000
|
|
um_bling.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
um_bling.menu.UploadSpeed.230400=230400
|
|
um_bling.menu.UploadSpeed.230400.upload.speed=230400
|
|
um_bling.menu.UploadSpeed.460800.linux=460800
|
|
um_bling.menu.UploadSpeed.460800.macosx=460800
|
|
um_bling.menu.UploadSpeed.460800.upload.speed=460800
|
|
um_bling.menu.UploadSpeed.512000.windows=512000
|
|
um_bling.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
um_bling.menu.DebugLevel.none=None
|
|
um_bling.menu.DebugLevel.none.build.code_debug=0
|
|
um_bling.menu.DebugLevel.error=Error
|
|
um_bling.menu.DebugLevel.error.build.code_debug=1
|
|
um_bling.menu.DebugLevel.warn=Warn
|
|
um_bling.menu.DebugLevel.warn.build.code_debug=2
|
|
um_bling.menu.DebugLevel.info=Info
|
|
um_bling.menu.DebugLevel.info.build.code_debug=3
|
|
um_bling.menu.DebugLevel.debug=Debug
|
|
um_bling.menu.DebugLevel.debug.build.code_debug=4
|
|
um_bling.menu.DebugLevel.verbose=Verbose
|
|
um_bling.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
um_bling.menu.EraseFlash.none=Disabled
|
|
um_bling.menu.EraseFlash.none.upload.erase_cmd=
|
|
um_bling.menu.EraseFlash.all=Enabled
|
|
um_bling.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
um_feathers2.name=UM FeatherS2
|
|
um_feathers2.vid.0=0x239A
|
|
um_feathers2.pid.0=0x80AB
|
|
um_feathers2.upload_port.0.vid=0x239A
|
|
um_feathers2.upload_port.0.pid=0x80AB
|
|
|
|
um_feathers2.bootloader.tool=esptool_py
|
|
um_feathers2.bootloader.tool.default=esptool_py
|
|
|
|
um_feathers2.upload.tool=esptool_py
|
|
um_feathers2.upload.tool.default=esptool_py
|
|
um_feathers2.upload.tool.network=esp_ota
|
|
|
|
um_feathers2.upload.maximum_size=1310720
|
|
um_feathers2.upload.maximum_data_size=327680
|
|
um_feathers2.upload.flags=
|
|
um_feathers2.upload.extra_flags=
|
|
um_feathers2.upload.use_1200bps_touch=true
|
|
um_feathers2.upload.wait_for_upload_port=true
|
|
|
|
um_feathers2.serial.disableDTR=false
|
|
um_feathers2.serial.disableRTS=false
|
|
|
|
um_feathers2.build.tarch=xtensa
|
|
um_feathers2.build.bootloader_addr=0x1000
|
|
um_feathers2.build.target=esp32s2
|
|
um_feathers2.build.mcu=esp32s2
|
|
um_feathers2.build.core=esp32
|
|
um_feathers2.build.variant=um_feathers2
|
|
um_feathers2.build.board=FEATHERS2
|
|
|
|
um_feathers2.build.cdc_on_boot=1
|
|
um_feathers2.build.msc_on_boot=0
|
|
um_feathers2.build.dfu_on_boot=0
|
|
um_feathers2.build.f_cpu=240000000L
|
|
um_feathers2.build.flash_size=16MB
|
|
um_feathers2.build.flash_freq=80m
|
|
um_feathers2.build.flash_mode=dio
|
|
um_feathers2.build.boot=qio
|
|
um_feathers2.build.partitions=fatflash
|
|
um_feathers2.build.defines=
|
|
|
|
um_feathers2.menu.CDCOnBoot.cdc=Enabled
|
|
um_feathers2.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
um_feathers2.menu.CDCOnBoot.default=Disabled
|
|
um_feathers2.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
um_feathers2.menu.MSCOnBoot.default=Disabled
|
|
um_feathers2.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
um_feathers2.menu.MSCOnBoot.msc=Enabled
|
|
um_feathers2.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
um_feathers2.menu.DFUOnBoot.default=Disabled
|
|
um_feathers2.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
um_feathers2.menu.DFUOnBoot.dfu=Enabled
|
|
um_feathers2.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
um_feathers2.menu.PSRAM.enabled=Enabled
|
|
um_feathers2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
um_feathers2.menu.PSRAM.disabled=Disabled
|
|
um_feathers2.menu.PSRAM.disabled.build.defines=
|
|
|
|
um_feathers2.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
um_feathers2.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
um_feathers2.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
um_feathers2.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
um_feathers2.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
um_feathers2.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
um_feathers2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
um_feathers2.menu.PartitionScheme.default.build.partitions=default
|
|
um_feathers2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
um_feathers2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
um_feathers2.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
um_feathers2.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
um_feathers2.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
um_feathers2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
um_feathers2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
um_feathers2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
um_feathers2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
um_feathers2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
um_feathers2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
um_feathers2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
um_feathers2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
um_feathers2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
um_feathers2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
um_feathers2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
um_feathers2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
um_feathers2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
um_feathers2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
um_feathers2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
um_feathers2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
um_feathers2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
um_feathers2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
um_feathers2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
um_feathers2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
um_feathers2.menu.CPUFreq.240=240MHz (WiFi)
|
|
um_feathers2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
um_feathers2.menu.CPUFreq.160=160MHz (WiFi)
|
|
um_feathers2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
um_feathers2.menu.CPUFreq.80=80MHz (WiFi)
|
|
um_feathers2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
um_feathers2.menu.CPUFreq.40=40MHz
|
|
um_feathers2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
um_feathers2.menu.CPUFreq.20=20MHz
|
|
um_feathers2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
um_feathers2.menu.CPUFreq.10=10MHz
|
|
um_feathers2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
um_feathers2.menu.FlashSize.16M=16MB (128Mb)
|
|
um_feathers2.menu.FlashSize.16M.build.flash_size=16MB
|
|
um_feathers2.menu.FlashSize.4M=4MB (32Mb)
|
|
um_feathers2.menu.FlashSize.4M.build.flash_size=4MB
|
|
um_feathers2.menu.FlashSize.8M=8MB (64Mb)
|
|
um_feathers2.menu.FlashSize.8M.build.flash_size=8MB
|
|
um_feathers2.menu.FlashSize.8M.build.partitions=default_8MB
|
|
um_feathers2.menu.FlashSize.2M=2MB (16Mb)
|
|
um_feathers2.menu.FlashSize.2M.build.flash_size=2MB
|
|
um_feathers2.menu.FlashSize.2M.build.partitions=minimal
|
|
|
|
um_feathers2.menu.UploadSpeed.921600=921600
|
|
um_feathers2.menu.UploadSpeed.921600.upload.speed=921600
|
|
um_feathers2.menu.UploadSpeed.115200=115200
|
|
um_feathers2.menu.UploadSpeed.115200.upload.speed=115200
|
|
um_feathers2.menu.UploadSpeed.256000.windows=256000
|
|
um_feathers2.menu.UploadSpeed.256000.upload.speed=256000
|
|
um_feathers2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
um_feathers2.menu.UploadSpeed.230400=230400
|
|
um_feathers2.menu.UploadSpeed.230400.upload.speed=230400
|
|
um_feathers2.menu.UploadSpeed.460800.linux=460800
|
|
um_feathers2.menu.UploadSpeed.460800.macosx=460800
|
|
um_feathers2.menu.UploadSpeed.460800.upload.speed=460800
|
|
|
|
um_feathers2.menu.DebugLevel.none=None
|
|
um_feathers2.menu.DebugLevel.none.build.code_debug=0
|
|
um_feathers2.menu.DebugLevel.error=Error
|
|
um_feathers2.menu.DebugLevel.error.build.code_debug=1
|
|
um_feathers2.menu.DebugLevel.warn=Warn
|
|
um_feathers2.menu.DebugLevel.warn.build.code_debug=2
|
|
um_feathers2.menu.DebugLevel.info=Info
|
|
um_feathers2.menu.DebugLevel.info.build.code_debug=3
|
|
um_feathers2.menu.DebugLevel.debug=Debug
|
|
um_feathers2.menu.DebugLevel.debug.build.code_debug=4
|
|
um_feathers2.menu.DebugLevel.verbose=Verbose
|
|
um_feathers2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
um_feathers2.menu.EraseFlash.none=Disabled
|
|
um_feathers2.menu.EraseFlash.none.upload.erase_cmd=
|
|
um_feathers2.menu.EraseFlash.all=Enabled
|
|
um_feathers2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
um_feathers2neo.name=UM FeatherS2 Neo
|
|
um_feathers2neo.vid.0=0x303a
|
|
um_feathers2neo.pid.0=0x80B4
|
|
um_feathers2neo.upload_port.0.vid=0x303a
|
|
um_feathers2neo.upload_port.0.pid=0x80B4
|
|
|
|
um_feathers2neo.bootloader.tool=esptool_py
|
|
um_feathers2neo.bootloader.tool.default=esptool_py
|
|
|
|
um_feathers2neo.upload.tool=esptool_py
|
|
um_feathers2neo.upload.tool.default=esptool_py
|
|
um_feathers2neo.upload.tool.network=esp_ota
|
|
|
|
um_feathers2neo.upload.maximum_size=1310720
|
|
um_feathers2neo.upload.maximum_data_size=327680
|
|
um_feathers2neo.upload.flags=
|
|
um_feathers2neo.upload.extra_flags=
|
|
um_feathers2neo.upload.use_1200bps_touch=true
|
|
um_feathers2neo.upload.wait_for_upload_port=true
|
|
|
|
um_feathers2neo.serial.disableDTR=false
|
|
um_feathers2neo.serial.disableRTS=false
|
|
|
|
um_feathers2neo.build.tarch=xtensa
|
|
um_feathers2neo.build.bootloader_addr=0x1000
|
|
um_feathers2neo.build.target=esp32s2
|
|
um_feathers2neo.build.mcu=esp32s2
|
|
um_feathers2neo.build.core=esp32
|
|
um_feathers2neo.build.variant=um_feathers2neo
|
|
um_feathers2neo.build.board=FEATHERS2NEO
|
|
|
|
um_feathers2neo.build.cdc_on_boot=1
|
|
um_feathers2neo.build.msc_on_boot=0
|
|
um_feathers2neo.build.dfu_on_boot=0
|
|
um_feathers2neo.build.f_cpu=240000000L
|
|
um_feathers2neo.build.flash_size=4MB
|
|
um_feathers2neo.build.flash_freq=80m
|
|
um_feathers2neo.build.flash_mode=dio
|
|
um_feathers2neo.build.boot=qio
|
|
um_feathers2neo.build.partitions=default
|
|
um_feathers2neo.build.defines=
|
|
|
|
um_feathers2neo.menu.CDCOnBoot.cdc=Enabled
|
|
um_feathers2neo.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
um_feathers2neo.menu.CDCOnBoot.default=Disabled
|
|
um_feathers2neo.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
um_feathers2neo.menu.MSCOnBoot.default=Disabled
|
|
um_feathers2neo.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
um_feathers2neo.menu.MSCOnBoot.msc=Enabled
|
|
um_feathers2neo.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
um_feathers2neo.menu.DFUOnBoot.default=Disabled
|
|
um_feathers2neo.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
um_feathers2neo.menu.DFUOnBoot.dfu=Enabled
|
|
um_feathers2neo.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
um_feathers2neo.menu.PSRAM.enabled=Enabled
|
|
um_feathers2neo.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
um_feathers2neo.menu.PSRAM.disabled=Disabled
|
|
um_feathers2neo.menu.PSRAM.disabled.build.defines=
|
|
|
|
um_feathers2neo.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
um_feathers2neo.menu.PartitionScheme.default.build.partitions=default
|
|
um_feathers2neo.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
um_feathers2neo.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
um_feathers2neo.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
um_feathers2neo.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
um_feathers2neo.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
um_feathers2neo.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
um_feathers2neo.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
um_feathers2neo.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
um_feathers2neo.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
um_feathers2neo.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
um_feathers2neo.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
um_feathers2neo.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
um_feathers2neo.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
um_feathers2neo.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
um_feathers2neo.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
um_feathers2neo.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
um_feathers2neo.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
um_feathers2neo.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
um_feathers2neo.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
um_feathers2neo.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
um_feathers2neo.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
um_feathers2neo.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
um_feathers2neo.menu.CPUFreq.240=240MHz (WiFi)
|
|
um_feathers2neo.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
um_feathers2neo.menu.CPUFreq.160=160MHz (WiFi)
|
|
um_feathers2neo.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
um_feathers2neo.menu.CPUFreq.80=80MHz (WiFi)
|
|
um_feathers2neo.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
um_feathers2neo.menu.CPUFreq.40=40MHz
|
|
um_feathers2neo.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
um_feathers2neo.menu.CPUFreq.20=20MHz
|
|
um_feathers2neo.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
um_feathers2neo.menu.CPUFreq.10=10MHz
|
|
um_feathers2neo.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
um_feathers2neo.menu.FlashSize.4M=4MB (32Mb)
|
|
um_feathers2neo.menu.FlashSize.4M.build.flash_size=4MB
|
|
um_feathers2neo.menu.FlashSize.2M=2MB (16Mb)
|
|
um_feathers2neo.menu.FlashSize.2M.build.flash_size=2MB
|
|
um_feathers2neo.menu.FlashSize.2M.build.partitions=minimal
|
|
|
|
um_feathers2neo.menu.UploadSpeed.921600=921600
|
|
um_feathers2neo.menu.UploadSpeed.921600.upload.speed=921600
|
|
um_feathers2neo.menu.UploadSpeed.115200=115200
|
|
um_feathers2neo.menu.UploadSpeed.115200.upload.speed=115200
|
|
um_feathers2neo.menu.UploadSpeed.256000.windows=256000
|
|
um_feathers2neo.menu.UploadSpeed.256000.upload.speed=256000
|
|
um_feathers2neo.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
um_feathers2neo.menu.UploadSpeed.230400=230400
|
|
um_feathers2neo.menu.UploadSpeed.230400.upload.speed=230400
|
|
um_feathers2neo.menu.UploadSpeed.460800.linux=460800
|
|
um_feathers2neo.menu.UploadSpeed.460800.macosx=460800
|
|
um_feathers2neo.menu.UploadSpeed.460800.upload.speed=460800
|
|
|
|
um_feathers2neo.menu.DebugLevel.none=None
|
|
um_feathers2neo.menu.DebugLevel.none.build.code_debug=0
|
|
um_feathers2neo.menu.DebugLevel.error=Error
|
|
um_feathers2neo.menu.DebugLevel.error.build.code_debug=1
|
|
um_feathers2neo.menu.DebugLevel.warn=Warn
|
|
um_feathers2neo.menu.DebugLevel.warn.build.code_debug=2
|
|
um_feathers2neo.menu.DebugLevel.info=Info
|
|
um_feathers2neo.menu.DebugLevel.info.build.code_debug=3
|
|
um_feathers2neo.menu.DebugLevel.debug=Debug
|
|
um_feathers2neo.menu.DebugLevel.debug.build.code_debug=4
|
|
um_feathers2neo.menu.DebugLevel.verbose=Verbose
|
|
um_feathers2neo.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
um_feathers2neo.menu.EraseFlash.none=Disabled
|
|
um_feathers2neo.menu.EraseFlash.none.upload.erase_cmd=
|
|
um_feathers2neo.menu.EraseFlash.all=Enabled
|
|
um_feathers2neo.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
um_feathers3.name=UM FeatherS3
|
|
um_feathers3.vid.0=0x303a
|
|
um_feathers3.pid.0=0x80D6
|
|
um_feathers3.upload_port.0.vid=0x303a
|
|
um_feathers3.upload_port.0.pid=0x80D6
|
|
|
|
um_feathers3.bootloader.tool=esptool_py
|
|
um_feathers3.bootloader.tool.default=esptool_py
|
|
|
|
um_feathers3.upload.tool=esptool_py
|
|
um_feathers3.upload.tool.default=esptool_py
|
|
um_feathers3.upload.tool.network=esp_ota
|
|
|
|
um_feathers3.upload.maximum_size=1310720
|
|
um_feathers3.upload.maximum_data_size=327680
|
|
um_feathers3.upload.flags=
|
|
um_feathers3.upload.extra_flags=
|
|
um_feathers3.upload.use_1200bps_touch=false
|
|
um_feathers3.upload.wait_for_upload_port=false
|
|
|
|
um_feathers3.serial.disableDTR=false
|
|
um_feathers3.serial.disableRTS=false
|
|
|
|
um_feathers3.build.tarch=xtensa
|
|
um_feathers3.build.bootloader_addr=0x0
|
|
um_feathers3.build.target=esp32s3
|
|
um_feathers3.build.mcu=esp32s3
|
|
um_feathers3.build.core=esp32
|
|
um_feathers3.build.variant=um_feathers3
|
|
um_feathers3.build.board=FEATHERS3
|
|
|
|
um_feathers3.build.usb_mode=1
|
|
um_feathers3.build.cdc_on_boot=1
|
|
um_feathers3.build.msc_on_boot=0
|
|
um_feathers3.build.dfu_on_boot=0
|
|
um_feathers3.build.f_cpu=240000000L
|
|
um_feathers3.build.flash_size=16MB
|
|
um_feathers3.build.flash_freq=80m
|
|
um_feathers3.build.flash_mode=dio
|
|
um_feathers3.build.boot=qio
|
|
um_feathers3.build.partitions=default
|
|
um_feathers3.build.defines=
|
|
um_feathers3.build.loop_core=
|
|
um_feathers3.build.event_core=
|
|
um_feathers3.build.flash_type=qio
|
|
um_feathers3.build.psram_type=qspi
|
|
um_feathers3.build.memory_type=qio_qspi
|
|
|
|
um_feathers3.menu.LoopCore.1=Core 1
|
|
um_feathers3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
um_feathers3.menu.LoopCore.0=Core 0
|
|
um_feathers3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
um_feathers3.menu.EventsCore.1=Core 1
|
|
um_feathers3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
um_feathers3.menu.EventsCore.0=Core 0
|
|
um_feathers3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
um_feathers3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
um_feathers3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
um_feathers3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
um_feathers3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
um_feathers3.menu.CDCOnBoot.cdc=Enabled
|
|
um_feathers3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
um_feathers3.menu.CDCOnBoot.default=Disabled
|
|
um_feathers3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
um_feathers3.menu.MSCOnBoot.default=Disabled
|
|
um_feathers3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
um_feathers3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
um_feathers3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
um_feathers3.menu.DFUOnBoot.default=Disabled
|
|
um_feathers3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
um_feathers3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
um_feathers3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
um_feathers3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
um_feathers3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
um_feathers3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
um_feathers3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
um_feathers3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
um_feathers3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
um_feathers3.menu.PSRAM.enabled=Enabled
|
|
um_feathers3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
um_feathers3.menu.PSRAM.disabled=Disabled
|
|
um_feathers3.menu.PSRAM.disabled.build.defines=
|
|
|
|
um_feathers3.menu.PartitionScheme.default_16MB=Default (6.25MB APP/3.43MB SPIFFS)
|
|
um_feathers3.menu.PartitionScheme.default_16MB.build.partitions=default_16MB
|
|
um_feathers3.menu.PartitionScheme.default_16MB.upload.maximum_size=6553600
|
|
um_feathers3.menu.PartitionScheme.tinyuf2=TinyUF2 Compatibility (2MB APP/12MB FFAT)
|
|
um_feathers3.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader_tinyuf2
|
|
um_feathers3.menu.PartitionScheme.tinyuf2.build.custom_partitions=partitions_tinyuf2
|
|
um_feathers3.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
um_feathers3.menu.PartitionScheme.tinyuf2.upload.maximum_size=2097152
|
|
um_feathers3.menu.PartitionScheme.large_spiffs=Large SPIFFS (4.5MB APP/6.93MB SPIFFS)
|
|
um_feathers3.menu.PartitionScheme.large_spiffs.build.partitions=large_spiffs_16MB
|
|
um_feathers3.menu.PartitionScheme.large_spiffs.upload.maximum_size=4718592
|
|
um_feathers3.menu.PartitionScheme.app3M_fat9M_16MB=FFAT (3MB APP/9MB FATFS)
|
|
um_feathers3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
um_feathers3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
um_feathers3.menu.PartitionScheme.fatflash=Large FFAT (2MB APP/12.5MB FATFS)
|
|
um_feathers3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
um_feathers3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
|
|
um_feathers3.menu.CPUFreq.240=240MHz (WiFi)
|
|
um_feathers3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
um_feathers3.menu.CPUFreq.160=160MHz (WiFi)
|
|
um_feathers3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
um_feathers3.menu.CPUFreq.80=80MHz (WiFi)
|
|
um_feathers3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
um_feathers3.menu.CPUFreq.40=40MHz
|
|
um_feathers3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
um_feathers3.menu.CPUFreq.20=20MHz
|
|
um_feathers3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
um_feathers3.menu.CPUFreq.10=10MHz
|
|
um_feathers3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
um_feathers3.menu.FlashMode.qio=QIO
|
|
um_feathers3.menu.FlashMode.qio.build.flash_mode=dio
|
|
um_feathers3.menu.FlashMode.qio.build.boot=qio
|
|
um_feathers3.menu.FlashMode.dio=DIO
|
|
um_feathers3.menu.FlashMode.dio.build.flash_mode=dio
|
|
um_feathers3.menu.FlashMode.dio.build.boot=dio
|
|
|
|
um_feathers3.menu.UploadSpeed.921600=921600
|
|
um_feathers3.menu.UploadSpeed.921600.upload.speed=921600
|
|
um_feathers3.menu.UploadSpeed.115200=115200
|
|
um_feathers3.menu.UploadSpeed.115200.upload.speed=115200
|
|
um_feathers3.menu.UploadSpeed.256000.windows=256000
|
|
um_feathers3.menu.UploadSpeed.256000.upload.speed=256000
|
|
um_feathers3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
um_feathers3.menu.UploadSpeed.230400=230400
|
|
um_feathers3.menu.UploadSpeed.230400.upload.speed=230400
|
|
um_feathers3.menu.UploadSpeed.460800.linux=460800
|
|
um_feathers3.menu.UploadSpeed.460800.macosx=460800
|
|
um_feathers3.menu.UploadSpeed.460800.upload.speed=460800
|
|
um_feathers3.menu.UploadSpeed.512000.windows=512000
|
|
um_feathers3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
um_feathers3.menu.DebugLevel.none=None
|
|
um_feathers3.menu.DebugLevel.none.build.code_debug=0
|
|
um_feathers3.menu.DebugLevel.error=Error
|
|
um_feathers3.menu.DebugLevel.error.build.code_debug=1
|
|
um_feathers3.menu.DebugLevel.warn=Warn
|
|
um_feathers3.menu.DebugLevel.warn.build.code_debug=2
|
|
um_feathers3.menu.DebugLevel.info=Info
|
|
um_feathers3.menu.DebugLevel.info.build.code_debug=3
|
|
um_feathers3.menu.DebugLevel.debug=Debug
|
|
um_feathers3.menu.DebugLevel.debug.build.code_debug=4
|
|
um_feathers3.menu.DebugLevel.verbose=Verbose
|
|
um_feathers3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
um_feathers3.menu.EraseFlash.none=Disabled
|
|
um_feathers3.menu.EraseFlash.none.upload.erase_cmd=
|
|
um_feathers3.menu.EraseFlash.all=Enabled
|
|
um_feathers3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
um_feathers3neo.name=UM FeatherS3 Neo
|
|
um_feathers3neo.vid.0=0x303a
|
|
um_feathers3neo.pid.0=0x81FB
|
|
um_feathers3neo.upload_port.0.vid=0x303a
|
|
um_feathers3neo.upload_port.0.pid=0x81FB
|
|
|
|
um_feathers3neo.bootloader.tool=esptool_py
|
|
um_feathers3neo.bootloader.tool.default=esptool_py
|
|
|
|
um_feathers3neo.upload.tool=esptool_py
|
|
um_feathers3neo.upload.tool.default=esptool_py
|
|
um_feathers3neo.upload.tool.network=esp_ota
|
|
|
|
um_feathers3neo.upload.maximum_size=1310720
|
|
um_feathers3neo.upload.maximum_data_size=327680
|
|
um_feathers3neo.upload.flags=
|
|
um_feathers3neo.upload.extra_flags=
|
|
um_feathers3neo.upload.use_1200bps_touch=false
|
|
um_feathers3neo.upload.wait_for_upload_port=false
|
|
|
|
um_feathers3neo.serial.disableDTR=false
|
|
um_feathers3neo.serial.disableRTS=false
|
|
|
|
um_feathers3neo.build.tarch=xtensa
|
|
um_feathers3neo.build.bootloader_addr=0x0
|
|
um_feathers3neo.build.target=esp32s3
|
|
um_feathers3neo.build.mcu=esp32s3
|
|
um_feathers3neo.build.core=esp32
|
|
um_feathers3neo.build.variant=um_feathers3neo
|
|
um_feathers3neo.build.board=FEATHERS3NEO
|
|
|
|
um_feathers3neo.build.usb_mode=1
|
|
um_feathers3neo.build.cdc_on_boot=1
|
|
um_feathers3neo.build.msc_on_boot=0
|
|
um_feathers3neo.build.dfu_on_boot=0
|
|
um_feathers3neo.build.f_cpu=240000000L
|
|
um_feathers3neo.build.flash_size=16MB
|
|
um_feathers3neo.build.flash_freq=80m
|
|
um_feathers3neo.build.flash_mode=dio
|
|
um_feathers3neo.build.boot=qio
|
|
um_feathers3neo.build.partitions=default
|
|
um_feathers3neo.build.defines=
|
|
um_feathers3neo.build.loop_core=
|
|
um_feathers3neo.build.event_core=
|
|
um_feathers3neo.build.flash_type=qio
|
|
um_feathers3neo.build.psram_type=qspi
|
|
um_feathers3neo.build.memory_type=qio_qspi
|
|
|
|
um_feathers3neo.menu.LoopCore.1=Core 1
|
|
um_feathers3neo.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
um_feathers3neo.menu.LoopCore.0=Core 0
|
|
um_feathers3neo.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
um_feathers3neo.menu.EventsCore.1=Core 1
|
|
um_feathers3neo.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
um_feathers3neo.menu.EventsCore.0=Core 0
|
|
um_feathers3neo.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
um_feathers3neo.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
um_feathers3neo.menu.USBMode.hwcdc.build.usb_mode=1
|
|
um_feathers3neo.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
um_feathers3neo.menu.USBMode.default.build.usb_mode=0
|
|
|
|
um_feathers3neo.menu.CDCOnBoot.cdc=Enabled
|
|
um_feathers3neo.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
um_feathers3neo.menu.CDCOnBoot.default=Disabled
|
|
um_feathers3neo.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
um_feathers3neo.menu.MSCOnBoot.default=Disabled
|
|
um_feathers3neo.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
um_feathers3neo.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
um_feathers3neo.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
um_feathers3neo.menu.DFUOnBoot.default=Disabled
|
|
um_feathers3neo.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
um_feathers3neo.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
um_feathers3neo.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
um_feathers3neo.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
um_feathers3neo.menu.UploadMode.default=UART0 / Hardware CDC
|
|
um_feathers3neo.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
um_feathers3neo.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
um_feathers3neo.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
um_feathers3neo.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
um_feathers3neo.menu.PSRAM.enabled=Enabled
|
|
um_feathers3neo.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
um_feathers3neo.menu.PSRAM.disabled=Disabled
|
|
um_feathers3neo.menu.PSRAM.disabled.build.defines=
|
|
|
|
um_feathers3neo.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
um_feathers3neo.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
um_feathers3neo.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
um_feathers3neo.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
um_feathers3neo.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
um_feathers3neo.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
um_feathers3neo.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
um_feathers3neo.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
um_feathers3neo.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
um_feathers3neo.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
um_feathers3neo.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
um_feathers3neo.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
um_feathers3neo.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
um_feathers3neo.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
um_feathers3neo.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
um_feathers3neo.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
um_feathers3neo.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
um_feathers3neo.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
um_feathers3neo.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
um_feathers3neo.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
um_feathers3neo.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
um_feathers3neo.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
um_feathers3neo.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
um_feathers3neo.menu.CPUFreq.240=240MHz (WiFi)
|
|
um_feathers3neo.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
um_feathers3neo.menu.CPUFreq.160=160MHz (WiFi)
|
|
um_feathers3neo.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
um_feathers3neo.menu.CPUFreq.80=80MHz (WiFi)
|
|
um_feathers3neo.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
um_feathers3neo.menu.CPUFreq.40=40MHz
|
|
um_feathers3neo.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
um_feathers3neo.menu.CPUFreq.20=20MHz
|
|
um_feathers3neo.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
um_feathers3neo.menu.CPUFreq.10=10MHz
|
|
um_feathers3neo.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
um_feathers3neo.menu.FlashMode.qio=QIO
|
|
um_feathers3neo.menu.FlashMode.qio.build.flash_mode=dio
|
|
um_feathers3neo.menu.FlashMode.qio.build.boot=qio
|
|
um_feathers3neo.menu.FlashMode.dio=DIO
|
|
um_feathers3neo.menu.FlashMode.dio.build.flash_mode=dio
|
|
um_feathers3neo.menu.FlashMode.dio.build.boot=dio
|
|
|
|
um_feathers3neo.menu.UploadSpeed.921600=921600
|
|
um_feathers3neo.menu.UploadSpeed.921600.upload.speed=921600
|
|
um_feathers3neo.menu.UploadSpeed.115200=115200
|
|
um_feathers3neo.menu.UploadSpeed.115200.upload.speed=115200
|
|
um_feathers3neo.menu.UploadSpeed.256000.windows=256000
|
|
um_feathers3neo.menu.UploadSpeed.256000.upload.speed=256000
|
|
um_feathers3neo.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
um_feathers3neo.menu.UploadSpeed.230400=230400
|
|
um_feathers3neo.menu.UploadSpeed.230400.upload.speed=230400
|
|
um_feathers3neo.menu.UploadSpeed.460800.linux=460800
|
|
um_feathers3neo.menu.UploadSpeed.460800.macosx=460800
|
|
um_feathers3neo.menu.UploadSpeed.460800.upload.speed=460800
|
|
um_feathers3neo.menu.UploadSpeed.512000.windows=512000
|
|
um_feathers3neo.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
um_feathers3neo.menu.DebugLevel.none=None
|
|
um_feathers3neo.menu.DebugLevel.none.build.code_debug=0
|
|
um_feathers3neo.menu.DebugLevel.error=Error
|
|
um_feathers3neo.menu.DebugLevel.error.build.code_debug=1
|
|
um_feathers3neo.menu.DebugLevel.warn=Warn
|
|
um_feathers3neo.menu.DebugLevel.warn.build.code_debug=2
|
|
um_feathers3neo.menu.DebugLevel.info=Info
|
|
um_feathers3neo.menu.DebugLevel.info.build.code_debug=3
|
|
um_feathers3neo.menu.DebugLevel.debug=Debug
|
|
um_feathers3neo.menu.DebugLevel.debug.build.code_debug=4
|
|
um_feathers3neo.menu.DebugLevel.verbose=Verbose
|
|
um_feathers3neo.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
um_feathers3neo.menu.EraseFlash.none=Disabled
|
|
um_feathers3neo.menu.EraseFlash.none.upload.erase_cmd=
|
|
um_feathers3neo.menu.EraseFlash.all=Enabled
|
|
um_feathers3neo.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
um_nanos3.name=UM NanoS3
|
|
um_nanos3.vid.0=0x303a
|
|
um_nanos3.pid.0=0x8179
|
|
um_nanos3.upload_port.0.vid=0x303a
|
|
um_nanos3.upload_port.0.pid=0x8179
|
|
|
|
um_nanos3.bootloader.tool=esptool_py
|
|
um_nanos3.bootloader.tool.default=esptool_py
|
|
|
|
um_nanos3.upload.tool=esptool_py
|
|
um_nanos3.upload.tool.default=esptool_py
|
|
um_nanos3.upload.tool.network=esp_ota
|
|
|
|
um_nanos3.upload.maximum_size=1310720
|
|
um_nanos3.upload.maximum_data_size=327680
|
|
um_nanos3.upload.flags=
|
|
um_nanos3.upload.extra_flags=
|
|
um_nanos3.upload.use_1200bps_touch=false
|
|
um_nanos3.upload.wait_for_upload_port=false
|
|
|
|
um_nanos3.serial.disableDTR=false
|
|
um_nanos3.serial.disableRTS=false
|
|
|
|
um_nanos3.build.tarch=xtensa
|
|
um_nanos3.build.bootloader_addr=0x0
|
|
um_nanos3.build.target=esp32s3
|
|
um_nanos3.build.mcu=esp32s3
|
|
um_nanos3.build.core=esp32
|
|
um_nanos3.build.variant=um_nanos3
|
|
um_nanos3.build.board=NANOS3
|
|
|
|
um_nanos3.build.usb_mode=1
|
|
um_nanos3.build.cdc_on_boot=1
|
|
um_nanos3.build.msc_on_boot=0
|
|
um_nanos3.build.dfu_on_boot=0
|
|
um_nanos3.build.f_cpu=240000000L
|
|
um_nanos3.build.flash_size=8MB
|
|
um_nanos3.build.flash_freq=80m
|
|
um_nanos3.build.flash_mode=dio
|
|
um_nanos3.build.boot=qio
|
|
um_nanos3.build.partitions=default
|
|
um_nanos3.build.defines=
|
|
um_nanos3.build.loop_core=
|
|
um_nanos3.build.event_core=
|
|
um_nanos3.build.flash_type=qio
|
|
um_nanos3.build.psram_type=qspi
|
|
um_nanos3.build.memory_type=qio_qspi
|
|
|
|
um_nanos3.menu.LoopCore.1=Core 1
|
|
um_nanos3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
um_nanos3.menu.LoopCore.0=Core 0
|
|
um_nanos3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
um_nanos3.menu.EventsCore.1=Core 1
|
|
um_nanos3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
um_nanos3.menu.EventsCore.0=Core 0
|
|
um_nanos3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
um_nanos3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
um_nanos3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
um_nanos3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
um_nanos3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
um_nanos3.menu.CDCOnBoot.cdc=Enabled
|
|
um_nanos3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
um_nanos3.menu.CDCOnBoot.default=Disabled
|
|
um_nanos3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
um_nanos3.menu.MSCOnBoot.default=Disabled
|
|
um_nanos3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
um_nanos3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
um_nanos3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
um_nanos3.menu.DFUOnBoot.default=Disabled
|
|
um_nanos3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
um_nanos3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
um_nanos3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
um_nanos3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
um_nanos3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
um_nanos3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
um_nanos3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
um_nanos3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
um_nanos3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
um_nanos3.menu.PSRAM.enabled=Enabled
|
|
um_nanos3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
um_nanos3.menu.PSRAM.disabled=Disabled
|
|
um_nanos3.menu.PSRAM.disabled.build.defines=
|
|
|
|
um_nanos3.menu.PartitionScheme.default_8MB=Default (3MB APP/1.5MB SPIFFS)
|
|
um_nanos3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
um_nanos3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
um_nanos3.menu.PartitionScheme.tinyuf2=TinyUF2 Compatibility (2MB APP/3.7MB FFAT)
|
|
um_nanos3.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader_tinyuf2
|
|
um_nanos3.menu.PartitionScheme.tinyuf2.build.custom_partitions=partitions_tinyuf2
|
|
um_nanos3.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
um_nanos3.menu.PartitionScheme.tinyuf2.upload.maximum_size=2097152
|
|
|
|
um_nanos3.menu.CPUFreq.240=240MHz (WiFi)
|
|
um_nanos3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
um_nanos3.menu.CPUFreq.160=160MHz (WiFi)
|
|
um_nanos3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
um_nanos3.menu.CPUFreq.80=80MHz (WiFi)
|
|
um_nanos3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
um_nanos3.menu.CPUFreq.40=40MHz
|
|
um_nanos3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
um_nanos3.menu.CPUFreq.20=20MHz
|
|
um_nanos3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
um_nanos3.menu.CPUFreq.10=10MHz
|
|
um_nanos3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
um_nanos3.menu.FlashMode.qio=QIO
|
|
um_nanos3.menu.FlashMode.qio.build.flash_mode=dio
|
|
um_nanos3.menu.FlashMode.qio.build.boot=qio
|
|
um_nanos3.menu.FlashMode.dio=DIO
|
|
um_nanos3.menu.FlashMode.dio.build.flash_mode=dio
|
|
um_nanos3.menu.FlashMode.dio.build.boot=dio
|
|
|
|
um_nanos3.menu.UploadSpeed.921600=921600
|
|
um_nanos3.menu.UploadSpeed.921600.upload.speed=921600
|
|
um_nanos3.menu.UploadSpeed.115200=115200
|
|
um_nanos3.menu.UploadSpeed.115200.upload.speed=115200
|
|
um_nanos3.menu.UploadSpeed.256000.windows=256000
|
|
um_nanos3.menu.UploadSpeed.256000.upload.speed=256000
|
|
um_nanos3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
um_nanos3.menu.UploadSpeed.230400=230400
|
|
um_nanos3.menu.UploadSpeed.230400.upload.speed=230400
|
|
um_nanos3.menu.UploadSpeed.460800.linux=460800
|
|
um_nanos3.menu.UploadSpeed.460800.macosx=460800
|
|
um_nanos3.menu.UploadSpeed.460800.upload.speed=460800
|
|
um_nanos3.menu.UploadSpeed.512000.windows=512000
|
|
um_nanos3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
um_nanos3.menu.DebugLevel.none=None
|
|
um_nanos3.menu.DebugLevel.none.build.code_debug=0
|
|
um_nanos3.menu.DebugLevel.error=Error
|
|
um_nanos3.menu.DebugLevel.error.build.code_debug=1
|
|
um_nanos3.menu.DebugLevel.warn=Warn
|
|
um_nanos3.menu.DebugLevel.warn.build.code_debug=2
|
|
um_nanos3.menu.DebugLevel.info=Info
|
|
um_nanos3.menu.DebugLevel.info.build.code_debug=3
|
|
um_nanos3.menu.DebugLevel.debug=Debug
|
|
um_nanos3.menu.DebugLevel.debug.build.code_debug=4
|
|
um_nanos3.menu.DebugLevel.verbose=Verbose
|
|
um_nanos3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
um_nanos3.menu.EraseFlash.none=Disabled
|
|
um_nanos3.menu.EraseFlash.none.upload.erase_cmd=
|
|
um_nanos3.menu.EraseFlash.all=Enabled
|
|
um_nanos3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
um_pros3.name=UM PROS3
|
|
um_pros3.vid.0=0x303a
|
|
um_pros3.pid.0=0x80D3
|
|
um_pros3.upload_port.0.vid=0x303a
|
|
um_pros3.upload_port.0.pid=0x80D3
|
|
|
|
um_pros3.bootloader.tool=esptool_py
|
|
um_pros3.bootloader.tool.default=esptool_py
|
|
|
|
um_pros3.upload.tool=esptool_py
|
|
um_pros3.upload.tool.default=esptool_py
|
|
um_pros3.upload.tool.network=esp_ota
|
|
|
|
um_pros3.upload.maximum_size=1310720
|
|
um_pros3.upload.maximum_data_size=327680
|
|
um_pros3.upload.flags=
|
|
um_pros3.upload.extra_flags=
|
|
um_pros3.upload.use_1200bps_touch=false
|
|
um_pros3.upload.wait_for_upload_port=false
|
|
|
|
um_pros3.serial.disableDTR=false
|
|
um_pros3.serial.disableRTS=false
|
|
|
|
um_pros3.build.tarch=xtensa
|
|
um_pros3.build.bootloader_addr=0x0
|
|
um_pros3.build.target=esp32s3
|
|
um_pros3.build.mcu=esp32s3
|
|
um_pros3.build.core=esp32
|
|
um_pros3.build.variant=um_pros3
|
|
um_pros3.build.board=PROS3
|
|
|
|
um_pros3.build.usb_mode=1
|
|
um_pros3.build.cdc_on_boot=1
|
|
um_pros3.build.msc_on_boot=0
|
|
um_pros3.build.dfu_on_boot=0
|
|
um_pros3.build.f_cpu=240000000L
|
|
um_pros3.build.flash_size=16MB
|
|
um_pros3.build.flash_freq=80m
|
|
um_pros3.build.flash_mode=dio
|
|
um_pros3.build.boot=qio
|
|
um_pros3.build.partitions=default
|
|
um_pros3.build.defines=
|
|
um_pros3.build.loop_core=
|
|
um_pros3.build.event_core=
|
|
um_pros3.build.flash_type=qio
|
|
um_pros3.build.psram_type=qspi
|
|
um_pros3.build.memory_type=qio_qspi
|
|
|
|
um_pros3.menu.LoopCore.1=Core 1
|
|
um_pros3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
um_pros3.menu.LoopCore.0=Core 0
|
|
um_pros3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
um_pros3.menu.EventsCore.1=Core 1
|
|
um_pros3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
um_pros3.menu.EventsCore.0=Core 0
|
|
um_pros3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
um_pros3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
um_pros3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
um_pros3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
um_pros3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
um_pros3.menu.CDCOnBoot.cdc=Enabled
|
|
um_pros3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
um_pros3.menu.CDCOnBoot.default=Disabled
|
|
um_pros3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
um_pros3.menu.MSCOnBoot.default=Disabled
|
|
um_pros3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
um_pros3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
um_pros3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
um_pros3.menu.DFUOnBoot.default=Disabled
|
|
um_pros3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
um_pros3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
um_pros3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
um_pros3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
um_pros3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
um_pros3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
um_pros3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
um_pros3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
um_pros3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
um_pros3.menu.PSRAM.enabled=Enabled
|
|
um_pros3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
um_pros3.menu.PSRAM.disabled=Disabled
|
|
um_pros3.menu.PSRAM.disabled.build.defines=
|
|
|
|
um_pros3.menu.PartitionScheme.default_16MB=Default (6.25MB APP/3.43MB SPIFFS)
|
|
um_pros3.menu.PartitionScheme.default_16MB.build.partitions=default_16MB
|
|
um_pros3.menu.PartitionScheme.default_16MB.upload.maximum_size=6553600
|
|
um_pros3.menu.PartitionScheme.tinyuf2=TinyUF2 Compatibility (2MB APP/12MB FFAT)
|
|
um_pros3.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader_tinyuf2
|
|
um_pros3.menu.PartitionScheme.tinyuf2.build.custom_partitions=partitions_tinyuf2
|
|
um_pros3.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
um_pros3.menu.PartitionScheme.tinyuf2.upload.maximum_size=2097152
|
|
um_pros3.menu.PartitionScheme.large_spiffs=Large SPIFFS (4.5MB APP/6.93MB SPIFFS)
|
|
um_pros3.menu.PartitionScheme.large_spiffs.build.partitions=large_spiffs_16MB
|
|
um_pros3.menu.PartitionScheme.large_spiffs.upload.maximum_size=4718592
|
|
um_pros3.menu.PartitionScheme.app3M_fat9M_16MB=FFAT (3MB APP/9MB FATFS)
|
|
um_pros3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
um_pros3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
um_pros3.menu.PartitionScheme.fatflash=Large FFAT (2MB APP/12.5MB FATFS)
|
|
um_pros3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
um_pros3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
|
|
um_pros3.menu.CPUFreq.240=240MHz (WiFi)
|
|
um_pros3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
um_pros3.menu.CPUFreq.160=160MHz (WiFi)
|
|
um_pros3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
um_pros3.menu.CPUFreq.80=80MHz (WiFi)
|
|
um_pros3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
um_pros3.menu.CPUFreq.40=40MHz
|
|
um_pros3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
um_pros3.menu.CPUFreq.20=20MHz
|
|
um_pros3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
um_pros3.menu.CPUFreq.10=10MHz
|
|
um_pros3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
um_pros3.menu.FlashMode.qio=QIO
|
|
um_pros3.menu.FlashMode.qio.build.flash_mode=dio
|
|
um_pros3.menu.FlashMode.qio.build.boot=qio
|
|
um_pros3.menu.FlashMode.dio=DIO
|
|
um_pros3.menu.FlashMode.dio.build.flash_mode=dio
|
|
um_pros3.menu.FlashMode.dio.build.boot=dio
|
|
|
|
um_pros3.menu.UploadSpeed.921600=921600
|
|
um_pros3.menu.UploadSpeed.921600.upload.speed=921600
|
|
um_pros3.menu.UploadSpeed.115200=115200
|
|
um_pros3.menu.UploadSpeed.115200.upload.speed=115200
|
|
um_pros3.menu.UploadSpeed.256000.windows=256000
|
|
um_pros3.menu.UploadSpeed.256000.upload.speed=256000
|
|
um_pros3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
um_pros3.menu.UploadSpeed.230400=230400
|
|
um_pros3.menu.UploadSpeed.230400.upload.speed=230400
|
|
um_pros3.menu.UploadSpeed.460800.linux=460800
|
|
um_pros3.menu.UploadSpeed.460800.macosx=460800
|
|
um_pros3.menu.UploadSpeed.460800.upload.speed=460800
|
|
um_pros3.menu.UploadSpeed.512000.windows=512000
|
|
um_pros3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
um_pros3.menu.DebugLevel.none=None
|
|
um_pros3.menu.DebugLevel.none.build.code_debug=0
|
|
um_pros3.menu.DebugLevel.error=Error
|
|
um_pros3.menu.DebugLevel.error.build.code_debug=1
|
|
um_pros3.menu.DebugLevel.warn=Warn
|
|
um_pros3.menu.DebugLevel.warn.build.code_debug=2
|
|
um_pros3.menu.DebugLevel.info=Info
|
|
um_pros3.menu.DebugLevel.info.build.code_debug=3
|
|
um_pros3.menu.DebugLevel.debug=Debug
|
|
um_pros3.menu.DebugLevel.debug.build.code_debug=4
|
|
um_pros3.menu.DebugLevel.verbose=Verbose
|
|
um_pros3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
um_pros3.menu.EraseFlash.none=Disabled
|
|
um_pros3.menu.EraseFlash.none.upload.erase_cmd=
|
|
um_pros3.menu.EraseFlash.all=Enabled
|
|
um_pros3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
um_tinypico.name=UM TinyPICO
|
|
|
|
um_tinypico.bootloader.tool=esptool_py
|
|
um_tinypico.bootloader.tool.default=esptool_py
|
|
|
|
um_tinypico.upload.tool=esptool_py
|
|
um_tinypico.upload.tool.default=esptool_py
|
|
um_tinypico.upload.tool.network=esp_ota
|
|
|
|
um_tinypico.upload.maximum_size=1310720
|
|
um_tinypico.upload.maximum_data_size=327680
|
|
um_tinypico.upload.flags=
|
|
um_tinypico.upload.extra_flags=
|
|
|
|
um_tinypico.serial.disableDTR=true
|
|
um_tinypico.serial.disableRTS=true
|
|
|
|
um_tinypico.build.tarch=xtensa
|
|
um_tinypico.build.bootloader_addr=0x1000
|
|
um_tinypico.build.target=esp32
|
|
um_tinypico.build.mcu=esp32
|
|
um_tinypico.build.core=esp32
|
|
um_tinypico.build.variant=um_tinypico
|
|
um_tinypico.build.board=TINYPICO
|
|
|
|
um_tinypico.build.f_cpu=240000000L
|
|
um_tinypico.build.flash_size=4MB
|
|
um_tinypico.build.flash_freq=80m
|
|
um_tinypico.build.flash_mode=dio
|
|
um_tinypico.build.boot=dio
|
|
um_tinypico.build.partitions=default
|
|
um_tinypico.build.defines=
|
|
|
|
um_tinypico.menu.PartitionScheme.default=Default
|
|
um_tinypico.menu.PartitionScheme.default.build.partitions=default
|
|
um_tinypico.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
um_tinypico.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
um_tinypico.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
um_tinypico.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
um_tinypico.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
um_tinypico.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
um_tinypico.menu.UploadSpeed.921600=921600
|
|
um_tinypico.menu.UploadSpeed.921600.upload.speed=921600
|
|
um_tinypico.menu.UploadSpeed.115200=115200
|
|
um_tinypico.menu.UploadSpeed.115200.upload.speed=115200
|
|
um_tinypico.menu.UploadSpeed.256000.windows=256000
|
|
um_tinypico.menu.UploadSpeed.256000.upload.speed=256000
|
|
um_tinypico.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
um_tinypico.menu.UploadSpeed.230400=230400
|
|
um_tinypico.menu.UploadSpeed.230400.upload.speed=230400
|
|
um_tinypico.menu.UploadSpeed.460800.linux=460800
|
|
um_tinypico.menu.UploadSpeed.460800.macosx=460800
|
|
um_tinypico.menu.UploadSpeed.460800.upload.speed=460800
|
|
um_tinypico.menu.UploadSpeed.512000.windows=512000
|
|
um_tinypico.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
um_tinypico.menu.FlashMode.qio=QIO
|
|
um_tinypico.menu.FlashMode.qio.build.flash_mode=dio
|
|
um_tinypico.menu.FlashMode.qio.build.boot=qio
|
|
um_tinypico.menu.FlashMode.dio=DIO
|
|
um_tinypico.menu.FlashMode.dio.build.flash_mode=dio
|
|
um_tinypico.menu.FlashMode.dio.build.boot=dio
|
|
|
|
um_tinypico.menu.FlashFreq.80=80MHz
|
|
um_tinypico.menu.FlashFreq.80.build.flash_freq=80m
|
|
um_tinypico.menu.FlashFreq.40=40MHz
|
|
um_tinypico.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
um_tinypico.menu.PSRAM.enabled=Enabled
|
|
um_tinypico.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
um_tinypico.menu.PSRAM.enabled.build.extra_libs=
|
|
um_tinypico.menu.PSRAM.disabled=Disabled
|
|
um_tinypico.menu.PSRAM.disabled.build.defines=
|
|
um_tinypico.menu.PSRAM.disabled.build.extra_libs=
|
|
|
|
um_tinypico.menu.DebugLevel.none=None
|
|
um_tinypico.menu.DebugLevel.none.build.code_debug=0
|
|
um_tinypico.menu.DebugLevel.error=Error
|
|
um_tinypico.menu.DebugLevel.error.build.code_debug=1
|
|
um_tinypico.menu.DebugLevel.warn=Warn
|
|
um_tinypico.menu.DebugLevel.warn.build.code_debug=2
|
|
um_tinypico.menu.DebugLevel.info=Info
|
|
um_tinypico.menu.DebugLevel.info.build.code_debug=3
|
|
um_tinypico.menu.DebugLevel.debug=Debug
|
|
um_tinypico.menu.DebugLevel.debug.build.code_debug=4
|
|
um_tinypico.menu.DebugLevel.verbose=Verbose
|
|
um_tinypico.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
um_tinypico.menu.EraseFlash.none=Disabled
|
|
um_tinypico.menu.EraseFlash.none.upload.erase_cmd=
|
|
um_tinypico.menu.EraseFlash.all=Enabled
|
|
um_tinypico.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
um_tinyc6.name=UM TinyC6
|
|
|
|
um_tinyc6.bootloader.tool=esptool_py
|
|
um_tinyc6.bootloader.tool.default=esptool_py
|
|
|
|
um_tinyc6.upload.tool=esptool_py
|
|
um_tinyc6.upload.tool.default=esptool_py
|
|
um_tinyc6.upload.tool.network=esp_ota
|
|
|
|
um_tinyc6.upload.maximum_size=1310720
|
|
um_tinyc6.upload.maximum_data_size=327680
|
|
um_tinyc6.upload.flags=
|
|
um_tinyc6.upload.extra_flags=
|
|
um_tinyc6.upload.use_1200bps_touch=false
|
|
um_tinyc6.upload.wait_for_upload_port=false
|
|
|
|
um_tinyc6.serial.disableDTR=false
|
|
um_tinyc6.serial.disableRTS=false
|
|
|
|
um_tinyc6.build.tarch=riscv32
|
|
um_tinyc6.build.target=esp
|
|
um_tinyc6.build.mcu=esp32c6
|
|
um_tinyc6.build.core=esp32
|
|
um_tinyc6.build.variant=um_tinyc6
|
|
um_tinyc6.build.board=TINYC6
|
|
um_tinyc6.build.bootloader_addr=0x0
|
|
|
|
um_tinyc6.build.cdc_on_boot=1
|
|
um_tinyc6.build.f_cpu=160000000L
|
|
um_tinyc6.build.flash_size=4MB
|
|
um_tinyc6.build.flash_freq=80m
|
|
um_tinyc6.build.flash_mode=qio
|
|
um_tinyc6.build.boot=qio
|
|
um_tinyc6.build.partitions=default
|
|
um_tinyc6.build.defines=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
um_tinyc6.menu.JTAGAdapter.default=Disabled
|
|
um_tinyc6.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
um_tinyc6.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
um_tinyc6.menu.JTAGAdapter.builtin.build.openocdscript=esp32c6-builtin.cfg
|
|
um_tinyc6.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
um_tinyc6.menu.JTAGAdapter.external=FTDI Adapter
|
|
um_tinyc6.menu.JTAGAdapter.external.build.openocdscript=esp32c6-ftdi.cfg
|
|
um_tinyc6.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
um_tinyc6.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
um_tinyc6.menu.JTAGAdapter.bridge.build.openocdscript=esp32c6-bridge.cfg
|
|
um_tinyc6.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
um_tinyc6.menu.CDCOnBoot.cdc=Enabled
|
|
um_tinyc6.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
um_tinyc6.menu.CDCOnBoot.default=Disabled
|
|
um_tinyc6.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
um_tinyc6.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
um_tinyc6.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
um_tinyc6.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
um_tinyc6.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
um_tinyc6.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
um_tinyc6.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
um_tinyc6.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
um_tinyc6.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
um_tinyc6.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
um_tinyc6.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
um_tinyc6.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
um_tinyc6.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
um_tinyc6.menu.PartitionScheme.zigbee=Zigbee 4MB with spiffs
|
|
um_tinyc6.menu.PartitionScheme.zigbee.build.partitions=zigbee
|
|
um_tinyc6.menu.PartitionScheme.zigbee.upload.maximum_size=1310720
|
|
um_tinyc6.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
um_tinyc6.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
um_tinyc6.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
um_tinyc6.menu.PartitionScheme.custom=Custom
|
|
um_tinyc6.menu.PartitionScheme.custom.build.partitions=
|
|
um_tinyc6.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
um_tinyc6.menu.CPUFreq.160=160MHz (WiFi)
|
|
um_tinyc6.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
um_tinyc6.menu.CPUFreq.80=80MHz (WiFi)
|
|
um_tinyc6.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
um_tinyc6.menu.CPUFreq.40=40MHz
|
|
um_tinyc6.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
um_tinyc6.menu.CPUFreq.20=20MHz
|
|
um_tinyc6.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
um_tinyc6.menu.CPUFreq.10=10MHz
|
|
um_tinyc6.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
um_tinyc6.menu.FlashMode.qio=QIO
|
|
um_tinyc6.menu.FlashMode.qio.build.flash_mode=dio
|
|
um_tinyc6.menu.FlashMode.qio.build.boot=qio
|
|
um_tinyc6.menu.FlashMode.dio=DIO
|
|
um_tinyc6.menu.FlashMode.dio.build.flash_mode=dio
|
|
um_tinyc6.menu.FlashMode.dio.build.boot=dio
|
|
|
|
um_tinyc6.menu.FlashFreq.80=80MHz
|
|
um_tinyc6.menu.FlashFreq.80.build.flash_freq=80m
|
|
um_tinyc6.menu.FlashFreq.40=40MHz
|
|
um_tinyc6.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
um_tinyc6.menu.FlashSize.8M=8MB (64Mb)
|
|
um_tinyc6.menu.FlashSize.8M.build.flash_size=8MB
|
|
um_tinyc6.menu.FlashSize.8M.build.partitions=default_8MB
|
|
|
|
um_tinyc6.menu.UploadSpeed.921600=921600
|
|
um_tinyc6.menu.UploadSpeed.921600.upload.speed=921600
|
|
um_tinyc6.menu.UploadSpeed.115200=115200
|
|
um_tinyc6.menu.UploadSpeed.115200.upload.speed=115200
|
|
um_tinyc6.menu.UploadSpeed.256000.windows=256000
|
|
um_tinyc6.menu.UploadSpeed.256000.upload.speed=256000
|
|
um_tinyc6.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
um_tinyc6.menu.UploadSpeed.230400=230400
|
|
um_tinyc6.menu.UploadSpeed.230400.upload.speed=230400
|
|
um_tinyc6.menu.UploadSpeed.460800.linux=460800
|
|
um_tinyc6.menu.UploadSpeed.460800.macosx=460800
|
|
um_tinyc6.menu.UploadSpeed.460800.upload.speed=460800
|
|
um_tinyc6.menu.UploadSpeed.512000.windows=512000
|
|
um_tinyc6.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
um_tinyc6.menu.DebugLevel.none=None
|
|
um_tinyc6.menu.DebugLevel.none.build.code_debug=0
|
|
um_tinyc6.menu.DebugLevel.error=Error
|
|
um_tinyc6.menu.DebugLevel.error.build.code_debug=1
|
|
um_tinyc6.menu.DebugLevel.warn=Warn
|
|
um_tinyc6.menu.DebugLevel.warn.build.code_debug=2
|
|
um_tinyc6.menu.DebugLevel.info=Info
|
|
um_tinyc6.menu.DebugLevel.info.build.code_debug=3
|
|
um_tinyc6.menu.DebugLevel.debug=Debug
|
|
um_tinyc6.menu.DebugLevel.debug.build.code_debug=4
|
|
um_tinyc6.menu.DebugLevel.verbose=Verbose
|
|
um_tinyc6.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
um_tinyc6.menu.EraseFlash.none=Disabled
|
|
um_tinyc6.menu.EraseFlash.none.upload.erase_cmd=
|
|
um_tinyc6.menu.EraseFlash.all=Enabled
|
|
um_tinyc6.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
um_tinyc6.menu.ZigbeeMode.default=Disabled
|
|
um_tinyc6.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
um_tinyc6.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
um_tinyc6.menu.ZigbeeMode.ed=Zigbee ED (end device)
|
|
um_tinyc6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
|
|
um_tinyc6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
|
|
um_tinyc6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
um_tinyc6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
um_tinyc6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
um_tinyc6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
|
|
um_tinyc6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
|
|
um_tinyc6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
um_tinys2.name=UM TinyS2
|
|
um_tinys2.vid.0=0x303a
|
|
um_tinys2.pid.0=0x8001
|
|
um_tinys2.upload_port.0.vid=0x303a
|
|
um_tinys2.upload_port.0.pid=0x8001
|
|
|
|
um_tinys2.bootloader.tool=esptool_py
|
|
um_tinys2.bootloader.tool.default=esptool_py
|
|
|
|
um_tinys2.upload.tool=esptool_py
|
|
um_tinys2.upload.tool.default=esptool_py
|
|
um_tinys2.upload.tool.network=esp_ota
|
|
|
|
um_tinys2.upload.maximum_size=1310720
|
|
um_tinys2.upload.maximum_data_size=327680
|
|
um_tinys2.upload.flags=
|
|
um_tinys2.upload.extra_flags=
|
|
um_tinys2.upload.use_1200bps_touch=true
|
|
um_tinys2.upload.wait_for_upload_port=true
|
|
|
|
um_tinys2.serial.disableDTR=false
|
|
um_tinys2.serial.disableRTS=false
|
|
|
|
um_tinys2.build.tarch=xtensa
|
|
um_tinys2.build.bootloader_addr=0x1000
|
|
um_tinys2.build.target=esp32s2
|
|
um_tinys2.build.mcu=esp32s2
|
|
um_tinys2.build.core=esp32
|
|
um_tinys2.build.variant=um_tinys2
|
|
um_tinys2.build.board=TINYS2
|
|
|
|
um_tinys2.build.cdc_on_boot=1
|
|
um_tinys2.build.msc_on_boot=0
|
|
um_tinys2.build.dfu_on_boot=0
|
|
um_tinys2.build.f_cpu=240000000L
|
|
um_tinys2.build.flash_size=4MB
|
|
um_tinys2.build.flash_freq=80m
|
|
um_tinys2.build.flash_mode=dio
|
|
um_tinys2.build.boot=qio
|
|
um_tinys2.build.partitions=default
|
|
um_tinys2.build.defines=
|
|
|
|
um_tinys2.menu.CDCOnBoot.cdc=Enabled
|
|
um_tinys2.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
um_tinys2.menu.CDCOnBoot.default=Disabled
|
|
um_tinys2.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
um_tinys2.menu.MSCOnBoot.default=Disabled
|
|
um_tinys2.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
um_tinys2.menu.MSCOnBoot.msc=Enabled
|
|
um_tinys2.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
um_tinys2.menu.DFUOnBoot.default=Disabled
|
|
um_tinys2.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
um_tinys2.menu.DFUOnBoot.dfu=Enabled
|
|
um_tinys2.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
um_tinys2.menu.PSRAM.enabled=Enabled
|
|
um_tinys2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
um_tinys2.menu.PSRAM.disabled=Disabled
|
|
um_tinys2.menu.PSRAM.disabled.build.defines=
|
|
|
|
um_tinys2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
um_tinys2.menu.PartitionScheme.default.build.partitions=default
|
|
um_tinys2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
um_tinys2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
um_tinys2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
um_tinys2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
um_tinys2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
um_tinys2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
um_tinys2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
um_tinys2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
um_tinys2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
um_tinys2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
um_tinys2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
um_tinys2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
um_tinys2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
um_tinys2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
um_tinys2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
um_tinys2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
um_tinys2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
um_tinys2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
um_tinys2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
um_tinys2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
um_tinys2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
um_tinys2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
um_tinys2.menu.CPUFreq.240=240MHz (WiFi)
|
|
um_tinys2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
um_tinys2.menu.CPUFreq.160=160MHz (WiFi)
|
|
um_tinys2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
um_tinys2.menu.CPUFreq.80=80MHz (WiFi)
|
|
um_tinys2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
um_tinys2.menu.CPUFreq.40=40MHz
|
|
um_tinys2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
um_tinys2.menu.CPUFreq.20=20MHz
|
|
um_tinys2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
um_tinys2.menu.CPUFreq.10=10MHz
|
|
um_tinys2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
um_tinys2.menu.FlashSize.4M=4MB (32Mb)
|
|
um_tinys2.menu.FlashSize.4M.build.flash_size=4MB
|
|
um_tinys2.menu.FlashSize.2M=2MB (16Mb)
|
|
um_tinys2.menu.FlashSize.2M.build.flash_size=2MB
|
|
um_tinys2.menu.FlashSize.2M.build.partitions=minimal
|
|
|
|
um_tinys2.menu.UploadSpeed.921600=921600
|
|
um_tinys2.menu.UploadSpeed.921600.upload.speed=921600
|
|
um_tinys2.menu.UploadSpeed.115200=115200
|
|
um_tinys2.menu.UploadSpeed.115200.upload.speed=115200
|
|
um_tinys2.menu.UploadSpeed.256000.windows=256000
|
|
um_tinys2.menu.UploadSpeed.256000.upload.speed=256000
|
|
um_tinys2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
um_tinys2.menu.UploadSpeed.230400=230400
|
|
um_tinys2.menu.UploadSpeed.230400.upload.speed=230400
|
|
um_tinys2.menu.UploadSpeed.460800.linux=460800
|
|
um_tinys2.menu.UploadSpeed.460800.macosx=460800
|
|
um_tinys2.menu.UploadSpeed.460800.upload.speed=460800
|
|
|
|
um_tinys2.menu.DebugLevel.none=None
|
|
um_tinys2.menu.DebugLevel.none.build.code_debug=0
|
|
um_tinys2.menu.DebugLevel.error=Error
|
|
um_tinys2.menu.DebugLevel.error.build.code_debug=1
|
|
um_tinys2.menu.DebugLevel.warn=Warn
|
|
um_tinys2.menu.DebugLevel.warn.build.code_debug=2
|
|
um_tinys2.menu.DebugLevel.info=Info
|
|
um_tinys2.menu.DebugLevel.info.build.code_debug=3
|
|
um_tinys2.menu.DebugLevel.debug=Debug
|
|
um_tinys2.menu.DebugLevel.debug.build.code_debug=4
|
|
um_tinys2.menu.DebugLevel.verbose=Verbose
|
|
um_tinys2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
um_tinys2.menu.EraseFlash.none=Disabled
|
|
um_tinys2.menu.EraseFlash.none.upload.erase_cmd=
|
|
um_tinys2.menu.EraseFlash.all=Enabled
|
|
um_tinys2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
um_tinys3.name=UM TinyS3
|
|
um_tinys3.vid.0=0x303a
|
|
um_tinys3.pid.0=0x80D0
|
|
um_tinys3.upload_port.0.vid=0x303a
|
|
um_tinys3.upload_port.0.pid=0x80D0
|
|
|
|
um_tinys3.bootloader.tool=esptool_py
|
|
um_tinys3.bootloader.tool.default=esptool_py
|
|
|
|
um_tinys3.upload.tool=esptool_py
|
|
um_tinys3.upload.tool.default=esptool_py
|
|
um_tinys3.upload.tool.network=esp_ota
|
|
|
|
um_tinys3.upload.maximum_size=1310720
|
|
um_tinys3.upload.maximum_data_size=327680
|
|
um_tinys3.upload.flags=
|
|
um_tinys3.upload.extra_flags=
|
|
um_tinys3.upload.use_1200bps_touch=false
|
|
um_tinys3.upload.wait_for_upload_port=false
|
|
|
|
um_tinys3.serial.disableDTR=false
|
|
um_tinys3.serial.disableRTS=false
|
|
|
|
um_tinys3.build.tarch=xtensa
|
|
um_tinys3.build.bootloader_addr=0x0
|
|
um_tinys3.build.target=esp32s3
|
|
um_tinys3.build.mcu=esp32s3
|
|
um_tinys3.build.core=esp32
|
|
um_tinys3.build.variant=um_tinys3
|
|
um_tinys3.build.board=TINYS3
|
|
|
|
um_tinys3.build.usb_mode=1
|
|
um_tinys3.build.cdc_on_boot=1
|
|
um_tinys3.build.msc_on_boot=0
|
|
um_tinys3.build.dfu_on_boot=0
|
|
um_tinys3.build.f_cpu=240000000L
|
|
um_tinys3.build.flash_size=8MB
|
|
um_tinys3.build.flash_freq=80m
|
|
um_tinys3.build.flash_mode=dio
|
|
um_tinys3.build.boot=qio
|
|
um_tinys3.build.partitions=default
|
|
um_tinys3.build.defines=
|
|
um_tinys3.build.loop_core=
|
|
um_tinys3.build.event_core=
|
|
um_tinys3.build.flash_type=qio
|
|
um_tinys3.build.psram_type=qspi
|
|
um_tinys3.build.memory_type=qio_qspi
|
|
|
|
um_tinys3.menu.LoopCore.1=Core 1
|
|
um_tinys3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
um_tinys3.menu.LoopCore.0=Core 0
|
|
um_tinys3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
um_tinys3.menu.EventsCore.1=Core 1
|
|
um_tinys3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
um_tinys3.menu.EventsCore.0=Core 0
|
|
um_tinys3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
um_tinys3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
um_tinys3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
um_tinys3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
um_tinys3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
um_tinys3.menu.CDCOnBoot.cdc=Enabled
|
|
um_tinys3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
um_tinys3.menu.CDCOnBoot.default=Disabled
|
|
um_tinys3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
um_tinys3.menu.MSCOnBoot.default=Disabled
|
|
um_tinys3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
um_tinys3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
um_tinys3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
um_tinys3.menu.DFUOnBoot.default=Disabled
|
|
um_tinys3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
um_tinys3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
um_tinys3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
um_tinys3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
um_tinys3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
um_tinys3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
um_tinys3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
um_tinys3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
um_tinys3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
um_tinys3.menu.PSRAM.enabled=Enabled
|
|
um_tinys3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
um_tinys3.menu.PSRAM.disabled=Disabled
|
|
um_tinys3.menu.PSRAM.disabled.build.defines=
|
|
|
|
um_tinys3.menu.PartitionScheme.default_8MB=Default (3MB APP/1.5MB SPIFFS)
|
|
um_tinys3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
um_tinys3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
um_tinys3.menu.PartitionScheme.tinyuf2=TinyUF2 Compatibility (2MB APP/3.7MB FFAT)
|
|
um_tinys3.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader_tinyuf2
|
|
um_tinys3.menu.PartitionScheme.tinyuf2.build.custom_partitions=partitions_tinyuf2
|
|
um_tinys3.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
um_tinys3.menu.PartitionScheme.tinyuf2.upload.maximum_size=2097152
|
|
|
|
um_tinys3.menu.CPUFreq.240=240MHz (WiFi)
|
|
um_tinys3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
um_tinys3.menu.CPUFreq.160=160MHz (WiFi)
|
|
um_tinys3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
um_tinys3.menu.CPUFreq.80=80MHz (WiFi)
|
|
um_tinys3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
um_tinys3.menu.CPUFreq.40=40MHz
|
|
um_tinys3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
um_tinys3.menu.CPUFreq.20=20MHz
|
|
um_tinys3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
um_tinys3.menu.CPUFreq.10=10MHz
|
|
um_tinys3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
um_tinys3.menu.FlashMode.qio=QIO
|
|
um_tinys3.menu.FlashMode.qio.build.flash_mode=dio
|
|
um_tinys3.menu.FlashMode.qio.build.boot=qio
|
|
um_tinys3.menu.FlashMode.dio=DIO
|
|
um_tinys3.menu.FlashMode.dio.build.flash_mode=dio
|
|
um_tinys3.menu.FlashMode.dio.build.boot=dio
|
|
|
|
um_tinys3.menu.UploadSpeed.921600=921600
|
|
um_tinys3.menu.UploadSpeed.921600.upload.speed=921600
|
|
um_tinys3.menu.UploadSpeed.115200=115200
|
|
um_tinys3.menu.UploadSpeed.115200.upload.speed=115200
|
|
um_tinys3.menu.UploadSpeed.256000.windows=256000
|
|
um_tinys3.menu.UploadSpeed.256000.upload.speed=256000
|
|
um_tinys3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
um_tinys3.menu.UploadSpeed.230400=230400
|
|
um_tinys3.menu.UploadSpeed.230400.upload.speed=230400
|
|
um_tinys3.menu.UploadSpeed.460800.linux=460800
|
|
um_tinys3.menu.UploadSpeed.460800.macosx=460800
|
|
um_tinys3.menu.UploadSpeed.460800.upload.speed=460800
|
|
um_tinys3.menu.UploadSpeed.512000.windows=512000
|
|
um_tinys3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
um_tinys3.menu.DebugLevel.none=None
|
|
um_tinys3.menu.DebugLevel.none.build.code_debug=0
|
|
um_tinys3.menu.DebugLevel.error=Error
|
|
um_tinys3.menu.DebugLevel.error.build.code_debug=1
|
|
um_tinys3.menu.DebugLevel.warn=Warn
|
|
um_tinys3.menu.DebugLevel.warn.build.code_debug=2
|
|
um_tinys3.menu.DebugLevel.info=Info
|
|
um_tinys3.menu.DebugLevel.info.build.code_debug=3
|
|
um_tinys3.menu.DebugLevel.debug=Debug
|
|
um_tinys3.menu.DebugLevel.debug.build.code_debug=4
|
|
um_tinys3.menu.DebugLevel.verbose=Verbose
|
|
um_tinys3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
um_tinys3.menu.EraseFlash.none=Disabled
|
|
um_tinys3.menu.EraseFlash.none.upload.erase_cmd=
|
|
um_tinys3.menu.EraseFlash.all=Enabled
|
|
um_tinys3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
S_ODI_Ultra.name=S.ODI Ultra v1
|
|
|
|
S_ODI_Ultra.bootloader.tool=esptool_py
|
|
S_ODI_Ultra.bootloader.tool.default=esptool_py
|
|
|
|
S_ODI_Ultra.upload.tool=esptool_py
|
|
S_ODI_Ultra.upload.tool.default=esptool_py
|
|
S_ODI_Ultra.upload.tool.network=esp_ota
|
|
|
|
S_ODI_Ultra.upload.maximum_size=1310720
|
|
S_ODI_Ultra.upload.maximum_data_size=327680
|
|
S_ODI_Ultra.upload.wait_for_upload_port=true
|
|
S_ODI_Ultra.upload.flags=
|
|
S_ODI_Ultra.upload.extra_flags=
|
|
|
|
S_ODI_Ultra.serial.disableDTR=true
|
|
S_ODI_Ultra.serial.disableRTS=true
|
|
|
|
S_ODI_Ultra.build.tarch=xtensa
|
|
S_ODI_Ultra.build.bootloader_addr=0x1000
|
|
S_ODI_Ultra.build.target=esp32
|
|
S_ODI_Ultra.build.mcu=esp32
|
|
S_ODI_Ultra.build.core=esp32
|
|
S_ODI_Ultra.build.variant=S_ODI_Ultra_v1
|
|
S_ODI_Ultra.build.board=ESP32_DEV
|
|
|
|
S_ODI_Ultra.build.f_cpu=240000000L
|
|
S_ODI_Ultra.build.flash_mode=dio
|
|
S_ODI_Ultra.build.flash_size=4MB
|
|
S_ODI_Ultra.build.boot=dio
|
|
S_ODI_Ultra.build.partitions=default
|
|
S_ODI_Ultra.build.defines=
|
|
|
|
S_ODI_Ultra.menu.FlashFreq.80=80MHz
|
|
S_ODI_Ultra.menu.FlashFreq.80.build.flash_freq=80m
|
|
S_ODI_Ultra.menu.FlashFreq.40=40MHz
|
|
S_ODI_Ultra.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
S_ODI_Ultra.menu.UploadSpeed.921600=921600
|
|
S_ODI_Ultra.menu.UploadSpeed.921600.upload.speed=921600
|
|
S_ODI_Ultra.menu.UploadSpeed.115200=115200
|
|
S_ODI_Ultra.menu.UploadSpeed.115200.upload.speed=115200
|
|
S_ODI_Ultra.menu.UploadSpeed.256000.windows=256000
|
|
S_ODI_Ultra.menu.UploadSpeed.256000.upload.speed=256000
|
|
S_ODI_Ultra.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
S_ODI_Ultra.menu.UploadSpeed.230400=230400
|
|
S_ODI_Ultra.menu.UploadSpeed.230400.upload.speed=230400
|
|
S_ODI_Ultra.menu.UploadSpeed.460800.linux=460800
|
|
S_ODI_Ultra.menu.UploadSpeed.460800.macosx=460800
|
|
S_ODI_Ultra.menu.UploadSpeed.460800.upload.speed=460800
|
|
S_ODI_Ultra.menu.UploadSpeed.512000.windows=512000
|
|
S_ODI_Ultra.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
S_ODI_Ultra.menu.DebugLevel.none=None
|
|
S_ODI_Ultra.menu.DebugLevel.none.build.code_debug=0
|
|
S_ODI_Ultra.menu.DebugLevel.error=Error
|
|
S_ODI_Ultra.menu.DebugLevel.error.build.code_debug=1
|
|
S_ODI_Ultra.menu.DebugLevel.warn=Warn
|
|
S_ODI_Ultra.menu.DebugLevel.warn.build.code_debug=2
|
|
S_ODI_Ultra.menu.DebugLevel.info=Info
|
|
S_ODI_Ultra.menu.DebugLevel.info.build.code_debug=3
|
|
S_ODI_Ultra.menu.DebugLevel.debug=Debug
|
|
S_ODI_Ultra.menu.DebugLevel.debug.build.code_debug=4
|
|
|
|
S_ODI_Ultra.menu.EraseFlash.none=Disabled
|
|
S_ODI_Ultra.menu.EraseFlash.none.upload.erase_cmd=
|
|
S_ODI_Ultra.menu.EraseFlash.all=Enabled
|
|
S_ODI_Ultra.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
lilygo_t_display.name=LilyGo T-Display
|
|
|
|
lilygo_t_display.upload.tool=esptool_py
|
|
lilygo_t_display.upload.tool.default=esptool_py
|
|
lilygo_t_display.upload.tool.network=esp_ota
|
|
lilygo_t_display.upload.maximum_size=1310720
|
|
lilygo_t_display.upload.maximum_data_size=327680
|
|
lilygo_t_display.upload.wait_for_upload_port=true
|
|
lilygo_t_display.upload.speed=460800
|
|
lilygo_t_display.upload.flags=
|
|
lilygo_t_display.upload.extra_flags=
|
|
|
|
lilygo_t_display.bootloader.tool=esptool_py
|
|
lilygo_t_display.bootloader.tool.default=esptool_py
|
|
|
|
lilygo_t_display.serial.disableDTR=true
|
|
lilygo_t_display.serial.disableRTS=true
|
|
|
|
lilygo_t_display.build.tarch=xtensa
|
|
lilygo_t_display.build.bootloader_addr=0x1000
|
|
lilygo_t_display.build.mcu=esp32
|
|
lilygo_t_display.build.core=esp32
|
|
lilygo_t_display.build.target=esp32
|
|
lilygo_t_display.build.variant=lilygo_t_display
|
|
lilygo_t_display.build.board=LILYGO_T_DISPLAY
|
|
|
|
lilygo_t_display.build.f_cpu=240000000L
|
|
lilygo_t_display.build.flash_size=4MB
|
|
lilygo_t_display.build.flash_freq=80m
|
|
lilygo_t_display.build.flash_mode=dio
|
|
lilygo_t_display.build.boot=dio
|
|
lilygo_t_display.build.partitions=default
|
|
|
|
lilygo_t_display.menu.PSRAM.disabled=Disabled
|
|
lilygo_t_display.menu.PSRAM.disabled.build.defines=
|
|
lilygo_t_display.menu.PSRAM.enabled=Enabled
|
|
lilygo_t_display.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
lilygo_t_display.menu.PSRAM.enabled.build.extra_libs=
|
|
|
|
lilygo_t_display.menu.LoopCore.1=Core 1
|
|
lilygo_t_display.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
lilygo_t_display.menu.LoopCore.0=Core 0
|
|
lilygo_t_display.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
lilygo_t_display.menu.EventsCore.1=Core 1
|
|
lilygo_t_display.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
lilygo_t_display.menu.EventsCore.0=Core 0
|
|
lilygo_t_display.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
lilygo_t_display.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
lilygo_t_display.menu.PartitionScheme.default.build.partitions=default
|
|
lilygo_t_display.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
lilygo_t_display.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
lilygo_t_display.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
lilygo_t_display.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
lilygo_t_display.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
lilygo_t_display.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
lilygo_t_display.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
lilygo_t_display.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
lilygo_t_display.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
lilygo_t_display.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
lilygo_t_display.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
lilygo_t_display.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
lilygo_t_display.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
lilygo_t_display.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
lilygo_t_display.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
lilygo_t_display.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
lilygo_t_display.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
lilygo_t_display.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
lilygo_t_display.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
lilygo_t_display.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
lilygo_t_display.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
lilygo_t_display.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
lilygo_t_display.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
|
|
lilygo_t_display.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
lilygo_t_display.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
lilygo_t_display.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9MB FATFS)
|
|
lilygo_t_display.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
lilygo_t_display.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
|
|
lilygo_t_display.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
lilygo_t_display.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
lilygo_t_display.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
lilygo_t_display.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
lilygo_t_display.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
lilygo_t_display.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
lilygo_t_display.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
lilygo_t_display.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
lilygo_t_display.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
lilygo_t_display.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
lilygo_t_display.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
lilygo_t_display.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
lilygo_t_display.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
lilygo_t_display.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
lilygo_t_display.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
lilygo_t_display.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
lilygo_t_display.menu.FlashMode.qio=QIO
|
|
lilygo_t_display.menu.FlashMode.qio.build.flash_mode=dio
|
|
lilygo_t_display.menu.FlashMode.qio.build.boot=qio
|
|
lilygo_t_display.menu.FlashMode.dio=DIO
|
|
lilygo_t_display.menu.FlashMode.dio.build.flash_mode=dio
|
|
lilygo_t_display.menu.FlashMode.dio.build.boot=dio
|
|
|
|
lilygo_t_display.menu.FlashFreq.80=80MHz
|
|
lilygo_t_display.menu.FlashFreq.80.build.flash_freq=80m
|
|
lilygo_t_display.menu.FlashFreq.40=40MHz
|
|
lilygo_t_display.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
lilygo_t_display.menu.FlashSize.4M=4MB (32Mb)
|
|
lilygo_t_display.menu.FlashSize.4M.build.flash_size=4MB
|
|
lilygo_t_display.menu.FlashSize.16M=16MB (128Mb)
|
|
lilygo_t_display.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
lilygo_t_display.menu.UploadSpeed.921600=921600
|
|
lilygo_t_display.menu.UploadSpeed.921600.upload.speed=921600
|
|
lilygo_t_display.menu.UploadSpeed.115200=115200
|
|
lilygo_t_display.menu.UploadSpeed.115200.upload.speed=115200
|
|
lilygo_t_display.menu.UploadSpeed.256000.windows=256000
|
|
lilygo_t_display.menu.UploadSpeed.256000.upload.speed=256000
|
|
lilygo_t_display.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
lilygo_t_display.menu.UploadSpeed.230400=230400
|
|
lilygo_t_display.menu.UploadSpeed.230400.upload.speed=230400
|
|
lilygo_t_display.menu.UploadSpeed.460800.linux=460800
|
|
lilygo_t_display.menu.UploadSpeed.460800.macosx=460800
|
|
lilygo_t_display.menu.UploadSpeed.460800.upload.speed=460800
|
|
lilygo_t_display.menu.UploadSpeed.512000.windows=512000
|
|
lilygo_t_display.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
lilygo_t_display.menu.DebugLevel.none=None
|
|
lilygo_t_display.menu.DebugLevel.none.build.code_debug=0
|
|
lilygo_t_display.menu.DebugLevel.error=Error
|
|
lilygo_t_display.menu.DebugLevel.error.build.code_debug=1
|
|
lilygo_t_display.menu.DebugLevel.warn=Warn
|
|
lilygo_t_display.menu.DebugLevel.warn.build.code_debug=2
|
|
lilygo_t_display.menu.DebugLevel.info=Info
|
|
lilygo_t_display.menu.DebugLevel.info.build.code_debug=3
|
|
lilygo_t_display.menu.DebugLevel.debug=Debug
|
|
lilygo_t_display.menu.DebugLevel.debug.build.code_debug=4
|
|
lilygo_t_display.menu.DebugLevel.verbose=Verbose
|
|
lilygo_t_display.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lilygo_t_display.menu.EraseFlash.none=Disabled
|
|
lilygo_t_display.menu.EraseFlash.none.upload.erase_cmd=
|
|
lilygo_t_display.menu.EraseFlash.all=Enabled
|
|
lilygo_t_display.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
lilygo_t_display_s3.name=LilyGo T-Display-S3
|
|
|
|
lilygo_t_display_s3.bootloader.tool=esptool_py
|
|
lilygo_t_display_s3.bootloader.tool.default=esptool_py
|
|
|
|
lilygo_t_display_s3.upload.tool=esptool_py
|
|
lilygo_t_display_s3.upload.tool.default=esptool_py
|
|
lilygo_t_display_s3.upload.tool.network=esp_ota
|
|
|
|
lilygo_t_display_s3.upload.maximum_size=3145728
|
|
lilygo_t_display_s3.upload.maximum_data_size=327680
|
|
lilygo_t_display_s3.upload.speed=921600
|
|
lilygo_t_display_s3.upload.flags=
|
|
lilygo_t_display_s3.upload.extra_flags=
|
|
lilygo_t_display_s3.upload.use_1200bps_touch=false
|
|
lilygo_t_display_s3.upload.wait_for_upload_port=false
|
|
|
|
lilygo_t_display_s3.serial.disableDTR=false
|
|
lilygo_t_display_s3.serial.disableRTS=false
|
|
|
|
lilygo_t_display_s3.build.tarch=xtensa
|
|
lilygo_t_display_s3.build.bootloader_addr=0x0
|
|
lilygo_t_display_s3.build.target=esp32s3
|
|
lilygo_t_display_s3.build.mcu=esp32s3
|
|
lilygo_t_display_s3.build.core=esp32
|
|
lilygo_t_display_s3.build.variant=lilygo_t_display_s3
|
|
lilygo_t_display_s3.build.board=LILYGO_T_DISPLAY_S3
|
|
|
|
lilygo_t_display_s3.build.usb_mode=1
|
|
lilygo_t_display_s3.build.cdc_on_boot=1
|
|
lilygo_t_display_s3.build.msc_on_boot=0
|
|
lilygo_t_display_s3.build.dfu_on_boot=0
|
|
lilygo_t_display_s3.build.f_cpu=240000000L
|
|
lilygo_t_display_s3.build.flash_size=16MB
|
|
lilygo_t_display_s3.build.flash_freq=80m
|
|
lilygo_t_display_s3.build.flash_mode=dio
|
|
lilygo_t_display_s3.build.boot=qio
|
|
lilygo_t_display_s3.build.boot_freq=80m
|
|
lilygo_t_display_s3.build.partitions=app3M_fat9M_16MB
|
|
lilygo_t_display_s3.build.defines=
|
|
lilygo_t_display_s3.build.loop_core=
|
|
lilygo_t_display_s3.build.event_core=
|
|
lilygo_t_display_s3.build.psram_type=opi
|
|
lilygo_t_display_s3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
lilygo_t_display_s3.menu.JTAGAdapter.default=Disabled
|
|
lilygo_t_display_s3.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
lilygo_t_display_s3.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
lilygo_t_display_s3.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
lilygo_t_display_s3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
|
|
lilygo_t_display_s3.menu.LoopCore.1=Core 1
|
|
lilygo_t_display_s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
lilygo_t_display_s3.menu.LoopCore.0=Core 0
|
|
lilygo_t_display_s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
lilygo_t_display_s3.menu.EventsCore.1=Core 1
|
|
lilygo_t_display_s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
lilygo_t_display_s3.menu.EventsCore.0=Core 0
|
|
lilygo_t_display_s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
lilygo_t_display_s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
lilygo_t_display_s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
lilygo_t_display_s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
lilygo_t_display_s3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
lilygo_t_display_s3.menu.CDCOnBoot.cdc=Enabled
|
|
lilygo_t_display_s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
lilygo_t_display_s3.menu.CDCOnBoot.default=Disabled
|
|
lilygo_t_display_s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
lilygo_t_display_s3.menu.MSCOnBoot.default=Disabled
|
|
lilygo_t_display_s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
lilygo_t_display_s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
lilygo_t_display_s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
lilygo_t_display_s3.menu.DFUOnBoot.default=Disabled
|
|
lilygo_t_display_s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
lilygo_t_display_s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
lilygo_t_display_s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
lilygo_t_display_s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
lilygo_t_display_s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
lilygo_t_display_s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
lilygo_t_display_s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
lilygo_t_display_s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
lilygo_t_display_s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
lilygo_t_display_s3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
lilygo_t_display_s3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
lilygo_t_display_s3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
lilygo_t_display_s3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
lilygo_t_display_s3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
lilygo_t_display_s3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
lilygo_t_display_s3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
lilygo_t_display_s3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
lilygo_t_display_s3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
lilygo_t_display_s3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
lilygo_t_display_s3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
lilygo_t_display_s3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
lilygo_t_display_s3.menu.DebugLevel.none=None
|
|
lilygo_t_display_s3.menu.DebugLevel.none.build.code_debug=0
|
|
lilygo_t_display_s3.menu.DebugLevel.error=Error
|
|
lilygo_t_display_s3.menu.DebugLevel.error.build.code_debug=1
|
|
lilygo_t_display_s3.menu.DebugLevel.warn=Warn
|
|
lilygo_t_display_s3.menu.DebugLevel.warn.build.code_debug=2
|
|
lilygo_t_display_s3.menu.DebugLevel.info=Info
|
|
lilygo_t_display_s3.menu.DebugLevel.info.build.code_debug=3
|
|
lilygo_t_display_s3.menu.DebugLevel.debug=Debug
|
|
lilygo_t_display_s3.menu.DebugLevel.debug.build.code_debug=4
|
|
lilygo_t_display_s3.menu.DebugLevel.verbose=Verbose
|
|
lilygo_t_display_s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lilygo_t_display_s3.menu.EraseFlash.none=Disabled
|
|
lilygo_t_display_s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
lilygo_t_display_s3.menu.EraseFlash.all=Enabled
|
|
lilygo_t_display_s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
lilygo_t_eth_lite.name=LilyGo T-ETH-Lite
|
|
|
|
lilygo_t_eth_lite.bootloader.tool=esptool_py
|
|
lilygo_t_eth_lite.bootloader.tool.default=esptool_py
|
|
|
|
lilygo_t_eth_lite.upload.tool=esptool_py
|
|
lilygo_t_eth_lite.upload.tool.default=esptool_py
|
|
lilygo_t_eth_lite.upload.tool.network=esp_ota
|
|
|
|
lilygo_t_eth_lite.upload.maximum_size=3145728
|
|
lilygo_t_eth_lite.upload.maximum_data_size=327680
|
|
lilygo_t_eth_lite.upload.speed=921600
|
|
lilygo_t_eth_lite.upload.flags=
|
|
lilygo_t_eth_lite.upload.extra_flags=
|
|
lilygo_t_eth_lite.upload.use_1200bps_touch=false
|
|
lilygo_t_eth_lite.upload.wait_for_upload_port=false
|
|
|
|
lilygo_t_eth_lite.serial.disableDTR=false
|
|
lilygo_t_eth_lite.serial.disableRTS=false
|
|
|
|
lilygo_t_eth_lite.build.tarch=xtensa
|
|
lilygo_t_eth_lite.build.bootloader_addr=0x0
|
|
lilygo_t_eth_lite.build.target=esp32s3
|
|
lilygo_t_eth_lite.build.mcu=esp32s3
|
|
lilygo_t_eth_lite.build.core=esp32
|
|
lilygo_t_eth_lite.build.variant=lilygo_t_eth_lite
|
|
lilygo_t_eth_lite.build.board=LILYGO_T_ETH_LITE
|
|
|
|
lilygo_t_eth_lite.build.usb_mode=1
|
|
lilygo_t_eth_lite.build.cdc_on_boot=0
|
|
lilygo_t_eth_lite.build.msc_on_boot=0
|
|
lilygo_t_eth_lite.build.dfu_on_boot=0
|
|
lilygo_t_eth_lite.build.f_cpu=240000000L
|
|
lilygo_t_eth_lite.build.flash_size=16MB
|
|
lilygo_t_eth_lite.build.flash_freq=80m
|
|
lilygo_t_eth_lite.build.flash_mode=dio
|
|
lilygo_t_eth_lite.build.boot=qio
|
|
lilygo_t_eth_lite.build.boot_freq=80m
|
|
lilygo_t_eth_lite.build.partitions=app3M_fat9M_16MB
|
|
lilygo_t_eth_lite.build.defines=
|
|
lilygo_t_eth_lite.build.loop_core=
|
|
lilygo_t_eth_lite.build.event_core=
|
|
lilygo_t_eth_lite.build.psram_type=opi
|
|
lilygo_t_eth_lite.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
lilygo_t_eth_lite.menu.JTAGAdapter.default=Disabled
|
|
lilygo_t_eth_lite.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
lilygo_t_eth_lite.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
lilygo_t_eth_lite.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
lilygo_t_eth_lite.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
|
|
lilygo_t_eth_lite.menu.LoopCore.1=Core 1
|
|
lilygo_t_eth_lite.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
lilygo_t_eth_lite.menu.LoopCore.0=Core 0
|
|
lilygo_t_eth_lite.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
lilygo_t_eth_lite.menu.EventsCore.1=Core 1
|
|
lilygo_t_eth_lite.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
lilygo_t_eth_lite.menu.EventsCore.0=Core 0
|
|
lilygo_t_eth_lite.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
lilygo_t_eth_lite.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
lilygo_t_eth_lite.menu.USBMode.hwcdc.build.usb_mode=1
|
|
lilygo_t_eth_lite.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
lilygo_t_eth_lite.menu.USBMode.default.build.usb_mode=0
|
|
|
|
lilygo_t_eth_lite.menu.CDCOnBoot.default=Disabled
|
|
lilygo_t_eth_lite.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
lilygo_t_eth_lite.menu.CDCOnBoot.cdc=Enabled
|
|
lilygo_t_eth_lite.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
lilygo_t_eth_lite.menu.MSCOnBoot.default=Disabled
|
|
lilygo_t_eth_lite.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
lilygo_t_eth_lite.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
lilygo_t_eth_lite.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
lilygo_t_eth_lite.menu.DFUOnBoot.default=Disabled
|
|
lilygo_t_eth_lite.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
lilygo_t_eth_lite.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
lilygo_t_eth_lite.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
lilygo_t_eth_lite.menu.UploadMode.default=UART0 / Hardware CDC
|
|
lilygo_t_eth_lite.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
lilygo_t_eth_lite.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
lilygo_t_eth_lite.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
lilygo_t_eth_lite.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
lilygo_t_eth_lite.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
lilygo_t_eth_lite.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
lilygo_t_eth_lite.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
lilygo_t_eth_lite.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
lilygo_t_eth_lite.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
lilygo_t_eth_lite.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
lilygo_t_eth_lite.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
lilygo_t_eth_lite.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
lilygo_t_eth_lite.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
lilygo_t_eth_lite.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
lilygo_t_eth_lite.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
lilygo_t_eth_lite.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
lilygo_t_eth_lite.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
lilygo_t_eth_lite.menu.DebugLevel.none=None
|
|
lilygo_t_eth_lite.menu.DebugLevel.none.build.code_debug=0
|
|
lilygo_t_eth_lite.menu.DebugLevel.error=Error
|
|
lilygo_t_eth_lite.menu.DebugLevel.error.build.code_debug=1
|
|
lilygo_t_eth_lite.menu.DebugLevel.warn=Warn
|
|
lilygo_t_eth_lite.menu.DebugLevel.warn.build.code_debug=2
|
|
lilygo_t_eth_lite.menu.DebugLevel.info=Info
|
|
lilygo_t_eth_lite.menu.DebugLevel.info.build.code_debug=3
|
|
lilygo_t_eth_lite.menu.DebugLevel.debug=Debug
|
|
lilygo_t_eth_lite.menu.DebugLevel.debug.build.code_debug=4
|
|
lilygo_t_eth_lite.menu.DebugLevel.verbose=Verbose
|
|
lilygo_t_eth_lite.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lilygo_t_eth_lite.menu.EraseFlash.none=Disabled
|
|
lilygo_t_eth_lite.menu.EraseFlash.none.upload.erase_cmd=
|
|
lilygo_t_eth_lite.menu.EraseFlash.all=Enabled
|
|
lilygo_t_eth_lite.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
|
|
##############################################################
|
|
|
|
lilygo_t3s3.name=LilyGo T3-S3
|
|
|
|
lilygo_t3s3.upload.tool=esptool_py
|
|
lilygo_t3s3.upload.tool.default=esptool_py
|
|
lilygo_t3s3.upload.tool.network=esp_ota
|
|
lilygo_t3s3.upload.maximum_size=1310720
|
|
lilygo_t3s3.upload.maximum_data_size=327680
|
|
lilygo_t3s3.upload.wait_for_upload_port=false
|
|
lilygo_t3s3.upload.speed=460800
|
|
lilygo_t3s3.upload.flags=
|
|
lilygo_t3s3.upload.extra_flags=
|
|
|
|
lilygo_t3s3.bootloader.tool=esptool_py
|
|
lilygo_t3s3.bootloader.tool.default=esptool_py
|
|
|
|
lilygo_t3s3.serial.disableDTR=true
|
|
lilygo_t3s3.serial.disableRTS=true
|
|
|
|
lilygo_t3s3.build.tarch=xtensa
|
|
lilygo_t3s3.build.bootloader_addr=0x0
|
|
lilygo_t3s3.build.mcu=esp32s3
|
|
lilygo_t3s3.build.core=esp32
|
|
lilygo_t3s3.build.target=esp32s3
|
|
lilygo_t3s3.build.board=LILYGO_T3_S3
|
|
|
|
lilygo_t3s3.build.usb_mode=1
|
|
lilygo_t3s3.build.cdc_on_boot=1
|
|
lilygo_t3s3.build.msc_on_boot=0
|
|
lilygo_t3s3.build.dfu_on_boot=0
|
|
|
|
lilygo_t3s3.build.f_cpu=240000000L
|
|
lilygo_t3s3.build.flash_size=4MB
|
|
lilygo_t3s3.build.flash_freq=80m
|
|
lilygo_t3s3.build.flash_mode=dio
|
|
lilygo_t3s3.build.boot=dio
|
|
lilygo_t3s3.build.partitions=default
|
|
lilygo_t3s3.build.defines=
|
|
|
|
lilygo_t3s3.menu.PSRAM.disabled=Disabled
|
|
lilygo_t3s3.menu.PSRAM.disabled.build.defines=
|
|
lilygo_t3s3.menu.PSRAM.enabled=Enabled
|
|
lilygo_t3s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
lilygo_t3s3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
|
|
lilygo_t3s3.menu.LoopCore.1=Core 1
|
|
lilygo_t3s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
lilygo_t3s3.menu.LoopCore.0=Core 0
|
|
lilygo_t3s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
lilygo_t3s3.menu.EventsCore.1=Core 1
|
|
lilygo_t3s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
lilygo_t3s3.menu.EventsCore.0=Core 0
|
|
lilygo_t3s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
lilygo_t3s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
lilygo_t3s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
lilygo_t3s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
lilygo_t3s3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
lilygo_t3s3.menu.CDCOnBoot.default=Disabled
|
|
lilygo_t3s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
lilygo_t3s3.menu.CDCOnBoot.cdc=Enabled
|
|
lilygo_t3s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
lilygo_t3s3.menu.MSCOnBoot.default=Disabled
|
|
lilygo_t3s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
lilygo_t3s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
lilygo_t3s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
lilygo_t3s3.menu.DFUOnBoot.default=Disabled
|
|
lilygo_t3s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
lilygo_t3s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
lilygo_t3s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
lilygo_t3s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
lilygo_t3s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
lilygo_t3s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
lilygo_t3s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
lilygo_t3s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
lilygo_t3s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
lilygo_t3s3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
lilygo_t3s3.menu.PartitionScheme.default.build.partitions=default
|
|
lilygo_t3s3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
lilygo_t3s3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
lilygo_t3s3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
lilygo_t3s3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
lilygo_t3s3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
lilygo_t3s3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
lilygo_t3s3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
lilygo_t3s3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
lilygo_t3s3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
lilygo_t3s3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
lilygo_t3s3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
lilygo_t3s3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
lilygo_t3s3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
lilygo_t3s3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
lilygo_t3s3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
lilygo_t3s3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
lilygo_t3s3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
lilygo_t3s3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
lilygo_t3s3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
lilygo_t3s3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
lilygo_t3s3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
lilygo_t3s3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
lilygo_t3s3.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
lilygo_t3s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
lilygo_t3s3.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
lilygo_t3s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
lilygo_t3s3.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
lilygo_t3s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
|
|
lilygo_t3s3.menu.FlashMode.qio=QIO
|
|
lilygo_t3s3.menu.FlashMode.qio.build.flash_mode=dio
|
|
lilygo_t3s3.menu.FlashMode.qio.build.boot=qio
|
|
lilygo_t3s3.menu.FlashMode.dio=DIO
|
|
lilygo_t3s3.menu.FlashMode.dio.build.flash_mode=dio
|
|
lilygo_t3s3.menu.FlashMode.dio.build.boot=dio
|
|
|
|
lilygo_t3s3.menu.FlashFreq.80=80MHz
|
|
lilygo_t3s3.menu.FlashFreq.80.build.flash_freq=80m
|
|
lilygo_t3s3.menu.FlashFreq.40=40MHz
|
|
lilygo_t3s3.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
lilygo_t3s3.menu.UploadSpeed.921600=921600
|
|
lilygo_t3s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
lilygo_t3s3.menu.UploadSpeed.115200=115200
|
|
lilygo_t3s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
lilygo_t3s3.menu.UploadSpeed.256000.windows=256000
|
|
lilygo_t3s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
lilygo_t3s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
lilygo_t3s3.menu.UploadSpeed.230400=230400
|
|
lilygo_t3s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
lilygo_t3s3.menu.UploadSpeed.460800.linux=460800
|
|
lilygo_t3s3.menu.UploadSpeed.460800.macosx=460800
|
|
lilygo_t3s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
lilygo_t3s3.menu.UploadSpeed.512000.windows=512000
|
|
lilygo_t3s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
lilygo_t3s3.menu.DebugLevel.none=None
|
|
lilygo_t3s3.menu.DebugLevel.none.build.code_debug=0
|
|
lilygo_t3s3.menu.DebugLevel.error=Error
|
|
lilygo_t3s3.menu.DebugLevel.error.build.code_debug=1
|
|
lilygo_t3s3.menu.DebugLevel.warn=Warn
|
|
lilygo_t3s3.menu.DebugLevel.warn.build.code_debug=2
|
|
lilygo_t3s3.menu.DebugLevel.info=Info
|
|
lilygo_t3s3.menu.DebugLevel.info.build.code_debug=3
|
|
lilygo_t3s3.menu.DebugLevel.debug=Debug
|
|
lilygo_t3s3.menu.DebugLevel.debug.build.code_debug=4
|
|
lilygo_t3s3.menu.DebugLevel.verbose=Verbose
|
|
lilygo_t3s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lilygo_t3s3.menu.EraseFlash.none=Disabled
|
|
lilygo_t3s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
lilygo_t3s3.menu.EraseFlash.all=Enabled
|
|
lilygo_t3s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
lilygo_t3s3.menu.Revision.Radio_SX1262=Radio-SX1262
|
|
lilygo_t3s3.menu.Revision.Radio_SX1262.build.board=LILYGO_T3S3_SX1262
|
|
lilygo_t3s3.menu.Revision.Radio_SX1262.build.variant=lilygo_t3_s3_sx1262
|
|
|
|
lilygo_t3s3.menu.Revision.Radio_SX1276=Radio-SX1276
|
|
lilygo_t3s3.menu.Revision.Radio_SX1276.build.board=LILYGO_T3S3_SX1276
|
|
lilygo_t3s3.menu.Revision.Radio_SX1276.build.variant=lilygo_t3_s3_sx127x
|
|
|
|
lilygo_t3s3.menu.Revision.Radio_SX1278=Radio-SX1278
|
|
lilygo_t3s3.menu.Revision.Radio_SX1278.build.board=LILYGO_T3S3_SX1278
|
|
lilygo_t3s3.menu.Revision.Radio_SX1278.build.variant=lilygo_t3_s3_sx127x
|
|
|
|
lilygo_t3s3.menu.Revision.Radio_SX1280=Radio-SX1280
|
|
lilygo_t3s3.menu.Revision.Radio_SX1280.build.board=LILYGO_T3S3_SX1280
|
|
lilygo_t3s3.menu.Revision.Radio_SX1280.build.variant=lilygo_t3_s3_sx1280
|
|
|
|
lilygo_t3s3.menu.Revision.Radio_SX1280PA=Radio-SX1280PA
|
|
lilygo_t3s3.menu.Revision.Radio_SX1280PA.build.board=LILYGO_T3S3_SX1280PA
|
|
lilygo_t3s3.menu.Revision.Radio_SX1280PA.build.variant=lilygo_t3_s3_sx1280pa
|
|
|
|
lilygo_t3s3.menu.Revision.Radio_LR1121=Radio-LR1121
|
|
lilygo_t3s3.menu.Revision.Radio_LR1121.build.board=LILYGO_T3S3_LR1121
|
|
lilygo_t3s3.menu.Revision.Radio_LR1121.build.variant=lilygo_t3_s3_lr1121
|
|
|
|
##############################################################
|
|
|
|
twatchs3.name=LilyGo T-Watch-S3
|
|
|
|
twatchs3.bootloader.tool=esptool_py
|
|
twatchs3.bootloader.tool.default=esptool_py
|
|
|
|
twatchs3.upload.tool=esptool_py
|
|
twatchs3.upload.tool.default=esptool_py
|
|
twatchs3.upload.tool.network=esp_ota
|
|
|
|
twatchs3.upload.maximum_size=1310720
|
|
twatchs3.upload.maximum_data_size=327680
|
|
twatchs3.upload.flags=
|
|
twatchs3.upload.extra_flags=
|
|
twatchs3.upload.use_1200bps_touch=false
|
|
twatchs3.upload.wait_for_upload_port=false
|
|
|
|
twatchs3.serial.disableDTR=false
|
|
twatchs3.serial.disableRTS=false
|
|
|
|
twatchs3.build.tarch=xtensa
|
|
twatchs3.build.bootloader_addr=0x0
|
|
twatchs3.build.target=esp32s3
|
|
twatchs3.build.mcu=esp32s3
|
|
twatchs3.build.core=esp32
|
|
twatchs3.build.variant=lilygo_twatch_s3
|
|
twatchs3.build.board=T_WATCH_S3
|
|
|
|
twatchs3.build.usb_mode=1
|
|
twatchs3.build.cdc_on_boot=0
|
|
twatchs3.build.msc_on_boot=0
|
|
twatchs3.build.dfu_on_boot=0
|
|
twatchs3.build.f_cpu=240000000L
|
|
twatchs3.build.flash_size=16MB
|
|
twatchs3.build.flash_freq=80m
|
|
twatchs3.build.flash_mode=dio
|
|
twatchs3.build.boot=qio
|
|
twatchs3.build.boot_freq=80m
|
|
twatchs3.build.partitions=app3M_fat9M_16MB
|
|
twatchs3.build.defines=-DBOARD_HAS_PSRAM -DARDUINO_T_WATCH_S3
|
|
twatchs3.build.loop_core=
|
|
twatchs3.build.event_core=
|
|
twatchs3.build.psram_type=opi
|
|
twatchs3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
twatchs3.menu.JTAGAdapter.default=Disabled
|
|
twatchs3.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
twatchs3.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
twatchs3.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
twatchs3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
|
|
twatchs3.menu.LoopCore.1=Core 1
|
|
twatchs3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
twatchs3.menu.LoopCore.0=Core 0
|
|
twatchs3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
twatchs3.menu.EventsCore.1=Core 1
|
|
twatchs3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
twatchs3.menu.EventsCore.0=Core 0
|
|
twatchs3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
twatchs3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
twatchs3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
twatchs3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
twatchs3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
twatchs3.menu.CDCOnBoot.default=Enabled
|
|
twatchs3.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
twatchs3.menu.CDCOnBoot.cdc=Disabled
|
|
twatchs3.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
|
|
|
|
twatchs3.menu.MSCOnBoot.default=Disabled
|
|
twatchs3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
twatchs3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
twatchs3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
twatchs3.menu.DFUOnBoot.default=Disabled
|
|
twatchs3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
twatchs3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
twatchs3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
twatchs3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
twatchs3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
twatchs3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
twatchs3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
twatchs3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
twatchs3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
twatchs3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
twatchs3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
twatchs3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
twatchs3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
twatchs3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
twatchs3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
twatchs3.menu.PartitionScheme.rainmaker=RainMaker
|
|
twatchs3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
twatchs3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
twatchs3.menu.PartitionScheme.esp_sr_16=ESP SR 16M (3MB APP/7MB SPIFFS/2.9MB MODEL)
|
|
twatchs3.menu.PartitionScheme.esp_sr_16.upload.maximum_size=3145728
|
|
twatchs3.menu.PartitionScheme.esp_sr_16.upload.extra_flags=0xD10000 {build.path}/srmodels.bin
|
|
twatchs3.menu.PartitionScheme.esp_sr_16.build.partitions=esp_sr_16
|
|
twatchs3.menu.PartitionScheme.custom=Custom
|
|
twatchs3.menu.PartitionScheme.custom.build.partitions=
|
|
twatchs3.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
twatchs3.menu.CPUFreq.240=240MHz (WiFi)
|
|
twatchs3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
twatchs3.menu.CPUFreq.160=160MHz (WiFi)
|
|
twatchs3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
twatchs3.menu.CPUFreq.80=80MHz (WiFi)
|
|
twatchs3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
twatchs3.menu.CPUFreq.40=40MHz
|
|
twatchs3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
twatchs3.menu.CPUFreq.20=20MHz
|
|
twatchs3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
twatchs3.menu.CPUFreq.10=10MHz
|
|
twatchs3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
twatchs3.menu.UploadSpeed.921600=921600
|
|
twatchs3.menu.UploadSpeed.921600.upload.speed=921600
|
|
twatchs3.menu.UploadSpeed.115200=115200
|
|
twatchs3.menu.UploadSpeed.115200.upload.speed=115200
|
|
twatchs3.menu.UploadSpeed.256000.windows=256000
|
|
twatchs3.menu.UploadSpeed.256000.upload.speed=256000
|
|
twatchs3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
twatchs3.menu.UploadSpeed.230400=230400
|
|
twatchs3.menu.UploadSpeed.230400.upload.speed=230400
|
|
twatchs3.menu.UploadSpeed.460800.linux=460800
|
|
twatchs3.menu.UploadSpeed.460800.macosx=460800
|
|
twatchs3.menu.UploadSpeed.460800.upload.speed=460800
|
|
twatchs3.menu.UploadSpeed.512000.windows=512000
|
|
twatchs3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
twatchs3.menu.DebugLevel.none=None
|
|
twatchs3.menu.DebugLevel.none.build.code_debug=0
|
|
twatchs3.menu.DebugLevel.error=Error
|
|
twatchs3.menu.DebugLevel.error.build.code_debug=1
|
|
twatchs3.menu.DebugLevel.warn=Warn
|
|
twatchs3.menu.DebugLevel.warn.build.code_debug=2
|
|
twatchs3.menu.DebugLevel.info=Info
|
|
twatchs3.menu.DebugLevel.info.build.code_debug=3
|
|
twatchs3.menu.DebugLevel.debug=Debug
|
|
twatchs3.menu.DebugLevel.debug.build.code_debug=4
|
|
twatchs3.menu.DebugLevel.verbose=Verbose
|
|
twatchs3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
twatchs3.menu.EraseFlash.none=Disabled
|
|
twatchs3.menu.EraseFlash.none.upload.erase_cmd=
|
|
twatchs3.menu.EraseFlash.all=Enabled
|
|
twatchs3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
twatchs3.menu.Revision.Radio_SX1280=Radio-SX1280
|
|
twatchs3.menu.Revision.Radio_SX1280.build.board=LILYGO_LORA_SX1280
|
|
twatchs3.menu.Revision.Radio_SX1262=Radio-SX1262
|
|
twatchs3.menu.Revision.Radio_SX1262.build.board=LILYGO_LORA_SX1262
|
|
|
|
##############################################################
|
|
|
|
|
|
twatch_ultra.name=LilyGo T-Watch-Ultra
|
|
|
|
twatch_ultra.bootloader.tool=esptool_py
|
|
twatch_ultra.bootloader.tool.default=esptool_py
|
|
|
|
twatch_ultra.upload.tool=esptool_py
|
|
twatch_ultra.upload.tool.default=esptool_py
|
|
twatch_ultra.upload.tool.network=esp_ota
|
|
|
|
twatch_ultra.upload.maximum_size=1310720
|
|
twatch_ultra.upload.maximum_data_size=327680
|
|
twatch_ultra.upload.flags=
|
|
twatch_ultra.upload.extra_flags=
|
|
twatch_ultra.upload.use_1200bps_touch=false
|
|
twatch_ultra.upload.wait_for_upload_port=false
|
|
|
|
twatch_ultra.serial.disableDTR=false
|
|
twatch_ultra.serial.disableRTS=false
|
|
|
|
twatch_ultra.build.tarch=xtensa
|
|
twatch_ultra.build.bootloader_addr=0x0
|
|
twatch_ultra.build.target=esp32s3
|
|
twatch_ultra.build.mcu=esp32s3
|
|
twatch_ultra.build.core=esp32
|
|
twatch_ultra.build.variant=lilygo_twatch_ultra
|
|
twatch_ultra.build.board=T_WATCH_S3_ULTRA
|
|
|
|
twatch_ultra.build.usb_mode=1
|
|
twatch_ultra.build.cdc_on_boot=1
|
|
twatch_ultra.build.msc_on_boot=0
|
|
twatch_ultra.build.dfu_on_boot=0
|
|
twatch_ultra.build.f_cpu=240000000L
|
|
twatch_ultra.build.flash_size=16MB
|
|
twatch_ultra.build.flash_freq=80m
|
|
twatch_ultra.build.flash_mode=dio
|
|
twatch_ultra.build.boot=qio
|
|
twatch_ultra.build.boot_freq=80m
|
|
twatch_ultra.build.partitions=app3M_fat9M_16MB
|
|
twatch_ultra.build.defines=-DBOARD_HAS_PSRAM -DARDUINO_T_WATCH_S3_ULTRA
|
|
twatch_ultra.build.loop_core=
|
|
twatch_ultra.build.event_core=
|
|
twatch_ultra.build.psram_type=qspi
|
|
twatch_ultra.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
twatch_ultra.menu.JTAGAdapter.default=Disabled
|
|
twatch_ultra.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
twatch_ultra.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
twatch_ultra.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
twatch_ultra.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
|
|
twatch_ultra.menu.LoopCore.1=Core 1
|
|
twatch_ultra.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
twatch_ultra.menu.LoopCore.0=Core 0
|
|
twatch_ultra.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
twatch_ultra.menu.EventsCore.1=Core 1
|
|
twatch_ultra.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
twatch_ultra.menu.EventsCore.0=Core 0
|
|
twatch_ultra.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
twatch_ultra.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
twatch_ultra.menu.USBMode.hwcdc.build.usb_mode=1
|
|
twatch_ultra.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
twatch_ultra.menu.USBMode.default.build.usb_mode=0
|
|
|
|
twatch_ultra.menu.CDCOnBoot.default=Enabled
|
|
twatch_ultra.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
twatch_ultra.menu.CDCOnBoot.cdc=Disabled
|
|
twatch_ultra.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
|
|
|
|
twatch_ultra.menu.MSCOnBoot.default=Disabled
|
|
twatch_ultra.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
twatch_ultra.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
twatch_ultra.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
twatch_ultra.menu.DFUOnBoot.default=Disabled
|
|
twatch_ultra.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
twatch_ultra.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
twatch_ultra.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
twatch_ultra.menu.UploadMode.default=UART0 / Hardware CDC
|
|
twatch_ultra.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
twatch_ultra.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
twatch_ultra.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
twatch_ultra.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
twatch_ultra.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
twatch_ultra.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
twatch_ultra.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
twatch_ultra.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
twatch_ultra.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
twatch_ultra.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
twatch_ultra.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
twatch_ultra.menu.PartitionScheme.rainmaker=RainMaker
|
|
twatch_ultra.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
twatch_ultra.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
twatch_ultra.menu.PartitionScheme.esp_sr_16=ESP SR 16M (3MB APP/7MB SPIFFS/2.9MB MODEL)
|
|
twatch_ultra.menu.PartitionScheme.esp_sr_16.upload.maximum_size=3145728
|
|
twatch_ultra.menu.PartitionScheme.esp_sr_16.upload.extra_flags=0xD10000 {build.path}/srmodels.bin
|
|
twatch_ultra.menu.PartitionScheme.esp_sr_16.build.partitions=esp_sr_16
|
|
twatch_ultra.menu.PartitionScheme.custom=Custom
|
|
twatch_ultra.menu.PartitionScheme.custom.build.partitions=
|
|
twatch_ultra.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
twatch_ultra.menu.CPUFreq.240=240MHz (WiFi)
|
|
twatch_ultra.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
twatch_ultra.menu.CPUFreq.160=160MHz (WiFi)
|
|
twatch_ultra.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
twatch_ultra.menu.CPUFreq.80=80MHz (WiFi)
|
|
twatch_ultra.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
twatch_ultra.menu.CPUFreq.40=40MHz
|
|
twatch_ultra.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
twatch_ultra.menu.CPUFreq.20=20MHz
|
|
twatch_ultra.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
twatch_ultra.menu.CPUFreq.10=10MHz
|
|
twatch_ultra.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
twatch_ultra.menu.UploadSpeed.921600=921600
|
|
twatch_ultra.menu.UploadSpeed.921600.upload.speed=921600
|
|
twatch_ultra.menu.UploadSpeed.115200=115200
|
|
twatch_ultra.menu.UploadSpeed.115200.upload.speed=115200
|
|
twatch_ultra.menu.UploadSpeed.256000.windows=256000
|
|
twatch_ultra.menu.UploadSpeed.256000.upload.speed=256000
|
|
twatch_ultra.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
twatch_ultra.menu.UploadSpeed.230400=230400
|
|
twatch_ultra.menu.UploadSpeed.230400.upload.speed=230400
|
|
twatch_ultra.menu.UploadSpeed.460800.linux=460800
|
|
twatch_ultra.menu.UploadSpeed.460800.macosx=460800
|
|
twatch_ultra.menu.UploadSpeed.460800.upload.speed=460800
|
|
twatch_ultra.menu.UploadSpeed.512000.windows=512000
|
|
twatch_ultra.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
twatch_ultra.menu.DebugLevel.none=None
|
|
twatch_ultra.menu.DebugLevel.none.build.code_debug=0
|
|
twatch_ultra.menu.DebugLevel.error=Error
|
|
twatch_ultra.menu.DebugLevel.error.build.code_debug=1
|
|
twatch_ultra.menu.DebugLevel.warn=Warn
|
|
twatch_ultra.menu.DebugLevel.warn.build.code_debug=2
|
|
twatch_ultra.menu.DebugLevel.info=Info
|
|
twatch_ultra.menu.DebugLevel.info.build.code_debug=3
|
|
twatch_ultra.menu.DebugLevel.debug=Debug
|
|
twatch_ultra.menu.DebugLevel.debug.build.code_debug=4
|
|
twatch_ultra.menu.DebugLevel.verbose=Verbose
|
|
twatch_ultra.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
twatch_ultra.menu.EraseFlash.none=Disabled
|
|
twatch_ultra.menu.EraseFlash.none.upload.erase_cmd=
|
|
twatch_ultra.menu.EraseFlash.all=Enabled
|
|
twatch_ultra.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
twatch_ultra.menu.Revision.Radio_SX1280=Radio-SX1280
|
|
twatch_ultra.menu.Revision.Radio_SX1280.build.board=LILYGO_LORA_SX1280
|
|
twatch_ultra.menu.Revision.Radio_SX1262=Radio-SX1262
|
|
twatch_ultra.menu.Revision.Radio_SX1262.build.board=LILYGO_LORA_SX1262
|
|
|
|
|
|
##############################################################
|
|
|
|
micros2.name=microS2
|
|
micros2.vid.0=0x239A
|
|
micros2.pid.0=0x80C5
|
|
|
|
micros2.bootloader.tool=esptool_py
|
|
micros2.bootloader.tool.default=esptool_py
|
|
|
|
micros2.upload.tool=esptool_py
|
|
micros2.upload.tool.default=esptool_py
|
|
micros2.upload.tool.network=esp_ota
|
|
|
|
micros2.upload.maximum_size=1310720
|
|
micros2.upload.maximum_data_size=327680
|
|
micros2.upload.flags=
|
|
micros2.upload.extra_flags=
|
|
micros2.upload.use_1200bps_touch=true
|
|
micros2.upload.wait_for_upload_port=true
|
|
|
|
micros2.serial.disableDTR=false
|
|
micros2.serial.disableRTS=false
|
|
|
|
micros2.build.tarch=xtensa
|
|
micros2.build.bootloader_addr=0x1000
|
|
micros2.build.target=esp32s2
|
|
micros2.build.mcu=esp32s2
|
|
micros2.build.core=esp32
|
|
micros2.build.variant=micro_s2
|
|
micros2.build.board=MICROS2
|
|
|
|
micros2.build.cdc_on_boot=1
|
|
micros2.build.msc_on_boot=1
|
|
micros2.build.dfu_on_boot=0
|
|
micros2.build.f_cpu=240000000L
|
|
micros2.build.flash_size=16MB
|
|
micros2.build.flash_freq=80m
|
|
micros2.build.flash_mode=dio
|
|
micros2.build.boot=qio
|
|
micros2.build.partitions=fatflash
|
|
micros2.build.defines=
|
|
|
|
micros2.menu.CDCOnBoot.cdc=Enabled
|
|
micros2.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
micros2.menu.CDCOnBoot.default=Disabled
|
|
micros2.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
micros2.menu.MSCOnBoot.msc=Enabled
|
|
micros2.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
micros2.menu.MSCOnBoot.default=Disabled
|
|
micros2.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
|
|
micros2.menu.DFUOnBoot.default=Disabled
|
|
micros2.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
micros2.menu.DFUOnBoot.dfu=Enabled
|
|
micros2.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
micros2.menu.PSRAM.enabled=Enabled
|
|
micros2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
micros2.menu.PSRAM.disabled=Disabled
|
|
micros2.menu.PSRAM.disabled.build.defines=
|
|
|
|
micros2.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
micros2.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
micros2.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
micros2.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
micros2.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
micros2.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
micros2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
micros2.menu.PartitionScheme.default.build.partitions=default
|
|
micros2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
micros2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
micros2.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
micros2.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
micros2.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
micros2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
micros2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
micros2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
micros2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
micros2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
micros2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
micros2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
micros2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
micros2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
micros2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
micros2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
micros2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
micros2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
micros2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
micros2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
micros2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
micros2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
micros2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
micros2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
micros2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
micros2.menu.CPUFreq.240=240MHz (WiFi)
|
|
micros2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
micros2.menu.CPUFreq.160=160MHz (WiFi)
|
|
micros2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
micros2.menu.CPUFreq.80=80MHz (WiFi)
|
|
micros2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
micros2.menu.CPUFreq.40=40MHz
|
|
micros2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
micros2.menu.CPUFreq.20=20MHz
|
|
micros2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
micros2.menu.CPUFreq.10=10MHz
|
|
micros2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
micros2.menu.FlashSize.16M=16MB (128Mb)
|
|
micros2.menu.FlashSize.16M.build.flash_size=16MB
|
|
micros2.menu.FlashSize.4M=4MB (32Mb)
|
|
micros2.menu.FlashSize.4M.build.flash_size=4MB
|
|
micros2.menu.FlashSize.8M=8MB (64Mb)
|
|
micros2.menu.FlashSize.8M.build.flash_size=8MB
|
|
micros2.menu.FlashSize.8M.build.partitions=default_8MB
|
|
micros2.menu.FlashSize.2M=2MB (16Mb)
|
|
micros2.menu.FlashSize.2M.build.flash_size=2MB
|
|
micros2.menu.FlashSize.2M.build.partitions=minimal
|
|
|
|
micros2.menu.UploadSpeed.921600=921600
|
|
micros2.menu.UploadSpeed.921600.upload.speed=921600
|
|
micros2.menu.UploadSpeed.115200=115200
|
|
micros2.menu.UploadSpeed.115200.upload.speed=115200
|
|
micros2.menu.UploadSpeed.256000.windows=256000
|
|
micros2.menu.UploadSpeed.256000.upload.speed=256000
|
|
micros2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
micros2.menu.UploadSpeed.230400=230400
|
|
micros2.menu.UploadSpeed.230400.upload.speed=230400
|
|
micros2.menu.UploadSpeed.460800.linux=460800
|
|
micros2.menu.UploadSpeed.460800.macosx=460800
|
|
micros2.menu.UploadSpeed.460800.upload.speed=460800
|
|
|
|
micros2.menu.DebugLevel.none=None
|
|
micros2.menu.DebugLevel.none.build.code_debug=0
|
|
micros2.menu.DebugLevel.error=Error
|
|
micros2.menu.DebugLevel.error.build.code_debug=1
|
|
micros2.menu.DebugLevel.warn=Warn
|
|
micros2.menu.DebugLevel.warn.build.code_debug=2
|
|
micros2.menu.DebugLevel.info=Info
|
|
micros2.menu.DebugLevel.info.build.code_debug=3
|
|
micros2.menu.DebugLevel.debug=Debug
|
|
micros2.menu.DebugLevel.debug.build.code_debug=4
|
|
micros2.menu.DebugLevel.verbose=Verbose
|
|
micros2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
micros2.menu.EraseFlash.none=Disabled
|
|
micros2.menu.EraseFlash.none.upload.erase_cmd=
|
|
micros2.menu.EraseFlash.all=Enabled
|
|
micros2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
magicbit.name=MagicBit
|
|
|
|
magicbit.bootloader.tool=esptool_py
|
|
magicbit.bootloader.tool.default=esptool_py
|
|
|
|
magicbit.upload.tool=esptool_py
|
|
magicbit.upload.tool.default=esptool_py
|
|
magicbit.upload.tool.network=esp_ota
|
|
|
|
magicbit.upload.maximum_size=1310720
|
|
magicbit.upload.maximum_data_size=327680
|
|
magicbit.upload.flags=
|
|
magicbit.upload.extra_flags=
|
|
|
|
magicbit.serial.disableDTR=true
|
|
magicbit.serial.disableRTS=true
|
|
|
|
magicbit.build.tarch=xtensa
|
|
magicbit.build.bootloader_addr=0x1000
|
|
magicbit.build.target=esp32
|
|
magicbit.build.mcu=esp32
|
|
magicbit.build.core=esp32
|
|
magicbit.build.variant=magicbit
|
|
magicbit.build.board=ESP32_DEV
|
|
|
|
magicbit.build.f_cpu=240000000L
|
|
magicbit.build.flash_size=4MB
|
|
magicbit.build.flash_freq=40m
|
|
magicbit.build.flash_mode=dio
|
|
magicbit.build.boot=dio
|
|
magicbit.build.partitions=default
|
|
|
|
magicbit.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
magicbit.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
magicbit.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
magicbit.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
magicbit.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
magicbit.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
magicbit.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
|
|
magicbit.menu.UploadSpeed.921600=921600
|
|
magicbit.menu.UploadSpeed.921600.upload.speed=921600
|
|
magicbit.menu.UploadSpeed.115200=115200
|
|
magicbit.menu.UploadSpeed.115200.upload.speed=115200
|
|
|
|
magicbit.menu.DebugLevel.none=None
|
|
magicbit.menu.DebugLevel.none.build.code_debug=0
|
|
magicbit.menu.DebugLevel.error=Error
|
|
magicbit.menu.DebugLevel.error.build.code_debug=1
|
|
magicbit.menu.DebugLevel.warn=Warn
|
|
magicbit.menu.DebugLevel.warn.build.code_debug=2
|
|
magicbit.menu.DebugLevel.info=Info
|
|
magicbit.menu.DebugLevel.info.build.code_debug=3
|
|
magicbit.menu.DebugLevel.debug=Debug
|
|
magicbit.menu.DebugLevel.debug.build.code_debug=4
|
|
magicbit.menu.DebugLevel.verbose=Verbose
|
|
magicbit.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
magicbit.menu.EraseFlash.none=Disabled
|
|
magicbit.menu.EraseFlash.none.upload.erase_cmd=
|
|
magicbit.menu.EraseFlash.all=Enabled
|
|
magicbit.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
turta_iot_node.name=Turta IoT Node
|
|
|
|
turta_iot_node.bootloader.tool=esptool_py
|
|
turta_iot_node.bootloader.tool.default=esptool_py
|
|
|
|
turta_iot_node.upload.tool=esptool_py
|
|
turta_iot_node.upload.tool.default=esptool_py
|
|
turta_iot_node.upload.tool.network=esp_ota
|
|
|
|
turta_iot_node.upload.maximum_size=1310720
|
|
turta_iot_node.upload.maximum_data_size=327680
|
|
turta_iot_node.upload.flags=
|
|
turta_iot_node.upload.extra_flags=
|
|
|
|
turta_iot_node.serial.disableDTR=true
|
|
turta_iot_node.serial.disableRTS=true
|
|
|
|
turta_iot_node.build.tarch=xtensa
|
|
turta_iot_node.build.bootloader_addr=0x1000
|
|
turta_iot_node.build.target=esp32
|
|
turta_iot_node.build.mcu=esp32
|
|
turta_iot_node.build.core=esp32
|
|
turta_iot_node.build.variant=pico32
|
|
turta_iot_node.build.board=ESP32_PICO
|
|
|
|
turta_iot_node.build.f_cpu=240000000L
|
|
turta_iot_node.build.flash_size=4MB
|
|
turta_iot_node.build.flash_freq=80m
|
|
turta_iot_node.build.flash_mode=dio
|
|
turta_iot_node.build.boot=dio
|
|
turta_iot_node.build.partitions=default
|
|
turta_iot_node.build.defines=
|
|
|
|
turta_iot_node.menu.UploadSpeed.921600=921600
|
|
turta_iot_node.menu.UploadSpeed.921600.upload.speed=921600
|
|
turta_iot_node.menu.UploadSpeed.115200=115200
|
|
turta_iot_node.menu.UploadSpeed.115200.upload.speed=115200
|
|
|
|
turta_iot_node.menu.DebugLevel.none=None
|
|
turta_iot_node.menu.DebugLevel.none.build.code_debug=0
|
|
turta_iot_node.menu.DebugLevel.error=Error
|
|
turta_iot_node.menu.DebugLevel.error.build.code_debug=1
|
|
turta_iot_node.menu.DebugLevel.warn=Warn
|
|
turta_iot_node.menu.DebugLevel.warn.build.code_debug=2
|
|
turta_iot_node.menu.DebugLevel.info=Info
|
|
turta_iot_node.menu.DebugLevel.info.build.code_debug=3
|
|
turta_iot_node.menu.DebugLevel.debug=Debug
|
|
turta_iot_node.menu.DebugLevel.debug.build.code_debug=4
|
|
turta_iot_node.menu.DebugLevel.verbose=Verbose
|
|
turta_iot_node.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
turta_iot_node.menu.EraseFlash.none=Disabled
|
|
turta_iot_node.menu.EraseFlash.none.upload.erase_cmd=
|
|
turta_iot_node.menu.EraseFlash.all=Enabled
|
|
turta_iot_node.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
ttgo-lora32.name=TTGO LoRa32-OLED
|
|
|
|
ttgo-lora32.bootloader.tool=esptool_py
|
|
ttgo-lora32.bootloader.tool.default=esptool_py
|
|
|
|
ttgo-lora32.upload.tool=esptool_py
|
|
ttgo-lora32.upload.tool.default=esptool_py
|
|
ttgo-lora32.upload.tool.network=esp_ota
|
|
|
|
ttgo-lora32.upload.maximum_size=1310720
|
|
ttgo-lora32.upload.maximum_data_size=294912
|
|
ttgo-lora32.upload.flags=
|
|
ttgo-lora32.upload.extra_flags=
|
|
|
|
ttgo-lora32.serial.disableDTR=true
|
|
ttgo-lora32.serial.disableRTS=true
|
|
|
|
ttgo-lora32.build.tarch=xtensa
|
|
ttgo-lora32.build.bootloader_addr=0x1000
|
|
ttgo-lora32.build.target=esp32
|
|
ttgo-lora32.build.mcu=esp32
|
|
ttgo-lora32.build.core=esp32
|
|
ttgo-lora32.build.board=TTGO_LoRa32
|
|
|
|
ttgo-lora32.menu.Revision.TTGO_LoRa32_V1=TTGO LoRa32 V1 (No TFCard)
|
|
ttgo-lora32.menu.Revision.TTGO_LoRa32_V1.build.board=TTGO_LoRa32_V1
|
|
ttgo-lora32.menu.Revision.TTGO_LoRa32_V1.build.variant=ttgo-lora32-v1
|
|
|
|
ttgo-lora32.menu.Revision.TTGO_LoRa32_V2=TTGO LoRa32 V2
|
|
ttgo-lora32.menu.Revision.TTGO_LoRa32_V2.build.board=TTGO_LoRa32_V2
|
|
ttgo-lora32.menu.Revision.TTGO_LoRa32_V2.build.variant=ttgo-lora32-v2
|
|
|
|
ttgo-lora32.menu.Revision.TTGO_LoRa32_v21new=TTGO LoRa32 V2.1 (1.6.1)
|
|
ttgo-lora32.menu.Revision.TTGO_LoRa32_v21new.build.board=TTGO_LoRa32_v21new
|
|
ttgo-lora32.menu.Revision.TTGO_LoRa32_v21new.build.variant=ttgo-lora32-v21new
|
|
|
|
ttgo-lora32.build.f_cpu=240000000L
|
|
ttgo-lora32.build.flash_mode=dio
|
|
ttgo-lora32.build.flash_size=4MB
|
|
ttgo-lora32.build.boot=dio
|
|
ttgo-lora32.build.partitions=default
|
|
|
|
ttgo-lora32.menu.FlashFreq.80=80MHz
|
|
ttgo-lora32.menu.FlashFreq.80.build.flash_freq=80m
|
|
ttgo-lora32.menu.FlashFreq.40=40MHz
|
|
ttgo-lora32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
ttgo-lora32.menu.UploadSpeed.921600=921600
|
|
ttgo-lora32.menu.UploadSpeed.921600.upload.speed=921600
|
|
ttgo-lora32.menu.UploadSpeed.115200=115200
|
|
ttgo-lora32.menu.UploadSpeed.115200.upload.speed=115200
|
|
ttgo-lora32.menu.UploadSpeed.256000.windows=256000
|
|
ttgo-lora32.menu.UploadSpeed.256000.upload.speed=256000
|
|
ttgo-lora32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
ttgo-lora32.menu.UploadSpeed.230400=230400
|
|
ttgo-lora32.menu.UploadSpeed.230400.upload.speed=230400
|
|
ttgo-lora32.menu.UploadSpeed.460800.linux=460800
|
|
ttgo-lora32.menu.UploadSpeed.460800.macosx=460800
|
|
ttgo-lora32.menu.UploadSpeed.460800.upload.speed=460800
|
|
ttgo-lora32.menu.UploadSpeed.512000.windows=512000
|
|
ttgo-lora32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
ttgo-lora32.menu.DebugLevel.none=None
|
|
ttgo-lora32.menu.DebugLevel.none.build.code_debug=0
|
|
ttgo-lora32.menu.DebugLevel.error=Error
|
|
ttgo-lora32.menu.DebugLevel.error.build.code_debug=1
|
|
ttgo-lora32.menu.DebugLevel.warn=Warn
|
|
ttgo-lora32.menu.DebugLevel.warn.build.code_debug=2
|
|
ttgo-lora32.menu.DebugLevel.info=Info
|
|
ttgo-lora32.menu.DebugLevel.info.build.code_debug=3
|
|
ttgo-lora32.menu.DebugLevel.debug=Debug
|
|
ttgo-lora32.menu.DebugLevel.debug.build.code_debug=4
|
|
ttgo-lora32.menu.DebugLevel.verbose=Verbose
|
|
ttgo-lora32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
ttgo-lora32.menu.EraseFlash.none=Disabled
|
|
ttgo-lora32.menu.EraseFlash.none.upload.erase_cmd=
|
|
ttgo-lora32.menu.EraseFlash.all=Enabled
|
|
ttgo-lora32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
ttgo-t1.name=TTGO T1
|
|
|
|
ttgo-t1.bootloader.tool=esptool_py
|
|
ttgo-t1.bootloader.tool.default=esptool_py
|
|
|
|
ttgo-t1.upload.tool=esptool_py
|
|
ttgo-t1.upload.tool.default=esptool_py
|
|
ttgo-t1.upload.tool.network=esp_ota
|
|
|
|
ttgo-t1.upload.maximum_size=1310720
|
|
ttgo-t1.upload.maximum_data_size=327680
|
|
ttgo-t1.upload.flags=
|
|
ttgo-t1.upload.extra_flags=
|
|
|
|
ttgo-t1.serial.disableDTR=true
|
|
ttgo-t1.serial.disableRTS=true
|
|
|
|
ttgo-t1.build.tarch=xtensa
|
|
ttgo-t1.build.bootloader_addr=0x1000
|
|
ttgo-t1.build.target=esp32
|
|
ttgo-t1.build.mcu=esp32
|
|
ttgo-t1.build.core=esp32
|
|
ttgo-t1.build.variant=ttgo-t1
|
|
ttgo-t1.build.board=TTGO_T1
|
|
|
|
ttgo-t1.build.f_cpu=240000000L
|
|
ttgo-t1.build.flash_size=4MB
|
|
ttgo-t1.build.flash_freq=40m
|
|
ttgo-t1.build.flash_mode=dio
|
|
ttgo-t1.build.boot=dio
|
|
ttgo-t1.build.partitions=default
|
|
ttgo-t1.build.defines=
|
|
|
|
ttgo-t1.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
ttgo-t1.menu.PartitionScheme.default.build.partitions=default
|
|
ttgo-t1.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
ttgo-t1.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
ttgo-t1.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
ttgo-t1.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
ttgo-t1.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
ttgo-t1.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
ttgo-t1.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
ttgo-t1.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
ttgo-t1.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
ttgo-t1.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
ttgo-t1.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
ttgo-t1.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
ttgo-t1.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
ttgo-t1.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
ttgo-t1.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
ttgo-t1.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
ttgo-t1.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
ttgo-t1.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
ttgo-t1.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
ttgo-t1.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
ttgo-t1.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
ttgo-t1.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
ttgo-t1.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
ttgo-t1.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
ttgo-t1.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
ttgo-t1.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
ttgo-t1.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
ttgo-t1.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
ttgo-t1.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
ttgo-t1.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
ttgo-t1.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
ttgo-t1.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
ttgo-t1.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
ttgo-t1.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
ttgo-t1.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
ttgo-t1.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
ttgo-t1.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
ttgo-t1.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
ttgo-t1.menu.FlashMode.qio=QIO
|
|
ttgo-t1.menu.FlashMode.qio.build.flash_mode=dio
|
|
ttgo-t1.menu.FlashMode.qio.build.boot=qio
|
|
ttgo-t1.menu.FlashMode.dio=DIO
|
|
ttgo-t1.menu.FlashMode.dio.build.flash_mode=dio
|
|
ttgo-t1.menu.FlashMode.dio.build.boot=dio
|
|
|
|
ttgo-t1.menu.FlashFreq.80=80MHz
|
|
ttgo-t1.menu.FlashFreq.80.build.flash_freq=80m
|
|
ttgo-t1.menu.FlashFreq.40=40MHz
|
|
ttgo-t1.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
ttgo-t1.menu.FlashSize.4M=4MB (32Mb)
|
|
ttgo-t1.menu.FlashSize.4M.build.flash_size=4MB
|
|
ttgo-t1.menu.FlashSize.2M=2MB (16Mb)
|
|
ttgo-t1.menu.FlashSize.2M.build.flash_size=2MB
|
|
ttgo-t1.menu.FlashSize.2M.build.partitions=minimal
|
|
ttgo-t1.menu.FlashSize.16M=16MB (128Mb)
|
|
ttgo-t1.menu.FlashSize.16M.build.flash_size=16MB
|
|
ttgo-t1.menu.FlashSize.16M.build.partitions=ffat
|
|
|
|
ttgo-t1.menu.UploadSpeed.921600=921600
|
|
ttgo-t1.menu.UploadSpeed.921600.upload.speed=921600
|
|
ttgo-t1.menu.UploadSpeed.115200=115200
|
|
ttgo-t1.menu.UploadSpeed.115200.upload.speed=115200
|
|
ttgo-t1.menu.UploadSpeed.256000.windows=256000
|
|
ttgo-t1.menu.UploadSpeed.256000.upload.speed=256000
|
|
ttgo-t1.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
ttgo-t1.menu.UploadSpeed.230400=230400
|
|
ttgo-t1.menu.UploadSpeed.230400.upload.speed=230400
|
|
ttgo-t1.menu.UploadSpeed.460800.linux=460800
|
|
ttgo-t1.menu.UploadSpeed.460800.macosx=460800
|
|
ttgo-t1.menu.UploadSpeed.460800.upload.speed=460800
|
|
ttgo-t1.menu.UploadSpeed.512000.windows=512000
|
|
ttgo-t1.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
ttgo-t1.menu.DebugLevel.none=None
|
|
ttgo-t1.menu.DebugLevel.none.build.code_debug=0
|
|
ttgo-t1.menu.DebugLevel.error=Error
|
|
ttgo-t1.menu.DebugLevel.error.build.code_debug=1
|
|
ttgo-t1.menu.DebugLevel.warn=Warn
|
|
ttgo-t1.menu.DebugLevel.warn.build.code_debug=2
|
|
ttgo-t1.menu.DebugLevel.info=Info
|
|
ttgo-t1.menu.DebugLevel.info.build.code_debug=3
|
|
ttgo-t1.menu.DebugLevel.debug=Debug
|
|
ttgo-t1.menu.DebugLevel.debug.build.code_debug=4
|
|
ttgo-t1.menu.DebugLevel.verbose=Verbose
|
|
ttgo-t1.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
ttgo-t1.menu.EraseFlash.none=Disabled
|
|
ttgo-t1.menu.EraseFlash.none.upload.erase_cmd=
|
|
ttgo-t1.menu.EraseFlash.all=Enabled
|
|
ttgo-t1.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
ttgo-t7-v13-mini32.name=TTGO T7 V1.3 Mini32
|
|
|
|
ttgo-t7-v13-mini32.bootloader.tool=esptool_py
|
|
ttgo-t7-v13-mini32.bootloader.tool.default=esptool_py
|
|
|
|
ttgo-t7-v13-mini32.upload.tool=esptool_py
|
|
ttgo-t7-v13-mini32.upload.tool.default=esptool_py
|
|
ttgo-t7-v13-mini32.upload.tool.network=esp_ota
|
|
|
|
ttgo-t7-v13-mini32.upload.maximum_size=1310720
|
|
ttgo-t7-v13-mini32.upload.maximum_data_size=327680
|
|
ttgo-t7-v13-mini32.upload.wait_for_upload_port=true
|
|
ttgo-t7-v13-mini32.upload.flags=
|
|
ttgo-t7-v13-mini32.upload.extra_flags=
|
|
|
|
ttgo-t7-v13-mini32.serial.disableDTR=true
|
|
ttgo-t7-v13-mini32.serial.disableRTS=true
|
|
|
|
ttgo-t7-v13-mini32.build.tarch=xtensa
|
|
ttgo-t7-v13-mini32.build.bootloader_addr=0x1000
|
|
ttgo-t7-v13-mini32.build.target=esp32
|
|
ttgo-t7-v13-mini32.build.mcu=esp32
|
|
ttgo-t7-v13-mini32.build.core=esp32
|
|
ttgo-t7-v13-mini32.build.variant=ttgo-t7-v13-mini32
|
|
ttgo-t7-v13-mini32.build.board=TTGO_T7_V13_Mini32
|
|
|
|
ttgo-t7-v13-mini32.build.f_cpu=240000000L
|
|
ttgo-t7-v13-mini32.build.flash_size=4MB
|
|
ttgo-t7-v13-mini32.build.flash_freq=40m
|
|
ttgo-t7-v13-mini32.build.flash_mode=dio
|
|
ttgo-t7-v13-mini32.build.boot=dio
|
|
ttgo-t7-v13-mini32.build.partitions=default
|
|
ttgo-t7-v13-mini32.build.defines=
|
|
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.default.build.partitions=default
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
ttgo-t7-v13-mini32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
ttgo-t7-v13-mini32.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
ttgo-t7-v13-mini32.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
ttgo-t7-v13-mini32.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
ttgo-t7-v13-mini32.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
ttgo-t7-v13-mini32.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
ttgo-t7-v13-mini32.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
ttgo-t7-v13-mini32.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
ttgo-t7-v13-mini32.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
ttgo-t7-v13-mini32.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
ttgo-t7-v13-mini32.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
ttgo-t7-v13-mini32.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
ttgo-t7-v13-mini32.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
ttgo-t7-v13-mini32.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
ttgo-t7-v13-mini32.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
ttgo-t7-v13-mini32.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
ttgo-t7-v13-mini32.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
ttgo-t7-v13-mini32.menu.FlashMode.qio=QIO
|
|
ttgo-t7-v13-mini32.menu.FlashMode.qio.build.flash_mode=dio
|
|
ttgo-t7-v13-mini32.menu.FlashMode.qio.build.boot=qio
|
|
ttgo-t7-v13-mini32.menu.FlashMode.dio=DIO
|
|
ttgo-t7-v13-mini32.menu.FlashMode.dio.build.flash_mode=dio
|
|
ttgo-t7-v13-mini32.menu.FlashMode.dio.build.boot=dio
|
|
|
|
ttgo-t7-v13-mini32.menu.FlashFreq.80=80MHz
|
|
ttgo-t7-v13-mini32.menu.FlashFreq.80.build.flash_freq=80m
|
|
ttgo-t7-v13-mini32.menu.FlashFreq.40=40MHz
|
|
ttgo-t7-v13-mini32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
ttgo-t7-v13-mini32.menu.FlashSize.4M=4MB (32Mb)
|
|
ttgo-t7-v13-mini32.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
ttgo-t7-v13-mini32.menu.UploadSpeed.921600=921600
|
|
ttgo-t7-v13-mini32.menu.UploadSpeed.921600.upload.speed=921600
|
|
ttgo-t7-v13-mini32.menu.UploadSpeed.115200=115200
|
|
ttgo-t7-v13-mini32.menu.UploadSpeed.115200.upload.speed=115200
|
|
ttgo-t7-v13-mini32.menu.UploadSpeed.256000.windows=256000
|
|
ttgo-t7-v13-mini32.menu.UploadSpeed.256000.upload.speed=256000
|
|
ttgo-t7-v13-mini32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
ttgo-t7-v13-mini32.menu.UploadSpeed.230400=230400
|
|
ttgo-t7-v13-mini32.menu.UploadSpeed.230400.upload.speed=230400
|
|
ttgo-t7-v13-mini32.menu.UploadSpeed.460800.linux=460800
|
|
ttgo-t7-v13-mini32.menu.UploadSpeed.460800.macosx=460800
|
|
ttgo-t7-v13-mini32.menu.UploadSpeed.460800.upload.speed=460800
|
|
ttgo-t7-v13-mini32.menu.UploadSpeed.512000.windows=512000
|
|
ttgo-t7-v13-mini32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
ttgo-t7-v13-mini32.menu.DebugLevel.none=None
|
|
ttgo-t7-v13-mini32.menu.DebugLevel.none.build.code_debug=0
|
|
ttgo-t7-v13-mini32.menu.DebugLevel.error=Error
|
|
ttgo-t7-v13-mini32.menu.DebugLevel.error.build.code_debug=1
|
|
ttgo-t7-v13-mini32.menu.DebugLevel.warn=Warn
|
|
ttgo-t7-v13-mini32.menu.DebugLevel.warn.build.code_debug=2
|
|
ttgo-t7-v13-mini32.menu.DebugLevel.info=Info
|
|
ttgo-t7-v13-mini32.menu.DebugLevel.info.build.code_debug=3
|
|
ttgo-t7-v13-mini32.menu.DebugLevel.debug=Debug
|
|
ttgo-t7-v13-mini32.menu.DebugLevel.debug.build.code_debug=4
|
|
ttgo-t7-v13-mini32.menu.DebugLevel.verbose=Verbose
|
|
ttgo-t7-v13-mini32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
ttgo-t7-v13-mini32.menu.EraseFlash.none=Disabled
|
|
ttgo-t7-v13-mini32.menu.EraseFlash.none.upload.erase_cmd=
|
|
ttgo-t7-v13-mini32.menu.EraseFlash.all=Enabled
|
|
ttgo-t7-v13-mini32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
ttgo-t7-v14-mini32.name=TTGO T7 V1.4 Mini32
|
|
|
|
ttgo-t7-v14-mini32.bootloader.tool=esptool_py
|
|
ttgo-t7-v14-mini32.bootloader.tool.default=esptool_py
|
|
|
|
ttgo-t7-v14-mini32.upload.tool=esptool_py
|
|
ttgo-t7-v14-mini32.upload.tool.default=esptool_py
|
|
ttgo-t7-v14-mini32.upload.tool.network=esp_ota
|
|
|
|
ttgo-t7-v14-mini32.upload.maximum_size=1310720
|
|
ttgo-t7-v14-mini32.upload.maximum_data_size=327680
|
|
ttgo-t7-v14-mini32.upload.wait_for_upload_port=true
|
|
ttgo-t7-v14-mini32.upload.flags=
|
|
ttgo-t7-v14-mini32.upload.extra_flags=
|
|
|
|
ttgo-t7-v14-mini32.serial.disableDTR=true
|
|
ttgo-t7-v14-mini32.serial.disableRTS=true
|
|
|
|
ttgo-t7-v14-mini32.build.tarch=xtensa
|
|
ttgo-t7-v14-mini32.build.bootloader_addr=0x1000
|
|
ttgo-t7-v14-mini32.build.target=esp32
|
|
ttgo-t7-v14-mini32.build.mcu=esp32
|
|
ttgo-t7-v14-mini32.build.core=esp32
|
|
ttgo-t7-v14-mini32.build.variant=ttgo-t7-v14-mini32
|
|
ttgo-t7-v14-mini32.build.board=TTGO_T7_V14_Mini32
|
|
|
|
ttgo-t7-v14-mini32.build.f_cpu=240000000L
|
|
ttgo-t7-v14-mini32.build.flash_size=4MB
|
|
ttgo-t7-v14-mini32.build.flash_freq=40m
|
|
ttgo-t7-v14-mini32.build.flash_mode=dio
|
|
ttgo-t7-v14-mini32.build.boot=dio
|
|
ttgo-t7-v14-mini32.build.partitions=default
|
|
ttgo-t7-v14-mini32.build.defines=
|
|
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.default.build.partitions=default
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
ttgo-t7-v14-mini32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
ttgo-t7-v14-mini32.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
ttgo-t7-v14-mini32.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
ttgo-t7-v14-mini32.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
ttgo-t7-v14-mini32.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
ttgo-t7-v14-mini32.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
ttgo-t7-v14-mini32.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
ttgo-t7-v14-mini32.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
ttgo-t7-v14-mini32.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
ttgo-t7-v14-mini32.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
ttgo-t7-v14-mini32.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
ttgo-t7-v14-mini32.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
ttgo-t7-v14-mini32.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
ttgo-t7-v14-mini32.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
ttgo-t7-v14-mini32.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
ttgo-t7-v14-mini32.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
ttgo-t7-v14-mini32.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
ttgo-t7-v14-mini32.menu.FlashMode.qio=QIO
|
|
ttgo-t7-v14-mini32.menu.FlashMode.qio.build.flash_mode=dio
|
|
ttgo-t7-v14-mini32.menu.FlashMode.qio.build.boot=qio
|
|
ttgo-t7-v14-mini32.menu.FlashMode.dio=DIO
|
|
ttgo-t7-v14-mini32.menu.FlashMode.dio.build.flash_mode=dio
|
|
ttgo-t7-v14-mini32.menu.FlashMode.dio.build.boot=dio
|
|
|
|
ttgo-t7-v14-mini32.menu.FlashFreq.80=80MHz
|
|
ttgo-t7-v14-mini32.menu.FlashFreq.80.build.flash_freq=80m
|
|
ttgo-t7-v14-mini32.menu.FlashFreq.40=40MHz
|
|
ttgo-t7-v14-mini32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
ttgo-t7-v14-mini32.menu.FlashSize.4M=4MB (32Mb)
|
|
ttgo-t7-v14-mini32.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
ttgo-t7-v14-mini32.menu.UploadSpeed.921600=921600
|
|
ttgo-t7-v14-mini32.menu.UploadSpeed.921600.upload.speed=921600
|
|
ttgo-t7-v14-mini32.menu.UploadSpeed.115200=115200
|
|
ttgo-t7-v14-mini32.menu.UploadSpeed.115200.upload.speed=115200
|
|
ttgo-t7-v14-mini32.menu.UploadSpeed.256000.windows=256000
|
|
ttgo-t7-v14-mini32.menu.UploadSpeed.256000.upload.speed=256000
|
|
ttgo-t7-v14-mini32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
ttgo-t7-v14-mini32.menu.UploadSpeed.230400=230400
|
|
ttgo-t7-v14-mini32.menu.UploadSpeed.230400.upload.speed=230400
|
|
ttgo-t7-v14-mini32.menu.UploadSpeed.460800.linux=460800
|
|
ttgo-t7-v14-mini32.menu.UploadSpeed.460800.macosx=460800
|
|
ttgo-t7-v14-mini32.menu.UploadSpeed.460800.upload.speed=460800
|
|
ttgo-t7-v14-mini32.menu.UploadSpeed.512000.windows=512000
|
|
ttgo-t7-v14-mini32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
ttgo-t7-v14-mini32.menu.DebugLevel.none=None
|
|
ttgo-t7-v14-mini32.menu.DebugLevel.none.build.code_debug=0
|
|
ttgo-t7-v14-mini32.menu.DebugLevel.error=Error
|
|
ttgo-t7-v14-mini32.menu.DebugLevel.error.build.code_debug=1
|
|
ttgo-t7-v14-mini32.menu.DebugLevel.warn=Warn
|
|
ttgo-t7-v14-mini32.menu.DebugLevel.warn.build.code_debug=2
|
|
ttgo-t7-v14-mini32.menu.DebugLevel.info=Info
|
|
ttgo-t7-v14-mini32.menu.DebugLevel.info.build.code_debug=3
|
|
ttgo-t7-v14-mini32.menu.DebugLevel.debug=Debug
|
|
ttgo-t7-v14-mini32.menu.DebugLevel.debug.build.code_debug=4
|
|
ttgo-t7-v14-mini32.menu.DebugLevel.verbose=Verbose
|
|
ttgo-t7-v14-mini32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
ttgo-t7-v14-mini32.menu.EraseFlash.none=Disabled
|
|
ttgo-t7-v14-mini32.menu.EraseFlash.none.upload.erase_cmd=
|
|
ttgo-t7-v14-mini32.menu.EraseFlash.all=Enabled
|
|
ttgo-t7-v14-mini32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
ttgo-t-oi-plus.name=TTGO T-OI PLUS RISC-V ESP32-C3
|
|
|
|
ttgo-t-oi-plus.bootloader.tool=esptool_py
|
|
ttgo-t-oi-plus.bootloader.tool.default=esptool_py
|
|
|
|
ttgo-t-oi-plus.upload.tool=esptool_py
|
|
ttgo-t-oi-plus.upload.tool.default=esptool_py
|
|
ttgo-t-oi-plus.upload.tool.network=esp_ota
|
|
|
|
ttgo-t-oi-plus.upload.maximum_size=1310720
|
|
ttgo-t-oi-plus.upload.maximum_data_size=327680
|
|
ttgo-t-oi-plus.upload.flags=
|
|
ttgo-t-oi-plus.upload.extra_flags=
|
|
|
|
ttgo-t-oi-plus.serial.disableDTR=false
|
|
ttgo-t-oi-plus.serial.disableRTS=false
|
|
|
|
ttgo-t-oi-plus.build.tarch=riscv32
|
|
ttgo-t-oi-plus.build.target=esp
|
|
ttgo-t-oi-plus.build.mcu=esp32c3
|
|
ttgo-t-oi-plus.build.core=esp32
|
|
ttgo-t-oi-plus.build.variant=ttgo-t-oi-plus
|
|
ttgo-t-oi-plus.build.board=TTGO-T-OI-PLUS_DEV
|
|
ttgo-t-oi-plus.build.bootloader_addr=0x0
|
|
|
|
ttgo-t-oi-plus.build.cdc_on_boot=0
|
|
ttgo-t-oi-plus.build.f_cpu=160000000L
|
|
ttgo-t-oi-plus.build.flash_size=4MB
|
|
ttgo-t-oi-plus.build.flash_freq=80m
|
|
ttgo-t-oi-plus.build.flash_mode=qio
|
|
ttgo-t-oi-plus.build.boot=qio
|
|
ttgo-t-oi-plus.build.partitions=default
|
|
ttgo-t-oi-plus.build.defines=
|
|
|
|
ttgo-t-oi-plus.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
ttgo-t-oi-plus.menu.PartitionScheme.default.build.partitions=default
|
|
ttgo-t-oi-plus.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
ttgo-t-oi-plus.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
ttgo-t-oi-plus.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
ttgo-t-oi-plus.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
ttgo-t-oi-plus.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
ttgo-t-oi-plus.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
ttgo-t-oi-plus.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
ttgo-t-oi-plus.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
ttgo-t-oi-plus.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
ttgo-t-oi-plus.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
ttgo-t-oi-plus.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
ttgo-t-oi-plus.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
ttgo-t-oi-plus.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
ttgo-t-oi-plus.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
ttgo-t-oi-plus.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
ttgo-t-oi-plus.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
ttgo-t-oi-plus.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
ttgo-t-oi-plus.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
ttgo-t-oi-plus.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
ttgo-t-oi-plus.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
ttgo-t-oi-plus.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
ttgo-t-oi-plus.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
ttgo-t-oi-plus.menu.CPUFreq.160=160MHz (WiFi)
|
|
ttgo-t-oi-plus.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
ttgo-t-oi-plus.menu.CPUFreq.80=80MHz (WiFi)
|
|
ttgo-t-oi-plus.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
ttgo-t-oi-plus.menu.CPUFreq.40=40MHz
|
|
ttgo-t-oi-plus.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
ttgo-t-oi-plus.menu.CPUFreq.20=20MHz
|
|
ttgo-t-oi-plus.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
ttgo-t-oi-plus.menu.CPUFreq.10=10MHz
|
|
ttgo-t-oi-plus.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
ttgo-t-oi-plus.menu.FlashMode.qio=QIO
|
|
ttgo-t-oi-plus.menu.FlashMode.qio.build.flash_mode=dio
|
|
ttgo-t-oi-plus.menu.FlashMode.qio.build.boot=qio
|
|
ttgo-t-oi-plus.menu.FlashMode.dio=DIO
|
|
ttgo-t-oi-plus.menu.FlashMode.dio.build.flash_mode=dio
|
|
ttgo-t-oi-plus.menu.FlashMode.dio.build.boot=dio
|
|
|
|
ttgo-t-oi-plus.menu.FlashFreq.80=80MHz
|
|
ttgo-t-oi-plus.menu.FlashFreq.80.build.flash_freq=80m
|
|
ttgo-t-oi-plus.menu.FlashFreq.40=40MHz
|
|
ttgo-t-oi-plus.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
ttgo-t-oi-plus.menu.FlashSize.4M=4MB (32Mb)
|
|
ttgo-t-oi-plus.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
ttgo-t-oi-plus.menu.UploadSpeed.921600=921600
|
|
ttgo-t-oi-plus.menu.UploadSpeed.921600.upload.speed=921600
|
|
ttgo-t-oi-plus.menu.UploadSpeed.115200=115200
|
|
ttgo-t-oi-plus.menu.UploadSpeed.115200.upload.speed=115200
|
|
ttgo-t-oi-plus.menu.UploadSpeed.256000.windows=256000
|
|
ttgo-t-oi-plus.menu.UploadSpeed.256000.upload.speed=256000
|
|
ttgo-t-oi-plus.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
ttgo-t-oi-plus.menu.UploadSpeed.230400=230400
|
|
ttgo-t-oi-plus.menu.UploadSpeed.230400.upload.speed=230400
|
|
ttgo-t-oi-plus.menu.UploadSpeed.460800.linux=460800
|
|
ttgo-t-oi-plus.menu.UploadSpeed.460800.macosx=460800
|
|
ttgo-t-oi-plus.menu.UploadSpeed.460800.upload.speed=460800
|
|
ttgo-t-oi-plus.menu.UploadSpeed.512000.windows=512000
|
|
ttgo-t-oi-plus.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
ttgo-t-oi-plus.menu.DebugLevel.none=None
|
|
ttgo-t-oi-plus.menu.DebugLevel.none.build.code_debug=0
|
|
ttgo-t-oi-plus.menu.DebugLevel.error=Error
|
|
ttgo-t-oi-plus.menu.DebugLevel.error.build.code_debug=1
|
|
ttgo-t-oi-plus.menu.DebugLevel.warn=Warn
|
|
ttgo-t-oi-plus.menu.DebugLevel.warn.build.code_debug=2
|
|
ttgo-t-oi-plus.menu.DebugLevel.info=Info
|
|
ttgo-t-oi-plus.menu.DebugLevel.info.build.code_debug=3
|
|
ttgo-t-oi-plus.menu.DebugLevel.debug=Debug
|
|
ttgo-t-oi-plus.menu.DebugLevel.debug.build.code_debug=4
|
|
ttgo-t-oi-plus.menu.DebugLevel.verbose=Verbose
|
|
ttgo-t-oi-plus.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
ttgo-t-oi-plus.menu.EraseFlash.none=Disabled
|
|
ttgo-t-oi-plus.menu.EraseFlash.none.upload.erase_cmd=
|
|
ttgo-t-oi-plus.menu.EraseFlash.all=Enabled
|
|
ttgo-t-oi-plus.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
cw02.name=XinaBox CW02
|
|
|
|
cw02.bootloader.tool=esptool_py
|
|
cw02.bootloader.tool.default=esptool_py
|
|
|
|
cw02.upload.tool=esptool_py
|
|
cw02.upload.tool.default=esptool_py
|
|
cw02.upload.tool.network=esp_ota
|
|
|
|
cw02.upload.maximum_size=1310720
|
|
cw02.upload.maximum_data_size=294912
|
|
cw02.upload.flags=
|
|
cw02.upload.extra_flags=
|
|
|
|
cw02.serial.disableDTR=true
|
|
cw02.serial.disableRTS=true
|
|
|
|
cw02.build.tarch=xtensa
|
|
cw02.build.bootloader_addr=0x1000
|
|
cw02.build.target=esp32
|
|
cw02.build.mcu=esp32
|
|
cw02.build.core=esp32
|
|
cw02.build.variant=xinabox
|
|
cw02.build.board=ESP32_DEV
|
|
|
|
cw02.build.f_cpu=240000000L
|
|
cw02.build.flash_size=4MB
|
|
cw02.build.flash_freq=40m
|
|
cw02.build.flash_mode=dio
|
|
cw02.build.boot=dio
|
|
cw02.build.partitions=default
|
|
|
|
cw02.menu.FlashMode.qio=QIO
|
|
cw02.menu.FlashMode.qio.build.flash_mode=dio
|
|
cw02.menu.FlashMode.qio.build.boot=qio
|
|
cw02.menu.FlashMode.dio=DIO
|
|
cw02.menu.FlashMode.dio.build.flash_mode=dio
|
|
cw02.menu.FlashMode.dio.build.boot=dio
|
|
|
|
cw02.menu.FlashFreq.80=80MHz
|
|
cw02.menu.FlashFreq.80.build.flash_freq=80m
|
|
cw02.menu.FlashFreq.40=40MHz
|
|
cw02.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
cw02.menu.FlashSize.4M=4MB (32Mb)
|
|
cw02.menu.FlashSize.4M.build.flash_size=4MB
|
|
cw02.menu.FlashSize.2M=2MB (16Mb)
|
|
cw02.menu.FlashSize.2M.build.flash_size=2MB
|
|
cw02.menu.FlashSize.2M.build.partitions=minimal
|
|
|
|
cw02.menu.UploadSpeed.921600=921600
|
|
cw02.menu.UploadSpeed.921600.upload.speed=921600
|
|
cw02.menu.UploadSpeed.115200=115200
|
|
cw02.menu.UploadSpeed.115200.upload.speed=115200
|
|
cw02.menu.UploadSpeed.256000.windows=256000
|
|
cw02.menu.UploadSpeed.256000.upload.speed=256000
|
|
cw02.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
cw02.menu.UploadSpeed.230400=230400
|
|
cw02.menu.UploadSpeed.230400.upload.speed=230400
|
|
cw02.menu.UploadSpeed.460800.linux=460800
|
|
cw02.menu.UploadSpeed.460800.macosx=460800
|
|
cw02.menu.UploadSpeed.460800.upload.speed=460800
|
|
cw02.menu.UploadSpeed.512000.windows=512000
|
|
cw02.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
cw02.menu.DebugLevel.none=None
|
|
cw02.menu.DebugLevel.none.build.code_debug=0
|
|
cw02.menu.DebugLevel.error=Error
|
|
cw02.menu.DebugLevel.error.build.code_debug=1
|
|
cw02.menu.DebugLevel.warn=Warn
|
|
cw02.menu.DebugLevel.warn.build.code_debug=2
|
|
cw02.menu.DebugLevel.info=Info
|
|
cw02.menu.DebugLevel.info.build.code_debug=3
|
|
cw02.menu.DebugLevel.debug=Debug
|
|
cw02.menu.DebugLevel.debug.build.code_debug=4
|
|
cw02.menu.DebugLevel.verbose=Verbose
|
|
cw02.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
cw02.menu.EraseFlash.none=Disabled
|
|
cw02.menu.EraseFlash.none.upload.erase_cmd=
|
|
cw02.menu.EraseFlash.all=Enabled
|
|
cw02.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32thing.name=SparkFun ESP32 Thing
|
|
|
|
esp32thing.bootloader.tool=esptool_py
|
|
esp32thing.bootloader.tool.default=esptool_py
|
|
|
|
esp32thing.upload.tool=esptool_py
|
|
esp32thing.upload.tool.default=esptool_py
|
|
esp32thing.upload.tool.network=esp_ota
|
|
|
|
esp32thing.upload.maximum_size=1310720
|
|
esp32thing.upload.maximum_data_size=327680
|
|
esp32thing.upload.flags=
|
|
esp32thing.upload.extra_flags=
|
|
|
|
esp32thing.serial.disableDTR=true
|
|
esp32thing.serial.disableRTS=true
|
|
|
|
esp32thing.build.tarch=xtensa
|
|
esp32thing.build.bootloader_addr=0x1000
|
|
esp32thing.build.target=esp32
|
|
esp32thing.build.mcu=esp32
|
|
esp32thing.build.core=esp32
|
|
esp32thing.build.variant=esp32thing
|
|
esp32thing.build.board=ESP32_THING
|
|
|
|
esp32thing.build.f_cpu=240000000L
|
|
esp32thing.build.flash_mode=dio
|
|
esp32thing.build.flash_size=4MB
|
|
esp32thing.build.boot=dio
|
|
esp32thing.build.partitions=default
|
|
esp32thing.build.defines=
|
|
|
|
esp32thing.menu.FlashFreq.80=80MHz
|
|
esp32thing.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32thing.menu.FlashFreq.40=40MHz
|
|
esp32thing.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32thing.menu.PartitionScheme.default=Default
|
|
esp32thing.menu.PartitionScheme.default.build.partitions=default
|
|
esp32thing.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
esp32thing.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32thing.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32thing.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
esp32thing.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32thing.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
esp32thing.menu.UploadSpeed.921600=921600
|
|
esp32thing.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32thing.menu.UploadSpeed.115200=115200
|
|
esp32thing.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32thing.menu.UploadSpeed.256000.windows=256000
|
|
esp32thing.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32thing.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32thing.menu.UploadSpeed.230400=230400
|
|
esp32thing.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32thing.menu.UploadSpeed.460800.linux=460800
|
|
esp32thing.menu.UploadSpeed.460800.macosx=460800
|
|
esp32thing.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32thing.menu.UploadSpeed.512000.windows=512000
|
|
esp32thing.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32thing.menu.DebugLevel.none=None
|
|
esp32thing.menu.DebugLevel.none.build.code_debug=0
|
|
esp32thing.menu.DebugLevel.error=Error
|
|
esp32thing.menu.DebugLevel.error.build.code_debug=1
|
|
esp32thing.menu.DebugLevel.warn=Warn
|
|
esp32thing.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32thing.menu.DebugLevel.info=Info
|
|
esp32thing.menu.DebugLevel.info.build.code_debug=3
|
|
esp32thing.menu.DebugLevel.debug=Debug
|
|
esp32thing.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32thing.menu.DebugLevel.verbose=Verbose
|
|
esp32thing.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32thing.menu.EraseFlash.none=Disabled
|
|
esp32thing.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32thing.menu.EraseFlash.all=Enabled
|
|
esp32thing.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32thing_plus.name=SparkFun ESP32 Thing Plus
|
|
|
|
esp32thing_plus.bootloader.tool=esptool_py
|
|
esp32thing_plus.bootloader.tool.default=esptool_py
|
|
|
|
esp32thing_plus.upload.tool=esptool_py
|
|
esp32thing_plus.upload.tool.default=esptool_py
|
|
esp32thing_plus.upload.tool.network=esp_ota
|
|
|
|
esp32thing_plus.upload.maximum_size=1310720
|
|
esp32thing_plus.upload.maximum_data_size=327680
|
|
esp32thing_plus.upload.wait_for_upload_port=true
|
|
esp32thing_plus.upload.flags=
|
|
esp32thing_plus.upload.extra_flags=
|
|
|
|
esp32thing_plus.serial.disableDTR=true
|
|
esp32thing_plus.serial.disableRTS=true
|
|
|
|
esp32thing_plus.build.tarch=xtensa
|
|
esp32thing_plus.build.bootloader_addr=0x1000
|
|
esp32thing_plus.build.target=esp32
|
|
esp32thing_plus.build.mcu=esp32
|
|
esp32thing_plus.build.core=esp32
|
|
esp32thing_plus.build.variant=esp32thing_plus
|
|
esp32thing_plus.build.board=ESP32_THING_PLUS
|
|
|
|
esp32thing_plus.build.f_cpu=240000000L
|
|
esp32thing_plus.build.flash_mode=dio
|
|
esp32thing_plus.build.flash_size=16MB
|
|
esp32thing_plus.build.boot=dio
|
|
esp32thing_plus.build.partitions=default
|
|
esp32thing_plus.build.defines=
|
|
|
|
esp32thing_plus.menu.FlashFreq.80=80MHz
|
|
esp32thing_plus.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32thing_plus.menu.FlashFreq.40=40MHz
|
|
esp32thing_plus.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32thing_plus.menu.PartitionScheme.default=Default (6.25MB APP/OTA/3.43MB SPIFFS)
|
|
esp32thing_plus.menu.PartitionScheme.default.build.partitions=default_16MB
|
|
esp32thing_plus.menu.PartitionScheme.default.upload.maximum_size=6553600
|
|
esp32thing_plus.menu.PartitionScheme.large_spiffs=Large SPIFFS (4.5MB APP/OTA/6.93MB SPIFFS)
|
|
esp32thing_plus.menu.PartitionScheme.large_spiffs.build.partitions=large_spiffs_16MB
|
|
esp32thing_plus.menu.PartitionScheme.large_spiffs.upload.maximum_size=4718592
|
|
|
|
esp32thing_plus.menu.UploadSpeed.921600=921600
|
|
esp32thing_plus.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32thing_plus.menu.UploadSpeed.115200=115200
|
|
esp32thing_plus.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32thing_plus.menu.UploadSpeed.256000.windows=256000
|
|
esp32thing_plus.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32thing_plus.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32thing_plus.menu.UploadSpeed.230400=230400
|
|
esp32thing_plus.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32thing_plus.menu.UploadSpeed.460800.linux=460800
|
|
esp32thing_plus.menu.UploadSpeed.460800.macosx=460800
|
|
esp32thing_plus.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32thing_plus.menu.UploadSpeed.512000.windows=512000
|
|
esp32thing_plus.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32thing_plus.menu.DebugLevel.none=None
|
|
esp32thing_plus.menu.DebugLevel.none.build.code_debug=0
|
|
esp32thing_plus.menu.DebugLevel.error=Error
|
|
esp32thing_plus.menu.DebugLevel.error.build.code_debug=1
|
|
esp32thing_plus.menu.DebugLevel.warn=Warn
|
|
esp32thing_plus.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32thing_plus.menu.DebugLevel.info=Info
|
|
esp32thing_plus.menu.DebugLevel.info.build.code_debug=3
|
|
esp32thing_plus.menu.DebugLevel.debug=Debug
|
|
esp32thing_plus.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32thing_plus.menu.DebugLevel.verbose=Verbose
|
|
esp32thing_plus.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32thing_plus.menu.EraseFlash.none=Disabled
|
|
esp32thing_plus.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32thing_plus.menu.EraseFlash.all=Enabled
|
|
esp32thing_plus.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32thing_plus_c.name=SparkFun ESP32 Thing Plus C
|
|
|
|
esp32thing_plus_c.bootloader.tool=esptool_py
|
|
esp32thing_plus_c.bootloader.tool.default=esptool_py
|
|
|
|
esp32thing_plus_c.upload.tool=esptool_py
|
|
esp32thing_plus_c.upload.tool.default=esptool_py
|
|
esp32thing_plus_c.upload.tool.network=esp_ota
|
|
|
|
esp32thing_plus_c.upload.maximum_size=1310720
|
|
esp32thing_plus_c.upload.maximum_data_size=327680
|
|
esp32thing_plus_c.upload.wait_for_upload_port=true
|
|
esp32thing_plus_c.upload.flags=
|
|
esp32thing_plus_c.upload.extra_flags=
|
|
|
|
esp32thing_plus_c.serial.disableDTR=true
|
|
esp32thing_plus_c.serial.disableRTS=true
|
|
|
|
esp32thing_plus_c.build.tarch=xtensa
|
|
esp32thing_plus_c.build.bootloader_addr=0x1000
|
|
esp32thing_plus_c.build.target=esp32
|
|
esp32thing_plus_c.build.mcu=esp32
|
|
esp32thing_plus_c.build.core=esp32
|
|
esp32thing_plus_c.build.variant=esp32thing_plus_c
|
|
esp32thing_plus_c.build.board=ESP32_THING_PLUS_C
|
|
|
|
esp32thing_plus_c.build.f_cpu=240000000L
|
|
esp32thing_plus_c.build.flash_mode=dio
|
|
esp32thing_plus_c.build.flash_size=16MB
|
|
esp32thing_plus_c.build.boot=dio
|
|
esp32thing_plus_c.build.partitions=default
|
|
esp32thing_plus_c.build.defines=
|
|
|
|
esp32thing_plus_c.menu.FlashFreq.80=80MHz
|
|
esp32thing_plus_c.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32thing_plus_c.menu.FlashFreq.40=40MHz
|
|
esp32thing_plus_c.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32thing_plus_c.menu.PartitionScheme.default=Default (6.25MB APP/OTA/3.43MB SPIFFS)
|
|
esp32thing_plus_c.menu.PartitionScheme.default.build.partitions=default_16MB
|
|
esp32thing_plus_c.menu.PartitionScheme.default.upload.maximum_size=6553600
|
|
esp32thing_plus_c.menu.PartitionScheme.large_spiffs=Large SPIFFS (4.5MB APP/OTA/6.93MB SPIFFS)
|
|
esp32thing_plus_c.menu.PartitionScheme.large_spiffs.build.partitions=large_spiffs_16MB
|
|
esp32thing_plus_c.menu.PartitionScheme.large_spiffs.upload.maximum_size=4718592
|
|
|
|
esp32thing_plus_c.menu.UploadSpeed.921600=921600
|
|
esp32thing_plus_c.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32thing_plus_c.menu.UploadSpeed.115200=115200
|
|
esp32thing_plus_c.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32thing_plus_c.menu.UploadSpeed.256000.windows=256000
|
|
esp32thing_plus_c.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32thing_plus_c.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32thing_plus_c.menu.UploadSpeed.230400=230400
|
|
esp32thing_plus_c.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32thing_plus_c.menu.UploadSpeed.460800.linux=460800
|
|
esp32thing_plus_c.menu.UploadSpeed.460800.macosx=460800
|
|
esp32thing_plus_c.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32thing_plus_c.menu.UploadSpeed.512000.windows=512000
|
|
esp32thing_plus_c.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32thing_plus_c.menu.DebugLevel.none=None
|
|
esp32thing_plus_c.menu.DebugLevel.none.build.code_debug=0
|
|
esp32thing_plus_c.menu.DebugLevel.error=Error
|
|
esp32thing_plus_c.menu.DebugLevel.error.build.code_debug=1
|
|
esp32thing_plus_c.menu.DebugLevel.warn=Warn
|
|
esp32thing_plus_c.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32thing_plus_c.menu.DebugLevel.info=Info
|
|
esp32thing_plus_c.menu.DebugLevel.info.build.code_debug=3
|
|
esp32thing_plus_c.menu.DebugLevel.debug=Debug
|
|
esp32thing_plus_c.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32thing_plus_c.menu.DebugLevel.verbose=Verbose
|
|
esp32thing_plus_c.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32thing_plus_c.menu.EraseFlash.none=Disabled
|
|
esp32thing_plus_c.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32thing_plus_c.menu.EraseFlash.all=Enabled
|
|
esp32thing_plus_c.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
sparkfun_esp32s2_thing_plus.name=SparkFun ESP32-S2 Thing Plus
|
|
sparkfun_esp32s2_thing_plus.vid.0=0x1B4F
|
|
sparkfun_esp32s2_thing_plus.pid.0=0x0027
|
|
|
|
sparkfun_esp32s2_thing_plus.bootloader.tool=esptool_py
|
|
sparkfun_esp32s2_thing_plus.bootloader.tool.default=esptool_py
|
|
|
|
sparkfun_esp32s2_thing_plus.upload.tool=esptool_py
|
|
sparkfun_esp32s2_thing_plus.upload.tool.default=esptool_py
|
|
sparkfun_esp32s2_thing_plus.upload.tool.network=esp_ota
|
|
|
|
sparkfun_esp32s2_thing_plus.upload.maximum_size=1310720
|
|
sparkfun_esp32s2_thing_plus.upload.maximum_data_size=327680
|
|
sparkfun_esp32s2_thing_plus.upload.flags=
|
|
sparkfun_esp32s2_thing_plus.upload.extra_flags=
|
|
sparkfun_esp32s2_thing_plus.upload.use_1200bps_touch=true
|
|
sparkfun_esp32s2_thing_plus.upload.wait_for_upload_port=true
|
|
|
|
sparkfun_esp32s2_thing_plus.serial.disableDTR=false
|
|
sparkfun_esp32s2_thing_plus.serial.disableRTS=false
|
|
|
|
sparkfun_esp32s2_thing_plus.build.tarch=xtensa
|
|
sparkfun_esp32s2_thing_plus.build.bootloader_addr=0x1000
|
|
sparkfun_esp32s2_thing_plus.build.target=esp32s2
|
|
sparkfun_esp32s2_thing_plus.build.mcu=esp32s2
|
|
sparkfun_esp32s2_thing_plus.build.core=esp32
|
|
sparkfun_esp32s2_thing_plus.build.variant=esp32s2thing_plus
|
|
sparkfun_esp32s2_thing_plus.build.board=ESP32S2_THING_PLUS
|
|
|
|
sparkfun_esp32s2_thing_plus.build.cdc_on_boot=0
|
|
sparkfun_esp32s2_thing_plus.build.msc_on_boot=0
|
|
sparkfun_esp32s2_thing_plus.build.dfu_on_boot=0
|
|
sparkfun_esp32s2_thing_plus.build.f_cpu=240000000L
|
|
sparkfun_esp32s2_thing_plus.build.flash_size=4MB
|
|
sparkfun_esp32s2_thing_plus.build.flash_freq=80m
|
|
sparkfun_esp32s2_thing_plus.build.flash_mode=qio
|
|
sparkfun_esp32s2_thing_plus.build.boot=qio
|
|
sparkfun_esp32s2_thing_plus.build.partitions=default
|
|
sparkfun_esp32s2_thing_plus.build.defines=
|
|
|
|
sparkfun_esp32s2_thing_plus.menu.CDCOnBoot.default=Disabled
|
|
sparkfun_esp32s2_thing_plus.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
sparkfun_esp32s2_thing_plus.menu.CDCOnBoot.cdc=Enabled
|
|
sparkfun_esp32s2_thing_plus.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
sparkfun_esp32s2_thing_plus.menu.MSCOnBoot.default=Disabled
|
|
sparkfun_esp32s2_thing_plus.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
sparkfun_esp32s2_thing_plus.menu.MSCOnBoot.msc=Enabled
|
|
sparkfun_esp32s2_thing_plus.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
sparkfun_esp32s2_thing_plus.menu.DFUOnBoot.default=Disabled
|
|
sparkfun_esp32s2_thing_plus.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
sparkfun_esp32s2_thing_plus.menu.DFUOnBoot.dfu=Enabled
|
|
sparkfun_esp32s2_thing_plus.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
sparkfun_esp32s2_thing_plus.menu.PSRAM.disabled=Disabled
|
|
sparkfun_esp32s2_thing_plus.menu.PSRAM.disabled.build.defines=
|
|
sparkfun_esp32s2_thing_plus.menu.PSRAM.enabled=Enabled
|
|
sparkfun_esp32s2_thing_plus.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.default.build.partitions=default
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
sparkfun_esp32s2_thing_plus.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
|
|
sparkfun_esp32s2_thing_plus.menu.CPUFreq.240=240MHz (WiFi)
|
|
sparkfun_esp32s2_thing_plus.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
sparkfun_esp32s2_thing_plus.menu.CPUFreq.160=160MHz (WiFi)
|
|
sparkfun_esp32s2_thing_plus.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
sparkfun_esp32s2_thing_plus.menu.CPUFreq.80=80MHz (WiFi)
|
|
sparkfun_esp32s2_thing_plus.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
sparkfun_esp32s2_thing_plus.menu.CPUFreq.40=40MHz
|
|
sparkfun_esp32s2_thing_plus.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
sparkfun_esp32s2_thing_plus.menu.CPUFreq.20=20MHz
|
|
sparkfun_esp32s2_thing_plus.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
sparkfun_esp32s2_thing_plus.menu.CPUFreq.10=10MHz
|
|
sparkfun_esp32s2_thing_plus.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
sparkfun_esp32s2_thing_plus.menu.FlashMode.qio=QIO
|
|
sparkfun_esp32s2_thing_plus.menu.FlashMode.qio.build.flash_mode=dio
|
|
sparkfun_esp32s2_thing_plus.menu.FlashMode.qio.build.boot=qio
|
|
sparkfun_esp32s2_thing_plus.menu.FlashMode.dio=DIO
|
|
sparkfun_esp32s2_thing_plus.menu.FlashMode.dio.build.flash_mode=dio
|
|
sparkfun_esp32s2_thing_plus.menu.FlashMode.dio.build.boot=dio
|
|
|
|
sparkfun_esp32s2_thing_plus.menu.FlashFreq.80=80MHz
|
|
sparkfun_esp32s2_thing_plus.menu.FlashFreq.80.build.flash_freq=80m
|
|
sparkfun_esp32s2_thing_plus.menu.FlashFreq.40=40MHz
|
|
sparkfun_esp32s2_thing_plus.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
sparkfun_esp32s2_thing_plus.menu.FlashSize.4M=4MB (32Mb)
|
|
sparkfun_esp32s2_thing_plus.menu.FlashSize.4M.build.flash_size=4MB
|
|
sparkfun_esp32s2_thing_plus.menu.FlashSize.8M=8MB (64Mb)
|
|
sparkfun_esp32s2_thing_plus.menu.FlashSize.8M.build.flash_size=8MB
|
|
sparkfun_esp32s2_thing_plus.menu.FlashSize.8M.build.partitions=default_8MB
|
|
sparkfun_esp32s2_thing_plus.menu.FlashSize.2M=2MB (16Mb)
|
|
sparkfun_esp32s2_thing_plus.menu.FlashSize.2M.build.flash_size=2MB
|
|
sparkfun_esp32s2_thing_plus.menu.FlashSize.2M.build.partitions=minimal
|
|
sparkfun_esp32s2_thing_plus.menu.FlashSize.16M=16MB (128Mb)
|
|
sparkfun_esp32s2_thing_plus.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
sparkfun_esp32s2_thing_plus.menu.UploadSpeed.921600=921600
|
|
sparkfun_esp32s2_thing_plus.menu.UploadSpeed.921600.upload.speed=921600
|
|
sparkfun_esp32s2_thing_plus.menu.UploadSpeed.115200=115200
|
|
sparkfun_esp32s2_thing_plus.menu.UploadSpeed.115200.upload.speed=115200
|
|
sparkfun_esp32s2_thing_plus.menu.UploadSpeed.256000.windows=256000
|
|
sparkfun_esp32s2_thing_plus.menu.UploadSpeed.256000.upload.speed=256000
|
|
sparkfun_esp32s2_thing_plus.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
sparkfun_esp32s2_thing_plus.menu.UploadSpeed.230400=230400
|
|
sparkfun_esp32s2_thing_plus.menu.UploadSpeed.230400.upload.speed=230400
|
|
sparkfun_esp32s2_thing_plus.menu.UploadSpeed.460800.linux=460800
|
|
sparkfun_esp32s2_thing_plus.menu.UploadSpeed.460800.macosx=460800
|
|
sparkfun_esp32s2_thing_plus.menu.UploadSpeed.460800.upload.speed=460800
|
|
sparkfun_esp32s2_thing_plus.menu.UploadSpeed.512000.windows=512000
|
|
sparkfun_esp32s2_thing_plus.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
sparkfun_esp32s2_thing_plus.menu.DebugLevel.none=None
|
|
sparkfun_esp32s2_thing_plus.menu.DebugLevel.none.build.code_debug=0
|
|
sparkfun_esp32s2_thing_plus.menu.DebugLevel.error=Error
|
|
sparkfun_esp32s2_thing_plus.menu.DebugLevel.error.build.code_debug=1
|
|
sparkfun_esp32s2_thing_plus.menu.DebugLevel.warn=Warn
|
|
sparkfun_esp32s2_thing_plus.menu.DebugLevel.warn.build.code_debug=2
|
|
sparkfun_esp32s2_thing_plus.menu.DebugLevel.info=Info
|
|
sparkfun_esp32s2_thing_plus.menu.DebugLevel.info.build.code_debug=3
|
|
sparkfun_esp32s2_thing_plus.menu.DebugLevel.debug=Debug
|
|
sparkfun_esp32s2_thing_plus.menu.DebugLevel.debug.build.code_debug=4
|
|
sparkfun_esp32s2_thing_plus.menu.DebugLevel.verbose=Verbose
|
|
sparkfun_esp32s2_thing_plus.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
sparkfun_esp32s2_thing_plus.menu.EraseFlash.none=Disabled
|
|
sparkfun_esp32s2_thing_plus.menu.EraseFlash.none.upload.erase_cmd=
|
|
sparkfun_esp32s2_thing_plus.menu.EraseFlash.all=Enabled
|
|
sparkfun_esp32s2_thing_plus.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
sparkfun_esp32c6_thing_plus.name=SparkFun ESP32-C6 Thing Plus
|
|
|
|
sparkfun_esp32c6_thing_plus.bootloader.tool=esptool_py
|
|
sparkfun_esp32c6_thing_plus.bootloader.tool.default=esptool_py
|
|
|
|
sparkfun_esp32c6_thing_plus.upload.tool=esptool_py
|
|
sparkfun_esp32c6_thing_plus.upload.tool.default=esptool_py
|
|
sparkfun_esp32c6_thing_plus.upload.tool.network=esp_ota
|
|
|
|
sparkfun_esp32c6_thing_plus.upload.maximum_size=1310720
|
|
sparkfun_esp32c6_thing_plus.upload.maximum_data_size=327680
|
|
sparkfun_esp32c6_thing_plus.upload.flags=
|
|
sparkfun_esp32c6_thing_plus.upload.extra_flags=
|
|
sparkfun_esp32c6_thing_plus.upload.use_1200bps_touch=false
|
|
sparkfun_esp32c6_thing_plus.upload.wait_for_upload_port=false
|
|
|
|
sparkfun_esp32c6_thing_plus.serial.disableDTR=false
|
|
sparkfun_esp32c6_thing_plus.serial.disableRTS=false
|
|
|
|
sparkfun_esp32c6_thing_plus.build.tarch=riscv32
|
|
sparkfun_esp32c6_thing_plus.build.target=esp
|
|
sparkfun_esp32c6_thing_plus.build.mcu=esp32c6
|
|
sparkfun_esp32c6_thing_plus.build.core=esp32
|
|
sparkfun_esp32c6_thing_plus.build.variant=sparkfun_esp32c6_thing_plus
|
|
sparkfun_esp32c6_thing_plus.build.board=ESP32C6_THING_PLUS
|
|
sparkfun_esp32c6_thing_plus.build.bootloader_addr=0x0
|
|
|
|
sparkfun_esp32c6_thing_plus.build.cdc_on_boot=0
|
|
sparkfun_esp32c6_thing_plus.build.f_cpu=160000000L
|
|
sparkfun_esp32c6_thing_plus.build.flash_size=4MB
|
|
sparkfun_esp32c6_thing_plus.build.flash_freq=80m
|
|
sparkfun_esp32c6_thing_plus.build.flash_mode=qio
|
|
sparkfun_esp32c6_thing_plus.build.boot=qio
|
|
sparkfun_esp32c6_thing_plus.build.partitions=default
|
|
sparkfun_esp32c6_thing_plus.build.defines=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
sparkfun_esp32c6_thing_plus.menu.JTAGAdapter.default=Disabled
|
|
sparkfun_esp32c6_thing_plus.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
sparkfun_esp32c6_thing_plus.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
sparkfun_esp32c6_thing_plus.menu.JTAGAdapter.builtin.build.openocdscript=esp32c6-builtin.cfg
|
|
sparkfun_esp32c6_thing_plus.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
sparkfun_esp32c6_thing_plus.menu.JTAGAdapter.external=FTDI Adapter
|
|
sparkfun_esp32c6_thing_plus.menu.JTAGAdapter.external.build.openocdscript=esp32c6-ftdi.cfg
|
|
sparkfun_esp32c6_thing_plus.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
sparkfun_esp32c6_thing_plus.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
sparkfun_esp32c6_thing_plus.menu.JTAGAdapter.bridge.build.openocdscript=esp32c6-bridge.cfg
|
|
sparkfun_esp32c6_thing_plus.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
sparkfun_esp32c6_thing_plus.menu.CDCOnBoot.default=Enabled
|
|
sparkfun_esp32c6_thing_plus.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
sparkfun_esp32c6_thing_plus.menu.CDCOnBoot.cdc=Disabled
|
|
sparkfun_esp32c6_thing_plus.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
|
|
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.default.build.partitions=default
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.zigbee=Zigbee 4MB with spiffs
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.zigbee.build.partitions=zigbee
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.zigbee.upload.maximum_size=1310720
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.custom=Custom
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.custom.build.partitions=
|
|
sparkfun_esp32c6_thing_plus.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
sparkfun_esp32c6_thing_plus.menu.CPUFreq.160=160MHz (WiFi)
|
|
sparkfun_esp32c6_thing_plus.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
sparkfun_esp32c6_thing_plus.menu.CPUFreq.80=80MHz (WiFi)
|
|
sparkfun_esp32c6_thing_plus.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
sparkfun_esp32c6_thing_plus.menu.CPUFreq.40=40MHz
|
|
sparkfun_esp32c6_thing_plus.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
sparkfun_esp32c6_thing_plus.menu.CPUFreq.20=20MHz
|
|
sparkfun_esp32c6_thing_plus.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
sparkfun_esp32c6_thing_plus.menu.CPUFreq.10=10MHz
|
|
sparkfun_esp32c6_thing_plus.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
sparkfun_esp32c6_thing_plus.menu.FlashMode.qio=QIO
|
|
sparkfun_esp32c6_thing_plus.menu.FlashMode.qio.build.flash_mode=dio
|
|
sparkfun_esp32c6_thing_plus.menu.FlashMode.qio.build.boot=qio
|
|
sparkfun_esp32c6_thing_plus.menu.FlashMode.dio=DIO
|
|
sparkfun_esp32c6_thing_plus.menu.FlashMode.dio.build.flash_mode=dio
|
|
sparkfun_esp32c6_thing_plus.menu.FlashMode.dio.build.boot=dio
|
|
|
|
sparkfun_esp32c6_thing_plus.menu.FlashFreq.80=80MHz
|
|
sparkfun_esp32c6_thing_plus.menu.FlashFreq.80.build.flash_freq=80m
|
|
sparkfun_esp32c6_thing_plus.menu.FlashFreq.40=40MHz
|
|
sparkfun_esp32c6_thing_plus.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
sparkfun_esp32c6_thing_plus.menu.FlashSize.4M=4MB (32Mb)
|
|
sparkfun_esp32c6_thing_plus.menu.FlashSize.4M.build.flash_size=4MB
|
|
sparkfun_esp32c6_thing_plus.menu.FlashSize.8M=8MB (64Mb)
|
|
sparkfun_esp32c6_thing_plus.menu.FlashSize.8M.build.flash_size=8MB
|
|
sparkfun_esp32c6_thing_plus.menu.FlashSize.8M.build.partitions=default_8MB
|
|
sparkfun_esp32c6_thing_plus.menu.FlashSize.2M=2MB (16Mb)
|
|
sparkfun_esp32c6_thing_plus.menu.FlashSize.2M.build.flash_size=2MB
|
|
sparkfun_esp32c6_thing_plus.menu.FlashSize.2M.build.partitions=minimal
|
|
sparkfun_esp32c6_thing_plus.menu.FlashSize.16M=16MB (128Mb)
|
|
sparkfun_esp32c6_thing_plus.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
sparkfun_esp32c6_thing_plus.menu.UploadSpeed.921600=921600
|
|
sparkfun_esp32c6_thing_plus.menu.UploadSpeed.921600.upload.speed=921600
|
|
sparkfun_esp32c6_thing_plus.menu.UploadSpeed.115200=115200
|
|
sparkfun_esp32c6_thing_plus.menu.UploadSpeed.115200.upload.speed=115200
|
|
sparkfun_esp32c6_thing_plus.menu.UploadSpeed.256000.windows=256000
|
|
sparkfun_esp32c6_thing_plus.menu.UploadSpeed.256000.upload.speed=256000
|
|
sparkfun_esp32c6_thing_plus.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
sparkfun_esp32c6_thing_plus.menu.UploadSpeed.230400=230400
|
|
sparkfun_esp32c6_thing_plus.menu.UploadSpeed.230400.upload.speed=230400
|
|
sparkfun_esp32c6_thing_plus.menu.UploadSpeed.460800.linux=460800
|
|
sparkfun_esp32c6_thing_plus.menu.UploadSpeed.460800.macosx=460800
|
|
sparkfun_esp32c6_thing_plus.menu.UploadSpeed.460800.upload.speed=460800
|
|
sparkfun_esp32c6_thing_plus.menu.UploadSpeed.512000.windows=512000
|
|
sparkfun_esp32c6_thing_plus.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
sparkfun_esp32c6_thing_plus.menu.DebugLevel.none=None
|
|
sparkfun_esp32c6_thing_plus.menu.DebugLevel.none.build.code_debug=0
|
|
sparkfun_esp32c6_thing_plus.menu.DebugLevel.error=Error
|
|
sparkfun_esp32c6_thing_plus.menu.DebugLevel.error.build.code_debug=1
|
|
sparkfun_esp32c6_thing_plus.menu.DebugLevel.warn=Warn
|
|
sparkfun_esp32c6_thing_plus.menu.DebugLevel.warn.build.code_debug=2
|
|
sparkfun_esp32c6_thing_plus.menu.DebugLevel.info=Info
|
|
sparkfun_esp32c6_thing_plus.menu.DebugLevel.info.build.code_debug=3
|
|
sparkfun_esp32c6_thing_plus.menu.DebugLevel.debug=Debug
|
|
sparkfun_esp32c6_thing_plus.menu.DebugLevel.debug.build.code_debug=4
|
|
sparkfun_esp32c6_thing_plus.menu.DebugLevel.verbose=Verbose
|
|
sparkfun_esp32c6_thing_plus.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
sparkfun_esp32c6_thing_plus.menu.EraseFlash.none=Disabled
|
|
sparkfun_esp32c6_thing_plus.menu.EraseFlash.none.upload.erase_cmd=
|
|
sparkfun_esp32c6_thing_plus.menu.EraseFlash.all=Enabled
|
|
sparkfun_esp32c6_thing_plus.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.default=Disabled
|
|
sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.ed=Zigbee ED (end device)
|
|
sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
|
|
sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
|
|
sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
|
|
sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
|
|
sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
esp32micromod.name=SparkFun ESP32 MicroMod
|
|
|
|
esp32micromod.bootloader.tool=esptool_py
|
|
esp32micromod.bootloader.tool.default=esptool_py
|
|
|
|
esp32micromod.upload.tool=esptool_py
|
|
esp32micromod.upload.tool.default=esptool_py
|
|
esp32micromod.upload.tool.network=esp_ota
|
|
|
|
esp32micromod.upload.maximum_size=1310720
|
|
esp32micromod.upload.maximum_data_size=327680
|
|
esp32micromod.upload.wait_for_upload_port=true
|
|
esp32micromod.upload.flags=
|
|
esp32micromod.upload.extra_flags=
|
|
|
|
esp32micromod.serial.disableDTR=true
|
|
esp32micromod.serial.disableRTS=true
|
|
|
|
esp32micromod.build.tarch=xtensa
|
|
esp32micromod.build.bootloader_addr=0x1000
|
|
esp32micromod.build.target=esp32
|
|
esp32micromod.build.mcu=esp32
|
|
esp32micromod.build.core=esp32
|
|
esp32micromod.build.variant=esp32micromod
|
|
esp32micromod.build.board=ESP32_MICROMOD
|
|
|
|
esp32micromod.build.f_cpu=240000000L
|
|
esp32micromod.build.flash_size=4MB
|
|
esp32micromod.build.flash_freq=40m
|
|
esp32micromod.build.flash_mode=dio
|
|
esp32micromod.build.boot=dio
|
|
esp32micromod.build.partitions=default
|
|
esp32micromod.build.defines=
|
|
|
|
esp32micromod.menu.PSRAM.disabled=Disabled
|
|
esp32micromod.menu.PSRAM.disabled.build.defines=
|
|
esp32micromod.menu.PSRAM.enabled=Enabled
|
|
esp32micromod.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
|
|
|
|
esp32micromod.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32micromod.menu.PartitionScheme.default.build.partitions=default
|
|
esp32micromod.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32micromod.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32micromod.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32micromod.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32micromod.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32micromod.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32micromod.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32micromod.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32micromod.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32micromod.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32micromod.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32micromod.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32micromod.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32micromod.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32micromod.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32micromod.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32micromod.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32micromod.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32micromod.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32micromod.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32micromod.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32micromod.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32micromod.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32micromod.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32micromod.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32micromod.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32micromod.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32micromod.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32micromod.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32micromod.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32micromod.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
|
|
esp32micromod.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
esp32micromod.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
esp32micromod.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
esp32micromod.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32micromod.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
esp32micromod.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32micromod.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
esp32micromod.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32micromod.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
esp32micromod.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
esp32micromod.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
esp32micromod.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32micromod.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
esp32micromod.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
esp32micromod.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
esp32micromod.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32micromod.menu.FlashMode.qio=QIO
|
|
esp32micromod.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32micromod.menu.FlashMode.qio.build.boot=qio
|
|
esp32micromod.menu.FlashMode.dio=DIO
|
|
esp32micromod.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32micromod.menu.FlashMode.dio.build.boot=dio
|
|
|
|
esp32micromod.menu.FlashFreq.80=80MHz
|
|
esp32micromod.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32micromod.menu.FlashFreq.40=40MHz
|
|
esp32micromod.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32micromod.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32micromod.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32micromod.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32micromod.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32micromod.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32micromod.menu.FlashSize.2M=2MB (16Mb)
|
|
esp32micromod.menu.FlashSize.2M.build.flash_size=2MB
|
|
esp32micromod.menu.FlashSize.2M.build.partitions=minimal
|
|
esp32micromod.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32micromod.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
esp32micromod.menu.UploadSpeed.921600=921600
|
|
esp32micromod.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32micromod.menu.UploadSpeed.115200=115200
|
|
esp32micromod.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32micromod.menu.UploadSpeed.256000.windows=256000
|
|
esp32micromod.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32micromod.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32micromod.menu.UploadSpeed.230400=230400
|
|
esp32micromod.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32micromod.menu.UploadSpeed.460800.linux=460800
|
|
esp32micromod.menu.UploadSpeed.460800.macosx=460800
|
|
esp32micromod.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32micromod.menu.UploadSpeed.512000.windows=512000
|
|
esp32micromod.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32micromod.menu.DebugLevel.none=None
|
|
esp32micromod.menu.DebugLevel.none.build.code_debug=0
|
|
esp32micromod.menu.DebugLevel.error=Error
|
|
esp32micromod.menu.DebugLevel.error.build.code_debug=1
|
|
esp32micromod.menu.DebugLevel.warn=Warn
|
|
esp32micromod.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32micromod.menu.DebugLevel.info=Info
|
|
esp32micromod.menu.DebugLevel.info.build.code_debug=3
|
|
esp32micromod.menu.DebugLevel.debug=Debug
|
|
esp32micromod.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32micromod.menu.DebugLevel.verbose=Verbose
|
|
esp32micromod.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32micromod.menu.EraseFlash.none=Disabled
|
|
esp32micromod.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32micromod.menu.EraseFlash.all=Enabled
|
|
esp32micromod.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
sparkfun_lora_gateway_1-channel.name=SparkFun LoRa Gateway 1-Channel
|
|
|
|
sparkfun_lora_gateway_1-channel.bootloader.tool=esptool_py
|
|
sparkfun_lora_gateway_1-channel.bootloader.tool.default=esptool_py
|
|
|
|
sparkfun_lora_gateway_1-channel.upload.tool=esptool_py
|
|
sparkfun_lora_gateway_1-channel.upload.tool.default=esptool_py
|
|
sparkfun_lora_gateway_1-channel.upload.tool.network=esp_ota
|
|
|
|
sparkfun_lora_gateway_1-channel.upload.maximum_size=1310720
|
|
sparkfun_lora_gateway_1-channel.upload.maximum_data_size=294912
|
|
sparkfun_lora_gateway_1-channel.upload.flags=
|
|
sparkfun_lora_gateway_1-channel.upload.extra_flags=
|
|
|
|
sparkfun_lora_gateway_1-channel.serial.disableDTR=true
|
|
sparkfun_lora_gateway_1-channel.serial.disableRTS=true
|
|
|
|
sparkfun_lora_gateway_1-channel.build.tarch=xtensa
|
|
sparkfun_lora_gateway_1-channel.build.bootloader_addr=0x1000
|
|
sparkfun_lora_gateway_1-channel.build.target=esp32
|
|
sparkfun_lora_gateway_1-channel.build.mcu=esp32
|
|
sparkfun_lora_gateway_1-channel.build.core=esp32
|
|
sparkfun_lora_gateway_1-channel.build.variant=sparkfun_lora_gateway_1-channel
|
|
sparkfun_lora_gateway_1-channel.build.board=ESP32_DEV
|
|
|
|
sparkfun_lora_gateway_1-channel.build.f_cpu=240000000L
|
|
sparkfun_lora_gateway_1-channel.build.flash_size=4MB
|
|
sparkfun_lora_gateway_1-channel.build.flash_freq=40m
|
|
sparkfun_lora_gateway_1-channel.build.flash_mode=dio
|
|
sparkfun_lora_gateway_1-channel.build.boot=dio
|
|
sparkfun_lora_gateway_1-channel.build.partitions=default
|
|
|
|
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.default=Default
|
|
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.default.build.partitions=default
|
|
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
|
|
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
sparkfun_lora_gateway_1-channel.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
sparkfun_lora_gateway_1-channel.menu.FlashMode.qio=QIO
|
|
sparkfun_lora_gateway_1-channel.menu.FlashMode.qio.build.flash_mode=dio
|
|
sparkfun_lora_gateway_1-channel.menu.FlashMode.qio.build.boot=qio
|
|
sparkfun_lora_gateway_1-channel.menu.FlashMode.dio=DIO
|
|
sparkfun_lora_gateway_1-channel.menu.FlashMode.dio.build.flash_mode=dio
|
|
sparkfun_lora_gateway_1-channel.menu.FlashMode.dio.build.boot=dio
|
|
|
|
sparkfun_lora_gateway_1-channel.menu.FlashFreq.80=80MHz
|
|
sparkfun_lora_gateway_1-channel.menu.FlashFreq.80.build.flash_freq=80m
|
|
sparkfun_lora_gateway_1-channel.menu.FlashFreq.40=40MHz
|
|
sparkfun_lora_gateway_1-channel.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
sparkfun_lora_gateway_1-channel.menu.FlashSize.4M=4MB (32Mb)
|
|
sparkfun_lora_gateway_1-channel.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.921600=921600
|
|
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.921600.upload.speed=921600
|
|
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.115200=115200
|
|
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.115200.upload.speed=115200
|
|
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.256000.windows=256000
|
|
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.256000.upload.speed=256000
|
|
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.230400=230400
|
|
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.230400.upload.speed=230400
|
|
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.460800.linux=460800
|
|
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.460800.macosx=460800
|
|
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.460800.upload.speed=460800
|
|
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.512000.windows=512000
|
|
sparkfun_lora_gateway_1-channel.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
sparkfun_lora_gateway_1-channel.menu.DebugLevel.none=None
|
|
sparkfun_lora_gateway_1-channel.menu.DebugLevel.none.build.code_debug=0
|
|
sparkfun_lora_gateway_1-channel.menu.DebugLevel.error=Error
|
|
sparkfun_lora_gateway_1-channel.menu.DebugLevel.error.build.code_debug=1
|
|
sparkfun_lora_gateway_1-channel.menu.DebugLevel.warn=Warn
|
|
sparkfun_lora_gateway_1-channel.menu.DebugLevel.warn.build.code_debug=2
|
|
sparkfun_lora_gateway_1-channel.menu.DebugLevel.info=Info
|
|
sparkfun_lora_gateway_1-channel.menu.DebugLevel.info.build.code_debug=3
|
|
sparkfun_lora_gateway_1-channel.menu.DebugLevel.debug=Debug
|
|
sparkfun_lora_gateway_1-channel.menu.DebugLevel.debug.build.code_debug=4
|
|
sparkfun_lora_gateway_1-channel.menu.DebugLevel.verbose=Verbose
|
|
sparkfun_lora_gateway_1-channel.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
sparkfun_lora_gateway_1-channel.menu.EraseFlash.none=Disabled
|
|
sparkfun_lora_gateway_1-channel.menu.EraseFlash.none.upload.erase_cmd=
|
|
sparkfun_lora_gateway_1-channel.menu.EraseFlash.all=Enabled
|
|
sparkfun_lora_gateway_1-channel.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
sparkfun_esp32_iot_redboard.name=SparkFun ESP32 IoT RedBoard
|
|
|
|
sparkfun_esp32_iot_redboard.bootloader.tool=esptool_py
|
|
sparkfun_esp32_iot_redboard.bootloader.tool.default=esptool_py
|
|
|
|
sparkfun_esp32_iot_redboard.upload.tool=esptool_py
|
|
sparkfun_esp32_iot_redboard.upload.tool.default=esptool_py
|
|
sparkfun_esp32_iot_redboard.upload.tool.network=esp_ota
|
|
|
|
sparkfun_esp32_iot_redboard.upload.maximum_size=1310720
|
|
sparkfun_esp32_iot_redboard.upload.maximum_data_size=327680
|
|
sparkfun_esp32_iot_redboard.upload.flags=
|
|
sparkfun_esp32_iot_redboard.upload.extra_flags=
|
|
|
|
sparkfun_esp32_iot_redboard.serial.disableDTR=true
|
|
sparkfun_esp32_iot_redboard.serial.disableRTS=true
|
|
|
|
sparkfun_esp32_iot_redboard.build.tarch=xtensa
|
|
sparkfun_esp32_iot_redboard.build.bootloader_addr=0x1000
|
|
sparkfun_esp32_iot_redboard.build.target=esp32
|
|
sparkfun_esp32_iot_redboard.build.mcu=esp32
|
|
sparkfun_esp32_iot_redboard.build.core=esp32
|
|
sparkfun_esp32_iot_redboard.build.variant=sparkfun_esp32_iot_redboard
|
|
sparkfun_esp32_iot_redboard.build.board=ESP32_IOT_REDBOARD
|
|
|
|
sparkfun_esp32_iot_redboard.build.f_cpu=240000000L
|
|
sparkfun_esp32_iot_redboard.build.flash_size=4MB
|
|
sparkfun_esp32_iot_redboard.build.flash_freq=40m
|
|
sparkfun_esp32_iot_redboard.build.flash_mode=dio
|
|
sparkfun_esp32_iot_redboard.build.boot=dio
|
|
sparkfun_esp32_iot_redboard.build.partitions=default
|
|
sparkfun_esp32_iot_redboard.build.defines=
|
|
sparkfun_esp32_iot_redboard.build.loop_core=
|
|
sparkfun_esp32_iot_redboard.build.event_core=
|
|
|
|
sparkfun_esp32_iot_redboard.menu.PSRAM.disabled=Disabled
|
|
sparkfun_esp32_iot_redboard.menu.PSRAM.disabled.build.defines=
|
|
sparkfun_esp32_iot_redboard.menu.PSRAM.disabled.build.extra_libs=
|
|
sparkfun_esp32_iot_redboard.menu.PSRAM.enabled=Enabled
|
|
sparkfun_esp32_iot_redboard.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
sparkfun_esp32_iot_redboard.menu.PSRAM.enabled.build.extra_libs=
|
|
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.default.build.partitions=default
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
sparkfun_esp32_iot_redboard.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
sparkfun_esp32_iot_redboard.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
sparkfun_esp32_iot_redboard.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
sparkfun_esp32_iot_redboard.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
sparkfun_esp32_iot_redboard.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
sparkfun_esp32_iot_redboard.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
sparkfun_esp32_iot_redboard.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
sparkfun_esp32_iot_redboard.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
sparkfun_esp32_iot_redboard.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
sparkfun_esp32_iot_redboard.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
sparkfun_esp32_iot_redboard.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
sparkfun_esp32_iot_redboard.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
sparkfun_esp32_iot_redboard.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
sparkfun_esp32_iot_redboard.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
sparkfun_esp32_iot_redboard.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
sparkfun_esp32_iot_redboard.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
sparkfun_esp32_iot_redboard.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
sparkfun_esp32_iot_redboard.menu.FlashMode.qio=QIO
|
|
sparkfun_esp32_iot_redboard.menu.FlashMode.qio.build.flash_mode=dio
|
|
sparkfun_esp32_iot_redboard.menu.FlashMode.qio.build.boot=qio
|
|
sparkfun_esp32_iot_redboard.menu.FlashMode.dio=DIO
|
|
sparkfun_esp32_iot_redboard.menu.FlashMode.dio.build.flash_mode=dio
|
|
sparkfun_esp32_iot_redboard.menu.FlashMode.dio.build.boot=dio
|
|
|
|
sparkfun_esp32_iot_redboard.menu.FlashFreq.80=80MHz
|
|
sparkfun_esp32_iot_redboard.menu.FlashFreq.80.build.flash_freq=80m
|
|
sparkfun_esp32_iot_redboard.menu.FlashFreq.40=40MHz
|
|
sparkfun_esp32_iot_redboard.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
sparkfun_esp32_iot_redboard.menu.FlashSize.4M=4MB (32Mb)
|
|
sparkfun_esp32_iot_redboard.menu.FlashSize.4M.build.flash_size=4MB
|
|
sparkfun_esp32_iot_redboard.menu.FlashSize.8M=8MB (64Mb)
|
|
sparkfun_esp32_iot_redboard.menu.FlashSize.8M.build.flash_size=8MB
|
|
sparkfun_esp32_iot_redboard.menu.FlashSize.8M.build.partitions=default_8MB
|
|
sparkfun_esp32_iot_redboard.menu.FlashSize.2M=2MB (16Mb)
|
|
sparkfun_esp32_iot_redboard.menu.FlashSize.2M.build.flash_size=2MB
|
|
sparkfun_esp32_iot_redboard.menu.FlashSize.2M.build.partitions=minimal
|
|
sparkfun_esp32_iot_redboard.menu.FlashSize.16M=16MB (128Mb)
|
|
sparkfun_esp32_iot_redboard.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
sparkfun_esp32_iot_redboard.menu.UploadSpeed.921600=921600
|
|
sparkfun_esp32_iot_redboard.menu.UploadSpeed.921600.upload.speed=921600
|
|
sparkfun_esp32_iot_redboard.menu.UploadSpeed.115200=115200
|
|
sparkfun_esp32_iot_redboard.menu.UploadSpeed.115200.upload.speed=115200
|
|
sparkfun_esp32_iot_redboard.menu.UploadSpeed.256000.windows=256000
|
|
sparkfun_esp32_iot_redboard.menu.UploadSpeed.256000.upload.speed=256000
|
|
sparkfun_esp32_iot_redboard.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
sparkfun_esp32_iot_redboard.menu.UploadSpeed.230400=230400
|
|
sparkfun_esp32_iot_redboard.menu.UploadSpeed.230400.upload.speed=230400
|
|
sparkfun_esp32_iot_redboard.menu.UploadSpeed.460800.linux=460800
|
|
sparkfun_esp32_iot_redboard.menu.UploadSpeed.460800.macosx=460800
|
|
sparkfun_esp32_iot_redboard.menu.UploadSpeed.460800.upload.speed=460800
|
|
sparkfun_esp32_iot_redboard.menu.UploadSpeed.512000.windows=512000
|
|
sparkfun_esp32_iot_redboard.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
sparkfun_esp32_iot_redboard.menu.LoopCore.1=Core 1
|
|
sparkfun_esp32_iot_redboard.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
sparkfun_esp32_iot_redboard.menu.LoopCore.0=Core 0
|
|
sparkfun_esp32_iot_redboard.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
sparkfun_esp32_iot_redboard.menu.EventsCore.1=Core 1
|
|
sparkfun_esp32_iot_redboard.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
sparkfun_esp32_iot_redboard.menu.EventsCore.0=Core 0
|
|
sparkfun_esp32_iot_redboard.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
sparkfun_esp32_iot_redboard.menu.DebugLevel.none=None
|
|
sparkfun_esp32_iot_redboard.menu.DebugLevel.none.build.code_debug=0
|
|
sparkfun_esp32_iot_redboard.menu.DebugLevel.error=Error
|
|
sparkfun_esp32_iot_redboard.menu.DebugLevel.error.build.code_debug=1
|
|
sparkfun_esp32_iot_redboard.menu.DebugLevel.warn=Warn
|
|
sparkfun_esp32_iot_redboard.menu.DebugLevel.warn.build.code_debug=2
|
|
sparkfun_esp32_iot_redboard.menu.DebugLevel.info=Info
|
|
sparkfun_esp32_iot_redboard.menu.DebugLevel.info.build.code_debug=3
|
|
sparkfun_esp32_iot_redboard.menu.DebugLevel.debug=Debug
|
|
sparkfun_esp32_iot_redboard.menu.DebugLevel.debug.build.code_debug=4
|
|
sparkfun_esp32_iot_redboard.menu.DebugLevel.verbose=Verbose
|
|
sparkfun_esp32_iot_redboard.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
sparkfun_esp32_iot_redboard.menu.EraseFlash.none=Disabled
|
|
sparkfun_esp32_iot_redboard.menu.EraseFlash.none.upload.erase_cmd=
|
|
sparkfun_esp32_iot_redboard.menu.EraseFlash.all=Enabled
|
|
sparkfun_esp32_iot_redboard.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
sparkfun_esp32c6_qwiic_pocket.name=SparkFun ESP32-C6 Qwiic Pocket
|
|
|
|
sparkfun_esp32c6_qwiic_pocket.bootloader.tool=esptool_py
|
|
sparkfun_esp32c6_qwiic_pocket.bootloader.tool.default=esptool_py
|
|
|
|
sparkfun_esp32c6_qwiic_pocket.upload.tool=esptool_py
|
|
sparkfun_esp32c6_qwiic_pocket.upload.tool.default=esptool_py
|
|
sparkfun_esp32c6_qwiic_pocket.upload.tool.network=esp_ota
|
|
|
|
sparkfun_esp32c6_qwiic_pocket.upload.maximum_size=1310720
|
|
sparkfun_esp32c6_qwiic_pocket.upload.maximum_data_size=327680
|
|
sparkfun_esp32c6_qwiic_pocket.upload.flags=
|
|
sparkfun_esp32c6_qwiic_pocket.upload.extra_flags=
|
|
sparkfun_esp32c6_qwiic_pocket.upload.use_1200bps_touch=false
|
|
sparkfun_esp32c6_qwiic_pocket.upload.wait_for_upload_port=false
|
|
|
|
sparkfun_esp32c6_qwiic_pocket.serial.disableDTR=false
|
|
sparkfun_esp32c6_qwiic_pocket.serial.disableRTS=false
|
|
|
|
sparkfun_esp32c6_qwiic_pocket.build.tarch=riscv32
|
|
sparkfun_esp32c6_qwiic_pocket.build.target=esp
|
|
sparkfun_esp32c6_qwiic_pocket.build.mcu=esp32c6
|
|
sparkfun_esp32c6_qwiic_pocket.build.core=esp32
|
|
sparkfun_esp32c6_qwiic_pocket.build.variant=sparkfun_esp32c6_qwiic_pocket
|
|
sparkfun_esp32c6_qwiic_pocket.build.board=ESP32C6_QWIIC_POCKET
|
|
sparkfun_esp32c6_qwiic_pocket.build.bootloader_addr=0x0
|
|
|
|
sparkfun_esp32c6_qwiic_pocket.build.cdc_on_boot=0
|
|
sparkfun_esp32c6_qwiic_pocket.build.f_cpu=160000000L
|
|
sparkfun_esp32c6_qwiic_pocket.build.flash_size=4MB
|
|
sparkfun_esp32c6_qwiic_pocket.build.flash_freq=80m
|
|
sparkfun_esp32c6_qwiic_pocket.build.flash_mode=qio
|
|
sparkfun_esp32c6_qwiic_pocket.build.boot=qio
|
|
sparkfun_esp32c6_qwiic_pocket.build.partitions=default
|
|
sparkfun_esp32c6_qwiic_pocket.build.defines=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
sparkfun_esp32c6_qwiic_pocket.menu.JTAGAdapter.default=Disabled
|
|
sparkfun_esp32c6_qwiic_pocket.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
sparkfun_esp32c6_qwiic_pocket.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
sparkfun_esp32c6_qwiic_pocket.menu.JTAGAdapter.builtin.build.openocdscript=esp32c6-builtin.cfg
|
|
sparkfun_esp32c6_qwiic_pocket.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
sparkfun_esp32c6_qwiic_pocket.menu.JTAGAdapter.external=FTDI Adapter
|
|
sparkfun_esp32c6_qwiic_pocket.menu.JTAGAdapter.external.build.openocdscript=esp32c6-ftdi.cfg
|
|
sparkfun_esp32c6_qwiic_pocket.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
sparkfun_esp32c6_qwiic_pocket.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
sparkfun_esp32c6_qwiic_pocket.menu.JTAGAdapter.bridge.build.openocdscript=esp32c6-bridge.cfg
|
|
sparkfun_esp32c6_qwiic_pocket.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
sparkfun_esp32c6_qwiic_pocket.menu.CDCOnBoot.default=Enabled
|
|
sparkfun_esp32c6_qwiic_pocket.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
sparkfun_esp32c6_qwiic_pocket.menu.CDCOnBoot.cdc=Disabled
|
|
sparkfun_esp32c6_qwiic_pocket.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
|
|
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.default.build.partitions=default
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.zigbee=Zigbee 4MB with spiffs
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.zigbee.build.partitions=zigbee
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.zigbee.upload.maximum_size=1310720
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.custom=Custom
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.custom.build.partitions=
|
|
sparkfun_esp32c6_qwiic_pocket.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
sparkfun_esp32c6_qwiic_pocket.menu.CPUFreq.160=160MHz (WiFi)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
sparkfun_esp32c6_qwiic_pocket.menu.CPUFreq.80=80MHz (WiFi)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
sparkfun_esp32c6_qwiic_pocket.menu.CPUFreq.40=40MHz
|
|
sparkfun_esp32c6_qwiic_pocket.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
sparkfun_esp32c6_qwiic_pocket.menu.CPUFreq.20=20MHz
|
|
sparkfun_esp32c6_qwiic_pocket.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
sparkfun_esp32c6_qwiic_pocket.menu.CPUFreq.10=10MHz
|
|
sparkfun_esp32c6_qwiic_pocket.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashMode.qio=QIO
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashMode.qio.build.flash_mode=dio
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashMode.qio.build.boot=qio
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashMode.dio=DIO
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashMode.dio.build.flash_mode=dio
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashMode.dio.build.boot=dio
|
|
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashFreq.80=80MHz
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashFreq.80.build.flash_freq=80m
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashFreq.40=40MHz
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashSize.4M=4MB (32Mb)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashSize.4M.build.flash_size=4MB
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashSize.8M=8MB (64Mb)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashSize.8M.build.flash_size=8MB
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashSize.8M.build.partitions=default_8MB
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashSize.2M=2MB (16Mb)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashSize.2M.build.flash_size=2MB
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashSize.2M.build.partitions=minimal
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashSize.16M=16MB (128Mb)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
sparkfun_esp32c6_qwiic_pocket.menu.UploadSpeed.921600=921600
|
|
sparkfun_esp32c6_qwiic_pocket.menu.UploadSpeed.921600.upload.speed=921600
|
|
sparkfun_esp32c6_qwiic_pocket.menu.UploadSpeed.115200=115200
|
|
sparkfun_esp32c6_qwiic_pocket.menu.UploadSpeed.115200.upload.speed=115200
|
|
sparkfun_esp32c6_qwiic_pocket.menu.UploadSpeed.256000.windows=256000
|
|
sparkfun_esp32c6_qwiic_pocket.menu.UploadSpeed.256000.upload.speed=256000
|
|
sparkfun_esp32c6_qwiic_pocket.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
sparkfun_esp32c6_qwiic_pocket.menu.UploadSpeed.230400=230400
|
|
sparkfun_esp32c6_qwiic_pocket.menu.UploadSpeed.230400.upload.speed=230400
|
|
sparkfun_esp32c6_qwiic_pocket.menu.UploadSpeed.460800.linux=460800
|
|
sparkfun_esp32c6_qwiic_pocket.menu.UploadSpeed.460800.macosx=460800
|
|
sparkfun_esp32c6_qwiic_pocket.menu.UploadSpeed.460800.upload.speed=460800
|
|
sparkfun_esp32c6_qwiic_pocket.menu.UploadSpeed.512000.windows=512000
|
|
sparkfun_esp32c6_qwiic_pocket.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
sparkfun_esp32c6_qwiic_pocket.menu.DebugLevel.none=None
|
|
sparkfun_esp32c6_qwiic_pocket.menu.DebugLevel.none.build.code_debug=0
|
|
sparkfun_esp32c6_qwiic_pocket.menu.DebugLevel.error=Error
|
|
sparkfun_esp32c6_qwiic_pocket.menu.DebugLevel.error.build.code_debug=1
|
|
sparkfun_esp32c6_qwiic_pocket.menu.DebugLevel.warn=Warn
|
|
sparkfun_esp32c6_qwiic_pocket.menu.DebugLevel.warn.build.code_debug=2
|
|
sparkfun_esp32c6_qwiic_pocket.menu.DebugLevel.info=Info
|
|
sparkfun_esp32c6_qwiic_pocket.menu.DebugLevel.info.build.code_debug=3
|
|
sparkfun_esp32c6_qwiic_pocket.menu.DebugLevel.debug=Debug
|
|
sparkfun_esp32c6_qwiic_pocket.menu.DebugLevel.debug.build.code_debug=4
|
|
sparkfun_esp32c6_qwiic_pocket.menu.DebugLevel.verbose=Verbose
|
|
sparkfun_esp32c6_qwiic_pocket.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
sparkfun_esp32c6_qwiic_pocket.menu.EraseFlash.none=Disabled
|
|
sparkfun_esp32c6_qwiic_pocket.menu.EraseFlash.none.upload.erase_cmd=
|
|
sparkfun_esp32c6_qwiic_pocket.menu.EraseFlash.all=Enabled
|
|
sparkfun_esp32c6_qwiic_pocket.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.default=Disabled
|
|
sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.ed=Zigbee ED (end device)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
|
|
sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
|
|
sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
|
|
sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
|
|
sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
# SparkFun Pro Micro ESP32C3
|
|
|
|
sparkfun_pro_micro_esp32c3.name=SparkFun Pro Micro - ESP32C3
|
|
sparkfun_pro_micro_esp32c3.vid.0=0x1B4F
|
|
sparkfun_pro_micro_esp32c3.pid.0=0x0035
|
|
|
|
sparkfun_pro_micro_esp32c3.bootloader.tool=esptool_py
|
|
sparkfun_pro_micro_esp32c3.bootloader.tool.default=esptool_py
|
|
|
|
sparkfun_pro_micro_esp32c3.upload.tool=esptool_py
|
|
sparkfun_pro_micro_esp32c3.upload.tool.default=esptool_py
|
|
sparkfun_pro_micro_esp32c3.upload.tool.network=esp_ota
|
|
|
|
sparkfun_pro_micro_esp32c3.upload.maximum_size=1310720
|
|
sparkfun_pro_micro_esp32c3.upload.maximum_data_size=327680
|
|
sparkfun_pro_micro_esp32c3.upload.flags=
|
|
sparkfun_pro_micro_esp32c3.upload.extra_flags=
|
|
sparkfun_pro_micro_esp32c3.upload.use_1200bps_touch=false
|
|
sparkfun_pro_micro_esp32c3.upload.wait_for_upload_port=false
|
|
|
|
sparkfun_pro_micro_esp32c3.serial.disableDTR=false
|
|
sparkfun_pro_micro_esp32c3.serial.disableRTS=false
|
|
|
|
sparkfun_pro_micro_esp32c3.build.tarch=riscv32
|
|
sparkfun_pro_micro_esp32c3.build.bootloader_addr=0x0
|
|
sparkfun_pro_micro_esp32c3.build.target=esp
|
|
sparkfun_pro_micro_esp32c3.build.mcu=esp32c3
|
|
sparkfun_pro_micro_esp32c3.build.core=esp32
|
|
sparkfun_pro_micro_esp32c3.build.variant=sparkfun_pro_micro_esp32c3
|
|
sparkfun_pro_micro_esp32c3.build.board=SPARKFUN_PRO_MICRO_ESP32C3
|
|
|
|
sparkfun_pro_micro_esp32c3.build.cdc_on_boot=1
|
|
sparkfun_pro_micro_esp32c3.build.f_cpu=160000000L
|
|
sparkfun_pro_micro_esp32c3.build.flash_size=4MB
|
|
sparkfun_pro_micro_esp32c3.build.flash_freq=80m
|
|
sparkfun_pro_micro_esp32c3.build.flash_mode=dio
|
|
sparkfun_pro_micro_esp32c3.build.boot=qio
|
|
sparkfun_pro_micro_esp32c3.build.partitions=default
|
|
sparkfun_pro_micro_esp32c3.build.defines=
|
|
|
|
sparkfun_pro_micro_esp32c3.menu.JTAGAdapter.default=Disabled
|
|
sparkfun_pro_micro_esp32c3.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
sparkfun_pro_micro_esp32c3.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
sparkfun_pro_micro_esp32c3.menu.JTAGAdapter.builtin.build.openocdscript=esp32c3-builtin.cfg
|
|
sparkfun_pro_micro_esp32c3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
sparkfun_pro_micro_esp32c3.menu.JTAGAdapter.external=FTDI Adapter
|
|
sparkfun_pro_micro_esp32c3.menu.JTAGAdapter.external.build.openocdscript=esp32c3-ftdi.cfg
|
|
sparkfun_pro_micro_esp32c3.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
sparkfun_pro_micro_esp32c3.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
sparkfun_pro_micro_esp32c3.menu.JTAGAdapter.bridge.build.openocdscript=esp32c3-bridge.cfg
|
|
sparkfun_pro_micro_esp32c3.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
sparkfun_pro_micro_esp32c3.menu.CDCOnBoot.cdc=Enabled
|
|
sparkfun_pro_micro_esp32c3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
sparkfun_pro_micro_esp32c3.menu.CDCOnBoot.default=Enabled
|
|
sparkfun_pro_micro_esp32c3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.default.build.partitions=default
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
sparkfun_pro_micro_esp32c3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
sparkfun_pro_micro_esp32c3.menu.CPUFreq.160=160MHz (WiFi)
|
|
sparkfun_pro_micro_esp32c3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
sparkfun_pro_micro_esp32c3.menu.CPUFreq.80=80MHz (WiFi)
|
|
sparkfun_pro_micro_esp32c3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
sparkfun_pro_micro_esp32c3.menu.CPUFreq.40=40MHz
|
|
sparkfun_pro_micro_esp32c3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
sparkfun_pro_micro_esp32c3.menu.CPUFreq.20=20MHz
|
|
sparkfun_pro_micro_esp32c3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
sparkfun_pro_micro_esp32c3.menu.CPUFreq.10=10MHz
|
|
sparkfun_pro_micro_esp32c3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
sparkfun_pro_micro_esp32c3.menu.FlashMode.qio=QIO
|
|
sparkfun_pro_micro_esp32c3.menu.FlashMode.qio.build.flash_mode=dio
|
|
sparkfun_pro_micro_esp32c3.menu.FlashMode.qio.build.boot=qio
|
|
sparkfun_pro_micro_esp32c3.menu.FlashMode.dio=DIO
|
|
sparkfun_pro_micro_esp32c3.menu.FlashMode.dio.build.flash_mode=dio
|
|
sparkfun_pro_micro_esp32c3.menu.FlashMode.dio.build.boot=dio
|
|
sparkfun_pro_micro_esp32c3.menu.FlashMode.qout=QOUT
|
|
sparkfun_pro_micro_esp32c3.menu.FlashMode.qout.build.flash_mode=dout
|
|
sparkfun_pro_micro_esp32c3.menu.FlashMode.qout.build.boot=qout
|
|
sparkfun_pro_micro_esp32c3.menu.FlashMode.dout=DOUT
|
|
sparkfun_pro_micro_esp32c3.menu.FlashMode.dout.build.flash_mode=dout
|
|
sparkfun_pro_micro_esp32c3.menu.FlashMode.dout.build.boot=dout
|
|
|
|
sparkfun_pro_micro_esp32c3.menu.FlashFreq.80=80MHz
|
|
sparkfun_pro_micro_esp32c3.menu.FlashFreq.80.build.flash_freq=80m
|
|
sparkfun_pro_micro_esp32c3.menu.FlashFreq.40=40MHz
|
|
sparkfun_pro_micro_esp32c3.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
sparkfun_pro_micro_esp32c3.menu.FlashSize.4M=4MB (32Mb)
|
|
sparkfun_pro_micro_esp32c3.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
sparkfun_pro_micro_esp32c3.menu.UploadSpeed.921600=921600
|
|
sparkfun_pro_micro_esp32c3.menu.UploadSpeed.921600.upload.speed=921600
|
|
sparkfun_pro_micro_esp32c3.menu.UploadSpeed.115200=115200
|
|
sparkfun_pro_micro_esp32c3.menu.UploadSpeed.115200.upload.speed=115200
|
|
sparkfun_pro_micro_esp32c3.menu.UploadSpeed.256000.windows=256000
|
|
sparkfun_pro_micro_esp32c3.menu.UploadSpeed.256000.upload.speed=256000
|
|
sparkfun_pro_micro_esp32c3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
sparkfun_pro_micro_esp32c3.menu.UploadSpeed.230400=230400
|
|
sparkfun_pro_micro_esp32c3.menu.UploadSpeed.230400.upload.speed=230400
|
|
sparkfun_pro_micro_esp32c3.menu.UploadSpeed.460800.linux=460800
|
|
sparkfun_pro_micro_esp32c3.menu.UploadSpeed.460800.macosx=460800
|
|
sparkfun_pro_micro_esp32c3.menu.UploadSpeed.460800.upload.speed=460800
|
|
sparkfun_pro_micro_esp32c3.menu.UploadSpeed.512000.windows=512000
|
|
sparkfun_pro_micro_esp32c3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
sparkfun_pro_micro_esp32c3.menu.DebugLevel.none=None
|
|
sparkfun_pro_micro_esp32c3.menu.DebugLevel.none.build.code_debug=0
|
|
sparkfun_pro_micro_esp32c3.menu.DebugLevel.error=Error
|
|
sparkfun_pro_micro_esp32c3.menu.DebugLevel.error.build.code_debug=1
|
|
sparkfun_pro_micro_esp32c3.menu.DebugLevel.warn=Warn
|
|
sparkfun_pro_micro_esp32c3.menu.DebugLevel.warn.build.code_debug=2
|
|
sparkfun_pro_micro_esp32c3.menu.DebugLevel.info=Info
|
|
sparkfun_pro_micro_esp32c3.menu.DebugLevel.info.build.code_debug=3
|
|
sparkfun_pro_micro_esp32c3.menu.DebugLevel.debug=Debug
|
|
sparkfun_pro_micro_esp32c3.menu.DebugLevel.debug.build.code_debug=4
|
|
sparkfun_pro_micro_esp32c3.menu.DebugLevel.verbose=Verbose
|
|
sparkfun_pro_micro_esp32c3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
sparkfun_pro_micro_esp32c3.menu.EraseFlash.none=Disabled
|
|
sparkfun_pro_micro_esp32c3.menu.EraseFlash.none.upload.erase_cmd=
|
|
sparkfun_pro_micro_esp32c3.menu.EraseFlash.all=Enabled
|
|
sparkfun_pro_micro_esp32c3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
nina_w10.name=u-blox NINA-W10 series (ESP32)
|
|
|
|
nina_w10.bootloader.tool=esptool_py
|
|
nina_w10.bootloader.tool.default=esptool_py
|
|
|
|
nina_w10.upload.tool=esptool_py
|
|
nina_w10.upload.tool.default=esptool_py
|
|
nina_w10.upload.tool.network=esp_ota
|
|
|
|
nina_w10.upload.maximum_size=1310720
|
|
nina_w10.upload.maximum_data_size=327680
|
|
nina_w10.upload.flags=
|
|
nina_w10.upload.extra_flags=
|
|
|
|
nina_w10.serial.disableDTR=true
|
|
nina_w10.serial.disableRTS=true
|
|
|
|
nina_w10.build.tarch=xtensa
|
|
nina_w10.build.bootloader_addr=0x1000
|
|
nina_w10.build.target=esp32
|
|
nina_w10.build.mcu=esp32
|
|
nina_w10.build.core=esp32
|
|
nina_w10.build.variant=nina_w10
|
|
nina_w10.build.board=UBLOX_NINA_W10
|
|
nina_w10.build.f_cpu=240000000L
|
|
nina_w10.build.boot=dio
|
|
nina_w10.build.partitions=minimal
|
|
nina_w10.build.flash_mode=dio
|
|
nina_w10.build.flash_size=2MB
|
|
nina_w10.build.flash_freq=40m
|
|
nina_w10.build.defines=
|
|
nina_w10.build.extra_libs=
|
|
nina_w10.build.loop_core=
|
|
nina_w10.build.event_core=
|
|
|
|
nina_w10.menu.UploadSpeed.921600=921600
|
|
nina_w10.menu.UploadSpeed.921600.upload.speed=921600
|
|
nina_w10.menu.UploadSpeed.115200=115200
|
|
nina_w10.menu.UploadSpeed.115200.upload.speed=115200
|
|
nina_w10.menu.UploadSpeed.256000.windows=256000
|
|
nina_w10.menu.UploadSpeed.256000.upload.speed=256000
|
|
nina_w10.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
nina_w10.menu.UploadSpeed.230400=230400
|
|
nina_w10.menu.UploadSpeed.230400.upload.speed=230400
|
|
nina_w10.menu.UploadSpeed.460800.linux=460800
|
|
nina_w10.menu.UploadSpeed.460800.macosx=460800
|
|
nina_w10.menu.UploadSpeed.460800.upload.speed=460800
|
|
nina_w10.menu.UploadSpeed.512000.windows=512000
|
|
nina_w10.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
nina_w10.menu.FlashSize.2M=2MB (16Mb, NINA-W101/W102)
|
|
nina_w10.menu.FlashSize.2M.build.flash_size=2MB
|
|
nina_w10.menu.FlashSize.2M.build.partitions=minimal
|
|
nina_w10.menu.FlashSize.4M=4MB (32Mb, NINA-W106-00B)
|
|
nina_w10.menu.FlashSize.4M.build.flash_size=4MB
|
|
nina_w10.menu.FlashSize.4M.build.partitions=default
|
|
nina_w10.menu.FlashSize.8M=8MB (64Mb, NINA-W106-10B)
|
|
nina_w10.menu.FlashSize.8M.build.flash_size=8MB
|
|
nina_w10.menu.FlashSize.8M.build.partitions=default_8MB
|
|
|
|
nina_w10.menu.FlashFreq.80=80MHz
|
|
nina_w10.menu.FlashFreq.80.build.flash_freq=80m
|
|
nina_w10.menu.FlashFreq.40=40MHz
|
|
nina_w10.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
nina_w10.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
nina_w10.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
nina_w10.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
nina_w10.menu.PartitionScheme.default.build.partitions=default
|
|
nina_w10.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
nina_w10.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
nina_w10.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
nina_w10.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
nina_w10.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
nina_w10.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
nina_w10.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
nina_w10.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
nina_w10.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
nina_w10.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
nina_w10.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
nina_w10.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
nina_w10.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
nina_w10.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
nina_w10.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
nina_w10.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
nina_w10.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
nina_w10.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
nina_w10.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
nina_w10.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
nina_w10.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
nina_w10.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
nina_w10.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
nina_w10.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
nina_w10.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
nina_w10.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
nina_w10.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
nina_w10.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
nina_w10.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
nina_w10.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
nina_w10.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
nina_w10.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
nina_w10.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
nina_w10.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
nina_w10.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
nina_w10.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
nina_w10.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
nina_w10.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
nina_w10.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
nina_w10.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
nina_w10.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
nina_w10.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
nina_w10.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
nina_w10.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
nina_w10.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
nina_w10.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
nina_w10.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
nina_w10.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
nina_w10.menu.LoopCore.1=Core 1
|
|
nina_w10.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
nina_w10.menu.LoopCore.0=Core 0
|
|
nina_w10.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
nina_w10.menu.EventsCore.1=Core 1
|
|
nina_w10.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
nina_w10.menu.EventsCore.0=Core 0
|
|
nina_w10.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
nina_w10.menu.DebugLevel.none=None
|
|
nina_w10.menu.DebugLevel.none.build.code_debug=0
|
|
nina_w10.menu.DebugLevel.error=Error
|
|
nina_w10.menu.DebugLevel.error.build.code_debug=1
|
|
nina_w10.menu.DebugLevel.warn=Warn
|
|
nina_w10.menu.DebugLevel.warn.build.code_debug=2
|
|
nina_w10.menu.DebugLevel.info=Info
|
|
nina_w10.menu.DebugLevel.info.build.code_debug=3
|
|
nina_w10.menu.DebugLevel.debug=Debug
|
|
nina_w10.menu.DebugLevel.debug.build.code_debug=4
|
|
nina_w10.menu.DebugLevel.verbose=Verbose
|
|
nina_w10.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
nina_w10.menu.EraseFlash.none=Disabled
|
|
nina_w10.menu.EraseFlash.none.upload.erase_cmd=
|
|
nina_w10.menu.EraseFlash.all=Enabled
|
|
nina_w10.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
nora_w10.name=u-blox NORA-W10 series (ESP32-S3)
|
|
|
|
nora_w10.bootloader.tool=esptool_py
|
|
nora_w10.bootloader.tool.default=esptool_py
|
|
|
|
nora_w10.upload.tool=esptool_py
|
|
nora_w10.upload.tool.default=esptool_py
|
|
nora_w10.upload.tool.network=esp_ota
|
|
|
|
nora_w10.upload.maximum_size=1310720
|
|
nora_w10.upload.maximum_data_size=327680
|
|
nora_w10.upload.flags=
|
|
nora_w10.upload.extra_flags=
|
|
nora_w10.upload.use_1200bps_touch=false
|
|
nora_w10.upload.wait_for_upload_port=false
|
|
|
|
nora_w10.serial.disableDTR=false
|
|
nora_w10.serial.disableRTS=false
|
|
|
|
nora_w10.build.tarch=xtensa
|
|
nora_w10.build.bootloader_addr=0x0
|
|
nora_w10.build.target=esp32s3
|
|
nora_w10.build.mcu=esp32s3
|
|
nora_w10.build.core=esp32
|
|
nora_w10.build.variant=nora_w10
|
|
nora_w10.build.board=UBLOX_NORA_W10
|
|
|
|
nora_w10.build.usb_mode=1
|
|
nora_w10.build.cdc_on_boot=0
|
|
nora_w10.build.msc_on_boot=0
|
|
nora_w10.build.dfu_on_boot=0
|
|
nora_w10.build.f_cpu=240000000L
|
|
nora_w10.build.flash_size=4MB
|
|
nora_w10.build.flash_freq=80m
|
|
nora_w10.build.flash_mode=dio
|
|
nora_w10.build.boot=qio
|
|
nora_w10.build.boot_freq=80m
|
|
nora_w10.build.partitions=default
|
|
nora_w10.build.defines=
|
|
nora_w10.build.loop_core=
|
|
nora_w10.build.event_core=
|
|
nora_w10.build.psram_type=qspi
|
|
nora_w10.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
nora_w10.menu.PSRAM.disabled=Disabled
|
|
nora_w10.menu.PSRAM.disabled.build.defines=
|
|
nora_w10.menu.PSRAM.disabled.build.psram_type=qspi
|
|
nora_w10.menu.PSRAM.enabled=QSPI PSRAM
|
|
nora_w10.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
nora_w10.menu.PSRAM.enabled.build.psram_type=qspi
|
|
nora_w10.menu.PSRAM.opi=OPI PSRAM
|
|
nora_w10.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
nora_w10.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
nora_w10.menu.FlashMode.qio=QIO 80MHz
|
|
nora_w10.menu.FlashMode.qio.build.flash_mode=dio
|
|
nora_w10.menu.FlashMode.qio.build.boot=qio
|
|
nora_w10.menu.FlashMode.qio.build.boot_freq=80m
|
|
nora_w10.menu.FlashMode.qio.build.flash_freq=80m
|
|
nora_w10.menu.FlashMode.qio120=QIO 120MHz
|
|
nora_w10.menu.FlashMode.qio120.build.flash_mode=dio
|
|
nora_w10.menu.FlashMode.qio120.build.boot=qio
|
|
nora_w10.menu.FlashMode.qio120.build.boot_freq=120m
|
|
nora_w10.menu.FlashMode.qio120.build.flash_freq=80m
|
|
nora_w10.menu.FlashMode.dio=DIO 80MHz
|
|
nora_w10.menu.FlashMode.dio.build.flash_mode=dio
|
|
nora_w10.menu.FlashMode.dio.build.boot=dio
|
|
nora_w10.menu.FlashMode.dio.build.boot_freq=80m
|
|
nora_w10.menu.FlashMode.dio.build.flash_freq=80m
|
|
nora_w10.menu.FlashMode.opi=OPI 80MHz
|
|
nora_w10.menu.FlashMode.opi.build.flash_mode=dout
|
|
nora_w10.menu.FlashMode.opi.build.boot=opi
|
|
nora_w10.menu.FlashMode.opi.build.boot_freq=80m
|
|
nora_w10.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
nora_w10.menu.FlashSize.4M=4MB (32Mb)
|
|
nora_w10.menu.FlashSize.4M.build.flash_size=4MB
|
|
nora_w10.menu.FlashSize.8M=8MB (64Mb)
|
|
nora_w10.menu.FlashSize.8M.build.flash_size=8MB
|
|
nora_w10.menu.FlashSize.8M.build.partitions=default_8MB
|
|
#nora_w10.menu.FlashSize.16M=16MB (128Mb)
|
|
#nora_w10.menu.FlashSize.16M.build.flash_size=16MB
|
|
#nora_w10.menu.FlashSize.32M=32MB (256Mb)
|
|
#nora_w10.menu.FlashSize.32M.build.flash_size=32MB
|
|
|
|
nora_w10.menu.LoopCore.1=Core 1
|
|
nora_w10.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
nora_w10.menu.LoopCore.0=Core 0
|
|
nora_w10.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
nora_w10.menu.EventsCore.1=Core 1
|
|
nora_w10.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
nora_w10.menu.EventsCore.0=Core 0
|
|
nora_w10.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
nora_w10.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
nora_w10.menu.USBMode.hwcdc.build.usb_mode=1
|
|
nora_w10.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
nora_w10.menu.USBMode.default.build.usb_mode=0
|
|
|
|
nora_w10.menu.CDCOnBoot.default=Disabled
|
|
nora_w10.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
nora_w10.menu.CDCOnBoot.cdc=Enabled
|
|
nora_w10.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
nora_w10.menu.MSCOnBoot.default=Disabled
|
|
nora_w10.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
nora_w10.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
nora_w10.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
nora_w10.menu.DFUOnBoot.default=Disabled
|
|
nora_w10.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
nora_w10.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
nora_w10.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
nora_w10.menu.UploadMode.default=UART0 / Hardware CDC
|
|
nora_w10.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
nora_w10.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
nora_w10.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
nora_w10.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
nora_w10.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
nora_w10.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
nora_w10.menu.PartitionScheme.default.build.partitions=default
|
|
nora_w10.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
nora_w10.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
nora_w10.menu.PartitionScheme.default_8MB=8M Flash (3MB APP/1.5MB FAT)
|
|
nora_w10.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
nora_w10.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
nora_w10.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
nora_w10.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
nora_w10.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
nora_w10.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
nora_w10.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
nora_w10.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
nora_w10.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
nora_w10.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
nora_w10.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
nora_w10.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
nora_w10.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
nora_w10.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
nora_w10.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
nora_w10.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
nora_w10.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
nora_w10.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
nora_w10.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
nora_w10.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
nora_w10.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
nora_w10.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
#nora_w10.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
|
|
#nora_w10.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
#nora_w10.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
#nora_w10.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9MB FATFS)
|
|
#nora_w10.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
#nora_w10.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
nora_w10.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
nora_w10.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
nora_w10.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
nora_w10.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
nora_w10.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
nora_w10.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
nora_w10.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
nora_w10.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
nora_w10.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
nora_w10.menu.CPUFreq.240=240MHz (WiFi)
|
|
nora_w10.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
nora_w10.menu.CPUFreq.160=160MHz (WiFi)
|
|
nora_w10.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
nora_w10.menu.CPUFreq.80=80MHz (WiFi)
|
|
nora_w10.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
nora_w10.menu.CPUFreq.40=40MHz
|
|
nora_w10.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
nora_w10.menu.CPUFreq.20=20MHz
|
|
nora_w10.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
nora_w10.menu.CPUFreq.10=10MHz
|
|
nora_w10.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
nora_w10.menu.UploadSpeed.921600=921600
|
|
nora_w10.menu.UploadSpeed.921600.upload.speed=921600
|
|
nora_w10.menu.UploadSpeed.115200=115200
|
|
nora_w10.menu.UploadSpeed.115200.upload.speed=115200
|
|
nora_w10.menu.UploadSpeed.256000.windows=256000
|
|
nora_w10.menu.UploadSpeed.256000.upload.speed=256000
|
|
nora_w10.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
nora_w10.menu.UploadSpeed.230400=230400
|
|
nora_w10.menu.UploadSpeed.230400.upload.speed=230400
|
|
nora_w10.menu.UploadSpeed.460800.linux=460800
|
|
nora_w10.menu.UploadSpeed.460800.macosx=460800
|
|
nora_w10.menu.UploadSpeed.460800.upload.speed=460800
|
|
nora_w10.menu.UploadSpeed.512000.windows=512000
|
|
nora_w10.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
nora_w10.menu.DebugLevel.none=None
|
|
nora_w10.menu.DebugLevel.none.build.code_debug=0
|
|
nora_w10.menu.DebugLevel.error=Error
|
|
nora_w10.menu.DebugLevel.error.build.code_debug=1
|
|
nora_w10.menu.DebugLevel.warn=Warn
|
|
nora_w10.menu.DebugLevel.warn.build.code_debug=2
|
|
nora_w10.menu.DebugLevel.info=Info
|
|
nora_w10.menu.DebugLevel.info.build.code_debug=3
|
|
nora_w10.menu.DebugLevel.debug=Debug
|
|
nora_w10.menu.DebugLevel.debug.build.code_debug=4
|
|
nora_w10.menu.DebugLevel.verbose=Verbose
|
|
nora_w10.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
nora_w10.menu.EraseFlash.none=Disabled
|
|
nora_w10.menu.EraseFlash.none.upload.erase_cmd=
|
|
nora_w10.menu.EraseFlash.all=Enabled
|
|
nora_w10.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
widora-air.name=Widora AIR
|
|
|
|
widora-air.bootloader.tool=esptool_py
|
|
widora-air.bootloader.tool.default=esptool_py
|
|
|
|
widora-air.upload.tool=esptool_py
|
|
widora-air.upload.tool.default=esptool_py
|
|
widora-air.upload.tool.network=esp_ota
|
|
|
|
widora-air.upload.maximum_size=1310720
|
|
widora-air.upload.maximum_data_size=327680
|
|
widora-air.upload.flags=
|
|
widora-air.upload.extra_flags=
|
|
|
|
widora-air.serial.disableDTR=true
|
|
widora-air.serial.disableRTS=true
|
|
|
|
widora-air.build.tarch=xtensa
|
|
widora-air.build.bootloader_addr=0x1000
|
|
widora-air.build.target=esp32
|
|
widora-air.build.mcu=esp32
|
|
widora-air.build.core=esp32
|
|
widora-air.build.variant=widora-air
|
|
widora-air.build.board=WIDORA_AIR
|
|
|
|
widora-air.build.f_cpu=240000000L
|
|
widora-air.build.flash_mode=dio
|
|
widora-air.build.flash_size=16MB
|
|
widora-air.build.boot=dio
|
|
widora-air.build.partitions=default
|
|
widora-air.build.defines=
|
|
|
|
widora-air.menu.FlashFreq.80=80MHz
|
|
widora-air.menu.FlashFreq.80.build.flash_freq=80m
|
|
widora-air.menu.FlashFreq.40=40MHz
|
|
widora-air.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
widora-air.menu.UploadSpeed.921600=921600
|
|
widora-air.menu.UploadSpeed.921600.upload.speed=921600
|
|
widora-air.menu.UploadSpeed.115200=115200
|
|
widora-air.menu.UploadSpeed.115200.upload.speed=115200
|
|
widora-air.menu.UploadSpeed.256000.windows=256000
|
|
widora-air.menu.UploadSpeed.256000.upload.speed=256000
|
|
widora-air.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
widora-air.menu.UploadSpeed.230400=230400
|
|
widora-air.menu.UploadSpeed.230400.upload.speed=230400
|
|
widora-air.menu.UploadSpeed.460800.linux=460800
|
|
widora-air.menu.UploadSpeed.460800.macosx=460800
|
|
widora-air.menu.UploadSpeed.460800.upload.speed=460800
|
|
widora-air.menu.UploadSpeed.512000.windows=512000
|
|
widora-air.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
widora-air.menu.DebugLevel.none=None
|
|
widora-air.menu.DebugLevel.none.build.code_debug=0
|
|
widora-air.menu.DebugLevel.error=Error
|
|
widora-air.menu.DebugLevel.error.build.code_debug=1
|
|
widora-air.menu.DebugLevel.warn=Warn
|
|
widora-air.menu.DebugLevel.warn.build.code_debug=2
|
|
widora-air.menu.DebugLevel.info=Info
|
|
widora-air.menu.DebugLevel.info.build.code_debug=3
|
|
widora-air.menu.DebugLevel.debug=Debug
|
|
widora-air.menu.DebugLevel.debug.build.code_debug=4
|
|
widora-air.menu.DebugLevel.verbose=Verbose
|
|
widora-air.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
widora-air.menu.EraseFlash.none=Disabled
|
|
widora-air.menu.EraseFlash.none.upload.erase_cmd=
|
|
widora-air.menu.EraseFlash.all=Enabled
|
|
widora-air.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp320.name=Electronic SweetPeas - ESP320
|
|
|
|
esp320.bootloader.tool=esptool_py
|
|
esp320.bootloader.tool.default=esptool_py
|
|
|
|
esp320.upload.tool=esptool_py
|
|
esp320.upload.tool.default=esptool_py
|
|
esp320.upload.tool.network=esp_ota
|
|
|
|
esp320.upload.maximum_size=1310720
|
|
esp320.upload.maximum_data_size=327680
|
|
esp320.upload.flags=
|
|
esp320.upload.extra_flags=
|
|
|
|
esp320.serial.disableDTR=true
|
|
esp320.serial.disableRTS=true
|
|
|
|
esp320.build.tarch=xtensa
|
|
esp320.build.bootloader_addr=0x1000
|
|
esp320.build.target=esp32
|
|
esp320.build.mcu=esp32
|
|
esp320.build.core=esp32
|
|
esp320.build.variant=esp320
|
|
esp320.build.board=ESP320
|
|
|
|
esp320.build.f_cpu=240000000L
|
|
esp320.build.flash_mode=qio
|
|
esp320.build.flash_size=4MB
|
|
esp320.build.boot=dio
|
|
esp320.build.partitions=default
|
|
esp320.build.defines=
|
|
|
|
esp320.menu.FlashFreq.80=80MHz
|
|
esp320.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp320.menu.FlashFreq.40=40MHz
|
|
esp320.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp320.menu.UploadSpeed.921600=921600
|
|
esp320.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp320.menu.UploadSpeed.115200=115200
|
|
esp320.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp320.menu.UploadSpeed.256000.windows=256000
|
|
esp320.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp320.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp320.menu.UploadSpeed.230400=230400
|
|
esp320.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp320.menu.UploadSpeed.460800.linux=460800
|
|
esp320.menu.UploadSpeed.460800.macosx=460800
|
|
esp320.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp320.menu.UploadSpeed.512000.windows=512000
|
|
esp320.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp320.menu.DebugLevel.none=None
|
|
esp320.menu.DebugLevel.none.build.code_debug=0
|
|
esp320.menu.DebugLevel.error=Error
|
|
esp320.menu.DebugLevel.error.build.code_debug=1
|
|
esp320.menu.DebugLevel.warn=Warn
|
|
esp320.menu.DebugLevel.warn.build.code_debug=2
|
|
esp320.menu.DebugLevel.info=Info
|
|
esp320.menu.DebugLevel.info.build.code_debug=3
|
|
esp320.menu.DebugLevel.debug=Debug
|
|
esp320.menu.DebugLevel.debug.build.code_debug=4
|
|
esp320.menu.DebugLevel.verbose=Verbose
|
|
esp320.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp320.menu.EraseFlash.none=Disabled
|
|
esp320.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp320.menu.EraseFlash.all=Enabled
|
|
esp320.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
nano32.name=Nano32
|
|
|
|
nano32.bootloader.tool=esptool_py
|
|
nano32.bootloader.tool.default=esptool_py
|
|
|
|
nano32.upload.tool=esptool_py
|
|
nano32.upload.tool.default=esptool_py
|
|
nano32.upload.tool.network=esp_ota
|
|
|
|
nano32.upload.maximum_size=1310720
|
|
nano32.upload.maximum_data_size=327680
|
|
nano32.upload.flags=
|
|
nano32.upload.extra_flags=
|
|
|
|
nano32.serial.disableDTR=true
|
|
nano32.serial.disableRTS=true
|
|
|
|
nano32.build.tarch=xtensa
|
|
nano32.build.bootloader_addr=0x1000
|
|
nano32.build.target=esp32
|
|
nano32.build.mcu=esp32
|
|
nano32.build.core=esp32
|
|
nano32.build.variant=nano32
|
|
nano32.build.board=NANO32
|
|
|
|
nano32.build.f_cpu=240000000L
|
|
nano32.build.flash_mode=dio
|
|
nano32.build.flash_size=4MB
|
|
nano32.build.boot=dio
|
|
nano32.build.partitions=default
|
|
nano32.build.defines=
|
|
|
|
nano32.menu.FlashFreq.80=80MHz
|
|
nano32.menu.FlashFreq.80.build.flash_freq=80m
|
|
nano32.menu.FlashFreq.40=40MHz
|
|
nano32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
nano32.menu.UploadSpeed.921600=921600
|
|
nano32.menu.UploadSpeed.921600.upload.speed=921600
|
|
nano32.menu.UploadSpeed.115200=115200
|
|
nano32.menu.UploadSpeed.115200.upload.speed=115200
|
|
nano32.menu.UploadSpeed.256000.windows=256000
|
|
nano32.menu.UploadSpeed.256000.upload.speed=256000
|
|
nano32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
nano32.menu.UploadSpeed.230400=230400
|
|
nano32.menu.UploadSpeed.230400.upload.speed=230400
|
|
nano32.menu.UploadSpeed.460800.linux=460800
|
|
nano32.menu.UploadSpeed.460800.macosx=460800
|
|
nano32.menu.UploadSpeed.460800.upload.speed=460800
|
|
nano32.menu.UploadSpeed.512000.windows=512000
|
|
nano32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
nano32.menu.DebugLevel.none=None
|
|
nano32.menu.DebugLevel.none.build.code_debug=0
|
|
nano32.menu.DebugLevel.error=Error
|
|
nano32.menu.DebugLevel.error.build.code_debug=1
|
|
nano32.menu.DebugLevel.warn=Warn
|
|
nano32.menu.DebugLevel.warn.build.code_debug=2
|
|
nano32.menu.DebugLevel.info=Info
|
|
nano32.menu.DebugLevel.info.build.code_debug=3
|
|
nano32.menu.DebugLevel.debug=Debug
|
|
nano32.menu.DebugLevel.debug.build.code_debug=4
|
|
nano32.menu.DebugLevel.verbose=Verbose
|
|
nano32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
nano32.menu.EraseFlash.none=Disabled
|
|
nano32.menu.EraseFlash.none.upload.erase_cmd=
|
|
nano32.menu.EraseFlash.all=Enabled
|
|
nano32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
d32.name=LOLIN D32
|
|
|
|
d32.bootloader.tool=esptool_py
|
|
d32.bootloader.tool.default=esptool_py
|
|
|
|
d32.upload.tool=esptool_py
|
|
d32.upload.tool.default=esptool_py
|
|
d32.upload.tool.network=esp_ota
|
|
|
|
d32.upload.maximum_size=1310720
|
|
d32.upload.maximum_data_size=327680
|
|
d32.upload.flags=
|
|
d32.upload.extra_flags=
|
|
|
|
d32.serial.disableDTR=true
|
|
d32.serial.disableRTS=true
|
|
|
|
d32.build.tarch=xtensa
|
|
d32.build.bootloader_addr=0x1000
|
|
d32.build.target=esp32
|
|
d32.build.mcu=esp32
|
|
d32.build.core=esp32
|
|
d32.build.variant=d32
|
|
d32.build.board=LOLIN_D32
|
|
|
|
d32.build.f_cpu=240000000L
|
|
d32.build.flash_size=4MB
|
|
d32.build.flash_freq=40m
|
|
d32.build.flash_mode=dio
|
|
d32.build.boot=dio
|
|
d32.build.partitions=default
|
|
d32.build.defines=
|
|
|
|
d32.menu.PartitionScheme.default=Default
|
|
d32.menu.PartitionScheme.default.build.partitions=default
|
|
d32.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
|
|
d32.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
d32.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
d32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
d32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
d32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
d32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
d32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
d32.menu.FlashFreq.80=80MHz
|
|
d32.menu.FlashFreq.80.build.flash_freq=80m
|
|
d32.menu.FlashFreq.40=40MHz
|
|
d32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
d32.menu.UploadSpeed.921600=921600
|
|
d32.menu.UploadSpeed.921600.upload.speed=921600
|
|
d32.menu.UploadSpeed.115200=115200
|
|
d32.menu.UploadSpeed.115200.upload.speed=115200
|
|
d32.menu.UploadSpeed.256000.windows=256000
|
|
d32.menu.UploadSpeed.256000.upload.speed=256000
|
|
d32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
d32.menu.UploadSpeed.230400=230400
|
|
d32.menu.UploadSpeed.230400.upload.speed=230400
|
|
d32.menu.UploadSpeed.460800.linux=460800
|
|
d32.menu.UploadSpeed.460800.macosx=460800
|
|
d32.menu.UploadSpeed.460800.upload.speed=460800
|
|
d32.menu.UploadSpeed.512000.windows=512000
|
|
d32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
d32.menu.DebugLevel.none=None
|
|
d32.menu.DebugLevel.none.build.code_debug=0
|
|
d32.menu.DebugLevel.error=Error
|
|
d32.menu.DebugLevel.error.build.code_debug=1
|
|
d32.menu.DebugLevel.warn=Warn
|
|
d32.menu.DebugLevel.warn.build.code_debug=2
|
|
d32.menu.DebugLevel.info=Info
|
|
d32.menu.DebugLevel.info.build.code_debug=3
|
|
d32.menu.DebugLevel.debug=Debug
|
|
d32.menu.DebugLevel.debug.build.code_debug=4
|
|
d32.menu.DebugLevel.verbose=Verbose
|
|
d32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
d32.menu.EraseFlash.none=Disabled
|
|
d32.menu.EraseFlash.none.upload.erase_cmd=
|
|
d32.menu.EraseFlash.all=Enabled
|
|
d32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
d32_pro.name=LOLIN D32 PRO
|
|
|
|
d32_pro.bootloader.tool=esptool_py
|
|
d32_pro.bootloader.tool.default=esptool_py
|
|
|
|
d32_pro.upload.tool=esptool_py
|
|
d32_pro.upload.tool.default=esptool_py
|
|
d32_pro.upload.tool.network=esp_ota
|
|
|
|
d32_pro.upload.maximum_size=1310720
|
|
d32_pro.upload.maximum_data_size=327680
|
|
d32_pro.upload.flags=
|
|
d32_pro.upload.extra_flags=
|
|
|
|
d32_pro.serial.disableDTR=true
|
|
d32_pro.serial.disableRTS=true
|
|
|
|
d32_pro.build.tarch=xtensa
|
|
d32_pro.build.bootloader_addr=0x1000
|
|
d32_pro.build.target=esp32
|
|
d32_pro.build.mcu=esp32
|
|
d32_pro.build.core=esp32
|
|
d32_pro.build.variant=d32_pro
|
|
d32_pro.build.board=LOLIN_D32_PRO
|
|
|
|
d32_pro.build.f_cpu=240000000L
|
|
d32_pro.build.flash_size=4MB
|
|
d32_pro.build.flash_freq=40m
|
|
d32_pro.build.flash_mode=dio
|
|
d32_pro.build.boot=dio
|
|
d32_pro.build.partitions=default
|
|
d32_pro.build.defines=
|
|
|
|
d32_pro.menu.PSRAM.disabled=Disabled
|
|
d32_pro.menu.PSRAM.disabled.build.defines=
|
|
d32_pro.menu.PSRAM.disabled.build.extra_libs=
|
|
d32_pro.menu.PSRAM.enabled=Enabled
|
|
d32_pro.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
d32_pro.menu.PSRAM.enabled.build.extra_libs=
|
|
|
|
d32_pro.menu.PartitionScheme.default=Default
|
|
d32_pro.menu.PartitionScheme.default.build.partitions=default
|
|
d32_pro.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
|
|
d32_pro.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
d32_pro.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
d32_pro.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
d32_pro.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
d32_pro.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
d32_pro.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
d32_pro.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
d32_pro.menu.FlashFreq.80=80MHz
|
|
d32_pro.menu.FlashFreq.80.build.flash_freq=80m
|
|
d32_pro.menu.FlashFreq.40=40MHz
|
|
d32_pro.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
d32_pro.menu.UploadSpeed.921600=921600
|
|
d32_pro.menu.UploadSpeed.921600.upload.speed=921600
|
|
d32_pro.menu.UploadSpeed.115200=115200
|
|
d32_pro.menu.UploadSpeed.115200.upload.speed=115200
|
|
d32_pro.menu.UploadSpeed.256000.windows=256000
|
|
d32_pro.menu.UploadSpeed.256000.upload.speed=256000
|
|
d32_pro.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
d32_pro.menu.UploadSpeed.230400=230400
|
|
d32_pro.menu.UploadSpeed.230400.upload.speed=230400
|
|
d32_pro.menu.UploadSpeed.460800.linux=460800
|
|
d32_pro.menu.UploadSpeed.460800.macosx=460800
|
|
d32_pro.menu.UploadSpeed.460800.upload.speed=460800
|
|
d32_pro.menu.UploadSpeed.512000.windows=512000
|
|
d32_pro.menu.UploadSpeed.512000.upload.speed=512000
|
|
d32_pro.menu.UploadSpeed.1500000=1500000
|
|
d32_pro.menu.UploadSpeed.1500000.upload.speed=1500000
|
|
|
|
d32_pro.menu.DebugLevel.none=None
|
|
d32_pro.menu.DebugLevel.none.build.code_debug=0
|
|
d32_pro.menu.DebugLevel.error=Error
|
|
d32_pro.menu.DebugLevel.error.build.code_debug=1
|
|
d32_pro.menu.DebugLevel.warn=Warn
|
|
d32_pro.menu.DebugLevel.warn.build.code_debug=2
|
|
d32_pro.menu.DebugLevel.info=Info
|
|
d32_pro.menu.DebugLevel.info.build.code_debug=3
|
|
d32_pro.menu.DebugLevel.debug=Debug
|
|
d32_pro.menu.DebugLevel.debug.build.code_debug=4
|
|
d32_pro.menu.DebugLevel.verbose=Verbose
|
|
d32_pro.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
d32_pro.menu.EraseFlash.none=Disabled
|
|
d32_pro.menu.EraseFlash.none.upload.erase_cmd=
|
|
d32_pro.menu.EraseFlash.all=Enabled
|
|
d32_pro.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
lolin_c3_mini.name=LOLIN C3 Mini
|
|
|
|
lolin_c3_mini.bootloader.tool=esptool_py
|
|
lolin_c3_mini.bootloader.tool.default=esptool_py
|
|
|
|
lolin_c3_mini.upload.tool=esptool_py
|
|
lolin_c3_mini.upload.tool.default=esptool_py
|
|
lolin_c3_mini.upload.tool.network=esp_ota
|
|
|
|
lolin_c3_mini.upload.maximum_size=1310720
|
|
lolin_c3_mini.upload.maximum_data_size=327680
|
|
lolin_c3_mini.upload.flags=
|
|
lolin_c3_mini.upload.extra_flags=
|
|
lolin_c3_mini.upload.use_1200bps_touch=false
|
|
lolin_c3_mini.upload.wait_for_upload_port=false
|
|
|
|
lolin_c3_mini.serial.disableDTR=true
|
|
lolin_c3_mini.serial.disableRTS=true
|
|
|
|
lolin_c3_mini.build.tarch=riscv32
|
|
lolin_c3_mini.build.target=esp
|
|
lolin_c3_mini.build.mcu=esp32c3
|
|
lolin_c3_mini.build.core=esp32
|
|
lolin_c3_mini.build.variant=lolin_c3_mini
|
|
lolin_c3_mini.build.board=LOLIN_C3_MINI
|
|
lolin_c3_mini.build.bootloader_addr=0x0
|
|
|
|
lolin_c3_mini.build.cdc_on_boot=1
|
|
lolin_c3_mini.build.f_cpu=160000000L
|
|
lolin_c3_mini.build.flash_size=4MB
|
|
lolin_c3_mini.build.flash_freq=80m
|
|
lolin_c3_mini.build.flash_mode=dio
|
|
lolin_c3_mini.build.boot=qio
|
|
lolin_c3_mini.build.partitions=default
|
|
lolin_c3_mini.build.defines=
|
|
|
|
lolin_c3_mini.menu.CDCOnBoot.default=Enabled
|
|
lolin_c3_mini.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
lolin_c3_mini.menu.CDCOnBoot.dis_cdc=Disabled
|
|
lolin_c3_mini.menu.CDCOnBoot.dis_cdc.build.cdc_on_boot=0
|
|
|
|
lolin_c3_mini.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
lolin_c3_mini.menu.PartitionScheme.default.build.partitions=default
|
|
lolin_c3_mini.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
lolin_c3_mini.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
lolin_c3_mini.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
lolin_c3_mini.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
lolin_c3_mini.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
lolin_c3_mini.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
lolin_c3_mini.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
lolin_c3_mini.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
lolin_c3_mini.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
lolin_c3_mini.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
lolin_c3_mini.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
lolin_c3_mini.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
lolin_c3_mini.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
lolin_c3_mini.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
lolin_c3_mini.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
lolin_c3_mini.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
lolin_c3_mini.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
|
|
|
|
lolin_c3_mini.menu.CPUFreq.160=160MHz (WiFi)
|
|
lolin_c3_mini.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
lolin_c3_mini.menu.CPUFreq.80=80MHz (WiFi)
|
|
lolin_c3_mini.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
lolin_c3_mini.menu.CPUFreq.40=40MHz
|
|
lolin_c3_mini.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
lolin_c3_mini.menu.CPUFreq.20=20MHz
|
|
lolin_c3_mini.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
lolin_c3_mini.menu.CPUFreq.10=10MHz
|
|
lolin_c3_mini.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
|
|
|
|
lolin_c3_mini.menu.FlashFreq.80=80MHz
|
|
lolin_c3_mini.menu.FlashFreq.80.build.flash_freq=80m
|
|
lolin_c3_mini.menu.FlashFreq.40=40MHz
|
|
lolin_c3_mini.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
lolin_c3_mini.menu.UploadSpeed.921600=921600
|
|
lolin_c3_mini.menu.UploadSpeed.921600.upload.speed=921600
|
|
lolin_c3_mini.menu.UploadSpeed.115200=115200
|
|
lolin_c3_mini.menu.UploadSpeed.115200.upload.speed=115200
|
|
lolin_c3_mini.menu.UploadSpeed.256000.windows=256000
|
|
lolin_c3_mini.menu.UploadSpeed.256000.upload.speed=256000
|
|
lolin_c3_mini.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
lolin_c3_mini.menu.UploadSpeed.230400=230400
|
|
lolin_c3_mini.menu.UploadSpeed.230400.upload.speed=230400
|
|
lolin_c3_mini.menu.UploadSpeed.460800.linux=460800
|
|
lolin_c3_mini.menu.UploadSpeed.460800.macosx=460800
|
|
lolin_c3_mini.menu.UploadSpeed.460800.upload.speed=460800
|
|
lolin_c3_mini.menu.UploadSpeed.512000.windows=512000
|
|
lolin_c3_mini.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
lolin_c3_mini.menu.DebugLevel.none=None
|
|
lolin_c3_mini.menu.DebugLevel.none.build.code_debug=0
|
|
lolin_c3_mini.menu.DebugLevel.error=Error
|
|
lolin_c3_mini.menu.DebugLevel.error.build.code_debug=1
|
|
lolin_c3_mini.menu.DebugLevel.warn=Warn
|
|
lolin_c3_mini.menu.DebugLevel.warn.build.code_debug=2
|
|
lolin_c3_mini.menu.DebugLevel.info=Info
|
|
lolin_c3_mini.menu.DebugLevel.info.build.code_debug=3
|
|
lolin_c3_mini.menu.DebugLevel.debug=Debug
|
|
lolin_c3_mini.menu.DebugLevel.debug.build.code_debug=4
|
|
lolin_c3_mini.menu.DebugLevel.verbose=Verbose
|
|
lolin_c3_mini.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lolin_c3_mini.menu.EraseFlash.none=Disabled
|
|
lolin_c3_mini.menu.EraseFlash.none.upload.erase_cmd=
|
|
lolin_c3_mini.menu.EraseFlash.all=Enabled
|
|
lolin_c3_mini.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
lolin_c3_pico.name=LOLIN C3 Pico
|
|
|
|
lolin_c3_pico.bootloader.tool=esptool_py
|
|
lolin_c3_pico.bootloader.tool.default=esptool_py
|
|
|
|
lolin_c3_pico.upload.tool=esptool_py
|
|
lolin_c3_pico.upload.tool.default=esptool_py
|
|
lolin_c3_pico.upload.tool.network=esp_ota
|
|
|
|
lolin_c3_pico.upload.maximum_size=1310720
|
|
lolin_c3_pico.upload.maximum_data_size=327680
|
|
lolin_c3_pico.upload.flags=
|
|
lolin_c3_pico.upload.extra_flags=
|
|
lolin_c3_pico.upload.use_1200bps_touch=false
|
|
lolin_c3_pico.upload.wait_for_upload_port=false
|
|
|
|
lolin_c3_pico.serial.disableDTR=true
|
|
lolin_c3_pico.serial.disableRTS=true
|
|
|
|
lolin_c3_pico.build.tarch=riscv32
|
|
lolin_c3_pico.build.target=esp
|
|
lolin_c3_pico.build.mcu=esp32c3
|
|
lolin_c3_pico.build.core=esp32
|
|
lolin_c3_pico.build.variant=lolin_c3_pico
|
|
lolin_c3_pico.build.board=LOLIN_C3_PICO
|
|
lolin_c3_pico.build.bootloader_addr=0x0
|
|
|
|
lolin_c3_pico.build.cdc_on_boot=1
|
|
lolin_c3_pico.build.f_cpu=160000000L
|
|
lolin_c3_pico.build.flash_size=4MB
|
|
lolin_c3_pico.build.flash_freq=80m
|
|
lolin_c3_pico.build.flash_mode=dio
|
|
lolin_c3_pico.build.boot=qio
|
|
lolin_c3_pico.build.partitions=default
|
|
lolin_c3_pico.build.defines=
|
|
|
|
lolin_c3_pico.menu.CDCOnBoot.default=Enabled
|
|
lolin_c3_pico.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
lolin_c3_pico.menu.CDCOnBoot.dis_cdc=Disabled
|
|
lolin_c3_pico.menu.CDCOnBoot.dis_cdc.build.cdc_on_boot=0
|
|
|
|
lolin_c3_pico.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
lolin_c3_pico.menu.PartitionScheme.default.build.partitions=default
|
|
lolin_c3_pico.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
lolin_c3_pico.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
lolin_c3_pico.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
lolin_c3_pico.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
lolin_c3_pico.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
lolin_c3_pico.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
lolin_c3_pico.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
lolin_c3_pico.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
lolin_c3_pico.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
lolin_c3_pico.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
lolin_c3_pico.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
lolin_c3_pico.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
lolin_c3_pico.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
lolin_c3_pico.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
lolin_c3_pico.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
lolin_c3_pico.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
lolin_c3_pico.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
|
|
lolin_c3_pico.menu.CPUFreq.160=160MHz (WiFi)
|
|
lolin_c3_pico.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
lolin_c3_pico.menu.CPUFreq.80=80MHz (WiFi)
|
|
lolin_c3_pico.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
lolin_c3_pico.menu.CPUFreq.40=40MHz
|
|
lolin_c3_pico.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
lolin_c3_pico.menu.CPUFreq.20=20MHz
|
|
lolin_c3_pico.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
lolin_c3_pico.menu.CPUFreq.10=10MHz
|
|
lolin_c3_pico.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
lolin_c3_pico.menu.FlashFreq.80=80MHz
|
|
lolin_c3_pico.menu.FlashFreq.80.build.flash_freq=80m
|
|
lolin_c3_pico.menu.FlashFreq.40=40MHz
|
|
lolin_c3_pico.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
lolin_c3_pico.menu.UploadSpeed.921600=921600
|
|
lolin_c3_pico.menu.UploadSpeed.921600.upload.speed=921600
|
|
lolin_c3_pico.menu.UploadSpeed.115200=115200
|
|
lolin_c3_pico.menu.UploadSpeed.115200.upload.speed=115200
|
|
lolin_c3_pico.menu.UploadSpeed.256000.windows=256000
|
|
lolin_c3_pico.menu.UploadSpeed.256000.upload.speed=256000
|
|
lolin_c3_pico.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
lolin_c3_pico.menu.UploadSpeed.230400=230400
|
|
lolin_c3_pico.menu.UploadSpeed.230400.upload.speed=230400
|
|
lolin_c3_pico.menu.UploadSpeed.460800.linux=460800
|
|
lolin_c3_pico.menu.UploadSpeed.460800.macosx=460800
|
|
lolin_c3_pico.menu.UploadSpeed.460800.upload.speed=460800
|
|
lolin_c3_pico.menu.UploadSpeed.512000.windows=512000
|
|
lolin_c3_pico.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
lolin_c3_pico.menu.DebugLevel.none=None
|
|
lolin_c3_pico.menu.DebugLevel.none.build.code_debug=0
|
|
lolin_c3_pico.menu.DebugLevel.error=Error
|
|
lolin_c3_pico.menu.DebugLevel.error.build.code_debug=1
|
|
lolin_c3_pico.menu.DebugLevel.warn=Warn
|
|
lolin_c3_pico.menu.DebugLevel.warn.build.code_debug=2
|
|
lolin_c3_pico.menu.DebugLevel.info=Info
|
|
lolin_c3_pico.menu.DebugLevel.info.build.code_debug=3
|
|
lolin_c3_pico.menu.DebugLevel.debug=Debug
|
|
lolin_c3_pico.menu.DebugLevel.debug.build.code_debug=4
|
|
lolin_c3_pico.menu.DebugLevel.verbose=Verbose
|
|
lolin_c3_pico.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lolin_c3_pico.menu.EraseFlash.none=Disabled
|
|
lolin_c3_pico.menu.EraseFlash.none.upload.erase_cmd=
|
|
lolin_c3_pico.menu.EraseFlash.all=Enabled
|
|
lolin_c3_pico.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
lolin_s2_mini.name=LOLIN S2 Mini
|
|
lolin_s2_mini.vid.0=0x303a
|
|
lolin_s2_mini.pid.0=0x80C2
|
|
|
|
lolin_s2_mini.bootloader.tool=esptool_py
|
|
lolin_s2_mini.bootloader.tool.default=esptool_py
|
|
|
|
lolin_s2_mini.upload.tool=esptool_py
|
|
lolin_s2_mini.upload.tool.default=esptool_py
|
|
lolin_s2_mini.upload.tool.network=esp_ota
|
|
|
|
lolin_s2_mini.upload.maximum_size=1310720
|
|
lolin_s2_mini.upload.maximum_data_size=327680
|
|
lolin_s2_mini.upload.flags=
|
|
lolin_s2_mini.upload.extra_flags=
|
|
lolin_s2_mini.upload.use_1200bps_touch=true
|
|
lolin_s2_mini.upload.wait_for_upload_port=true
|
|
lolin_s2_mini.upload.speed=921600
|
|
|
|
lolin_s2_mini.serial.disableDTR=false
|
|
lolin_s2_mini.serial.disableRTS=false
|
|
|
|
lolin_s2_mini.build.tarch=xtensa
|
|
lolin_s2_mini.build.bootloader_addr=0x1000
|
|
lolin_s2_mini.build.target=esp32s2
|
|
lolin_s2_mini.build.mcu=esp32s2
|
|
lolin_s2_mini.build.core=esp32
|
|
lolin_s2_mini.build.variant=lolin_s2_mini
|
|
lolin_s2_mini.build.board=LOLIN_S2_MINI
|
|
|
|
lolin_s2_mini.build.cdc_on_boot=1
|
|
lolin_s2_mini.build.msc_on_boot=1
|
|
lolin_s2_mini.build.dfu_on_boot=1
|
|
lolin_s2_mini.build.f_cpu=240000000L
|
|
lolin_s2_mini.build.flash_size=4MB
|
|
lolin_s2_mini.build.flash_freq=80m
|
|
lolin_s2_mini.build.flash_mode=dio
|
|
lolin_s2_mini.build.boot=qio
|
|
lolin_s2_mini.build.partitions=default
|
|
lolin_s2_mini.build.defines=
|
|
|
|
lolin_s2_mini.build.defines=-DBOARD_HAS_PSRAM
|
|
|
|
lolin_s2_mini.menu.CDCOnBoot.default=Enabled
|
|
lolin_s2_mini.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
lolin_s2_mini.menu.CDCOnBoot.dis_cdc=Disabled
|
|
lolin_s2_mini.menu.CDCOnBoot.dis_cdc.build.cdc_on_boot=0
|
|
|
|
lolin_s2_mini.menu.MSCOnBoot.default=Disabled
|
|
lolin_s2_mini.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
lolin_s2_mini.menu.MSCOnBoot.msc=Enabled
|
|
lolin_s2_mini.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
lolin_s2_mini.menu.DFUOnBoot.default=Disabled
|
|
lolin_s2_mini.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
lolin_s2_mini.menu.DFUOnBoot.dfu=Enabled
|
|
lolin_s2_mini.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
lolin_s2_mini.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
lolin_s2_mini.menu.PartitionScheme.default.build.partitions=default
|
|
lolin_s2_mini.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
lolin_s2_mini.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
lolin_s2_mini.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
lolin_s2_mini.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
lolin_s2_mini.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
lolin_s2_mini.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
lolin_s2_mini.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
lolin_s2_mini.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
lolin_s2_mini.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
lolin_s2_mini.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
lolin_s2_mini.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
lolin_s2_mini.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
lolin_s2_mini.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
lolin_s2_mini.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
lolin_s2_mini.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
lolin_s2_mini.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
lolin_s2_mini.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
|
|
lolin_s2_mini.menu.DebugLevel.none=None
|
|
lolin_s2_mini.menu.DebugLevel.none.build.code_debug=0
|
|
lolin_s2_mini.menu.DebugLevel.error=Error
|
|
lolin_s2_mini.menu.DebugLevel.error.build.code_debug=1
|
|
lolin_s2_mini.menu.DebugLevel.warn=Warn
|
|
lolin_s2_mini.menu.DebugLevel.warn.build.code_debug=2
|
|
lolin_s2_mini.menu.DebugLevel.info=Info
|
|
lolin_s2_mini.menu.DebugLevel.info.build.code_debug=3
|
|
lolin_s2_mini.menu.DebugLevel.debug=Debug
|
|
lolin_s2_mini.menu.DebugLevel.debug.build.code_debug=4
|
|
lolin_s2_mini.menu.DebugLevel.verbose=Verbose
|
|
lolin_s2_mini.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lolin_s2_mini.menu.EraseFlash.none=Disabled
|
|
lolin_s2_mini.menu.EraseFlash.none.upload.erase_cmd=
|
|
lolin_s2_mini.menu.EraseFlash.all=Enabled
|
|
lolin_s2_mini.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
lolin_s2_pico.name=LOLIN S2 PICO
|
|
lolin_s2_pico.vid.0=0x303a
|
|
lolin_s2_pico.pid.0=0x80C5
|
|
|
|
lolin_s2_pico.bootloader.tool=esptool_py
|
|
lolin_s2_pico.bootloader.tool.default=esptool_py
|
|
|
|
lolin_s2_pico.upload.tool=esptool_py
|
|
lolin_s2_pico.upload.tool.default=esptool_py
|
|
lolin_s2_pico.upload.tool.network=esp_ota
|
|
|
|
lolin_s2_pico.upload.maximum_size=1310720
|
|
lolin_s2_pico.upload.maximum_data_size=327680
|
|
lolin_s2_pico.upload.flags=
|
|
lolin_s2_pico.upload.extra_flags=
|
|
lolin_s2_pico.upload.use_1200bps_touch=true
|
|
lolin_s2_pico.upload.wait_for_upload_port=true
|
|
lolin_s2_pico.upload.speed=921600
|
|
|
|
lolin_s2_pico.serial.disableDTR=false
|
|
lolin_s2_pico.serial.disableRTS=false
|
|
|
|
lolin_s2_pico.build.tarch=xtensa
|
|
lolin_s2_pico.build.bootloader_addr=0x1000
|
|
lolin_s2_pico.build.target=esp32s2
|
|
lolin_s2_pico.build.mcu=esp32s2
|
|
lolin_s2_pico.build.core=esp32
|
|
lolin_s2_pico.build.variant=lolin_s2_pico
|
|
lolin_s2_pico.build.board=LOLIN_S2_PICO
|
|
|
|
lolin_s2_pico.build.cdc_on_boot=1
|
|
lolin_s2_pico.build.msc_on_boot=1
|
|
lolin_s2_pico.build.dfu_on_boot=1
|
|
lolin_s2_pico.build.f_cpu=240000000L
|
|
lolin_s2_pico.build.flash_size=4MB
|
|
lolin_s2_pico.build.flash_freq=80m
|
|
lolin_s2_pico.build.flash_mode=dio
|
|
lolin_s2_pico.build.boot=qio
|
|
lolin_s2_pico.build.partitions=default
|
|
lolin_s2_pico.build.defines=
|
|
|
|
lolin_s2_pico.build.defines=-DBOARD_HAS_PSRAM
|
|
|
|
lolin_s2_pico.menu.CDCOnBoot.default=Enabled
|
|
lolin_s2_pico.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
lolin_s2_pico.menu.CDCOnBoot.dis_cdc=Disabled
|
|
lolin_s2_pico.menu.CDCOnBoot.dis_cdc.build.cdc_on_boot=0
|
|
|
|
lolin_s2_pico.menu.MSCOnBoot.default=Disabled
|
|
lolin_s2_pico.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
lolin_s2_pico.menu.MSCOnBoot.msc=Enabled
|
|
lolin_s2_pico.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
lolin_s2_pico.menu.DFUOnBoot.default=Disabled
|
|
lolin_s2_pico.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
lolin_s2_pico.menu.DFUOnBoot.dfu=Enabled
|
|
lolin_s2_pico.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
lolin_s2_pico.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
lolin_s2_pico.menu.PartitionScheme.default.build.partitions=default
|
|
lolin_s2_pico.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
lolin_s2_pico.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
lolin_s2_pico.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
lolin_s2_pico.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
lolin_s2_pico.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
lolin_s2_pico.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
lolin_s2_pico.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
lolin_s2_pico.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
lolin_s2_pico.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
lolin_s2_pico.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
lolin_s2_pico.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
lolin_s2_pico.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
lolin_s2_pico.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
lolin_s2_pico.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
lolin_s2_pico.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
lolin_s2_pico.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
lolin_s2_pico.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
|
|
lolin_s2_pico.menu.DebugLevel.none=None
|
|
lolin_s2_pico.menu.DebugLevel.none.build.code_debug=0
|
|
lolin_s2_pico.menu.DebugLevel.error=Error
|
|
lolin_s2_pico.menu.DebugLevel.error.build.code_debug=1
|
|
lolin_s2_pico.menu.DebugLevel.warn=Warn
|
|
lolin_s2_pico.menu.DebugLevel.warn.build.code_debug=2
|
|
lolin_s2_pico.menu.DebugLevel.info=Info
|
|
lolin_s2_pico.menu.DebugLevel.info.build.code_debug=3
|
|
lolin_s2_pico.menu.DebugLevel.debug=Debug
|
|
lolin_s2_pico.menu.DebugLevel.debug.build.code_debug=4
|
|
lolin_s2_pico.menu.DebugLevel.verbose=Verbose
|
|
lolin_s2_pico.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lolin_s2_pico.menu.EraseFlash.none=Disabled
|
|
lolin_s2_pico.menu.EraseFlash.none.upload.erase_cmd=
|
|
lolin_s2_pico.menu.EraseFlash.all=Enabled
|
|
lolin_s2_pico.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
lolin_s3.name=LOLIN S3
|
|
|
|
lolin_s3.bootloader.tool=esptool_py
|
|
lolin_s3.bootloader.tool.default=esptool_py
|
|
|
|
lolin_s3.upload.tool=esptool_py
|
|
lolin_s3.upload.tool.default=esptool_py
|
|
lolin_s3.upload.tool.network=esp_ota
|
|
|
|
lolin_s3.upload.maximum_size=1310720
|
|
lolin_s3.upload.maximum_data_size=327680
|
|
lolin_s3.upload.flags=
|
|
lolin_s3.upload.extra_flags=
|
|
lolin_s3.upload.use_1200bps_touch=false
|
|
lolin_s3.upload.wait_for_upload_port=false
|
|
|
|
lolin_s3.serial.disableDTR=false
|
|
lolin_s3.serial.disableRTS=false
|
|
|
|
lolin_s3.build.tarch=xtensa
|
|
lolin_s3.build.bootloader_addr=0x0
|
|
lolin_s3.build.target=esp32s3
|
|
lolin_s3.build.mcu=esp32s3
|
|
lolin_s3.build.core=esp32
|
|
lolin_s3.build.variant=lolin_s3
|
|
lolin_s3.build.board=LOLIN_S3
|
|
|
|
lolin_s3.build.usb_mode=1
|
|
lolin_s3.build.cdc_on_boot=0
|
|
lolin_s3.build.msc_on_boot=0
|
|
lolin_s3.build.dfu_on_boot=0
|
|
lolin_s3.build.f_cpu=240000000L
|
|
lolin_s3.build.flash_size=16MB
|
|
lolin_s3.build.flash_freq=80m
|
|
lolin_s3.build.flash_mode=dio
|
|
lolin_s3.build.boot=qio
|
|
lolin_s3.build.boot_freq=80m
|
|
lolin_s3.build.partitions=default
|
|
lolin_s3.build.defines=-DBOARD_HAS_PSRAM
|
|
lolin_s3.build.loop_core=
|
|
lolin_s3.build.event_core=
|
|
lolin_s3.build.psram_type=opi
|
|
lolin_s3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
lolin_s3.menu.FlashMode.qio=QIO 80MHz
|
|
lolin_s3.menu.FlashMode.qio.build.flash_mode=dio
|
|
lolin_s3.menu.FlashMode.qio.build.boot=qio
|
|
lolin_s3.menu.FlashMode.qio.build.boot_freq=80m
|
|
lolin_s3.menu.FlashMode.qio.build.flash_freq=80m
|
|
lolin_s3.menu.FlashMode.qio120=QIO 120MHz
|
|
lolin_s3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
lolin_s3.menu.FlashMode.qio120.build.boot=qio
|
|
lolin_s3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
lolin_s3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
|
|
lolin_s3.menu.LoopCore.1=Core 1
|
|
lolin_s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
lolin_s3.menu.LoopCore.0=Core 0
|
|
lolin_s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
lolin_s3.menu.EventsCore.1=Core 1
|
|
lolin_s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
lolin_s3.menu.EventsCore.0=Core 0
|
|
lolin_s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
lolin_s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
lolin_s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
lolin_s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
lolin_s3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
lolin_s3.menu.CDCOnBoot.default=Disabled
|
|
lolin_s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
lolin_s3.menu.CDCOnBoot.cdc=Enabled
|
|
lolin_s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
lolin_s3.menu.MSCOnBoot.default=Disabled
|
|
lolin_s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
lolin_s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
lolin_s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
lolin_s3.menu.DFUOnBoot.default=Disabled
|
|
lolin_s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
lolin_s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
lolin_s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
lolin_s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
lolin_s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
lolin_s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
lolin_s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
lolin_s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
lolin_s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
lolin_s3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
lolin_s3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
lolin_s3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
lolin_s3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
lolin_s3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
lolin_s3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
lolin_s3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
lolin_s3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
lolin_s3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
lolin_s3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
lolin_s3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
lolin_s3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
lolin_s3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
lolin_s3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
lolin_s3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
lolin_s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
lolin_s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
lolin_s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
lolin_s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
lolin_s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
lolin_s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
lolin_s3.menu.CPUFreq.40=40MHz
|
|
lolin_s3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
lolin_s3.menu.CPUFreq.20=20MHz
|
|
lolin_s3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
lolin_s3.menu.CPUFreq.10=10MHz
|
|
lolin_s3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
lolin_s3.menu.UploadSpeed.921600=921600
|
|
lolin_s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
lolin_s3.menu.UploadSpeed.115200=115200
|
|
lolin_s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
lolin_s3.menu.UploadSpeed.256000.windows=256000
|
|
lolin_s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
lolin_s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
lolin_s3.menu.UploadSpeed.230400=230400
|
|
lolin_s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
lolin_s3.menu.UploadSpeed.460800.linux=460800
|
|
lolin_s3.menu.UploadSpeed.460800.macosx=460800
|
|
lolin_s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
lolin_s3.menu.UploadSpeed.512000.windows=512000
|
|
lolin_s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
lolin_s3.menu.DebugLevel.none=None
|
|
lolin_s3.menu.DebugLevel.none.build.code_debug=0
|
|
lolin_s3.menu.DebugLevel.error=Error
|
|
lolin_s3.menu.DebugLevel.error.build.code_debug=1
|
|
lolin_s3.menu.DebugLevel.warn=Warn
|
|
lolin_s3.menu.DebugLevel.warn.build.code_debug=2
|
|
lolin_s3.menu.DebugLevel.info=Info
|
|
lolin_s3.menu.DebugLevel.info.build.code_debug=3
|
|
lolin_s3.menu.DebugLevel.debug=Debug
|
|
lolin_s3.menu.DebugLevel.debug.build.code_debug=4
|
|
lolin_s3.menu.DebugLevel.verbose=Verbose
|
|
lolin_s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lolin_s3.menu.EraseFlash.none=Disabled
|
|
lolin_s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
lolin_s3.menu.EraseFlash.all=Enabled
|
|
lolin_s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
lolin_s3_mini.name=LOLIN S3 Mini
|
|
lolin_s3_mini.vid.0=0x303a
|
|
lolin_s3_mini.pid.0=0x8167
|
|
|
|
lolin_s3_mini.bootloader.tool=esptool_py
|
|
lolin_s3_mini.bootloader.tool.default=esptool_py
|
|
|
|
lolin_s3_mini.upload.tool=esptool_py
|
|
lolin_s3_mini.upload.tool.default=esptool_py
|
|
lolin_s3_mini.upload.tool.network=esp_ota
|
|
|
|
lolin_s3_mini.upload.maximum_size=1310720
|
|
lolin_s3_mini.upload.maximum_data_size=327680
|
|
lolin_s3_mini.upload.flags=
|
|
lolin_s3_mini.upload.extra_flags=
|
|
lolin_s3_mini.upload.use_1200bps_touch=false
|
|
lolin_s3_mini.upload.wait_for_upload_port=false
|
|
|
|
lolin_s3_mini.serial.disableDTR=false
|
|
lolin_s3_mini.serial.disableRTS=false
|
|
|
|
lolin_s3_mini.build.tarch=xtensa
|
|
lolin_s3_mini.build.bootloader_addr=0x0
|
|
lolin_s3_mini.build.target=esp32s3
|
|
lolin_s3_mini.build.mcu=esp32s3
|
|
lolin_s3_mini.build.core=esp32
|
|
lolin_s3_mini.build.variant=lolin_s3_mini
|
|
lolin_s3_mini.build.board=LOLIN_S3_MINI
|
|
|
|
lolin_s3_mini.build.usb_mode=1
|
|
lolin_s3_mini.build.cdc_on_boot=0
|
|
lolin_s3_mini.build.msc_on_boot=0
|
|
lolin_s3_mini.build.dfu_on_boot=0
|
|
lolin_s3_mini.build.f_cpu=240000000L
|
|
lolin_s3_mini.build.flash_size=4MB
|
|
lolin_s3_mini.build.flash_freq=80m
|
|
lolin_s3_mini.build.flash_mode=dio
|
|
lolin_s3_mini.build.boot=qio
|
|
lolin_s3_mini.build.boot_freq=80m
|
|
lolin_s3_mini.build.partitions=default
|
|
lolin_s3_mini.build.defines=-DBOARD_HAS_PSRAM
|
|
lolin_s3_mini.build.loop_core=
|
|
lolin_s3_mini.build.event_core=
|
|
lolin_s3_mini.build.psram_type=qspi
|
|
lolin_s3_mini.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
lolin_s3_mini.menu.FlashMode.qio=QIO 80MHz
|
|
lolin_s3_mini.menu.FlashMode.qio.build.flash_mode=dio
|
|
lolin_s3_mini.menu.FlashMode.qio.build.boot=qio
|
|
lolin_s3_mini.menu.FlashMode.qio.build.boot_freq=80m
|
|
lolin_s3_mini.menu.FlashMode.qio.build.flash_freq=80m
|
|
lolin_s3_mini.menu.FlashMode.qio120=QIO 120MHz
|
|
lolin_s3_mini.menu.FlashMode.qio120.build.flash_mode=dio
|
|
lolin_s3_mini.menu.FlashMode.qio120.build.boot=qio
|
|
lolin_s3_mini.menu.FlashMode.qio120.build.boot_freq=120m
|
|
lolin_s3_mini.menu.FlashMode.qio120.build.flash_freq=80m
|
|
|
|
lolin_s3_mini.menu.LoopCore.1=Core 1
|
|
lolin_s3_mini.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
lolin_s3_mini.menu.LoopCore.0=Core 0
|
|
lolin_s3_mini.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
lolin_s3_mini.menu.EventsCore.1=Core 1
|
|
lolin_s3_mini.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
lolin_s3_mini.menu.EventsCore.0=Core 0
|
|
lolin_s3_mini.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
lolin_s3_mini.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
lolin_s3_mini.menu.USBMode.hwcdc.build.usb_mode=1
|
|
lolin_s3_mini.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
lolin_s3_mini.menu.USBMode.default.build.usb_mode=0
|
|
|
|
lolin_s3_mini.menu.CDCOnBoot.default=Disabled
|
|
lolin_s3_mini.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
lolin_s3_mini.menu.CDCOnBoot.cdc=Enabled
|
|
lolin_s3_mini.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
lolin_s3_mini.menu.MSCOnBoot.default=Disabled
|
|
lolin_s3_mini.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
lolin_s3_mini.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
lolin_s3_mini.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
lolin_s3_mini.menu.DFUOnBoot.default=Disabled
|
|
lolin_s3_mini.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
lolin_s3_mini.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
lolin_s3_mini.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
lolin_s3_mini.menu.UploadMode.default=UART0 / Hardware CDC
|
|
lolin_s3_mini.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
lolin_s3_mini.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
lolin_s3_mini.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
lolin_s3_mini.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
lolin_s3_mini.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
lolin_s3_mini.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
lolin_s3_mini.menu.PartitionScheme.default.build.partitions=default
|
|
lolin_s3_mini.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
lolin_s3_mini.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
lolin_s3_mini.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
lolin_s3_mini.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
lolin_s3_mini.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
lolin_s3_mini.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
lolin_s3_mini.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
lolin_s3_mini.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
lolin_s3_mini.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
lolin_s3_mini.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
lolin_s3_mini.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
lolin_s3_mini.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
lolin_s3_mini.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
lolin_s3_mini.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
lolin_s3_mini.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
lolin_s3_mini.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
lolin_s3_mini.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
lolin_s3_mini.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
lolin_s3_mini.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
lolin_s3_mini.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
lolin_s3_mini.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
lolin_s3_mini.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
lolin_s3_mini.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
lolin_s3_mini.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
lolin_s3_mini.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
lolin_s3_mini.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
|
|
lolin_s3_mini.menu.CPUFreq.240=240MHz (WiFi)
|
|
lolin_s3_mini.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
lolin_s3_mini.menu.CPUFreq.160=160MHz (WiFi)
|
|
lolin_s3_mini.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
lolin_s3_mini.menu.CPUFreq.80=80MHz (WiFi)
|
|
lolin_s3_mini.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
lolin_s3_mini.menu.CPUFreq.40=40MHz
|
|
lolin_s3_mini.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
lolin_s3_mini.menu.CPUFreq.20=20MHz
|
|
lolin_s3_mini.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
lolin_s3_mini.menu.CPUFreq.10=10MHz
|
|
lolin_s3_mini.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
lolin_s3_mini.menu.UploadSpeed.921600=921600
|
|
lolin_s3_mini.menu.UploadSpeed.921600.upload.speed=921600
|
|
lolin_s3_mini.menu.UploadSpeed.115200=115200
|
|
lolin_s3_mini.menu.UploadSpeed.115200.upload.speed=115200
|
|
lolin_s3_mini.menu.UploadSpeed.256000.windows=256000
|
|
lolin_s3_mini.menu.UploadSpeed.256000.upload.speed=256000
|
|
lolin_s3_mini.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
lolin_s3_mini.menu.UploadSpeed.230400=230400
|
|
lolin_s3_mini.menu.UploadSpeed.230400.upload.speed=230400
|
|
lolin_s3_mini.menu.UploadSpeed.460800.linux=460800
|
|
lolin_s3_mini.menu.UploadSpeed.460800.macosx=460800
|
|
lolin_s3_mini.menu.UploadSpeed.460800.upload.speed=460800
|
|
lolin_s3_mini.menu.UploadSpeed.512000.windows=512000
|
|
lolin_s3_mini.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
lolin_s3_mini.menu.DebugLevel.none=None
|
|
lolin_s3_mini.menu.DebugLevel.none.build.code_debug=0
|
|
lolin_s3_mini.menu.DebugLevel.error=Error
|
|
lolin_s3_mini.menu.DebugLevel.error.build.code_debug=1
|
|
lolin_s3_mini.menu.DebugLevel.warn=Warn
|
|
lolin_s3_mini.menu.DebugLevel.warn.build.code_debug=2
|
|
lolin_s3_mini.menu.DebugLevel.info=Info
|
|
lolin_s3_mini.menu.DebugLevel.info.build.code_debug=3
|
|
lolin_s3_mini.menu.DebugLevel.debug=Debug
|
|
lolin_s3_mini.menu.DebugLevel.debug.build.code_debug=4
|
|
lolin_s3_mini.menu.DebugLevel.verbose=Verbose
|
|
lolin_s3_mini.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lolin_s3_mini.menu.EraseFlash.none=Disabled
|
|
lolin_s3_mini.menu.EraseFlash.none.upload.erase_cmd=
|
|
lolin_s3_mini.menu.EraseFlash.all=Enabled
|
|
lolin_s3_mini.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
lolin_s3_mini_pro.name=LOLIN S3 Mini Pro
|
|
lolin_s3_mini_pro.vid.0=0x303a
|
|
lolin_s3_mini_pro.pid.0=0x8216
|
|
|
|
lolin_s3_mini_pro.bootloader.tool=esptool_py
|
|
lolin_s3_mini_pro.bootloader.tool.default=esptool_py
|
|
|
|
lolin_s3_mini_pro.upload.tool=esptool_py
|
|
lolin_s3_mini_pro.upload.tool.default=esptool_py
|
|
lolin_s3_mini_pro.upload.tool.network=esp_ota
|
|
|
|
lolin_s3_mini_pro.upload.maximum_size=1310720
|
|
lolin_s3_mini_pro.upload.maximum_data_size=327680
|
|
lolin_s3_mini_pro.upload.flags=
|
|
lolin_s3_mini_pro.upload.extra_flags=
|
|
lolin_s3_mini_pro.upload.use_1200bps_touch=false
|
|
lolin_s3_mini_pro.upload.wait_for_upload_port=false
|
|
|
|
lolin_s3_mini_pro.serial.disableDTR=false
|
|
lolin_s3_mini_pro.serial.disableRTS=false
|
|
|
|
lolin_s3_mini_pro.build.tarch=xtensa
|
|
lolin_s3_mini_pro.build.bootloader_addr=0x0
|
|
lolin_s3_mini_pro.build.target=esp32s3
|
|
lolin_s3_mini_pro.build.mcu=esp32s3
|
|
lolin_s3_mini_pro.build.core=esp32
|
|
lolin_s3_mini_pro.build.variant=lolin_s3_mini_pro
|
|
lolin_s3_mini_pro.build.board=LOLIN_S3_MINI_PRO
|
|
|
|
lolin_s3_mini_pro.build.usb_mode=1
|
|
lolin_s3_mini_pro.build.cdc_on_boot=0
|
|
lolin_s3_mini_pro.build.msc_on_boot=0
|
|
lolin_s3_mini_pro.build.dfu_on_boot=0
|
|
lolin_s3_mini_pro.build.f_cpu=240000000L
|
|
lolin_s3_mini_pro.build.flash_size=4MB
|
|
lolin_s3_mini_pro.build.flash_freq=80m
|
|
lolin_s3_mini_pro.build.flash_mode=dio
|
|
lolin_s3_mini_pro.build.boot=qio
|
|
lolin_s3_mini_pro.build.boot_freq=80m
|
|
lolin_s3_mini_pro.build.partitions=default
|
|
lolin_s3_mini_pro.build.defines=-DBOARD_HAS_PSRAM
|
|
lolin_s3_mini_pro.build.loop_core=
|
|
lolin_s3_mini_pro.build.event_core=
|
|
lolin_s3_mini_pro.build.psram_type=qspi
|
|
lolin_s3_mini_pro.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
lolin_s3_mini_pro.menu.FlashMode.qio=QIO 80MHz
|
|
lolin_s3_mini_pro.menu.FlashMode.qio.build.flash_mode=dio
|
|
lolin_s3_mini_pro.menu.FlashMode.qio.build.boot=qio
|
|
lolin_s3_mini_pro.menu.FlashMode.qio.build.boot_freq=80m
|
|
lolin_s3_mini_pro.menu.FlashMode.qio.build.flash_freq=80m
|
|
lolin_s3_mini_pro.menu.FlashMode.qio120=QIO 120MHz
|
|
lolin_s3_mini_pro.menu.FlashMode.qio120.build.flash_mode=dio
|
|
lolin_s3_mini_pro.menu.FlashMode.qio120.build.boot=qio
|
|
lolin_s3_mini_pro.menu.FlashMode.qio120.build.boot_freq=120m
|
|
lolin_s3_mini_pro.menu.FlashMode.qio120.build.flash_freq=80m
|
|
|
|
lolin_s3_mini_pro.menu.LoopCore.1=Core 1
|
|
lolin_s3_mini_pro.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
lolin_s3_mini_pro.menu.LoopCore.0=Core 0
|
|
lolin_s3_mini_pro.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
lolin_s3_mini_pro.menu.EventsCore.1=Core 1
|
|
lolin_s3_mini_pro.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
lolin_s3_mini_pro.menu.EventsCore.0=Core 0
|
|
lolin_s3_mini_pro.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
lolin_s3_mini_pro.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
lolin_s3_mini_pro.menu.USBMode.hwcdc.build.usb_mode=1
|
|
lolin_s3_mini_pro.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
lolin_s3_mini_pro.menu.USBMode.default.build.usb_mode=0
|
|
|
|
lolin_s3_mini_pro.menu.CDCOnBoot.default=Disabled
|
|
lolin_s3_mini_pro.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
lolin_s3_mini_pro.menu.CDCOnBoot.cdc=Enabled
|
|
lolin_s3_mini_pro.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
lolin_s3_mini_pro.menu.MSCOnBoot.default=Disabled
|
|
lolin_s3_mini_pro.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
lolin_s3_mini_pro.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
lolin_s3_mini_pro.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
lolin_s3_mini_pro.menu.DFUOnBoot.default=Disabled
|
|
lolin_s3_mini_pro.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
lolin_s3_mini_pro.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
lolin_s3_mini_pro.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
lolin_s3_mini_pro.menu.UploadMode.default=UART0 / Hardware CDC
|
|
lolin_s3_mini_pro.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
lolin_s3_mini_pro.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
lolin_s3_mini_pro.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
lolin_s3_mini_pro.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
lolin_s3_mini_pro.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
lolin_s3_mini_pro.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
lolin_s3_mini_pro.menu.PartitionScheme.default.build.partitions=default
|
|
lolin_s3_mini_pro.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
lolin_s3_mini_pro.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
lolin_s3_mini_pro.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
lolin_s3_mini_pro.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
lolin_s3_mini_pro.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
lolin_s3_mini_pro.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
lolin_s3_mini_pro.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
lolin_s3_mini_pro.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
lolin_s3_mini_pro.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
lolin_s3_mini_pro.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
lolin_s3_mini_pro.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
lolin_s3_mini_pro.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
lolin_s3_mini_pro.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
lolin_s3_mini_pro.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
lolin_s3_mini_pro.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
lolin_s3_mini_pro.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
lolin_s3_mini_pro.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
lolin_s3_mini_pro.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
lolin_s3_mini_pro.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
lolin_s3_mini_pro.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
lolin_s3_mini_pro.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
lolin_s3_mini_pro.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
lolin_s3_mini_pro.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
lolin_s3_mini_pro.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
lolin_s3_mini_pro.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
lolin_s3_mini_pro.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
|
|
lolin_s3_mini_pro.menu.CPUFreq.240=240MHz (WiFi)
|
|
lolin_s3_mini_pro.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
lolin_s3_mini_pro.menu.CPUFreq.160=160MHz (WiFi)
|
|
lolin_s3_mini_pro.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
lolin_s3_mini_pro.menu.CPUFreq.80=80MHz (WiFi)
|
|
lolin_s3_mini_pro.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
lolin_s3_mini_pro.menu.CPUFreq.40=40MHz
|
|
lolin_s3_mini_pro.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
lolin_s3_mini_pro.menu.CPUFreq.20=20MHz
|
|
lolin_s3_mini_pro.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
lolin_s3_mini_pro.menu.CPUFreq.10=10MHz
|
|
lolin_s3_mini_pro.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
lolin_s3_mini_pro.menu.UploadSpeed.921600=921600
|
|
lolin_s3_mini_pro.menu.UploadSpeed.921600.upload.speed=921600
|
|
lolin_s3_mini_pro.menu.UploadSpeed.115200=115200
|
|
lolin_s3_mini_pro.menu.UploadSpeed.115200.upload.speed=115200
|
|
lolin_s3_mini_pro.menu.UploadSpeed.256000.windows=256000
|
|
lolin_s3_mini_pro.menu.UploadSpeed.256000.upload.speed=256000
|
|
lolin_s3_mini_pro.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
lolin_s3_mini_pro.menu.UploadSpeed.230400=230400
|
|
lolin_s3_mini_pro.menu.UploadSpeed.230400.upload.speed=230400
|
|
lolin_s3_mini_pro.menu.UploadSpeed.460800.linux=460800
|
|
lolin_s3_mini_pro.menu.UploadSpeed.460800.macosx=460800
|
|
lolin_s3_mini_pro.menu.UploadSpeed.460800.upload.speed=460800
|
|
lolin_s3_mini_pro.menu.UploadSpeed.512000.windows=512000
|
|
lolin_s3_mini_pro.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
lolin_s3_mini_pro.menu.DebugLevel.none=None
|
|
lolin_s3_mini_pro.menu.DebugLevel.none.build.code_debug=0
|
|
lolin_s3_mini_pro.menu.DebugLevel.error=Error
|
|
lolin_s3_mini_pro.menu.DebugLevel.error.build.code_debug=1
|
|
lolin_s3_mini_pro.menu.DebugLevel.warn=Warn
|
|
lolin_s3_mini_pro.menu.DebugLevel.warn.build.code_debug=2
|
|
lolin_s3_mini_pro.menu.DebugLevel.info=Info
|
|
lolin_s3_mini_pro.menu.DebugLevel.info.build.code_debug=3
|
|
lolin_s3_mini_pro.menu.DebugLevel.debug=Debug
|
|
lolin_s3_mini_pro.menu.DebugLevel.debug.build.code_debug=4
|
|
lolin_s3_mini_pro.menu.DebugLevel.verbose=Verbose
|
|
lolin_s3_mini_pro.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lolin_s3_mini_pro.menu.EraseFlash.none=Disabled
|
|
lolin_s3_mini_pro.menu.EraseFlash.none.upload.erase_cmd=
|
|
lolin_s3_mini_pro.menu.EraseFlash.all=Enabled
|
|
lolin_s3_mini_pro.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
lolin_s3_pro.name=LOLIN S3 Pro
|
|
lolin_s3_pro.vid.0=0x303a
|
|
lolin_s3_pro.pid.0=0x8161
|
|
|
|
lolin_s3_pro.bootloader.tool=esptool_py
|
|
lolin_s3_pro.bootloader.tool.default=esptool_py
|
|
|
|
lolin_s3_pro.upload.tool=esptool_py
|
|
lolin_s3_pro.upload.tool.default=esptool_py
|
|
lolin_s3_pro.upload.tool.network=esp_ota
|
|
|
|
lolin_s3_pro.upload.maximum_size=1310720
|
|
lolin_s3_pro.upload.maximum_data_size=327680
|
|
lolin_s3_pro.upload.flags=
|
|
lolin_s3_pro.upload.extra_flags=
|
|
lolin_s3_pro.upload.use_1200bps_touch=false
|
|
lolin_s3_pro.upload.wait_for_upload_port=false
|
|
|
|
lolin_s3_pro.serial.disableDTR=false
|
|
lolin_s3_pro.serial.disableRTS=false
|
|
|
|
lolin_s3_pro.build.tarch=xtensa
|
|
lolin_s3_pro.build.bootloader_addr=0x0
|
|
lolin_s3_pro.build.target=esp32s3
|
|
lolin_s3_pro.build.mcu=esp32s3
|
|
lolin_s3_pro.build.core=esp32
|
|
lolin_s3_pro.build.variant=lolin_s3_pro
|
|
lolin_s3_pro.build.board=LOLIN_S3_PRO
|
|
|
|
lolin_s3_pro.build.usb_mode=1
|
|
lolin_s3_pro.build.cdc_on_boot=0
|
|
lolin_s3_pro.build.msc_on_boot=0
|
|
lolin_s3_pro.build.dfu_on_boot=0
|
|
lolin_s3_pro.build.f_cpu=240000000L
|
|
lolin_s3_pro.build.flash_size=16MB
|
|
lolin_s3_pro.build.flash_freq=80m
|
|
lolin_s3_pro.build.flash_mode=dio
|
|
lolin_s3_pro.build.boot=qio
|
|
lolin_s3_pro.build.boot_freq=80m
|
|
lolin_s3_pro.build.partitions=default
|
|
lolin_s3_pro.build.defines=-DBOARD_HAS_PSRAM
|
|
lolin_s3_pro.build.loop_core=
|
|
lolin_s3_pro.build.event_core=
|
|
lolin_s3_pro.build.psram_type=opi
|
|
lolin_s3_pro.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
lolin_s3_pro.menu.FlashMode.qio=QIO 80MHz
|
|
lolin_s3_pro.menu.FlashMode.qio.build.flash_mode=dio
|
|
lolin_s3_pro.menu.FlashMode.qio.build.boot=qio
|
|
lolin_s3_pro.menu.FlashMode.qio.build.boot_freq=80m
|
|
lolin_s3_pro.menu.FlashMode.qio.build.flash_freq=80m
|
|
lolin_s3_pro.menu.FlashMode.qio120=QIO 120MHz
|
|
lolin_s3_pro.menu.FlashMode.qio120.build.flash_mode=dio
|
|
lolin_s3_pro.menu.FlashMode.qio120.build.boot=qio
|
|
lolin_s3_pro.menu.FlashMode.qio120.build.boot_freq=120m
|
|
lolin_s3_pro.menu.FlashMode.qio120.build.flash_freq=80m
|
|
|
|
lolin_s3_pro.menu.LoopCore.1=Core 1
|
|
lolin_s3_pro.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
lolin_s3_pro.menu.LoopCore.0=Core 0
|
|
lolin_s3_pro.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
lolin_s3_pro.menu.EventsCore.1=Core 1
|
|
lolin_s3_pro.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
lolin_s3_pro.menu.EventsCore.0=Core 0
|
|
lolin_s3_pro.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
lolin_s3_pro.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
lolin_s3_pro.menu.USBMode.hwcdc.build.usb_mode=1
|
|
lolin_s3_pro.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
lolin_s3_pro.menu.USBMode.default.build.usb_mode=0
|
|
|
|
lolin_s3_pro.menu.CDCOnBoot.default=Disabled
|
|
lolin_s3_pro.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
lolin_s3_pro.menu.CDCOnBoot.cdc=Enabled
|
|
lolin_s3_pro.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
lolin_s3_pro.menu.MSCOnBoot.default=Disabled
|
|
lolin_s3_pro.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
lolin_s3_pro.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
lolin_s3_pro.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
lolin_s3_pro.menu.DFUOnBoot.default=Disabled
|
|
lolin_s3_pro.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
lolin_s3_pro.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
lolin_s3_pro.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
lolin_s3_pro.menu.UploadMode.default=UART0 / Hardware CDC
|
|
lolin_s3_pro.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
lolin_s3_pro.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
lolin_s3_pro.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
lolin_s3_pro.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
lolin_s3_pro.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
lolin_s3_pro.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
lolin_s3_pro.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
lolin_s3_pro.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
lolin_s3_pro.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
lolin_s3_pro.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
lolin_s3_pro.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
lolin_s3_pro.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
lolin_s3_pro.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
lolin_s3_pro.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
lolin_s3_pro.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
lolin_s3_pro.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
lolin_s3_pro.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
lolin_s3_pro.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
lolin_s3_pro.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
lolin_s3_pro.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
lolin_s3_pro.menu.CPUFreq.240=240MHz (WiFi)
|
|
lolin_s3_pro.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
lolin_s3_pro.menu.CPUFreq.160=160MHz (WiFi)
|
|
lolin_s3_pro.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
lolin_s3_pro.menu.CPUFreq.80=80MHz (WiFi)
|
|
lolin_s3_pro.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
lolin_s3_pro.menu.CPUFreq.40=40MHz
|
|
lolin_s3_pro.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
lolin_s3_pro.menu.CPUFreq.20=20MHz
|
|
lolin_s3_pro.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
lolin_s3_pro.menu.CPUFreq.10=10MHz
|
|
lolin_s3_pro.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
lolin_s3_pro.menu.UploadSpeed.921600=921600
|
|
lolin_s3_pro.menu.UploadSpeed.921600.upload.speed=921600
|
|
lolin_s3_pro.menu.UploadSpeed.115200=115200
|
|
lolin_s3_pro.menu.UploadSpeed.115200.upload.speed=115200
|
|
lolin_s3_pro.menu.UploadSpeed.256000.windows=256000
|
|
lolin_s3_pro.menu.UploadSpeed.256000.upload.speed=256000
|
|
lolin_s3_pro.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
lolin_s3_pro.menu.UploadSpeed.230400=230400
|
|
lolin_s3_pro.menu.UploadSpeed.230400.upload.speed=230400
|
|
lolin_s3_pro.menu.UploadSpeed.460800.linux=460800
|
|
lolin_s3_pro.menu.UploadSpeed.460800.macosx=460800
|
|
lolin_s3_pro.menu.UploadSpeed.460800.upload.speed=460800
|
|
lolin_s3_pro.menu.UploadSpeed.512000.windows=512000
|
|
lolin_s3_pro.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
lolin_s3_pro.menu.DebugLevel.none=None
|
|
lolin_s3_pro.menu.DebugLevel.none.build.code_debug=0
|
|
lolin_s3_pro.menu.DebugLevel.error=Error
|
|
lolin_s3_pro.menu.DebugLevel.error.build.code_debug=1
|
|
lolin_s3_pro.menu.DebugLevel.warn=Warn
|
|
lolin_s3_pro.menu.DebugLevel.warn.build.code_debug=2
|
|
lolin_s3_pro.menu.DebugLevel.info=Info
|
|
lolin_s3_pro.menu.DebugLevel.info.build.code_debug=3
|
|
lolin_s3_pro.menu.DebugLevel.debug=Debug
|
|
lolin_s3_pro.menu.DebugLevel.debug.build.code_debug=4
|
|
lolin_s3_pro.menu.DebugLevel.verbose=Verbose
|
|
lolin_s3_pro.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lolin_s3_pro.menu.EraseFlash.none=Disabled
|
|
lolin_s3_pro.menu.EraseFlash.none.upload.erase_cmd=
|
|
lolin_s3_pro.menu.EraseFlash.all=Enabled
|
|
lolin_s3_pro.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
lolin32.name=WEMOS LOLIN32
|
|
|
|
lolin32.bootloader.tool=esptool_py
|
|
lolin32.bootloader.tool.default=esptool_py
|
|
|
|
lolin32.upload.tool=esptool_py
|
|
lolin32.upload.tool.default=esptool_py
|
|
lolin32.upload.tool.network=esp_ota
|
|
|
|
lolin32.upload.maximum_size=1310720
|
|
lolin32.upload.maximum_data_size=327680
|
|
lolin32.upload.flags=
|
|
lolin32.upload.extra_flags=
|
|
|
|
lolin32.serial.disableDTR=true
|
|
lolin32.serial.disableRTS=true
|
|
|
|
lolin32.build.tarch=xtensa
|
|
lolin32.build.bootloader_addr=0x1000
|
|
lolin32.build.target=esp32
|
|
lolin32.build.mcu=esp32
|
|
lolin32.build.core=esp32
|
|
lolin32.build.variant=lolin32
|
|
lolin32.build.board=LOLIN32
|
|
|
|
lolin32.build.f_cpu=240000000L
|
|
lolin32.build.flash_mode=dio
|
|
lolin32.build.flash_size=4MB
|
|
lolin32.build.boot=dio
|
|
lolin32.build.partitions=default
|
|
lolin32.build.defines=
|
|
|
|
lolin32.menu.FlashFreq.80=80MHz
|
|
lolin32.menu.FlashFreq.80.build.flash_freq=80m
|
|
lolin32.menu.FlashFreq.40=40MHz
|
|
lolin32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
lolin32.menu.PartitionScheme.default=Default
|
|
lolin32.menu.PartitionScheme.default.build.partitions=default
|
|
lolin32.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
lolin32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
lolin32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
lolin32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
lolin32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
lolin32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
lolin32.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
lolin32.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
lolin32.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
lolin32.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
lolin32.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
lolin32.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
lolin32.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
lolin32.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
lolin32.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
lolin32.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
lolin32.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
lolin32.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
lolin32.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
lolin32.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
lolin32.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
lolin32.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
lolin32.menu.UploadSpeed.921600=921600
|
|
lolin32.menu.UploadSpeed.921600.upload.speed=921600
|
|
lolin32.menu.UploadSpeed.115200=115200
|
|
lolin32.menu.UploadSpeed.115200.upload.speed=115200
|
|
lolin32.menu.UploadSpeed.256000.windows=256000
|
|
lolin32.menu.UploadSpeed.256000.upload.speed=256000
|
|
lolin32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
lolin32.menu.UploadSpeed.230400=230400
|
|
lolin32.menu.UploadSpeed.230400.upload.speed=230400
|
|
lolin32.menu.UploadSpeed.460800.linux=460800
|
|
lolin32.menu.UploadSpeed.460800.macosx=460800
|
|
lolin32.menu.UploadSpeed.460800.upload.speed=460800
|
|
lolin32.menu.UploadSpeed.512000.windows=512000
|
|
lolin32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
lolin32.menu.DebugLevel.none=None
|
|
lolin32.menu.DebugLevel.none.build.code_debug=0
|
|
lolin32.menu.DebugLevel.error=Error
|
|
lolin32.menu.DebugLevel.error.build.code_debug=1
|
|
lolin32.menu.DebugLevel.warn=Warn
|
|
lolin32.menu.DebugLevel.warn.build.code_debug=2
|
|
lolin32.menu.DebugLevel.info=Info
|
|
lolin32.menu.DebugLevel.info.build.code_debug=3
|
|
lolin32.menu.DebugLevel.debug=Debug
|
|
lolin32.menu.DebugLevel.debug.build.code_debug=4
|
|
lolin32.menu.DebugLevel.verbose=Verbose
|
|
lolin32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lolin32.menu.EraseFlash.none=Disabled
|
|
lolin32.menu.EraseFlash.none.upload.erase_cmd=
|
|
lolin32.menu.EraseFlash.all=Enabled
|
|
lolin32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
viralink32g01.name=ViraLink Gate32-0.1
|
|
|
|
viralink32g01.bootloader.tool=esptool_py
|
|
viralink32g01.bootloader.tool.default=esptool_py
|
|
|
|
viralink32g01.upload.tool=esptool_py
|
|
viralink32g01.upload.tool.default=esptool_py
|
|
viralink32g01.upload.tool.network=esp_ota
|
|
|
|
viralink32g01.upload.maximum_size=1310720
|
|
viralink32g01.upload.maximum_data_size=327680
|
|
viralink32g01.upload.flags=
|
|
viralink32g01.upload.extra_flags=
|
|
|
|
viralink32g01.serial.disableDTR=true
|
|
viralink32g01.serial.disableRTS=true
|
|
|
|
viralink32g01.build.tarch=xtensa
|
|
viralink32g01.build.bootloader_addr=0x1000
|
|
viralink32g01.build.target=esp32
|
|
viralink32g01.build.mcu=esp32
|
|
viralink32g01.build.core=esp32
|
|
viralink32g01.build.variant=ViraLink-G0.1
|
|
viralink32g01.build.board=VIRALINK_GATE32_01
|
|
|
|
viralink32g01.build.f_cpu=240000000L
|
|
viralink32g01.build.flash_mode=dio
|
|
viralink32g01.build.flash_size=4MB
|
|
viralink32g01.build.boot=dio
|
|
viralink32g01.build.partitions=default
|
|
viralink32g01.build.defines=
|
|
|
|
viralink32g01.menu.FlashFreq.80=80MHz
|
|
viralink32g01.menu.FlashFreq.80.build.flash_freq=80m
|
|
viralink32g01.menu.FlashFreq.40=40MHz
|
|
viralink32g01.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
viralink32g01.menu.PartitionScheme.default=Default
|
|
viralink32g01.menu.PartitionScheme.default.build.partitions=default
|
|
viralink32g01.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
viralink32g01.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
viralink32g01.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
viralink32g01.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
viralink32g01.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
viralink32g01.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
viralink32g01.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
viralink32g01.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
viralink32g01.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
viralink32g01.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
viralink32g01.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
viralink32g01.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
viralink32g01.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
viralink32g01.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
viralink32g01.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
viralink32g01.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
viralink32g01.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
viralink32g01.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
viralink32g01.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
viralink32g01.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
viralink32g01.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
viralink32g01.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
viralink32g01.menu.UploadSpeed.921600=921600
|
|
viralink32g01.menu.UploadSpeed.921600.upload.speed=921600
|
|
viralink32g01.menu.UploadSpeed.115200=115200
|
|
viralink32g01.menu.UploadSpeed.115200.upload.speed=115200
|
|
viralink32g01.menu.UploadSpeed.256000.windows=256000
|
|
viralink32g01.menu.UploadSpeed.256000.upload.speed=256000
|
|
viralink32g01.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
viralink32g01.menu.UploadSpeed.230400=230400
|
|
viralink32g01.menu.UploadSpeed.230400.upload.speed=230400
|
|
viralink32g01.menu.UploadSpeed.460800.linux=460800
|
|
viralink32g01.menu.UploadSpeed.460800.macosx=460800
|
|
viralink32g01.menu.UploadSpeed.460800.upload.speed=460800
|
|
viralink32g01.menu.UploadSpeed.512000.windows=512000
|
|
viralink32g01.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
viralink32g01.menu.DebugLevel.none=None
|
|
viralink32g01.menu.DebugLevel.none.build.code_debug=0
|
|
viralink32g01.menu.DebugLevel.error=Error
|
|
viralink32g01.menu.DebugLevel.error.build.code_debug=1
|
|
viralink32g01.menu.DebugLevel.warn=Warn
|
|
viralink32g01.menu.DebugLevel.warn.build.code_debug=2
|
|
viralink32g01.menu.DebugLevel.info=Info
|
|
viralink32g01.menu.DebugLevel.info.build.code_debug=3
|
|
viralink32g01.menu.DebugLevel.debug=Debug
|
|
viralink32g01.menu.DebugLevel.debug.build.code_debug=4
|
|
viralink32g01.menu.DebugLevel.verbose=Verbose
|
|
viralink32g01.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
viralink32g01.menu.EraseFlash.none=Disabled
|
|
viralink32g01.menu.EraseFlash.none.upload.erase_cmd=
|
|
viralink32g01.menu.EraseFlash.all=Enabled
|
|
viralink32g01.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
viralink32g11.name=ViraLink Gate32-1.1
|
|
|
|
viralink32g11.bootloader.tool=esptool_py
|
|
viralink32g11.bootloader.tool.default=esptool_py
|
|
|
|
viralink32g11.upload.tool=esptool_py
|
|
viralink32g11.upload.tool.default=esptool_py
|
|
viralink32g11.upload.tool.network=esp_ota
|
|
|
|
viralink32g11.upload.maximum_size=1310720
|
|
viralink32g11.upload.maximum_data_size=327680
|
|
viralink32g11.upload.flags=
|
|
viralink32g11.upload.extra_flags=
|
|
|
|
viralink32g11.serial.disableDTR=true
|
|
viralink32g11.serial.disableRTS=true
|
|
|
|
viralink32g11.build.tarch=xtensa
|
|
viralink32g11.build.bootloader_addr=0x1000
|
|
viralink32g11.build.target=esp32
|
|
viralink32g11.build.mcu=esp32
|
|
viralink32g11.build.core=esp32
|
|
viralink32g11.build.variant=ViraLink-G1.1
|
|
viralink32g11.build.board=VIRALINK_GATE32_11
|
|
|
|
viralink32g11.build.f_cpu=240000000L
|
|
viralink32g11.build.flash_mode=dio
|
|
viralink32g11.build.flash_size=4MB
|
|
viralink32g11.build.boot=dio
|
|
viralink32g11.build.partitions=default
|
|
viralink32g11.build.defines=
|
|
|
|
viralink32g11.menu.FlashFreq.80=80MHz
|
|
viralink32g11.menu.FlashFreq.80.build.flash_freq=80m
|
|
viralink32g11.menu.FlashFreq.40=40MHz
|
|
viralink32g11.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
viralink32g11.menu.PartitionScheme.default=Default
|
|
viralink32g11.menu.PartitionScheme.default.build.partitions=default
|
|
viralink32g11.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
viralink32g11.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
viralink32g11.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
viralink32g11.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
viralink32g11.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
viralink32g11.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
viralink32g11.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
viralink32g11.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
viralink32g11.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
viralink32g11.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
viralink32g11.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
viralink32g11.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
viralink32g11.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
viralink32g11.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
viralink32g11.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
viralink32g11.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
viralink32g11.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
viralink32g11.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
viralink32g11.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
viralink32g11.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
viralink32g11.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
viralink32g11.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
viralink32g11.menu.UploadSpeed.921600=921600
|
|
viralink32g11.menu.UploadSpeed.921600.upload.speed=921600
|
|
viralink32g11.menu.UploadSpeed.115200=115200
|
|
viralink32g11.menu.UploadSpeed.115200.upload.speed=115200
|
|
viralink32g11.menu.UploadSpeed.256000.windows=256000
|
|
viralink32g11.menu.UploadSpeed.256000.upload.speed=256000
|
|
viralink32g11.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
viralink32g11.menu.UploadSpeed.230400=230400
|
|
viralink32g11.menu.UploadSpeed.230400.upload.speed=230400
|
|
viralink32g11.menu.UploadSpeed.460800.linux=460800
|
|
viralink32g11.menu.UploadSpeed.460800.macosx=460800
|
|
viralink32g11.menu.UploadSpeed.460800.upload.speed=460800
|
|
viralink32g11.menu.UploadSpeed.512000.windows=512000
|
|
viralink32g11.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
viralink32g11.menu.DebugLevel.none=None
|
|
viralink32g11.menu.DebugLevel.none.build.code_debug=0
|
|
viralink32g11.menu.DebugLevel.error=Error
|
|
viralink32g11.menu.DebugLevel.error.build.code_debug=1
|
|
viralink32g11.menu.DebugLevel.warn=Warn
|
|
viralink32g11.menu.DebugLevel.warn.build.code_debug=2
|
|
viralink32g11.menu.DebugLevel.info=Info
|
|
viralink32g11.menu.DebugLevel.info.build.code_debug=3
|
|
viralink32g11.menu.DebugLevel.debug=Debug
|
|
viralink32g11.menu.DebugLevel.debug.build.code_debug=4
|
|
viralink32g11.menu.DebugLevel.verbose=Verbose
|
|
viralink32g11.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
viralink32g11.menu.EraseFlash.none=Disabled
|
|
viralink32g11.menu.EraseFlash.none.upload.erase_cmd=
|
|
viralink32g11.menu.EraseFlash.all=Enabled
|
|
viralink32g11.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
lolin32-lite.name=WEMOS LOLIN32 Lite
|
|
|
|
lolin32-lite.bootloader.tool=esptool_py
|
|
lolin32-lite.bootloader.tool.default=esptool_py
|
|
|
|
lolin32-lite.upload.tool=esptool_py
|
|
lolin32-lite.upload.tool.default=esptool_py
|
|
lolin32-lite.upload.tool.network=esp_ota
|
|
|
|
lolin32-lite.upload.maximum_size=1310720
|
|
lolin32-lite.upload.maximum_data_size=327680
|
|
lolin32-lite.upload.wait_for_upload_port=true
|
|
lolin32-lite.upload.flags=
|
|
lolin32-lite.upload.extra_flags=
|
|
|
|
lolin32-lite.serial.disableDTR=true
|
|
lolin32-lite.serial.disableRTS=true
|
|
|
|
lolin32-lite.build.tarch=xtensa
|
|
lolin32-lite.build.bootloader_addr=0x1000
|
|
lolin32-lite.build.target=esp32
|
|
lolin32-lite.build.mcu=esp32
|
|
lolin32-lite.build.core=esp32
|
|
lolin32-lite.build.variant=lolin32-lite
|
|
lolin32-lite.build.board=LOLIN32_LITE
|
|
|
|
lolin32-lite.build.f_cpu=240000000L
|
|
lolin32-lite.build.flash_mode=dio
|
|
lolin32-lite.build.flash_size=4MB
|
|
lolin32-lite.build.boot=dio
|
|
lolin32-lite.build.partitions=default
|
|
lolin32-lite.build.defines=
|
|
|
|
lolin32-lite.menu.FlashFreq.80=80MHz
|
|
lolin32-lite.menu.FlashFreq.80.build.flash_freq=80m
|
|
lolin32-lite.menu.FlashFreq.40=40MHz
|
|
lolin32-lite.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
lolin32-lite.menu.PartitionScheme.default=Default
|
|
lolin32-lite.menu.PartitionScheme.default.build.partitions=default
|
|
lolin32-lite.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
lolin32-lite.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
lolin32-lite.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
lolin32-lite.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
lolin32-lite.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
lolin32-lite.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
lolin32-lite.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
lolin32-lite.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
lolin32-lite.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
lolin32-lite.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
lolin32-lite.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
lolin32-lite.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
lolin32-lite.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
lolin32-lite.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
lolin32-lite.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
lolin32-lite.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
lolin32-lite.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
lolin32-lite.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
lolin32-lite.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
lolin32-lite.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
lolin32-lite.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
lolin32-lite.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
lolin32-lite.menu.UploadSpeed.921600=921600
|
|
lolin32-lite.menu.UploadSpeed.921600.upload.speed=921600
|
|
lolin32-lite.menu.UploadSpeed.115200=115200
|
|
lolin32-lite.menu.UploadSpeed.115200.upload.speed=115200
|
|
lolin32-lite.menu.UploadSpeed.256000.windows=256000
|
|
lolin32-lite.menu.UploadSpeed.256000.upload.speed=256000
|
|
lolin32-lite.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
lolin32-lite.menu.UploadSpeed.230400=230400
|
|
lolin32-lite.menu.UploadSpeed.230400.upload.speed=230400
|
|
lolin32-lite.menu.UploadSpeed.460800.linux=460800
|
|
lolin32-lite.menu.UploadSpeed.460800.macosx=460800
|
|
lolin32-lite.menu.UploadSpeed.460800.upload.speed=460800
|
|
lolin32-lite.menu.UploadSpeed.512000.windows=512000
|
|
lolin32-lite.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
lolin32-lite.menu.DebugLevel.none=None
|
|
lolin32-lite.menu.DebugLevel.none.build.code_debug=0
|
|
lolin32-lite.menu.DebugLevel.error=Error
|
|
lolin32-lite.menu.DebugLevel.error.build.code_debug=1
|
|
lolin32-lite.menu.DebugLevel.warn=Warn
|
|
lolin32-lite.menu.DebugLevel.warn.build.code_debug=2
|
|
lolin32-lite.menu.DebugLevel.info=Info
|
|
lolin32-lite.menu.DebugLevel.info.build.code_debug=3
|
|
lolin32-lite.menu.DebugLevel.debug=Debug
|
|
lolin32-lite.menu.DebugLevel.debug.build.code_debug=4
|
|
lolin32-lite.menu.DebugLevel.verbose=Verbose
|
|
lolin32-lite.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lolin32-lite.menu.EraseFlash.none=Disabled
|
|
lolin32-lite.menu.EraseFlash.none.upload.erase_cmd=
|
|
lolin32-lite.menu.EraseFlash.all=Enabled
|
|
lolin32-lite.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
pocket_32.name=Dongsen Tech Pocket 32
|
|
|
|
pocket_32.bootloader.tool=esptool_py
|
|
pocket_32.bootloader.tool.default=esptool_py
|
|
|
|
pocket_32.upload.tool=esptool_py
|
|
pocket_32.upload.tool.default=esptool_py
|
|
pocket_32.upload.tool.network=esp_ota
|
|
|
|
pocket_32.upload.maximum_size=1310720
|
|
pocket_32.upload.maximum_data_size=327680
|
|
pocket_32.upload.flags=
|
|
pocket_32.upload.extra_flags=
|
|
|
|
pocket_32.serial.disableDTR=true
|
|
pocket_32.serial.disableRTS=true
|
|
|
|
pocket_32.build.tarch=xtensa
|
|
pocket_32.build.bootloader_addr=0x1000
|
|
pocket_32.build.target=esp32
|
|
pocket_32.build.mcu=esp32
|
|
pocket_32.build.core=esp32
|
|
pocket_32.build.variant=pocket_32
|
|
pocket_32.build.board=Pocket32
|
|
|
|
pocket_32.build.f_cpu=240000000L
|
|
pocket_32.build.flash_mode=dio
|
|
pocket_32.build.flash_size=4MB
|
|
pocket_32.build.boot=dio
|
|
pocket_32.build.partitions=default
|
|
pocket_32.build.defines=
|
|
|
|
pocket_32.menu.FlashFreq.80=80MHz
|
|
pocket_32.menu.FlashFreq.80.build.flash_freq=80m
|
|
pocket_32.menu.FlashFreq.40=40MHz
|
|
pocket_32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
pocket_32.menu.UploadSpeed.921600=921600
|
|
pocket_32.menu.UploadSpeed.921600.upload.speed=921600
|
|
pocket_32.menu.UploadSpeed.115200=115200
|
|
pocket_32.menu.UploadSpeed.115200.upload.speed=115200
|
|
pocket_32.menu.UploadSpeed.256000.windows=256000
|
|
pocket_32.menu.UploadSpeed.256000.upload.speed=256000
|
|
pocket_32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
pocket_32.menu.UploadSpeed.230400=230400
|
|
pocket_32.menu.UploadSpeed.230400.upload.speed=230400
|
|
pocket_32.menu.UploadSpeed.460800.linux=460800
|
|
pocket_32.menu.UploadSpeed.460800.macosx=460800
|
|
pocket_32.menu.UploadSpeed.460800.upload.speed=460800
|
|
pocket_32.menu.UploadSpeed.512000.windows=512000
|
|
pocket_32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
pocket_32.menu.DebugLevel.none=None
|
|
pocket_32.menu.DebugLevel.none.build.code_debug=0
|
|
pocket_32.menu.DebugLevel.error=Error
|
|
pocket_32.menu.DebugLevel.error.build.code_debug=1
|
|
pocket_32.menu.DebugLevel.warn=Warn
|
|
pocket_32.menu.DebugLevel.warn.build.code_debug=2
|
|
pocket_32.menu.DebugLevel.info=Info
|
|
pocket_32.menu.DebugLevel.info.build.code_debug=3
|
|
pocket_32.menu.DebugLevel.debug=Debug
|
|
pocket_32.menu.DebugLevel.debug.build.code_debug=4
|
|
pocket_32.menu.DebugLevel.verbose=Verbose
|
|
pocket_32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
pocket_32.menu.EraseFlash.none=Disabled
|
|
pocket_32.menu.EraseFlash.none.upload.erase_cmd=
|
|
pocket_32.menu.EraseFlash.all=Enabled
|
|
pocket_32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
WeMosBat.name=WeMos WiFi&Bluetooth Battery
|
|
|
|
WeMosBat.bootloader.tool=esptool_py
|
|
WeMosBat.bootloader.tool.default=esptool_py
|
|
|
|
WeMosBat.upload.tool=esptool_py
|
|
WeMosBat.upload.tool.default=esptool_py
|
|
WeMosBat.upload.tool.network=esp_ota
|
|
|
|
WeMosBat.upload.maximum_size=1310720
|
|
WeMosBat.upload.maximum_data_size=327680
|
|
WeMosBat.upload.flags=
|
|
WeMosBat.upload.extra_flags=
|
|
|
|
WeMosBat.serial.disableDTR=true
|
|
WeMosBat.serial.disableRTS=true
|
|
|
|
WeMosBat.build.tarch=xtensa
|
|
WeMosBat.build.bootloader_addr=0x1000
|
|
WeMosBat.build.target=esp32
|
|
WeMosBat.build.mcu=esp32
|
|
WeMosBat.build.core=esp32
|
|
WeMosBat.build.variant=pocket_32
|
|
WeMosBat.build.board=Pocket32
|
|
|
|
WeMosBat.build.f_cpu=240000000L
|
|
WeMosBat.build.flash_mode=dio
|
|
WeMosBat.build.flash_size=4MB
|
|
WeMosBat.build.boot=dio
|
|
WeMosBat.build.partitions=default
|
|
WeMosBat.build.defines=
|
|
|
|
WeMosBat.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
WeMosBat.menu.PartitionScheme.default.build.partitions=default
|
|
WeMosBat.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
WeMosBat.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
WeMosBat.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
WeMosBat.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
WeMosBat.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
WeMosBat.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
WeMosBat.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
WeMosBat.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
WeMosBat.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
WeMosBat.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
WeMosBat.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
WeMosBat.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
WeMosBat.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
WeMosBat.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
WeMosBat.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
WeMosBat.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
WeMosBat.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
WeMosBat.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
WeMosBat.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
WeMosBat.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
WeMosBat.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
WeMosBat.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
WeMosBat.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
WeMosBat.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
WeMosBat.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
WeMosBat.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
WeMosBat.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
WeMosBat.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
WeMosBat.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
WeMosBat.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
WeMosBat.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
WeMosBat.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
WeMosBat.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
WeMosBat.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
WeMosBat.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
WeMosBat.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
WeMosBat.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
|
|
WeMosBat.menu.FlashFreq.80=80MHz
|
|
WeMosBat.menu.FlashFreq.80.build.flash_freq=80m
|
|
WeMosBat.menu.FlashFreq.40=40MHz
|
|
WeMosBat.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
WeMosBat.menu.UploadSpeed.921600=921600
|
|
WeMosBat.menu.UploadSpeed.921600.upload.speed=921600
|
|
WeMosBat.menu.UploadSpeed.115200=115200
|
|
WeMosBat.menu.UploadSpeed.115200.upload.speed=115200
|
|
WeMosBat.menu.UploadSpeed.256000.windows=256000
|
|
WeMosBat.menu.UploadSpeed.256000.upload.speed=256000
|
|
WeMosBat.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
WeMosBat.menu.UploadSpeed.230400=230400
|
|
WeMosBat.menu.UploadSpeed.230400.upload.speed=230400
|
|
WeMosBat.menu.UploadSpeed.460800.linux=460800
|
|
WeMosBat.menu.UploadSpeed.460800.macosx=460800
|
|
WeMosBat.menu.UploadSpeed.460800.upload.speed=460800
|
|
WeMosBat.menu.UploadSpeed.512000.windows=512000
|
|
WeMosBat.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
WeMosBat.menu.DebugLevel.none=None
|
|
WeMosBat.menu.DebugLevel.none.build.code_debug=0
|
|
WeMosBat.menu.DebugLevel.error=Error
|
|
WeMosBat.menu.DebugLevel.error.build.code_debug=1
|
|
WeMosBat.menu.DebugLevel.warn=Warn
|
|
WeMosBat.menu.DebugLevel.warn.build.code_debug=2
|
|
WeMosBat.menu.DebugLevel.info=Info
|
|
WeMosBat.menu.DebugLevel.info.build.code_debug=3
|
|
WeMosBat.menu.DebugLevel.debug=Debug
|
|
WeMosBat.menu.DebugLevel.debug.build.code_debug=4
|
|
WeMosBat.menu.DebugLevel.verbose=Verbose
|
|
WeMosBat.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
WeMosBat.menu.EraseFlash.none=Disabled
|
|
WeMosBat.menu.EraseFlash.none.upload.erase_cmd=
|
|
WeMosBat.menu.EraseFlash.all=Enabled
|
|
WeMosBat.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
espea32.name=ESPea32
|
|
|
|
espea32.bootloader.tool=esptool_py
|
|
espea32.bootloader.tool.default=esptool_py
|
|
|
|
espea32.upload.tool=esptool_py
|
|
espea32.upload.tool.default=esptool_py
|
|
espea32.upload.tool.network=esp_ota
|
|
|
|
espea32.upload.maximum_size=1310720
|
|
espea32.upload.maximum_data_size=327680
|
|
espea32.upload.flags=
|
|
espea32.upload.extra_flags=
|
|
|
|
espea32.serial.disableDTR=true
|
|
espea32.serial.disableRTS=true
|
|
|
|
espea32.build.tarch=xtensa
|
|
espea32.build.bootloader_addr=0x1000
|
|
espea32.build.target=esp32
|
|
espea32.build.mcu=esp32
|
|
espea32.build.core=esp32
|
|
espea32.build.variant=espea32
|
|
espea32.build.board=ESPea32
|
|
|
|
espea32.build.f_cpu=240000000L
|
|
espea32.build.flash_mode=dio
|
|
espea32.build.flash_size=4MB
|
|
espea32.build.boot=dio
|
|
espea32.build.partitions=default
|
|
espea32.build.defines=
|
|
|
|
espea32.menu.FlashFreq.80=80MHz
|
|
espea32.menu.FlashFreq.80.build.flash_freq=80m
|
|
espea32.menu.FlashFreq.40=40MHz
|
|
espea32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
espea32.menu.UploadSpeed.921600=921600
|
|
espea32.menu.UploadSpeed.921600.upload.speed=921600
|
|
espea32.menu.UploadSpeed.115200=115200
|
|
espea32.menu.UploadSpeed.115200.upload.speed=115200
|
|
espea32.menu.UploadSpeed.256000.windows=256000
|
|
espea32.menu.UploadSpeed.256000.upload.speed=256000
|
|
espea32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
espea32.menu.UploadSpeed.230400=230400
|
|
espea32.menu.UploadSpeed.230400.upload.speed=230400
|
|
espea32.menu.UploadSpeed.460800.linux=460800
|
|
espea32.menu.UploadSpeed.460800.macosx=460800
|
|
espea32.menu.UploadSpeed.460800.upload.speed=460800
|
|
espea32.menu.UploadSpeed.512000.windows=512000
|
|
espea32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
espea32.menu.DebugLevel.none=None
|
|
espea32.menu.DebugLevel.none.build.code_debug=0
|
|
espea32.menu.DebugLevel.error=Error
|
|
espea32.menu.DebugLevel.error.build.code_debug=1
|
|
espea32.menu.DebugLevel.warn=Warn
|
|
espea32.menu.DebugLevel.warn.build.code_debug=2
|
|
espea32.menu.DebugLevel.info=Info
|
|
espea32.menu.DebugLevel.info.build.code_debug=3
|
|
espea32.menu.DebugLevel.debug=Debug
|
|
espea32.menu.DebugLevel.debug.build.code_debug=4
|
|
espea32.menu.DebugLevel.verbose=Verbose
|
|
espea32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
espea32.menu.EraseFlash.none=Disabled
|
|
espea32.menu.EraseFlash.none.upload.erase_cmd=
|
|
espea32.menu.EraseFlash.all=Enabled
|
|
espea32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
quantum.name=Noduino Quantum
|
|
|
|
quantum.bootloader.tool=esptool_py
|
|
quantum.bootloader.tool.default=esptool_py
|
|
|
|
quantum.upload.tool=esptool_py
|
|
quantum.upload.tool.default=esptool_py
|
|
quantum.upload.tool.network=esp_ota
|
|
|
|
quantum.upload.maximum_size=1310720
|
|
quantum.upload.maximum_data_size=327680
|
|
quantum.upload.flags=
|
|
quantum.upload.extra_flags=
|
|
|
|
quantum.serial.disableDTR=true
|
|
quantum.serial.disableRTS=true
|
|
|
|
quantum.build.tarch=xtensa
|
|
quantum.build.bootloader_addr=0x1000
|
|
quantum.build.target=esp32
|
|
quantum.build.mcu=esp32
|
|
quantum.build.core=esp32
|
|
quantum.build.variant=quantum
|
|
quantum.build.board=QUANTUM
|
|
|
|
quantum.build.f_cpu=240000000L
|
|
quantum.build.flash_mode=qio
|
|
quantum.build.flash_size=16MB
|
|
quantum.build.boot=dio
|
|
quantum.build.partitions=default
|
|
quantum.build.defines=
|
|
|
|
quantum.menu.FlashFreq.80=80MHz
|
|
quantum.menu.FlashFreq.80.build.flash_freq=80m
|
|
quantum.menu.FlashFreq.40=40MHz
|
|
quantum.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
quantum.menu.UploadSpeed.921600=921600
|
|
quantum.menu.UploadSpeed.921600.upload.speed=921600
|
|
quantum.menu.UploadSpeed.115200=115200
|
|
quantum.menu.UploadSpeed.115200.upload.speed=115200
|
|
quantum.menu.UploadSpeed.256000.windows=256000
|
|
quantum.menu.UploadSpeed.256000.upload.speed=256000
|
|
quantum.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
quantum.menu.UploadSpeed.230400=230400
|
|
quantum.menu.UploadSpeed.230400.upload.speed=230400
|
|
quantum.menu.UploadSpeed.460800.linux=460800
|
|
quantum.menu.UploadSpeed.460800.macosx=460800
|
|
quantum.menu.UploadSpeed.460800.upload.speed=460800
|
|
quantum.menu.UploadSpeed.512000.windows=512000
|
|
quantum.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
quantum.menu.DebugLevel.none=None
|
|
quantum.menu.DebugLevel.none.build.code_debug=0
|
|
quantum.menu.DebugLevel.error=Error
|
|
quantum.menu.DebugLevel.error.build.code_debug=1
|
|
quantum.menu.DebugLevel.warn=Warn
|
|
quantum.menu.DebugLevel.warn.build.code_debug=2
|
|
quantum.menu.DebugLevel.info=Info
|
|
quantum.menu.DebugLevel.info.build.code_debug=3
|
|
quantum.menu.DebugLevel.debug=Debug
|
|
quantum.menu.DebugLevel.debug.build.code_debug=4
|
|
quantum.menu.DebugLevel.verbose=Verbose
|
|
quantum.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
quantum.menu.EraseFlash.none=Disabled
|
|
quantum.menu.EraseFlash.none.upload.erase_cmd=
|
|
quantum.menu.EraseFlash.all=Enabled
|
|
quantum.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
node32s.name=Node32s
|
|
|
|
node32s.bootloader.tool=esptool_py
|
|
node32s.bootloader.tool.default=esptool_py
|
|
|
|
node32s.upload.tool=esptool_py
|
|
node32s.upload.tool.default=esptool_py
|
|
node32s.upload.tool.network=esp_ota
|
|
|
|
node32s.upload.maximum_size=1310720
|
|
node32s.upload.maximum_data_size=327680
|
|
node32s.upload.flags=
|
|
node32s.upload.extra_flags=
|
|
|
|
node32s.serial.disableDTR=true
|
|
node32s.serial.disableRTS=true
|
|
|
|
node32s.build.tarch=xtensa
|
|
node32s.build.bootloader_addr=0x1000
|
|
node32s.build.target=esp32
|
|
node32s.build.mcu=esp32
|
|
node32s.build.core=esp32
|
|
node32s.build.variant=node32s
|
|
node32s.build.board=Node32s
|
|
|
|
node32s.build.f_cpu=240000000L
|
|
node32s.build.flash_mode=dio
|
|
node32s.build.flash_size=4MB
|
|
node32s.build.boot=dio
|
|
node32s.build.partitions=default
|
|
node32s.build.defines=
|
|
|
|
node32s.menu.PartitionScheme.default=Default
|
|
node32s.menu.PartitionScheme.default.build.partitions=default
|
|
node32s.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
node32s.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
node32s.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
node32s.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
node32s.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
node32s.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
node32s.menu.FlashFreq.80=80MHz
|
|
node32s.menu.FlashFreq.80.build.flash_freq=80m
|
|
node32s.menu.FlashFreq.40=40MHz
|
|
node32s.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
node32s.menu.UploadSpeed.921600=921600
|
|
node32s.menu.UploadSpeed.921600.upload.speed=921600
|
|
node32s.menu.UploadSpeed.115200=115200
|
|
node32s.menu.UploadSpeed.115200.upload.speed=115200
|
|
node32s.menu.UploadSpeed.256000.windows=256000
|
|
node32s.menu.UploadSpeed.256000.upload.speed=256000
|
|
node32s.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
node32s.menu.UploadSpeed.230400=230400
|
|
node32s.menu.UploadSpeed.230400.upload.speed=230400
|
|
node32s.menu.UploadSpeed.460800.linux=460800
|
|
node32s.menu.UploadSpeed.460800.macosx=460800
|
|
node32s.menu.UploadSpeed.460800.upload.speed=460800
|
|
node32s.menu.UploadSpeed.512000.windows=512000
|
|
node32s.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
node32s.menu.DebugLevel.none=None
|
|
node32s.menu.DebugLevel.none.build.code_debug=0
|
|
node32s.menu.DebugLevel.error=Error
|
|
node32s.menu.DebugLevel.error.build.code_debug=1
|
|
node32s.menu.DebugLevel.warn=Warn
|
|
node32s.menu.DebugLevel.warn.build.code_debug=2
|
|
node32s.menu.DebugLevel.info=Info
|
|
node32s.menu.DebugLevel.info.build.code_debug=3
|
|
node32s.menu.DebugLevel.debug=Debug
|
|
node32s.menu.DebugLevel.debug.build.code_debug=4
|
|
node32s.menu.DebugLevel.verbose=Verbose
|
|
node32s.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
node32s.menu.EraseFlash.none=Disabled
|
|
node32s.menu.EraseFlash.none.upload.erase_cmd=
|
|
node32s.menu.EraseFlash.all=Enabled
|
|
node32s.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
hornbill32dev.name=Hornbill ESP32 Dev
|
|
|
|
hornbill32dev.bootloader.tool=esptool_py
|
|
hornbill32dev.bootloader.tool.default=esptool_py
|
|
|
|
hornbill32dev.upload.tool=esptool_py
|
|
hornbill32dev.upload.tool.default=esptool_py
|
|
hornbill32dev.upload.tool.network=esp_ota
|
|
|
|
hornbill32dev.upload.maximum_size=1310720
|
|
hornbill32dev.upload.maximum_data_size=327680
|
|
hornbill32dev.upload.flags=
|
|
hornbill32dev.upload.extra_flags=
|
|
|
|
hornbill32dev.serial.disableDTR=true
|
|
hornbill32dev.serial.disableRTS=true
|
|
|
|
hornbill32dev.build.tarch=xtensa
|
|
hornbill32dev.build.bootloader_addr=0x1000
|
|
hornbill32dev.build.target=esp32
|
|
hornbill32dev.build.mcu=esp32
|
|
hornbill32dev.build.core=esp32
|
|
hornbill32dev.build.variant=hornbill32dev
|
|
hornbill32dev.build.board=HORNBILL_ESP32_DEV
|
|
|
|
hornbill32dev.build.f_cpu=240000000L
|
|
hornbill32dev.build.flash_mode=dio
|
|
hornbill32dev.build.flash_size=4MB
|
|
hornbill32dev.build.boot=dio
|
|
hornbill32dev.build.partitions=default
|
|
hornbill32dev.build.defines=
|
|
|
|
hornbill32dev.menu.FlashFreq.80=80MHz
|
|
hornbill32dev.menu.FlashFreq.80.build.flash_freq=80m
|
|
hornbill32dev.menu.FlashFreq.40=40MHz
|
|
hornbill32dev.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
hornbill32dev.menu.UploadSpeed.921600=921600
|
|
hornbill32dev.menu.UploadSpeed.921600.upload.speed=921600
|
|
hornbill32dev.menu.UploadSpeed.115200=115200
|
|
hornbill32dev.menu.UploadSpeed.115200.upload.speed=115200
|
|
hornbill32dev.menu.UploadSpeed.256000.windows=256000
|
|
hornbill32dev.menu.UploadSpeed.256000.upload.speed=256000
|
|
hornbill32dev.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
hornbill32dev.menu.UploadSpeed.230400=230400
|
|
hornbill32dev.menu.UploadSpeed.230400.upload.speed=230400
|
|
hornbill32dev.menu.UploadSpeed.460800.linux=460800
|
|
hornbill32dev.menu.UploadSpeed.460800.macosx=460800
|
|
hornbill32dev.menu.UploadSpeed.460800.upload.speed=460800
|
|
hornbill32dev.menu.UploadSpeed.512000.windows=512000
|
|
hornbill32dev.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
hornbill32dev.menu.DebugLevel.none=None
|
|
hornbill32dev.menu.DebugLevel.none.build.code_debug=0
|
|
hornbill32dev.menu.DebugLevel.error=Error
|
|
hornbill32dev.menu.DebugLevel.error.build.code_debug=1
|
|
hornbill32dev.menu.DebugLevel.warn=Warn
|
|
hornbill32dev.menu.DebugLevel.warn.build.code_debug=2
|
|
hornbill32dev.menu.DebugLevel.info=Info
|
|
hornbill32dev.menu.DebugLevel.info.build.code_debug=3
|
|
hornbill32dev.menu.DebugLevel.debug=Debug
|
|
hornbill32dev.menu.DebugLevel.debug.build.code_debug=4
|
|
hornbill32dev.menu.DebugLevel.verbose=Verbose
|
|
hornbill32dev.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
hornbill32dev.menu.EraseFlash.none=Disabled
|
|
hornbill32dev.menu.EraseFlash.none.upload.erase_cmd=
|
|
hornbill32dev.menu.EraseFlash.all=Enabled
|
|
hornbill32dev.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
hornbill32minima.name=Hornbill ESP32 Minima
|
|
|
|
hornbill32minima.bootloader.tool=esptool_py
|
|
hornbill32minima.bootloader.tool.default=esptool_py
|
|
|
|
hornbill32minima.upload.tool=esptool_py
|
|
hornbill32minima.upload.tool.default=esptool_py
|
|
hornbill32minima.upload.tool.network=esp_ota
|
|
|
|
hornbill32minima.upload.maximum_size=1310720
|
|
hornbill32minima.upload.maximum_data_size=327680
|
|
hornbill32minima.upload.flags=
|
|
hornbill32minima.upload.extra_flags=
|
|
|
|
hornbill32minima.serial.disableDTR=true
|
|
hornbill32minima.serial.disableRTS=true
|
|
|
|
hornbill32minima.build.tarch=xtensa
|
|
hornbill32minima.build.bootloader_addr=0x1000
|
|
hornbill32minima.build.target=esp32
|
|
hornbill32minima.build.mcu=esp32
|
|
hornbill32minima.build.core=esp32
|
|
hornbill32minima.build.variant=hornbill32minima
|
|
hornbill32minima.build.board=HORNBILL_ESP32_MINIMA
|
|
hornbill32minima.build.f_cpu=240000000L
|
|
hornbill32minima.build.flash_mode=dio
|
|
hornbill32minima.build.flash_size=4MB
|
|
hornbill32minima.build.boot=dio
|
|
hornbill32minima.build.partitions=default
|
|
hornbill32minima.build.defines=
|
|
|
|
hornbill32minima.menu.FlashFreq.80=80MHz
|
|
hornbill32minima.menu.FlashFreq.80.build.flash_freq=80m
|
|
hornbill32minima.menu.FlashFreq.40=40MHz
|
|
hornbill32minima.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
hornbill32minima.menu.UploadSpeed.921600=921600
|
|
hornbill32minima.menu.UploadSpeed.921600.upload.speed=921600
|
|
hornbill32minima.menu.UploadSpeed.115200=115200
|
|
hornbill32minima.menu.UploadSpeed.115200.upload.speed=115200
|
|
hornbill32minima.menu.UploadSpeed.256000.windows=256000
|
|
hornbill32minima.menu.UploadSpeed.256000.upload.speed=256000
|
|
hornbill32minima.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
hornbill32minima.menu.UploadSpeed.230400=230400
|
|
hornbill32minima.menu.UploadSpeed.230400.upload.speed=230400
|
|
hornbill32minima.menu.UploadSpeed.460800.linux=460800
|
|
hornbill32minima.menu.UploadSpeed.460800.macosx=460800
|
|
hornbill32minima.menu.UploadSpeed.460800.upload.speed=460800
|
|
hornbill32minima.menu.UploadSpeed.512000.windows=512000
|
|
hornbill32minima.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
hornbill32minima.menu.DebugLevel.none=None
|
|
hornbill32minima.menu.DebugLevel.none.build.code_debug=0
|
|
hornbill32minima.menu.DebugLevel.error=Error
|
|
hornbill32minima.menu.DebugLevel.error.build.code_debug=1
|
|
hornbill32minima.menu.DebugLevel.warn=Warn
|
|
hornbill32minima.menu.DebugLevel.warn.build.code_debug=2
|
|
hornbill32minima.menu.DebugLevel.info=Info
|
|
hornbill32minima.menu.DebugLevel.info.build.code_debug=3
|
|
hornbill32minima.menu.DebugLevel.debug=Debug
|
|
hornbill32minima.menu.DebugLevel.debug.build.code_debug=4
|
|
hornbill32minima.menu.DebugLevel.verbose=Verbose
|
|
hornbill32minima.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
hornbill32minima.menu.EraseFlash.none=Disabled
|
|
hornbill32minima.menu.EraseFlash.none.upload.erase_cmd=
|
|
hornbill32minima.menu.EraseFlash.all=Enabled
|
|
hornbill32minima.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
dfrobot_beetle_esp32c3.name=DFRobot Beetle ESP32-C3
|
|
|
|
dfrobot_beetle_esp32c3.bootloader.tool=esptool_py
|
|
dfrobot_beetle_esp32c3.bootloader.tool.default=esptool_py
|
|
|
|
dfrobot_beetle_esp32c3.upload.tool=esptool_py
|
|
dfrobot_beetle_esp32c3.upload.tool.default=esptool_py
|
|
dfrobot_beetle_esp32c3.upload.tool.network=esp_ota
|
|
|
|
dfrobot_beetle_esp32c3.upload.maximum_size=1310720
|
|
dfrobot_beetle_esp32c3.upload.maximum_data_size=327680
|
|
dfrobot_beetle_esp32c3.upload.flags=
|
|
dfrobot_beetle_esp32c3.upload.extra_flags=
|
|
dfrobot_beetle_esp32c3.upload.use_1200bps_touch=false
|
|
dfrobot_beetle_esp32c3.upload.wait_for_upload_port=false
|
|
|
|
dfrobot_beetle_esp32c3.serial.disableDTR=false
|
|
dfrobot_beetle_esp32c3.serial.disableRTS=false
|
|
|
|
dfrobot_beetle_esp32c3.build.tarch=riscv32
|
|
dfrobot_beetle_esp32c3.build.target=esp
|
|
dfrobot_beetle_esp32c3.build.mcu=esp32c3
|
|
dfrobot_beetle_esp32c3.build.core=esp32
|
|
dfrobot_beetle_esp32c3.build.variant=dfrobot_beetle_esp32c3
|
|
#dfrobot_beetle_esp32c3.build.board=DFROBOT_BEETLE_ESP32_C3
|
|
dfrobot_beetle_esp32c3.build.board=ESP32C3_DEV
|
|
dfrobot_beetle_esp32c3.build.bootloader_addr=0x0
|
|
|
|
dfrobot_beetle_esp32c3.build.cdc_on_boot=0
|
|
dfrobot_beetle_esp32c3.build.f_cpu=160000000L
|
|
dfrobot_beetle_esp32c3.build.flash_size=4MB
|
|
dfrobot_beetle_esp32c3.build.flash_freq=80m
|
|
dfrobot_beetle_esp32c3.build.flash_mode=qio
|
|
dfrobot_beetle_esp32c3.build.boot=qio
|
|
dfrobot_beetle_esp32c3.build.partitions=default
|
|
dfrobot_beetle_esp32c3.build.defines=
|
|
|
|
dfrobot_beetle_esp32c3.menu.CDCOnBoot.default=Disabled
|
|
dfrobot_beetle_esp32c3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
dfrobot_beetle_esp32c3.menu.CDCOnBoot.cdc=Enabled
|
|
dfrobot_beetle_esp32c3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.default.build.partitions=default
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
dfrobot_beetle_esp32c3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
|
|
dfrobot_beetle_esp32c3.menu.CPUFreq.160=160MHz (WiFi)
|
|
dfrobot_beetle_esp32c3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
dfrobot_beetle_esp32c3.menu.CPUFreq.80=80MHz (WiFi)
|
|
dfrobot_beetle_esp32c3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
dfrobot_beetle_esp32c3.menu.CPUFreq.40=40MHz
|
|
dfrobot_beetle_esp32c3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
dfrobot_beetle_esp32c3.menu.CPUFreq.20=20MHz
|
|
dfrobot_beetle_esp32c3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
dfrobot_beetle_esp32c3.menu.CPUFreq.10=10MHz
|
|
dfrobot_beetle_esp32c3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
dfrobot_beetle_esp32c3.menu.FlashMode.qio=QIO
|
|
dfrobot_beetle_esp32c3.menu.FlashMode.qio.build.flash_mode=dio
|
|
dfrobot_beetle_esp32c3.menu.FlashMode.qio.build.boot=qio
|
|
dfrobot_beetle_esp32c3.menu.FlashMode.dio=DIO
|
|
dfrobot_beetle_esp32c3.menu.FlashMode.dio.build.flash_mode=dio
|
|
dfrobot_beetle_esp32c3.menu.FlashMode.dio.build.boot=dio
|
|
|
|
dfrobot_beetle_esp32c3.menu.FlashFreq.80=80MHz
|
|
dfrobot_beetle_esp32c3.menu.FlashFreq.80.build.flash_freq=80m
|
|
dfrobot_beetle_esp32c3.menu.FlashFreq.40=40MHz
|
|
dfrobot_beetle_esp32c3.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
dfrobot_beetle_esp32c3.menu.FlashSize.4M=4MB (32Mb)
|
|
dfrobot_beetle_esp32c3.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
dfrobot_beetle_esp32c3.menu.UploadSpeed.921600=921600
|
|
dfrobot_beetle_esp32c3.menu.UploadSpeed.921600.upload.speed=921600
|
|
dfrobot_beetle_esp32c3.menu.UploadSpeed.115200=115200
|
|
dfrobot_beetle_esp32c3.menu.UploadSpeed.115200.upload.speed=115200
|
|
dfrobot_beetle_esp32c3.menu.UploadSpeed.256000.windows=256000
|
|
dfrobot_beetle_esp32c3.menu.UploadSpeed.256000.upload.speed=256000
|
|
dfrobot_beetle_esp32c3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
dfrobot_beetle_esp32c3.menu.UploadSpeed.230400=230400
|
|
dfrobot_beetle_esp32c3.menu.UploadSpeed.230400.upload.speed=230400
|
|
dfrobot_beetle_esp32c3.menu.UploadSpeed.460800.linux=460800
|
|
dfrobot_beetle_esp32c3.menu.UploadSpeed.460800.macosx=460800
|
|
dfrobot_beetle_esp32c3.menu.UploadSpeed.460800.upload.speed=460800
|
|
dfrobot_beetle_esp32c3.menu.UploadSpeed.512000.windows=512000
|
|
dfrobot_beetle_esp32c3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
dfrobot_beetle_esp32c3.menu.DebugLevel.none=None
|
|
dfrobot_beetle_esp32c3.menu.DebugLevel.none.build.code_debug=0
|
|
dfrobot_beetle_esp32c3.menu.DebugLevel.error=Error
|
|
dfrobot_beetle_esp32c3.menu.DebugLevel.error.build.code_debug=1
|
|
dfrobot_beetle_esp32c3.menu.DebugLevel.warn=Warn
|
|
dfrobot_beetle_esp32c3.menu.DebugLevel.warn.build.code_debug=2
|
|
dfrobot_beetle_esp32c3.menu.DebugLevel.info=Info
|
|
dfrobot_beetle_esp32c3.menu.DebugLevel.info.build.code_debug=3
|
|
dfrobot_beetle_esp32c3.menu.DebugLevel.debug=Debug
|
|
dfrobot_beetle_esp32c3.menu.DebugLevel.debug.build.code_debug=4
|
|
dfrobot_beetle_esp32c3.menu.DebugLevel.verbose=Verbose
|
|
dfrobot_beetle_esp32c3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
dfrobot_beetle_esp32c3.menu.EraseFlash.none=Disabled
|
|
dfrobot_beetle_esp32c3.menu.EraseFlash.none.upload.erase_cmd=
|
|
dfrobot_beetle_esp32c3.menu.EraseFlash.all=Enabled
|
|
dfrobot_beetle_esp32c3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
dfrobot_beetle_esp32c6.name=DFRobot Beetle ESP32-C6
|
|
|
|
dfrobot_beetle_esp32c6.bootloader.tool=esptool_py
|
|
dfrobot_beetle_esp32c6.bootloader.tool.default=esptool_py
|
|
|
|
dfrobot_beetle_esp32c6.upload.tool=esptool_py
|
|
dfrobot_beetle_esp32c6.upload.tool.default=esptool_py
|
|
dfrobot_beetle_esp32c6.upload.tool.network=esp_ota
|
|
|
|
dfrobot_beetle_esp32c6.upload.maximum_size=1310720
|
|
dfrobot_beetle_esp32c6.upload.maximum_data_size=327680
|
|
dfrobot_beetle_esp32c6.upload.flags=
|
|
dfrobot_beetle_esp32c6.upload.extra_flags=
|
|
dfrobot_beetle_esp32c6.upload.use_1200bps_touch=false
|
|
dfrobot_beetle_esp32c6.upload.wait_for_upload_port=false
|
|
|
|
dfrobot_beetle_esp32c6.serial.disableDTR=false
|
|
dfrobot_beetle_esp32c6.serial.disableRTS=false
|
|
|
|
dfrobot_beetle_esp32c6.build.tarch=riscv32
|
|
dfrobot_beetle_esp32c6.build.target=esp
|
|
dfrobot_beetle_esp32c6.build.mcu=esp32c6
|
|
dfrobot_beetle_esp32c6.build.core=esp32
|
|
dfrobot_beetle_esp32c6.build.variant=dfrobot_beetle_esp32c6
|
|
dfrobot_beetle_esp32c6.build.board=DFROBOT_BEETLE_ESP32C6
|
|
dfrobot_beetle_esp32c6.build.bootloader_addr=0x0
|
|
|
|
dfrobot_beetle_esp32c6.build.cdc_on_boot=0
|
|
dfrobot_beetle_esp32c6.build.f_cpu=160000000L
|
|
dfrobot_beetle_esp32c6.build.flash_size=4MB
|
|
dfrobot_beetle_esp32c6.build.flash_freq=80m
|
|
dfrobot_beetle_esp32c6.build.flash_mode=qio
|
|
dfrobot_beetle_esp32c6.build.boot=qio
|
|
dfrobot_beetle_esp32c6.build.partitions=default
|
|
dfrobot_beetle_esp32c6.build.defines=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
dfrobot_beetle_esp32c6.menu.JTAGAdapter.default=Disabled
|
|
dfrobot_beetle_esp32c6.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
dfrobot_beetle_esp32c6.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
dfrobot_beetle_esp32c6.menu.JTAGAdapter.builtin.build.openocdscript=esp32c6-builtin.cfg
|
|
dfrobot_beetle_esp32c6.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
dfrobot_beetle_esp32c6.menu.JTAGAdapter.external=FTDI Adapter
|
|
dfrobot_beetle_esp32c6.menu.JTAGAdapter.external.build.openocdscript=esp32c6-ftdi.cfg
|
|
dfrobot_beetle_esp32c6.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
dfrobot_beetle_esp32c6.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
dfrobot_beetle_esp32c6.menu.JTAGAdapter.bridge.build.openocdscript=esp32c6-bridge.cfg
|
|
dfrobot_beetle_esp32c6.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
dfrobot_beetle_esp32c6.menu.CDCOnBoot.default=Disabled
|
|
dfrobot_beetle_esp32c6.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
dfrobot_beetle_esp32c6.menu.CDCOnBoot.cdc=Enabled
|
|
dfrobot_beetle_esp32c6.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.default.build.partitions=default
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.zigbee=Zigbee 4MB with spiffs
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.zigbee.build.partitions=zigbee
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.zigbee.upload.maximum_size=1310720
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.custom=Custom
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.custom.build.partitions=
|
|
dfrobot_beetle_esp32c6.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
dfrobot_beetle_esp32c6.menu.CPUFreq.160=160MHz (WiFi)
|
|
dfrobot_beetle_esp32c6.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
dfrobot_beetle_esp32c6.menu.CPUFreq.80=80MHz (WiFi)
|
|
dfrobot_beetle_esp32c6.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
dfrobot_beetle_esp32c6.menu.CPUFreq.40=40MHz
|
|
dfrobot_beetle_esp32c6.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
dfrobot_beetle_esp32c6.menu.CPUFreq.20=20MHz
|
|
dfrobot_beetle_esp32c6.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
dfrobot_beetle_esp32c6.menu.CPUFreq.10=10MHz
|
|
dfrobot_beetle_esp32c6.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
dfrobot_beetle_esp32c6.menu.FlashMode.qio=QIO
|
|
dfrobot_beetle_esp32c6.menu.FlashMode.qio.build.flash_mode=dio
|
|
dfrobot_beetle_esp32c6.menu.FlashMode.qio.build.boot=qio
|
|
dfrobot_beetle_esp32c6.menu.FlashMode.dio=DIO
|
|
dfrobot_beetle_esp32c6.menu.FlashMode.dio.build.flash_mode=dio
|
|
dfrobot_beetle_esp32c6.menu.FlashMode.dio.build.boot=dio
|
|
|
|
dfrobot_beetle_esp32c6.menu.FlashFreq.80=80MHz
|
|
dfrobot_beetle_esp32c6.menu.FlashFreq.80.build.flash_freq=80m
|
|
dfrobot_beetle_esp32c6.menu.FlashFreq.40=40MHz
|
|
dfrobot_beetle_esp32c6.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
dfrobot_beetle_esp32c6.menu.FlashSize.4M=4MB (32Mb)
|
|
dfrobot_beetle_esp32c6.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
dfrobot_beetle_esp32c6.menu.UploadSpeed.921600=921600
|
|
dfrobot_beetle_esp32c6.menu.UploadSpeed.921600.upload.speed=921600
|
|
dfrobot_beetle_esp32c6.menu.UploadSpeed.115200=115200
|
|
dfrobot_beetle_esp32c6.menu.UploadSpeed.115200.upload.speed=115200
|
|
dfrobot_beetle_esp32c6.menu.UploadSpeed.256000.windows=256000
|
|
dfrobot_beetle_esp32c6.menu.UploadSpeed.256000.upload.speed=256000
|
|
dfrobot_beetle_esp32c6.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
dfrobot_beetle_esp32c6.menu.UploadSpeed.230400=230400
|
|
dfrobot_beetle_esp32c6.menu.UploadSpeed.230400.upload.speed=230400
|
|
dfrobot_beetle_esp32c6.menu.UploadSpeed.460800.linux=460800
|
|
dfrobot_beetle_esp32c6.menu.UploadSpeed.460800.macosx=460800
|
|
dfrobot_beetle_esp32c6.menu.UploadSpeed.460800.upload.speed=460800
|
|
dfrobot_beetle_esp32c6.menu.UploadSpeed.512000.windows=512000
|
|
dfrobot_beetle_esp32c6.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
dfrobot_beetle_esp32c6.menu.DebugLevel.none=None
|
|
dfrobot_beetle_esp32c6.menu.DebugLevel.none.build.code_debug=0
|
|
dfrobot_beetle_esp32c6.menu.DebugLevel.error=Error
|
|
dfrobot_beetle_esp32c6.menu.DebugLevel.error.build.code_debug=1
|
|
dfrobot_beetle_esp32c6.menu.DebugLevel.warn=Warn
|
|
dfrobot_beetle_esp32c6.menu.DebugLevel.warn.build.code_debug=2
|
|
dfrobot_beetle_esp32c6.menu.DebugLevel.info=Info
|
|
dfrobot_beetle_esp32c6.menu.DebugLevel.info.build.code_debug=3
|
|
dfrobot_beetle_esp32c6.menu.DebugLevel.debug=Debug
|
|
dfrobot_beetle_esp32c6.menu.DebugLevel.debug.build.code_debug=4
|
|
dfrobot_beetle_esp32c6.menu.DebugLevel.verbose=Verbose
|
|
dfrobot_beetle_esp32c6.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
dfrobot_beetle_esp32c6.menu.EraseFlash.none=Disabled
|
|
dfrobot_beetle_esp32c6.menu.EraseFlash.none.upload.erase_cmd=
|
|
dfrobot_beetle_esp32c6.menu.EraseFlash.all=Enabled
|
|
dfrobot_beetle_esp32c6.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
dfrobot_beetle_esp32c6.menu.ZigbeeMode.default=Disabled
|
|
dfrobot_beetle_esp32c6.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
dfrobot_beetle_esp32c6.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
dfrobot_beetle_esp32c6.menu.ZigbeeMode.ed=Zigbee ED (end device)
|
|
dfrobot_beetle_esp32c6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
|
|
dfrobot_beetle_esp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
|
|
dfrobot_beetle_esp32c6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
dfrobot_beetle_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
dfrobot_beetle_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
dfrobot_beetle_esp32c6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
|
|
dfrobot_beetle_esp32c6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
|
|
dfrobot_beetle_esp32c6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
dfrobot_firebeetle2_esp32e.name=FireBeetle 2 ESP32-E
|
|
|
|
dfrobot_firebeetle2_esp32e.upload.tool=esptool_py
|
|
dfrobot_firebeetle2_esp32e.upload.tool.default=esptool_py
|
|
dfrobot_firebeetle2_esp32e.upload.maximum_size=1310720
|
|
dfrobot_firebeetle2_esp32e.upload.maximum_data_size=327680
|
|
dfrobot_firebeetle2_esp32e.upload.flags=
|
|
dfrobot_firebeetle2_esp32e.upload.extra_flags=
|
|
|
|
dfrobot_firebeetle2_esp32e.serial.disableDTR=true
|
|
dfrobot_firebeetle2_esp32e.serial.disableRTS=true
|
|
|
|
dfrobot_firebeetle2_esp32e.build.tarch=xtensa
|
|
dfrobot_firebeetle2_esp32e.build.bootloader_addr=0x1000
|
|
dfrobot_firebeetle2_esp32e.build.target=esp32
|
|
dfrobot_firebeetle2_esp32e.build.mcu=esp32
|
|
dfrobot_firebeetle2_esp32e.build.core=esp32
|
|
dfrobot_firebeetle2_esp32e.build.variant=dfrobot_firebeetle2_esp32e
|
|
dfrobot_firebeetle2_esp32e.build.board=DFROBOT_FIREBEETLE_2_ESP32E
|
|
|
|
dfrobot_firebeetle2_esp32e.build.f_cpu=240000000L
|
|
dfrobot_firebeetle2_esp32e.build.flash_size=4MB
|
|
dfrobot_firebeetle2_esp32e.build.flash_freq=40m
|
|
dfrobot_firebeetle2_esp32e.build.flash_mode=dio
|
|
dfrobot_firebeetle2_esp32e.build.boot=dio
|
|
dfrobot_firebeetle2_esp32e.build.partitions=default
|
|
dfrobot_firebeetle2_esp32e.build.defines=
|
|
dfrobot_firebeetle2_esp32e.build.loop_core=
|
|
dfrobot_firebeetle2_esp32e.build.event_core=
|
|
|
|
dfrobot_firebeetle2_esp32e.menu.PSRAM.disabled=Disabled
|
|
dfrobot_firebeetle2_esp32e.menu.PSRAM.disabled.build.defines=
|
|
dfrobot_firebeetle2_esp32e.menu.PSRAM.disabled.build.extra_libs=
|
|
dfrobot_firebeetle2_esp32e.menu.PSRAM.enabled=Enabled
|
|
dfrobot_firebeetle2_esp32e.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
dfrobot_firebeetle2_esp32e.menu.PSRAM.enabled.build.extra_libs=
|
|
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.default.build.partitions=default
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.default_8MB=8M Flash (3MB APP/1.5MB FAT)
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9MB FATFS)
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
dfrobot_firebeetle2_esp32e.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
dfrobot_firebeetle2_esp32e.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
dfrobot_firebeetle2_esp32e.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
dfrobot_firebeetle2_esp32e.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
dfrobot_firebeetle2_esp32e.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
dfrobot_firebeetle2_esp32e.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
dfrobot_firebeetle2_esp32e.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
dfrobot_firebeetle2_esp32e.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
dfrobot_firebeetle2_esp32e.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
dfrobot_firebeetle2_esp32e.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
dfrobot_firebeetle2_esp32e.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
dfrobot_firebeetle2_esp32e.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
dfrobot_firebeetle2_esp32e.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
dfrobot_firebeetle2_esp32e.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
dfrobot_firebeetle2_esp32e.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
dfrobot_firebeetle2_esp32e.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
dfrobot_firebeetle2_esp32e.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
dfrobot_firebeetle2_esp32e.menu.FlashMode.qio=QIO
|
|
dfrobot_firebeetle2_esp32e.menu.FlashMode.qio.build.flash_mode=dio
|
|
dfrobot_firebeetle2_esp32e.menu.FlashMode.qio.build.boot=qio
|
|
dfrobot_firebeetle2_esp32e.menu.FlashMode.dio=DIO
|
|
dfrobot_firebeetle2_esp32e.menu.FlashMode.dio.build.flash_mode=dio
|
|
dfrobot_firebeetle2_esp32e.menu.FlashMode.dio.build.boot=dio
|
|
|
|
dfrobot_firebeetle2_esp32e.menu.FlashFreq.80=80MHz
|
|
dfrobot_firebeetle2_esp32e.menu.FlashFreq.80.build.flash_freq=80m
|
|
dfrobot_firebeetle2_esp32e.menu.FlashFreq.40=40MHz
|
|
dfrobot_firebeetle2_esp32e.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
dfrobot_firebeetle2_esp32e.menu.FlashSize.4M=4MB (32Mb)
|
|
dfrobot_firebeetle2_esp32e.menu.FlashSize.4M.build.flash_size=4MB
|
|
dfrobot_firebeetle2_esp32e.menu.FlashSize.8M=8MB (64Mb)
|
|
dfrobot_firebeetle2_esp32e.menu.FlashSize.8M.build.flash_size=8MB
|
|
dfrobot_firebeetle2_esp32e.menu.FlashSize.8M.build.partitions=default_8MB
|
|
dfrobot_firebeetle2_esp32e.menu.FlashSize.2M=2MB (16Mb)
|
|
dfrobot_firebeetle2_esp32e.menu.FlashSize.2M.build.flash_size=2MB
|
|
dfrobot_firebeetle2_esp32e.menu.FlashSize.2M.build.partitions=minimal
|
|
dfrobot_firebeetle2_esp32e.menu.FlashSize.16M=16MB (128Mb)
|
|
dfrobot_firebeetle2_esp32e.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
dfrobot_firebeetle2_esp32e.menu.UploadSpeed.921600=921600
|
|
dfrobot_firebeetle2_esp32e.menu.UploadSpeed.921600.upload.speed=921600
|
|
dfrobot_firebeetle2_esp32e.menu.UploadSpeed.115200=115200
|
|
dfrobot_firebeetle2_esp32e.menu.UploadSpeed.115200.upload.speed=115200
|
|
dfrobot_firebeetle2_esp32e.menu.UploadSpeed.256000.windows=256000
|
|
dfrobot_firebeetle2_esp32e.menu.UploadSpeed.256000.upload.speed=256000
|
|
dfrobot_firebeetle2_esp32e.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
dfrobot_firebeetle2_esp32e.menu.UploadSpeed.230400=230400
|
|
dfrobot_firebeetle2_esp32e.menu.UploadSpeed.230400.upload.speed=230400
|
|
dfrobot_firebeetle2_esp32e.menu.UploadSpeed.460800.linux=460800
|
|
dfrobot_firebeetle2_esp32e.menu.UploadSpeed.460800.macosx=460800
|
|
dfrobot_firebeetle2_esp32e.menu.UploadSpeed.460800.upload.speed=460800
|
|
dfrobot_firebeetle2_esp32e.menu.UploadSpeed.512000.windows=512000
|
|
dfrobot_firebeetle2_esp32e.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
dfrobot_firebeetle2_esp32e.menu.LoopCore.1=Core 1
|
|
dfrobot_firebeetle2_esp32e.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
dfrobot_firebeetle2_esp32e.menu.LoopCore.0=Core 0
|
|
dfrobot_firebeetle2_esp32e.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
dfrobot_firebeetle2_esp32e.menu.EventsCore.1=Core 1
|
|
dfrobot_firebeetle2_esp32e.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
dfrobot_firebeetle2_esp32e.menu.EventsCore.0=Core 0
|
|
dfrobot_firebeetle2_esp32e.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
dfrobot_firebeetle2_esp32e.menu.DebugLevel.none=None
|
|
dfrobot_firebeetle2_esp32e.menu.DebugLevel.none.build.code_debug=0
|
|
dfrobot_firebeetle2_esp32e.menu.DebugLevel.error=Error
|
|
dfrobot_firebeetle2_esp32e.menu.DebugLevel.error.build.code_debug=1
|
|
dfrobot_firebeetle2_esp32e.menu.DebugLevel.warn=Warn
|
|
dfrobot_firebeetle2_esp32e.menu.DebugLevel.warn.build.code_debug=2
|
|
dfrobot_firebeetle2_esp32e.menu.DebugLevel.info=Info
|
|
dfrobot_firebeetle2_esp32e.menu.DebugLevel.info.build.code_debug=3
|
|
dfrobot_firebeetle2_esp32e.menu.DebugLevel.debug=Debug
|
|
dfrobot_firebeetle2_esp32e.menu.DebugLevel.debug.build.code_debug=4
|
|
dfrobot_firebeetle2_esp32e.menu.DebugLevel.verbose=Verbose
|
|
dfrobot_firebeetle2_esp32e.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
dfrobot_firebeetle2_esp32e.menu.EraseFlash.none=Disabled
|
|
dfrobot_firebeetle2_esp32e.menu.EraseFlash.none.upload.erase_cmd=
|
|
dfrobot_firebeetle2_esp32e.menu.EraseFlash.all=Enabled
|
|
dfrobot_firebeetle2_esp32e.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
dfrobot_firebeetle2_esp32s3.name=DFRobot Firebeetle 2 ESP32-S3
|
|
|
|
dfrobot_firebeetle2_esp32s3.bootloader.tool=esptool_py
|
|
dfrobot_firebeetle2_esp32s3.bootloader.tool.default=esptool_py
|
|
|
|
dfrobot_firebeetle2_esp32s3.upload.tool=esptool_py
|
|
dfrobot_firebeetle2_esp32s3.upload.tool.default=esptool_py
|
|
dfrobot_firebeetle2_esp32s3.upload.tool.network=esp_ota
|
|
|
|
dfrobot_firebeetle2_esp32s3.upload.maximum_size=1310720
|
|
dfrobot_firebeetle2_esp32s3.upload.maximum_data_size=327680
|
|
dfrobot_firebeetle2_esp32s3.upload.flags=
|
|
dfrobot_firebeetle2_esp32s3.upload.extra_flags=
|
|
dfrobot_firebeetle2_esp32s3.upload.use_1200bps_touch=false
|
|
dfrobot_firebeetle2_esp32s3.upload.wait_for_upload_port=false
|
|
|
|
dfrobot_firebeetle2_esp32s3.serial.disableDTR=false
|
|
dfrobot_firebeetle2_esp32s3.serial.disableRTS=false
|
|
|
|
dfrobot_firebeetle2_esp32s3.build.tarch=xtensa
|
|
dfrobot_firebeetle2_esp32s3.build.bootloader_addr=0x0
|
|
dfrobot_firebeetle2_esp32s3.build.target=esp32s3
|
|
dfrobot_firebeetle2_esp32s3.build.mcu=esp32s3
|
|
dfrobot_firebeetle2_esp32s3.build.core=esp32
|
|
dfrobot_firebeetle2_esp32s3.build.variant=dfrobot_firebeetle2_esp32s3
|
|
dfrobot_firebeetle2_esp32s3.build.board=ESP32S3_DEV
|
|
#dfrobot_firebeetle2_esp32s3.build.board=DFROBOT_FIREBEETLE_2_ESP32S3
|
|
|
|
dfrobot_firebeetle2_esp32s3.build.usb_mode=1
|
|
dfrobot_firebeetle2_esp32s3.build.cdc_on_boot=0
|
|
dfrobot_firebeetle2_esp32s3.build.msc_on_boot=0
|
|
dfrobot_firebeetle2_esp32s3.build.dfu_on_boot=0
|
|
dfrobot_firebeetle2_esp32s3.build.f_cpu=240000000L
|
|
dfrobot_firebeetle2_esp32s3.build.flash_size=4MB
|
|
dfrobot_firebeetle2_esp32s3.build.flash_freq=80m
|
|
dfrobot_firebeetle2_esp32s3.build.flash_mode=dio
|
|
dfrobot_firebeetle2_esp32s3.build.boot=qio
|
|
dfrobot_firebeetle2_esp32s3.build.boot_freq=80m
|
|
dfrobot_firebeetle2_esp32s3.build.partitions=default
|
|
dfrobot_firebeetle2_esp32s3.build.defines=
|
|
dfrobot_firebeetle2_esp32s3.build.loop_core=
|
|
dfrobot_firebeetle2_esp32s3.build.event_core=
|
|
dfrobot_firebeetle2_esp32s3.build.flash_type=qio
|
|
dfrobot_firebeetle2_esp32s3.build.psram_type=qspi
|
|
dfrobot_firebeetle2_esp32s3.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
dfrobot_firebeetle2_esp32s3.menu.PSRAM.disabled=Disabled
|
|
dfrobot_firebeetle2_esp32s3.menu.PSRAM.disabled.build.defines=
|
|
dfrobot_firebeetle2_esp32s3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
dfrobot_firebeetle2_esp32s3.menu.PSRAM.enabled=QSPI PSRAM
|
|
dfrobot_firebeetle2_esp32s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
dfrobot_firebeetle2_esp32s3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
dfrobot_firebeetle2_esp32s3.menu.PSRAM.opi=OPI PSRAM
|
|
dfrobot_firebeetle2_esp32s3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
dfrobot_firebeetle2_esp32s3.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.qio=QIO 80MHz
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.qio.build.flash_mode=dio
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.qio.build.boot=qio
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.qio.build.boot_freq=80m
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.qio.build.flash_freq=80m
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.qio.build.flash_type=qio
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.qio120=QIO 120MHz
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.qio120.build.boot=qio
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.qio120.build.flash_type=qio
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.dio=DIO 80MHz
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.dio.build.flash_mode=dio
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.dio.build.boot=dio
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.dio.build.boot_freq=80m
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.dio.build.flash_freq=80m
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.dio.build.flash_type=qio
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.opi=OPI 80MHz
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.opi.build.flash_mode=dout
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.opi.build.boot=opi
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.opi.build.boot_freq=80m
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.opi.build.flash_freq=80m
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashMode.opi.build.flash_type=opi
|
|
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashSize.4M=4MB (32Mb)
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashSize.4M.build.flash_size=4MB
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashSize.8M=8MB (64Mb)
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashSize.8M.build.flash_size=8MB
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashSize.8M.build.partitions=default_8MB
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashSize.16M=16MB (128Mb)
|
|
dfrobot_firebeetle2_esp32s3.menu.FlashSize.16M.build.flash_size=16MB
|
|
#dfrobot_firebeetle2_esp32s3.menu.FlashSize.32M=32MB (256Mb)
|
|
#dfrobot_firebeetle2_esp32s3.menu.FlashSize.32M.build.flash_size=32MB
|
|
|
|
dfrobot_firebeetle2_esp32s3.menu.LoopCore.1=Core 1
|
|
dfrobot_firebeetle2_esp32s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
dfrobot_firebeetle2_esp32s3.menu.LoopCore.0=Core 0
|
|
dfrobot_firebeetle2_esp32s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
dfrobot_firebeetle2_esp32s3.menu.EventsCore.1=Core 1
|
|
dfrobot_firebeetle2_esp32s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
dfrobot_firebeetle2_esp32s3.menu.EventsCore.0=Core 0
|
|
dfrobot_firebeetle2_esp32s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
dfrobot_firebeetle2_esp32s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
dfrobot_firebeetle2_esp32s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
dfrobot_firebeetle2_esp32s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
dfrobot_firebeetle2_esp32s3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
dfrobot_firebeetle2_esp32s3.menu.CDCOnBoot.default=Disabled
|
|
dfrobot_firebeetle2_esp32s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
dfrobot_firebeetle2_esp32s3.menu.CDCOnBoot.cdc=Enabled
|
|
dfrobot_firebeetle2_esp32s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
dfrobot_firebeetle2_esp32s3.menu.MSCOnBoot.default=Disabled
|
|
dfrobot_firebeetle2_esp32s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
dfrobot_firebeetle2_esp32s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
dfrobot_firebeetle2_esp32s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
dfrobot_firebeetle2_esp32s3.menu.DFUOnBoot.default=Disabled
|
|
dfrobot_firebeetle2_esp32s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
dfrobot_firebeetle2_esp32s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
dfrobot_firebeetle2_esp32s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.default.build.partitions=default
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
dfrobot_firebeetle2_esp32s3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
dfrobot_firebeetle2_esp32s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
dfrobot_firebeetle2_esp32s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
dfrobot_firebeetle2_esp32s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
dfrobot_firebeetle2_esp32s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
dfrobot_firebeetle2_esp32s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
dfrobot_firebeetle2_esp32s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
dfrobot_firebeetle2_esp32s3.menu.CPUFreq.40=40MHz
|
|
dfrobot_firebeetle2_esp32s3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
dfrobot_firebeetle2_esp32s3.menu.CPUFreq.20=20MHz
|
|
dfrobot_firebeetle2_esp32s3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
dfrobot_firebeetle2_esp32s3.menu.CPUFreq.10=10MHz
|
|
dfrobot_firebeetle2_esp32s3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadSpeed.921600=921600
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadSpeed.115200=115200
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadSpeed.256000.windows=256000
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadSpeed.230400=230400
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadSpeed.460800.linux=460800
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadSpeed.460800.macosx=460800
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadSpeed.512000.windows=512000
|
|
dfrobot_firebeetle2_esp32s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
dfrobot_firebeetle2_esp32s3.menu.DebugLevel.none=None
|
|
dfrobot_firebeetle2_esp32s3.menu.DebugLevel.none.build.code_debug=0
|
|
dfrobot_firebeetle2_esp32s3.menu.DebugLevel.error=Error
|
|
dfrobot_firebeetle2_esp32s3.menu.DebugLevel.error.build.code_debug=1
|
|
dfrobot_firebeetle2_esp32s3.menu.DebugLevel.warn=Warn
|
|
dfrobot_firebeetle2_esp32s3.menu.DebugLevel.warn.build.code_debug=2
|
|
dfrobot_firebeetle2_esp32s3.menu.DebugLevel.info=Info
|
|
dfrobot_firebeetle2_esp32s3.menu.DebugLevel.info.build.code_debug=3
|
|
dfrobot_firebeetle2_esp32s3.menu.DebugLevel.debug=Debug
|
|
dfrobot_firebeetle2_esp32s3.menu.DebugLevel.debug.build.code_debug=4
|
|
dfrobot_firebeetle2_esp32s3.menu.DebugLevel.verbose=Verbose
|
|
dfrobot_firebeetle2_esp32s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
dfrobot_firebeetle2_esp32s3.menu.EraseFlash.none=Disabled
|
|
dfrobot_firebeetle2_esp32s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
dfrobot_firebeetle2_esp32s3.menu.EraseFlash.all=Enabled
|
|
dfrobot_firebeetle2_esp32s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
dfrobot_firebeetle2_esp32c6.name=DFRobot FireBeetle 2 ESP32-C6
|
|
|
|
dfrobot_firebeetle2_esp32c6.bootloader.tool=esptool_py
|
|
dfrobot_firebeetle2_esp32c6.bootloader.tool.default=esptool_py
|
|
|
|
dfrobot_firebeetle2_esp32c6.upload.tool=esptool_py
|
|
dfrobot_firebeetle2_esp32c6.upload.tool.default=esptool_py
|
|
dfrobot_firebeetle2_esp32c6.upload.tool.network=esp_ota
|
|
|
|
dfrobot_firebeetle2_esp32c6.upload.maximum_size=1310720
|
|
dfrobot_firebeetle2_esp32c6.upload.maximum_data_size=327680
|
|
dfrobot_firebeetle2_esp32c6.upload.flags=
|
|
dfrobot_firebeetle2_esp32c6.upload.extra_flags=
|
|
dfrobot_firebeetle2_esp32c6.upload.use_1200bps_touch=false
|
|
dfrobot_firebeetle2_esp32c6.upload.wait_for_upload_port=false
|
|
|
|
dfrobot_firebeetle2_esp32c6.serial.disableDTR=false
|
|
dfrobot_firebeetle2_esp32c6.serial.disableRTS=false
|
|
|
|
dfrobot_firebeetle2_esp32c6.build.tarch=riscv32
|
|
dfrobot_firebeetle2_esp32c6.build.target=esp
|
|
dfrobot_firebeetle2_esp32c6.build.mcu=esp32c6
|
|
dfrobot_firebeetle2_esp32c6.build.core=esp32
|
|
dfrobot_firebeetle2_esp32c6.build.variant=dfrobot_firebeetle2_esp32c6
|
|
dfrobot_firebeetle2_esp32c6.build.board=DFROBOT_FIREBEETLE_2_ESP32C6
|
|
dfrobot_firebeetle2_esp32c6.build.bootloader_addr=0x0
|
|
|
|
dfrobot_firebeetle2_esp32c6.build.cdc_on_boot=0
|
|
dfrobot_firebeetle2_esp32c6.build.f_cpu=160000000L
|
|
dfrobot_firebeetle2_esp32c6.build.flash_size=4MB
|
|
dfrobot_firebeetle2_esp32c6.build.flash_freq=80m
|
|
dfrobot_firebeetle2_esp32c6.build.flash_mode=qio
|
|
dfrobot_firebeetle2_esp32c6.build.boot=qio
|
|
dfrobot_firebeetle2_esp32c6.build.partitions=default
|
|
dfrobot_firebeetle2_esp32c6.build.defines=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
dfrobot_firebeetle2_esp32c6.menu.JTAGAdapter.default=Disabled
|
|
dfrobot_firebeetle2_esp32c6.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
dfrobot_firebeetle2_esp32c6.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
dfrobot_firebeetle2_esp32c6.menu.JTAGAdapter.builtin.build.openocdscript=esp32c6-builtin.cfg
|
|
dfrobot_firebeetle2_esp32c6.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
dfrobot_firebeetle2_esp32c6.menu.JTAGAdapter.external=FTDI Adapter
|
|
dfrobot_firebeetle2_esp32c6.menu.JTAGAdapter.external.build.openocdscript=esp32c6-ftdi.cfg
|
|
dfrobot_firebeetle2_esp32c6.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
dfrobot_firebeetle2_esp32c6.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
dfrobot_firebeetle2_esp32c6.menu.JTAGAdapter.bridge.build.openocdscript=esp32c6-bridge.cfg
|
|
dfrobot_firebeetle2_esp32c6.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
dfrobot_firebeetle2_esp32c6.menu.CDCOnBoot.default=Disabled
|
|
dfrobot_firebeetle2_esp32c6.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
dfrobot_firebeetle2_esp32c6.menu.CDCOnBoot.cdc=Enabled
|
|
dfrobot_firebeetle2_esp32c6.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.default.build.partitions=default
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.zigbee=Zigbee 4MB with spiffs
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.zigbee.build.partitions=zigbee
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.zigbee.upload.maximum_size=1310720
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.custom=Custom
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.custom.build.partitions=
|
|
dfrobot_firebeetle2_esp32c6.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
dfrobot_firebeetle2_esp32c6.menu.CPUFreq.160=160MHz (WiFi)
|
|
dfrobot_firebeetle2_esp32c6.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
dfrobot_firebeetle2_esp32c6.menu.CPUFreq.80=80MHz (WiFi)
|
|
dfrobot_firebeetle2_esp32c6.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
dfrobot_firebeetle2_esp32c6.menu.CPUFreq.40=40MHz
|
|
dfrobot_firebeetle2_esp32c6.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
dfrobot_firebeetle2_esp32c6.menu.CPUFreq.20=20MHz
|
|
dfrobot_firebeetle2_esp32c6.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
dfrobot_firebeetle2_esp32c6.menu.CPUFreq.10=10MHz
|
|
dfrobot_firebeetle2_esp32c6.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
dfrobot_firebeetle2_esp32c6.menu.FlashMode.qio=QIO
|
|
dfrobot_firebeetle2_esp32c6.menu.FlashMode.qio.build.flash_mode=dio
|
|
dfrobot_firebeetle2_esp32c6.menu.FlashMode.qio.build.boot=qio
|
|
dfrobot_firebeetle2_esp32c6.menu.FlashMode.dio=DIO
|
|
dfrobot_firebeetle2_esp32c6.menu.FlashMode.dio.build.flash_mode=dio
|
|
dfrobot_firebeetle2_esp32c6.menu.FlashMode.dio.build.boot=dio
|
|
|
|
dfrobot_firebeetle2_esp32c6.menu.FlashFreq.80=80MHz
|
|
dfrobot_firebeetle2_esp32c6.menu.FlashFreq.80.build.flash_freq=80m
|
|
dfrobot_firebeetle2_esp32c6.menu.FlashFreq.40=40MHz
|
|
dfrobot_firebeetle2_esp32c6.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
dfrobot_firebeetle2_esp32c6.menu.FlashSize.4M=4MB (32Mb)
|
|
dfrobot_firebeetle2_esp32c6.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
dfrobot_firebeetle2_esp32c6.menu.UploadSpeed.921600=921600
|
|
dfrobot_firebeetle2_esp32c6.menu.UploadSpeed.921600.upload.speed=921600
|
|
dfrobot_firebeetle2_esp32c6.menu.UploadSpeed.115200=115200
|
|
dfrobot_firebeetle2_esp32c6.menu.UploadSpeed.115200.upload.speed=115200
|
|
dfrobot_firebeetle2_esp32c6.menu.UploadSpeed.256000.windows=256000
|
|
dfrobot_firebeetle2_esp32c6.menu.UploadSpeed.256000.upload.speed=256000
|
|
dfrobot_firebeetle2_esp32c6.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
dfrobot_firebeetle2_esp32c6.menu.UploadSpeed.230400=230400
|
|
dfrobot_firebeetle2_esp32c6.menu.UploadSpeed.230400.upload.speed=230400
|
|
dfrobot_firebeetle2_esp32c6.menu.UploadSpeed.460800.linux=460800
|
|
dfrobot_firebeetle2_esp32c6.menu.UploadSpeed.460800.macosx=460800
|
|
dfrobot_firebeetle2_esp32c6.menu.UploadSpeed.460800.upload.speed=460800
|
|
dfrobot_firebeetle2_esp32c6.menu.UploadSpeed.512000.windows=512000
|
|
dfrobot_firebeetle2_esp32c6.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
dfrobot_firebeetle2_esp32c6.menu.DebugLevel.none=None
|
|
dfrobot_firebeetle2_esp32c6.menu.DebugLevel.none.build.code_debug=0
|
|
dfrobot_firebeetle2_esp32c6.menu.DebugLevel.error=Error
|
|
dfrobot_firebeetle2_esp32c6.menu.DebugLevel.error.build.code_debug=1
|
|
dfrobot_firebeetle2_esp32c6.menu.DebugLevel.warn=Warn
|
|
dfrobot_firebeetle2_esp32c6.menu.DebugLevel.warn.build.code_debug=2
|
|
dfrobot_firebeetle2_esp32c6.menu.DebugLevel.info=Info
|
|
dfrobot_firebeetle2_esp32c6.menu.DebugLevel.info.build.code_debug=3
|
|
dfrobot_firebeetle2_esp32c6.menu.DebugLevel.debug=Debug
|
|
dfrobot_firebeetle2_esp32c6.menu.DebugLevel.debug.build.code_debug=4
|
|
dfrobot_firebeetle2_esp32c6.menu.DebugLevel.verbose=Verbose
|
|
dfrobot_firebeetle2_esp32c6.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
dfrobot_firebeetle2_esp32c6.menu.EraseFlash.none=Disabled
|
|
dfrobot_firebeetle2_esp32c6.menu.EraseFlash.none.upload.erase_cmd=
|
|
dfrobot_firebeetle2_esp32c6.menu.EraseFlash.all=Enabled
|
|
dfrobot_firebeetle2_esp32c6.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.default=Disabled
|
|
dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.ed=Zigbee ED (end device)
|
|
dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
|
|
dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
|
|
dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
|
|
dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
|
|
dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
# dfrobot Romeo ESP32-S3
|
|
dfrobot_romeo_esp32s3.name=DFRobot Romeo ESP32-S3
|
|
|
|
dfrobot_romeo_esp32s3.bootloader.tool=esptool_py
|
|
dfrobot_romeo_esp32s3.bootloader.tool.default=esptool_py
|
|
|
|
dfrobot_romeo_esp32s3.upload.tool=esptool_py
|
|
dfrobot_romeo_esp32s3.upload.tool.default=esptool_py
|
|
dfrobot_romeo_esp32s3.upload.tool.network=esp_ota
|
|
|
|
dfrobot_romeo_esp32s3.upload.maximum_size=1310720
|
|
dfrobot_romeo_esp32s3.upload.maximum_data_size=327680
|
|
dfrobot_romeo_esp32s3.upload.flags=
|
|
dfrobot_romeo_esp32s3.upload.extra_flags=
|
|
dfrobot_romeo_esp32s3.upload.use_1200bps_touch=false
|
|
dfrobot_romeo_esp32s3.upload.wait_for_upload_port=false
|
|
|
|
dfrobot_romeo_esp32s3.serial.disableDTR=false
|
|
dfrobot_romeo_esp32s3.serial.disableRTS=false
|
|
|
|
dfrobot_romeo_esp32s3.build.tarch=xtensa
|
|
dfrobot_romeo_esp32s3.build.bootloader_addr=0x0
|
|
dfrobot_romeo_esp32s3.build.target=esp32s3
|
|
dfrobot_romeo_esp32s3.build.mcu=esp32s3
|
|
dfrobot_romeo_esp32s3.build.core=esp32
|
|
dfrobot_romeo_esp32s3.build.variant=dfrobot_romeo_esp32s3
|
|
dfrobot_romeo_esp32s3.build.board=DFROBOT_ROMEO_ESP32S3
|
|
|
|
|
|
dfrobot_romeo_esp32s3.build.usb_mode=1
|
|
dfrobot_romeo_esp32s3.build.cdc_on_boot=0
|
|
dfrobot_romeo_esp32s3.build.msc_on_boot=0
|
|
dfrobot_romeo_esp32s3.build.dfu_on_boot=0
|
|
dfrobot_romeo_esp32s3.build.f_cpu=240000000L
|
|
dfrobot_romeo_esp32s3.build.flash_size=16MB
|
|
dfrobot_romeo_esp32s3.build.flash_freq=80m
|
|
dfrobot_romeo_esp32s3.build.flash_mode=qio
|
|
dfrobot_romeo_esp32s3.build.boot=qio
|
|
dfrobot_romeo_esp32s3.build.boot_freq=80m
|
|
dfrobot_romeo_esp32s3.build.partitions=default
|
|
dfrobot_romeo_esp32s3.build.defines=
|
|
dfrobot_romeo_esp32s3.build.loop_core=
|
|
dfrobot_romeo_esp32s3.build.event_core=
|
|
dfrobot_romeo_esp32s3.build.flash_type=qio
|
|
dfrobot_romeo_esp32s3.build.psram_type=qspi
|
|
dfrobot_romeo_esp32s3.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
dfrobot_romeo_esp32s3.menu.PSRAM.opi=OPI PSRAM
|
|
dfrobot_romeo_esp32s3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
dfrobot_romeo_esp32s3.menu.PSRAM.opi.build.psram_type=opi
|
|
dfrobot_romeo_esp32s3.menu.PSRAM.disabled=Disabled
|
|
dfrobot_romeo_esp32s3.menu.PSRAM.disabled.build.defines=
|
|
dfrobot_romeo_esp32s3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
dfrobot_romeo_esp32s3.menu.PSRAM.enabled=QSPI PSRAM
|
|
dfrobot_romeo_esp32s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
dfrobot_romeo_esp32s3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
|
|
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.qio=QIO 80MHz
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.qio.build.flash_mode=dio
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.qio.build.boot=qio
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.qio.build.boot_freq=80m
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.qio.build.flash_freq=80m
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.qio.build.flash_type=qio
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.qio120=QIO 120MHz
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.qio120.build.boot=qio
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.qio120.build.flash_type=qio
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.dio=DIO 80MHz
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.dio.build.flash_mode=dio
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.dio.build.boot=dio
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.dio.build.boot_freq=80m
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.dio.build.flash_freq=80m
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.dio.build.flash_type=qio
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.opi=OPI 80MHz
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.opi.build.flash_mode=dout
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.opi.build.boot=opi
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.opi.build.boot_freq=80m
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.opi.build.flash_freq=80m
|
|
dfrobot_romeo_esp32s3.menu.FlashMode.opi.build.flash_type=opi
|
|
|
|
dfrobot_romeo_esp32s3.menu.FlashSize.16M=16MB (128Mb)
|
|
dfrobot_romeo_esp32s3.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
|
|
dfrobot_romeo_esp32s3.menu.LoopCore.1=Core 1
|
|
dfrobot_romeo_esp32s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
dfrobot_romeo_esp32s3.menu.LoopCore.0=Core 0
|
|
dfrobot_romeo_esp32s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
dfrobot_romeo_esp32s3.menu.EventsCore.1=Core 1
|
|
dfrobot_romeo_esp32s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
dfrobot_romeo_esp32s3.menu.EventsCore.0=Core 0
|
|
dfrobot_romeo_esp32s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
dfrobot_romeo_esp32s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
dfrobot_romeo_esp32s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
dfrobot_romeo_esp32s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
dfrobot_romeo_esp32s3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
dfrobot_romeo_esp32s3.menu.CDCOnBoot.cdc=Enabled
|
|
dfrobot_romeo_esp32s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
dfrobot_romeo_esp32s3.menu.CDCOnBoot.default=Disabled
|
|
dfrobot_romeo_esp32s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
|
|
dfrobot_romeo_esp32s3.menu.MSCOnBoot.default=Disabled
|
|
dfrobot_romeo_esp32s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
dfrobot_romeo_esp32s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
dfrobot_romeo_esp32s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
dfrobot_romeo_esp32s3.menu.DFUOnBoot.default=Disabled
|
|
dfrobot_romeo_esp32s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
dfrobot_romeo_esp32s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
dfrobot_romeo_esp32s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
dfrobot_romeo_esp32s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
dfrobot_romeo_esp32s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
dfrobot_romeo_esp32s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
dfrobot_romeo_esp32s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
dfrobot_romeo_esp32s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
dfrobot_romeo_esp32s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
dfrobot_romeo_esp32s3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
dfrobot_romeo_esp32s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
dfrobot_romeo_esp32s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
dfrobot_romeo_esp32s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
dfrobot_romeo_esp32s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
dfrobot_romeo_esp32s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
dfrobot_romeo_esp32s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
dfrobot_romeo_esp32s3.menu.CPUFreq.40=40MHz
|
|
dfrobot_romeo_esp32s3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
dfrobot_romeo_esp32s3.menu.CPUFreq.20=20MHz
|
|
dfrobot_romeo_esp32s3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
dfrobot_romeo_esp32s3.menu.CPUFreq.10=10MHz
|
|
dfrobot_romeo_esp32s3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
dfrobot_romeo_esp32s3.menu.UploadSpeed.921600=921600
|
|
dfrobot_romeo_esp32s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
dfrobot_romeo_esp32s3.menu.UploadSpeed.115200=115200
|
|
dfrobot_romeo_esp32s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
dfrobot_romeo_esp32s3.menu.UploadSpeed.256000.windows=256000
|
|
dfrobot_romeo_esp32s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
dfrobot_romeo_esp32s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
dfrobot_romeo_esp32s3.menu.UploadSpeed.230400=230400
|
|
dfrobot_romeo_esp32s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
dfrobot_romeo_esp32s3.menu.UploadSpeed.460800.linux=460800
|
|
dfrobot_romeo_esp32s3.menu.UploadSpeed.460800.macosx=460800
|
|
dfrobot_romeo_esp32s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
dfrobot_romeo_esp32s3.menu.UploadSpeed.512000.windows=512000
|
|
dfrobot_romeo_esp32s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
dfrobot_romeo_esp32s3.menu.DebugLevel.none=None
|
|
dfrobot_romeo_esp32s3.menu.DebugLevel.none.build.code_debug=0
|
|
dfrobot_romeo_esp32s3.menu.DebugLevel.error=Error
|
|
dfrobot_romeo_esp32s3.menu.DebugLevel.error.build.code_debug=1
|
|
dfrobot_romeo_esp32s3.menu.DebugLevel.warn=Warn
|
|
dfrobot_romeo_esp32s3.menu.DebugLevel.warn.build.code_debug=2
|
|
dfrobot_romeo_esp32s3.menu.DebugLevel.info=Info
|
|
dfrobot_romeo_esp32s3.menu.DebugLevel.info.build.code_debug=3
|
|
dfrobot_romeo_esp32s3.menu.DebugLevel.debug=Debug
|
|
dfrobot_romeo_esp32s3.menu.DebugLevel.debug.build.code_debug=4
|
|
dfrobot_romeo_esp32s3.menu.DebugLevel.verbose=Verbose
|
|
dfrobot_romeo_esp32s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
dfrobot_romeo_esp32s3.menu.EraseFlash.none=Disabled
|
|
dfrobot_romeo_esp32s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
dfrobot_romeo_esp32s3.menu.EraseFlash.all=Enabled
|
|
dfrobot_romeo_esp32s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
firebeetle32.name=FireBeetle-ESP32
|
|
|
|
firebeetle32.bootloader.tool=esptool_py
|
|
firebeetle32.bootloader.tool.default=esptool_py
|
|
|
|
firebeetle32.upload.tool=esptool_py
|
|
firebeetle32.upload.tool.default=esptool_py
|
|
firebeetle32.upload.tool.network=esp_ota
|
|
|
|
firebeetle32.upload.maximum_size=1310720
|
|
firebeetle32.upload.maximum_data_size=327680
|
|
firebeetle32.upload.flags=
|
|
firebeetle32.upload.extra_flags=
|
|
|
|
firebeetle32.serial.disableDTR=true
|
|
firebeetle32.serial.disableRTS=true
|
|
|
|
firebeetle32.build.tarch=xtensa
|
|
firebeetle32.build.bootloader_addr=0x1000
|
|
firebeetle32.build.target=esp32
|
|
firebeetle32.build.mcu=esp32
|
|
firebeetle32.build.core=esp32
|
|
firebeetle32.build.variant=firebeetle32
|
|
firebeetle32.build.board=DFROBOT_FIREBEETLE_ESP32
|
|
|
|
firebeetle32.build.f_cpu=240000000L
|
|
firebeetle32.build.flash_mode=dio
|
|
firebeetle32.build.flash_size=4MB
|
|
firebeetle32.build.boot=dio
|
|
firebeetle32.build.partitions=default
|
|
firebeetle32.build.defines=
|
|
|
|
firebeetle32.menu.FlashFreq.80=80MHz
|
|
firebeetle32.menu.FlashFreq.80.build.flash_freq=80m
|
|
firebeetle32.menu.FlashFreq.40=40MHz
|
|
firebeetle32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
firebeetle32.menu.UploadSpeed.921600=921600
|
|
firebeetle32.menu.UploadSpeed.921600.upload.speed=921600
|
|
firebeetle32.menu.UploadSpeed.115200=115200
|
|
firebeetle32.menu.UploadSpeed.115200.upload.speed=115200
|
|
firebeetle32.menu.UploadSpeed.256000.windows=256000
|
|
firebeetle32.menu.UploadSpeed.256000.upload.speed=256000
|
|
firebeetle32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
firebeetle32.menu.UploadSpeed.230400=230400
|
|
firebeetle32.menu.UploadSpeed.230400.upload.speed=230400
|
|
firebeetle32.menu.UploadSpeed.460800.linux=460800
|
|
firebeetle32.menu.UploadSpeed.460800.macosx=460800
|
|
firebeetle32.menu.UploadSpeed.460800.upload.speed=460800
|
|
firebeetle32.menu.UploadSpeed.512000.windows=512000
|
|
firebeetle32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
firebeetle32.menu.DebugLevel.none=None
|
|
firebeetle32.menu.DebugLevel.none.build.code_debug=0
|
|
firebeetle32.menu.DebugLevel.error=Error
|
|
firebeetle32.menu.DebugLevel.error.build.code_debug=1
|
|
firebeetle32.menu.DebugLevel.warn=Warn
|
|
firebeetle32.menu.DebugLevel.warn.build.code_debug=2
|
|
firebeetle32.menu.DebugLevel.info=Info
|
|
firebeetle32.menu.DebugLevel.info.build.code_debug=3
|
|
firebeetle32.menu.DebugLevel.debug=Debug
|
|
firebeetle32.menu.DebugLevel.debug.build.code_debug=4
|
|
firebeetle32.menu.DebugLevel.verbose=Verbose
|
|
firebeetle32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
firebeetle32.menu.EraseFlash.none=Disabled
|
|
firebeetle32.menu.EraseFlash.none.upload.erase_cmd=
|
|
firebeetle32.menu.EraseFlash.all=Enabled
|
|
firebeetle32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
intorobot-fig.name=IntoRobot Fig
|
|
|
|
intorobot-fig.bootloader.tool=esptool_py
|
|
intorobot-fig.bootloader.tool.default=esptool_py
|
|
|
|
intorobot-fig.upload.tool=esptool_py
|
|
intorobot-fig.upload.tool.default=esptool_py
|
|
intorobot-fig.upload.tool.network=esp_ota
|
|
|
|
intorobot-fig.upload.maximum_size=1310720
|
|
intorobot-fig.upload.maximum_data_size=327680
|
|
intorobot-fig.upload.flags=
|
|
intorobot-fig.upload.extra_flags=
|
|
|
|
intorobot-fig.serial.disableDTR=true
|
|
intorobot-fig.serial.disableRTS=true
|
|
|
|
intorobot-fig.build.tarch=xtensa
|
|
intorobot-fig.build.bootloader_addr=0x1000
|
|
intorobot-fig.build.target=esp32
|
|
intorobot-fig.build.mcu=esp32
|
|
intorobot-fig.build.core=esp32
|
|
intorobot-fig.build.variant=intorobot-fig
|
|
intorobot-fig.build.board=INTOROBOT_ESP32_DEV
|
|
|
|
intorobot-fig.build.f_cpu=240000000L
|
|
intorobot-fig.build.flash_mode=dio
|
|
intorobot-fig.build.flash_size=4MB
|
|
intorobot-fig.build.boot=dio
|
|
intorobot-fig.build.partitions=default
|
|
intorobot-fig.build.defines=
|
|
|
|
intorobot-fig.menu.FlashFreq.80=80MHz
|
|
intorobot-fig.menu.FlashFreq.80.build.flash_freq=80m
|
|
intorobot-fig.menu.FlashFreq.40=40MHz
|
|
intorobot-fig.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
intorobot-fig.menu.UploadSpeed.921600=921600
|
|
intorobot-fig.menu.UploadSpeed.921600.upload.speed=921600
|
|
intorobot-fig.menu.UploadSpeed.115200=115200
|
|
intorobot-fig.menu.UploadSpeed.115200.upload.speed=115200
|
|
intorobot-fig.menu.UploadSpeed.256000.windows=256000
|
|
intorobot-fig.menu.UploadSpeed.256000.upload.speed=256000
|
|
intorobot-fig.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
intorobot-fig.menu.UploadSpeed.230400=230400
|
|
intorobot-fig.menu.UploadSpeed.230400.upload.speed=230400
|
|
intorobot-fig.menu.UploadSpeed.460800.linux=460800
|
|
intorobot-fig.menu.UploadSpeed.460800.macosx=460800
|
|
intorobot-fig.menu.UploadSpeed.460800.upload.speed=460800
|
|
intorobot-fig.menu.UploadSpeed.512000.windows=512000
|
|
intorobot-fig.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
intorobot-fig.menu.DebugLevel.none=None
|
|
intorobot-fig.menu.DebugLevel.none.build.code_debug=0
|
|
intorobot-fig.menu.DebugLevel.error=Error
|
|
intorobot-fig.menu.DebugLevel.error.build.code_debug=1
|
|
intorobot-fig.menu.DebugLevel.warn=Warn
|
|
intorobot-fig.menu.DebugLevel.warn.build.code_debug=2
|
|
intorobot-fig.menu.DebugLevel.info=Info
|
|
intorobot-fig.menu.DebugLevel.info.build.code_debug=3
|
|
intorobot-fig.menu.DebugLevel.debug=Debug
|
|
intorobot-fig.menu.DebugLevel.debug.build.code_debug=4
|
|
intorobot-fig.menu.DebugLevel.verbose=Verbose
|
|
intorobot-fig.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
intorobot-fig.menu.EraseFlash.none=Disabled
|
|
intorobot-fig.menu.EraseFlash.none.upload.erase_cmd=
|
|
intorobot-fig.menu.EraseFlash.all=Enabled
|
|
intorobot-fig.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
onehorse32dev.name=Onehorse ESP32 Dev Module
|
|
|
|
onehorse32dev.bootloader.tool=esptool_py
|
|
onehorse32dev.bootloader.tool.default=esptool_py
|
|
|
|
onehorse32dev.upload.tool=esptool_py
|
|
onehorse32dev.upload.tool.default=esptool_py
|
|
onehorse32dev.upload.tool.network=esp_ota
|
|
|
|
onehorse32dev.upload.maximum_size=1310720
|
|
onehorse32dev.upload.maximum_data_size=327680
|
|
onehorse32dev.upload.flags=
|
|
onehorse32dev.upload.extra_flags=
|
|
|
|
onehorse32dev.serial.disableDTR=true
|
|
onehorse32dev.serial.disableRTS=true
|
|
|
|
onehorse32dev.build.tarch=xtensa
|
|
onehorse32dev.build.bootloader_addr=0x1000
|
|
onehorse32dev.build.target=esp32
|
|
onehorse32dev.build.mcu=esp32
|
|
onehorse32dev.build.core=esp32
|
|
onehorse32dev.build.variant=onehorse32dev
|
|
onehorse32dev.build.board=ONEHORSE_ESP32_DEV
|
|
|
|
onehorse32dev.build.f_cpu=240000000L
|
|
onehorse32dev.build.flash_mode=dout
|
|
onehorse32dev.build.flash_size=4MB
|
|
onehorse32dev.build.boot=dio
|
|
onehorse32dev.build.partitions=default
|
|
onehorse32dev.build.defines=
|
|
|
|
onehorse32dev.menu.FlashFreq.80=80MHz
|
|
onehorse32dev.menu.FlashFreq.80.build.flash_freq=80m
|
|
onehorse32dev.menu.FlashFreq.40=40MHz
|
|
onehorse32dev.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
onehorse32dev.menu.UploadSpeed.921600=921600
|
|
onehorse32dev.menu.UploadSpeed.921600.upload.speed=921600
|
|
onehorse32dev.menu.UploadSpeed.115200=115200
|
|
onehorse32dev.menu.UploadSpeed.115200.upload.speed=115200
|
|
onehorse32dev.menu.UploadSpeed.256000.windows=256000
|
|
onehorse32dev.menu.UploadSpeed.256000.upload.speed=256000
|
|
onehorse32dev.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
onehorse32dev.menu.UploadSpeed.230400=230400
|
|
onehorse32dev.menu.UploadSpeed.230400.upload.speed=230400
|
|
onehorse32dev.menu.UploadSpeed.460800.linux=460800
|
|
onehorse32dev.menu.UploadSpeed.460800.macosx=460800
|
|
onehorse32dev.menu.UploadSpeed.460800.upload.speed=460800
|
|
onehorse32dev.menu.UploadSpeed.512000.windows=512000
|
|
onehorse32dev.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
onehorse32dev.menu.DebugLevel.none=None
|
|
onehorse32dev.menu.DebugLevel.none.build.code_debug=0
|
|
onehorse32dev.menu.DebugLevel.error=Error
|
|
onehorse32dev.menu.DebugLevel.error.build.code_debug=1
|
|
onehorse32dev.menu.DebugLevel.warn=Warn
|
|
onehorse32dev.menu.DebugLevel.warn.build.code_debug=2
|
|
onehorse32dev.menu.DebugLevel.info=Info
|
|
onehorse32dev.menu.DebugLevel.info.build.code_debug=3
|
|
onehorse32dev.menu.DebugLevel.debug=Debug
|
|
onehorse32dev.menu.DebugLevel.debug.build.code_debug=4
|
|
onehorse32dev.menu.DebugLevel.verbose=Verbose
|
|
onehorse32dev.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
onehorse32dev.menu.EraseFlash.none=Disabled
|
|
onehorse32dev.menu.EraseFlash.none.upload.erase_cmd=
|
|
onehorse32dev.menu.EraseFlash.all=Enabled
|
|
onehorse32dev.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
# Adafruit Metro ESP32-S2
|
|
|
|
adafruit_metro_esp32s2.name=Adafruit Metro ESP32-S2
|
|
adafruit_metro_esp32s2.vid.0=0x239A
|
|
adafruit_metro_esp32s2.pid.0=0x80DF
|
|
adafruit_metro_esp32s2.vid.1=0x239A
|
|
adafruit_metro_esp32s2.pid.1=0x00DF
|
|
adafruit_metro_esp32s2.vid.2=0x239A
|
|
adafruit_metro_esp32s2.pid.2=0x80E0
|
|
adafruit_metro_esp32s2.upload_port.0.vid=0x239A
|
|
adafruit_metro_esp32s2.upload_port.0.pid=0x80DF
|
|
adafruit_metro_esp32s2.upload_port.1.vid=0x239A
|
|
adafruit_metro_esp32s2.upload_port.1.pid=0x00DF
|
|
adafruit_metro_esp32s2.upload_port.2.vid=0x239A
|
|
adafruit_metro_esp32s2.upload_port.2.pid=0x80E0
|
|
|
|
adafruit_metro_esp32s2.bootloader.tool=esptool_py
|
|
adafruit_metro_esp32s2.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_metro_esp32s2.upload.tool=esptool_py
|
|
adafruit_metro_esp32s2.upload.tool.default=esptool_py
|
|
adafruit_metro_esp32s2.upload.tool.network=esp_ota
|
|
|
|
adafruit_metro_esp32s2.upload.maximum_size=1310720
|
|
adafruit_metro_esp32s2.upload.maximum_data_size=327680
|
|
adafruit_metro_esp32s2.upload.flags=
|
|
adafruit_metro_esp32s2.upload.extra_flags=
|
|
adafruit_metro_esp32s2.upload.use_1200bps_touch=true
|
|
adafruit_metro_esp32s2.upload.wait_for_upload_port=true
|
|
|
|
adafruit_metro_esp32s2.serial.disableDTR=false
|
|
adafruit_metro_esp32s2.serial.disableRTS=false
|
|
|
|
adafruit_metro_esp32s2.build.tarch=xtensa
|
|
adafruit_metro_esp32s2.build.bootloader_addr=0x1000
|
|
adafruit_metro_esp32s2.build.target=esp32s2
|
|
adafruit_metro_esp32s2.build.mcu=esp32s2
|
|
adafruit_metro_esp32s2.build.core=esp32
|
|
adafruit_metro_esp32s2.build.variant=adafruit_metro_esp32s2
|
|
adafruit_metro_esp32s2.build.board=METRO_ESP32S2
|
|
|
|
adafruit_metro_esp32s2.build.cdc_on_boot=1
|
|
adafruit_metro_esp32s2.build.msc_on_boot=0
|
|
adafruit_metro_esp32s2.build.dfu_on_boot=0
|
|
adafruit_metro_esp32s2.build.f_cpu=240000000L
|
|
adafruit_metro_esp32s2.build.flash_size=4MB
|
|
adafruit_metro_esp32s2.build.flash_freq=80m
|
|
adafruit_metro_esp32s2.build.flash_mode=dio
|
|
adafruit_metro_esp32s2.build.boot=qio
|
|
adafruit_metro_esp32s2.build.partitions=default
|
|
adafruit_metro_esp32s2.build.defines=
|
|
|
|
adafruit_metro_esp32s2.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_metro_esp32s2.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_metro_esp32s2.menu.CDCOnBoot.default=Disabled
|
|
adafruit_metro_esp32s2.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_metro_esp32s2.menu.MSCOnBoot.default=Disabled
|
|
adafruit_metro_esp32s2.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
adafruit_metro_esp32s2.menu.MSCOnBoot.msc=Enabled
|
|
adafruit_metro_esp32s2.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
adafruit_metro_esp32s2.menu.DFUOnBoot.default=Disabled
|
|
adafruit_metro_esp32s2.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
adafruit_metro_esp32s2.menu.DFUOnBoot.dfu=Enabled
|
|
adafruit_metro_esp32s2.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
adafruit_metro_esp32s2.menu.UploadMode.cdc=Internal USB
|
|
adafruit_metro_esp32s2.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
adafruit_metro_esp32s2.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
adafruit_metro_esp32s2.menu.UploadMode.default=UART0
|
|
adafruit_metro_esp32s2.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
adafruit_metro_esp32s2.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
adafruit_metro_esp32s2.menu.PSRAM.enabled=Enabled
|
|
adafruit_metro_esp32s2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_metro_esp32s2.menu.PSRAM.disabled=Disabled
|
|
adafruit_metro_esp32s2.menu.PSRAM.disabled.build.defines=
|
|
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.tinyuf2=TinyUF2 4MB (1.3MB APP/960KB FATFS)
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-4MB
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.tinyuf2.upload.maximum_size=1441792
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.tinyuf2_noota=TinyUF2 4MB No OTA (2.7MB APP/960KB FATFS)
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-4MB-noota
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=2883584
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.default.build.partitions=default
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
adafruit_metro_esp32s2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
adafruit_metro_esp32s2.menu.CPUFreq.240=240MHz (WiFi)
|
|
adafruit_metro_esp32s2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_metro_esp32s2.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_metro_esp32s2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_metro_esp32s2.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_metro_esp32s2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_metro_esp32s2.menu.CPUFreq.40=40MHz
|
|
adafruit_metro_esp32s2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_metro_esp32s2.menu.CPUFreq.20=20MHz
|
|
adafruit_metro_esp32s2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_metro_esp32s2.menu.CPUFreq.10=10MHz
|
|
adafruit_metro_esp32s2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_metro_esp32s2.menu.FlashMode.qio=QIO
|
|
adafruit_metro_esp32s2.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_metro_esp32s2.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_metro_esp32s2.menu.FlashMode.dio=DIO
|
|
adafruit_metro_esp32s2.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_metro_esp32s2.menu.FlashMode.dio.build.boot=dio
|
|
|
|
adafruit_metro_esp32s2.menu.FlashFreq.80=80MHz
|
|
adafruit_metro_esp32s2.menu.FlashFreq.80.build.flash_freq=80m
|
|
adafruit_metro_esp32s2.menu.FlashFreq.40=40MHz
|
|
adafruit_metro_esp32s2.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
adafruit_metro_esp32s2.menu.FlashSize.4M=4MB (32Mb)
|
|
adafruit_metro_esp32s2.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
adafruit_metro_esp32s2.menu.UploadSpeed.921600=921600
|
|
adafruit_metro_esp32s2.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_metro_esp32s2.menu.UploadSpeed.115200=115200
|
|
adafruit_metro_esp32s2.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_metro_esp32s2.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_metro_esp32s2.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_metro_esp32s2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_metro_esp32s2.menu.UploadSpeed.230400=230400
|
|
adafruit_metro_esp32s2.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_metro_esp32s2.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_metro_esp32s2.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_metro_esp32s2.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_metro_esp32s2.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_metro_esp32s2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_metro_esp32s2.menu.DebugLevel.none=None
|
|
adafruit_metro_esp32s2.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_metro_esp32s2.menu.DebugLevel.error=Error
|
|
adafruit_metro_esp32s2.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_metro_esp32s2.menu.DebugLevel.warn=Warn
|
|
adafruit_metro_esp32s2.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_metro_esp32s2.menu.DebugLevel.info=Info
|
|
adafruit_metro_esp32s2.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_metro_esp32s2.menu.DebugLevel.debug=Debug
|
|
adafruit_metro_esp32s2.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_metro_esp32s2.menu.DebugLevel.verbose=Verbose
|
|
adafruit_metro_esp32s2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_metro_esp32s2.menu.EraseFlash.none=Disabled
|
|
adafruit_metro_esp32s2.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_metro_esp32s2.menu.EraseFlash.all=Enabled
|
|
adafruit_metro_esp32s2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_metro_esp32s2.menu.ZigbeeMode.default=Disabled
|
|
adafruit_metro_esp32s2.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_metro_esp32s2.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_metro_esp32s2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_metro_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_metro_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit Metro ESP32-S3
|
|
|
|
adafruit_metro_esp32s3.name=Adafruit Metro ESP32-S3
|
|
adafruit_metro_esp32s3.vid.0=0x239A
|
|
adafruit_metro_esp32s3.pid.0=0x8145
|
|
adafruit_metro_esp32s3.vid.1=0x239A
|
|
adafruit_metro_esp32s3.pid.1=0x0145
|
|
adafruit_metro_esp32s3.vid.2=0x239A
|
|
adafruit_metro_esp32s3.pid.2=0x8146
|
|
adafruit_metro_esp32s3.upload_port.0.vid=0x239A
|
|
adafruit_metro_esp32s3.upload_port.0.pid=0x8145
|
|
adafruit_metro_esp32s3.upload_port.1.vid=0x239A
|
|
adafruit_metro_esp32s3.upload_port.1.pid=0x0145
|
|
adafruit_metro_esp32s3.upload_port.2.vid=0x239A
|
|
adafruit_metro_esp32s3.upload_port.2.pid=0x8146
|
|
|
|
adafruit_metro_esp32s3.bootloader.tool=esptool_py
|
|
adafruit_metro_esp32s3.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_metro_esp32s3.upload.tool=esptool_py
|
|
adafruit_metro_esp32s3.upload.tool.default=esptool_py
|
|
adafruit_metro_esp32s3.upload.tool.network=esp_ota
|
|
|
|
adafruit_metro_esp32s3.upload.maximum_size=1310720
|
|
adafruit_metro_esp32s3.upload.maximum_data_size=327680
|
|
adafruit_metro_esp32s3.upload.flags=
|
|
adafruit_metro_esp32s3.upload.extra_flags=
|
|
adafruit_metro_esp32s3.upload.use_1200bps_touch=true
|
|
adafruit_metro_esp32s3.upload.wait_for_upload_port=true
|
|
|
|
adafruit_metro_esp32s3.serial.disableDTR=false
|
|
adafruit_metro_esp32s3.serial.disableRTS=false
|
|
|
|
adafruit_metro_esp32s3.build.tarch=xtensa
|
|
adafruit_metro_esp32s3.build.bootloader_addr=0x0
|
|
adafruit_metro_esp32s3.build.target=esp32s3
|
|
adafruit_metro_esp32s3.build.mcu=esp32s3
|
|
adafruit_metro_esp32s3.build.core=esp32
|
|
adafruit_metro_esp32s3.build.variant=adafruit_metro_esp32s3
|
|
adafruit_metro_esp32s3.build.board=METRO_ESP32S3
|
|
|
|
adafruit_metro_esp32s3.build.usb_mode=0
|
|
adafruit_metro_esp32s3.build.cdc_on_boot=1
|
|
adafruit_metro_esp32s3.build.msc_on_boot=0
|
|
adafruit_metro_esp32s3.build.dfu_on_boot=0
|
|
adafruit_metro_esp32s3.build.f_cpu=240000000L
|
|
adafruit_metro_esp32s3.build.flash_size=16MB
|
|
adafruit_metro_esp32s3.build.flash_freq=80m
|
|
adafruit_metro_esp32s3.build.flash_mode=dio
|
|
adafruit_metro_esp32s3.build.boot=qio
|
|
adafruit_metro_esp32s3.build.partitions=default
|
|
adafruit_metro_esp32s3.build.defines=
|
|
adafruit_metro_esp32s3.build.loop_core=
|
|
adafruit_metro_esp32s3.build.event_core=
|
|
adafruit_metro_esp32s3.build.flash_type=qio
|
|
adafruit_metro_esp32s3.build.psram_type=opi
|
|
adafruit_metro_esp32s3.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
adafruit_metro_esp32s3.menu.LoopCore.1=Core 1
|
|
adafruit_metro_esp32s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
adafruit_metro_esp32s3.menu.LoopCore.0=Core 0
|
|
adafruit_metro_esp32s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
adafruit_metro_esp32s3.menu.EventsCore.1=Core 1
|
|
adafruit_metro_esp32s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
adafruit_metro_esp32s3.menu.EventsCore.0=Core 0
|
|
adafruit_metro_esp32s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
adafruit_metro_esp32s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
adafruit_metro_esp32s3.menu.USBMode.default.build.usb_mode=0
|
|
adafruit_metro_esp32s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
adafruit_metro_esp32s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
|
|
adafruit_metro_esp32s3.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_metro_esp32s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_metro_esp32s3.menu.CDCOnBoot.default=Disabled
|
|
adafruit_metro_esp32s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_metro_esp32s3.menu.MSCOnBoot.default=Disabled
|
|
adafruit_metro_esp32s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
adafruit_metro_esp32s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
adafruit_metro_esp32s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
adafruit_metro_esp32s3.menu.DFUOnBoot.default=Disabled
|
|
adafruit_metro_esp32s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
adafruit_metro_esp32s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
adafruit_metro_esp32s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
adafruit_metro_esp32s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
adafruit_metro_esp32s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
adafruit_metro_esp32s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
adafruit_metro_esp32s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
adafruit_metro_esp32s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
adafruit_metro_esp32s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
adafruit_metro_esp32s3.menu.PSRAM.opi=OPI PSRAM
|
|
adafruit_metro_esp32s3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_metro_esp32s3.menu.PSRAM.opi.build.psram_type=opi
|
|
adafruit_metro_esp32s3.menu.PSRAM.disabled=Disabled
|
|
adafruit_metro_esp32s3.menu.PSRAM.disabled.build.defines=
|
|
adafruit_metro_esp32s3.menu.PSRAM.disabled.build.psram_type=opi
|
|
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.tinyuf2=TinyUF2 16MB (2MB APP/11.6MB FATFS)
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-16MB
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.tinyuf2.upload.maximum_size=2097152
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.tinyuf2_noota=TinyUF2 16MB No OTA(4MB APP/11.6MB FATFS)
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-16MB-noota
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=4194304
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.default_16MB=Default (6.25MB APP/3.43MB SPIFFS)
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.default_16MB.build.partitions=default_16MB
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.default_16MB.upload.maximum_size=6553600
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.large_spiffs=Large SPIFFS (4.5MB APP/6.93MB SPIFFS)
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.large_spiffs.build.partitions=large_spiffs_16MB
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.large_spiffs.upload.maximum_size=4718592
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9MB FATFS)
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
adafruit_metro_esp32s3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
|
|
adafruit_metro_esp32s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
adafruit_metro_esp32s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_metro_esp32s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_metro_esp32s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_metro_esp32s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_metro_esp32s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_metro_esp32s3.menu.CPUFreq.40=40MHz
|
|
adafruit_metro_esp32s3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_metro_esp32s3.menu.CPUFreq.20=20MHz
|
|
adafruit_metro_esp32s3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_metro_esp32s3.menu.CPUFreq.10=10MHz
|
|
adafruit_metro_esp32s3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_metro_esp32s3.menu.FlashMode.qio=QIO 80MHz
|
|
adafruit_metro_esp32s3.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_metro_esp32s3.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_metro_esp32s3.menu.FlashMode.qio.build.boot_freq=80m
|
|
adafruit_metro_esp32s3.menu.FlashMode.qio.build.flash_freq=80m
|
|
adafruit_metro_esp32s3.menu.FlashMode.qio120=QIO 120MHz
|
|
adafruit_metro_esp32s3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
adafruit_metro_esp32s3.menu.FlashMode.qio120.build.boot=qio
|
|
adafruit_metro_esp32s3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
adafruit_metro_esp32s3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
adafruit_metro_esp32s3.menu.FlashMode.dio=DIO 80MHz
|
|
adafruit_metro_esp32s3.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_metro_esp32s3.menu.FlashMode.dio.build.boot=dio
|
|
adafruit_metro_esp32s3.menu.FlashMode.dio.build.boot_freq=80m
|
|
adafruit_metro_esp32s3.menu.FlashMode.dio.build.flash_freq=80m
|
|
adafruit_metro_esp32s3.menu.FlashMode.opi=OPI 80MHz
|
|
adafruit_metro_esp32s3.menu.FlashMode.opi.build.flash_mode=dout
|
|
adafruit_metro_esp32s3.menu.FlashMode.opi.build.boot=opi
|
|
adafruit_metro_esp32s3.menu.FlashMode.opi.build.boot_freq=80m
|
|
adafruit_metro_esp32s3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
adafruit_metro_esp32s3.menu.FlashSize.16M=16MB (128Mb)
|
|
adafruit_metro_esp32s3.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
adafruit_metro_esp32s3.menu.UploadSpeed.921600=921600
|
|
adafruit_metro_esp32s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_metro_esp32s3.menu.UploadSpeed.115200=115200
|
|
adafruit_metro_esp32s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_metro_esp32s3.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_metro_esp32s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_metro_esp32s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_metro_esp32s3.menu.UploadSpeed.230400=230400
|
|
adafruit_metro_esp32s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_metro_esp32s3.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_metro_esp32s3.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_metro_esp32s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_metro_esp32s3.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_metro_esp32s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_metro_esp32s3.menu.DebugLevel.none=None
|
|
adafruit_metro_esp32s3.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_metro_esp32s3.menu.DebugLevel.error=Error
|
|
adafruit_metro_esp32s3.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_metro_esp32s3.menu.DebugLevel.warn=Warn
|
|
adafruit_metro_esp32s3.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_metro_esp32s3.menu.DebugLevel.info=Info
|
|
adafruit_metro_esp32s3.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_metro_esp32s3.menu.DebugLevel.debug=Debug
|
|
adafruit_metro_esp32s3.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_metro_esp32s3.menu.DebugLevel.verbose=Verbose
|
|
adafruit_metro_esp32s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_metro_esp32s3.menu.EraseFlash.none=Disabled
|
|
adafruit_metro_esp32s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_metro_esp32s3.menu.EraseFlash.all=Enabled
|
|
adafruit_metro_esp32s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_metro_esp32s3.menu.ZigbeeMode.default=Disabled
|
|
adafruit_metro_esp32s3.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_metro_esp32s3.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_metro_esp32s3.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_metro_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_metro_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit MagTag 2.9"
|
|
|
|
adafruit_magtag29_esp32s2.name=Adafruit MagTag 2.9"
|
|
adafruit_magtag29_esp32s2.vid.0=0x239A
|
|
adafruit_magtag29_esp32s2.pid.0=0x80E5
|
|
adafruit_magtag29_esp32s2.vid.1=0x239A
|
|
adafruit_magtag29_esp32s2.pid.1=0x00E5
|
|
adafruit_magtag29_esp32s2.vid.2=0x239A
|
|
adafruit_magtag29_esp32s2.pid.2=0x80E6
|
|
adafruit_magtag29_esp32s2.upload_port.0.vid=0x239A
|
|
adafruit_magtag29_esp32s2.upload_port.0.pid=0x80E5
|
|
adafruit_magtag29_esp32s2.upload_port.1.vid=0x239A
|
|
adafruit_magtag29_esp32s2.upload_port.1.pid=0x00E5
|
|
adafruit_magtag29_esp32s2.upload_port.2.vid=0x239A
|
|
adafruit_magtag29_esp32s2.upload_port.2.pid=0x80E6
|
|
|
|
adafruit_magtag29_esp32s2.bootloader.tool=esptool_py
|
|
adafruit_magtag29_esp32s2.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_magtag29_esp32s2.upload.tool=esptool_py
|
|
adafruit_magtag29_esp32s2.upload.tool.default=esptool_py
|
|
adafruit_magtag29_esp32s2.upload.tool.network=esp_ota
|
|
|
|
adafruit_magtag29_esp32s2.upload.maximum_size=1310720
|
|
adafruit_magtag29_esp32s2.upload.maximum_data_size=327680
|
|
adafruit_magtag29_esp32s2.upload.flags=
|
|
adafruit_magtag29_esp32s2.upload.extra_flags=
|
|
adafruit_magtag29_esp32s2.upload.use_1200bps_touch=true
|
|
adafruit_magtag29_esp32s2.upload.wait_for_upload_port=true
|
|
|
|
adafruit_magtag29_esp32s2.serial.disableDTR=false
|
|
adafruit_magtag29_esp32s2.serial.disableRTS=false
|
|
|
|
adafruit_magtag29_esp32s2.build.tarch=xtensa
|
|
adafruit_magtag29_esp32s2.build.bootloader_addr=0x1000
|
|
adafruit_magtag29_esp32s2.build.target=esp32s2
|
|
adafruit_magtag29_esp32s2.build.mcu=esp32s2
|
|
adafruit_magtag29_esp32s2.build.core=esp32
|
|
adafruit_magtag29_esp32s2.build.variant=adafruit_magtag29_esp32s2
|
|
adafruit_magtag29_esp32s2.build.board=MAGTAG29_ESP32S2
|
|
|
|
adafruit_magtag29_esp32s2.build.cdc_on_boot=1
|
|
adafruit_magtag29_esp32s2.build.msc_on_boot=0
|
|
adafruit_magtag29_esp32s2.build.dfu_on_boot=0
|
|
adafruit_magtag29_esp32s2.build.f_cpu=240000000L
|
|
adafruit_magtag29_esp32s2.build.flash_size=4MB
|
|
adafruit_magtag29_esp32s2.build.flash_freq=80m
|
|
adafruit_magtag29_esp32s2.build.flash_mode=dio
|
|
adafruit_magtag29_esp32s2.build.boot=qio
|
|
adafruit_magtag29_esp32s2.build.partitions=default
|
|
adafruit_magtag29_esp32s2.build.defines=
|
|
|
|
adafruit_magtag29_esp32s2.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_magtag29_esp32s2.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_magtag29_esp32s2.menu.CDCOnBoot.default=Disabled
|
|
adafruit_magtag29_esp32s2.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_magtag29_esp32s2.menu.MSCOnBoot.default=Disabled
|
|
adafruit_magtag29_esp32s2.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
adafruit_magtag29_esp32s2.menu.MSCOnBoot.msc=Enabled
|
|
adafruit_magtag29_esp32s2.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
adafruit_magtag29_esp32s2.menu.DFUOnBoot.default=Disabled
|
|
adafruit_magtag29_esp32s2.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
adafruit_magtag29_esp32s2.menu.DFUOnBoot.dfu=Enabled
|
|
adafruit_magtag29_esp32s2.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
adafruit_magtag29_esp32s2.menu.UploadMode.cdc=Internal USB
|
|
adafruit_magtag29_esp32s2.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
adafruit_magtag29_esp32s2.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
adafruit_magtag29_esp32s2.menu.UploadMode.default=UART0
|
|
adafruit_magtag29_esp32s2.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
adafruit_magtag29_esp32s2.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
adafruit_magtag29_esp32s2.menu.PSRAM.enabled=Enabled
|
|
adafruit_magtag29_esp32s2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_magtag29_esp32s2.menu.PSRAM.disabled=Disabled
|
|
adafruit_magtag29_esp32s2.menu.PSRAM.disabled.build.defines=
|
|
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.tinyuf2=TinyUF2 4MB (1.3MB APP/960KB FATFS)
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-4MB
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.tinyuf2.upload.maximum_size=1441792
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.tinyuf2_noota=TinyUF2 4MB No OTA (2.7MB APP/960KB FATFS)
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-4MB-noota
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=2883584
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.default.build.partitions=default
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
adafruit_magtag29_esp32s2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
adafruit_magtag29_esp32s2.menu.CPUFreq.240=240MHz (WiFi)
|
|
adafruit_magtag29_esp32s2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_magtag29_esp32s2.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_magtag29_esp32s2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_magtag29_esp32s2.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_magtag29_esp32s2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_magtag29_esp32s2.menu.CPUFreq.40=40MHz
|
|
adafruit_magtag29_esp32s2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_magtag29_esp32s2.menu.CPUFreq.20=20MHz
|
|
adafruit_magtag29_esp32s2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_magtag29_esp32s2.menu.CPUFreq.10=10MHz
|
|
adafruit_magtag29_esp32s2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_magtag29_esp32s2.menu.FlashMode.qio=QIO
|
|
adafruit_magtag29_esp32s2.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_magtag29_esp32s2.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_magtag29_esp32s2.menu.FlashMode.dio=DIO
|
|
adafruit_magtag29_esp32s2.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_magtag29_esp32s2.menu.FlashMode.dio.build.boot=dio
|
|
|
|
adafruit_magtag29_esp32s2.menu.FlashFreq.80=80MHz
|
|
adafruit_magtag29_esp32s2.menu.FlashFreq.80.build.flash_freq=80m
|
|
adafruit_magtag29_esp32s2.menu.FlashFreq.40=40MHz
|
|
adafruit_magtag29_esp32s2.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
adafruit_magtag29_esp32s2.menu.FlashSize.4M=4MB (32Mb)
|
|
adafruit_magtag29_esp32s2.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
adafruit_magtag29_esp32s2.menu.UploadSpeed.921600=921600
|
|
adafruit_magtag29_esp32s2.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_magtag29_esp32s2.menu.UploadSpeed.115200=115200
|
|
adafruit_magtag29_esp32s2.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_magtag29_esp32s2.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_magtag29_esp32s2.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_magtag29_esp32s2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_magtag29_esp32s2.menu.UploadSpeed.230400=230400
|
|
adafruit_magtag29_esp32s2.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_magtag29_esp32s2.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_magtag29_esp32s2.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_magtag29_esp32s2.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_magtag29_esp32s2.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_magtag29_esp32s2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_magtag29_esp32s2.menu.DebugLevel.none=None
|
|
adafruit_magtag29_esp32s2.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_magtag29_esp32s2.menu.DebugLevel.error=Error
|
|
adafruit_magtag29_esp32s2.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_magtag29_esp32s2.menu.DebugLevel.warn=Warn
|
|
adafruit_magtag29_esp32s2.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_magtag29_esp32s2.menu.DebugLevel.info=Info
|
|
adafruit_magtag29_esp32s2.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_magtag29_esp32s2.menu.DebugLevel.debug=Debug
|
|
adafruit_magtag29_esp32s2.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_magtag29_esp32s2.menu.DebugLevel.verbose=Verbose
|
|
adafruit_magtag29_esp32s2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_magtag29_esp32s2.menu.EraseFlash.none=Disabled
|
|
adafruit_magtag29_esp32s2.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_magtag29_esp32s2.menu.EraseFlash.all=Enabled
|
|
adafruit_magtag29_esp32s2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_magtag29_esp32s2.menu.ZigbeeMode.default=Disabled
|
|
adafruit_magtag29_esp32s2.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_magtag29_esp32s2.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_magtag29_esp32s2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_magtag29_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_magtag29_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit FunHouse
|
|
|
|
adafruit_funhouse_esp32s2.name=Adafruit FunHouse
|
|
adafruit_funhouse_esp32s2.vid.0=0x239A
|
|
adafruit_funhouse_esp32s2.pid.0=0x80F9
|
|
adafruit_funhouse_esp32s2.vid.1=0x239A
|
|
adafruit_funhouse_esp32s2.pid.1=0x00F9
|
|
adafruit_funhouse_esp32s2.vid.2=0x239A
|
|
adafruit_funhouse_esp32s2.pid.2=0x80FA
|
|
adafruit_funhouse_esp32s2.upload_port.0.vid=0x239A
|
|
adafruit_funhouse_esp32s2.upload_port.0.pid=0x80F9
|
|
adafruit_funhouse_esp32s2.upload_port.1.vid=0x239A
|
|
adafruit_funhouse_esp32s2.upload_port.1.pid=0x00F9
|
|
adafruit_funhouse_esp32s2.upload_port.2.vid=0x239A
|
|
adafruit_funhouse_esp32s2.upload_port.2.pid=0x80FA
|
|
|
|
adafruit_funhouse_esp32s2.bootloader.tool=esptool_py
|
|
adafruit_funhouse_esp32s2.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_funhouse_esp32s2.upload.tool=esptool_py
|
|
adafruit_funhouse_esp32s2.upload.tool.default=esptool_py
|
|
adafruit_funhouse_esp32s2.upload.tool.network=esp_ota
|
|
|
|
adafruit_funhouse_esp32s2.upload.maximum_size=1310720
|
|
adafruit_funhouse_esp32s2.upload.maximum_data_size=327680
|
|
adafruit_funhouse_esp32s2.upload.flags=
|
|
adafruit_funhouse_esp32s2.upload.extra_flags=
|
|
adafruit_funhouse_esp32s2.upload.use_1200bps_touch=true
|
|
adafruit_funhouse_esp32s2.upload.wait_for_upload_port=true
|
|
|
|
adafruit_funhouse_esp32s2.serial.disableDTR=false
|
|
adafruit_funhouse_esp32s2.serial.disableRTS=false
|
|
|
|
adafruit_funhouse_esp32s2.build.tarch=xtensa
|
|
adafruit_funhouse_esp32s2.build.bootloader_addr=0x1000
|
|
adafruit_funhouse_esp32s2.build.target=esp32s2
|
|
adafruit_funhouse_esp32s2.build.mcu=esp32s2
|
|
adafruit_funhouse_esp32s2.build.core=esp32
|
|
adafruit_funhouse_esp32s2.build.variant=adafruit_funhouse_esp32s2
|
|
adafruit_funhouse_esp32s2.build.board=FUNHOUSE_ESP32S2
|
|
|
|
adafruit_funhouse_esp32s2.build.cdc_on_boot=1
|
|
adafruit_funhouse_esp32s2.build.msc_on_boot=0
|
|
adafruit_funhouse_esp32s2.build.dfu_on_boot=0
|
|
adafruit_funhouse_esp32s2.build.f_cpu=240000000L
|
|
adafruit_funhouse_esp32s2.build.flash_size=4MB
|
|
adafruit_funhouse_esp32s2.build.flash_freq=80m
|
|
adafruit_funhouse_esp32s2.build.flash_mode=dio
|
|
adafruit_funhouse_esp32s2.build.boot=qio
|
|
adafruit_funhouse_esp32s2.build.partitions=default
|
|
adafruit_funhouse_esp32s2.build.defines=
|
|
|
|
adafruit_funhouse_esp32s2.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_funhouse_esp32s2.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_funhouse_esp32s2.menu.CDCOnBoot.default=Disabled
|
|
adafruit_funhouse_esp32s2.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_funhouse_esp32s2.menu.MSCOnBoot.default=Disabled
|
|
adafruit_funhouse_esp32s2.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
adafruit_funhouse_esp32s2.menu.MSCOnBoot.msc=Enabled
|
|
adafruit_funhouse_esp32s2.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
adafruit_funhouse_esp32s2.menu.DFUOnBoot.default=Disabled
|
|
adafruit_funhouse_esp32s2.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
adafruit_funhouse_esp32s2.menu.DFUOnBoot.dfu=Enabled
|
|
adafruit_funhouse_esp32s2.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
adafruit_funhouse_esp32s2.menu.UploadMode.cdc=Internal USB
|
|
adafruit_funhouse_esp32s2.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
adafruit_funhouse_esp32s2.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
adafruit_funhouse_esp32s2.menu.UploadMode.default=UART0
|
|
adafruit_funhouse_esp32s2.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
adafruit_funhouse_esp32s2.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
adafruit_funhouse_esp32s2.menu.PSRAM.enabled=Enabled
|
|
adafruit_funhouse_esp32s2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_funhouse_esp32s2.menu.PSRAM.disabled=Disabled
|
|
adafruit_funhouse_esp32s2.menu.PSRAM.disabled.build.defines=
|
|
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.tinyuf2=TinyUF2 4MB (1.3MB APP/960KB FATFS)
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-4MB
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.tinyuf2.upload.maximum_size=1441792
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.tinyuf2_noota=TinyUF2 4MB No OTA (2.7MB APP/960KB FATFS)
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-4MB-noota
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=2883584
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.default.build.partitions=default
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
adafruit_funhouse_esp32s2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
adafruit_funhouse_esp32s2.menu.CPUFreq.240=240MHz (WiFi)
|
|
adafruit_funhouse_esp32s2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_funhouse_esp32s2.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_funhouse_esp32s2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_funhouse_esp32s2.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_funhouse_esp32s2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_funhouse_esp32s2.menu.CPUFreq.40=40MHz
|
|
adafruit_funhouse_esp32s2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_funhouse_esp32s2.menu.CPUFreq.20=20MHz
|
|
adafruit_funhouse_esp32s2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_funhouse_esp32s2.menu.CPUFreq.10=10MHz
|
|
adafruit_funhouse_esp32s2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_funhouse_esp32s2.menu.FlashMode.qio=QIO
|
|
adafruit_funhouse_esp32s2.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_funhouse_esp32s2.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_funhouse_esp32s2.menu.FlashMode.dio=DIO
|
|
adafruit_funhouse_esp32s2.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_funhouse_esp32s2.menu.FlashMode.dio.build.boot=dio
|
|
|
|
adafruit_funhouse_esp32s2.menu.FlashFreq.80=80MHz
|
|
adafruit_funhouse_esp32s2.menu.FlashFreq.80.build.flash_freq=80m
|
|
adafruit_funhouse_esp32s2.menu.FlashFreq.40=40MHz
|
|
adafruit_funhouse_esp32s2.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
adafruit_funhouse_esp32s2.menu.FlashSize.4M=4MB (32Mb)
|
|
adafruit_funhouse_esp32s2.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
adafruit_funhouse_esp32s2.menu.UploadSpeed.921600=921600
|
|
adafruit_funhouse_esp32s2.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_funhouse_esp32s2.menu.UploadSpeed.115200=115200
|
|
adafruit_funhouse_esp32s2.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_funhouse_esp32s2.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_funhouse_esp32s2.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_funhouse_esp32s2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_funhouse_esp32s2.menu.UploadSpeed.230400=230400
|
|
adafruit_funhouse_esp32s2.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_funhouse_esp32s2.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_funhouse_esp32s2.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_funhouse_esp32s2.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_funhouse_esp32s2.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_funhouse_esp32s2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_funhouse_esp32s2.menu.DebugLevel.none=None
|
|
adafruit_funhouse_esp32s2.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_funhouse_esp32s2.menu.DebugLevel.error=Error
|
|
adafruit_funhouse_esp32s2.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_funhouse_esp32s2.menu.DebugLevel.warn=Warn
|
|
adafruit_funhouse_esp32s2.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_funhouse_esp32s2.menu.DebugLevel.info=Info
|
|
adafruit_funhouse_esp32s2.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_funhouse_esp32s2.menu.DebugLevel.debug=Debug
|
|
adafruit_funhouse_esp32s2.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_funhouse_esp32s2.menu.DebugLevel.verbose=Verbose
|
|
adafruit_funhouse_esp32s2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_funhouse_esp32s2.menu.EraseFlash.none=Disabled
|
|
adafruit_funhouse_esp32s2.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_funhouse_esp32s2.menu.EraseFlash.all=Enabled
|
|
adafruit_funhouse_esp32s2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_funhouse_esp32s2.menu.ZigbeeMode.default=Disabled
|
|
adafruit_funhouse_esp32s2.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_funhouse_esp32s2.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_funhouse_esp32s2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_funhouse_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_funhouse_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit ESP32 Feather
|
|
|
|
featheresp32.name=Adafruit ESP32 Feather
|
|
|
|
featheresp32.bootloader.tool=esptool_py
|
|
featheresp32.bootloader.tool.default=esptool_py
|
|
|
|
featheresp32.upload.tool=esptool_py
|
|
featheresp32.upload.tool.default=esptool_py
|
|
featheresp32.upload.tool.network=esp_ota
|
|
|
|
featheresp32.upload.maximum_size=1310720
|
|
featheresp32.upload.maximum_data_size=327680
|
|
featheresp32.upload.flags=
|
|
featheresp32.upload.extra_flags=
|
|
|
|
featheresp32.serial.disableDTR=true
|
|
featheresp32.serial.disableRTS=true
|
|
|
|
featheresp32.build.tarch=xtensa
|
|
featheresp32.build.bootloader_addr=0x1000
|
|
featheresp32.build.target=esp32
|
|
featheresp32.build.mcu=esp32
|
|
featheresp32.build.core=esp32
|
|
featheresp32.build.variant=feather_esp32
|
|
featheresp32.build.board=FEATHER_ESP32
|
|
|
|
featheresp32.build.f_cpu=240000000L
|
|
featheresp32.build.flash_size=4MB
|
|
featheresp32.build.flash_freq=80m
|
|
featheresp32.build.flash_mode=dio
|
|
featheresp32.build.boot=dio
|
|
featheresp32.build.partitions=default
|
|
featheresp32.build.defines=
|
|
featheresp32.build.loop_core=
|
|
featheresp32.build.event_core=
|
|
|
|
featheresp32.menu.LoopCore.1=Core 1
|
|
featheresp32.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
featheresp32.menu.LoopCore.0=Core 0
|
|
featheresp32.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
featheresp32.menu.EventsCore.1=Core 1
|
|
featheresp32.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
featheresp32.menu.EventsCore.0=Core 0
|
|
featheresp32.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
featheresp32.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
featheresp32.menu.PartitionScheme.default.build.partitions=default
|
|
featheresp32.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
featheresp32.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
featheresp32.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
featheresp32.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
featheresp32.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
featheresp32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
featheresp32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
featheresp32.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
featheresp32.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
featheresp32.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
featheresp32.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
featheresp32.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
featheresp32.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
featheresp32.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
featheresp32.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
featheresp32.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
featheresp32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
featheresp32.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
featheresp32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
featheresp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
featheresp32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
featheresp32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
featheresp32.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
featheresp32.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
featheresp32.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
featheresp32.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
featheresp32.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
featheresp32.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
featheresp32.menu.CPUFreq.40=40MHz
|
|
featheresp32.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
featheresp32.menu.CPUFreq.20=20MHz
|
|
featheresp32.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
featheresp32.menu.CPUFreq.10=10MHz
|
|
featheresp32.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
featheresp32.menu.FlashFreq.80=80MHz
|
|
featheresp32.menu.FlashFreq.80.build.flash_freq=80m
|
|
featheresp32.menu.FlashFreq.40=40MHz
|
|
featheresp32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
featheresp32.menu.FlashSize.4M=4MB (32Mb)
|
|
featheresp32.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
featheresp32.menu.UploadSpeed.921600=921600
|
|
featheresp32.menu.UploadSpeed.921600.upload.speed=921600
|
|
featheresp32.menu.UploadSpeed.115200=115200
|
|
featheresp32.menu.UploadSpeed.115200.upload.speed=115200
|
|
featheresp32.menu.UploadSpeed.256000.windows=256000
|
|
featheresp32.menu.UploadSpeed.256000.upload.speed=256000
|
|
featheresp32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
featheresp32.menu.UploadSpeed.230400=230400
|
|
featheresp32.menu.UploadSpeed.230400.upload.speed=230400
|
|
featheresp32.menu.UploadSpeed.460800.linux=460800
|
|
featheresp32.menu.UploadSpeed.460800.macosx=460800
|
|
featheresp32.menu.UploadSpeed.460800.upload.speed=460800
|
|
featheresp32.menu.UploadSpeed.512000.windows=512000
|
|
featheresp32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
featheresp32.menu.DebugLevel.none=None
|
|
featheresp32.menu.DebugLevel.none.build.code_debug=0
|
|
featheresp32.menu.DebugLevel.error=Error
|
|
featheresp32.menu.DebugLevel.error.build.code_debug=1
|
|
featheresp32.menu.DebugLevel.warn=Warn
|
|
featheresp32.menu.DebugLevel.warn.build.code_debug=2
|
|
featheresp32.menu.DebugLevel.info=Info
|
|
featheresp32.menu.DebugLevel.info.build.code_debug=3
|
|
featheresp32.menu.DebugLevel.debug=Debug
|
|
featheresp32.menu.DebugLevel.debug.build.code_debug=4
|
|
featheresp32.menu.DebugLevel.verbose=Verbose
|
|
featheresp32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
featheresp32.menu.EraseFlash.none=Disabled
|
|
featheresp32.menu.EraseFlash.none.upload.erase_cmd=
|
|
featheresp32.menu.EraseFlash.all=Enabled
|
|
featheresp32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
featheresp32.menu.ZigbeeMode.default=Disabled
|
|
featheresp32.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
featheresp32.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
featheresp32.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
featheresp32.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
featheresp32.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit Feather ESP32 V2
|
|
|
|
adafruit_feather_esp32_v2.name=Adafruit Feather ESP32 V2
|
|
|
|
adafruit_feather_esp32_v2.bootloader.tool=esptool_py
|
|
adafruit_feather_esp32_v2.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_feather_esp32_v2.upload.tool=esptool_py
|
|
adafruit_feather_esp32_v2.upload.tool.default=esptool_py
|
|
adafruit_feather_esp32_v2.upload.tool.network=esp_ota
|
|
|
|
adafruit_feather_esp32_v2.upload.maximum_size=1310720
|
|
adafruit_feather_esp32_v2.upload.maximum_data_size=327680
|
|
adafruit_feather_esp32_v2.upload.flags=
|
|
adafruit_feather_esp32_v2.upload.extra_flags=
|
|
|
|
adafruit_feather_esp32_v2.serial.disableDTR=true
|
|
adafruit_feather_esp32_v2.serial.disableRTS=true
|
|
|
|
adafruit_feather_esp32_v2.build.tarch=xtensa
|
|
adafruit_feather_esp32_v2.build.bootloader_addr=0x1000
|
|
adafruit_feather_esp32_v2.build.target=esp32
|
|
adafruit_feather_esp32_v2.build.mcu=esp32
|
|
adafruit_feather_esp32_v2.build.core=esp32
|
|
adafruit_feather_esp32_v2.build.variant=adafruit_feather_esp32_v2
|
|
adafruit_feather_esp32_v2.build.board=ADAFRUIT_FEATHER_ESP32_V2
|
|
|
|
adafruit_feather_esp32_v2.build.f_cpu=240000000L
|
|
adafruit_feather_esp32_v2.build.flash_size=8MB
|
|
adafruit_feather_esp32_v2.build.flash_freq=80m
|
|
adafruit_feather_esp32_v2.build.flash_mode=dio
|
|
adafruit_feather_esp32_v2.build.boot=dio
|
|
adafruit_feather_esp32_v2.build.partitions=default
|
|
adafruit_feather_esp32_v2.build.defines=
|
|
adafruit_feather_esp32_v2.build.loop_core=
|
|
adafruit_feather_esp32_v2.build.event_core=
|
|
|
|
adafruit_feather_esp32_v2.menu.LoopCore.1=Core 1
|
|
adafruit_feather_esp32_v2.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
adafruit_feather_esp32_v2.menu.LoopCore.0=Core 0
|
|
adafruit_feather_esp32_v2.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
adafruit_feather_esp32_v2.menu.EventsCore.1=Core 1
|
|
adafruit_feather_esp32_v2.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
adafruit_feather_esp32_v2.menu.EventsCore.0=Core 0
|
|
adafruit_feather_esp32_v2.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
adafruit_feather_esp32_v2.menu.PSRAM.enabled=Enabled
|
|
adafruit_feather_esp32_v2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
adafruit_feather_esp32_v2.menu.PSRAM.disabled=Disabled
|
|
adafruit_feather_esp32_v2.menu.PSRAM.disabled.build.defines=
|
|
|
|
adafruit_feather_esp32_v2.menu.PartitionScheme.default_8MB=Default (3MB APP/1.5MB SPIFFS)
|
|
adafruit_feather_esp32_v2.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
adafruit_feather_esp32_v2.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
|
|
adafruit_feather_esp32_v2.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
adafruit_feather_esp32_v2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_feather_esp32_v2.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
adafruit_feather_esp32_v2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_feather_esp32_v2.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
adafruit_feather_esp32_v2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_feather_esp32_v2.menu.CPUFreq.40=40MHz
|
|
adafruit_feather_esp32_v2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_feather_esp32_v2.menu.CPUFreq.20=20MHz
|
|
adafruit_feather_esp32_v2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_feather_esp32_v2.menu.CPUFreq.10=10MHz
|
|
adafruit_feather_esp32_v2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_feather_esp32_v2.menu.FlashFreq.80=80MHz
|
|
adafruit_feather_esp32_v2.menu.FlashFreq.80.build.flash_freq=80m
|
|
adafruit_feather_esp32_v2.menu.FlashFreq.40=40MHz
|
|
adafruit_feather_esp32_v2.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
adafruit_feather_esp32_v2.menu.FlashSize.8M=8MB (64Mb)
|
|
adafruit_feather_esp32_v2.menu.FlashSize.8M.build.flash_size=8MB
|
|
|
|
adafruit_feather_esp32_v2.menu.UploadSpeed.921600=921600
|
|
adafruit_feather_esp32_v2.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_feather_esp32_v2.menu.UploadSpeed.115200=115200
|
|
adafruit_feather_esp32_v2.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_feather_esp32_v2.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_feather_esp32_v2.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_feather_esp32_v2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_feather_esp32_v2.menu.UploadSpeed.230400=230400
|
|
adafruit_feather_esp32_v2.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_feather_esp32_v2.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_feather_esp32_v2.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_feather_esp32_v2.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_feather_esp32_v2.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_feather_esp32_v2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_feather_esp32_v2.menu.DebugLevel.none=None
|
|
adafruit_feather_esp32_v2.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_feather_esp32_v2.menu.DebugLevel.error=Error
|
|
adafruit_feather_esp32_v2.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_feather_esp32_v2.menu.DebugLevel.warn=Warn
|
|
adafruit_feather_esp32_v2.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_feather_esp32_v2.menu.DebugLevel.info=Info
|
|
adafruit_feather_esp32_v2.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_feather_esp32_v2.menu.DebugLevel.debug=Debug
|
|
adafruit_feather_esp32_v2.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_feather_esp32_v2.menu.DebugLevel.verbose=Verbose
|
|
adafruit_feather_esp32_v2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_feather_esp32_v2.menu.EraseFlash.none=Disabled
|
|
adafruit_feather_esp32_v2.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_feather_esp32_v2.menu.EraseFlash.all=Enabled
|
|
adafruit_feather_esp32_v2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_feather_esp32_v2.menu.ZigbeeMode.default=Disabled
|
|
adafruit_feather_esp32_v2.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_feather_esp32_v2.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_feather_esp32_v2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_feather_esp32_v2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_feather_esp32_v2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit Feather ESP32-S2
|
|
|
|
adafruit_feather_esp32s2.name=Adafruit Feather ESP32-S2
|
|
adafruit_feather_esp32s2.vid.0=0x239A
|
|
adafruit_feather_esp32s2.pid.0=0x80EB
|
|
adafruit_feather_esp32s2.vid.1=0x239A
|
|
adafruit_feather_esp32s2.pid.1=0x00EB
|
|
adafruit_feather_esp32s2.vid.2=0x239A
|
|
adafruit_feather_esp32s2.pid.2=0x80EC
|
|
adafruit_feather_esp32s2.upload_port.0.vid=0x239A
|
|
adafruit_feather_esp32s2.upload_port.0.pid=0x80EB
|
|
adafruit_feather_esp32s2.upload_port.1.vid=0x239A
|
|
adafruit_feather_esp32s2.upload_port.1.pid=0x00EB
|
|
adafruit_feather_esp32s2.upload_port.2.vid=0x239A
|
|
adafruit_feather_esp32s2.upload_port.2.pid=0x80EC
|
|
|
|
adafruit_feather_esp32s2.bootloader.tool=esptool_py
|
|
adafruit_feather_esp32s2.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_feather_esp32s2.upload.tool=esptool_py
|
|
adafruit_feather_esp32s2.upload.tool.default=esptool_py
|
|
adafruit_feather_esp32s2.upload.tool.network=esp_ota
|
|
|
|
adafruit_feather_esp32s2.upload.maximum_size=1310720
|
|
adafruit_feather_esp32s2.upload.maximum_data_size=327680
|
|
adafruit_feather_esp32s2.upload.flags=
|
|
adafruit_feather_esp32s2.upload.extra_flags=
|
|
adafruit_feather_esp32s2.upload.use_1200bps_touch=true
|
|
adafruit_feather_esp32s2.upload.wait_for_upload_port=true
|
|
|
|
adafruit_feather_esp32s2.serial.disableDTR=false
|
|
adafruit_feather_esp32s2.serial.disableRTS=false
|
|
|
|
adafruit_feather_esp32s2.build.tarch=xtensa
|
|
adafruit_feather_esp32s2.build.bootloader_addr=0x1000
|
|
adafruit_feather_esp32s2.build.target=esp32s2
|
|
adafruit_feather_esp32s2.build.mcu=esp32s2
|
|
adafruit_feather_esp32s2.build.core=esp32
|
|
adafruit_feather_esp32s2.build.variant=adafruit_feather_esp32s2
|
|
adafruit_feather_esp32s2.build.board=ADAFRUIT_FEATHER_ESP32S2
|
|
|
|
adafruit_feather_esp32s2.build.cdc_on_boot=1
|
|
adafruit_feather_esp32s2.build.msc_on_boot=0
|
|
adafruit_feather_esp32s2.build.dfu_on_boot=0
|
|
adafruit_feather_esp32s2.build.f_cpu=240000000L
|
|
adafruit_feather_esp32s2.build.flash_size=4MB
|
|
adafruit_feather_esp32s2.build.flash_freq=80m
|
|
adafruit_feather_esp32s2.build.flash_mode=dio
|
|
adafruit_feather_esp32s2.build.boot=qio
|
|
adafruit_feather_esp32s2.build.partitions=default
|
|
adafruit_feather_esp32s2.build.defines=
|
|
|
|
adafruit_feather_esp32s2.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_feather_esp32s2.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_feather_esp32s2.menu.CDCOnBoot.default=Disabled
|
|
adafruit_feather_esp32s2.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_feather_esp32s2.menu.MSCOnBoot.default=Disabled
|
|
adafruit_feather_esp32s2.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
adafruit_feather_esp32s2.menu.MSCOnBoot.msc=Enabled
|
|
adafruit_feather_esp32s2.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
adafruit_feather_esp32s2.menu.DFUOnBoot.default=Disabled
|
|
adafruit_feather_esp32s2.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
adafruit_feather_esp32s2.menu.DFUOnBoot.dfu=Enabled
|
|
adafruit_feather_esp32s2.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
adafruit_feather_esp32s2.menu.UploadMode.cdc=Internal USB
|
|
adafruit_feather_esp32s2.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
adafruit_feather_esp32s2.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
adafruit_feather_esp32s2.menu.UploadMode.default=UART0
|
|
adafruit_feather_esp32s2.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
adafruit_feather_esp32s2.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
adafruit_feather_esp32s2.menu.PSRAM.enabled=Enabled
|
|
adafruit_feather_esp32s2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_feather_esp32s2.menu.PSRAM.disabled=Disabled
|
|
adafruit_feather_esp32s2.menu.PSRAM.disabled.build.defines=
|
|
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.tinyuf2=TinyUF2 4MB (1.3MB APP/960KB FATFS)
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-4MB
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.tinyuf2.upload.maximum_size=1441792
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.tinyuf2_noota=TinyUF2 4MB No OTA (2.7MB APP/960KB FATFS)
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-4MB-noota
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=2883584
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.default.build.partitions=default
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
adafruit_feather_esp32s2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
adafruit_feather_esp32s2.menu.CPUFreq.240=240MHz (WiFi)
|
|
adafruit_feather_esp32s2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_feather_esp32s2.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_feather_esp32s2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_feather_esp32s2.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_feather_esp32s2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_feather_esp32s2.menu.CPUFreq.40=40MHz
|
|
adafruit_feather_esp32s2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_feather_esp32s2.menu.CPUFreq.20=20MHz
|
|
adafruit_feather_esp32s2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_feather_esp32s2.menu.CPUFreq.10=10MHz
|
|
adafruit_feather_esp32s2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_feather_esp32s2.menu.FlashMode.qio=QIO
|
|
adafruit_feather_esp32s2.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_feather_esp32s2.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_feather_esp32s2.menu.FlashMode.dio=DIO
|
|
adafruit_feather_esp32s2.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_feather_esp32s2.menu.FlashMode.dio.build.boot=dio
|
|
|
|
adafruit_feather_esp32s2.menu.FlashFreq.80=80MHz
|
|
adafruit_feather_esp32s2.menu.FlashFreq.80.build.flash_freq=80m
|
|
adafruit_feather_esp32s2.menu.FlashFreq.40=40MHz
|
|
adafruit_feather_esp32s2.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
adafruit_feather_esp32s2.menu.FlashSize.4M=4MB (32Mb)
|
|
adafruit_feather_esp32s2.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
adafruit_feather_esp32s2.menu.UploadSpeed.921600=921600
|
|
adafruit_feather_esp32s2.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_feather_esp32s2.menu.UploadSpeed.115200=115200
|
|
adafruit_feather_esp32s2.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_feather_esp32s2.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_feather_esp32s2.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_feather_esp32s2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_feather_esp32s2.menu.UploadSpeed.230400=230400
|
|
adafruit_feather_esp32s2.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_feather_esp32s2.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_feather_esp32s2.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_feather_esp32s2.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_feather_esp32s2.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_feather_esp32s2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_feather_esp32s2.menu.DebugLevel.none=None
|
|
adafruit_feather_esp32s2.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_feather_esp32s2.menu.DebugLevel.error=Error
|
|
adafruit_feather_esp32s2.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_feather_esp32s2.menu.DebugLevel.warn=Warn
|
|
adafruit_feather_esp32s2.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_feather_esp32s2.menu.DebugLevel.info=Info
|
|
adafruit_feather_esp32s2.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_feather_esp32s2.menu.DebugLevel.debug=Debug
|
|
adafruit_feather_esp32s2.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_feather_esp32s2.menu.DebugLevel.verbose=Verbose
|
|
adafruit_feather_esp32s2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_feather_esp32s2.menu.EraseFlash.none=Disabled
|
|
adafruit_feather_esp32s2.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_feather_esp32s2.menu.EraseFlash.all=Enabled
|
|
adafruit_feather_esp32s2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_feather_esp32s2.menu.ZigbeeMode.default=Disabled
|
|
adafruit_feather_esp32s2.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_feather_esp32s2.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_feather_esp32s2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_feather_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_feather_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit Feather ESP32-S2 TFT
|
|
|
|
adafruit_feather_esp32s2_tft.name=Adafruit Feather ESP32-S2 TFT
|
|
adafruit_feather_esp32s2_tft.vid.0=0x239A
|
|
adafruit_feather_esp32s2_tft.pid.0=0x810F
|
|
adafruit_feather_esp32s2_tft.vid.1=0x239A
|
|
adafruit_feather_esp32s2_tft.pid.1=0x010F
|
|
adafruit_feather_esp32s2_tft.vid.2=0x239A
|
|
adafruit_feather_esp32s2_tft.pid.2=0x8110
|
|
adafruit_feather_esp32s2_tft.upload_port.0.vid=0x239A
|
|
adafruit_feather_esp32s2_tft.upload_port.0.pid=0x810F
|
|
adafruit_feather_esp32s2_tft.upload_port.1.vid=0x239A
|
|
adafruit_feather_esp32s2_tft.upload_port.1.pid=0x010F
|
|
adafruit_feather_esp32s2_tft.upload_port.2.vid=0x239A
|
|
adafruit_feather_esp32s2_tft.upload_port.2.pid=0x8110
|
|
|
|
adafruit_feather_esp32s2_tft.bootloader.tool=esptool_py
|
|
adafruit_feather_esp32s2_tft.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_feather_esp32s2_tft.upload.tool=esptool_py
|
|
adafruit_feather_esp32s2_tft.upload.tool.default=esptool_py
|
|
adafruit_feather_esp32s2_tft.upload.tool.network=esp_ota
|
|
|
|
adafruit_feather_esp32s2_tft.upload.maximum_size=1310720
|
|
adafruit_feather_esp32s2_tft.upload.maximum_data_size=327680
|
|
adafruit_feather_esp32s2_tft.upload.flags=
|
|
adafruit_feather_esp32s2_tft.upload.extra_flags=
|
|
adafruit_feather_esp32s2_tft.upload.use_1200bps_touch=true
|
|
adafruit_feather_esp32s2_tft.upload.wait_for_upload_port=true
|
|
|
|
adafruit_feather_esp32s2_tft.serial.disableDTR=false
|
|
adafruit_feather_esp32s2_tft.serial.disableRTS=false
|
|
|
|
adafruit_feather_esp32s2_tft.build.tarch=xtensa
|
|
adafruit_feather_esp32s2_tft.build.bootloader_addr=0x1000
|
|
adafruit_feather_esp32s2_tft.build.target=esp32s2
|
|
adafruit_feather_esp32s2_tft.build.mcu=esp32s2
|
|
adafruit_feather_esp32s2_tft.build.core=esp32
|
|
adafruit_feather_esp32s2_tft.build.variant=adafruit_feather_esp32s2_tft
|
|
adafruit_feather_esp32s2_tft.build.board=ADAFRUIT_FEATHER_ESP32S2_TFT
|
|
|
|
adafruit_feather_esp32s2_tft.build.cdc_on_boot=1
|
|
adafruit_feather_esp32s2_tft.build.msc_on_boot=0
|
|
adafruit_feather_esp32s2_tft.build.dfu_on_boot=0
|
|
adafruit_feather_esp32s2_tft.build.f_cpu=240000000L
|
|
adafruit_feather_esp32s2_tft.build.flash_size=4MB
|
|
adafruit_feather_esp32s2_tft.build.flash_freq=80m
|
|
adafruit_feather_esp32s2_tft.build.flash_mode=dio
|
|
adafruit_feather_esp32s2_tft.build.boot=qio
|
|
adafruit_feather_esp32s2_tft.build.partitions=default
|
|
adafruit_feather_esp32s2_tft.build.defines=
|
|
|
|
adafruit_feather_esp32s2_tft.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_feather_esp32s2_tft.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_feather_esp32s2_tft.menu.CDCOnBoot.default=Disabled
|
|
adafruit_feather_esp32s2_tft.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_feather_esp32s2_tft.menu.MSCOnBoot.default=Disabled
|
|
adafruit_feather_esp32s2_tft.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
adafruit_feather_esp32s2_tft.menu.MSCOnBoot.msc=Enabled
|
|
adafruit_feather_esp32s2_tft.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
adafruit_feather_esp32s2_tft.menu.DFUOnBoot.default=Disabled
|
|
adafruit_feather_esp32s2_tft.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
adafruit_feather_esp32s2_tft.menu.DFUOnBoot.dfu=Enabled
|
|
adafruit_feather_esp32s2_tft.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
adafruit_feather_esp32s2_tft.menu.UploadMode.cdc=Internal USB
|
|
adafruit_feather_esp32s2_tft.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
adafruit_feather_esp32s2_tft.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
adafruit_feather_esp32s2_tft.menu.UploadMode.default=UART0
|
|
adafruit_feather_esp32s2_tft.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
adafruit_feather_esp32s2_tft.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
adafruit_feather_esp32s2_tft.menu.PSRAM.enabled=Enabled
|
|
adafruit_feather_esp32s2_tft.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_feather_esp32s2_tft.menu.PSRAM.disabled=Disabled
|
|
adafruit_feather_esp32s2_tft.menu.PSRAM.disabled.build.defines=
|
|
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.tinyuf2=TinyUF2 4MB (1.3MB APP/960KB FATFS)
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-4MB
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.tinyuf2.upload.maximum_size=1441792
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.tinyuf2_noota=TinyUF2 4MB No OTA (2.7MB APP/960KB FATFS)
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-4MB-noota
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=2883584
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.default.build.partitions=default
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
adafruit_feather_esp32s2_tft.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
adafruit_feather_esp32s2_tft.menu.CPUFreq.240=240MHz (WiFi)
|
|
adafruit_feather_esp32s2_tft.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_feather_esp32s2_tft.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_feather_esp32s2_tft.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_feather_esp32s2_tft.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_feather_esp32s2_tft.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_feather_esp32s2_tft.menu.CPUFreq.40=40MHz
|
|
adafruit_feather_esp32s2_tft.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_feather_esp32s2_tft.menu.CPUFreq.20=20MHz
|
|
adafruit_feather_esp32s2_tft.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_feather_esp32s2_tft.menu.CPUFreq.10=10MHz
|
|
adafruit_feather_esp32s2_tft.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_feather_esp32s2_tft.menu.FlashMode.qio=QIO
|
|
adafruit_feather_esp32s2_tft.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_feather_esp32s2_tft.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_feather_esp32s2_tft.menu.FlashMode.dio=DIO
|
|
adafruit_feather_esp32s2_tft.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_feather_esp32s2_tft.menu.FlashMode.dio.build.boot=dio
|
|
|
|
adafruit_feather_esp32s2_tft.menu.FlashFreq.80=80MHz
|
|
adafruit_feather_esp32s2_tft.menu.FlashFreq.80.build.flash_freq=80m
|
|
adafruit_feather_esp32s2_tft.menu.FlashFreq.40=40MHz
|
|
adafruit_feather_esp32s2_tft.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
adafruit_feather_esp32s2_tft.menu.FlashSize.4M=4MB (32Mb)
|
|
adafruit_feather_esp32s2_tft.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
adafruit_feather_esp32s2_tft.menu.UploadSpeed.921600=921600
|
|
adafruit_feather_esp32s2_tft.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_feather_esp32s2_tft.menu.UploadSpeed.115200=115200
|
|
adafruit_feather_esp32s2_tft.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_feather_esp32s2_tft.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_feather_esp32s2_tft.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_feather_esp32s2_tft.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_feather_esp32s2_tft.menu.UploadSpeed.230400=230400
|
|
adafruit_feather_esp32s2_tft.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_feather_esp32s2_tft.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_feather_esp32s2_tft.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_feather_esp32s2_tft.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_feather_esp32s2_tft.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_feather_esp32s2_tft.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_feather_esp32s2_tft.menu.DebugLevel.none=None
|
|
adafruit_feather_esp32s2_tft.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_feather_esp32s2_tft.menu.DebugLevel.error=Error
|
|
adafruit_feather_esp32s2_tft.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_feather_esp32s2_tft.menu.DebugLevel.warn=Warn
|
|
adafruit_feather_esp32s2_tft.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_feather_esp32s2_tft.menu.DebugLevel.info=Info
|
|
adafruit_feather_esp32s2_tft.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_feather_esp32s2_tft.menu.DebugLevel.debug=Debug
|
|
adafruit_feather_esp32s2_tft.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_feather_esp32s2_tft.menu.DebugLevel.verbose=Verbose
|
|
adafruit_feather_esp32s2_tft.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_feather_esp32s2_tft.menu.EraseFlash.none=Disabled
|
|
adafruit_feather_esp32s2_tft.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_feather_esp32s2_tft.menu.EraseFlash.all=Enabled
|
|
adafruit_feather_esp32s2_tft.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_feather_esp32s2_tft.menu.ZigbeeMode.default=Disabled
|
|
adafruit_feather_esp32s2_tft.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_feather_esp32s2_tft.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_feather_esp32s2_tft.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_feather_esp32s2_tft.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_feather_esp32s2_tft.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit Feather ESP32-S2 Reverse TFT
|
|
|
|
adafruit_feather_esp32s2_reversetft.name=Adafruit Feather ESP32-S2 Reverse TFT
|
|
adafruit_feather_esp32s2_reversetft.vid.0=0x239A
|
|
adafruit_feather_esp32s2_reversetft.pid.0=0x80ED
|
|
adafruit_feather_esp32s2_reversetft.vid.1=0x239A
|
|
adafruit_feather_esp32s2_reversetft.pid.1=0x00ED
|
|
adafruit_feather_esp32s2_reversetft.vid.2=0x239A
|
|
adafruit_feather_esp32s2_reversetft.pid.2=0x80EE
|
|
adafruit_feather_esp32s2_reversetft.upload_port.0.vid=0x239A
|
|
adafruit_feather_esp32s2_reversetft.upload_port.0.pid=0x80ED
|
|
adafruit_feather_esp32s2_reversetft.upload_port.1.vid=0x239A
|
|
adafruit_feather_esp32s2_reversetft.upload_port.1.pid=0x00ED
|
|
adafruit_feather_esp32s2_reversetft.upload_port.2.vid=0x239A
|
|
adafruit_feather_esp32s2_reversetft.upload_port.2.pid=0x80EE
|
|
|
|
adafruit_feather_esp32s2_reversetft.bootloader.tool=esptool_py
|
|
adafruit_feather_esp32s2_reversetft.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_feather_esp32s2_reversetft.upload.tool=esptool_py
|
|
adafruit_feather_esp32s2_reversetft.upload.tool.default=esptool_py
|
|
adafruit_feather_esp32s2_reversetft.upload.tool.network=esp_ota
|
|
|
|
adafruit_feather_esp32s2_reversetft.upload.maximum_size=1310720
|
|
adafruit_feather_esp32s2_reversetft.upload.maximum_data_size=327680
|
|
adafruit_feather_esp32s2_reversetft.upload.flags=
|
|
adafruit_feather_esp32s2_reversetft.upload.extra_flags=
|
|
adafruit_feather_esp32s2_reversetft.upload.use_1200bps_touch=true
|
|
adafruit_feather_esp32s2_reversetft.upload.wait_for_upload_port=true
|
|
|
|
adafruit_feather_esp32s2_reversetft.serial.disableDTR=false
|
|
adafruit_feather_esp32s2_reversetft.serial.disableRTS=false
|
|
|
|
adafruit_feather_esp32s2_reversetft.build.tarch=xtensa
|
|
adafruit_feather_esp32s2_reversetft.build.bootloader_addr=0x1000
|
|
adafruit_feather_esp32s2_reversetft.build.target=esp32s2
|
|
adafruit_feather_esp32s2_reversetft.build.mcu=esp32s2
|
|
adafruit_feather_esp32s2_reversetft.build.core=esp32
|
|
adafruit_feather_esp32s2_reversetft.build.variant=adafruit_feather_esp32s2_reversetft
|
|
adafruit_feather_esp32s2_reversetft.build.board=ADAFRUIT_FEATHER_ESP32S2_REVTFT
|
|
|
|
adafruit_feather_esp32s2_reversetft.build.cdc_on_boot=1
|
|
adafruit_feather_esp32s2_reversetft.build.msc_on_boot=0
|
|
adafruit_feather_esp32s2_reversetft.build.dfu_on_boot=0
|
|
adafruit_feather_esp32s2_reversetft.build.f_cpu=240000000L
|
|
adafruit_feather_esp32s2_reversetft.build.flash_size=4MB
|
|
adafruit_feather_esp32s2_reversetft.build.flash_freq=80m
|
|
adafruit_feather_esp32s2_reversetft.build.flash_mode=dio
|
|
adafruit_feather_esp32s2_reversetft.build.boot=qio
|
|
adafruit_feather_esp32s2_reversetft.build.partitions=default
|
|
adafruit_feather_esp32s2_reversetft.build.defines=
|
|
|
|
adafruit_feather_esp32s2_reversetft.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_feather_esp32s2_reversetft.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_feather_esp32s2_reversetft.menu.CDCOnBoot.default=Disabled
|
|
adafruit_feather_esp32s2_reversetft.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_feather_esp32s2_reversetft.menu.MSCOnBoot.default=Disabled
|
|
adafruit_feather_esp32s2_reversetft.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
adafruit_feather_esp32s2_reversetft.menu.MSCOnBoot.msc=Enabled
|
|
adafruit_feather_esp32s2_reversetft.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
adafruit_feather_esp32s2_reversetft.menu.DFUOnBoot.default=Disabled
|
|
adafruit_feather_esp32s2_reversetft.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
adafruit_feather_esp32s2_reversetft.menu.DFUOnBoot.dfu=Enabled
|
|
adafruit_feather_esp32s2_reversetft.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadMode.cdc=Internal USB
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadMode.default=UART0
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
adafruit_feather_esp32s2_reversetft.menu.PSRAM.enabled=Enabled
|
|
adafruit_feather_esp32s2_reversetft.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_feather_esp32s2_reversetft.menu.PSRAM.disabled=Disabled
|
|
adafruit_feather_esp32s2_reversetft.menu.PSRAM.disabled.build.defines=
|
|
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.tinyuf2=TinyUF2 4MB (1.3MB APP/960KB FATFS)
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-4MB
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.tinyuf2.upload.maximum_size=1441792
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.tinyuf2_noota=TinyUF2 4MB No OTA (2.7MB APP/960KB FATFS)
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-4MB-noota
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=2883584
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.default.build.partitions=default
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
adafruit_feather_esp32s2_reversetft.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
adafruit_feather_esp32s2_reversetft.menu.CPUFreq.240=240MHz (WiFi)
|
|
adafruit_feather_esp32s2_reversetft.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_feather_esp32s2_reversetft.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_feather_esp32s2_reversetft.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_feather_esp32s2_reversetft.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_feather_esp32s2_reversetft.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_feather_esp32s2_reversetft.menu.CPUFreq.40=40MHz
|
|
adafruit_feather_esp32s2_reversetft.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_feather_esp32s2_reversetft.menu.CPUFreq.20=20MHz
|
|
adafruit_feather_esp32s2_reversetft.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_feather_esp32s2_reversetft.menu.CPUFreq.10=10MHz
|
|
adafruit_feather_esp32s2_reversetft.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_feather_esp32s2_reversetft.menu.FlashMode.qio=QIO
|
|
adafruit_feather_esp32s2_reversetft.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_feather_esp32s2_reversetft.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_feather_esp32s2_reversetft.menu.FlashMode.dio=DIO
|
|
adafruit_feather_esp32s2_reversetft.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_feather_esp32s2_reversetft.menu.FlashMode.dio.build.boot=dio
|
|
|
|
adafruit_feather_esp32s2_reversetft.menu.FlashFreq.80=80MHz
|
|
adafruit_feather_esp32s2_reversetft.menu.FlashFreq.80.build.flash_freq=80m
|
|
adafruit_feather_esp32s2_reversetft.menu.FlashFreq.40=40MHz
|
|
adafruit_feather_esp32s2_reversetft.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
adafruit_feather_esp32s2_reversetft.menu.FlashSize.4M=4MB (32Mb)
|
|
adafruit_feather_esp32s2_reversetft.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadSpeed.921600=921600
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadSpeed.115200=115200
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadSpeed.230400=230400
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_feather_esp32s2_reversetft.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_feather_esp32s2_reversetft.menu.DebugLevel.none=None
|
|
adafruit_feather_esp32s2_reversetft.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_feather_esp32s2_reversetft.menu.DebugLevel.error=Error
|
|
adafruit_feather_esp32s2_reversetft.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_feather_esp32s2_reversetft.menu.DebugLevel.warn=Warn
|
|
adafruit_feather_esp32s2_reversetft.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_feather_esp32s2_reversetft.menu.DebugLevel.info=Info
|
|
adafruit_feather_esp32s2_reversetft.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_feather_esp32s2_reversetft.menu.DebugLevel.debug=Debug
|
|
adafruit_feather_esp32s2_reversetft.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_feather_esp32s2_reversetft.menu.DebugLevel.verbose=Verbose
|
|
adafruit_feather_esp32s2_reversetft.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_feather_esp32s2_reversetft.menu.EraseFlash.none=Disabled
|
|
adafruit_feather_esp32s2_reversetft.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_feather_esp32s2_reversetft.menu.EraseFlash.all=Enabled
|
|
adafruit_feather_esp32s2_reversetft.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_feather_esp32s2_reversetft.menu.ZigbeeMode.default=Disabled
|
|
adafruit_feather_esp32s2_reversetft.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_feather_esp32s2_reversetft.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_feather_esp32s2_reversetft.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_feather_esp32s2_reversetft.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_feather_esp32s2_reversetft.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit Feather ESP32-S3 2MB PSRAM
|
|
|
|
adafruit_feather_esp32s3.name=Adafruit Feather ESP32-S3 2MB PSRAM
|
|
adafruit_feather_esp32s3.vid.0=0x239A
|
|
adafruit_feather_esp32s3.pid.0=0x811B
|
|
adafruit_feather_esp32s3.vid.1=0x239A
|
|
adafruit_feather_esp32s3.pid.1=0x011B
|
|
adafruit_feather_esp32s3.vid.2=0x239A
|
|
adafruit_feather_esp32s3.pid.2=0x811C
|
|
adafruit_feather_esp32s3.upload_port.0.vid=0x239A
|
|
adafruit_feather_esp32s3.upload_port.0.pid=0x811B
|
|
adafruit_feather_esp32s3.upload_port.1.vid=0x239A
|
|
adafruit_feather_esp32s3.upload_port.1.pid=0x011B
|
|
adafruit_feather_esp32s3.upload_port.2.vid=0x239A
|
|
adafruit_feather_esp32s3.upload_port.2.pid=0x811C
|
|
|
|
adafruit_feather_esp32s3.bootloader.tool=esptool_py
|
|
adafruit_feather_esp32s3.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_feather_esp32s3.upload.tool=esptool_py
|
|
adafruit_feather_esp32s3.upload.tool.default=esptool_py
|
|
adafruit_feather_esp32s3.upload.tool.network=esp_ota
|
|
|
|
adafruit_feather_esp32s3.upload.maximum_size=1310720
|
|
adafruit_feather_esp32s3.upload.maximum_data_size=327680
|
|
adafruit_feather_esp32s3.upload.flags=
|
|
adafruit_feather_esp32s3.upload.extra_flags=
|
|
adafruit_feather_esp32s3.upload.use_1200bps_touch=true
|
|
adafruit_feather_esp32s3.upload.wait_for_upload_port=true
|
|
|
|
adafruit_feather_esp32s3.serial.disableDTR=false
|
|
adafruit_feather_esp32s3.serial.disableRTS=false
|
|
|
|
adafruit_feather_esp32s3.build.tarch=xtensa
|
|
adafruit_feather_esp32s3.build.bootloader_addr=0x0
|
|
adafruit_feather_esp32s3.build.target=esp32s3
|
|
adafruit_feather_esp32s3.build.mcu=esp32s3
|
|
adafruit_feather_esp32s3.build.core=esp32
|
|
adafruit_feather_esp32s3.build.variant=adafruit_feather_esp32s3
|
|
adafruit_feather_esp32s3.build.board=ADAFRUIT_FEATHER_ESP32S3
|
|
|
|
adafruit_feather_esp32s3.build.usb_mode=0
|
|
adafruit_feather_esp32s3.build.cdc_on_boot=1
|
|
adafruit_feather_esp32s3.build.msc_on_boot=0
|
|
adafruit_feather_esp32s3.build.dfu_on_boot=0
|
|
adafruit_feather_esp32s3.build.f_cpu=240000000L
|
|
adafruit_feather_esp32s3.build.flash_size=4MB
|
|
adafruit_feather_esp32s3.build.flash_freq=80m
|
|
adafruit_feather_esp32s3.build.flash_mode=dio
|
|
adafruit_feather_esp32s3.build.boot=qio
|
|
adafruit_feather_esp32s3.build.partitions=default
|
|
adafruit_feather_esp32s3.build.defines=
|
|
adafruit_feather_esp32s3.build.loop_core=
|
|
adafruit_feather_esp32s3.build.event_core=
|
|
adafruit_feather_esp32s3.build.flash_type=qio
|
|
adafruit_feather_esp32s3.build.psram_type=qspi
|
|
adafruit_feather_esp32s3.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
adafruit_feather_esp32s3.menu.LoopCore.1=Core 1
|
|
adafruit_feather_esp32s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
adafruit_feather_esp32s3.menu.LoopCore.0=Core 0
|
|
adafruit_feather_esp32s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
adafruit_feather_esp32s3.menu.EventsCore.1=Core 1
|
|
adafruit_feather_esp32s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
adafruit_feather_esp32s3.menu.EventsCore.0=Core 0
|
|
adafruit_feather_esp32s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
adafruit_feather_esp32s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
adafruit_feather_esp32s3.menu.USBMode.default.build.usb_mode=0
|
|
adafruit_feather_esp32s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
adafruit_feather_esp32s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
|
|
adafruit_feather_esp32s3.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_feather_esp32s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_feather_esp32s3.menu.CDCOnBoot.default=Disabled
|
|
adafruit_feather_esp32s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_feather_esp32s3.menu.MSCOnBoot.default=Disabled
|
|
adafruit_feather_esp32s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
adafruit_feather_esp32s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
adafruit_feather_esp32s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
adafruit_feather_esp32s3.menu.DFUOnBoot.default=Disabled
|
|
adafruit_feather_esp32s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
adafruit_feather_esp32s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
adafruit_feather_esp32s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
adafruit_feather_esp32s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
adafruit_feather_esp32s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
adafruit_feather_esp32s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
adafruit_feather_esp32s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
adafruit_feather_esp32s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
adafruit_feather_esp32s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
adafruit_feather_esp32s3.menu.PSRAM.enabled=QSPI PSRAM
|
|
adafruit_feather_esp32s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_feather_esp32s3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
adafruit_feather_esp32s3.menu.PSRAM.disabled=Disabled
|
|
adafruit_feather_esp32s3.menu.PSRAM.disabled.build.defines=
|
|
adafruit_feather_esp32s3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
adafruit_feather_esp32s3.menu.PSRAM.opi=OPI PSRAM
|
|
adafruit_feather_esp32s3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_feather_esp32s3.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.tinyuf2=TinyUF2 4MB (1.3MB APP/960KB FATFS)
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-4MB
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.tinyuf2.upload.maximum_size=1441792
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.tinyuf2_noota=TinyUF2 4MB No OTA (2.7MB APP/960KB FATFS)
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-4MB-noota
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=2883584
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.default.build.partitions=default
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
adafruit_feather_esp32s3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
adafruit_feather_esp32s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
adafruit_feather_esp32s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_feather_esp32s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_feather_esp32s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_feather_esp32s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_feather_esp32s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_feather_esp32s3.menu.CPUFreq.40=40MHz
|
|
adafruit_feather_esp32s3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_feather_esp32s3.menu.CPUFreq.20=20MHz
|
|
adafruit_feather_esp32s3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_feather_esp32s3.menu.CPUFreq.10=10MHz
|
|
adafruit_feather_esp32s3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_feather_esp32s3.menu.FlashMode.qio=QIO 80MHz
|
|
adafruit_feather_esp32s3.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_feather_esp32s3.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_feather_esp32s3.menu.FlashMode.qio.build.boot_freq=80m
|
|
adafruit_feather_esp32s3.menu.FlashMode.qio.build.flash_freq=80m
|
|
adafruit_feather_esp32s3.menu.FlashMode.qio120=QIO 120MHz
|
|
adafruit_feather_esp32s3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
adafruit_feather_esp32s3.menu.FlashMode.qio120.build.boot=qio
|
|
adafruit_feather_esp32s3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
adafruit_feather_esp32s3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
adafruit_feather_esp32s3.menu.FlashMode.dio=DIO 80MHz
|
|
adafruit_feather_esp32s3.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_feather_esp32s3.menu.FlashMode.dio.build.boot=dio
|
|
adafruit_feather_esp32s3.menu.FlashMode.dio.build.boot_freq=80m
|
|
adafruit_feather_esp32s3.menu.FlashMode.dio.build.flash_freq=80m
|
|
adafruit_feather_esp32s3.menu.FlashMode.opi=OPI 80MHz
|
|
adafruit_feather_esp32s3.menu.FlashMode.opi.build.flash_mode=dout
|
|
adafruit_feather_esp32s3.menu.FlashMode.opi.build.boot=opi
|
|
adafruit_feather_esp32s3.menu.FlashMode.opi.build.boot_freq=80m
|
|
adafruit_feather_esp32s3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
adafruit_feather_esp32s3.menu.FlashSize.4M=4MB (32Mb)
|
|
adafruit_feather_esp32s3.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
adafruit_feather_esp32s3.menu.UploadSpeed.921600=921600
|
|
adafruit_feather_esp32s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_feather_esp32s3.menu.UploadSpeed.115200=115200
|
|
adafruit_feather_esp32s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_feather_esp32s3.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_feather_esp32s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_feather_esp32s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_feather_esp32s3.menu.UploadSpeed.230400=230400
|
|
adafruit_feather_esp32s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_feather_esp32s3.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_feather_esp32s3.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_feather_esp32s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_feather_esp32s3.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_feather_esp32s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_feather_esp32s3.menu.DebugLevel.none=None
|
|
adafruit_feather_esp32s3.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_feather_esp32s3.menu.DebugLevel.error=Error
|
|
adafruit_feather_esp32s3.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_feather_esp32s3.menu.DebugLevel.warn=Warn
|
|
adafruit_feather_esp32s3.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_feather_esp32s3.menu.DebugLevel.info=Info
|
|
adafruit_feather_esp32s3.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_feather_esp32s3.menu.DebugLevel.debug=Debug
|
|
adafruit_feather_esp32s3.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_feather_esp32s3.menu.DebugLevel.verbose=Verbose
|
|
adafruit_feather_esp32s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_feather_esp32s3.menu.EraseFlash.none=Disabled
|
|
adafruit_feather_esp32s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_feather_esp32s3.menu.EraseFlash.all=Enabled
|
|
adafruit_feather_esp32s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_feather_esp32s3.menu.ZigbeeMode.default=Disabled
|
|
adafruit_feather_esp32s3.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_feather_esp32s3.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_feather_esp32s3.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_feather_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_feather_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit Feather ESP32-S3 No PSRAM
|
|
|
|
adafruit_feather_esp32s3_nopsram.name=Adafruit Feather ESP32-S3 No PSRAM
|
|
adafruit_feather_esp32s3_nopsram.vid.0=0x239A
|
|
adafruit_feather_esp32s3_nopsram.pid.0=0x8113
|
|
adafruit_feather_esp32s3_nopsram.vid.1=0x239A
|
|
adafruit_feather_esp32s3_nopsram.pid.1=0x0113
|
|
adafruit_feather_esp32s3_nopsram.vid.2=0x239A
|
|
adafruit_feather_esp32s3_nopsram.pid.2=0x8114
|
|
adafruit_feather_esp32s3_nopsram.upload_port.0.vid=0x239A
|
|
adafruit_feather_esp32s3_nopsram.upload_port.0.pid=0x8113
|
|
adafruit_feather_esp32s3_nopsram.upload_port.1.vid=0x239A
|
|
adafruit_feather_esp32s3_nopsram.upload_port.1.pid=0x0113
|
|
adafruit_feather_esp32s3_nopsram.upload_port.2.vid=0x239A
|
|
adafruit_feather_esp32s3_nopsram.upload_port.2.pid=0x8114
|
|
|
|
adafruit_feather_esp32s3_nopsram.bootloader.tool=esptool_py
|
|
adafruit_feather_esp32s3_nopsram.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_feather_esp32s3_nopsram.upload.tool=esptool_py
|
|
adafruit_feather_esp32s3_nopsram.upload.tool.default=esptool_py
|
|
adafruit_feather_esp32s3_nopsram.upload.tool.network=esp_ota
|
|
|
|
adafruit_feather_esp32s3_nopsram.upload.maximum_size=1310720
|
|
adafruit_feather_esp32s3_nopsram.upload.maximum_data_size=327680
|
|
adafruit_feather_esp32s3_nopsram.upload.flags=
|
|
adafruit_feather_esp32s3_nopsram.upload.extra_flags=
|
|
adafruit_feather_esp32s3_nopsram.upload.use_1200bps_touch=true
|
|
adafruit_feather_esp32s3_nopsram.upload.wait_for_upload_port=true
|
|
|
|
adafruit_feather_esp32s3_nopsram.serial.disableDTR=false
|
|
adafruit_feather_esp32s3_nopsram.serial.disableRTS=false
|
|
|
|
adafruit_feather_esp32s3_nopsram.build.tarch=xtensa
|
|
adafruit_feather_esp32s3_nopsram.build.bootloader_addr=0x0
|
|
adafruit_feather_esp32s3_nopsram.build.target=esp32s3
|
|
adafruit_feather_esp32s3_nopsram.build.mcu=esp32s3
|
|
adafruit_feather_esp32s3_nopsram.build.core=esp32
|
|
adafruit_feather_esp32s3_nopsram.build.variant=adafruit_feather_esp32s3_nopsram
|
|
adafruit_feather_esp32s3_nopsram.build.board=ADAFRUIT_FEATHER_ESP32S3_NOPSRAM
|
|
|
|
adafruit_feather_esp32s3_nopsram.build.usb_mode=0
|
|
adafruit_feather_esp32s3_nopsram.build.cdc_on_boot=1
|
|
adafruit_feather_esp32s3_nopsram.build.msc_on_boot=0
|
|
adafruit_feather_esp32s3_nopsram.build.dfu_on_boot=0
|
|
adafruit_feather_esp32s3_nopsram.build.f_cpu=240000000L
|
|
adafruit_feather_esp32s3_nopsram.build.flash_size=8MB
|
|
adafruit_feather_esp32s3_nopsram.build.flash_freq=80m
|
|
adafruit_feather_esp32s3_nopsram.build.flash_mode=dio
|
|
adafruit_feather_esp32s3_nopsram.build.boot=qio
|
|
adafruit_feather_esp32s3_nopsram.build.partitions=default
|
|
adafruit_feather_esp32s3_nopsram.build.defines=
|
|
adafruit_feather_esp32s3_nopsram.build.loop_core=
|
|
adafruit_feather_esp32s3_nopsram.build.event_core=
|
|
adafruit_feather_esp32s3_nopsram.build.flash_type=qio
|
|
adafruit_feather_esp32s3_nopsram.build.psram_type=qspi
|
|
adafruit_feather_esp32s3_nopsram.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
adafruit_feather_esp32s3_nopsram.menu.LoopCore.1=Core 1
|
|
adafruit_feather_esp32s3_nopsram.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
adafruit_feather_esp32s3_nopsram.menu.LoopCore.0=Core 0
|
|
adafruit_feather_esp32s3_nopsram.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
adafruit_feather_esp32s3_nopsram.menu.EventsCore.1=Core 1
|
|
adafruit_feather_esp32s3_nopsram.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
adafruit_feather_esp32s3_nopsram.menu.EventsCore.0=Core 0
|
|
adafruit_feather_esp32s3_nopsram.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
adafruit_feather_esp32s3_nopsram.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
adafruit_feather_esp32s3_nopsram.menu.USBMode.default.build.usb_mode=0
|
|
adafruit_feather_esp32s3_nopsram.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
adafruit_feather_esp32s3_nopsram.menu.USBMode.hwcdc.build.usb_mode=1
|
|
|
|
adafruit_feather_esp32s3_nopsram.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_feather_esp32s3_nopsram.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_feather_esp32s3_nopsram.menu.CDCOnBoot.default=Disabled
|
|
adafruit_feather_esp32s3_nopsram.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_feather_esp32s3_nopsram.menu.MSCOnBoot.default=Disabled
|
|
adafruit_feather_esp32s3_nopsram.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
adafruit_feather_esp32s3_nopsram.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
adafruit_feather_esp32s3_nopsram.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
adafruit_feather_esp32s3_nopsram.menu.DFUOnBoot.default=Disabled
|
|
adafruit_feather_esp32s3_nopsram.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
adafruit_feather_esp32s3_nopsram.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
adafruit_feather_esp32s3_nopsram.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadMode.default=UART0 / Hardware CDC
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
adafruit_feather_esp32s3_nopsram.menu.PartitionScheme.tinyuf2=TinyUF2 8MB (2MB APP/3.7MB FATFS)
|
|
adafruit_feather_esp32s3_nopsram.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_feather_esp32s3_nopsram.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-8MB
|
|
adafruit_feather_esp32s3_nopsram.menu.PartitionScheme.tinyuf2.upload.maximum_size=2097152
|
|
adafruit_feather_esp32s3_nopsram.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_feather_esp32s3_nopsram.menu.PartitionScheme.tinyuf2_noota=TinyUF2 8MB No OTA (4MB APP/3.7MB FATFS)
|
|
adafruit_feather_esp32s3_nopsram.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_feather_esp32s3_nopsram.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-8MB-noota
|
|
adafruit_feather_esp32s3_nopsram.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=4194304
|
|
adafruit_feather_esp32s3_nopsram.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_feather_esp32s3_nopsram.menu.PartitionScheme.default_8MB=Default (3MB APP/1.5MB SPIFFS)
|
|
adafruit_feather_esp32s3_nopsram.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
adafruit_feather_esp32s3_nopsram.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
|
|
adafruit_feather_esp32s3_nopsram.menu.CPUFreq.240=240MHz (WiFi)
|
|
adafruit_feather_esp32s3_nopsram.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_feather_esp32s3_nopsram.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_feather_esp32s3_nopsram.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_feather_esp32s3_nopsram.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_feather_esp32s3_nopsram.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_feather_esp32s3_nopsram.menu.CPUFreq.40=40MHz
|
|
adafruit_feather_esp32s3_nopsram.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_feather_esp32s3_nopsram.menu.CPUFreq.20=20MHz
|
|
adafruit_feather_esp32s3_nopsram.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_feather_esp32s3_nopsram.menu.CPUFreq.10=10MHz
|
|
adafruit_feather_esp32s3_nopsram.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.qio=QIO 80MHz
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.qio.build.boot_freq=80m
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.qio.build.flash_freq=80m
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.qio120=QIO 120MHz
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.qio120.build.flash_mode=dio
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.qio120.build.boot=qio
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.qio120.build.boot_freq=120m
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.qio120.build.flash_freq=80m
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.dio=DIO 80MHz
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.dio.build.boot=dio
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.dio.build.boot_freq=80m
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.dio.build.flash_freq=80m
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.opi=OPI 80MHz
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.opi.build.flash_mode=dout
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.opi.build.boot=opi
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.opi.build.boot_freq=80m
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashSize.8M=8MB (64Mb)
|
|
adafruit_feather_esp32s3_nopsram.menu.FlashSize.8M.build.flash_size=8MB
|
|
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadSpeed.921600=921600
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadSpeed.115200=115200
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadSpeed.230400=230400
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_feather_esp32s3_nopsram.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_feather_esp32s3_nopsram.menu.DebugLevel.none=None
|
|
adafruit_feather_esp32s3_nopsram.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_feather_esp32s3_nopsram.menu.DebugLevel.error=Error
|
|
adafruit_feather_esp32s3_nopsram.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_feather_esp32s3_nopsram.menu.DebugLevel.warn=Warn
|
|
adafruit_feather_esp32s3_nopsram.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_feather_esp32s3_nopsram.menu.DebugLevel.info=Info
|
|
adafruit_feather_esp32s3_nopsram.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_feather_esp32s3_nopsram.menu.DebugLevel.debug=Debug
|
|
adafruit_feather_esp32s3_nopsram.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_feather_esp32s3_nopsram.menu.DebugLevel.verbose=Verbose
|
|
adafruit_feather_esp32s3_nopsram.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_feather_esp32s3_nopsram.menu.EraseFlash.none=Disabled
|
|
adafruit_feather_esp32s3_nopsram.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_feather_esp32s3_nopsram.menu.EraseFlash.all=Enabled
|
|
adafruit_feather_esp32s3_nopsram.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_feather_esp32s3_nopsram.menu.ZigbeeMode.default=Disabled
|
|
adafruit_feather_esp32s3_nopsram.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_feather_esp32s3_nopsram.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_feather_esp32s3_nopsram.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_feather_esp32s3_nopsram.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_feather_esp32s3_nopsram.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit Feather ESP32-S3 TFT
|
|
|
|
adafruit_feather_esp32s3_tft.name=Adafruit Feather ESP32-S3 TFT
|
|
adafruit_feather_esp32s3_tft.vid.0=0x239A
|
|
adafruit_feather_esp32s3_tft.pid.0=0x811D
|
|
adafruit_feather_esp32s3_tft.vid.1=0x239A
|
|
adafruit_feather_esp32s3_tft.pid.1=0x011D
|
|
adafruit_feather_esp32s3_tft.vid.2=0x239A
|
|
adafruit_feather_esp32s3_tft.pid.2=0x811E
|
|
adafruit_feather_esp32s3_tft.upload_port.0.vid=0x239A
|
|
adafruit_feather_esp32s3_tft.upload_port.0.pid=0x811D
|
|
adafruit_feather_esp32s3_tft.upload_port.1.vid=0x239A
|
|
adafruit_feather_esp32s3_tft.upload_port.1.pid=0x011D
|
|
adafruit_feather_esp32s3_tft.upload_port.2.vid=0x239A
|
|
adafruit_feather_esp32s3_tft.upload_port.2.pid=0x811E
|
|
|
|
adafruit_feather_esp32s3_tft.bootloader.tool=esptool_py
|
|
adafruit_feather_esp32s3_tft.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_feather_esp32s3_tft.upload.tool=esptool_py
|
|
adafruit_feather_esp32s3_tft.upload.tool.default=esptool_py
|
|
adafruit_feather_esp32s3_tft.upload.tool.network=esp_ota
|
|
|
|
adafruit_feather_esp32s3_tft.upload.maximum_size=1310720
|
|
adafruit_feather_esp32s3_tft.upload.maximum_data_size=327680
|
|
adafruit_feather_esp32s3_tft.upload.flags=
|
|
adafruit_feather_esp32s3_tft.upload.extra_flags=
|
|
adafruit_feather_esp32s3_tft.upload.use_1200bps_touch=true
|
|
adafruit_feather_esp32s3_tft.upload.wait_for_upload_port=true
|
|
|
|
adafruit_feather_esp32s3_tft.serial.disableDTR=false
|
|
adafruit_feather_esp32s3_tft.serial.disableRTS=false
|
|
|
|
adafruit_feather_esp32s3_tft.build.tarch=xtensa
|
|
adafruit_feather_esp32s3_tft.build.bootloader_addr=0x0
|
|
adafruit_feather_esp32s3_tft.build.target=esp32s3
|
|
adafruit_feather_esp32s3_tft.build.mcu=esp32s3
|
|
adafruit_feather_esp32s3_tft.build.core=esp32
|
|
adafruit_feather_esp32s3_tft.build.variant=adafruit_feather_esp32s3_tft
|
|
adafruit_feather_esp32s3_tft.build.board=ADAFRUIT_FEATHER_ESP32S3_TFT
|
|
|
|
adafruit_feather_esp32s3_tft.build.usb_mode=0
|
|
adafruit_feather_esp32s3_tft.build.cdc_on_boot=1
|
|
adafruit_feather_esp32s3_tft.build.msc_on_boot=0
|
|
adafruit_feather_esp32s3_tft.build.dfu_on_boot=0
|
|
adafruit_feather_esp32s3_tft.build.f_cpu=240000000L
|
|
adafruit_feather_esp32s3_tft.build.flash_size=4MB
|
|
adafruit_feather_esp32s3_tft.build.flash_freq=80m
|
|
adafruit_feather_esp32s3_tft.build.flash_mode=dio
|
|
adafruit_feather_esp32s3_tft.build.boot=qio
|
|
adafruit_feather_esp32s3_tft.build.partitions=default
|
|
adafruit_feather_esp32s3_tft.build.defines=
|
|
adafruit_feather_esp32s3_tft.build.loop_core=
|
|
adafruit_feather_esp32s3_tft.build.event_core=
|
|
adafruit_feather_esp32s3_tft.build.flash_type=qio
|
|
adafruit_feather_esp32s3_tft.build.psram_type=qspi
|
|
adafruit_feather_esp32s3_tft.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
adafruit_feather_esp32s3_tft.menu.LoopCore.1=Core 1
|
|
adafruit_feather_esp32s3_tft.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
adafruit_feather_esp32s3_tft.menu.LoopCore.0=Core 0
|
|
adafruit_feather_esp32s3_tft.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
adafruit_feather_esp32s3_tft.menu.EventsCore.1=Core 1
|
|
adafruit_feather_esp32s3_tft.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
adafruit_feather_esp32s3_tft.menu.EventsCore.0=Core 0
|
|
adafruit_feather_esp32s3_tft.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
adafruit_feather_esp32s3_tft.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
adafruit_feather_esp32s3_tft.menu.USBMode.default.build.usb_mode=0
|
|
adafruit_feather_esp32s3_tft.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
adafruit_feather_esp32s3_tft.menu.USBMode.hwcdc.build.usb_mode=1
|
|
|
|
adafruit_feather_esp32s3_tft.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_feather_esp32s3_tft.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_feather_esp32s3_tft.menu.CDCOnBoot.default=Disabled
|
|
adafruit_feather_esp32s3_tft.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_feather_esp32s3_tft.menu.MSCOnBoot.default=Disabled
|
|
adafruit_feather_esp32s3_tft.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
adafruit_feather_esp32s3_tft.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
adafruit_feather_esp32s3_tft.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
adafruit_feather_esp32s3_tft.menu.DFUOnBoot.default=Disabled
|
|
adafruit_feather_esp32s3_tft.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
adafruit_feather_esp32s3_tft.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
adafruit_feather_esp32s3_tft.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
adafruit_feather_esp32s3_tft.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
adafruit_feather_esp32s3_tft.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
adafruit_feather_esp32s3_tft.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
adafruit_feather_esp32s3_tft.menu.UploadMode.default=UART0 / Hardware CDC
|
|
adafruit_feather_esp32s3_tft.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
adafruit_feather_esp32s3_tft.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
adafruit_feather_esp32s3_tft.menu.PSRAM.enabled=QSPI PSRAM
|
|
adafruit_feather_esp32s3_tft.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_feather_esp32s3_tft.menu.PSRAM.enabled.build.psram_type=qspi
|
|
adafruit_feather_esp32s3_tft.menu.PSRAM.disabled=Disabled
|
|
adafruit_feather_esp32s3_tft.menu.PSRAM.disabled.build.defines=
|
|
adafruit_feather_esp32s3_tft.menu.PSRAM.disabled.build.psram_type=qspi
|
|
adafruit_feather_esp32s3_tft.menu.PSRAM.opi=OPI PSRAM
|
|
adafruit_feather_esp32s3_tft.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_feather_esp32s3_tft.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.tinyuf2=TinyUF2 4MB (1.3MB APP/960KB FATFS)
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-4MB
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.tinyuf2.upload.maximum_size=1441792
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.tinyuf2_noota=TinyUF2 4MB No OTA (2.7MB APP/960KB FATFS)
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-4MB-noota
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=2883584
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.default.build.partitions=default
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
adafruit_feather_esp32s3_tft.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
adafruit_feather_esp32s3_tft.menu.CPUFreq.240=240MHz (WiFi)
|
|
adafruit_feather_esp32s3_tft.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_feather_esp32s3_tft.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_feather_esp32s3_tft.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_feather_esp32s3_tft.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_feather_esp32s3_tft.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_feather_esp32s3_tft.menu.CPUFreq.40=40MHz
|
|
adafruit_feather_esp32s3_tft.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_feather_esp32s3_tft.menu.CPUFreq.20=20MHz
|
|
adafruit_feather_esp32s3_tft.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_feather_esp32s3_tft.menu.CPUFreq.10=10MHz
|
|
adafruit_feather_esp32s3_tft.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.qio=QIO 80MHz
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.qio.build.boot_freq=80m
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.qio.build.flash_freq=80m
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.qio120=QIO 120MHz
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.qio120.build.flash_mode=dio
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.qio120.build.boot=qio
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.qio120.build.boot_freq=120m
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.qio120.build.flash_freq=80m
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.dio=DIO 80MHz
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.dio.build.boot=dio
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.dio.build.boot_freq=80m
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.dio.build.flash_freq=80m
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.opi=OPI 80MHz
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.opi.build.flash_mode=dout
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.opi.build.boot=opi
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.opi.build.boot_freq=80m
|
|
adafruit_feather_esp32s3_tft.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
adafruit_feather_esp32s3_tft.menu.FlashSize.4M=4MB (32Mb)
|
|
adafruit_feather_esp32s3_tft.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
adafruit_feather_esp32s3_tft.menu.UploadSpeed.921600=921600
|
|
adafruit_feather_esp32s3_tft.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_feather_esp32s3_tft.menu.UploadSpeed.115200=115200
|
|
adafruit_feather_esp32s3_tft.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_feather_esp32s3_tft.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_feather_esp32s3_tft.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_feather_esp32s3_tft.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_feather_esp32s3_tft.menu.UploadSpeed.230400=230400
|
|
adafruit_feather_esp32s3_tft.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_feather_esp32s3_tft.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_feather_esp32s3_tft.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_feather_esp32s3_tft.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_feather_esp32s3_tft.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_feather_esp32s3_tft.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_feather_esp32s3_tft.menu.DebugLevel.none=None
|
|
adafruit_feather_esp32s3_tft.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_feather_esp32s3_tft.menu.DebugLevel.error=Error
|
|
adafruit_feather_esp32s3_tft.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_feather_esp32s3_tft.menu.DebugLevel.warn=Warn
|
|
adafruit_feather_esp32s3_tft.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_feather_esp32s3_tft.menu.DebugLevel.info=Info
|
|
adafruit_feather_esp32s3_tft.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_feather_esp32s3_tft.menu.DebugLevel.debug=Debug
|
|
adafruit_feather_esp32s3_tft.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_feather_esp32s3_tft.menu.DebugLevel.verbose=Verbose
|
|
adafruit_feather_esp32s3_tft.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_feather_esp32s3_tft.menu.EraseFlash.none=Disabled
|
|
adafruit_feather_esp32s3_tft.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_feather_esp32s3_tft.menu.EraseFlash.all=Enabled
|
|
adafruit_feather_esp32s3_tft.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_feather_esp32s3_tft.menu.ZigbeeMode.default=Disabled
|
|
adafruit_feather_esp32s3_tft.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_feather_esp32s3_tft.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_feather_esp32s3_tft.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_feather_esp32s3_tft.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_feather_esp32s3_tft.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit Feather ESP32-S3 Reverse TFT
|
|
|
|
adafruit_feather_esp32s3_reversetft.name=Adafruit Feather ESP32-S3 Reverse TFT
|
|
adafruit_feather_esp32s3_reversetft.vid.0=0x239A
|
|
adafruit_feather_esp32s3_reversetft.pid.0=0x8123
|
|
adafruit_feather_esp32s3_reversetft.vid.1=0x239A
|
|
adafruit_feather_esp32s3_reversetft.pid.1=0x0123
|
|
adafruit_feather_esp32s3_reversetft.vid.2=0x239A
|
|
adafruit_feather_esp32s3_reversetft.pid.2=0x8124
|
|
adafruit_feather_esp32s3_reversetft.upload_port.0.vid=0x239A
|
|
adafruit_feather_esp32s3_reversetft.upload_port.0.pid=0x8123
|
|
adafruit_feather_esp32s3_reversetft.upload_port.1.vid=0x239A
|
|
adafruit_feather_esp32s3_reversetft.upload_port.1.pid=0x0123
|
|
adafruit_feather_esp32s3_reversetft.upload_port.2.vid=0x239A
|
|
adafruit_feather_esp32s3_reversetft.upload_port.2.pid=0x8124
|
|
|
|
adafruit_feather_esp32s3_reversetft.bootloader.tool=esptool_py
|
|
adafruit_feather_esp32s3_reversetft.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_feather_esp32s3_reversetft.upload.tool=esptool_py
|
|
adafruit_feather_esp32s3_reversetft.upload.tool.default=esptool_py
|
|
adafruit_feather_esp32s3_reversetft.upload.tool.network=esp_ota
|
|
|
|
adafruit_feather_esp32s3_reversetft.upload.maximum_size=1310720
|
|
adafruit_feather_esp32s3_reversetft.upload.maximum_data_size=327680
|
|
adafruit_feather_esp32s3_reversetft.upload.flags=
|
|
adafruit_feather_esp32s3_reversetft.upload.extra_flags=
|
|
adafruit_feather_esp32s3_reversetft.upload.use_1200bps_touch=true
|
|
adafruit_feather_esp32s3_reversetft.upload.wait_for_upload_port=true
|
|
|
|
adafruit_feather_esp32s3_reversetft.serial.disableDTR=false
|
|
adafruit_feather_esp32s3_reversetft.serial.disableRTS=false
|
|
|
|
adafruit_feather_esp32s3_reversetft.build.tarch=xtensa
|
|
adafruit_feather_esp32s3_reversetft.build.bootloader_addr=0x0
|
|
adafruit_feather_esp32s3_reversetft.build.target=esp32s3
|
|
adafruit_feather_esp32s3_reversetft.build.mcu=esp32s3
|
|
adafruit_feather_esp32s3_reversetft.build.core=esp32
|
|
adafruit_feather_esp32s3_reversetft.build.variant=adafruit_feather_esp32s3_reversetft
|
|
adafruit_feather_esp32s3_reversetft.build.board=ADAFRUIT_FEATHER_ESP32S3_REVTFT
|
|
|
|
adafruit_feather_esp32s3_reversetft.build.usb_mode=0
|
|
adafruit_feather_esp32s3_reversetft.build.cdc_on_boot=1
|
|
adafruit_feather_esp32s3_reversetft.build.msc_on_boot=0
|
|
adafruit_feather_esp32s3_reversetft.build.dfu_on_boot=0
|
|
adafruit_feather_esp32s3_reversetft.build.f_cpu=240000000L
|
|
adafruit_feather_esp32s3_reversetft.build.flash_size=4MB
|
|
adafruit_feather_esp32s3_reversetft.build.flash_freq=80m
|
|
adafruit_feather_esp32s3_reversetft.build.flash_mode=dio
|
|
adafruit_feather_esp32s3_reversetft.build.boot=qio
|
|
adafruit_feather_esp32s3_reversetft.build.partitions=default
|
|
adafruit_feather_esp32s3_reversetft.build.defines=
|
|
adafruit_feather_esp32s3_reversetft.build.loop_core=
|
|
adafruit_feather_esp32s3_reversetft.build.event_core=
|
|
adafruit_feather_esp32s3_reversetft.build.flash_type=qio
|
|
adafruit_feather_esp32s3_reversetft.build.psram_type=qspi
|
|
adafruit_feather_esp32s3_reversetft.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
adafruit_feather_esp32s3_reversetft.menu.LoopCore.1=Core 1
|
|
adafruit_feather_esp32s3_reversetft.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
adafruit_feather_esp32s3_reversetft.menu.LoopCore.0=Core 0
|
|
adafruit_feather_esp32s3_reversetft.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
adafruit_feather_esp32s3_reversetft.menu.EventsCore.1=Core 1
|
|
adafruit_feather_esp32s3_reversetft.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
adafruit_feather_esp32s3_reversetft.menu.EventsCore.0=Core 0
|
|
adafruit_feather_esp32s3_reversetft.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
adafruit_feather_esp32s3_reversetft.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
adafruit_feather_esp32s3_reversetft.menu.USBMode.default.build.usb_mode=0
|
|
adafruit_feather_esp32s3_reversetft.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
adafruit_feather_esp32s3_reversetft.menu.USBMode.hwcdc.build.usb_mode=1
|
|
|
|
adafruit_feather_esp32s3_reversetft.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_feather_esp32s3_reversetft.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_feather_esp32s3_reversetft.menu.CDCOnBoot.default=Disabled
|
|
adafruit_feather_esp32s3_reversetft.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_feather_esp32s3_reversetft.menu.MSCOnBoot.default=Disabled
|
|
adafruit_feather_esp32s3_reversetft.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
adafruit_feather_esp32s3_reversetft.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
adafruit_feather_esp32s3_reversetft.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
adafruit_feather_esp32s3_reversetft.menu.DFUOnBoot.default=Disabled
|
|
adafruit_feather_esp32s3_reversetft.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
adafruit_feather_esp32s3_reversetft.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
adafruit_feather_esp32s3_reversetft.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadMode.default=UART0 / Hardware CDC
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
adafruit_feather_esp32s3_reversetft.menu.PSRAM.enabled=QSPI PSRAM
|
|
adafruit_feather_esp32s3_reversetft.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_feather_esp32s3_reversetft.menu.PSRAM.enabled.build.psram_type=qspi
|
|
adafruit_feather_esp32s3_reversetft.menu.PSRAM.disabled=Disabled
|
|
adafruit_feather_esp32s3_reversetft.menu.PSRAM.disabled.build.defines=
|
|
adafruit_feather_esp32s3_reversetft.menu.PSRAM.disabled.build.psram_type=qspi
|
|
adafruit_feather_esp32s3_reversetft.menu.PSRAM.opi=OPI PSRAM
|
|
adafruit_feather_esp32s3_reversetft.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_feather_esp32s3_reversetft.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.tinyuf2=TinyUF2 4MB (1.3MB APP/960KB FATFS)
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-4MB
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.tinyuf2.upload.maximum_size=1441792
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.tinyuf2_noota=TinyUF2 4MB No OTA (2.7MB APP/960KB FATFS)
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-4MB-noota
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=2883584
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.default.build.partitions=default
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
adafruit_feather_esp32s3_reversetft.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
adafruit_feather_esp32s3_reversetft.menu.CPUFreq.240=240MHz (WiFi)
|
|
adafruit_feather_esp32s3_reversetft.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_feather_esp32s3_reversetft.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_feather_esp32s3_reversetft.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_feather_esp32s3_reversetft.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_feather_esp32s3_reversetft.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_feather_esp32s3_reversetft.menu.CPUFreq.40=40MHz
|
|
adafruit_feather_esp32s3_reversetft.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_feather_esp32s3_reversetft.menu.CPUFreq.20=20MHz
|
|
adafruit_feather_esp32s3_reversetft.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_feather_esp32s3_reversetft.menu.CPUFreq.10=10MHz
|
|
adafruit_feather_esp32s3_reversetft.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.qio=QIO 80MHz
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.qio.build.boot_freq=80m
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.qio.build.flash_freq=80m
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.qio120=QIO 120MHz
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.qio120.build.flash_mode=dio
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.qio120.build.boot=qio
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.qio120.build.boot_freq=120m
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.qio120.build.flash_freq=80m
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.dio=DIO 80MHz
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.dio.build.boot=dio
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.dio.build.boot_freq=80m
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.dio.build.flash_freq=80m
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.opi=OPI 80MHz
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.opi.build.flash_mode=dout
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.opi.build.boot=opi
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.opi.build.boot_freq=80m
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashSize.4M=4MB (32Mb)
|
|
adafruit_feather_esp32s3_reversetft.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadSpeed.921600=921600
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadSpeed.115200=115200
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadSpeed.230400=230400
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_feather_esp32s3_reversetft.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_feather_esp32s3_reversetft.menu.DebugLevel.none=None
|
|
adafruit_feather_esp32s3_reversetft.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_feather_esp32s3_reversetft.menu.DebugLevel.error=Error
|
|
adafruit_feather_esp32s3_reversetft.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_feather_esp32s3_reversetft.menu.DebugLevel.warn=Warn
|
|
adafruit_feather_esp32s3_reversetft.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_feather_esp32s3_reversetft.menu.DebugLevel.info=Info
|
|
adafruit_feather_esp32s3_reversetft.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_feather_esp32s3_reversetft.menu.DebugLevel.debug=Debug
|
|
adafruit_feather_esp32s3_reversetft.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_feather_esp32s3_reversetft.menu.DebugLevel.verbose=Verbose
|
|
adafruit_feather_esp32s3_reversetft.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_feather_esp32s3_reversetft.menu.EraseFlash.none=Disabled
|
|
adafruit_feather_esp32s3_reversetft.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_feather_esp32s3_reversetft.menu.EraseFlash.all=Enabled
|
|
adafruit_feather_esp32s3_reversetft.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_feather_esp32s3_reversetft.menu.ZigbeeMode.default=Disabled
|
|
adafruit_feather_esp32s3_reversetft.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_feather_esp32s3_reversetft.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_feather_esp32s3_reversetft.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_feather_esp32s3_reversetft.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_feather_esp32s3_reversetft.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
#############################
|
|
# Feather C6
|
|
|
|
|
|
adafruit_feather_esp32c6.name=Adafruit Feather ESP32-C6
|
|
|
|
adafruit_feather_esp32c6.bootloader.tool=esptool_py
|
|
adafruit_feather_esp32c6.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_feather_esp32c6.upload.tool=esptool_py
|
|
adafruit_feather_esp32c6.upload.tool.default=esptool_py
|
|
adafruit_feather_esp32c6.upload.tool.network=esp_ota
|
|
|
|
adafruit_feather_esp32c6.upload.maximum_size=1310720
|
|
adafruit_feather_esp32c6.upload.maximum_data_size=327680
|
|
adafruit_feather_esp32c6.upload.flags=
|
|
adafruit_feather_esp32c6.upload.extra_flags=
|
|
adafruit_feather_esp32c6.upload.use_1200bps_touch=false
|
|
adafruit_feather_esp32c6.upload.wait_for_upload_port=false
|
|
|
|
adafruit_feather_esp32c6.serial.disableDTR=false
|
|
adafruit_feather_esp32c6.serial.disableRTS=false
|
|
|
|
adafruit_feather_esp32c6.build.tarch=riscv32
|
|
adafruit_feather_esp32c6.build.target=esp
|
|
adafruit_feather_esp32c6.build.mcu=esp32c6
|
|
adafruit_feather_esp32c6.build.core=esp32
|
|
adafruit_feather_esp32c6.build.variant=adafruit_feather_esp32c6
|
|
adafruit_feather_esp32c6.build.board=ADAFRUIT_FEATHER_ESP32C6
|
|
adafruit_feather_esp32c6.build.bootloader_addr=0x0
|
|
|
|
adafruit_feather_esp32c6.build.cdc_on_boot=0
|
|
adafruit_feather_esp32c6.build.f_cpu=160000000L
|
|
adafruit_feather_esp32c6.build.flash_size=4MB
|
|
adafruit_feather_esp32c6.build.flash_freq=80m
|
|
adafruit_feather_esp32c6.build.flash_mode=qio
|
|
adafruit_feather_esp32c6.build.boot=qio
|
|
adafruit_feather_esp32c6.build.partitions=default
|
|
adafruit_feather_esp32c6.build.defines=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
adafruit_feather_esp32c6.menu.JTAGAdapter.default=Disabled
|
|
adafruit_feather_esp32c6.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
adafruit_feather_esp32c6.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
adafruit_feather_esp32c6.menu.JTAGAdapter.builtin.build.openocdscript=esp32c6-builtin.cfg
|
|
adafruit_feather_esp32c6.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
adafruit_feather_esp32c6.menu.JTAGAdapter.external=FTDI Adapter
|
|
adafruit_feather_esp32c6.menu.JTAGAdapter.external.build.openocdscript=esp32c6-ftdi.cfg
|
|
adafruit_feather_esp32c6.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
adafruit_feather_esp32c6.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
adafruit_feather_esp32c6.menu.JTAGAdapter.bridge.build.openocdscript=esp32c6-bridge.cfg
|
|
adafruit_feather_esp32c6.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
adafruit_feather_esp32c6.menu.CDCOnBoot.default=Disabled
|
|
adafruit_feather_esp32c6.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
adafruit_feather_esp32c6.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_feather_esp32c6.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.default.build.partitions=default
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.zigbee=Zigbee 4MB with spiffs
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.zigbee.build.partitions=zigbee
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.zigbee.upload.maximum_size=1310720
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.custom=Custom
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.custom.build.partitions=
|
|
adafruit_feather_esp32c6.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
adafruit_feather_esp32c6.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_feather_esp32c6.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_feather_esp32c6.menu.CPUFreq.120=120MHz (WiFi)
|
|
adafruit_feather_esp32c6.menu.CPUFreq.120.build.f_cpu=120000000L
|
|
adafruit_feather_esp32c6.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_feather_esp32c6.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_feather_esp32c6.menu.CPUFreq.40=40MHz
|
|
adafruit_feather_esp32c6.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_feather_esp32c6.menu.CPUFreq.20=20MHz
|
|
adafruit_feather_esp32c6.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_feather_esp32c6.menu.CPUFreq.10=10MHz
|
|
adafruit_feather_esp32c6.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_feather_esp32c6.menu.FlashMode.qio=QIO
|
|
adafruit_feather_esp32c6.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_feather_esp32c6.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_feather_esp32c6.menu.FlashMode.dio=DIO
|
|
adafruit_feather_esp32c6.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_feather_esp32c6.menu.FlashMode.dio.build.boot=dio
|
|
|
|
adafruit_feather_esp32c6.menu.FlashFreq.80=80MHz
|
|
adafruit_feather_esp32c6.menu.FlashFreq.80.build.flash_freq=80m
|
|
adafruit_feather_esp32c6.menu.FlashFreq.40=40MHz
|
|
adafruit_feather_esp32c6.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
adafruit_feather_esp32c6.menu.UploadSpeed.921600=921600
|
|
adafruit_feather_esp32c6.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_feather_esp32c6.menu.UploadSpeed.115200=115200
|
|
adafruit_feather_esp32c6.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_feather_esp32c6.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_feather_esp32c6.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_feather_esp32c6.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_feather_esp32c6.menu.UploadSpeed.230400=230400
|
|
adafruit_feather_esp32c6.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_feather_esp32c6.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_feather_esp32c6.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_feather_esp32c6.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_feather_esp32c6.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_feather_esp32c6.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_feather_esp32c6.menu.DebugLevel.none=None
|
|
adafruit_feather_esp32c6.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_feather_esp32c6.menu.DebugLevel.error=Error
|
|
adafruit_feather_esp32c6.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_feather_esp32c6.menu.DebugLevel.warn=Warn
|
|
adafruit_feather_esp32c6.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_feather_esp32c6.menu.DebugLevel.info=Info
|
|
adafruit_feather_esp32c6.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_feather_esp32c6.menu.DebugLevel.debug=Debug
|
|
adafruit_feather_esp32c6.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_feather_esp32c6.menu.DebugLevel.verbose=Verbose
|
|
adafruit_feather_esp32c6.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_feather_esp32c6.menu.EraseFlash.none=Disabled
|
|
adafruit_feather_esp32c6.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_feather_esp32c6.menu.EraseFlash.all=Enabled
|
|
adafruit_feather_esp32c6.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_feather_esp32c6.menu.ZigbeeMode.default=Disabled
|
|
adafruit_feather_esp32c6.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_feather_esp32c6.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_feather_esp32c6.menu.ZigbeeMode.ed=Zigbee ED (end device)
|
|
adafruit_feather_esp32c6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
|
|
adafruit_feather_esp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
|
|
adafruit_feather_esp32c6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_feather_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_feather_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
adafruit_feather_esp32c6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
|
|
adafruit_feather_esp32c6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
|
|
adafruit_feather_esp32c6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
|
|
|
|
|
|
|
|
##############################################################
|
|
# Adafruit QT Py ESP32
|
|
|
|
adafruit_qtpy_esp32_pico.name=Adafruit QT Py ESP32
|
|
|
|
adafruit_qtpy_esp32_pico.bootloader.tool=esptool_py
|
|
adafruit_qtpy_esp32_pico.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_qtpy_esp32_pico.upload.tool=esptool_py
|
|
adafruit_qtpy_esp32_pico.upload.tool.default=esptool_py
|
|
adafruit_qtpy_esp32_pico.upload.tool.network=esp_ota
|
|
|
|
adafruit_qtpy_esp32_pico.upload.maximum_size=1310720
|
|
adafruit_qtpy_esp32_pico.upload.maximum_data_size=327680
|
|
adafruit_qtpy_esp32_pico.upload.flags=
|
|
adafruit_qtpy_esp32_pico.upload.extra_flags=
|
|
|
|
adafruit_qtpy_esp32_pico.serial.disableDTR=true
|
|
adafruit_qtpy_esp32_pico.serial.disableRTS=true
|
|
|
|
adafruit_qtpy_esp32_pico.build.tarch=xtensa
|
|
adafruit_qtpy_esp32_pico.build.bootloader_addr=0x1000
|
|
adafruit_qtpy_esp32_pico.build.target=esp32
|
|
adafruit_qtpy_esp32_pico.build.mcu=esp32
|
|
adafruit_qtpy_esp32_pico.build.core=esp32
|
|
adafruit_qtpy_esp32_pico.build.variant=adafruit_qtpy_esp32
|
|
adafruit_qtpy_esp32_pico.build.board=ADAFRUIT_QTPY_ESP32_PICO
|
|
|
|
adafruit_qtpy_esp32_pico.build.f_cpu=240000000L
|
|
adafruit_qtpy_esp32_pico.build.flash_size=8MB
|
|
adafruit_qtpy_esp32_pico.build.flash_freq=80m
|
|
adafruit_qtpy_esp32_pico.build.flash_mode=dio
|
|
adafruit_qtpy_esp32_pico.build.boot=dio
|
|
adafruit_qtpy_esp32_pico.build.partitions=default
|
|
adafruit_qtpy_esp32_pico.build.defines=
|
|
adafruit_qtpy_esp32_pico.build.loop_core=
|
|
adafruit_qtpy_esp32_pico.build.event_core=
|
|
|
|
adafruit_qtpy_esp32_pico.menu.LoopCore.1=Core 1
|
|
adafruit_qtpy_esp32_pico.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
adafruit_qtpy_esp32_pico.menu.LoopCore.0=Core 0
|
|
adafruit_qtpy_esp32_pico.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
adafruit_qtpy_esp32_pico.menu.EventsCore.1=Core 1
|
|
adafruit_qtpy_esp32_pico.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
adafruit_qtpy_esp32_pico.menu.EventsCore.0=Core 0
|
|
adafruit_qtpy_esp32_pico.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
adafruit_qtpy_esp32_pico.menu.PSRAM.enabled=Enabled
|
|
adafruit_qtpy_esp32_pico.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
adafruit_qtpy_esp32_pico.menu.PSRAM.disabled=Disabled
|
|
adafruit_qtpy_esp32_pico.menu.PSRAM.disabled.build.defines=
|
|
|
|
adafruit_qtpy_esp32_pico.menu.PartitionScheme.default_8MB=Default (3MB APP/1.5MB SPIFFS)
|
|
adafruit_qtpy_esp32_pico.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
adafruit_qtpy_esp32_pico.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
|
|
adafruit_qtpy_esp32_pico.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
adafruit_qtpy_esp32_pico.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_qtpy_esp32_pico.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
adafruit_qtpy_esp32_pico.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_qtpy_esp32_pico.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
adafruit_qtpy_esp32_pico.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_qtpy_esp32_pico.menu.CPUFreq.40=40MHz
|
|
adafruit_qtpy_esp32_pico.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_qtpy_esp32_pico.menu.CPUFreq.20=20MHz
|
|
adafruit_qtpy_esp32_pico.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_qtpy_esp32_pico.menu.CPUFreq.10=10MHz
|
|
adafruit_qtpy_esp32_pico.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_qtpy_esp32_pico.menu.FlashFreq.80=80MHz
|
|
adafruit_qtpy_esp32_pico.menu.FlashFreq.80.build.flash_freq=80m
|
|
adafruit_qtpy_esp32_pico.menu.FlashFreq.40=40MHz
|
|
adafruit_qtpy_esp32_pico.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
adafruit_qtpy_esp32_pico.menu.FlashSize.8M=8MB (64Mb)
|
|
adafruit_qtpy_esp32_pico.menu.FlashSize.8M.build.flash_size=8MB
|
|
|
|
adafruit_qtpy_esp32_pico.menu.UploadSpeed.921600=921600
|
|
adafruit_qtpy_esp32_pico.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_qtpy_esp32_pico.menu.UploadSpeed.115200=115200
|
|
adafruit_qtpy_esp32_pico.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_qtpy_esp32_pico.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_qtpy_esp32_pico.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_qtpy_esp32_pico.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_qtpy_esp32_pico.menu.UploadSpeed.230400=230400
|
|
adafruit_qtpy_esp32_pico.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_qtpy_esp32_pico.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_qtpy_esp32_pico.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_qtpy_esp32_pico.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_qtpy_esp32_pico.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_qtpy_esp32_pico.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_qtpy_esp32_pico.menu.DebugLevel.none=None
|
|
adafruit_qtpy_esp32_pico.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_qtpy_esp32_pico.menu.DebugLevel.error=Error
|
|
adafruit_qtpy_esp32_pico.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_qtpy_esp32_pico.menu.DebugLevel.warn=Warn
|
|
adafruit_qtpy_esp32_pico.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_qtpy_esp32_pico.menu.DebugLevel.info=Info
|
|
adafruit_qtpy_esp32_pico.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_qtpy_esp32_pico.menu.DebugLevel.debug=Debug
|
|
adafruit_qtpy_esp32_pico.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_qtpy_esp32_pico.menu.DebugLevel.verbose=Verbose
|
|
adafruit_qtpy_esp32_pico.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_qtpy_esp32_pico.menu.EraseFlash.none=Disabled
|
|
adafruit_qtpy_esp32_pico.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_qtpy_esp32_pico.menu.EraseFlash.all=Enabled
|
|
adafruit_qtpy_esp32_pico.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_qtpy_esp32_pico.menu.ZigbeeMode.default=Disabled
|
|
adafruit_qtpy_esp32_pico.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_qtpy_esp32_pico.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_qtpy_esp32_pico.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_qtpy_esp32_pico.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_qtpy_esp32_pico.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit QT Py ESP32-C3
|
|
|
|
adafruit_qtpy_esp32c3.name=Adafruit QT Py ESP32-C3
|
|
|
|
adafruit_qtpy_esp32c3.bootloader.tool=esptool_py
|
|
adafruit_qtpy_esp32c3.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_qtpy_esp32c3.upload.tool=esptool_py
|
|
adafruit_qtpy_esp32c3.upload.tool.default=esptool_py
|
|
adafruit_qtpy_esp32c3.upload.tool.network=esp_ota
|
|
|
|
adafruit_qtpy_esp32c3.upload.maximum_size=1310720
|
|
adafruit_qtpy_esp32c3.upload.maximum_data_size=327680
|
|
adafruit_qtpy_esp32c3.upload.flags=
|
|
adafruit_qtpy_esp32c3.upload.extra_flags=
|
|
adafruit_qtpy_esp32c3.upload.use_1200bps_touch=false
|
|
adafruit_qtpy_esp32c3.upload.wait_for_upload_port=false
|
|
|
|
adafruit_qtpy_esp32c3.serial.disableDTR=false
|
|
adafruit_qtpy_esp32c3.serial.disableRTS=false
|
|
|
|
adafruit_qtpy_esp32c3.build.tarch=riscv32
|
|
adafruit_qtpy_esp32c3.build.bootloader_addr=0x0
|
|
adafruit_qtpy_esp32c3.build.target=esp
|
|
adafruit_qtpy_esp32c3.build.mcu=esp32c3
|
|
adafruit_qtpy_esp32c3.build.core=esp32
|
|
adafruit_qtpy_esp32c3.build.variant=adafruit_qtpy_esp32c3
|
|
adafruit_qtpy_esp32c3.build.board=ADAFRUIT_QTPY_ESP32C3
|
|
|
|
adafruit_qtpy_esp32c3.build.cdc_on_boot=1
|
|
adafruit_qtpy_esp32c3.build.f_cpu=160000000L
|
|
adafruit_qtpy_esp32c3.build.flash_size=4MB
|
|
adafruit_qtpy_esp32c3.build.flash_freq=80m
|
|
adafruit_qtpy_esp32c3.build.flash_mode=dio
|
|
adafruit_qtpy_esp32c3.build.boot=qio
|
|
adafruit_qtpy_esp32c3.build.partitions=default
|
|
adafruit_qtpy_esp32c3.build.defines=
|
|
|
|
adafruit_qtpy_esp32c3.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_qtpy_esp32c3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_qtpy_esp32c3.menu.CDCOnBoot.default=Disabled
|
|
adafruit_qtpy_esp32c3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.default.build.partitions=default
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
adafruit_qtpy_esp32c3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
adafruit_qtpy_esp32c3.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_qtpy_esp32c3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_qtpy_esp32c3.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_qtpy_esp32c3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_qtpy_esp32c3.menu.CPUFreq.40=40MHz
|
|
adafruit_qtpy_esp32c3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_qtpy_esp32c3.menu.CPUFreq.20=20MHz
|
|
adafruit_qtpy_esp32c3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_qtpy_esp32c3.menu.CPUFreq.10=10MHz
|
|
adafruit_qtpy_esp32c3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_qtpy_esp32c3.menu.FlashMode.qio=QIO
|
|
adafruit_qtpy_esp32c3.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_qtpy_esp32c3.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_qtpy_esp32c3.menu.FlashMode.dio=DIO
|
|
adafruit_qtpy_esp32c3.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_qtpy_esp32c3.menu.FlashMode.dio.build.boot=dio
|
|
|
|
adafruit_qtpy_esp32c3.menu.FlashFreq.80=80MHz
|
|
adafruit_qtpy_esp32c3.menu.FlashFreq.80.build.flash_freq=80m
|
|
adafruit_qtpy_esp32c3.menu.FlashFreq.40=40MHz
|
|
adafruit_qtpy_esp32c3.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
adafruit_qtpy_esp32c3.menu.FlashSize.4M=4MB (32Mb)
|
|
adafruit_qtpy_esp32c3.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
adafruit_qtpy_esp32c3.menu.UploadSpeed.921600=921600
|
|
adafruit_qtpy_esp32c3.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_qtpy_esp32c3.menu.UploadSpeed.115200=115200
|
|
adafruit_qtpy_esp32c3.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_qtpy_esp32c3.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_qtpy_esp32c3.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_qtpy_esp32c3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_qtpy_esp32c3.menu.UploadSpeed.230400=230400
|
|
adafruit_qtpy_esp32c3.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_qtpy_esp32c3.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_qtpy_esp32c3.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_qtpy_esp32c3.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_qtpy_esp32c3.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_qtpy_esp32c3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_qtpy_esp32c3.menu.DebugLevel.none=None
|
|
adafruit_qtpy_esp32c3.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_qtpy_esp32c3.menu.DebugLevel.error=Error
|
|
adafruit_qtpy_esp32c3.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_qtpy_esp32c3.menu.DebugLevel.warn=Warn
|
|
adafruit_qtpy_esp32c3.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_qtpy_esp32c3.menu.DebugLevel.info=Info
|
|
adafruit_qtpy_esp32c3.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_qtpy_esp32c3.menu.DebugLevel.debug=Debug
|
|
adafruit_qtpy_esp32c3.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_qtpy_esp32c3.menu.DebugLevel.verbose=Verbose
|
|
adafruit_qtpy_esp32c3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_qtpy_esp32c3.menu.EraseFlash.none=Disabled
|
|
adafruit_qtpy_esp32c3.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_qtpy_esp32c3.menu.EraseFlash.all=Enabled
|
|
adafruit_qtpy_esp32c3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_qtpy_esp32c3.menu.ZigbeeMode.default=Disabled
|
|
adafruit_qtpy_esp32c3.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_qtpy_esp32c3.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_qtpy_esp32c3.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_qtpy_esp32c3.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_qtpy_esp32c3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit QT Py ESP32-S2
|
|
|
|
adafruit_qtpy_esp32s2.name=Adafruit QT Py ESP32-S2
|
|
adafruit_qtpy_esp32s2.vid.0=0x239A
|
|
adafruit_qtpy_esp32s2.pid.0=0x8111
|
|
adafruit_qtpy_esp32s2.vid.1=0x239A
|
|
adafruit_qtpy_esp32s2.pid.1=0x0111
|
|
adafruit_qtpy_esp32s2.vid.2=0x239A
|
|
adafruit_qtpy_esp32s2.pid.2=0x8112
|
|
adafruit_qtpy_esp32s2.upload_port.0.vid=0x239A
|
|
adafruit_qtpy_esp32s2.upload_port.0.pid=0x8111
|
|
adafruit_qtpy_esp32s2.upload_port.1.vid=0x239A
|
|
adafruit_qtpy_esp32s2.upload_port.1.pid=0x0111
|
|
adafruit_qtpy_esp32s2.upload_port.2.vid=0x239A
|
|
adafruit_qtpy_esp32s2.upload_port.2.pid=0x8112
|
|
|
|
adafruit_qtpy_esp32s2.bootloader.tool=esptool_py
|
|
adafruit_qtpy_esp32s2.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_qtpy_esp32s2.upload.tool=esptool_py
|
|
adafruit_qtpy_esp32s2.upload.tool.default=esptool_py
|
|
adafruit_qtpy_esp32s2.upload.tool.network=esp_ota
|
|
|
|
adafruit_qtpy_esp32s2.upload.maximum_size=1310720
|
|
adafruit_qtpy_esp32s2.upload.maximum_data_size=327680
|
|
adafruit_qtpy_esp32s2.upload.flags=
|
|
adafruit_qtpy_esp32s2.upload.extra_flags=
|
|
adafruit_qtpy_esp32s2.upload.use_1200bps_touch=true
|
|
adafruit_qtpy_esp32s2.upload.wait_for_upload_port=true
|
|
|
|
adafruit_qtpy_esp32s2.serial.disableDTR=false
|
|
adafruit_qtpy_esp32s2.serial.disableRTS=false
|
|
|
|
adafruit_qtpy_esp32s2.build.tarch=xtensa
|
|
adafruit_qtpy_esp32s2.build.bootloader_addr=0x1000
|
|
adafruit_qtpy_esp32s2.build.target=esp32s2
|
|
adafruit_qtpy_esp32s2.build.mcu=esp32s2
|
|
adafruit_qtpy_esp32s2.build.core=esp32
|
|
adafruit_qtpy_esp32s2.build.variant=adafruit_qtpy_esp32s2
|
|
adafruit_qtpy_esp32s2.build.board=ADAFRUIT_QTPY_ESP32S2
|
|
|
|
adafruit_qtpy_esp32s2.build.cdc_on_boot=1
|
|
adafruit_qtpy_esp32s2.build.msc_on_boot=0
|
|
adafruit_qtpy_esp32s2.build.dfu_on_boot=0
|
|
adafruit_qtpy_esp32s2.build.f_cpu=240000000L
|
|
adafruit_qtpy_esp32s2.build.flash_size=4MB
|
|
adafruit_qtpy_esp32s2.build.flash_freq=80m
|
|
adafruit_qtpy_esp32s2.build.flash_mode=dio
|
|
adafruit_qtpy_esp32s2.build.boot=qio
|
|
adafruit_qtpy_esp32s2.build.partitions=default
|
|
adafruit_qtpy_esp32s2.build.defines=
|
|
|
|
adafruit_qtpy_esp32s2.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_qtpy_esp32s2.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_qtpy_esp32s2.menu.CDCOnBoot.default=Disabled
|
|
adafruit_qtpy_esp32s2.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_qtpy_esp32s2.menu.MSCOnBoot.default=Disabled
|
|
adafruit_qtpy_esp32s2.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
adafruit_qtpy_esp32s2.menu.MSCOnBoot.msc=Enabled
|
|
adafruit_qtpy_esp32s2.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
adafruit_qtpy_esp32s2.menu.DFUOnBoot.default=Disabled
|
|
adafruit_qtpy_esp32s2.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
adafruit_qtpy_esp32s2.menu.DFUOnBoot.dfu=Enabled
|
|
adafruit_qtpy_esp32s2.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
adafruit_qtpy_esp32s2.menu.UploadMode.cdc=Internal USB
|
|
adafruit_qtpy_esp32s2.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
adafruit_qtpy_esp32s2.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
adafruit_qtpy_esp32s2.menu.UploadMode.default=UART0
|
|
adafruit_qtpy_esp32s2.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
adafruit_qtpy_esp32s2.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
adafruit_qtpy_esp32s2.menu.PSRAM.enabled=Enabled
|
|
adafruit_qtpy_esp32s2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_qtpy_esp32s2.menu.PSRAM.disabled=Disabled
|
|
adafruit_qtpy_esp32s2.menu.PSRAM.disabled.build.defines=
|
|
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.tinyuf2=TinyUF2 4MB (1.3MB APP/960KB FATFS)
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-4MB
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.tinyuf2.upload.maximum_size=1441792
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.tinyuf2_noota=TinyUF2 4MB No OTA (2.7MB APP/960KB FATFS)
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-4MB-noota
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=2883584
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.default.build.partitions=default
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
adafruit_qtpy_esp32s2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
adafruit_qtpy_esp32s2.menu.CPUFreq.240=240MHz (WiFi)
|
|
adafruit_qtpy_esp32s2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_qtpy_esp32s2.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_qtpy_esp32s2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_qtpy_esp32s2.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_qtpy_esp32s2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_qtpy_esp32s2.menu.CPUFreq.40=40MHz
|
|
adafruit_qtpy_esp32s2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_qtpy_esp32s2.menu.CPUFreq.20=20MHz
|
|
adafruit_qtpy_esp32s2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_qtpy_esp32s2.menu.CPUFreq.10=10MHz
|
|
adafruit_qtpy_esp32s2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_qtpy_esp32s2.menu.FlashMode.qio=QIO
|
|
adafruit_qtpy_esp32s2.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_qtpy_esp32s2.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_qtpy_esp32s2.menu.FlashMode.dio=DIO
|
|
adafruit_qtpy_esp32s2.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_qtpy_esp32s2.menu.FlashMode.dio.build.boot=dio
|
|
|
|
adafruit_qtpy_esp32s2.menu.FlashFreq.80=80MHz
|
|
adafruit_qtpy_esp32s2.menu.FlashFreq.80.build.flash_freq=80m
|
|
adafruit_qtpy_esp32s2.menu.FlashFreq.40=40MHz
|
|
adafruit_qtpy_esp32s2.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
adafruit_qtpy_esp32s2.menu.FlashSize.4M=4MB (32Mb)
|
|
adafruit_qtpy_esp32s2.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
adafruit_qtpy_esp32s2.menu.UploadSpeed.921600=921600
|
|
adafruit_qtpy_esp32s2.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_qtpy_esp32s2.menu.UploadSpeed.115200=115200
|
|
adafruit_qtpy_esp32s2.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_qtpy_esp32s2.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_qtpy_esp32s2.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_qtpy_esp32s2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_qtpy_esp32s2.menu.UploadSpeed.230400=230400
|
|
adafruit_qtpy_esp32s2.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_qtpy_esp32s2.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_qtpy_esp32s2.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_qtpy_esp32s2.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_qtpy_esp32s2.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_qtpy_esp32s2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_qtpy_esp32s2.menu.DebugLevel.none=None
|
|
adafruit_qtpy_esp32s2.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_qtpy_esp32s2.menu.DebugLevel.error=Error
|
|
adafruit_qtpy_esp32s2.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_qtpy_esp32s2.menu.DebugLevel.warn=Warn
|
|
adafruit_qtpy_esp32s2.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_qtpy_esp32s2.menu.DebugLevel.info=Info
|
|
adafruit_qtpy_esp32s2.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_qtpy_esp32s2.menu.DebugLevel.debug=Debug
|
|
adafruit_qtpy_esp32s2.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_qtpy_esp32s2.menu.DebugLevel.verbose=Verbose
|
|
adafruit_qtpy_esp32s2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_qtpy_esp32s2.menu.EraseFlash.none=Disabled
|
|
adafruit_qtpy_esp32s2.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_qtpy_esp32s2.menu.EraseFlash.all=Enabled
|
|
adafruit_qtpy_esp32s2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_qtpy_esp32s2.menu.ZigbeeMode.default=Disabled
|
|
adafruit_qtpy_esp32s2.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_qtpy_esp32s2.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_qtpy_esp32s2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_qtpy_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_qtpy_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit QT Py ESP32-S3 No PSRAM
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.name=Adafruit QT Py ESP32-S3 No PSRAM
|
|
adafruit_qtpy_esp32s3_nopsram.vid.0=0x239A
|
|
adafruit_qtpy_esp32s3_nopsram.pid.0=0x8119
|
|
adafruit_qtpy_esp32s3_nopsram.vid.1=0x239A
|
|
adafruit_qtpy_esp32s3_nopsram.pid.1=0x0119
|
|
adafruit_qtpy_esp32s3_nopsram.vid.2=0x239A
|
|
adafruit_qtpy_esp32s3_nopsram.pid.2=0x811A
|
|
adafruit_qtpy_esp32s3_nopsram.upload_port.0.vid=0x239A
|
|
adafruit_qtpy_esp32s3_nopsram.upload_port.0.pid=0x8119
|
|
adafruit_qtpy_esp32s3_nopsram.upload_port.1.vid=0x239A
|
|
adafruit_qtpy_esp32s3_nopsram.upload_port.1.pid=0x0119
|
|
adafruit_qtpy_esp32s3_nopsram.upload_port.2.vid=0x239A
|
|
adafruit_qtpy_esp32s3_nopsram.upload_port.2.pid=0x811A
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.bootloader.tool=esptool_py
|
|
adafruit_qtpy_esp32s3_nopsram.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.upload.tool=esptool_py
|
|
adafruit_qtpy_esp32s3_nopsram.upload.tool.default=esptool_py
|
|
adafruit_qtpy_esp32s3_nopsram.upload.tool.network=esp_ota
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.upload.maximum_size=1310720
|
|
adafruit_qtpy_esp32s3_nopsram.upload.maximum_data_size=327680
|
|
adafruit_qtpy_esp32s3_nopsram.upload.flags=
|
|
adafruit_qtpy_esp32s3_nopsram.upload.extra_flags=
|
|
adafruit_qtpy_esp32s3_nopsram.upload.use_1200bps_touch=true
|
|
adafruit_qtpy_esp32s3_nopsram.upload.wait_for_upload_port=true
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.serial.disableDTR=false
|
|
adafruit_qtpy_esp32s3_nopsram.serial.disableRTS=false
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.build.tarch=xtensa
|
|
adafruit_qtpy_esp32s3_nopsram.build.bootloader_addr=0x0
|
|
adafruit_qtpy_esp32s3_nopsram.build.target=esp32s3
|
|
adafruit_qtpy_esp32s3_nopsram.build.mcu=esp32s3
|
|
adafruit_qtpy_esp32s3_nopsram.build.core=esp32
|
|
adafruit_qtpy_esp32s3_nopsram.build.variant=adafruit_qtpy_esp32s3_nopsram
|
|
adafruit_qtpy_esp32s3_nopsram.build.board=ADAFRUIT_QTPY_ESP32S3_NOPSRAM
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.build.usb_mode=0
|
|
adafruit_qtpy_esp32s3_nopsram.build.cdc_on_boot=1
|
|
adafruit_qtpy_esp32s3_nopsram.build.msc_on_boot=0
|
|
adafruit_qtpy_esp32s3_nopsram.build.dfu_on_boot=0
|
|
adafruit_qtpy_esp32s3_nopsram.build.f_cpu=240000000L
|
|
adafruit_qtpy_esp32s3_nopsram.build.flash_size=8MB
|
|
adafruit_qtpy_esp32s3_nopsram.build.flash_freq=80m
|
|
adafruit_qtpy_esp32s3_nopsram.build.flash_mode=dio
|
|
adafruit_qtpy_esp32s3_nopsram.build.boot=qio
|
|
adafruit_qtpy_esp32s3_nopsram.build.partitions=default
|
|
adafruit_qtpy_esp32s3_nopsram.build.defines=
|
|
adafruit_qtpy_esp32s3_nopsram.build.loop_core=
|
|
adafruit_qtpy_esp32s3_nopsram.build.event_core=
|
|
adafruit_qtpy_esp32s3_nopsram.build.flash_type=qio
|
|
adafruit_qtpy_esp32s3_nopsram.build.psram_type=qspi
|
|
adafruit_qtpy_esp32s3_nopsram.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.menu.LoopCore.1=Core 1
|
|
adafruit_qtpy_esp32s3_nopsram.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
adafruit_qtpy_esp32s3_nopsram.menu.LoopCore.0=Core 0
|
|
adafruit_qtpy_esp32s3_nopsram.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.menu.EventsCore.1=Core 1
|
|
adafruit_qtpy_esp32s3_nopsram.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
adafruit_qtpy_esp32s3_nopsram.menu.EventsCore.0=Core 0
|
|
adafruit_qtpy_esp32s3_nopsram.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
adafruit_qtpy_esp32s3_nopsram.menu.USBMode.default.build.usb_mode=0
|
|
adafruit_qtpy_esp32s3_nopsram.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
adafruit_qtpy_esp32s3_nopsram.menu.USBMode.hwcdc.build.usb_mode=1
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_qtpy_esp32s3_nopsram.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_qtpy_esp32s3_nopsram.menu.CDCOnBoot.default=Disabled
|
|
adafruit_qtpy_esp32s3_nopsram.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.menu.MSCOnBoot.default=Disabled
|
|
adafruit_qtpy_esp32s3_nopsram.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
adafruit_qtpy_esp32s3_nopsram.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
adafruit_qtpy_esp32s3_nopsram.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.menu.DFUOnBoot.default=Disabled
|
|
adafruit_qtpy_esp32s3_nopsram.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
adafruit_qtpy_esp32s3_nopsram.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
adafruit_qtpy_esp32s3_nopsram.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadMode.default=UART0 / Hardware CDC
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.menu.PartitionScheme.tinyuf2=TinyUF2 8MB (2MB APP/3.7MB FATFS)
|
|
adafruit_qtpy_esp32s3_nopsram.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_qtpy_esp32s3_nopsram.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-8MB
|
|
adafruit_qtpy_esp32s3_nopsram.menu.PartitionScheme.tinyuf2.upload.maximum_size=2097152
|
|
adafruit_qtpy_esp32s3_nopsram.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_qtpy_esp32s3_nopsram.menu.PartitionScheme.tinyuf2_noota=TinyUF2 8MB No OTA (4MB APP/3.7MB FATFS)
|
|
adafruit_qtpy_esp32s3_nopsram.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_qtpy_esp32s3_nopsram.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-8MB-noota
|
|
adafruit_qtpy_esp32s3_nopsram.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=4194304
|
|
adafruit_qtpy_esp32s3_nopsram.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_qtpy_esp32s3_nopsram.menu.PartitionScheme.default_8MB=Default (3MB APP/1.5MB SPIFFS)
|
|
adafruit_qtpy_esp32s3_nopsram.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
adafruit_qtpy_esp32s3_nopsram.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.menu.CPUFreq.240=240MHz (WiFi)
|
|
adafruit_qtpy_esp32s3_nopsram.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_qtpy_esp32s3_nopsram.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_qtpy_esp32s3_nopsram.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_qtpy_esp32s3_nopsram.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_qtpy_esp32s3_nopsram.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_qtpy_esp32s3_nopsram.menu.CPUFreq.40=40MHz
|
|
adafruit_qtpy_esp32s3_nopsram.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_qtpy_esp32s3_nopsram.menu.CPUFreq.20=20MHz
|
|
adafruit_qtpy_esp32s3_nopsram.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_qtpy_esp32s3_nopsram.menu.CPUFreq.10=10MHz
|
|
adafruit_qtpy_esp32s3_nopsram.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.qio=QIO 80MHz
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.qio.build.boot_freq=80m
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.qio.build.flash_freq=80m
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.qio120=QIO 120MHz
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.qio120.build.flash_mode=dio
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.qio120.build.boot=qio
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.qio120.build.boot_freq=120m
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.qio120.build.flash_freq=80m
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.dio=DIO 80MHz
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.dio.build.boot=dio
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.dio.build.boot_freq=80m
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.dio.build.flash_freq=80m
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.opi=OPI 80MHz
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.opi.build.flash_mode=dout
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.opi.build.boot=opi
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.opi.build.boot_freq=80m
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashSize.8M=8MB (64Mb)
|
|
adafruit_qtpy_esp32s3_nopsram.menu.FlashSize.8M.build.flash_size=8MB
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadSpeed.921600=921600
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadSpeed.115200=115200
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadSpeed.230400=230400
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_qtpy_esp32s3_nopsram.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.menu.DebugLevel.none=None
|
|
adafruit_qtpy_esp32s3_nopsram.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_qtpy_esp32s3_nopsram.menu.DebugLevel.error=Error
|
|
adafruit_qtpy_esp32s3_nopsram.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_qtpy_esp32s3_nopsram.menu.DebugLevel.warn=Warn
|
|
adafruit_qtpy_esp32s3_nopsram.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_qtpy_esp32s3_nopsram.menu.DebugLevel.info=Info
|
|
adafruit_qtpy_esp32s3_nopsram.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_qtpy_esp32s3_nopsram.menu.DebugLevel.debug=Debug
|
|
adafruit_qtpy_esp32s3_nopsram.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_qtpy_esp32s3_nopsram.menu.DebugLevel.verbose=Verbose
|
|
adafruit_qtpy_esp32s3_nopsram.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.menu.EraseFlash.none=Disabled
|
|
adafruit_qtpy_esp32s3_nopsram.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_qtpy_esp32s3_nopsram.menu.EraseFlash.all=Enabled
|
|
adafruit_qtpy_esp32s3_nopsram.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_qtpy_esp32s3_nopsram.menu.ZigbeeMode.default=Disabled
|
|
adafruit_qtpy_esp32s3_nopsram.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_qtpy_esp32s3_nopsram.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_qtpy_esp32s3_nopsram.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_qtpy_esp32s3_nopsram.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_qtpy_esp32s3_nopsram.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit QT Py ESP32-S3 (4M Flash 2M PSRAM)
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.name=Adafruit QT Py ESP32-S3 (4M Flash 2M PSRAM)
|
|
adafruit_qtpy_esp32s3_n4r2.vid.0=0x239A
|
|
adafruit_qtpy_esp32s3_n4r2.pid.0=0x8143
|
|
adafruit_qtpy_esp32s3_n4r2.vid.1=0x239A
|
|
adafruit_qtpy_esp32s3_n4r2.pid.1=0x0143
|
|
adafruit_qtpy_esp32s3_n4r2.vid.2=0x239A
|
|
adafruit_qtpy_esp32s3_n4r2.pid.2=0x8144
|
|
adafruit_qtpy_esp32s3_n4r2.upload_port.0.vid=0x239A
|
|
adafruit_qtpy_esp32s3_n4r2.upload_port.0.pid=0x8143
|
|
adafruit_qtpy_esp32s3_n4r2.upload_port.1.vid=0x239A
|
|
adafruit_qtpy_esp32s3_n4r2.upload_port.1.pid=0x0143
|
|
adafruit_qtpy_esp32s3_n4r2.upload_port.2.vid=0x239A
|
|
adafruit_qtpy_esp32s3_n4r2.upload_port.2.pid=0x8144
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.bootloader.tool=esptool_py
|
|
adafruit_qtpy_esp32s3_n4r2.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.upload.tool=esptool_py
|
|
adafruit_qtpy_esp32s3_n4r2.upload.tool.default=esptool_py
|
|
adafruit_qtpy_esp32s3_n4r2.upload.tool.network=esp_ota
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.upload.maximum_size=1310720
|
|
adafruit_qtpy_esp32s3_n4r2.upload.maximum_data_size=327680
|
|
adafruit_qtpy_esp32s3_n4r2.upload.flags=
|
|
adafruit_qtpy_esp32s3_n4r2.upload.extra_flags=
|
|
adafruit_qtpy_esp32s3_n4r2.upload.use_1200bps_touch=true
|
|
adafruit_qtpy_esp32s3_n4r2.upload.wait_for_upload_port=true
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.serial.disableDTR=false
|
|
adafruit_qtpy_esp32s3_n4r2.serial.disableRTS=false
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.build.tarch=xtensa
|
|
adafruit_qtpy_esp32s3_n4r2.build.bootloader_addr=0x0
|
|
adafruit_qtpy_esp32s3_n4r2.build.target=esp32s3
|
|
adafruit_qtpy_esp32s3_n4r2.build.mcu=esp32s3
|
|
adafruit_qtpy_esp32s3_n4r2.build.core=esp32
|
|
adafruit_qtpy_esp32s3_n4r2.build.variant=adafruit_qtpy_esp32s3_n4r2
|
|
adafruit_qtpy_esp32s3_n4r2.build.board=ADAFRUIT_QTPY_ESP32S3_N4R2
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.build.usb_mode=0
|
|
adafruit_qtpy_esp32s3_n4r2.build.cdc_on_boot=1
|
|
adafruit_qtpy_esp32s3_n4r2.build.msc_on_boot=0
|
|
adafruit_qtpy_esp32s3_n4r2.build.dfu_on_boot=0
|
|
adafruit_qtpy_esp32s3_n4r2.build.f_cpu=240000000L
|
|
adafruit_qtpy_esp32s3_n4r2.build.flash_size=4MB
|
|
adafruit_qtpy_esp32s3_n4r2.build.flash_freq=80m
|
|
adafruit_qtpy_esp32s3_n4r2.build.flash_mode=dio
|
|
adafruit_qtpy_esp32s3_n4r2.build.boot=qio
|
|
adafruit_qtpy_esp32s3_n4r2.build.partitions=default
|
|
adafruit_qtpy_esp32s3_n4r2.build.defines=
|
|
adafruit_qtpy_esp32s3_n4r2.build.loop_core=
|
|
adafruit_qtpy_esp32s3_n4r2.build.event_core=
|
|
adafruit_qtpy_esp32s3_n4r2.build.flash_type=qio
|
|
adafruit_qtpy_esp32s3_n4r2.build.psram_type=qspi
|
|
adafruit_qtpy_esp32s3_n4r2.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.menu.LoopCore.1=Core 1
|
|
adafruit_qtpy_esp32s3_n4r2.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
adafruit_qtpy_esp32s3_n4r2.menu.LoopCore.0=Core 0
|
|
adafruit_qtpy_esp32s3_n4r2.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.menu.EventsCore.1=Core 1
|
|
adafruit_qtpy_esp32s3_n4r2.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
adafruit_qtpy_esp32s3_n4r2.menu.EventsCore.0=Core 0
|
|
adafruit_qtpy_esp32s3_n4r2.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.USBMode.default.build.usb_mode=0
|
|
adafruit_qtpy_esp32s3_n4r2.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
adafruit_qtpy_esp32s3_n4r2.menu.USBMode.hwcdc.build.usb_mode=1
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_qtpy_esp32s3_n4r2.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_qtpy_esp32s3_n4r2.menu.CDCOnBoot.default=Disabled
|
|
adafruit_qtpy_esp32s3_n4r2.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.menu.MSCOnBoot.default=Disabled
|
|
adafruit_qtpy_esp32s3_n4r2.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
adafruit_qtpy_esp32s3_n4r2.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.menu.DFUOnBoot.default=Disabled
|
|
adafruit_qtpy_esp32s3_n4r2.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
adafruit_qtpy_esp32s3_n4r2.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadMode.default=UART0 / Hardware CDC
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PSRAM.enabled=QSPI PSRAM
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PSRAM.enabled.build.psram_type=qspi
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PSRAM.disabled=Disabled
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PSRAM.disabled.build.defines=
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PSRAM.disabled.build.psram_type=qspi
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PSRAM.opi=OPI PSRAM
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.tinyuf2=TinyUF2 4MB (1.3MB APP/960KB FATFS)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-4MB
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.tinyuf2.upload.maximum_size=1441792
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.tinyuf2_noota=TinyUF2 4MB No OTA (2.7MB APP/960KB FATFS)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-4MB-noota
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=2883584
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.default.build.partitions=default
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
adafruit_qtpy_esp32s3_n4r2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.menu.CPUFreq.240=240MHz (WiFi)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_qtpy_esp32s3_n4r2.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_qtpy_esp32s3_n4r2.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_qtpy_esp32s3_n4r2.menu.CPUFreq.40=40MHz
|
|
adafruit_qtpy_esp32s3_n4r2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_qtpy_esp32s3_n4r2.menu.CPUFreq.20=20MHz
|
|
adafruit_qtpy_esp32s3_n4r2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_qtpy_esp32s3_n4r2.menu.CPUFreq.10=10MHz
|
|
adafruit_qtpy_esp32s3_n4r2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.qio=QIO 80MHz
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.qio.build.boot_freq=80m
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.qio.build.flash_freq=80m
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.qio120=QIO 120MHz
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.qio120.build.flash_mode=dio
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.qio120.build.boot=qio
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.qio120.build.boot_freq=120m
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.qio120.build.flash_freq=80m
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.dio=DIO 80MHz
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.dio.build.boot=dio
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.dio.build.boot_freq=80m
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.dio.build.flash_freq=80m
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.opi=OPI 80MHz
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.opi.build.flash_mode=dout
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.opi.build.boot=opi
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.opi.build.boot_freq=80m
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashSize.4M=4MB (32Mb)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadSpeed.921600=921600
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadSpeed.115200=115200
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadSpeed.230400=230400
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_qtpy_esp32s3_n4r2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.menu.DebugLevel.none=None
|
|
adafruit_qtpy_esp32s3_n4r2.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_qtpy_esp32s3_n4r2.menu.DebugLevel.error=Error
|
|
adafruit_qtpy_esp32s3_n4r2.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_qtpy_esp32s3_n4r2.menu.DebugLevel.warn=Warn
|
|
adafruit_qtpy_esp32s3_n4r2.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_qtpy_esp32s3_n4r2.menu.DebugLevel.info=Info
|
|
adafruit_qtpy_esp32s3_n4r2.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_qtpy_esp32s3_n4r2.menu.DebugLevel.debug=Debug
|
|
adafruit_qtpy_esp32s3_n4r2.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_qtpy_esp32s3_n4r2.menu.DebugLevel.verbose=Verbose
|
|
adafruit_qtpy_esp32s3_n4r2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.menu.EraseFlash.none=Disabled
|
|
adafruit_qtpy_esp32s3_n4r2.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_qtpy_esp32s3_n4r2.menu.EraseFlash.all=Enabled
|
|
adafruit_qtpy_esp32s3_n4r2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_qtpy_esp32s3_n4r2.menu.ZigbeeMode.default=Disabled
|
|
adafruit_qtpy_esp32s3_n4r2.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_qtpy_esp32s3_n4r2.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_qtpy_esp32s3_n4r2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_qtpy_esp32s3_n4r2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_qtpy_esp32s3_n4r2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit ItsyBitsy ESP32
|
|
|
|
adafruit_itsybitsy_esp32.name=Adafruit ItsyBitsy ESP32
|
|
|
|
adafruit_itsybitsy_esp32.bootloader.tool=esptool_py
|
|
adafruit_itsybitsy_esp32.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_itsybitsy_esp32.upload.tool=esptool_py
|
|
adafruit_itsybitsy_esp32.upload.tool.default=esptool_py
|
|
adafruit_itsybitsy_esp32.upload.tool.network=esp_ota
|
|
|
|
adafruit_itsybitsy_esp32.upload.maximum_size=1310720
|
|
adafruit_itsybitsy_esp32.upload.maximum_data_size=327680
|
|
adafruit_itsybitsy_esp32.upload.flags=
|
|
adafruit_itsybitsy_esp32.upload.extra_flags=
|
|
|
|
adafruit_itsybitsy_esp32.serial.disableDTR=true
|
|
adafruit_itsybitsy_esp32.serial.disableRTS=true
|
|
|
|
adafruit_itsybitsy_esp32.build.tarch=xtensa
|
|
adafruit_itsybitsy_esp32.build.bootloader_addr=0x1000
|
|
adafruit_itsybitsy_esp32.build.target=esp32
|
|
adafruit_itsybitsy_esp32.build.mcu=esp32
|
|
adafruit_itsybitsy_esp32.build.core=esp32
|
|
adafruit_itsybitsy_esp32.build.variant=adafruit_itsybitsy_esp32
|
|
adafruit_itsybitsy_esp32.build.board=ADAFRUIT_ITSYBITSY_ESP32
|
|
|
|
adafruit_itsybitsy_esp32.build.f_cpu=240000000L
|
|
adafruit_itsybitsy_esp32.build.flash_size=8MB
|
|
adafruit_itsybitsy_esp32.build.flash_freq=80m
|
|
adafruit_itsybitsy_esp32.build.flash_mode=dio
|
|
adafruit_itsybitsy_esp32.build.boot=dio
|
|
adafruit_itsybitsy_esp32.build.partitions=default
|
|
adafruit_itsybitsy_esp32.build.defines=
|
|
adafruit_itsybitsy_esp32.build.loop_core=
|
|
adafruit_itsybitsy_esp32.build.event_core=
|
|
|
|
adafruit_itsybitsy_esp32.menu.LoopCore.1=Core 1
|
|
adafruit_itsybitsy_esp32.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
adafruit_itsybitsy_esp32.menu.LoopCore.0=Core 0
|
|
adafruit_itsybitsy_esp32.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
adafruit_itsybitsy_esp32.menu.EventsCore.1=Core 1
|
|
adafruit_itsybitsy_esp32.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
adafruit_itsybitsy_esp32.menu.EventsCore.0=Core 0
|
|
adafruit_itsybitsy_esp32.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
adafruit_itsybitsy_esp32.menu.PSRAM.enabled=Enabled
|
|
adafruit_itsybitsy_esp32.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
adafruit_itsybitsy_esp32.menu.PSRAM.disabled=Disabled
|
|
adafruit_itsybitsy_esp32.menu.PSRAM.disabled.build.defines=
|
|
|
|
adafruit_itsybitsy_esp32.menu.PartitionScheme.default_8MB=Default (3MB APP/1.5MB SPIFFS)
|
|
adafruit_itsybitsy_esp32.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
adafruit_itsybitsy_esp32.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
|
|
adafruit_itsybitsy_esp32.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
adafruit_itsybitsy_esp32.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_itsybitsy_esp32.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
adafruit_itsybitsy_esp32.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_itsybitsy_esp32.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
adafruit_itsybitsy_esp32.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_itsybitsy_esp32.menu.CPUFreq.40=40MHz
|
|
adafruit_itsybitsy_esp32.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_itsybitsy_esp32.menu.CPUFreq.20=20MHz
|
|
adafruit_itsybitsy_esp32.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_itsybitsy_esp32.menu.CPUFreq.10=10MHz
|
|
adafruit_itsybitsy_esp32.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_itsybitsy_esp32.menu.FlashFreq.80=80MHz
|
|
adafruit_itsybitsy_esp32.menu.FlashFreq.80.build.flash_freq=80m
|
|
adafruit_itsybitsy_esp32.menu.FlashFreq.40=40MHz
|
|
adafruit_itsybitsy_esp32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
adafruit_itsybitsy_esp32.menu.FlashSize.8M=8MB (64Mb)
|
|
adafruit_itsybitsy_esp32.menu.FlashSize.8M.build.flash_size=8MB
|
|
|
|
adafruit_itsybitsy_esp32.menu.UploadSpeed.921600=921600
|
|
adafruit_itsybitsy_esp32.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_itsybitsy_esp32.menu.UploadSpeed.115200=115200
|
|
adafruit_itsybitsy_esp32.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_itsybitsy_esp32.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_itsybitsy_esp32.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_itsybitsy_esp32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_itsybitsy_esp32.menu.UploadSpeed.230400=230400
|
|
adafruit_itsybitsy_esp32.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_itsybitsy_esp32.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_itsybitsy_esp32.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_itsybitsy_esp32.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_itsybitsy_esp32.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_itsybitsy_esp32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_itsybitsy_esp32.menu.DebugLevel.none=None
|
|
adafruit_itsybitsy_esp32.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_itsybitsy_esp32.menu.DebugLevel.error=Error
|
|
adafruit_itsybitsy_esp32.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_itsybitsy_esp32.menu.DebugLevel.warn=Warn
|
|
adafruit_itsybitsy_esp32.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_itsybitsy_esp32.menu.DebugLevel.info=Info
|
|
adafruit_itsybitsy_esp32.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_itsybitsy_esp32.menu.DebugLevel.debug=Debug
|
|
adafruit_itsybitsy_esp32.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_itsybitsy_esp32.menu.DebugLevel.verbose=Verbose
|
|
adafruit_itsybitsy_esp32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_itsybitsy_esp32.menu.EraseFlash.none=Disabled
|
|
adafruit_itsybitsy_esp32.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_itsybitsy_esp32.menu.EraseFlash.all=Enabled
|
|
adafruit_itsybitsy_esp32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_itsybitsy_esp32.menu.ZigbeeMode.default=Disabled
|
|
adafruit_itsybitsy_esp32.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_itsybitsy_esp32.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_itsybitsy_esp32.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_itsybitsy_esp32.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_itsybitsy_esp32.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit MatrixPortal ESP32-S3
|
|
|
|
adafruit_matrixportal_esp32s3.name=Adafruit MatrixPortal ESP32-S3
|
|
adafruit_matrixportal_esp32s3.vid.0=0x239A
|
|
adafruit_matrixportal_esp32s3.pid.0=0x8125
|
|
adafruit_matrixportal_esp32s3.vid.1=0x239A
|
|
adafruit_matrixportal_esp32s3.pid.1=0x0125
|
|
adafruit_matrixportal_esp32s3.vid.2=0x239A
|
|
adafruit_matrixportal_esp32s3.pid.2=0x8126
|
|
adafruit_matrixportal_esp32s3.upload_port.0.vid=0x239A
|
|
adafruit_matrixportal_esp32s3.upload_port.0.pid=0x8125
|
|
adafruit_matrixportal_esp32s3.upload_port.1.vid=0x239A
|
|
adafruit_matrixportal_esp32s3.upload_port.1.pid=0x0125
|
|
adafruit_matrixportal_esp32s3.upload_port.2.vid=0x239A
|
|
adafruit_matrixportal_esp32s3.upload_port.2.pid=0x8126
|
|
|
|
adafruit_matrixportal_esp32s3.bootloader.tool=esptool_py
|
|
adafruit_matrixportal_esp32s3.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_matrixportal_esp32s3.upload.tool=esptool_py
|
|
adafruit_matrixportal_esp32s3.upload.tool.default=esptool_py
|
|
adafruit_matrixportal_esp32s3.upload.tool.network=esp_ota
|
|
|
|
adafruit_matrixportal_esp32s3.upload.maximum_size=1310720
|
|
adafruit_matrixportal_esp32s3.upload.maximum_data_size=327680
|
|
adafruit_matrixportal_esp32s3.upload.flags=
|
|
adafruit_matrixportal_esp32s3.upload.extra_flags=
|
|
adafruit_matrixportal_esp32s3.upload.use_1200bps_touch=true
|
|
adafruit_matrixportal_esp32s3.upload.wait_for_upload_port=true
|
|
|
|
adafruit_matrixportal_esp32s3.serial.disableDTR=false
|
|
adafruit_matrixportal_esp32s3.serial.disableRTS=false
|
|
|
|
adafruit_matrixportal_esp32s3.build.tarch=xtensa
|
|
adafruit_matrixportal_esp32s3.build.bootloader_addr=0x0
|
|
adafruit_matrixportal_esp32s3.build.target=esp32s3
|
|
adafruit_matrixportal_esp32s3.build.mcu=esp32s3
|
|
adafruit_matrixportal_esp32s3.build.core=esp32
|
|
adafruit_matrixportal_esp32s3.build.variant=adafruit_matrixportal_esp32s3
|
|
adafruit_matrixportal_esp32s3.build.board=ADAFRUIT_MATRIXPORTAL_ESP32S3
|
|
|
|
adafruit_matrixportal_esp32s3.build.usb_mode=0
|
|
adafruit_matrixportal_esp32s3.build.cdc_on_boot=1
|
|
adafruit_matrixportal_esp32s3.build.msc_on_boot=0
|
|
adafruit_matrixportal_esp32s3.build.dfu_on_boot=0
|
|
adafruit_matrixportal_esp32s3.build.f_cpu=240000000L
|
|
adafruit_matrixportal_esp32s3.build.flash_size=8MB
|
|
adafruit_matrixportal_esp32s3.build.flash_freq=80m
|
|
adafruit_matrixportal_esp32s3.build.flash_mode=dio
|
|
adafruit_matrixportal_esp32s3.build.boot=qio
|
|
adafruit_matrixportal_esp32s3.build.partitions=default
|
|
adafruit_matrixportal_esp32s3.build.defines=
|
|
adafruit_matrixportal_esp32s3.build.loop_core=
|
|
adafruit_matrixportal_esp32s3.build.event_core=
|
|
adafruit_matrixportal_esp32s3.build.flash_type=qio
|
|
adafruit_matrixportal_esp32s3.build.psram_type=qspi
|
|
adafruit_matrixportal_esp32s3.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
adafruit_matrixportal_esp32s3.menu.LoopCore.1=Core 1
|
|
adafruit_matrixportal_esp32s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
adafruit_matrixportal_esp32s3.menu.LoopCore.0=Core 0
|
|
adafruit_matrixportal_esp32s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
adafruit_matrixportal_esp32s3.menu.EventsCore.1=Core 1
|
|
adafruit_matrixportal_esp32s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
adafruit_matrixportal_esp32s3.menu.EventsCore.0=Core 0
|
|
adafruit_matrixportal_esp32s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
adafruit_matrixportal_esp32s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
adafruit_matrixportal_esp32s3.menu.USBMode.default.build.usb_mode=0
|
|
adafruit_matrixportal_esp32s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
adafruit_matrixportal_esp32s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
|
|
adafruit_matrixportal_esp32s3.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_matrixportal_esp32s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_matrixportal_esp32s3.menu.CDCOnBoot.default=Disabled
|
|
adafruit_matrixportal_esp32s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_matrixportal_esp32s3.menu.MSCOnBoot.default=Disabled
|
|
adafruit_matrixportal_esp32s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
adafruit_matrixportal_esp32s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
adafruit_matrixportal_esp32s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
adafruit_matrixportal_esp32s3.menu.DFUOnBoot.default=Disabled
|
|
adafruit_matrixportal_esp32s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
adafruit_matrixportal_esp32s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
adafruit_matrixportal_esp32s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
adafruit_matrixportal_esp32s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
adafruit_matrixportal_esp32s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
adafruit_matrixportal_esp32s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
adafruit_matrixportal_esp32s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
adafruit_matrixportal_esp32s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
adafruit_matrixportal_esp32s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
adafruit_matrixportal_esp32s3.menu.PSRAM.enabled=QSPI PSRAM
|
|
adafruit_matrixportal_esp32s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_matrixportal_esp32s3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
adafruit_matrixportal_esp32s3.menu.PSRAM.disabled=Disabled
|
|
adafruit_matrixportal_esp32s3.menu.PSRAM.disabled.build.defines=
|
|
adafruit_matrixportal_esp32s3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
adafruit_matrixportal_esp32s3.menu.PSRAM.opi=OPI PSRAM
|
|
adafruit_matrixportal_esp32s3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_matrixportal_esp32s3.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
adafruit_matrixportal_esp32s3.menu.PartitionScheme.tinyuf2=TinyUF2 8MB (2MB APP/3.7MB FATFS)
|
|
adafruit_matrixportal_esp32s3.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_matrixportal_esp32s3.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-8MB
|
|
adafruit_matrixportal_esp32s3.menu.PartitionScheme.tinyuf2.upload.maximum_size=2097152
|
|
adafruit_matrixportal_esp32s3.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_matrixportal_esp32s3.menu.PartitionScheme.tinyuf2_noota=TinyUF2 8MB No OTA (4MB APP/3.7MB FATFS)
|
|
adafruit_matrixportal_esp32s3.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_matrixportal_esp32s3.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-8MB-noota
|
|
adafruit_matrixportal_esp32s3.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=4194304
|
|
adafruit_matrixportal_esp32s3.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_matrixportal_esp32s3.menu.PartitionScheme.default_8MB=Default (3MB APP/1.5MB SPIFFS)
|
|
adafruit_matrixportal_esp32s3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
adafruit_matrixportal_esp32s3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
|
|
adafruit_matrixportal_esp32s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
adafruit_matrixportal_esp32s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_matrixportal_esp32s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_matrixportal_esp32s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_matrixportal_esp32s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_matrixportal_esp32s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_matrixportal_esp32s3.menu.CPUFreq.40=40MHz
|
|
adafruit_matrixportal_esp32s3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_matrixportal_esp32s3.menu.CPUFreq.20=20MHz
|
|
adafruit_matrixportal_esp32s3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_matrixportal_esp32s3.menu.CPUFreq.10=10MHz
|
|
adafruit_matrixportal_esp32s3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.qio=QIO 80MHz
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.qio.build.boot_freq=80m
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.qio.build.flash_freq=80m
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.qio120=QIO 120MHz
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.qio120.build.boot=qio
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.dio=DIO 80MHz
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.dio.build.boot=dio
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.dio.build.boot_freq=80m
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.dio.build.flash_freq=80m
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.opi=OPI 80MHz
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.opi.build.flash_mode=dout
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.opi.build.boot=opi
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.opi.build.boot_freq=80m
|
|
adafruit_matrixportal_esp32s3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
adafruit_matrixportal_esp32s3.menu.FlashSize.8M=8MB (64Mb)
|
|
adafruit_matrixportal_esp32s3.menu.FlashSize.8M.build.flash_size=8MB
|
|
|
|
adafruit_matrixportal_esp32s3.menu.UploadSpeed.921600=921600
|
|
adafruit_matrixportal_esp32s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_matrixportal_esp32s3.menu.UploadSpeed.115200=115200
|
|
adafruit_matrixportal_esp32s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_matrixportal_esp32s3.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_matrixportal_esp32s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_matrixportal_esp32s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_matrixportal_esp32s3.menu.UploadSpeed.230400=230400
|
|
adafruit_matrixportal_esp32s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_matrixportal_esp32s3.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_matrixportal_esp32s3.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_matrixportal_esp32s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_matrixportal_esp32s3.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_matrixportal_esp32s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_matrixportal_esp32s3.menu.DebugLevel.none=None
|
|
adafruit_matrixportal_esp32s3.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_matrixportal_esp32s3.menu.DebugLevel.error=Error
|
|
adafruit_matrixportal_esp32s3.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_matrixportal_esp32s3.menu.DebugLevel.warn=Warn
|
|
adafruit_matrixportal_esp32s3.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_matrixportal_esp32s3.menu.DebugLevel.info=Info
|
|
adafruit_matrixportal_esp32s3.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_matrixportal_esp32s3.menu.DebugLevel.debug=Debug
|
|
adafruit_matrixportal_esp32s3.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_matrixportal_esp32s3.menu.DebugLevel.verbose=Verbose
|
|
adafruit_matrixportal_esp32s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_matrixportal_esp32s3.menu.EraseFlash.none=Disabled
|
|
adafruit_matrixportal_esp32s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_matrixportal_esp32s3.menu.EraseFlash.all=Enabled
|
|
adafruit_matrixportal_esp32s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_matrixportal_esp32s3.menu.ZigbeeMode.default=Disabled
|
|
adafruit_matrixportal_esp32s3.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_matrixportal_esp32s3.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_matrixportal_esp32s3.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_matrixportal_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_matrixportal_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit pyCamera S3
|
|
|
|
adafruit_camera_esp32s3.name=Adafruit pyCamera S3
|
|
adafruit_camera_esp32s3.vid.0=0x239A
|
|
adafruit_camera_esp32s3.pid.0=0x0117
|
|
adafruit_camera_esp32s3.vid.1=0x239A
|
|
adafruit_camera_esp32s3.pid.1=0x8117
|
|
adafruit_camera_esp32s3.vid.2=0x239A
|
|
adafruit_camera_esp32s3.pid.2=0x8118
|
|
adafruit_camera_esp32s3.upload_port.0.vid=0x239A
|
|
adafruit_camera_esp32s3.upload_port.0.pid=0x0117
|
|
adafruit_camera_esp32s3.upload_port.1.vid=0x239A
|
|
adafruit_camera_esp32s3.upload_port.1.pid=0x8117
|
|
adafruit_camera_esp32s3.upload_port.2.vid=0x239A
|
|
adafruit_camera_esp32s3.upload_port.2.pid=0x8118
|
|
|
|
adafruit_camera_esp32s3.bootloader.tool=esptool_py
|
|
adafruit_camera_esp32s3.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_camera_esp32s3.upload.tool=esptool_py
|
|
adafruit_camera_esp32s3.upload.tool.default=esptool_py
|
|
adafruit_camera_esp32s3.upload.tool.network=esp_ota
|
|
|
|
adafruit_camera_esp32s3.upload.maximum_size=1310720
|
|
adafruit_camera_esp32s3.upload.maximum_data_size=327680
|
|
adafruit_camera_esp32s3.upload.flags=
|
|
adafruit_camera_esp32s3.upload.extra_flags=
|
|
adafruit_camera_esp32s3.upload.use_1200bps_touch=true
|
|
adafruit_camera_esp32s3.upload.wait_for_upload_port=true
|
|
|
|
adafruit_camera_esp32s3.serial.disableDTR=false
|
|
adafruit_camera_esp32s3.serial.disableRTS=false
|
|
|
|
adafruit_camera_esp32s3.build.tarch=xtensa
|
|
adafruit_camera_esp32s3.build.bootloader_addr=0x0
|
|
adafruit_camera_esp32s3.build.target=esp32s3
|
|
adafruit_camera_esp32s3.build.mcu=esp32s3
|
|
adafruit_camera_esp32s3.build.core=esp32
|
|
adafruit_camera_esp32s3.build.variant=adafruit_camera_esp32s3
|
|
adafruit_camera_esp32s3.build.board=ADAFRUIT_CAMERA_ESP32S3
|
|
|
|
adafruit_camera_esp32s3.build.usb_mode=0
|
|
adafruit_camera_esp32s3.build.cdc_on_boot=1
|
|
adafruit_camera_esp32s3.build.msc_on_boot=0
|
|
adafruit_camera_esp32s3.build.dfu_on_boot=0
|
|
adafruit_camera_esp32s3.build.f_cpu=240000000L
|
|
adafruit_camera_esp32s3.build.flash_size=4MB
|
|
adafruit_camera_esp32s3.build.flash_freq=80m
|
|
adafruit_camera_esp32s3.build.flash_mode=dio
|
|
adafruit_camera_esp32s3.build.boot=qio
|
|
adafruit_camera_esp32s3.build.partitions=default
|
|
adafruit_camera_esp32s3.build.defines=
|
|
adafruit_camera_esp32s3.build.loop_core=
|
|
adafruit_camera_esp32s3.build.event_core=
|
|
adafruit_camera_esp32s3.build.flash_type=qio
|
|
adafruit_camera_esp32s3.build.psram_type=qspi
|
|
adafruit_camera_esp32s3.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
adafruit_camera_esp32s3.menu.LoopCore.1=Core 1
|
|
adafruit_camera_esp32s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
adafruit_camera_esp32s3.menu.LoopCore.0=Core 0
|
|
adafruit_camera_esp32s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
adafruit_camera_esp32s3.menu.EventsCore.1=Core 1
|
|
adafruit_camera_esp32s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
adafruit_camera_esp32s3.menu.EventsCore.0=Core 0
|
|
adafruit_camera_esp32s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
adafruit_camera_esp32s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
adafruit_camera_esp32s3.menu.USBMode.default.build.usb_mode=0
|
|
adafruit_camera_esp32s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
adafruit_camera_esp32s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
|
|
adafruit_camera_esp32s3.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_camera_esp32s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_camera_esp32s3.menu.CDCOnBoot.default=Disabled
|
|
adafruit_camera_esp32s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_camera_esp32s3.menu.MSCOnBoot.default=Disabled
|
|
adafruit_camera_esp32s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
adafruit_camera_esp32s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
adafruit_camera_esp32s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
adafruit_camera_esp32s3.menu.DFUOnBoot.default=Disabled
|
|
adafruit_camera_esp32s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
adafruit_camera_esp32s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
adafruit_camera_esp32s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
adafruit_camera_esp32s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
adafruit_camera_esp32s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
adafruit_camera_esp32s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
adafruit_camera_esp32s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
adafruit_camera_esp32s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
adafruit_camera_esp32s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
adafruit_camera_esp32s3.menu.PSRAM.enabled=QSPI PSRAM
|
|
adafruit_camera_esp32s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_camera_esp32s3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
adafruit_camera_esp32s3.menu.PSRAM.disabled=Disabled
|
|
adafruit_camera_esp32s3.menu.PSRAM.disabled.build.defines=
|
|
adafruit_camera_esp32s3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
adafruit_camera_esp32s3.menu.PSRAM.opi=OPI PSRAM
|
|
adafruit_camera_esp32s3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_camera_esp32s3.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.tinyuf2_noota=TinyUF2 4MB No OTA (2.7MB APP/960KB FATFS)
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-4MB-noota
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=2883584
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.tinyuf2=TinyUF2 4MB (1.3MB APP/960KB FATFS)
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-4MB
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.tinyuf2.upload.maximum_size=1441792
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.default.build.partitions=default
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
adafruit_camera_esp32s3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
adafruit_camera_esp32s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
adafruit_camera_esp32s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_camera_esp32s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_camera_esp32s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_camera_esp32s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_camera_esp32s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_camera_esp32s3.menu.CPUFreq.40=40MHz
|
|
adafruit_camera_esp32s3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_camera_esp32s3.menu.CPUFreq.20=20MHz
|
|
adafruit_camera_esp32s3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_camera_esp32s3.menu.CPUFreq.10=10MHz
|
|
adafruit_camera_esp32s3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_camera_esp32s3.menu.FlashMode.qio=QIO 80MHz
|
|
adafruit_camera_esp32s3.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_camera_esp32s3.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_camera_esp32s3.menu.FlashMode.qio.build.boot_freq=80m
|
|
adafruit_camera_esp32s3.menu.FlashMode.qio.build.flash_freq=80m
|
|
adafruit_camera_esp32s3.menu.FlashMode.qio120=QIO 120MHz
|
|
adafruit_camera_esp32s3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
adafruit_camera_esp32s3.menu.FlashMode.qio120.build.boot=qio
|
|
adafruit_camera_esp32s3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
adafruit_camera_esp32s3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
adafruit_camera_esp32s3.menu.FlashMode.dio=DIO 80MHz
|
|
adafruit_camera_esp32s3.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_camera_esp32s3.menu.FlashMode.dio.build.boot=dio
|
|
adafruit_camera_esp32s3.menu.FlashMode.dio.build.boot_freq=80m
|
|
adafruit_camera_esp32s3.menu.FlashMode.dio.build.flash_freq=80m
|
|
adafruit_camera_esp32s3.menu.FlashMode.opi=OPI 80MHz
|
|
adafruit_camera_esp32s3.menu.FlashMode.opi.build.flash_mode=dout
|
|
adafruit_camera_esp32s3.menu.FlashMode.opi.build.boot=opi
|
|
adafruit_camera_esp32s3.menu.FlashMode.opi.build.boot_freq=80m
|
|
adafruit_camera_esp32s3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
adafruit_camera_esp32s3.menu.FlashSize.4M=4MB (32Mb)
|
|
adafruit_camera_esp32s3.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
adafruit_camera_esp32s3.menu.UploadSpeed.921600=921600
|
|
adafruit_camera_esp32s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_camera_esp32s3.menu.UploadSpeed.115200=115200
|
|
adafruit_camera_esp32s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_camera_esp32s3.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_camera_esp32s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_camera_esp32s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_camera_esp32s3.menu.UploadSpeed.230400=230400
|
|
adafruit_camera_esp32s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_camera_esp32s3.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_camera_esp32s3.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_camera_esp32s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_camera_esp32s3.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_camera_esp32s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_camera_esp32s3.menu.DebugLevel.none=None
|
|
adafruit_camera_esp32s3.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_camera_esp32s3.menu.DebugLevel.error=Error
|
|
adafruit_camera_esp32s3.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_camera_esp32s3.menu.DebugLevel.warn=Warn
|
|
adafruit_camera_esp32s3.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_camera_esp32s3.menu.DebugLevel.info=Info
|
|
adafruit_camera_esp32s3.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_camera_esp32s3.menu.DebugLevel.debug=Debug
|
|
adafruit_camera_esp32s3.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_camera_esp32s3.menu.DebugLevel.verbose=Verbose
|
|
adafruit_camera_esp32s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_camera_esp32s3.menu.EraseFlash.none=Disabled
|
|
adafruit_camera_esp32s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_camera_esp32s3.menu.EraseFlash.all=Enabled
|
|
adafruit_camera_esp32s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_camera_esp32s3.menu.ZigbeeMode.default=Disabled
|
|
adafruit_camera_esp32s3.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_camera_esp32s3.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_camera_esp32s3.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_camera_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_camera_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
# Adafruit Qualia ESP32-S3 RGB666
|
|
|
|
adafruit_qualia_s3_rgb666.name=Adafruit Qualia ESP32-S3 RGB666
|
|
adafruit_qualia_s3_rgb666.vid.0=0x239A
|
|
adafruit_qualia_s3_rgb666.pid.0=0x8147
|
|
adafruit_qualia_s3_rgb666.vid.1=0x239A
|
|
adafruit_qualia_s3_rgb666.pid.1=0x0147
|
|
adafruit_qualia_s3_rgb666.vid.2=0x239A
|
|
adafruit_qualia_s3_rgb666.pid.2=0x8148
|
|
adafruit_qualia_s3_rgb666.upload_port.0.vid=0x239A
|
|
adafruit_qualia_s3_rgb666.upload_port.0.pid=0x8147
|
|
adafruit_qualia_s3_rgb666.upload_port.1.vid=0x239A
|
|
adafruit_qualia_s3_rgb666.upload_port.1.pid=0x0147
|
|
adafruit_qualia_s3_rgb666.upload_port.2.vid=0x239A
|
|
adafruit_qualia_s3_rgb666.upload_port.2.pid=0x8148
|
|
|
|
adafruit_qualia_s3_rgb666.bootloader.tool=esptool_py
|
|
adafruit_qualia_s3_rgb666.bootloader.tool.default=esptool_py
|
|
|
|
adafruit_qualia_s3_rgb666.upload.tool=esptool_py
|
|
adafruit_qualia_s3_rgb666.upload.tool.default=esptool_py
|
|
adafruit_qualia_s3_rgb666.upload.tool.network=esp_ota
|
|
|
|
adafruit_qualia_s3_rgb666.upload.maximum_size=1310720
|
|
adafruit_qualia_s3_rgb666.upload.maximum_data_size=327680
|
|
adafruit_qualia_s3_rgb666.upload.flags=
|
|
adafruit_qualia_s3_rgb666.upload.extra_flags=
|
|
adafruit_qualia_s3_rgb666.upload.use_1200bps_touch=true
|
|
adafruit_qualia_s3_rgb666.upload.wait_for_upload_port=true
|
|
|
|
adafruit_qualia_s3_rgb666.serial.disableDTR=false
|
|
adafruit_qualia_s3_rgb666.serial.disableRTS=false
|
|
|
|
adafruit_qualia_s3_rgb666.build.tarch=xtensa
|
|
adafruit_qualia_s3_rgb666.build.bootloader_addr=0x0
|
|
adafruit_qualia_s3_rgb666.build.target=esp32s3
|
|
adafruit_qualia_s3_rgb666.build.mcu=esp32s3
|
|
adafruit_qualia_s3_rgb666.build.core=esp32
|
|
adafruit_qualia_s3_rgb666.build.variant=adafruit_qualia_s3_rgb666
|
|
adafruit_qualia_s3_rgb666.build.board=QUALIA_S3_RGB666
|
|
|
|
adafruit_qualia_s3_rgb666.build.usb_mode=0
|
|
adafruit_qualia_s3_rgb666.build.cdc_on_boot=1
|
|
adafruit_qualia_s3_rgb666.build.msc_on_boot=0
|
|
adafruit_qualia_s3_rgb666.build.dfu_on_boot=0
|
|
adafruit_qualia_s3_rgb666.build.f_cpu=240000000L
|
|
adafruit_qualia_s3_rgb666.build.flash_size=16MB
|
|
adafruit_qualia_s3_rgb666.build.flash_freq=80m
|
|
adafruit_qualia_s3_rgb666.build.flash_mode=dio
|
|
adafruit_qualia_s3_rgb666.build.boot=qio
|
|
adafruit_qualia_s3_rgb666.build.partitions=default
|
|
adafruit_qualia_s3_rgb666.build.defines=
|
|
adafruit_qualia_s3_rgb666.build.loop_core=
|
|
adafruit_qualia_s3_rgb666.build.event_core=
|
|
adafruit_qualia_s3_rgb666.build.flash_type=qio
|
|
adafruit_qualia_s3_rgb666.build.psram_type=opi
|
|
adafruit_qualia_s3_rgb666.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
adafruit_qualia_s3_rgb666.menu.LoopCore.1=Core 1
|
|
adafruit_qualia_s3_rgb666.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
adafruit_qualia_s3_rgb666.menu.LoopCore.0=Core 0
|
|
adafruit_qualia_s3_rgb666.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
adafruit_qualia_s3_rgb666.menu.EventsCore.1=Core 1
|
|
adafruit_qualia_s3_rgb666.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
adafruit_qualia_s3_rgb666.menu.EventsCore.0=Core 0
|
|
adafruit_qualia_s3_rgb666.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
adafruit_qualia_s3_rgb666.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
adafruit_qualia_s3_rgb666.menu.USBMode.default.build.usb_mode=0
|
|
adafruit_qualia_s3_rgb666.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
adafruit_qualia_s3_rgb666.menu.USBMode.hwcdc.build.usb_mode=1
|
|
|
|
adafruit_qualia_s3_rgb666.menu.CDCOnBoot.cdc=Enabled
|
|
adafruit_qualia_s3_rgb666.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
adafruit_qualia_s3_rgb666.menu.CDCOnBoot.default=Disabled
|
|
adafruit_qualia_s3_rgb666.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
adafruit_qualia_s3_rgb666.menu.MSCOnBoot.default=Disabled
|
|
adafruit_qualia_s3_rgb666.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
adafruit_qualia_s3_rgb666.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
adafruit_qualia_s3_rgb666.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
adafruit_qualia_s3_rgb666.menu.DFUOnBoot.default=Disabled
|
|
adafruit_qualia_s3_rgb666.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
adafruit_qualia_s3_rgb666.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
adafruit_qualia_s3_rgb666.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
adafruit_qualia_s3_rgb666.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
adafruit_qualia_s3_rgb666.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
adafruit_qualia_s3_rgb666.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
adafruit_qualia_s3_rgb666.menu.UploadMode.default=UART0 / Hardware CDC
|
|
adafruit_qualia_s3_rgb666.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
adafruit_qualia_s3_rgb666.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
adafruit_qualia_s3_rgb666.menu.PSRAM.opi=OPI PSRAM
|
|
adafruit_qualia_s3_rgb666.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
adafruit_qualia_s3_rgb666.menu.PSRAM.opi.build.psram_type=opi
|
|
adafruit_qualia_s3_rgb666.menu.PSRAM.disabled=Disabled
|
|
adafruit_qualia_s3_rgb666.menu.PSRAM.disabled.build.defines=
|
|
adafruit_qualia_s3_rgb666.menu.PSRAM.disabled.build.psram_type=opi
|
|
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.tinyuf2=TinyUF2 16MB (2MB APP/11.6MB FATFS)
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.tinyuf2.build.partitions=tinyuf2-partitions-16MB
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.tinyuf2.upload.maximum_size=2097152
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.tinyuf2_noota=TinyUF2 16MB No OTA(4MB APP/11.6MB FATFS)
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.tinyuf2_noota.build.custom_bootloader=bootloader-tinyuf2
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.tinyuf2_noota.build.partitions=tinyuf2-partitions-16MB-noota
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.tinyuf2_noota.upload.maximum_size=4194304
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.tinyuf2_noota.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.default_16MB=Default (6.25MB APP/3.43MB SPIFFS)
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.default_16MB.build.partitions=default_16MB
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.default_16MB.upload.maximum_size=6553600
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.large_spiffs=Large SPIFFS (4.5MB APP/6.93MB SPIFFS)
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.large_spiffs.build.partitions=large_spiffs_16MB
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.large_spiffs.upload.maximum_size=4718592
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9MB FATFS)
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
adafruit_qualia_s3_rgb666.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
|
|
adafruit_qualia_s3_rgb666.menu.CPUFreq.240=240MHz (WiFi)
|
|
adafruit_qualia_s3_rgb666.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
adafruit_qualia_s3_rgb666.menu.CPUFreq.160=160MHz (WiFi)
|
|
adafruit_qualia_s3_rgb666.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
adafruit_qualia_s3_rgb666.menu.CPUFreq.80=80MHz (WiFi)
|
|
adafruit_qualia_s3_rgb666.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
adafruit_qualia_s3_rgb666.menu.CPUFreq.40=40MHz
|
|
adafruit_qualia_s3_rgb666.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
adafruit_qualia_s3_rgb666.menu.CPUFreq.20=20MHz
|
|
adafruit_qualia_s3_rgb666.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
adafruit_qualia_s3_rgb666.menu.CPUFreq.10=10MHz
|
|
adafruit_qualia_s3_rgb666.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.qio=QIO 80MHz
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.qio.build.flash_mode=dio
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.qio.build.boot=qio
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.qio.build.boot_freq=80m
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.qio.build.flash_freq=80m
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.qio120=QIO 120MHz
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.qio120.build.flash_mode=dio
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.qio120.build.boot=qio
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.qio120.build.boot_freq=120m
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.qio120.build.flash_freq=80m
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.dio=DIO 80MHz
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.dio.build.flash_mode=dio
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.dio.build.boot=dio
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.dio.build.boot_freq=80m
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.dio.build.flash_freq=80m
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.opi=OPI 80MHz
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.opi.build.flash_mode=dout
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.opi.build.boot=opi
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.opi.build.boot_freq=80m
|
|
adafruit_qualia_s3_rgb666.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
adafruit_qualia_s3_rgb666.menu.FlashSize.16M=16MB (128Mb)
|
|
adafruit_qualia_s3_rgb666.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
adafruit_qualia_s3_rgb666.menu.UploadSpeed.921600=921600
|
|
adafruit_qualia_s3_rgb666.menu.UploadSpeed.921600.upload.speed=921600
|
|
adafruit_qualia_s3_rgb666.menu.UploadSpeed.115200=115200
|
|
adafruit_qualia_s3_rgb666.menu.UploadSpeed.115200.upload.speed=115200
|
|
adafruit_qualia_s3_rgb666.menu.UploadSpeed.256000.windows=256000
|
|
adafruit_qualia_s3_rgb666.menu.UploadSpeed.256000.upload.speed=256000
|
|
adafruit_qualia_s3_rgb666.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
adafruit_qualia_s3_rgb666.menu.UploadSpeed.230400=230400
|
|
adafruit_qualia_s3_rgb666.menu.UploadSpeed.230400.upload.speed=230400
|
|
adafruit_qualia_s3_rgb666.menu.UploadSpeed.460800.linux=460800
|
|
adafruit_qualia_s3_rgb666.menu.UploadSpeed.460800.macosx=460800
|
|
adafruit_qualia_s3_rgb666.menu.UploadSpeed.460800.upload.speed=460800
|
|
adafruit_qualia_s3_rgb666.menu.UploadSpeed.512000.windows=512000
|
|
adafruit_qualia_s3_rgb666.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
adafruit_qualia_s3_rgb666.menu.DebugLevel.none=None
|
|
adafruit_qualia_s3_rgb666.menu.DebugLevel.none.build.code_debug=0
|
|
adafruit_qualia_s3_rgb666.menu.DebugLevel.error=Error
|
|
adafruit_qualia_s3_rgb666.menu.DebugLevel.error.build.code_debug=1
|
|
adafruit_qualia_s3_rgb666.menu.DebugLevel.warn=Warn
|
|
adafruit_qualia_s3_rgb666.menu.DebugLevel.warn.build.code_debug=2
|
|
adafruit_qualia_s3_rgb666.menu.DebugLevel.info=Info
|
|
adafruit_qualia_s3_rgb666.menu.DebugLevel.info.build.code_debug=3
|
|
adafruit_qualia_s3_rgb666.menu.DebugLevel.debug=Debug
|
|
adafruit_qualia_s3_rgb666.menu.DebugLevel.debug.build.code_debug=4
|
|
adafruit_qualia_s3_rgb666.menu.DebugLevel.verbose=Verbose
|
|
adafruit_qualia_s3_rgb666.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
adafruit_qualia_s3_rgb666.menu.EraseFlash.none=Disabled
|
|
adafruit_qualia_s3_rgb666.menu.EraseFlash.none.upload.erase_cmd=
|
|
adafruit_qualia_s3_rgb666.menu.EraseFlash.all=Enabled
|
|
adafruit_qualia_s3_rgb666.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
adafruit_qualia_s3_rgb666.menu.ZigbeeMode.default=Disabled
|
|
adafruit_qualia_s3_rgb666.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
adafruit_qualia_s3_rgb666.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
adafruit_qualia_s3_rgb666.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
adafruit_qualia_s3_rgb666.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
adafruit_qualia_s3_rgb666.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
nodemcu-32s.name=NodeMCU-32S
|
|
|
|
nodemcu-32s.bootloader.tool=esptool_py
|
|
nodemcu-32s.bootloader.tool.default=esptool_py
|
|
|
|
nodemcu-32s.upload.tool=esptool_py
|
|
nodemcu-32s.upload.tool.default=esptool_py
|
|
nodemcu-32s.upload.tool.network=esp_ota
|
|
|
|
nodemcu-32s.upload.maximum_size=1310720
|
|
nodemcu-32s.upload.maximum_data_size=327680
|
|
nodemcu-32s.upload.flags=
|
|
nodemcu-32s.upload.extra_flags=
|
|
|
|
nodemcu-32s.serial.disableDTR=true
|
|
nodemcu-32s.serial.disableRTS=true
|
|
|
|
nodemcu-32s.build.tarch=xtensa
|
|
nodemcu-32s.build.bootloader_addr=0x1000
|
|
nodemcu-32s.build.target=esp32
|
|
nodemcu-32s.build.mcu=esp32
|
|
nodemcu-32s.build.core=esp32
|
|
nodemcu-32s.build.variant=nodemcu-32s
|
|
nodemcu-32s.build.board=NODEMCU_32S
|
|
|
|
nodemcu-32s.build.f_cpu=240000000L
|
|
nodemcu-32s.build.flash_mode=dio
|
|
nodemcu-32s.build.flash_size=4MB
|
|
nodemcu-32s.build.boot=dio
|
|
nodemcu-32s.build.partitions=default
|
|
nodemcu-32s.build.defines=
|
|
|
|
nodemcu-32s.menu.FlashFreq.80=80MHz
|
|
nodemcu-32s.menu.FlashFreq.80.build.flash_freq=80m
|
|
nodemcu-32s.menu.FlashFreq.40=40MHz
|
|
nodemcu-32s.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
nodemcu-32s.menu.UploadSpeed.115200=115200
|
|
nodemcu-32s.menu.UploadSpeed.115200.upload.speed=115200
|
|
nodemcu-32s.menu.UploadSpeed.256000.windows=256000
|
|
nodemcu-32s.menu.UploadSpeed.256000.upload.speed=256000
|
|
nodemcu-32s.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
nodemcu-32s.menu.UploadSpeed.230400=230400
|
|
nodemcu-32s.menu.UploadSpeed.230400.upload.speed=230400
|
|
nodemcu-32s.menu.UploadSpeed.512000.windows=512000
|
|
nodemcu-32s.menu.UploadSpeed.512000.upload.speed=512000
|
|
nodemcu-32s.menu.UploadSpeed.460800.linux=460800
|
|
nodemcu-32s.menu.UploadSpeed.460800.macosx=460800
|
|
nodemcu-32s.menu.UploadSpeed.460800.upload.speed=460800
|
|
nodemcu-32s.menu.UploadSpeed.921600=921600
|
|
nodemcu-32s.menu.UploadSpeed.921600.upload.speed=921600
|
|
|
|
nodemcu-32s.menu.DebugLevel.none=None
|
|
nodemcu-32s.menu.DebugLevel.none.build.code_debug=0
|
|
nodemcu-32s.menu.DebugLevel.error=Error
|
|
nodemcu-32s.menu.DebugLevel.error.build.code_debug=1
|
|
nodemcu-32s.menu.DebugLevel.warn=Warn
|
|
nodemcu-32s.menu.DebugLevel.warn.build.code_debug=2
|
|
nodemcu-32s.menu.DebugLevel.info=Info
|
|
nodemcu-32s.menu.DebugLevel.info.build.code_debug=3
|
|
nodemcu-32s.menu.DebugLevel.debug=Debug
|
|
nodemcu-32s.menu.DebugLevel.debug.build.code_debug=4
|
|
nodemcu-32s.menu.DebugLevel.verbose=Verbose
|
|
nodemcu-32s.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
nodemcu-32s.menu.EraseFlash.none=Disabled
|
|
nodemcu-32s.menu.EraseFlash.none.upload.erase_cmd=
|
|
nodemcu-32s.menu.EraseFlash.all=Enabled
|
|
nodemcu-32s.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
nologo_esp32c3_super_mini.name=Nologo ESP32C3 Super Mini
|
|
|
|
nologo_esp32c3_super_mini.upload.tool=esptool_py
|
|
nologo_esp32c3_super_mini.upload.tool.default=esptool_py
|
|
nologo_esp32c3_super_mini.upload.tool.network=esp_ota
|
|
nologo_esp32c3_super_mini.upload.maximum_size=1310720
|
|
nologo_esp32c3_super_mini.upload.maximum_data_size=327680
|
|
nologo_esp32c3_super_mini.upload.flags=
|
|
nologo_esp32c3_super_mini.upload.extra_flags=
|
|
nologo_esp32c3_super_mini.upload.use_1200bps_touch=false
|
|
nologo_esp32c3_super_mini.upload.wait_for_upload_port=false
|
|
|
|
nologo_esp32c3_super_mini.serial.disableDTR=false
|
|
nologo_esp32c3_super_mini.serial.disableRTS=false
|
|
|
|
nologo_esp32c3_super_mini.build.tarch=riscv32
|
|
nologo_esp32c3_super_mini.build.target=esp
|
|
nologo_esp32c3_super_mini.build.mcu=esp32c3
|
|
nologo_esp32c3_super_mini.build.core=esp32
|
|
nologo_esp32c3_super_mini.build.variant=nologo_esp32c3_super_mini
|
|
nologo_esp32c3_super_mini.build.board=NOLOGO_ESP32C3_SUPER_MINI
|
|
nologo_esp32c3_super_mini.build.bootloader_addr=0x0
|
|
|
|
nologo_esp32c3_super_mini.build.usb_mode=1
|
|
nologo_esp32c3_super_mini.build.cdc_on_boot=1
|
|
nologo_esp32c3_super_mini.build.f_cpu=160000000L
|
|
nologo_esp32c3_super_mini.build.flash_size=4MB
|
|
nologo_esp32c3_super_mini.build.flash_freq=80m
|
|
nologo_esp32c3_super_mini.build.flash_mode=qio
|
|
nologo_esp32c3_super_mini.build.boot=qio
|
|
nologo_esp32c3_super_mini.build.partitions=default
|
|
nologo_esp32c3_super_mini.build.defines=
|
|
|
|
nologo_esp32c3_super_mini.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
nologo_esp32c3_super_mini.menu.USBMode.hwcdc.build.usb_mode=1
|
|
nologo_esp32c3_super_mini.menu.USBMode.default=USB-OTG
|
|
nologo_esp32c3_super_mini.menu.USBMode.default.build.usb_mode=0
|
|
|
|
nologo_esp32c3_super_mini.menu.JTAGAdapter.default=Disabled
|
|
nologo_esp32c3_super_mini.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
nologo_esp32c3_super_mini.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
nologo_esp32c3_super_mini.menu.JTAGAdapter.builtin.build.openocdscript=esp32c3-builtin.cfg
|
|
nologo_esp32c3_super_mini.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
nologo_esp32c3_super_mini.menu.JTAGAdapter.external=FTDI Adapter
|
|
nologo_esp32c3_super_mini.menu.JTAGAdapter.external.build.openocdscript=esp32c3-ftdi.cfg
|
|
nologo_esp32c3_super_mini.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
nologo_esp32c3_super_mini.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
nologo_esp32c3_super_mini.menu.JTAGAdapter.bridge.build.openocdscript=esp32c3-bridge.cfg
|
|
nologo_esp32c3_super_mini.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
nologo_esp32c3_super_mini.menu.CDCOnBoot.default=Enabled
|
|
nologo_esp32c3_super_mini.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
nologo_esp32c3_super_mini.menu.CDCOnBoot.cdc=Enabled
|
|
nologo_esp32c3_super_mini.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.default.build.partitions=default
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
nologo_esp32c3_super_mini.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
|
|
nologo_esp32c3_super_mini.menu.CPUFreq.160=160MHz (WiFi)
|
|
nologo_esp32c3_super_mini.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
nologo_esp32c3_super_mini.menu.CPUFreq.80=80MHz (WiFi)
|
|
nologo_esp32c3_super_mini.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
nologo_esp32c3_super_mini.menu.CPUFreq.40=40MHz
|
|
nologo_esp32c3_super_mini.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
nologo_esp32c3_super_mini.menu.CPUFreq.20=20MHz
|
|
nologo_esp32c3_super_mini.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
nologo_esp32c3_super_mini.menu.CPUFreq.10=10MHz
|
|
nologo_esp32c3_super_mini.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
nologo_esp32c3_super_mini.menu.FlashMode.qio=QIO
|
|
nologo_esp32c3_super_mini.menu.FlashMode.qio.build.flash_mode=dio
|
|
nologo_esp32c3_super_mini.menu.FlashMode.qio.build.boot=qio
|
|
nologo_esp32c3_super_mini.menu.FlashMode.dio=DIO
|
|
nologo_esp32c3_super_mini.menu.FlashMode.dio.build.flash_mode=dio
|
|
nologo_esp32c3_super_mini.menu.FlashMode.dio.build.boot=dio
|
|
|
|
nologo_esp32c3_super_mini.menu.FlashFreq.80=80MHz
|
|
nologo_esp32c3_super_mini.menu.FlashFreq.80.build.flash_freq=80m
|
|
nologo_esp32c3_super_mini.menu.FlashFreq.40=40MHz
|
|
nologo_esp32c3_super_mini.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
nologo_esp32c3_super_mini.menu.UploadSpeed.921600=921600
|
|
nologo_esp32c3_super_mini.menu.UploadSpeed.921600.upload.speed=921600
|
|
nologo_esp32c3_super_mini.menu.UploadSpeed.115200=115200
|
|
nologo_esp32c3_super_mini.menu.UploadSpeed.115200.upload.speed=115200
|
|
nologo_esp32c3_super_mini.menu.UploadSpeed.256000.windows=256000
|
|
nologo_esp32c3_super_mini.menu.UploadSpeed.256000.upload.speed=256000
|
|
nologo_esp32c3_super_mini.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
nologo_esp32c3_super_mini.menu.UploadSpeed.230400=230400
|
|
nologo_esp32c3_super_mini.menu.UploadSpeed.230400.upload.speed=230400
|
|
nologo_esp32c3_super_mini.menu.UploadSpeed.460800.linux=460800
|
|
nologo_esp32c3_super_mini.menu.UploadSpeed.460800.macosx=460800
|
|
nologo_esp32c3_super_mini.menu.UploadSpeed.460800.upload.speed=460800
|
|
nologo_esp32c3_super_mini.menu.UploadSpeed.512000.windows=512000
|
|
nologo_esp32c3_super_mini.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
nologo_esp32c3_super_mini.menu.DebugLevel.none=None
|
|
nologo_esp32c3_super_mini.menu.DebugLevel.none.build.code_debug=0
|
|
nologo_esp32c3_super_mini.menu.DebugLevel.error=Error
|
|
nologo_esp32c3_super_mini.menu.DebugLevel.error.build.code_debug=1
|
|
nologo_esp32c3_super_mini.menu.DebugLevel.warn=Warn
|
|
nologo_esp32c3_super_mini.menu.DebugLevel.warn.build.code_debug=2
|
|
nologo_esp32c3_super_mini.menu.DebugLevel.info=Info
|
|
nologo_esp32c3_super_mini.menu.DebugLevel.info.build.code_debug=3
|
|
nologo_esp32c3_super_mini.menu.DebugLevel.debug=Debug
|
|
nologo_esp32c3_super_mini.menu.DebugLevel.debug.build.code_debug=4
|
|
nologo_esp32c3_super_mini.menu.DebugLevel.verbose=Verbose
|
|
nologo_esp32c3_super_mini.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
nologo_esp32c3_super_mini.menu.EraseFlash.none=Disabled
|
|
nologo_esp32c3_super_mini.menu.EraseFlash.none.upload.erase_cmd=
|
|
nologo_esp32c3_super_mini.menu.EraseFlash.all=Enabled
|
|
nologo_esp32c3_super_mini.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
nologo_esp32s3_pico.name=Nologo ESP32S3 Pico
|
|
|
|
nologo_esp32s3_pico.bootloader.tool=esptool_py
|
|
nologo_esp32s3_pico.bootloader.tool.default=esptool_py
|
|
|
|
nologo_esp32s3_pico.upload.tool=esptool_py
|
|
nologo_esp32s3_pico.upload.tool.default=esptool_py
|
|
nologo_esp32s3_pico.upload.tool.network=esp_ota
|
|
|
|
nologo_esp32s3_pico.upload.maximum_size=1310720
|
|
nologo_esp32s3_pico.upload.maximum_data_size=327680
|
|
nologo_esp32s3_pico.upload.flags=
|
|
nologo_esp32s3_pico.upload.extra_flags=
|
|
nologo_esp32s3_pico.upload.use_1200bps_touch=false
|
|
nologo_esp32s3_pico.upload.wait_for_upload_port=false
|
|
|
|
nologo_esp32s3_pico.serial.disableDTR=false
|
|
nologo_esp32s3_pico.serial.disableRTS=false
|
|
|
|
nologo_esp32s3_pico.build.tarch=xtensa
|
|
nologo_esp32s3_pico.build.bootloader_addr=0x0
|
|
nologo_esp32s3_pico.build.target=esp32s3
|
|
nologo_esp32s3_pico.build.mcu=esp32s3
|
|
nologo_esp32s3_pico.build.core=esp32
|
|
nologo_esp32s3_pico.build.variant=nologo_esp32s3_pico
|
|
nologo_esp32s3_pico.build.board=NOLOGO_ESP32S3_PICO
|
|
|
|
nologo_esp32s3_pico.build.usb_mode=1
|
|
nologo_esp32s3_pico.build.cdc_on_boot=1
|
|
nologo_esp32s3_pico.build.msc_on_boot=0
|
|
nologo_esp32s3_pico.build.dfu_on_boot=0
|
|
nologo_esp32s3_pico.build.f_cpu=240000000L
|
|
nologo_esp32s3_pico.build.flash_size=8MB
|
|
nologo_esp32s3_pico.build.flash_freq=80m
|
|
nologo_esp32s3_pico.build.flash_mode=dio
|
|
nologo_esp32s3_pico.build.boot=qio
|
|
nologo_esp32s3_pico.build.boot_freq=80m
|
|
nologo_esp32s3_pico.build.partitions=default
|
|
nologo_esp32s3_pico.build.defines=
|
|
nologo_esp32s3_pico.build.loop_core=
|
|
nologo_esp32s3_pico.build.event_core=
|
|
nologo_esp32s3_pico.build.psram_type=qspi
|
|
nologo_esp32s3_pico.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
nologo_esp32s3_pico.menu.JTAGAdapter.default=Disabled
|
|
nologo_esp32s3_pico.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
nologo_esp32s3_pico.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
nologo_esp32s3_pico.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
nologo_esp32s3_pico.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
nologo_esp32s3_pico.menu.JTAGAdapter.external=FTDI Adapter
|
|
nologo_esp32s3_pico.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
nologo_esp32s3_pico.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
nologo_esp32s3_pico.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
nologo_esp32s3_pico.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
nologo_esp32s3_pico.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
nologo_esp32s3_pico.menu.PSRAM.disabled=Disabled
|
|
nologo_esp32s3_pico.menu.PSRAM.disabled.build.defines=
|
|
nologo_esp32s3_pico.menu.PSRAM.disabled.build.psram_type=qspi
|
|
nologo_esp32s3_pico.menu.PSRAM.enabled=QSPI PSRAM
|
|
nologo_esp32s3_pico.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
nologo_esp32s3_pico.menu.PSRAM.enabled.build.psram_type=qspi
|
|
nologo_esp32s3_pico.menu.PSRAM.opi=OPI PSRAM
|
|
nologo_esp32s3_pico.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
nologo_esp32s3_pico.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
nologo_esp32s3_pico.menu.FlashMode.qio=QIO 80MHz
|
|
nologo_esp32s3_pico.menu.FlashMode.qio.build.flash_mode=dio
|
|
nologo_esp32s3_pico.menu.FlashMode.qio.build.boot=qio
|
|
nologo_esp32s3_pico.menu.FlashMode.qio.build.boot_freq=80m
|
|
nologo_esp32s3_pico.menu.FlashMode.qio.build.flash_freq=80m
|
|
nologo_esp32s3_pico.menu.FlashMode.qio120=QIO 120MHz
|
|
nologo_esp32s3_pico.menu.FlashMode.qio120.build.flash_mode=dio
|
|
nologo_esp32s3_pico.menu.FlashMode.qio120.build.boot=qio
|
|
nologo_esp32s3_pico.menu.FlashMode.qio120.build.boot_freq=120m
|
|
nologo_esp32s3_pico.menu.FlashMode.qio120.build.flash_freq=80m
|
|
nologo_esp32s3_pico.menu.FlashMode.dio=DIO 80MHz
|
|
nologo_esp32s3_pico.menu.FlashMode.dio.build.flash_mode=dio
|
|
nologo_esp32s3_pico.menu.FlashMode.dio.build.boot=dio
|
|
nologo_esp32s3_pico.menu.FlashMode.dio.build.boot_freq=80m
|
|
nologo_esp32s3_pico.menu.FlashMode.dio.build.flash_freq=80m
|
|
nologo_esp32s3_pico.menu.FlashMode.opi=OPI 80MHz
|
|
nologo_esp32s3_pico.menu.FlashMode.opi.build.flash_mode=dout
|
|
nologo_esp32s3_pico.menu.FlashMode.opi.build.boot=opi
|
|
nologo_esp32s3_pico.menu.FlashMode.opi.build.boot_freq=80m
|
|
nologo_esp32s3_pico.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
nologo_esp32s3_pico.menu.FlashSize.8M=8MB (64Mb)
|
|
nologo_esp32s3_pico.menu.FlashSize.8M.build.flash_size=8MB
|
|
nologo_esp32s3_pico.menu.FlashSize.8M.build.partitions=default_8MB
|
|
nologo_esp32s3_pico.menu.FlashSize.16M=16MB (128Mb)
|
|
nologo_esp32s3_pico.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
nologo_esp32s3_pico.menu.LoopCore.1=Core 1
|
|
nologo_esp32s3_pico.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
nologo_esp32s3_pico.menu.LoopCore.0=Core 0
|
|
nologo_esp32s3_pico.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
nologo_esp32s3_pico.menu.EventsCore.1=Core 1
|
|
nologo_esp32s3_pico.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
nologo_esp32s3_pico.menu.EventsCore.0=Core 0
|
|
nologo_esp32s3_pico.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
nologo_esp32s3_pico.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
nologo_esp32s3_pico.menu.USBMode.hwcdc.build.usb_mode=1
|
|
nologo_esp32s3_pico.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
nologo_esp32s3_pico.menu.USBMode.default.build.usb_mode=0
|
|
|
|
nologo_esp32s3_pico.menu.CDCOnBoot.default=Enabled
|
|
nologo_esp32s3_pico.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
nologo_esp32s3_pico.menu.CDCOnBoot.cdc=Enabled
|
|
nologo_esp32s3_pico.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
nologo_esp32s3_pico.menu.MSCOnBoot.default=Disabled
|
|
nologo_esp32s3_pico.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
nologo_esp32s3_pico.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
nologo_esp32s3_pico.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
nologo_esp32s3_pico.menu.DFUOnBoot.default=Disabled
|
|
nologo_esp32s3_pico.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
nologo_esp32s3_pico.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
nologo_esp32s3_pico.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
nologo_esp32s3_pico.menu.UploadMode.default=UART0 / Hardware CDC
|
|
nologo_esp32s3_pico.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
nologo_esp32s3_pico.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
nologo_esp32s3_pico.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
nologo_esp32s3_pico.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
nologo_esp32s3_pico.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
nologo_esp32s3_pico.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
nologo_esp32s3_pico.menu.PartitionScheme.default.build.partitions=default
|
|
nologo_esp32s3_pico.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
nologo_esp32s3_pico.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
nologo_esp32s3_pico.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
nologo_esp32s3_pico.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
nologo_esp32s3_pico.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
nologo_esp32s3_pico.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
nologo_esp32s3_pico.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
nologo_esp32s3_pico.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
nologo_esp32s3_pico.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
nologo_esp32s3_pico.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
nologo_esp32s3_pico.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
nologo_esp32s3_pico.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
nologo_esp32s3_pico.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
nologo_esp32s3_pico.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
nologo_esp32s3_pico.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
nologo_esp32s3_pico.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
nologo_esp32s3_pico.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
nologo_esp32s3_pico.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
nologo_esp32s3_pico.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
nologo_esp32s3_pico.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
nologo_esp32s3_pico.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
nologo_esp32s3_pico.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
nologo_esp32s3_pico.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
nologo_esp32s3_pico.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
nologo_esp32s3_pico.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
nologo_esp32s3_pico.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
nologo_esp32s3_pico.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
nologo_esp32s3_pico.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
nologo_esp32s3_pico.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
nologo_esp32s3_pico.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
nologo_esp32s3_pico.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
nologo_esp32s3_pico.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
nologo_esp32s3_pico.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
nologo_esp32s3_pico.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
nologo_esp32s3_pico.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
nologo_esp32s3_pico.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
nologo_esp32s3_pico.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
nologo_esp32s3_pico.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
nologo_esp32s3_pico.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
nologo_esp32s3_pico.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
nologo_esp32s3_pico.menu.PartitionScheme.app5M_fat24M_32MB=32M Flash (4.8MB APP/22MB FATFS)
|
|
nologo_esp32s3_pico.menu.PartitionScheme.app5M_fat24M_32MB.build.partitions=large_fat_32MB
|
|
nologo_esp32s3_pico.menu.PartitionScheme.app5M_fat24M_32MB.upload.maximum_size=4718592
|
|
nologo_esp32s3_pico.menu.PartitionScheme.app5M_little24M_32MB=32M Flash (4.8MB APP/22MB LittleFS)
|
|
nologo_esp32s3_pico.menu.PartitionScheme.app5M_little24M_32MB.build.partitions=large_littlefs_32MB
|
|
nologo_esp32s3_pico.menu.PartitionScheme.app5M_little24M_32MB.upload.maximum_size=4718592
|
|
nologo_esp32s3_pico.menu.PartitionScheme.esp_sr_16=ESP SR 16M (3MB APP/7MB SPIFFS/2.9MB MODEL)
|
|
nologo_esp32s3_pico.menu.PartitionScheme.esp_sr_16.upload.maximum_size=3145728
|
|
nologo_esp32s3_pico.menu.PartitionScheme.esp_sr_16.upload.extra_flags=0xD10000 {build.path}/srmodels.bin
|
|
nologo_esp32s3_pico.menu.PartitionScheme.esp_sr_16.build.partitions=esp_sr_16
|
|
nologo_esp32s3_pico.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
nologo_esp32s3_pico.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
nologo_esp32s3_pico.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
nologo_esp32s3_pico.menu.PartitionScheme.custom=Custom
|
|
nologo_esp32s3_pico.menu.PartitionScheme.custom.build.partitions=
|
|
nologo_esp32s3_pico.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
nologo_esp32s3_pico.menu.CPUFreq.240=240MHz (WiFi)
|
|
nologo_esp32s3_pico.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
nologo_esp32s3_pico.menu.CPUFreq.160=160MHz (WiFi)
|
|
nologo_esp32s3_pico.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
nologo_esp32s3_pico.menu.CPUFreq.80=80MHz (WiFi)
|
|
nologo_esp32s3_pico.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
nologo_esp32s3_pico.menu.CPUFreq.40=40MHz
|
|
nologo_esp32s3_pico.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
nologo_esp32s3_pico.menu.CPUFreq.20=20MHz
|
|
nologo_esp32s3_pico.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
nologo_esp32s3_pico.menu.CPUFreq.10=10MHz
|
|
nologo_esp32s3_pico.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
nologo_esp32s3_pico.menu.UploadSpeed.921600=921600
|
|
nologo_esp32s3_pico.menu.UploadSpeed.921600.upload.speed=921600
|
|
nologo_esp32s3_pico.menu.UploadSpeed.115200=115200
|
|
nologo_esp32s3_pico.menu.UploadSpeed.115200.upload.speed=115200
|
|
nologo_esp32s3_pico.menu.UploadSpeed.256000.windows=256000
|
|
nologo_esp32s3_pico.menu.UploadSpeed.256000.upload.speed=256000
|
|
nologo_esp32s3_pico.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
nologo_esp32s3_pico.menu.UploadSpeed.230400=230400
|
|
nologo_esp32s3_pico.menu.UploadSpeed.230400.upload.speed=230400
|
|
nologo_esp32s3_pico.menu.UploadSpeed.460800.linux=460800
|
|
nologo_esp32s3_pico.menu.UploadSpeed.460800.macosx=460800
|
|
nologo_esp32s3_pico.menu.UploadSpeed.460800.upload.speed=460800
|
|
nologo_esp32s3_pico.menu.UploadSpeed.512000.windows=512000
|
|
nologo_esp32s3_pico.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
nologo_esp32s3_pico.menu.DebugLevel.none=None
|
|
nologo_esp32s3_pico.menu.DebugLevel.none.build.code_debug=0
|
|
nologo_esp32s3_pico.menu.DebugLevel.error=Error
|
|
nologo_esp32s3_pico.menu.DebugLevel.error.build.code_debug=1
|
|
nologo_esp32s3_pico.menu.DebugLevel.warn=Warn
|
|
nologo_esp32s3_pico.menu.DebugLevel.warn.build.code_debug=2
|
|
nologo_esp32s3_pico.menu.DebugLevel.info=Info
|
|
nologo_esp32s3_pico.menu.DebugLevel.info.build.code_debug=3
|
|
nologo_esp32s3_pico.menu.DebugLevel.debug=Debug
|
|
nologo_esp32s3_pico.menu.DebugLevel.debug.build.code_debug=4
|
|
nologo_esp32s3_pico.menu.DebugLevel.verbose=Verbose
|
|
nologo_esp32s3_pico.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
nologo_esp32s3_pico.menu.EraseFlash.none=Disabled
|
|
nologo_esp32s3_pico.menu.EraseFlash.none.upload.erase_cmd=
|
|
nologo_esp32s3_pico.menu.EraseFlash.all=Enabled
|
|
nologo_esp32s3_pico.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
nologo_esp32s3_pico.menu.ZigbeeMode.default=Disabled
|
|
nologo_esp32s3_pico.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
nologo_esp32s3_pico.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
nologo_esp32s3_pico.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
nologo_esp32s3_pico.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
nologo_esp32s3_pico.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
mhetesp32devkit.name=MH ET LIVE ESP32DevKIT
|
|
|
|
mhetesp32devkit.bootloader.tool=esptool_py
|
|
mhetesp32devkit.bootloader.tool.default=esptool_py
|
|
|
|
mhetesp32devkit.upload.tool=esptool_py
|
|
mhetesp32devkit.upload.tool.default=esptool_py
|
|
mhetesp32devkit.upload.tool.network=esp_ota
|
|
|
|
mhetesp32devkit.upload.maximum_size=1310720
|
|
mhetesp32devkit.upload.maximum_data_size=327680
|
|
mhetesp32devkit.upload.flags=
|
|
mhetesp32devkit.upload.extra_flags=
|
|
|
|
mhetesp32devkit.serial.disableDTR=true
|
|
mhetesp32devkit.serial.disableRTS=true
|
|
|
|
mhetesp32devkit.build.tarch=xtensa
|
|
mhetesp32devkit.build.bootloader_addr=0x1000
|
|
mhetesp32devkit.build.target=esp32
|
|
mhetesp32devkit.build.mcu=esp32
|
|
mhetesp32devkit.build.core=esp32
|
|
mhetesp32devkit.build.variant=mhetesp32devkit
|
|
mhetesp32devkit.build.board=MH_ET_LIVE_ESP32DEVKIT
|
|
|
|
mhetesp32devkit.build.f_cpu=240000000L
|
|
mhetesp32devkit.build.flash_mode=dio
|
|
mhetesp32devkit.build.flash_size=4MB
|
|
mhetesp32devkit.build.boot=dio
|
|
mhetesp32devkit.build.partitions=default
|
|
mhetesp32devkit.build.defines=
|
|
|
|
mhetesp32devkit.menu.FlashFreq.80=80MHz
|
|
mhetesp32devkit.menu.FlashFreq.80.build.flash_freq=80m
|
|
mhetesp32devkit.menu.FlashFreq.40=40MHz
|
|
mhetesp32devkit.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
mhetesp32devkit.menu.PartitionScheme.default=Default
|
|
mhetesp32devkit.menu.PartitionScheme.default.build.partitions=default
|
|
mhetesp32devkit.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
mhetesp32devkit.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
mhetesp32devkit.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
mhetesp32devkit.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
mhetesp32devkit.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
mhetesp32devkit.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
mhetesp32devkit.menu.UploadSpeed.921600=921600
|
|
mhetesp32devkit.menu.UploadSpeed.921600.upload.speed=921600
|
|
mhetesp32devkit.menu.UploadSpeed.115200=115200
|
|
mhetesp32devkit.menu.UploadSpeed.115200.upload.speed=115200
|
|
mhetesp32devkit.menu.UploadSpeed.256000.windows=256000
|
|
mhetesp32devkit.menu.UploadSpeed.256000.upload.speed=256000
|
|
mhetesp32devkit.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
mhetesp32devkit.menu.UploadSpeed.230400=230400
|
|
mhetesp32devkit.menu.UploadSpeed.230400.upload.speed=230400
|
|
mhetesp32devkit.menu.UploadSpeed.460800.linux=460800
|
|
mhetesp32devkit.menu.UploadSpeed.460800.macosx=460800
|
|
mhetesp32devkit.menu.UploadSpeed.460800.upload.speed=460800
|
|
mhetesp32devkit.menu.UploadSpeed.512000.windows=512000
|
|
mhetesp32devkit.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
mhetesp32devkit.menu.DebugLevel.none=None
|
|
mhetesp32devkit.menu.DebugLevel.none.build.code_debug=0
|
|
mhetesp32devkit.menu.DebugLevel.error=Error
|
|
mhetesp32devkit.menu.DebugLevel.error.build.code_debug=1
|
|
mhetesp32devkit.menu.DebugLevel.warn=Warn
|
|
mhetesp32devkit.menu.DebugLevel.warn.build.code_debug=2
|
|
mhetesp32devkit.menu.DebugLevel.info=Info
|
|
mhetesp32devkit.menu.DebugLevel.info.build.code_debug=3
|
|
mhetesp32devkit.menu.DebugLevel.debug=Debug
|
|
mhetesp32devkit.menu.DebugLevel.debug.build.code_debug=4
|
|
mhetesp32devkit.menu.DebugLevel.verbose=Verbose
|
|
mhetesp32devkit.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
mhetesp32devkit.menu.EraseFlash.none=Disabled
|
|
mhetesp32devkit.menu.EraseFlash.none.upload.erase_cmd=
|
|
mhetesp32devkit.menu.EraseFlash.all=Enabled
|
|
mhetesp32devkit.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
mhetesp32minikit.name=MH ET LIVE ESP32MiniKit
|
|
|
|
mhetesp32minikit.bootloader.tool=esptool_py
|
|
mhetesp32minikit.bootloader.tool.default=esptool_py
|
|
|
|
mhetesp32minikit.upload.tool=esptool_py
|
|
mhetesp32minikit.upload.tool.default=esptool_py
|
|
mhetesp32minikit.upload.tool.network=esp_ota
|
|
|
|
mhetesp32minikit.upload.maximum_size=1310720
|
|
mhetesp32minikit.upload.maximum_data_size=327680
|
|
mhetesp32minikit.upload.flags=
|
|
mhetesp32minikit.upload.extra_flags=
|
|
|
|
mhetesp32minikit.serial.disableDTR=true
|
|
mhetesp32minikit.serial.disableRTS=true
|
|
|
|
mhetesp32minikit.build.tarch=xtensa
|
|
mhetesp32minikit.build.bootloader_addr=0x1000
|
|
mhetesp32minikit.build.target=esp32
|
|
mhetesp32minikit.build.mcu=esp32
|
|
mhetesp32minikit.build.core=esp32
|
|
mhetesp32minikit.build.variant=mhetesp32minikit
|
|
mhetesp32minikit.build.board=MH_ET_LIVE_ESP32MINIKIT
|
|
|
|
mhetesp32minikit.build.f_cpu=240000000L
|
|
mhetesp32minikit.build.flash_mode=dio
|
|
mhetesp32minikit.build.flash_size=4MB
|
|
mhetesp32minikit.build.boot=dio
|
|
mhetesp32minikit.build.partitions=default
|
|
mhetesp32minikit.build.defines=
|
|
|
|
mhetesp32minikit.menu.FlashFreq.80=80MHz
|
|
mhetesp32minikit.menu.FlashFreq.80.build.flash_freq=80m
|
|
mhetesp32minikit.menu.FlashFreq.40=40MHz
|
|
mhetesp32minikit.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
mhetesp32minikit.menu.PartitionScheme.default=Default with spiffs
|
|
mhetesp32minikit.menu.PartitionScheme.default.build.partitions=default
|
|
mhetesp32minikit.menu.PartitionScheme.defaultffat=Default with ffat
|
|
mhetesp32minikit.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
mhetesp32minikit.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
mhetesp32minikit.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
mhetesp32minikit.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
mhetesp32minikit.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
mhetesp32minikit.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
mhetesp32minikit.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
mhetesp32minikit.menu.UploadSpeed.921600=921600
|
|
mhetesp32minikit.menu.UploadSpeed.921600.upload.speed=921600
|
|
mhetesp32minikit.menu.UploadSpeed.115200=115200
|
|
mhetesp32minikit.menu.UploadSpeed.115200.upload.speed=115200
|
|
mhetesp32minikit.menu.UploadSpeed.256000.windows=256000
|
|
mhetesp32minikit.menu.UploadSpeed.256000.upload.speed=256000
|
|
mhetesp32minikit.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
mhetesp32minikit.menu.UploadSpeed.230400=230400
|
|
mhetesp32minikit.menu.UploadSpeed.230400.upload.speed=230400
|
|
mhetesp32minikit.menu.UploadSpeed.460800.linux=460800
|
|
mhetesp32minikit.menu.UploadSpeed.460800.macosx=460800
|
|
mhetesp32minikit.menu.UploadSpeed.460800.upload.speed=460800
|
|
mhetesp32minikit.menu.UploadSpeed.512000.windows=512000
|
|
mhetesp32minikit.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
mhetesp32minikit.menu.DebugLevel.none=None
|
|
mhetesp32minikit.menu.DebugLevel.none.build.code_debug=0
|
|
mhetesp32minikit.menu.DebugLevel.error=Error
|
|
mhetesp32minikit.menu.DebugLevel.error.build.code_debug=1
|
|
mhetesp32minikit.menu.DebugLevel.warn=Warn
|
|
mhetesp32minikit.menu.DebugLevel.warn.build.code_debug=2
|
|
mhetesp32minikit.menu.DebugLevel.info=Info
|
|
mhetesp32minikit.menu.DebugLevel.info.build.code_debug=3
|
|
mhetesp32minikit.menu.DebugLevel.debug=Debug
|
|
mhetesp32minikit.menu.DebugLevel.debug.build.code_debug=4
|
|
mhetesp32minikit.menu.DebugLevel.verbose=Verbose
|
|
mhetesp32minikit.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
mhetesp32minikit.menu.EraseFlash.none=Disabled
|
|
mhetesp32minikit.menu.EraseFlash.none.upload.erase_cmd=
|
|
mhetesp32minikit.menu.EraseFlash.all=Enabled
|
|
mhetesp32minikit.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32vn-iot-uno.name=ESP32vn IoT Uno
|
|
|
|
esp32vn-iot-uno.bootloader.tool=esptool_py
|
|
esp32vn-iot-uno.bootloader.tool.default=esptool_py
|
|
|
|
esp32vn-iot-uno.upload.tool=esptool_py
|
|
esp32vn-iot-uno.upload.tool.default=esptool_py
|
|
esp32vn-iot-uno.upload.tool.network=esp_ota
|
|
|
|
esp32vn-iot-uno.upload.maximum_size=1310720
|
|
esp32vn-iot-uno.upload.maximum_data_size=327680
|
|
esp32vn-iot-uno.upload.flags=
|
|
esp32vn-iot-uno.upload.extra_flags=
|
|
|
|
esp32vn-iot-uno.serial.disableDTR=true
|
|
esp32vn-iot-uno.serial.disableRTS=true
|
|
|
|
esp32vn-iot-uno.build.tarch=xtensa
|
|
esp32vn-iot-uno.build.bootloader_addr=0x1000
|
|
esp32vn-iot-uno.build.target=esp32
|
|
esp32vn-iot-uno.build.mcu=esp32
|
|
esp32vn-iot-uno.build.core=esp32
|
|
esp32vn-iot-uno.build.variant=esp32vn-iot-uno
|
|
esp32vn-iot-uno.build.board=esp32vn_iot_uno
|
|
|
|
esp32vn-iot-uno.build.f_cpu=240000000L
|
|
esp32vn-iot-uno.build.flash_mode=dio
|
|
esp32vn-iot-uno.build.flash_size=4MB
|
|
esp32vn-iot-uno.build.boot=dio
|
|
esp32vn-iot-uno.build.partitions=default
|
|
esp32vn-iot-uno.build.defines=
|
|
|
|
esp32vn-iot-uno.menu.FlashFreq.80=80MHz
|
|
esp32vn-iot-uno.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32vn-iot-uno.menu.FlashFreq.40=40MHz
|
|
esp32vn-iot-uno.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32vn-iot-uno.menu.UploadSpeed.921600=921600
|
|
esp32vn-iot-uno.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32vn-iot-uno.menu.UploadSpeed.115200=115200
|
|
esp32vn-iot-uno.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32vn-iot-uno.menu.UploadSpeed.256000.windows=256000
|
|
esp32vn-iot-uno.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32vn-iot-uno.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32vn-iot-uno.menu.UploadSpeed.230400=230400
|
|
esp32vn-iot-uno.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32vn-iot-uno.menu.UploadSpeed.460800.linux=460800
|
|
esp32vn-iot-uno.menu.UploadSpeed.460800.macosx=460800
|
|
esp32vn-iot-uno.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32vn-iot-uno.menu.UploadSpeed.512000.windows=512000
|
|
esp32vn-iot-uno.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32vn-iot-uno.menu.DebugLevel.none=None
|
|
esp32vn-iot-uno.menu.DebugLevel.none.build.code_debug=0
|
|
esp32vn-iot-uno.menu.DebugLevel.error=Error
|
|
esp32vn-iot-uno.menu.DebugLevel.error.build.code_debug=1
|
|
esp32vn-iot-uno.menu.DebugLevel.warn=Warn
|
|
esp32vn-iot-uno.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32vn-iot-uno.menu.DebugLevel.info=Info
|
|
esp32vn-iot-uno.menu.DebugLevel.info.build.code_debug=3
|
|
esp32vn-iot-uno.menu.DebugLevel.debug=Debug
|
|
esp32vn-iot-uno.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32vn-iot-uno.menu.DebugLevel.verbose=Verbose
|
|
esp32vn-iot-uno.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32vn-iot-uno.menu.EraseFlash.none=Disabled
|
|
esp32vn-iot-uno.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32vn-iot-uno.menu.EraseFlash.all=Enabled
|
|
esp32vn-iot-uno.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32doit-devkit-v1.name=DOIT ESP32 DEVKIT V1
|
|
|
|
esp32doit-devkit-v1.bootloader.tool=esptool_py
|
|
esp32doit-devkit-v1.bootloader.tool.default=esptool_py
|
|
|
|
esp32doit-devkit-v1.upload.tool=esptool_py
|
|
esp32doit-devkit-v1.upload.tool.default=esptool_py
|
|
esp32doit-devkit-v1.upload.tool.network=esp_ota
|
|
|
|
esp32doit-devkit-v1.upload.maximum_size=1310720
|
|
esp32doit-devkit-v1.upload.maximum_data_size=327680
|
|
esp32doit-devkit-v1.upload.flags=
|
|
esp32doit-devkit-v1.upload.extra_flags=
|
|
|
|
esp32doit-devkit-v1.serial.disableDTR=true
|
|
esp32doit-devkit-v1.serial.disableRTS=true
|
|
|
|
esp32doit-devkit-v1.build.tarch=xtensa
|
|
esp32doit-devkit-v1.build.bootloader_addr=0x1000
|
|
esp32doit-devkit-v1.build.target=esp32
|
|
esp32doit-devkit-v1.build.mcu=esp32
|
|
esp32doit-devkit-v1.build.core=esp32
|
|
esp32doit-devkit-v1.build.variant=doitESP32devkitV1
|
|
esp32doit-devkit-v1.build.board=ESP32_DEV
|
|
|
|
esp32doit-devkit-v1.build.f_cpu=240000000L
|
|
esp32doit-devkit-v1.build.flash_mode=dio
|
|
esp32doit-devkit-v1.build.flash_size=4MB
|
|
esp32doit-devkit-v1.build.boot=dio
|
|
esp32doit-devkit-v1.build.partitions=default
|
|
esp32doit-devkit-v1.build.defines=
|
|
|
|
esp32doit-devkit-v1.menu.FlashFreq.80=80MHz
|
|
esp32doit-devkit-v1.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32doit-devkit-v1.menu.FlashFreq.40=40MHz
|
|
esp32doit-devkit-v1.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32doit-devkit-v1.menu.UploadSpeed.921600=921600
|
|
esp32doit-devkit-v1.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32doit-devkit-v1.menu.UploadSpeed.115200=115200
|
|
esp32doit-devkit-v1.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32doit-devkit-v1.menu.UploadSpeed.256000.windows=256000
|
|
esp32doit-devkit-v1.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32doit-devkit-v1.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32doit-devkit-v1.menu.UploadSpeed.230400=230400
|
|
esp32doit-devkit-v1.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32doit-devkit-v1.menu.UploadSpeed.460800.linux=460800
|
|
esp32doit-devkit-v1.menu.UploadSpeed.460800.macosx=460800
|
|
esp32doit-devkit-v1.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32doit-devkit-v1.menu.UploadSpeed.512000.windows=512000
|
|
esp32doit-devkit-v1.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32doit-devkit-v1.menu.DebugLevel.none=None
|
|
esp32doit-devkit-v1.menu.DebugLevel.none.build.code_debug=0
|
|
esp32doit-devkit-v1.menu.DebugLevel.error=Error
|
|
esp32doit-devkit-v1.menu.DebugLevel.error.build.code_debug=1
|
|
esp32doit-devkit-v1.menu.DebugLevel.warn=Warn
|
|
esp32doit-devkit-v1.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32doit-devkit-v1.menu.DebugLevel.info=Info
|
|
esp32doit-devkit-v1.menu.DebugLevel.info.build.code_debug=3
|
|
esp32doit-devkit-v1.menu.DebugLevel.debug=Debug
|
|
esp32doit-devkit-v1.menu.DebugLevel.debug.build.code_debug=4
|
|
|
|
esp32doit-devkit-v1.menu.EraseFlash.none=Disabled
|
|
esp32doit-devkit-v1.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32doit-devkit-v1.menu.EraseFlash.all=Enabled
|
|
esp32doit-devkit-v1.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32doit-espduino.name=DOIT ESPduino32
|
|
|
|
esp32doit-espduino.bootloader.tool=esptool_py
|
|
esp32doit-espduino.bootloader.tool.default=esptool_py
|
|
|
|
esp32doit-espduino.upload.tool=esptool_py
|
|
esp32doit-espduino.upload.tool.default=esptool_py
|
|
esp32doit-espduino.upload.tool.network=esp_ota
|
|
|
|
esp32doit-espduino.upload.maximum_size=1310720
|
|
esp32doit-espduino.upload.maximum_data_size=327680
|
|
esp32doit-espduino.upload.wait_for_upload_port=true
|
|
esp32doit-espduino.upload.flags=
|
|
esp32doit-espduino.upload.extra_flags=
|
|
|
|
esp32doit-espduino.serial.disableDTR=true
|
|
esp32doit-espduino.serial.disableRTS=true
|
|
|
|
esp32doit-espduino.build.tarch=xtensa
|
|
esp32doit-espduino.build.bootloader_addr=0x1000
|
|
esp32doit-espduino.build.target=esp32
|
|
esp32doit-espduino.build.mcu=esp32
|
|
esp32doit-espduino.build.core=esp32
|
|
esp32doit-espduino.build.variant=doitESPduino32
|
|
esp32doit-espduino.build.board=ESP32_DEV
|
|
|
|
esp32doit-espduino.build.f_cpu=240000000L
|
|
esp32doit-espduino.build.flash_mode=dio
|
|
esp32doit-espduino.build.flash_size=4MB
|
|
esp32doit-espduino.build.boot=dio
|
|
esp32doit-espduino.build.partitions=default
|
|
esp32doit-espduino.build.defines=
|
|
|
|
esp32doit-espduino.menu.FlashFreq.80=80MHz
|
|
esp32doit-espduino.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32doit-espduino.menu.FlashFreq.40=40MHz
|
|
esp32doit-espduino.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32doit-espduino.menu.PartitionScheme.default=Default
|
|
esp32doit-espduino.menu.PartitionScheme.default.build.partitions=default
|
|
esp32doit-espduino.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
esp32doit-espduino.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32doit-espduino.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32doit-espduino.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
esp32doit-espduino.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32doit-espduino.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
esp32doit-espduino.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
esp32doit-espduino.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
esp32doit-espduino.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
esp32doit-espduino.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32doit-espduino.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
esp32doit-espduino.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32doit-espduino.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
esp32doit-espduino.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32doit-espduino.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
esp32doit-espduino.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
esp32doit-espduino.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
esp32doit-espduino.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32doit-espduino.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
esp32doit-espduino.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
esp32doit-espduino.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
esp32doit-espduino.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32doit-espduino.menu.UploadSpeed.921600=921600
|
|
esp32doit-espduino.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32doit-espduino.menu.UploadSpeed.115200=115200
|
|
esp32doit-espduino.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32doit-espduino.menu.UploadSpeed.256000.windows=256000
|
|
esp32doit-espduino.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32doit-espduino.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32doit-espduino.menu.UploadSpeed.230400=230400
|
|
esp32doit-espduino.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32doit-espduino.menu.UploadSpeed.460800.linux=460800
|
|
esp32doit-espduino.menu.UploadSpeed.460800.macosx=460800
|
|
esp32doit-espduino.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32doit-espduino.menu.UploadSpeed.512000.windows=512000
|
|
esp32doit-espduino.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32doit-espduino.menu.DebugLevel.none=None
|
|
esp32doit-espduino.menu.DebugLevel.none.build.code_debug=0
|
|
esp32doit-espduino.menu.DebugLevel.error=Error
|
|
esp32doit-espduino.menu.DebugLevel.error.build.code_debug=1
|
|
esp32doit-espduino.menu.DebugLevel.warn=Warn
|
|
esp32doit-espduino.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32doit-espduino.menu.DebugLevel.info=Info
|
|
esp32doit-espduino.menu.DebugLevel.info.build.code_debug=3
|
|
esp32doit-espduino.menu.DebugLevel.debug=Debug
|
|
esp32doit-espduino.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32doit-espduino.menu.DebugLevel.verbose=Verbose
|
|
esp32doit-espduino.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32doit-espduino.menu.EraseFlash.none=Disabled
|
|
esp32doit-espduino.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32doit-espduino.menu.EraseFlash.all=Enabled
|
|
esp32doit-espduino.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32-evb.name=OLIMEX ESP32-EVB
|
|
|
|
esp32-evb.bootloader.tool=esptool_py
|
|
esp32-evb.bootloader.tool.default=esptool_py
|
|
|
|
esp32-evb.upload.tool=esptool_py
|
|
esp32-evb.upload.tool.default=esptool_py
|
|
esp32-evb.upload.tool.network=esp_ota
|
|
|
|
esp32-evb.upload.maximum_size=1310720
|
|
esp32-evb.upload.maximum_data_size=327680
|
|
esp32-evb.upload.flags=
|
|
esp32-evb.upload.extra_flags=
|
|
|
|
esp32-evb.serial.disableDTR=true
|
|
esp32-evb.serial.disableRTS=true
|
|
|
|
esp32-evb.build.tarch=xtensa
|
|
esp32-evb.build.bootloader_addr=0x1000
|
|
esp32-evb.build.target=esp32
|
|
esp32-evb.build.mcu=esp32
|
|
esp32-evb.build.core=esp32
|
|
esp32-evb.build.variant=esp32-evb
|
|
esp32-evb.build.board=ESP32_EVB
|
|
|
|
esp32-evb.build.f_cpu=240000000L
|
|
esp32-evb.build.flash_mode=dio
|
|
esp32-evb.build.flash_size=4MB
|
|
esp32-evb.build.boot=dio
|
|
esp32-evb.build.partitions=default
|
|
esp32-evb.build.defines=
|
|
|
|
esp32-evb.menu.FlashFreq.80=80MHz
|
|
esp32-evb.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32-evb.menu.FlashFreq.40=40MHz
|
|
esp32-evb.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32-evb.menu.UploadSpeed.921600=921600
|
|
esp32-evb.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32-evb.menu.UploadSpeed.115200=115200
|
|
esp32-evb.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32-evb.menu.UploadSpeed.256000.windows=256000
|
|
esp32-evb.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32-evb.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32-evb.menu.UploadSpeed.230400=230400
|
|
esp32-evb.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32-evb.menu.UploadSpeed.460800.linux=460800
|
|
esp32-evb.menu.UploadSpeed.460800.macosx=460800
|
|
esp32-evb.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32-evb.menu.UploadSpeed.512000.windows=512000
|
|
esp32-evb.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32-evb.menu.PartitionScheme.default=Default
|
|
esp32-evb.menu.PartitionScheme.default.build.partitions=default
|
|
esp32-evb.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
esp32-evb.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32-evb.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32-evb.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
esp32-evb.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32-evb.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
esp32-evb.menu.DebugLevel.none=None
|
|
esp32-evb.menu.DebugLevel.none.build.code_debug=0
|
|
esp32-evb.menu.DebugLevel.error=Error
|
|
esp32-evb.menu.DebugLevel.error.build.code_debug=1
|
|
esp32-evb.menu.DebugLevel.warn=Warn
|
|
esp32-evb.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32-evb.menu.DebugLevel.info=Info
|
|
esp32-evb.menu.DebugLevel.info.build.code_debug=3
|
|
esp32-evb.menu.DebugLevel.debug=Debug
|
|
esp32-evb.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32-evb.menu.DebugLevel.verbose=Verbose
|
|
esp32-evb.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32-evb.menu.EraseFlash.none=Disabled
|
|
esp32-evb.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32-evb.menu.EraseFlash.all=Enabled
|
|
esp32-evb.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32-gateway.name=OLIMEX ESP32-GATEWAY
|
|
|
|
esp32-gateway.bootloader.tool=esptool_py
|
|
esp32-gateway.bootloader.tool.default=esptool_py
|
|
|
|
esp32-gateway.upload.tool=esptool_py
|
|
esp32-gateway.upload.tool.default=esptool_py
|
|
esp32-gateway.upload.tool.network=esp_ota
|
|
|
|
esp32-gateway.upload.maximum_size=1310720
|
|
esp32-gateway.upload.maximum_data_size=327680
|
|
esp32-gateway.upload.flags=
|
|
esp32-gateway.upload.extra_flags=
|
|
|
|
esp32-gateway.serial.disableDTR=true
|
|
esp32-gateway.serial.disableRTS=true
|
|
|
|
esp32-gateway.build.tarch=xtensa
|
|
esp32-gateway.build.bootloader_addr=0x1000
|
|
esp32-gateway.build.target=esp32
|
|
esp32-gateway.build.mcu=esp32
|
|
esp32-gateway.build.core=esp32
|
|
esp32-gateway.build.variant=esp32-gateway
|
|
esp32-gateway.build.board=ESP32_GATEWAY
|
|
esp32-gateway.menu.Revision.RevC=Revision C or older
|
|
esp32-gateway.menu.Revision.RevC.build.board=ESP32_GATEWAY_C
|
|
esp32-gateway.menu.Revision.RevE=Revision E
|
|
esp32-gateway.menu.Revision.RevE.build.board=ESP32_GATEWAY_E
|
|
esp32-gateway.menu.Revision.RevF=Revision F or newer
|
|
esp32-gateway.menu.Revision.RevF.build.board=ESP32_GATEWAY_F
|
|
|
|
esp32-gateway.build.f_cpu=240000000L
|
|
esp32-gateway.build.flash_mode=dio
|
|
esp32-gateway.build.flash_size=4MB
|
|
esp32-gateway.build.boot=dio
|
|
esp32-gateway.build.partitions=default
|
|
esp32-gateway.build.defines=
|
|
|
|
esp32-gateway.menu.FlashFreq.80=80MHz
|
|
esp32-gateway.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32-gateway.menu.FlashFreq.40=40MHz
|
|
esp32-gateway.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32-gateway.menu.UploadSpeed.921600=921600
|
|
esp32-gateway.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32-gateway.menu.UploadSpeed.115200=115200
|
|
esp32-gateway.menu.UploadSpeed.115200.upload.speed=115200
|
|
|
|
esp32-gateway.menu.PartitionScheme.default=Default
|
|
esp32-gateway.menu.PartitionScheme.default.build.partitions=default
|
|
esp32-gateway.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
esp32-gateway.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32-gateway.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32-gateway.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
esp32-gateway.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32-gateway.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
esp32-gateway.menu.DebugLevel.none=None
|
|
esp32-gateway.menu.DebugLevel.none.build.code_debug=0
|
|
esp32-gateway.menu.DebugLevel.error=Error
|
|
esp32-gateway.menu.DebugLevel.error.build.code_debug=1
|
|
esp32-gateway.menu.DebugLevel.warn=Warn
|
|
esp32-gateway.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32-gateway.menu.DebugLevel.info=Info
|
|
esp32-gateway.menu.DebugLevel.info.build.code_debug=3
|
|
esp32-gateway.menu.DebugLevel.debug=Debug
|
|
esp32-gateway.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32-gateway.menu.DebugLevel.verbose=Verbose
|
|
esp32-gateway.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32-gateway.menu.EraseFlash.none=Disabled
|
|
esp32-gateway.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32-gateway.menu.EraseFlash.all=Enabled
|
|
esp32-gateway.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32-poe.name=OLIMEX ESP32-POE
|
|
|
|
esp32-poe.bootloader.tool=esptool_py
|
|
esp32-poe.bootloader.tool.default=esptool_py
|
|
|
|
esp32-poe.upload.tool=esptool_py
|
|
esp32-poe.upload.tool.default=esptool_py
|
|
esp32-poe.upload.tool.network=esp_ota
|
|
|
|
esp32-poe.upload.maximum_size=1310720
|
|
esp32-poe.upload.maximum_data_size=327680
|
|
esp32-poe.upload.flags=
|
|
esp32-poe.upload.extra_flags=
|
|
|
|
esp32-poe.serial.disableDTR=true
|
|
esp32-poe.serial.disableRTS=true
|
|
|
|
esp32-poe.build.tarch=xtensa
|
|
esp32-poe.build.bootloader_addr=0x1000
|
|
esp32-poe.build.target=esp32
|
|
esp32-poe.build.mcu=esp32
|
|
esp32-poe.build.core=esp32
|
|
esp32-poe.build.variant=esp32-poe
|
|
esp32-poe.build.board=ESP32_POE
|
|
|
|
esp32-poe.build.f_cpu=240000000L
|
|
esp32-poe.build.flash_size=4MB
|
|
esp32-poe.build.flash_freq=40m
|
|
esp32-poe.build.flash_mode=dio
|
|
esp32-poe.build.boot=dio
|
|
esp32-poe.build.partitions=default
|
|
esp32-poe.build.defines=
|
|
esp32-poe.build.loop_core=
|
|
esp32-poe.build.event_core=
|
|
|
|
esp32-poe.menu.PSRAM.disabled=Disabled (WROOM)
|
|
esp32-poe.menu.PSRAM.disabled.build.defines=
|
|
esp32-poe.menu.PSRAM.disabled.build.extra_libs=
|
|
esp32-poe.menu.PSRAM.enabled=Enabled (WROVER)
|
|
esp32-poe.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
esp32-poe.menu.PSRAM.enabled.build.extra_libs=
|
|
|
|
esp32-poe.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32-poe.menu.PartitionScheme.default.build.partitions=default
|
|
esp32-poe.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32-poe.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32-poe.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32-poe.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32-poe.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32-poe.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32-poe.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32-poe.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32-poe.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32-poe.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32-poe.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32-poe.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32-poe.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32-poe.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32-poe.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32-poe.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32-poe.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32-poe.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32-poe.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32-poe.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32-poe.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32-poe.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32-poe.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32-poe.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32-poe.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32-poe.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32-poe.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32-poe.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32-poe.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32-poe.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32-poe.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
esp32-poe.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32-poe.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32-poe.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32-poe.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32-poe.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32-poe.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32-poe.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
esp32-poe.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
esp32-poe.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
esp32-poe.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
esp32-poe.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
esp32-poe.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
esp32-poe.menu.PartitionScheme.custom=Custom
|
|
esp32-poe.menu.PartitionScheme.custom.build.partitions=
|
|
esp32-poe.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32-poe.menu.FlashMode.qio=QIO
|
|
esp32-poe.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32-poe.menu.FlashMode.qio.build.boot=qio
|
|
esp32-poe.menu.FlashMode.dio=DIO
|
|
esp32-poe.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32-poe.menu.FlashMode.dio.build.boot=dio
|
|
|
|
esp32-poe.menu.FlashFreq.80=80MHz
|
|
esp32-poe.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32-poe.menu.FlashFreq.40=40MHz
|
|
esp32-poe.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32-poe.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32-poe.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32-poe.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32-poe.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
esp32-poe.menu.UploadSpeed.921600=921600
|
|
esp32-poe.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32-poe.menu.UploadSpeed.115200=115200
|
|
esp32-poe.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32-poe.menu.UploadSpeed.256000.windows=256000
|
|
esp32-poe.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32-poe.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32-poe.menu.UploadSpeed.230400=230400
|
|
esp32-poe.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32-poe.menu.UploadSpeed.460800.linux=460800
|
|
esp32-poe.menu.UploadSpeed.460800.macosx=460800
|
|
esp32-poe.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32-poe.menu.UploadSpeed.512000.windows=512000
|
|
esp32-poe.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32-poe.menu.DebugLevel.none=None
|
|
esp32-poe.menu.DebugLevel.none.build.code_debug=0
|
|
esp32-poe.menu.DebugLevel.error=Error
|
|
esp32-poe.menu.DebugLevel.error.build.code_debug=1
|
|
esp32-poe.menu.DebugLevel.warn=Warn
|
|
esp32-poe.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32-poe.menu.DebugLevel.info=Info
|
|
esp32-poe.menu.DebugLevel.info.build.code_debug=3
|
|
esp32-poe.menu.DebugLevel.debug=Debug
|
|
esp32-poe.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32-poe.menu.DebugLevel.verbose=Verbose
|
|
esp32-poe.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32-poe.menu.EraseFlash.none=Disabled
|
|
esp32-poe.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32-poe.menu.EraseFlash.all=Enabled
|
|
esp32-poe.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32-poe-iso.name=OLIMEX ESP32-POE-ISO
|
|
|
|
esp32-poe-iso.bootloader.tool=esptool_py
|
|
esp32-poe-iso.bootloader.tool.default=esptool_py
|
|
|
|
esp32-poe-iso.upload.tool=esptool_py
|
|
esp32-poe-iso.upload.tool.default=esptool_py
|
|
esp32-poe-iso.upload.tool.network=esp_ota
|
|
|
|
esp32-poe-iso.upload.maximum_size=1310720
|
|
esp32-poe-iso.upload.maximum_data_size=327680
|
|
esp32-poe-iso.upload.flags=
|
|
esp32-poe-iso.upload.extra_flags=
|
|
|
|
esp32-poe-iso.serial.disableDTR=true
|
|
esp32-poe-iso.serial.disableRTS=true
|
|
|
|
esp32-poe-iso.build.tarch=xtensa
|
|
esp32-poe-iso.build.bootloader_addr=0x1000
|
|
esp32-poe-iso.build.target=esp32
|
|
esp32-poe-iso.build.mcu=esp32
|
|
esp32-poe-iso.build.core=esp32
|
|
esp32-poe-iso.build.variant=esp32-poe-iso
|
|
esp32-poe-iso.build.board=ESP32_POE_ISO
|
|
|
|
esp32-poe-iso.build.f_cpu=240000000L
|
|
esp32-poe-iso.build.flash_size=4MB
|
|
esp32-poe-iso.build.flash_freq=40m
|
|
esp32-poe-iso.build.flash_mode=dio
|
|
esp32-poe-iso.build.boot=dio
|
|
esp32-poe-iso.build.partitions=default
|
|
esp32-poe-iso.build.defines=
|
|
esp32-poe-iso.build.loop_core=
|
|
esp32-poe-iso.build.event_core=
|
|
|
|
esp32-poe-iso.menu.PSRAM.disabled=Disabled (WROOM)
|
|
esp32-poe-iso.menu.PSRAM.disabled.build.defines=
|
|
esp32-poe-iso.menu.PSRAM.disabled.build.extra_libs=
|
|
esp32-poe-iso.menu.PSRAM.enabled=Enabled (WROVER)
|
|
esp32-poe-iso.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
esp32-poe-iso.menu.PSRAM.enabled.build.extra_libs=
|
|
|
|
esp32-poe-iso.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32-poe-iso.menu.PartitionScheme.default.build.partitions=default
|
|
esp32-poe-iso.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32-poe-iso.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32-poe-iso.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32-poe-iso.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32-poe-iso.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32-poe-iso.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32-poe-iso.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32-poe-iso.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32-poe-iso.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32-poe-iso.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32-poe-iso.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32-poe-iso.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32-poe-iso.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32-poe-iso.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32-poe-iso.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32-poe-iso.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32-poe-iso.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32-poe-iso.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32-poe-iso.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32-poe-iso.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32-poe-iso.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32-poe-iso.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32-poe-iso.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32-poe-iso.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32-poe-iso.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32-poe-iso.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32-poe-iso.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32-poe-iso.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32-poe-iso.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32-poe-iso.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32-poe-iso.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
esp32-poe-iso.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32-poe-iso.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32-poe-iso.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32-poe-iso.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32-poe-iso.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32-poe-iso.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32-poe-iso.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
esp32-poe-iso.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
esp32-poe-iso.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
esp32-poe-iso.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
esp32-poe-iso.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
esp32-poe-iso.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
esp32-poe-iso.menu.PartitionScheme.custom=Custom
|
|
esp32-poe-iso.menu.PartitionScheme.custom.build.partitions=
|
|
esp32-poe-iso.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32-poe-iso.menu.FlashMode.qio=QIO
|
|
esp32-poe-iso.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32-poe-iso.menu.FlashMode.qio.build.boot=qio
|
|
esp32-poe-iso.menu.FlashMode.dio=DIO
|
|
esp32-poe-iso.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32-poe-iso.menu.FlashMode.dio.build.boot=dio
|
|
|
|
esp32-poe-iso.menu.FlashFreq.80=80MHz
|
|
esp32-poe-iso.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32-poe-iso.menu.FlashFreq.40=40MHz
|
|
esp32-poe-iso.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32-poe-iso.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32-poe-iso.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32-poe-iso.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32-poe-iso.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
esp32-poe-iso.menu.UploadSpeed.921600=921600
|
|
esp32-poe-iso.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32-poe-iso.menu.UploadSpeed.115200=115200
|
|
esp32-poe-iso.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32-poe-iso.menu.UploadSpeed.256000.windows=256000
|
|
esp32-poe-iso.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32-poe-iso.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32-poe-iso.menu.UploadSpeed.230400=230400
|
|
esp32-poe-iso.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32-poe-iso.menu.UploadSpeed.460800.linux=460800
|
|
esp32-poe-iso.menu.UploadSpeed.460800.macosx=460800
|
|
esp32-poe-iso.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32-poe-iso.menu.UploadSpeed.512000.windows=512000
|
|
esp32-poe-iso.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32-poe-iso.menu.DebugLevel.none=None
|
|
esp32-poe-iso.menu.DebugLevel.none.build.code_debug=0
|
|
esp32-poe-iso.menu.DebugLevel.error=Error
|
|
esp32-poe-iso.menu.DebugLevel.error.build.code_debug=1
|
|
esp32-poe-iso.menu.DebugLevel.warn=Warn
|
|
esp32-poe-iso.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32-poe-iso.menu.DebugLevel.info=Info
|
|
esp32-poe-iso.menu.DebugLevel.info.build.code_debug=3
|
|
esp32-poe-iso.menu.DebugLevel.debug=Debug
|
|
esp32-poe-iso.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32-poe-iso.menu.DebugLevel.verbose=Verbose
|
|
esp32-poe-iso.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32-poe-iso.menu.EraseFlash.none=Disabled
|
|
esp32-poe-iso.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32-poe-iso.menu.EraseFlash.all=Enabled
|
|
esp32-poe-iso.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32-devkitlipo.name=OLIMEX ESP32-DevKit-LiPo
|
|
|
|
esp32-devkitlipo.bootloader.tool=esptool_py
|
|
esp32-devkitlipo.bootloader.tool.default=esptool_py
|
|
|
|
esp32-devkitlipo.upload.tool=esptool_py
|
|
esp32-devkitlipo.upload.tool.default=esptool_py
|
|
esp32-devkitlipo.upload.tool.network=esp_ota
|
|
|
|
esp32-devkitlipo.upload.maximum_size=1310720
|
|
esp32-devkitlipo.upload.maximum_data_size=327680
|
|
esp32-devkitlipo.upload.flags=
|
|
esp32-devkitlipo.upload.extra_flags=
|
|
|
|
esp32-devkitlipo.serial.disableDTR=true
|
|
esp32-devkitlipo.serial.disableRTS=true
|
|
|
|
esp32-devkitlipo.build.tarch=xtensa
|
|
esp32-devkitlipo.build.bootloader_addr=0x1000
|
|
esp32-devkitlipo.build.target=esp32
|
|
esp32-devkitlipo.build.mcu=esp32
|
|
esp32-devkitlipo.build.core=esp32
|
|
esp32-devkitlipo.build.variant=esp32-devkit-lipo
|
|
esp32-devkitlipo.build.board=ESP32_DEVKIT_LIPO
|
|
|
|
esp32-devkitlipo.build.f_cpu=240000000L
|
|
esp32-devkitlipo.build.flash_size=4MB
|
|
esp32-devkitlipo.build.flash_freq=40m
|
|
esp32-devkitlipo.build.flash_mode=dio
|
|
esp32-devkitlipo.build.boot=dio
|
|
esp32-devkitlipo.build.partitions=default
|
|
esp32-devkitlipo.build.defines=
|
|
|
|
esp32-devkitlipo.menu.PSRAM.disabled=Disabled (WROOM)
|
|
esp32-devkitlipo.menu.PSRAM.disabled.build.defines=
|
|
esp32-devkitlipo.menu.PSRAM.disabled.build.extra_libs=
|
|
esp32-devkitlipo.menu.PSRAM.enabled=Enabled (WROVER)
|
|
esp32-devkitlipo.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
esp32-devkitlipo.menu.PSRAM.enabled.build.extra_libs=
|
|
|
|
esp32-devkitlipo.menu.PartitionScheme.default=Default
|
|
esp32-devkitlipo.menu.PartitionScheme.default.build.partitions=default
|
|
esp32-devkitlipo.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
|
|
esp32-devkitlipo.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32-devkitlipo.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
esp32-devkitlipo.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32-devkitlipo.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32-devkitlipo.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA)
|
|
esp32-devkitlipo.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32-devkitlipo.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32-devkitlipo.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
esp32-devkitlipo.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32-devkitlipo.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32-devkitlipo.menu.PartitionScheme.fatflash=16M Fat
|
|
esp32-devkitlipo.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
|
|
esp32-devkitlipo.menu.FlashMode.qio=QIO
|
|
esp32-devkitlipo.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32-devkitlipo.menu.FlashMode.qio.build.boot=qio
|
|
esp32-devkitlipo.menu.FlashMode.dio=DIO
|
|
esp32-devkitlipo.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32-devkitlipo.menu.FlashMode.dio.build.boot=dio
|
|
|
|
esp32-devkitlipo.menu.FlashFreq.80=80MHz
|
|
esp32-devkitlipo.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32-devkitlipo.menu.FlashFreq.40=40MHz
|
|
esp32-devkitlipo.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32-devkitlipo.menu.UploadSpeed.921600=921600
|
|
esp32-devkitlipo.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32-devkitlipo.menu.UploadSpeed.115200=115200
|
|
esp32-devkitlipo.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32-devkitlipo.menu.UploadSpeed.256000.windows=256000
|
|
esp32-devkitlipo.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32-devkitlipo.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32-devkitlipo.menu.UploadSpeed.230400=230400
|
|
esp32-devkitlipo.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32-devkitlipo.menu.UploadSpeed.460800.linux=460800
|
|
esp32-devkitlipo.menu.UploadSpeed.460800.macosx=460800
|
|
esp32-devkitlipo.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32-devkitlipo.menu.UploadSpeed.512000.windows=512000
|
|
esp32-devkitlipo.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32-devkitlipo.menu.DebugLevel.none=None
|
|
esp32-devkitlipo.menu.DebugLevel.none.build.code_debug=0
|
|
esp32-devkitlipo.menu.DebugLevel.error=Error
|
|
esp32-devkitlipo.menu.DebugLevel.error.build.code_debug=1
|
|
esp32-devkitlipo.menu.DebugLevel.warn=Warn
|
|
esp32-devkitlipo.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32-devkitlipo.menu.DebugLevel.info=Info
|
|
esp32-devkitlipo.menu.DebugLevel.info.build.code_debug=3
|
|
esp32-devkitlipo.menu.DebugLevel.debug=Debug
|
|
esp32-devkitlipo.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32-devkitlipo.menu.DebugLevel.verbose=Verbose
|
|
esp32-devkitlipo.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32-devkitlipo.menu.EraseFlash.none=Disabled
|
|
esp32-devkitlipo.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32-devkitlipo.menu.EraseFlash.all=Enabled
|
|
esp32-devkitlipo.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32s2-devkitlipo.name=OLIMEX ESP32-S2-DevKit-Lipo
|
|
|
|
esp32s2-devkitlipo.bootloader.tool=esptool_py
|
|
esp32s2-devkitlipo.bootloader.tool.default=esptool_py
|
|
|
|
esp32s2-devkitlipo.upload.tool=esptool_py
|
|
esp32s2-devkitlipo.upload.tool.default=esptool_py
|
|
esp32s2-devkitlipo.upload.tool.network=esp_ota
|
|
|
|
esp32s2-devkitlipo.upload.maximum_size=1310720
|
|
esp32s2-devkitlipo.upload.maximum_data_size=327680
|
|
esp32s2-devkitlipo.upload.flags=
|
|
esp32s2-devkitlipo.upload.extra_flags=
|
|
esp32s2-devkitlipo.upload.use_1200bps_touch=false
|
|
esp32s2-devkitlipo.upload.wait_for_upload_port=false
|
|
|
|
esp32s2-devkitlipo.serial.disableDTR=false
|
|
esp32s2-devkitlipo.serial.disableRTS=false
|
|
|
|
esp32s2-devkitlipo.build.tarch=xtensa
|
|
esp32s2-devkitlipo.build.bootloader_addr=0x1000
|
|
esp32s2-devkitlipo.build.target=esp32s2
|
|
esp32s2-devkitlipo.build.mcu=esp32s2
|
|
esp32s2-devkitlipo.build.core=esp32
|
|
esp32s2-devkitlipo.build.variant=esp32s2-devkit-lipo
|
|
esp32s2-devkitlipo.build.board=ESP32S2_DEVKIT_LIPO
|
|
|
|
esp32s2-devkitlipo.build.cdc_on_boot=0
|
|
esp32s2-devkitlipo.build.msc_on_boot=0
|
|
esp32s2-devkitlipo.build.dfu_on_boot=0
|
|
esp32s2-devkitlipo.build.f_cpu=240000000L
|
|
esp32s2-devkitlipo.build.flash_size=4MB
|
|
esp32s2-devkitlipo.build.flash_freq=80m
|
|
esp32s2-devkitlipo.build.flash_mode=dio
|
|
esp32s2-devkitlipo.build.boot=qio
|
|
esp32s2-devkitlipo.build.partitions=default
|
|
esp32s2-devkitlipo.build.defines=
|
|
|
|
esp32s2-devkitlipo.menu.JTAGAdapter.default=Disabled
|
|
esp32s2-devkitlipo.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
esp32s2-devkitlipo.menu.JTAGAdapter.external=FTDI Adapter
|
|
esp32s2-devkitlipo.menu.JTAGAdapter.external.build.openocdscript=esp32s2-kaluga-1.cfg
|
|
esp32s2-devkitlipo.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
esp32s2-devkitlipo.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
esp32s2-devkitlipo.menu.JTAGAdapter.bridge.build.openocdscript=esp32s2-bridge.cfg
|
|
esp32s2-devkitlipo.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
esp32s2-devkitlipo.menu.CDCOnBoot.default=Disabled
|
|
esp32s2-devkitlipo.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
esp32s2-devkitlipo.menu.CDCOnBoot.cdc=Enabled
|
|
esp32s2-devkitlipo.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
esp32s2-devkitlipo.menu.MSCOnBoot.default=Disabled
|
|
esp32s2-devkitlipo.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
esp32s2-devkitlipo.menu.MSCOnBoot.msc=Enabled
|
|
esp32s2-devkitlipo.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
esp32s2-devkitlipo.menu.DFUOnBoot.default=Disabled
|
|
esp32s2-devkitlipo.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
esp32s2-devkitlipo.menu.DFUOnBoot.dfu=Enabled
|
|
esp32s2-devkitlipo.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
esp32s2-devkitlipo.menu.UploadMode.default=UART0
|
|
esp32s2-devkitlipo.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
esp32s2-devkitlipo.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
esp32s2-devkitlipo.menu.UploadMode.cdc=Internal USB
|
|
esp32s2-devkitlipo.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
esp32s2-devkitlipo.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
esp32s2-devkitlipo.menu.PSRAM.disabled=Disabled (WROOM)
|
|
esp32s2-devkitlipo.menu.PSRAM.disabled.build.defines=
|
|
esp32s2-devkitlipo.menu.PSRAM.enabled=Enabled (WROVER)
|
|
esp32s2-devkitlipo.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
|
|
esp32s2-devkitlipo.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32s2-devkitlipo.menu.PartitionScheme.default.build.partitions=default
|
|
esp32s2-devkitlipo.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32s2-devkitlipo.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32s2-devkitlipo.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32s2-devkitlipo.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32s2-devkitlipo.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32s2-devkitlipo.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32s2-devkitlipo.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32s2-devkitlipo.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32s2-devkitlipo.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32s2-devkitlipo.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32s2-devkitlipo.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32s2-devkitlipo.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32s2-devkitlipo.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32s2-devkitlipo.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32s2-devkitlipo.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32s2-devkitlipo.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32s2-devkitlipo.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32s2-devkitlipo.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32s2-devkitlipo.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32s2-devkitlipo.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32s2-devkitlipo.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32s2-devkitlipo.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32s2-devkitlipo.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32s2-devkitlipo.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32s2-devkitlipo.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32s2-devkitlipo.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32s2-devkitlipo.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32s2-devkitlipo.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32s2-devkitlipo.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32s2-devkitlipo.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32s2-devkitlipo.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
esp32s2-devkitlipo.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32s2-devkitlipo.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32s2-devkitlipo.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32s2-devkitlipo.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32s2-devkitlipo.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32s2-devkitlipo.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32s2-devkitlipo.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
esp32s2-devkitlipo.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
esp32s2-devkitlipo.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
esp32s2-devkitlipo.menu.PartitionScheme.custom=Custom
|
|
esp32s2-devkitlipo.menu.PartitionScheme.custom.build.partitions=
|
|
esp32s2-devkitlipo.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32s2-devkitlipo.menu.CPUFreq.240=240MHz (WiFi)
|
|
esp32s2-devkitlipo.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
esp32s2-devkitlipo.menu.CPUFreq.160=160MHz (WiFi)
|
|
esp32s2-devkitlipo.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32s2-devkitlipo.menu.CPUFreq.80=80MHz (WiFi)
|
|
esp32s2-devkitlipo.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32s2-devkitlipo.menu.CPUFreq.40=40MHz
|
|
esp32s2-devkitlipo.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32s2-devkitlipo.menu.CPUFreq.20=20MHz
|
|
esp32s2-devkitlipo.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32s2-devkitlipo.menu.CPUFreq.10=10MHz
|
|
esp32s2-devkitlipo.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32s2-devkitlipo.menu.FlashMode.qio=QIO
|
|
esp32s2-devkitlipo.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32s2-devkitlipo.menu.FlashMode.qio.build.boot=qio
|
|
esp32s2-devkitlipo.menu.FlashMode.dio=DIO
|
|
esp32s2-devkitlipo.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32s2-devkitlipo.menu.FlashMode.dio.build.boot=dio
|
|
esp32s2-devkitlipo.menu.FlashMode.qout=QOUT
|
|
esp32s2-devkitlipo.menu.FlashMode.qout.build.flash_mode=dout
|
|
esp32s2-devkitlipo.menu.FlashMode.qout.build.boot=qout
|
|
esp32s2-devkitlipo.menu.FlashMode.dout=DOUT
|
|
esp32s2-devkitlipo.menu.FlashMode.dout.build.flash_mode=dout
|
|
esp32s2-devkitlipo.menu.FlashMode.dout.build.boot=dout
|
|
|
|
esp32s2-devkitlipo.menu.FlashFreq.80=80MHz
|
|
esp32s2-devkitlipo.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32s2-devkitlipo.menu.FlashFreq.40=40MHz
|
|
esp32s2-devkitlipo.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32s2-devkitlipo.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32s2-devkitlipo.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32s2-devkitlipo.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32s2-devkitlipo.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32s2-devkitlipo.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32s2-devkitlipo.menu.FlashSize.2M=2MB (16Mb)
|
|
esp32s2-devkitlipo.menu.FlashSize.2M.build.flash_size=2MB
|
|
esp32s2-devkitlipo.menu.FlashSize.2M.build.partitions=minimal
|
|
esp32s2-devkitlipo.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32s2-devkitlipo.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
esp32s2-devkitlipo.menu.UploadSpeed.921600=921600
|
|
esp32s2-devkitlipo.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32s2-devkitlipo.menu.UploadSpeed.115200=115200
|
|
esp32s2-devkitlipo.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32s2-devkitlipo.menu.UploadSpeed.256000.windows=256000
|
|
esp32s2-devkitlipo.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32s2-devkitlipo.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32s2-devkitlipo.menu.UploadSpeed.230400=230400
|
|
esp32s2-devkitlipo.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32s2-devkitlipo.menu.UploadSpeed.460800.linux=460800
|
|
esp32s2-devkitlipo.menu.UploadSpeed.460800.macosx=460800
|
|
esp32s2-devkitlipo.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32s2-devkitlipo.menu.UploadSpeed.512000.windows=512000
|
|
esp32s2-devkitlipo.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32s2-devkitlipo.menu.DebugLevel.none=None
|
|
esp32s2-devkitlipo.menu.DebugLevel.none.build.code_debug=0
|
|
esp32s2-devkitlipo.menu.DebugLevel.error=Error
|
|
esp32s2-devkitlipo.menu.DebugLevel.error.build.code_debug=1
|
|
esp32s2-devkitlipo.menu.DebugLevel.warn=Warn
|
|
esp32s2-devkitlipo.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32s2-devkitlipo.menu.DebugLevel.info=Info
|
|
esp32s2-devkitlipo.menu.DebugLevel.info.build.code_debug=3
|
|
esp32s2-devkitlipo.menu.DebugLevel.debug=Debug
|
|
esp32s2-devkitlipo.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32s2-devkitlipo.menu.DebugLevel.verbose=Verbose
|
|
esp32s2-devkitlipo.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32s2-devkitlipo.menu.EraseFlash.none=Disabled
|
|
esp32s2-devkitlipo.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32s2-devkitlipo.menu.EraseFlash.all=Enabled
|
|
esp32s2-devkitlipo.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32s2-devkitlipo-usb.name=OLIMEX ESP32-S2-DevKit-Lipo-USB
|
|
|
|
esp32s2-devkitlipo-usb.bootloader.tool=esptool_py
|
|
esp32s2-devkitlipo-usb.bootloader.tool.default=esptool_py
|
|
|
|
esp32s2-devkitlipo-usb.upload.tool=esptool_py
|
|
esp32s2-devkitlipo-usb.upload.tool.default=esptool_py
|
|
esp32s2-devkitlipo-usb.upload.tool.network=esp_ota
|
|
|
|
esp32s2-devkitlipo-usb.upload.maximum_size=1310720
|
|
esp32s2-devkitlipo-usb.upload.maximum_data_size=327680
|
|
esp32s2-devkitlipo-usb.upload.flags=
|
|
esp32s2-devkitlipo-usb.upload.extra_flags=
|
|
esp32s2-devkitlipo-usb.upload.use_1200bps_touch=false
|
|
esp32s2-devkitlipo-usb.upload.wait_for_upload_port=false
|
|
|
|
esp32s2-devkitlipo-usb.serial.disableDTR=false
|
|
esp32s2-devkitlipo-usb.serial.disableRTS=false
|
|
|
|
esp32s2-devkitlipo-usb.build.tarch=xtensa
|
|
esp32s2-devkitlipo-usb.build.bootloader_addr=0x1000
|
|
esp32s2-devkitlipo-usb.build.target=esp32s2
|
|
esp32s2-devkitlipo-usb.build.mcu=esp32s2
|
|
esp32s2-devkitlipo-usb.build.core=esp32
|
|
esp32s2-devkitlipo-usb.build.variant=esp32s2-devkit-lipo-usb
|
|
esp32s2-devkitlipo-usb.build.board=ESP32S2_DEVKIT_LIPO_USB
|
|
|
|
esp32s2-devkitlipo-usb.build.cdc_on_boot=0
|
|
esp32s2-devkitlipo-usb.build.msc_on_boot=0
|
|
esp32s2-devkitlipo-usb.build.dfu_on_boot=0
|
|
esp32s2-devkitlipo-usb.build.f_cpu=240000000L
|
|
esp32s2-devkitlipo-usb.build.flash_size=4MB
|
|
esp32s2-devkitlipo-usb.build.flash_freq=80m
|
|
esp32s2-devkitlipo-usb.build.flash_mode=dio
|
|
esp32s2-devkitlipo-usb.build.boot=qio
|
|
esp32s2-devkitlipo-usb.build.partitions=default
|
|
esp32s2-devkitlipo-usb.build.defines=
|
|
|
|
esp32s2-devkitlipo-usb.menu.JTAGAdapter.default=Disabled
|
|
esp32s2-devkitlipo-usb.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
esp32s2-devkitlipo-usb.menu.JTAGAdapter.external=FTDI Adapter
|
|
esp32s2-devkitlipo-usb.menu.JTAGAdapter.external.build.openocdscript=esp32s2-kaluga-1.cfg
|
|
esp32s2-devkitlipo-usb.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
esp32s2-devkitlipo-usb.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
esp32s2-devkitlipo-usb.menu.JTAGAdapter.bridge.build.openocdscript=esp32s2-bridge.cfg
|
|
esp32s2-devkitlipo-usb.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
esp32s2-devkitlipo-usb.menu.CDCOnBoot.default=Enabled
|
|
esp32s2-devkitlipo-usb.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
esp32s2-devkitlipo-usb.menu.CDCOnBoot.cdc=Disabled
|
|
esp32s2-devkitlipo-usb.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
|
|
|
|
esp32s2-devkitlipo-usb.menu.MSCOnBoot.default=Disabled
|
|
esp32s2-devkitlipo-usb.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
esp32s2-devkitlipo-usb.menu.MSCOnBoot.msc=Enabled
|
|
esp32s2-devkitlipo-usb.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
esp32s2-devkitlipo-usb.menu.DFUOnBoot.default=Enabled
|
|
esp32s2-devkitlipo-usb.menu.DFUOnBoot.default.build.dfu_on_boot=1
|
|
esp32s2-devkitlipo-usb.menu.DFUOnBoot.dfu=Disabled
|
|
esp32s2-devkitlipo-usb.menu.DFUOnBoot.dfu.build.dfu_on_boot=0
|
|
|
|
esp32s2-devkitlipo-usb.menu.UploadMode.default=Internal USB
|
|
esp32s2-devkitlipo-usb.menu.UploadMode.default.upload.use_1200bps_touch=true
|
|
esp32s2-devkitlipo-usb.menu.UploadMode.default.upload.wait_for_upload_port=true
|
|
esp32s2-devkitlipo-usb.menu.UploadMode.UART0=UART0
|
|
esp32s2-devkitlipo-usb.menu.UploadMode.UART0.upload.use_1200bps_touch=false
|
|
esp32s2-devkitlipo-usb.menu.UploadMode.UART0.upload.wait_for_upload_port=false
|
|
|
|
esp32s2-devkitlipo-usb.menu.PSRAM.disabled=Disabled (WROOM)
|
|
esp32s2-devkitlipo-usb.menu.PSRAM.disabled.build.defines=
|
|
esp32s2-devkitlipo-usb.menu.PSRAM.enabled=Enabled (WROVER)
|
|
esp32s2-devkitlipo-usb.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.default.build.partitions=default
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.custom=Custom
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.custom.build.partitions=
|
|
esp32s2-devkitlipo-usb.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32s2-devkitlipo-usb.menu.CPUFreq.240=240MHz (WiFi)
|
|
esp32s2-devkitlipo-usb.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
esp32s2-devkitlipo-usb.menu.CPUFreq.160=160MHz (WiFi)
|
|
esp32s2-devkitlipo-usb.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32s2-devkitlipo-usb.menu.CPUFreq.80=80MHz (WiFi)
|
|
esp32s2-devkitlipo-usb.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32s2-devkitlipo-usb.menu.CPUFreq.40=40MHz
|
|
esp32s2-devkitlipo-usb.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32s2-devkitlipo-usb.menu.CPUFreq.20=20MHz
|
|
esp32s2-devkitlipo-usb.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32s2-devkitlipo-usb.menu.CPUFreq.10=10MHz
|
|
esp32s2-devkitlipo-usb.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32s2-devkitlipo-usb.menu.FlashMode.qio=QIO
|
|
esp32s2-devkitlipo-usb.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32s2-devkitlipo-usb.menu.FlashMode.qio.build.boot=qio
|
|
esp32s2-devkitlipo-usb.menu.FlashMode.dio=DIO
|
|
esp32s2-devkitlipo-usb.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32s2-devkitlipo-usb.menu.FlashMode.dio.build.boot=dio
|
|
esp32s2-devkitlipo-usb.menu.FlashMode.qout=QOUT
|
|
esp32s2-devkitlipo-usb.menu.FlashMode.qout.build.flash_mode=dout
|
|
esp32s2-devkitlipo-usb.menu.FlashMode.qout.build.boot=qout
|
|
esp32s2-devkitlipo-usb.menu.FlashMode.dout=DOUT
|
|
esp32s2-devkitlipo-usb.menu.FlashMode.dout.build.flash_mode=dout
|
|
esp32s2-devkitlipo-usb.menu.FlashMode.dout.build.boot=dout
|
|
|
|
esp32s2-devkitlipo-usb.menu.FlashFreq.80=80MHz
|
|
esp32s2-devkitlipo-usb.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32s2-devkitlipo-usb.menu.FlashFreq.40=40MHz
|
|
esp32s2-devkitlipo-usb.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32s2-devkitlipo-usb.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32s2-devkitlipo-usb.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32s2-devkitlipo-usb.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32s2-devkitlipo-usb.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32s2-devkitlipo-usb.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32s2-devkitlipo-usb.menu.FlashSize.2M=2MB (16Mb)
|
|
esp32s2-devkitlipo-usb.menu.FlashSize.2M.build.flash_size=2MB
|
|
esp32s2-devkitlipo-usb.menu.FlashSize.2M.build.partitions=minimal
|
|
esp32s2-devkitlipo-usb.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32s2-devkitlipo-usb.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
esp32s2-devkitlipo-usb.menu.UploadSpeed.921600=921600
|
|
esp32s2-devkitlipo-usb.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32s2-devkitlipo-usb.menu.UploadSpeed.115200=115200
|
|
esp32s2-devkitlipo-usb.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32s2-devkitlipo-usb.menu.UploadSpeed.256000.windows=256000
|
|
esp32s2-devkitlipo-usb.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32s2-devkitlipo-usb.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32s2-devkitlipo-usb.menu.UploadSpeed.230400=230400
|
|
esp32s2-devkitlipo-usb.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32s2-devkitlipo-usb.menu.UploadSpeed.460800.linux=460800
|
|
esp32s2-devkitlipo-usb.menu.UploadSpeed.460800.macosx=460800
|
|
esp32s2-devkitlipo-usb.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32s2-devkitlipo-usb.menu.UploadSpeed.512000.windows=512000
|
|
esp32s2-devkitlipo-usb.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32s2-devkitlipo-usb.menu.DebugLevel.none=None
|
|
esp32s2-devkitlipo-usb.menu.DebugLevel.none.build.code_debug=0
|
|
esp32s2-devkitlipo-usb.menu.DebugLevel.error=Error
|
|
esp32s2-devkitlipo-usb.menu.DebugLevel.error.build.code_debug=1
|
|
esp32s2-devkitlipo-usb.menu.DebugLevel.warn=Warn
|
|
esp32s2-devkitlipo-usb.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32s2-devkitlipo-usb.menu.DebugLevel.info=Info
|
|
esp32s2-devkitlipo-usb.menu.DebugLevel.info.build.code_debug=3
|
|
esp32s2-devkitlipo-usb.menu.DebugLevel.debug=Debug
|
|
esp32s2-devkitlipo-usb.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32s2-devkitlipo-usb.menu.DebugLevel.verbose=Verbose
|
|
esp32s2-devkitlipo-usb.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32s2-devkitlipo-usb.menu.EraseFlash.none=Disabled
|
|
esp32s2-devkitlipo-usb.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32s2-devkitlipo-usb.menu.EraseFlash.all=Enabled
|
|
esp32s2-devkitlipo-usb.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32s3-devkitlipo.name=OLIMEX ESP32-S3-DevKit-Lipo
|
|
|
|
esp32s3-devkitlipo.bootloader.tool=esptool_py
|
|
esp32s3-devkitlipo.bootloader.tool.default=esptool_py
|
|
|
|
esp32s3-devkitlipo.upload.tool=esptool_py
|
|
esp32s3-devkitlipo.upload.tool.default=esptool_py
|
|
esp32s3-devkitlipo.upload.tool.network=esp_ota
|
|
|
|
esp32s3-devkitlipo.upload.maximum_size=1310720
|
|
esp32s3-devkitlipo.upload.maximum_data_size=327680
|
|
esp32s3-devkitlipo.upload.flags=
|
|
esp32s3-devkitlipo.upload.extra_flags=
|
|
esp32s3-devkitlipo.upload.use_1200bps_touch=false
|
|
esp32s3-devkitlipo.upload.wait_for_upload_port=false
|
|
|
|
esp32s3-devkitlipo.serial.disableDTR=false
|
|
esp32s3-devkitlipo.serial.disableRTS=false
|
|
|
|
esp32s3-devkitlipo.build.tarch=xtensa
|
|
esp32s3-devkitlipo.build.bootloader_addr=0x0
|
|
esp32s3-devkitlipo.build.target=esp32s3
|
|
esp32s3-devkitlipo.build.mcu=esp32s3
|
|
esp32s3-devkitlipo.build.core=esp32
|
|
esp32s3-devkitlipo.build.variant=esp32s3-devkit-lipo
|
|
esp32s3-devkitlipo.build.board=ESP32S3_DEVKIT_LIPO
|
|
|
|
esp32s3-devkitlipo.build.usb_mode=1
|
|
esp32s3-devkitlipo.build.cdc_on_boot=0
|
|
esp32s3-devkitlipo.build.msc_on_boot=0
|
|
esp32s3-devkitlipo.build.dfu_on_boot=0
|
|
esp32s3-devkitlipo.build.f_cpu=240000000L
|
|
esp32s3-devkitlipo.build.flash_size=4MB
|
|
esp32s3-devkitlipo.build.flash_freq=80m
|
|
esp32s3-devkitlipo.build.flash_mode=dio
|
|
esp32s3-devkitlipo.build.boot=qio
|
|
esp32s3-devkitlipo.build.boot_freq=80m
|
|
esp32s3-devkitlipo.build.partitions=default
|
|
esp32s3-devkitlipo.build.defines=
|
|
esp32s3-devkitlipo.build.loop_core=
|
|
esp32s3-devkitlipo.build.event_core=
|
|
esp32s3-devkitlipo.build.psram_type=qspi
|
|
esp32s3-devkitlipo.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
esp32s3-devkitlipo.menu.JTAGAdapter.default=Disabled
|
|
esp32s3-devkitlipo.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
esp32s3-devkitlipo.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
esp32s3-devkitlipo.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
esp32s3-devkitlipo.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
esp32s3-devkitlipo.menu.JTAGAdapter.external=FTDI Adapter
|
|
esp32s3-devkitlipo.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
esp32s3-devkitlipo.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
esp32s3-devkitlipo.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
esp32s3-devkitlipo.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
esp32s3-devkitlipo.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
esp32s3-devkitlipo.menu.PSRAM.disabled=Disabled
|
|
esp32s3-devkitlipo.menu.PSRAM.disabled.build.defines=
|
|
esp32s3-devkitlipo.menu.PSRAM.disabled.build.psram_type=qspi
|
|
esp32s3-devkitlipo.menu.PSRAM.enabled=QSPI PSRAM
|
|
esp32s3-devkitlipo.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
esp32s3-devkitlipo.menu.PSRAM.enabled.build.psram_type=qspi
|
|
esp32s3-devkitlipo.menu.PSRAM.opi=OPI PSRAM
|
|
esp32s3-devkitlipo.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
esp32s3-devkitlipo.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
esp32s3-devkitlipo.menu.FlashMode.qio=QIO 80MHz
|
|
esp32s3-devkitlipo.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32s3-devkitlipo.menu.FlashMode.qio.build.boot=qio
|
|
esp32s3-devkitlipo.menu.FlashMode.qio.build.boot_freq=80m
|
|
esp32s3-devkitlipo.menu.FlashMode.qio.build.flash_freq=80m
|
|
esp32s3-devkitlipo.menu.FlashMode.qio120=QIO 120MHz
|
|
esp32s3-devkitlipo.menu.FlashMode.qio120.build.flash_mode=dio
|
|
esp32s3-devkitlipo.menu.FlashMode.qio120.build.boot=qio
|
|
esp32s3-devkitlipo.menu.FlashMode.qio120.build.boot_freq=120m
|
|
esp32s3-devkitlipo.menu.FlashMode.qio120.build.flash_freq=80m
|
|
esp32s3-devkitlipo.menu.FlashMode.dio=DIO 80MHz
|
|
esp32s3-devkitlipo.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32s3-devkitlipo.menu.FlashMode.dio.build.boot=dio
|
|
esp32s3-devkitlipo.menu.FlashMode.dio.build.boot_freq=80m
|
|
esp32s3-devkitlipo.menu.FlashMode.dio.build.flash_freq=80m
|
|
esp32s3-devkitlipo.menu.FlashMode.opi=OPI 80MHz
|
|
esp32s3-devkitlipo.menu.FlashMode.opi.build.flash_mode=dout
|
|
esp32s3-devkitlipo.menu.FlashMode.opi.build.boot=opi
|
|
esp32s3-devkitlipo.menu.FlashMode.opi.build.boot_freq=80m
|
|
esp32s3-devkitlipo.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
esp32s3-devkitlipo.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32s3-devkitlipo.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32s3-devkitlipo.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32s3-devkitlipo.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32s3-devkitlipo.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32s3-devkitlipo.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32s3-devkitlipo.menu.FlashSize.16M.build.flash_size=16MB
|
|
esp32s3-devkitlipo.menu.FlashSize.32M=32MB (256Mb)
|
|
esp32s3-devkitlipo.menu.FlashSize.32M.build.flash_size=32MB
|
|
esp32s3-devkitlipo.menu.FlashSize.32M.build.partitions=app5M_fat24M_32MB
|
|
|
|
esp32s3-devkitlipo.menu.LoopCore.1=Core 1
|
|
esp32s3-devkitlipo.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
esp32s3-devkitlipo.menu.LoopCore.0=Core 0
|
|
esp32s3-devkitlipo.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
esp32s3-devkitlipo.menu.EventsCore.1=Core 1
|
|
esp32s3-devkitlipo.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
esp32s3-devkitlipo.menu.EventsCore.0=Core 0
|
|
esp32s3-devkitlipo.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
esp32s3-devkitlipo.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
esp32s3-devkitlipo.menu.USBMode.hwcdc.build.usb_mode=1
|
|
esp32s3-devkitlipo.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
esp32s3-devkitlipo.menu.USBMode.default.build.usb_mode=0
|
|
|
|
esp32s3-devkitlipo.menu.CDCOnBoot.default=Disabled
|
|
esp32s3-devkitlipo.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
esp32s3-devkitlipo.menu.CDCOnBoot.cdc=Enabled
|
|
esp32s3-devkitlipo.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
esp32s3-devkitlipo.menu.MSCOnBoot.default=Disabled
|
|
esp32s3-devkitlipo.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
esp32s3-devkitlipo.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
esp32s3-devkitlipo.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
esp32s3-devkitlipo.menu.DFUOnBoot.default=Disabled
|
|
esp32s3-devkitlipo.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
esp32s3-devkitlipo.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
esp32s3-devkitlipo.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
esp32s3-devkitlipo.menu.UploadMode.default=UART0 / Hardware CDC
|
|
esp32s3-devkitlipo.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
esp32s3-devkitlipo.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
esp32s3-devkitlipo.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
esp32s3-devkitlipo.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
esp32s3-devkitlipo.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
esp32s3-devkitlipo.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32s3-devkitlipo.menu.PartitionScheme.default.build.partitions=default
|
|
esp32s3-devkitlipo.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32s3-devkitlipo.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32s3-devkitlipo.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32s3-devkitlipo.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32s3-devkitlipo.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32s3-devkitlipo.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32s3-devkitlipo.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32s3-devkitlipo.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32s3-devkitlipo.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32s3-devkitlipo.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32s3-devkitlipo.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32s3-devkitlipo.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32s3-devkitlipo.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32s3-devkitlipo.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32s3-devkitlipo.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32s3-devkitlipo.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32s3-devkitlipo.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32s3-devkitlipo.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32s3-devkitlipo.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32s3-devkitlipo.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32s3-devkitlipo.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32s3-devkitlipo.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32s3-devkitlipo.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32s3-devkitlipo.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32s3-devkitlipo.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32s3-devkitlipo.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32s3-devkitlipo.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32s3-devkitlipo.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32s3-devkitlipo.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32s3-devkitlipo.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32s3-devkitlipo.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
esp32s3-devkitlipo.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32s3-devkitlipo.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32s3-devkitlipo.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32s3-devkitlipo.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32s3-devkitlipo.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32s3-devkitlipo.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32s3-devkitlipo.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
esp32s3-devkitlipo.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
esp32s3-devkitlipo.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
esp32s3-devkitlipo.menu.PartitionScheme.app5M_fat24M_32MB=32M Flash (4.8MB APP/22MB FATFS)
|
|
esp32s3-devkitlipo.menu.PartitionScheme.app5M_fat24M_32MB.build.partitions=large_fat_32MB
|
|
esp32s3-devkitlipo.menu.PartitionScheme.app5M_fat24M_32MB.upload.maximum_size=4718592
|
|
esp32s3-devkitlipo.menu.PartitionScheme.app5M_little24M_32MB=32M Flash (4.8MB APP/22MB LittleFS)
|
|
esp32s3-devkitlipo.menu.PartitionScheme.app5M_little24M_32MB.build.partitions=large_littlefs_32MB
|
|
esp32s3-devkitlipo.menu.PartitionScheme.app5M_little24M_32MB.upload.maximum_size=4718592
|
|
esp32s3-devkitlipo.menu.PartitionScheme.esp_sr_16=ESP SR 16M (3MB APP/7MB SPIFFS/2.9MB MODEL)
|
|
esp32s3-devkitlipo.menu.PartitionScheme.esp_sr_16.upload.maximum_size=3145728
|
|
esp32s3-devkitlipo.menu.PartitionScheme.esp_sr_16.upload.extra_flags=0xD10000 {build.path}/srmodels.bin
|
|
esp32s3-devkitlipo.menu.PartitionScheme.esp_sr_16.build.partitions=esp_sr_16
|
|
esp32s3-devkitlipo.menu.PartitionScheme.custom=Custom
|
|
esp32s3-devkitlipo.menu.PartitionScheme.custom.build.partitions=
|
|
esp32s3-devkitlipo.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32s3-devkitlipo.menu.CPUFreq.240=240MHz (WiFi)
|
|
esp32s3-devkitlipo.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
esp32s3-devkitlipo.menu.CPUFreq.160=160MHz (WiFi)
|
|
esp32s3-devkitlipo.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32s3-devkitlipo.menu.CPUFreq.80=80MHz (WiFi)
|
|
esp32s3-devkitlipo.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32s3-devkitlipo.menu.CPUFreq.40=40MHz
|
|
esp32s3-devkitlipo.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32s3-devkitlipo.menu.CPUFreq.20=20MHz
|
|
esp32s3-devkitlipo.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32s3-devkitlipo.menu.CPUFreq.10=10MHz
|
|
esp32s3-devkitlipo.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32s3-devkitlipo.menu.UploadSpeed.921600=921600
|
|
esp32s3-devkitlipo.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32s3-devkitlipo.menu.UploadSpeed.115200=115200
|
|
esp32s3-devkitlipo.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32s3-devkitlipo.menu.UploadSpeed.256000.windows=256000
|
|
esp32s3-devkitlipo.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32s3-devkitlipo.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32s3-devkitlipo.menu.UploadSpeed.230400=230400
|
|
esp32s3-devkitlipo.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32s3-devkitlipo.menu.UploadSpeed.460800.linux=460800
|
|
esp32s3-devkitlipo.menu.UploadSpeed.460800.macosx=460800
|
|
esp32s3-devkitlipo.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32s3-devkitlipo.menu.UploadSpeed.512000.windows=512000
|
|
esp32s3-devkitlipo.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32s3-devkitlipo.menu.DebugLevel.none=None
|
|
esp32s3-devkitlipo.menu.DebugLevel.none.build.code_debug=0
|
|
esp32s3-devkitlipo.menu.DebugLevel.error=Error
|
|
esp32s3-devkitlipo.menu.DebugLevel.error.build.code_debug=1
|
|
esp32s3-devkitlipo.menu.DebugLevel.warn=Warn
|
|
esp32s3-devkitlipo.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32s3-devkitlipo.menu.DebugLevel.info=Info
|
|
esp32s3-devkitlipo.menu.DebugLevel.info.build.code_debug=3
|
|
esp32s3-devkitlipo.menu.DebugLevel.debug=Debug
|
|
esp32s3-devkitlipo.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32s3-devkitlipo.menu.DebugLevel.verbose=Verbose
|
|
esp32s3-devkitlipo.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32s3-devkitlipo.menu.EraseFlash.none=Disabled
|
|
esp32s3-devkitlipo.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32s3-devkitlipo.menu.EraseFlash.all=Enabled
|
|
esp32s3-devkitlipo.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32c3-devkitlipo.name=OLIMEX ESP32-C3-DevKit-Lipo
|
|
|
|
esp32c3-devkitlipo.bootloader.tool=esptool_py
|
|
esp32c3-devkitlipo.bootloader.tool.default=esptool_py
|
|
|
|
esp32c3-devkitlipo.upload.tool=esptool_py
|
|
esp32c3-devkitlipo.upload.tool.default=esptool_py
|
|
esp32c3-devkitlipo.upload.tool.network=esp_ota
|
|
|
|
esp32c3-devkitlipo.upload.maximum_size=1310720
|
|
esp32c3-devkitlipo.upload.maximum_data_size=327680
|
|
esp32c3-devkitlipo.upload.flags=
|
|
esp32c3-devkitlipo.upload.extra_flags=
|
|
esp32c3-devkitlipo.upload.use_1200bps_touch=false
|
|
esp32c3-devkitlipo.upload.wait_for_upload_port=false
|
|
|
|
esp32c3-devkitlipo.serial.disableDTR=false
|
|
esp32c3-devkitlipo.serial.disableRTS=false
|
|
|
|
esp32c3-devkitlipo.build.tarch=riscv32
|
|
esp32c3-devkitlipo.build.target=esp
|
|
esp32c3-devkitlipo.build.mcu=esp32c3
|
|
esp32c3-devkitlipo.build.core=esp32
|
|
esp32c3-devkitlipo.build.variant=esp32c3-devkit-lipo
|
|
esp32c3-devkitlipo.build.board=ESP32C3_DEVKIT_LIPO
|
|
esp32c3-devkitlipo.build.bootloader_addr=0x0
|
|
|
|
esp32c3-devkitlipo.build.cdc_on_boot=0
|
|
esp32c3-devkitlipo.build.f_cpu=160000000L
|
|
esp32c3-devkitlipo.build.flash_size=4MB
|
|
esp32c3-devkitlipo.build.flash_freq=80m
|
|
esp32c3-devkitlipo.build.flash_mode=qio
|
|
esp32c3-devkitlipo.build.boot=qio
|
|
esp32c3-devkitlipo.build.partitions=default
|
|
esp32c3-devkitlipo.build.defines=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
esp32c3-devkitlipo.menu.JTAGAdapter.default=Disabled
|
|
esp32c3-devkitlipo.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
esp32c3-devkitlipo.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
esp32c3-devkitlipo.menu.JTAGAdapter.builtin.build.openocdscript=esp32c3-builtin.cfg
|
|
esp32c3-devkitlipo.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
esp32c3-devkitlipo.menu.JTAGAdapter.external=FTDI Adapter
|
|
esp32c3-devkitlipo.menu.JTAGAdapter.external.build.openocdscript=esp32c3-ftdi.cfg
|
|
esp32c3-devkitlipo.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
esp32c3-devkitlipo.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
esp32c3-devkitlipo.menu.JTAGAdapter.bridge.build.openocdscript=esp32c3-bridge.cfg
|
|
esp32c3-devkitlipo.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
esp32c3-devkitlipo.menu.CDCOnBoot.default=Disabled
|
|
esp32c3-devkitlipo.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
esp32c3-devkitlipo.menu.CDCOnBoot.cdc=Enabled
|
|
esp32c3-devkitlipo.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
esp32c3-devkitlipo.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32c3-devkitlipo.menu.PartitionScheme.default.build.partitions=default
|
|
esp32c3-devkitlipo.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32c3-devkitlipo.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32c3-devkitlipo.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32c3-devkitlipo.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32c3-devkitlipo.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32c3-devkitlipo.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32c3-devkitlipo.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32c3-devkitlipo.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32c3-devkitlipo.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32c3-devkitlipo.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32c3-devkitlipo.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32c3-devkitlipo.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32c3-devkitlipo.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32c3-devkitlipo.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32c3-devkitlipo.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32c3-devkitlipo.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32c3-devkitlipo.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32c3-devkitlipo.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32c3-devkitlipo.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32c3-devkitlipo.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32c3-devkitlipo.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32c3-devkitlipo.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32c3-devkitlipo.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32c3-devkitlipo.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32c3-devkitlipo.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32c3-devkitlipo.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32c3-devkitlipo.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32c3-devkitlipo.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32c3-devkitlipo.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32c3-devkitlipo.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32c3-devkitlipo.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
esp32c3-devkitlipo.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32c3-devkitlipo.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32c3-devkitlipo.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32c3-devkitlipo.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32c3-devkitlipo.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32c3-devkitlipo.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32c3-devkitlipo.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
esp32c3-devkitlipo.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
esp32c3-devkitlipo.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
esp32c3-devkitlipo.menu.PartitionScheme.custom=Custom
|
|
esp32c3-devkitlipo.menu.PartitionScheme.custom.build.partitions=
|
|
esp32c3-devkitlipo.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32c3-devkitlipo.menu.CPUFreq.160=160MHz (WiFi)
|
|
esp32c3-devkitlipo.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32c3-devkitlipo.menu.CPUFreq.80=80MHz (WiFi)
|
|
esp32c3-devkitlipo.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32c3-devkitlipo.menu.CPUFreq.40=40MHz
|
|
esp32c3-devkitlipo.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32c3-devkitlipo.menu.CPUFreq.20=20MHz
|
|
esp32c3-devkitlipo.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32c3-devkitlipo.menu.CPUFreq.10=10MHz
|
|
esp32c3-devkitlipo.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32c3-devkitlipo.menu.FlashMode.qio=QIO
|
|
esp32c3-devkitlipo.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32c3-devkitlipo.menu.FlashMode.qio.build.boot=qio
|
|
esp32c3-devkitlipo.menu.FlashMode.dio=DIO
|
|
esp32c3-devkitlipo.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32c3-devkitlipo.menu.FlashMode.dio.build.boot=dio
|
|
esp32c3-devkitlipo.menu.FlashMode.qout=QOUT
|
|
esp32c3-devkitlipo.menu.FlashMode.qout.build.flash_mode=dout
|
|
esp32c3-devkitlipo.menu.FlashMode.qout.build.boot=qout
|
|
esp32c3-devkitlipo.menu.FlashMode.dout=DOUT
|
|
esp32c3-devkitlipo.menu.FlashMode.dout.build.flash_mode=dout
|
|
esp32c3-devkitlipo.menu.FlashMode.dout.build.boot=dout
|
|
|
|
esp32c3-devkitlipo.menu.FlashFreq.80=80MHz
|
|
esp32c3-devkitlipo.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32c3-devkitlipo.menu.FlashFreq.40=40MHz
|
|
esp32c3-devkitlipo.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32c3-devkitlipo.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32c3-devkitlipo.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32c3-devkitlipo.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32c3-devkitlipo.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32c3-devkitlipo.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32c3-devkitlipo.menu.FlashSize.2M=2MB (16Mb)
|
|
esp32c3-devkitlipo.menu.FlashSize.2M.build.flash_size=2MB
|
|
esp32c3-devkitlipo.menu.FlashSize.2M.build.partitions=minimal
|
|
esp32c3-devkitlipo.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32c3-devkitlipo.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
esp32c3-devkitlipo.menu.UploadSpeed.921600=921600
|
|
esp32c3-devkitlipo.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32c3-devkitlipo.menu.UploadSpeed.115200=115200
|
|
esp32c3-devkitlipo.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32c3-devkitlipo.menu.UploadSpeed.256000.windows=256000
|
|
esp32c3-devkitlipo.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32c3-devkitlipo.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32c3-devkitlipo.menu.UploadSpeed.230400=230400
|
|
esp32c3-devkitlipo.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32c3-devkitlipo.menu.UploadSpeed.460800.linux=460800
|
|
esp32c3-devkitlipo.menu.UploadSpeed.460800.macosx=460800
|
|
esp32c3-devkitlipo.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32c3-devkitlipo.menu.UploadSpeed.512000.windows=512000
|
|
esp32c3-devkitlipo.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32c3-devkitlipo.menu.DebugLevel.none=None
|
|
esp32c3-devkitlipo.menu.DebugLevel.none.build.code_debug=0
|
|
esp32c3-devkitlipo.menu.DebugLevel.error=Error
|
|
esp32c3-devkitlipo.menu.DebugLevel.error.build.code_debug=1
|
|
esp32c3-devkitlipo.menu.DebugLevel.warn=Warn
|
|
esp32c3-devkitlipo.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32c3-devkitlipo.menu.DebugLevel.info=Info
|
|
esp32c3-devkitlipo.menu.DebugLevel.info.build.code_debug=3
|
|
esp32c3-devkitlipo.menu.DebugLevel.debug=Debug
|
|
esp32c3-devkitlipo.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32c3-devkitlipo.menu.DebugLevel.verbose=Verbose
|
|
esp32c3-devkitlipo.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32c3-devkitlipo.menu.EraseFlash.none=Disabled
|
|
esp32c3-devkitlipo.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32c3-devkitlipo.menu.EraseFlash.all=Enabled
|
|
esp32c3-devkitlipo.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32c6-evb.name=OLIMEX ESP32-C6-EVB
|
|
|
|
esp32c6-evb.bootloader.tool=esptool_py
|
|
esp32c6-evb.bootloader.tool.default=esptool_py
|
|
|
|
esp32c6-evb.upload.tool=esptool_py
|
|
esp32c6-evb.upload.tool.default=esptool_py
|
|
esp32c6-evb.upload.tool.network=esp_ota
|
|
|
|
esp32c6-evb.upload.maximum_size=1310720
|
|
esp32c6-evb.upload.maximum_data_size=327680
|
|
esp32c6-evb.upload.flags=
|
|
esp32c6-evb.upload.extra_flags=
|
|
esp32c6-evb.upload.use_1200bps_touch=false
|
|
esp32c6-evb.upload.wait_for_upload_port=false
|
|
|
|
esp32c6-evb.serial.disableDTR=false
|
|
esp32c6-evb.serial.disableRTS=false
|
|
|
|
esp32c6-evb.build.tarch=riscv32
|
|
esp32c6-evb.build.target=esp
|
|
esp32c6-evb.build.mcu=esp32c6
|
|
esp32c6-evb.build.core=esp32
|
|
esp32c6-evb.build.variant=esp32c6-evb
|
|
esp32c6-evb.build.board=ESP32C6_EVB
|
|
esp32c6-evb.build.bootloader_addr=0x0
|
|
|
|
esp32c6-evb.build.cdc_on_boot=0
|
|
esp32c6-evb.build.f_cpu=160000000L
|
|
esp32c6-evb.build.flash_size=4MB
|
|
esp32c6-evb.build.flash_freq=80m
|
|
esp32c6-evb.build.flash_mode=qio
|
|
esp32c6-evb.build.boot=qio
|
|
esp32c6-evb.build.partitions=default
|
|
esp32c6-evb.build.defines=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
esp32c6-evb.menu.JTAGAdapter.default=Disabled
|
|
esp32c6-evb.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
esp32c6-evb.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
esp32c6-evb.menu.JTAGAdapter.builtin.build.openocdscript=esp32c6-builtin.cfg
|
|
esp32c6-evb.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
esp32c6-evb.menu.JTAGAdapter.external=FTDI Adapter
|
|
esp32c6-evb.menu.JTAGAdapter.external.build.openocdscript=esp32c6-ftdi.cfg
|
|
esp32c6-evb.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
esp32c6-evb.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
esp32c6-evb.menu.JTAGAdapter.bridge.build.openocdscript=esp32c6-bridge.cfg
|
|
esp32c6-evb.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
esp32c6-evb.menu.CDCOnBoot.default=Disabled
|
|
esp32c6-evb.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
esp32c6-evb.menu.CDCOnBoot.cdc=Enabled
|
|
esp32c6-evb.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
esp32c6-evb.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32c6-evb.menu.PartitionScheme.default.build.partitions=default
|
|
esp32c6-evb.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32c6-evb.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32c6-evb.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32c6-evb.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32c6-evb.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32c6-evb.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32c6-evb.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32c6-evb.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32c6-evb.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32c6-evb.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32c6-evb.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32c6-evb.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32c6-evb.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32c6-evb.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32c6-evb.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32c6-evb.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32c6-evb.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32c6-evb.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32c6-evb.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32c6-evb.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32c6-evb.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32c6-evb.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32c6-evb.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32c6-evb.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32c6-evb.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32c6-evb.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32c6-evb.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32c6-evb.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32c6-evb.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32c6-evb.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32c6-evb.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
esp32c6-evb.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32c6-evb.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32c6-evb.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32c6-evb.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32c6-evb.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32c6-evb.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32c6-evb.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
esp32c6-evb.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
esp32c6-evb.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
esp32c6-evb.menu.PartitionScheme.zigbee=Zigbee 4MB with spiffs
|
|
esp32c6-evb.menu.PartitionScheme.zigbee.build.partitions=zigbee
|
|
esp32c6-evb.menu.PartitionScheme.zigbee.upload.maximum_size=1310720
|
|
esp32c6-evb.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
esp32c6-evb.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
esp32c6-evb.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
esp32c6-evb.menu.PartitionScheme.custom=Custom
|
|
esp32c6-evb.menu.PartitionScheme.custom.build.partitions=
|
|
esp32c6-evb.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32c6-evb.menu.CPUFreq.160=160MHz (WiFi)
|
|
esp32c6-evb.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32c6-evb.menu.CPUFreq.80=80MHz (WiFi)
|
|
esp32c6-evb.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32c6-evb.menu.CPUFreq.40=40MHz
|
|
esp32c6-evb.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32c6-evb.menu.CPUFreq.20=20MHz
|
|
esp32c6-evb.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32c6-evb.menu.CPUFreq.10=10MHz
|
|
esp32c6-evb.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32c6-evb.menu.FlashMode.qio=QIO
|
|
esp32c6-evb.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32c6-evb.menu.FlashMode.qio.build.boot=qio
|
|
esp32c6-evb.menu.FlashMode.dio=DIO
|
|
esp32c6-evb.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32c6-evb.menu.FlashMode.dio.build.boot=dio
|
|
|
|
esp32c6-evb.menu.FlashFreq.80=80MHz
|
|
esp32c6-evb.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32c6-evb.menu.FlashFreq.40=40MHz
|
|
esp32c6-evb.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32c6-evb.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32c6-evb.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32c6-evb.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32c6-evb.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32c6-evb.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32c6-evb.menu.FlashSize.2M=2MB (16Mb)
|
|
esp32c6-evb.menu.FlashSize.2M.build.flash_size=2MB
|
|
esp32c6-evb.menu.FlashSize.2M.build.partitions=minimal
|
|
esp32c6-evb.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32c6-evb.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
esp32c6-evb.menu.UploadSpeed.921600=921600
|
|
esp32c6-evb.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32c6-evb.menu.UploadSpeed.115200=115200
|
|
esp32c6-evb.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32c6-evb.menu.UploadSpeed.256000.windows=256000
|
|
esp32c6-evb.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32c6-evb.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32c6-evb.menu.UploadSpeed.230400=230400
|
|
esp32c6-evb.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32c6-evb.menu.UploadSpeed.460800.linux=460800
|
|
esp32c6-evb.menu.UploadSpeed.460800.macosx=460800
|
|
esp32c6-evb.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32c6-evb.menu.UploadSpeed.512000.windows=512000
|
|
esp32c6-evb.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32c6-evb.menu.DebugLevel.none=None
|
|
esp32c6-evb.menu.DebugLevel.none.build.code_debug=0
|
|
esp32c6-evb.menu.DebugLevel.error=Error
|
|
esp32c6-evb.menu.DebugLevel.error.build.code_debug=1
|
|
esp32c6-evb.menu.DebugLevel.warn=Warn
|
|
esp32c6-evb.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32c6-evb.menu.DebugLevel.info=Info
|
|
esp32c6-evb.menu.DebugLevel.info.build.code_debug=3
|
|
esp32c6-evb.menu.DebugLevel.debug=Debug
|
|
esp32c6-evb.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32c6-evb.menu.DebugLevel.verbose=Verbose
|
|
esp32c6-evb.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32c6-evb.menu.EraseFlash.none=Disabled
|
|
esp32c6-evb.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32c6-evb.menu.EraseFlash.all=Enabled
|
|
esp32c6-evb.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
esp32c6-evb.menu.ZigbeeMode.default=Disabled
|
|
esp32c6-evb.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
esp32c6-evb.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
esp32c6-evb.menu.ZigbeeMode.ed=Zigbee ED (end device)
|
|
esp32c6-evb.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
|
|
esp32c6-evb.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
|
|
esp32c6-evb.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
esp32c6-evb.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
esp32c6-evb.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
esp32c6-evb.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
|
|
esp32c6-evb.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
|
|
esp32c6-evb.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
esp32h2-devkitlipo.name=OLIMEX ESP32-H2-DevKit-LiPo
|
|
|
|
esp32h2-devkitlipo.bootloader.tool=esptool_py
|
|
esp32h2-devkitlipo.bootloader.tool.default=esptool_py
|
|
|
|
esp32h2-devkitlipo.upload.tool=esptool_py
|
|
esp32h2-devkitlipo.upload.tool.default=esptool_py
|
|
esp32h2-devkitlipo.upload.tool.network=esp_ota
|
|
|
|
esp32h2-devkitlipo.upload.maximum_size=1310720
|
|
esp32h2-devkitlipo.upload.maximum_data_size=327680
|
|
esp32h2-devkitlipo.upload.flags=
|
|
esp32h2-devkitlipo.upload.extra_flags=
|
|
esp32h2-devkitlipo.upload.use_1200bps_touch=false
|
|
esp32h2-devkitlipo.upload.wait_for_upload_port=false
|
|
|
|
esp32h2-devkitlipo.serial.disableDTR=false
|
|
esp32h2-devkitlipo.serial.disableRTS=false
|
|
|
|
esp32h2-devkitlipo.build.tarch=riscv32
|
|
esp32h2-devkitlipo.build.target=esp
|
|
esp32h2-devkitlipo.build.mcu=esp32h2
|
|
esp32h2-devkitlipo.build.core=esp32
|
|
esp32h2-devkitlipo.build.variant=esp32h2-devkit-lipo
|
|
esp32h2-devkitlipo.build.board=ESP32H2_DEVKIT_LIPO
|
|
esp32h2-devkitlipo.build.bootloader_addr=0x0
|
|
|
|
esp32h2-devkitlipo.build.cdc_on_boot=0
|
|
esp32h2-devkitlipo.build.f_cpu=96000000L
|
|
esp32h2-devkitlipo.build.flash_size=4MB
|
|
esp32h2-devkitlipo.build.flash_freq=64m
|
|
esp32h2-devkitlipo.build.img_freq=48m
|
|
esp32h2-devkitlipo.build.flash_mode=qio
|
|
esp32h2-devkitlipo.build.boot=qio
|
|
esp32h2-devkitlipo.build.partitions=default
|
|
esp32h2-devkitlipo.build.defines=
|
|
|
|
esp32h2-devkitlipo.menu.JTAGAdapter.default=Disabled
|
|
esp32h2-devkitlipo.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
esp32h2-devkitlipo.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
esp32h2-devkitlipo.menu.JTAGAdapter.builtin.build.openocdscript=esp32h2-builtin.cfg
|
|
esp32h2-devkitlipo.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
esp32h2-devkitlipo.menu.JTAGAdapter.external=FTDI Adapter
|
|
esp32h2-devkitlipo.menu.JTAGAdapter.external.build.openocdscript=esp32h2-ftdi.cfg
|
|
esp32h2-devkitlipo.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
esp32h2-devkitlipo.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
esp32h2-devkitlipo.menu.JTAGAdapter.bridge.build.openocdscript=esp32h2-bridge.cfg
|
|
esp32h2-devkitlipo.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
esp32h2-devkitlipo.menu.CDCOnBoot.default=Disabled
|
|
esp32h2-devkitlipo.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
esp32h2-devkitlipo.menu.CDCOnBoot.cdc=Enabled
|
|
esp32h2-devkitlipo.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
esp32h2-devkitlipo.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32h2-devkitlipo.menu.PartitionScheme.default.build.partitions=default
|
|
esp32h2-devkitlipo.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32h2-devkitlipo.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32h2-devkitlipo.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32h2-devkitlipo.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32h2-devkitlipo.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32h2-devkitlipo.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32h2-devkitlipo.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32h2-devkitlipo.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32h2-devkitlipo.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32h2-devkitlipo.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32h2-devkitlipo.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32h2-devkitlipo.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32h2-devkitlipo.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32h2-devkitlipo.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32h2-devkitlipo.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32h2-devkitlipo.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32h2-devkitlipo.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32h2-devkitlipo.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32h2-devkitlipo.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32h2-devkitlipo.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32h2-devkitlipo.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32h2-devkitlipo.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32h2-devkitlipo.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32h2-devkitlipo.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32h2-devkitlipo.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32h2-devkitlipo.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32h2-devkitlipo.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32h2-devkitlipo.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32h2-devkitlipo.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32h2-devkitlipo.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32h2-devkitlipo.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
#esp32h2-devkitlipo.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
#esp32h2-devkitlipo.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
#esp32h2-devkitlipo.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
#esp32h2-devkitlipo.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
#esp32h2-devkitlipo.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
#esp32h2-devkitlipo.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
#esp32h2-devkitlipo.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
#esp32h2-devkitlipo.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
#esp32h2-devkitlipo.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
esp32h2-devkitlipo.menu.PartitionScheme.zigbee=Zigbee 4MB with spiffs
|
|
esp32h2-devkitlipo.menu.PartitionScheme.zigbee.build.partitions=zigbee
|
|
esp32h2-devkitlipo.menu.PartitionScheme.zigbee.upload.maximum_size=1310720
|
|
esp32h2-devkitlipo.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
esp32h2-devkitlipo.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
esp32h2-devkitlipo.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
esp32h2-devkitlipo.menu.PartitionScheme.custom=Custom
|
|
esp32h2-devkitlipo.menu.PartitionScheme.custom.build.partitions=
|
|
esp32h2-devkitlipo.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32h2-devkitlipo.menu.FlashMode.qio=QIO
|
|
esp32h2-devkitlipo.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32h2-devkitlipo.menu.FlashMode.qio.build.boot=qio
|
|
esp32h2-devkitlipo.menu.FlashMode.dio=DIO
|
|
esp32h2-devkitlipo.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32h2-devkitlipo.menu.FlashMode.dio.build.boot=dio
|
|
|
|
esp32h2-devkitlipo.menu.FlashFreq.64=64MHz
|
|
esp32h2-devkitlipo.menu.FlashFreq.64.build.flash_freq=64m
|
|
esp32h2-devkitlipo.menu.FlashFreq.64.build.img_freq=48m
|
|
#esp32h-devkitlipo2.menu.FlashFreq.32=32MHz
|
|
#esp32h-devkitlipo2.menu.FlashFreq.32.build.flash_freq=32m
|
|
#esp32h-devkitlipo2.menu.FlashFreq.32.build.img_freq=24m
|
|
esp32h2-devkitlipo.menu.FlashFreq.16=16MHz
|
|
esp32h2-devkitlipo.menu.FlashFreq.16.build.flash_freq=16m
|
|
esp32h2-devkitlipo.menu.FlashFreq.16.build.img_freq=12m
|
|
|
|
esp32h2-devkitlipo.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32h2-devkitlipo.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32h2-devkitlipo.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32h2-devkitlipo.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32h2-devkitlipo.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32h2-devkitlipo.menu.FlashSize.2M=2MB (16Mb)
|
|
esp32h2-devkitlipo.menu.FlashSize.2M.build.flash_size=2MB
|
|
esp32h2-devkitlipo.menu.FlashSize.2M.build.partitions=minimal
|
|
esp32h2-devkitlipo.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32h2-devkitlipo.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
esp32h2-devkitlipo.menu.UploadSpeed.921600=921600
|
|
esp32h2-devkitlipo.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32h2-devkitlipo.menu.UploadSpeed.115200=115200
|
|
esp32h2-devkitlipo.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32h2-devkitlipo.menu.UploadSpeed.256000.windows=256000
|
|
esp32h2-devkitlipo.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32h2-devkitlipo.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32h2-devkitlipo.menu.UploadSpeed.230400=230400
|
|
esp32h2-devkitlipo.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32h2-devkitlipo.menu.UploadSpeed.460800.linux=460800
|
|
esp32h2-devkitlipo.menu.UploadSpeed.460800.macosx=460800
|
|
esp32h2-devkitlipo.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32h2-devkitlipo.menu.UploadSpeed.512000.windows=512000
|
|
esp32h2-devkitlipo.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32h2-devkitlipo.menu.DebugLevel.none=None
|
|
esp32h2-devkitlipo.menu.DebugLevel.none.build.code_debug=0
|
|
esp32h2-devkitlipo.menu.DebugLevel.error=Error
|
|
esp32h2-devkitlipo.menu.DebugLevel.error.build.code_debug=1
|
|
esp32h2-devkitlipo.menu.DebugLevel.warn=Warn
|
|
esp32h2-devkitlipo.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32h2-devkitlipo.menu.DebugLevel.info=Info
|
|
esp32h2-devkitlipo.menu.DebugLevel.info.build.code_debug=3
|
|
esp32h2-devkitlipo.menu.DebugLevel.debug=Debug
|
|
esp32h2-devkitlipo.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32h2-devkitlipo.menu.DebugLevel.verbose=Verbose
|
|
esp32h2-devkitlipo.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32h2-devkitlipo.menu.EraseFlash.none=Disabled
|
|
esp32h2-devkitlipo.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32h2-devkitlipo.menu.EraseFlash.all=Enabled
|
|
esp32h2-devkitlipo.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
esp32h2-devkitlipo.menu.ZigbeeMode.default=Disabled
|
|
esp32h2-devkitlipo.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
esp32h2-devkitlipo.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
esp32h2-devkitlipo.menu.ZigbeeMode.ed=Zigbee ED (end device)
|
|
esp32h2-devkitlipo.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
|
|
esp32h2-devkitlipo.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
|
|
esp32h2-devkitlipo.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
esp32h2-devkitlipo.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
esp32h2-devkitlipo.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
esp32h2-devkitlipo.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
|
|
esp32h2-devkitlipo.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
|
|
esp32h2-devkitlipo.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
esp32-sbc-fabgl.name=OLIMEX ESP32-SBC-FABGL
|
|
|
|
esp32-sbc-fabgl.bootloader.tool=esptool_py
|
|
esp32-sbc-fabgl.bootloader.tool.default=esptool_py
|
|
|
|
esp32-sbc-fabgl.upload.tool=esptool_py
|
|
esp32-sbc-fabgl.upload.tool.default=esptool_py
|
|
esp32-sbc-fabgl.upload.tool.network=esp_ota
|
|
|
|
esp32-sbc-fabgl.upload.maximum_size=1310720
|
|
esp32-sbc-fabgl.upload.maximum_data_size=327680
|
|
esp32-sbc-fabgl.upload.flags=
|
|
esp32-sbc-fabgl.upload.extra_flags=
|
|
|
|
esp32-sbc-fabgl.serial.disableDTR=true
|
|
esp32-sbc-fabgl.serial.disableRTS=true
|
|
|
|
esp32-sbc-fabgl.build.tarch=xtensa
|
|
esp32-sbc-fabgl.build.bootloader_addr=0x1000
|
|
esp32-sbc-fabgl.build.target=esp32
|
|
esp32-sbc-fabgl.build.mcu=esp32
|
|
esp32-sbc-fabgl.build.core=esp32
|
|
esp32-sbc-fabgl.build.variant=esp32-sbc-fabgl
|
|
esp32-sbc-fabgl.build.board=ESP32_SBC_FABGL
|
|
|
|
esp32-sbc-fabgl.build.f_cpu=240000000L
|
|
esp32-sbc-fabgl.build.flash_size=4MB
|
|
esp32-sbc-fabgl.build.flash_freq=40m
|
|
esp32-sbc-fabgl.build.flash_mode=dio
|
|
esp32-sbc-fabgl.build.boot=dio
|
|
esp32-sbc-fabgl.build.partitions=default
|
|
esp32-sbc-fabgl.build.defines=
|
|
esp32-sbc-fabgl.build.loop_core=
|
|
esp32-sbc-fabgl.build.event_core=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
esp32-sbc-fabgl.menu.JTAGAdapter.default=Disabled
|
|
esp32-sbc-fabgl.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
esp32-sbc-fabgl.menu.JTAGAdapter.external=FTDI Adapter
|
|
esp32-sbc-fabgl.menu.JTAGAdapter.external.build.openocdscript=esp32-wrover-kit-3.3v.cfg
|
|
esp32-sbc-fabgl.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
esp32-sbc-fabgl.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
esp32-sbc-fabgl.menu.JTAGAdapter.bridge.build.openocdscript=esp32-bridge.cfg
|
|
esp32-sbc-fabgl.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
esp32-sbc-fabgl.menu.PSRAM.enabled=Enabled
|
|
esp32-sbc-fabgl.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
esp32-sbc-fabgl.menu.PSRAM.enabled.build.extra_libs=
|
|
esp32-sbc-fabgl.menu.PSRAM.disabled=Disabled
|
|
esp32-sbc-fabgl.menu.PSRAM.disabled.build.defines=
|
|
esp32-sbc-fabgl.menu.PSRAM.disabled.build.extra_libs=
|
|
|
|
esp32-sbc-fabgl.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32-sbc-fabgl.menu.PartitionScheme.default.build.partitions=default
|
|
esp32-sbc-fabgl.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32-sbc-fabgl.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32-sbc-fabgl.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32-sbc-fabgl.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32-sbc-fabgl.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32-sbc-fabgl.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32-sbc-fabgl.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32-sbc-fabgl.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32-sbc-fabgl.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32-sbc-fabgl.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32-sbc-fabgl.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32-sbc-fabgl.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32-sbc-fabgl.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32-sbc-fabgl.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32-sbc-fabgl.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32-sbc-fabgl.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32-sbc-fabgl.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32-sbc-fabgl.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32-sbc-fabgl.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32-sbc-fabgl.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32-sbc-fabgl.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32-sbc-fabgl.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32-sbc-fabgl.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32-sbc-fabgl.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32-sbc-fabgl.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32-sbc-fabgl.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
esp32-sbc-fabgl.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
esp32-sbc-fabgl.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
esp32-sbc-fabgl.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
esp32-sbc-fabgl.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
esp32-sbc-fabgl.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
esp32-sbc-fabgl.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32-sbc-fabgl.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32-sbc-fabgl.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32-sbc-fabgl.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32-sbc-fabgl.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32-sbc-fabgl.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
esp32-sbc-fabgl.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
esp32-sbc-fabgl.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
esp32-sbc-fabgl.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
esp32-sbc-fabgl.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
esp32-sbc-fabgl.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
esp32-sbc-fabgl.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
esp32-sbc-fabgl.menu.PartitionScheme.custom=Custom
|
|
esp32-sbc-fabgl.menu.PartitionScheme.custom.build.partitions=
|
|
esp32-sbc-fabgl.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
esp32-sbc-fabgl.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
esp32-sbc-fabgl.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
esp32-sbc-fabgl.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
esp32-sbc-fabgl.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32-sbc-fabgl.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
esp32-sbc-fabgl.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32-sbc-fabgl.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
esp32-sbc-fabgl.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32-sbc-fabgl.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
esp32-sbc-fabgl.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
esp32-sbc-fabgl.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
esp32-sbc-fabgl.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32-sbc-fabgl.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
esp32-sbc-fabgl.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
esp32-sbc-fabgl.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
esp32-sbc-fabgl.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32-sbc-fabgl.menu.FlashMode.qio=QIO
|
|
esp32-sbc-fabgl.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32-sbc-fabgl.menu.FlashMode.qio.build.boot=qio
|
|
esp32-sbc-fabgl.menu.FlashMode.dio=DIO
|
|
esp32-sbc-fabgl.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32-sbc-fabgl.menu.FlashMode.dio.build.boot=dio
|
|
|
|
esp32-sbc-fabgl.menu.FlashFreq.80=80MHz
|
|
esp32-sbc-fabgl.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32-sbc-fabgl.menu.FlashFreq.40=40MHz
|
|
esp32-sbc-fabgl.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32-sbc-fabgl.menu.FlashSize.4M=4MB (32Mb)
|
|
esp32-sbc-fabgl.menu.FlashSize.4M.build.flash_size=4MB
|
|
esp32-sbc-fabgl.menu.FlashSize.8M=8MB (64Mb)
|
|
esp32-sbc-fabgl.menu.FlashSize.8M.build.flash_size=8MB
|
|
esp32-sbc-fabgl.menu.FlashSize.8M.build.partitions=default_8MB
|
|
esp32-sbc-fabgl.menu.FlashSize.2M=2MB (16Mb)
|
|
esp32-sbc-fabgl.menu.FlashSize.2M.build.flash_size=2MB
|
|
esp32-sbc-fabgl.menu.FlashSize.2M.build.partitions=minimal
|
|
esp32-sbc-fabgl.menu.FlashSize.16M=16MB (128Mb)
|
|
esp32-sbc-fabgl.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
esp32-sbc-fabgl.menu.UploadSpeed.921600=921600
|
|
esp32-sbc-fabgl.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32-sbc-fabgl.menu.UploadSpeed.115200=115200
|
|
esp32-sbc-fabgl.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32-sbc-fabgl.menu.UploadSpeed.256000.windows=256000
|
|
esp32-sbc-fabgl.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32-sbc-fabgl.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32-sbc-fabgl.menu.UploadSpeed.230400=230400
|
|
esp32-sbc-fabgl.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32-sbc-fabgl.menu.UploadSpeed.460800.linux=460800
|
|
esp32-sbc-fabgl.menu.UploadSpeed.460800.macosx=460800
|
|
esp32-sbc-fabgl.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32-sbc-fabgl.menu.UploadSpeed.512000.windows=512000
|
|
esp32-sbc-fabgl.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32-sbc-fabgl.menu.LoopCore.1=Core 1
|
|
esp32-sbc-fabgl.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
esp32-sbc-fabgl.menu.LoopCore.0=Core 0
|
|
esp32-sbc-fabgl.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
esp32-sbc-fabgl.menu.EventsCore.1=Core 1
|
|
esp32-sbc-fabgl.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
esp32-sbc-fabgl.menu.EventsCore.0=Core 0
|
|
esp32-sbc-fabgl.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
esp32-sbc-fabgl.menu.DebugLevel.none=None
|
|
esp32-sbc-fabgl.menu.DebugLevel.none.build.code_debug=0
|
|
esp32-sbc-fabgl.menu.DebugLevel.error=Error
|
|
esp32-sbc-fabgl.menu.DebugLevel.error.build.code_debug=1
|
|
esp32-sbc-fabgl.menu.DebugLevel.warn=Warn
|
|
esp32-sbc-fabgl.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32-sbc-fabgl.menu.DebugLevel.info=Info
|
|
esp32-sbc-fabgl.menu.DebugLevel.info.build.code_debug=3
|
|
esp32-sbc-fabgl.menu.DebugLevel.debug=Debug
|
|
esp32-sbc-fabgl.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32-sbc-fabgl.menu.DebugLevel.verbose=Verbose
|
|
esp32-sbc-fabgl.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32-sbc-fabgl.menu.EraseFlash.none=Disabled
|
|
esp32-sbc-fabgl.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32-sbc-fabgl.menu.EraseFlash.all=Enabled
|
|
esp32-sbc-fabgl.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
esp32-sbc-fabgl.menu.ZigbeeMode.default=Disabled
|
|
esp32-sbc-fabgl.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
esp32-sbc-fabgl.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
esp32-sbc-fabgl.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
esp32-sbc-fabgl.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
esp32-sbc-fabgl.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
espino32.name=ThaiEasyElec's ESPino32
|
|
|
|
espino32.bootloader.tool=esptool_py
|
|
espino32.bootloader.tool.default=esptool_py
|
|
|
|
espino32.upload.tool=esptool_py
|
|
espino32.upload.tool.default=esptool_py
|
|
espino32.upload.tool.network=esp_ota
|
|
|
|
espino32.upload.maximum_size=1310720
|
|
espino32.upload.maximum_data_size=327680
|
|
espino32.upload.flags=
|
|
espino32.upload.extra_flags=
|
|
|
|
espino32.serial.disableDTR=true
|
|
espino32.serial.disableRTS=true
|
|
|
|
espino32.build.tarch=xtensa
|
|
espino32.build.bootloader_addr=0x1000
|
|
espino32.build.target=esp32
|
|
espino32.build.mcu=esp32
|
|
espino32.build.core=esp32
|
|
espino32.build.variant=espino32
|
|
espino32.build.board=ESPino32
|
|
|
|
espino32.build.f_cpu=240000000L
|
|
espino32.build.flash_mode=dio
|
|
espino32.build.flash_size=4MB
|
|
espino32.build.boot=dio
|
|
espino32.build.partitions=default
|
|
espino32.build.defines=
|
|
|
|
espino32.menu.FlashFreq.80=80MHz
|
|
espino32.menu.FlashFreq.80.build.flash_freq=80m
|
|
espino32.menu.FlashFreq.40=40MHz
|
|
espino32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
espino32.menu.UploadSpeed.921600=921600
|
|
espino32.menu.UploadSpeed.921600.upload.speed=921600
|
|
espino32.menu.UploadSpeed.115200=115200
|
|
espino32.menu.UploadSpeed.115200.upload.speed=115200
|
|
espino32.menu.UploadSpeed.256000.windows=256000
|
|
espino32.menu.UploadSpeed.256000.upload.speed=256000
|
|
espino32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
espino32.menu.UploadSpeed.230400=230400
|
|
espino32.menu.UploadSpeed.230400.upload.speed=230400
|
|
espino32.menu.UploadSpeed.460800.linux=460800
|
|
espino32.menu.UploadSpeed.460800.macosx=460800
|
|
espino32.menu.UploadSpeed.460800.upload.speed=460800
|
|
espino32.menu.UploadSpeed.512000.windows=512000
|
|
espino32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
espino32.menu.DebugLevel.none=None
|
|
espino32.menu.DebugLevel.none.build.code_debug=0
|
|
espino32.menu.DebugLevel.error=Error
|
|
espino32.menu.DebugLevel.error.build.code_debug=1
|
|
espino32.menu.DebugLevel.warn=Warn
|
|
espino32.menu.DebugLevel.warn.build.code_debug=2
|
|
espino32.menu.DebugLevel.info=Info
|
|
espino32.menu.DebugLevel.info.build.code_debug=3
|
|
espino32.menu.DebugLevel.debug=Debug
|
|
espino32.menu.DebugLevel.debug.build.code_debug=4
|
|
espino32.menu.DebugLevel.verbose=Verbose
|
|
espino32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
espino32.menu.EraseFlash.none=Disabled
|
|
espino32.menu.EraseFlash.none.upload.erase_cmd=
|
|
espino32.menu.EraseFlash.all=Enabled
|
|
espino32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_core.name=M5Core
|
|
|
|
m5stack_core.bootloader.tool=esptool_py
|
|
m5stack_core.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_core.upload.tool=esptool_py
|
|
m5stack_core.upload.tool.default=esptool_py
|
|
m5stack_core.upload.tool.network=esp_ota
|
|
|
|
m5stack_core.upload.maximum_size=1310720
|
|
m5stack_core.upload.maximum_data_size=327680
|
|
m5stack_core.upload.flags=
|
|
m5stack_core.upload.extra_flags=
|
|
|
|
m5stack_core.serial.disableDTR=true
|
|
m5stack_core.serial.disableRTS=true
|
|
|
|
m5stack_core.build.tarch=xtensa
|
|
m5stack_core.build.bootloader_addr=0x1000
|
|
m5stack_core.build.target=esp32
|
|
m5stack_core.build.mcu=esp32
|
|
m5stack_core.build.core=esp32
|
|
m5stack_core.build.variant=m5stack_core
|
|
m5stack_core.build.board=M5STACK_CORE
|
|
|
|
m5stack_core.build.f_cpu=240000000L
|
|
m5stack_core.build.flash_size=4MB
|
|
m5stack_core.build.flash_freq=80m
|
|
m5stack_core.build.flash_mode=dio
|
|
m5stack_core.build.boot=dio
|
|
m5stack_core.build.partitions=default
|
|
m5stack_core.build.defines=
|
|
m5stack_core.build.loop_core=
|
|
m5stack_core.build.event_core=
|
|
|
|
m5stack_core.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_core.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_core.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_core.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_core.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_core.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_core.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_core.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_core.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_core.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_core.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_core.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_core.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_core.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_core.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_core.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_core.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_core.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_core.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_core.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_core.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_core.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_core.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_core.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_core.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_core.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_core.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_core.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_core.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_core.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_core.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_core.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_core.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_core.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_core.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_core.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_core.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
m5stack_core.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
m5stack_core.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
m5stack_core.menu.PartitionScheme.custom=Custom
|
|
m5stack_core.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_core.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_core.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
m5stack_core.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_core.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
m5stack_core.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_core.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
m5stack_core.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_core.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
m5stack_core.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_core.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
m5stack_core.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
m5stack_core.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
m5stack_core.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_core.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
m5stack_core.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
m5stack_core.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
m5stack_core.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_core.menu.FlashMode.qio=QIO
|
|
m5stack_core.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_core.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_core.menu.FlashMode.dio=DIO
|
|
m5stack_core.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_core.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_core.menu.FlashMode.qout=QOUT
|
|
m5stack_core.menu.FlashMode.qout.build.flash_mode=dout
|
|
m5stack_core.menu.FlashMode.qout.build.boot=qout
|
|
m5stack_core.menu.FlashMode.dout=DOUT
|
|
m5stack_core.menu.FlashMode.dout.build.flash_mode=dout
|
|
m5stack_core.menu.FlashMode.dout.build.boot=dout
|
|
|
|
m5stack_core.menu.FlashFreq.80=80MHz
|
|
m5stack_core.menu.FlashFreq.80.build.flash_freq=80m
|
|
m5stack_core.menu.FlashFreq.40=40MHz
|
|
m5stack_core.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
m5stack_core.menu.FlashSize.4M=4MB (32Mb)
|
|
m5stack_core.menu.FlashSize.4M.build.flash_size=4MB
|
|
m5stack_core.menu.FlashSize.16M=16MB (128Mb)
|
|
m5stack_core.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
m5stack_core.menu.UploadSpeed.1500000=1500000
|
|
m5stack_core.menu.UploadSpeed.1500000.upload.speed=1500000
|
|
m5stack_core.menu.UploadSpeed.921600=921600
|
|
m5stack_core.menu.UploadSpeed.921600.upload.speed=921600
|
|
m5stack_core.menu.UploadSpeed.115200=115200
|
|
m5stack_core.menu.UploadSpeed.115200.upload.speed=115200
|
|
m5stack_core.menu.UploadSpeed.256000.windows=256000
|
|
m5stack_core.menu.UploadSpeed.256000.upload.speed=256000
|
|
m5stack_core.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
m5stack_core.menu.UploadSpeed.230400=230400
|
|
m5stack_core.menu.UploadSpeed.230400.upload.speed=230400
|
|
m5stack_core.menu.UploadSpeed.460800.linux=460800
|
|
m5stack_core.menu.UploadSpeed.460800.macosx=460800
|
|
m5stack_core.menu.UploadSpeed.460800.upload.speed=460800
|
|
m5stack_core.menu.UploadSpeed.512000.windows=512000
|
|
m5stack_core.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
m5stack_core.menu.LoopCore.1=Core 1
|
|
m5stack_core.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_core.menu.LoopCore.0=Core 0
|
|
m5stack_core.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_core.menu.EventsCore.1=Core 1
|
|
m5stack_core.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_core.menu.EventsCore.0=Core 0
|
|
m5stack_core.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_core.menu.DebugLevel.none=None
|
|
m5stack_core.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_core.menu.DebugLevel.error=Error
|
|
m5stack_core.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_core.menu.DebugLevel.warn=Warn
|
|
m5stack_core.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_core.menu.DebugLevel.info=Info
|
|
m5stack_core.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_core.menu.DebugLevel.debug=Debug
|
|
m5stack_core.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_core.menu.DebugLevel.verbose=Verbose
|
|
m5stack_core.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_core.menu.EraseFlash.none=Disabled
|
|
m5stack_core.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_core.menu.EraseFlash.all=Enabled
|
|
m5stack_core.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_fire.name=M5Fire
|
|
|
|
m5stack_fire.bootloader.tool=esptool_py
|
|
m5stack_fire.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_fire.upload.tool=esptool_py
|
|
m5stack_fire.upload.tool.default=esptool_py
|
|
m5stack_fire.upload.tool.network=esp_ota
|
|
|
|
m5stack_fire.upload.maximum_size=6553600
|
|
m5stack_fire.upload.maximum_data_size=4521984
|
|
m5stack_fire.upload.flags=
|
|
m5stack_fire.upload.extra_flags=
|
|
|
|
m5stack_fire.serial.disableDTR=true
|
|
m5stack_fire.serial.disableRTS=true
|
|
|
|
m5stack_fire.build.tarch=xtensa
|
|
m5stack_fire.build.bootloader_addr=0x1000
|
|
m5stack_fire.build.target=esp32
|
|
m5stack_fire.build.mcu=esp32
|
|
m5stack_fire.build.core=esp32
|
|
m5stack_fire.build.variant=m5stack_fire
|
|
m5stack_fire.build.board=M5STACK_FIRE
|
|
|
|
m5stack_fire.build.f_cpu=240000000L
|
|
m5stack_fire.build.flash_size=16MB
|
|
m5stack_fire.build.flash_freq=80m
|
|
m5stack_fire.build.flash_mode=dio
|
|
m5stack_fire.build.boot=dio
|
|
m5stack_fire.build.partitions=default
|
|
m5stack_fire.build.defines=
|
|
m5stack_fire.build.loop_core=
|
|
m5stack_fire.build.event_core=
|
|
|
|
m5stack_fire.menu.PSRAM.enabled=Enabled
|
|
m5stack_fire.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
m5stack_fire.menu.PSRAM.enabled.build.extra_libs=
|
|
m5stack_fire.menu.PSRAM.disabled=Disabled
|
|
m5stack_fire.menu.PSRAM.disabled.build.defines=
|
|
m5stack_fire.menu.PSRAM.disabled.build.extra_libs=
|
|
|
|
m5stack_fire.menu.PartitionScheme.default=Default (2 x 6.5 MB app, 3.6 MB SPIFFS)
|
|
m5stack_fire.menu.PartitionScheme.default.build.partitions=default_16MB
|
|
m5stack_fire.menu.PartitionScheme.default.upload.maximum_size=6553600
|
|
m5stack_fire.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_fire.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_fire.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_fire.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_fire.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_fire.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_fire.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_fire.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_fire.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_fire.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_fire.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_fire.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_fire.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_fire.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_fire.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_fire.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_fire.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_fire.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_fire.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_fire.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_fire.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_fire.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_fire.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_fire.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_fire.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_fire.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_fire.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_fire.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_fire.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
m5stack_fire.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
m5stack_fire.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
m5stack_fire.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_fire.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_fire.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_fire.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_fire.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_fire.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_fire.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
m5stack_fire.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
m5stack_fire.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
m5stack_fire.menu.PartitionScheme.custom=Custom
|
|
m5stack_fire.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_fire.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_fire.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
m5stack_fire.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_fire.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
m5stack_fire.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_fire.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
m5stack_fire.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_fire.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
m5stack_fire.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_fire.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
m5stack_fire.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
m5stack_fire.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
m5stack_fire.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_fire.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
m5stack_fire.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
m5stack_fire.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
m5stack_fire.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_fire.menu.FlashMode.qio=QIO
|
|
m5stack_fire.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_fire.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_fire.menu.FlashMode.dio=DIO
|
|
m5stack_fire.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_fire.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_fire.menu.FlashMode.qout=QOUT
|
|
m5stack_fire.menu.FlashMode.qout.build.flash_mode=dout
|
|
m5stack_fire.menu.FlashMode.qout.build.boot=qout
|
|
m5stack_fire.menu.FlashMode.dout=DOUT
|
|
m5stack_fire.menu.FlashMode.dout.build.flash_mode=dout
|
|
m5stack_fire.menu.FlashMode.dout.build.boot=dout
|
|
|
|
m5stack_fire.menu.FlashFreq.80=80MHz
|
|
m5stack_fire.menu.FlashFreq.80.build.flash_freq=80m
|
|
m5stack_fire.menu.FlashFreq.40=40MHz
|
|
m5stack_fire.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
m5stack_fire.menu.FlashSize.16M=16MB (128Mb)
|
|
m5stack_fire.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
m5stack_fire.menu.UploadSpeed.1500000=1500000
|
|
m5stack_fire.menu.UploadSpeed.1500000.upload.speed=1500000
|
|
m5stack_fire.menu.UploadSpeed.921600=921600
|
|
m5stack_fire.menu.UploadSpeed.921600.upload.speed=921600
|
|
m5stack_fire.menu.UploadSpeed.115200=115200
|
|
m5stack_fire.menu.UploadSpeed.115200.upload.speed=115200
|
|
m5stack_fire.menu.UploadSpeed.256000.windows=256000
|
|
m5stack_fire.menu.UploadSpeed.256000.upload.speed=256000
|
|
m5stack_fire.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
m5stack_fire.menu.UploadSpeed.230400=230400
|
|
m5stack_fire.menu.UploadSpeed.230400.upload.speed=230400
|
|
m5stack_fire.menu.UploadSpeed.460800.linux=460800
|
|
m5stack_fire.menu.UploadSpeed.460800.macosx=460800
|
|
m5stack_fire.menu.UploadSpeed.460800.upload.speed=460800
|
|
m5stack_fire.menu.UploadSpeed.512000.windows=512000
|
|
m5stack_fire.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
m5stack_fire.menu.LoopCore.1=Core 1
|
|
m5stack_fire.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_fire.menu.LoopCore.0=Core 0
|
|
m5stack_fire.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_fire.menu.EventsCore.1=Core 1
|
|
m5stack_fire.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_fire.menu.EventsCore.0=Core 0
|
|
m5stack_fire.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_fire.menu.DebugLevel.none=None
|
|
m5stack_fire.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_fire.menu.DebugLevel.error=Error
|
|
m5stack_fire.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_fire.menu.DebugLevel.warn=Warn
|
|
m5stack_fire.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_fire.menu.DebugLevel.info=Info
|
|
m5stack_fire.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_fire.menu.DebugLevel.debug=Debug
|
|
m5stack_fire.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_fire.menu.DebugLevel.verbose=Verbose
|
|
m5stack_fire.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_fire.menu.EraseFlash.none=Disabled
|
|
m5stack_fire.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_fire.menu.EraseFlash.all=Enabled
|
|
m5stack_fire.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_core2.name=M5Core2
|
|
|
|
m5stack_core2.bootloader.tool=esptool_py
|
|
m5stack_core2.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_core2.upload.tool=esptool_py
|
|
m5stack_core2.upload.tool.default=esptool_py
|
|
m5stack_core2.upload.tool.network=esp_ota
|
|
|
|
m5stack_core2.upload.maximum_size=6553600
|
|
m5stack_core2.upload.maximum_data_size=4521984
|
|
m5stack_core2.upload.flags=
|
|
m5stack_core2.upload.extra_flags=
|
|
|
|
m5stack_core2.serial.disableDTR=true
|
|
m5stack_core2.serial.disableRTS=true
|
|
|
|
m5stack_core2.build.tarch=xtensa
|
|
m5stack_core2.build.bootloader_addr=0x1000
|
|
m5stack_core2.build.target=esp32
|
|
m5stack_core2.build.mcu=esp32
|
|
m5stack_core2.build.core=esp32
|
|
m5stack_core2.build.variant=m5stack_core2
|
|
m5stack_core2.build.board=M5STACK_CORE2
|
|
|
|
m5stack_core2.build.f_cpu=240000000L
|
|
m5stack_core2.build.flash_size=16MB
|
|
m5stack_core2.build.flash_freq=80m
|
|
m5stack_core2.build.flash_mode=dio
|
|
m5stack_core2.build.boot=dio
|
|
m5stack_core2.build.partitions=default
|
|
m5stack_core2.build.defines=
|
|
m5stack_core2.build.loop_core=
|
|
m5stack_core2.build.event_core=
|
|
|
|
m5stack_core2.menu.PSRAM.enabled=Enabled
|
|
m5stack_core2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
m5stack_core2.menu.PSRAM.enabled.build.extra_libs=
|
|
m5stack_core2.menu.PSRAM.disabled=Disabled
|
|
m5stack_core2.menu.PSRAM.disabled.build.defines=
|
|
m5stack_core2.menu.PSRAM.disabled.build.extra_libs=
|
|
|
|
m5stack_core2.menu.PartitionScheme.default=Default (2 x 6.5 MB app, 3.6 MB SPIFFS)
|
|
m5stack_core2.menu.PartitionScheme.default.build.partitions=default_16MB
|
|
m5stack_core2.menu.PartitionScheme.default.upload.maximum_size=6553600
|
|
m5stack_core2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_core2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_core2.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_core2.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_core2.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_core2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_core2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_core2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_core2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_core2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_core2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_core2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_core2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_core2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_core2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_core2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_core2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_core2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_core2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_core2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_core2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_core2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_core2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_core2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_core2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_core2.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_core2.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_core2.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_core2.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
m5stack_core2.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
m5stack_core2.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
m5stack_core2.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_core2.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_core2.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_core2.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_core2.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_core2.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_core2.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
m5stack_core2.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
m5stack_core2.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
m5stack_core2.menu.PartitionScheme.custom=Custom
|
|
m5stack_core2.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_core2.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_core2.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
m5stack_core2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_core2.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
m5stack_core2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_core2.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
m5stack_core2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_core2.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
m5stack_core2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_core2.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
m5stack_core2.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
m5stack_core2.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
m5stack_core2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_core2.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
m5stack_core2.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
m5stack_core2.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
m5stack_core2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_core2.menu.FlashMode.qio=QIO
|
|
m5stack_core2.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_core2.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_core2.menu.FlashMode.dio=DIO
|
|
m5stack_core2.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_core2.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_core2.menu.FlashMode.qout=QOUT
|
|
m5stack_core2.menu.FlashMode.qout.build.flash_mode=dout
|
|
m5stack_core2.menu.FlashMode.qout.build.boot=qout
|
|
m5stack_core2.menu.FlashMode.dout=DOUT
|
|
m5stack_core2.menu.FlashMode.dout.build.flash_mode=dout
|
|
m5stack_core2.menu.FlashMode.dout.build.boot=dout
|
|
|
|
m5stack_core2.menu.FlashFreq.80=80MHz
|
|
m5stack_core2.menu.FlashFreq.80.build.flash_freq=80m
|
|
m5stack_core2.menu.FlashFreq.40=40MHz
|
|
m5stack_core2.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
m5stack_core2.menu.FlashSize.16M=16MB (128Mb)
|
|
m5stack_core2.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
m5stack_core2.menu.UploadSpeed.1500000=1500000
|
|
m5stack_core2.menu.UploadSpeed.1500000.upload.speed=1500000
|
|
m5stack_core2.menu.UploadSpeed.921600=921600
|
|
m5stack_core2.menu.UploadSpeed.921600.upload.speed=921600
|
|
m5stack_core2.menu.UploadSpeed.115200=115200
|
|
m5stack_core2.menu.UploadSpeed.115200.upload.speed=115200
|
|
m5stack_core2.menu.UploadSpeed.256000.windows=256000
|
|
m5stack_core2.menu.UploadSpeed.256000.upload.speed=256000
|
|
m5stack_core2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
m5stack_core2.menu.UploadSpeed.230400=230400
|
|
m5stack_core2.menu.UploadSpeed.230400.upload.speed=230400
|
|
m5stack_core2.menu.UploadSpeed.460800.linux=460800
|
|
m5stack_core2.menu.UploadSpeed.460800.macosx=460800
|
|
m5stack_core2.menu.UploadSpeed.460800.upload.speed=460800
|
|
m5stack_core2.menu.UploadSpeed.512000.windows=512000
|
|
m5stack_core2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
m5stack_core2.menu.LoopCore.1=Core 1
|
|
m5stack_core2.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_core2.menu.LoopCore.0=Core 0
|
|
m5stack_core2.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_core2.menu.EventsCore.1=Core 1
|
|
m5stack_core2.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_core2.menu.EventsCore.0=Core 0
|
|
m5stack_core2.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_core2.menu.DebugLevel.none=None
|
|
m5stack_core2.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_core2.menu.DebugLevel.error=Error
|
|
m5stack_core2.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_core2.menu.DebugLevel.warn=Warn
|
|
m5stack_core2.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_core2.menu.DebugLevel.info=Info
|
|
m5stack_core2.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_core2.menu.DebugLevel.debug=Debug
|
|
m5stack_core2.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_core2.menu.DebugLevel.verbose=Verbose
|
|
m5stack_core2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_core2.menu.EraseFlash.none=Disabled
|
|
m5stack_core2.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_core2.menu.EraseFlash.all=Enabled
|
|
m5stack_core2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_tough.name=M5Tough
|
|
|
|
m5stack_tough.bootloader.tool=esptool_py
|
|
m5stack_tough.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_tough.upload.tool=esptool_py
|
|
m5stack_tough.upload.tool.default=esptool_py
|
|
m5stack_tough.upload.tool.network=esp_ota
|
|
|
|
m5stack_tough.upload.maximum_size=6553600
|
|
m5stack_tough.upload.maximum_data_size=4521984
|
|
m5stack_tough.upload.flags=
|
|
m5stack_tough.upload.extra_flags=
|
|
|
|
m5stack_tough.serial.disableDTR=true
|
|
m5stack_tough.serial.disableRTS=true
|
|
|
|
m5stack_tough.build.tarch=xtensa
|
|
m5stack_tough.build.bootloader_addr=0x1000
|
|
m5stack_tough.build.target=esp32
|
|
m5stack_tough.build.mcu=esp32
|
|
m5stack_tough.build.core=esp32
|
|
m5stack_tough.build.variant=m5stack_tough
|
|
m5stack_tough.build.board=M5STACK_TOUGH
|
|
|
|
m5stack_tough.build.f_cpu=240000000L
|
|
m5stack_tough.build.flash_size=16MB
|
|
m5stack_tough.build.flash_freq=80m
|
|
m5stack_tough.build.flash_mode=dio
|
|
m5stack_tough.build.boot=dio
|
|
m5stack_tough.build.partitions=default
|
|
m5stack_tough.build.defines=
|
|
m5stack_tough.build.loop_core=
|
|
m5stack_tough.build.event_core=
|
|
|
|
m5stack_tough.menu.PSRAM.enabled=Enabled
|
|
m5stack_tough.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
m5stack_tough.menu.PSRAM.enabled.build.extra_libs=
|
|
m5stack_tough.menu.PSRAM.disabled=Disabled
|
|
m5stack_tough.menu.PSRAM.disabled.build.defines=
|
|
m5stack_tough.menu.PSRAM.disabled.build.extra_libs=
|
|
|
|
m5stack_tough.menu.PartitionScheme.default=Default (2 x 6.5 MB app, 3.6 MB SPIFFS)
|
|
m5stack_tough.menu.PartitionScheme.default.build.partitions=default_16MB
|
|
m5stack_tough.menu.PartitionScheme.default.upload.maximum_size=6553600
|
|
m5stack_tough.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_tough.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_tough.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_tough.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_tough.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_tough.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_tough.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_tough.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_tough.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_tough.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_tough.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_tough.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_tough.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_tough.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_tough.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_tough.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_tough.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_tough.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_tough.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_tough.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_tough.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_tough.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_tough.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_tough.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_tough.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_tough.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_tough.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_tough.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_tough.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
m5stack_tough.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
m5stack_tough.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
m5stack_tough.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_tough.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_tough.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_tough.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_tough.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_tough.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_tough.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
m5stack_tough.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
m5stack_tough.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
m5stack_tough.menu.PartitionScheme.custom=Custom
|
|
m5stack_tough.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_tough.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_tough.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
m5stack_tough.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_tough.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
m5stack_tough.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_tough.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
m5stack_tough.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_tough.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
m5stack_tough.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_tough.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
m5stack_tough.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
m5stack_tough.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
m5stack_tough.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_tough.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
m5stack_tough.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
m5stack_tough.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
m5stack_tough.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_tough.menu.FlashMode.qio=QIO
|
|
m5stack_tough.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_tough.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_tough.menu.FlashMode.dio=DIO
|
|
m5stack_tough.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_tough.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_tough.menu.FlashMode.qout=QOUT
|
|
m5stack_tough.menu.FlashMode.qout.build.flash_mode=dout
|
|
m5stack_tough.menu.FlashMode.qout.build.boot=qout
|
|
m5stack_tough.menu.FlashMode.dout=DOUT
|
|
m5stack_tough.menu.FlashMode.dout.build.flash_mode=dout
|
|
m5stack_tough.menu.FlashMode.dout.build.boot=dout
|
|
|
|
m5stack_tough.menu.FlashFreq.80=80MHz
|
|
m5stack_tough.menu.FlashFreq.80.build.flash_freq=80m
|
|
m5stack_tough.menu.FlashFreq.40=40MHz
|
|
m5stack_tough.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
m5stack_tough.menu.FlashSize.16M=16MB (128Mb)
|
|
m5stack_tough.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
m5stack_tough.menu.UploadSpeed.1500000=1500000
|
|
m5stack_tough.menu.UploadSpeed.1500000.upload.speed=1500000
|
|
m5stack_tough.menu.UploadSpeed.921600=921600
|
|
m5stack_tough.menu.UploadSpeed.921600.upload.speed=921600
|
|
m5stack_tough.menu.UploadSpeed.115200=115200
|
|
m5stack_tough.menu.UploadSpeed.115200.upload.speed=115200
|
|
m5stack_tough.menu.UploadSpeed.256000.windows=256000
|
|
m5stack_tough.menu.UploadSpeed.256000.upload.speed=256000
|
|
m5stack_tough.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
m5stack_tough.menu.UploadSpeed.230400=230400
|
|
m5stack_tough.menu.UploadSpeed.230400.upload.speed=230400
|
|
m5stack_tough.menu.UploadSpeed.460800.linux=460800
|
|
m5stack_tough.menu.UploadSpeed.460800.macosx=460800
|
|
m5stack_tough.menu.UploadSpeed.460800.upload.speed=460800
|
|
m5stack_tough.menu.UploadSpeed.512000.windows=512000
|
|
m5stack_tough.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
m5stack_tough.menu.LoopCore.1=Core 1
|
|
m5stack_tough.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_tough.menu.LoopCore.0=Core 0
|
|
m5stack_tough.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_tough.menu.EventsCore.1=Core 1
|
|
m5stack_tough.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_tough.menu.EventsCore.0=Core 0
|
|
m5stack_tough.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_tough.menu.DebugLevel.none=None
|
|
m5stack_tough.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_tough.menu.DebugLevel.error=Error
|
|
m5stack_tough.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_tough.menu.DebugLevel.warn=Warn
|
|
m5stack_tough.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_tough.menu.DebugLevel.info=Info
|
|
m5stack_tough.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_tough.menu.DebugLevel.debug=Debug
|
|
m5stack_tough.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_tough.menu.DebugLevel.verbose=Verbose
|
|
m5stack_tough.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_tough.menu.EraseFlash.none=Disabled
|
|
m5stack_tough.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_tough.menu.EraseFlash.all=Enabled
|
|
m5stack_tough.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_station.name=M5Station
|
|
|
|
m5stack_station.bootloader.tool=esptool_py
|
|
m5stack_station.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_station.upload.tool=esptool_py
|
|
m5stack_station.upload.tool.default=esptool_py
|
|
m5stack_station.upload.tool.network=esp_ota
|
|
|
|
m5stack_station.upload.maximum_size=6553600
|
|
m5stack_station.upload.maximum_data_size=4521984
|
|
m5stack_station.upload.flags=
|
|
m5stack_station.upload.extra_flags=
|
|
|
|
m5stack_station.serial.disableDTR=true
|
|
m5stack_station.serial.disableRTS=true
|
|
|
|
m5stack_station.build.tarch=xtensa
|
|
m5stack_station.build.bootloader_addr=0x1000
|
|
m5stack_station.build.target=esp32
|
|
m5stack_station.build.mcu=esp32
|
|
m5stack_station.build.core=esp32
|
|
m5stack_station.build.variant=m5stack_station
|
|
m5stack_station.build.board=M5STACK_STATION
|
|
|
|
m5stack_station.build.f_cpu=240000000L
|
|
m5stack_station.build.flash_size=16MB
|
|
m5stack_station.build.flash_freq=80m
|
|
m5stack_station.build.flash_mode=dio
|
|
m5stack_station.build.boot=dio
|
|
m5stack_station.build.partitions=default
|
|
m5stack_station.build.defines=
|
|
m5stack_station.build.loop_core=
|
|
m5stack_station.build.event_core=
|
|
|
|
m5stack_station.menu.PartitionScheme.default=Default (2 x 6.5 MB app, 3.6 MB SPIFFS)
|
|
m5stack_station.menu.PartitionScheme.default.build.partitions=default_16MB
|
|
m5stack_station.menu.PartitionScheme.default.upload.maximum_size=6553600
|
|
m5stack_station.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_station.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_station.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_station.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_station.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_station.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_station.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_station.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_station.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_station.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_station.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_station.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_station.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_station.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_station.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_station.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_station.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_station.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_station.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_station.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_station.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_station.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_station.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_station.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_station.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_station.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_station.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_station.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_station.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
m5stack_station.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
m5stack_station.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
m5stack_station.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_station.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_station.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_station.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_station.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_station.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_station.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
m5stack_station.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
m5stack_station.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
m5stack_station.menu.PartitionScheme.custom=Custom
|
|
m5stack_station.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_station.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_station.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
m5stack_station.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_station.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
m5stack_station.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_station.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
m5stack_station.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_station.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
m5stack_station.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_station.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
m5stack_station.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
m5stack_station.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
m5stack_station.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_station.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
m5stack_station.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
m5stack_station.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
m5stack_station.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_station.menu.FlashMode.qio=QIO
|
|
m5stack_station.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_station.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_station.menu.FlashMode.dio=DIO
|
|
m5stack_station.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_station.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_station.menu.FlashMode.qout=QOUT
|
|
m5stack_station.menu.FlashMode.qout.build.flash_mode=dout
|
|
m5stack_station.menu.FlashMode.qout.build.boot=qout
|
|
m5stack_station.menu.FlashMode.dout=DOUT
|
|
m5stack_station.menu.FlashMode.dout.build.flash_mode=dout
|
|
m5stack_station.menu.FlashMode.dout.build.boot=dout
|
|
|
|
m5stack_station.menu.FlashFreq.80=80MHz
|
|
m5stack_station.menu.FlashFreq.80.build.flash_freq=80m
|
|
m5stack_station.menu.FlashFreq.40=40MHz
|
|
m5stack_station.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
m5stack_station.menu.FlashSize.16M=16MB (128Mb)
|
|
m5stack_station.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
m5stack_station.menu.UploadSpeed.1500000=1500000
|
|
m5stack_station.menu.UploadSpeed.1500000.upload.speed=1500000
|
|
m5stack_station.menu.UploadSpeed.921600=921600
|
|
m5stack_station.menu.UploadSpeed.921600.upload.speed=921600
|
|
m5stack_station.menu.UploadSpeed.115200=115200
|
|
m5stack_station.menu.UploadSpeed.115200.upload.speed=115200
|
|
m5stack_station.menu.UploadSpeed.256000.windows=256000
|
|
m5stack_station.menu.UploadSpeed.256000.upload.speed=256000
|
|
m5stack_station.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
m5stack_station.menu.UploadSpeed.230400=230400
|
|
m5stack_station.menu.UploadSpeed.230400.upload.speed=230400
|
|
m5stack_station.menu.UploadSpeed.460800.linux=460800
|
|
m5stack_station.menu.UploadSpeed.460800.macosx=460800
|
|
m5stack_station.menu.UploadSpeed.460800.upload.speed=460800
|
|
m5stack_station.menu.UploadSpeed.512000.windows=512000
|
|
m5stack_station.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
m5stack_station.menu.LoopCore.1=Core 1
|
|
m5stack_station.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_station.menu.LoopCore.0=Core 0
|
|
m5stack_station.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_station.menu.EventsCore.1=Core 1
|
|
m5stack_station.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_station.menu.EventsCore.0=Core 0
|
|
m5stack_station.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_station.menu.DebugLevel.none=None
|
|
m5stack_station.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_station.menu.DebugLevel.error=Error
|
|
m5stack_station.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_station.menu.DebugLevel.warn=Warn
|
|
m5stack_station.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_station.menu.DebugLevel.info=Info
|
|
m5stack_station.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_station.menu.DebugLevel.debug=Debug
|
|
m5stack_station.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_station.menu.DebugLevel.verbose=Verbose
|
|
m5stack_station.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_station.menu.EraseFlash.none=Disabled
|
|
m5stack_station.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_station.menu.EraseFlash.all=Enabled
|
|
m5stack_station.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_stickc.name=M5StickC
|
|
|
|
m5stack_stickc.bootloader.tool=esptool_py
|
|
m5stack_stickc.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_stickc.upload.tool=esptool_py
|
|
m5stack_stickc.upload.tool.default=esptool_py
|
|
m5stack_stickc.upload.tool.network=esp_ota
|
|
|
|
m5stack_stickc.upload.maximum_size=1310720
|
|
m5stack_stickc.upload.maximum_data_size=327680
|
|
m5stack_stickc.upload.flags=
|
|
m5stack_stickc.upload.extra_flags=
|
|
|
|
m5stack_stickc.serial.disableDTR=true
|
|
m5stack_stickc.serial.disableRTS=true
|
|
|
|
m5stack_stickc.build.tarch=xtensa
|
|
m5stack_stickc.build.bootloader_addr=0x1000
|
|
m5stack_stickc.build.target=esp32
|
|
m5stack_stickc.build.mcu=esp32
|
|
m5stack_stickc.build.core=esp32
|
|
m5stack_stickc.build.variant=m5stack_stickc
|
|
m5stack_stickc.build.board=M5STACK_STICKC
|
|
|
|
m5stack_stickc.build.f_cpu=240000000L
|
|
m5stack_stickc.build.flash_size=4MB
|
|
m5stack_stickc.build.flash_freq=80m
|
|
m5stack_stickc.build.flash_mode=dio
|
|
m5stack_stickc.build.boot=dio
|
|
m5stack_stickc.build.partitions=huge_app
|
|
m5stack_stickc.build.defines=
|
|
m5stack_stickc.build.loop_core=
|
|
m5stack_stickc.build.event_core=
|
|
|
|
m5stack_stickc.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_stickc.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_stickc.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_stickc.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_stickc.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_stickc.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_stickc.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_stickc.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_stickc.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_stickc.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_stickc.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_stickc.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_stickc.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_stickc.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_stickc.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_stickc.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_stickc.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_stickc.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_stickc.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_stickc.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_stickc.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_stickc.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_stickc.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_stickc.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_stickc.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_stickc.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_stickc.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_stickc.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_stickc.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_stickc.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_stickc.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_stickc.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_stickc.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_stickc.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_stickc.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_stickc.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_stickc.menu.PartitionScheme.custom=Custom
|
|
m5stack_stickc.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_stickc.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_stickc.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
m5stack_stickc.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_stickc.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
m5stack_stickc.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_stickc.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
m5stack_stickc.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_stickc.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
m5stack_stickc.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_stickc.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
m5stack_stickc.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
m5stack_stickc.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
m5stack_stickc.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_stickc.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
m5stack_stickc.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
m5stack_stickc.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
m5stack_stickc.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_stickc.menu.FlashMode.qio=QIO
|
|
m5stack_stickc.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_stickc.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_stickc.menu.FlashMode.dio=DIO
|
|
m5stack_stickc.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_stickc.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_stickc.menu.FlashMode.qout=QOUT
|
|
m5stack_stickc.menu.FlashMode.qout.build.flash_mode=dout
|
|
m5stack_stickc.menu.FlashMode.qout.build.boot=qout
|
|
m5stack_stickc.menu.FlashMode.dout=DOUT
|
|
m5stack_stickc.menu.FlashMode.dout.build.flash_mode=dout
|
|
m5stack_stickc.menu.FlashMode.dout.build.boot=dout
|
|
|
|
m5stack_stickc.menu.FlashFreq.80=80MHz
|
|
m5stack_stickc.menu.FlashFreq.80.build.flash_freq=80m
|
|
m5stack_stickc.menu.FlashFreq.40=40MHz
|
|
m5stack_stickc.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
m5stack_stickc.menu.FlashSize.4M=4MB (32Mb)
|
|
m5stack_stickc.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
m5stack_stickc.menu.UploadSpeed.1500000=1500000
|
|
m5stack_stickc.menu.UploadSpeed.1500000.upload.speed=1500000
|
|
m5stack_stickc.menu.UploadSpeed.750000=750000
|
|
m5stack_stickc.menu.UploadSpeed.750000.upload.speed=750000
|
|
m5stack_stickc.menu.UploadSpeed.500000=500000
|
|
m5stack_stickc.menu.UploadSpeed.500000.upload.speed=500000
|
|
m5stack_stickc.menu.UploadSpeed.250000=250000
|
|
m5stack_stickc.menu.UploadSpeed.250000.upload.speed=250000
|
|
m5stack_stickc.menu.UploadSpeed.115200=115200
|
|
m5stack_stickc.menu.UploadSpeed.115200.upload.speed=115200
|
|
|
|
m5stack_stickc.menu.LoopCore.1=Core 1
|
|
m5stack_stickc.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_stickc.menu.LoopCore.0=Core 0
|
|
m5stack_stickc.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_stickc.menu.EventsCore.1=Core 1
|
|
m5stack_stickc.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_stickc.menu.EventsCore.0=Core 0
|
|
m5stack_stickc.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_stickc.menu.DebugLevel.none=None
|
|
m5stack_stickc.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_stickc.menu.DebugLevel.error=Error
|
|
m5stack_stickc.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_stickc.menu.DebugLevel.warn=Warn
|
|
m5stack_stickc.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_stickc.menu.DebugLevel.info=Info
|
|
m5stack_stickc.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_stickc.menu.DebugLevel.debug=Debug
|
|
m5stack_stickc.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_stickc.menu.DebugLevel.verbose=Verbose
|
|
m5stack_stickc.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_stickc.menu.EraseFlash.none=Disabled
|
|
m5stack_stickc.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_stickc.menu.EraseFlash.all=Enabled
|
|
m5stack_stickc.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
|
|
##############################################################
|
|
|
|
m5stack_stickc_plus.name=M5StickCPlus
|
|
|
|
m5stack_stickc_plus.bootloader.tool=esptool_py
|
|
m5stack_stickc_plus.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_stickc_plus.upload.tool=esptool_py
|
|
m5stack_stickc_plus.upload.tool.default=esptool_py
|
|
m5stack_stickc_plus.upload.tool.network=esp_ota
|
|
|
|
m5stack_stickc_plus.upload.maximum_size=1310720
|
|
m5stack_stickc_plus.upload.maximum_data_size=327680
|
|
m5stack_stickc_plus.upload.flags=
|
|
m5stack_stickc_plus.upload.extra_flags=
|
|
|
|
m5stack_stickc_plus.serial.disableDTR=true
|
|
m5stack_stickc_plus.serial.disableRTS=true
|
|
|
|
m5stack_stickc_plus.build.tarch=xtensa
|
|
m5stack_stickc_plus.build.bootloader_addr=0x1000
|
|
m5stack_stickc_plus.build.target=esp32
|
|
m5stack_stickc_plus.build.mcu=esp32
|
|
m5stack_stickc_plus.build.core=esp32
|
|
m5stack_stickc_plus.build.variant=m5stack_stickc_plus
|
|
m5stack_stickc_plus.build.board=M5STACK_STICKC_PLUS
|
|
|
|
m5stack_stickc_plus.build.f_cpu=240000000L
|
|
m5stack_stickc_plus.build.flash_size=4MB
|
|
m5stack_stickc_plus.build.flash_freq=80m
|
|
m5stack_stickc_plus.build.flash_mode=dio
|
|
m5stack_stickc_plus.build.boot=dio
|
|
m5stack_stickc_plus.build.partitions=huge_app
|
|
m5stack_stickc_plus.build.defines=
|
|
m5stack_stickc_plus.build.loop_core=
|
|
m5stack_stickc_plus.build.event_core=
|
|
|
|
m5stack_stickc_plus.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_stickc_plus.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_stickc_plus.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_stickc_plus.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_stickc_plus.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_stickc_plus.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_stickc_plus.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_stickc_plus.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_stickc_plus.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_stickc_plus.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_stickc_plus.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_stickc_plus.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_stickc_plus.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_stickc_plus.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_stickc_plus.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_stickc_plus.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_stickc_plus.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_stickc_plus.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_stickc_plus.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_stickc_plus.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_stickc_plus.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_stickc_plus.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_stickc_plus.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_stickc_plus.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_stickc_plus.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_stickc_plus.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_stickc_plus.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_stickc_plus.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_stickc_plus.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_stickc_plus.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_stickc_plus.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_stickc_plus.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_stickc_plus.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_stickc_plus.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_stickc_plus.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_stickc_plus.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_stickc_plus.menu.PartitionScheme.custom=Custom
|
|
m5stack_stickc_plus.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_stickc_plus.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_stickc_plus.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
m5stack_stickc_plus.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_stickc_plus.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
m5stack_stickc_plus.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_stickc_plus.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
m5stack_stickc_plus.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_stickc_plus.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
m5stack_stickc_plus.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_stickc_plus.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
m5stack_stickc_plus.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
m5stack_stickc_plus.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
m5stack_stickc_plus.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_stickc_plus.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
m5stack_stickc_plus.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
m5stack_stickc_plus.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
m5stack_stickc_plus.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_stickc_plus.menu.FlashMode.qio=QIO
|
|
m5stack_stickc_plus.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_stickc_plus.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_stickc_plus.menu.FlashMode.dio=DIO
|
|
m5stack_stickc_plus.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_stickc_plus.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_stickc_plus.menu.FlashMode.qout=QOUT
|
|
m5stack_stickc_plus.menu.FlashMode.qout.build.flash_mode=dout
|
|
m5stack_stickc_plus.menu.FlashMode.qout.build.boot=qout
|
|
m5stack_stickc_plus.menu.FlashMode.dout=DOUT
|
|
m5stack_stickc_plus.menu.FlashMode.dout.build.flash_mode=dout
|
|
m5stack_stickc_plus.menu.FlashMode.dout.build.boot=dout
|
|
|
|
m5stack_stickc_plus.menu.FlashFreq.80=80MHz
|
|
m5stack_stickc_plus.menu.FlashFreq.80.build.flash_freq=80m
|
|
m5stack_stickc_plus.menu.FlashFreq.40=40MHz
|
|
m5stack_stickc_plus.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
m5stack_stickc_plus.menu.FlashSize.4M=4MB (32Mb)
|
|
m5stack_stickc_plus.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
m5stack_stickc_plus.menu.UploadSpeed.1500000=1500000
|
|
m5stack_stickc_plus.menu.UploadSpeed.1500000.upload.speed=1500000
|
|
m5stack_stickc_plus.menu.UploadSpeed.750000=750000
|
|
m5stack_stickc_plus.menu.UploadSpeed.750000.upload.speed=750000
|
|
m5stack_stickc_plus.menu.UploadSpeed.500000=500000
|
|
m5stack_stickc_plus.menu.UploadSpeed.500000.upload.speed=500000
|
|
m5stack_stickc_plus.menu.UploadSpeed.250000=250000
|
|
m5stack_stickc_plus.menu.UploadSpeed.250000.upload.speed=250000
|
|
m5stack_stickc_plus.menu.UploadSpeed.115200=115200
|
|
m5stack_stickc_plus.menu.UploadSpeed.115200.upload.speed=115200
|
|
|
|
m5stack_stickc_plus.menu.LoopCore.1=Core 1
|
|
m5stack_stickc_plus.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_stickc_plus.menu.LoopCore.0=Core 0
|
|
m5stack_stickc_plus.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_stickc_plus.menu.EventsCore.1=Core 1
|
|
m5stack_stickc_plus.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_stickc_plus.menu.EventsCore.0=Core 0
|
|
m5stack_stickc_plus.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_stickc_plus.menu.DebugLevel.none=None
|
|
m5stack_stickc_plus.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_stickc_plus.menu.DebugLevel.error=Error
|
|
m5stack_stickc_plus.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_stickc_plus.menu.DebugLevel.warn=Warn
|
|
m5stack_stickc_plus.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_stickc_plus.menu.DebugLevel.info=Info
|
|
m5stack_stickc_plus.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_stickc_plus.menu.DebugLevel.debug=Debug
|
|
m5stack_stickc_plus.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_stickc_plus.menu.DebugLevel.verbose=Verbose
|
|
m5stack_stickc_plus.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_stickc_plus.menu.EraseFlash.none=Disabled
|
|
m5stack_stickc_plus.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_stickc_plus.menu.EraseFlash.all=Enabled
|
|
m5stack_stickc_plus.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_stickc_plus2.name=M5StickCPlus2
|
|
|
|
m5stack_stickc_plus2.bootloader.tool=esptool_py
|
|
m5stack_stickc_plus2.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_stickc_plus2.upload.tool=esptool_py
|
|
m5stack_stickc_plus2.upload.tool.default=esptool_py
|
|
m5stack_stickc_plus2.upload.tool.network=esp_ota
|
|
|
|
m5stack_stickc_plus2.upload.maximum_size=3342336
|
|
m5stack_stickc_plus2.upload.maximum_data_size=327680
|
|
m5stack_stickc_plus2.upload.flags=
|
|
m5stack_stickc_plus2.upload.extra_flags=
|
|
|
|
m5stack_stickc_plus2.serial.disableDTR=true
|
|
m5stack_stickc_plus2.serial.disableRTS=true
|
|
|
|
m5stack_stickc_plus2.build.tarch=xtensa
|
|
m5stack_stickc_plus2.build.bootloader_addr=0x1000
|
|
m5stack_stickc_plus2.build.target=esp32
|
|
m5stack_stickc_plus2.build.mcu=esp32
|
|
m5stack_stickc_plus2.build.core=esp32
|
|
m5stack_stickc_plus2.build.variant=m5stack_stickc_plus2
|
|
m5stack_stickc_plus2.build.board=M5STACK_STICKC_PLUS2
|
|
|
|
m5stack_stickc_plus2.build.f_cpu=240000000L
|
|
m5stack_stickc_plus2.build.flash_size=8MB
|
|
m5stack_stickc_plus2.build.flash_freq=80m
|
|
m5stack_stickc_plus2.build.flash_mode=dio
|
|
m5stack_stickc_plus2.build.boot=dio
|
|
m5stack_stickc_plus2.build.partitions=default_8MB
|
|
m5stack_stickc_plus2.build.defines=
|
|
m5stack_stickc_plus2.build.loop_core=
|
|
m5stack_stickc_plus2.build.event_core=
|
|
|
|
m5stack_stickc_plus2.menu.PSRAM.enabled=Enabled
|
|
m5stack_stickc_plus2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
m5stack_stickc_plus2.menu.PSRAM.enabled.build.extra_libs=
|
|
m5stack_stickc_plus2.menu.PSRAM.disabled=Disabled
|
|
m5stack_stickc_plus2.menu.PSRAM.disabled.build.defines=
|
|
m5stack_stickc_plus2.menu.PSRAM.disabled.build.extra_libs=
|
|
|
|
m5stack_stickc_plus2.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_stickc_plus2.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_stickc_plus2.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_stickc_plus2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_stickc_plus2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_stickc_plus2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_stickc_plus2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_stickc_plus2.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_stickc_plus2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_stickc_plus2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_stickc_plus2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_stickc_plus2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_stickc_plus2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_stickc_plus2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_stickc_plus2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_stickc_plus2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_stickc_plus2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_stickc_plus2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_stickc_plus2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_stickc_plus2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_stickc_plus2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_stickc_plus2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_stickc_plus2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_stickc_plus2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_stickc_plus2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_stickc_plus2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_stickc_plus2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_stickc_plus2.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_stickc_plus2.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_stickc_plus2.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_stickc_plus2.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_stickc_plus2.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_stickc_plus2.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_stickc_plus2.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_stickc_plus2.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_stickc_plus2.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_stickc_plus2.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
m5stack_stickc_plus2.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
m5stack_stickc_plus2.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
m5stack_stickc_plus2.menu.PartitionScheme.custom=Custom
|
|
m5stack_stickc_plus2.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_stickc_plus2.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_stickc_plus2.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
m5stack_stickc_plus2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_stickc_plus2.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
m5stack_stickc_plus2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_stickc_plus2.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
m5stack_stickc_plus2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_stickc_plus2.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
m5stack_stickc_plus2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_stickc_plus2.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
m5stack_stickc_plus2.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
m5stack_stickc_plus2.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
m5stack_stickc_plus2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_stickc_plus2.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
m5stack_stickc_plus2.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
m5stack_stickc_plus2.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
m5stack_stickc_plus2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_stickc_plus2.menu.FlashMode.qio=QIO
|
|
m5stack_stickc_plus2.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_stickc_plus2.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_stickc_plus2.menu.FlashMode.dio=DIO
|
|
m5stack_stickc_plus2.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_stickc_plus2.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_stickc_plus2.menu.FlashMode.qout=QOUT
|
|
m5stack_stickc_plus2.menu.FlashMode.qout.build.flash_mode=dout
|
|
m5stack_stickc_plus2.menu.FlashMode.qout.build.boot=qout
|
|
m5stack_stickc_plus2.menu.FlashMode.dout=DOUT
|
|
m5stack_stickc_plus2.menu.FlashMode.dout.build.flash_mode=dout
|
|
m5stack_stickc_plus2.menu.FlashMode.dout.build.boot=dout
|
|
|
|
m5stack_stickc_plus2.menu.FlashFreq.80=80MHz
|
|
m5stack_stickc_plus2.menu.FlashFreq.80.build.flash_freq=80m
|
|
m5stack_stickc_plus2.menu.FlashFreq.40=40MHz
|
|
m5stack_stickc_plus2.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
m5stack_stickc_plus2.menu.FlashSize.8M=8MB (64Mb)
|
|
m5stack_stickc_plus2.menu.FlashSize.8M.build.flash_size=8MB
|
|
|
|
m5stack_stickc_plus2.menu.UploadSpeed.1500000=1500000
|
|
m5stack_stickc_plus2.menu.UploadSpeed.1500000.upload.speed=1500000
|
|
m5stack_stickc_plus2.menu.UploadSpeed.750000=750000
|
|
m5stack_stickc_plus2.menu.UploadSpeed.750000.upload.speed=750000
|
|
m5stack_stickc_plus2.menu.UploadSpeed.500000=500000
|
|
m5stack_stickc_plus2.menu.UploadSpeed.500000.upload.speed=500000
|
|
m5stack_stickc_plus2.menu.UploadSpeed.250000=250000
|
|
m5stack_stickc_plus2.menu.UploadSpeed.250000.upload.speed=250000
|
|
m5stack_stickc_plus2.menu.UploadSpeed.115200=115200
|
|
m5stack_stickc_plus2.menu.UploadSpeed.115200.upload.speed=115200
|
|
|
|
m5stack_stickc_plus2.menu.LoopCore.1=Core 1
|
|
m5stack_stickc_plus2.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_stickc_plus2.menu.LoopCore.0=Core 0
|
|
m5stack_stickc_plus2.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_stickc_plus2.menu.EventsCore.1=Core 1
|
|
m5stack_stickc_plus2.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_stickc_plus2.menu.EventsCore.0=Core 0
|
|
m5stack_stickc_plus2.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_stickc_plus2.menu.DebugLevel.none=None
|
|
m5stack_stickc_plus2.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_stickc_plus2.menu.DebugLevel.error=Error
|
|
m5stack_stickc_plus2.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_stickc_plus2.menu.DebugLevel.warn=Warn
|
|
m5stack_stickc_plus2.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_stickc_plus2.menu.DebugLevel.info=Info
|
|
m5stack_stickc_plus2.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_stickc_plus2.menu.DebugLevel.debug=Debug
|
|
m5stack_stickc_plus2.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_stickc_plus2.menu.DebugLevel.verbose=Verbose
|
|
m5stack_stickc_plus2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_stickc_plus2.menu.EraseFlash.none=Disabled
|
|
m5stack_stickc_plus2.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_stickc_plus2.menu.EraseFlash.all=Enabled
|
|
m5stack_stickc_plus2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_atom.name=M5Atom
|
|
|
|
m5stack_atom.bootloader.tool=esptool_py
|
|
m5stack_atom.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_atom.upload.tool=esptool_py
|
|
m5stack_atom.upload.tool.default=esptool_py
|
|
m5stack_atom.upload.tool.network=esp_ota
|
|
|
|
m5stack_atom.upload.maximum_size=1310720
|
|
m5stack_atom.upload.maximum_data_size=327680
|
|
m5stack_atom.upload.flags=
|
|
m5stack_atom.upload.extra_flags=
|
|
|
|
m5stack_atom.serial.disableDTR=true
|
|
m5stack_atom.serial.disableRTS=true
|
|
|
|
m5stack_atom.build.tarch=xtensa
|
|
m5stack_atom.build.bootloader_addr=0x1000
|
|
m5stack_atom.build.target=esp32
|
|
m5stack_atom.build.mcu=esp32
|
|
m5stack_atom.build.core=esp32
|
|
m5stack_atom.build.variant=m5stack_atom
|
|
m5stack_atom.build.board=M5STACK_ATOM
|
|
|
|
m5stack_atom.build.f_cpu=240000000L
|
|
m5stack_atom.build.flash_size=4MB
|
|
m5stack_atom.build.flash_freq=80m
|
|
m5stack_atom.build.flash_mode=dio
|
|
m5stack_atom.build.boot=dio
|
|
m5stack_atom.build.partitions=huge_app
|
|
m5stack_atom.build.defines=
|
|
m5stack_atom.build.loop_core=
|
|
m5stack_atom.build.event_core=
|
|
|
|
m5stack_atom.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_atom.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_atom.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_atom.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_atom.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_atom.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_atom.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_atom.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_atom.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_atom.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_atom.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_atom.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_atom.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_atom.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_atom.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_atom.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_atom.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_atom.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_atom.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_atom.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_atom.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_atom.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_atom.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_atom.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_atom.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_atom.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_atom.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_atom.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_atom.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_atom.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_atom.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_atom.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_atom.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_atom.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_atom.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_atom.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_atom.menu.PartitionScheme.custom=Custom
|
|
m5stack_atom.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_atom.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_atom.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
m5stack_atom.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_atom.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
m5stack_atom.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_atom.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
m5stack_atom.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_atom.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
m5stack_atom.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_atom.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
m5stack_atom.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
m5stack_atom.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
m5stack_atom.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_atom.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
m5stack_atom.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
m5stack_atom.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
m5stack_atom.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_atom.menu.FlashMode.qio=QIO
|
|
m5stack_atom.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_atom.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_atom.menu.FlashMode.dio=DIO
|
|
m5stack_atom.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_atom.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_atom.menu.FlashMode.qout=QOUT
|
|
m5stack_atom.menu.FlashMode.qout.build.flash_mode=dout
|
|
m5stack_atom.menu.FlashMode.qout.build.boot=qout
|
|
m5stack_atom.menu.FlashMode.dout=DOUT
|
|
m5stack_atom.menu.FlashMode.dout.build.flash_mode=dout
|
|
m5stack_atom.menu.FlashMode.dout.build.boot=dout
|
|
|
|
m5stack_atom.menu.FlashFreq.80=80MHz
|
|
m5stack_atom.menu.FlashFreq.80.build.flash_freq=80m
|
|
m5stack_atom.menu.FlashFreq.40=40MHz
|
|
m5stack_atom.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
m5stack_atom.menu.FlashSize.4M=4MB (32Mb)
|
|
m5stack_atom.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
m5stack_atom.menu.UploadSpeed.1500000=1500000
|
|
m5stack_atom.menu.UploadSpeed.1500000.upload.speed=1500000
|
|
m5stack_atom.menu.UploadSpeed.750000=750000
|
|
m5stack_atom.menu.UploadSpeed.750000.upload.speed=750000
|
|
m5stack_atom.menu.UploadSpeed.500000=500000
|
|
m5stack_atom.menu.UploadSpeed.500000.upload.speed=500000
|
|
m5stack_atom.menu.UploadSpeed.250000=250000
|
|
m5stack_atom.menu.UploadSpeed.250000.upload.speed=250000
|
|
m5stack_atom.menu.UploadSpeed.115200=115200
|
|
m5stack_atom.menu.UploadSpeed.115200.upload.speed=115200
|
|
|
|
m5stack_atom.menu.LoopCore.1=Core 1
|
|
m5stack_atom.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_atom.menu.LoopCore.0=Core 0
|
|
m5stack_atom.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_atom.menu.EventsCore.1=Core 1
|
|
m5stack_atom.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_atom.menu.EventsCore.0=Core 0
|
|
m5stack_atom.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_atom.menu.DebugLevel.none=None
|
|
m5stack_atom.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_atom.menu.DebugLevel.error=Error
|
|
m5stack_atom.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_atom.menu.DebugLevel.warn=Warn
|
|
m5stack_atom.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_atom.menu.DebugLevel.info=Info
|
|
m5stack_atom.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_atom.menu.DebugLevel.debug=Debug
|
|
m5stack_atom.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_atom.menu.DebugLevel.verbose=Verbose
|
|
m5stack_atom.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_atom.menu.EraseFlash.none=Disabled
|
|
m5stack_atom.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_atom.menu.EraseFlash.all=Enabled
|
|
m5stack_atom.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_atoms3.name=M5AtomS3
|
|
m5stack_atoms3.bootloader.tool=esptool_py
|
|
m5stack_atoms3.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_atoms3.upload.tool=esptool_py
|
|
m5stack_atoms3.upload.tool.default=esptool_py
|
|
m5stack_atoms3.upload.tool.network=esp_ota
|
|
|
|
m5stack_atoms3.upload.maximum_size=1310720
|
|
m5stack_atoms3.upload.maximum_data_size=327680
|
|
m5stack_atoms3.upload.flags=
|
|
m5stack_atoms3.upload.extra_flags=
|
|
m5stack_atoms3.upload.use_1200bps_touch=false
|
|
m5stack_atoms3.upload.wait_for_upload_port=false
|
|
|
|
m5stack_atoms3.serial.disableDTR=false
|
|
m5stack_atoms3.serial.disableRTS=false
|
|
|
|
m5stack_atoms3.build.tarch=xtensa
|
|
m5stack_atoms3.build.bootloader_addr=0x0
|
|
m5stack_atoms3.build.target=esp32s3
|
|
m5stack_atoms3.build.mcu=esp32s3
|
|
m5stack_atoms3.build.core=esp32
|
|
m5stack_atoms3.build.variant=m5stack_atoms3
|
|
m5stack_atoms3.build.board=M5STACK_ATOMS3
|
|
|
|
m5stack_atoms3.build.usb_mode=1
|
|
m5stack_atoms3.build.cdc_on_boot=1
|
|
m5stack_atoms3.build.msc_on_boot=0
|
|
m5stack_atoms3.build.dfu_on_boot=0
|
|
m5stack_atoms3.build.f_cpu=240000000L
|
|
m5stack_atoms3.build.flash_size=8MB
|
|
m5stack_atoms3.build.flash_freq=80m
|
|
m5stack_atoms3.build.flash_mode=dio
|
|
m5stack_atoms3.build.boot=qio
|
|
m5stack_atoms3.build.boot_freq=80m
|
|
m5stack_atoms3.build.partitions=default
|
|
m5stack_atoms3.build.defines=
|
|
m5stack_atoms3.build.loop_core=
|
|
m5stack_atoms3.build.event_core=
|
|
m5stack_atoms3.build.psram_type=qspi
|
|
m5stack_atoms3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
m5stack_atoms3.menu.JTAGAdapter.default=Disabled
|
|
m5stack_atoms3.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
m5stack_atoms3.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
m5stack_atoms3.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
m5stack_atoms3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
m5stack_atoms3.menu.JTAGAdapter.external=FTDI Adapter
|
|
m5stack_atoms3.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
m5stack_atoms3.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
m5stack_atoms3.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
m5stack_atoms3.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
m5stack_atoms3.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
m5stack_atoms3.menu.PSRAM.disabled=Disabled
|
|
m5stack_atoms3.menu.PSRAM.disabled.build.defines=
|
|
m5stack_atoms3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
m5stack_atoms3.menu.PSRAM.enabled=QSPI PSRAM
|
|
m5stack_atoms3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
m5stack_atoms3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
m5stack_atoms3.menu.PSRAM.opi=OPI PSRAM
|
|
m5stack_atoms3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
m5stack_atoms3.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
m5stack_atoms3.menu.FlashMode.qio=QIO 80MHz
|
|
m5stack_atoms3.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_atoms3.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_atoms3.menu.FlashMode.qio.build.boot_freq=80m
|
|
m5stack_atoms3.menu.FlashMode.qio.build.flash_freq=80m
|
|
m5stack_atoms3.menu.FlashMode.qio120=QIO 120MHz
|
|
m5stack_atoms3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
m5stack_atoms3.menu.FlashMode.qio120.build.boot=qio
|
|
m5stack_atoms3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
m5stack_atoms3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
m5stack_atoms3.menu.FlashMode.dio=DIO 80MHz
|
|
m5stack_atoms3.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_atoms3.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_atoms3.menu.FlashMode.dio.build.boot_freq=80m
|
|
m5stack_atoms3.menu.FlashMode.dio.build.flash_freq=80m
|
|
m5stack_atoms3.menu.FlashMode.opi=OPI 80MHz
|
|
m5stack_atoms3.menu.FlashMode.opi.build.flash_mode=dout
|
|
m5stack_atoms3.menu.FlashMode.opi.build.boot=opi
|
|
m5stack_atoms3.menu.FlashMode.opi.build.boot_freq=80m
|
|
m5stack_atoms3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
|
|
m5stack_atoms3.menu.FlashSize.8M=8MB (64Mb)
|
|
m5stack_atoms3.menu.FlashSize.8M.build.flash_size=8MB
|
|
m5stack_atoms3.menu.FlashSize.8M.build.partitions=default_8MB
|
|
|
|
m5stack_atoms3.menu.LoopCore.1=Core 1
|
|
m5stack_atoms3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_atoms3.menu.LoopCore.0=Core 0
|
|
m5stack_atoms3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_atoms3.menu.EventsCore.1=Core 1
|
|
m5stack_atoms3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_atoms3.menu.EventsCore.0=Core 0
|
|
m5stack_atoms3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_atoms3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
m5stack_atoms3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
m5stack_atoms3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
m5stack_atoms3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
m5stack_atoms3.menu.CDCOnBoot.cdc=Enabled
|
|
m5stack_atoms3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
m5stack_atoms3.menu.CDCOnBoot.default=Disabled
|
|
m5stack_atoms3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
m5stack_atoms3.menu.MSCOnBoot.default=Disabled
|
|
m5stack_atoms3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
m5stack_atoms3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
m5stack_atoms3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
m5stack_atoms3.menu.DFUOnBoot.default=Disabled
|
|
m5stack_atoms3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
m5stack_atoms3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
m5stack_atoms3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
m5stack_atoms3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
m5stack_atoms3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
m5stack_atoms3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
m5stack_atoms3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
m5stack_atoms3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
m5stack_atoms3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
m5stack_atoms3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_atoms3.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_atoms3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_atoms3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_atoms3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_atoms3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_atoms3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_atoms3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_atoms3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_atoms3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_atoms3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_atoms3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_atoms3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_atoms3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_atoms3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_atoms3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_atoms3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_atoms3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_atoms3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_atoms3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_atoms3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_atoms3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_atoms3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_atoms3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_atoms3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_atoms3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_atoms3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_atoms3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_atoms3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_atoms3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_atoms3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
m5stack_atoms3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
m5stack_atoms3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
m5stack_atoms3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_atoms3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_atoms3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_atoms3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_atoms3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_atoms3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_atoms3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
m5stack_atoms3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
m5stack_atoms3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
m5stack_atoms3.menu.PartitionScheme.app5M_fat24M_32MB=32M Flash (4.8MB APP/22MB FATFS)
|
|
m5stack_atoms3.menu.PartitionScheme.app5M_fat24M_32MB.build.partitions=large_fat_32MB
|
|
m5stack_atoms3.menu.PartitionScheme.app5M_fat24M_32MB.upload.maximum_size=4718592
|
|
m5stack_atoms3.menu.PartitionScheme.app5M_little24M_32MB=32M Flash (4.8MB APP/22MB LittleFS)
|
|
m5stack_atoms3.menu.PartitionScheme.app5M_little24M_32MB.build.partitions=large_littlefs_32MB
|
|
m5stack_atoms3.menu.PartitionScheme.app5M_little24M_32MB.upload.maximum_size=4718592
|
|
m5stack_atoms3.menu.PartitionScheme.esp_sr_16=ESP SR 16M (3MB APP/7MB SPIFFS/2.9MB MODEL)
|
|
m5stack_atoms3.menu.PartitionScheme.esp_sr_16.upload.maximum_size=3145728
|
|
m5stack_atoms3.menu.PartitionScheme.esp_sr_16.upload.extra_flags=0xD10000 {build.path}/srmodels.bin
|
|
m5stack_atoms3.menu.PartitionScheme.esp_sr_16.build.partitions=esp_sr_16
|
|
m5stack_atoms3.menu.PartitionScheme.custom=Custom
|
|
m5stack_atoms3.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_atoms3.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_atoms3.menu.CPUFreq.240=240MHz (WiFi)
|
|
m5stack_atoms3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_atoms3.menu.CPUFreq.160=160MHz (WiFi)
|
|
m5stack_atoms3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_atoms3.menu.CPUFreq.80=80MHz (WiFi)
|
|
m5stack_atoms3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_atoms3.menu.CPUFreq.40=40MHz
|
|
m5stack_atoms3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_atoms3.menu.CPUFreq.20=20MHz
|
|
m5stack_atoms3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_atoms3.menu.CPUFreq.10=10MHz
|
|
m5stack_atoms3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_atoms3.menu.UploadSpeed.921600=921600
|
|
m5stack_atoms3.menu.UploadSpeed.921600.upload.speed=921600
|
|
m5stack_atoms3.menu.UploadSpeed.115200=115200
|
|
m5stack_atoms3.menu.UploadSpeed.115200.upload.speed=115200
|
|
m5stack_atoms3.menu.UploadSpeed.256000.windows=256000
|
|
m5stack_atoms3.menu.UploadSpeed.256000.upload.speed=256000
|
|
m5stack_atoms3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
m5stack_atoms3.menu.UploadSpeed.230400=230400
|
|
m5stack_atoms3.menu.UploadSpeed.230400.upload.speed=230400
|
|
m5stack_atoms3.menu.UploadSpeed.460800.linux=460800
|
|
m5stack_atoms3.menu.UploadSpeed.460800.macosx=460800
|
|
m5stack_atoms3.menu.UploadSpeed.460800.upload.speed=460800
|
|
m5stack_atoms3.menu.UploadSpeed.512000.windows=512000
|
|
m5stack_atoms3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
m5stack_atoms3.menu.DebugLevel.none=None
|
|
m5stack_atoms3.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_atoms3.menu.DebugLevel.error=Error
|
|
m5stack_atoms3.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_atoms3.menu.DebugLevel.warn=Warn
|
|
m5stack_atoms3.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_atoms3.menu.DebugLevel.info=Info
|
|
m5stack_atoms3.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_atoms3.menu.DebugLevel.debug=Debug
|
|
m5stack_atoms3.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_atoms3.menu.DebugLevel.verbose=Verbose
|
|
m5stack_atoms3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_atoms3.menu.EraseFlash.none=Disabled
|
|
m5stack_atoms3.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_atoms3.menu.EraseFlash.all=Enabled
|
|
m5stack_atoms3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_cores3.name=M5CoreS3
|
|
m5stack_cores3.bootloader.tool=esptool_py
|
|
m5stack_cores3.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_cores3.upload.tool=esptool_py
|
|
m5stack_cores3.upload.tool.default=esptool_py
|
|
m5stack_cores3.upload.tool.network=esp_ota
|
|
|
|
m5stack_cores3.upload.maximum_size=1310720
|
|
m5stack_cores3.upload.maximum_data_size=327680
|
|
m5stack_cores3.upload.flags=
|
|
m5stack_cores3.upload.extra_flags=
|
|
m5stack_cores3.upload.use_1200bps_touch=false
|
|
m5stack_cores3.upload.wait_for_upload_port=false
|
|
|
|
m5stack_cores3.serial.disableDTR=false
|
|
m5stack_cores3.serial.disableRTS=false
|
|
|
|
m5stack_cores3.build.tarch=xtensa
|
|
m5stack_cores3.build.bootloader_addr=0x0
|
|
m5stack_cores3.build.target=esp32s3
|
|
m5stack_cores3.build.mcu=esp32s3
|
|
m5stack_cores3.build.core=esp32
|
|
m5stack_cores3.build.variant=m5stack_cores3
|
|
m5stack_cores3.build.board=M5STACK_CORES3
|
|
|
|
m5stack_cores3.build.usb_mode=1
|
|
m5stack_cores3.build.cdc_on_boot=1
|
|
m5stack_cores3.build.msc_on_boot=0
|
|
m5stack_cores3.build.dfu_on_boot=0
|
|
m5stack_cores3.build.f_cpu=240000000L
|
|
m5stack_cores3.build.flash_size=16MB
|
|
m5stack_cores3.build.flash_freq=80m
|
|
m5stack_cores3.build.flash_mode=dio
|
|
m5stack_cores3.build.boot=qio
|
|
m5stack_cores3.build.boot_freq=80m
|
|
m5stack_cores3.build.partitions=default
|
|
m5stack_cores3.build.defines=
|
|
m5stack_cores3.build.loop_core=
|
|
m5stack_cores3.build.event_core=
|
|
m5stack_cores3.build.psram_type=qspi
|
|
m5stack_cores3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
m5stack_cores3.menu.JTAGAdapter.default=Disabled
|
|
m5stack_cores3.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
m5stack_cores3.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
m5stack_cores3.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
m5stack_cores3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
m5stack_cores3.menu.JTAGAdapter.external=FTDI Adapter
|
|
m5stack_cores3.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
m5stack_cores3.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
m5stack_cores3.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
m5stack_cores3.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
m5stack_cores3.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
m5stack_cores3.menu.PSRAM.enabled=QSPI PSRAM
|
|
m5stack_cores3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
m5stack_cores3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
m5stack_cores3.menu.PSRAM.disabled=Disabled
|
|
m5stack_cores3.menu.PSRAM.disabled.build.defines=
|
|
m5stack_cores3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
m5stack_cores3.menu.PSRAM.opi=OPI PSRAM
|
|
m5stack_cores3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
m5stack_cores3.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
m5stack_cores3.menu.FlashMode.qio=QIO 80MHz
|
|
m5stack_cores3.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_cores3.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_cores3.menu.FlashMode.qio.build.boot_freq=80m
|
|
m5stack_cores3.menu.FlashMode.qio.build.flash_freq=80m
|
|
m5stack_cores3.menu.FlashMode.qio120=QIO 120MHz
|
|
m5stack_cores3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
m5stack_cores3.menu.FlashMode.qio120.build.boot=qio
|
|
m5stack_cores3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
m5stack_cores3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
m5stack_cores3.menu.FlashMode.dio=DIO 80MHz
|
|
m5stack_cores3.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_cores3.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_cores3.menu.FlashMode.dio.build.boot_freq=80m
|
|
m5stack_cores3.menu.FlashMode.dio.build.flash_freq=80m
|
|
m5stack_cores3.menu.FlashMode.opi=OPI 80MHz
|
|
m5stack_cores3.menu.FlashMode.opi.build.flash_mode=dout
|
|
m5stack_cores3.menu.FlashMode.opi.build.boot=opi
|
|
m5stack_cores3.menu.FlashMode.opi.build.boot_freq=80m
|
|
m5stack_cores3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
m5stack_cores3.menu.FlashSize.16M=16MB (128Mb)
|
|
m5stack_cores3.menu.FlashSize.16M.build.flash_size=16MB
|
|
m5stack_cores3.menu.FlashSize.32M=32MB (256Mb)
|
|
m5stack_cores3.menu.FlashSize.32M.build.flash_size=32MB
|
|
m5stack_cores3.menu.FlashSize.32M.build.partitions=app5M_fat24M_32MB
|
|
|
|
m5stack_cores3.menu.LoopCore.1=Core 1
|
|
m5stack_cores3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_cores3.menu.LoopCore.0=Core 0
|
|
m5stack_cores3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_cores3.menu.EventsCore.1=Core 1
|
|
m5stack_cores3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_cores3.menu.EventsCore.0=Core 0
|
|
m5stack_cores3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_cores3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
m5stack_cores3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
m5stack_cores3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
m5stack_cores3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
m5stack_cores3.menu.CDCOnBoot.cdc=Enabled
|
|
m5stack_cores3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
m5stack_cores3.menu.CDCOnBoot.default=Disabled
|
|
m5stack_cores3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
m5stack_cores3.menu.MSCOnBoot.default=Disabled
|
|
m5stack_cores3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
m5stack_cores3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
m5stack_cores3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
m5stack_cores3.menu.DFUOnBoot.default=Disabled
|
|
m5stack_cores3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
m5stack_cores3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
m5stack_cores3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
m5stack_cores3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
m5stack_cores3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
m5stack_cores3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
m5stack_cores3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
m5stack_cores3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
m5stack_cores3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
m5stack_cores3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
m5stack_cores3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
m5stack_cores3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
m5stack_cores3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_cores3.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_cores3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_cores3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_cores3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_cores3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_cores3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_cores3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_cores3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_cores3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_cores3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_cores3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_cores3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_cores3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_cores3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_cores3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_cores3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_cores3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_cores3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_cores3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_cores3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_cores3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_cores3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_cores3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_cores3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_cores3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_cores3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_cores3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_cores3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_cores3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_cores3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_cores3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_cores3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_cores3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_cores3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_cores3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_cores3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
m5stack_cores3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
m5stack_cores3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
m5stack_cores3.menu.PartitionScheme.app5M_fat24M_32MB=32M Flash (4.8MB APP/22MB FATFS)
|
|
m5stack_cores3.menu.PartitionScheme.app5M_fat24M_32MB.build.partitions=large_fat_32MB
|
|
m5stack_cores3.menu.PartitionScheme.app5M_fat24M_32MB.upload.maximum_size=4718592
|
|
m5stack_cores3.menu.PartitionScheme.app5M_little24M_32MB=32M Flash (4.8MB APP/22MB LittleFS)
|
|
m5stack_cores3.menu.PartitionScheme.app5M_little24M_32MB.build.partitions=large_littlefs_32MB
|
|
m5stack_cores3.menu.PartitionScheme.app5M_little24M_32MB.upload.maximum_size=4718592
|
|
m5stack_cores3.menu.PartitionScheme.esp_sr_16=ESP SR 16M (3MB APP/7MB SPIFFS/2.9MB MODEL)
|
|
m5stack_cores3.menu.PartitionScheme.esp_sr_16.upload.maximum_size=3145728
|
|
m5stack_cores3.menu.PartitionScheme.esp_sr_16.upload.extra_flags=0xD10000 {build.path}/srmodels.bin
|
|
m5stack_cores3.menu.PartitionScheme.esp_sr_16.build.partitions=esp_sr_16
|
|
m5stack_cores3.menu.PartitionScheme.custom=Custom
|
|
m5stack_cores3.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_cores3.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_cores3.menu.PartitionScheme.factory_4apps=16MB+Factory (4x 3MB APP/2MB SPIFFS)
|
|
m5stack_cores3.menu.PartitionScheme.factory_4apps.build.custom_partitions=m5stack_partitions_16MB_factory_4_apps
|
|
m5stack_cores3.menu.PartitionScheme.factory_4apps.upload.maximum_size=3145728
|
|
m5stack_cores3.menu.PartitionScheme.factory_6apps=16MB+Factory (6x 2MB APP/2MB SPIFFS)
|
|
m5stack_cores3.menu.PartitionScheme.factory_6apps.build.custom_partitions=m5stack_partitions_16MB_factory_6_apps
|
|
m5stack_cores3.menu.PartitionScheme.factory_6apps.upload.maximum_size=2097152
|
|
|
|
m5stack_cores3.menu.CPUFreq.240=240MHz (WiFi)
|
|
m5stack_cores3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_cores3.menu.CPUFreq.160=160MHz (WiFi)
|
|
m5stack_cores3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_cores3.menu.CPUFreq.80=80MHz (WiFi)
|
|
m5stack_cores3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_cores3.menu.CPUFreq.40=40MHz
|
|
m5stack_cores3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_cores3.menu.CPUFreq.20=20MHz
|
|
m5stack_cores3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_cores3.menu.CPUFreq.10=10MHz
|
|
m5stack_cores3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_cores3.menu.UploadSpeed.921600=921600
|
|
m5stack_cores3.menu.UploadSpeed.921600.upload.speed=921600
|
|
m5stack_cores3.menu.UploadSpeed.115200=115200
|
|
m5stack_cores3.menu.UploadSpeed.115200.upload.speed=115200
|
|
m5stack_cores3.menu.UploadSpeed.256000.windows=256000
|
|
m5stack_cores3.menu.UploadSpeed.256000.upload.speed=256000
|
|
m5stack_cores3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
m5stack_cores3.menu.UploadSpeed.230400=230400
|
|
m5stack_cores3.menu.UploadSpeed.230400.upload.speed=230400
|
|
m5stack_cores3.menu.UploadSpeed.460800.linux=460800
|
|
m5stack_cores3.menu.UploadSpeed.460800.macosx=460800
|
|
m5stack_cores3.menu.UploadSpeed.460800.upload.speed=460800
|
|
m5stack_cores3.menu.UploadSpeed.512000.windows=512000
|
|
m5stack_cores3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
m5stack_cores3.menu.DebugLevel.none=None
|
|
m5stack_cores3.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_cores3.menu.DebugLevel.error=Error
|
|
m5stack_cores3.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_cores3.menu.DebugLevel.warn=Warn
|
|
m5stack_cores3.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_cores3.menu.DebugLevel.info=Info
|
|
m5stack_cores3.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_cores3.menu.DebugLevel.debug=Debug
|
|
m5stack_cores3.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_cores3.menu.DebugLevel.verbose=Verbose
|
|
m5stack_cores3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_cores3.menu.EraseFlash.none=Disabled
|
|
m5stack_cores3.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_cores3.menu.EraseFlash.all=Enabled
|
|
m5stack_cores3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_timer_cam.name=M5TimerCAM
|
|
|
|
m5stack_timer_cam.bootloader.tool=esptool_py
|
|
m5stack_timer_cam.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_timer_cam.upload.tool=esptool_py
|
|
m5stack_timer_cam.upload.tool.default=esptool_py
|
|
m5stack_timer_cam.upload.tool.network=esp_ota
|
|
|
|
m5stack_timer_cam.upload.maximum_size=1310720
|
|
m5stack_timer_cam.upload.maximum_data_size=327680
|
|
|
|
m5stack_timer_cam.upload.flags=
|
|
m5stack_timer_cam.upload.extra_flags=
|
|
|
|
m5stack_timer_cam.serial.disableDTR=true
|
|
m5stack_timer_cam.serial.disableRTS=true
|
|
|
|
m5stack_timer_cam.build.tarch=xtensa
|
|
m5stack_timer_cam.build.bootloader_addr=0x1000
|
|
m5stack_timer_cam.build.target=esp32
|
|
m5stack_timer_cam.build.mcu=esp32
|
|
m5stack_timer_cam.build.core=esp32
|
|
m5stack_timer_cam.build.variant=m5stack_timer_cam
|
|
m5stack_timer_cam.build.board=M5STACK_TIMER_CAM
|
|
|
|
m5stack_timer_cam.build.f_cpu=240000000L
|
|
m5stack_timer_cam.build.flash_size=4MB
|
|
m5stack_timer_cam.build.flash_freq=80m
|
|
m5stack_timer_cam.build.flash_mode=dio
|
|
m5stack_timer_cam.build.boot=dio
|
|
m5stack_timer_cam.build.partitions=default
|
|
m5stack_timer_cam.build.defines=
|
|
m5stack_timer_cam.build.loop_core=
|
|
m5stack_timer_cam.build.event_core=
|
|
|
|
m5stack_timer_cam.menu.PSRAM.enabled=Enabled
|
|
m5stack_timer_cam.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
m5stack_timer_cam.menu.PSRAM.enabled.build.extra_libs=
|
|
m5stack_timer_cam.menu.PSRAM.disabled=Disabled
|
|
m5stack_timer_cam.menu.PSRAM.disabled.build.defines=
|
|
m5stack_timer_cam.menu.PSRAM.disabled.build.extra_libs=
|
|
|
|
m5stack_timer_cam.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_timer_cam.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_timer_cam.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_timer_cam.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_timer_cam.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_timer_cam.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_timer_cam.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_timer_cam.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_timer_cam.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_timer_cam.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_timer_cam.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_timer_cam.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_timer_cam.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_timer_cam.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_timer_cam.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_timer_cam.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_timer_cam.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_timer_cam.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_timer_cam.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_timer_cam.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_timer_cam.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_timer_cam.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_timer_cam.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_timer_cam.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_timer_cam.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_timer_cam.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_timer_cam.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
m5stack_timer_cam.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
m5stack_timer_cam.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_timer_cam.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
m5stack_timer_cam.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_timer_cam.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
m5stack_timer_cam.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_timer_cam.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
m5stack_timer_cam.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_timer_cam.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
m5stack_timer_cam.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
m5stack_timer_cam.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
m5stack_timer_cam.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_timer_cam.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
m5stack_timer_cam.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
m5stack_timer_cam.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
m5stack_timer_cam.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_timer_cam.menu.FlashMode.qio=QIO
|
|
m5stack_timer_cam.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_timer_cam.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_timer_cam.menu.FlashMode.dio=DIO
|
|
m5stack_timer_cam.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_timer_cam.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_timer_cam.menu.FlashMode.qout=QOUT
|
|
m5stack_timer_cam.menu.FlashMode.qout.build.flash_mode=dout
|
|
m5stack_timer_cam.menu.FlashMode.qout.build.boot=qout
|
|
m5stack_timer_cam.menu.FlashMode.dout=DOUT
|
|
m5stack_timer_cam.menu.FlashMode.dout.build.flash_mode=dout
|
|
m5stack_timer_cam.menu.FlashMode.dout.build.boot=dout
|
|
|
|
m5stack_timer_cam.menu.FlashFreq.80=80MHz
|
|
m5stack_timer_cam.menu.FlashFreq.80.build.flash_freq=80m
|
|
m5stack_timer_cam.menu.FlashFreq.40=40MHz
|
|
m5stack_timer_cam.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
m5stack_timer_cam.menu.FlashSize.4M=4MB (32Mb)
|
|
m5stack_timer_cam.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
m5stack_timer_cam.menu.UploadSpeed.1500000=1500000
|
|
m5stack_timer_cam.menu.UploadSpeed.1500000.upload.speed=1500000
|
|
m5stack_timer_cam.menu.UploadSpeed.750000=750000
|
|
m5stack_timer_cam.menu.UploadSpeed.750000.upload.speed=750000
|
|
m5stack_timer_cam.menu.UploadSpeed.500000=500000
|
|
m5stack_timer_cam.menu.UploadSpeed.500000.upload.speed=500000
|
|
m5stack_timer_cam.menu.UploadSpeed.250000=250000
|
|
m5stack_timer_cam.menu.UploadSpeed.250000.upload.speed=250000
|
|
m5stack_timer_cam.menu.UploadSpeed.115200=115200
|
|
m5stack_timer_cam.menu.UploadSpeed.115200.upload.speed=115200
|
|
|
|
m5stack_timer_cam.menu.LoopCore.1=Core 1
|
|
m5stack_timer_cam.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_timer_cam.menu.LoopCore.0=Core 0
|
|
m5stack_timer_cam.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_timer_cam.menu.EventsCore.1=Core 1
|
|
m5stack_timer_cam.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_timer_cam.menu.EventsCore.0=Core 0
|
|
m5stack_timer_cam.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_timer_cam.menu.DebugLevel.none=None
|
|
m5stack_timer_cam.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_timer_cam.menu.DebugLevel.error=Error
|
|
m5stack_timer_cam.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_timer_cam.menu.DebugLevel.warn=Warn
|
|
m5stack_timer_cam.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_timer_cam.menu.DebugLevel.info=Info
|
|
m5stack_timer_cam.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_timer_cam.menu.DebugLevel.debug=Debug
|
|
m5stack_timer_cam.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_timer_cam.menu.DebugLevel.verbose=Verbose
|
|
m5stack_timer_cam.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_timer_cam.menu.EraseFlash.none=Disabled
|
|
m5stack_timer_cam.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_timer_cam.menu.EraseFlash.all=Enabled
|
|
m5stack_timer_cam.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
|
|
m5stack_unit_cam.name=M5UnitCAM
|
|
|
|
m5stack_unit_cam.bootloader.tool=esptool_py
|
|
m5stack_unit_cam.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_unit_cam.upload.tool=esptool_py
|
|
m5stack_unit_cam.upload.tool.default=esptool_py
|
|
m5stack_unit_cam.upload.tool.network=esp_ota
|
|
|
|
m5stack_unit_cam.upload.maximum_size=1310720
|
|
m5stack_unit_cam.upload.maximum_data_size=327680
|
|
|
|
m5stack_unit_cam.upload.flags=
|
|
m5stack_unit_cam.upload.extra_flags=
|
|
|
|
m5stack_unit_cam.serial.disableDTR=true
|
|
m5stack_unit_cam.serial.disableRTS=true
|
|
|
|
m5stack_unit_cam.build.tarch=xtensa
|
|
m5stack_unit_cam.build.bootloader_addr=0x1000
|
|
m5stack_unit_cam.build.target=esp32
|
|
m5stack_unit_cam.build.mcu=esp32
|
|
m5stack_unit_cam.build.core=esp32
|
|
m5stack_unit_cam.build.variant=m5stack_unit_cam
|
|
m5stack_unit_cam.build.board=M5STACK_UNIT_CAM
|
|
|
|
m5stack_unit_cam.build.f_cpu=240000000L
|
|
m5stack_unit_cam.build.flash_size=4MB
|
|
m5stack_unit_cam.build.flash_freq=80m
|
|
m5stack_unit_cam.build.flash_mode=dio
|
|
m5stack_unit_cam.build.boot=dio
|
|
m5stack_unit_cam.build.partitions=default
|
|
m5stack_unit_cam.build.defines=
|
|
m5stack_unit_cam.build.loop_core=
|
|
m5stack_unit_cam.build.event_core=
|
|
|
|
m5stack_unit_cam.menu.PSRAM.enabled=Enabled
|
|
m5stack_unit_cam.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
m5stack_unit_cam.menu.PSRAM.enabled.build.extra_libs=
|
|
m5stack_unit_cam.menu.PSRAM.disabled=Disabled
|
|
m5stack_unit_cam.menu.PSRAM.disabled.build.defines=
|
|
m5stack_unit_cam.menu.PSRAM.disabled.build.extra_libs=
|
|
|
|
m5stack_unit_cam.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_unit_cam.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_unit_cam.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_unit_cam.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_unit_cam.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_unit_cam.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_unit_cam.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_unit_cam.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_unit_cam.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_unit_cam.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_unit_cam.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_unit_cam.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_unit_cam.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_unit_cam.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_unit_cam.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_unit_cam.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_unit_cam.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_unit_cam.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_unit_cam.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_unit_cam.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_unit_cam.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_unit_cam.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_unit_cam.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_unit_cam.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_unit_cam.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_unit_cam.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_unit_cam.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
m5stack_unit_cam.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
m5stack_unit_cam.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_unit_cam.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
m5stack_unit_cam.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_unit_cam.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
m5stack_unit_cam.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_unit_cam.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
m5stack_unit_cam.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_unit_cam.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
m5stack_unit_cam.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
m5stack_unit_cam.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
m5stack_unit_cam.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_unit_cam.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
m5stack_unit_cam.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
m5stack_unit_cam.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
m5stack_unit_cam.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_unit_cam.menu.FlashMode.qio=QIO
|
|
m5stack_unit_cam.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_unit_cam.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_unit_cam.menu.FlashMode.dio=DIO
|
|
m5stack_unit_cam.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_unit_cam.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_unit_cam.menu.FlashMode.qout=QOUT
|
|
m5stack_unit_cam.menu.FlashMode.qout.build.flash_mode=dout
|
|
m5stack_unit_cam.menu.FlashMode.qout.build.boot=qout
|
|
m5stack_unit_cam.menu.FlashMode.dout=DOUT
|
|
m5stack_unit_cam.menu.FlashMode.dout.build.flash_mode=dout
|
|
m5stack_unit_cam.menu.FlashMode.dout.build.boot=dout
|
|
|
|
m5stack_unit_cam.menu.FlashFreq.80=80MHz
|
|
m5stack_unit_cam.menu.FlashFreq.80.build.flash_freq=80m
|
|
m5stack_unit_cam.menu.FlashFreq.40=40MHz
|
|
m5stack_unit_cam.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
m5stack_unit_cam.menu.FlashSize.4M=4MB (32Mb)
|
|
m5stack_unit_cam.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
m5stack_unit_cam.menu.UploadSpeed.1500000=1500000
|
|
m5stack_unit_cam.menu.UploadSpeed.1500000.upload.speed=1500000
|
|
m5stack_unit_cam.menu.UploadSpeed.750000=750000
|
|
m5stack_unit_cam.menu.UploadSpeed.750000.upload.speed=750000
|
|
m5stack_unit_cam.menu.UploadSpeed.500000=500000
|
|
m5stack_unit_cam.menu.UploadSpeed.500000.upload.speed=500000
|
|
m5stack_unit_cam.menu.UploadSpeed.250000=250000
|
|
m5stack_unit_cam.menu.UploadSpeed.250000.upload.speed=250000
|
|
m5stack_unit_cam.menu.UploadSpeed.115200=115200
|
|
m5stack_unit_cam.menu.UploadSpeed.115200.upload.speed=115200
|
|
|
|
m5stack_unit_cam.menu.LoopCore.1=Core 1
|
|
m5stack_unit_cam.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_unit_cam.menu.LoopCore.0=Core 0
|
|
m5stack_unit_cam.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_unit_cam.menu.EventsCore.1=Core 1
|
|
m5stack_unit_cam.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_unit_cam.menu.EventsCore.0=Core 0
|
|
m5stack_unit_cam.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_unit_cam.menu.DebugLevel.none=None
|
|
m5stack_unit_cam.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_unit_cam.menu.DebugLevel.error=Error
|
|
m5stack_unit_cam.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_unit_cam.menu.DebugLevel.warn=Warn
|
|
m5stack_unit_cam.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_unit_cam.menu.DebugLevel.info=Info
|
|
m5stack_unit_cam.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_unit_cam.menu.DebugLevel.debug=Debug
|
|
m5stack_unit_cam.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_unit_cam.menu.DebugLevel.verbose=Verbose
|
|
m5stack_unit_cam.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_unit_cam.menu.EraseFlash.none=Disabled
|
|
m5stack_unit_cam.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_unit_cam.menu.EraseFlash.all=Enabled
|
|
m5stack_unit_cam.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
|
|
m5stack_unit_cams3.name=M5UnitCAMS3
|
|
m5stack_unit_cams3.bootloader.tool=esptool_py
|
|
m5stack_unit_cams3.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_unit_cams3.upload.tool=esptool_py
|
|
m5stack_unit_cams3.upload.tool.default=esptool_py
|
|
m5stack_unit_cams3.upload.tool.network=esp_ota
|
|
|
|
m5stack_unit_cams3.upload.maximum_size=1310720
|
|
m5stack_unit_cams3.upload.maximum_data_size=327680
|
|
m5stack_unit_cams3.upload.flags=
|
|
m5stack_unit_cams3.upload.extra_flags=
|
|
m5stack_unit_cams3.upload.use_1200bps_touch=false
|
|
m5stack_unit_cams3.upload.wait_for_upload_port=false
|
|
|
|
m5stack_unit_cams3.serial.disableDTR=false
|
|
m5stack_unit_cams3.serial.disableRTS=false
|
|
|
|
m5stack_unit_cams3.build.tarch=xtensa
|
|
m5stack_unit_cams3.build.bootloader_addr=0x0
|
|
m5stack_unit_cams3.build.target=esp32s3
|
|
m5stack_unit_cams3.build.mcu=esp32s3
|
|
m5stack_unit_cams3.build.core=esp32
|
|
m5stack_unit_cams3.build.variant=m5stack_unit_cams3
|
|
m5stack_unit_cams3.build.board=M5STACK_UNIT_CAMS3
|
|
|
|
m5stack_unit_cams3.build.usb_mode=1
|
|
m5stack_unit_cams3.build.cdc_on_boot=1
|
|
m5stack_unit_cams3.build.msc_on_boot=0
|
|
m5stack_unit_cams3.build.dfu_on_boot=0
|
|
m5stack_unit_cams3.build.f_cpu=240000000L
|
|
m5stack_unit_cams3.build.flash_size=16MB
|
|
m5stack_unit_cams3.build.flash_freq=80m
|
|
m5stack_unit_cams3.build.flash_mode=dio
|
|
m5stack_unit_cams3.build.boot=qio
|
|
m5stack_unit_cams3.build.boot_freq=80m
|
|
m5stack_unit_cams3.build.partitions=default
|
|
m5stack_unit_cams3.build.defines=
|
|
m5stack_unit_cams3.build.loop_core=
|
|
m5stack_unit_cams3.build.event_core=
|
|
m5stack_unit_cams3.build.psram_type=qspi
|
|
m5stack_unit_cams3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
m5stack_unit_cams3.menu.JTAGAdapter.default=Disabled
|
|
m5stack_unit_cams3.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
m5stack_unit_cams3.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
m5stack_unit_cams3.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
m5stack_unit_cams3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
m5stack_unit_cams3.menu.JTAGAdapter.external=FTDI Adapter
|
|
m5stack_unit_cams3.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
m5stack_unit_cams3.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
m5stack_unit_cams3.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
m5stack_unit_cams3.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
m5stack_unit_cams3.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
m5stack_unit_cams3.menu.PSRAM.enabled=QSPI PSRAM
|
|
m5stack_unit_cams3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
m5stack_unit_cams3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
m5stack_unit_cams3.menu.PSRAM.disabled=Disabled
|
|
m5stack_unit_cams3.menu.PSRAM.disabled.build.defines=
|
|
m5stack_unit_cams3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
m5stack_unit_cams3.menu.PSRAM.opi=OPI PSRAM
|
|
m5stack_unit_cams3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
m5stack_unit_cams3.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
m5stack_unit_cams3.menu.FlashMode.qio=QIO 80MHz
|
|
m5stack_unit_cams3.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_unit_cams3.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_unit_cams3.menu.FlashMode.qio.build.boot_freq=80m
|
|
m5stack_unit_cams3.menu.FlashMode.qio.build.flash_freq=80m
|
|
m5stack_unit_cams3.menu.FlashMode.qio120=QIO 120MHz
|
|
m5stack_unit_cams3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
m5stack_unit_cams3.menu.FlashMode.qio120.build.boot=qio
|
|
m5stack_unit_cams3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
m5stack_unit_cams3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
m5stack_unit_cams3.menu.FlashMode.dio=DIO 80MHz
|
|
m5stack_unit_cams3.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_unit_cams3.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_unit_cams3.menu.FlashMode.dio.build.boot_freq=80m
|
|
m5stack_unit_cams3.menu.FlashMode.dio.build.flash_freq=80m
|
|
m5stack_unit_cams3.menu.FlashMode.opi=OPI 80MHz
|
|
m5stack_unit_cams3.menu.FlashMode.opi.build.flash_mode=dout
|
|
m5stack_unit_cams3.menu.FlashMode.opi.build.boot=opi
|
|
m5stack_unit_cams3.menu.FlashMode.opi.build.boot_freq=80m
|
|
m5stack_unit_cams3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
m5stack_unit_cams3.menu.FlashSize.16M=16MB (128Mb)
|
|
m5stack_unit_cams3.menu.FlashSize.16M.build.flash_size=16MB
|
|
m5stack_unit_cams3.menu.FlashSize.32M=32MB (256Mb)
|
|
m5stack_unit_cams3.menu.FlashSize.32M.build.flash_size=32MB
|
|
m5stack_unit_cams3.menu.FlashSize.32M.build.partitions=app5M_fat24M_32MB
|
|
|
|
m5stack_unit_cams3.menu.LoopCore.1=Core 1
|
|
m5stack_unit_cams3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_unit_cams3.menu.LoopCore.0=Core 0
|
|
m5stack_unit_cams3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_unit_cams3.menu.EventsCore.1=Core 1
|
|
m5stack_unit_cams3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_unit_cams3.menu.EventsCore.0=Core 0
|
|
m5stack_unit_cams3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_unit_cams3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
m5stack_unit_cams3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
m5stack_unit_cams3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
m5stack_unit_cams3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
m5stack_unit_cams3.menu.CDCOnBoot.cdc=Enabled
|
|
m5stack_unit_cams3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
m5stack_unit_cams3.menu.CDCOnBoot.default=Disabled
|
|
m5stack_unit_cams3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
m5stack_unit_cams3.menu.MSCOnBoot.default=Disabled
|
|
m5stack_unit_cams3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
m5stack_unit_cams3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
m5stack_unit_cams3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
m5stack_unit_cams3.menu.DFUOnBoot.default=Disabled
|
|
m5stack_unit_cams3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
m5stack_unit_cams3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
m5stack_unit_cams3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
m5stack_unit_cams3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
m5stack_unit_cams3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
m5stack_unit_cams3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
m5stack_unit_cams3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
m5stack_unit_cams3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
m5stack_unit_cams3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
m5stack_unit_cams3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
m5stack_unit_cams3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
m5stack_unit_cams3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
m5stack_unit_cams3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_unit_cams3.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_unit_cams3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_unit_cams3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_unit_cams3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_unit_cams3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_unit_cams3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_unit_cams3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_unit_cams3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_unit_cams3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_unit_cams3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_unit_cams3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_unit_cams3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_unit_cams3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_unit_cams3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_unit_cams3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_unit_cams3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_unit_cams3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_unit_cams3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_unit_cams3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_unit_cams3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_unit_cams3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_unit_cams3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_unit_cams3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_unit_cams3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_unit_cams3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_unit_cams3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_unit_cams3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_unit_cams3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_unit_cams3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_unit_cams3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_unit_cams3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_unit_cams3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_unit_cams3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_unit_cams3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_unit_cams3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_unit_cams3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
m5stack_unit_cams3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
m5stack_unit_cams3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
m5stack_unit_cams3.menu.PartitionScheme.app5M_fat24M_32MB=32M Flash (4.8MB APP/22MB FATFS)
|
|
m5stack_unit_cams3.menu.PartitionScheme.app5M_fat24M_32MB.build.partitions=large_fat_32MB
|
|
m5stack_unit_cams3.menu.PartitionScheme.app5M_fat24M_32MB.upload.maximum_size=4718592
|
|
m5stack_unit_cams3.menu.PartitionScheme.app5M_little24M_32MB=32M Flash (4.8MB APP/22MB LittleFS)
|
|
m5stack_unit_cams3.menu.PartitionScheme.app5M_little24M_32MB.build.partitions=large_littlefs_32MB
|
|
m5stack_unit_cams3.menu.PartitionScheme.app5M_little24M_32MB.upload.maximum_size=4718592
|
|
m5stack_unit_cams3.menu.PartitionScheme.esp_sr_16=ESP SR 16M (3MB APP/7MB SPIFFS/2.9MB MODEL)
|
|
m5stack_unit_cams3.menu.PartitionScheme.esp_sr_16.upload.maximum_size=3145728
|
|
m5stack_unit_cams3.menu.PartitionScheme.esp_sr_16.upload.extra_flags=0xD10000 {build.path}/srmodels.bin
|
|
m5stack_unit_cams3.menu.PartitionScheme.esp_sr_16.build.partitions=esp_sr_16
|
|
m5stack_unit_cams3.menu.PartitionScheme.custom=Custom
|
|
m5stack_unit_cams3.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_unit_cams3.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_unit_cams3.menu.CPUFreq.240=240MHz (WiFi)
|
|
m5stack_unit_cams3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_unit_cams3.menu.CPUFreq.160=160MHz (WiFi)
|
|
m5stack_unit_cams3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_unit_cams3.menu.CPUFreq.80=80MHz (WiFi)
|
|
m5stack_unit_cams3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_unit_cams3.menu.CPUFreq.40=40MHz
|
|
m5stack_unit_cams3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_unit_cams3.menu.CPUFreq.20=20MHz
|
|
m5stack_unit_cams3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_unit_cams3.menu.CPUFreq.10=10MHz
|
|
m5stack_unit_cams3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_unit_cams3.menu.UploadSpeed.921600=921600
|
|
m5stack_unit_cams3.menu.UploadSpeed.921600.upload.speed=921600
|
|
m5stack_unit_cams3.menu.UploadSpeed.115200=115200
|
|
m5stack_unit_cams3.menu.UploadSpeed.115200.upload.speed=115200
|
|
m5stack_unit_cams3.menu.UploadSpeed.256000.windows=256000
|
|
m5stack_unit_cams3.menu.UploadSpeed.256000.upload.speed=256000
|
|
m5stack_unit_cams3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
m5stack_unit_cams3.menu.UploadSpeed.230400=230400
|
|
m5stack_unit_cams3.menu.UploadSpeed.230400.upload.speed=230400
|
|
m5stack_unit_cams3.menu.UploadSpeed.460800.linux=460800
|
|
m5stack_unit_cams3.menu.UploadSpeed.460800.macosx=460800
|
|
m5stack_unit_cams3.menu.UploadSpeed.460800.upload.speed=460800
|
|
m5stack_unit_cams3.menu.UploadSpeed.512000.windows=512000
|
|
m5stack_unit_cams3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
m5stack_unit_cams3.menu.DebugLevel.none=None
|
|
m5stack_unit_cams3.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_unit_cams3.menu.DebugLevel.error=Error
|
|
m5stack_unit_cams3.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_unit_cams3.menu.DebugLevel.warn=Warn
|
|
m5stack_unit_cams3.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_unit_cams3.menu.DebugLevel.info=Info
|
|
m5stack_unit_cams3.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_unit_cams3.menu.DebugLevel.debug=Debug
|
|
m5stack_unit_cams3.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_unit_cams3.menu.DebugLevel.verbose=Verbose
|
|
m5stack_unit_cams3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_unit_cams3.menu.EraseFlash.none=Disabled
|
|
m5stack_unit_cams3.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_unit_cams3.menu.EraseFlash.all=Enabled
|
|
m5stack_unit_cams3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_poe_cam.name=M5PoECAM
|
|
|
|
m5stack_poe_cam.bootloader.tool=esptool_py
|
|
m5stack_poe_cam.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_poe_cam.upload.tool=esptool_py
|
|
m5stack_poe_cam.upload.tool.default=esptool_py
|
|
m5stack_poe_cam.upload.tool.network=esp_ota
|
|
|
|
m5stack_poe_cam.upload.maximum_size=1310720
|
|
m5stack_poe_cam.upload.maximum_data_size=327680
|
|
|
|
m5stack_poe_cam.upload.flags=
|
|
m5stack_poe_cam.upload.extra_flags=
|
|
|
|
m5stack_poe_cam.serial.disableDTR=true
|
|
m5stack_poe_cam.serial.disableRTS=true
|
|
|
|
m5stack_poe_cam.build.tarch=xtensa
|
|
m5stack_poe_cam.build.bootloader_addr=0x1000
|
|
m5stack_poe_cam.build.target=esp32
|
|
m5stack_poe_cam.build.mcu=esp32
|
|
m5stack_poe_cam.build.core=esp32
|
|
m5stack_poe_cam.build.variant=m5stack_poe_cam
|
|
m5stack_poe_cam.build.board=M5STACK_POE_CAM
|
|
|
|
m5stack_poe_cam.build.f_cpu=240000000L
|
|
m5stack_poe_cam.build.flash_size=4MB
|
|
m5stack_poe_cam.build.flash_freq=80m
|
|
m5stack_poe_cam.build.flash_mode=dio
|
|
m5stack_poe_cam.build.boot=dio
|
|
m5stack_poe_cam.build.partitions=default
|
|
m5stack_poe_cam.build.defines=
|
|
m5stack_poe_cam.build.loop_core=
|
|
m5stack_poe_cam.build.event_core=
|
|
|
|
m5stack_poe_cam.menu.PSRAM.enabled=Enabled
|
|
m5stack_poe_cam.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
m5stack_poe_cam.menu.PSRAM.enabled.build.extra_libs=
|
|
m5stack_poe_cam.menu.PSRAM.disabled=Disabled
|
|
m5stack_poe_cam.menu.PSRAM.disabled.build.defines=
|
|
m5stack_poe_cam.menu.PSRAM.disabled.build.extra_libs=
|
|
|
|
m5stack_poe_cam.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_poe_cam.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_poe_cam.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_poe_cam.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_poe_cam.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_poe_cam.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_poe_cam.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_poe_cam.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_poe_cam.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_poe_cam.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_poe_cam.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_poe_cam.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_poe_cam.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_poe_cam.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_poe_cam.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_poe_cam.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_poe_cam.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_poe_cam.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_poe_cam.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_poe_cam.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_poe_cam.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_poe_cam.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_poe_cam.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_poe_cam.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_poe_cam.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_poe_cam.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_poe_cam.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
m5stack_poe_cam.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
m5stack_poe_cam.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_poe_cam.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
m5stack_poe_cam.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_poe_cam.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
m5stack_poe_cam.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_poe_cam.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
m5stack_poe_cam.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_poe_cam.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
m5stack_poe_cam.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
m5stack_poe_cam.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
m5stack_poe_cam.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_poe_cam.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
m5stack_poe_cam.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
m5stack_poe_cam.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
m5stack_poe_cam.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_poe_cam.menu.FlashMode.qio=QIO
|
|
m5stack_poe_cam.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_poe_cam.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_poe_cam.menu.FlashMode.dio=DIO
|
|
m5stack_poe_cam.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_poe_cam.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_poe_cam.menu.FlashMode.qout=QOUT
|
|
m5stack_poe_cam.menu.FlashMode.qout.build.flash_mode=dout
|
|
m5stack_poe_cam.menu.FlashMode.qout.build.boot=qout
|
|
m5stack_poe_cam.menu.FlashMode.dout=DOUT
|
|
m5stack_poe_cam.menu.FlashMode.dout.build.flash_mode=dout
|
|
m5stack_poe_cam.menu.FlashMode.dout.build.boot=dout
|
|
|
|
m5stack_poe_cam.menu.FlashFreq.80=80MHz
|
|
m5stack_poe_cam.menu.FlashFreq.80.build.flash_freq=80m
|
|
m5stack_poe_cam.menu.FlashFreq.40=40MHz
|
|
m5stack_poe_cam.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
m5stack_poe_cam.menu.FlashSize.4M=4MB (32Mb)
|
|
m5stack_poe_cam.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
m5stack_poe_cam.menu.UploadSpeed.1500000=1500000
|
|
m5stack_poe_cam.menu.UploadSpeed.1500000.upload.speed=1500000
|
|
m5stack_poe_cam.menu.UploadSpeed.750000=750000
|
|
m5stack_poe_cam.menu.UploadSpeed.750000.upload.speed=750000
|
|
m5stack_poe_cam.menu.UploadSpeed.500000=500000
|
|
m5stack_poe_cam.menu.UploadSpeed.500000.upload.speed=500000
|
|
m5stack_poe_cam.menu.UploadSpeed.250000=250000
|
|
m5stack_poe_cam.menu.UploadSpeed.250000.upload.speed=250000
|
|
m5stack_poe_cam.menu.UploadSpeed.115200=115200
|
|
m5stack_poe_cam.menu.UploadSpeed.115200.upload.speed=115200
|
|
|
|
m5stack_poe_cam.menu.LoopCore.1=Core 1
|
|
m5stack_poe_cam.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_poe_cam.menu.LoopCore.0=Core 0
|
|
m5stack_poe_cam.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_poe_cam.menu.EventsCore.1=Core 1
|
|
m5stack_poe_cam.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_poe_cam.menu.EventsCore.0=Core 0
|
|
m5stack_poe_cam.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_poe_cam.menu.DebugLevel.none=None
|
|
m5stack_poe_cam.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_poe_cam.menu.DebugLevel.error=Error
|
|
m5stack_poe_cam.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_poe_cam.menu.DebugLevel.warn=Warn
|
|
m5stack_poe_cam.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_poe_cam.menu.DebugLevel.info=Info
|
|
m5stack_poe_cam.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_poe_cam.menu.DebugLevel.debug=Debug
|
|
m5stack_poe_cam.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_poe_cam.menu.DebugLevel.verbose=Verbose
|
|
m5stack_poe_cam.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_poe_cam.menu.EraseFlash.none=Disabled
|
|
m5stack_poe_cam.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_poe_cam.menu.EraseFlash.all=Enabled
|
|
m5stack_poe_cam.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_paper.name=M5Paper
|
|
|
|
m5stack_paper.bootloader.tool=esptool_py
|
|
m5stack_paper.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_paper.upload.tool=esptool_py
|
|
m5stack_paper.upload.tool.default=esptool_py
|
|
m5stack_paper.upload.tool.network=esp_ota
|
|
|
|
m5stack_paper.upload.maximum_size=6553600
|
|
m5stack_paper.upload.maximum_data_size=4521984
|
|
m5stack_paper.upload.flags=
|
|
m5stack_paper.upload.extra_flags=
|
|
|
|
m5stack_paper.serial.disableDTR=true
|
|
m5stack_paper.serial.disableRTS=true
|
|
|
|
m5stack_paper.build.tarch=xtensa
|
|
m5stack_paper.build.bootloader_addr=0x1000
|
|
m5stack_paper.build.target=esp32
|
|
m5stack_paper.build.mcu=esp32
|
|
m5stack_paper.build.core=esp32
|
|
m5stack_paper.build.variant=m5stack_paper
|
|
m5stack_paper.build.board=M5STACK_PAPER
|
|
|
|
m5stack_paper.build.f_cpu=240000000L
|
|
m5stack_paper.build.flash_size=16MB
|
|
m5stack_paper.build.flash_freq=80m
|
|
m5stack_paper.build.flash_mode=dio
|
|
m5stack_paper.build.boot=dio
|
|
m5stack_paper.build.partitions=default
|
|
m5stack_paper.build.defines=
|
|
m5stack_paper.build.loop_core=
|
|
m5stack_paper.build.event_core=
|
|
|
|
m5stack_paper.menu.PSRAM.enabled=Enabled
|
|
m5stack_paper.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
m5stack_paper.menu.PSRAM.enabled.build.extra_libs=
|
|
m5stack_paper.menu.PSRAM.disabled=Disabled
|
|
m5stack_paper.menu.PSRAM.disabled.build.defines=
|
|
m5stack_paper.menu.PSRAM.disabled.build.extra_libs=
|
|
|
|
m5stack_paper.menu.PartitionScheme.default=Default (2 x 6.5 MB app, 3.6 MB SPIFFS)
|
|
m5stack_paper.menu.PartitionScheme.default.build.partitions=default_16MB
|
|
m5stack_paper.menu.PartitionScheme.default.upload.maximum_size=6553600
|
|
m5stack_paper.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_paper.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_paper.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_paper.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_paper.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_paper.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_paper.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_paper.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_paper.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_paper.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_paper.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_paper.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_paper.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_paper.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_paper.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_paper.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_paper.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_paper.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_paper.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_paper.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_paper.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_paper.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_paper.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_paper.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_paper.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_paper.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_paper.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_paper.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_paper.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
m5stack_paper.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
m5stack_paper.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
m5stack_paper.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_paper.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_paper.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_paper.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_paper.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_paper.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_paper.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
m5stack_paper.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
m5stack_paper.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
m5stack_paper.menu.PartitionScheme.custom=Custom
|
|
m5stack_paper.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_paper.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_paper.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
m5stack_paper.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_paper.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
m5stack_paper.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_paper.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
m5stack_paper.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_paper.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
m5stack_paper.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_paper.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
m5stack_paper.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
m5stack_paper.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
m5stack_paper.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_paper.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
m5stack_paper.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
m5stack_paper.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
m5stack_paper.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_paper.menu.FlashMode.qio=QIO
|
|
m5stack_paper.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_paper.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_paper.menu.FlashMode.dio=DIO
|
|
m5stack_paper.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_paper.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_paper.menu.FlashMode.qout=QOUT
|
|
m5stack_paper.menu.FlashMode.qout.build.flash_mode=dout
|
|
m5stack_paper.menu.FlashMode.qout.build.boot=qout
|
|
m5stack_paper.menu.FlashMode.dout=DOUT
|
|
m5stack_paper.menu.FlashMode.dout.build.flash_mode=dout
|
|
m5stack_paper.menu.FlashMode.dout.build.boot=dout
|
|
|
|
m5stack_paper.menu.FlashFreq.80=80MHz
|
|
m5stack_paper.menu.FlashFreq.80.build.flash_freq=80m
|
|
m5stack_paper.menu.FlashFreq.40=40MHz
|
|
m5stack_paper.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
m5stack_paper.menu.FlashSize.16M=16MB (128Mb)
|
|
m5stack_paper.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
m5stack_paper.menu.UploadSpeed.1500000=1500000
|
|
m5stack_paper.menu.UploadSpeed.1500000.upload.speed=1500000
|
|
m5stack_paper.menu.UploadSpeed.921600=921600
|
|
m5stack_paper.menu.UploadSpeed.921600.upload.speed=921600
|
|
m5stack_paper.menu.UploadSpeed.115200=115200
|
|
m5stack_paper.menu.UploadSpeed.115200.upload.speed=115200
|
|
m5stack_paper.menu.UploadSpeed.256000.windows=256000
|
|
m5stack_paper.menu.UploadSpeed.256000.upload.speed=256000
|
|
m5stack_paper.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
m5stack_paper.menu.UploadSpeed.230400=230400
|
|
m5stack_paper.menu.UploadSpeed.230400.upload.speed=230400
|
|
m5stack_paper.menu.UploadSpeed.460800.linux=460800
|
|
m5stack_paper.menu.UploadSpeed.460800.macosx=460800
|
|
m5stack_paper.menu.UploadSpeed.460800.upload.speed=460800
|
|
m5stack_paper.menu.UploadSpeed.512000.windows=512000
|
|
m5stack_paper.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
m5stack_paper.menu.LoopCore.1=Core 1
|
|
m5stack_paper.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_paper.menu.LoopCore.0=Core 0
|
|
m5stack_paper.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_paper.menu.EventsCore.1=Core 1
|
|
m5stack_paper.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_paper.menu.EventsCore.0=Core 0
|
|
m5stack_paper.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_paper.menu.DebugLevel.none=None
|
|
m5stack_paper.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_paper.menu.DebugLevel.error=Error
|
|
m5stack_paper.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_paper.menu.DebugLevel.warn=Warn
|
|
m5stack_paper.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_paper.menu.DebugLevel.info=Info
|
|
m5stack_paper.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_paper.menu.DebugLevel.debug=Debug
|
|
m5stack_paper.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_paper.menu.DebugLevel.verbose=Verbose
|
|
m5stack_paper.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_paper.menu.EraseFlash.none=Disabled
|
|
m5stack_paper.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_paper.menu.EraseFlash.all=Enabled
|
|
m5stack_paper.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_coreink.name=M5CoreInk
|
|
|
|
m5stack_coreink.bootloader.tool=esptool_py
|
|
m5stack_coreink.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_coreink.upload.tool=esptool_py
|
|
m5stack_coreink.upload.tool.default=esptool_py
|
|
m5stack_coreink.upload.tool.network=esp_ota
|
|
|
|
m5stack_coreink.upload.maximum_size=1310720
|
|
m5stack_coreink.upload.maximum_data_size=327680
|
|
m5stack_coreink.upload.flags=
|
|
m5stack_coreink.upload.extra_flags=
|
|
|
|
m5stack_coreink.serial.disableDTR=true
|
|
m5stack_coreink.serial.disableRTS=true
|
|
|
|
m5stack_coreink.build.tarch=xtensa
|
|
m5stack_coreink.build.bootloader_addr=0x1000
|
|
m5stack_coreink.build.target=esp32
|
|
m5stack_coreink.build.mcu=esp32
|
|
m5stack_coreink.build.core=esp32
|
|
m5stack_coreink.build.variant=m5stack_coreink
|
|
m5stack_coreink.build.board=M5STACK_COREINK
|
|
|
|
m5stack_coreink.build.f_cpu=240000000L
|
|
m5stack_coreink.build.flash_size=4MB
|
|
m5stack_coreink.build.flash_freq=80m
|
|
m5stack_coreink.build.flash_mode=dio
|
|
m5stack_coreink.build.boot=dio
|
|
m5stack_coreink.build.partitions=default
|
|
m5stack_coreink.build.defines=
|
|
m5stack_coreink.build.loop_core=
|
|
m5stack_coreink.build.event_core=
|
|
|
|
m5stack_coreink.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_coreink.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_coreink.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_coreink.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_coreink.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_coreink.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_coreink.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_coreink.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_coreink.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_coreink.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_coreink.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_coreink.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_coreink.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_coreink.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_coreink.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_coreink.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_coreink.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_coreink.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_coreink.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_coreink.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_coreink.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_coreink.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_coreink.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_coreink.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_coreink.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_coreink.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_coreink.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_coreink.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_coreink.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_coreink.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_coreink.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_coreink.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_coreink.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_coreink.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_coreink.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_coreink.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_coreink.menu.PartitionScheme.custom=Custom
|
|
m5stack_coreink.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_coreink.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_coreink.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
m5stack_coreink.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_coreink.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
m5stack_coreink.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_coreink.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
m5stack_coreink.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_coreink.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
m5stack_coreink.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_coreink.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
m5stack_coreink.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
m5stack_coreink.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
m5stack_coreink.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_coreink.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
m5stack_coreink.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
m5stack_coreink.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
m5stack_coreink.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_coreink.menu.FlashMode.qio=QIO
|
|
m5stack_coreink.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_coreink.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_coreink.menu.FlashMode.dio=DIO
|
|
m5stack_coreink.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_coreink.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_coreink.menu.FlashMode.qout=QOUT
|
|
m5stack_coreink.menu.FlashMode.qout.build.flash_mode=dout
|
|
m5stack_coreink.menu.FlashMode.qout.build.boot=qout
|
|
m5stack_coreink.menu.FlashMode.dout=DOUT
|
|
m5stack_coreink.menu.FlashMode.dout.build.flash_mode=dout
|
|
m5stack_coreink.menu.FlashMode.dout.build.boot=dout
|
|
|
|
m5stack_coreink.menu.FlashFreq.80=80MHz
|
|
m5stack_coreink.menu.FlashFreq.80.build.flash_freq=80m
|
|
m5stack_coreink.menu.FlashFreq.40=40MHz
|
|
m5stack_coreink.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
m5stack_coreink.menu.FlashSize.4M=4MB (32Mb)
|
|
m5stack_coreink.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
m5stack_coreink.menu.UploadSpeed.1500000=1500000
|
|
m5stack_coreink.menu.UploadSpeed.1500000.upload.speed=1500000
|
|
m5stack_coreink.menu.UploadSpeed.750000=750000
|
|
m5stack_coreink.menu.UploadSpeed.750000.upload.speed=750000
|
|
m5stack_coreink.menu.UploadSpeed.500000=500000
|
|
m5stack_coreink.menu.UploadSpeed.500000.upload.speed=500000
|
|
m5stack_coreink.menu.UploadSpeed.250000=250000
|
|
m5stack_coreink.menu.UploadSpeed.250000.upload.speed=250000
|
|
m5stack_coreink.menu.UploadSpeed.115200=115200
|
|
m5stack_coreink.menu.UploadSpeed.115200.upload.speed=115200
|
|
|
|
m5stack_coreink.menu.LoopCore.1=Core 1
|
|
m5stack_coreink.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_coreink.menu.LoopCore.0=Core 0
|
|
m5stack_coreink.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_coreink.menu.EventsCore.1=Core 1
|
|
m5stack_coreink.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_coreink.menu.EventsCore.0=Core 0
|
|
m5stack_coreink.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_coreink.menu.DebugLevel.none=None
|
|
m5stack_coreink.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_coreink.menu.DebugLevel.error=Error
|
|
m5stack_coreink.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_coreink.menu.DebugLevel.warn=Warn
|
|
m5stack_coreink.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_coreink.menu.DebugLevel.info=Info
|
|
m5stack_coreink.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_coreink.menu.DebugLevel.debug=Debug
|
|
m5stack_coreink.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_coreink.menu.DebugLevel.verbose=Verbose
|
|
m5stack_coreink.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_coreink.menu.EraseFlash.none=Disabled
|
|
m5stack_coreink.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_coreink.menu.EraseFlash.all=Enabled
|
|
m5stack_coreink.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
###############################################################
|
|
|
|
m5stack_stamp_pico.name=M5StampPico
|
|
|
|
m5stack_stamp_pico.bootloader.tool=esptool_py
|
|
m5stack_stamp_pico.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_stamp_pico.upload.tool=esptool_py
|
|
m5stack_stamp_pico.upload.tool.default=esptool_py
|
|
m5stack_stamp_pico.upload.tool.network=esp_ota
|
|
|
|
m5stack_stamp_pico.upload.maximum_size=1310720
|
|
m5stack_stamp_pico.upload.maximum_data_size=327680
|
|
m5stack_stamp_pico.upload.flags=
|
|
m5stack_stamp_pico.upload.extra_flags=
|
|
|
|
m5stack_stamp_pico.serial.disableDTR=true
|
|
m5stack_stamp_pico.serial.disableRTS=true
|
|
|
|
m5stack_stamp_pico.build.tarch=xtensa
|
|
m5stack_stamp_pico.build.bootloader_addr=0x1000
|
|
m5stack_stamp_pico.build.target=esp32
|
|
m5stack_stamp_pico.build.mcu=esp32
|
|
m5stack_stamp_pico.build.core=esp32
|
|
m5stack_stamp_pico.build.variant=m5stack_stamp_pico
|
|
m5stack_stamp_pico.build.board=M5STACK_STAMP_PICO
|
|
|
|
m5stack_stamp_pico.build.f_cpu=240000000L
|
|
m5stack_stamp_pico.build.flash_size=4MB
|
|
m5stack_stamp_pico.build.flash_freq=80m
|
|
m5stack_stamp_pico.build.flash_mode=dio
|
|
m5stack_stamp_pico.build.boot=dio
|
|
m5stack_stamp_pico.build.partitions=default
|
|
m5stack_stamp_pico.build.defines=
|
|
m5stack_stamp_pico.build.loop_core=
|
|
m5stack_stamp_pico.build.event_core=
|
|
|
|
m5stack_stamp_pico.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_stamp_pico.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_stamp_pico.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_stamp_pico.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_stamp_pico.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_stamp_pico.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_stamp_pico.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_stamp_pico.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_stamp_pico.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_stamp_pico.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_stamp_pico.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_stamp_pico.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_stamp_pico.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_stamp_pico.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_stamp_pico.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_stamp_pico.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_stamp_pico.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_stamp_pico.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_stamp_pico.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_stamp_pico.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_stamp_pico.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_stamp_pico.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_stamp_pico.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_stamp_pico.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_stamp_pico.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_stamp_pico.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_stamp_pico.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_stamp_pico.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_stamp_pico.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_stamp_pico.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_stamp_pico.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_stamp_pico.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_stamp_pico.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_stamp_pico.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_stamp_pico.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_stamp_pico.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_stamp_pico.menu.PartitionScheme.custom=Custom
|
|
m5stack_stamp_pico.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_stamp_pico.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_stamp_pico.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
m5stack_stamp_pico.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_stamp_pico.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
m5stack_stamp_pico.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_stamp_pico.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
m5stack_stamp_pico.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_stamp_pico.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
m5stack_stamp_pico.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_stamp_pico.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
m5stack_stamp_pico.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
m5stack_stamp_pico.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
m5stack_stamp_pico.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_stamp_pico.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
m5stack_stamp_pico.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
m5stack_stamp_pico.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
m5stack_stamp_pico.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_stamp_pico.menu.FlashMode.qio=QIO
|
|
m5stack_stamp_pico.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_stamp_pico.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_stamp_pico.menu.FlashMode.dio=DIO
|
|
m5stack_stamp_pico.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_stamp_pico.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_stamp_pico.menu.FlashMode.qout=QOUT
|
|
m5stack_stamp_pico.menu.FlashMode.qout.build.flash_mode=dout
|
|
m5stack_stamp_pico.menu.FlashMode.qout.build.boot=qout
|
|
m5stack_stamp_pico.menu.FlashMode.dout=DOUT
|
|
m5stack_stamp_pico.menu.FlashMode.dout.build.flash_mode=dout
|
|
m5stack_stamp_pico.menu.FlashMode.dout.build.boot=dout
|
|
|
|
m5stack_stamp_pico.menu.FlashFreq.80=80MHz
|
|
m5stack_stamp_pico.menu.FlashFreq.80.build.flash_freq=80m
|
|
m5stack_stamp_pico.menu.FlashFreq.40=40MHz
|
|
m5stack_stamp_pico.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
m5stack_stamp_pico.menu.FlashSize.4M=4MB (32Mb)
|
|
m5stack_stamp_pico.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
m5stack_stamp_pico.menu.UploadSpeed.1500000=1500000
|
|
m5stack_stamp_pico.menu.UploadSpeed.1500000.upload.speed=1500000
|
|
m5stack_stamp_pico.menu.UploadSpeed.750000=750000
|
|
m5stack_stamp_pico.menu.UploadSpeed.750000.upload.speed=750000
|
|
m5stack_stamp_pico.menu.UploadSpeed.500000=500000
|
|
m5stack_stamp_pico.menu.UploadSpeed.500000.upload.speed=500000
|
|
m5stack_stamp_pico.menu.UploadSpeed.250000=250000
|
|
m5stack_stamp_pico.menu.UploadSpeed.250000.upload.speed=250000
|
|
m5stack_stamp_pico.menu.UploadSpeed.115200=115200
|
|
m5stack_stamp_pico.menu.UploadSpeed.115200.upload.speed=115200
|
|
|
|
m5stack_stamp_pico.menu.LoopCore.1=Core 1
|
|
m5stack_stamp_pico.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_stamp_pico.menu.LoopCore.0=Core 0
|
|
m5stack_stamp_pico.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_stamp_pico.menu.EventsCore.1=Core 1
|
|
m5stack_stamp_pico.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_stamp_pico.menu.EventsCore.0=Core 0
|
|
m5stack_stamp_pico.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_stamp_pico.menu.DebugLevel.none=None
|
|
m5stack_stamp_pico.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_stamp_pico.menu.DebugLevel.error=Error
|
|
m5stack_stamp_pico.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_stamp_pico.menu.DebugLevel.warn=Warn
|
|
m5stack_stamp_pico.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_stamp_pico.menu.DebugLevel.info=Info
|
|
m5stack_stamp_pico.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_stamp_pico.menu.DebugLevel.debug=Debug
|
|
m5stack_stamp_pico.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_stamp_pico.menu.DebugLevel.verbose=Verbose
|
|
m5stack_stamp_pico.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_stamp_pico.menu.EraseFlash.none=Disabled
|
|
m5stack_stamp_pico.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_stamp_pico.menu.EraseFlash.all=Enabled
|
|
m5stack_stamp_pico.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_stamp_c3.name=M5StampC3
|
|
|
|
m5stack_stamp_c3.bootloader.tool=esptool_py
|
|
m5stack_stamp_c3.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_stamp_c3.upload.tool=esptool_py
|
|
m5stack_stamp_c3.upload.tool.default=esptool_py
|
|
m5stack_stamp_c3.upload.tool.network=esp_ota
|
|
|
|
m5stack_stamp_c3.upload.maximum_size=1310720
|
|
m5stack_stamp_c3.upload.maximum_data_size=327680
|
|
m5stack_stamp_c3.upload.wait_for_upload_port=false
|
|
m5stack_stamp_c3.upload.flags=
|
|
m5stack_stamp_c3.upload.extra_flags=
|
|
|
|
m5stack_stamp_c3.serial.disableDTR=false
|
|
m5stack_stamp_c3.serial.disableRTS=false
|
|
|
|
m5stack_stamp_c3.build.tarch=riscv32
|
|
m5stack_stamp_c3.build.target=esp
|
|
m5stack_stamp_c3.build.mcu=esp32c3
|
|
m5stack_stamp_c3.build.core=esp32
|
|
m5stack_stamp_c3.build.variant=m5stack_stamp_c3
|
|
m5stack_stamp_c3.build.board=M5STACK_STAMP_C3
|
|
m5stack_stamp_c3.build.bootloader_addr=0x0
|
|
|
|
m5stack_stamp_c3.build.cdc_on_boot=1
|
|
m5stack_stamp_c3.build.f_cpu=160000000L
|
|
m5stack_stamp_c3.build.flash_size=4MB
|
|
m5stack_stamp_c3.build.flash_freq=80m
|
|
m5stack_stamp_c3.build.flash_mode=qio
|
|
m5stack_stamp_c3.build.boot=qio
|
|
m5stack_stamp_c3.build.partitions=default
|
|
m5stack_stamp_c3.build.defines=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
m5stack_stamp_c3.menu.JTAGAdapter.default=Disabled
|
|
m5stack_stamp_c3.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
m5stack_stamp_c3.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
m5stack_stamp_c3.menu.JTAGAdapter.builtin.build.openocdscript=esp32c3-builtin.cfg
|
|
m5stack_stamp_c3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
m5stack_stamp_c3.menu.JTAGAdapter.external=FTDI Adapter
|
|
m5stack_stamp_c3.menu.JTAGAdapter.external.build.openocdscript=esp32c3-ftdi.cfg
|
|
m5stack_stamp_c3.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
m5stack_stamp_c3.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
m5stack_stamp_c3.menu.JTAGAdapter.bridge.build.openocdscript=esp32c3-bridge.cfg
|
|
m5stack_stamp_c3.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
m5stack_stamp_c3.menu.CDCOnBoot.cdc=Enabled
|
|
m5stack_stamp_c3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
m5stack_stamp_c3.menu.CDCOnBoot.default=Disabled
|
|
m5stack_stamp_c3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
m5stack_stamp_c3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_stamp_c3.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_stamp_c3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_stamp_c3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_stamp_c3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_stamp_c3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_stamp_c3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_stamp_c3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_stamp_c3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_stamp_c3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_stamp_c3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_stamp_c3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_stamp_c3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_stamp_c3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_stamp_c3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_stamp_c3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_stamp_c3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_stamp_c3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_stamp_c3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_stamp_c3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_stamp_c3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_stamp_c3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_stamp_c3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_stamp_c3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
|
|
m5stack_stamp_c3.menu.CPUFreq.160=160MHz (WiFi)
|
|
m5stack_stamp_c3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_stamp_c3.menu.CPUFreq.80=80MHz (WiFi)
|
|
m5stack_stamp_c3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_stamp_c3.menu.CPUFreq.40=40MHz
|
|
m5stack_stamp_c3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_stamp_c3.menu.CPUFreq.20=20MHz
|
|
m5stack_stamp_c3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_stamp_c3.menu.CPUFreq.10=10MHz
|
|
m5stack_stamp_c3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_stamp_c3.menu.FlashMode.qio=QIO
|
|
m5stack_stamp_c3.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_stamp_c3.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_stamp_c3.menu.FlashMode.dio=DIO
|
|
m5stack_stamp_c3.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_stamp_c3.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_stamp_c3.menu.FlashMode.qout=QOUT
|
|
m5stack_stamp_c3.menu.FlashMode.qout.build.flash_mode=dout
|
|
m5stack_stamp_c3.menu.FlashMode.qout.build.boot=qout
|
|
m5stack_stamp_c3.menu.FlashMode.dout=DOUT
|
|
m5stack_stamp_c3.menu.FlashMode.dout.build.flash_mode=dout
|
|
m5stack_stamp_c3.menu.FlashMode.dout.build.boot=dout
|
|
|
|
m5stack_stamp_c3.menu.FlashFreq.80=80MHz
|
|
m5stack_stamp_c3.menu.FlashFreq.80.build.flash_freq=80m
|
|
m5stack_stamp_c3.menu.FlashFreq.40=40MHz
|
|
m5stack_stamp_c3.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
m5stack_stamp_c3.menu.FlashSize.4M=4MB (32Mb)
|
|
m5stack_stamp_c3.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
m5stack_stamp_c3.menu.UploadSpeed.921600=921600
|
|
m5stack_stamp_c3.menu.UploadSpeed.921600.upload.speed=921600
|
|
m5stack_stamp_c3.menu.UploadSpeed.115200=115200
|
|
m5stack_stamp_c3.menu.UploadSpeed.115200.upload.speed=115200
|
|
m5stack_stamp_c3.menu.UploadSpeed.256000.windows=256000
|
|
m5stack_stamp_c3.menu.UploadSpeed.256000.upload.speed=256000
|
|
m5stack_stamp_c3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
m5stack_stamp_c3.menu.UploadSpeed.230400=230400
|
|
m5stack_stamp_c3.menu.UploadSpeed.230400.upload.speed=230400
|
|
m5stack_stamp_c3.menu.UploadSpeed.460800.linux=460800
|
|
m5stack_stamp_c3.menu.UploadSpeed.460800.macosx=460800
|
|
m5stack_stamp_c3.menu.UploadSpeed.460800.upload.speed=460800
|
|
m5stack_stamp_c3.menu.UploadSpeed.512000.windows=512000
|
|
m5stack_stamp_c3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
m5stack_stamp_c3.menu.DebugLevel.none=None
|
|
m5stack_stamp_c3.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_stamp_c3.menu.DebugLevel.error=Error
|
|
m5stack_stamp_c3.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_stamp_c3.menu.DebugLevel.warn=Warn
|
|
m5stack_stamp_c3.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_stamp_c3.menu.DebugLevel.info=Info
|
|
m5stack_stamp_c3.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_stamp_c3.menu.DebugLevel.debug=Debug
|
|
m5stack_stamp_c3.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_stamp_c3.menu.DebugLevel.verbose=Verbose
|
|
m5stack_stamp_c3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_stamp_c3.menu.EraseFlash.none=Disabled
|
|
m5stack_stamp_c3.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_stamp_c3.menu.EraseFlash.all=Enabled
|
|
m5stack_stamp_c3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
###############################################################
|
|
|
|
m5stack_stamp_s3.name=M5StampS3
|
|
m5stack_stamp_s3.bootloader.tool=esptool_py
|
|
m5stack_stamp_s3.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_stamp_s3.upload.tool=esptool_py
|
|
m5stack_stamp_s3.upload.tool.default=esptool_py
|
|
m5stack_stamp_s3.upload.tool.network=esp_ota
|
|
|
|
m5stack_stamp_s3.upload.maximum_size=1310720
|
|
m5stack_stamp_s3.upload.maximum_data_size=327680
|
|
m5stack_stamp_s3.upload.flags=
|
|
m5stack_stamp_s3.upload.extra_flags=
|
|
m5stack_stamp_s3.upload.use_1200bps_touch=false
|
|
m5stack_stamp_s3.upload.wait_for_upload_port=false
|
|
|
|
m5stack_stamp_s3.serial.disableDTR=false
|
|
m5stack_stamp_s3.serial.disableRTS=false
|
|
|
|
m5stack_stamp_s3.build.tarch=xtensa
|
|
m5stack_stamp_s3.build.bootloader_addr=0x0
|
|
m5stack_stamp_s3.build.target=esp32s3
|
|
m5stack_stamp_s3.build.mcu=esp32s3
|
|
m5stack_stamp_s3.build.core=esp32
|
|
m5stack_stamp_s3.build.variant=m5stack_stamp_s3
|
|
m5stack_stamp_s3.build.board=M5STACK_STAMP_S3
|
|
|
|
m5stack_stamp_s3.build.usb_mode=1
|
|
m5stack_stamp_s3.build.cdc_on_boot=1
|
|
m5stack_stamp_s3.build.msc_on_boot=0
|
|
m5stack_stamp_s3.build.dfu_on_boot=0
|
|
m5stack_stamp_s3.build.f_cpu=240000000L
|
|
m5stack_stamp_s3.build.flash_size=8MB
|
|
m5stack_stamp_s3.build.flash_freq=80m
|
|
m5stack_stamp_s3.build.flash_mode=dio
|
|
m5stack_stamp_s3.build.boot=qio
|
|
m5stack_stamp_s3.build.boot_freq=80m
|
|
m5stack_stamp_s3.build.partitions=default_8MB
|
|
m5stack_stamp_s3.build.defines=
|
|
m5stack_stamp_s3.build.loop_core=
|
|
m5stack_stamp_s3.build.event_core=
|
|
m5stack_stamp_s3.build.psram_type=qspi
|
|
m5stack_stamp_s3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
m5stack_stamp_s3.menu.JTAGAdapter.default=Disabled
|
|
m5stack_stamp_s3.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
m5stack_stamp_s3.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
m5stack_stamp_s3.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
m5stack_stamp_s3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
m5stack_stamp_s3.menu.JTAGAdapter.external=FTDI Adapter
|
|
m5stack_stamp_s3.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
m5stack_stamp_s3.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
m5stack_stamp_s3.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
m5stack_stamp_s3.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
m5stack_stamp_s3.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
m5stack_stamp_s3.menu.PSRAM.disabled=Disabled
|
|
m5stack_stamp_s3.menu.PSRAM.disabled.build.defines=
|
|
m5stack_stamp_s3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
m5stack_stamp_s3.menu.PSRAM.enabled=QSPI PSRAM
|
|
m5stack_stamp_s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
m5stack_stamp_s3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
m5stack_stamp_s3.menu.PSRAM.opi=OPI PSRAM
|
|
m5stack_stamp_s3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
m5stack_stamp_s3.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
m5stack_stamp_s3.menu.FlashMode.qio=QIO 80MHz
|
|
m5stack_stamp_s3.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_stamp_s3.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_stamp_s3.menu.FlashMode.qio.build.boot_freq=80m
|
|
m5stack_stamp_s3.menu.FlashMode.qio.build.flash_freq=80m
|
|
m5stack_stamp_s3.menu.FlashMode.qio120=QIO 120MHz
|
|
m5stack_stamp_s3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
m5stack_stamp_s3.menu.FlashMode.qio120.build.boot=qio
|
|
m5stack_stamp_s3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
m5stack_stamp_s3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
m5stack_stamp_s3.menu.FlashMode.dio=DIO 80MHz
|
|
m5stack_stamp_s3.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_stamp_s3.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_stamp_s3.menu.FlashMode.dio.build.boot_freq=80m
|
|
m5stack_stamp_s3.menu.FlashMode.dio.build.flash_freq=80m
|
|
m5stack_stamp_s3.menu.FlashMode.opi=OPI 80MHz
|
|
m5stack_stamp_s3.menu.FlashMode.opi.build.flash_mode=dout
|
|
m5stack_stamp_s3.menu.FlashMode.opi.build.boot=opi
|
|
m5stack_stamp_s3.menu.FlashMode.opi.build.boot_freq=80m
|
|
m5stack_stamp_s3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
m5stack_stamp_s3.menu.FlashSize.4M=4MB (32Mb)
|
|
m5stack_stamp_s3.menu.FlashSize.4M.build.flash_size=4MB
|
|
m5stack_stamp_s3.menu.FlashSize.8M=8MB (64Mb)
|
|
m5stack_stamp_s3.menu.FlashSize.8M.build.flash_size=8MB
|
|
m5stack_stamp_s3.menu.FlashSize.8M.build.partitions=default_8MB
|
|
m5stack_stamp_s3.menu.FlashSize.16M=16MB (128Mb)
|
|
m5stack_stamp_s3.menu.FlashSize.16M.build.flash_size=16MB
|
|
m5stack_stamp_s3.menu.FlashSize.32M=32MB (256Mb)
|
|
m5stack_stamp_s3.menu.FlashSize.32M.build.flash_size=32MB
|
|
m5stack_stamp_s3.menu.FlashSize.32M.build.partitions=app5M_fat24M_32MB
|
|
|
|
m5stack_stamp_s3.menu.LoopCore.1=Core 1
|
|
m5stack_stamp_s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_stamp_s3.menu.LoopCore.0=Core 0
|
|
m5stack_stamp_s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_stamp_s3.menu.EventsCore.1=Core 1
|
|
m5stack_stamp_s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_stamp_s3.menu.EventsCore.0=Core 0
|
|
m5stack_stamp_s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_stamp_s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
m5stack_stamp_s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
m5stack_stamp_s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
m5stack_stamp_s3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
m5stack_stamp_s3.menu.CDCOnBoot.cdc=Enabled
|
|
m5stack_stamp_s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
m5stack_stamp_s3.menu.CDCOnBoot.default=Disabled
|
|
m5stack_stamp_s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
m5stack_stamp_s3.menu.MSCOnBoot.default=Disabled
|
|
m5stack_stamp_s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
m5stack_stamp_s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
m5stack_stamp_s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
m5stack_stamp_s3.menu.DFUOnBoot.default=Disabled
|
|
m5stack_stamp_s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
m5stack_stamp_s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
m5stack_stamp_s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
m5stack_stamp_s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
m5stack_stamp_s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
m5stack_stamp_s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
m5stack_stamp_s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
m5stack_stamp_s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
m5stack_stamp_s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
m5stack_stamp_s3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_stamp_s3.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_stamp_s3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_stamp_s3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_stamp_s3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_stamp_s3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_stamp_s3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_stamp_s3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_stamp_s3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_stamp_s3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_stamp_s3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_stamp_s3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_stamp_s3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_stamp_s3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_stamp_s3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_stamp_s3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_stamp_s3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_stamp_s3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_stamp_s3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_stamp_s3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_stamp_s3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_stamp_s3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_stamp_s3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_stamp_s3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_stamp_s3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_stamp_s3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_stamp_s3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_stamp_s3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_stamp_s3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_stamp_s3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_stamp_s3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
m5stack_stamp_s3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
m5stack_stamp_s3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
m5stack_stamp_s3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_stamp_s3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_stamp_s3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_stamp_s3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_stamp_s3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_stamp_s3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_stamp_s3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
m5stack_stamp_s3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
m5stack_stamp_s3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
m5stack_stamp_s3.menu.PartitionScheme.app5M_fat24M_32MB=32M Flash (4.8MB APP/22MB FATFS)
|
|
m5stack_stamp_s3.menu.PartitionScheme.app5M_fat24M_32MB.build.partitions=large_fat_32MB
|
|
m5stack_stamp_s3.menu.PartitionScheme.app5M_fat24M_32MB.upload.maximum_size=4718592
|
|
m5stack_stamp_s3.menu.PartitionScheme.app5M_little24M_32MB=32M Flash (4.8MB APP/22MB LittleFS)
|
|
m5stack_stamp_s3.menu.PartitionScheme.app5M_little24M_32MB.build.partitions=large_littlefs_32MB
|
|
m5stack_stamp_s3.menu.PartitionScheme.app5M_little24M_32MB.upload.maximum_size=4718592
|
|
m5stack_stamp_s3.menu.PartitionScheme.esp_sr_16=ESP SR 16M (3MB APP/7MB SPIFFS/2.9MB MODEL)
|
|
m5stack_stamp_s3.menu.PartitionScheme.esp_sr_16.upload.maximum_size=3145728
|
|
m5stack_stamp_s3.menu.PartitionScheme.esp_sr_16.upload.extra_flags=0xD10000 {build.path}/srmodels.bin
|
|
m5stack_stamp_s3.menu.PartitionScheme.esp_sr_16.build.partitions=esp_sr_16
|
|
m5stack_stamp_s3.menu.PartitionScheme.custom=Custom
|
|
m5stack_stamp_s3.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_stamp_s3.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_stamp_s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
m5stack_stamp_s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_stamp_s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
m5stack_stamp_s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_stamp_s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
m5stack_stamp_s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_stamp_s3.menu.CPUFreq.40=40MHz
|
|
m5stack_stamp_s3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_stamp_s3.menu.CPUFreq.20=20MHz
|
|
m5stack_stamp_s3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_stamp_s3.menu.CPUFreq.10=10MHz
|
|
m5stack_stamp_s3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_stamp_s3.menu.UploadSpeed.921600=921600
|
|
m5stack_stamp_s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
m5stack_stamp_s3.menu.UploadSpeed.115200=115200
|
|
m5stack_stamp_s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
m5stack_stamp_s3.menu.UploadSpeed.256000.windows=256000
|
|
m5stack_stamp_s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
m5stack_stamp_s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
m5stack_stamp_s3.menu.UploadSpeed.230400=230400
|
|
m5stack_stamp_s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
m5stack_stamp_s3.menu.UploadSpeed.460800.linux=460800
|
|
m5stack_stamp_s3.menu.UploadSpeed.460800.macosx=460800
|
|
m5stack_stamp_s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
m5stack_stamp_s3.menu.UploadSpeed.512000.windows=512000
|
|
m5stack_stamp_s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
m5stack_stamp_s3.menu.DebugLevel.none=None
|
|
m5stack_stamp_s3.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_stamp_s3.menu.DebugLevel.error=Error
|
|
m5stack_stamp_s3.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_stamp_s3.menu.DebugLevel.warn=Warn
|
|
m5stack_stamp_s3.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_stamp_s3.menu.DebugLevel.info=Info
|
|
m5stack_stamp_s3.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_stamp_s3.menu.DebugLevel.debug=Debug
|
|
m5stack_stamp_s3.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_stamp_s3.menu.DebugLevel.verbose=Verbose
|
|
m5stack_stamp_s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_stamp_s3.menu.EraseFlash.none=Disabled
|
|
m5stack_stamp_s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_stamp_s3.menu.EraseFlash.all=Enabled
|
|
m5stack_stamp_s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_capsule.name=M5Capsule
|
|
m5stack_capsule.bootloader.tool=esptool_py
|
|
m5stack_capsule.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_capsule.upload.tool=esptool_py
|
|
m5stack_capsule.upload.tool.default=esptool_py
|
|
m5stack_capsule.upload.tool.network=esp_ota
|
|
|
|
m5stack_capsule.upload.maximum_size=1310720
|
|
m5stack_capsule.upload.maximum_data_size=327680
|
|
m5stack_capsule.upload.flags=
|
|
m5stack_capsule.upload.extra_flags=
|
|
m5stack_capsule.upload.use_1200bps_touch=false
|
|
m5stack_capsule.upload.wait_for_upload_port=false
|
|
|
|
m5stack_capsule.serial.disableDTR=false
|
|
m5stack_capsule.serial.disableRTS=false
|
|
|
|
m5stack_capsule.build.tarch=xtensa
|
|
m5stack_capsule.build.bootloader_addr=0x0
|
|
m5stack_capsule.build.target=esp32s3
|
|
m5stack_capsule.build.mcu=esp32s3
|
|
m5stack_capsule.build.core=esp32
|
|
m5stack_capsule.build.variant=m5stack_capsule
|
|
m5stack_capsule.build.board=M5STACK_CAPSULE
|
|
|
|
m5stack_capsule.build.usb_mode=1
|
|
m5stack_capsule.build.cdc_on_boot=1
|
|
m5stack_capsule.build.msc_on_boot=0
|
|
m5stack_capsule.build.dfu_on_boot=0
|
|
m5stack_capsule.build.f_cpu=240000000L
|
|
m5stack_capsule.build.flash_size=8MB
|
|
m5stack_capsule.build.flash_freq=80m
|
|
m5stack_capsule.build.flash_mode=dio
|
|
m5stack_capsule.build.boot=qio
|
|
m5stack_capsule.build.boot_freq=80m
|
|
m5stack_capsule.build.partitions=default
|
|
m5stack_capsule.build.defines=
|
|
m5stack_capsule.build.loop_core=
|
|
m5stack_capsule.build.event_core=
|
|
m5stack_capsule.build.psram_type=qspi
|
|
m5stack_capsule.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
m5stack_capsule.menu.JTAGAdapter.default=Disabled
|
|
m5stack_capsule.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
m5stack_capsule.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
m5stack_capsule.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
m5stack_capsule.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
m5stack_capsule.menu.JTAGAdapter.external=FTDI Adapter
|
|
m5stack_capsule.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
m5stack_capsule.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
m5stack_capsule.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
m5stack_capsule.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
m5stack_capsule.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
m5stack_capsule.menu.PSRAM.disabled=Disabled
|
|
m5stack_capsule.menu.PSRAM.disabled.build.defines=
|
|
m5stack_capsule.menu.PSRAM.disabled.build.psram_type=qspi
|
|
m5stack_capsule.menu.PSRAM.enabled=QSPI PSRAM
|
|
m5stack_capsule.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
m5stack_capsule.menu.PSRAM.enabled.build.psram_type=qspi
|
|
m5stack_capsule.menu.PSRAM.opi=OPI PSRAM
|
|
m5stack_capsule.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
m5stack_capsule.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
m5stack_capsule.menu.FlashMode.qio=QIO 80MHz
|
|
m5stack_capsule.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_capsule.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_capsule.menu.FlashMode.qio.build.boot_freq=80m
|
|
m5stack_capsule.menu.FlashMode.qio.build.flash_freq=80m
|
|
m5stack_capsule.menu.FlashMode.qio120=QIO 120MHz
|
|
m5stack_capsule.menu.FlashMode.qio120.build.flash_mode=dio
|
|
m5stack_capsule.menu.FlashMode.qio120.build.boot=qio
|
|
m5stack_capsule.menu.FlashMode.qio120.build.boot_freq=120m
|
|
m5stack_capsule.menu.FlashMode.qio120.build.flash_freq=80m
|
|
m5stack_capsule.menu.FlashMode.dio=DIO 80MHz
|
|
m5stack_capsule.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_capsule.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_capsule.menu.FlashMode.dio.build.boot_freq=80m
|
|
m5stack_capsule.menu.FlashMode.dio.build.flash_freq=80m
|
|
m5stack_capsule.menu.FlashMode.opi=OPI 80MHz
|
|
m5stack_capsule.menu.FlashMode.opi.build.flash_mode=dout
|
|
m5stack_capsule.menu.FlashMode.opi.build.boot=opi
|
|
m5stack_capsule.menu.FlashMode.opi.build.boot_freq=80m
|
|
m5stack_capsule.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
m5stack_capsule.menu.FlashSize.4M=4MB (32Mb)
|
|
m5stack_capsule.menu.FlashSize.4M.build.flash_size=4MB
|
|
m5stack_capsule.menu.FlashSize.8M=8MB (64Mb)
|
|
m5stack_capsule.menu.FlashSize.8M.build.flash_size=8MB
|
|
m5stack_capsule.menu.FlashSize.8M.build.partitions=default_8MB
|
|
m5stack_capsule.menu.FlashSize.16M=16MB (128Mb)
|
|
m5stack_capsule.menu.FlashSize.16M.build.flash_size=16MB
|
|
m5stack_capsule.menu.FlashSize.32M=32MB (256Mb)
|
|
m5stack_capsule.menu.FlashSize.32M.build.flash_size=32MB
|
|
m5stack_capsule.menu.FlashSize.32M.build.partitions=app5M_fat24M_32MB
|
|
|
|
m5stack_capsule.menu.LoopCore.1=Core 1
|
|
m5stack_capsule.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_capsule.menu.LoopCore.0=Core 0
|
|
m5stack_capsule.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_capsule.menu.EventsCore.1=Core 1
|
|
m5stack_capsule.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_capsule.menu.EventsCore.0=Core 0
|
|
m5stack_capsule.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_capsule.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
m5stack_capsule.menu.USBMode.hwcdc.build.usb_mode=1
|
|
m5stack_capsule.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
m5stack_capsule.menu.USBMode.default.build.usb_mode=0
|
|
|
|
m5stack_capsule.menu.CDCOnBoot.cdc=Enabled
|
|
m5stack_capsule.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
m5stack_capsule.menu.CDCOnBoot.default=Disabled
|
|
m5stack_capsule.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
m5stack_capsule.menu.MSCOnBoot.default=Disabled
|
|
m5stack_capsule.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
m5stack_capsule.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
m5stack_capsule.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
m5stack_capsule.menu.DFUOnBoot.default=Disabled
|
|
m5stack_capsule.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
m5stack_capsule.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
m5stack_capsule.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
m5stack_capsule.menu.UploadMode.default=UART0 / Hardware CDC
|
|
m5stack_capsule.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
m5stack_capsule.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
m5stack_capsule.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
m5stack_capsule.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
m5stack_capsule.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
m5stack_capsule.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_capsule.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_capsule.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_capsule.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_capsule.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_capsule.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_capsule.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_capsule.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_capsule.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_capsule.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_capsule.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_capsule.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_capsule.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_capsule.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_capsule.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_capsule.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_capsule.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_capsule.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_capsule.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_capsule.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_capsule.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_capsule.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_capsule.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_capsule.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_capsule.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_capsule.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_capsule.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_capsule.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_capsule.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_capsule.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_capsule.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
m5stack_capsule.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
m5stack_capsule.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
m5stack_capsule.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_capsule.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_capsule.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_capsule.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_capsule.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_capsule.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_capsule.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
m5stack_capsule.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
m5stack_capsule.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
m5stack_capsule.menu.PartitionScheme.app5M_fat24M_32MB=32M Flash (4.8MB APP/22MB FATFS)
|
|
m5stack_capsule.menu.PartitionScheme.app5M_fat24M_32MB.build.partitions=large_fat_32MB
|
|
m5stack_capsule.menu.PartitionScheme.app5M_fat24M_32MB.upload.maximum_size=4718592
|
|
m5stack_capsule.menu.PartitionScheme.app5M_little24M_32MB=32M Flash (4.8MB APP/22MB LittleFS)
|
|
m5stack_capsule.menu.PartitionScheme.app5M_little24M_32MB.build.partitions=large_littlefs_32MB
|
|
m5stack_capsule.menu.PartitionScheme.app5M_little24M_32MB.upload.maximum_size=4718592
|
|
m5stack_capsule.menu.PartitionScheme.esp_sr_16=ESP SR 16M (3MB APP/7MB SPIFFS/2.9MB MODEL)
|
|
m5stack_capsule.menu.PartitionScheme.esp_sr_16.upload.maximum_size=3145728
|
|
m5stack_capsule.menu.PartitionScheme.esp_sr_16.upload.extra_flags=0xD10000 {build.path}/srmodels.bin
|
|
m5stack_capsule.menu.PartitionScheme.esp_sr_16.build.partitions=esp_sr_16
|
|
m5stack_capsule.menu.PartitionScheme.custom=Custom
|
|
m5stack_capsule.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_capsule.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_capsule.menu.CPUFreq.240=240MHz (WiFi)
|
|
m5stack_capsule.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_capsule.menu.CPUFreq.160=160MHz (WiFi)
|
|
m5stack_capsule.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_capsule.menu.CPUFreq.80=80MHz (WiFi)
|
|
m5stack_capsule.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_capsule.menu.CPUFreq.40=40MHz
|
|
m5stack_capsule.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_capsule.menu.CPUFreq.20=20MHz
|
|
m5stack_capsule.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_capsule.menu.CPUFreq.10=10MHz
|
|
m5stack_capsule.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
|
|
m5stack_capsule.menu.UploadSpeed.1500000=1500000
|
|
m5stack_capsule.menu.UploadSpeed.1500000.upload.speed=1500000
|
|
m5stack_capsule.menu.UploadSpeed.921600=921600
|
|
m5stack_capsule.menu.UploadSpeed.921600.upload.speed=921600
|
|
m5stack_capsule.menu.UploadSpeed.115200=115200
|
|
m5stack_capsule.menu.UploadSpeed.115200.upload.speed=115200
|
|
m5stack_capsule.menu.UploadSpeed.256000.windows=256000
|
|
m5stack_capsule.menu.UploadSpeed.256000.upload.speed=256000
|
|
m5stack_capsule.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
m5stack_capsule.menu.UploadSpeed.230400=230400
|
|
m5stack_capsule.menu.UploadSpeed.230400.upload.speed=230400
|
|
m5stack_capsule.menu.UploadSpeed.460800.linux=460800
|
|
m5stack_capsule.menu.UploadSpeed.460800.macosx=460800
|
|
m5stack_capsule.menu.UploadSpeed.460800.upload.speed=460800
|
|
m5stack_capsule.menu.UploadSpeed.512000.windows=512000
|
|
m5stack_capsule.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
m5stack_capsule.menu.DebugLevel.none=None
|
|
m5stack_capsule.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_capsule.menu.DebugLevel.error=Error
|
|
m5stack_capsule.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_capsule.menu.DebugLevel.warn=Warn
|
|
m5stack_capsule.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_capsule.menu.DebugLevel.info=Info
|
|
m5stack_capsule.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_capsule.menu.DebugLevel.debug=Debug
|
|
m5stack_capsule.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_capsule.menu.DebugLevel.verbose=Verbose
|
|
m5stack_capsule.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_capsule.menu.EraseFlash.none=Disabled
|
|
m5stack_capsule.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_capsule.menu.EraseFlash.all=Enabled
|
|
m5stack_capsule.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_cardputer.name=M5Cardputer
|
|
m5stack_cardputer.bootloader.tool=esptool_py
|
|
m5stack_cardputer.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_cardputer.upload.tool=esptool_py
|
|
m5stack_cardputer.upload.tool.default=esptool_py
|
|
m5stack_cardputer.upload.tool.network=esp_ota
|
|
|
|
m5stack_cardputer.upload.maximum_size=1310720
|
|
m5stack_cardputer.upload.maximum_data_size=327680
|
|
m5stack_cardputer.upload.flags=
|
|
m5stack_cardputer.upload.extra_flags=
|
|
m5stack_cardputer.upload.use_1200bps_touch=false
|
|
m5stack_cardputer.upload.wait_for_upload_port=false
|
|
|
|
m5stack_cardputer.serial.disableDTR=false
|
|
m5stack_cardputer.serial.disableRTS=false
|
|
|
|
m5stack_cardputer.build.tarch=xtensa
|
|
m5stack_cardputer.build.bootloader_addr=0x0
|
|
m5stack_cardputer.build.target=esp32s3
|
|
m5stack_cardputer.build.mcu=esp32s3
|
|
m5stack_cardputer.build.core=esp32
|
|
m5stack_cardputer.build.variant=m5stack_cardputer
|
|
m5stack_cardputer.build.board=M5STACK_CARDPUTER
|
|
|
|
m5stack_cardputer.build.usb_mode=1
|
|
m5stack_cardputer.build.cdc_on_boot=1
|
|
m5stack_cardputer.build.msc_on_boot=0
|
|
m5stack_cardputer.build.dfu_on_boot=0
|
|
m5stack_cardputer.build.f_cpu=240000000L
|
|
m5stack_cardputer.build.flash_size=8MB
|
|
m5stack_cardputer.build.flash_freq=80m
|
|
m5stack_cardputer.build.flash_mode=dio
|
|
m5stack_cardputer.build.boot=qio
|
|
m5stack_cardputer.build.boot_freq=80m
|
|
m5stack_cardputer.build.partitions=default
|
|
m5stack_cardputer.build.defines=
|
|
m5stack_cardputer.build.loop_core=
|
|
m5stack_cardputer.build.event_core=
|
|
m5stack_cardputer.build.psram_type=qspi
|
|
m5stack_cardputer.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
m5stack_cardputer.menu.JTAGAdapter.default=Disabled
|
|
m5stack_cardputer.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
m5stack_cardputer.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
m5stack_cardputer.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
m5stack_cardputer.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
m5stack_cardputer.menu.JTAGAdapter.external=FTDI Adapter
|
|
m5stack_cardputer.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
m5stack_cardputer.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
m5stack_cardputer.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
m5stack_cardputer.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
m5stack_cardputer.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
m5stack_cardputer.menu.PSRAM.disabled=Disabled
|
|
m5stack_cardputer.menu.PSRAM.disabled.build.defines=
|
|
m5stack_cardputer.menu.PSRAM.disabled.build.psram_type=qspi
|
|
m5stack_cardputer.menu.PSRAM.enabled=QSPI PSRAM
|
|
m5stack_cardputer.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
m5stack_cardputer.menu.PSRAM.enabled.build.psram_type=qspi
|
|
m5stack_cardputer.menu.PSRAM.opi=OPI PSRAM
|
|
m5stack_cardputer.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
m5stack_cardputer.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
m5stack_cardputer.menu.FlashMode.qio=QIO 80MHz
|
|
m5stack_cardputer.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_cardputer.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_cardputer.menu.FlashMode.qio.build.boot_freq=80m
|
|
m5stack_cardputer.menu.FlashMode.qio.build.flash_freq=80m
|
|
m5stack_cardputer.menu.FlashMode.qio120=QIO 120MHz
|
|
m5stack_cardputer.menu.FlashMode.qio120.build.flash_mode=dio
|
|
m5stack_cardputer.menu.FlashMode.qio120.build.boot=qio
|
|
m5stack_cardputer.menu.FlashMode.qio120.build.boot_freq=120m
|
|
m5stack_cardputer.menu.FlashMode.qio120.build.flash_freq=80m
|
|
m5stack_cardputer.menu.FlashMode.dio=DIO 80MHz
|
|
m5stack_cardputer.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_cardputer.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_cardputer.menu.FlashMode.dio.build.boot_freq=80m
|
|
m5stack_cardputer.menu.FlashMode.dio.build.flash_freq=80m
|
|
m5stack_cardputer.menu.FlashMode.opi=OPI 80MHz
|
|
m5stack_cardputer.menu.FlashMode.opi.build.flash_mode=dout
|
|
m5stack_cardputer.menu.FlashMode.opi.build.boot=opi
|
|
m5stack_cardputer.menu.FlashMode.opi.build.boot_freq=80m
|
|
m5stack_cardputer.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
m5stack_cardputer.menu.FlashSize.4M=4MB (32Mb)
|
|
m5stack_cardputer.menu.FlashSize.4M.build.flash_size=4MB
|
|
m5stack_cardputer.menu.FlashSize.8M=8MB (64Mb)
|
|
m5stack_cardputer.menu.FlashSize.8M.build.flash_size=8MB
|
|
m5stack_cardputer.menu.FlashSize.8M.build.partitions=default_8MB
|
|
m5stack_cardputer.menu.FlashSize.16M=16MB (128Mb)
|
|
m5stack_cardputer.menu.FlashSize.16M.build.flash_size=16MB
|
|
m5stack_cardputer.menu.FlashSize.32M=32MB (256Mb)
|
|
m5stack_cardputer.menu.FlashSize.32M.build.flash_size=32MB
|
|
m5stack_cardputer.menu.FlashSize.32M.build.partitions=app5M_fat24M_32MB
|
|
|
|
m5stack_cardputer.menu.LoopCore.1=Core 1
|
|
m5stack_cardputer.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_cardputer.menu.LoopCore.0=Core 0
|
|
m5stack_cardputer.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_cardputer.menu.EventsCore.1=Core 1
|
|
m5stack_cardputer.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_cardputer.menu.EventsCore.0=Core 0
|
|
m5stack_cardputer.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_cardputer.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
m5stack_cardputer.menu.USBMode.hwcdc.build.usb_mode=1
|
|
m5stack_cardputer.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
m5stack_cardputer.menu.USBMode.default.build.usb_mode=0
|
|
|
|
m5stack_cardputer.menu.CDCOnBoot.cdc=Enabled
|
|
m5stack_cardputer.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
m5stack_cardputer.menu.CDCOnBoot.default=Disabled
|
|
m5stack_cardputer.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
m5stack_cardputer.menu.MSCOnBoot.default=Disabled
|
|
m5stack_cardputer.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
m5stack_cardputer.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
m5stack_cardputer.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
m5stack_cardputer.menu.DFUOnBoot.default=Disabled
|
|
m5stack_cardputer.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
m5stack_cardputer.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
m5stack_cardputer.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
m5stack_cardputer.menu.UploadMode.default=UART0 / Hardware CDC
|
|
m5stack_cardputer.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
m5stack_cardputer.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
m5stack_cardputer.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
m5stack_cardputer.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
m5stack_cardputer.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
m5stack_cardputer.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_cardputer.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_cardputer.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_cardputer.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_cardputer.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_cardputer.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_cardputer.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_cardputer.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_cardputer.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_cardputer.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_cardputer.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_cardputer.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_cardputer.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_cardputer.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_cardputer.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_cardputer.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_cardputer.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_cardputer.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_cardputer.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_cardputer.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_cardputer.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_cardputer.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_cardputer.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_cardputer.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_cardputer.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_cardputer.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_cardputer.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_cardputer.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_cardputer.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_cardputer.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_cardputer.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
m5stack_cardputer.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
m5stack_cardputer.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
m5stack_cardputer.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_cardputer.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_cardputer.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_cardputer.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_cardputer.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_cardputer.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_cardputer.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
m5stack_cardputer.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
m5stack_cardputer.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
m5stack_cardputer.menu.PartitionScheme.app5M_fat24M_32MB=32M Flash (4.8MB APP/22MB FATFS)
|
|
m5stack_cardputer.menu.PartitionScheme.app5M_fat24M_32MB.build.partitions=large_fat_32MB
|
|
m5stack_cardputer.menu.PartitionScheme.app5M_fat24M_32MB.upload.maximum_size=4718592
|
|
m5stack_cardputer.menu.PartitionScheme.app5M_little24M_32MB=32M Flash (4.8MB APP/22MB LittleFS)
|
|
m5stack_cardputer.menu.PartitionScheme.app5M_little24M_32MB.build.partitions=large_littlefs_32MB
|
|
m5stack_cardputer.menu.PartitionScheme.app5M_little24M_32MB.upload.maximum_size=4718592
|
|
m5stack_cardputer.menu.PartitionScheme.esp_sr_16=ESP SR 16M (3MB APP/7MB SPIFFS/2.9MB MODEL)
|
|
m5stack_cardputer.menu.PartitionScheme.esp_sr_16.upload.maximum_size=3145728
|
|
m5stack_cardputer.menu.PartitionScheme.esp_sr_16.upload.extra_flags=0xD10000 {build.path}/srmodels.bin
|
|
m5stack_cardputer.menu.PartitionScheme.esp_sr_16.build.partitions=esp_sr_16
|
|
m5stack_cardputer.menu.PartitionScheme.custom=Custom
|
|
m5stack_cardputer.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_cardputer.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_cardputer.menu.CPUFreq.240=240MHz (WiFi)
|
|
m5stack_cardputer.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_cardputer.menu.CPUFreq.160=160MHz (WiFi)
|
|
m5stack_cardputer.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_cardputer.menu.CPUFreq.80=80MHz (WiFi)
|
|
m5stack_cardputer.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_cardputer.menu.CPUFreq.40=40MHz
|
|
m5stack_cardputer.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_cardputer.menu.CPUFreq.20=20MHz
|
|
m5stack_cardputer.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_cardputer.menu.CPUFreq.10=10MHz
|
|
m5stack_cardputer.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_cardputer.menu.UploadSpeed.921600=921600
|
|
m5stack_cardputer.menu.UploadSpeed.921600.upload.speed=921600
|
|
m5stack_cardputer.menu.UploadSpeed.115200=115200
|
|
m5stack_cardputer.menu.UploadSpeed.115200.upload.speed=115200
|
|
m5stack_cardputer.menu.UploadSpeed.256000.windows=256000
|
|
m5stack_cardputer.menu.UploadSpeed.256000.upload.speed=256000
|
|
m5stack_cardputer.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
m5stack_cardputer.menu.UploadSpeed.230400=230400
|
|
m5stack_cardputer.menu.UploadSpeed.230400.upload.speed=230400
|
|
m5stack_cardputer.menu.UploadSpeed.460800.linux=460800
|
|
m5stack_cardputer.menu.UploadSpeed.460800.macosx=460800
|
|
m5stack_cardputer.menu.UploadSpeed.460800.upload.speed=460800
|
|
m5stack_cardputer.menu.UploadSpeed.512000.windows=512000
|
|
m5stack_cardputer.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
m5stack_cardputer.menu.DebugLevel.none=None
|
|
m5stack_cardputer.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_cardputer.menu.DebugLevel.error=Error
|
|
m5stack_cardputer.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_cardputer.menu.DebugLevel.warn=Warn
|
|
m5stack_cardputer.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_cardputer.menu.DebugLevel.info=Info
|
|
m5stack_cardputer.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_cardputer.menu.DebugLevel.debug=Debug
|
|
m5stack_cardputer.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_cardputer.menu.DebugLevel.verbose=Verbose
|
|
m5stack_cardputer.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_cardputer.menu.EraseFlash.none=Disabled
|
|
m5stack_cardputer.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_cardputer.menu.EraseFlash.all=Enabled
|
|
m5stack_cardputer.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_dial.name=M5Dial
|
|
m5stack_dial.bootloader.tool=esptool_py
|
|
m5stack_dial.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_dial.upload.tool=esptool_py
|
|
m5stack_dial.upload.tool.default=esptool_py
|
|
m5stack_dial.upload.tool.network=esp_ota
|
|
|
|
m5stack_dial.upload.maximum_size=1310720
|
|
m5stack_dial.upload.maximum_data_size=327680
|
|
m5stack_dial.upload.flags=
|
|
m5stack_dial.upload.extra_flags=
|
|
m5stack_dial.upload.use_1200bps_touch=false
|
|
m5stack_dial.upload.wait_for_upload_port=false
|
|
|
|
m5stack_dial.serial.disableDTR=false
|
|
m5stack_dial.serial.disableRTS=false
|
|
|
|
m5stack_dial.build.tarch=xtensa
|
|
m5stack_dial.build.bootloader_addr=0x0
|
|
m5stack_dial.build.target=esp32s3
|
|
m5stack_dial.build.mcu=esp32s3
|
|
m5stack_dial.build.core=esp32
|
|
m5stack_dial.build.variant=m5stack_dial
|
|
m5stack_dial.build.board=M5STACK_DIAL
|
|
|
|
m5stack_dial.build.usb_mode=1
|
|
m5stack_dial.build.cdc_on_boot=1
|
|
m5stack_dial.build.msc_on_boot=0
|
|
m5stack_dial.build.dfu_on_boot=0
|
|
m5stack_dial.build.f_cpu=240000000L
|
|
m5stack_dial.build.flash_size=8MB
|
|
m5stack_dial.build.flash_freq=80m
|
|
m5stack_dial.build.flash_mode=dio
|
|
m5stack_dial.build.boot=qio
|
|
m5stack_dial.build.boot_freq=80m
|
|
m5stack_dial.build.partitions=default_8MB
|
|
m5stack_dial.build.defines=
|
|
m5stack_dial.build.loop_core=
|
|
m5stack_dial.build.event_core=
|
|
m5stack_dial.build.psram_type=qspi
|
|
m5stack_dial.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
m5stack_dial.menu.JTAGAdapter.default=Disabled
|
|
m5stack_dial.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
m5stack_dial.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
m5stack_dial.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
m5stack_dial.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
m5stack_dial.menu.JTAGAdapter.external=FTDI Adapter
|
|
m5stack_dial.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
m5stack_dial.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
m5stack_dial.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
m5stack_dial.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
m5stack_dial.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
m5stack_dial.menu.PSRAM.disabled=Disabled
|
|
m5stack_dial.menu.PSRAM.disabled.build.defines=
|
|
m5stack_dial.menu.PSRAM.disabled.build.psram_type=qspi
|
|
m5stack_dial.menu.PSRAM.enabled=QSPI PSRAM
|
|
m5stack_dial.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
m5stack_dial.menu.PSRAM.enabled.build.psram_type=qspi
|
|
m5stack_dial.menu.PSRAM.opi=OPI PSRAM
|
|
m5stack_dial.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
m5stack_dial.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
m5stack_dial.menu.FlashMode.qio=QIO 80MHz
|
|
m5stack_dial.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_dial.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_dial.menu.FlashMode.qio.build.boot_freq=80m
|
|
m5stack_dial.menu.FlashMode.qio.build.flash_freq=80m
|
|
m5stack_dial.menu.FlashMode.qio120=QIO 120MHz
|
|
m5stack_dial.menu.FlashMode.qio120.build.flash_mode=dio
|
|
m5stack_dial.menu.FlashMode.qio120.build.boot=qio
|
|
m5stack_dial.menu.FlashMode.qio120.build.boot_freq=120m
|
|
m5stack_dial.menu.FlashMode.qio120.build.flash_freq=80m
|
|
m5stack_dial.menu.FlashMode.dio=DIO 80MHz
|
|
m5stack_dial.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_dial.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_dial.menu.FlashMode.dio.build.boot_freq=80m
|
|
m5stack_dial.menu.FlashMode.dio.build.flash_freq=80m
|
|
m5stack_dial.menu.FlashMode.opi=OPI 80MHz
|
|
m5stack_dial.menu.FlashMode.opi.build.flash_mode=dout
|
|
m5stack_dial.menu.FlashMode.opi.build.boot=opi
|
|
m5stack_dial.menu.FlashMode.opi.build.boot_freq=80m
|
|
m5stack_dial.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
m5stack_dial.menu.FlashSize.4M=4MB (32Mb)
|
|
m5stack_dial.menu.FlashSize.4M.build.flash_size=4MB
|
|
m5stack_dial.menu.FlashSize.8M=8MB (64Mb)
|
|
m5stack_dial.menu.FlashSize.8M.build.flash_size=8MB
|
|
m5stack_dial.menu.FlashSize.8M.build.partitions=default_8MB
|
|
m5stack_dial.menu.FlashSize.16M=16MB (128Mb)
|
|
m5stack_dial.menu.FlashSize.16M.build.flash_size=16MB
|
|
m5stack_dial.menu.FlashSize.32M=32MB (256Mb)
|
|
m5stack_dial.menu.FlashSize.32M.build.flash_size=32MB
|
|
m5stack_dial.menu.FlashSize.32M.build.partitions=app5M_fat24M_32MB
|
|
|
|
m5stack_dial.menu.LoopCore.1=Core 1
|
|
m5stack_dial.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_dial.menu.LoopCore.0=Core 0
|
|
m5stack_dial.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_dial.menu.EventsCore.1=Core 1
|
|
m5stack_dial.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_dial.menu.EventsCore.0=Core 0
|
|
m5stack_dial.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_dial.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
m5stack_dial.menu.USBMode.hwcdc.build.usb_mode=1
|
|
m5stack_dial.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
m5stack_dial.menu.USBMode.default.build.usb_mode=0
|
|
|
|
m5stack_dial.menu.CDCOnBoot.cdc=Enabled
|
|
m5stack_dial.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
m5stack_dial.menu.CDCOnBoot.default=Disabled
|
|
m5stack_dial.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
m5stack_dial.menu.MSCOnBoot.default=Disabled
|
|
m5stack_dial.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
m5stack_dial.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
m5stack_dial.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
m5stack_dial.menu.DFUOnBoot.default=Disabled
|
|
m5stack_dial.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
m5stack_dial.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
m5stack_dial.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
m5stack_dial.menu.UploadMode.default=UART0 / Hardware CDC
|
|
m5stack_dial.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
m5stack_dial.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
m5stack_dial.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
m5stack_dial.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
m5stack_dial.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
m5stack_dial.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_dial.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_dial.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_dial.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_dial.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_dial.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_dial.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_dial.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_dial.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_dial.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_dial.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_dial.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_dial.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_dial.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_dial.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_dial.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_dial.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_dial.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_dial.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_dial.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_dial.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_dial.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_dial.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_dial.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_dial.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_dial.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_dial.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_dial.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_dial.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_dial.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_dial.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
m5stack_dial.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
m5stack_dial.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
m5stack_dial.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_dial.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_dial.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_dial.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_dial.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_dial.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_dial.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
m5stack_dial.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
m5stack_dial.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
m5stack_dial.menu.PartitionScheme.app5M_fat24M_32MB=32M Flash (4.8MB APP/22MB FATFS)
|
|
m5stack_dial.menu.PartitionScheme.app5M_fat24M_32MB.build.partitions=large_fat_32MB
|
|
m5stack_dial.menu.PartitionScheme.app5M_fat24M_32MB.upload.maximum_size=4718592
|
|
m5stack_dial.menu.PartitionScheme.app5M_little24M_32MB=32M Flash (4.8MB APP/22MB LittleFS)
|
|
m5stack_dial.menu.PartitionScheme.app5M_little24M_32MB.build.partitions=large_littlefs_32MB
|
|
m5stack_dial.menu.PartitionScheme.app5M_little24M_32MB.upload.maximum_size=4718592
|
|
m5stack_dial.menu.PartitionScheme.esp_sr_16=ESP SR 16M (3MB APP/7MB SPIFFS/2.9MB MODEL)
|
|
m5stack_dial.menu.PartitionScheme.esp_sr_16.upload.maximum_size=3145728
|
|
m5stack_dial.menu.PartitionScheme.esp_sr_16.upload.extra_flags=0xD10000 {build.path}/srmodels.bin
|
|
m5stack_dial.menu.PartitionScheme.esp_sr_16.build.partitions=esp_sr_16
|
|
m5stack_dial.menu.PartitionScheme.custom=Custom
|
|
m5stack_dial.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_dial.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_dial.menu.CPUFreq.240=240MHz (WiFi)
|
|
m5stack_dial.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_dial.menu.CPUFreq.160=160MHz (WiFi)
|
|
m5stack_dial.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_dial.menu.CPUFreq.80=80MHz (WiFi)
|
|
m5stack_dial.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_dial.menu.CPUFreq.40=40MHz
|
|
m5stack_dial.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_dial.menu.CPUFreq.20=20MHz
|
|
m5stack_dial.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_dial.menu.CPUFreq.10=10MHz
|
|
m5stack_dial.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_dial.menu.UploadSpeed.921600=921600
|
|
m5stack_dial.menu.UploadSpeed.921600.upload.speed=921600
|
|
m5stack_dial.menu.UploadSpeed.115200=115200
|
|
m5stack_dial.menu.UploadSpeed.115200.upload.speed=115200
|
|
m5stack_dial.menu.UploadSpeed.256000.windows=256000
|
|
m5stack_dial.menu.UploadSpeed.256000.upload.speed=256000
|
|
m5stack_dial.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
m5stack_dial.menu.UploadSpeed.230400=230400
|
|
m5stack_dial.menu.UploadSpeed.230400.upload.speed=230400
|
|
m5stack_dial.menu.UploadSpeed.460800.linux=460800
|
|
m5stack_dial.menu.UploadSpeed.460800.macosx=460800
|
|
m5stack_dial.menu.UploadSpeed.460800.upload.speed=460800
|
|
m5stack_dial.menu.UploadSpeed.512000.windows=512000
|
|
m5stack_dial.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
m5stack_dial.menu.DebugLevel.none=None
|
|
m5stack_dial.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_dial.menu.DebugLevel.error=Error
|
|
m5stack_dial.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_dial.menu.DebugLevel.warn=Warn
|
|
m5stack_dial.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_dial.menu.DebugLevel.info=Info
|
|
m5stack_dial.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_dial.menu.DebugLevel.debug=Debug
|
|
m5stack_dial.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_dial.menu.DebugLevel.verbose=Verbose
|
|
m5stack_dial.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_dial.menu.EraseFlash.none=Disabled
|
|
m5stack_dial.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_dial.menu.EraseFlash.all=Enabled
|
|
m5stack_dial.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_dinmeter.name=M5DinMeter
|
|
m5stack_dinmeter.bootloader.tool=esptool_py
|
|
m5stack_dinmeter.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_dinmeter.upload.tool=esptool_py
|
|
m5stack_dinmeter.upload.tool.default=esptool_py
|
|
m5stack_dinmeter.upload.tool.network=esp_ota
|
|
|
|
m5stack_dinmeter.upload.maximum_size=1310720
|
|
m5stack_dinmeter.upload.maximum_data_size=327680
|
|
m5stack_dinmeter.upload.flags=
|
|
m5stack_dinmeter.upload.extra_flags=
|
|
m5stack_dinmeter.upload.use_1200bps_touch=false
|
|
m5stack_dinmeter.upload.wait_for_upload_port=false
|
|
|
|
m5stack_dinmeter.serial.disableDTR=false
|
|
m5stack_dinmeter.serial.disableRTS=false
|
|
|
|
m5stack_dinmeter.build.tarch=xtensa
|
|
m5stack_dinmeter.build.bootloader_addr=0x0
|
|
m5stack_dinmeter.build.target=esp32s3
|
|
m5stack_dinmeter.build.mcu=esp32s3
|
|
m5stack_dinmeter.build.core=esp32
|
|
m5stack_dinmeter.build.variant=m5stack_dinmeter
|
|
m5stack_dinmeter.build.board=M5STACK_DINMETER
|
|
|
|
m5stack_dinmeter.build.usb_mode=1
|
|
m5stack_dinmeter.build.cdc_on_boot=1
|
|
m5stack_dinmeter.build.msc_on_boot=0
|
|
m5stack_dinmeter.build.dfu_on_boot=0
|
|
m5stack_dinmeter.build.f_cpu=240000000L
|
|
m5stack_dinmeter.build.flash_size=8MB
|
|
m5stack_dinmeter.build.flash_freq=80m
|
|
m5stack_dinmeter.build.flash_mode=dio
|
|
m5stack_dinmeter.build.boot=qio
|
|
m5stack_dinmeter.build.boot_freq=80m
|
|
m5stack_dinmeter.build.partitions=default
|
|
m5stack_dinmeter.build.defines=
|
|
m5stack_dinmeter.build.loop_core=
|
|
m5stack_dinmeter.build.event_core=
|
|
m5stack_dinmeter.build.psram_type=qspi
|
|
m5stack_dinmeter.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
m5stack_dinmeter.menu.JTAGAdapter.default=Disabled
|
|
m5stack_dinmeter.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
m5stack_dinmeter.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
m5stack_dinmeter.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
m5stack_dinmeter.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
m5stack_dinmeter.menu.JTAGAdapter.external=FTDI Adapter
|
|
m5stack_dinmeter.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
m5stack_dinmeter.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
m5stack_dinmeter.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
m5stack_dinmeter.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
m5stack_dinmeter.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
m5stack_dinmeter.menu.PSRAM.disabled=Disabled
|
|
m5stack_dinmeter.menu.PSRAM.disabled.build.defines=
|
|
m5stack_dinmeter.menu.PSRAM.disabled.build.psram_type=qspi
|
|
m5stack_dinmeter.menu.PSRAM.enabled=QSPI PSRAM
|
|
m5stack_dinmeter.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
m5stack_dinmeter.menu.PSRAM.enabled.build.psram_type=qspi
|
|
m5stack_dinmeter.menu.PSRAM.opi=OPI PSRAM
|
|
m5stack_dinmeter.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
m5stack_dinmeter.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
m5stack_dinmeter.menu.FlashMode.qio=QIO 80MHz
|
|
m5stack_dinmeter.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_dinmeter.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_dinmeter.menu.FlashMode.qio.build.boot_freq=80m
|
|
m5stack_dinmeter.menu.FlashMode.qio.build.flash_freq=80m
|
|
m5stack_dinmeter.menu.FlashMode.qio120=QIO 120MHz
|
|
m5stack_dinmeter.menu.FlashMode.qio120.build.flash_mode=dio
|
|
m5stack_dinmeter.menu.FlashMode.qio120.build.boot=qio
|
|
m5stack_dinmeter.menu.FlashMode.qio120.build.boot_freq=120m
|
|
m5stack_dinmeter.menu.FlashMode.qio120.build.flash_freq=80m
|
|
m5stack_dinmeter.menu.FlashMode.dio=DIO 80MHz
|
|
m5stack_dinmeter.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_dinmeter.menu.FlashMode.dio.build.boot=dio
|
|
m5stack_dinmeter.menu.FlashMode.dio.build.boot_freq=80m
|
|
m5stack_dinmeter.menu.FlashMode.dio.build.flash_freq=80m
|
|
m5stack_dinmeter.menu.FlashMode.opi=OPI 80MHz
|
|
m5stack_dinmeter.menu.FlashMode.opi.build.flash_mode=dout
|
|
m5stack_dinmeter.menu.FlashMode.opi.build.boot=opi
|
|
m5stack_dinmeter.menu.FlashMode.opi.build.boot_freq=80m
|
|
m5stack_dinmeter.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
m5stack_dinmeter.menu.FlashSize.4M=4MB (32Mb)
|
|
m5stack_dinmeter.menu.FlashSize.4M.build.flash_size=4MB
|
|
m5stack_dinmeter.menu.FlashSize.8M=8MB (64Mb)
|
|
m5stack_dinmeter.menu.FlashSize.8M.build.flash_size=8MB
|
|
m5stack_dinmeter.menu.FlashSize.8M.build.partitions=default_8MB
|
|
m5stack_dinmeter.menu.FlashSize.16M=16MB (128Mb)
|
|
m5stack_dinmeter.menu.FlashSize.16M.build.flash_size=16MB
|
|
m5stack_dinmeter.menu.FlashSize.32M=32MB (256Mb)
|
|
m5stack_dinmeter.menu.FlashSize.32M.build.flash_size=32MB
|
|
m5stack_dinmeter.menu.FlashSize.32M.build.partitions=app5M_fat24M_32MB
|
|
|
|
m5stack_dinmeter.menu.LoopCore.1=Core 1
|
|
m5stack_dinmeter.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
m5stack_dinmeter.menu.LoopCore.0=Core 0
|
|
m5stack_dinmeter.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
m5stack_dinmeter.menu.EventsCore.1=Core 1
|
|
m5stack_dinmeter.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
m5stack_dinmeter.menu.EventsCore.0=Core 0
|
|
m5stack_dinmeter.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
m5stack_dinmeter.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
m5stack_dinmeter.menu.USBMode.hwcdc.build.usb_mode=1
|
|
m5stack_dinmeter.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
m5stack_dinmeter.menu.USBMode.default.build.usb_mode=0
|
|
|
|
m5stack_dinmeter.menu.CDCOnBoot.cdc=Enabled
|
|
m5stack_dinmeter.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
m5stack_dinmeter.menu.CDCOnBoot.default=Disabled
|
|
m5stack_dinmeter.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
m5stack_dinmeter.menu.MSCOnBoot.default=Disabled
|
|
m5stack_dinmeter.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
m5stack_dinmeter.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
m5stack_dinmeter.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
m5stack_dinmeter.menu.DFUOnBoot.default=Disabled
|
|
m5stack_dinmeter.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
m5stack_dinmeter.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
m5stack_dinmeter.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
m5stack_dinmeter.menu.UploadMode.default=UART0 / Hardware CDC
|
|
m5stack_dinmeter.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
m5stack_dinmeter.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
m5stack_dinmeter.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
m5stack_dinmeter.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
m5stack_dinmeter.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
m5stack_dinmeter.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_dinmeter.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_dinmeter.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_dinmeter.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_dinmeter.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
m5stack_dinmeter.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
m5stack_dinmeter.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
m5stack_dinmeter.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
m5stack_dinmeter.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
m5stack_dinmeter.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_dinmeter.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_dinmeter.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_dinmeter.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_dinmeter.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_dinmeter.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_dinmeter.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_dinmeter.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_dinmeter.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_dinmeter.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_dinmeter.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_dinmeter.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_dinmeter.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_dinmeter.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_dinmeter.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_dinmeter.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
m5stack_dinmeter.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
m5stack_dinmeter.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
m5stack_dinmeter.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
m5stack_dinmeter.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
m5stack_dinmeter.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
m5stack_dinmeter.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
m5stack_dinmeter.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
m5stack_dinmeter.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
m5stack_dinmeter.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
m5stack_dinmeter.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
m5stack_dinmeter.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
m5stack_dinmeter.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
m5stack_dinmeter.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
m5stack_dinmeter.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
m5stack_dinmeter.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
m5stack_dinmeter.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
m5stack_dinmeter.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
m5stack_dinmeter.menu.PartitionScheme.app5M_fat24M_32MB=32M Flash (4.8MB APP/22MB FATFS)
|
|
m5stack_dinmeter.menu.PartitionScheme.app5M_fat24M_32MB.build.partitions=large_fat_32MB
|
|
m5stack_dinmeter.menu.PartitionScheme.app5M_fat24M_32MB.upload.maximum_size=4718592
|
|
m5stack_dinmeter.menu.PartitionScheme.app5M_little24M_32MB=32M Flash (4.8MB APP/22MB LittleFS)
|
|
m5stack_dinmeter.menu.PartitionScheme.app5M_little24M_32MB.build.partitions=large_littlefs_32MB
|
|
m5stack_dinmeter.menu.PartitionScheme.app5M_little24M_32MB.upload.maximum_size=4718592
|
|
m5stack_dinmeter.menu.PartitionScheme.esp_sr_16=ESP SR 16M (3MB APP/7MB SPIFFS/2.9MB MODEL)
|
|
m5stack_dinmeter.menu.PartitionScheme.esp_sr_16.upload.maximum_size=3145728
|
|
m5stack_dinmeter.menu.PartitionScheme.esp_sr_16.upload.extra_flags=0xD10000 {build.path}/srmodels.bin
|
|
m5stack_dinmeter.menu.PartitionScheme.esp_sr_16.build.partitions=esp_sr_16
|
|
m5stack_dinmeter.menu.PartitionScheme.custom=Custom
|
|
m5stack_dinmeter.menu.PartitionScheme.custom.build.partitions=
|
|
m5stack_dinmeter.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
m5stack_dinmeter.menu.CPUFreq.240=240MHz (WiFi)
|
|
m5stack_dinmeter.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
m5stack_dinmeter.menu.CPUFreq.160=160MHz (WiFi)
|
|
m5stack_dinmeter.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_dinmeter.menu.CPUFreq.80=80MHz (WiFi)
|
|
m5stack_dinmeter.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_dinmeter.menu.CPUFreq.40=40MHz
|
|
m5stack_dinmeter.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_dinmeter.menu.CPUFreq.20=20MHz
|
|
m5stack_dinmeter.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_dinmeter.menu.CPUFreq.10=10MHz
|
|
m5stack_dinmeter.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_dinmeter.menu.UploadSpeed.921600=921600
|
|
m5stack_dinmeter.menu.UploadSpeed.921600.upload.speed=921600
|
|
m5stack_dinmeter.menu.UploadSpeed.115200=115200
|
|
m5stack_dinmeter.menu.UploadSpeed.115200.upload.speed=115200
|
|
m5stack_dinmeter.menu.UploadSpeed.256000.windows=256000
|
|
m5stack_dinmeter.menu.UploadSpeed.256000.upload.speed=256000
|
|
m5stack_dinmeter.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
m5stack_dinmeter.menu.UploadSpeed.230400=230400
|
|
m5stack_dinmeter.menu.UploadSpeed.230400.upload.speed=230400
|
|
m5stack_dinmeter.menu.UploadSpeed.460800.linux=460800
|
|
m5stack_dinmeter.menu.UploadSpeed.460800.macosx=460800
|
|
m5stack_dinmeter.menu.UploadSpeed.460800.upload.speed=460800
|
|
m5stack_dinmeter.menu.UploadSpeed.512000.windows=512000
|
|
m5stack_dinmeter.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
m5stack_dinmeter.menu.DebugLevel.none=None
|
|
m5stack_dinmeter.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_dinmeter.menu.DebugLevel.error=Error
|
|
m5stack_dinmeter.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_dinmeter.menu.DebugLevel.warn=Warn
|
|
m5stack_dinmeter.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_dinmeter.menu.DebugLevel.info=Info
|
|
m5stack_dinmeter.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_dinmeter.menu.DebugLevel.debug=Debug
|
|
m5stack_dinmeter.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_dinmeter.menu.DebugLevel.verbose=Verbose
|
|
m5stack_dinmeter.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_dinmeter.menu.EraseFlash.none=Disabled
|
|
m5stack_dinmeter.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_dinmeter.menu.EraseFlash.all=Enabled
|
|
m5stack_dinmeter.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
m5stack_nanoc6.name=M5NanoC6
|
|
|
|
m5stack_nanoc6.bootloader.tool=esptool_py
|
|
m5stack_nanoc6.bootloader.tool.default=esptool_py
|
|
|
|
m5stack_nanoc6.upload.tool=esptool_py
|
|
m5stack_nanoc6.upload.tool.default=esptool_py
|
|
m5stack_nanoc6.upload.tool.network=esp_ota
|
|
|
|
m5stack_nanoc6.upload.maximum_size=1310720
|
|
m5stack_nanoc6.upload.maximum_data_size=327680
|
|
m5stack_nanoc6.upload.flags=
|
|
m5stack_nanoc6.upload.extra_flags=
|
|
m5stack_nanoc6.upload.use_1200bps_touch=false
|
|
m5stack_nanoc6.upload.wait_for_upload_port=false
|
|
|
|
m5stack_nanoc6.serial.disableDTR=false
|
|
m5stack_nanoc6.serial.disableRTS=false
|
|
|
|
m5stack_nanoc6.build.tarch=riscv32
|
|
m5stack_nanoc6.build.target=esp
|
|
m5stack_nanoc6.build.mcu=esp32c6
|
|
m5stack_nanoc6.build.core=esp32
|
|
m5stack_nanoc6.build.variant=m5stack_nanoc6
|
|
m5stack_nanoc6.build.board=M5STACK_NANOC6
|
|
m5stack_nanoc6.build.bootloader_addr=0x0
|
|
|
|
m5stack_nanoc6.build.cdc_on_boot=1
|
|
m5stack_nanoc6.build.f_cpu=160000000L
|
|
m5stack_nanoc6.build.flash_size=4MB
|
|
m5stack_nanoc6.build.flash_freq=80m
|
|
m5stack_nanoc6.build.flash_mode=qio
|
|
m5stack_nanoc6.build.boot=qio
|
|
m5stack_nanoc6.build.partitions=default
|
|
m5stack_nanoc6.build.defines=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
m5stack_nanoc6.menu.JTAGAdapter.default=Disabled
|
|
m5stack_nanoc6.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
m5stack_nanoc6.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
m5stack_nanoc6.menu.JTAGAdapter.builtin.build.openocdscript=esp32c6-builtin.cfg
|
|
m5stack_nanoc6.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
m5stack_nanoc6.menu.JTAGAdapter.external=FTDI Adapter
|
|
m5stack_nanoc6.menu.JTAGAdapter.external.build.openocdscript=esp32c6-ftdi.cfg
|
|
m5stack_nanoc6.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
m5stack_nanoc6.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
m5stack_nanoc6.menu.JTAGAdapter.bridge.build.openocdscript=esp32c6-bridge.cfg
|
|
m5stack_nanoc6.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
m5stack_nanoc6.menu.CDCOnBoot.cdc=Enabled
|
|
m5stack_nanoc6.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
m5stack_nanoc6.menu.CDCOnBoot.default=Enabled
|
|
m5stack_nanoc6.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
|
|
m5stack_nanoc6.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
m5stack_nanoc6.menu.PartitionScheme.default.build.partitions=default
|
|
m5stack_nanoc6.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
m5stack_nanoc6.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
m5stack_nanoc6.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
m5stack_nanoc6.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
m5stack_nanoc6.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
m5stack_nanoc6.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
m5stack_nanoc6.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
m5stack_nanoc6.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
m5stack_nanoc6.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
m5stack_nanoc6.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
m5stack_nanoc6.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
m5stack_nanoc6.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
m5stack_nanoc6.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
m5stack_nanoc6.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
m5stack_nanoc6.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
m5stack_nanoc6.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
m5stack_nanoc6.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
m5stack_nanoc6.menu.PartitionScheme.zigbee=Zigbee 4MB with spiffs
|
|
m5stack_nanoc6.menu.PartitionScheme.zigbee.build.partitions=zigbee
|
|
m5stack_nanoc6.menu.PartitionScheme.zigbee.upload.maximum_size=1310720
|
|
m5stack_nanoc6.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
m5stack_nanoc6.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
m5stack_nanoc6.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
|
|
m5stack_nanoc6.menu.CPUFreq.160=160MHz (WiFi)
|
|
m5stack_nanoc6.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
m5stack_nanoc6.menu.CPUFreq.80=80MHz (WiFi)
|
|
m5stack_nanoc6.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
m5stack_nanoc6.menu.CPUFreq.40=40MHz
|
|
m5stack_nanoc6.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
m5stack_nanoc6.menu.CPUFreq.20=20MHz
|
|
m5stack_nanoc6.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
m5stack_nanoc6.menu.CPUFreq.10=10MHz
|
|
m5stack_nanoc6.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
m5stack_nanoc6.menu.FlashMode.qio=QIO
|
|
m5stack_nanoc6.menu.FlashMode.qio.build.flash_mode=dio
|
|
m5stack_nanoc6.menu.FlashMode.qio.build.boot=qio
|
|
m5stack_nanoc6.menu.FlashMode.dio=DIO
|
|
m5stack_nanoc6.menu.FlashMode.dio.build.flash_mode=dio
|
|
m5stack_nanoc6.menu.FlashMode.dio.build.boot=dio
|
|
|
|
m5stack_nanoc6.menu.FlashFreq.80=80MHz
|
|
m5stack_nanoc6.menu.FlashFreq.80.build.flash_freq=80m
|
|
m5stack_nanoc6.menu.FlashFreq.40=40MHz
|
|
m5stack_nanoc6.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
m5stack_nanoc6.menu.FlashSize.4M=4MB (32Mb)
|
|
m5stack_nanoc6.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
m5stack_nanoc6.menu.UploadSpeed.921600=921600
|
|
m5stack_nanoc6.menu.UploadSpeed.921600.upload.speed=921600
|
|
m5stack_nanoc6.menu.UploadSpeed.115200=115200
|
|
m5stack_nanoc6.menu.UploadSpeed.115200.upload.speed=115200
|
|
m5stack_nanoc6.menu.UploadSpeed.256000.windows=256000
|
|
m5stack_nanoc6.menu.UploadSpeed.256000.upload.speed=256000
|
|
m5stack_nanoc6.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
m5stack_nanoc6.menu.UploadSpeed.230400=230400
|
|
m5stack_nanoc6.menu.UploadSpeed.230400.upload.speed=230400
|
|
m5stack_nanoc6.menu.UploadSpeed.460800.linux=460800
|
|
m5stack_nanoc6.menu.UploadSpeed.460800.macosx=460800
|
|
m5stack_nanoc6.menu.UploadSpeed.460800.upload.speed=460800
|
|
m5stack_nanoc6.menu.UploadSpeed.512000.windows=512000
|
|
m5stack_nanoc6.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
m5stack_nanoc6.menu.DebugLevel.none=None
|
|
m5stack_nanoc6.menu.DebugLevel.none.build.code_debug=0
|
|
m5stack_nanoc6.menu.DebugLevel.error=Error
|
|
m5stack_nanoc6.menu.DebugLevel.error.build.code_debug=1
|
|
m5stack_nanoc6.menu.DebugLevel.warn=Warn
|
|
m5stack_nanoc6.menu.DebugLevel.warn.build.code_debug=2
|
|
m5stack_nanoc6.menu.DebugLevel.info=Info
|
|
m5stack_nanoc6.menu.DebugLevel.info.build.code_debug=3
|
|
m5stack_nanoc6.menu.DebugLevel.debug=Debug
|
|
m5stack_nanoc6.menu.DebugLevel.debug.build.code_debug=4
|
|
m5stack_nanoc6.menu.DebugLevel.verbose=Verbose
|
|
m5stack_nanoc6.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
m5stack_nanoc6.menu.EraseFlash.none=Disabled
|
|
m5stack_nanoc6.menu.EraseFlash.none.upload.erase_cmd=
|
|
m5stack_nanoc6.menu.EraseFlash.all=Enabled
|
|
m5stack_nanoc6.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
m5stack_nanoc6.menu.ZigbeeMode.default=Disabled
|
|
m5stack_nanoc6.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
m5stack_nanoc6.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
m5stack_nanoc6.menu.ZigbeeMode.ed=Zigbee ED (end device)
|
|
m5stack_nanoc6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
|
|
m5stack_nanoc6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
|
|
m5stack_nanoc6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
m5stack_nanoc6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
m5stack_nanoc6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
m5stack_nanoc6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
|
|
m5stack_nanoc6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
|
|
m5stack_nanoc6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
odroid_esp32.name=ODROID ESP32
|
|
|
|
odroid_esp32.bootloader.tool=esptool_py
|
|
odroid_esp32.bootloader.tool.default=esptool_py
|
|
|
|
odroid_esp32.upload.tool=esptool_py
|
|
odroid_esp32.upload.tool.default=esptool_py
|
|
odroid_esp32.upload.tool.network=esp_ota
|
|
|
|
odroid_esp32.upload.maximum_size=1310720
|
|
odroid_esp32.upload.maximum_data_size=327680
|
|
odroid_esp32.upload.flags=
|
|
odroid_esp32.upload.extra_flags=
|
|
|
|
odroid_esp32.serial.disableDTR=true
|
|
odroid_esp32.serial.disableRTS=true
|
|
|
|
odroid_esp32.build.tarch=xtensa
|
|
odroid_esp32.build.bootloader_addr=0x1000
|
|
odroid_esp32.build.target=esp32
|
|
odroid_esp32.build.mcu=esp32
|
|
odroid_esp32.build.core=esp32
|
|
odroid_esp32.build.variant=odroid_esp32
|
|
odroid_esp32.build.board=ODROID_ESP32
|
|
|
|
odroid_esp32.build.f_cpu=240000000L
|
|
odroid_esp32.build.flash_size=16MB
|
|
odroid_esp32.build.flash_mode=dio
|
|
odroid_esp32.build.boot=dio
|
|
odroid_esp32.build.partitions=default
|
|
odroid_esp32.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
odroid_esp32.build.extra_libs=
|
|
|
|
odroid_esp32.menu.FlashMode.qio=QIO
|
|
odroid_esp32.menu.FlashMode.qio.build.flash_mode=dio
|
|
odroid_esp32.menu.FlashMode.qio.build.boot=qio
|
|
odroid_esp32.menu.FlashMode.dio=DIO
|
|
odroid_esp32.menu.FlashMode.dio.build.flash_mode=dio
|
|
odroid_esp32.menu.FlashMode.dio.build.boot=dio
|
|
|
|
odroid_esp32.menu.FlashFreq.80=80MHz
|
|
odroid_esp32.menu.FlashFreq.80.build.flash_freq=80m
|
|
odroid_esp32.menu.FlashFreq.40=40MHz
|
|
odroid_esp32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
odroid_esp32.menu.PartitionScheme.default=Default
|
|
odroid_esp32.menu.PartitionScheme.default.build.partitions=default
|
|
odroid_esp32.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
odroid_esp32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
odroid_esp32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
odroid_esp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
odroid_esp32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
odroid_esp32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
odroid_esp32.menu.UploadSpeed.921600=921600
|
|
odroid_esp32.menu.UploadSpeed.921600.upload.speed=921600
|
|
odroid_esp32.menu.UploadSpeed.115200=115200
|
|
odroid_esp32.menu.UploadSpeed.115200.upload.speed=115200
|
|
odroid_esp32.menu.UploadSpeed.256000.windows=256000
|
|
odroid_esp32.menu.UploadSpeed.256000.upload.speed=256000
|
|
odroid_esp32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
odroid_esp32.menu.UploadSpeed.230400=230400
|
|
odroid_esp32.menu.UploadSpeed.230400.upload.speed=230400
|
|
odroid_esp32.menu.UploadSpeed.460800.linux=460800
|
|
odroid_esp32.menu.UploadSpeed.460800.macosx=460800
|
|
odroid_esp32.menu.UploadSpeed.460800.upload.speed=460800
|
|
odroid_esp32.menu.UploadSpeed.512000.windows=512000
|
|
odroid_esp32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
odroid_esp32.menu.DebugLevel.none=None
|
|
odroid_esp32.menu.DebugLevel.none.build.code_debug=0
|
|
odroid_esp32.menu.DebugLevel.error=Error
|
|
odroid_esp32.menu.DebugLevel.error.build.code_debug=1
|
|
odroid_esp32.menu.DebugLevel.warn=Warn
|
|
odroid_esp32.menu.DebugLevel.warn.build.code_debug=2
|
|
odroid_esp32.menu.DebugLevel.info=Info
|
|
odroid_esp32.menu.DebugLevel.info.build.code_debug=3
|
|
odroid_esp32.menu.DebugLevel.debug=Debug
|
|
odroid_esp32.menu.DebugLevel.debug.build.code_debug=4
|
|
odroid_esp32.menu.DebugLevel.verbose=Verbose
|
|
odroid_esp32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
odroid_esp32.menu.EraseFlash.none=Disabled
|
|
odroid_esp32.menu.EraseFlash.none.upload.erase_cmd=
|
|
odroid_esp32.menu.EraseFlash.all=Enabled
|
|
odroid_esp32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
heltec_wifi_kit_32.name=Heltec WiFi Kit 32
|
|
|
|
heltec_wifi_kit_32.bootloader.tool=esptool_py
|
|
heltec_wifi_kit_32.bootloader.tool.default=esptool_py
|
|
|
|
heltec_wifi_kit_32.upload.tool=esptool_py
|
|
heltec_wifi_kit_32.upload.tool.default=esptool_py
|
|
heltec_wifi_kit_32.upload.tool.network=esp_ota
|
|
|
|
heltec_wifi_kit_32.upload.maximum_size=1310720
|
|
heltec_wifi_kit_32.upload.maximum_data_size=327680
|
|
heltec_wifi_kit_32.upload.flags=
|
|
heltec_wifi_kit_32.upload.extra_flags=
|
|
|
|
heltec_wifi_kit_32.serial.disableDTR=true
|
|
heltec_wifi_kit_32.serial.disableRTS=true
|
|
|
|
heltec_wifi_kit_32.build.tarch=xtensa
|
|
heltec_wifi_kit_32.build.bootloader_addr=0x1000
|
|
heltec_wifi_kit_32.build.target=esp32
|
|
heltec_wifi_kit_32.build.mcu=esp32
|
|
heltec_wifi_kit_32.build.core=esp32
|
|
heltec_wifi_kit_32.build.variant=heltec_wifi_kit_32
|
|
heltec_wifi_kit_32.build.board=HELTEC_WIFI_KIT_32
|
|
|
|
heltec_wifi_kit_32.build.f_cpu=240000000L
|
|
heltec_wifi_kit_32.build.flash_size=4MB
|
|
heltec_wifi_kit_32.build.flash_freq=80m
|
|
heltec_wifi_kit_32.build.flash_mode=dio
|
|
heltec_wifi_kit_32.build.boot=dio
|
|
heltec_wifi_kit_32.build.partitions=default
|
|
heltec_wifi_kit_32.build.defines=
|
|
heltec_wifi_kit_32.build.band=LoRaWAN_NONE
|
|
heltec_wifi_kit_32.build.LoRaWanDebugLevel=0
|
|
|
|
heltec_wifi_kit_32.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
heltec_wifi_kit_32.menu.PartitionScheme.default.build.partitions=default
|
|
heltec_wifi_kit_32.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
heltec_wifi_kit_32.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
heltec_wifi_kit_32.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
heltec_wifi_kit_32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
heltec_wifi_kit_32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
heltec_wifi_kit_32.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
heltec_wifi_kit_32.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
heltec_wifi_kit_32.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
heltec_wifi_kit_32.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
heltec_wifi_kit_32.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
heltec_wifi_kit_32.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
heltec_wifi_kit_32.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
heltec_wifi_kit_32.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
heltec_wifi_kit_32.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
heltec_wifi_kit_32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
heltec_wifi_kit_32.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
heltec_wifi_kit_32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
|
|
heltec_wifi_kit_32.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
heltec_wifi_kit_32.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_wifi_kit_32.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
heltec_wifi_kit_32.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_wifi_kit_32.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
heltec_wifi_kit_32.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
|
|
heltec_wifi_kit_32.menu.UploadSpeed.921600=921600
|
|
heltec_wifi_kit_32.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_wifi_kit_32.menu.UploadSpeed.115200=115200
|
|
heltec_wifi_kit_32.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_wifi_kit_32.menu.UploadSpeed.256000.windows=256000
|
|
heltec_wifi_kit_32.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_wifi_kit_32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_wifi_kit_32.menu.UploadSpeed.230400=230400
|
|
heltec_wifi_kit_32.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_wifi_kit_32.menu.UploadSpeed.460800.linux=460800
|
|
heltec_wifi_kit_32.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_wifi_kit_32.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_wifi_kit_32.menu.UploadSpeed.512000.windows=512000
|
|
heltec_wifi_kit_32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_wifi_kit_32.menu.DebugLevel.none=None
|
|
heltec_wifi_kit_32.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_wifi_kit_32.menu.DebugLevel.error=Error
|
|
heltec_wifi_kit_32.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_wifi_kit_32.menu.DebugLevel.warn=Warn
|
|
heltec_wifi_kit_32.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_wifi_kit_32.menu.DebugLevel.info=Info
|
|
heltec_wifi_kit_32.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_wifi_kit_32.menu.DebugLevel.debug=Debug
|
|
heltec_wifi_kit_32.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_wifi_kit_32.menu.DebugLevel.verbose=Verbose
|
|
heltec_wifi_kit_32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_wifi_kit_32.menu.EraseFlash.none=Disabled
|
|
heltec_wifi_kit_32.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_wifi_kit_32.menu.EraseFlash.all=Enabled
|
|
heltec_wifi_kit_32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
heltec_wifi_kit_32_V3.name=Heltec WiFi Kit 32(V3)
|
|
|
|
heltec_wifi_kit_32_V3.bootloader.tool=esptool_py
|
|
heltec_wifi_kit_32_V3.bootloader.tool.default=esptool_py
|
|
|
|
heltec_wifi_kit_32_V3.upload.tool=esptool_py
|
|
heltec_wifi_kit_32_V3.upload.tool.default=esptool_py
|
|
heltec_wifi_kit_32_V3.upload.tool.network=esp_ota
|
|
|
|
heltec_wifi_kit_32_V3.upload.maximum_size=3342336
|
|
heltec_wifi_kit_32_V3.upload.maximum_data_size=327680
|
|
heltec_wifi_kit_32_V3.upload.flags=
|
|
heltec_wifi_kit_32_V3.upload.extra_flags=
|
|
heltec_wifi_kit_32_V3.upload.use_1200bps_touch=false
|
|
heltec_wifi_kit_32_V3.upload.wait_for_upload_port=false
|
|
|
|
heltec_wifi_kit_32_V3.serial.disableDTR=false
|
|
heltec_wifi_kit_32_V3.serial.disableRTS=false
|
|
|
|
heltec_wifi_kit_32_V3.build.tarch=xtensa
|
|
heltec_wifi_kit_32_V3.build.bootloader_addr=0x0
|
|
heltec_wifi_kit_32_V3.build.target=esp32s3
|
|
heltec_wifi_kit_32_V3.build.mcu=esp32s3
|
|
heltec_wifi_kit_32_V3.build.core=esp32
|
|
heltec_wifi_kit_32_V3.build.variant=heltec_wifi_kit_32_V3
|
|
heltec_wifi_kit_32_V3.build.board=HELTEC_WIFI_KIT_32_V3
|
|
|
|
heltec_wifi_kit_32_V3.build.usb_mode=1
|
|
heltec_wifi_kit_32_V3.build.cdc_on_boot=0
|
|
heltec_wifi_kit_32_V3.build.msc_on_boot=0
|
|
heltec_wifi_kit_32_V3.build.dfu_on_boot=0
|
|
heltec_wifi_kit_32_V3.build.f_cpu=240000000L
|
|
heltec_wifi_kit_32_V3.build.flash_size=8MB
|
|
heltec_wifi_kit_32_V3.build.flash_freq=80m
|
|
heltec_wifi_kit_32_V3.build.flash_mode=dio
|
|
heltec_wifi_kit_32_V3.build.boot=qio
|
|
heltec_wifi_kit_32_V3.build.boot_freq=80m
|
|
heltec_wifi_kit_32_V3.build.partitions=default_8MB
|
|
heltec_wifi_kit_32_V3.build.loop_core=
|
|
heltec_wifi_kit_32_V3.build.event_core=
|
|
heltec_wifi_kit_32_V3.build.psram_type=qspi
|
|
heltec_wifi_kit_32_V3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
heltec_wifi_kit_32_V3.menu.LoopCore.1=Core 1
|
|
heltec_wifi_kit_32_V3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
heltec_wifi_kit_32_V3.menu.LoopCore.0=Core 0
|
|
heltec_wifi_kit_32_V3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
heltec_wifi_kit_32_V3.menu.EventsCore.1=Core 1
|
|
heltec_wifi_kit_32_V3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
heltec_wifi_kit_32_V3.menu.EventsCore.0=Core 0
|
|
heltec_wifi_kit_32_V3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
heltec_wifi_kit_32_V3.menu.CPUFreq.240=240MHz (WiFi)
|
|
heltec_wifi_kit_32_V3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_wifi_kit_32_V3.menu.CPUFreq.160=160MHz (WiFi)
|
|
heltec_wifi_kit_32_V3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_wifi_kit_32_V3.menu.CPUFreq.80=80MHz (WiFi)
|
|
heltec_wifi_kit_32_V3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
heltec_wifi_kit_32_V3.menu.CPUFreq.40=40MHz
|
|
heltec_wifi_kit_32_V3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
heltec_wifi_kit_32_V3.menu.CPUFreq.20=20MHz
|
|
heltec_wifi_kit_32_V3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
heltec_wifi_kit_32_V3.menu.CPUFreq.10=10MHz
|
|
heltec_wifi_kit_32_V3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
heltec_wifi_kit_32_V3.menu.UploadSpeed.921600=921600
|
|
heltec_wifi_kit_32_V3.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_wifi_kit_32_V3.menu.UploadSpeed.115200=115200
|
|
heltec_wifi_kit_32_V3.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_wifi_kit_32_V3.menu.UploadSpeed.256000.windows=256000
|
|
heltec_wifi_kit_32_V3.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_wifi_kit_32_V3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_wifi_kit_32_V3.menu.UploadSpeed.230400=230400
|
|
heltec_wifi_kit_32_V3.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_wifi_kit_32_V3.menu.UploadSpeed.460800.linux=460800
|
|
heltec_wifi_kit_32_V3.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_wifi_kit_32_V3.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_wifi_kit_32_V3.menu.UploadSpeed.512000.windows=512000
|
|
heltec_wifi_kit_32_V3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_wifi_kit_32_V3.menu.DebugLevel.none=None
|
|
heltec_wifi_kit_32_V3.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_wifi_kit_32_V3.menu.DebugLevel.error=Error
|
|
heltec_wifi_kit_32_V3.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_wifi_kit_32_V3.menu.DebugLevel.warn=Warn
|
|
heltec_wifi_kit_32_V3.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_wifi_kit_32_V3.menu.DebugLevel.info=Info
|
|
heltec_wifi_kit_32_V3.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_wifi_kit_32_V3.menu.DebugLevel.debug=Debug
|
|
heltec_wifi_kit_32_V3.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_wifi_kit_32_V3.menu.DebugLevel.verbose=Verbose
|
|
heltec_wifi_kit_32_V3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_wifi_kit_32_V3.menu.EraseFlash.none=Disabled
|
|
heltec_wifi_kit_32_V3.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_wifi_kit_32_V3.menu.EraseFlash.all=Enabled
|
|
heltec_wifi_kit_32_V3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
heltec_wifi_lora_32.name=Heltec WiFi LoRa 32
|
|
|
|
heltec_wifi_lora_32.bootloader.tool=esptool_py
|
|
heltec_wifi_lora_32.bootloader.tool.default=esptool_py
|
|
|
|
heltec_wifi_lora_32.upload.tool=esptool_py
|
|
heltec_wifi_lora_32.upload.tool.default=esptool_py
|
|
heltec_wifi_lora_32.upload.tool.network=esp_ota
|
|
|
|
heltec_wifi_lora_32.upload.maximum_size=1310720
|
|
heltec_wifi_lora_32.upload.maximum_data_size=327680
|
|
heltec_wifi_lora_32.upload.flags=
|
|
heltec_wifi_lora_32.upload.extra_flags=
|
|
|
|
heltec_wifi_lora_32.serial.disableDTR=true
|
|
heltec_wifi_lora_32.serial.disableRTS=true
|
|
|
|
heltec_wifi_lora_32.build.tarch=xtensa
|
|
heltec_wifi_lora_32.build.bootloader_addr=0x1000
|
|
heltec_wifi_lora_32.build.target=esp32
|
|
heltec_wifi_lora_32.build.mcu=esp32
|
|
heltec_wifi_lora_32.build.core=esp32
|
|
heltec_wifi_lora_32.build.variant=heltec_wifi_lora_32
|
|
heltec_wifi_lora_32.build.board=HELTEC_WIFI_LORA_32
|
|
|
|
heltec_wifi_lora_32.build.f_cpu=240000000L
|
|
heltec_wifi_lora_32.build.flash_size=4MB
|
|
heltec_wifi_lora_32.build.flash_freq=80m
|
|
heltec_wifi_lora_32.build.flash_mode=dio
|
|
heltec_wifi_lora_32.build.boot=qio
|
|
heltec_wifi_lora_32.build.partitions=default
|
|
heltec_wifi_lora_32.build.psram=
|
|
heltec_wifi_lora_32.build.defines=-D{build.band} -DMCU_ESP32_D0 -DWIFI_LORA_32 -DHELTEC_BOARD=1 -DRADIO_CHIP_SX127X -DSLOW_CLK_TPYE=0 -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} -DLORAWAN_PREAMBLE_LENGTH={build.LORAWAN_PREAMBLE_LENGTH} -DLORAWAN_DEVEUI_AUTO={build.LORAWAN_DEVEUI_AUTO} {build.psram}
|
|
|
|
heltec_wifi_lora_32.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
heltec_wifi_lora_32.menu.PartitionScheme.default.build.partitions=default
|
|
heltec_wifi_lora_32.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
heltec_wifi_lora_32.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
heltec_wifi_lora_32.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
heltec_wifi_lora_32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
heltec_wifi_lora_32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
heltec_wifi_lora_32.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
heltec_wifi_lora_32.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
heltec_wifi_lora_32.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
heltec_wifi_lora_32.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
heltec_wifi_lora_32.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
heltec_wifi_lora_32.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
heltec_wifi_lora_32.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
heltec_wifi_lora_32.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
heltec_wifi_lora_32.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
heltec_wifi_lora_32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
heltec_wifi_lora_32.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
heltec_wifi_lora_32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
|
|
heltec_wifi_lora_32.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
heltec_wifi_lora_32.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_wifi_lora_32.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
heltec_wifi_lora_32.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_wifi_lora_32.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
heltec_wifi_lora_32.menu.CPUFreq.160.build.f_cpu=80000000L
|
|
|
|
heltec_wifi_lora_32.menu.UploadSpeed.921600=921600
|
|
heltec_wifi_lora_32.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_wifi_lora_32.menu.UploadSpeed.115200=115200
|
|
heltec_wifi_lora_32.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_wifi_lora_32.menu.UploadSpeed.256000.windows=256000
|
|
heltec_wifi_lora_32.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_wifi_lora_32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_wifi_lora_32.menu.UploadSpeed.230400=230400
|
|
heltec_wifi_lora_32.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_wifi_lora_32.menu.UploadSpeed.460800.linux=460800
|
|
heltec_wifi_lora_32.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_wifi_lora_32.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_wifi_lora_32.menu.UploadSpeed.512000.windows=512000
|
|
heltec_wifi_lora_32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_wifi_lora_32.menu.DebugLevel.none=None
|
|
heltec_wifi_lora_32.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_wifi_lora_32.menu.DebugLevel.error=Error
|
|
heltec_wifi_lora_32.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_wifi_lora_32.menu.DebugLevel.warn=Warn
|
|
heltec_wifi_lora_32.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_wifi_lora_32.menu.DebugLevel.info=Info
|
|
heltec_wifi_lora_32.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_wifi_lora_32.menu.DebugLevel.debug=Debug
|
|
heltec_wifi_lora_32.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_wifi_lora_32.menu.DebugLevel.verbose=Verbose
|
|
heltec_wifi_lora_32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.0=REGION_EU868
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.0.build.band=REGION_EU868
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.1=REGION_EU433
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.1.build.band=REGION_EU433
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.2=REGION_CN470
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.2.build.band=REGION_CN470
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.3=REGION_US915
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.3.build.band=REGION_US915
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.4=REGION_AU915
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.4.build.band=REGION_AU915
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.5=REGION_CN779
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.5.build.band=REGION_CN779
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.6=REGION_AS923
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.6.build.band=REGION_AS923
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.7=REGION_KR920
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.7.build.band=REGION_KR920
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.8=REGION_IN865
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.8.build.band=REGION_IN865
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
|
|
heltec_wifi_lora_32.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
|
|
|
|
heltec_wifi_lora_32.menu.LoRaWanDebugLevel.0=None
|
|
heltec_wifi_lora_32.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
|
|
heltec_wifi_lora_32.menu.LoRaWanDebugLevel.1=Freq
|
|
heltec_wifi_lora_32.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
|
|
heltec_wifi_lora_32.menu.LoRaWanDebugLevel.2=Freq && DIO
|
|
heltec_wifi_lora_32.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
|
|
heltec_wifi_lora_32.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
|
|
heltec_wifi_lora_32.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
|
|
|
|
heltec_wifi_lora_32.menu.LORAWAN_DEVEUI.0=CUSTOM
|
|
heltec_wifi_lora_32.menu.LORAWAN_DEVEUI.0.build.LORAWAN_DEVEUI_AUTO=0
|
|
heltec_wifi_lora_32.menu.LORAWAN_DEVEUI.1=Generate By ChipID
|
|
heltec_wifi_lora_32.menu.LORAWAN_DEVEUI.1.build.LORAWAN_DEVEUI_AUTO=1
|
|
|
|
heltec_wifi_lora_32.menu.LORAWAN_PREAMBLE_LENGTH.0=8(default)
|
|
heltec_wifi_lora_32.menu.LORAWAN_PREAMBLE_LENGTH.0.build.LORAWAN_PREAMBLE_LENGTH=8
|
|
heltec_wifi_lora_32.menu.LORAWAN_PREAMBLE_LENGTH.1=16(For M00 and M00L)
|
|
heltec_wifi_lora_32.menu.LORAWAN_PREAMBLE_LENGTH.1.build.LORAWAN_PREAMBLE_LENGTH=16
|
|
|
|
|
|
heltec_wifi_lora_32.menu.EraseFlash.none=Disabled
|
|
heltec_wifi_lora_32.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_wifi_lora_32.menu.EraseFlash.all=Enabled
|
|
heltec_wifi_lora_32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
heltec_wifi_lora_32_V2.name=Heltec WiFi LoRa 32(V2)
|
|
|
|
heltec_wifi_lora_32_V2.bootloader.tool=esptool_py
|
|
heltec_wifi_lora_32_V2.bootloader.tool.default=esptool_py
|
|
|
|
heltec_wifi_lora_32_V2.upload.tool=esptool_py
|
|
heltec_wifi_lora_32_V2.upload.tool.default=esptool_py
|
|
heltec_wifi_lora_32_V2.upload.tool.network=esp_ota
|
|
|
|
heltec_wifi_lora_32_V2.upload.maximum_size=3342336
|
|
heltec_wifi_lora_32_V2.upload.maximum_data_size=327680
|
|
heltec_wifi_lora_32_V2.upload.flags=
|
|
heltec_wifi_lora_32_V2.upload.extra_flags=
|
|
|
|
heltec_wifi_lora_32_V2.serial.disableDTR=true
|
|
heltec_wifi_lora_32_V2.serial.disableRTS=true
|
|
|
|
heltec_wifi_lora_32_V2.build.tarch=xtensa
|
|
heltec_wifi_lora_32_V2.build.bootloader_addr=0x1000
|
|
heltec_wifi_lora_32_V2.build.target=esp32
|
|
heltec_wifi_lora_32_V2.build.mcu=esp32
|
|
heltec_wifi_lora_32_V2.build.core=esp32
|
|
heltec_wifi_lora_32_V2.build.variant=heltec_wifi_lora_32_V2
|
|
heltec_wifi_lora_32_V2.build.board=HELTEC_WIFI_LORA_32_V2
|
|
|
|
heltec_wifi_lora_32_V2.build.f_cpu=240000000L
|
|
heltec_wifi_lora_32_V2.build.flash_size=8MB
|
|
heltec_wifi_lora_32_V2.build.flash_freq=80m
|
|
heltec_wifi_lora_32_V2.build.flash_mode=dio
|
|
heltec_wifi_lora_32_V2.build.boot=qio
|
|
heltec_wifi_lora_32_V2.build.partitions=default_8MB
|
|
heltec_wifi_lora_32_V2.build.psram=
|
|
heltec_wifi_lora_32_V2.build.defines=-D{build.band} -DMCU_ESP32_D0 -DWIFI_LORA_32_V2 -DHELTEC_BOARD=0 -DRADIO_CHIP_SX127X -DSLOW_CLK_TPYE=0 -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} -DLORAWAN_PREAMBLE_LENGTH={build.LORAWAN_PREAMBLE_LENGTH} -DLORAWAN_DEVEUI_AUTO={build.LORAWAN_DEVEUI_AUTO} {build.psram}
|
|
|
|
heltec_wifi_lora_32_V2.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
heltec_wifi_lora_32_V2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_wifi_lora_32_V2.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
heltec_wifi_lora_32_V2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_wifi_lora_32_V2.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
heltec_wifi_lora_32_V2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
|
|
heltec_wifi_lora_32_V2.menu.UploadSpeed.921600=921600
|
|
heltec_wifi_lora_32_V2.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_wifi_lora_32_V2.menu.UploadSpeed.115200=115200
|
|
heltec_wifi_lora_32_V2.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_wifi_lora_32_V2.menu.UploadSpeed.256000.windows=256000
|
|
heltec_wifi_lora_32_V2.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_wifi_lora_32_V2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_wifi_lora_32_V2.menu.UploadSpeed.230400=230400
|
|
heltec_wifi_lora_32_V2.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_wifi_lora_32_V2.menu.UploadSpeed.460800.linux=460800
|
|
heltec_wifi_lora_32_V2.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_wifi_lora_32_V2.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_wifi_lora_32_V2.menu.UploadSpeed.512000.windows=512000
|
|
heltec_wifi_lora_32_V2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_wifi_lora_32_V2.menu.DebugLevel.none=None
|
|
heltec_wifi_lora_32_V2.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_wifi_lora_32_V2.menu.DebugLevel.error=Error
|
|
heltec_wifi_lora_32_V2.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_wifi_lora_32_V2.menu.DebugLevel.warn=Warn
|
|
heltec_wifi_lora_32_V2.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_wifi_lora_32_V2.menu.DebugLevel.info=Info
|
|
heltec_wifi_lora_32_V2.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_wifi_lora_32_V2.menu.DebugLevel.debug=Debug
|
|
heltec_wifi_lora_32_V2.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_wifi_lora_32_V2.menu.DebugLevel.verbose=Verbose
|
|
heltec_wifi_lora_32_V2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.0=REGION_EU868
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.0.build.band=REGION_EU868
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.1=REGION_EU433
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.1.build.band=REGION_EU433
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.2=REGION_CN470
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.2.build.band=REGION_CN470
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.3=REGION_US915
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.3.build.band=REGION_US915
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.4=REGION_AU915
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.4.build.band=REGION_AU915
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.5=REGION_CN779
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.5.build.band=REGION_CN779
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.6=REGION_AS923
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.6.build.band=REGION_AS923
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.7=REGION_KR920
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.7.build.band=REGION_KR920
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.8=REGION_IN865
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.8.build.band=REGION_IN865
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
|
|
|
|
heltec_wifi_lora_32_V2.menu.LoRaWanDebugLevel.0=None
|
|
heltec_wifi_lora_32_V2.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
|
|
heltec_wifi_lora_32_V2.menu.LoRaWanDebugLevel.1=Freq
|
|
heltec_wifi_lora_32_V2.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
|
|
heltec_wifi_lora_32_V2.menu.LoRaWanDebugLevel.2=Freq && DIO
|
|
heltec_wifi_lora_32_V2.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
|
|
heltec_wifi_lora_32_V2.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
|
|
heltec_wifi_lora_32_V2.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
|
|
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_DEVEUI.0=CUSTOM
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_DEVEUI.0.build.LORAWAN_DEVEUI_AUTO=0
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_DEVEUI.1=Generate By ChipID
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_DEVEUI.1.build.LORAWAN_DEVEUI_AUTO=1
|
|
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_PREAMBLE_LENGTH.0=8(default)
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_PREAMBLE_LENGTH.0.build.LORAWAN_PREAMBLE_LENGTH=8
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_PREAMBLE_LENGTH.1=16(For M00 and M00L)
|
|
heltec_wifi_lora_32_V2.menu.LORAWAN_PREAMBLE_LENGTH.1.build.LORAWAN_PREAMBLE_LENGTH=16
|
|
|
|
heltec_wifi_lora_32_V2.menu.EraseFlash.none=Disabled
|
|
heltec_wifi_lora_32_V2.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_wifi_lora_32_V2.menu.EraseFlash.all=Enabled
|
|
heltec_wifi_lora_32_V2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
heltec_wifi_lora_32_V3.name=Heltec WiFi LoRa 32(V3)
|
|
|
|
heltec_wifi_lora_32_V3.bootloader.tool=esptool_py
|
|
heltec_wifi_lora_32_V3.bootloader.tool.default=esptool_py
|
|
|
|
heltec_wifi_lora_32_V3.upload.tool=esptool_py
|
|
heltec_wifi_lora_32_V3.upload.tool.default=esptool_py
|
|
heltec_wifi_lora_32_V3.upload.tool.network=esp_ota
|
|
|
|
heltec_wifi_lora_32_V3.upload.maximum_size=3342336
|
|
heltec_wifi_lora_32_V3.upload.maximum_data_size=327680
|
|
heltec_wifi_lora_32_V3.upload.flags=
|
|
heltec_wifi_lora_32_V3.upload.extra_flags=
|
|
heltec_wifi_lora_32_V3.upload.use_1200bps_touch=false
|
|
heltec_wifi_lora_32_V3.upload.wait_for_upload_port=false
|
|
|
|
heltec_wifi_lora_32_V3.serial.disableDTR=false
|
|
heltec_wifi_lora_32_V3.serial.disableRTS=false
|
|
|
|
heltec_wifi_lora_32_V3.build.tarch=xtensa
|
|
heltec_wifi_lora_32_V3.build.bootloader_addr=0x0
|
|
heltec_wifi_lora_32_V3.build.target=esp32s3
|
|
heltec_wifi_lora_32_V3.build.mcu=esp32s3
|
|
heltec_wifi_lora_32_V3.build.core=esp32
|
|
heltec_wifi_lora_32_V3.build.variant=heltec_wifi_lora_32_V3
|
|
heltec_wifi_lora_32_V3.build.board=HELTEC_WIFI_LORA_32_V3
|
|
|
|
heltec_wifi_lora_32_V3.build.usb_mode=1
|
|
heltec_wifi_lora_32_V3.build.cdc_on_boot=0
|
|
heltec_wifi_lora_32_V3.build.msc_on_boot=0
|
|
heltec_wifi_lora_32_V3.build.dfu_on_boot=0
|
|
heltec_wifi_lora_32_V3.build.f_cpu=240000000L
|
|
heltec_wifi_lora_32_V3.build.flash_size=8MB
|
|
heltec_wifi_lora_32_V3.build.flash_freq=80m
|
|
heltec_wifi_lora_32_V3.build.flash_mode=dio
|
|
heltec_wifi_lora_32_V3.build.boot=qio
|
|
heltec_wifi_lora_32_V3.build.boot_freq=80m
|
|
heltec_wifi_lora_32_V3.build.partitions=default_8MB
|
|
heltec_wifi_lora_32_V3.build.loop_core=
|
|
heltec_wifi_lora_32_V3.build.event_core=
|
|
heltec_wifi_lora_32_V3.build.psram_type=qspi
|
|
heltec_wifi_lora_32_V3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
heltec_wifi_lora_32_V3.menu.LoopCore.1=Core 1
|
|
heltec_wifi_lora_32_V3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
heltec_wifi_lora_32_V3.menu.LoopCore.0=Core 0
|
|
heltec_wifi_lora_32_V3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
heltec_wifi_lora_32_V3.menu.EventsCore.1=Core 1
|
|
heltec_wifi_lora_32_V3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
heltec_wifi_lora_32_V3.menu.EventsCore.0=Core 0
|
|
heltec_wifi_lora_32_V3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
heltec_wifi_lora_32_V3.menu.CPUFreq.240=240MHz (WiFi)
|
|
heltec_wifi_lora_32_V3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_wifi_lora_32_V3.menu.CPUFreq.160=160MHz (WiFi)
|
|
heltec_wifi_lora_32_V3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_wifi_lora_32_V3.menu.CPUFreq.80=80MHz (WiFi)
|
|
heltec_wifi_lora_32_V3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
heltec_wifi_lora_32_V3.menu.CPUFreq.40=40MHz
|
|
heltec_wifi_lora_32_V3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
heltec_wifi_lora_32_V3.menu.CPUFreq.20=20MHz
|
|
heltec_wifi_lora_32_V3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
heltec_wifi_lora_32_V3.menu.CPUFreq.10=10MHz
|
|
heltec_wifi_lora_32_V3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
heltec_wifi_lora_32_V3.menu.UploadSpeed.921600=921600
|
|
heltec_wifi_lora_32_V3.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_wifi_lora_32_V3.menu.UploadSpeed.115200=115200
|
|
heltec_wifi_lora_32_V3.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_wifi_lora_32_V3.menu.UploadSpeed.256000.windows=256000
|
|
heltec_wifi_lora_32_V3.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_wifi_lora_32_V3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_wifi_lora_32_V3.menu.UploadSpeed.230400=230400
|
|
heltec_wifi_lora_32_V3.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_wifi_lora_32_V3.menu.UploadSpeed.460800.linux=460800
|
|
heltec_wifi_lora_32_V3.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_wifi_lora_32_V3.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_wifi_lora_32_V3.menu.UploadSpeed.512000.windows=512000
|
|
heltec_wifi_lora_32_V3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_wifi_lora_32_V3.menu.DebugLevel.none=None
|
|
heltec_wifi_lora_32_V3.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_wifi_lora_32_V3.menu.DebugLevel.error=Error
|
|
heltec_wifi_lora_32_V3.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_wifi_lora_32_V3.menu.DebugLevel.warn=Warn
|
|
heltec_wifi_lora_32_V3.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_wifi_lora_32_V3.menu.DebugLevel.info=Info
|
|
heltec_wifi_lora_32_V3.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_wifi_lora_32_V3.menu.DebugLevel.debug=Debug
|
|
heltec_wifi_lora_32_V3.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_wifi_lora_32_V3.menu.DebugLevel.verbose=Verbose
|
|
heltec_wifi_lora_32_V3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.0=REGION_EU868
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.0.build.band=REGION_EU868
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.1=REGION_EU433
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.1.build.band=REGION_EU433
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.2=REGION_CN470
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.2.build.band=REGION_CN470
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.3=REGION_US915
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.3.build.band=REGION_US915
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.4=REGION_AU915
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.4.build.band=REGION_AU915
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.5=REGION_CN779
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.5.build.band=REGION_CN779
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.6=REGION_AS923
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.6.build.band=REGION_AS923
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.7=REGION_KR920
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.7.build.band=REGION_KR920
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.8=REGION_IN865
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.8.build.band=REGION_IN865
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
|
|
|
|
heltec_wifi_lora_32_V3.menu.LoRaWanDebugLevel.0=None
|
|
heltec_wifi_lora_32_V3.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
|
|
heltec_wifi_lora_32_V3.menu.LoRaWanDebugLevel.1=Freq
|
|
heltec_wifi_lora_32_V3.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
|
|
heltec_wifi_lora_32_V3.menu.LoRaWanDebugLevel.2=Freq && DIO
|
|
heltec_wifi_lora_32_V3.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
|
|
heltec_wifi_lora_32_V3.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
|
|
heltec_wifi_lora_32_V3.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
|
|
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_DEVEUI.0=CUSTOM
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_DEVEUI.0.build.LORAWAN_DEVEUI_AUTO=0
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_DEVEUI.1=Generate By ChipID
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_DEVEUI.1.build.LORAWAN_DEVEUI_AUTO=1
|
|
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_PREAMBLE_LENGTH.0=8(default)
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_PREAMBLE_LENGTH.0.build.LORAWAN_PREAMBLE_LENGTH=8
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_PREAMBLE_LENGTH.1=16(For M00 and M00L)
|
|
heltec_wifi_lora_32_V3.menu.LORAWAN_PREAMBLE_LENGTH.1.build.LORAWAN_PREAMBLE_LENGTH=16
|
|
|
|
heltec_wifi_lora_32_V3.menu.SLOW_CLK_TPYE.0=Internal (default)
|
|
heltec_wifi_lora_32_V3.menu.SLOW_CLK_TPYE.0.build.SLOW_CLK_TPYE=0
|
|
heltec_wifi_lora_32_V3.menu.SLOW_CLK_TPYE.1=External 32K
|
|
heltec_wifi_lora_32_V3.menu.SLOW_CLK_TPYE.1.build.SLOW_CLK_TPYE=1
|
|
|
|
heltec_wifi_lora_32_V3.build.defines=-D{build.band} -DMCU_ESP32_S3 -DHELTEC_BOARD=30 -DWIFI_LORA_32_V3 -DSLOW_CLK_TPYE={build.SLOW_CLK_TPYE} -DRADIO_CHIP_SX1262 -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} -DLORAWAN_PREAMBLE_LENGTH={build.LORAWAN_PREAMBLE_LENGTH} -DLORAWAN_DEVEUI_AUTO={build.LORAWAN_DEVEUI_AUTO} -D{build.board}
|
|
|
|
heltec_wifi_lora_32_V3.menu.EraseFlash.none=Disabled
|
|
heltec_wifi_lora_32_V3.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_wifi_lora_32_V3.menu.EraseFlash.all=Enabled
|
|
heltec_wifi_lora_32_V3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
heltec_wireless_stick_V3.name=Heltec Wireless Stick(V3)
|
|
|
|
heltec_wireless_stick_V3.bootloader.tool=esptool_py
|
|
heltec_wireless_stick_V3.bootloader.tool.default=esptool_py
|
|
|
|
heltec_wireless_stick_V3.upload.tool=esptool_py
|
|
heltec_wireless_stick_V3.upload.tool.default=esptool_py
|
|
heltec_wireless_stick_V3.upload.tool.network=esp_ota
|
|
|
|
heltec_wireless_stick_V3.upload.maximum_size=3342336
|
|
heltec_wireless_stick_V3.upload.maximum_data_size=327680
|
|
heltec_wireless_stick_V3.upload.flags=
|
|
heltec_wireless_stick_V3.upload.extra_flags=
|
|
heltec_wireless_stick_V3.upload.use_1200bps_touch=false
|
|
heltec_wireless_stick_V3.upload.wait_for_upload_port=false
|
|
|
|
heltec_wireless_stick_V3.serial.disableDTR=false
|
|
heltec_wireless_stick_V3.serial.disableRTS=false
|
|
|
|
heltec_wireless_stick_V3.build.tarch=xtensa
|
|
heltec_wireless_stick_V3.build.bootloader_addr=0x0
|
|
heltec_wireless_stick_V3.build.target=esp32s3
|
|
heltec_wireless_stick_V3.build.mcu=esp32s3
|
|
heltec_wireless_stick_V3.build.core=esp32
|
|
heltec_wireless_stick_V3.build.variant=heltec_wireless_stick_v3
|
|
heltec_wireless_stick_V3.build.board=HELTEC_WIRELESS_STICK_V3
|
|
|
|
heltec_wireless_stick_V3.build.usb_mode=1
|
|
heltec_wireless_stick_V3.build.cdc_on_boot=0
|
|
heltec_wireless_stick_V3.build.msc_on_boot=0
|
|
heltec_wireless_stick_V3.build.dfu_on_boot=0
|
|
heltec_wireless_stick_V3.build.f_cpu=240000000L
|
|
heltec_wireless_stick_V3.build.flash_size=8MB
|
|
heltec_wireless_stick_V3.build.flash_freq=80m
|
|
heltec_wireless_stick_V3.build.flash_mode=dio
|
|
heltec_wireless_stick_V3.build.boot=qio
|
|
heltec_wireless_stick_V3.build.boot_freq=80m
|
|
heltec_wireless_stick_V3.build.partitions=default_8MB
|
|
heltec_wireless_stick_V3.build.loop_core=
|
|
heltec_wireless_stick_V3.build.event_core=
|
|
heltec_wireless_stick_V3.build.psram_type=qspi
|
|
heltec_wireless_stick_V3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
heltec_wireless_stick_V3.menu.LoopCore.1=Core 1
|
|
heltec_wireless_stick_V3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
heltec_wireless_stick_V3.menu.LoopCore.0=Core 0
|
|
heltec_wireless_stick_V3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
heltec_wireless_stick_V3.menu.EventsCore.1=Core 1
|
|
heltec_wireless_stick_V3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
heltec_wireless_stick_V3.menu.EventsCore.0=Core 0
|
|
heltec_wireless_stick_V3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
heltec_wireless_stick_V3.menu.CPUFreq.240=240MHz (WiFi)
|
|
heltec_wireless_stick_V3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_wireless_stick_V3.menu.CPUFreq.160=160MHz (WiFi)
|
|
heltec_wireless_stick_V3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_wireless_stick_V3.menu.CPUFreq.80=80MHz (WiFi)
|
|
heltec_wireless_stick_V3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
heltec_wireless_stick_V3.menu.CPUFreq.40=40MHz
|
|
heltec_wireless_stick_V3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
heltec_wireless_stick_V3.menu.CPUFreq.20=20MHz
|
|
heltec_wireless_stick_V3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
heltec_wireless_stick_V3.menu.CPUFreq.10=10MHz
|
|
heltec_wireless_stick_V3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
heltec_wireless_stick_V3.menu.UploadSpeed.921600=921600
|
|
heltec_wireless_stick_V3.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_wireless_stick_V3.menu.UploadSpeed.115200=115200
|
|
heltec_wireless_stick_V3.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_wireless_stick_V3.menu.UploadSpeed.256000.windows=256000
|
|
heltec_wireless_stick_V3.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_wireless_stick_V3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_wireless_stick_V3.menu.UploadSpeed.230400=230400
|
|
heltec_wireless_stick_V3.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_wireless_stick_V3.menu.UploadSpeed.460800.linux=460800
|
|
heltec_wireless_stick_V3.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_wireless_stick_V3.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_wireless_stick_V3.menu.UploadSpeed.512000.windows=512000
|
|
heltec_wireless_stick_V3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_wireless_stick_V3.menu.DebugLevel.none=None
|
|
heltec_wireless_stick_V3.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_wireless_stick_V3.menu.DebugLevel.error=Error
|
|
heltec_wireless_stick_V3.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_wireless_stick_V3.menu.DebugLevel.warn=Warn
|
|
heltec_wireless_stick_V3.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_wireless_stick_V3.menu.DebugLevel.info=Info
|
|
heltec_wireless_stick_V3.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_wireless_stick_V3.menu.DebugLevel.debug=Debug
|
|
heltec_wireless_stick_V3.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_wireless_stick_V3.menu.DebugLevel.verbose=Verbose
|
|
heltec_wireless_stick_V3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.0=REGION_EU868
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.0.build.band=REGION_EU868
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.1=REGION_EU433
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.1.build.band=REGION_EU433
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.2=REGION_CN470
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.2.build.band=REGION_CN470
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.3=REGION_US915
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.3.build.band=REGION_US915
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.4=REGION_AU915
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.4.build.band=REGION_AU915
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.5=REGION_CN779
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.5.build.band=REGION_CN779
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.6=REGION_AS923
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.6.build.band=REGION_AS923
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.7=REGION_KR920
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.7.build.band=REGION_KR920
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.8=REGION_IN865
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.8.build.band=REGION_IN865
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
|
|
heltec_wireless_stick_V3.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
|
|
|
|
heltec_wireless_stick_V3.menu.LoRaWanDebugLevel.0=None
|
|
heltec_wireless_stick_V3.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
|
|
heltec_wireless_stick_V3.menu.LoRaWanDebugLevel.1=Freq
|
|
heltec_wireless_stick_V3.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
|
|
heltec_wireless_stick_V3.menu.LoRaWanDebugLevel.2=Freq && DIO
|
|
heltec_wireless_stick_V3.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
|
|
heltec_wireless_stick_V3.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
|
|
heltec_wireless_stick_V3.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
|
|
|
|
heltec_wireless_stick_V3.menu.LORAWAN_DEVEUI.0=CUSTOM
|
|
heltec_wireless_stick_V3.menu.LORAWAN_DEVEUI.0.build.LORAWAN_DEVEUI_AUTO=0
|
|
heltec_wireless_stick_V3.menu.LORAWAN_DEVEUI.1=Generate By ChipID
|
|
heltec_wireless_stick_V3.menu.LORAWAN_DEVEUI.1.build.LORAWAN_DEVEUI_AUTO=1
|
|
|
|
heltec_wireless_stick_V3.menu.LORAWAN_PREAMBLE_LENGTH.0=8(default)
|
|
heltec_wireless_stick_V3.menu.LORAWAN_PREAMBLE_LENGTH.0.build.LORAWAN_PREAMBLE_LENGTH=8
|
|
heltec_wireless_stick_V3.menu.LORAWAN_PREAMBLE_LENGTH.1=16(For M00 and M00L)
|
|
heltec_wireless_stick_V3.menu.LORAWAN_PREAMBLE_LENGTH.1.build.LORAWAN_PREAMBLE_LENGTH=16
|
|
|
|
heltec_wireless_stick_V3.menu.SLOW_CLK_TPYE.0=Internal (default)
|
|
heltec_wireless_stick_V3.menu.SLOW_CLK_TPYE.0.build.SLOW_CLK_TPYE=0
|
|
heltec_wireless_stick_V3.menu.SLOW_CLK_TPYE.1=External 32K
|
|
heltec_wireless_stick_V3.menu.SLOW_CLK_TPYE.1.build.SLOW_CLK_TPYE=1
|
|
|
|
heltec_wireless_stick_V3.build.defines=-D{build.band} -DMCU_ESP32_S3 -DHELTEC_BOARD=31 -DWIRELESS_STICK_V3 -DSLOW_CLK_TPYE={build.SLOW_CLK_TPYE} -DRADIO_CHIP_SX1262 -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} -DLORAWAN_PREAMBLE_LENGTH={build.LORAWAN_PREAMBLE_LENGTH} -DLORAWAN_DEVEUI_AUTO={build.LORAWAN_DEVEUI_AUTO} -D{build.board}
|
|
|
|
heltec_wireless_stick_V3.menu.EraseFlash.none=Disabled
|
|
heltec_wireless_stick_V3.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_wireless_stick_V3.menu.EraseFlash.all=Enabled
|
|
heltec_wireless_stick_V3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
heltec_wireless_stick_lite_V3.name=Heltec Wireless Stick Lite(V3)
|
|
|
|
heltec_wireless_stick_lite_V3.bootloader.tool=esptool_py
|
|
heltec_wireless_stick_lite_V3.bootloader.tool.default=esptool_py
|
|
|
|
heltec_wireless_stick_lite_V3.upload.tool=esptool_py
|
|
heltec_wireless_stick_lite_V3.upload.tool.default=esptool_py
|
|
heltec_wireless_stick_lite_V3.upload.tool.network=esp_ota
|
|
|
|
heltec_wireless_stick_lite_V3.upload.maximum_size=3342336
|
|
heltec_wireless_stick_lite_V3.upload.maximum_data_size=327680
|
|
heltec_wireless_stick_lite_V3.upload.flags=
|
|
heltec_wireless_stick_lite_V3.upload.extra_flags=
|
|
heltec_wireless_stick_lite_V3.upload.use_1200bps_touch=false
|
|
heltec_wireless_stick_lite_V3.upload.wait_for_upload_port=false
|
|
|
|
heltec_wireless_stick_lite_V3.serial.disableDTR=false
|
|
heltec_wireless_stick_lite_V3.serial.disableRTS=false
|
|
|
|
heltec_wireless_stick_lite_V3.build.tarch=xtensa
|
|
heltec_wireless_stick_lite_V3.build.bootloader_addr=0x0
|
|
heltec_wireless_stick_lite_V3.build.target=esp32s3
|
|
heltec_wireless_stick_lite_V3.build.mcu=esp32s3
|
|
heltec_wireless_stick_lite_V3.build.core=esp32
|
|
heltec_wireless_stick_lite_V3.build.variant=heltec_wireless_stick_lite_v3
|
|
heltec_wireless_stick_lite_V3.build.board=HELTEC_WIRELESS_STICK_LITE_V3
|
|
|
|
heltec_wireless_stick_lite_V3.build.usb_mode=1
|
|
heltec_wireless_stick_lite_V3.build.cdc_on_boot=0
|
|
heltec_wireless_stick_lite_V3.build.msc_on_boot=0
|
|
heltec_wireless_stick_lite_V3.build.dfu_on_boot=0
|
|
heltec_wireless_stick_lite_V3.build.f_cpu=240000000L
|
|
heltec_wireless_stick_lite_V3.build.flash_size=8MB
|
|
heltec_wireless_stick_lite_V3.build.flash_freq=80m
|
|
heltec_wireless_stick_lite_V3.build.flash_mode=dio
|
|
heltec_wireless_stick_lite_V3.build.boot=qio
|
|
heltec_wireless_stick_lite_V3.build.boot_freq=80m
|
|
heltec_wireless_stick_lite_V3.build.partitions=default_8MB
|
|
heltec_wireless_stick_lite_V3.build.loop_core=
|
|
heltec_wireless_stick_lite_V3.build.event_core=
|
|
heltec_wireless_stick_lite_V3.build.psram_type=qspi
|
|
heltec_wireless_stick_lite_V3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
heltec_wireless_stick_lite_V3.menu.LoopCore.1=Core 1
|
|
heltec_wireless_stick_lite_V3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
heltec_wireless_stick_lite_V3.menu.LoopCore.0=Core 0
|
|
heltec_wireless_stick_lite_V3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
heltec_wireless_stick_lite_V3.menu.EventsCore.1=Core 1
|
|
heltec_wireless_stick_lite_V3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
heltec_wireless_stick_lite_V3.menu.EventsCore.0=Core 0
|
|
heltec_wireless_stick_lite_V3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
heltec_wireless_stick_lite_V3.menu.CPUFreq.240=240MHz (WiFi)
|
|
heltec_wireless_stick_lite_V3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_wireless_stick_lite_V3.menu.CPUFreq.160=160MHz (WiFi)
|
|
heltec_wireless_stick_lite_V3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_wireless_stick_lite_V3.menu.CPUFreq.80=80MHz (WiFi)
|
|
heltec_wireless_stick_lite_V3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
heltec_wireless_stick_lite_V3.menu.CPUFreq.40=40MHz
|
|
heltec_wireless_stick_lite_V3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
heltec_wireless_stick_lite_V3.menu.CPUFreq.20=20MHz
|
|
heltec_wireless_stick_lite_V3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
heltec_wireless_stick_lite_V3.menu.CPUFreq.10=10MHz
|
|
heltec_wireless_stick_lite_V3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
heltec_wireless_stick_lite_V3.menu.UploadSpeed.921600=921600
|
|
heltec_wireless_stick_lite_V3.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_wireless_stick_lite_V3.menu.UploadSpeed.115200=115200
|
|
heltec_wireless_stick_lite_V3.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_wireless_stick_lite_V3.menu.UploadSpeed.256000.windows=256000
|
|
heltec_wireless_stick_lite_V3.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_wireless_stick_lite_V3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_wireless_stick_lite_V3.menu.UploadSpeed.230400=230400
|
|
heltec_wireless_stick_lite_V3.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_wireless_stick_lite_V3.menu.UploadSpeed.460800.linux=460800
|
|
heltec_wireless_stick_lite_V3.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_wireless_stick_lite_V3.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_wireless_stick_lite_V3.menu.UploadSpeed.512000.windows=512000
|
|
heltec_wireless_stick_lite_V3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_wireless_stick_lite_V3.menu.DebugLevel.none=None
|
|
heltec_wireless_stick_lite_V3.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_wireless_stick_lite_V3.menu.DebugLevel.error=Error
|
|
heltec_wireless_stick_lite_V3.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_wireless_stick_lite_V3.menu.DebugLevel.warn=Warn
|
|
heltec_wireless_stick_lite_V3.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_wireless_stick_lite_V3.menu.DebugLevel.info=Info
|
|
heltec_wireless_stick_lite_V3.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_wireless_stick_lite_V3.menu.DebugLevel.debug=Debug
|
|
heltec_wireless_stick_lite_V3.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_wireless_stick_lite_V3.menu.DebugLevel.verbose=Verbose
|
|
heltec_wireless_stick_lite_V3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.0=REGION_EU868
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.0.build.band=REGION_EU868
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.1=REGION_EU433
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.1.build.band=REGION_EU433
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.2=REGION_CN470
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.2.build.band=REGION_CN470
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.3=REGION_US915
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.3.build.band=REGION_US915
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.4=REGION_AU915
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.4.build.band=REGION_AU915
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.5=REGION_CN779
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.5.build.band=REGION_CN779
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.6=REGION_AS923
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.6.build.band=REGION_AS923
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.7=REGION_KR920
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.7.build.band=REGION_KR920
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.8=REGION_IN865
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.8.build.band=REGION_IN865
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
|
|
|
|
heltec_wireless_stick_lite_V3.menu.LoRaWanDebugLevel.0=None
|
|
heltec_wireless_stick_lite_V3.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
|
|
heltec_wireless_stick_lite_V3.menu.LoRaWanDebugLevel.1=Freq
|
|
heltec_wireless_stick_lite_V3.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
|
|
heltec_wireless_stick_lite_V3.menu.LoRaWanDebugLevel.2=Freq && DIO
|
|
heltec_wireless_stick_lite_V3.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
|
|
heltec_wireless_stick_lite_V3.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
|
|
heltec_wireless_stick_lite_V3.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
|
|
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_DEVEUI.0=CUSTOM
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_DEVEUI.0.build.LORAWAN_DEVEUI_AUTO=0
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_DEVEUI.1=Generate By ChipID
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_DEVEUI.1.build.LORAWAN_DEVEUI_AUTO=1
|
|
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_PREAMBLE_LENGTH.0=8(default)
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_PREAMBLE_LENGTH.0.build.LORAWAN_PREAMBLE_LENGTH=8
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_PREAMBLE_LENGTH.1=16(For M00 and M00L)
|
|
heltec_wireless_stick_lite_V3.menu.LORAWAN_PREAMBLE_LENGTH.1.build.LORAWAN_PREAMBLE_LENGTH=16
|
|
|
|
heltec_wireless_stick_lite_V3.menu.SLOW_CLK_TPYE.0=Internal (default)
|
|
heltec_wireless_stick_lite_V3.menu.SLOW_CLK_TPYE.0.build.SLOW_CLK_TPYE=0
|
|
heltec_wireless_stick_lite_V3.menu.SLOW_CLK_TPYE.1=External 32K
|
|
heltec_wireless_stick_lite_V3.menu.SLOW_CLK_TPYE.1.build.SLOW_CLK_TPYE=1
|
|
|
|
heltec_wireless_stick_lite_V3.build.defines=-D{build.band} -DMCU_ESP32_S3 -DHELTEC_BOARD=32 -DWIRELESS_STICK_LITE_V3 -DSLOW_CLK_TPYE={build.SLOW_CLK_TPYE} -DRADIO_CHIP_SX1262 -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} -DLORAWAN_PREAMBLE_LENGTH={build.LORAWAN_PREAMBLE_LENGTH} -DLORAWAN_DEVEUI_AUTO={build.LORAWAN_DEVEUI_AUTO} -D{build.board}
|
|
|
|
heltec_wireless_stick_lite_V3.menu.EraseFlash.none=Disabled
|
|
heltec_wireless_stick_lite_V3.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_wireless_stick_lite_V3.menu.EraseFlash.all=Enabled
|
|
heltec_wireless_stick_lite_V3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
heltec_wireless_shell_V3.name=Heltec Wireless Shell (V3)
|
|
|
|
heltec_wireless_shell_V3.bootloader.tool=esptool_py
|
|
heltec_wireless_shell_V3.bootloader.tool.default=esptool_py
|
|
|
|
heltec_wireless_shell_V3.upload.tool=esptool_py
|
|
heltec_wireless_shell_V3.upload.tool.default=esptool_py
|
|
heltec_wireless_shell_V3.upload.tool.network=esp_ota
|
|
|
|
heltec_wireless_shell_V3.upload.maximum_size=3342336
|
|
heltec_wireless_shell_V3.upload.maximum_data_size=327680
|
|
heltec_wireless_shell_V3.upload.flags=
|
|
heltec_wireless_shell_V3.upload.extra_flags=
|
|
heltec_wireless_shell_V3.upload.use_1200bps_touch=false
|
|
heltec_wireless_shell_V3.upload.wait_for_upload_port=false
|
|
|
|
heltec_wireless_shell_V3.serial.disableDTR=false
|
|
heltec_wireless_shell_V3.serial.disableRTS=false
|
|
|
|
heltec_wireless_shell_V3.build.tarch=xtensa
|
|
heltec_wireless_shell_V3.build.bootloader_addr=0x0
|
|
heltec_wireless_shell_V3.build.target=esp32s3
|
|
heltec_wireless_shell_V3.build.mcu=esp32s3
|
|
heltec_wireless_shell_V3.build.core=esp32
|
|
heltec_wireless_shell_V3.build.variant=heltec_wireless_shell_v3
|
|
heltec_wireless_shell_V3.build.board=HELTEC_WIRELESS_SHELL_V3
|
|
|
|
heltec_wireless_shell_V3.build.usb_mode=1
|
|
heltec_wireless_shell_V3.build.cdc_on_boot=0
|
|
heltec_wireless_shell_V3.build.msc_on_boot=0
|
|
heltec_wireless_shell_V3.build.dfu_on_boot=0
|
|
heltec_wireless_shell_V3.build.f_cpu=240000000L
|
|
heltec_wireless_shell_V3.build.flash_size=8MB
|
|
heltec_wireless_shell_V3.build.flash_freq=80m
|
|
heltec_wireless_shell_V3.build.flash_mode=dio
|
|
heltec_wireless_shell_V3.build.boot=qio
|
|
heltec_wireless_shell_V3.build.boot_freq=80m
|
|
heltec_wireless_shell_V3.build.partitions=default_8MB
|
|
heltec_wireless_shell_V3.build.loop_core=
|
|
heltec_wireless_shell_V3.build.event_core=
|
|
heltec_wireless_shell_V3.build.psram_type=qspi
|
|
heltec_wireless_shell_V3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
heltec_wireless_shell_V3.menu.LoopCore.1=Core 1
|
|
heltec_wireless_shell_V3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
heltec_wireless_shell_V3.menu.LoopCore.0=Core 0
|
|
heltec_wireless_shell_V3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
heltec_wireless_shell_V3.menu.EventsCore.1=Core 1
|
|
heltec_wireless_shell_V3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
heltec_wireless_shell_V3.menu.EventsCore.0=Core 0
|
|
heltec_wireless_shell_V3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
heltec_wireless_shell_V3.menu.CPUFreq.240=240MHz (WiFi)
|
|
heltec_wireless_shell_V3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_wireless_shell_V3.menu.CPUFreq.160=160MHz (WiFi)
|
|
heltec_wireless_shell_V3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_wireless_shell_V3.menu.CPUFreq.80=80MHz (WiFi)
|
|
heltec_wireless_shell_V3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
heltec_wireless_shell_V3.menu.CPUFreq.40=40MHz
|
|
heltec_wireless_shell_V3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
heltec_wireless_shell_V3.menu.CPUFreq.20=20MHz
|
|
heltec_wireless_shell_V3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
heltec_wireless_shell_V3.menu.CPUFreq.10=10MHz
|
|
heltec_wireless_shell_V3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
heltec_wireless_shell_V3.menu.UploadSpeed.921600=921600
|
|
heltec_wireless_shell_V3.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_wireless_shell_V3.menu.UploadSpeed.115200=115200
|
|
heltec_wireless_shell_V3.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_wireless_shell_V3.menu.UploadSpeed.256000.windows=256000
|
|
heltec_wireless_shell_V3.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_wireless_shell_V3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_wireless_shell_V3.menu.UploadSpeed.230400=230400
|
|
heltec_wireless_shell_V3.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_wireless_shell_V3.menu.UploadSpeed.460800.linux=460800
|
|
heltec_wireless_shell_V3.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_wireless_shell_V3.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_wireless_shell_V3.menu.UploadSpeed.512000.windows=512000
|
|
heltec_wireless_shell_V3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_wireless_shell_V3.menu.DebugLevel.none=None
|
|
heltec_wireless_shell_V3.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_wireless_shell_V3.menu.DebugLevel.error=Error
|
|
heltec_wireless_shell_V3.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_wireless_shell_V3.menu.DebugLevel.warn=Warn
|
|
heltec_wireless_shell_V3.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_wireless_shell_V3.menu.DebugLevel.info=Info
|
|
heltec_wireless_shell_V3.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_wireless_shell_V3.menu.DebugLevel.debug=Debug
|
|
heltec_wireless_shell_V3.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_wireless_shell_V3.menu.DebugLevel.verbose=Verbose
|
|
heltec_wireless_shell_V3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.0=REGION_EU868
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.0.build.band=REGION_EU868
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.1=REGION_EU433
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.1.build.band=REGION_EU433
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.2=REGION_CN470
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.2.build.band=REGION_CN470
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.3=REGION_US915
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.3.build.band=REGION_US915
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.4=REGION_AU915
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.4.build.band=REGION_AU915
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.5=REGION_CN779
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.5.build.band=REGION_CN779
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.6=REGION_AS923
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.6.build.band=REGION_AS923
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.7=REGION_KR920
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.7.build.band=REGION_KR920
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.8=REGION_IN865
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.8.build.band=REGION_IN865
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
|
|
heltec_wireless_shell_V3.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
|
|
|
|
heltec_wireless_shell_V3.menu.LoRaWanDebugLevel.0=None
|
|
heltec_wireless_shell_V3.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
|
|
heltec_wireless_shell_V3.menu.LoRaWanDebugLevel.1=Freq
|
|
heltec_wireless_shell_V3.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
|
|
heltec_wireless_shell_V3.menu.LoRaWanDebugLevel.2=Freq && DIO
|
|
heltec_wireless_shell_V3.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
|
|
heltec_wireless_shell_V3.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
|
|
heltec_wireless_shell_V3.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
|
|
|
|
heltec_wireless_shell_V3.menu.LORAWAN_DEVEUI.0=CUSTOM
|
|
heltec_wireless_shell_V3.menu.LORAWAN_DEVEUI.0.build.LORAWAN_DEVEUI_AUTO=0
|
|
heltec_wireless_shell_V3.menu.LORAWAN_DEVEUI.1=Generate By ChipID
|
|
heltec_wireless_shell_V3.menu.LORAWAN_DEVEUI.1.build.LORAWAN_DEVEUI_AUTO=1
|
|
|
|
heltec_wireless_shell_V3.menu.LORAWAN_PREAMBLE_LENGTH.0=8(default)
|
|
heltec_wireless_shell_V3.menu.LORAWAN_PREAMBLE_LENGTH.0.build.LORAWAN_PREAMBLE_LENGTH=8
|
|
heltec_wireless_shell_V3.menu.LORAWAN_PREAMBLE_LENGTH.1=16(For M00 and M00L)
|
|
heltec_wireless_shell_V3.menu.LORAWAN_PREAMBLE_LENGTH.1.build.LORAWAN_PREAMBLE_LENGTH=16
|
|
|
|
heltec_wireless_shell_V3.menu.SLOW_CLK_TPYE.0=Internal (default)
|
|
heltec_wireless_shell_V3.menu.SLOW_CLK_TPYE.0.build.SLOW_CLK_TPYE=0
|
|
heltec_wireless_shell_V3.menu.SLOW_CLK_TPYE.1=External 32K
|
|
heltec_wireless_shell_V3.menu.SLOW_CLK_TPYE.1.build.SLOW_CLK_TPYE=1
|
|
|
|
heltec_wireless_shell_V3.build.defines=-D{build.band} -DMCU_ESP32_S3 -DHELTEC_BOARD=33 -DWIRELESS_SHELL_V3 -DSLOW_CLK_TPYE={build.SLOW_CLK_TPYE} -DRADIO_CHIP_SX1262 -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} -DLORAWAN_PREAMBLE_LENGTH={build.LORAWAN_PREAMBLE_LENGTH} -DLORAWAN_DEVEUI_AUTO={build.LORAWAN_DEVEUI_AUTO} -D{build.board}
|
|
|
|
heltec_wireless_shell_V3.menu.EraseFlash.none=Disabled
|
|
heltec_wireless_shell_V3.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_wireless_shell_V3.menu.EraseFlash.all=Enabled
|
|
heltec_wireless_shell_V3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
heltec_capsule_sensor_V3.name=Heltec Capsule Sensor (V3)
|
|
|
|
heltec_capsule_sensor_V3.bootloader.tool=esptool_py
|
|
heltec_capsule_sensor_V3.bootloader.tool.default=esptool_py
|
|
|
|
heltec_capsule_sensor_V3.upload.tool=esptool_py
|
|
heltec_capsule_sensor_V3.upload.tool.default=esptool_py
|
|
heltec_capsule_sensor_V3.upload.tool.network=esp_ota
|
|
|
|
heltec_capsule_sensor_V3.upload.maximum_size=3342336
|
|
heltec_capsule_sensor_V3.upload.maximum_data_size=327680
|
|
heltec_capsule_sensor_V3.upload.flags=
|
|
heltec_capsule_sensor_V3.upload.extra_flags=
|
|
heltec_capsule_sensor_V3.upload.use_1200bps_touch=false
|
|
heltec_capsule_sensor_V3.upload.wait_for_upload_port=false
|
|
|
|
heltec_capsule_sensor_V3.serial.disableDTR=false
|
|
heltec_capsule_sensor_V3.serial.disableRTS=false
|
|
|
|
heltec_capsule_sensor_V3.build.tarch=xtensa
|
|
heltec_capsule_sensor_V3.build.bootloader_addr=0x0
|
|
heltec_capsule_sensor_V3.build.target=esp32s3
|
|
heltec_capsule_sensor_V3.build.mcu=esp32s3
|
|
heltec_capsule_sensor_V3.build.core=esp32
|
|
heltec_capsule_sensor_V3.build.variant=heltec_capsule_sensor_v3
|
|
heltec_capsule_sensor_V3.build.board=HELTEC_CAPSULE_SENSOR_V3
|
|
|
|
heltec_capsule_sensor_V3.build.usb_mode=1
|
|
heltec_capsule_sensor_V3.build.cdc_on_boot=0
|
|
heltec_capsule_sensor_V3.build.msc_on_boot=0
|
|
heltec_capsule_sensor_V3.build.dfu_on_boot=0
|
|
heltec_capsule_sensor_V3.build.f_cpu=240000000L
|
|
heltec_capsule_sensor_V3.build.flash_size=8MB
|
|
heltec_capsule_sensor_V3.build.flash_freq=80m
|
|
heltec_capsule_sensor_V3.build.flash_mode=dio
|
|
heltec_capsule_sensor_V3.build.boot=qio
|
|
heltec_capsule_sensor_V3.build.boot_freq=80m
|
|
heltec_capsule_sensor_V3.build.partitions=partitions
|
|
heltec_capsule_sensor_V3.build.loop_core=
|
|
heltec_capsule_sensor_V3.build.event_core=
|
|
heltec_capsule_sensor_V3.build.psram_type=qspi
|
|
heltec_capsule_sensor_V3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
heltec_capsule_sensor_V3.menu.LoopCore.1=Core 1
|
|
heltec_capsule_sensor_V3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
heltec_capsule_sensor_V3.menu.LoopCore.0=Core 0
|
|
heltec_capsule_sensor_V3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
heltec_capsule_sensor_V3.menu.EventsCore.1=Core 1
|
|
heltec_capsule_sensor_V3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
heltec_capsule_sensor_V3.menu.EventsCore.0=Core 0
|
|
heltec_capsule_sensor_V3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
heltec_capsule_sensor_V3.menu.CPUFreq.240=240MHz (WiFi)
|
|
heltec_capsule_sensor_V3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_capsule_sensor_V3.menu.CPUFreq.160=160MHz (WiFi)
|
|
heltec_capsule_sensor_V3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_capsule_sensor_V3.menu.CPUFreq.80=80MHz (WiFi)
|
|
heltec_capsule_sensor_V3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
heltec_capsule_sensor_V3.menu.CPUFreq.40=40MHz
|
|
heltec_capsule_sensor_V3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
heltec_capsule_sensor_V3.menu.CPUFreq.20=20MHz
|
|
heltec_capsule_sensor_V3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
heltec_capsule_sensor_V3.menu.CPUFreq.10=10MHz
|
|
heltec_capsule_sensor_V3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
heltec_capsule_sensor_V3.menu.UploadSpeed.921600=921600
|
|
heltec_capsule_sensor_V3.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_capsule_sensor_V3.menu.UploadSpeed.115200=115200
|
|
heltec_capsule_sensor_V3.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_capsule_sensor_V3.menu.UploadSpeed.256000.windows=256000
|
|
heltec_capsule_sensor_V3.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_capsule_sensor_V3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_capsule_sensor_V3.menu.UploadSpeed.230400=230400
|
|
heltec_capsule_sensor_V3.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_capsule_sensor_V3.menu.UploadSpeed.460800.linux=460800
|
|
heltec_capsule_sensor_V3.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_capsule_sensor_V3.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_capsule_sensor_V3.menu.UploadSpeed.512000.windows=512000
|
|
heltec_capsule_sensor_V3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_capsule_sensor_V3.menu.DebugLevel.none=None
|
|
heltec_capsule_sensor_V3.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_capsule_sensor_V3.menu.DebugLevel.error=Error
|
|
heltec_capsule_sensor_V3.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_capsule_sensor_V3.menu.DebugLevel.warn=Warn
|
|
heltec_capsule_sensor_V3.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_capsule_sensor_V3.menu.DebugLevel.info=Info
|
|
heltec_capsule_sensor_V3.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_capsule_sensor_V3.menu.DebugLevel.debug=Debug
|
|
heltec_capsule_sensor_V3.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_capsule_sensor_V3.menu.DebugLevel.verbose=Verbose
|
|
heltec_capsule_sensor_V3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.0=REGION_EU868
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.0.build.band=REGION_EU868
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.1=REGION_EU433
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.1.build.band=REGION_EU433
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.2=REGION_CN470
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.2.build.band=REGION_CN470
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.3=REGION_US915
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.3.build.band=REGION_US915
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.4=REGION_AU915
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.4.build.band=REGION_AU915
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.5=REGION_CN779
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.5.build.band=REGION_CN779
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.6=REGION_AS923
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.6.build.band=REGION_AS923
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.7=REGION_KR920
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.7.build.band=REGION_KR920
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.8=REGION_IN865
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.8.build.band=REGION_IN865
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
|
|
|
|
heltec_capsule_sensor_V3.menu.LoRaWanDebugLevel.0=None
|
|
heltec_capsule_sensor_V3.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
|
|
heltec_capsule_sensor_V3.menu.LoRaWanDebugLevel.1=Freq
|
|
heltec_capsule_sensor_V3.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
|
|
heltec_capsule_sensor_V3.menu.LoRaWanDebugLevel.2=Freq && DIO
|
|
heltec_capsule_sensor_V3.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
|
|
heltec_capsule_sensor_V3.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
|
|
heltec_capsule_sensor_V3.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
|
|
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_DEVEUI.0=CUSTOM
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_DEVEUI.0.build.LORAWAN_DEVEUI_AUTO=0
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_DEVEUI.1=Generate By ChipID
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_DEVEUI.1.build.LORAWAN_DEVEUI_AUTO=1
|
|
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_PREAMBLE_LENGTH.0=8(default)
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_PREAMBLE_LENGTH.0.build.LORAWAN_PREAMBLE_LENGTH=8
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_PREAMBLE_LENGTH.1=16(For M00 and M00L)
|
|
heltec_capsule_sensor_V3.menu.LORAWAN_PREAMBLE_LENGTH.1.build.LORAWAN_PREAMBLE_LENGTH=16
|
|
|
|
|
|
heltec_capsule_sensor_V3.menu.SLOW_CLK_TPYE.0=External 32K (default)
|
|
heltec_capsule_sensor_V3.menu.SLOW_CLK_TPYE.0.build.SLOW_CLK_TPYE=1
|
|
heltec_capsule_sensor_V3.menu.SLOW_CLK_TPYE.1=Internal
|
|
heltec_capsule_sensor_V3.menu.SLOW_CLK_TPYE.1.build.SLOW_CLK_TPYE=0
|
|
|
|
heltec_capsule_sensor_V3.menu.NetworkLogLevel.0=NONE
|
|
heltec_capsule_sensor_V3.menu.NetworkLogLevel.0.build.NetworkLogLevel=0
|
|
heltec_capsule_sensor_V3.menu.NetworkLogLevel.1=ERROR
|
|
heltec_capsule_sensor_V3.menu.NetworkLogLevel.1.build.NetworkLogLevel=1
|
|
heltec_capsule_sensor_V3.menu.NetworkLogLevel.2=WARN
|
|
heltec_capsule_sensor_V3.menu.NetworkLogLevel.2.build.NetworkLogLevel=2
|
|
heltec_capsule_sensor_V3.menu.NetworkLogLevel.3=INFO
|
|
heltec_capsule_sensor_V3.menu.NetworkLogLevel.3.build.NetworkLogLevel=3
|
|
|
|
heltec_capsule_sensor_V3.build.defines=-D{build.band} -DMCU_ESP32_S3 -DHELTEC_BOARD=50 -DCAPSULE_SENSOR_V3 -DSLOW_CLK_TPYE={build.SLOW_CLK_TPYE} -DRADIO_CHIP_SX1262 -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} -DLORAWAN_PREAMBLE_LENGTH={build.LORAWAN_PREAMBLE_LENGTH} -DLORAWAN_DEVEUI_AUTO={build.LORAWAN_DEVEUI_AUTO} -D{build.board} -DNLOG_LOCAL_LEVEL={build.NetworkLogLevel}
|
|
|
|
heltec_capsule_sensor_V3.menu.EraseFlash.none=Disabled
|
|
heltec_capsule_sensor_V3.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_capsule_sensor_V3.menu.EraseFlash.all=Enabled
|
|
heltec_capsule_sensor_V3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
#############################################################
|
|
|
|
heltec_wireless_paper.name=Heltec Wireless Paper
|
|
|
|
heltec_wireless_paper.bootloader.tool=esptool_py
|
|
heltec_wireless_paper.bootloader.tool.default=esptool_py
|
|
|
|
heltec_wireless_paper.upload.tool=esptool_py
|
|
heltec_wireless_paper.upload.tool.default=esptool_py
|
|
heltec_wireless_paper.upload.tool.network=esp_ota
|
|
|
|
heltec_wireless_paper.upload.maximum_size=4026368
|
|
heltec_wireless_paper.upload.maximum_data_size=327680
|
|
heltec_wireless_paper.upload.flags=
|
|
heltec_wireless_paper.upload.extra_flags=
|
|
heltec_wireless_paper.upload.use_1200bps_touch=false
|
|
heltec_wireless_paper.upload.wait_for_upload_port=false
|
|
|
|
heltec_wireless_paper.serial.disableDTR=false
|
|
heltec_wireless_paper.serial.disableRTS=false
|
|
|
|
heltec_wireless_paper.build.tarch=xtensa
|
|
heltec_wireless_paper.build.bootloader_addr=0x0
|
|
heltec_wireless_paper.build.target=esp32s3
|
|
heltec_wireless_paper.build.mcu=esp32s3
|
|
heltec_wireless_paper.build.core=esp32
|
|
heltec_wireless_paper.build.variant=heltec_wireless_paper
|
|
heltec_wireless_paper.build.board=HELTEC_WIRELESS_PAPER
|
|
|
|
heltec_wireless_paper.build.usb_mode=1
|
|
heltec_wireless_paper.build.cdc_on_boot=0
|
|
heltec_wireless_paper.build.msc_on_boot=0
|
|
heltec_wireless_paper.build.dfu_on_boot=0
|
|
heltec_wireless_paper.build.f_cpu=240000000L
|
|
heltec_wireless_paper.build.flash_size=8MB
|
|
heltec_wireless_paper.build.flash_freq=80m
|
|
heltec_wireless_paper.build.flash_mode=dio
|
|
heltec_wireless_paper.build.boot=qio
|
|
heltec_wireless_paper.build.boot_freq=80m
|
|
heltec_wireless_paper.build.partitions=default_8MB
|
|
heltec_wireless_paper.build.loop_core=
|
|
heltec_wireless_paper.build.event_core=
|
|
heltec_wireless_paper.build.psram_type=qspi
|
|
heltec_wireless_paper.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
heltec_wireless_paper.menu.LoopCore.1=Core 1
|
|
heltec_wireless_paper.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
heltec_wireless_paper.menu.LoopCore.0=Core 0
|
|
heltec_wireless_paper.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
heltec_wireless_paper.menu.EventsCore.1=Core 1
|
|
heltec_wireless_paper.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
heltec_wireless_paper.menu.EventsCore.0=Core 0
|
|
heltec_wireless_paper.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
heltec_wireless_paper.menu.CPUFreq.240=240MHz (WiFi)
|
|
heltec_wireless_paper.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_wireless_paper.menu.CPUFreq.160=160MHz (WiFi)
|
|
heltec_wireless_paper.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_wireless_paper.menu.CPUFreq.80=80MHz (WiFi)
|
|
heltec_wireless_paper.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
heltec_wireless_paper.menu.CPUFreq.40=40MHz
|
|
heltec_wireless_paper.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
heltec_wireless_paper.menu.CPUFreq.20=20MHz
|
|
heltec_wireless_paper.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
heltec_wireless_paper.menu.CPUFreq.10=10MHz
|
|
heltec_wireless_paper.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
heltec_wireless_paper.menu.UploadSpeed.921600=921600
|
|
heltec_wireless_paper.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_wireless_paper.menu.UploadSpeed.115200=115200
|
|
heltec_wireless_paper.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_wireless_paper.menu.UploadSpeed.256000.windows=256000
|
|
heltec_wireless_paper.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_wireless_paper.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_wireless_paper.menu.UploadSpeed.230400=230400
|
|
heltec_wireless_paper.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_wireless_paper.menu.UploadSpeed.460800.linux=460800
|
|
heltec_wireless_paper.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_wireless_paper.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_wireless_paper.menu.UploadSpeed.512000.windows=512000
|
|
heltec_wireless_paper.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_wireless_paper.menu.DebugLevel.none=None
|
|
heltec_wireless_paper.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_wireless_paper.menu.DebugLevel.error=Error
|
|
heltec_wireless_paper.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_wireless_paper.menu.DebugLevel.warn=Warn
|
|
heltec_wireless_paper.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_wireless_paper.menu.DebugLevel.info=Info
|
|
heltec_wireless_paper.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_wireless_paper.menu.DebugLevel.debug=Debug
|
|
heltec_wireless_paper.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_wireless_paper.menu.DebugLevel.verbose=Verbose
|
|
heltec_wireless_paper.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.0=REGION_EU868
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.0.build.band=REGION_EU868
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.1=REGION_EU433
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.1.build.band=REGION_EU433
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.2=REGION_CN470
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.2.build.band=REGION_CN470
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.3=REGION_US915
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.3.build.band=REGION_US915
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.4=REGION_AU915
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.4.build.band=REGION_AU915
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.5=REGION_CN779
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.5.build.band=REGION_CN779
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.6=REGION_AS923
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.6.build.band=REGION_AS923
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.7=REGION_KR920
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.7.build.band=REGION_KR920
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.8=REGION_IN865
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.8.build.band=REGION_IN865
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
|
|
heltec_wireless_paper.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
|
|
|
|
heltec_wireless_paper.menu.LoRaWanDebugLevel.0=None
|
|
heltec_wireless_paper.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
|
|
heltec_wireless_paper.menu.LoRaWanDebugLevel.1=Freq
|
|
heltec_wireless_paper.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
|
|
heltec_wireless_paper.menu.LoRaWanDebugLevel.2=Freq && DIO
|
|
heltec_wireless_paper.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
|
|
heltec_wireless_paper.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
|
|
heltec_wireless_paper.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
|
|
|
|
heltec_wireless_paper.menu.LORAWAN_DEVEUI.0=CUSTOM
|
|
heltec_wireless_paper.menu.LORAWAN_DEVEUI.0.build.LORAWAN_DEVEUI_AUTO=0
|
|
heltec_wireless_paper.menu.LORAWAN_DEVEUI.1=Generate By ChipID
|
|
heltec_wireless_paper.menu.LORAWAN_DEVEUI.1.build.LORAWAN_DEVEUI_AUTO=1
|
|
|
|
heltec_wireless_paper.menu.LORAWAN_PREAMBLE_LENGTH.0=8(default)
|
|
heltec_wireless_paper.menu.LORAWAN_PREAMBLE_LENGTH.0.build.LORAWAN_PREAMBLE_LENGTH=8
|
|
heltec_wireless_paper.menu.LORAWAN_PREAMBLE_LENGTH.1=16(For M00 and M00L)
|
|
heltec_wireless_paper.menu.LORAWAN_PREAMBLE_LENGTH.1.build.LORAWAN_PREAMBLE_LENGTH=16
|
|
|
|
heltec_wireless_paper.menu.SLOW_CLK_TPYE.0=Internal (default)
|
|
heltec_wireless_paper.menu.SLOW_CLK_TPYE.0.build.SLOW_CLK_TPYE=0
|
|
heltec_wireless_paper.menu.SLOW_CLK_TPYE.1=External 32K
|
|
heltec_wireless_paper.menu.SLOW_CLK_TPYE.1.build.SLOW_CLK_TPYE=1
|
|
|
|
heltec_wireless_paper.build.defines=-D{build.band} -DMCU_ESP32_S3 -DHELTEC_BOARD=60 -DWIRELESS_PAPER -DSLOW_CLK_TPYE={build.SLOW_CLK_TPYE} -DRADIO_CHIP_SX1262 -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} -DLORAWAN_PREAMBLE_LENGTH={build.LORAWAN_PREAMBLE_LENGTH} -DLORAWAN_DEVEUI_AUTO={build.LORAWAN_DEVEUI_AUTO} -D{build.board}
|
|
|
|
heltec_wireless_paper.menu.EraseFlash.none=Disabled
|
|
heltec_wireless_paper.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_wireless_paper.menu.EraseFlash.all=Enabled
|
|
heltec_wireless_paper.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
heltec_wireless_tracker.name=Heltec Wireless Tracker
|
|
|
|
heltec_wireless_tracker.bootloader.tool=esptool_py
|
|
heltec_wireless_tracker.bootloader.tool.default=esptool_py
|
|
|
|
heltec_wireless_tracker.upload.tool=esptool_py
|
|
heltec_wireless_tracker.upload.tool.default=esptool_py
|
|
heltec_wireless_tracker.upload.tool.network=esp_ota
|
|
|
|
heltec_wireless_tracker.upload.maximum_size=3342336
|
|
heltec_wireless_tracker.upload.maximum_data_size=327680
|
|
heltec_wireless_tracker.upload.flags=
|
|
heltec_wireless_tracker.upload.extra_flags=
|
|
heltec_wireless_tracker.upload.use_1200bps_touch=false
|
|
heltec_wireless_tracker.upload.wait_for_upload_port=false
|
|
|
|
heltec_wireless_tracker.serial.disableDTR=false
|
|
heltec_wireless_tracker.serial.disableRTS=false
|
|
|
|
heltec_wireless_tracker.build.tarch=xtensa
|
|
heltec_wireless_tracker.build.bootloader_addr=0x0
|
|
heltec_wireless_tracker.build.target=esp32s3
|
|
heltec_wireless_tracker.build.mcu=esp32s3
|
|
heltec_wireless_tracker.build.core=esp32
|
|
heltec_wireless_tracker.build.variant=heltec_wireless_tracker
|
|
heltec_wireless_tracker.build.board=HELTEC_WIRELESS_TRACKER
|
|
|
|
heltec_wireless_tracker.build.usb_mode=1
|
|
heltec_wireless_tracker.build.cdc_on_boot=0
|
|
heltec_wireless_tracker.build.msc_on_boot=0
|
|
heltec_wireless_tracker.build.dfu_on_boot=0
|
|
heltec_wireless_tracker.build.f_cpu=240000000L
|
|
heltec_wireless_tracker.build.flash_size=8MB
|
|
heltec_wireless_tracker.build.flash_freq=80m
|
|
heltec_wireless_tracker.build.flash_mode=dio
|
|
heltec_wireless_tracker.build.boot=qio
|
|
heltec_wireless_tracker.build.boot_freq=80m
|
|
heltec_wireless_tracker.build.partitions=default_8MB
|
|
heltec_wireless_tracker.build.loop_core=
|
|
heltec_wireless_tracker.build.event_core=
|
|
heltec_wireless_tracker.build.psram_type=qspi
|
|
heltec_wireless_tracker.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
heltec_wireless_tracker.menu.LoopCore.1=Core 1
|
|
heltec_wireless_tracker.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
heltec_wireless_tracker.menu.LoopCore.0=Core 0
|
|
heltec_wireless_tracker.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
heltec_wireless_tracker.menu.EventsCore.1=Core 1
|
|
heltec_wireless_tracker.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
heltec_wireless_tracker.menu.EventsCore.0=Core 0
|
|
heltec_wireless_tracker.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
heltec_wireless_tracker.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
heltec_wireless_tracker.menu.USBMode.hwcdc.build.usb_mode=1
|
|
heltec_wireless_tracker.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
heltec_wireless_tracker.menu.USBMode.default.build.usb_mode=0
|
|
|
|
heltec_wireless_tracker.menu.CDCOnBoot.default=Enabled
|
|
heltec_wireless_tracker.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
heltec_wireless_tracker.menu.CDCOnBoot.cdc=Disabled
|
|
heltec_wireless_tracker.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
|
|
|
|
heltec_wireless_tracker.menu.MSCOnBoot.default=Disabled
|
|
heltec_wireless_tracker.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
heltec_wireless_tracker.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
heltec_wireless_tracker.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
heltec_wireless_tracker.menu.DFUOnBoot.default=Disabled
|
|
heltec_wireless_tracker.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
heltec_wireless_tracker.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
heltec_wireless_tracker.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
heltec_wireless_tracker.menu.UploadMode.default=UART0 / Hardware CDC
|
|
heltec_wireless_tracker.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
heltec_wireless_tracker.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
heltec_wireless_tracker.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
heltec_wireless_tracker.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
heltec_wireless_tracker.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
heltec_wireless_tracker.menu.CPUFreq.240=240MHz (WiFi)
|
|
heltec_wireless_tracker.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_wireless_tracker.menu.CPUFreq.160=160MHz (WiFi)
|
|
heltec_wireless_tracker.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_wireless_tracker.menu.CPUFreq.80=80MHz (WiFi)
|
|
heltec_wireless_tracker.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
heltec_wireless_tracker.menu.CPUFreq.40=40MHz
|
|
heltec_wireless_tracker.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
heltec_wireless_tracker.menu.CPUFreq.20=20MHz
|
|
heltec_wireless_tracker.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
heltec_wireless_tracker.menu.CPUFreq.10=10MHz
|
|
heltec_wireless_tracker.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
heltec_wireless_tracker.menu.UploadSpeed.921600=921600
|
|
heltec_wireless_tracker.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_wireless_tracker.menu.UploadSpeed.115200=115200
|
|
heltec_wireless_tracker.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_wireless_tracker.menu.UploadSpeed.256000.windows=256000
|
|
heltec_wireless_tracker.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_wireless_tracker.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_wireless_tracker.menu.UploadSpeed.230400=230400
|
|
heltec_wireless_tracker.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_wireless_tracker.menu.UploadSpeed.460800.linux=460800
|
|
heltec_wireless_tracker.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_wireless_tracker.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_wireless_tracker.menu.UploadSpeed.512000.windows=512000
|
|
heltec_wireless_tracker.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_wireless_tracker.menu.DebugLevel.none=None
|
|
heltec_wireless_tracker.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_wireless_tracker.menu.DebugLevel.error=Error
|
|
heltec_wireless_tracker.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_wireless_tracker.menu.DebugLevel.warn=Warn
|
|
heltec_wireless_tracker.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_wireless_tracker.menu.DebugLevel.info=Info
|
|
heltec_wireless_tracker.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_wireless_tracker.menu.DebugLevel.debug=Debug
|
|
heltec_wireless_tracker.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_wireless_tracker.menu.DebugLevel.verbose=Verbose
|
|
heltec_wireless_tracker.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.0=REGION_EU868
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.0.build.band=REGION_EU868
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.1=REGION_EU433
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.1.build.band=REGION_EU433
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.2=REGION_CN470
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.2.build.band=REGION_CN470
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.3=REGION_US915
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.3.build.band=REGION_US915
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.4=REGION_AU915
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.4.build.band=REGION_AU915
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.5=REGION_CN779
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.5.build.band=REGION_CN779
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.6=REGION_AS923
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.6.build.band=REGION_AS923
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.7=REGION_KR920
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.7.build.band=REGION_KR920
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.8=REGION_IN865
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.8.build.band=REGION_IN865
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
|
|
heltec_wireless_tracker.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
|
|
|
|
heltec_wireless_tracker.menu.LoRaWanDebugLevel.0=None
|
|
heltec_wireless_tracker.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
|
|
heltec_wireless_tracker.menu.LoRaWanDebugLevel.1=Freq
|
|
heltec_wireless_tracker.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
|
|
heltec_wireless_tracker.menu.LoRaWanDebugLevel.2=Freq && DIO
|
|
heltec_wireless_tracker.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
|
|
heltec_wireless_tracker.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
|
|
heltec_wireless_tracker.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
|
|
|
|
heltec_wireless_tracker.menu.LORAWAN_DEVEUI.0=CUSTOM
|
|
heltec_wireless_tracker.menu.LORAWAN_DEVEUI.0.build.LORAWAN_DEVEUI_AUTO=0
|
|
heltec_wireless_tracker.menu.LORAWAN_DEVEUI.1=Generate By ChipID
|
|
heltec_wireless_tracker.menu.LORAWAN_DEVEUI.1.build.LORAWAN_DEVEUI_AUTO=1
|
|
|
|
heltec_wireless_tracker.menu.LORAWAN_PREAMBLE_LENGTH.0=8(default)
|
|
heltec_wireless_tracker.menu.LORAWAN_PREAMBLE_LENGTH.0.build.LORAWAN_PREAMBLE_LENGTH=8
|
|
heltec_wireless_tracker.menu.LORAWAN_PREAMBLE_LENGTH.1=16(For M00 and M00L)
|
|
heltec_wireless_tracker.menu.LORAWAN_PREAMBLE_LENGTH.1.build.LORAWAN_PREAMBLE_LENGTH=16
|
|
|
|
heltec_wireless_tracker.menu.SLOW_CLK_TPYE.0=Internal (default)
|
|
heltec_wireless_tracker.menu.SLOW_CLK_TPYE.0.build.SLOW_CLK_TPYE=0
|
|
heltec_wireless_tracker.menu.SLOW_CLK_TPYE.1=External 32K
|
|
heltec_wireless_tracker.menu.SLOW_CLK_TPYE.1.build.SLOW_CLK_TPYE=1
|
|
|
|
heltec_wireless_tracker.build.defines=-D{build.band} -DMCU_ESP32_S3 -DHELTEC_BOARD=34 -DWIRELESS_TRACKER -DSLOW_CLK_TPYE={build.SLOW_CLK_TPYE} -DRADIO_CHIP_SX1262 -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} -DLORAWAN_PREAMBLE_LENGTH={build.LORAWAN_PREAMBLE_LENGTH} -DLORAWAN_DEVEUI_AUTO={build.LORAWAN_DEVEUI_AUTO} -D{build.board}
|
|
|
|
heltec_wireless_tracker.menu.EraseFlash.none=Disabled
|
|
heltec_wireless_tracker.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_wireless_tracker.menu.EraseFlash.all=Enabled
|
|
heltec_wireless_tracker.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
heltec_wireless_mini_shell.name=Heltec Wireless Mini Shell
|
|
|
|
heltec_wireless_mini_shell.bootloader.tool=esptool_py
|
|
heltec_wireless_mini_shell.bootloader.tool.default=esptool_py
|
|
|
|
heltec_wireless_mini_shell.upload.tool=esptool_py
|
|
heltec_wireless_mini_shell.upload.tool.default=esptool_py
|
|
heltec_wireless_mini_shell.upload.tool.network=esp_ota
|
|
|
|
heltec_wireless_mini_shell.upload.maximum_size=1310720
|
|
heltec_wireless_mini_shell.upload.maximum_data_size=327680
|
|
heltec_wireless_mini_shell.upload.flags=
|
|
heltec_wireless_mini_shell.upload.extra_flags=
|
|
heltec_wireless_mini_shell.upload.use_1200bps_touch=false
|
|
heltec_wireless_mini_shell.upload.wait_for_upload_port=false
|
|
|
|
heltec_wireless_mini_shell.serial.disableDTR=false
|
|
heltec_wireless_mini_shell.serial.disableRTS=false
|
|
|
|
heltec_wireless_mini_shell.build.tarch=riscv32
|
|
heltec_wireless_mini_shell.build.target=esp
|
|
heltec_wireless_mini_shell.build.mcu=esp32c3
|
|
heltec_wireless_mini_shell.build.core=esp32
|
|
heltec_wireless_mini_shell.build.variant=heltec_wireless_mini_shell
|
|
heltec_wireless_mini_shell.build.board=HELTEC_WIRELESS_MINI_SHELL
|
|
heltec_wireless_mini_shell.build.bootloader_addr=0x0
|
|
|
|
heltec_wireless_mini_shell.build.cdc_on_boot=0
|
|
heltec_wireless_mini_shell.build.f_cpu=160000000L
|
|
heltec_wireless_mini_shell.build.flash_size=4MB
|
|
heltec_wireless_mini_shell.build.flash_freq=80m
|
|
heltec_wireless_mini_shell.build.flash_mode=dio
|
|
heltec_wireless_mini_shell.build.boot=qio
|
|
heltec_wireless_mini_shell.build.partitions=default
|
|
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.0=REGION_EU868
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.0.build.band=REGION_EU868
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.1=REGION_EU433
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.1.build.band=REGION_EU433
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.2=REGION_CN470
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.2.build.band=REGION_CN470
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.3=REGION_US915
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.3.build.band=REGION_US915
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.4=REGION_AU915
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.4.build.band=REGION_AU915
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.5=REGION_CN779
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.5.build.band=REGION_CN779
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.6=REGION_AS923
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.6.build.band=REGION_AS923
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.7=REGION_KR920
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.7.build.band=REGION_KR920
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.8=REGION_IN865
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.8.build.band=REGION_IN865
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
|
|
heltec_wireless_mini_shell.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
|
|
|
|
heltec_wireless_mini_shell.menu.CPUFreq.160=160MHz (WiFi)
|
|
heltec_wireless_mini_shell.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_wireless_mini_shell.menu.CPUFreq.80=80MHz (WiFi)
|
|
heltec_wireless_mini_shell.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
heltec_wireless_mini_shell.menu.CPUFreq.40=40MHz
|
|
heltec_wireless_mini_shell.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
heltec_wireless_mini_shell.menu.CPUFreq.20=20MHz
|
|
heltec_wireless_mini_shell.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
heltec_wireless_mini_shell.menu.CPUFreq.10=10MHz
|
|
heltec_wireless_mini_shell.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
heltec_wireless_mini_shell.menu.UploadSpeed.921600=921600
|
|
heltec_wireless_mini_shell.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_wireless_mini_shell.menu.UploadSpeed.115200=115200
|
|
heltec_wireless_mini_shell.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_wireless_mini_shell.menu.UploadSpeed.256000.windows=256000
|
|
heltec_wireless_mini_shell.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_wireless_mini_shell.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_wireless_mini_shell.menu.UploadSpeed.230400=230400
|
|
heltec_wireless_mini_shell.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_wireless_mini_shell.menu.UploadSpeed.460800.linux=460800
|
|
heltec_wireless_mini_shell.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_wireless_mini_shell.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_wireless_mini_shell.menu.UploadSpeed.512000.windows=512000
|
|
heltec_wireless_mini_shell.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_wireless_mini_shell.menu.DebugLevel.none=None
|
|
heltec_wireless_mini_shell.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_wireless_mini_shell.menu.DebugLevel.error=Error
|
|
heltec_wireless_mini_shell.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_wireless_mini_shell.menu.DebugLevel.warn=Warn
|
|
heltec_wireless_mini_shell.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_wireless_mini_shell.menu.DebugLevel.info=Info
|
|
heltec_wireless_mini_shell.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_wireless_mini_shell.menu.DebugLevel.debug=Debug
|
|
heltec_wireless_mini_shell.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_wireless_mini_shell.menu.DebugLevel.verbose=Verbose
|
|
heltec_wireless_mini_shell.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_wireless_mini_shell.menu.LoRaWanDebugLevel.0=None
|
|
heltec_wireless_mini_shell.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
|
|
heltec_wireless_mini_shell.menu.LoRaWanDebugLevel.1=Freq
|
|
heltec_wireless_mini_shell.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
|
|
heltec_wireless_mini_shell.menu.LoRaWanDebugLevel.2=Freq && DIO
|
|
heltec_wireless_mini_shell.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
|
|
heltec_wireless_mini_shell.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
|
|
heltec_wireless_mini_shell.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
|
|
|
|
|
|
heltec_wireless_mini_shell.menu.LORAWAN_DEVEUI.0=CUSTOM
|
|
heltec_wireless_mini_shell.menu.LORAWAN_DEVEUI.0.build.LORAWAN_DEVEUI_AUTO=0
|
|
heltec_wireless_mini_shell.menu.LORAWAN_DEVEUI.1=Generate By ChipID
|
|
heltec_wireless_mini_shell.menu.LORAWAN_DEVEUI.1.build.LORAWAN_DEVEUI_AUTO=1
|
|
|
|
heltec_wireless_mini_shell.menu.LORAWAN_PREAMBLE_LENGTH.0=8(default)
|
|
heltec_wireless_mini_shell.menu.LORAWAN_PREAMBLE_LENGTH.0.build.LORAWAN_PREAMBLE_LENGTH=8
|
|
heltec_wireless_mini_shell.menu.LORAWAN_PREAMBLE_LENGTH.1=16(For M00 and M00L)
|
|
heltec_wireless_mini_shell.menu.LORAWAN_PREAMBLE_LENGTH.1.build.LORAWAN_PREAMBLE_LENGTH=16
|
|
|
|
heltec_wireless_mini_shell.build.defines=-D{build.band} -DMCU_ESP32_C3 -DHELTEC_BOARD=70 -DWIRELESS_MINI_SHELL -DSLOW_CLK_TPYE=0 -DRADIO_CHIP_SX1262 -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} -DLORAWAN_PREAMBLE_LENGTH={build.LORAWAN_PREAMBLE_LENGTH} -DLORAWAN_DEVEUI_AUTO={build.LORAWAN_DEVEUI_AUTO} -D{build.board}
|
|
heltec_wireless_mini_shell.menu.EraseFlash.none=Disabled
|
|
heltec_wireless_mini_shell.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_wireless_mini_shell.menu.EraseFlash.all=Enabled
|
|
heltec_wireless_mini_shell.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
heltec_wireless_stick.name=Heltec Wireless Stick
|
|
|
|
heltec_wireless_stick.bootloader.tool=esptool_py
|
|
heltec_wireless_stick.bootloader.tool.default=esptool_py
|
|
|
|
heltec_wireless_stick.upload.tool=esptool_py
|
|
heltec_wireless_stick.upload.tool.default=esptool_py
|
|
heltec_wireless_stick.upload.tool.network=esp_ota
|
|
|
|
heltec_wireless_stick.upload.maximum_size=3342336
|
|
heltec_wireless_stick.upload.maximum_data_size=327680
|
|
heltec_wireless_stick.upload.flags=
|
|
heltec_wireless_stick.upload.extra_flags=
|
|
|
|
heltec_wireless_stick.serial.disableDTR=true
|
|
heltec_wireless_stick.serial.disableRTS=true
|
|
|
|
heltec_wireless_stick.build.tarch=xtensa
|
|
heltec_wireless_stick.build.bootloader_addr=0x1000
|
|
heltec_wireless_stick.build.target=esp32
|
|
heltec_wireless_stick.build.mcu=esp32
|
|
heltec_wireless_stick.build.core=esp32
|
|
heltec_wireless_stick.build.variant=heltec_wireless_stick
|
|
heltec_wireless_stick.build.board=HELTEC_WIRELESS_STICK
|
|
|
|
heltec_wireless_stick.build.f_cpu=240000000L
|
|
heltec_wireless_stick.build.flash_size=8MB
|
|
heltec_wireless_stick.build.flash_freq=80m
|
|
heltec_wireless_stick.build.flash_mode=dio
|
|
heltec_wireless_stick.build.boot=dio
|
|
heltec_wireless_stick.build.partitions=default_8MB
|
|
heltec_wireless_stick.build.build.psram=
|
|
heltec_wireless_stick.build.defines=-D{build.band} -DMCU_ESP32_D0 -DHELTEC_BOARD=2 -DWIRELESS_STICK -DSLOW_CLK_TPYE=0 -DRADIO_CHIP_SX127X -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} -DLORAWAN_PREAMBLE_LENGTH={build.LORAWAN_PREAMBLE_LENGTH} -DLORAWAN_DEVEUI_AUTO={build.LORAWAN_DEVEUI_AUTO} -D{build.board}
|
|
|
|
heltec_wireless_stick.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
heltec_wireless_stick.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_wireless_stick.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
heltec_wireless_stick.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_wireless_stick.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
heltec_wireless_stick.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
|
|
heltec_wireless_stick.menu.UploadSpeed.921600=921600
|
|
heltec_wireless_stick.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_wireless_stick.menu.UploadSpeed.115200=115200
|
|
heltec_wireless_stick.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_wireless_stick.menu.UploadSpeed.256000.windows=256000
|
|
heltec_wireless_stick.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_wireless_stick.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_wireless_stick.menu.UploadSpeed.230400=230400
|
|
heltec_wireless_stick.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_wireless_stick.menu.UploadSpeed.460800.linux=460800
|
|
heltec_wireless_stick.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_wireless_stick.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_wireless_stick.menu.UploadSpeed.512000.windows=512000
|
|
heltec_wireless_stick.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_wireless_stick.menu.DebugLevel.none=None
|
|
heltec_wireless_stick.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_wireless_stick.menu.DebugLevel.error=Error
|
|
heltec_wireless_stick.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_wireless_stick.menu.DebugLevel.warn=Warn
|
|
heltec_wireless_stick.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_wireless_stick.menu.DebugLevel.info=Info
|
|
heltec_wireless_stick.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_wireless_stick.menu.DebugLevel.debug=Debug
|
|
heltec_wireless_stick.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_wireless_stick.menu.DebugLevel.verbose=Verbose
|
|
heltec_wireless_stick.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.0=REGION_EU868
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.0.build.band=REGION_EU868
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.1=REGION_EU433
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.1.build.band=REGION_EU433
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.2=REGION_CN470
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.2.build.band=REGION_CN470
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.3=REGION_US915
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.3.build.band=REGION_US915
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.4=REGION_AU915
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.4.build.band=REGION_AU915
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.5=REGION_CN779
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.5.build.band=REGION_CN779
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.6=REGION_AS923
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.6.build.band=REGION_AS923
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.7=REGION_KR920
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.7.build.band=REGION_KR920
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.8=REGION_IN865
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.8.build.band=REGION_IN865
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
|
|
heltec_wireless_stick.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
|
|
|
|
heltec_wireless_stick.menu.LoRaWanDebugLevel.0=None
|
|
heltec_wireless_stick.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
|
|
heltec_wireless_stick.menu.LoRaWanDebugLevel.1=Freq
|
|
heltec_wireless_stick.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
|
|
heltec_wireless_stick.menu.LoRaWanDebugLevel.2=Freq && DIO
|
|
heltec_wireless_stick.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
|
|
heltec_wireless_stick.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
|
|
heltec_wireless_stick.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
|
|
|
|
heltec_wireless_stick.menu.LORAWAN_DEVEUI.0=CUSTOM
|
|
heltec_wireless_stick.menu.LORAWAN_DEVEUI.0.build.LORAWAN_DEVEUI_AUTO=0
|
|
heltec_wireless_stick.menu.LORAWAN_DEVEUI.1=Generate By ChipID
|
|
heltec_wireless_stick.menu.LORAWAN_DEVEUI.1.build.LORAWAN_DEVEUI_AUTO=1
|
|
|
|
heltec_wireless_stick.menu.LORAWAN_PREAMBLE_LENGTH.0=8(default)
|
|
heltec_wireless_stick.menu.LORAWAN_PREAMBLE_LENGTH.0.build.LORAWAN_PREAMBLE_LENGTH=8
|
|
heltec_wireless_stick.menu.LORAWAN_PREAMBLE_LENGTH.1=16(For M00 and M00L)
|
|
heltec_wireless_stick.menu.LORAWAN_PREAMBLE_LENGTH.1.build.LORAWAN_PREAMBLE_LENGTH=16
|
|
|
|
heltec_wireless_stick.menu.EraseFlash.none=Disabled
|
|
heltec_wireless_stick.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_wireless_stick.menu.EraseFlash.all=Enabled
|
|
heltec_wireless_stick.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
heltec_wireless_stick_lite.name=Heltec Wireless Stick Lite / Wireless Shell
|
|
|
|
heltec_wireless_stick_lite.bootloader.tool=esptool_py
|
|
heltec_wireless_stick_lite.bootloader.tool.default=esptool_py
|
|
|
|
heltec_wireless_stick_lite.upload.tool=esptool_py
|
|
heltec_wireless_stick_lite.upload.tool.default=esptool_py
|
|
heltec_wireless_stick_lite.upload.tool.network=esp_ota
|
|
|
|
heltec_wireless_stick_lite.upload.maximum_size=1310720
|
|
heltec_wireless_stick_lite.upload.maximum_data_size=327680
|
|
heltec_wireless_stick_lite.upload.flags=
|
|
heltec_wireless_stick_lite.upload.extra_flags=
|
|
|
|
heltec_wireless_stick_lite.serial.disableDTR=true
|
|
heltec_wireless_stick_lite.serial.disableRTS=true
|
|
|
|
heltec_wireless_stick_lite.build.tarch=xtensa
|
|
heltec_wireless_stick_lite.build.bootloader_addr=0x1000
|
|
heltec_wireless_stick_lite.build.target=esp32
|
|
heltec_wireless_stick_lite.build.mcu=esp32
|
|
heltec_wireless_stick_lite.build.core=esp32
|
|
heltec_wireless_stick_lite.build.variant=heltec_wireless_stick_lite
|
|
heltec_wireless_stick_lite.build.board=HELTEC_WIRELESS_STICK_LITE
|
|
|
|
heltec_wireless_stick_lite.build.f_cpu=240000000L
|
|
heltec_wireless_stick_lite.build.flash_size=4MB
|
|
heltec_wireless_stick_lite.build.flash_freq=80m
|
|
heltec_wireless_stick_lite.build.flash_mode=dio
|
|
heltec_wireless_stick_lite.build.boot=dio
|
|
heltec_wireless_stick_lite.build.partitions=default
|
|
heltec_wireless_stick_lite.build.psram=
|
|
heltec_wireless_stick_lite.build.defines=-D{build.band} -DMCU_ESP32_D0 -DHELTEC_BOARD=3 -DWIRELESS_STICK_LITE -DSLOW_CLK_TPYE=0 -DRADIO_CHIP_SX127X -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} -DLORAWAN_PREAMBLE_LENGTH={build.LORAWAN_PREAMBLE_LENGTH} -DLORAWAN_DEVEUI_AUTO={build.LORAWAN_DEVEUI_AUTO} -D{build.board}
|
|
|
|
heltec_wireless_stick_lite.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
heltec_wireless_stick_lite.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_wireless_stick_lite.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
heltec_wireless_stick_lite.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_wireless_stick_lite.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
heltec_wireless_stick_lite.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
|
|
heltec_wireless_stick_lite.menu.UploadSpeed.921600=921600
|
|
heltec_wireless_stick_lite.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_wireless_stick_lite.menu.UploadSpeed.115200=115200
|
|
heltec_wireless_stick_lite.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_wireless_stick_lite.menu.UploadSpeed.256000.windows=256000
|
|
heltec_wireless_stick_lite.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_wireless_stick_lite.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_wireless_stick_lite.menu.UploadSpeed.230400=230400
|
|
heltec_wireless_stick_lite.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_wireless_stick_lite.menu.UploadSpeed.460800.linux=460800
|
|
heltec_wireless_stick_lite.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_wireless_stick_lite.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_wireless_stick_lite.menu.UploadSpeed.512000.windows=512000
|
|
heltec_wireless_stick_lite.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_wireless_stick_lite.menu.DebugLevel.none=None
|
|
heltec_wireless_stick_lite.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_wireless_stick_lite.menu.DebugLevel.error=Error
|
|
heltec_wireless_stick_lite.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_wireless_stick_lite.menu.DebugLevel.warn=Warn
|
|
heltec_wireless_stick_lite.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_wireless_stick_lite.menu.DebugLevel.info=Info
|
|
heltec_wireless_stick_lite.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_wireless_stick_lite.menu.DebugLevel.debug=Debug
|
|
heltec_wireless_stick_lite.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_wireless_stick_lite.menu.DebugLevel.verbose=Verbose
|
|
heltec_wireless_stick_lite.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.0=REGION_EU868
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.0.build.band=REGION_EU868
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.1=REGION_EU433
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.1.build.band=REGION_EU433
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.2=REGION_CN470
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.2.build.band=REGION_CN470
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.3=REGION_US915
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.3.build.band=REGION_US915
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.4=REGION_AU915
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.4.build.band=REGION_AU915
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.5=REGION_CN779
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.5.build.band=REGION_CN779
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.6=REGION_AS923
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.6.build.band=REGION_AS923
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.7=REGION_KR920
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.7.build.band=REGION_KR920
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.8=REGION_IN865
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.8.build.band=REGION_IN865
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
|
|
heltec_wireless_stick_lite.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
|
|
|
|
heltec_wireless_stick_lite.menu.LoRaWanDebugLevel.0=None
|
|
heltec_wireless_stick_lite.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
|
|
heltec_wireless_stick_lite.menu.LoRaWanDebugLevel.1=Freq
|
|
heltec_wireless_stick_lite.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
|
|
heltec_wireless_stick_lite.menu.LoRaWanDebugLevel.2=Freq && DIO
|
|
heltec_wireless_stick_lite.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
|
|
heltec_wireless_stick_lite.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
|
|
heltec_wireless_stick_lite.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
|
|
|
|
heltec_wireless_stick_lite.menu.LORAWAN_DEVEUI.0=CUSTOM
|
|
heltec_wireless_stick_lite.menu.LORAWAN_DEVEUI.0.build.LORAWAN_DEVEUI_AUTO=0
|
|
heltec_wireless_stick_lite.menu.LORAWAN_DEVEUI.1=Generate By ChipID
|
|
heltec_wireless_stick_lite.menu.LORAWAN_DEVEUI.1.build.LORAWAN_DEVEUI_AUTO=1
|
|
|
|
heltec_wireless_stick_lite.menu.LORAWAN_PREAMBLE_LENGTH.0=8(default)
|
|
heltec_wireless_stick_lite.menu.LORAWAN_PREAMBLE_LENGTH.0.build.LORAWAN_PREAMBLE_LENGTH=8
|
|
heltec_wireless_stick_lite.menu.LORAWAN_PREAMBLE_LENGTH.1=16(For M00 and M00L)
|
|
heltec_wireless_stick_lite.menu.LORAWAN_PREAMBLE_LENGTH.1.build.LORAWAN_PREAMBLE_LENGTH=16
|
|
|
|
heltec_wireless_stick_lite.menu.EraseFlash.none=Disabled
|
|
heltec_wireless_stick_lite.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_wireless_stick_lite.menu.EraseFlash.all=Enabled
|
|
heltec_wireless_stick_lite.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
heltec_wireless_bridge.name=Heltec Wireless Bridge
|
|
|
|
heltec_wireless_bridge.bootloader.tool=esptool_py
|
|
heltec_wireless_bridge.bootloader.tool.default=esptool_py
|
|
|
|
heltec_wireless_bridge.upload.tool=esptool_py
|
|
heltec_wireless_bridge.upload.tool.default=esptool_py
|
|
heltec_wireless_bridge.upload.tool.network=esp_ota
|
|
|
|
heltec_wireless_bridge.upload.maximum_size=3342336
|
|
heltec_wireless_bridge.upload.maximum_data_size=327680
|
|
heltec_wireless_bridge.upload.wait_for_upload_port=true
|
|
heltec_wireless_bridge.upload.flags=
|
|
heltec_wireless_bridge.upload.extra_flags=
|
|
|
|
heltec_wireless_bridge.serial.disableDTR=true
|
|
heltec_wireless_bridge.serial.disableRTS=true
|
|
|
|
heltec_wireless_bridge.build.tarch=xtensa
|
|
heltec_wireless_bridge.build.bootloader_addr=0x1000
|
|
heltec_wireless_bridge.build.target=esp32
|
|
heltec_wireless_bridge.build.mcu=esp32
|
|
heltec_wireless_bridge.build.core=esp32
|
|
heltec_wireless_bridge.build.variant=heltec_wireless_bridge
|
|
heltec_wireless_bridge.build.board=HELTEC_WIRELESS_BRIDGE
|
|
|
|
heltec_wireless_bridge.build.f_cpu=240000000L
|
|
heltec_wireless_bridge.build.flash_size=8MB
|
|
heltec_wireless_bridge.build.flash_freq=80m
|
|
heltec_wireless_bridge.build.flash_mode=dio
|
|
heltec_wireless_bridge.build.boot=dio
|
|
heltec_wireless_bridge.build.partitions=default_8MB
|
|
heltec_wireless_bridge.build.psram=
|
|
heltec_wireless_bridge.build.psram_type=qspi
|
|
heltec_wireless_bridge.build.memory_type={build.boot}_{build.psram_type}
|
|
heltec_wireless_bridge.build.defines=-D{build.band} {build.psram_val} -DMCU_ESP32_D0 -DWIRELESS_BRIDGE -DHELTEC_BOARD=4 -DRADIO_CHIP_SX127X -DSLOW_CLK_TPYE=0 -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} -DLORAWAN_PREAMBLE_LENGTH={build.LORAWAN_PREAMBLE_LENGTH} -DLORAWAN_DEVEUI_AUTO={build.LORAWAN_DEVEUI_AUTO} {build.psram}
|
|
|
|
heltec_wireless_bridge.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
heltec_wireless_bridge.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_wireless_bridge.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
heltec_wireless_bridge.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_wireless_bridge.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
heltec_wireless_bridge.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
|
|
heltec_wireless_bridge.menu.UploadSpeed.921600=921600
|
|
heltec_wireless_bridge.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_wireless_bridge.menu.UploadSpeed.115200=115200
|
|
heltec_wireless_bridge.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_wireless_bridge.menu.UploadSpeed.256000.windows=256000
|
|
heltec_wireless_bridge.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_wireless_bridge.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_wireless_bridge.menu.UploadSpeed.230400=230400
|
|
heltec_wireless_bridge.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_wireless_bridge.menu.UploadSpeed.460800.linux=460800
|
|
heltec_wireless_bridge.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_wireless_bridge.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_wireless_bridge.menu.UploadSpeed.512000.windows=512000
|
|
heltec_wireless_bridge.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
|
|
heltec_wireless_bridge.menu.PSRAM.disabled=Disabled
|
|
heltec_wireless_bridge.menu.PSRAM.disabled.build.psram_val=
|
|
heltec_wireless_bridge.menu.PSRAM.disabled.build.psram_type=qspi
|
|
heltec_wireless_bridge.menu.PSRAM.enabled=QSPI PSRAM
|
|
heltec_wireless_bridge.menu.PSRAM.enabled.build.psram_val=-DBOARD_HAS_PSRAM
|
|
heltec_wireless_bridge.menu.PSRAM.enabled.build.psram_type=qspi
|
|
|
|
heltec_wireless_bridge.menu.DebugLevel.none=None
|
|
heltec_wireless_bridge.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_wireless_bridge.menu.DebugLevel.error=Error
|
|
heltec_wireless_bridge.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_wireless_bridge.menu.DebugLevel.warn=Warn
|
|
heltec_wireless_bridge.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_wireless_bridge.menu.DebugLevel.info=Info
|
|
heltec_wireless_bridge.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_wireless_bridge.menu.DebugLevel.debug=Debug
|
|
heltec_wireless_bridge.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_wireless_bridge.menu.DebugLevel.verbose=Verbose
|
|
heltec_wireless_bridge.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.0=REGION_EU868
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.0.build.band=REGION_EU868
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.1=REGION_EU433
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.1.build.band=REGION_EU433
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.2=REGION_CN470
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.2.build.band=REGION_CN470
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.3=REGION_US915
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.3.build.band=REGION_US915
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.4=REGION_AU915
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.4.build.band=REGION_AU915
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.5=REGION_CN779
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.5.build.band=REGION_CN779
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.6=REGION_AS923
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.6.build.band=REGION_AS923
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.7=REGION_KR920
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.7.build.band=REGION_KR920
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.8=REGION_IN865
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.8.build.band=REGION_IN865
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
|
|
heltec_wireless_bridge.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
|
|
|
|
heltec_wireless_bridge.menu.LoRaWanDebugLevel.0=None
|
|
heltec_wireless_bridge.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
|
|
heltec_wireless_bridge.menu.LoRaWanDebugLevel.1=Freq
|
|
heltec_wireless_bridge.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
|
|
heltec_wireless_bridge.menu.LoRaWanDebugLevel.2=Freq && DIO
|
|
heltec_wireless_bridge.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
|
|
heltec_wireless_bridge.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
|
|
heltec_wireless_bridge.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
|
|
|
|
heltec_wireless_bridge.menu.LORAWAN_DEVEUI.0=CUSTOM
|
|
heltec_wireless_bridge.menu.LORAWAN_DEVEUI.0.build.LORAWAN_DEVEUI_AUTO=0
|
|
heltec_wireless_bridge.menu.LORAWAN_DEVEUI.1=Generate By ChipID
|
|
heltec_wireless_bridge.menu.LORAWAN_DEVEUI.1.build.LORAWAN_DEVEUI_AUTO=1
|
|
|
|
heltec_wireless_bridge.menu.LORAWAN_PREAMBLE_LENGTH.0=8(default)
|
|
heltec_wireless_bridge.menu.LORAWAN_PREAMBLE_LENGTH.0.build.LORAWAN_PREAMBLE_LENGTH=8
|
|
heltec_wireless_bridge.menu.LORAWAN_PREAMBLE_LENGTH.1=16(For M00 and M00L)
|
|
heltec_wireless_bridge.menu.LORAWAN_PREAMBLE_LENGTH.1.build.LORAWAN_PREAMBLE_LENGTH=16
|
|
|
|
heltec_wireless_bridge.menu.EraseFlash.none=Disabled
|
|
heltec_wireless_bridge.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_wireless_bridge.menu.EraseFlash.all=Enabled
|
|
heltec_wireless_bridge.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
#############################################################
|
|
|
|
heltec_ht_de01.name=Heltec E-Ink Driver
|
|
|
|
heltec_ht_de01.bootloader.tool=esptool_py
|
|
heltec_ht_de01.bootloader.tool.default=esptool_py
|
|
|
|
heltec_ht_de01.upload.tool=esptool_py
|
|
heltec_ht_de01.upload.tool.default=esptool_py
|
|
heltec_ht_de01.upload.tool.network=esp_ota
|
|
|
|
heltec_ht_de01.upload.maximum_size=4026368
|
|
heltec_ht_de01.upload.maximum_data_size=327680
|
|
heltec_ht_de01.upload.flags=
|
|
heltec_ht_de01.upload.extra_flags=
|
|
heltec_ht_de01.upload.use_1200bps_touch=false
|
|
heltec_ht_de01.upload.wait_for_upload_port=false
|
|
|
|
heltec_ht_de01.serial.disableDTR=false
|
|
heltec_ht_de01.serial.disableRTS=false
|
|
|
|
heltec_ht_de01.build.tarch=xtensa
|
|
heltec_ht_de01.build.bootloader_addr=0x0
|
|
heltec_ht_de01.build.target=esp32s3
|
|
heltec_ht_de01.build.mcu=esp32s3
|
|
heltec_ht_de01.build.core=esp32
|
|
heltec_ht_de01.build.variant=heltec_ht_de01
|
|
heltec_ht_de01.build.board=HT_DE01
|
|
|
|
heltec_ht_de01.build.usb_mode=1
|
|
heltec_ht_de01.build.cdc_on_boot=0
|
|
heltec_ht_de01.build.msc_on_boot=0
|
|
heltec_ht_de01.build.dfu_on_boot=0
|
|
heltec_ht_de01.build.f_cpu=240000000L
|
|
heltec_ht_de01.build.flash_size=8MB
|
|
heltec_ht_de01.build.flash_freq=80m
|
|
heltec_ht_de01.build.flash_mode=dio
|
|
heltec_ht_de01.build.boot=qio
|
|
heltec_ht_de01.build.boot_freq=80m
|
|
heltec_ht_de01.build.partitions=default_8MB
|
|
heltec_ht_de01.build.loop_core=
|
|
heltec_ht_de01.build.event_core=
|
|
heltec_ht_de01.build.psram_type=qspi
|
|
heltec_ht_de01.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
heltec_ht_de01.menu.LoopCore.1=Core 1
|
|
heltec_ht_de01.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
heltec_ht_de01.menu.LoopCore.0=Core 0
|
|
heltec_ht_de01.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
heltec_ht_de01.menu.EventsCore.1=Core 1
|
|
heltec_ht_de01.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
heltec_ht_de01.menu.EventsCore.0=Core 0
|
|
heltec_ht_de01.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
heltec_ht_de01.menu.CPUFreq.240=240MHz (WiFi)
|
|
heltec_ht_de01.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_ht_de01.menu.CPUFreq.160=160MHz (WiFi)
|
|
heltec_ht_de01.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_ht_de01.menu.CPUFreq.80=80MHz (WiFi)
|
|
heltec_ht_de01.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
heltec_ht_de01.menu.CPUFreq.40=40MHz
|
|
heltec_ht_de01.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
heltec_ht_de01.menu.CPUFreq.20=20MHz
|
|
heltec_ht_de01.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
heltec_ht_de01.menu.CPUFreq.10=10MHz
|
|
heltec_ht_de01.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
heltec_ht_de01.menu.UploadSpeed.921600=921600
|
|
heltec_ht_de01.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_ht_de01.menu.UploadSpeed.115200=115200
|
|
heltec_ht_de01.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_ht_de01.menu.UploadSpeed.256000.windows=256000
|
|
heltec_ht_de01.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_ht_de01.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_ht_de01.menu.UploadSpeed.230400=230400
|
|
heltec_ht_de01.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_ht_de01.menu.UploadSpeed.460800.linux=460800
|
|
heltec_ht_de01.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_ht_de01.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_ht_de01.menu.UploadSpeed.512000.windows=512000
|
|
heltec_ht_de01.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_ht_de01.menu.DebugLevel.none=None
|
|
heltec_ht_de01.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_ht_de01.menu.DebugLevel.error=Error
|
|
heltec_ht_de01.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_ht_de01.menu.DebugLevel.warn=Warn
|
|
heltec_ht_de01.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_ht_de01.menu.DebugLevel.info=Info
|
|
heltec_ht_de01.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_ht_de01.menu.DebugLevel.debug=Debug
|
|
heltec_ht_de01.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_ht_de01.menu.DebugLevel.verbose=Verbose
|
|
heltec_ht_de01.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_ht_de01.menu.einksize.0=eink_150
|
|
heltec_ht_de01.menu.einksize.0.build.einksize=150;
|
|
heltec_ht_de01.menu.einksize.1=eink_154
|
|
heltec_ht_de01.menu.einksize.1.build.einksize=154;
|
|
heltec_ht_de01.menu.einksize.2=eink_213
|
|
heltec_ht_de01.menu.einksize.2.build.einksize=213;
|
|
heltec_ht_de01.menu.einksize.3=eink_290
|
|
heltec_ht_de01.menu.einksize.3.build.einksize=290;
|
|
|
|
heltec_ht_de01.build.defines= -DEINK={build.einksize} -D{build.board}
|
|
|
|
heltec_ht_de01.menu.EraseFlash.none=Disabled
|
|
heltec_ht_de01.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_ht_de01.menu.EraseFlash.all=Enabled
|
|
heltec_ht_de01.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
heltec_vision_master_e290.name=Heltec Vision Master E290
|
|
|
|
heltec_vision_master_e290.bootloader.tool=esptool_py
|
|
heltec_vision_master_e290.bootloader.tool.default=esptool_py
|
|
|
|
heltec_vision_master_e290.upload.tool=esptool_py
|
|
heltec_vision_master_e290.upload.tool.default=esptool_py
|
|
heltec_vision_master_e290.upload.tool.network=esp_ota
|
|
|
|
heltec_vision_master_e290.upload.maximum_size=3342336
|
|
heltec_vision_master_e290.upload.maximum_data_size=327680
|
|
heltec_vision_master_e290.upload.flags=
|
|
heltec_vision_master_e290.upload.extra_flags=
|
|
heltec_vision_master_e290.upload.use_1200bps_touch=false
|
|
heltec_vision_master_e290.upload.wait_for_upload_port=false
|
|
|
|
heltec_vision_master_e290.serial.disableDTR=false
|
|
heltec_vision_master_e290.serial.disableRTS=false
|
|
|
|
heltec_vision_master_e290.build.tarch=xtensa
|
|
heltec_vision_master_e290.build.bootloader_addr=0x0
|
|
heltec_vision_master_e290.build.target=esp32s3
|
|
heltec_vision_master_e290.build.mcu=esp32s3
|
|
heltec_vision_master_e290.build.core=esp32
|
|
heltec_vision_master_e290.build.variant=heltec_vision_master_e290
|
|
heltec_vision_master_e290.build.board=HELTEC_VISION_MASTER_E290
|
|
|
|
heltec_vision_master_e290.build.usb_mode=1
|
|
heltec_vision_master_e290.build.cdc_on_boot=0
|
|
heltec_vision_master_e290.build.msc_on_boot=0
|
|
heltec_vision_master_e290.build.dfu_on_boot=0
|
|
heltec_vision_master_e290.build.f_cpu=240000000L
|
|
heltec_vision_master_e290.build.flash_size=8MB
|
|
heltec_vision_master_e290.build.flash_freq=80m
|
|
heltec_vision_master_e290.build.flash_mode=dio
|
|
heltec_vision_master_e290.build.boot=qio
|
|
heltec_vision_master_e290.build.boot_freq=80m
|
|
heltec_vision_master_e290.build.partitions=default_8MB
|
|
heltec_vision_master_e290.build.loop_core=
|
|
heltec_vision_master_e290.build.event_core=
|
|
heltec_vision_master_e290.build.psram_type=qspi
|
|
heltec_vision_master_e290.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
heltec_vision_master_e290.menu.LoopCore.1=Core 1
|
|
heltec_vision_master_e290.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
heltec_vision_master_e290.menu.LoopCore.0=Core 0
|
|
heltec_vision_master_e290.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
heltec_vision_master_e290.menu.EventsCore.1=Core 1
|
|
heltec_vision_master_e290.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
heltec_vision_master_e290.menu.EventsCore.0=Core 0
|
|
heltec_vision_master_e290.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
heltec_vision_master_e290.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
heltec_vision_master_e290.menu.USBMode.hwcdc.build.usb_mode=1
|
|
heltec_vision_master_e290.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
heltec_vision_master_e290.menu.USBMode.default.build.usb_mode=0
|
|
|
|
heltec_vision_master_e290.menu.CDCOnBoot.default=Enabled
|
|
heltec_vision_master_e290.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
heltec_vision_master_e290.menu.CDCOnBoot.cdc=Disabled
|
|
heltec_vision_master_e290.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
|
|
|
|
heltec_vision_master_e290.menu.MSCOnBoot.default=Disabled
|
|
heltec_vision_master_e290.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
heltec_vision_master_e290.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
heltec_vision_master_e290.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
heltec_vision_master_e290.menu.DFUOnBoot.default=Disabled
|
|
heltec_vision_master_e290.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
heltec_vision_master_e290.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
heltec_vision_master_e290.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
heltec_vision_master_e290.menu.UploadMode.default=UART0 / Hardware CDC
|
|
heltec_vision_master_e290.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
heltec_vision_master_e290.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
heltec_vision_master_e290.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
heltec_vision_master_e290.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
heltec_vision_master_e290.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
heltec_vision_master_e290.menu.CPUFreq.240=240MHz (WiFi)
|
|
heltec_vision_master_e290.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_vision_master_e290.menu.CPUFreq.160=160MHz (WiFi)
|
|
heltec_vision_master_e290.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_vision_master_e290.menu.CPUFreq.80=80MHz (WiFi)
|
|
heltec_vision_master_e290.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
heltec_vision_master_e290.menu.CPUFreq.40=40MHz
|
|
heltec_vision_master_e290.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
heltec_vision_master_e290.menu.CPUFreq.20=20MHz
|
|
heltec_vision_master_e290.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
heltec_vision_master_e290.menu.CPUFreq.10=10MHz
|
|
heltec_vision_master_e290.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
heltec_vision_master_e290.menu.UploadSpeed.921600=921600
|
|
heltec_vision_master_e290.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_vision_master_e290.menu.UploadSpeed.115200=115200
|
|
heltec_vision_master_e290.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_vision_master_e290.menu.UploadSpeed.256000.windows=256000
|
|
heltec_vision_master_e290.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_vision_master_e290.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_vision_master_e290.menu.UploadSpeed.230400=230400
|
|
heltec_vision_master_e290.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_vision_master_e290.menu.UploadSpeed.460800.linux=460800
|
|
heltec_vision_master_e290.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_vision_master_e290.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_vision_master_e290.menu.UploadSpeed.512000.windows=512000
|
|
heltec_vision_master_e290.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_vision_master_e290.menu.DebugLevel.none=None
|
|
heltec_vision_master_e290.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_vision_master_e290.menu.DebugLevel.error=Error
|
|
heltec_vision_master_e290.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_vision_master_e290.menu.DebugLevel.warn=Warn
|
|
heltec_vision_master_e290.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_vision_master_e290.menu.DebugLevel.info=Info
|
|
heltec_vision_master_e290.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_vision_master_e290.menu.DebugLevel.debug=Debug
|
|
heltec_vision_master_e290.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_vision_master_e290.menu.DebugLevel.verbose=Verbose
|
|
heltec_vision_master_e290.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.0=REGION_EU868
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.0.build.band=REGION_EU868
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.1=REGION_EU433
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.1.build.band=REGION_EU433
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.2=REGION_CN470
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.2.build.band=REGION_CN470
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.3=REGION_US915
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.3.build.band=REGION_US915
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.4=REGION_AU915
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.4.build.band=REGION_AU915
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.5=REGION_CN779
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.5.build.band=REGION_CN779
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.6=REGION_AS923
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.6.build.band=REGION_AS923
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.7=REGION_KR920
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.7.build.band=REGION_KR920
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.8=REGION_IN865
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.8.build.band=REGION_IN865
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
|
|
heltec_vision_master_e290.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
|
|
|
|
heltec_vision_master_e290.menu.LoRaWanDebugLevel.0=None
|
|
heltec_vision_master_e290.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
|
|
heltec_vision_master_e290.menu.LoRaWanDebugLevel.1=Freq
|
|
heltec_vision_master_e290.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
|
|
heltec_vision_master_e290.menu.LoRaWanDebugLevel.2=Freq && DIO
|
|
heltec_vision_master_e290.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
|
|
heltec_vision_master_e290.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
|
|
heltec_vision_master_e290.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
|
|
|
|
heltec_vision_master_e290.menu.LORAWAN_DEVEUI.0=CUSTOM
|
|
heltec_vision_master_e290.menu.LORAWAN_DEVEUI.0.build.LORAWAN_DEVEUI_AUTO=0
|
|
heltec_vision_master_e290.menu.LORAWAN_DEVEUI.1=Generate By ChipID
|
|
heltec_vision_master_e290.menu.LORAWAN_DEVEUI.1.build.LORAWAN_DEVEUI_AUTO=1
|
|
|
|
heltec_vision_master_e290.menu.LORAWAN_PREAMBLE_LENGTH.0=8(default)
|
|
heltec_vision_master_e290.menu.LORAWAN_PREAMBLE_LENGTH.0.build.LORAWAN_PREAMBLE_LENGTH=8
|
|
heltec_vision_master_e290.menu.LORAWAN_PREAMBLE_LENGTH.1=16(For M00 and M00L)
|
|
heltec_vision_master_e290.menu.LORAWAN_PREAMBLE_LENGTH.1.build.LORAWAN_PREAMBLE_LENGTH=16
|
|
|
|
heltec_vision_master_e290.menu.SLOW_CLK_TPYE.0=Internal (default)
|
|
heltec_vision_master_e290.menu.SLOW_CLK_TPYE.0.build.SLOW_CLK_TPYE=0
|
|
heltec_vision_master_e290.menu.SLOW_CLK_TPYE.1=External 32K
|
|
heltec_vision_master_e290.menu.SLOW_CLK_TPYE.1.build.SLOW_CLK_TPYE=1
|
|
|
|
heltec_vision_master_e290.build.defines=-D{build.band} -DMCU_ESP32_S3 -DHELTEC_BOARD=37 -DHELTEC_VISION_MASTER_E290 -DSLOW_CLK_TPYE={build.SLOW_CLK_TPYE} -DRADIO_CHIP_SX1262 -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} -DLORAWAN_PREAMBLE_LENGTH={build.LORAWAN_PREAMBLE_LENGTH} -DLORAWAN_DEVEUI_AUTO={build.LORAWAN_DEVEUI_AUTO} -D{build.board}
|
|
|
|
heltec_vision_master_e290.menu.EraseFlash.none=Disabled
|
|
heltec_vision_master_e290.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_vision_master_e290.menu.EraseFlash.all=Enabled
|
|
heltec_vision_master_e290.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
heltec_vision_master_t190.name=Heltec Vision Master T190
|
|
|
|
heltec_vision_master_t190.bootloader.tool=esptool_py
|
|
heltec_vision_master_t190.bootloader.tool.default=esptool_py
|
|
|
|
heltec_vision_master_t190.upload.tool=esptool_py
|
|
heltec_vision_master_t190.upload.tool.default=esptool_py
|
|
heltec_vision_master_t190.upload.tool.network=esp_ota
|
|
|
|
heltec_vision_master_t190.upload.maximum_size=3342336
|
|
heltec_vision_master_t190.upload.maximum_data_size=327680
|
|
heltec_vision_master_t190.upload.flags=
|
|
heltec_vision_master_t190.upload.extra_flags=
|
|
heltec_vision_master_t190.upload.use_1200bps_touch=false
|
|
heltec_vision_master_t190.upload.wait_for_upload_port=false
|
|
|
|
heltec_vision_master_t190.serial.disableDTR=false
|
|
heltec_vision_master_t190.serial.disableRTS=false
|
|
|
|
heltec_vision_master_t190.build.tarch=xtensa
|
|
heltec_vision_master_t190.build.bootloader_addr=0x0
|
|
heltec_vision_master_t190.build.target=esp32s3
|
|
heltec_vision_master_t190.build.mcu=esp32s3
|
|
heltec_vision_master_t190.build.core=esp32
|
|
heltec_vision_master_t190.build.variant=heltec_vision_master_t190
|
|
heltec_vision_master_t190.build.board=HELTEC_VISION_MASTER_T190
|
|
|
|
heltec_vision_master_t190.build.usb_mode=1
|
|
heltec_vision_master_t190.build.cdc_on_boot=0
|
|
heltec_vision_master_t190.build.msc_on_boot=0
|
|
heltec_vision_master_t190.build.dfu_on_boot=0
|
|
heltec_vision_master_t190.build.f_cpu=240000000L
|
|
heltec_vision_master_t190.build.flash_size=8MB
|
|
heltec_vision_master_t190.build.flash_freq=80m
|
|
heltec_vision_master_t190.build.flash_mode=dio
|
|
heltec_vision_master_t190.build.boot=qio
|
|
heltec_vision_master_t190.build.boot_freq=80m
|
|
heltec_vision_master_t190.build.partitions=default_8MB
|
|
heltec_vision_master_t190.build.loop_core=
|
|
heltec_vision_master_t190.build.event_core=
|
|
heltec_vision_master_t190.build.psram_type=qspi
|
|
heltec_vision_master_t190.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
heltec_vision_master_t190.menu.LoopCore.1=Core 1
|
|
heltec_vision_master_t190.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
heltec_vision_master_t190.menu.LoopCore.0=Core 0
|
|
heltec_vision_master_t190.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
heltec_vision_master_t190.menu.EventsCore.1=Core 1
|
|
heltec_vision_master_t190.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
heltec_vision_master_t190.menu.EventsCore.0=Core 0
|
|
heltec_vision_master_t190.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
heltec_vision_master_t190.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
heltec_vision_master_t190.menu.USBMode.hwcdc.build.usb_mode=1
|
|
heltec_vision_master_t190.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
heltec_vision_master_t190.menu.USBMode.default.build.usb_mode=0
|
|
|
|
heltec_vision_master_t190.menu.CDCOnBoot.default=Enabled
|
|
heltec_vision_master_t190.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
heltec_vision_master_t190.menu.CDCOnBoot.cdc=Disabled
|
|
heltec_vision_master_t190.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
|
|
|
|
heltec_vision_master_t190.menu.MSCOnBoot.default=Disabled
|
|
heltec_vision_master_t190.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
heltec_vision_master_t190.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
heltec_vision_master_t190.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
heltec_vision_master_t190.menu.DFUOnBoot.default=Disabled
|
|
heltec_vision_master_t190.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
heltec_vision_master_t190.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
heltec_vision_master_t190.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
heltec_vision_master_t190.menu.UploadMode.default=UART0 / Hardware CDC
|
|
heltec_vision_master_t190.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
heltec_vision_master_t190.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
heltec_vision_master_t190.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
heltec_vision_master_t190.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
heltec_vision_master_t190.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
heltec_vision_master_t190.menu.CPUFreq.240=240MHz (WiFi)
|
|
heltec_vision_master_t190.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_vision_master_t190.menu.CPUFreq.160=160MHz (WiFi)
|
|
heltec_vision_master_t190.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_vision_master_t190.menu.CPUFreq.80=80MHz (WiFi)
|
|
heltec_vision_master_t190.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
heltec_vision_master_t190.menu.CPUFreq.40=40MHz
|
|
heltec_vision_master_t190.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
heltec_vision_master_t190.menu.CPUFreq.20=20MHz
|
|
heltec_vision_master_t190.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
heltec_vision_master_t190.menu.CPUFreq.10=10MHz
|
|
heltec_vision_master_t190.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
heltec_vision_master_t190.menu.UploadSpeed.921600=921600
|
|
heltec_vision_master_t190.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_vision_master_t190.menu.UploadSpeed.115200=115200
|
|
heltec_vision_master_t190.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_vision_master_t190.menu.UploadSpeed.256000.windows=256000
|
|
heltec_vision_master_t190.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_vision_master_t190.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_vision_master_t190.menu.UploadSpeed.230400=230400
|
|
heltec_vision_master_t190.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_vision_master_t190.menu.UploadSpeed.460800.linux=460800
|
|
heltec_vision_master_t190.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_vision_master_t190.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_vision_master_t190.menu.UploadSpeed.512000.windows=512000
|
|
heltec_vision_master_t190.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_vision_master_t190.menu.DebugLevel.none=None
|
|
heltec_vision_master_t190.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_vision_master_t190.menu.DebugLevel.error=Error
|
|
heltec_vision_master_t190.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_vision_master_t190.menu.DebugLevel.warn=Warn
|
|
heltec_vision_master_t190.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_vision_master_t190.menu.DebugLevel.info=Info
|
|
heltec_vision_master_t190.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_vision_master_t190.menu.DebugLevel.debug=Debug
|
|
heltec_vision_master_t190.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_vision_master_t190.menu.DebugLevel.verbose=Verbose
|
|
heltec_vision_master_t190.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.0=REGION_EU868
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.0.build.band=REGION_EU868
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.1=REGION_EU433
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.1.build.band=REGION_EU433
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.2=REGION_CN470
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.2.build.band=REGION_CN470
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.3=REGION_US915
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.3.build.band=REGION_US915
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.4=REGION_AU915
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.4.build.band=REGION_AU915
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.5=REGION_CN779
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.5.build.band=REGION_CN779
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.6=REGION_AS923
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.6.build.band=REGION_AS923
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.7=REGION_KR920
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.7.build.band=REGION_KR920
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.8=REGION_IN865
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.8.build.band=REGION_IN865
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
|
|
heltec_vision_master_t190.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
|
|
|
|
heltec_vision_master_t190.menu.LoRaWanDebugLevel.0=None
|
|
heltec_vision_master_t190.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
|
|
heltec_vision_master_t190.menu.LoRaWanDebugLevel.1=Freq
|
|
heltec_vision_master_t190.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
|
|
heltec_vision_master_t190.menu.LoRaWanDebugLevel.2=Freq && DIO
|
|
heltec_vision_master_t190.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
|
|
heltec_vision_master_t190.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
|
|
heltec_vision_master_t190.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
|
|
|
|
heltec_vision_master_t190.menu.LORAWAN_DEVEUI.0=CUSTOM
|
|
heltec_vision_master_t190.menu.LORAWAN_DEVEUI.0.build.LORAWAN_DEVEUI_AUTO=0
|
|
heltec_vision_master_t190.menu.LORAWAN_DEVEUI.1=Generate By ChipID
|
|
heltec_vision_master_t190.menu.LORAWAN_DEVEUI.1.build.LORAWAN_DEVEUI_AUTO=1
|
|
|
|
heltec_vision_master_t190.menu.LORAWAN_PREAMBLE_LENGTH.0=8(default)
|
|
heltec_vision_master_t190.menu.LORAWAN_PREAMBLE_LENGTH.0.build.LORAWAN_PREAMBLE_LENGTH=8
|
|
heltec_vision_master_t190.menu.LORAWAN_PREAMBLE_LENGTH.1=16(For M00 and M00L)
|
|
heltec_vision_master_t190.menu.LORAWAN_PREAMBLE_LENGTH.1.build.LORAWAN_PREAMBLE_LENGTH=16
|
|
|
|
heltec_vision_master_t190.menu.SLOW_CLK_TPYE.0=Internal (default)
|
|
heltec_vision_master_t190.menu.SLOW_CLK_TPYE.0.build.SLOW_CLK_TPYE=0
|
|
heltec_vision_master_t190.menu.SLOW_CLK_TPYE.1=External 32K
|
|
heltec_vision_master_t190.menu.SLOW_CLK_TPYE.1.build.SLOW_CLK_TPYE=1
|
|
|
|
heltec_vision_master_t190.build.defines=-D{build.band} -DMCU_ESP32_S3 -DHELTEC_BOARD=38 -DHELTEC_VISION_MASTER_T190 -DSLOW_CLK_TPYE={build.SLOW_CLK_TPYE} -DRADIO_CHIP_SX1262 -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} -DLORAWAN_PREAMBLE_LENGTH={build.LORAWAN_PREAMBLE_LENGTH} -DLORAWAN_DEVEUI_AUTO={build.LORAWAN_DEVEUI_AUTO} -D{build.board}
|
|
|
|
heltec_vision_master_t190.menu.EraseFlash.none=Disabled
|
|
heltec_vision_master_t190.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_vision_master_t190.menu.EraseFlash.all=Enabled
|
|
heltec_vision_master_t190.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
heltec_vision_master_e_213.name=Heltec Vision Master E213
|
|
|
|
heltec_vision_master_e_213.bootloader.tool=esptool_py
|
|
heltec_vision_master_e_213.bootloader.tool.default=esptool_py
|
|
|
|
heltec_vision_master_e_213.upload.tool=esptool_py
|
|
heltec_vision_master_e_213.upload.tool.default=esptool_py
|
|
heltec_vision_master_e_213.upload.tool.network=esp_ota
|
|
|
|
heltec_vision_master_e_213.upload.maximum_size=3342336
|
|
heltec_vision_master_e_213.upload.maximum_data_size=327680
|
|
heltec_vision_master_e_213.upload.flags=
|
|
heltec_vision_master_e_213.upload.extra_flags=
|
|
heltec_vision_master_e_213.upload.use_1200bps_touch=false
|
|
heltec_vision_master_e_213.upload.wait_for_upload_port=false
|
|
|
|
heltec_vision_master_e_213.serial.disableDTR=false
|
|
heltec_vision_master_e_213.serial.disableRTS=false
|
|
|
|
heltec_vision_master_e_213.build.tarch=xtensa
|
|
heltec_vision_master_e_213.build.bootloader_addr=0x0
|
|
heltec_vision_master_e_213.build.target=esp32s3
|
|
heltec_vision_master_e_213.build.mcu=esp32s3
|
|
heltec_vision_master_e_213.build.core=esp32
|
|
heltec_vision_master_e_213.build.variant=heltec_vision_master_e_213
|
|
heltec_vision_master_e_213.build.board=HELTEC_VISION_MASTER_E_213
|
|
|
|
heltec_vision_master_e_213.build.usb_mode=1
|
|
heltec_vision_master_e_213.build.cdc_on_boot=0
|
|
heltec_vision_master_e_213.build.msc_on_boot=0
|
|
heltec_vision_master_e_213.build.dfu_on_boot=0
|
|
heltec_vision_master_e_213.build.f_cpu=240000000L
|
|
heltec_vision_master_e_213.build.flash_size=8MB
|
|
heltec_vision_master_e_213.build.flash_freq=80m
|
|
heltec_vision_master_e_213.build.flash_mode=dio
|
|
heltec_vision_master_e_213.build.boot=qio
|
|
heltec_vision_master_e_213.build.boot_freq=80m
|
|
heltec_vision_master_e_213.build.partitions=default_8MB
|
|
heltec_vision_master_e_213.build.loop_core=
|
|
heltec_vision_master_e_213.build.event_core=
|
|
heltec_vision_master_e_213.build.psram_type=qspi
|
|
heltec_vision_master_e_213.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
heltec_vision_master_e_213.menu.LoopCore.1=Core 1
|
|
heltec_vision_master_e_213.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
heltec_vision_master_e_213.menu.LoopCore.0=Core 0
|
|
heltec_vision_master_e_213.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
heltec_vision_master_e_213.menu.EventsCore.1=Core 1
|
|
heltec_vision_master_e_213.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
heltec_vision_master_e_213.menu.EventsCore.0=Core 0
|
|
heltec_vision_master_e_213.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
heltec_vision_master_e_213.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
heltec_vision_master_e_213.menu.USBMode.hwcdc.build.usb_mode=1
|
|
heltec_vision_master_e_213.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
heltec_vision_master_e_213.menu.USBMode.default.build.usb_mode=0
|
|
|
|
heltec_vision_master_e_213.menu.CDCOnBoot.default=Enabled
|
|
heltec_vision_master_e_213.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
heltec_vision_master_e_213.menu.CDCOnBoot.cdc=Disabled
|
|
heltec_vision_master_e_213.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
|
|
|
|
heltec_vision_master_e_213.menu.MSCOnBoot.default=Disabled
|
|
heltec_vision_master_e_213.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
heltec_vision_master_e_213.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
heltec_vision_master_e_213.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
heltec_vision_master_e_213.menu.DFUOnBoot.default=Disabled
|
|
heltec_vision_master_e_213.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
heltec_vision_master_e_213.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
heltec_vision_master_e_213.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
heltec_vision_master_e_213.menu.UploadMode.default=UART0 / Hardware CDC
|
|
heltec_vision_master_e_213.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
heltec_vision_master_e_213.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
heltec_vision_master_e_213.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
heltec_vision_master_e_213.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
heltec_vision_master_e_213.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
heltec_vision_master_e_213.menu.CPUFreq.240=240MHz (WiFi)
|
|
heltec_vision_master_e_213.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
heltec_vision_master_e_213.menu.CPUFreq.160=160MHz (WiFi)
|
|
heltec_vision_master_e_213.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
heltec_vision_master_e_213.menu.CPUFreq.80=80MHz (WiFi)
|
|
heltec_vision_master_e_213.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
heltec_vision_master_e_213.menu.CPUFreq.40=40MHz
|
|
heltec_vision_master_e_213.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
heltec_vision_master_e_213.menu.CPUFreq.20=20MHz
|
|
heltec_vision_master_e_213.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
heltec_vision_master_e_213.menu.CPUFreq.10=10MHz
|
|
heltec_vision_master_e_213.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
heltec_vision_master_e_213.menu.UploadSpeed.921600=921600
|
|
heltec_vision_master_e_213.menu.UploadSpeed.921600.upload.speed=921600
|
|
heltec_vision_master_e_213.menu.UploadSpeed.115200=115200
|
|
heltec_vision_master_e_213.menu.UploadSpeed.115200.upload.speed=115200
|
|
heltec_vision_master_e_213.menu.UploadSpeed.256000.windows=256000
|
|
heltec_vision_master_e_213.menu.UploadSpeed.256000.upload.speed=256000
|
|
heltec_vision_master_e_213.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
heltec_vision_master_e_213.menu.UploadSpeed.230400=230400
|
|
heltec_vision_master_e_213.menu.UploadSpeed.230400.upload.speed=230400
|
|
heltec_vision_master_e_213.menu.UploadSpeed.460800.linux=460800
|
|
heltec_vision_master_e_213.menu.UploadSpeed.460800.macosx=460800
|
|
heltec_vision_master_e_213.menu.UploadSpeed.460800.upload.speed=460800
|
|
heltec_vision_master_e_213.menu.UploadSpeed.512000.windows=512000
|
|
heltec_vision_master_e_213.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
heltec_vision_master_e_213.menu.DebugLevel.none=None
|
|
heltec_vision_master_e_213.menu.DebugLevel.none.build.code_debug=0
|
|
heltec_vision_master_e_213.menu.DebugLevel.error=Error
|
|
heltec_vision_master_e_213.menu.DebugLevel.error.build.code_debug=1
|
|
heltec_vision_master_e_213.menu.DebugLevel.warn=Warn
|
|
heltec_vision_master_e_213.menu.DebugLevel.warn.build.code_debug=2
|
|
heltec_vision_master_e_213.menu.DebugLevel.info=Info
|
|
heltec_vision_master_e_213.menu.DebugLevel.info.build.code_debug=3
|
|
heltec_vision_master_e_213.menu.DebugLevel.debug=Debug
|
|
heltec_vision_master_e_213.menu.DebugLevel.debug.build.code_debug=4
|
|
heltec_vision_master_e_213.menu.DebugLevel.verbose=Verbose
|
|
heltec_vision_master_e_213.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.0=REGION_EU868
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.0.build.band=REGION_EU868
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.1=REGION_EU433
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.1.build.band=REGION_EU433
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.2=REGION_CN470
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.2.build.band=REGION_CN470
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.3=REGION_US915
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.3.build.band=REGION_US915
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.4=REGION_AU915
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.4.build.band=REGION_AU915
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.5=REGION_CN779
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.5.build.band=REGION_CN779
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.6=REGION_AS923
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.6.build.band=REGION_AS923
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.7=REGION_KR920
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.7.build.band=REGION_KR920
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.8=REGION_IN865
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.8.build.band=REGION_IN865
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.9=REGION_US915_HYBRID
|
|
heltec_vision_master_e_213.menu.LORAWAN_REGION.9.build.band=REGION_US915_HYBRID
|
|
|
|
heltec_vision_master_e_213.menu.LoRaWanDebugLevel.0=None
|
|
heltec_vision_master_e_213.menu.LoRaWanDebugLevel.0.build.LoRaWanDebugLevel=0
|
|
heltec_vision_master_e_213.menu.LoRaWanDebugLevel.1=Freq
|
|
heltec_vision_master_e_213.menu.LoRaWanDebugLevel.1.build.LoRaWanDebugLevel=1
|
|
heltec_vision_master_e_213.menu.LoRaWanDebugLevel.2=Freq && DIO
|
|
heltec_vision_master_e_213.menu.LoRaWanDebugLevel.2.build.LoRaWanDebugLevel=2
|
|
heltec_vision_master_e_213.menu.LoRaWanDebugLevel.3=Freq && DIO && PW
|
|
heltec_vision_master_e_213.menu.LoRaWanDebugLevel.3.build.LoRaWanDebugLevel=3
|
|
|
|
heltec_vision_master_e_213.menu.LORAWAN_DEVEUI.0=CUSTOM
|
|
heltec_vision_master_e_213.menu.LORAWAN_DEVEUI.0.build.LORAWAN_DEVEUI_AUTO=0
|
|
heltec_vision_master_e_213.menu.LORAWAN_DEVEUI.1=Generate By ChipID
|
|
heltec_vision_master_e_213.menu.LORAWAN_DEVEUI.1.build.LORAWAN_DEVEUI_AUTO=1
|
|
|
|
heltec_vision_master_e_213.menu.LORAWAN_PREAMBLE_LENGTH.0=8(default)
|
|
heltec_vision_master_e_213.menu.LORAWAN_PREAMBLE_LENGTH.0.build.LORAWAN_PREAMBLE_LENGTH=8
|
|
heltec_vision_master_e_213.menu.LORAWAN_PREAMBLE_LENGTH.1=16(For M00 and M00L)
|
|
heltec_vision_master_e_213.menu.LORAWAN_PREAMBLE_LENGTH.1.build.LORAWAN_PREAMBLE_LENGTH=16
|
|
|
|
heltec_vision_master_e_213.menu.SLOW_CLK_TPYE.0=Internal (default)
|
|
heltec_vision_master_e_213.menu.SLOW_CLK_TPYE.0.build.SLOW_CLK_TPYE=0
|
|
heltec_vision_master_e_213.menu.SLOW_CLK_TPYE.1=External 32K
|
|
heltec_vision_master_e_213.menu.SLOW_CLK_TPYE.1.build.SLOW_CLK_TPYE=1
|
|
|
|
heltec_vision_master_e_213.build.defines=-D{build.band} -DMCU_ESP32_S3 -DHELTEC_BOARD=36 -DHELTEC_VISION_MASTER_E_213 -DSLOW_CLK_TPYE={build.SLOW_CLK_TPYE} -DRADIO_CHIP_SX1262 -DLoRaWAN_DEBUG_LEVEL={build.LoRaWanDebugLevel} -DACTIVE_REGION=LORAMAC_{build.band} -DLORAWAN_PREAMBLE_LENGTH={build.LORAWAN_PREAMBLE_LENGTH} -DLORAWAN_DEVEUI_AUTO={build.LORAWAN_DEVEUI_AUTO} -D{build.board}
|
|
|
|
heltec_vision_master_e_213.menu.EraseFlash.none=Disabled
|
|
heltec_vision_master_e_213.menu.EraseFlash.none.upload.erase_cmd=
|
|
heltec_vision_master_e_213.menu.EraseFlash.all=Enabled
|
|
heltec_vision_master_e_213.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
espectro32.name=ESPectro32
|
|
|
|
espectro32.bootloader.tool=esptool_py
|
|
espectro32.bootloader.tool.default=esptool_py
|
|
|
|
espectro32.upload.tool=esptool_py
|
|
espectro32.upload.tool.default=esptool_py
|
|
espectro32.upload.tool.network=esp_ota
|
|
|
|
espectro32.upload.maximum_size=1310720
|
|
espectro32.upload.maximum_data_size=327680
|
|
espectro32.upload.flags=
|
|
espectro32.upload.extra_flags=
|
|
|
|
espectro32.serial.disableDTR=true
|
|
espectro32.serial.disableRTS=true
|
|
|
|
espectro32.build.tarch=xtensa
|
|
espectro32.build.bootloader_addr=0x1000
|
|
espectro32.build.target=esp32
|
|
espectro32.build.mcu=esp32
|
|
espectro32.build.core=esp32
|
|
espectro32.build.variant=espectro32
|
|
espectro32.build.board=ESPECTRO32
|
|
|
|
espectro32.build.f_cpu=240000000L
|
|
espectro32.build.flash_size=4MB
|
|
espectro32.build.flash_mode=dio
|
|
espectro32.build.boot=dio
|
|
espectro32.build.partitions=default
|
|
espectro32.build.defines=
|
|
|
|
espectro32.menu.FlashMode.qio=QIO
|
|
espectro32.menu.FlashMode.qio.build.flash_mode=dio
|
|
espectro32.menu.FlashMode.qio.build.boot=qio
|
|
espectro32.menu.FlashMode.dio=DIO
|
|
espectro32.menu.FlashMode.dio.build.flash_mode=dio
|
|
espectro32.menu.FlashMode.dio.build.boot=dio
|
|
|
|
espectro32.menu.FlashFreq.80=80MHz
|
|
espectro32.menu.FlashFreq.80.build.flash_freq=80m
|
|
espectro32.menu.FlashFreq.40=40MHz
|
|
espectro32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
espectro32.menu.FlashSize.4M=4MB (32Mb)
|
|
espectro32.menu.FlashSize.4M.build.flash_size=4MB
|
|
espectro32.menu.FlashSize.2M=2MB (16Mb)
|
|
espectro32.menu.FlashSize.2M.build.flash_size=2MB
|
|
espectro32.menu.FlashSize.2M.build.partitions=minimal
|
|
|
|
espectro32.menu.UploadSpeed.921600=921600
|
|
espectro32.menu.UploadSpeed.921600.upload.speed=921600
|
|
espectro32.menu.UploadSpeed.115200=115200
|
|
espectro32.menu.UploadSpeed.115200.upload.speed=115200
|
|
espectro32.menu.UploadSpeed.256000.windows=256000
|
|
espectro32.menu.UploadSpeed.256000.upload.speed=256000
|
|
espectro32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
espectro32.menu.UploadSpeed.230400=230400
|
|
espectro32.menu.UploadSpeed.230400.upload.speed=230400
|
|
espectro32.menu.UploadSpeed.460800.linux=460800
|
|
espectro32.menu.UploadSpeed.460800.macosx=460800
|
|
espectro32.menu.UploadSpeed.460800.upload.speed=460800
|
|
espectro32.menu.UploadSpeed.512000.windows=512000
|
|
espectro32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
espectro32.menu.DebugLevel.none=None
|
|
espectro32.menu.DebugLevel.none.build.code_debug=0
|
|
espectro32.menu.DebugLevel.error=Error
|
|
espectro32.menu.DebugLevel.error.build.code_debug=1
|
|
espectro32.menu.DebugLevel.warn=Warn
|
|
espectro32.menu.DebugLevel.warn.build.code_debug=2
|
|
espectro32.menu.DebugLevel.info=Info
|
|
espectro32.menu.DebugLevel.info.build.code_debug=3
|
|
espectro32.menu.DebugLevel.debug=Debug
|
|
espectro32.menu.DebugLevel.debug.build.code_debug=4
|
|
espectro32.menu.DebugLevel.verbose=Verbose
|
|
espectro32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
espectro32.menu.EraseFlash.none=Disabled
|
|
espectro32.menu.EraseFlash.none.upload.erase_cmd=
|
|
espectro32.menu.EraseFlash.all=Enabled
|
|
espectro32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
CoreESP32.name=Microduino-CoreESP32
|
|
|
|
CoreESP32.bootloader.tool=esptool_py
|
|
CoreESP32.bootloader.tool.default=esptool_py
|
|
|
|
CoreESP32.upload.tool=esptool_py
|
|
CoreESP32.upload.tool.default=esptool_py
|
|
CoreESP32.upload.tool.network=esp_ota
|
|
|
|
CoreESP32.upload.maximum_size=1310720
|
|
CoreESP32.upload.maximum_data_size=327680
|
|
CoreESP32.upload.flags=
|
|
CoreESP32.upload.extra_flags=
|
|
|
|
CoreESP32.serial.disableDTR=false
|
|
CoreESP32.serial.disableRTS=false
|
|
|
|
CoreESP32.build.tarch=xtensa
|
|
CoreESP32.build.bootloader_addr=0x1000
|
|
CoreESP32.build.target=esp32
|
|
CoreESP32.build.mcu=esp32
|
|
CoreESP32.build.core=esp32
|
|
CoreESP32.build.variant=Microduino-esp32
|
|
CoreESP32.build.board=CoreESP32
|
|
|
|
CoreESP32.build.f_cpu=240000000L
|
|
CoreESP32.build.flash_mode=dio
|
|
CoreESP32.build.flash_size=4MB
|
|
CoreESP32.build.boot=dio
|
|
CoreESP32.build.partitions=default
|
|
CoreESP32.build.defines=
|
|
|
|
CoreESP32.menu.PSRAM.disabled=Disabled
|
|
CoreESP32.menu.PSRAM.disabled.build.defines=
|
|
CoreESP32.menu.PSRAM.disabled.build.extra_libs=
|
|
CoreESP32.menu.PSRAM.enabled=Enabled
|
|
CoreESP32.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
CoreESP32.menu.PSRAM.enabled.build.extra_libs=
|
|
|
|
CoreESP32.menu.PartitionScheme.default=Default
|
|
CoreESP32.menu.PartitionScheme.default.build.partitions=default
|
|
CoreESP32.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
|
|
CoreESP32.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
CoreESP32.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
CoreESP32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
CoreESP32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
CoreESP32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
CoreESP32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
CoreESP32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
CoreESP32.menu.PartitionScheme.fatflash=16M Fat
|
|
CoreESP32.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
|
|
CoreESP32.menu.FlashFreq.80=80MHz
|
|
CoreESP32.menu.FlashFreq.80.build.flash_freq=80m
|
|
CoreESP32.menu.FlashFreq.40=40MHz
|
|
CoreESP32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
CoreESP32.menu.UploadSpeed.921600=921600
|
|
CoreESP32.menu.UploadSpeed.921600.upload.speed=921600
|
|
CoreESP32.menu.UploadSpeed.115200=115200
|
|
CoreESP32.menu.UploadSpeed.115200.upload.speed=115200
|
|
CoreESP32.menu.UploadSpeed.256000.windows=256000
|
|
CoreESP32.menu.UploadSpeed.256000.upload.speed=256000
|
|
CoreESP32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
CoreESP32.menu.UploadSpeed.230400=230400
|
|
CoreESP32.menu.UploadSpeed.230400.upload.speed=230400
|
|
CoreESP32.menu.UploadSpeed.460800.linux=460800
|
|
CoreESP32.menu.UploadSpeed.460800.macosx=460800
|
|
CoreESP32.menu.UploadSpeed.460800.upload.speed=460800
|
|
CoreESP32.menu.UploadSpeed.512000.windows=512000
|
|
CoreESP32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
CoreESP32.menu.DebugLevel.none=None
|
|
CoreESP32.menu.DebugLevel.none.build.code_debug=0
|
|
CoreESP32.menu.DebugLevel.error=Error
|
|
CoreESP32.menu.DebugLevel.error.build.code_debug=1
|
|
CoreESP32.menu.DebugLevel.warn=Warn
|
|
CoreESP32.menu.DebugLevel.warn.build.code_debug=2
|
|
CoreESP32.menu.DebugLevel.info=Info
|
|
CoreESP32.menu.DebugLevel.info.build.code_debug=3
|
|
CoreESP32.menu.DebugLevel.debug=Debug
|
|
CoreESP32.menu.DebugLevel.debug.build.code_debug=4
|
|
CoreESP32.menu.DebugLevel.verbose=Verbose
|
|
CoreESP32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
CoreESP32.menu.EraseFlash.none=Disabled
|
|
CoreESP32.menu.EraseFlash.none.upload.erase_cmd=
|
|
CoreESP32.menu.EraseFlash.all=Enabled
|
|
CoreESP32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
alksesp32.name=ALKS ESP32
|
|
|
|
alksesp32.bootloader.tool=esptool_py
|
|
alksesp32.bootloader.tool.default=esptool_py
|
|
|
|
alksesp32.upload.tool=esptool_py
|
|
alksesp32.upload.tool.default=esptool_py
|
|
alksesp32.upload.tool.network=esp_ota
|
|
|
|
alksesp32.upload.maximum_size=1310720
|
|
alksesp32.upload.maximum_data_size=327680
|
|
alksesp32.upload.flags=
|
|
alksesp32.upload.extra_flags=
|
|
|
|
alksesp32.serial.disableDTR=true
|
|
alksesp32.serial.disableRTS=true
|
|
|
|
alksesp32.build.tarch=xtensa
|
|
alksesp32.build.bootloader_addr=0x1000
|
|
alksesp32.build.target=esp32
|
|
alksesp32.build.mcu=esp32
|
|
alksesp32.build.core=esp32
|
|
alksesp32.build.variant=alksesp32
|
|
alksesp32.build.board=ALKS
|
|
|
|
alksesp32.build.f_cpu=240000000L
|
|
alksesp32.build.flash_size=4MB
|
|
alksesp32.build.flash_freq=40m
|
|
alksesp32.build.flash_mode=dio
|
|
alksesp32.build.boot=dio
|
|
alksesp32.build.partitions=default
|
|
alksesp32.build.defines=
|
|
|
|
alksesp32.menu.PSRAM.disabled=Disabled
|
|
alksesp32.menu.PSRAM.disabled.build.defines=
|
|
alksesp32.menu.PSRAM.disabled.build.extra_libs=
|
|
alksesp32.menu.PSRAM.enabled=Enabled
|
|
alksesp32.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
alksesp32.menu.PSRAM.enabled.build.extra_libs=
|
|
|
|
alksesp32.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
alksesp32.menu.PartitionScheme.default.build.partitions=default
|
|
alksesp32.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
alksesp32.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
alksesp32.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
alksesp32.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
alksesp32.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
alksesp32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
alksesp32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
alksesp32.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
alksesp32.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
alksesp32.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
alksesp32.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
alksesp32.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
alksesp32.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
alksesp32.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
alksesp32.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
alksesp32.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
alksesp32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
alksesp32.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
alksesp32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
alksesp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
alksesp32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
alksesp32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
alksesp32.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
alksesp32.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
|
|
alksesp32.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
alksesp32.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
alksesp32.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
alksesp32.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
alksesp32.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
alksesp32.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
alksesp32.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
alksesp32.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
alksesp32.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
alksesp32.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
alksesp32.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
alksesp32.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
alksesp32.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
alksesp32.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
alksesp32.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
alksesp32.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
alksesp32.menu.FlashMode.qio=QIO
|
|
alksesp32.menu.FlashMode.qio.build.flash_mode=dio
|
|
alksesp32.menu.FlashMode.qio.build.boot=qio
|
|
alksesp32.menu.FlashMode.dio=DIO
|
|
alksesp32.menu.FlashMode.dio.build.flash_mode=dio
|
|
alksesp32.menu.FlashMode.dio.build.boot=dio
|
|
|
|
alksesp32.menu.FlashFreq.80=80MHz
|
|
alksesp32.menu.FlashFreq.80.build.flash_freq=80m
|
|
alksesp32.menu.FlashFreq.40=40MHz
|
|
alksesp32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
alksesp32.menu.FlashSize.4M=4MB (32Mb)
|
|
alksesp32.menu.FlashSize.4M.build.flash_size=4MB
|
|
alksesp32.menu.FlashSize.2M=2MB (16Mb)
|
|
alksesp32.menu.FlashSize.2M.build.flash_size=2MB
|
|
alksesp32.menu.FlashSize.2M.build.partitions=minimal
|
|
alksesp32.menu.FlashSize.16M=16MB (128Mb)
|
|
alksesp32.menu.FlashSize.16M.build.flash_size=16MB
|
|
alksesp32.menu.FlashSize.16M.build.partitions=ffat
|
|
|
|
alksesp32.menu.UploadSpeed.921600=921600
|
|
alksesp32.menu.UploadSpeed.921600.upload.speed=921600
|
|
alksesp32.menu.UploadSpeed.115200=115200
|
|
alksesp32.menu.UploadSpeed.115200.upload.speed=115200
|
|
alksesp32.menu.UploadSpeed.256000.windows=256000
|
|
alksesp32.menu.UploadSpeed.256000.upload.speed=256000
|
|
alksesp32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
alksesp32.menu.UploadSpeed.230400=230400
|
|
alksesp32.menu.UploadSpeed.230400.upload.speed=230400
|
|
alksesp32.menu.UploadSpeed.460800.linux=460800
|
|
alksesp32.menu.UploadSpeed.460800.macosx=460800
|
|
alksesp32.menu.UploadSpeed.460800.upload.speed=460800
|
|
alksesp32.menu.UploadSpeed.512000.windows=512000
|
|
alksesp32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
alksesp32.menu.DebugLevel.none=None
|
|
alksesp32.menu.DebugLevel.none.build.code_debug=0
|
|
alksesp32.menu.DebugLevel.error=Error
|
|
alksesp32.menu.DebugLevel.error.build.code_debug=1
|
|
alksesp32.menu.DebugLevel.warn=Warn
|
|
alksesp32.menu.DebugLevel.warn.build.code_debug=2
|
|
alksesp32.menu.DebugLevel.info=Info
|
|
alksesp32.menu.DebugLevel.info.build.code_debug=3
|
|
alksesp32.menu.DebugLevel.debug=Debug
|
|
alksesp32.menu.DebugLevel.debug.build.code_debug=4
|
|
alksesp32.menu.DebugLevel.verbose=Verbose
|
|
alksesp32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
alksesp32.menu.EraseFlash.none=Disabled
|
|
alksesp32.menu.EraseFlash.none.upload.erase_cmd=
|
|
alksesp32.menu.EraseFlash.all=Enabled
|
|
alksesp32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
wipy3.name=WiPy 3.0
|
|
|
|
wipy3.bootloader.tool=esptool_py
|
|
wipy3.bootloader.tool.default=esptool_py
|
|
|
|
wipy3.upload.tool=esptool_py
|
|
wipy3.upload.tool.default=esptool_py
|
|
wipy3.upload.tool.network=esp_ota
|
|
|
|
wipy3.upload.maximum_size=1310720
|
|
wipy3.upload.maximum_data_size=294912
|
|
wipy3.upload.flags=
|
|
wipy3.upload.extra_flags=
|
|
|
|
wipy3.serial.disableDTR=true
|
|
wipy3.serial.disableRTS=true
|
|
|
|
wipy3.build.tarch=xtensa
|
|
wipy3.build.bootloader_addr=0x1000
|
|
wipy3.build.target=esp32
|
|
wipy3.build.mcu=esp32
|
|
wipy3.build.core=esp32
|
|
wipy3.build.variant=wipy3
|
|
wipy3.build.board=WIPY3
|
|
|
|
wipy3.build.f_cpu=240000000L
|
|
wipy3.build.flash_mode=dio
|
|
wipy3.build.flash_size=8MB
|
|
wipy3.build.boot=dio
|
|
wipy3.build.partitions=default
|
|
wipy3.build.defines=
|
|
|
|
wipy3.menu.FlashFreq.80=80MHz
|
|
wipy3.menu.FlashFreq.80.build.flash_freq=80m
|
|
wipy3.menu.FlashFreq.40=40MHz
|
|
wipy3.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
wipy3.menu.UploadSpeed.921600=921600
|
|
wipy3.menu.UploadSpeed.921600.upload.speed=921600
|
|
wipy3.menu.UploadSpeed.115200=115200
|
|
wipy3.menu.UploadSpeed.115200.upload.speed=115200
|
|
wipy3.menu.UploadSpeed.256000.windows=256000
|
|
wipy3.menu.UploadSpeed.256000.upload.speed=256000
|
|
wipy3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
wipy3.menu.UploadSpeed.230400=230400
|
|
wipy3.menu.UploadSpeed.230400.upload.speed=230400
|
|
wipy3.menu.UploadSpeed.460800.linux=460800
|
|
wipy3.menu.UploadSpeed.460800.macosx=460800
|
|
wipy3.menu.UploadSpeed.460800.upload.speed=460800
|
|
wipy3.menu.UploadSpeed.512000.windows=512000
|
|
wipy3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
wipy3.menu.DebugLevel.none=None
|
|
wipy3.menu.DebugLevel.none.build.code_debug=0
|
|
wipy3.menu.DebugLevel.error=Error
|
|
wipy3.menu.DebugLevel.error.build.code_debug=1
|
|
wipy3.menu.DebugLevel.warn=Warn
|
|
wipy3.menu.DebugLevel.warn.build.code_debug=2
|
|
wipy3.menu.DebugLevel.info=Info
|
|
wipy3.menu.DebugLevel.info.build.code_debug=3
|
|
wipy3.menu.DebugLevel.debug=Debug
|
|
wipy3.menu.DebugLevel.debug.build.code_debug=4
|
|
wipy3.menu.DebugLevel.verbose=Verbose
|
|
wipy3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
wipy3.menu.EraseFlash.none=Disabled
|
|
wipy3.menu.EraseFlash.none.upload.erase_cmd=
|
|
wipy3.menu.EraseFlash.all=Enabled
|
|
wipy3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
wt32-eth01.name=WT32-ETH01 Ethernet Module
|
|
|
|
wt32-eth01.bootloader.tool=esptool_py
|
|
wt32-eth01.bootloader.tool.default=esptool_py
|
|
|
|
wt32-eth01.upload.tool=esptool_py
|
|
wt32-eth01.upload.tool.default=esptool_py
|
|
wt32-eth01.upload.tool.network=esp_ota
|
|
|
|
wt32-eth01.upload.maximum_size=8388608
|
|
wt32-eth01.upload.maximum_data_size=327680
|
|
wt32-eth01.upload.flags=
|
|
wt32-eth01.upload.extra_flags=
|
|
|
|
wt32-eth01.serial.disableDTR=true
|
|
wt32-eth01.serial.disableRTS=true
|
|
|
|
wt32-eth01.build.tarch=xtensa
|
|
wt32-eth01.build.bootloader_addr=0x1000
|
|
wt32-eth01.build.target=esp32
|
|
wt32-eth01.build.mcu=esp32
|
|
wt32-eth01.build.core=esp32
|
|
wt32-eth01.build.variant=wt32-eth01
|
|
wt32-eth01.build.board=WT32_ETH01
|
|
|
|
wt32-eth01.build.f_cpu=240000000L
|
|
wt32-eth01.build.flash_size=4MB
|
|
wt32-eth01.build.flash_freq=40m
|
|
wt32-eth01.build.flash_mode=dio
|
|
wt32-eth01.build.boot=dio
|
|
wt32-eth01.build.partitions=default
|
|
wt32-eth01.build.defines=
|
|
wt32-eth01.build.extra_libs=
|
|
|
|
wt32-eth01.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
wt32-eth01.menu.PartitionScheme.default.build.partitions=default
|
|
wt32-eth01.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
wt32-eth01.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
wt32-eth01.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
wt32-eth01.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
wt32-eth01.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
wt32-eth01.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
wt32-eth01.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
wt32-eth01.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
wt32-eth01.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
wt32-eth01.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
wt32-eth01.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
wt32-eth01.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
wt32-eth01.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
wt32-eth01.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
wt32-eth01.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
wt32-eth01.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
wt32-eth01.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
wt32-eth01.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
wt32-eth01.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
wt32-eth01.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
wt32-eth01.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
wt32-eth01.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
wt32-eth01.menu.FlashMode.qio=QIO
|
|
wt32-eth01.menu.FlashMode.qio.build.flash_mode=dio
|
|
wt32-eth01.menu.FlashMode.qio.build.boot=qio
|
|
wt32-eth01.menu.FlashMode.dio=DIO
|
|
wt32-eth01.menu.FlashMode.dio.build.flash_mode=dio
|
|
wt32-eth01.menu.FlashMode.dio.build.boot=dio
|
|
|
|
wt32-eth01.menu.FlashFreq.80=80MHz
|
|
wt32-eth01.menu.FlashFreq.80.build.flash_freq=80m
|
|
wt32-eth01.menu.FlashFreq.40=40MHz
|
|
wt32-eth01.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
wt32-eth01.menu.UploadSpeed.921600=921600
|
|
wt32-eth01.menu.UploadSpeed.921600.upload.speed=921600
|
|
wt32-eth01.menu.UploadSpeed.115200=115200
|
|
wt32-eth01.menu.UploadSpeed.115200.upload.speed=115200
|
|
wt32-eth01.menu.UploadSpeed.256000.windows=256000
|
|
wt32-eth01.menu.UploadSpeed.256000.upload.speed=256000
|
|
wt32-eth01.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
wt32-eth01.menu.UploadSpeed.230400=230400
|
|
wt32-eth01.menu.UploadSpeed.230400.upload.speed=230400
|
|
wt32-eth01.menu.UploadSpeed.460800.linux=460800
|
|
wt32-eth01.menu.UploadSpeed.460800.macosx=460800
|
|
wt32-eth01.menu.UploadSpeed.460800.upload.speed=460800
|
|
wt32-eth01.menu.UploadSpeed.512000.windows=512000
|
|
wt32-eth01.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
wt32-eth01.menu.DebugLevel.none=None
|
|
wt32-eth01.menu.DebugLevel.none.build.code_debug=0
|
|
wt32-eth01.menu.DebugLevel.error=Error
|
|
wt32-eth01.menu.DebugLevel.error.build.code_debug=1
|
|
wt32-eth01.menu.DebugLevel.warn=Warn
|
|
wt32-eth01.menu.DebugLevel.warn.build.code_debug=2
|
|
wt32-eth01.menu.DebugLevel.info=Info
|
|
wt32-eth01.menu.DebugLevel.info.build.code_debug=3
|
|
wt32-eth01.menu.DebugLevel.debug=Debug
|
|
wt32-eth01.menu.DebugLevel.debug.build.code_debug=4
|
|
wt32-eth01.menu.DebugLevel.verbose=Verbose
|
|
wt32-eth01.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
wt32-eth01.menu.EraseFlash.none=Disabled
|
|
wt32-eth01.menu.EraseFlash.none.upload.erase_cmd=
|
|
wt32-eth01.menu.EraseFlash.all=Enabled
|
|
wt32-eth01.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
wt32-sc01-plus.name=WT32-SC01 PLUS
|
|
wt32-sc01-plus.vid.0=0x303a
|
|
wt32-sc01-plus.pid.0=0x80D0
|
|
|
|
wt32-sc01-plus.bootloader.tool=esptool_py
|
|
wt32-sc01-plus.bootloader.tool.default=esptool_py
|
|
|
|
wt32-sc01-plus.upload.tool=esptool_py
|
|
wt32-sc01-plus.upload.tool.default=esptool_py
|
|
wt32-sc01-plus.upload.tool.network=esp_ota
|
|
|
|
wt32-sc01-plus.upload.maximum_size=1310720
|
|
wt32-sc01-plus.upload.maximum_data_size=327680
|
|
wt32-sc01-plus.upload.flags=
|
|
wt32-sc01-plus.upload.extra_flags=
|
|
wt32-sc01-plus.upload.use_1200bps_touch=false
|
|
wt32-sc01-plus.upload.wait_for_upload_port=false
|
|
|
|
wt32-sc01-plus.serial.disableDTR=false
|
|
wt32-sc01-plus.serial.disableRTS=false
|
|
|
|
wt32-sc01-plus.build.tarch=xtensa
|
|
wt32-sc01-plus.build.bootloader_addr=0x0
|
|
wt32-sc01-plus.build.target=esp32s3
|
|
wt32-sc01-plus.build.mcu=esp32s3
|
|
wt32-sc01-plus.build.core=esp32
|
|
wt32-sc01-plus.build.variant=wt32-sc01-plus
|
|
wt32-sc01-plus.build.board=WT32_SC01_PLUS
|
|
|
|
wt32-sc01-plus.build.usb_mode=1
|
|
wt32-sc01-plus.build.cdc_on_boot=1
|
|
wt32-sc01-plus.build.msc_on_boot=0
|
|
wt32-sc01-plus.build.dfu_on_boot=0
|
|
wt32-sc01-plus.build.f_cpu=240000000L
|
|
wt32-sc01-plus.build.flash_size=16MB
|
|
wt32-sc01-plus.build.flash_freq=80m
|
|
wt32-sc01-plus.build.flash_mode=dio
|
|
wt32-sc01-plus.build.boot=qio
|
|
wt32-sc01-plus.build.partitions=default
|
|
wt32-sc01-plus.build.defines=
|
|
wt32-sc01-plus.build.loop_core=
|
|
wt32-sc01-plus.build.event_core=
|
|
wt32-sc01-plus.build.flash_type=qio
|
|
wt32-sc01-plus.build.psram_type=qspi
|
|
wt32-sc01-plus.build.memory_type=qio_qspi
|
|
|
|
wt32-sc01-plus.menu.LoopCore.1=Core 1
|
|
wt32-sc01-plus.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
wt32-sc01-plus.menu.LoopCore.0=Core 0
|
|
wt32-sc01-plus.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
wt32-sc01-plus.menu.EventsCore.1=Core 1
|
|
wt32-sc01-plus.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
wt32-sc01-plus.menu.EventsCore.0=Core 0
|
|
wt32-sc01-plus.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
wt32-sc01-plus.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
wt32-sc01-plus.menu.USBMode.hwcdc.build.usb_mode=1
|
|
wt32-sc01-plus.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
wt32-sc01-plus.menu.USBMode.default.build.usb_mode=0
|
|
|
|
wt32-sc01-plus.menu.CDCOnBoot.cdc=Enabled
|
|
wt32-sc01-plus.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
wt32-sc01-plus.menu.CDCOnBoot.default=Disabled
|
|
wt32-sc01-plus.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
wt32-sc01-plus.menu.MSCOnBoot.default=Disabled
|
|
wt32-sc01-plus.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
wt32-sc01-plus.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
wt32-sc01-plus.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
wt32-sc01-plus.menu.DFUOnBoot.default=Disabled
|
|
wt32-sc01-plus.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
wt32-sc01-plus.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
wt32-sc01-plus.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
wt32-sc01-plus.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
wt32-sc01-plus.menu.UploadMode.default=UART0 / Hardware CDC
|
|
wt32-sc01-plus.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
wt32-sc01-plus.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
wt32-sc01-plus.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
wt32-sc01-plus.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
wt32-sc01-plus.menu.PSRAM.enabled=Enabled
|
|
wt32-sc01-plus.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
wt32-sc01-plus.menu.PSRAM.disabled=Disabled
|
|
wt32-sc01-plus.menu.PSRAM.disabled.build.defines=
|
|
|
|
wt32-sc01-plus.menu.PartitionScheme.default_8MB=Default (3MB APP/1.5MB SPIFFS)
|
|
wt32-sc01-plus.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
wt32-sc01-plus.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
wt32-sc01-plus.menu.PartitionScheme.tinyuf2=TinyUF2 Compatibility (2MB APP/3.7MB FFAT)
|
|
wt32-sc01-plus.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader_tinyuf2
|
|
wt32-sc01-plus.menu.PartitionScheme.tinyuf2.build.custom_partitions=partitions_tinyuf2
|
|
wt32-sc01-plus.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
wt32-sc01-plus.menu.PartitionScheme.tinyuf2.upload.maximum_size=2097152
|
|
|
|
wt32-sc01-plus.menu.CPUFreq.240=240MHz (WiFi)
|
|
wt32-sc01-plus.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
wt32-sc01-plus.menu.CPUFreq.160=160MHz (WiFi)
|
|
wt32-sc01-plus.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
wt32-sc01-plus.menu.CPUFreq.80=80MHz (WiFi)
|
|
wt32-sc01-plus.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
wt32-sc01-plus.menu.CPUFreq.40=40MHz
|
|
wt32-sc01-plus.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
wt32-sc01-plus.menu.CPUFreq.20=20MHz
|
|
wt32-sc01-plus.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
wt32-sc01-plus.menu.CPUFreq.10=10MHz
|
|
wt32-sc01-plus.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
wt32-sc01-plus.menu.FlashMode.qio=QIO
|
|
wt32-sc01-plus.menu.FlashMode.qio.build.flash_mode=dio
|
|
wt32-sc01-plus.menu.FlashMode.qio.build.boot=qio
|
|
wt32-sc01-plus.menu.FlashMode.dio=DIO
|
|
wt32-sc01-plus.menu.FlashMode.dio.build.flash_mode=dio
|
|
wt32-sc01-plus.menu.FlashMode.dio.build.boot=dio
|
|
|
|
wt32-sc01-plus.menu.UploadSpeed.921600=921600
|
|
wt32-sc01-plus.menu.UploadSpeed.921600.upload.speed=921600
|
|
wt32-sc01-plus.menu.UploadSpeed.115200=115200
|
|
wt32-sc01-plus.menu.UploadSpeed.115200.upload.speed=115200
|
|
wt32-sc01-plus.menu.UploadSpeed.256000.windows=256000
|
|
wt32-sc01-plus.menu.UploadSpeed.256000.upload.speed=256000
|
|
wt32-sc01-plus.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
wt32-sc01-plus.menu.UploadSpeed.230400=230400
|
|
wt32-sc01-plus.menu.UploadSpeed.230400.upload.speed=230400
|
|
wt32-sc01-plus.menu.UploadSpeed.460800.linux=460800
|
|
wt32-sc01-plus.menu.UploadSpeed.460800.macosx=460800
|
|
wt32-sc01-plus.menu.UploadSpeed.460800.upload.speed=460800
|
|
wt32-sc01-plus.menu.UploadSpeed.512000.windows=512000
|
|
wt32-sc01-plus.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
wt32-sc01-plus.menu.DebugLevel.none=None
|
|
wt32-sc01-plus.menu.DebugLevel.none.build.code_debug=0
|
|
wt32-sc01-plus.menu.DebugLevel.error=Error
|
|
wt32-sc01-plus.menu.DebugLevel.error.build.code_debug=1
|
|
wt32-sc01-plus.menu.DebugLevel.warn=Warn
|
|
wt32-sc01-plus.menu.DebugLevel.warn.build.code_debug=2
|
|
wt32-sc01-plus.menu.DebugLevel.info=Info
|
|
wt32-sc01-plus.menu.DebugLevel.info.build.code_debug=3
|
|
wt32-sc01-plus.menu.DebugLevel.debug=Debug
|
|
wt32-sc01-plus.menu.DebugLevel.debug.build.code_debug=4
|
|
wt32-sc01-plus.menu.DebugLevel.verbose=Verbose
|
|
wt32-sc01-plus.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
wt32-sc01-plus.menu.EraseFlash.none=Disabled
|
|
wt32-sc01-plus.menu.EraseFlash.none.upload.erase_cmd=
|
|
wt32-sc01-plus.menu.EraseFlash.all=Enabled
|
|
wt32-sc01-plus.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
bpi-bit.name=BPI-BIT
|
|
|
|
bpi-bit.bootloader.tool=esptool_py
|
|
bpi-bit.bootloader.tool.default=esptool_py
|
|
|
|
bpi-bit.upload.tool=esptool_py
|
|
bpi-bit.upload.tool.default=esptool_py
|
|
bpi-bit.upload.tool.network=esp_ota
|
|
|
|
bpi-bit.upload.maximum_size=1310720
|
|
bpi-bit.upload.maximum_data_size=294912
|
|
bpi-bit.upload.flags=
|
|
bpi-bit.upload.extra_flags=
|
|
|
|
bpi-bit.serial.disableDTR=true
|
|
bpi-bit.serial.disableRTS=true
|
|
|
|
bpi-bit.build.tarch=xtensa
|
|
bpi-bit.build.bootloader_addr=0x1000
|
|
bpi-bit.build.target=esp32
|
|
bpi-bit.build.mcu=esp32
|
|
bpi-bit.build.core=esp32
|
|
bpi-bit.build.variant=bpi-bit
|
|
bpi-bit.build.board=BPI_BIT
|
|
|
|
bpi-bit.build.f_cpu=160000000L
|
|
bpi-bit.build.flash_mode=dio
|
|
bpi-bit.build.flash_size=4MB
|
|
bpi-bit.build.boot=dio
|
|
bpi-bit.build.partitions=default
|
|
|
|
bpi-bit.menu.FlashFreq.80=80MHz
|
|
bpi-bit.menu.FlashFreq.80.build.flash_freq=80m
|
|
bpi-bit.menu.FlashFreq.40=40MHz
|
|
bpi-bit.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
bpi-bit.menu.UploadSpeed.921600=921600
|
|
bpi-bit.menu.UploadSpeed.921600.upload.speed=921600
|
|
bpi-bit.menu.UploadSpeed.115200=115200
|
|
bpi-bit.menu.UploadSpeed.115200.upload.speed=115200
|
|
bpi-bit.menu.UploadSpeed.256000.windows=256000
|
|
bpi-bit.menu.UploadSpeed.256000.upload.speed=256000
|
|
bpi-bit.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
bpi-bit.menu.UploadSpeed.230400=230400
|
|
bpi-bit.menu.UploadSpeed.230400.upload.speed=230400
|
|
bpi-bit.menu.UploadSpeed.460800.linux=460800
|
|
bpi-bit.menu.UploadSpeed.460800.macosx=460800
|
|
bpi-bit.menu.UploadSpeed.460800.upload.speed=460800
|
|
bpi-bit.menu.UploadSpeed.512000.windows=512000
|
|
bpi-bit.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
bpi-bit.menu.DebugLevel.none=None
|
|
bpi-bit.menu.DebugLevel.none.build.code_debug=0
|
|
bpi-bit.menu.DebugLevel.error=Error
|
|
bpi-bit.menu.DebugLevel.error.build.code_debug=1
|
|
bpi-bit.menu.DebugLevel.warn=Warn
|
|
bpi-bit.menu.DebugLevel.warn.build.code_debug=2
|
|
bpi-bit.menu.DebugLevel.info=Info
|
|
bpi-bit.menu.DebugLevel.info.build.code_debug=3
|
|
bpi-bit.menu.DebugLevel.debug=Debug
|
|
bpi-bit.menu.DebugLevel.debug.build.code_debug=4
|
|
bpi-bit.menu.DebugLevel.verbose=Verbose
|
|
bpi-bit.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
bpi-bit.menu.EraseFlash.none=Disabled
|
|
bpi-bit.menu.EraseFlash.none.upload.erase_cmd=
|
|
bpi-bit.menu.EraseFlash.all=Enabled
|
|
bpi-bit.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
bpi_leaf_s3.name=BPI-Leaf-S3
|
|
bpi_leaf_s3.vid.0=0x303a
|
|
bpi_leaf_s3.pid.0=0x80df
|
|
|
|
bpi_leaf_s3.bootloader.tool=esptool_py
|
|
bpi_leaf_s3.bootloader.tool.default=esptool_py
|
|
|
|
bpi_leaf_s3.upload.tool=esptool_py
|
|
bpi_leaf_s3.upload.tool.default=esptool_py
|
|
bpi_leaf_s3.upload.tool.network=esp_ota
|
|
|
|
bpi_leaf_s3.upload.maximum_size=1310720
|
|
bpi_leaf_s3.upload.maximum_data_size=327680
|
|
bpi_leaf_s3.upload.flags=
|
|
bpi_leaf_s3.upload.extra_flags=
|
|
bpi_leaf_s3.upload.use_1200bps_touch=false
|
|
bpi_leaf_s3.upload.wait_for_upload_port=false
|
|
|
|
bpi_leaf_s3.serial.disableDTR=false
|
|
bpi_leaf_s3.serial.disableRTS=false
|
|
|
|
bpi_leaf_s3.build.tarch=xtensa
|
|
bpi_leaf_s3.build.bootloader_addr=0x0
|
|
bpi_leaf_s3.build.target=esp32s3
|
|
bpi_leaf_s3.build.mcu=esp32s3
|
|
bpi_leaf_s3.build.core=esp32
|
|
bpi_leaf_s3.build.variant=bpi_leaf_s3
|
|
bpi_leaf_s3.build.board=BPI_LEAF_S3
|
|
|
|
bpi_leaf_s3.build.usb_mode=1
|
|
bpi_leaf_s3.build.cdc_on_boot=0
|
|
bpi_leaf_s3.build.msc_on_boot=0
|
|
bpi_leaf_s3.build.dfu_on_boot=0
|
|
bpi_leaf_s3.build.f_cpu=240000000L
|
|
bpi_leaf_s3.build.flash_size=8MB
|
|
bpi_leaf_s3.build.flash_freq=80m
|
|
bpi_leaf_s3.build.flash_mode=dio
|
|
bpi_leaf_s3.build.boot=qio
|
|
bpi_leaf_s3.build.boot_freq=80m
|
|
bpi_leaf_s3.build.partitions=default
|
|
bpi_leaf_s3.build.defines=
|
|
bpi_leaf_s3.build.loop_core=
|
|
bpi_leaf_s3.build.event_core=
|
|
bpi_leaf_s3.build.psram_type=qspi
|
|
bpi_leaf_s3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
bpi_leaf_s3.menu.PSRAM.enabled=QSPI PSRAM
|
|
bpi_leaf_s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
bpi_leaf_s3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
bpi_leaf_s3.menu.PSRAM.disabled=Disabled
|
|
bpi_leaf_s3.menu.PSRAM.disabled.build.defines=
|
|
bpi_leaf_s3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
bpi_leaf_s3.menu.PSRAM.opi=OPI PSRAM
|
|
bpi_leaf_s3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
bpi_leaf_s3.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
bpi_leaf_s3.menu.FlashMode.qio=QIO 80MHz
|
|
bpi_leaf_s3.menu.FlashMode.qio.build.flash_mode=dio
|
|
bpi_leaf_s3.menu.FlashMode.qio.build.boot=qio
|
|
bpi_leaf_s3.menu.FlashMode.qio.build.boot_freq=80m
|
|
bpi_leaf_s3.menu.FlashMode.qio.build.flash_freq=80m
|
|
bpi_leaf_s3.menu.FlashMode.qio120=QIO 120MHz
|
|
bpi_leaf_s3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
bpi_leaf_s3.menu.FlashMode.qio120.build.boot=qio
|
|
bpi_leaf_s3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
bpi_leaf_s3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
bpi_leaf_s3.menu.FlashMode.dio=DIO 80MHz
|
|
bpi_leaf_s3.menu.FlashMode.dio.build.flash_mode=dio
|
|
bpi_leaf_s3.menu.FlashMode.dio.build.boot=dio
|
|
bpi_leaf_s3.menu.FlashMode.dio.build.boot_freq=80m
|
|
bpi_leaf_s3.menu.FlashMode.dio.build.flash_freq=80m
|
|
bpi_leaf_s3.menu.FlashMode.opi=OPI 80MHz
|
|
bpi_leaf_s3.menu.FlashMode.opi.build.flash_mode=dout
|
|
bpi_leaf_s3.menu.FlashMode.opi.build.boot=opi
|
|
bpi_leaf_s3.menu.FlashMode.opi.build.boot_freq=80m
|
|
bpi_leaf_s3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
bpi_leaf_s3.menu.FlashSize.8M=8MB (64Mb)
|
|
bpi_leaf_s3.menu.FlashSize.8M.build.flash_size=8MB
|
|
bpi_leaf_s3.menu.FlashSize.8M.build.partitions=default_8MB
|
|
bpi_leaf_s3.menu.FlashSize.4M=4MB (32Mb)
|
|
bpi_leaf_s3.menu.FlashSize.4M.build.flash_size=4MB
|
|
bpi_leaf_s3.menu.FlashSize.16M=16MB (128Mb)
|
|
bpi_leaf_s3.menu.FlashSize.16M.build.flash_size=16MB
|
|
#bpi_leaf_s3.menu.FlashSize.32M=32MB (256Mb)
|
|
#bpi_leaf_s3.menu.FlashSize.32M.build.flash_size=32MB
|
|
|
|
bpi_leaf_s3.menu.LoopCore.1=Core 1
|
|
bpi_leaf_s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
bpi_leaf_s3.menu.LoopCore.0=Core 0
|
|
bpi_leaf_s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
bpi_leaf_s3.menu.EventsCore.1=Core 1
|
|
bpi_leaf_s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
bpi_leaf_s3.menu.EventsCore.0=Core 0
|
|
bpi_leaf_s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
bpi_leaf_s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
bpi_leaf_s3.menu.USBMode.default.build.usb_mode=0
|
|
bpi_leaf_s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
bpi_leaf_s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
|
|
bpi_leaf_s3.menu.CDCOnBoot.cdc=Enabled
|
|
bpi_leaf_s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
bpi_leaf_s3.menu.CDCOnBoot.default=Disabled
|
|
bpi_leaf_s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
bpi_leaf_s3.menu.MSCOnBoot.default=Disabled
|
|
bpi_leaf_s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
bpi_leaf_s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
bpi_leaf_s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
bpi_leaf_s3.menu.DFUOnBoot.default=Disabled
|
|
bpi_leaf_s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
bpi_leaf_s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
bpi_leaf_s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
bpi_leaf_s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
bpi_leaf_s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
bpi_leaf_s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
bpi_leaf_s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
bpi_leaf_s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
bpi_leaf_s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
bpi_leaf_s3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
bpi_leaf_s3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
bpi_leaf_s3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
bpi_leaf_s3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
bpi_leaf_s3.menu.PartitionScheme.default.build.partitions=default
|
|
bpi_leaf_s3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
bpi_leaf_s3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
bpi_leaf_s3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
bpi_leaf_s3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
bpi_leaf_s3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
bpi_leaf_s3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
bpi_leaf_s3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
bpi_leaf_s3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
bpi_leaf_s3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
bpi_leaf_s3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
bpi_leaf_s3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
bpi_leaf_s3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
bpi_leaf_s3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
bpi_leaf_s3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
bpi_leaf_s3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
bpi_leaf_s3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
bpi_leaf_s3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
bpi_leaf_s3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
bpi_leaf_s3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
bpi_leaf_s3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
bpi_leaf_s3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
bpi_leaf_s3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
bpi_leaf_s3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
bpi_leaf_s3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
bpi_leaf_s3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
bpi_leaf_s3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
bpi_leaf_s3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
bpi_leaf_s3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
bpi_leaf_s3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
bpi_leaf_s3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
bpi_leaf_s3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
bpi_leaf_s3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
bpi_leaf_s3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
bpi_leaf_s3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
bpi_leaf_s3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
bpi_leaf_s3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
bpi_leaf_s3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
bpi_leaf_s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
bpi_leaf_s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
bpi_leaf_s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
bpi_leaf_s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
bpi_leaf_s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
bpi_leaf_s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
bpi_leaf_s3.menu.CPUFreq.40=40MHz
|
|
bpi_leaf_s3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
bpi_leaf_s3.menu.CPUFreq.20=20MHz
|
|
bpi_leaf_s3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
bpi_leaf_s3.menu.CPUFreq.10=10MHz
|
|
bpi_leaf_s3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
bpi_leaf_s3.menu.UploadSpeed.921600=921600
|
|
bpi_leaf_s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
bpi_leaf_s3.menu.UploadSpeed.115200=115200
|
|
bpi_leaf_s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
bpi_leaf_s3.menu.UploadSpeed.256000.windows=256000
|
|
bpi_leaf_s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
bpi_leaf_s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
bpi_leaf_s3.menu.UploadSpeed.230400=230400
|
|
bpi_leaf_s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
bpi_leaf_s3.menu.UploadSpeed.460800.linux=460800
|
|
bpi_leaf_s3.menu.UploadSpeed.460800.macosx=460800
|
|
bpi_leaf_s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
bpi_leaf_s3.menu.UploadSpeed.512000.windows=512000
|
|
bpi_leaf_s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
bpi_leaf_s3.menu.DebugLevel.none=None
|
|
bpi_leaf_s3.menu.DebugLevel.none.build.code_debug=0
|
|
bpi_leaf_s3.menu.DebugLevel.error=Error
|
|
bpi_leaf_s3.menu.DebugLevel.error.build.code_debug=1
|
|
bpi_leaf_s3.menu.DebugLevel.warn=Warn
|
|
bpi_leaf_s3.menu.DebugLevel.warn.build.code_debug=2
|
|
bpi_leaf_s3.menu.DebugLevel.info=Info
|
|
bpi_leaf_s3.menu.DebugLevel.info.build.code_debug=3
|
|
bpi_leaf_s3.menu.DebugLevel.debug=Debug
|
|
bpi_leaf_s3.menu.DebugLevel.debug.build.code_debug=4
|
|
bpi_leaf_s3.menu.DebugLevel.verbose=Verbose
|
|
bpi_leaf_s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
bpi_leaf_s3.menu.EraseFlash.none=Disabled
|
|
bpi_leaf_s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
bpi_leaf_s3.menu.EraseFlash.all=Enabled
|
|
bpi_leaf_s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
wesp32.name=Silicognition wESP32
|
|
|
|
wesp32.bootloader.tool=esptool_py
|
|
wesp32.bootloader.tool.default=esptool_py
|
|
|
|
wesp32.upload.tool=esptool_py
|
|
wesp32.upload.tool.default=esptool_py
|
|
wesp32.upload.tool.network=esp_ota
|
|
|
|
wesp32.upload.maximum_size=1310720
|
|
wesp32.upload.maximum_data_size=327680
|
|
wesp32.upload.flags=
|
|
wesp32.upload.extra_flags=
|
|
|
|
wesp32.serial.disableDTR=true
|
|
wesp32.serial.disableRTS=true
|
|
|
|
wesp32.build.tarch=xtensa
|
|
wesp32.build.bootloader_addr=0x1000
|
|
wesp32.build.target=esp32
|
|
wesp32.build.mcu=esp32
|
|
wesp32.build.core=esp32
|
|
wesp32.build.variant=wesp32
|
|
wesp32.build.board=WESP32
|
|
|
|
wesp32.build.f_cpu=240000000L
|
|
wesp32.build.flash_mode=dio
|
|
wesp32.build.flash_size=4MB
|
|
wesp32.build.boot=dio
|
|
wesp32.build.partitions=default
|
|
wesp32.build.defines=
|
|
|
|
wesp32.menu.FlashFreq.80=80MHz
|
|
wesp32.menu.FlashFreq.80.build.flash_freq=80m
|
|
wesp32.menu.FlashFreq.40=40MHz
|
|
wesp32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
wesp32.menu.UploadSpeed.921600=921600
|
|
wesp32.menu.UploadSpeed.921600.upload.speed=921600
|
|
wesp32.menu.UploadSpeed.115200=115200
|
|
wesp32.menu.UploadSpeed.115200.upload.speed=115200
|
|
wesp32.menu.UploadSpeed.256000.windows=256000
|
|
wesp32.menu.UploadSpeed.256000.upload.speed=256000
|
|
wesp32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
wesp32.menu.UploadSpeed.230400=230400
|
|
wesp32.menu.UploadSpeed.230400.upload.speed=230400
|
|
wesp32.menu.UploadSpeed.460800.linux=460800
|
|
wesp32.menu.UploadSpeed.460800.macosx=460800
|
|
wesp32.menu.UploadSpeed.460800.upload.speed=460800
|
|
wesp32.menu.UploadSpeed.512000.windows=512000
|
|
wesp32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
wesp32.menu.DebugLevel.none=None
|
|
wesp32.menu.DebugLevel.none.build.code_debug=0
|
|
wesp32.menu.DebugLevel.error=Error
|
|
wesp32.menu.DebugLevel.error.build.code_debug=1
|
|
wesp32.menu.DebugLevel.warn=Warn
|
|
wesp32.menu.DebugLevel.warn.build.code_debug=2
|
|
wesp32.menu.DebugLevel.info=Info
|
|
wesp32.menu.DebugLevel.info.build.code_debug=3
|
|
wesp32.menu.DebugLevel.debug=Debug
|
|
wesp32.menu.DebugLevel.debug.build.code_debug=4
|
|
wesp32.menu.DebugLevel.verbose=Verbose
|
|
wesp32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
wesp32.menu.EraseFlash.none=Disabled
|
|
wesp32.menu.EraseFlash.none.upload.erase_cmd=
|
|
wesp32.menu.EraseFlash.all=Enabled
|
|
wesp32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
t-beam.name=T-Beam
|
|
|
|
t-beam.bootloader.tool=esptool_py
|
|
t-beam.bootloader.tool.default=esptool_py
|
|
|
|
t-beam.upload.tool=esptool_py
|
|
t-beam.upload.tool.default=esptool_py
|
|
t-beam.upload.tool.network=esp_ota
|
|
|
|
t-beam.upload.maximum_size=1310720
|
|
t-beam.upload.maximum_data_size=327680
|
|
t-beam.upload.flags=
|
|
t-beam.upload.extra_flags=
|
|
|
|
t-beam.serial.disableDTR=true
|
|
t-beam.serial.disableRTS=true
|
|
|
|
t-beam.build.tarch=xtensa
|
|
t-beam.build.bootloader_addr=0x1000
|
|
t-beam.build.target=esp32
|
|
t-beam.build.mcu=esp32
|
|
t-beam.build.core=esp32
|
|
t-beam.build.variant=tbeam
|
|
t-beam.build.board=TBeam
|
|
|
|
t-beam.menu.Revision.Radio_SX1262=Radio-SX1262
|
|
t-beam.menu.Revision.Radio_SX1262.build.board=TBEAM_USE_RADIO_SX1262
|
|
t-beam.menu.Revision.Radio_SX1276=Radio-SX1276
|
|
t-beam.menu.Revision.Radio_SX1276.build.board=TBEAM_USE_RADIO_SX1276
|
|
t-beam.menu.Revision.Radio_SX1278=Radio-SX1278
|
|
t-beam.menu.Revision.Radio_SX1278.build.board=TBEAM_USE_RADIO_SX1278
|
|
t-beam.menu.Revision.Radio_SX1280=Radio-SX1280
|
|
t-beam.menu.Revision.Radio_SX1280.build.board=TBEAM_USE_RADIO_SX1280
|
|
t-beam.menu.Revision.Radio_SX1268=Radio-SX1268
|
|
t-beam.menu.Revision.Radio_SX1268.build.board=TBEAM_USE_RADIO_SX1268
|
|
|
|
t-beam.build.f_cpu=240000000L
|
|
t-beam.build.flash_mode=dio
|
|
t-beam.build.flash_size=4MB
|
|
t-beam.build.boot=dio
|
|
t-beam.build.partitions=default
|
|
|
|
t-beam.menu.PSRAM.disabled=Disabled
|
|
t-beam.menu.PSRAM.disabled.build.defines=
|
|
t-beam.menu.PSRAM.disabled.build.extra_libs=
|
|
t-beam.menu.PSRAM.enabled=Enabled
|
|
t-beam.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
t-beam.menu.PSRAM.enabled.build.extra_libs=
|
|
|
|
t-beam.menu.FlashFreq.80=80MHz
|
|
t-beam.menu.FlashFreq.80.build.flash_freq=80m
|
|
t-beam.menu.FlashFreq.40=40MHz
|
|
t-beam.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
t-beam.menu.UploadSpeed.921600=921600
|
|
t-beam.menu.UploadSpeed.921600.upload.speed=921600
|
|
t-beam.menu.UploadSpeed.115200=115200
|
|
t-beam.menu.UploadSpeed.115200.upload.speed=115200
|
|
t-beam.menu.UploadSpeed.256000.windows=256000
|
|
t-beam.menu.UploadSpeed.256000.upload.speed=256000
|
|
t-beam.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
t-beam.menu.UploadSpeed.230400=230400
|
|
t-beam.menu.UploadSpeed.230400.upload.speed=230400
|
|
t-beam.menu.UploadSpeed.460800.linux=460800
|
|
t-beam.menu.UploadSpeed.460800.macosx=460800
|
|
t-beam.menu.UploadSpeed.460800.upload.speed=460800
|
|
t-beam.menu.UploadSpeed.512000.windows=512000
|
|
t-beam.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
t-beam.menu.DebugLevel.none=None
|
|
t-beam.menu.DebugLevel.none.build.code_debug=0
|
|
t-beam.menu.DebugLevel.error=Error
|
|
t-beam.menu.DebugLevel.error.build.code_debug=1
|
|
t-beam.menu.DebugLevel.warn=Warn
|
|
t-beam.menu.DebugLevel.warn.build.code_debug=2
|
|
t-beam.menu.DebugLevel.info=Info
|
|
t-beam.menu.DebugLevel.info.build.code_debug=3
|
|
t-beam.menu.DebugLevel.debug=Debug
|
|
t-beam.menu.DebugLevel.debug.build.code_debug=4
|
|
t-beam.menu.DebugLevel.verbose=Verbose
|
|
t-beam.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
t-beam.menu.EraseFlash.none=Disabled
|
|
t-beam.menu.EraseFlash.none.upload.erase_cmd=
|
|
t-beam.menu.EraseFlash.all=Enabled
|
|
t-beam.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
d-duino-32.name=D-duino-32
|
|
|
|
d-duino-32.bootloader.tool=esptool_py
|
|
d-duino-32.bootloader.tool.default=esptool_py
|
|
|
|
d-duino-32.upload.tool=esptool_py
|
|
d-duino-32.upload.tool.default=esptool_py
|
|
d-duino-32.upload.tool.network=esp_ota
|
|
|
|
d-duino-32.upload.maximum_size=1310720
|
|
d-duino-32.upload.maximum_data_size=327680
|
|
d-duino-32.upload.flags=
|
|
d-duino-32.upload.extra_flags=
|
|
|
|
d-duino-32.serial.disableDTR=true
|
|
d-duino-32.serial.disableRTS=true
|
|
|
|
d-duino-32.build.tarch=xtensa
|
|
d-duino-32.build.bootloader_addr=0x1000
|
|
d-duino-32.build.target=esp32
|
|
d-duino-32.build.mcu=esp32
|
|
d-duino-32.build.core=esp32
|
|
d-duino-32.build.variant=d-duino-32
|
|
d-duino-32.build.board=D_Duino_32
|
|
|
|
d-duino-32.build.f_cpu=240000000L
|
|
d-duino-32.build.flash_size=4MB
|
|
d-duino-32.build.flash_freq=40m
|
|
d-duino-32.build.flash_mode=dio
|
|
d-duino-32.build.boot=dio
|
|
d-duino-32.build.partitions=default
|
|
d-duino-32.build.defines=
|
|
|
|
d-duino-32.menu.PartitionScheme.default=Default
|
|
d-duino-32.menu.PartitionScheme.default.build.partitions=default
|
|
d-duino-32.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
|
|
d-duino-32.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
d-duino-32.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
d-duino-32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
d-duino-32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
d-duino-32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
d-duino-32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
d-duino-32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
d-duino-32.menu.PartitionScheme.fatflash=16M Fat
|
|
d-duino-32.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
|
|
d-duino-32.menu.FlashFreq.80=80MHz
|
|
d-duino-32.menu.FlashFreq.80.build.flash_freq=80m
|
|
d-duino-32.menu.FlashFreq.40=40MHz
|
|
d-duino-32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
d-duino-32.menu.UploadSpeed.921600=921600
|
|
d-duino-32.menu.UploadSpeed.921600.upload.speed=921600
|
|
d-duino-32.menu.UploadSpeed.115200=115200
|
|
d-duino-32.menu.UploadSpeed.115200.upload.speed=115200
|
|
d-duino-32.menu.UploadSpeed.256000.windows=256000
|
|
d-duino-32.menu.UploadSpeed.256000.upload.speed=256000
|
|
d-duino-32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
d-duino-32.menu.UploadSpeed.230400=230400
|
|
d-duino-32.menu.UploadSpeed.230400.upload.speed=230400
|
|
d-duino-32.menu.UploadSpeed.460800.linux=460800
|
|
d-duino-32.menu.UploadSpeed.460800.macosx=460800
|
|
d-duino-32.menu.UploadSpeed.460800.upload.speed=460800
|
|
d-duino-32.menu.UploadSpeed.512000.windows=512000
|
|
d-duino-32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
d-duino-32.menu.DebugLevel.none=None
|
|
d-duino-32.menu.DebugLevel.none.build.code_debug=0
|
|
d-duino-32.menu.DebugLevel.error=Error
|
|
d-duino-32.menu.DebugLevel.error.build.code_debug=1
|
|
d-duino-32.menu.DebugLevel.warn=Warn
|
|
d-duino-32.menu.DebugLevel.warn.build.code_debug=2
|
|
d-duino-32.menu.DebugLevel.info=Info
|
|
d-duino-32.menu.DebugLevel.info.build.code_debug=3
|
|
d-duino-32.menu.DebugLevel.debug=Debug
|
|
d-duino-32.menu.DebugLevel.debug.build.code_debug=4
|
|
d-duino-32.menu.DebugLevel.verbose=Verbose
|
|
d-duino-32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
d-duino-32.menu.EraseFlash.none=Disabled
|
|
d-duino-32.menu.EraseFlash.none.upload.erase_cmd=
|
|
d-duino-32.menu.EraseFlash.all=Enabled
|
|
d-duino-32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
lopy.name=LoPy
|
|
|
|
lopy.bootloader.tool=esptool_py
|
|
lopy.bootloader.tool.default=esptool_py
|
|
|
|
lopy.upload.tool=esptool_py
|
|
lopy.upload.tool.default=esptool_py
|
|
lopy.upload.tool.network=esp_ota
|
|
|
|
lopy.upload.maximum_size=1310720
|
|
lopy.upload.maximum_data_size=327680
|
|
lopy.upload.flags=
|
|
lopy.upload.extra_flags=
|
|
|
|
lopy.serial.disableDTR=true
|
|
lopy.serial.disableRTS=true
|
|
|
|
lopy.build.tarch=xtensa
|
|
lopy.build.bootloader_addr=0x1000
|
|
lopy.build.target=esp32
|
|
lopy.build.mcu=esp32
|
|
lopy.build.core=esp32
|
|
lopy.build.variant=lopy
|
|
lopy.build.board=LoPy
|
|
|
|
lopy.build.f_cpu=240000000L
|
|
lopy.build.flash_mode=dio
|
|
lopy.build.flash_size=4MB
|
|
lopy.build.boot=dio
|
|
lopy.build.partitions=default
|
|
|
|
lopy.menu.FlashFreq.80=80MHz
|
|
lopy.menu.FlashFreq.80.build.flash_freq=80m
|
|
lopy.menu.FlashFreq.40=40MHz
|
|
lopy.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
lopy.menu.UploadSpeed.921600=921600
|
|
lopy.menu.UploadSpeed.921600.upload.speed=921600
|
|
lopy.menu.UploadSpeed.115200=115200
|
|
lopy.menu.UploadSpeed.115200.upload.speed=115200
|
|
lopy.menu.UploadSpeed.256000.windows=256000
|
|
lopy.menu.UploadSpeed.256000.upload.speed=256000
|
|
lopy.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
lopy.menu.UploadSpeed.230400=230400
|
|
lopy.menu.UploadSpeed.230400.upload.speed=230400
|
|
lopy.menu.UploadSpeed.460800.linux=460800
|
|
lopy.menu.UploadSpeed.460800.macosx=460800
|
|
lopy.menu.UploadSpeed.460800.upload.speed=460800
|
|
lopy.menu.UploadSpeed.512000.windows=512000
|
|
lopy.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
lopy.menu.DebugLevel.none=None
|
|
lopy.menu.DebugLevel.none.build.code_debug=0
|
|
lopy.menu.DebugLevel.error=Error
|
|
lopy.menu.DebugLevel.error.build.code_debug=1
|
|
lopy.menu.DebugLevel.warn=Warn
|
|
lopy.menu.DebugLevel.warn.build.code_debug=2
|
|
lopy.menu.DebugLevel.info=Info
|
|
lopy.menu.DebugLevel.info.build.code_debug=3
|
|
lopy.menu.DebugLevel.debug=Debug
|
|
lopy.menu.DebugLevel.debug.build.code_debug=4
|
|
lopy.menu.DebugLevel.verbose=Verbose
|
|
lopy.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lopy.menu.EraseFlash.none=Disabled
|
|
lopy.menu.EraseFlash.none.upload.erase_cmd=
|
|
lopy.menu.EraseFlash.all=Enabled
|
|
lopy.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
lopy4.name=LoPy4
|
|
|
|
lopy4.bootloader.tool=esptool_py
|
|
lopy4.bootloader.tool.default=esptool_py
|
|
|
|
lopy4.upload.tool=esptool_py
|
|
lopy4.upload.tool.default=esptool_py
|
|
lopy4.upload.tool.network=esp_ota
|
|
|
|
lopy4.upload.maximum_size=1310720
|
|
lopy4.upload.maximum_data_size=327680
|
|
lopy4.upload.flags=
|
|
lopy4.upload.extra_flags=
|
|
|
|
lopy4.serial.disableDTR=true
|
|
lopy4.serial.disableRTS=true
|
|
|
|
lopy4.build.tarch=xtensa
|
|
lopy4.build.bootloader_addr=0x1000
|
|
lopy4.build.target=esp32
|
|
lopy4.build.mcu=esp32
|
|
lopy4.build.core=esp32
|
|
lopy4.build.variant=lopy4
|
|
lopy4.build.board=LoPy4
|
|
|
|
lopy4.build.f_cpu=240000000L
|
|
lopy4.build.flash_mode=dio
|
|
lopy4.build.flash_size=4MB
|
|
lopy4.build.boot=dio
|
|
lopy4.build.partitions=default
|
|
|
|
lopy4.menu.PSRAM.disabled=Disabled
|
|
lopy4.menu.PSRAM.disabled.build.defines=
|
|
lopy4.menu.PSRAM.disabled.build.extra_libs=
|
|
lopy4.menu.PSRAM.enabled=Enabled
|
|
lopy4.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
lopy4.menu.PSRAM.enabled.build.extra_libs=
|
|
|
|
lopy4.menu.FlashFreq.80=80MHz
|
|
lopy4.menu.FlashFreq.80.build.flash_freq=80m
|
|
lopy4.menu.FlashFreq.40=40MHz
|
|
lopy4.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
lopy4.menu.UploadSpeed.921600=921600
|
|
lopy4.menu.UploadSpeed.921600.upload.speed=921600
|
|
lopy4.menu.UploadSpeed.115200=115200
|
|
lopy4.menu.UploadSpeed.115200.upload.speed=115200
|
|
lopy4.menu.UploadSpeed.256000.windows=256000
|
|
lopy4.menu.UploadSpeed.256000.upload.speed=256000
|
|
lopy4.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
lopy4.menu.UploadSpeed.230400=230400
|
|
lopy4.menu.UploadSpeed.230400.upload.speed=230400
|
|
lopy4.menu.UploadSpeed.460800.linux=460800
|
|
lopy4.menu.UploadSpeed.460800.macosx=460800
|
|
lopy4.menu.UploadSpeed.460800.upload.speed=460800
|
|
lopy4.menu.UploadSpeed.512000.windows=512000
|
|
lopy4.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
lopy4.menu.DebugLevel.none=None
|
|
lopy4.menu.DebugLevel.none.build.code_debug=0
|
|
lopy4.menu.DebugLevel.error=Error
|
|
lopy4.menu.DebugLevel.error.build.code_debug=1
|
|
lopy4.menu.DebugLevel.warn=Warn
|
|
lopy4.menu.DebugLevel.warn.build.code_debug=2
|
|
lopy4.menu.DebugLevel.info=Info
|
|
lopy4.menu.DebugLevel.info.build.code_debug=3
|
|
lopy4.menu.DebugLevel.debug=Debug
|
|
lopy4.menu.DebugLevel.debug.build.code_debug=4
|
|
lopy4.menu.DebugLevel.verbose=Verbose
|
|
lopy4.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lopy4.menu.EraseFlash.none=Disabled
|
|
lopy4.menu.EraseFlash.none.upload.erase_cmd=
|
|
lopy4.menu.EraseFlash.all=Enabled
|
|
lopy4.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
oroca_edubot.name=OROCA EduBot
|
|
|
|
oroca_edubot.bootloader.tool=esptool_py
|
|
oroca_edubot.bootloader.tool.default=esptool_py
|
|
|
|
oroca_edubot.upload.tool=esptool_py
|
|
oroca_edubot.upload.tool.default=esptool_py
|
|
oroca_edubot.upload.tool.network=esp_ota
|
|
|
|
oroca_edubot.upload.maximum_size=3145728
|
|
oroca_edubot.upload.maximum_data_size=327680
|
|
oroca_edubot.upload.flags=
|
|
oroca_edubot.upload.extra_flags=
|
|
|
|
oroca_edubot.serial.disableDTR=true
|
|
oroca_edubot.serial.disableRTS=true
|
|
|
|
oroca_edubot.build.tarch=xtensa
|
|
oroca_edubot.build.bootloader_addr=0x1000
|
|
oroca_edubot.build.target=esp32
|
|
oroca_edubot.build.mcu=esp32
|
|
oroca_edubot.build.core=esp32
|
|
oroca_edubot.build.variant=oroca_edubot
|
|
oroca_edubot.build.board=OROCA_EDUBOT
|
|
|
|
oroca_edubot.build.f_cpu=240000000L
|
|
oroca_edubot.build.flash_mode=dio
|
|
oroca_edubot.build.flash_size=4MB
|
|
oroca_edubot.build.boot=dio
|
|
oroca_edubot.build.partitions=huge_app
|
|
oroca_edubot.build.defines=
|
|
|
|
oroca_edubot.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA)
|
|
oroca_edubot.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
oroca_edubot.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
oroca_edubot.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
oroca_edubot.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
oroca_edubot.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
oroca_edubot.menu.FlashFreq.80=80MHz
|
|
oroca_edubot.menu.FlashFreq.80.build.flash_freq=80m
|
|
oroca_edubot.menu.FlashFreq.40=40MHz
|
|
oroca_edubot.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
oroca_edubot.menu.UploadSpeed.921600=921600
|
|
oroca_edubot.menu.UploadSpeed.921600.upload.speed=921600
|
|
oroca_edubot.menu.UploadSpeed.115200=115200
|
|
oroca_edubot.menu.UploadSpeed.115200.upload.speed=115200
|
|
oroca_edubot.menu.UploadSpeed.256000.windows=256000
|
|
oroca_edubot.menu.UploadSpeed.256000.upload.speed=256000
|
|
oroca_edubot.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
oroca_edubot.menu.UploadSpeed.230400=230400
|
|
oroca_edubot.menu.UploadSpeed.230400.upload.speed=230400
|
|
oroca_edubot.menu.UploadSpeed.460800.linux=460800
|
|
oroca_edubot.menu.UploadSpeed.460800.macosx=460800
|
|
oroca_edubot.menu.UploadSpeed.460800.upload.speed=460800
|
|
oroca_edubot.menu.UploadSpeed.512000.windows=512000
|
|
oroca_edubot.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
oroca_edubot.menu.DebugLevel.none=None
|
|
oroca_edubot.menu.DebugLevel.none.build.code_debug=0
|
|
oroca_edubot.menu.DebugLevel.error=Error
|
|
oroca_edubot.menu.DebugLevel.error.build.code_debug=1
|
|
oroca_edubot.menu.DebugLevel.warn=Warn
|
|
oroca_edubot.menu.DebugLevel.warn.build.code_debug=2
|
|
oroca_edubot.menu.DebugLevel.info=Info
|
|
oroca_edubot.menu.DebugLevel.info.build.code_debug=3
|
|
oroca_edubot.menu.DebugLevel.debug=Debug
|
|
oroca_edubot.menu.DebugLevel.debug.build.code_debug=4
|
|
oroca_edubot.menu.DebugLevel.verbose=Verbose
|
|
oroca_edubot.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
oroca_edubot.menu.EraseFlash.none=Disabled
|
|
oroca_edubot.menu.EraseFlash.none.upload.erase_cmd=
|
|
oroca_edubot.menu.EraseFlash.all=Enabled
|
|
oroca_edubot.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
fm-devkit.name=ESP32 FM DevKit
|
|
|
|
fm-devkit.upload.tool=esptool_py
|
|
fm-devkit.upload.tool.default=esptool_py
|
|
fm-devkit.upload.tool.network=esp_ota
|
|
|
|
fm-devkit.upload.maximum_size=1310720
|
|
fm-devkit.upload.maximum_data_size=327680
|
|
fm-devkit.upload.flags=
|
|
fm-devkit.upload.extra_flags=
|
|
|
|
fm-devkit.serial.disableDTR=true
|
|
fm-devkit.serial.disableRTS=true
|
|
|
|
fm-devkit.build.tarch=xtensa
|
|
fm-devkit.build.bootloader_addr=0x1000
|
|
fm-devkit.build.target=esp32
|
|
fm-devkit.build.mcu=esp32
|
|
fm-devkit.build.core=esp32
|
|
fm-devkit.build.variant=fm-devkit
|
|
fm-devkit.build.board=fm_devkit
|
|
|
|
fm-devkit.build.f_cpu=240000000L
|
|
fm-devkit.build.flash_size=4MB
|
|
fm-devkit.build.flash_freq=80m
|
|
fm-devkit.build.flash_mode=dio
|
|
fm-devkit.build.boot=dio
|
|
fm-devkit.build.partitions=default
|
|
fm-devkit.build.defines=
|
|
|
|
fm-devkit.menu.UploadSpeed.921600=921600
|
|
fm-devkit.menu.UploadSpeed.921600.upload.speed=921600
|
|
fm-devkit.menu.UploadSpeed.115200=115200
|
|
fm-devkit.menu.UploadSpeed.115200.upload.speed=115200
|
|
fm-devkit.menu.UploadSpeed.256000.windows=256000
|
|
fm-devkit.menu.UploadSpeed.256000.upload.speed=256000
|
|
fm-devkit.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
fm-devkit.menu.UploadSpeed.230400=230400
|
|
fm-devkit.menu.UploadSpeed.230400.upload.speed=230400
|
|
fm-devkit.menu.UploadSpeed.460800.linux=460800
|
|
fm-devkit.menu.UploadSpeed.460800.macosx=460800
|
|
fm-devkit.menu.UploadSpeed.460800.upload.speed=460800
|
|
fm-devkit.menu.UploadSpeed.512000.windows=512000
|
|
fm-devkit.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
fm-devkit.menu.DebugLevel.none=None
|
|
fm-devkit.menu.DebugLevel.none.build.code_debug=0
|
|
fm-devkit.menu.DebugLevel.error=Error
|
|
fm-devkit.menu.DebugLevel.error.build.code_debug=1
|
|
fm-devkit.menu.DebugLevel.warn=Warn
|
|
fm-devkit.menu.DebugLevel.warn.build.code_debug=2
|
|
fm-devkit.menu.DebugLevel.info=Info
|
|
fm-devkit.menu.DebugLevel.info.build.code_debug=3
|
|
fm-devkit.menu.DebugLevel.debug=Debug
|
|
fm-devkit.menu.DebugLevel.debug.build.code_debug=4
|
|
fm-devkit.menu.DebugLevel.verbose=Verbose
|
|
fm-devkit.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
fm-devkit.menu.EraseFlash.none=Disabled
|
|
fm-devkit.menu.EraseFlash.none.upload.erase_cmd=
|
|
fm-devkit.menu.EraseFlash.all=Enabled
|
|
fm-devkit.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
### Fri3d Badge 2024 (ESP32-S3-WROOM-1)
|
|
|
|
fri3d_2024_esp32s3.name=Fri3d Badge 2024 (ESP32-S3-WROOM-1)
|
|
|
|
fri3d_2024_esp32s3.bootloader.tool=esptool_py
|
|
fri3d_2024_esp32s3.bootloader.tool.default=esptool_py
|
|
|
|
fri3d_2024_esp32s3.upload.tool=esptool_py
|
|
fri3d_2024_esp32s3.upload.tool.default=esptool_py
|
|
fri3d_2024_esp32s3.upload.tool.network=esp_ota
|
|
|
|
fri3d_2024_esp32s3.upload.maximum_size=1310720
|
|
fri3d_2024_esp32s3.upload.maximum_data_size=327680
|
|
fri3d_2024_esp32s3.upload.flags=
|
|
fri3d_2024_esp32s3.upload.extra_flags=
|
|
fri3d_2024_esp32s3.upload.use_1200bps_touch=false
|
|
fri3d_2024_esp32s3.upload.wait_for_upload_port=false
|
|
|
|
fri3d_2024_esp32s3.serial.disableDTR=false
|
|
fri3d_2024_esp32s3.serial.disableRTS=false
|
|
|
|
fri3d_2024_esp32s3.build.tarch=xtensa
|
|
fri3d_2024_esp32s3.build.bootloader_addr=0x0
|
|
fri3d_2024_esp32s3.build.target=esp32s3
|
|
fri3d_2024_esp32s3.build.mcu=esp32s3
|
|
fri3d_2024_esp32s3.build.core=esp32
|
|
fri3d_2024_esp32s3.build.variant=fri3d_2024_esp32s3
|
|
fri3d_2024_esp32s3.build.board=FRI3D_2024_ESP32S3
|
|
|
|
fri3d_2024_esp32s3.build.usb_mode=1
|
|
fri3d_2024_esp32s3.build.cdc_on_boot=0
|
|
fri3d_2024_esp32s3.build.msc_on_boot=0
|
|
fri3d_2024_esp32s3.build.dfu_on_boot=0
|
|
fri3d_2024_esp32s3.build.f_cpu=240000000L
|
|
fri3d_2024_esp32s3.build.flash_size=16MB
|
|
fri3d_2024_esp32s3.build.flash_freq=80m
|
|
fri3d_2024_esp32s3.build.flash_mode=dio
|
|
fri3d_2024_esp32s3.build.boot=qio
|
|
fri3d_2024_esp32s3.build.boot_freq=80m
|
|
fri3d_2024_esp32s3.build.partitions=default
|
|
fri3d_2024_esp32s3.build.defines=
|
|
fri3d_2024_esp32s3.build.loop_core=
|
|
fri3d_2024_esp32s3.build.event_core=
|
|
fri3d_2024_esp32s3.build.psram_type=opi
|
|
fri3d_2024_esp32s3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
fri3d_2024_esp32s3.menu.JTAGAdapter.default=Disabled
|
|
fri3d_2024_esp32s3.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
fri3d_2024_esp32s3.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
fri3d_2024_esp32s3.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
fri3d_2024_esp32s3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
fri3d_2024_esp32s3.menu.JTAGAdapter.external=FTDI Adapter
|
|
fri3d_2024_esp32s3.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
fri3d_2024_esp32s3.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
fri3d_2024_esp32s3.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
fri3d_2024_esp32s3.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
fri3d_2024_esp32s3.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
fri3d_2024_esp32s3.menu.PSRAM.default=OPI PSRAM
|
|
fri3d_2024_esp32s3.menu.PSRAM.default.build.defines=-DBOARD_HAS_PSRAM
|
|
fri3d_2024_esp32s3.menu.PSRAM.default.build.psram_type=opi
|
|
fri3d_2024_esp32s3.menu.PSRAM.disabled=Disabled
|
|
fri3d_2024_esp32s3.menu.PSRAM.disabled.build.defines=
|
|
fri3d_2024_esp32s3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
|
|
fri3d_2024_esp32s3.menu.FlashMode.qio=QIO 80MHz
|
|
fri3d_2024_esp32s3.menu.FlashMode.qio.build.flash_mode=dio
|
|
fri3d_2024_esp32s3.menu.FlashMode.qio.build.boot=qio
|
|
fri3d_2024_esp32s3.menu.FlashMode.qio.build.boot_freq=80m
|
|
fri3d_2024_esp32s3.menu.FlashMode.qio.build.flash_freq=80m
|
|
fri3d_2024_esp32s3.menu.FlashMode.qio120=QIO 120MHz
|
|
fri3d_2024_esp32s3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
fri3d_2024_esp32s3.menu.FlashMode.qio120.build.boot=qio
|
|
fri3d_2024_esp32s3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
fri3d_2024_esp32s3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
fri3d_2024_esp32s3.menu.FlashMode.dio=DIO 80MHz
|
|
fri3d_2024_esp32s3.menu.FlashMode.dio.build.flash_mode=dio
|
|
fri3d_2024_esp32s3.menu.FlashMode.dio.build.boot=dio
|
|
fri3d_2024_esp32s3.menu.FlashMode.dio.build.boot_freq=80m
|
|
fri3d_2024_esp32s3.menu.FlashMode.dio.build.flash_freq=80m
|
|
fri3d_2024_esp32s3.menu.FlashMode.opi=OPI 80MHz
|
|
fri3d_2024_esp32s3.menu.FlashMode.opi.build.flash_mode=dout
|
|
fri3d_2024_esp32s3.menu.FlashMode.opi.build.boot=opi
|
|
fri3d_2024_esp32s3.menu.FlashMode.opi.build.boot_freq=80m
|
|
fri3d_2024_esp32s3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
fri3d_2024_esp32s3.menu.FlashSize.default=16MB (128Mb)
|
|
fri3d_2024_esp32s3.menu.FlashSize.default.build.flash_size=16MB
|
|
|
|
fri3d_2024_esp32s3.menu.LoopCore.1=Core 1
|
|
fri3d_2024_esp32s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
fri3d_2024_esp32s3.menu.LoopCore.0=Core 0
|
|
fri3d_2024_esp32s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
fri3d_2024_esp32s3.menu.EventsCore.1=Core 1
|
|
fri3d_2024_esp32s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
fri3d_2024_esp32s3.menu.EventsCore.0=Core 0
|
|
fri3d_2024_esp32s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
fri3d_2024_esp32s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
fri3d_2024_esp32s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
fri3d_2024_esp32s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
fri3d_2024_esp32s3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
fri3d_2024_esp32s3.menu.CDCOnBoot.default=Enabled
|
|
fri3d_2024_esp32s3.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
fri3d_2024_esp32s3.menu.CDCOnBoot.disabled=Disabled
|
|
fri3d_2024_esp32s3.menu.CDCOnBoot.disabled.build.cdc_on_boot=0
|
|
|
|
fri3d_2024_esp32s3.menu.MSCOnBoot.default=Disabled
|
|
fri3d_2024_esp32s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
fri3d_2024_esp32s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
fri3d_2024_esp32s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
fri3d_2024_esp32s3.menu.DFUOnBoot.default=Disabled
|
|
fri3d_2024_esp32s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
fri3d_2024_esp32s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
fri3d_2024_esp32s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
fri3d_2024_esp32s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
fri3d_2024_esp32s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
fri3d_2024_esp32s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
fri3d_2024_esp32s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
fri3d_2024_esp32s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
fri3d_2024_esp32s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.default.build.partitions=default
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.rainmaker=RainMaker
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
fri3d_2024_esp32s3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
fri3d_2024_esp32s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
fri3d_2024_esp32s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
fri3d_2024_esp32s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
fri3d_2024_esp32s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
fri3d_2024_esp32s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
fri3d_2024_esp32s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
fri3d_2024_esp32s3.menu.CPUFreq.40=40MHz
|
|
fri3d_2024_esp32s3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
fri3d_2024_esp32s3.menu.CPUFreq.20=20MHz
|
|
fri3d_2024_esp32s3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
fri3d_2024_esp32s3.menu.CPUFreq.10=10MHz
|
|
fri3d_2024_esp32s3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
fri3d_2024_esp32s3.menu.UploadSpeed.921600=921600
|
|
fri3d_2024_esp32s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
fri3d_2024_esp32s3.menu.UploadSpeed.115200=115200
|
|
fri3d_2024_esp32s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
fri3d_2024_esp32s3.menu.UploadSpeed.256000.windows=256000
|
|
fri3d_2024_esp32s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
fri3d_2024_esp32s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
fri3d_2024_esp32s3.menu.UploadSpeed.230400=230400
|
|
fri3d_2024_esp32s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
fri3d_2024_esp32s3.menu.UploadSpeed.460800.linux=460800
|
|
fri3d_2024_esp32s3.menu.UploadSpeed.460800.macosx=460800
|
|
fri3d_2024_esp32s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
fri3d_2024_esp32s3.menu.UploadSpeed.512000.windows=512000
|
|
fri3d_2024_esp32s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
fri3d_2024_esp32s3.menu.DebugLevel.none=None
|
|
fri3d_2024_esp32s3.menu.DebugLevel.none.build.code_debug=0
|
|
fri3d_2024_esp32s3.menu.DebugLevel.error=Error
|
|
fri3d_2024_esp32s3.menu.DebugLevel.error.build.code_debug=1
|
|
fri3d_2024_esp32s3.menu.DebugLevel.warn=Warn
|
|
fri3d_2024_esp32s3.menu.DebugLevel.warn.build.code_debug=2
|
|
fri3d_2024_esp32s3.menu.DebugLevel.info=Info
|
|
fri3d_2024_esp32s3.menu.DebugLevel.info.build.code_debug=3
|
|
fri3d_2024_esp32s3.menu.DebugLevel.debug=Debug
|
|
fri3d_2024_esp32s3.menu.DebugLevel.debug.build.code_debug=4
|
|
fri3d_2024_esp32s3.menu.DebugLevel.verbose=Verbose
|
|
fri3d_2024_esp32s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
fri3d_2024_esp32s3.menu.EraseFlash.none=Disabled
|
|
fri3d_2024_esp32s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
fri3d_2024_esp32s3.menu.EraseFlash.all=Enabled
|
|
fri3d_2024_esp32s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
frogboard.name=Frog Board ESP32
|
|
|
|
frogboard.bootloader.tool=esptool_py
|
|
frogboard.bootloader.tool.default=esptool_py
|
|
|
|
frogboard.upload.tool=esptool_py
|
|
frogboard.upload.tool.default=esptool_py
|
|
frogboard.upload.tool.network=esp_ota
|
|
|
|
frogboard.upload.maximum_size=1310720
|
|
frogboard.upload.maximum_data_size=327680
|
|
frogboard.upload.flags=
|
|
frogboard.upload.extra_flags=
|
|
|
|
frogboard.serial.disableDTR=true
|
|
frogboard.serial.disableRTS=true
|
|
|
|
frogboard.build.tarch=xtensa
|
|
frogboard.build.bootloader_addr=0x1000
|
|
frogboard.build.target=esp32
|
|
frogboard.build.mcu=esp32
|
|
frogboard.build.core=esp32
|
|
frogboard.build.variant=frog32
|
|
frogboard.build.board=FROG_ESP32
|
|
frogboard.build.f_cpu=240000000L
|
|
frogboard.build.flash_size=4MB
|
|
frogboard.build.flash_freq=40m
|
|
frogboard.build.flash_mode=dio
|
|
frogboard.build.boot=dio
|
|
frogboard.build.partitions=default
|
|
frogboard.build.defines=
|
|
|
|
frogboard.menu.PSRAM.disabled=Disabled
|
|
frogboard.menu.PSRAM.disabled.build.defines=
|
|
frogboard.menu.PSRAM.disabled.build.extra_libs=
|
|
frogboard.menu.PSRAM.enabled=Enabled
|
|
frogboard.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
frogboard.menu.PSRAM.enabled.build.extra_libs=
|
|
|
|
frogboard.menu.PartitionScheme.default=Default
|
|
frogboard.menu.PartitionScheme.default.build.partitions=default
|
|
frogboard.menu.PartitionScheme.minimal=Minimal (2MB FLASH)
|
|
frogboard.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
frogboard.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
frogboard.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
frogboard.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
frogboard.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
frogboard.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
frogboard.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
frogboard.menu.FlashMode.qio=QIO
|
|
frogboard.menu.FlashMode.qio.build.flash_mode=dio
|
|
frogboard.menu.FlashMode.qio.build.boot=qio
|
|
frogboard.menu.FlashMode.dio=DIO
|
|
frogboard.menu.FlashMode.dio.build.flash_mode=dio
|
|
frogboard.menu.FlashMode.dio.build.boot=dio
|
|
frogboard.menu.FlashFreq.80=80MHz
|
|
frogboard.menu.FlashFreq.80.build.flash_freq=80m
|
|
frogboard.menu.FlashFreq.40=40MHz
|
|
frogboard.menu.FlashFreq.40.build.flash_freq=40m
|
|
frogboard.menu.FlashSize.4M=4MB (32Mb)
|
|
frogboard.menu.FlashSize.4M.build.flash_size=4MB
|
|
frogboard.menu.FlashSize.2M=2MB (16Mb)
|
|
frogboard.menu.FlashSize.2M.build.flash_size=2MB
|
|
frogboard.menu.FlashSize.2M.build.partitions=minimal
|
|
|
|
frogboard.menu.UploadSpeed.921600=921600
|
|
frogboard.menu.UploadSpeed.921600.upload.speed=921600
|
|
frogboard.menu.UploadSpeed.115200=115200
|
|
frogboard.menu.UploadSpeed.115200.upload.speed=115200
|
|
frogboard.menu.UploadSpeed.256000.windows=256000
|
|
frogboard.menu.UploadSpeed.256000.upload.speed=256000
|
|
frogboard.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
frogboard.menu.UploadSpeed.230400=230400
|
|
frogboard.menu.UploadSpeed.230400.upload.speed=230400
|
|
frogboard.menu.UploadSpeed.460800.linux=460800
|
|
frogboard.menu.UploadSpeed.460800.macosx=460800
|
|
frogboard.menu.UploadSpeed.460800.upload.speed=460800
|
|
frogboard.menu.UploadSpeed.512000.windows=512000
|
|
frogboard.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
frogboard.menu.DebugLevel.none=None
|
|
frogboard.menu.DebugLevel.none.build.code_debug=0
|
|
frogboard.menu.DebugLevel.error=Error
|
|
frogboard.menu.DebugLevel.error.build.code_debug=1
|
|
frogboard.menu.DebugLevel.warn=Warn
|
|
frogboard.menu.DebugLevel.warn.build.code_debug=2
|
|
frogboard.menu.DebugLevel.info=Info
|
|
frogboard.menu.DebugLevel.info.build.code_debug=3
|
|
frogboard.menu.DebugLevel.debug=Debug
|
|
frogboard.menu.DebugLevel.debug.build.code_debug=4
|
|
frogboard.menu.DebugLevel.verbose=Verbose
|
|
frogboard.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
frogboard.menu.EraseFlash.none=Disabled
|
|
frogboard.menu.EraseFlash.none.upload.erase_cmd=
|
|
frogboard.menu.EraseFlash.all=Enabled
|
|
frogboard.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32cam.name=AI Thinker ESP32-CAM
|
|
|
|
esp32cam.bootloader.tool=esptool_py
|
|
esp32cam.bootloader.tool.default=esptool_py
|
|
|
|
esp32cam.upload.tool=esptool_py
|
|
esp32cam.upload.tool.default=esptool_py
|
|
esp32cam.upload.tool.network=esp_ota
|
|
|
|
esp32cam.upload.maximum_size=3145728
|
|
esp32cam.upload.maximum_data_size=327680
|
|
esp32cam.upload.flags=
|
|
esp32cam.upload.extra_flags=
|
|
esp32cam.upload.speed=460800
|
|
|
|
esp32cam.serial.disableDTR=true
|
|
esp32cam.serial.disableRTS=true
|
|
|
|
esp32cam.build.tarch=xtensa
|
|
esp32cam.build.bootloader_addr=0x1000
|
|
esp32cam.build.target=esp32
|
|
esp32cam.build.mcu=esp32
|
|
esp32cam.build.core=esp32
|
|
esp32cam.build.variant=esp32
|
|
esp32cam.build.board=ESP32_DEV
|
|
esp32cam.build.flash_size=4MB
|
|
esp32cam.build.partitions=huge_app
|
|
esp32cam.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
esp32cam.build.extra_libs=
|
|
esp32cam.build.code_debug=0
|
|
|
|
esp32cam.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
esp32cam.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
esp32cam.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
esp32cam.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32cam.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
esp32cam.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32cam.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
esp32cam.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32cam.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
esp32cam.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
esp32cam.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
esp32cam.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32cam.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
esp32cam.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
esp32cam.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
esp32cam.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32cam.menu.FlashMode.qio=QIO
|
|
esp32cam.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32cam.menu.FlashMode.qio.build.boot=qio
|
|
esp32cam.menu.FlashMode.dio=DIO
|
|
esp32cam.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32cam.menu.FlashMode.dio.build.boot=dio
|
|
|
|
esp32cam.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32cam.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32cam.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32cam.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32cam.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32cam.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32cam.menu.PartitionScheme.default=Regular 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32cam.menu.PartitionScheme.default.build.partitions=default
|
|
esp32cam.menu.PartitionScheme.defaultffat=Regular 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32cam.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32cam.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32cam.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32cam.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32cam.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32cam.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32cam.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32cam.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32cam.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32cam.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32cam.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32cam.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32cam.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32cam.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32cam.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
|
|
esp32cam.menu.FlashFreq.80=80MHz
|
|
esp32cam.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32cam.menu.FlashFreq.40=40MHz
|
|
esp32cam.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32cam.menu.DebugLevel.none=None
|
|
esp32cam.menu.DebugLevel.none.build.code_debug=0
|
|
esp32cam.menu.DebugLevel.error=Error
|
|
esp32cam.menu.DebugLevel.error.build.code_debug=1
|
|
esp32cam.menu.DebugLevel.warn=Warn
|
|
esp32cam.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32cam.menu.DebugLevel.info=Info
|
|
esp32cam.menu.DebugLevel.info.build.code_debug=3
|
|
esp32cam.menu.DebugLevel.debug=Debug
|
|
esp32cam.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32cam.menu.DebugLevel.verbose=Verbose
|
|
esp32cam.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32cam.menu.EraseFlash.none=Disabled
|
|
esp32cam.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32cam.menu.EraseFlash.all=Enabled
|
|
esp32cam.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
twatch.name=TTGO T-Watch
|
|
|
|
twatch.bootloader.tool=esptool_py
|
|
twatch.bootloader.tool.default=esptool_py
|
|
|
|
twatch.upload.tool=esptool_py
|
|
twatch.upload.tool.default=esptool_py
|
|
twatch.upload.tool.network=esp_ota
|
|
|
|
twatch.upload.maximum_size=6553600
|
|
twatch.upload.maximum_data_size=4521984
|
|
twatch.upload.wait_for_upload_port=true
|
|
twatch.upload.flags=
|
|
twatch.upload.extra_flags=
|
|
|
|
twatch.serial.disableDTR=true
|
|
twatch.serial.disableRTS=true
|
|
|
|
twatch.build.tarch=xtensa
|
|
twatch.build.bootloader_addr=0x1000
|
|
twatch.build.target=esp32
|
|
twatch.build.mcu=esp32
|
|
twatch.build.core=esp32
|
|
twatch.build.variant=twatch
|
|
twatch.build.board=TWatch
|
|
|
|
twatch.menu.Revision.TWATCH_BASE=T-Watch Base
|
|
twatch.menu.Revision.TWATCH_BASE.build.board=TWATCH_BASE
|
|
twatch.menu.Revision.TWATCH_2020_V1=T-Watch-2020-V1
|
|
twatch.menu.Revision.TWATCH_2020_V1.build.board=TWATCH_2020_V1
|
|
twatch.menu.Revision.TWATCH_2020_V2=T-Watch-2020-V2
|
|
twatch.menu.Revision.TWATCH_2020_V2.build.board=TWATCH_2020_V2
|
|
twatch.menu.Revision.TWATCH_2020_V3=T-Watch-2020-V3
|
|
twatch.menu.Revision.TWATCH_2020_V3.build.board=TWATCH_2020_V3
|
|
|
|
twatch.build.f_cpu=240000000L
|
|
twatch.build.flash_size=16MB
|
|
twatch.build.flash_freq=80m
|
|
twatch.build.flash_mode=dio
|
|
twatch.build.boot=dio
|
|
twatch.build.partitions=default_16MB
|
|
twatch.build.defines=
|
|
|
|
twatch.menu.PSRAM.enabled=Enabled
|
|
twatch.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
twatch.menu.PSRAM.enabled.build.extra_libs=
|
|
twatch.menu.PSRAM.disabled=Disabled
|
|
twatch.menu.PSRAM.disabled.build.defines=
|
|
twatch.menu.PSRAM.disabled.build.extra_libs=
|
|
|
|
twatch.menu.PartitionScheme.default=Default (2 x 6.5 MB app, 3.6 MB SPIFFS)
|
|
twatch.menu.PartitionScheme.default.build.partitions=default_16MB
|
|
twatch.menu.PartitionScheme.default.upload.maximum_size=6553600
|
|
twatch.menu.PartitionScheme.large_spiffs=Large SPIFFS (7 MB)
|
|
twatch.menu.PartitionScheme.large_spiffs.build.partitions=large_spiffs_16MB
|
|
twatch.menu.PartitionScheme.large_spiffs.upload.maximum_size=4685824
|
|
|
|
twatch.menu.UploadSpeed.2000000=2000000
|
|
twatch.menu.UploadSpeed.2000000.upload.speed=2000000
|
|
twatch.menu.UploadSpeed.1152000=1152000
|
|
twatch.menu.UploadSpeed.1152000.upload.speed=1152000
|
|
twatch.menu.UploadSpeed.921600=921600
|
|
twatch.menu.UploadSpeed.921600.upload.speed=921600
|
|
twatch.menu.UploadSpeed.115200=115200
|
|
twatch.menu.UploadSpeed.115200.upload.speed=115200
|
|
twatch.menu.UploadSpeed.256000.windows=256000
|
|
twatch.menu.UploadSpeed.256000.upload.speed=256000
|
|
twatch.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
twatch.menu.UploadSpeed.230400=230400
|
|
twatch.menu.UploadSpeed.230400.upload.speed=230400
|
|
twatch.menu.UploadSpeed.460800.linux=460800
|
|
twatch.menu.UploadSpeed.460800.macosx=460800
|
|
twatch.menu.UploadSpeed.460800.upload.speed=460800
|
|
twatch.menu.UploadSpeed.512000.windows=512000
|
|
twatch.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
twatch.menu.DebugLevel.none=None
|
|
twatch.menu.DebugLevel.none.build.code_debug=0
|
|
twatch.menu.DebugLevel.error=Error
|
|
twatch.menu.DebugLevel.error.build.code_debug=1
|
|
twatch.menu.DebugLevel.warn=Warn
|
|
twatch.menu.DebugLevel.warn.build.code_debug=2
|
|
twatch.menu.DebugLevel.info=Info
|
|
twatch.menu.DebugLevel.info.build.code_debug=3
|
|
twatch.menu.DebugLevel.debug=Debug
|
|
twatch.menu.DebugLevel.debug.build.code_debug=4
|
|
twatch.menu.DebugLevel.verbose=Verbose
|
|
twatch.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
twatch.menu.EraseFlash.none=Disabled
|
|
twatch.menu.EraseFlash.none.upload.erase_cmd=
|
|
twatch.menu.EraseFlash.all=Enabled
|
|
twatch.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
d1_mini32.name=WEMOS D1 MINI ESP32
|
|
|
|
d1_mini32.bootloader.tool=esptool_py
|
|
d1_mini32.bootloader.tool.default=esptool_py
|
|
|
|
d1_mini32.upload.tool=esptool_py
|
|
d1_mini32.upload.tool.default=esptool_py
|
|
d1_mini32.upload.tool.network=esp_ota
|
|
|
|
d1_mini32.upload.maximum_size=1310720
|
|
d1_mini32.upload.maximum_data_size=327680
|
|
d1_mini32.upload.flags=
|
|
d1_mini32.upload.extra_flags=
|
|
|
|
d1_mini32.serial.disableDTR=true
|
|
d1_mini32.serial.disableRTS=true
|
|
|
|
d1_mini32.build.tarch=xtensa
|
|
d1_mini32.build.bootloader_addr=0x1000
|
|
d1_mini32.build.target=esp32
|
|
d1_mini32.build.mcu=esp32
|
|
d1_mini32.build.core=esp32
|
|
d1_mini32.build.variant=d1_mini32
|
|
d1_mini32.build.board=D1_MINI32
|
|
|
|
d1_mini32.build.f_cpu=240000000L
|
|
d1_mini32.build.flash_mode=dio
|
|
d1_mini32.build.flash_size=4MB
|
|
d1_mini32.build.boot=dio
|
|
d1_mini32.build.partitions=default
|
|
d1_mini32.build.defines=
|
|
|
|
d1_mini32.menu.FlashFreq.80=80MHz
|
|
d1_mini32.menu.FlashFreq.80.build.flash_freq=80m
|
|
d1_mini32.menu.FlashFreq.40=40MHz
|
|
d1_mini32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
d1_mini32.menu.PartitionScheme.default=Default
|
|
d1_mini32.menu.PartitionScheme.default.build.partitions=default
|
|
d1_mini32.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
d1_mini32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
d1_mini32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
d1_mini32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
d1_mini32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
d1_mini32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
d1_mini32.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
d1_mini32.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
d1_mini32.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
d1_mini32.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
d1_mini32.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
d1_mini32.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
d1_mini32.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
d1_mini32.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
d1_mini32.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
d1_mini32.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
d1_mini32.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
d1_mini32.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
d1_mini32.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
d1_mini32.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
d1_mini32.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
d1_mini32.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
d1_mini32.menu.UploadSpeed.921600=921600
|
|
d1_mini32.menu.UploadSpeed.921600.upload.speed=921600
|
|
d1_mini32.menu.UploadSpeed.115200=115200
|
|
d1_mini32.menu.UploadSpeed.115200.upload.speed=115200
|
|
d1_mini32.menu.UploadSpeed.256000.windows=256000
|
|
d1_mini32.menu.UploadSpeed.256000.upload.speed=256000
|
|
d1_mini32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
d1_mini32.menu.UploadSpeed.230400=230400
|
|
d1_mini32.menu.UploadSpeed.230400.upload.speed=230400
|
|
d1_mini32.menu.UploadSpeed.460800.linux=460800
|
|
d1_mini32.menu.UploadSpeed.460800.macosx=460800
|
|
d1_mini32.menu.UploadSpeed.460800.upload.speed=460800
|
|
d1_mini32.menu.UploadSpeed.512000.windows=512000
|
|
d1_mini32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
d1_mini32.menu.DebugLevel.none=None
|
|
d1_mini32.menu.DebugLevel.none.build.code_debug=0
|
|
d1_mini32.menu.DebugLevel.error=Error
|
|
d1_mini32.menu.DebugLevel.error.build.code_debug=1
|
|
d1_mini32.menu.DebugLevel.warn=Warn
|
|
d1_mini32.menu.DebugLevel.warn.build.code_debug=2
|
|
d1_mini32.menu.DebugLevel.info=Info
|
|
d1_mini32.menu.DebugLevel.info.build.code_debug=3
|
|
d1_mini32.menu.DebugLevel.debug=Debug
|
|
d1_mini32.menu.DebugLevel.debug.build.code_debug=4
|
|
d1_mini32.menu.DebugLevel.verbose=Verbose
|
|
d1_mini32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
d1_mini32.menu.EraseFlash.none=Disabled
|
|
d1_mini32.menu.EraseFlash.none.upload.erase_cmd=
|
|
d1_mini32.menu.EraseFlash.all=Enabled
|
|
d1_mini32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
d1_uno32.name=WEMOS D1 R32
|
|
|
|
d1_uno32.bootloader.tool=esptool_py
|
|
d1_uno32.bootloader.tool.default=esptool_py
|
|
|
|
d1_uno32.upload.tool=esptool_py
|
|
d1_uno32.upload.tool.default=esptool_py
|
|
d1_uno32.upload.tool.network=esp_ota
|
|
|
|
d1_uno32.upload.maximum_size=1310720
|
|
d1_uno32.upload.maximum_data_size=327680
|
|
d1_uno32.upload.flags=
|
|
d1_uno32.upload.extra_flags=
|
|
|
|
d1_uno32.serial.disableDTR=true
|
|
d1_uno32.serial.disableRTS=true
|
|
|
|
d1_uno32.build.tarch=xtensa
|
|
d1_uno32.build.bootloader_addr=0x1000
|
|
d1_uno32.build.target=esp32
|
|
d1_uno32.build.mcu=esp32
|
|
d1_uno32.build.core=esp32
|
|
d1_uno32.build.variant=d1_uno32
|
|
d1_uno32.build.board=D1_UNO32
|
|
|
|
d1_uno32.build.f_cpu=240000000L
|
|
d1_uno32.build.flash_mode=dio
|
|
d1_uno32.build.flash_size=4MB
|
|
d1_uno32.build.boot=dio
|
|
d1_uno32.build.partitions=default
|
|
d1_uno32.build.defines=
|
|
|
|
d1_uno32.menu.FlashFreq.80=80MHz
|
|
d1_uno32.menu.FlashFreq.80.build.flash_freq=80m
|
|
d1_uno32.menu.FlashFreq.40=40MHz
|
|
d1_uno32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
d1_uno32.menu.PartitionScheme.default=Default
|
|
d1_uno32.menu.PartitionScheme.default.build.partitions=default
|
|
d1_uno32.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
d1_uno32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
d1_uno32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
d1_uno32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
d1_uno32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
d1_uno32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
d1_uno32.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
d1_uno32.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
d1_uno32.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
d1_uno32.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
d1_uno32.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
d1_uno32.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
d1_uno32.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
d1_uno32.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
d1_uno32.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
d1_uno32.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
d1_uno32.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
d1_uno32.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
d1_uno32.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
d1_uno32.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
d1_uno32.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
d1_uno32.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
d1_uno32.menu.UploadSpeed.921600=921600
|
|
d1_uno32.menu.UploadSpeed.921600.upload.speed=921600
|
|
d1_uno32.menu.UploadSpeed.115200=115200
|
|
d1_uno32.menu.UploadSpeed.115200.upload.speed=115200
|
|
d1_uno32.menu.UploadSpeed.256000.windows=256000
|
|
d1_uno32.menu.UploadSpeed.256000.upload.speed=256000
|
|
d1_uno32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
d1_uno32.menu.UploadSpeed.230400=230400
|
|
d1_uno32.menu.UploadSpeed.230400.upload.speed=230400
|
|
d1_uno32.menu.UploadSpeed.460800.linux=460800
|
|
d1_uno32.menu.UploadSpeed.460800.macosx=460800
|
|
d1_uno32.menu.UploadSpeed.460800.upload.speed=460800
|
|
d1_uno32.menu.UploadSpeed.512000.windows=512000
|
|
d1_uno32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
d1_uno32.menu.DebugLevel.none=None
|
|
d1_uno32.menu.DebugLevel.none.build.code_debug=0
|
|
d1_uno32.menu.DebugLevel.error=Error
|
|
d1_uno32.menu.DebugLevel.error.build.code_debug=1
|
|
d1_uno32.menu.DebugLevel.warn=Warn
|
|
d1_uno32.menu.DebugLevel.warn.build.code_debug=2
|
|
d1_uno32.menu.DebugLevel.info=Info
|
|
d1_uno32.menu.DebugLevel.info.build.code_debug=3
|
|
d1_uno32.menu.DebugLevel.debug=Debug
|
|
d1_uno32.menu.DebugLevel.debug.build.code_debug=4
|
|
d1_uno32.menu.DebugLevel.verbose=Verbose
|
|
d1_uno32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
d1_uno32.menu.EraseFlash.none=Disabled
|
|
d1_uno32.menu.EraseFlash.none.upload.erase_cmd=
|
|
d1_uno32.menu.EraseFlash.all=Enabled
|
|
d1_uno32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
gpy.name=Pycom GPy
|
|
|
|
gpy.bootloader.tool=esptool_py
|
|
gpy.bootloader.tool.default=esptool_py
|
|
|
|
gpy.upload.tool=esptool_py
|
|
gpy.upload.tool.default=esptool_py
|
|
gpy.upload.tool.network=esp_ota
|
|
|
|
gpy.upload.maximum_size=1310720
|
|
gpy.upload.maximum_data_size=327680
|
|
gpy.upload.flags=
|
|
gpy.upload.extra_flags=
|
|
|
|
gpy.serial.disableDTR=true
|
|
gpy.serial.disableRTS=true
|
|
|
|
gpy.build.tarch=xtensa
|
|
gpy.build.bootloader_addr=0x1000
|
|
gpy.build.target=esp32
|
|
gpy.build.mcu=esp32
|
|
gpy.build.core=esp32
|
|
gpy.build.variant=gpy
|
|
gpy.build.board=PYCOM_GPY
|
|
|
|
gpy.build.f_cpu=240000000L
|
|
gpy.build.flash_mode=dio
|
|
gpy.build.flash_size=8MB
|
|
gpy.build.boot=dio
|
|
gpy.build.partitions=default
|
|
|
|
gpy.menu.FlashFreq.80=80MHz
|
|
gpy.menu.FlashFreq.80.build.flash_freq=80m
|
|
gpy.menu.FlashFreq.40=40MHz
|
|
gpy.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
gpy.menu.UploadSpeed.921600=921600
|
|
gpy.menu.UploadSpeed.921600.upload.speed=921600
|
|
gpy.menu.UploadSpeed.115200=115200
|
|
gpy.menu.UploadSpeed.115200.upload.speed=115200
|
|
gpy.menu.UploadSpeed.256000.windows=256000
|
|
gpy.menu.UploadSpeed.256000.upload.speed=256000
|
|
gpy.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
gpy.menu.UploadSpeed.230400=230400
|
|
gpy.menu.UploadSpeed.230400.upload.speed=230400
|
|
gpy.menu.UploadSpeed.460800.linux=460800
|
|
gpy.menu.UploadSpeed.460800.macosx=460800
|
|
gpy.menu.UploadSpeed.460800.upload.speed=460800
|
|
gpy.menu.UploadSpeed.512000.windows=512000
|
|
gpy.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
gpy.menu.DebugLevel.none=None
|
|
gpy.menu.DebugLevel.none.build.code_debug=0
|
|
gpy.menu.DebugLevel.error=Error
|
|
gpy.menu.DebugLevel.error.build.code_debug=1
|
|
gpy.menu.DebugLevel.warn=Warn
|
|
gpy.menu.DebugLevel.warn.build.code_debug=2
|
|
gpy.menu.DebugLevel.info=Info
|
|
gpy.menu.DebugLevel.info.build.code_debug=3
|
|
gpy.menu.DebugLevel.debug=Debug
|
|
gpy.menu.DebugLevel.debug.build.code_debug=4
|
|
gpy.menu.DebugLevel.verbose=Verbose
|
|
gpy.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
gpy.menu.EraseFlash.none=Disabled
|
|
gpy.menu.EraseFlash.none.upload.erase_cmd=
|
|
gpy.menu.EraseFlash.all=Enabled
|
|
gpy.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
vintlabs-devkit-v1.name=VintLabs ESP32 Devkit
|
|
|
|
vintlabs-devkit-v1.bootloader.tool=esptool_py
|
|
vintlabs-devkit-v1.bootloader.tool.default=esptool_py
|
|
|
|
vintlabs-devkit-v1.upload.tool=esptool_py
|
|
vintlabs-devkit-v1.upload.tool.default=esptool_py
|
|
vintlabs-devkit-v1.upload.tool.network=esp_ota
|
|
|
|
vintlabs-devkit-v1.upload.maximum_size=1310720
|
|
vintlabs-devkit-v1.upload.maximum_data_size=327680
|
|
vintlabs-devkit-v1.upload.flags=
|
|
vintlabs-devkit-v1.upload.extra_flags=
|
|
|
|
vintlabs-devkit-v1.serial.disableDTR=true
|
|
vintlabs-devkit-v1.serial.disableRTS=true
|
|
|
|
vintlabs-devkit-v1.build.tarch=xtensa
|
|
vintlabs-devkit-v1.build.bootloader_addr=0x1000
|
|
vintlabs-devkit-v1.build.target=esp32
|
|
vintlabs-devkit-v1.build.mcu=esp32
|
|
vintlabs-devkit-v1.build.core=esp32
|
|
vintlabs-devkit-v1.build.variant=vintlabsdevkitv1
|
|
vintlabs-devkit-v1.build.board=ESP32_DEV
|
|
|
|
vintlabs-devkit-v1.build.f_cpu=240000000L
|
|
vintlabs-devkit-v1.build.flash_mode=dio
|
|
vintlabs-devkit-v1.build.flash_size=4MB
|
|
vintlabs-devkit-v1.build.boot=dio
|
|
vintlabs-devkit-v1.build.partitions=default
|
|
vintlabs-devkit-v1.build.defines=
|
|
|
|
vintlabs-devkit-v1.menu.FlashFreq.80=80MHz
|
|
vintlabs-devkit-v1.menu.FlashFreq.80.build.flash_freq=80m
|
|
vintlabs-devkit-v1.menu.FlashFreq.40=40MHz
|
|
vintlabs-devkit-v1.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
vintlabs-devkit-v1.menu.UploadSpeed.2000000=2000000
|
|
vintlabs-devkit-v1.menu.UploadSpeed.2000000.upload.speed=2000000
|
|
vintlabs-devkit-v1.menu.UploadSpeed.921600=921600
|
|
vintlabs-devkit-v1.menu.UploadSpeed.921600.upload.speed=921600
|
|
vintlabs-devkit-v1.menu.UploadSpeed.115200=115200
|
|
vintlabs-devkit-v1.menu.UploadSpeed.115200.upload.speed=115200
|
|
vintlabs-devkit-v1.menu.UploadSpeed.256000.windows=256000
|
|
vintlabs-devkit-v1.menu.UploadSpeed.256000.upload.speed=256000
|
|
vintlabs-devkit-v1.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
vintlabs-devkit-v1.menu.UploadSpeed.230400=230400
|
|
vintlabs-devkit-v1.menu.UploadSpeed.230400.upload.speed=230400
|
|
vintlabs-devkit-v1.menu.UploadSpeed.460800.linux=460800
|
|
vintlabs-devkit-v1.menu.UploadSpeed.460800.macosx=460800
|
|
vintlabs-devkit-v1.menu.UploadSpeed.460800.upload.speed=460800
|
|
vintlabs-devkit-v1.menu.UploadSpeed.512000.windows=512000
|
|
vintlabs-devkit-v1.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
vintlabs-devkit-v1.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
vintlabs-devkit-v1.menu.PartitionScheme.default.build.partitions=default
|
|
vintlabs-devkit-v1.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
vintlabs-devkit-v1.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
vintlabs-devkit-v1.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
vintlabs-devkit-v1.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
vintlabs-devkit-v1.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
vintlabs-devkit-v1.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
vintlabs-devkit-v1.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
vintlabs-devkit-v1.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
vintlabs-devkit-v1.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
vintlabs-devkit-v1.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
vintlabs-devkit-v1.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
vintlabs-devkit-v1.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
vintlabs-devkit-v1.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
vintlabs-devkit-v1.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
vintlabs-devkit-v1.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
vintlabs-devkit-v1.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
vintlabs-devkit-v1.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
vintlabs-devkit-v1.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
vintlabs-devkit-v1.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
vintlabs-devkit-v1.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
vintlabs-devkit-v1.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
vintlabs-devkit-v1.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
vintlabs-devkit-v1.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
vintlabs-devkit-v1.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
vintlabs-devkit-v1.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
vintlabs-devkit-v1.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
vintlabs-devkit-v1.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
vintlabs-devkit-v1.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
vintlabs-devkit-v1.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
vintlabs-devkit-v1.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
vintlabs-devkit-v1.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
|
|
vintlabs-devkit-v1.menu.FlashSize.4M=4MB (32Mb)
|
|
vintlabs-devkit-v1.menu.FlashSize.4M.build.flash_size=4MB
|
|
vintlabs-devkit-v1.menu.FlashSize.8M=8MB (64Mb)
|
|
vintlabs-devkit-v1.menu.FlashSize.8M.build.flash_size=8MB
|
|
vintlabs-devkit-v1.menu.FlashSize.8M.build.partitions=default_8MB
|
|
vintlabs-devkit-v1.menu.FlashSize.2M=2MB (16Mb)
|
|
vintlabs-devkit-v1.menu.FlashSize.2M.build.flash_size=2MB
|
|
vintlabs-devkit-v1.menu.FlashSize.2M.build.partitions=minimal
|
|
vintlabs-devkit-v1.menu.FlashSize.16M=16MB (128Mb)
|
|
vintlabs-devkit-v1.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
vintlabs-devkit-v1.menu.DebugLevel.none=None
|
|
vintlabs-devkit-v1.menu.DebugLevel.none.build.code_debug=0
|
|
vintlabs-devkit-v1.menu.DebugLevel.error=Error
|
|
vintlabs-devkit-v1.menu.DebugLevel.error.build.code_debug=1
|
|
vintlabs-devkit-v1.menu.DebugLevel.warn=Warn
|
|
vintlabs-devkit-v1.menu.DebugLevel.warn.build.code_debug=2
|
|
vintlabs-devkit-v1.menu.DebugLevel.info=Info
|
|
vintlabs-devkit-v1.menu.DebugLevel.info.build.code_debug=3
|
|
vintlabs-devkit-v1.menu.DebugLevel.debug=Debug
|
|
vintlabs-devkit-v1.menu.DebugLevel.debug.build.code_debug=4
|
|
|
|
vintlabs-devkit-v1.menu.EraseFlash.none=Disabled
|
|
vintlabs-devkit-v1.menu.EraseFlash.none.upload.erase_cmd=
|
|
vintlabs-devkit-v1.menu.EraseFlash.all=Enabled
|
|
vintlabs-devkit-v1.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
honeylemon.name=HONEYLemon
|
|
|
|
honeylemon.bootloader.tool=esptool_py
|
|
honeylemon.bootloader.tool.default=esptool_py
|
|
|
|
honeylemon.upload.tool=esptool_py
|
|
honeylemon.upload.tool.default=esptool_py
|
|
honeylemon.upload.tool.network=esp_ota
|
|
|
|
honeylemon.upload.maximum_size=1310720
|
|
honeylemon.upload.maximum_data_size=327680
|
|
honeylemon.upload.flags=
|
|
honeylemon.upload.extra_flags=
|
|
|
|
honeylemon.serial.disableDTR=true
|
|
honeylemon.serial.disableRTS=true
|
|
|
|
honeylemon.build.tarch=xtensa
|
|
honeylemon.build.bootloader_addr=0x1000
|
|
honeylemon.build.target=esp32
|
|
honeylemon.build.mcu=esp32
|
|
honeylemon.build.core=esp32
|
|
honeylemon.build.variant=honeylemon
|
|
honeylemon.build.board=HONEYLEMON
|
|
|
|
honeylemon.build.f_cpu=240000000L
|
|
honeylemon.build.flash_mode=dio
|
|
honeylemon.build.flash_size=4MB
|
|
honeylemon.build.boot=dio
|
|
honeylemon.build.partitions=default
|
|
honeylemon.build.defines=
|
|
|
|
honeylemon.menu.FlashFreq.80=80MHz
|
|
honeylemon.menu.FlashFreq.80.build.flash_freq=80m
|
|
honeylemon.menu.FlashFreq.40=40MHz
|
|
honeylemon.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
honeylemon.menu.UploadSpeed.921600=921600
|
|
honeylemon.menu.UploadSpeed.921600.upload.speed=921600
|
|
honeylemon.menu.UploadSpeed.115200=115200
|
|
honeylemon.menu.UploadSpeed.115200.upload.speed=115200
|
|
honeylemon.menu.UploadSpeed.256000.windows=256000
|
|
honeylemon.menu.UploadSpeed.256000.upload.speed=256000
|
|
honeylemon.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
honeylemon.menu.UploadSpeed.230400=230400
|
|
honeylemon.menu.UploadSpeed.230400.upload.speed=230400
|
|
honeylemon.menu.UploadSpeed.460800.linux=460800
|
|
honeylemon.menu.UploadSpeed.460800.macosx=460800
|
|
honeylemon.menu.UploadSpeed.460800.upload.speed=460800
|
|
honeylemon.menu.UploadSpeed.512000.windows=512000
|
|
honeylemon.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
honeylemon.menu.DebugLevel.none=None
|
|
honeylemon.menu.DebugLevel.none.build.code_debug=0
|
|
honeylemon.menu.DebugLevel.error=Error
|
|
honeylemon.menu.DebugLevel.error.build.code_debug=1
|
|
honeylemon.menu.DebugLevel.warn=Warn
|
|
honeylemon.menu.DebugLevel.warn.build.code_debug=2
|
|
honeylemon.menu.DebugLevel.info=Info
|
|
honeylemon.menu.DebugLevel.info.build.code_debug=3
|
|
honeylemon.menu.DebugLevel.debug=Debug
|
|
honeylemon.menu.DebugLevel.debug.build.code_debug=4
|
|
honeylemon.menu.DebugLevel.verbose=Verbose
|
|
honeylemon.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
honeylemon.menu.EraseFlash.none=Disabled
|
|
honeylemon.menu.EraseFlash.none.upload.erase_cmd=
|
|
honeylemon.menu.EraseFlash.all=Enabled
|
|
honeylemon.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
mgbot-iotik32a.name=MGBOT IOTIK 32A
|
|
|
|
mgbot-iotik32a.bootloader.tool=esptool_py
|
|
mgbot-iotik32a.bootloader.tool.default=esptool_py
|
|
|
|
mgbot-iotik32a.upload.tool=esptool_py
|
|
mgbot-iotik32a.upload.tool.default=esptool_py
|
|
mgbot-iotik32a.upload.tool.network=esp_ota
|
|
|
|
mgbot-iotik32a.upload.maximum_size=1310720
|
|
mgbot-iotik32a.upload.maximum_data_size=327680
|
|
mgbot-iotik32a.upload.flags=
|
|
mgbot-iotik32a.upload.extra_flags=
|
|
|
|
mgbot-iotik32a.serial.disableDTR=true
|
|
mgbot-iotik32a.serial.disableRTS=true
|
|
|
|
mgbot-iotik32a.build.tarch=xtensa
|
|
mgbot-iotik32a.build.bootloader_addr=0x1000
|
|
mgbot-iotik32a.build.target=esp32
|
|
mgbot-iotik32a.build.mcu=esp32
|
|
mgbot-iotik32a.build.core=esp32
|
|
mgbot-iotik32a.build.variant=mgbot-iotik32a
|
|
mgbot-iotik32a.build.board=MGBOT_IOTIK32A
|
|
|
|
mgbot-iotik32a.build.f_cpu=240000000L
|
|
mgbot-iotik32a.build.flash_size=4MB
|
|
mgbot-iotik32a.build.flash_freq=40m
|
|
mgbot-iotik32a.build.flash_mode=dio
|
|
mgbot-iotik32a.build.boot=dio
|
|
mgbot-iotik32a.build.partitions=default
|
|
mgbot-iotik32a.build.defines=
|
|
|
|
mgbot-iotik32a.menu.PSRAM.disabled=Disabled
|
|
mgbot-iotik32a.menu.PSRAM.disabled.build.defines=
|
|
mgbot-iotik32a.menu.PSRAM.disabled.build.extra_libs=
|
|
mgbot-iotik32a.menu.PSRAM.enabled=Enabled
|
|
mgbot-iotik32a.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
mgbot-iotik32a.menu.PSRAM.enabled.build.extra_libs=
|
|
|
|
mgbot-iotik32a.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
mgbot-iotik32a.menu.PartitionScheme.default.build.partitions=default
|
|
mgbot-iotik32a.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
mgbot-iotik32a.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
mgbot-iotik32a.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
mgbot-iotik32a.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
mgbot-iotik32a.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
mgbot-iotik32a.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
mgbot-iotik32a.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
mgbot-iotik32a.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
mgbot-iotik32a.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
mgbot-iotik32a.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
mgbot-iotik32a.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
mgbot-iotik32a.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
mgbot-iotik32a.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
mgbot-iotik32a.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
mgbot-iotik32a.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
mgbot-iotik32a.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
mgbot-iotik32a.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
mgbot-iotik32a.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
mgbot-iotik32a.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
mgbot-iotik32a.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
mgbot-iotik32a.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
mgbot-iotik32a.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
mgbot-iotik32a.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
mgbot-iotik32a.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
mgbot-iotik32a.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
mgbot-iotik32a.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
mgbot-iotik32a.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
mgbot-iotik32a.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
mgbot-iotik32a.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
mgbot-iotik32a.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
mgbot-iotik32a.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
|
|
mgbot-iotik32a.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
mgbot-iotik32a.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
mgbot-iotik32a.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
mgbot-iotik32a.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
mgbot-iotik32a.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
mgbot-iotik32a.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
mgbot-iotik32a.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
mgbot-iotik32a.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
mgbot-iotik32a.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
mgbot-iotik32a.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
mgbot-iotik32a.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
mgbot-iotik32a.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
mgbot-iotik32a.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
mgbot-iotik32a.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
mgbot-iotik32a.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
mgbot-iotik32a.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
mgbot-iotik32a.menu.FlashMode.qio=QIO
|
|
mgbot-iotik32a.menu.FlashMode.qio.build.flash_mode=dio
|
|
mgbot-iotik32a.menu.FlashMode.qio.build.boot=qio
|
|
mgbot-iotik32a.menu.FlashMode.dio=DIO
|
|
mgbot-iotik32a.menu.FlashMode.dio.build.flash_mode=dio
|
|
mgbot-iotik32a.menu.FlashMode.dio.build.boot=dio
|
|
|
|
mgbot-iotik32a.menu.FlashFreq.80=80MHz
|
|
mgbot-iotik32a.menu.FlashFreq.80.build.flash_freq=80m
|
|
mgbot-iotik32a.menu.FlashFreq.40=40MHz
|
|
mgbot-iotik32a.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
mgbot-iotik32a.menu.FlashSize.4M=4MB (32Mb)
|
|
mgbot-iotik32a.menu.FlashSize.4M.build.flash_size=4MB
|
|
mgbot-iotik32a.menu.FlashSize.8M=8MB (64Mb)
|
|
mgbot-iotik32a.menu.FlashSize.8M.build.flash_size=8MB
|
|
mgbot-iotik32a.menu.FlashSize.8M.build.partitions=default_8MB
|
|
mgbot-iotik32a.menu.FlashSize.2M=2MB (16Mb)
|
|
mgbot-iotik32a.menu.FlashSize.2M.build.flash_size=2MB
|
|
mgbot-iotik32a.menu.FlashSize.2M.build.partitions=minimal
|
|
mgbot-iotik32a.menu.FlashSize.16M=16MB (128Mb)
|
|
mgbot-iotik32a.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
mgbot-iotik32a.menu.UploadSpeed.921600=921600
|
|
mgbot-iotik32a.menu.UploadSpeed.921600.upload.speed=921600
|
|
mgbot-iotik32a.menu.UploadSpeed.115200=115200
|
|
mgbot-iotik32a.menu.UploadSpeed.115200.upload.speed=115200
|
|
mgbot-iotik32a.menu.UploadSpeed.256000.windows=256000
|
|
mgbot-iotik32a.menu.UploadSpeed.256000.upload.speed=256000
|
|
mgbot-iotik32a.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
mgbot-iotik32a.menu.UploadSpeed.230400=230400
|
|
mgbot-iotik32a.menu.UploadSpeed.230400.upload.speed=230400
|
|
mgbot-iotik32a.menu.UploadSpeed.460800.linux=460800
|
|
mgbot-iotik32a.menu.UploadSpeed.460800.macosx=460800
|
|
mgbot-iotik32a.menu.UploadSpeed.460800.upload.speed=460800
|
|
mgbot-iotik32a.menu.UploadSpeed.512000.windows=512000
|
|
mgbot-iotik32a.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
mgbot-iotik32a.menu.DebugLevel.none=None
|
|
mgbot-iotik32a.menu.DebugLevel.none.build.code_debug=0
|
|
mgbot-iotik32a.menu.DebugLevel.error=Error
|
|
mgbot-iotik32a.menu.DebugLevel.error.build.code_debug=1
|
|
mgbot-iotik32a.menu.DebugLevel.warn=Warn
|
|
mgbot-iotik32a.menu.DebugLevel.warn.build.code_debug=2
|
|
mgbot-iotik32a.menu.DebugLevel.info=Info
|
|
mgbot-iotik32a.menu.DebugLevel.info.build.code_debug=3
|
|
mgbot-iotik32a.menu.DebugLevel.debug=Debug
|
|
mgbot-iotik32a.menu.DebugLevel.debug.build.code_debug=4
|
|
mgbot-iotik32a.menu.DebugLevel.verbose=Verbose
|
|
mgbot-iotik32a.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
mgbot-iotik32a.menu.EraseFlash.none=Disabled
|
|
mgbot-iotik32a.menu.EraseFlash.none.upload.erase_cmd=
|
|
mgbot-iotik32a.menu.EraseFlash.all=Enabled
|
|
mgbot-iotik32a.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
mgbot-iotik32b.name=MGBOT IOTIK 32B
|
|
|
|
mgbot-iotik32b.bootloader.tool=esptool_py
|
|
mgbot-iotik32b.bootloader.tool.default=esptool_py
|
|
|
|
mgbot-iotik32b.upload.tool=esptool_py
|
|
mgbot-iotik32b.upload.tool.default=esptool_py
|
|
mgbot-iotik32b.upload.tool.network=esp_ota
|
|
|
|
mgbot-iotik32b.upload.maximum_size=1310720
|
|
mgbot-iotik32b.upload.maximum_data_size=327680
|
|
mgbot-iotik32b.upload.flags=
|
|
mgbot-iotik32b.upload.extra_flags=
|
|
|
|
mgbot-iotik32b.serial.disableDTR=true
|
|
mgbot-iotik32b.serial.disableRTS=true
|
|
|
|
mgbot-iotik32b.build.tarch=xtensa
|
|
mgbot-iotik32b.build.bootloader_addr=0x1000
|
|
mgbot-iotik32b.build.target=esp32
|
|
mgbot-iotik32b.build.mcu=esp32
|
|
mgbot-iotik32b.build.core=esp32
|
|
mgbot-iotik32b.build.variant=mgbot-iotik32b
|
|
mgbot-iotik32b.build.board=MGBOT_IOTIK32B
|
|
|
|
mgbot-iotik32b.build.f_cpu=240000000L
|
|
mgbot-iotik32b.build.flash_size=4MB
|
|
mgbot-iotik32b.build.flash_freq=40m
|
|
mgbot-iotik32b.build.flash_mode=dio
|
|
mgbot-iotik32b.build.boot=dio
|
|
mgbot-iotik32b.build.partitions=default
|
|
mgbot-iotik32b.build.defines=
|
|
|
|
mgbot-iotik32b.menu.PSRAM.disabled=Disabled
|
|
mgbot-iotik32b.menu.PSRAM.disabled.build.defines=
|
|
mgbot-iotik32b.menu.PSRAM.disabled.build.extra_libs=
|
|
mgbot-iotik32b.menu.PSRAM.enabled=Enabled
|
|
mgbot-iotik32b.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
mgbot-iotik32b.menu.PSRAM.enabled.build.extra_libs=
|
|
|
|
mgbot-iotik32b.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
mgbot-iotik32b.menu.PartitionScheme.default.build.partitions=default
|
|
mgbot-iotik32b.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
mgbot-iotik32b.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
mgbot-iotik32b.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
mgbot-iotik32b.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
mgbot-iotik32b.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
mgbot-iotik32b.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
mgbot-iotik32b.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
mgbot-iotik32b.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
mgbot-iotik32b.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
mgbot-iotik32b.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
mgbot-iotik32b.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
mgbot-iotik32b.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
mgbot-iotik32b.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
mgbot-iotik32b.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
mgbot-iotik32b.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
mgbot-iotik32b.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
mgbot-iotik32b.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
mgbot-iotik32b.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
mgbot-iotik32b.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
mgbot-iotik32b.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
mgbot-iotik32b.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
mgbot-iotik32b.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
mgbot-iotik32b.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
mgbot-iotik32b.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
mgbot-iotik32b.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
mgbot-iotik32b.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
mgbot-iotik32b.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
mgbot-iotik32b.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
mgbot-iotik32b.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
mgbot-iotik32b.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
mgbot-iotik32b.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
|
|
mgbot-iotik32b.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
mgbot-iotik32b.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
mgbot-iotik32b.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
mgbot-iotik32b.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
mgbot-iotik32b.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
mgbot-iotik32b.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
mgbot-iotik32b.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
mgbot-iotik32b.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
mgbot-iotik32b.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
mgbot-iotik32b.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
mgbot-iotik32b.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
mgbot-iotik32b.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
mgbot-iotik32b.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
mgbot-iotik32b.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
mgbot-iotik32b.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
mgbot-iotik32b.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
mgbot-iotik32b.menu.FlashMode.qio=QIO
|
|
mgbot-iotik32b.menu.FlashMode.qio.build.flash_mode=dio
|
|
mgbot-iotik32b.menu.FlashMode.qio.build.boot=qio
|
|
mgbot-iotik32b.menu.FlashMode.dio=DIO
|
|
mgbot-iotik32b.menu.FlashMode.dio.build.flash_mode=dio
|
|
mgbot-iotik32b.menu.FlashMode.dio.build.boot=dio
|
|
|
|
mgbot-iotik32b.menu.FlashFreq.80=80MHz
|
|
mgbot-iotik32b.menu.FlashFreq.80.build.flash_freq=80m
|
|
mgbot-iotik32b.menu.FlashFreq.40=40MHz
|
|
mgbot-iotik32b.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
mgbot-iotik32b.menu.FlashSize.4M=4MB (32Mb)
|
|
mgbot-iotik32b.menu.FlashSize.4M.build.flash_size=4MB
|
|
mgbot-iotik32b.menu.FlashSize.8M=8MB (64Mb)
|
|
mgbot-iotik32b.menu.FlashSize.8M.build.flash_size=8MB
|
|
mgbot-iotik32b.menu.FlashSize.8M.build.partitions=default_8MB
|
|
mgbot-iotik32b.menu.FlashSize.2M=2MB (16Mb)
|
|
mgbot-iotik32b.menu.FlashSize.2M.build.flash_size=2MB
|
|
mgbot-iotik32b.menu.FlashSize.2M.build.partitions=minimal
|
|
mgbot-iotik32b.menu.FlashSize.16M=16MB (128Mb)
|
|
mgbot-iotik32b.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
mgbot-iotik32b.menu.UploadSpeed.921600=921600
|
|
mgbot-iotik32b.menu.UploadSpeed.921600.upload.speed=921600
|
|
mgbot-iotik32b.menu.UploadSpeed.115200=115200
|
|
mgbot-iotik32b.menu.UploadSpeed.115200.upload.speed=115200
|
|
mgbot-iotik32b.menu.UploadSpeed.256000.windows=256000
|
|
mgbot-iotik32b.menu.UploadSpeed.256000.upload.speed=256000
|
|
mgbot-iotik32b.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
mgbot-iotik32b.menu.UploadSpeed.230400=230400
|
|
mgbot-iotik32b.menu.UploadSpeed.230400.upload.speed=230400
|
|
mgbot-iotik32b.menu.UploadSpeed.460800.linux=460800
|
|
mgbot-iotik32b.menu.UploadSpeed.460800.macosx=460800
|
|
mgbot-iotik32b.menu.UploadSpeed.460800.upload.speed=460800
|
|
mgbot-iotik32b.menu.UploadSpeed.512000.windows=512000
|
|
mgbot-iotik32b.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
mgbot-iotik32b.menu.DebugLevel.none=None
|
|
mgbot-iotik32b.menu.DebugLevel.none.build.code_debug=0
|
|
mgbot-iotik32b.menu.DebugLevel.error=Error
|
|
mgbot-iotik32b.menu.DebugLevel.error.build.code_debug=1
|
|
mgbot-iotik32b.menu.DebugLevel.warn=Warn
|
|
mgbot-iotik32b.menu.DebugLevel.warn.build.code_debug=2
|
|
mgbot-iotik32b.menu.DebugLevel.info=Info
|
|
mgbot-iotik32b.menu.DebugLevel.info.build.code_debug=3
|
|
mgbot-iotik32b.menu.DebugLevel.debug=Debug
|
|
mgbot-iotik32b.menu.DebugLevel.debug.build.code_debug=4
|
|
mgbot-iotik32b.menu.DebugLevel.verbose=Verbose
|
|
mgbot-iotik32b.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
mgbot-iotik32b.menu.EraseFlash.none=Disabled
|
|
mgbot-iotik32b.menu.EraseFlash.none.upload.erase_cmd=
|
|
mgbot-iotik32b.menu.EraseFlash.all=Enabled
|
|
mgbot-iotik32b.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
piranha_esp-32.name=Piranha ESP-32
|
|
|
|
piranha_esp-32.bootloader.tool=esptool_py
|
|
piranha_esp-32.bootloader.tool.default=esptool_py
|
|
|
|
piranha_esp-32.upload.tool=esptool_py
|
|
piranha_esp-32.upload.tool.default=esptool_py
|
|
piranha_esp-32.upload.tool.network=esp_ota
|
|
|
|
piranha_esp-32.upload.maximum_size=1310720
|
|
piranha_esp-32.upload.maximum_data_size=327680
|
|
piranha_esp-32.upload.flags=
|
|
piranha_esp-32.upload.extra_flags=
|
|
|
|
piranha_esp-32.serial.disableDTR=true
|
|
piranha_esp-32.serial.disableRTS=true
|
|
|
|
piranha_esp-32.build.tarch=xtensa
|
|
piranha_esp-32.build.bootloader_addr=0x1000
|
|
piranha_esp-32.build.target=esp32
|
|
piranha_esp-32.build.mcu=esp32
|
|
piranha_esp-32.build.core=esp32
|
|
piranha_esp-32.build.variant=piranha_esp-32
|
|
piranha_esp-32.build.board=Piranha
|
|
|
|
piranha_esp-32.build.f_cpu=240000000L
|
|
piranha_esp-32.build.flash_mode=dio
|
|
piranha_esp-32.build.flash_size=4MB
|
|
piranha_esp-32.build.boot=dio
|
|
piranha_esp-32.build.partitions=default
|
|
piranha_esp-32.build.defines=
|
|
|
|
piranha_esp-32.menu.PartitionScheme.default=Default
|
|
piranha_esp-32.menu.PartitionScheme.default.build.partitions=default
|
|
piranha_esp-32.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
piranha_esp-32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
piranha_esp-32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
piranha_esp-32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
piranha_esp-32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
piranha_esp-32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
piranha_esp-32.menu.FlashFreq.80=80MHz
|
|
piranha_esp-32.menu.FlashFreq.80.build.flash_freq=80m
|
|
piranha_esp-32.menu.FlashFreq.40=40MHz
|
|
piranha_esp-32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
piranha_esp-32.menu.UploadSpeed.921600=921600
|
|
piranha_esp-32.menu.UploadSpeed.921600.upload.speed=921600
|
|
piranha_esp-32.menu.UploadSpeed.115200=115200
|
|
piranha_esp-32.menu.UploadSpeed.115200.upload.speed=115200
|
|
piranha_esp-32.menu.UploadSpeed.256000.windows=256000
|
|
piranha_esp-32.menu.UploadSpeed.256000.upload.speed=256000
|
|
piranha_esp-32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
piranha_esp-32.menu.UploadSpeed.230400=230400
|
|
piranha_esp-32.menu.UploadSpeed.230400.upload.speed=230400
|
|
piranha_esp-32.menu.UploadSpeed.460800.linux=460800
|
|
piranha_esp-32.menu.UploadSpeed.460800.macosx=460800
|
|
piranha_esp-32.menu.UploadSpeed.460800.upload.speed=460800
|
|
piranha_esp-32.menu.UploadSpeed.512000.windows=512000
|
|
piranha_esp-32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
piranha_esp-32.menu.DebugLevel.none=None
|
|
piranha_esp-32.menu.DebugLevel.none.build.code_debug=0
|
|
piranha_esp-32.menu.DebugLevel.error=Error
|
|
piranha_esp-32.menu.DebugLevel.error.build.code_debug=1
|
|
piranha_esp-32.menu.DebugLevel.warn=Warn
|
|
piranha_esp-32.menu.DebugLevel.warn.build.code_debug=2
|
|
piranha_esp-32.menu.DebugLevel.info=Info
|
|
piranha_esp-32.menu.DebugLevel.info.build.code_debug=3
|
|
piranha_esp-32.menu.DebugLevel.debug=Debug
|
|
piranha_esp-32.menu.DebugLevel.debug.build.code_debug=4
|
|
piranha_esp-32.menu.DebugLevel.verbose=Verbose
|
|
piranha_esp-32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
piranha_esp-32.menu.EraseFlash.none=Disabled
|
|
piranha_esp-32.menu.EraseFlash.none.upload.erase_cmd=
|
|
piranha_esp-32.menu.EraseFlash.all=Enabled
|
|
piranha_esp-32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
metro_esp-32.name=Metro ESP-32
|
|
|
|
metro_esp-32.bootloader.tool=esptool_py
|
|
metro_esp-32.bootloader.tool.default=esptool_py
|
|
|
|
metro_esp-32.upload.tool=esptool_py
|
|
metro_esp-32.upload.tool.default=esptool_py
|
|
metro_esp-32.upload.tool.network=esp_ota
|
|
|
|
metro_esp-32.upload.maximum_size=1310720
|
|
metro_esp-32.upload.maximum_data_size=327680
|
|
metro_esp-32.upload.flags=
|
|
metro_esp-32.upload.extra_flags=
|
|
|
|
metro_esp-32.serial.disableDTR=true
|
|
metro_esp-32.serial.disableRTS=true
|
|
|
|
metro_esp-32.build.tarch=xtensa
|
|
metro_esp-32.build.bootloader_addr=0x1000
|
|
metro_esp-32.build.target=esp32
|
|
metro_esp-32.build.mcu=esp32
|
|
metro_esp-32.build.core=esp32
|
|
metro_esp-32.build.variant=metro_esp-32
|
|
metro_esp-32.build.board=Metro
|
|
|
|
metro_esp-32.build.f_cpu=240000000L
|
|
metro_esp-32.build.flash_mode=dio
|
|
metro_esp-32.build.flash_size=4MB
|
|
metro_esp-32.build.boot=dio
|
|
metro_esp-32.build.partitions=default
|
|
metro_esp-32.build.defines=
|
|
|
|
metro_esp-32.menu.PartitionScheme.default=Default
|
|
metro_esp-32.menu.PartitionScheme.default.build.partitions=default
|
|
metro_esp-32.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
metro_esp-32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
metro_esp-32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
metro_esp-32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
metro_esp-32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
metro_esp-32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
metro_esp-32.menu.FlashFreq.80=80MHz
|
|
metro_esp-32.menu.FlashFreq.80.build.flash_freq=80m
|
|
metro_esp-32.menu.FlashFreq.40=40MHz
|
|
metro_esp-32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
metro_esp-32.menu.UploadSpeed.921600=921600
|
|
metro_esp-32.menu.UploadSpeed.921600.upload.speed=921600
|
|
metro_esp-32.menu.UploadSpeed.115200=115200
|
|
metro_esp-32.menu.UploadSpeed.115200.upload.speed=115200
|
|
metro_esp-32.menu.UploadSpeed.256000.windows=256000
|
|
metro_esp-32.menu.UploadSpeed.256000.upload.speed=256000
|
|
metro_esp-32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
metro_esp-32.menu.UploadSpeed.230400=230400
|
|
metro_esp-32.menu.UploadSpeed.230400.upload.speed=230400
|
|
metro_esp-32.menu.UploadSpeed.460800.linux=460800
|
|
metro_esp-32.menu.UploadSpeed.460800.macosx=460800
|
|
metro_esp-32.menu.UploadSpeed.460800.upload.speed=460800
|
|
metro_esp-32.menu.UploadSpeed.512000.windows=512000
|
|
metro_esp-32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
metro_esp-32.menu.DebugLevel.none=None
|
|
metro_esp-32.menu.DebugLevel.none.build.code_debug=0
|
|
metro_esp-32.menu.DebugLevel.error=Error
|
|
metro_esp-32.menu.DebugLevel.error.build.code_debug=1
|
|
metro_esp-32.menu.DebugLevel.warn=Warn
|
|
metro_esp-32.menu.DebugLevel.warn.build.code_debug=2
|
|
metro_esp-32.menu.DebugLevel.info=Info
|
|
metro_esp-32.menu.DebugLevel.info.build.code_debug=3
|
|
metro_esp-32.menu.DebugLevel.debug=Debug
|
|
metro_esp-32.menu.DebugLevel.debug.build.code_debug=4
|
|
metro_esp-32.menu.DebugLevel.verbose=Verbose
|
|
metro_esp-32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
metro_esp-32.menu.EraseFlash.none=Disabled
|
|
metro_esp-32.menu.EraseFlash.none.upload.erase_cmd=
|
|
metro_esp-32.menu.EraseFlash.all=Enabled
|
|
metro_esp-32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
sensesiot_weizen.name=Senses's WEIZEN
|
|
|
|
sensesiot_weizen.bootloader.tool=esptool_py
|
|
sensesiot_weizen.bootloader.tool.default=esptool_py
|
|
|
|
sensesiot_weizen.upload.tool=esptool_py
|
|
sensesiot_weizen.upload.tool.default=esptool_py
|
|
sensesiot_weizen.upload.tool.network=esp_ota
|
|
|
|
sensesiot_weizen.upload.maximum_size=1310720
|
|
sensesiot_weizen.upload.maximum_data_size=327680
|
|
sensesiot_weizen.upload.flags=
|
|
sensesiot_weizen.upload.extra_flags=
|
|
|
|
sensesiot_weizen.serial.disableDTR=true
|
|
sensesiot_weizen.serial.disableRTS=true
|
|
|
|
sensesiot_weizen.build.tarch=xtensa
|
|
sensesiot_weizen.build.bootloader_addr=0x1000
|
|
sensesiot_weizen.build.target=esp32
|
|
sensesiot_weizen.build.mcu=esp32
|
|
sensesiot_weizen.build.core=esp32
|
|
sensesiot_weizen.build.variant=esp32
|
|
sensesiot_weizen.build.board=sensesiot_weizen
|
|
|
|
sensesiot_weizen.build.f_cpu=240000000L
|
|
sensesiot_weizen.build.flash_mode=dio
|
|
sensesiot_weizen.build.flash_size=4MB
|
|
sensesiot_weizen.build.boot=dio
|
|
sensesiot_weizen.build.partitions=default
|
|
sensesiot_weizen.build.defines=
|
|
|
|
sensesiot_weizen.menu.FlashFreq.80=80MHz
|
|
sensesiot_weizen.menu.FlashFreq.80.build.flash_freq=80m
|
|
sensesiot_weizen.menu.FlashFreq.40=40MHz
|
|
sensesiot_weizen.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
sensesiot_weizen.menu.UploadSpeed.921600=921600
|
|
sensesiot_weizen.menu.UploadSpeed.921600.upload.speed=921600
|
|
sensesiot_weizen.menu.UploadSpeed.115200=115200
|
|
sensesiot_weizen.menu.UploadSpeed.115200.upload.speed=115200
|
|
sensesiot_weizen.menu.UploadSpeed.256000.windows=256000
|
|
sensesiot_weizen.menu.UploadSpeed.256000.upload.speed=256000
|
|
sensesiot_weizen.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
sensesiot_weizen.menu.UploadSpeed.230400=230400
|
|
sensesiot_weizen.menu.UploadSpeed.230400.upload.speed=230400
|
|
sensesiot_weizen.menu.UploadSpeed.460800.linux=460800
|
|
sensesiot_weizen.menu.UploadSpeed.460800.macosx=460800
|
|
sensesiot_weizen.menu.UploadSpeed.460800.upload.speed=460800
|
|
sensesiot_weizen.menu.UploadSpeed.512000.windows=512000
|
|
sensesiot_weizen.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
sensesiot_weizen.menu.DebugLevel.none=None
|
|
sensesiot_weizen.menu.DebugLevel.none.build.code_debug=0
|
|
sensesiot_weizen.menu.DebugLevel.error=Error
|
|
sensesiot_weizen.menu.DebugLevel.error.build.code_debug=1
|
|
sensesiot_weizen.menu.DebugLevel.warn=Warn
|
|
sensesiot_weizen.menu.DebugLevel.warn.build.code_debug=2
|
|
sensesiot_weizen.menu.DebugLevel.info=Info
|
|
sensesiot_weizen.menu.DebugLevel.info.build.code_debug=3
|
|
sensesiot_weizen.menu.DebugLevel.debug=Debug
|
|
sensesiot_weizen.menu.DebugLevel.debug.build.code_debug=4
|
|
sensesiot_weizen.menu.DebugLevel.verbose=Verbose
|
|
sensesiot_weizen.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
sensesiot_weizen.menu.EraseFlash.none=Disabled
|
|
sensesiot_weizen.menu.EraseFlash.none.upload.erase_cmd=
|
|
sensesiot_weizen.menu.EraseFlash.all=Enabled
|
|
sensesiot_weizen.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
kits-edu.name=KITS ESP32 EDU
|
|
|
|
kits-edu.bootloader.tool=esptool_py
|
|
kits-edu.bootloader.tool.default=esptool_py
|
|
|
|
kits-edu.upload.tool=esptool_py
|
|
kits-edu.upload.tool.default=esptool_py
|
|
kits-edu.upload.tool.network=esp_ota
|
|
|
|
kits-edu.upload.maximum_size=1310720
|
|
kits-edu.upload.maximum_data_size=327680
|
|
kits-edu.upload.wait_for_upload_port=true
|
|
kits-edu.upload.flags=
|
|
kits-edu.upload.extra_flags=
|
|
|
|
kits-edu.serial.disableDTR=true
|
|
kits-edu.serial.disableRTS=true
|
|
|
|
kits-edu.build.tarch=xtensa
|
|
kits-edu.build.bootloader_addr=0x1000
|
|
kits-edu.build.target=esp32
|
|
kits-edu.build.mcu=esp32
|
|
kits-edu.build.core=esp32
|
|
kits-edu.build.variant=pico32
|
|
kits-edu.build.board=ESP32_PICO
|
|
|
|
kits-edu.build.f_cpu=240000000L
|
|
kits-edu.build.flash_size=4MB
|
|
kits-edu.build.flash_freq=80m
|
|
kits-edu.build.flash_mode=dio
|
|
kits-edu.build.boot=dio
|
|
kits-edu.build.partitions=default
|
|
kits-edu.build.defines=
|
|
|
|
kits-edu.menu.PartitionScheme.default=Default
|
|
kits-edu.menu.PartitionScheme.default.build.partitions=default
|
|
kits-edu.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
kits-edu.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
kits-edu.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
kits-edu.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
kits-edu.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
kits-edu.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
kits-edu.menu.UploadSpeed.921600=921600
|
|
kits-edu.menu.UploadSpeed.921600.upload.speed=921600
|
|
kits-edu.menu.UploadSpeed.115200=115200
|
|
kits-edu.menu.UploadSpeed.115200.upload.speed=115200
|
|
kits-edu.menu.UploadSpeed.256000.windows=256000
|
|
kits-edu.menu.UploadSpeed.256000.upload.speed=256000
|
|
kits-edu.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
kits-edu.menu.UploadSpeed.230400=230400
|
|
kits-edu.menu.UploadSpeed.230400.upload.speed=230400
|
|
kits-edu.menu.UploadSpeed.460800.linux=460800
|
|
kits-edu.menu.UploadSpeed.460800.macosx=460800
|
|
kits-edu.menu.UploadSpeed.460800.upload.speed=460800
|
|
kits-edu.menu.UploadSpeed.512000.windows=512000
|
|
kits-edu.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
kits-edu.menu.DebugLevel.none=None
|
|
kits-edu.menu.DebugLevel.none.build.code_debug=0
|
|
kits-edu.menu.DebugLevel.error=Error
|
|
kits-edu.menu.DebugLevel.error.build.code_debug=1
|
|
kits-edu.menu.DebugLevel.warn=Warn
|
|
kits-edu.menu.DebugLevel.warn.build.code_debug=2
|
|
kits-edu.menu.DebugLevel.info=Info
|
|
kits-edu.menu.DebugLevel.info.build.code_debug=3
|
|
kits-edu.menu.DebugLevel.debug=Debug
|
|
kits-edu.menu.DebugLevel.debug.build.code_debug=4
|
|
kits-edu.menu.DebugLevel.verbose=Verbose
|
|
kits-edu.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
kits-edu.menu.EraseFlash.none=Disabled
|
|
kits-edu.menu.EraseFlash.none.upload.erase_cmd=
|
|
kits-edu.menu.EraseFlash.all=Enabled
|
|
kits-edu.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
mPython.name=Labplus mPython
|
|
mPython.bootloader.tool=esptool_py
|
|
mPython.bootloader.tool.default=esptool_py
|
|
|
|
mPython.upload.tool=esptool_py
|
|
mPython.upload.tool.default=esptool_py
|
|
mPython.upload.tool.network=esp_ota
|
|
|
|
mPython.upload.maximum_size=1310720
|
|
mPython.upload.maximum_data_size=327680
|
|
mPython.upload.flags=
|
|
mPython.upload.extra_flags=
|
|
|
|
mPython.serial.disableDTR=true
|
|
mPython.serial.disableRTS=true
|
|
|
|
mPython.build.tarch=xtensa
|
|
mPython.build.bootloader_addr=0x1000
|
|
mPython.build.target=esp32
|
|
mPython.build.mcu=esp32
|
|
mPython.build.core=esp32
|
|
mPython.build.variant=mpython
|
|
mPython.build.board=ESP32_DEV
|
|
|
|
mPython.build.f_cpu=240000000L
|
|
mPython.build.flash_size=8MB
|
|
mPython.build.flash_freq=40m
|
|
mPython.build.flash_mode=dio
|
|
mPython.build.boot=dio
|
|
mPython.build.partitions=huge_app
|
|
mPython.build.defines=
|
|
|
|
mPython.menu.PSRAM.disabled=Disabled
|
|
mPython.menu.PSRAM.disabled.build.defines=
|
|
mPython.menu.PSRAM.disabled.build.extra_libs=
|
|
mPython.menu.PSRAM.enabled=Enabled
|
|
mPython.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
mPython.menu.PSRAM.enabled.build.extra_libs=
|
|
|
|
mPython.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
mPython.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
mPython.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
mPython.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
mPython.menu.PartitionScheme.default.build.partitions=default
|
|
mPython.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
mPython.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
mPython.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
mPython.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
mPython.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
mPython.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
mPython.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
mPython.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
mPython.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
mPython.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
mPython.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
mPython.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
mPython.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
mPython.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
mPython.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
mPython.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
mPython.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
mPython.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
mPython.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
mPython.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
mPython.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
|
|
mPython.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
mPython.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
|
|
mPython.menu.FlashMode.qio=QIO
|
|
mPython.menu.FlashMode.qio.build.flash_mode=dio
|
|
mPython.menu.FlashMode.qio.build.boot=qio
|
|
mPython.menu.FlashMode.dio=DIO
|
|
mPython.menu.FlashMode.dio.build.flash_mode=dio
|
|
mPython.menu.FlashMode.dio.build.boot=dio
|
|
|
|
mPython.menu.FlashFreq.80=80MHz
|
|
mPython.menu.FlashFreq.80.build.flash_freq=80m
|
|
mPython.menu.FlashFreq.40=40MHz
|
|
mPython.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
mPython.menu.FlashSize.8M=8MB (64Mb)
|
|
mPython.menu.FlashSize.8M.build.flash_size=8MB
|
|
|
|
mPython.menu.UploadSpeed.921600=921600
|
|
mPython.menu.UploadSpeed.921600.upload.speed=921600
|
|
mPython.menu.UploadSpeed.115200=115200
|
|
mPython.menu.UploadSpeed.115200.upload.speed=115200
|
|
mPython.menu.UploadSpeed.256000.windows=256000
|
|
mPython.menu.UploadSpeed.256000.upload.speed=256000
|
|
mPython.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
mPython.menu.UploadSpeed.230400=230400
|
|
mPython.menu.UploadSpeed.230400.upload.speed=230400
|
|
mPython.menu.UploadSpeed.460800.linux=460800
|
|
mPython.menu.UploadSpeed.460800.macosx=460800
|
|
mPython.menu.UploadSpeed.460800.upload.speed=460800
|
|
mPython.menu.UploadSpeed.512000.windows=512000
|
|
mPython.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
mPython.menu.DebugLevel.none=None
|
|
mPython.menu.DebugLevel.none.build.code_debug=0
|
|
mPython.menu.DebugLevel.error=Error
|
|
mPython.menu.DebugLevel.error.build.code_debug=1
|
|
mPython.menu.DebugLevel.warn=Warn
|
|
mPython.menu.DebugLevel.warn.build.code_debug=2
|
|
mPython.menu.DebugLevel.info=Info
|
|
mPython.menu.DebugLevel.info.build.code_debug=3
|
|
mPython.menu.DebugLevel.debug=Debug
|
|
mPython.menu.DebugLevel.debug.build.code_debug=4
|
|
mPython.menu.DebugLevel.verbose=Verbose
|
|
mPython.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
mPython.menu.EraseFlash.none=Disabled
|
|
mPython.menu.EraseFlash.none.upload.erase_cmd=
|
|
mPython.menu.EraseFlash.all=Enabled
|
|
mPython.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
OpenKB.name=INEX OpenKB
|
|
|
|
OpenKB.bootloader.tool=esptool_py
|
|
OpenKB.bootloader.tool.default=esptool_py
|
|
|
|
OpenKB.upload.tool=esptool_py
|
|
OpenKB.upload.tool.default=esptool_py
|
|
OpenKB.upload.tool.network=esp_ota
|
|
|
|
OpenKB.upload.maximum_size=1310720
|
|
OpenKB.upload.maximum_data_size=327680
|
|
OpenKB.upload.wait_for_upload_port=true
|
|
OpenKB.upload.flags=
|
|
OpenKB.upload.extra_flags=
|
|
|
|
OpenKB.serial.disableDTR=true
|
|
OpenKB.serial.disableRTS=true
|
|
|
|
OpenKB.build.tarch=xtensa
|
|
OpenKB.build.bootloader_addr=0x1000
|
|
OpenKB.build.target=esp32
|
|
OpenKB.build.mcu=esp32
|
|
OpenKB.build.core=esp32
|
|
OpenKB.build.variant=openkb
|
|
OpenKB.build.board=openkb
|
|
|
|
OpenKB.build.f_cpu=240000000L
|
|
OpenKB.build.flash_mode=dio
|
|
OpenKB.build.flash_size=4MB
|
|
OpenKB.build.boot=dio
|
|
OpenKB.build.partitions=default
|
|
OpenKB.build.defines=
|
|
|
|
OpenKB.menu.FlashFreq.80=80MHz
|
|
OpenKB.menu.FlashFreq.80.build.flash_freq=80m
|
|
OpenKB.menu.FlashFreq.40=40MHz
|
|
OpenKB.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
OpenKB.menu.UploadSpeed.921600=921600
|
|
OpenKB.menu.UploadSpeed.921600.upload.speed=921600
|
|
OpenKB.menu.UploadSpeed.115200=115200
|
|
OpenKB.menu.UploadSpeed.115200.upload.speed=115200
|
|
OpenKB.menu.UploadSpeed.256000.windows=256000
|
|
OpenKB.menu.UploadSpeed.256000.upload.speed=256000
|
|
OpenKB.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
OpenKB.menu.UploadSpeed.230400=230400
|
|
OpenKB.menu.UploadSpeed.230400.upload.speed=230400
|
|
OpenKB.menu.UploadSpeed.460800.linux=460800
|
|
OpenKB.menu.UploadSpeed.460800.macosx=460800
|
|
OpenKB.menu.UploadSpeed.460800.upload.speed=460800
|
|
OpenKB.menu.UploadSpeed.512000.windows=512000
|
|
OpenKB.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
OpenKB.menu.DebugLevel.none=None
|
|
OpenKB.menu.DebugLevel.none.build.code_debug=0
|
|
OpenKB.menu.DebugLevel.error=Error
|
|
OpenKB.menu.DebugLevel.error.build.code_debug=1
|
|
OpenKB.menu.DebugLevel.warn=Warn
|
|
OpenKB.menu.DebugLevel.warn.build.code_debug=2
|
|
OpenKB.menu.DebugLevel.info=Info
|
|
OpenKB.menu.DebugLevel.info.build.code_debug=3
|
|
OpenKB.menu.DebugLevel.debug=Debug
|
|
OpenKB.menu.DebugLevel.debug.build.code_debug=4
|
|
OpenKB.menu.DebugLevel.verbose=Verbose
|
|
OpenKB.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
OpenKB.menu.EraseFlash.none=Disabled
|
|
OpenKB.menu.EraseFlash.none.upload.erase_cmd=
|
|
OpenKB.menu.EraseFlash.all=Enabled
|
|
OpenKB.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
wifiduino32.name=WiFiduino32
|
|
|
|
wifiduino32.bootloader.tool=esptool_py
|
|
wifiduino32.bootloader.tool.default=esptool_py
|
|
|
|
wifiduino32.upload.tool=esptool_py
|
|
wifiduino32.upload.tool.default=esptool_py
|
|
wifiduino32.upload.tool.network=esp_ota
|
|
|
|
wifiduino32.upload.maximum_size=1310720
|
|
wifiduino32.upload.maximum_data_size=327680
|
|
wifiduino32.upload.wait_for_upload_port=true
|
|
wifiduino32.upload.flags=
|
|
wifiduino32.upload.extra_flags=
|
|
|
|
wifiduino32.serial.disableDTR=true
|
|
wifiduino32.serial.disableRTS=true
|
|
|
|
wifiduino32.build.tarch=xtensa
|
|
wifiduino32.build.bootloader_addr=0x1000
|
|
wifiduino32.build.target=esp32
|
|
wifiduino32.build.mcu=esp32
|
|
wifiduino32.build.core=esp32
|
|
wifiduino32.build.variant=wifiduino32
|
|
wifiduino32.build.board=Wifiduino32
|
|
|
|
wifiduino32.build.f_cpu=240000000L
|
|
wifiduino32.build.flash_mode=dio
|
|
wifiduino32.build.flash_size=4MB
|
|
wifiduino32.build.boot=dio
|
|
wifiduino32.build.partitions=default
|
|
wifiduino32.build.defines=
|
|
|
|
wifiduino32.menu.PartitionScheme.default=Default
|
|
wifiduino32.menu.PartitionScheme.default.build.partitions=default
|
|
wifiduino32.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
wifiduino32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
wifiduino32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
wifiduino32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
wifiduino32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
wifiduino32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
wifiduino32.menu.FlashFreq.80=80MHz
|
|
wifiduino32.menu.FlashFreq.80.build.flash_freq=80m
|
|
wifiduino32.menu.FlashFreq.40=40MHz
|
|
wifiduino32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
wifiduino32.menu.UploadSpeed.921600=921600
|
|
wifiduino32.menu.UploadSpeed.921600.upload.speed=921600
|
|
wifiduino32.menu.UploadSpeed.115200=115200
|
|
wifiduino32.menu.UploadSpeed.115200.upload.speed=115200
|
|
wifiduino32.menu.UploadSpeed.256000.windows=256000
|
|
wifiduino32.menu.UploadSpeed.256000.upload.speed=256000
|
|
wifiduino32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
wifiduino32.menu.UploadSpeed.230400=230400
|
|
wifiduino32.menu.UploadSpeed.230400.upload.speed=230400
|
|
wifiduino32.menu.UploadSpeed.460800.linux=460800
|
|
wifiduino32.menu.UploadSpeed.460800.macosx=460800
|
|
wifiduino32.menu.UploadSpeed.460800.upload.speed=460800
|
|
wifiduino32.menu.UploadSpeed.512000.windows=512000
|
|
wifiduino32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
wifiduino32.menu.DebugLevel.none=None
|
|
wifiduino32.menu.DebugLevel.none.build.code_debug=0
|
|
wifiduino32.menu.DebugLevel.error=Error
|
|
wifiduino32.menu.DebugLevel.error.build.code_debug=1
|
|
wifiduino32.menu.DebugLevel.warn=Warn
|
|
wifiduino32.menu.DebugLevel.warn.build.code_debug=2
|
|
wifiduino32.menu.DebugLevel.info=Info
|
|
wifiduino32.menu.DebugLevel.info.build.code_debug=3
|
|
wifiduino32.menu.DebugLevel.debug=Debug
|
|
wifiduino32.menu.DebugLevel.debug.build.code_debug=4
|
|
wifiduino32.menu.DebugLevel.verbose=Verbose
|
|
wifiduino32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
wifiduino32.menu.EraseFlash.none=Disabled
|
|
wifiduino32.menu.EraseFlash.none.upload.erase_cmd=
|
|
wifiduino32.menu.EraseFlash.all=Enabled
|
|
wifiduino32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
wifiduino32c3.name=WiFiduinoV2
|
|
|
|
wifiduino32c3.bootloader.tool=esptool_py
|
|
wifiduino32c3.bootloader.tool.default=esptool_py
|
|
|
|
wifiduino32c3.upload.tool=esptool_py
|
|
wifiduino32c3.upload.tool.default=esptool_py
|
|
wifiduino32c3.upload.tool.network=esp_ota
|
|
|
|
wifiduino32c3.upload.maximum_size=1310720
|
|
wifiduino32c3.upload.maximum_data_size=327680
|
|
wifiduino32c3.upload.flags=
|
|
wifiduino32c3.upload.extra_flags=
|
|
wifiduino32c3.upload.use_1200bps_touch=false
|
|
wifiduino32c3.upload.wait_for_upload_port=false
|
|
|
|
wifiduino32c3.serial.disableDTR=false
|
|
wifiduino32c3.serial.disableRTS=false
|
|
|
|
wifiduino32c3.build.tarch=riscv32
|
|
wifiduino32c3.build.target=esp
|
|
wifiduino32c3.build.mcu=esp32c3
|
|
wifiduino32c3.build.core=esp32
|
|
wifiduino32c3.build.variant=wifiduinov2
|
|
wifiduino32c3.build.board=WiFiduinoV2
|
|
wifiduino32c3.build.bootloader_addr=0x0
|
|
|
|
wifiduino32c3.build.cdc_on_boot=0
|
|
wifiduino32c3.build.f_cpu=160000000L
|
|
wifiduino32c3.build.flash_size=4MB
|
|
wifiduino32c3.build.flash_freq=80m
|
|
wifiduino32c3.build.flash_mode=qio
|
|
wifiduino32c3.build.boot=qio
|
|
wifiduino32c3.build.partitions=default
|
|
wifiduino32c3.build.defines=
|
|
|
|
wifiduino32c3.menu.CDCOnBoot.default=Disabled
|
|
wifiduino32c3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
wifiduino32c3.menu.CDCOnBoot.cdc=Enabled
|
|
wifiduino32c3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
wifiduino32c3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
wifiduino32c3.menu.PartitionScheme.default.build.partitions=default
|
|
wifiduino32c3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
wifiduino32c3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
wifiduino32c3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
wifiduino32c3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
wifiduino32c3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
wifiduino32c3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
wifiduino32c3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
wifiduino32c3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
wifiduino32c3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
wifiduino32c3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
wifiduino32c3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
wifiduino32c3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
wifiduino32c3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
wifiduino32c3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
wifiduino32c3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
wifiduino32c3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
wifiduino32c3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
wifiduino32c3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
wifiduino32c3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
wifiduino32c3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
wifiduino32c3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
wifiduino32c3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
wifiduino32c3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
wifiduino32c3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
wifiduino32c3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
wifiduino32c3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
wifiduino32c3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
wifiduino32c3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
wifiduino32c3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
wifiduino32c3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
wifiduino32c3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
wifiduino32c3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
wifiduino32c3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
wifiduino32c3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
wifiduino32c3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
wifiduino32c3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
wifiduino32c3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
wifiduino32c3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
wifiduino32c3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
wifiduino32c3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
wifiduino32c3.menu.CPUFreq.160=160MHz (WiFi)
|
|
wifiduino32c3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
wifiduino32c3.menu.CPUFreq.80=80MHz (WiFi)
|
|
wifiduino32c3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
wifiduino32c3.menu.CPUFreq.40=40MHz
|
|
wifiduino32c3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
wifiduino32c3.menu.CPUFreq.20=20MHz
|
|
wifiduino32c3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
wifiduino32c3.menu.CPUFreq.10=10MHz
|
|
wifiduino32c3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
wifiduino32c3.menu.FlashMode.qio=QIO
|
|
wifiduino32c3.menu.FlashMode.qio.build.flash_mode=dio
|
|
wifiduino32c3.menu.FlashMode.qio.build.boot=qio
|
|
wifiduino32c3.menu.FlashMode.dio=DIO
|
|
wifiduino32c3.menu.FlashMode.dio.build.flash_mode=dio
|
|
wifiduino32c3.menu.FlashMode.dio.build.boot=dio
|
|
|
|
wifiduino32c3.menu.FlashFreq.80=80MHz
|
|
wifiduino32c3.menu.FlashFreq.80.build.flash_freq=80m
|
|
wifiduino32c3.menu.FlashFreq.40=40MHz
|
|
wifiduino32c3.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
wifiduino32c3.menu.FlashSize.4M=4MB (32Mb)
|
|
wifiduino32c3.menu.FlashSize.4M.build.flash_size=4MB
|
|
wifiduino32c3.menu.FlashSize.8M=8MB (64Mb)
|
|
wifiduino32c3.menu.FlashSize.8M.build.flash_size=8MB
|
|
wifiduino32c3.menu.FlashSize.8M.build.partitions=default_8MB
|
|
wifiduino32c3.menu.FlashSize.2M=2MB (16Mb)
|
|
wifiduino32c3.menu.FlashSize.2M.build.flash_size=2MB
|
|
wifiduino32c3.menu.FlashSize.2M.build.partitions=minimal
|
|
wifiduino32c3.menu.FlashSize.16M=16MB (128Mb)
|
|
wifiduino32c3.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
wifiduino32c3.menu.UploadSpeed.921600=921600
|
|
wifiduino32c3.menu.UploadSpeed.921600.upload.speed=921600
|
|
wifiduino32c3.menu.UploadSpeed.115200=115200
|
|
wifiduino32c3.menu.UploadSpeed.115200.upload.speed=115200
|
|
wifiduino32c3.menu.UploadSpeed.256000.windows=256000
|
|
wifiduino32c3.menu.UploadSpeed.256000.upload.speed=256000
|
|
wifiduino32c3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
wifiduino32c3.menu.UploadSpeed.230400=230400
|
|
wifiduino32c3.menu.UploadSpeed.230400.upload.speed=230400
|
|
wifiduino32c3.menu.UploadSpeed.460800.linux=460800
|
|
wifiduino32c3.menu.UploadSpeed.460800.macosx=460800
|
|
wifiduino32c3.menu.UploadSpeed.460800.upload.speed=460800
|
|
wifiduino32c3.menu.UploadSpeed.512000.windows=512000
|
|
wifiduino32c3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
wifiduino32c3.menu.DebugLevel.none=None
|
|
wifiduino32c3.menu.DebugLevel.none.build.code_debug=0
|
|
wifiduino32c3.menu.DebugLevel.error=Error
|
|
wifiduino32c3.menu.DebugLevel.error.build.code_debug=1
|
|
wifiduino32c3.menu.DebugLevel.warn=Warn
|
|
wifiduino32c3.menu.DebugLevel.warn.build.code_debug=2
|
|
wifiduino32c3.menu.DebugLevel.info=Info
|
|
wifiduino32c3.menu.DebugLevel.info.build.code_debug=3
|
|
wifiduino32c3.menu.DebugLevel.debug=Debug
|
|
wifiduino32c3.menu.DebugLevel.debug.build.code_debug=4
|
|
wifiduino32c3.menu.DebugLevel.verbose=Verbose
|
|
wifiduino32c3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
wifiduino32c3.menu.EraseFlash.none=Disabled
|
|
wifiduino32c3.menu.EraseFlash.none.upload.erase_cmd=
|
|
wifiduino32c3.menu.EraseFlash.all=Enabled
|
|
wifiduino32c3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
wifiduino32s3.name=WiFiduino32S3
|
|
|
|
wifiduino32s3.bootloader.tool=esptool_py
|
|
wifiduino32s3.bootloader.tool.default=esptool_py
|
|
|
|
wifiduino32s3.upload.tool=esptool_py
|
|
wifiduino32s3.upload.tool.default=esptool_py
|
|
wifiduino32s3.upload.tool.network=esp_ota
|
|
|
|
wifiduino32s3.upload.maximum_size=1310720
|
|
wifiduino32s3.upload.maximum_data_size=327680
|
|
wifiduino32s3.upload.flags=
|
|
wifiduino32s3.upload.extra_flags=
|
|
wifiduino32s3.upload.use_1200bps_touch=false
|
|
wifiduino32s3.upload.wait_for_upload_port=false
|
|
|
|
wifiduino32s3.serial.disableDTR=false
|
|
wifiduino32s3.serial.disableRTS=false
|
|
|
|
wifiduino32s3.build.tarch=xtensa
|
|
wifiduino32s3.build.bootloader_addr=0x0
|
|
wifiduino32s3.build.target=esp32s3
|
|
wifiduino32s3.build.mcu=esp32s3
|
|
wifiduino32s3.build.core=esp32
|
|
wifiduino32s3.build.variant=wifiduino32s3
|
|
wifiduino32s3.build.board=WiFiduino32S3
|
|
|
|
wifiduino32s3.build.usb_mode=1
|
|
wifiduino32s3.build.cdc_on_boot=0
|
|
wifiduino32s3.build.msc_on_boot=0
|
|
wifiduino32s3.build.dfu_on_boot=0
|
|
wifiduino32s3.build.f_cpu=240000000L
|
|
wifiduino32s3.build.flash_size=4MB
|
|
wifiduino32s3.build.flash_freq=80m
|
|
wifiduino32s3.build.flash_mode=dio
|
|
wifiduino32s3.build.boot=qio
|
|
wifiduino32s3.build.boot_freq=80m
|
|
wifiduino32s3.build.partitions=default
|
|
wifiduino32s3.build.defines=
|
|
wifiduino32s3.build.loop_core=
|
|
wifiduino32s3.build.event_core=
|
|
wifiduino32s3.build.psram_type=qspi
|
|
wifiduino32s3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
wifiduino32s3.menu.PSRAM.disabled=Disabled
|
|
wifiduino32s3.menu.PSRAM.disabled.build.defines=
|
|
wifiduino32s3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
wifiduino32s3.menu.PSRAM.enabled=QSPI PSRAM
|
|
wifiduino32s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
wifiduino32s3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
wifiduino32s3.menu.PSRAM.opi=OPI PSRAM
|
|
wifiduino32s3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
wifiduino32s3.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
wifiduino32s3.menu.FlashMode.qio=QIO 80MHz
|
|
wifiduino32s3.menu.FlashMode.qio.build.flash_mode=dio
|
|
wifiduino32s3.menu.FlashMode.qio.build.boot=qio
|
|
wifiduino32s3.menu.FlashMode.qio.build.boot_freq=80m
|
|
wifiduino32s3.menu.FlashMode.qio.build.flash_freq=80m
|
|
wifiduino32s3.menu.FlashMode.qio120=QIO 120MHz
|
|
wifiduino32s3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
wifiduino32s3.menu.FlashMode.qio120.build.boot=qio
|
|
wifiduino32s3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
wifiduino32s3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
wifiduino32s3.menu.FlashMode.dio=DIO 80MHz
|
|
wifiduino32s3.menu.FlashMode.dio.build.flash_mode=dio
|
|
wifiduino32s3.menu.FlashMode.dio.build.boot=dio
|
|
wifiduino32s3.menu.FlashMode.dio.build.boot_freq=80m
|
|
wifiduino32s3.menu.FlashMode.dio.build.flash_freq=80m
|
|
wifiduino32s3.menu.FlashMode.opi=OPI 80MHz
|
|
wifiduino32s3.menu.FlashMode.opi.build.flash_mode=dout
|
|
wifiduino32s3.menu.FlashMode.opi.build.boot=opi
|
|
wifiduino32s3.menu.FlashMode.opi.build.boot_freq=80m
|
|
wifiduino32s3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
wifiduino32s3.menu.FlashSize.4M=4MB (32Mb)
|
|
wifiduino32s3.menu.FlashSize.4M.build.flash_size=4MB
|
|
wifiduino32s3.menu.FlashSize.8M=8MB (64Mb)
|
|
wifiduino32s3.menu.FlashSize.8M.build.flash_size=8MB
|
|
wifiduino32s3.menu.FlashSize.8M.build.partitions=default_8MB
|
|
wifiduino32s3.menu.FlashSize.16M=16MB (128Mb)
|
|
wifiduino32s3.menu.FlashSize.16M.build.flash_size=16MB
|
|
#wifiduino32s3.menu.FlashSize.32M=32MB (256Mb)
|
|
#wifiduino32s3.menu.FlashSize.32M.build.flash_size=32MB
|
|
|
|
wifiduino32s3.menu.LoopCore.1=Core 1
|
|
wifiduino32s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
wifiduino32s3.menu.LoopCore.0=Core 0
|
|
wifiduino32s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
wifiduino32s3.menu.EventsCore.1=Core 1
|
|
wifiduino32s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
wifiduino32s3.menu.EventsCore.0=Core 0
|
|
wifiduino32s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
wifiduino32s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
wifiduino32s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
wifiduino32s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
wifiduino32s3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
wifiduino32s3.menu.CDCOnBoot.default=Disabled
|
|
wifiduino32s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
wifiduino32s3.menu.CDCOnBoot.cdc=Enabled
|
|
wifiduino32s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
wifiduino32s3.menu.MSCOnBoot.default=Disabled
|
|
wifiduino32s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
wifiduino32s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
wifiduino32s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
wifiduino32s3.menu.DFUOnBoot.default=Disabled
|
|
wifiduino32s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
wifiduino32s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
wifiduino32s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
wifiduino32s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
wifiduino32s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
wifiduino32s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
wifiduino32s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
wifiduino32s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
wifiduino32s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
wifiduino32s3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
wifiduino32s3.menu.PartitionScheme.default.build.partitions=default
|
|
wifiduino32s3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
wifiduino32s3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
wifiduino32s3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
wifiduino32s3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
wifiduino32s3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
wifiduino32s3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
wifiduino32s3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
wifiduino32s3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
wifiduino32s3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
wifiduino32s3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
wifiduino32s3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
wifiduino32s3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
wifiduino32s3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
wifiduino32s3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
wifiduino32s3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
wifiduino32s3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
wifiduino32s3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
wifiduino32s3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
wifiduino32s3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
wifiduino32s3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
wifiduino32s3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
wifiduino32s3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
wifiduino32s3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
wifiduino32s3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
wifiduino32s3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
wifiduino32s3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
wifiduino32s3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
wifiduino32s3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
wifiduino32s3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
wifiduino32s3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
wifiduino32s3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
wifiduino32s3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
wifiduino32s3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
wifiduino32s3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
wifiduino32s3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
wifiduino32s3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
wifiduino32s3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
wifiduino32s3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
wifiduino32s3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
wifiduino32s3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
wifiduino32s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
wifiduino32s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
wifiduino32s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
wifiduino32s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
wifiduino32s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
wifiduino32s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
wifiduino32s3.menu.CPUFreq.40=40MHz
|
|
wifiduino32s3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
wifiduino32s3.menu.CPUFreq.20=20MHz
|
|
wifiduino32s3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
wifiduino32s3.menu.CPUFreq.10=10MHz
|
|
wifiduino32s3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
wifiduino32s3.menu.UploadSpeed.921600=921600
|
|
wifiduino32s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
wifiduino32s3.menu.UploadSpeed.115200=115200
|
|
wifiduino32s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
wifiduino32s3.menu.UploadSpeed.256000.windows=256000
|
|
wifiduino32s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
wifiduino32s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
wifiduino32s3.menu.UploadSpeed.230400=230400
|
|
wifiduino32s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
wifiduino32s3.menu.UploadSpeed.460800.linux=460800
|
|
wifiduino32s3.menu.UploadSpeed.460800.macosx=460800
|
|
wifiduino32s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
wifiduino32s3.menu.UploadSpeed.512000.windows=512000
|
|
wifiduino32s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
wifiduino32s3.menu.DebugLevel.none=None
|
|
wifiduino32s3.menu.DebugLevel.none.build.code_debug=0
|
|
wifiduino32s3.menu.DebugLevel.error=Error
|
|
wifiduino32s3.menu.DebugLevel.error.build.code_debug=1
|
|
wifiduino32s3.menu.DebugLevel.warn=Warn
|
|
wifiduino32s3.menu.DebugLevel.warn.build.code_debug=2
|
|
wifiduino32s3.menu.DebugLevel.info=Info
|
|
wifiduino32s3.menu.DebugLevel.info.build.code_debug=3
|
|
wifiduino32s3.menu.DebugLevel.debug=Debug
|
|
wifiduino32s3.menu.DebugLevel.debug.build.code_debug=4
|
|
wifiduino32s3.menu.DebugLevel.verbose=Verbose
|
|
wifiduino32s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
wifiduino32s3.menu.EraseFlash.none=Disabled
|
|
wifiduino32s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
wifiduino32s3.menu.EraseFlash.all=Enabled
|
|
wifiduino32s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
imbrios-logsens-v1p1.name=IMBRIOS LOGSENS_V1P1
|
|
|
|
imbrios-logsens-v1p1.bootloader.tool=esptool_py
|
|
imbrios-logsens-v1p1.bootloader.tool.default=esptool_py
|
|
|
|
imbrios-logsens-v1p1.upload.tool=esptool_py
|
|
imbrios-logsens-v1p1.upload.tool.default=esptool_py
|
|
imbrios-logsens-v1p1.upload.tool.network=esp_ota
|
|
|
|
imbrios-logsens-v1p1.upload.maximum_size=1310720
|
|
imbrios-logsens-v1p1.upload.maximum_data_size=327680
|
|
imbrios-logsens-v1p1.upload.wait_for_upload_port=true
|
|
imbrios-logsens-v1p1.upload.flags=
|
|
imbrios-logsens-v1p1.upload.extra_flags=
|
|
|
|
imbrios-logsens-v1p1.serial.disableDTR=true
|
|
imbrios-logsens-v1p1.serial.disableRTS=true
|
|
|
|
imbrios-logsens-v1p1.build.tarch=xtensa
|
|
imbrios-logsens-v1p1.build.bootloader_addr=0x1000
|
|
imbrios-logsens-v1p1.build.target=esp32
|
|
imbrios-logsens-v1p1.build.mcu=esp32
|
|
imbrios-logsens-v1p1.build.core=esp32
|
|
imbrios-logsens-v1p1.build.variant=imbrios-logsens-v1p1
|
|
imbrios-logsens-v1p1.build.board=IMBRIOS_LOGSENS_V1P1
|
|
|
|
imbrios-logsens-v1p1.build.f_cpu=240000000L
|
|
imbrios-logsens-v1p1.build.flash_mode=dio
|
|
imbrios-logsens-v1p1.build.flash_size=4MB
|
|
imbrios-logsens-v1p1.build.boot=dio
|
|
imbrios-logsens-v1p1.build.partitions=default
|
|
imbrios-logsens-v1p1.build.defines=
|
|
|
|
imbrios-logsens-v1p1.menu.FlashFreq.80=80MHz
|
|
imbrios-logsens-v1p1.menu.FlashFreq.80.build.flash_freq=80m
|
|
imbrios-logsens-v1p1.menu.FlashFreq.40=40MHz
|
|
imbrios-logsens-v1p1.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
imbrios-logsens-v1p1.menu.PartitionScheme.default=Default
|
|
imbrios-logsens-v1p1.menu.PartitionScheme.default.build.partitions=default
|
|
imbrios-logsens-v1p1.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
imbrios-logsens-v1p1.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
imbrios-logsens-v1p1.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
imbrios-logsens-v1p1.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
imbrios-logsens-v1p1.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
imbrios-logsens-v1p1.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
imbrios-logsens-v1p1.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
imbrios-logsens-v1p1.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
imbrios-logsens-v1p1.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
imbrios-logsens-v1p1.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
imbrios-logsens-v1p1.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
imbrios-logsens-v1p1.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
imbrios-logsens-v1p1.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
imbrios-logsens-v1p1.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
imbrios-logsens-v1p1.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
imbrios-logsens-v1p1.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
imbrios-logsens-v1p1.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
imbrios-logsens-v1p1.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
imbrios-logsens-v1p1.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
imbrios-logsens-v1p1.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
imbrios-logsens-v1p1.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
imbrios-logsens-v1p1.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
imbrios-logsens-v1p1.menu.UploadSpeed.921600=921600
|
|
imbrios-logsens-v1p1.menu.UploadSpeed.921600.upload.speed=921600
|
|
imbrios-logsens-v1p1.menu.UploadSpeed.115200=115200
|
|
imbrios-logsens-v1p1.menu.UploadSpeed.115200.upload.speed=115200
|
|
imbrios-logsens-v1p1.menu.UploadSpeed.256000.windows=256000
|
|
imbrios-logsens-v1p1.menu.UploadSpeed.256000.upload.speed=256000
|
|
imbrios-logsens-v1p1.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
imbrios-logsens-v1p1.menu.UploadSpeed.230400=230400
|
|
imbrios-logsens-v1p1.menu.UploadSpeed.230400.upload.speed=230400
|
|
imbrios-logsens-v1p1.menu.UploadSpeed.460800.linux=460800
|
|
imbrios-logsens-v1p1.menu.UploadSpeed.460800.macosx=460800
|
|
imbrios-logsens-v1p1.menu.UploadSpeed.460800.upload.speed=460800
|
|
imbrios-logsens-v1p1.menu.UploadSpeed.512000.windows=512000
|
|
imbrios-logsens-v1p1.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
imbrios-logsens-v1p1.menu.DebugLevel.none=None
|
|
imbrios-logsens-v1p1.menu.DebugLevel.none.build.code_debug=0
|
|
imbrios-logsens-v1p1.menu.DebugLevel.error=Error
|
|
imbrios-logsens-v1p1.menu.DebugLevel.error.build.code_debug=1
|
|
imbrios-logsens-v1p1.menu.DebugLevel.warn=Warn
|
|
imbrios-logsens-v1p1.menu.DebugLevel.warn.build.code_debug=2
|
|
imbrios-logsens-v1p1.menu.DebugLevel.info=Info
|
|
imbrios-logsens-v1p1.menu.DebugLevel.info.build.code_debug=3
|
|
imbrios-logsens-v1p1.menu.DebugLevel.debug=Debug
|
|
imbrios-logsens-v1p1.menu.DebugLevel.debug.build.code_debug=4
|
|
imbrios-logsens-v1p1.menu.DebugLevel.verbose=Verbose
|
|
imbrios-logsens-v1p1.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
imbrios-logsens-v1p1.menu.EraseFlash.none=Disabled
|
|
imbrios-logsens-v1p1.menu.EraseFlash.none.upload.erase_cmd=
|
|
imbrios-logsens-v1p1.menu.EraseFlash.all=Enabled
|
|
imbrios-logsens-v1p1.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
healthypi4.name=ProtoCentral HealthyPi 4
|
|
|
|
healthypi4.bootloader.tool=esptool_py
|
|
healthypi4.bootloader.tool.default=esptool_py
|
|
|
|
healthypi4.upload.tool=esptool_py
|
|
healthypi4.upload.tool.default=esptool_py
|
|
healthypi4.upload.tool.network=esp_ota
|
|
|
|
healthypi4.upload.maximum_size=1310720
|
|
healthypi4.upload.maximum_data_size=327680
|
|
healthypi4.upload.wait_for_upload_port=true
|
|
healthypi4.upload.flags=
|
|
healthypi4.upload.extra_flags=
|
|
|
|
healthypi4.serial.disableDTR=true
|
|
healthypi4.serial.disableRTS=true
|
|
|
|
healthypi4.build.tarch=xtensa
|
|
healthypi4.build.bootloader_addr=0x1000
|
|
healthypi4.build.target=esp32
|
|
healthypi4.build.mcu=esp32
|
|
healthypi4.build.core=esp32
|
|
healthypi4.build.variant=healthypi4
|
|
healthypi4.build.board=HEALTHYPI_4
|
|
|
|
healthypi4.build.f_cpu=240000000L
|
|
healthypi4.build.flash_mode=dio
|
|
healthypi4.build.flash_size=4MB
|
|
healthypi4.build.boot=dio
|
|
healthypi4.build.partitions=min_spiffs
|
|
healthypi4.build.defines=
|
|
|
|
healthypi4.menu.FlashFreq.80=80MHz
|
|
healthypi4.menu.FlashFreq.80.build.flash_freq=80m
|
|
healthypi4.menu.FlashFreq.40=40MHz
|
|
healthypi4.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
healthypi4.menu.PartitionScheme.default=Default
|
|
healthypi4.menu.PartitionScheme.default.build.partitions=default
|
|
healthypi4.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
healthypi4.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
healthypi4.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
healthypi4.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
healthypi4.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
healthypi4.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
healthypi4.menu.UploadSpeed.921600=921600
|
|
healthypi4.menu.UploadSpeed.921600.upload.speed=921600
|
|
healthypi4.menu.UploadSpeed.115200=115200
|
|
healthypi4.menu.UploadSpeed.115200.upload.speed=115200
|
|
healthypi4.menu.UploadSpeed.256000.windows=256000
|
|
healthypi4.menu.UploadSpeed.256000.upload.speed=256000
|
|
healthypi4.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
healthypi4.menu.UploadSpeed.230400=230400
|
|
healthypi4.menu.UploadSpeed.230400.upload.speed=230400
|
|
healthypi4.menu.UploadSpeed.460800.linux=460800
|
|
healthypi4.menu.UploadSpeed.460800.macosx=460800
|
|
healthypi4.menu.UploadSpeed.460800.upload.speed=460800
|
|
healthypi4.menu.UploadSpeed.512000.windows=512000
|
|
healthypi4.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
healthypi4.menu.DebugLevel.none=None
|
|
healthypi4.menu.DebugLevel.none.build.code_debug=0
|
|
healthypi4.menu.DebugLevel.error=Error
|
|
healthypi4.menu.DebugLevel.error.build.code_debug=1
|
|
healthypi4.menu.DebugLevel.warn=Warn
|
|
healthypi4.menu.DebugLevel.warn.build.code_debug=2
|
|
healthypi4.menu.DebugLevel.info=Info
|
|
healthypi4.menu.DebugLevel.info.build.code_debug=3
|
|
healthypi4.menu.DebugLevel.debug=Debug
|
|
healthypi4.menu.DebugLevel.debug.build.code_debug=4
|
|
healthypi4.menu.DebugLevel.verbose=Verbose
|
|
healthypi4.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
healthypi4.menu.EraseFlash.none=Disabled
|
|
healthypi4.menu.EraseFlash.none.upload.erase_cmd=
|
|
healthypi4.menu.EraseFlash.all=Enabled
|
|
healthypi4.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
ET-Board.name=ET-Board
|
|
|
|
ET-Board.bootloader.tool=esptool_py
|
|
ET-Board.bootloader.tool.default=esptool_py
|
|
|
|
ET-Board.upload.tool=esptool_py
|
|
ET-Board.upload.tool.default=esptool_py
|
|
ET-Board.upload.tool.network=esp_ota
|
|
|
|
ET-Board.upload.maximum_size=1310720
|
|
ET-Board.upload.maximum_data_size=327680
|
|
ET-Board.upload.wait_for_upload_port=true
|
|
ET-Board.upload.flags=
|
|
ET-Board.upload.extra_flags=
|
|
|
|
ET-Board.serial.disableDTR=true
|
|
ET-Board.serial.disableRTS=true
|
|
|
|
ET-Board.build.tarch=xtensa
|
|
ET-Board.build.bootloader_addr=0x1000
|
|
ET-Board.build.target=esp32
|
|
ET-Board.build.mcu=esp32
|
|
ET-Board.build.core=esp32
|
|
ET-Board.build.variant=ET-Board
|
|
ET-Board.build.board=ET-Board
|
|
ET-Board.build.f_cpu=240000000L
|
|
ET-Board.build.flash_mode=dio
|
|
ET-Board.build.flash_size=4MB
|
|
ET-Board.build.boot=dio
|
|
ET-Board.build.partitions=default
|
|
ET-Board.build.defines=
|
|
|
|
ET-Board.menu.PartitionScheme.default=Default
|
|
ET-Board.menu.PartitionScheme.default.build.partitions=default
|
|
ET-Board.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
ET-Board.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
ET-Board.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
ET-Board.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
ET-Board.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
ET-Board.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
ET-Board.menu.FlashFreq.80=80MHz
|
|
ET-Board.menu.FlashFreq.80.build.flash_freq=80m
|
|
ET-Board.menu.FlashFreq.40=40MHz
|
|
ET-Board.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
ET-Board.menu.UploadSpeed.921600=921600
|
|
ET-Board.menu.UploadSpeed.921600.upload.speed=921600
|
|
ET-Board.menu.UploadSpeed.115200=115200
|
|
ET-Board.menu.UploadSpeed.115200.upload.speed=115200
|
|
ET-Board.menu.UploadSpeed.256000.windows=256000
|
|
ET-Board.menu.UploadSpeed.256000.upload.speed=256000
|
|
ET-Board.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
ET-Board.menu.UploadSpeed.230400=230400
|
|
ET-Board.menu.UploadSpeed.230400.upload.speed=230400
|
|
ET-Board.menu.UploadSpeed.460800.linux=460800
|
|
ET-Board.menu.UploadSpeed.460800.macosx=460800
|
|
ET-Board.menu.UploadSpeed.460800.upload.speed=460800
|
|
ET-Board.menu.UploadSpeed.512000.windows=512000
|
|
ET-Board.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
ET-Board.menu.DebugLevel.none=None
|
|
ET-Board.menu.DebugLevel.none.build.code_debug=0
|
|
ET-Board.menu.DebugLevel.error=Error
|
|
ET-Board.menu.DebugLevel.error.build.code_debug=1
|
|
ET-Board.menu.DebugLevel.warn=Warn
|
|
ET-Board.menu.DebugLevel.warn.build.code_debug=2
|
|
ET-Board.menu.DebugLevel.info=Info
|
|
ET-Board.menu.DebugLevel.info.build.code_debug=3
|
|
ET-Board.menu.DebugLevel.debug=Debug
|
|
ET-Board.menu.DebugLevel.debug.build.code_debug=4
|
|
ET-Board.menu.DebugLevel.verbose=Verbose
|
|
ET-Board.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
ET-Board.menu.EraseFlash.none=Disabled
|
|
ET-Board.menu.EraseFlash.none.upload.erase_cmd=
|
|
ET-Board.menu.EraseFlash.all=Enabled
|
|
ET-Board.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
ch_denky.name=Denky
|
|
|
|
ch_denky.bootloader.tool=esptool_py
|
|
ch_denky.bootloader.tool.default=esptool_py
|
|
|
|
ch_denky.upload.tool=esptool_py
|
|
ch_denky.upload.tool.default=esptool_py
|
|
ch_denky.upload.tool.network=esp_ota
|
|
|
|
ch_denky.upload.maximum_size=1310720
|
|
ch_denky.upload.maximum_data_size=327680
|
|
ch_denky.upload.flags=
|
|
ch_denky.upload.extra_flags=
|
|
|
|
ch_denky.serial.disableDTR=true
|
|
ch_denky.serial.disableRTS=true
|
|
|
|
ch_denky.build.tarch=xtensa
|
|
ch_denky.build.bootloader_addr=0x1000
|
|
ch_denky.build.target=esp32
|
|
ch_denky.build.mcu=esp32
|
|
ch_denky.build.core=esp32
|
|
ch_denky.build.variant=ch_denky
|
|
ch_denky.build.board=DENKY
|
|
|
|
ch_denky.build.f_cpu=240000000L
|
|
ch_denky.build.flash_size=4MB
|
|
ch_denky.build.flash_freq=80m
|
|
ch_denky.build.flash_mode=dio
|
|
ch_denky.build.boot=dio
|
|
ch_denky.build.partitions=default
|
|
ch_denky.build.defines=
|
|
|
|
ch_denky.menu.Revision.denkyd4=PICO-V3-02
|
|
ch_denky.menu.Revision.denkyd4.build.board=DENKY_PICOV3
|
|
ch_denky.menu.Revision.denkyd4.build.flash_size=8MB
|
|
ch_denky.menu.Revision.denky32=WROOM32
|
|
ch_denky.menu.Revision.denky32.build.board=DENKY_WROOM32
|
|
ch_denky.menu.Revision.denkyd4.build.flash_size=4MB
|
|
|
|
ch_denky.menu.PartitionScheme.default=Default
|
|
ch_denky.menu.PartitionScheme.default.build.partitions=default
|
|
ch_denky.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
ch_denky.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
ch_denky.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
ch_denky.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
ch_denky.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
ch_denky.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
ch_denky.menu.UploadSpeed.921600=921600
|
|
ch_denky.menu.UploadSpeed.921600.upload.speed=921600
|
|
ch_denky.menu.UploadSpeed.115200=115200
|
|
ch_denky.menu.UploadSpeed.115200.upload.speed=115200
|
|
ch_denky.menu.UploadSpeed.256000.windows=256000
|
|
ch_denky.menu.UploadSpeed.256000.upload.speed=256000
|
|
ch_denky.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
ch_denky.menu.UploadSpeed.230400=230400
|
|
ch_denky.menu.UploadSpeed.230400.upload.speed=230400
|
|
ch_denky.menu.UploadSpeed.460800.linux=460800
|
|
ch_denky.menu.UploadSpeed.460800.macosx=460800
|
|
ch_denky.menu.UploadSpeed.460800.upload.speed=460800
|
|
ch_denky.menu.UploadSpeed.512000.windows=512000
|
|
ch_denky.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
ch_denky.menu.PSRAM.enabled=Enabled
|
|
ch_denky.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
ch_denky.menu.PSRAM.enabled.build.extra_libs=
|
|
ch_denky.menu.PSRAM.disabled=Disabled
|
|
ch_denky.menu.PSRAM.disabled.build.defines=
|
|
ch_denky.menu.PSRAM.disabled.build.extra_libs=
|
|
|
|
ch_denky.menu.DebugLevel.none=None
|
|
ch_denky.menu.DebugLevel.none.build.code_debug=0
|
|
ch_denky.menu.DebugLevel.error=Error
|
|
ch_denky.menu.DebugLevel.error.build.code_debug=1
|
|
ch_denky.menu.DebugLevel.warn=Warn
|
|
ch_denky.menu.DebugLevel.warn.build.code_debug=2
|
|
ch_denky.menu.DebugLevel.info=Info
|
|
ch_denky.menu.DebugLevel.info.build.code_debug=3
|
|
ch_denky.menu.DebugLevel.debug=Debug
|
|
ch_denky.menu.DebugLevel.debug.build.code_debug=4
|
|
ch_denky.menu.DebugLevel.verbose=Verbose
|
|
ch_denky.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
ch_denky.menu.EraseFlash.none=Disabled
|
|
ch_denky.menu.EraseFlash.none.upload.erase_cmd=
|
|
ch_denky.menu.EraseFlash.all=Enabled
|
|
ch_denky.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
uPesy_wrover.name=uPesy ESP32 Wrover DevKit
|
|
|
|
uPesy_wrover.bootloader.tool=esptool_py
|
|
uPesy_wrover.bootloader.tool.default=esptool_py
|
|
|
|
uPesy_wrover.upload.tool=esptool_py
|
|
uPesy_wrover.upload.tool.default=esptool_py
|
|
uPesy_wrover.upload.tool.network=esp_ota
|
|
|
|
uPesy_wrover.upload.maximum_size=1310720
|
|
uPesy_wrover.upload.maximum_data_size=327680
|
|
uPesy_wrover.upload.flags=
|
|
uPesy_wrover.upload.extra_flags=
|
|
|
|
uPesy_wrover.serial.disableDTR=true
|
|
uPesy_wrover.serial.disableRTS=true
|
|
|
|
uPesy_wrover.build.tarch=xtensa
|
|
uPesy_wrover.build.bootloader_addr=0x1000
|
|
uPesy_wrover.build.target=esp32
|
|
uPesy_wrover.build.mcu=esp32
|
|
uPesy_wrover.build.core=esp32
|
|
uPesy_wrover.build.variant=uPesy_esp32_wrover_devkit
|
|
uPesy_wrover.build.board=UPESY_WROVER
|
|
|
|
uPesy_wrover.build.f_cpu=240000000L
|
|
uPesy_wrover.build.flash_size=4MB
|
|
uPesy_wrover.build.flash_freq=80m
|
|
uPesy_wrover.build.flash_mode=dio
|
|
uPesy_wrover.build.boot=dio
|
|
uPesy_wrover.build.partitions=default
|
|
uPesy_wrover.build.defines=
|
|
|
|
uPesy_wrover.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
uPesy_wrover.menu.PartitionScheme.default.build.partitions=default
|
|
uPesy_wrover.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
uPesy_wrover.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
uPesy_wrover.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
uPesy_wrover.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
uPesy_wrover.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
uPesy_wrover.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
uPesy_wrover.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
uPesy_wrover.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
uPesy_wrover.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
uPesy_wrover.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
uPesy_wrover.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
uPesy_wrover.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
uPesy_wrover.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
uPesy_wrover.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
uPesy_wrover.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
uPesy_wrover.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
uPesy_wrover.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
uPesy_wrover.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
uPesy_wrover.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
uPesy_wrover.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
uPesy_wrover.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
uPesy_wrover.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
uPesy_wrover.menu.CPUFreq.240=240MHz
|
|
uPesy_wrover.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
uPesy_wrover.menu.CPUFreq.160=160MHz
|
|
uPesy_wrover.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
|
|
uPesy_wrover.menu.UploadSpeed.921600=921600
|
|
uPesy_wrover.menu.UploadSpeed.921600.upload.speed=921600
|
|
uPesy_wrover.menu.UploadSpeed.512000.windows=512000
|
|
uPesy_wrover.menu.UploadSpeed.512000.upload.speed=512000
|
|
uPesy_wrover.menu.UploadSpeed.460800.linux=460800
|
|
uPesy_wrover.menu.UploadSpeed.460800.macosx=460800
|
|
uPesy_wrover.menu.UploadSpeed.460800.upload.speed=460800
|
|
uPesy_wrover.menu.UploadSpeed.256000.windows=256000
|
|
uPesy_wrover.menu.UploadSpeed.256000.upload.speed=256000
|
|
uPesy_wrover.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
uPesy_wrover.menu.UploadSpeed.230400=230400
|
|
uPesy_wrover.menu.UploadSpeed.230400.upload.speed=230400
|
|
uPesy_wrover.menu.UploadSpeed.115200=115200
|
|
uPesy_wrover.menu.UploadSpeed.115200.upload.speed=115200
|
|
|
|
uPesy_wrover.menu.FlashMode.qio=QIO
|
|
uPesy_wrover.menu.FlashMode.qio.build.flash_mode=dio
|
|
uPesy_wrover.menu.FlashMode.qio.build.boot=qio
|
|
uPesy_wrover.menu.FlashMode.dio=DIO
|
|
uPesy_wrover.menu.FlashMode.dio.build.flash_mode=dio
|
|
uPesy_wrover.menu.FlashMode.dio.build.boot=dio
|
|
|
|
uPesy_wrover.menu.FlashFreq.80=80MHz
|
|
uPesy_wrover.menu.FlashFreq.80.build.flash_freq=80m
|
|
uPesy_wrover.menu.FlashFreq.40=40MHz
|
|
uPesy_wrover.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
uPesy_wrover.menu.PSRAM.enabled=Enabled
|
|
uPesy_wrover.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
uPesy_wrover.menu.PSRAM.enabled.build.extra_libs=
|
|
uPesy_wrover.menu.PSRAM.disabled=Disabled
|
|
uPesy_wrover.menu.PSRAM.disabled.build.defines=
|
|
uPesy_wrover.menu.PSRAM.disabled.build.extra_libs=
|
|
|
|
uPesy_wrover.menu.DebugLevel.none=None
|
|
uPesy_wrover.menu.DebugLevel.none.build.code_debug=0
|
|
uPesy_wrover.menu.DebugLevel.error=Error
|
|
uPesy_wrover.menu.DebugLevel.error.build.code_debug=1
|
|
uPesy_wrover.menu.DebugLevel.warn=Warn
|
|
uPesy_wrover.menu.DebugLevel.warn.build.code_debug=2
|
|
uPesy_wrover.menu.DebugLevel.info=Info
|
|
uPesy_wrover.menu.DebugLevel.info.build.code_debug=3
|
|
uPesy_wrover.menu.DebugLevel.debug=Debug
|
|
uPesy_wrover.menu.DebugLevel.debug.build.code_debug=4
|
|
uPesy_wrover.menu.DebugLevel.verbose=Verbose
|
|
uPesy_wrover.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
uPesy_wrover.menu.EraseFlash.none=Disabled
|
|
uPesy_wrover.menu.EraseFlash.none.upload.erase_cmd=
|
|
uPesy_wrover.menu.EraseFlash.all=Enabled
|
|
uPesy_wrover.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
uPesy_wroom.name=uPesy ESP32 Wroom DevKit
|
|
|
|
uPesy_wroom.bootloader.tool=esptool_py
|
|
uPesy_wroom.bootloader.tool.default=esptool_py
|
|
|
|
uPesy_wroom.upload.tool=esptool_py
|
|
uPesy_wroom.upload.tool.default=esptool_py
|
|
uPesy_wroom.upload.tool.network=esp_ota
|
|
|
|
uPesy_wroom.upload.maximum_size=1310720
|
|
uPesy_wroom.upload.maximum_data_size=327680
|
|
uPesy_wroom.upload.flags=
|
|
uPesy_wroom.upload.extra_flags=
|
|
|
|
uPesy_wroom.serial.disableDTR=true
|
|
uPesy_wroom.serial.disableRTS=true
|
|
|
|
uPesy_wroom.build.tarch=xtensa
|
|
uPesy_wroom.build.bootloader_addr=0x1000
|
|
uPesy_wroom.build.target=esp32
|
|
uPesy_wroom.build.mcu=esp32
|
|
uPesy_wroom.build.core=esp32
|
|
uPesy_wroom.build.variant=uPesy_esp32_wroom_devkit
|
|
uPesy_wroom.build.board=UPESY_WROOM
|
|
|
|
uPesy_wroom.build.f_cpu=240000000L
|
|
uPesy_wroom.build.flash_size=4MB
|
|
uPesy_wroom.build.flash_freq=80m
|
|
uPesy_wroom.build.flash_mode=dio
|
|
uPesy_wroom.build.boot=dio
|
|
uPesy_wroom.build.partitions=default
|
|
uPesy_wroom.build.defines=
|
|
|
|
uPesy_wroom.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
uPesy_wroom.menu.PartitionScheme.default.build.partitions=default
|
|
uPesy_wroom.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
uPesy_wroom.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
uPesy_wroom.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
uPesy_wroom.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
uPesy_wroom.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
uPesy_wroom.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
uPesy_wroom.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
uPesy_wroom.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
uPesy_wroom.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
uPesy_wroom.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
uPesy_wroom.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
uPesy_wroom.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
uPesy_wroom.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
uPesy_wroom.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
uPesy_wroom.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
uPesy_wroom.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
uPesy_wroom.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
uPesy_wroom.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
uPesy_wroom.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
uPesy_wroom.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
uPesy_wroom.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
uPesy_wroom.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
uPesy_wroom.menu.CPUFreq.240=240MHz
|
|
uPesy_wroom.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
uPesy_wroom.menu.CPUFreq.160=160MHz
|
|
uPesy_wroom.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
|
|
uPesy_wroom.menu.UploadSpeed.921600=921600
|
|
uPesy_wroom.menu.UploadSpeed.921600.upload.speed=921600
|
|
uPesy_wroom.menu.UploadSpeed.512000.windows=512000
|
|
uPesy_wroom.menu.UploadSpeed.512000.upload.speed=512000
|
|
uPesy_wroom.menu.UploadSpeed.460800.linux=460800
|
|
uPesy_wroom.menu.UploadSpeed.460800.macosx=460800
|
|
uPesy_wroom.menu.UploadSpeed.460800.upload.speed=460800
|
|
uPesy_wroom.menu.UploadSpeed.256000.windows=256000
|
|
uPesy_wroom.menu.UploadSpeed.256000.upload.speed=256000
|
|
uPesy_wroom.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
uPesy_wroom.menu.UploadSpeed.230400=230400
|
|
uPesy_wroom.menu.UploadSpeed.230400.upload.speed=230400
|
|
uPesy_wroom.menu.UploadSpeed.115200=115200
|
|
uPesy_wroom.menu.UploadSpeed.115200.upload.speed=115200
|
|
|
|
uPesy_wroom.menu.FlashMode.qio=QIO
|
|
uPesy_wroom.menu.FlashMode.qio.build.flash_mode=dio
|
|
uPesy_wroom.menu.FlashMode.qio.build.boot=qio
|
|
uPesy_wroom.menu.FlashMode.dio=DIO
|
|
uPesy_wroom.menu.FlashMode.dio.build.flash_mode=dio
|
|
uPesy_wroom.menu.FlashMode.dio.build.boot=dio
|
|
|
|
uPesy_wroom.menu.FlashFreq.80=80MHz
|
|
uPesy_wroom.menu.FlashFreq.80.build.flash_freq=80m
|
|
uPesy_wroom.menu.FlashFreq.40=40MHz
|
|
uPesy_wroom.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
uPesy_wroom.menu.DebugLevel.none=None
|
|
uPesy_wroom.menu.DebugLevel.none.build.code_debug=0
|
|
uPesy_wroom.menu.DebugLevel.error=Error
|
|
uPesy_wroom.menu.DebugLevel.error.build.code_debug=1
|
|
uPesy_wroom.menu.DebugLevel.warn=Warn
|
|
uPesy_wroom.menu.DebugLevel.warn.build.code_debug=2
|
|
uPesy_wroom.menu.DebugLevel.info=Info
|
|
uPesy_wroom.menu.DebugLevel.info.build.code_debug=3
|
|
uPesy_wroom.menu.DebugLevel.debug=Debug
|
|
uPesy_wroom.menu.DebugLevel.debug.build.code_debug=4
|
|
uPesy_wroom.menu.DebugLevel.verbose=Verbose
|
|
uPesy_wroom.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
uPesy_wroom.menu.EraseFlash.none=Disabled
|
|
uPesy_wroom.menu.EraseFlash.none.upload.erase_cmd=
|
|
uPesy_wroom.menu.EraseFlash.all=Enabled
|
|
uPesy_wroom.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
uPesy_edu_esp32.name=uPesy EDU ESP32
|
|
|
|
uPesy_edu_esp32.bootloader.tool=esptool_py
|
|
uPesy_edu_esp32.bootloader.tool.default=esptool_py
|
|
|
|
uPesy_edu_esp32.upload.tool=esptool_py
|
|
uPesy_edu_esp32.upload.tool.default=esptool_py
|
|
uPesy_edu_esp32.upload.tool.network=esp_ota
|
|
|
|
uPesy_edu_esp32.upload.maximum_size=1310720
|
|
uPesy_edu_esp32.upload.maximum_data_size=327680
|
|
uPesy_edu_esp32.upload.flags=
|
|
uPesy_edu_esp32.upload.extra_flags=
|
|
|
|
uPesy_edu_esp32.serial.disableDTR=true
|
|
uPesy_edu_esp32.serial.disableRTS=true
|
|
|
|
uPesy_edu_esp32.build.tarch=xtensa
|
|
uPesy_edu_esp32.build.bootloader_addr=0x1000
|
|
uPesy_edu_esp32.build.target=esp32
|
|
uPesy_edu_esp32.build.mcu=esp32
|
|
uPesy_edu_esp32.build.core=esp32
|
|
uPesy_edu_esp32.build.variant=uPesy_edu_esp32
|
|
uPesy_edu_esp32.build.board=UPESY_EDU_ESP32
|
|
|
|
uPesy_edu_esp32.build.f_cpu=240000000L
|
|
uPesy_edu_esp32.build.flash_size=4MB
|
|
uPesy_edu_esp32.build.flash_freq=80m
|
|
uPesy_edu_esp32.build.flash_mode=dio
|
|
uPesy_edu_esp32.build.boot=dio
|
|
uPesy_edu_esp32.build.partitions=default
|
|
uPesy_edu_esp32.build.defines=
|
|
|
|
uPesy_edu_esp32.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
uPesy_edu_esp32.menu.PartitionScheme.default.build.partitions=default
|
|
uPesy_edu_esp32.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
uPesy_edu_esp32.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
uPesy_edu_esp32.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
uPesy_edu_esp32.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
uPesy_edu_esp32.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
uPesy_edu_esp32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
uPesy_edu_esp32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
uPesy_edu_esp32.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
uPesy_edu_esp32.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
uPesy_edu_esp32.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
uPesy_edu_esp32.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
uPesy_edu_esp32.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
uPesy_edu_esp32.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
uPesy_edu_esp32.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
uPesy_edu_esp32.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
uPesy_edu_esp32.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
uPesy_edu_esp32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
uPesy_edu_esp32.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
uPesy_edu_esp32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
uPesy_edu_esp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
uPesy_edu_esp32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
uPesy_edu_esp32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
uPesy_edu_esp32.menu.CPUFreq.240=240MHz
|
|
uPesy_edu_esp32.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
uPesy_edu_esp32.menu.CPUFreq.160=160MHz
|
|
uPesy_edu_esp32.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
|
|
uPesy_edu_esp32.menu.UploadSpeed.921600=921600
|
|
uPesy_edu_esp32.menu.UploadSpeed.921600.upload.speed=921600
|
|
uPesy_edu_esp32.menu.UploadSpeed.512000.windows=512000
|
|
uPesy_edu_esp32.menu.UploadSpeed.512000.upload.speed=512000
|
|
uPesy_edu_esp32.menu.UploadSpeed.460800.linux=460800
|
|
uPesy_edu_esp32.menu.UploadSpeed.460800.macosx=460800
|
|
uPesy_edu_esp32.menu.UploadSpeed.460800.upload.speed=460800
|
|
uPesy_edu_esp32.menu.UploadSpeed.256000.windows=256000
|
|
uPesy_edu_esp32.menu.UploadSpeed.256000.upload.speed=256000
|
|
uPesy_edu_esp32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
uPesy_edu_esp32.menu.UploadSpeed.230400=230400
|
|
uPesy_edu_esp32.menu.UploadSpeed.230400.upload.speed=230400
|
|
uPesy_edu_esp32.menu.UploadSpeed.115200=115200
|
|
uPesy_edu_esp32.menu.UploadSpeed.115200.upload.speed=115200
|
|
|
|
uPesy_edu_esp32.menu.FlashMode.qio=QIO
|
|
uPesy_edu_esp32.menu.FlashMode.qio.build.flash_mode=dio
|
|
uPesy_edu_esp32.menu.FlashMode.qio.build.boot=qio
|
|
uPesy_edu_esp32.menu.FlashMode.dio=DIO
|
|
uPesy_edu_esp32.menu.FlashMode.dio.build.flash_mode=dio
|
|
uPesy_edu_esp32.menu.FlashMode.dio.build.boot=dio
|
|
|
|
uPesy_edu_esp32.menu.FlashFreq.80=80MHz
|
|
uPesy_edu_esp32.menu.FlashFreq.80.build.flash_freq=80m
|
|
uPesy_edu_esp32.menu.FlashFreq.40=40MHz
|
|
uPesy_edu_esp32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
uPesy_edu_esp32.menu.DebugLevel.none=None
|
|
uPesy_edu_esp32.menu.DebugLevel.none.build.code_debug=0
|
|
uPesy_edu_esp32.menu.DebugLevel.error=Error
|
|
uPesy_edu_esp32.menu.DebugLevel.error.build.code_debug=1
|
|
uPesy_edu_esp32.menu.DebugLevel.warn=Warn
|
|
uPesy_edu_esp32.menu.DebugLevel.warn.build.code_debug=2
|
|
uPesy_edu_esp32.menu.DebugLevel.info=Info
|
|
uPesy_edu_esp32.menu.DebugLevel.info.build.code_debug=3
|
|
uPesy_edu_esp32.menu.DebugLevel.debug=Debug
|
|
uPesy_edu_esp32.menu.DebugLevel.debug.build.code_debug=4
|
|
uPesy_edu_esp32.menu.DebugLevel.verbose=Verbose
|
|
uPesy_edu_esp32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
uPesy_edu_esp32.menu.EraseFlash.none=Disabled
|
|
uPesy_edu_esp32.menu.EraseFlash.none.upload.erase_cmd=
|
|
uPesy_edu_esp32.menu.EraseFlash.all=Enabled
|
|
uPesy_edu_esp32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
upesy_esp32c3_basic.name=uPesy ESP32C3 Basic
|
|
upesy_esp32c3_basic.vid.0=0x303a
|
|
upesy_esp32c3_basic.pid.0=0x8195
|
|
|
|
upesy_esp32c3_basic.bootloader.tool=esptool_py
|
|
upesy_esp32c3_basic.bootloader.tool.default=esptool_py
|
|
|
|
upesy_esp32c3_basic.upload.tool=esptool_py
|
|
upesy_esp32c3_basic.upload.tool.default=esptool_py
|
|
upesy_esp32c3_basic.upload.tool.network=esp_ota
|
|
|
|
upesy_esp32c3_basic.upload.maximum_size=1310720
|
|
upesy_esp32c3_basic.upload.maximum_data_size=327680
|
|
upesy_esp32c3_basic.upload.flags=
|
|
upesy_esp32c3_basic.upload.extra_flags=
|
|
upesy_esp32c3_basic.upload.use_1200bps_touch=false
|
|
upesy_esp32c3_basic.upload.wait_for_upload_port=false
|
|
|
|
upesy_esp32c3_basic.serial.disableDTR=true
|
|
upesy_esp32c3_basic.serial.disableRTS=true
|
|
|
|
upesy_esp32c3_basic.build.tarch=riscv32
|
|
upesy_esp32c3_basic.build.target=esp
|
|
upesy_esp32c3_basic.build.mcu=esp32c3
|
|
upesy_esp32c3_basic.build.core=esp32
|
|
upesy_esp32c3_basic.build.variant=uPesy_esp32c3_basic
|
|
upesy_esp32c3_basic.build.board=UPESY_ESP32C3_BASIC
|
|
upesy_esp32c3_basic.build.bootloader_addr=0x0
|
|
|
|
upesy_esp32c3_basic.build.cdc_on_boot=1
|
|
upesy_esp32c3_basic.build.f_cpu=160000000L
|
|
upesy_esp32c3_basic.build.flash_size=4MB
|
|
upesy_esp32c3_basic.build.flash_freq=80m
|
|
upesy_esp32c3_basic.build.flash_mode=dio
|
|
upesy_esp32c3_basic.build.boot=qio
|
|
upesy_esp32c3_basic.build.partitions=default
|
|
upesy_esp32c3_basic.build.defines=
|
|
|
|
upesy_esp32c3_basic.menu.CDCOnBoot.default=Enabled
|
|
upesy_esp32c3_basic.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
upesy_esp32c3_basic.menu.CDCOnBoot.dis_cdc=Disabled
|
|
upesy_esp32c3_basic.menu.CDCOnBoot.dis_cdc.build.cdc_on_boot=0
|
|
|
|
upesy_esp32c3_basic.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
upesy_esp32c3_basic.menu.PartitionScheme.default.build.partitions=default
|
|
upesy_esp32c3_basic.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
upesy_esp32c3_basic.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
upesy_esp32c3_basic.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
upesy_esp32c3_basic.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
upesy_esp32c3_basic.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
upesy_esp32c3_basic.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
upesy_esp32c3_basic.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
upesy_esp32c3_basic.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
upesy_esp32c3_basic.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
upesy_esp32c3_basic.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
upesy_esp32c3_basic.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
upesy_esp32c3_basic.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
upesy_esp32c3_basic.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
upesy_esp32c3_basic.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
upesy_esp32c3_basic.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
upesy_esp32c3_basic.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
upesy_esp32c3_basic.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
|
|
upesy_esp32c3_basic.menu.CPUFreq.160=160MHz (WiFi)
|
|
upesy_esp32c3_basic.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
upesy_esp32c3_basic.menu.CPUFreq.80=80MHz (WiFi)
|
|
upesy_esp32c3_basic.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
upesy_esp32c3_basic.menu.CPUFreq.40=40MHz
|
|
upesy_esp32c3_basic.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
upesy_esp32c3_basic.menu.CPUFreq.20=20MHz
|
|
upesy_esp32c3_basic.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
upesy_esp32c3_basic.menu.CPUFreq.10=10MHz
|
|
upesy_esp32c3_basic.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
upesy_esp32c3_basic.menu.FlashFreq.80=80MHz
|
|
upesy_esp32c3_basic.menu.FlashFreq.80.build.flash_freq=80m
|
|
upesy_esp32c3_basic.menu.FlashFreq.40=40MHz
|
|
upesy_esp32c3_basic.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
upesy_esp32c3_basic.menu.UploadSpeed.921600=921600
|
|
upesy_esp32c3_basic.menu.UploadSpeed.921600.upload.speed=921600
|
|
upesy_esp32c3_basic.menu.UploadSpeed.115200=115200
|
|
upesy_esp32c3_basic.menu.UploadSpeed.115200.upload.speed=115200
|
|
upesy_esp32c3_basic.menu.UploadSpeed.256000.windows=256000
|
|
upesy_esp32c3_basic.menu.UploadSpeed.256000.upload.speed=256000
|
|
upesy_esp32c3_basic.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
upesy_esp32c3_basic.menu.UploadSpeed.230400=230400
|
|
upesy_esp32c3_basic.menu.UploadSpeed.230400.upload.speed=230400
|
|
upesy_esp32c3_basic.menu.UploadSpeed.460800.linux=460800
|
|
upesy_esp32c3_basic.menu.UploadSpeed.460800.macosx=460800
|
|
upesy_esp32c3_basic.menu.UploadSpeed.460800.upload.speed=460800
|
|
upesy_esp32c3_basic.menu.UploadSpeed.512000.windows=512000
|
|
upesy_esp32c3_basic.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
upesy_esp32c3_basic.menu.DebugLevel.none=None
|
|
upesy_esp32c3_basic.menu.DebugLevel.none.build.code_debug=0
|
|
upesy_esp32c3_basic.menu.DebugLevel.error=Error
|
|
upesy_esp32c3_basic.menu.DebugLevel.error.build.code_debug=1
|
|
upesy_esp32c3_basic.menu.DebugLevel.warn=Warn
|
|
upesy_esp32c3_basic.menu.DebugLevel.warn.build.code_debug=2
|
|
upesy_esp32c3_basic.menu.DebugLevel.info=Info
|
|
upesy_esp32c3_basic.menu.DebugLevel.info.build.code_debug=3
|
|
upesy_esp32c3_basic.menu.DebugLevel.debug=Debug
|
|
upesy_esp32c3_basic.menu.DebugLevel.debug.build.code_debug=4
|
|
upesy_esp32c3_basic.menu.DebugLevel.verbose=Verbose
|
|
upesy_esp32c3_basic.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
upesy_esp32c3_basic.menu.EraseFlash.none=Disabled
|
|
upesy_esp32c3_basic.menu.EraseFlash.none.upload.erase_cmd=
|
|
upesy_esp32c3_basic.menu.EraseFlash.all=Enabled
|
|
upesy_esp32c3_basic.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
upesy_esp32c3_mini.name=uPesy ESP32C3 Mini
|
|
upesy_esp32c3_mini.vid.0=0x303a
|
|
upesy_esp32c3_mini.pid.0=0x819B
|
|
|
|
upesy_esp32c3_mini.bootloader.tool=esptool_py
|
|
upesy_esp32c3_mini.bootloader.tool.default=esptool_py
|
|
|
|
upesy_esp32c3_mini.upload.tool=esptool_py
|
|
upesy_esp32c3_mini.upload.tool.default=esptool_py
|
|
upesy_esp32c3_mini.upload.tool.network=esp_ota
|
|
|
|
upesy_esp32c3_mini.upload.maximum_size=1310720
|
|
upesy_esp32c3_mini.upload.maximum_data_size=327680
|
|
upesy_esp32c3_mini.upload.flags=
|
|
upesy_esp32c3_mini.upload.extra_flags=
|
|
upesy_esp32c3_mini.upload.use_1200bps_touch=false
|
|
upesy_esp32c3_mini.upload.wait_for_upload_port=false
|
|
|
|
upesy_esp32c3_mini.serial.disableDTR=true
|
|
upesy_esp32c3_mini.serial.disableRTS=true
|
|
|
|
upesy_esp32c3_mini.build.tarch=riscv32
|
|
upesy_esp32c3_mini.build.target=esp
|
|
upesy_esp32c3_mini.build.mcu=esp32c3
|
|
upesy_esp32c3_mini.build.core=esp32
|
|
upesy_esp32c3_mini.build.variant=uPesy_esp32c3_mini
|
|
upesy_esp32c3_mini.build.board=UPESY_ESP32C3_MINI
|
|
upesy_esp32c3_mini.build.bootloader_addr=0x0
|
|
|
|
upesy_esp32c3_mini.build.cdc_on_boot=1
|
|
upesy_esp32c3_mini.build.f_cpu=160000000L
|
|
upesy_esp32c3_mini.build.flash_size=4MB
|
|
upesy_esp32c3_mini.build.flash_freq=80m
|
|
upesy_esp32c3_mini.build.flash_mode=dio
|
|
upesy_esp32c3_mini.build.boot=qio
|
|
upesy_esp32c3_mini.build.partitions=default
|
|
upesy_esp32c3_mini.build.defines=
|
|
|
|
upesy_esp32c3_mini.menu.CDCOnBoot.default=Enabled
|
|
upesy_esp32c3_mini.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
upesy_esp32c3_mini.menu.CDCOnBoot.dis_cdc=Disabled
|
|
upesy_esp32c3_mini.menu.CDCOnBoot.dis_cdc.build.cdc_on_boot=0
|
|
|
|
upesy_esp32c3_mini.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
upesy_esp32c3_mini.menu.PartitionScheme.default.build.partitions=default
|
|
upesy_esp32c3_mini.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
upesy_esp32c3_mini.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
upesy_esp32c3_mini.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
upesy_esp32c3_mini.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
upesy_esp32c3_mini.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
upesy_esp32c3_mini.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
upesy_esp32c3_mini.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
upesy_esp32c3_mini.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
upesy_esp32c3_mini.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
upesy_esp32c3_mini.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
upesy_esp32c3_mini.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
upesy_esp32c3_mini.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
upesy_esp32c3_mini.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
upesy_esp32c3_mini.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
upesy_esp32c3_mini.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
upesy_esp32c3_mini.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
upesy_esp32c3_mini.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
|
|
upesy_esp32c3_mini.menu.CPUFreq.160=160MHz (WiFi)
|
|
upesy_esp32c3_mini.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
upesy_esp32c3_mini.menu.CPUFreq.80=80MHz (WiFi)
|
|
upesy_esp32c3_mini.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
upesy_esp32c3_mini.menu.CPUFreq.40=40MHz
|
|
upesy_esp32c3_mini.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
upesy_esp32c3_mini.menu.CPUFreq.20=20MHz
|
|
upesy_esp32c3_mini.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
upesy_esp32c3_mini.menu.CPUFreq.10=10MHz
|
|
upesy_esp32c3_mini.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
upesy_esp32c3_mini.menu.FlashFreq.80=80MHz
|
|
upesy_esp32c3_mini.menu.FlashFreq.80.build.flash_freq=80m
|
|
upesy_esp32c3_mini.menu.FlashFreq.40=40MHz
|
|
upesy_esp32c3_mini.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
upesy_esp32c3_mini.menu.UploadSpeed.921600=921600
|
|
upesy_esp32c3_mini.menu.UploadSpeed.921600.upload.speed=921600
|
|
upesy_esp32c3_mini.menu.UploadSpeed.115200=115200
|
|
upesy_esp32c3_mini.menu.UploadSpeed.115200.upload.speed=115200
|
|
upesy_esp32c3_mini.menu.UploadSpeed.256000.windows=256000
|
|
upesy_esp32c3_mini.menu.UploadSpeed.256000.upload.speed=256000
|
|
upesy_esp32c3_mini.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
upesy_esp32c3_mini.menu.UploadSpeed.230400=230400
|
|
upesy_esp32c3_mini.menu.UploadSpeed.230400.upload.speed=230400
|
|
upesy_esp32c3_mini.menu.UploadSpeed.460800.linux=460800
|
|
upesy_esp32c3_mini.menu.UploadSpeed.460800.macosx=460800
|
|
upesy_esp32c3_mini.menu.UploadSpeed.460800.upload.speed=460800
|
|
upesy_esp32c3_mini.menu.UploadSpeed.512000.windows=512000
|
|
upesy_esp32c3_mini.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
upesy_esp32c3_mini.menu.DebugLevel.none=None
|
|
upesy_esp32c3_mini.menu.DebugLevel.none.build.code_debug=0
|
|
upesy_esp32c3_mini.menu.DebugLevel.error=Error
|
|
upesy_esp32c3_mini.menu.DebugLevel.error.build.code_debug=1
|
|
upesy_esp32c3_mini.menu.DebugLevel.warn=Warn
|
|
upesy_esp32c3_mini.menu.DebugLevel.warn.build.code_debug=2
|
|
upesy_esp32c3_mini.menu.DebugLevel.info=Info
|
|
upesy_esp32c3_mini.menu.DebugLevel.info.build.code_debug=3
|
|
upesy_esp32c3_mini.menu.DebugLevel.debug=Debug
|
|
upesy_esp32c3_mini.menu.DebugLevel.debug.build.code_debug=4
|
|
upesy_esp32c3_mini.menu.DebugLevel.verbose=Verbose
|
|
upesy_esp32c3_mini.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
upesy_esp32c3_mini.menu.EraseFlash.none=Disabled
|
|
upesy_esp32c3_mini.menu.EraseFlash.none.upload.erase_cmd=
|
|
upesy_esp32c3_mini.menu.EraseFlash.all=Enabled
|
|
upesy_esp32c3_mini.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
upesy_esp32s3_basic.name=uPesy ESP32S3 Basic
|
|
upesy_esp32s3_basic.vid.0=0x303a
|
|
upesy_esp32s3_basic.pid.0=0x8192
|
|
|
|
upesy_esp32s3_basic.bootloader.tool=esptool_py
|
|
upesy_esp32s3_basic.bootloader.tool.default=esptool_py
|
|
|
|
upesy_esp32s3_basic.upload.tool=esptool_py
|
|
upesy_esp32s3_basic.upload.tool.default=esptool_py
|
|
upesy_esp32s3_basic.upload.tool.network=esp_ota
|
|
|
|
upesy_esp32s3_basic.upload.maximum_size=1310720
|
|
upesy_esp32s3_basic.upload.maximum_data_size=327680
|
|
upesy_esp32s3_basic.upload.flags=
|
|
upesy_esp32s3_basic.upload.extra_flags=
|
|
upesy_esp32s3_basic.upload.use_1200bps_touch=false
|
|
upesy_esp32s3_basic.upload.wait_for_upload_port=false
|
|
|
|
upesy_esp32s3_basic.serial.disableDTR=false
|
|
upesy_esp32s3_basic.serial.disableRTS=false
|
|
|
|
upesy_esp32s3_basic.build.tarch=xtensa
|
|
upesy_esp32s3_basic.build.bootloader_addr=0x0
|
|
upesy_esp32s3_basic.build.target=esp32s3
|
|
upesy_esp32s3_basic.build.mcu=esp32s3
|
|
upesy_esp32s3_basic.build.core=esp32
|
|
upesy_esp32s3_basic.build.variant=uPesy_esp32s3_basic
|
|
upesy_esp32s3_basic.build.board=UPESY_ESP32S3_BASIC
|
|
|
|
upesy_esp32s3_basic.build.usb_mode=1
|
|
upesy_esp32s3_basic.build.cdc_on_boot=0
|
|
upesy_esp32s3_basic.build.msc_on_boot=0
|
|
upesy_esp32s3_basic.build.dfu_on_boot=0
|
|
upesy_esp32s3_basic.build.f_cpu=240000000L
|
|
upesy_esp32s3_basic.build.flash_size=16MB
|
|
upesy_esp32s3_basic.build.flash_freq=80m
|
|
upesy_esp32s3_basic.build.flash_mode=dio
|
|
upesy_esp32s3_basic.build.boot=qio
|
|
upesy_esp32s3_basic.build.boot_freq=80m
|
|
upesy_esp32s3_basic.build.partitions=default
|
|
upesy_esp32s3_basic.build.defines=-DBOARD_HAS_PSRAM
|
|
upesy_esp32s3_basic.build.loop_core=
|
|
upesy_esp32s3_basic.build.event_core=
|
|
upesy_esp32s3_basic.build.psram_type=opi
|
|
upesy_esp32s3_basic.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
upesy_esp32s3_basic.menu.JTAGAdapter.default=Disabled
|
|
upesy_esp32s3_basic.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
upesy_esp32s3_basic.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
upesy_esp32s3_basic.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
upesy_esp32s3_basic.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
upesy_esp32s3_basic.menu.JTAGAdapter.external=FTDI Adapter
|
|
upesy_esp32s3_basic.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
upesy_esp32s3_basic.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
upesy_esp32s3_basic.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
upesy_esp32s3_basic.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
upesy_esp32s3_basic.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
upesy_esp32s3_basic.menu.FlashMode.qio=QIO 80MHz
|
|
upesy_esp32s3_basic.menu.FlashMode.qio.build.flash_mode=dio
|
|
upesy_esp32s3_basic.menu.FlashMode.qio.build.boot=qio
|
|
upesy_esp32s3_basic.menu.FlashMode.qio.build.boot_freq=80m
|
|
upesy_esp32s3_basic.menu.FlashMode.qio.build.flash_freq=80m
|
|
upesy_esp32s3_basic.menu.FlashMode.qio120=QIO 120MHz
|
|
upesy_esp32s3_basic.menu.FlashMode.qio120.build.flash_mode=dio
|
|
upesy_esp32s3_basic.menu.FlashMode.qio120.build.boot=qio
|
|
upesy_esp32s3_basic.menu.FlashMode.qio120.build.boot_freq=120m
|
|
upesy_esp32s3_basic.menu.FlashMode.qio120.build.flash_freq=80m
|
|
|
|
upesy_esp32s3_basic.menu.LoopCore.1=Core 1
|
|
upesy_esp32s3_basic.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
upesy_esp32s3_basic.menu.LoopCore.0=Core 0
|
|
upesy_esp32s3_basic.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
upesy_esp32s3_basic.menu.EventsCore.1=Core 1
|
|
upesy_esp32s3_basic.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
upesy_esp32s3_basic.menu.EventsCore.0=Core 0
|
|
upesy_esp32s3_basic.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
upesy_esp32s3_basic.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
upesy_esp32s3_basic.menu.USBMode.hwcdc.build.usb_mode=1
|
|
upesy_esp32s3_basic.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
upesy_esp32s3_basic.menu.USBMode.default.build.usb_mode=0
|
|
|
|
upesy_esp32s3_basic.menu.CDCOnBoot.default=Disabled
|
|
upesy_esp32s3_basic.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
upesy_esp32s3_basic.menu.CDCOnBoot.cdc=Enabled
|
|
upesy_esp32s3_basic.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
upesy_esp32s3_basic.menu.MSCOnBoot.default=Disabled
|
|
upesy_esp32s3_basic.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
upesy_esp32s3_basic.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
upesy_esp32s3_basic.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
upesy_esp32s3_basic.menu.DFUOnBoot.default=Disabled
|
|
upesy_esp32s3_basic.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
upesy_esp32s3_basic.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
upesy_esp32s3_basic.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
upesy_esp32s3_basic.menu.UploadMode.default=UART0 / Hardware CDC
|
|
upesy_esp32s3_basic.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
upesy_esp32s3_basic.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
upesy_esp32s3_basic.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
upesy_esp32s3_basic.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
upesy_esp32s3_basic.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
upesy_esp32s3_basic.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
upesy_esp32s3_basic.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
upesy_esp32s3_basic.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
upesy_esp32s3_basic.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
upesy_esp32s3_basic.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
upesy_esp32s3_basic.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
|
|
upesy_esp32s3_basic.menu.CPUFreq.240=240MHz (WiFi)
|
|
upesy_esp32s3_basic.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
upesy_esp32s3_basic.menu.CPUFreq.160=160MHz (WiFi)
|
|
upesy_esp32s3_basic.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
upesy_esp32s3_basic.menu.CPUFreq.80=80MHz (WiFi)
|
|
upesy_esp32s3_basic.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
upesy_esp32s3_basic.menu.CPUFreq.40=40MHz
|
|
upesy_esp32s3_basic.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
upesy_esp32s3_basic.menu.CPUFreq.20=20MHz
|
|
upesy_esp32s3_basic.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
upesy_esp32s3_basic.menu.CPUFreq.10=10MHz
|
|
upesy_esp32s3_basic.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
upesy_esp32s3_basic.menu.UploadSpeed.921600=921600
|
|
upesy_esp32s3_basic.menu.UploadSpeed.921600.upload.speed=921600
|
|
upesy_esp32s3_basic.menu.UploadSpeed.115200=115200
|
|
upesy_esp32s3_basic.menu.UploadSpeed.115200.upload.speed=115200
|
|
upesy_esp32s3_basic.menu.UploadSpeed.256000.windows=256000
|
|
upesy_esp32s3_basic.menu.UploadSpeed.256000.upload.speed=256000
|
|
upesy_esp32s3_basic.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
upesy_esp32s3_basic.menu.UploadSpeed.230400=230400
|
|
upesy_esp32s3_basic.menu.UploadSpeed.230400.upload.speed=230400
|
|
upesy_esp32s3_basic.menu.UploadSpeed.460800.linux=460800
|
|
upesy_esp32s3_basic.menu.UploadSpeed.460800.macosx=460800
|
|
upesy_esp32s3_basic.menu.UploadSpeed.460800.upload.speed=460800
|
|
upesy_esp32s3_basic.menu.UploadSpeed.512000.windows=512000
|
|
upesy_esp32s3_basic.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
upesy_esp32s3_basic.menu.DebugLevel.none=None
|
|
upesy_esp32s3_basic.menu.DebugLevel.none.build.code_debug=0
|
|
upesy_esp32s3_basic.menu.DebugLevel.error=Error
|
|
upesy_esp32s3_basic.menu.DebugLevel.error.build.code_debug=1
|
|
upesy_esp32s3_basic.menu.DebugLevel.warn=Warn
|
|
upesy_esp32s3_basic.menu.DebugLevel.warn.build.code_debug=2
|
|
upesy_esp32s3_basic.menu.DebugLevel.info=Info
|
|
upesy_esp32s3_basic.menu.DebugLevel.info.build.code_debug=3
|
|
upesy_esp32s3_basic.menu.DebugLevel.debug=Debug
|
|
upesy_esp32s3_basic.menu.DebugLevel.debug.build.code_debug=4
|
|
upesy_esp32s3_basic.menu.DebugLevel.verbose=Verbose
|
|
upesy_esp32s3_basic.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
upesy_esp32s3_basic.menu.EraseFlash.none=Disabled
|
|
upesy_esp32s3_basic.menu.EraseFlash.none.upload.erase_cmd=
|
|
upesy_esp32s3_basic.menu.EraseFlash.all=Enabled
|
|
upesy_esp32s3_basic.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
kb32.name=KB32-FT
|
|
|
|
kb32.bootloader.tool=esptool_py
|
|
kb32.bootloader.tool.default=esptool_py
|
|
|
|
kb32.upload.tool=esptool_py
|
|
kb32.upload.tool.default=esptool_py
|
|
kb32.upload.tool.network=esp_ota
|
|
|
|
kb32.upload.maximum_size=1310720
|
|
kb32.upload.maximum_data_size=327680
|
|
kb32.upload.flags=
|
|
kb32.upload.extra_flags=
|
|
|
|
kb32.serial.disableDTR=true
|
|
kb32.serial.disableRTS=true
|
|
|
|
kb32.build.tarch=xtensa
|
|
kb32.build.bootloader_addr=0x1000
|
|
kb32.build.target=esp32
|
|
kb32.build.mcu=esp32
|
|
kb32.build.core=esp32
|
|
kb32.build.variant=esp32
|
|
kb32.build.board=ESP32_DEV
|
|
|
|
kb32.build.f_cpu=240000000L
|
|
kb32.build.flash_size=4MB
|
|
kb32.build.flash_freq=40m
|
|
kb32.build.flash_mode=dio
|
|
kb32.build.boot=dio
|
|
kb32.build.partitions=default
|
|
kb32.build.defines=
|
|
kb32.build.loop_core=
|
|
kb32.build.event_core=
|
|
|
|
kb32.menu.PSRAM.disabled=Disabled
|
|
kb32.menu.PSRAM.disabled.build.defines=
|
|
kb32.menu.PSRAM.disabled.build.extra_libs=
|
|
kb32.menu.PSRAM.enabled=Enabled
|
|
kb32.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
kb32.menu.PSRAM.enabled.build.extra_libs=
|
|
|
|
kb32.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
kb32.menu.PartitionScheme.default.build.partitions=default
|
|
kb32.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
kb32.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
kb32.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
kb32.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
kb32.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
kb32.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
kb32.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
kb32.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
kb32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
kb32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
kb32.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
kb32.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
kb32.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
kb32.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
kb32.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
kb32.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
kb32.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
kb32.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
kb32.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
kb32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
kb32.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
kb32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
kb32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
kb32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
kb32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
kb32.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
kb32.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
kb32.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
kb32.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
kb32.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
kb32.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
kb32.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
kb32.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
kb32.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
kb32.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
kb32.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
kb32.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
kb32.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
kb32.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
kb32.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
kb32.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
kb32.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
kb32.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
kb32.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
kb32.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
kb32.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
kb32.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
kb32.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
kb32.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
kb32.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
kb32.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
kb32.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
kb32.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
kb32.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
kb32.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
kb32.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
kb32.menu.FlashMode.qio=QIO
|
|
kb32.menu.FlashMode.qio.build.flash_mode=dio
|
|
kb32.menu.FlashMode.qio.build.boot=qio
|
|
kb32.menu.FlashMode.dio=DIO
|
|
kb32.menu.FlashMode.dio.build.flash_mode=dio
|
|
kb32.menu.FlashMode.dio.build.boot=dio
|
|
|
|
kb32.menu.FlashFreq.80=80MHz
|
|
kb32.menu.FlashFreq.80.build.flash_freq=80m
|
|
kb32.menu.FlashFreq.40=40MHz
|
|
kb32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
kb32.menu.FlashSize.4M=4MB (32Mb)
|
|
kb32.menu.FlashSize.4M.build.flash_size=4MB
|
|
kb32.menu.FlashSize.8M=8MB (64Mb)
|
|
kb32.menu.FlashSize.8M.build.flash_size=8MB
|
|
kb32.menu.FlashSize.8M.build.partitions=default_8MB
|
|
kb32.menu.FlashSize.2M=2MB (16Mb)
|
|
kb32.menu.FlashSize.2M.build.flash_size=2MB
|
|
kb32.menu.FlashSize.2M.build.partitions=minimal
|
|
kb32.menu.FlashSize.16M=16MB (128Mb)
|
|
kb32.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
kb32.menu.UploadSpeed.921600=921600
|
|
kb32.menu.UploadSpeed.921600.upload.speed=921600
|
|
kb32.menu.UploadSpeed.115200=115200
|
|
kb32.menu.UploadSpeed.115200.upload.speed=115200
|
|
kb32.menu.UploadSpeed.256000.windows=256000
|
|
kb32.menu.UploadSpeed.256000.upload.speed=256000
|
|
kb32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
kb32.menu.UploadSpeed.230400=230400
|
|
kb32.menu.UploadSpeed.230400.upload.speed=230400
|
|
kb32.menu.UploadSpeed.460800.linux=460800
|
|
kb32.menu.UploadSpeed.460800.macosx=460800
|
|
kb32.menu.UploadSpeed.460800.upload.speed=460800
|
|
kb32.menu.UploadSpeed.512000.windows=512000
|
|
kb32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
kb32.menu.LoopCore.1=Core 1
|
|
kb32.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
kb32.menu.LoopCore.0=Core 0
|
|
kb32.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
kb32.menu.EventsCore.1=Core 1
|
|
kb32.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
kb32.menu.EventsCore.0=Core 0
|
|
kb32.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
kb32.menu.DebugLevel.none=None
|
|
kb32.menu.DebugLevel.none.build.code_debug=0
|
|
kb32.menu.DebugLevel.error=Error
|
|
kb32.menu.DebugLevel.error.build.code_debug=1
|
|
kb32.menu.DebugLevel.warn=Warn
|
|
kb32.menu.DebugLevel.warn.build.code_debug=2
|
|
kb32.menu.DebugLevel.info=Info
|
|
kb32.menu.DebugLevel.info.build.code_debug=3
|
|
kb32.menu.DebugLevel.debug=Debug
|
|
kb32.menu.DebugLevel.debug.build.code_debug=4
|
|
kb32.menu.DebugLevel.verbose=Verbose
|
|
kb32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
kb32.menu.EraseFlash.none=Disabled
|
|
kb32.menu.EraseFlash.none.upload.erase_cmd=
|
|
kb32.menu.EraseFlash.all=Enabled
|
|
kb32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
deneyapkart.name=Deneyap Kart
|
|
|
|
deneyapkart.bootloader.tool=esptool_py
|
|
deneyapkart.bootloader.tool.default=esptool_py
|
|
|
|
deneyapkart.upload.tool=esptool_py
|
|
deneyapkart.upload.tool.default=esptool_py
|
|
deneyapkart.upload.tool.network=esp_ota
|
|
|
|
deneyapkart.upload.maximum_size=1310720
|
|
deneyapkart.upload.maximum_data_size=327680
|
|
deneyapkart.upload.flags=
|
|
deneyapkart.upload.extra_flags=
|
|
|
|
deneyapkart.serial.disableDTR=true
|
|
deneyapkart.serial.disableRTS=true
|
|
|
|
deneyapkart.build.tarch=xtensa
|
|
deneyapkart.build.bootloader_addr=0x1000
|
|
deneyapkart.build.target=esp32
|
|
deneyapkart.build.mcu=esp32
|
|
deneyapkart.build.core=esp32
|
|
deneyapkart.build.variant=deneyapkart
|
|
deneyapkart.build.board=DYDK
|
|
|
|
deneyapkart.build.f_cpu=240000000L
|
|
deneyapkart.build.flash_size=4MB
|
|
deneyapkart.build.flash_freq=80m
|
|
deneyapkart.build.flash_mode=dio
|
|
deneyapkart.build.boot=qio
|
|
deneyapkart.build.partitions=default
|
|
deneyapkart.build.defines=
|
|
deneyapkart.build.loop_core=
|
|
deneyapkart.build.event_core=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
deneyapkart.menu.JTAGAdapter.default=Disabled
|
|
deneyapkart.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
deneyapkart.menu.JTAGAdapter.external=FTDI Adapter
|
|
deneyapkart.menu.JTAGAdapter.external.build.openocdscript=esp32-wrover-kit-3.3v.cfg
|
|
deneyapkart.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
deneyapkart.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
deneyapkart.menu.JTAGAdapter.bridge.build.openocdscript=esp32-bridge.cfg
|
|
deneyapkart.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
deneyapkart.menu.PSRAM.enabled=Enabled
|
|
deneyapkart.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
deneyapkart.menu.PSRAM.enabled.build.extra_libs=
|
|
deneyapkart.menu.PSRAM.disabled=Disabled
|
|
deneyapkart.menu.PSRAM.disabled.build.defines=
|
|
deneyapkart.menu.PSRAM.disabled.build.extra_libs=
|
|
|
|
deneyapkart.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
deneyapkart.menu.PartitionScheme.default.build.partitions=default
|
|
deneyapkart.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
deneyapkart.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
deneyapkart.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
deneyapkart.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
deneyapkart.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
deneyapkart.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
deneyapkart.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
deneyapkart.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
deneyapkart.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
deneyapkart.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
deneyapkart.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
deneyapkart.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
deneyapkart.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
deneyapkart.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
deneyapkart.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
deneyapkart.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
deneyapkart.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
deneyapkart.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
deneyapkart.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
deneyapkart.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
deneyapkart.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
deneyapkart.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
deneyapkart.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
deneyapkart.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
deneyapkart.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
deneyapkart.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
deneyapkart.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
deneyapkart.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
deneyapkart.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
deneyapkart.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
deneyapkart.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
deneyapkart.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
deneyapkart.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
deneyapkart.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
deneyapkart.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
deneyapkart.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
deneyapkart.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
deneyapkart.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
deneyapkart.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
deneyapkart.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
deneyapkart.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
deneyapkart.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
deneyapkart.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
deneyapkart.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
deneyapkart.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
deneyapkart.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
deneyapkart.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
deneyapkart.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
deneyapkart.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
deneyapkart.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
deneyapkart.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
deneyapkart.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
deneyapkart.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
deneyapkart.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
deneyapkart.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
deneyapkart.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
deneyapkart.menu.FlashMode.qio=QIO
|
|
deneyapkart.menu.FlashMode.qio.build.flash_mode=dio
|
|
deneyapkart.menu.FlashMode.qio.build.boot=qio
|
|
deneyapkart.menu.FlashMode.dio=DIO
|
|
deneyapkart.menu.FlashMode.dio.build.flash_mode=dio
|
|
deneyapkart.menu.FlashMode.dio.build.boot=dio
|
|
|
|
deneyapkart.menu.FlashFreq.80=80MHz
|
|
deneyapkart.menu.FlashFreq.80.build.flash_freq=80m
|
|
deneyapkart.menu.FlashFreq.40=40MHz
|
|
deneyapkart.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
deneyapkart.menu.FlashSize.4M=4MB (32Mb)
|
|
deneyapkart.menu.FlashSize.4M.build.flash_size=4MB
|
|
deneyapkart.menu.FlashSize.8M=8MB (64Mb)
|
|
deneyapkart.menu.FlashSize.8M.build.flash_size=8MB
|
|
deneyapkart.menu.FlashSize.8M.build.partitions=default_8MB
|
|
deneyapkart.menu.FlashSize.2M=2MB (16Mb)
|
|
deneyapkart.menu.FlashSize.2M.build.flash_size=2MB
|
|
deneyapkart.menu.FlashSize.2M.build.partitions=minimal
|
|
deneyapkart.menu.FlashSize.16M=16MB (128Mb)
|
|
deneyapkart.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
deneyapkart.menu.UploadSpeed.921600=921600
|
|
deneyapkart.menu.UploadSpeed.921600.upload.speed=921600
|
|
deneyapkart.menu.UploadSpeed.115200=115200
|
|
deneyapkart.menu.UploadSpeed.115200.upload.speed=115200
|
|
deneyapkart.menu.UploadSpeed.256000.windows=256000
|
|
deneyapkart.menu.UploadSpeed.256000.upload.speed=256000
|
|
deneyapkart.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
deneyapkart.menu.UploadSpeed.230400=230400
|
|
deneyapkart.menu.UploadSpeed.230400.upload.speed=230400
|
|
deneyapkart.menu.UploadSpeed.460800.linux=460800
|
|
deneyapkart.menu.UploadSpeed.460800.macosx=460800
|
|
deneyapkart.menu.UploadSpeed.460800.upload.speed=460800
|
|
deneyapkart.menu.UploadSpeed.512000.windows=512000
|
|
deneyapkart.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
deneyapkart.menu.LoopCore.1=Core 1
|
|
deneyapkart.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
deneyapkart.menu.LoopCore.0=Core 0
|
|
deneyapkart.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
deneyapkart.menu.EventsCore.1=Core 1
|
|
deneyapkart.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
deneyapkart.menu.EventsCore.0=Core 0
|
|
deneyapkart.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
deneyapkart.menu.DebugLevel.none=None
|
|
deneyapkart.menu.DebugLevel.none.build.code_debug=0
|
|
deneyapkart.menu.DebugLevel.error=Error
|
|
deneyapkart.menu.DebugLevel.error.build.code_debug=1
|
|
deneyapkart.menu.DebugLevel.warn=Warn
|
|
deneyapkart.menu.DebugLevel.warn.build.code_debug=2
|
|
deneyapkart.menu.DebugLevel.info=Info
|
|
deneyapkart.menu.DebugLevel.info.build.code_debug=3
|
|
deneyapkart.menu.DebugLevel.debug=Debug
|
|
deneyapkart.menu.DebugLevel.debug.build.code_debug=4
|
|
deneyapkart.menu.DebugLevel.verbose=Verbose
|
|
deneyapkart.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
deneyapkart.menu.EraseFlash.none=Disabled
|
|
deneyapkart.menu.EraseFlash.none.upload.erase_cmd=
|
|
deneyapkart.menu.EraseFlash.all=Enabled
|
|
deneyapkart.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
deneyapkart1A.name=Deneyap Kart 1A
|
|
|
|
deneyapkart1A.bootloader.tool=esptool_py
|
|
deneyapkart1A.bootloader.tool.default=esptool_py
|
|
|
|
deneyapkart1A.upload.tool=esptool_py
|
|
deneyapkart1A.upload.tool.default=esptool_py
|
|
deneyapkart1A.upload.tool.network=esp_ota
|
|
|
|
deneyapkart1A.upload.maximum_size=1310720
|
|
deneyapkart1A.upload.maximum_data_size=327680
|
|
deneyapkart1A.upload.flags=
|
|
deneyapkart1A.upload.extra_flags=
|
|
|
|
deneyapkart1A.serial.disableDTR=true
|
|
deneyapkart1A.serial.disableRTS=true
|
|
|
|
deneyapkart1A.build.tarch=xtensa
|
|
deneyapkart1A.build.bootloader_addr=0x1000
|
|
deneyapkart1A.build.target=esp32
|
|
deneyapkart1A.build.mcu=esp32
|
|
deneyapkart1A.build.core=esp32
|
|
deneyapkart1A.build.variant=deneyapkart1A
|
|
deneyapkart1A.build.board=DYDK1A
|
|
|
|
deneyapkart1A.build.f_cpu=240000000L
|
|
deneyapkart1A.build.flash_size=4MB
|
|
deneyapkart1A.build.flash_freq=80m
|
|
deneyapkart1A.build.flash_mode=dio
|
|
deneyapkart1A.build.boot=qio
|
|
deneyapkart1A.build.partitions=default
|
|
deneyapkart1A.build.defines=
|
|
deneyapkart1A.build.loop_core=
|
|
deneyapkart1A.build.event_core=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
deneyapkart1A.menu.JTAGAdapter.default=Disabled
|
|
deneyapkart1A.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
deneyapkart1A.menu.JTAGAdapter.external=FTDI Adapter
|
|
deneyapkart1A.menu.JTAGAdapter.external.build.openocdscript=esp32-wrover-kit-3.3v.cfg
|
|
deneyapkart1A.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
deneyapkart1A.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
deneyapkart1A.menu.JTAGAdapter.bridge.build.openocdscript=esp32-bridge.cfg
|
|
deneyapkart1A.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
deneyapkart1A.menu.PSRAM.enabled=Enabled
|
|
deneyapkart1A.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
deneyapkart1A.menu.PSRAM.enabled.build.extra_libs=
|
|
deneyapkart1A.menu.PSRAM.disabled=Disabled
|
|
deneyapkart1A.menu.PSRAM.disabled.build.defines=
|
|
deneyapkart1A.menu.PSRAM.disabled.build.extra_libs=
|
|
|
|
deneyapkart1A.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
deneyapkart1A.menu.PartitionScheme.default.build.partitions=default
|
|
deneyapkart1A.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
deneyapkart1A.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
deneyapkart1A.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
deneyapkart1A.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
deneyapkart1A.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
deneyapkart1A.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
deneyapkart1A.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
deneyapkart1A.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
deneyapkart1A.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
deneyapkart1A.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
deneyapkart1A.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
deneyapkart1A.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
deneyapkart1A.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
deneyapkart1A.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
deneyapkart1A.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
deneyapkart1A.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
deneyapkart1A.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
deneyapkart1A.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
deneyapkart1A.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
deneyapkart1A.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
deneyapkart1A.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
deneyapkart1A.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
deneyapkart1A.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
deneyapkart1A.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
deneyapkart1A.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
deneyapkart1A.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
deneyapkart1A.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
deneyapkart1A.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
deneyapkart1A.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
deneyapkart1A.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
deneyapkart1A.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
deneyapkart1A.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
deneyapkart1A.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
deneyapkart1A.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
deneyapkart1A.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
deneyapkart1A.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
deneyapkart1A.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
deneyapkart1A.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
deneyapkart1A.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
deneyapkart1A.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
deneyapkart1A.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
deneyapkart1A.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
deneyapkart1A.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
deneyapkart1A.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
deneyapkart1A.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
deneyapkart1A.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
deneyapkart1A.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
deneyapkart1A.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
deneyapkart1A.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
deneyapkart1A.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
deneyapkart1A.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
deneyapkart1A.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
deneyapkart1A.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
deneyapkart1A.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
deneyapkart1A.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
deneyapkart1A.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
deneyapkart1A.menu.FlashMode.qio=QIO
|
|
deneyapkart1A.menu.FlashMode.qio.build.flash_mode=dio
|
|
deneyapkart1A.menu.FlashMode.qio.build.boot=qio
|
|
deneyapkart1A.menu.FlashMode.dio=DIO
|
|
deneyapkart1A.menu.FlashMode.dio.build.flash_mode=dio
|
|
deneyapkart1A.menu.FlashMode.dio.build.boot=dio
|
|
|
|
deneyapkart1A.menu.FlashFreq.80=80MHz
|
|
deneyapkart1A.menu.FlashFreq.80.build.flash_freq=80m
|
|
deneyapkart1A.menu.FlashFreq.40=40MHz
|
|
deneyapkart1A.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
deneyapkart1A.menu.FlashSize.4M=4MB (32Mb)
|
|
deneyapkart1A.menu.FlashSize.4M.build.flash_size=4MB
|
|
deneyapkart1A.menu.FlashSize.8M=8MB (64Mb)
|
|
deneyapkart1A.menu.FlashSize.8M.build.flash_size=8MB
|
|
deneyapkart1A.menu.FlashSize.8M.build.partitions=default_8MB
|
|
deneyapkart1A.menu.FlashSize.2M=2MB (16Mb)
|
|
deneyapkart1A.menu.FlashSize.2M.build.flash_size=2MB
|
|
deneyapkart1A.menu.FlashSize.2M.build.partitions=minimal
|
|
deneyapkart1A.menu.FlashSize.16M=16MB (128Mb)
|
|
deneyapkart1A.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
deneyapkart1A.menu.UploadSpeed.921600=921600
|
|
deneyapkart1A.menu.UploadSpeed.921600.upload.speed=921600
|
|
deneyapkart1A.menu.UploadSpeed.115200=115200
|
|
deneyapkart1A.menu.UploadSpeed.115200.upload.speed=115200
|
|
deneyapkart1A.menu.UploadSpeed.256000.windows=256000
|
|
deneyapkart1A.menu.UploadSpeed.256000.upload.speed=256000
|
|
deneyapkart1A.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
deneyapkart1A.menu.UploadSpeed.230400=230400
|
|
deneyapkart1A.menu.UploadSpeed.230400.upload.speed=230400
|
|
deneyapkart1A.menu.UploadSpeed.460800.linux=460800
|
|
deneyapkart1A.menu.UploadSpeed.460800.macosx=460800
|
|
deneyapkart1A.menu.UploadSpeed.460800.upload.speed=460800
|
|
deneyapkart1A.menu.UploadSpeed.512000.windows=512000
|
|
deneyapkart1A.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
deneyapkart1A.menu.LoopCore.1=Core 1
|
|
deneyapkart1A.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
deneyapkart1A.menu.LoopCore.0=Core 0
|
|
deneyapkart1A.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
deneyapkart1A.menu.EventsCore.1=Core 1
|
|
deneyapkart1A.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
deneyapkart1A.menu.EventsCore.0=Core 0
|
|
deneyapkart1A.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
deneyapkart1A.menu.DebugLevel.none=None
|
|
deneyapkart1A.menu.DebugLevel.none.build.code_debug=0
|
|
deneyapkart1A.menu.DebugLevel.error=Error
|
|
deneyapkart1A.menu.DebugLevel.error.build.code_debug=1
|
|
deneyapkart1A.menu.DebugLevel.warn=Warn
|
|
deneyapkart1A.menu.DebugLevel.warn.build.code_debug=2
|
|
deneyapkart1A.menu.DebugLevel.info=Info
|
|
deneyapkart1A.menu.DebugLevel.info.build.code_debug=3
|
|
deneyapkart1A.menu.DebugLevel.debug=Debug
|
|
deneyapkart1A.menu.DebugLevel.debug.build.code_debug=4
|
|
deneyapkart1A.menu.DebugLevel.verbose=Verbose
|
|
deneyapkart1A.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
deneyapkart1A.menu.EraseFlash.none=Disabled
|
|
deneyapkart1A.menu.EraseFlash.none.upload.erase_cmd=
|
|
deneyapkart1A.menu.EraseFlash.all=Enabled
|
|
deneyapkart1A.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
deneyapkart1Av2.name=Deneyap Kart 1A v2
|
|
|
|
deneyapkart1Av2.vid.0=0x303a
|
|
deneyapkart1Av2.pid.0=0x8147
|
|
|
|
deneyapkart1Av2.bootloader.tool=esptool_py
|
|
deneyapkart1Av2.bootloader.tool.default=esptool_py
|
|
|
|
deneyapkart1Av2.upload.tool=esptool_py
|
|
deneyapkart1Av2.upload.tool.default=esptool_py
|
|
deneyapkart1Av2.upload.tool.network=esp_ota
|
|
|
|
deneyapkart1Av2.upload.maximum_size=1310720
|
|
deneyapkart1Av2.upload.maximum_data_size=327680
|
|
deneyapkart1Av2.upload.flags=
|
|
deneyapkart1Av2.upload.extra_flags=
|
|
deneyapkart1Av2.upload.use_1200bps_touch=false
|
|
deneyapkart1Av2.upload.wait_for_upload_port=false
|
|
|
|
deneyapkart1Av2.serial.disableDTR=false
|
|
deneyapkart1Av2.serial.disableRTS=false
|
|
|
|
deneyapkart1Av2.build.tarch=xtensa
|
|
deneyapkart1Av2.build.bootloader_addr=0x0
|
|
deneyapkart1Av2.build.target=esp32s3
|
|
deneyapkart1Av2.build.mcu=esp32s3
|
|
deneyapkart1Av2.build.core=esp32
|
|
deneyapkart1Av2.build.variant=deneyapkart1Av2
|
|
deneyapkart1Av2.build.board=DYDK1Av2
|
|
|
|
deneyapkart1Av2.build.usb_mode=1
|
|
deneyapkart1Av2.build.cdc_on_boot=1
|
|
deneyapkart1Av2.build.msc_on_boot=0
|
|
deneyapkart1Av2.build.dfu_on_boot=0
|
|
deneyapkart1Av2.build.f_cpu=240000000L
|
|
deneyapkart1Av2.build.flash_size=4MB
|
|
deneyapkart1Av2.build.flash_freq=80m
|
|
deneyapkart1Av2.build.flash_mode=dio
|
|
deneyapkart1Av2.build.boot=qio
|
|
deneyapkart1Av2.build.boot_freq=80m
|
|
deneyapkart1Av2.build.partitions=default
|
|
deneyapkart1Av2.build.defines=-DBOARD_HAS_PSRAM
|
|
deneyapkart1Av2.build.loop_core=
|
|
deneyapkart1Av2.build.event_core=
|
|
deneyapkart1Av2.build.psram_type=opi
|
|
deneyapkart1Av2.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
deneyapkart1Av2.menu.JTAGAdapter.default=Disabled
|
|
deneyapkart1Av2.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
deneyapkart1Av2.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
deneyapkart1Av2.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
deneyapkart1Av2.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
deneyapkart1Av2.menu.JTAGAdapter.external=FTDI Adapter
|
|
deneyapkart1Av2.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
deneyapkart1Av2.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
deneyapkart1Av2.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
deneyapkart1Av2.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
deneyapkart1Av2.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
deneyapkart1Av2.menu.PSRAM.opi=OPI PSRAM
|
|
deneyapkart1Av2.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
deneyapkart1Av2.menu.PSRAM.opi.build.psram_type=opi
|
|
deneyapkart1Av2.menu.PSRAM.disabled=Disabled
|
|
deneyapkart1Av2.menu.PSRAM.disabled.build.defines=
|
|
deneyapkart1Av2.menu.PSRAM.disabled.build.psram_type=qspi
|
|
deneyapkart1Av2.menu.PSRAM.enabled=QSPI PSRAM
|
|
deneyapkart1Av2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
deneyapkart1Av2.menu.PSRAM.enabled.build.psram_type=qspi
|
|
|
|
deneyapkart1Av2.menu.FlashMode.qio=QIO 80MHz
|
|
deneyapkart1Av2.menu.FlashMode.qio.build.flash_mode=dio
|
|
deneyapkart1Av2.menu.FlashMode.qio.build.boot=qio
|
|
deneyapkart1Av2.menu.FlashMode.qio.build.boot_freq=80m
|
|
deneyapkart1Av2.menu.FlashMode.qio.build.flash_freq=80m
|
|
deneyapkart1Av2.menu.FlashMode.qio120=QIO 120MHz
|
|
deneyapkart1Av2.menu.FlashMode.qio120.build.flash_mode=dio
|
|
deneyapkart1Av2.menu.FlashMode.qio120.build.boot=qio
|
|
deneyapkart1Av2.menu.FlashMode.qio120.build.boot_freq=120m
|
|
deneyapkart1Av2.menu.FlashMode.qio120.build.flash_freq=80m
|
|
deneyapkart1Av2.menu.FlashMode.dio=DIO 80MHz
|
|
deneyapkart1Av2.menu.FlashMode.dio.build.flash_mode=dio
|
|
deneyapkart1Av2.menu.FlashMode.dio.build.boot=dio
|
|
deneyapkart1Av2.menu.FlashMode.dio.build.boot_freq=80m
|
|
deneyapkart1Av2.menu.FlashMode.dio.build.flash_freq=80m
|
|
deneyapkart1Av2.menu.FlashMode.opi=OPI 80MHz
|
|
deneyapkart1Av2.menu.FlashMode.opi.build.flash_mode=dout
|
|
deneyapkart1Av2.menu.FlashMode.opi.build.boot=opi
|
|
deneyapkart1Av2.menu.FlashMode.opi.build.boot_freq=80m
|
|
deneyapkart1Av2.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
deneyapkart1Av2.menu.FlashSize.4M=4MB (32Mb)
|
|
deneyapkart1Av2.menu.FlashSize.4M.build.flash_size=4MB
|
|
deneyapkart1Av2.menu.FlashSize.8M=8MB (64Mb)
|
|
deneyapkart1Av2.menu.FlashSize.8M.build.flash_size=8MB
|
|
deneyapkart1Av2.menu.FlashSize.8M.build.partitions=default_8MB
|
|
deneyapkart1Av2.menu.FlashSize.16M=16MB (128Mb)
|
|
deneyapkart1Av2.menu.FlashSize.16M.build.flash_size=16MB
|
|
#deneyapkart1Av2.menu.FlashSize.32M=32MB (256Mb)
|
|
#deneyapkart1Av2.menu.FlashSize.32M.build.flash_size=32MB
|
|
|
|
deneyapkart1Av2.menu.LoopCore.1=Core 1
|
|
deneyapkart1Av2.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
deneyapkart1Av2.menu.LoopCore.0=Core 0
|
|
deneyapkart1Av2.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
deneyapkart1Av2.menu.EventsCore.1=Core 1
|
|
deneyapkart1Av2.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
deneyapkart1Av2.menu.EventsCore.0=Core 0
|
|
deneyapkart1Av2.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
deneyapkart1Av2.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
deneyapkart1Av2.menu.USBMode.hwcdc.build.usb_mode=1
|
|
deneyapkart1Av2.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
deneyapkart1Av2.menu.USBMode.default.build.usb_mode=0
|
|
|
|
deneyapkart1Av2.menu.CDCOnBoot.cdc=Enabled
|
|
deneyapkart1Av2.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
deneyapkart1Av2.menu.CDCOnBoot.default=Disabled
|
|
deneyapkart1Av2.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
deneyapkart1Av2.menu.MSCOnBoot.default=Disabled
|
|
deneyapkart1Av2.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
deneyapkart1Av2.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
deneyapkart1Av2.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
deneyapkart1Av2.menu.DFUOnBoot.default=Disabled
|
|
deneyapkart1Av2.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
deneyapkart1Av2.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
deneyapkart1Av2.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
deneyapkart1Av2.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
deneyapkart1Av2.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
deneyapkart1Av2.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
deneyapkart1Av2.menu.UploadMode.default=UART0 / Hardware CDC
|
|
deneyapkart1Av2.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
deneyapkart1Av2.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
deneyapkart1Av2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
deneyapkart1Av2.menu.PartitionScheme.default.build.partitions=default
|
|
deneyapkart1Av2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
deneyapkart1Av2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
deneyapkart1Av2.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
deneyapkart1Av2.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
deneyapkart1Av2.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
deneyapkart1Av2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
deneyapkart1Av2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
deneyapkart1Av2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
deneyapkart1Av2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
deneyapkart1Av2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
deneyapkart1Av2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
deneyapkart1Av2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
deneyapkart1Av2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
deneyapkart1Av2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
deneyapkart1Av2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
deneyapkart1Av2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
deneyapkart1Av2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
deneyapkart1Av2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
deneyapkart1Av2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
deneyapkart1Av2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
deneyapkart1Av2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
deneyapkart1Av2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
deneyapkart1Av2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
deneyapkart1Av2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
deneyapkart1Av2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
deneyapkart1Av2.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
deneyapkart1Av2.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
deneyapkart1Av2.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
deneyapkart1Av2.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
deneyapkart1Av2.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
deneyapkart1Av2.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
deneyapkart1Av2.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
deneyapkart1Av2.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
deneyapkart1Av2.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
deneyapkart1Av2.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
deneyapkart1Av2.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
deneyapkart1Av2.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
deneyapkart1Av2.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
deneyapkart1Av2.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
deneyapkart1Av2.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
deneyapkart1Av2.menu.CPUFreq.240=240MHz (WiFi)
|
|
deneyapkart1Av2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
deneyapkart1Av2.menu.CPUFreq.160=160MHz (WiFi)
|
|
deneyapkart1Av2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
deneyapkart1Av2.menu.CPUFreq.80=80MHz (WiFi)
|
|
deneyapkart1Av2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
deneyapkart1Av2.menu.CPUFreq.40=40MHz
|
|
deneyapkart1Av2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
deneyapkart1Av2.menu.CPUFreq.20=20MHz
|
|
deneyapkart1Av2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
deneyapkart1Av2.menu.CPUFreq.10=10MHz
|
|
deneyapkart1Av2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
deneyapkart1Av2.menu.UploadSpeed.921600=921600
|
|
deneyapkart1Av2.menu.UploadSpeed.921600.upload.speed=921600
|
|
deneyapkart1Av2.menu.UploadSpeed.115200=115200
|
|
deneyapkart1Av2.menu.UploadSpeed.115200.upload.speed=115200
|
|
deneyapkart1Av2.menu.UploadSpeed.256000.windows=256000
|
|
deneyapkart1Av2.menu.UploadSpeed.256000.upload.speed=256000
|
|
deneyapkart1Av2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
deneyapkart1Av2.menu.UploadSpeed.230400=230400
|
|
deneyapkart1Av2.menu.UploadSpeed.230400.upload.speed=230400
|
|
deneyapkart1Av2.menu.UploadSpeed.460800.linux=460800
|
|
deneyapkart1Av2.menu.UploadSpeed.460800.macosx=460800
|
|
deneyapkart1Av2.menu.UploadSpeed.460800.upload.speed=460800
|
|
deneyapkart1Av2.menu.UploadSpeed.512000.windows=512000
|
|
deneyapkart1Av2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
deneyapkart1Av2.menu.DebugLevel.none=None
|
|
deneyapkart1Av2.menu.DebugLevel.none.build.code_debug=0
|
|
deneyapkart1Av2.menu.DebugLevel.error=Error
|
|
deneyapkart1Av2.menu.DebugLevel.error.build.code_debug=1
|
|
deneyapkart1Av2.menu.DebugLevel.warn=Warn
|
|
deneyapkart1Av2.menu.DebugLevel.warn.build.code_debug=2
|
|
deneyapkart1Av2.menu.DebugLevel.info=Info
|
|
deneyapkart1Av2.menu.DebugLevel.info.build.code_debug=3
|
|
deneyapkart1Av2.menu.DebugLevel.debug=Debug
|
|
deneyapkart1Av2.menu.DebugLevel.debug.build.code_debug=4
|
|
deneyapkart1Av2.menu.DebugLevel.verbose=Verbose
|
|
deneyapkart1Av2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
deneyapkart1Av2.menu.EraseFlash.none=Disabled
|
|
deneyapkart1Av2.menu.EraseFlash.none.upload.erase_cmd=
|
|
deneyapkart1Av2.menu.EraseFlash.all=Enabled
|
|
deneyapkart1Av2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
deneyapmini.name=Deneyap Mini
|
|
|
|
deneyapmini.vid.0=0x303a
|
|
deneyapmini.pid.0=0x8141
|
|
|
|
deneyapmini.bootloader.tool=esptool_py
|
|
deneyapmini.bootloader.tool.default=esptool_py
|
|
|
|
deneyapmini.upload.tool=esptool_py
|
|
deneyapmini.upload.tool.default=esptool_py
|
|
deneyapmini.upload.tool.network=esp_ota
|
|
|
|
deneyapmini.upload.maximum_size=1310720
|
|
deneyapmini.upload.maximum_data_size=327680
|
|
deneyapmini.upload.flags=
|
|
deneyapmini.upload.extra_flags=
|
|
deneyapmini.upload.use_1200bps_touch=false
|
|
deneyapmini.upload.wait_for_upload_port=false
|
|
|
|
deneyapmini.serial.disableDTR=false
|
|
deneyapmini.serial.disableRTS=false
|
|
|
|
deneyapmini.build.tarch=xtensa
|
|
deneyapmini.build.bootloader_addr=0x1000
|
|
deneyapmini.build.target=esp32s2
|
|
deneyapmini.build.mcu=esp32s2
|
|
deneyapmini.build.core=esp32
|
|
deneyapmini.build.variant=deneyapmini
|
|
deneyapmini.build.board=DYM
|
|
|
|
deneyapmini.build.cdc_on_boot=1
|
|
deneyapmini.build.msc_on_boot=0
|
|
deneyapmini.build.dfu_on_boot=0
|
|
deneyapmini.build.f_cpu=240000000L
|
|
deneyapmini.build.flash_size=4MB
|
|
deneyapmini.build.flash_freq=80m
|
|
deneyapmini.build.flash_mode=dio
|
|
deneyapmini.build.boot=qio
|
|
deneyapmini.build.partitions=default
|
|
deneyapmini.build.defines=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
deneyapmini.menu.JTAGAdapter.default=Disabled
|
|
deneyapmini.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
deneyapmini.menu.JTAGAdapter.external=FTDI Adapter
|
|
deneyapmini.menu.JTAGAdapter.external.build.openocdscript=esp32s2-kaluga-1.cfg
|
|
deneyapmini.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
deneyapmini.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
deneyapmini.menu.JTAGAdapter.bridge.build.openocdscript=esp32s2-bridge.cfg
|
|
deneyapmini.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
deneyapmini.menu.CDCOnBoot.cdc=Enabled
|
|
deneyapmini.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
deneyapmini.menu.CDCOnBoot.default=Disabled
|
|
deneyapmini.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
deneyapmini.menu.MSCOnBoot.default=Disabled
|
|
deneyapmini.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
deneyapmini.menu.MSCOnBoot.msc=Enabled
|
|
deneyapmini.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
deneyapmini.menu.DFUOnBoot.default=Disabled
|
|
deneyapmini.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
deneyapmini.menu.DFUOnBoot.dfu=Enabled
|
|
deneyapmini.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
deneyapmini.menu.UploadMode.cdc=Internal USB
|
|
deneyapmini.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
deneyapmini.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
deneyapmini.menu.UploadMode.default=UART0
|
|
deneyapmini.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
deneyapmini.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
deneyapmini.menu.PSRAM.disabled=Disabled
|
|
deneyapmini.menu.PSRAM.disabled.build.defines=
|
|
deneyapmini.menu.PSRAM.enabled=Enabled
|
|
deneyapmini.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
|
|
deneyapmini.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
deneyapmini.menu.PartitionScheme.default.build.partitions=default
|
|
deneyapmini.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
deneyapmini.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
deneyapmini.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
deneyapmini.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
deneyapmini.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
deneyapmini.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
deneyapmini.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
deneyapmini.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
deneyapmini.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
deneyapmini.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
deneyapmini.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
deneyapmini.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
deneyapmini.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
deneyapmini.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
deneyapmini.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
deneyapmini.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
deneyapmini.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
deneyapmini.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
deneyapmini.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
deneyapmini.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
deneyapmini.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
deneyapmini.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
deneyapmini.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
deneyapmini.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
deneyapmini.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
deneyapmini.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
deneyapmini.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
deneyapmini.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
deneyapmini.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
deneyapmini.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
deneyapmini.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
deneyapmini.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
deneyapmini.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
deneyapmini.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
deneyapmini.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
deneyapmini.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
deneyapmini.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
deneyapmini.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
deneyapmini.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
deneyapmini.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
deneyapmini.menu.CPUFreq.240=240MHz (WiFi)
|
|
deneyapmini.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
deneyapmini.menu.CPUFreq.160=160MHz (WiFi)
|
|
deneyapmini.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
deneyapmini.menu.CPUFreq.80=80MHz (WiFi)
|
|
deneyapmini.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
deneyapmini.menu.CPUFreq.40=40MHz
|
|
deneyapmini.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
deneyapmini.menu.CPUFreq.20=20MHz
|
|
deneyapmini.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
deneyapmini.menu.CPUFreq.10=10MHz
|
|
deneyapmini.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
deneyapmini.menu.FlashMode.qio=QIO
|
|
deneyapmini.menu.FlashMode.qio.build.flash_mode=dio
|
|
deneyapmini.menu.FlashMode.qio.build.boot=qio
|
|
deneyapmini.menu.FlashMode.dio=DIO
|
|
deneyapmini.menu.FlashMode.dio.build.flash_mode=dio
|
|
deneyapmini.menu.FlashMode.dio.build.boot=dio
|
|
|
|
deneyapmini.menu.FlashFreq.80=80MHz
|
|
deneyapmini.menu.FlashFreq.80.build.flash_freq=80m
|
|
deneyapmini.menu.FlashFreq.40=40MHz
|
|
deneyapmini.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
deneyapmini.menu.FlashSize.4M=4MB (32Mb)
|
|
deneyapmini.menu.FlashSize.4M.build.flash_size=4MB
|
|
deneyapmini.menu.FlashSize.8M=8MB (64Mb)
|
|
deneyapmini.menu.FlashSize.8M.build.flash_size=8MB
|
|
deneyapmini.menu.FlashSize.8M.build.partitions=default_8MB
|
|
deneyapmini.menu.FlashSize.2M=2MB (16Mb)
|
|
deneyapmini.menu.FlashSize.2M.build.flash_size=2MB
|
|
deneyapmini.menu.FlashSize.2M.build.partitions=minimal
|
|
deneyapmini.menu.FlashSize.16M=16MB (128Mb)
|
|
deneyapmini.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
deneyapmini.menu.UploadSpeed.921600=921600
|
|
deneyapmini.menu.UploadSpeed.921600.upload.speed=921600
|
|
deneyapmini.menu.UploadSpeed.115200=115200
|
|
deneyapmini.menu.UploadSpeed.115200.upload.speed=115200
|
|
deneyapmini.menu.UploadSpeed.256000.windows=256000
|
|
deneyapmini.menu.UploadSpeed.256000.upload.speed=256000
|
|
deneyapmini.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
deneyapmini.menu.UploadSpeed.230400=230400
|
|
deneyapmini.menu.UploadSpeed.230400.upload.speed=230400
|
|
deneyapmini.menu.UploadSpeed.460800.linux=460800
|
|
deneyapmini.menu.UploadSpeed.460800.macosx=460800
|
|
deneyapmini.menu.UploadSpeed.460800.upload.speed=460800
|
|
deneyapmini.menu.UploadSpeed.512000.windows=512000
|
|
deneyapmini.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
deneyapmini.menu.DebugLevel.none=None
|
|
deneyapmini.menu.DebugLevel.none.build.code_debug=0
|
|
deneyapmini.menu.DebugLevel.error=Error
|
|
deneyapmini.menu.DebugLevel.error.build.code_debug=1
|
|
deneyapmini.menu.DebugLevel.warn=Warn
|
|
deneyapmini.menu.DebugLevel.warn.build.code_debug=2
|
|
deneyapmini.menu.DebugLevel.info=Info
|
|
deneyapmini.menu.DebugLevel.info.build.code_debug=3
|
|
deneyapmini.menu.DebugLevel.debug=Debug
|
|
deneyapmini.menu.DebugLevel.debug.build.code_debug=4
|
|
deneyapmini.menu.DebugLevel.verbose=Verbose
|
|
deneyapmini.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
deneyapmini.menu.EraseFlash.none=Disabled
|
|
deneyapmini.menu.EraseFlash.none.upload.erase_cmd=
|
|
deneyapmini.menu.EraseFlash.all=Enabled
|
|
deneyapmini.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
deneyapminiv2.name=Deneyap Mini v2
|
|
|
|
deneyapminiv2.vid.0=0x303a
|
|
deneyapminiv2.pid.0=0x8144
|
|
|
|
deneyapminiv2.bootloader.tool=esptool_py
|
|
deneyapminiv2.bootloader.tool.default=esptool_py
|
|
|
|
deneyapminiv2.upload.tool=esptool_py
|
|
deneyapminiv2.upload.tool.default=esptool_py
|
|
deneyapminiv2.upload.tool.network=esp_ota
|
|
|
|
deneyapminiv2.upload.maximum_size=1310720
|
|
deneyapminiv2.upload.maximum_data_size=327680
|
|
deneyapminiv2.upload.flags=
|
|
deneyapminiv2.upload.extra_flags=
|
|
deneyapminiv2.upload.use_1200bps_touch=false
|
|
deneyapminiv2.upload.wait_for_upload_port=false
|
|
|
|
deneyapminiv2.serial.disableDTR=false
|
|
deneyapminiv2.serial.disableRTS=false
|
|
|
|
deneyapminiv2.build.tarch=xtensa
|
|
deneyapminiv2.build.bootloader_addr=0x1000
|
|
deneyapminiv2.build.target=esp32s2
|
|
deneyapminiv2.build.mcu=esp32s2
|
|
deneyapminiv2.build.core=esp32
|
|
deneyapminiv2.build.variant=deneyapminiv2
|
|
deneyapminiv2.build.board=DYMv2
|
|
|
|
deneyapminiv2.build.cdc_on_boot=1
|
|
deneyapminiv2.build.msc_on_boot=0
|
|
deneyapminiv2.build.dfu_on_boot=0
|
|
deneyapminiv2.build.f_cpu=240000000L
|
|
deneyapminiv2.build.flash_size=4MB
|
|
deneyapminiv2.build.flash_freq=80m
|
|
deneyapminiv2.build.flash_mode=dio
|
|
deneyapminiv2.build.boot=qio
|
|
deneyapminiv2.build.partitions=default
|
|
deneyapminiv2.build.defines=-DBOARD_HAS_PSRAM
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
deneyapminiv2.menu.JTAGAdapter.default=Disabled
|
|
deneyapminiv2.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
deneyapminiv2.menu.JTAGAdapter.external=FTDI Adapter
|
|
deneyapminiv2.menu.JTAGAdapter.external.build.openocdscript=esp32s2-kaluga-1.cfg
|
|
deneyapminiv2.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
deneyapminiv2.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
deneyapminiv2.menu.JTAGAdapter.bridge.build.openocdscript=esp32s2-bridge.cfg
|
|
deneyapminiv2.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
deneyapminiv2.menu.CDCOnBoot.cdc=Enabled
|
|
deneyapminiv2.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
deneyapminiv2.menu.CDCOnBoot.default=Disabled
|
|
deneyapminiv2.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
deneyapminiv2.menu.MSCOnBoot.default=Disabled
|
|
deneyapminiv2.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
deneyapminiv2.menu.MSCOnBoot.msc=Enabled
|
|
deneyapminiv2.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
deneyapminiv2.menu.DFUOnBoot.default=Disabled
|
|
deneyapminiv2.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
deneyapminiv2.menu.DFUOnBoot.dfu=Enabled
|
|
deneyapminiv2.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
deneyapminiv2.menu.UploadMode.cdc=Internal USB
|
|
deneyapminiv2.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
deneyapminiv2.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
deneyapminiv2.menu.UploadMode.default=UART0
|
|
deneyapminiv2.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
deneyapminiv2.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
deneyapminiv2.menu.PSRAM.enabled=Enabled
|
|
deneyapminiv2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
deneyapminiv2.menu.PSRAM.disabled=Disabled
|
|
deneyapminiv2.menu.PSRAM.disabled.build.defines=
|
|
|
|
deneyapminiv2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
deneyapminiv2.menu.PartitionScheme.default.build.partitions=default
|
|
deneyapminiv2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
deneyapminiv2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
deneyapminiv2.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
deneyapminiv2.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
deneyapminiv2.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
deneyapminiv2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
deneyapminiv2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
deneyapminiv2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
deneyapminiv2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
deneyapminiv2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
deneyapminiv2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
deneyapminiv2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
deneyapminiv2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
deneyapminiv2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
deneyapminiv2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
deneyapminiv2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
deneyapminiv2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
deneyapminiv2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
deneyapminiv2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
deneyapminiv2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
deneyapminiv2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
deneyapminiv2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
deneyapminiv2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
deneyapminiv2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
deneyapminiv2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
deneyapminiv2.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
deneyapminiv2.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
deneyapminiv2.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
deneyapminiv2.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
deneyapminiv2.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
deneyapminiv2.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
deneyapminiv2.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
deneyapminiv2.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
deneyapminiv2.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
deneyapminiv2.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
deneyapminiv2.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
deneyapminiv2.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
deneyapminiv2.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
deneyapminiv2.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
deneyapminiv2.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
deneyapminiv2.menu.CPUFreq.240=240MHz (WiFi)
|
|
deneyapminiv2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
deneyapminiv2.menu.CPUFreq.160=160MHz (WiFi)
|
|
deneyapminiv2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
deneyapminiv2.menu.CPUFreq.80=80MHz (WiFi)
|
|
deneyapminiv2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
deneyapminiv2.menu.CPUFreq.40=40MHz
|
|
deneyapminiv2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
deneyapminiv2.menu.CPUFreq.20=20MHz
|
|
deneyapminiv2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
deneyapminiv2.menu.CPUFreq.10=10MHz
|
|
deneyapminiv2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
deneyapminiv2.menu.FlashMode.qio=QIO
|
|
deneyapminiv2.menu.FlashMode.qio.build.flash_mode=dio
|
|
deneyapminiv2.menu.FlashMode.qio.build.boot=qio
|
|
deneyapminiv2.menu.FlashMode.dio=DIO
|
|
deneyapminiv2.menu.FlashMode.dio.build.flash_mode=dio
|
|
deneyapminiv2.menu.FlashMode.dio.build.boot=dio
|
|
|
|
deneyapminiv2.menu.FlashFreq.80=80MHz
|
|
deneyapminiv2.menu.FlashFreq.80.build.flash_freq=80m
|
|
deneyapminiv2.menu.FlashFreq.40=40MHz
|
|
deneyapminiv2.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
deneyapminiv2.menu.FlashSize.4M=4MB (32Mb)
|
|
deneyapminiv2.menu.FlashSize.4M.build.flash_size=4MB
|
|
deneyapminiv2.menu.FlashSize.8M=8MB (64Mb)
|
|
deneyapminiv2.menu.FlashSize.8M.build.flash_size=8MB
|
|
deneyapminiv2.menu.FlashSize.8M.build.partitions=default_8MB
|
|
deneyapminiv2.menu.FlashSize.2M=2MB (16Mb)
|
|
deneyapminiv2.menu.FlashSize.2M.build.flash_size=2MB
|
|
deneyapminiv2.menu.FlashSize.2M.build.partitions=minimal
|
|
deneyapminiv2.menu.FlashSize.16M=16MB (128Mb)
|
|
deneyapminiv2.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
deneyapminiv2.menu.UploadSpeed.921600=921600
|
|
deneyapminiv2.menu.UploadSpeed.921600.upload.speed=921600
|
|
deneyapminiv2.menu.UploadSpeed.115200=115200
|
|
deneyapminiv2.menu.UploadSpeed.115200.upload.speed=115200
|
|
deneyapminiv2.menu.UploadSpeed.256000.windows=256000
|
|
deneyapminiv2.menu.UploadSpeed.256000.upload.speed=256000
|
|
deneyapminiv2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
deneyapminiv2.menu.UploadSpeed.230400=230400
|
|
deneyapminiv2.menu.UploadSpeed.230400.upload.speed=230400
|
|
deneyapminiv2.menu.UploadSpeed.460800.linux=460800
|
|
deneyapminiv2.menu.UploadSpeed.460800.macosx=460800
|
|
deneyapminiv2.menu.UploadSpeed.460800.upload.speed=460800
|
|
deneyapminiv2.menu.UploadSpeed.512000.windows=512000
|
|
deneyapminiv2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
deneyapminiv2.menu.DebugLevel.none=None
|
|
deneyapminiv2.menu.DebugLevel.none.build.code_debug=0
|
|
deneyapminiv2.menu.DebugLevel.error=Error
|
|
deneyapminiv2.menu.DebugLevel.error.build.code_debug=1
|
|
deneyapminiv2.menu.DebugLevel.warn=Warn
|
|
deneyapminiv2.menu.DebugLevel.warn.build.code_debug=2
|
|
deneyapminiv2.menu.DebugLevel.info=Info
|
|
deneyapminiv2.menu.DebugLevel.info.build.code_debug=3
|
|
deneyapminiv2.menu.DebugLevel.debug=Debug
|
|
deneyapminiv2.menu.DebugLevel.debug.build.code_debug=4
|
|
deneyapminiv2.menu.DebugLevel.verbose=Verbose
|
|
deneyapminiv2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
deneyapminiv2.menu.EraseFlash.none=Disabled
|
|
deneyapminiv2.menu.EraseFlash.none.upload.erase_cmd=
|
|
deneyapminiv2.menu.EraseFlash.all=Enabled
|
|
deneyapminiv2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
deneyapkartg.name=Deneyap Kart G
|
|
|
|
deneyapkartg.vid.0=0x303a
|
|
deneyapkartg.pid.0=0x814A
|
|
|
|
deneyapkartg.bootloader.tool=esptool_py
|
|
deneyapkartg.bootloader.tool.default=esptool_py
|
|
|
|
deneyapkartg.upload.tool=esptool_py
|
|
deneyapkartg.upload.tool.default=esptool_py
|
|
deneyapkartg.upload.tool.network=esp_ota
|
|
|
|
deneyapkartg.upload.maximum_size=1310720
|
|
deneyapkartg.upload.maximum_data_size=327680
|
|
deneyapkartg.upload.flags=
|
|
deneyapkartg.upload.extra_flags=
|
|
deneyapkartg.upload.use_1200bps_touch=false
|
|
deneyapkartg.upload.wait_for_upload_port=false
|
|
|
|
deneyapkartg.serial.disableDTR=false
|
|
deneyapkartg.serial.disableRTS=false
|
|
|
|
deneyapkartg.build.tarch=riscv32
|
|
deneyapkartg.build.target=esp
|
|
deneyapkartg.build.mcu=esp32c3
|
|
deneyapkartg.build.core=esp32
|
|
deneyapkartg.build.variant=deneyapkartg
|
|
deneyapkartg.build.board=DYG
|
|
deneyapkartg.build.bootloader_addr=0x0
|
|
|
|
deneyapkartg.build.cdc_on_boot=1
|
|
deneyapkartg.build.f_cpu=160000000L
|
|
deneyapkartg.build.flash_size=4MB
|
|
deneyapkartg.build.flash_freq=80m
|
|
deneyapkartg.build.flash_mode=dio
|
|
deneyapkartg.build.boot=qio
|
|
deneyapkartg.build.partitions=default
|
|
deneyapkartg.build.defines=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
deneyapkartg.menu.JTAGAdapter.default=Disabled
|
|
deneyapkartg.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
deneyapkartg.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
deneyapkartg.menu.JTAGAdapter.builtin.build.openocdscript=esp32c3-builtin.cfg
|
|
deneyapkartg.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
deneyapkartg.menu.JTAGAdapter.external=FTDI Adapter
|
|
deneyapkartg.menu.JTAGAdapter.external.build.openocdscript=esp32c3-ftdi.cfg
|
|
deneyapkartg.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
deneyapkartg.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
deneyapkartg.menu.JTAGAdapter.bridge.build.openocdscript=esp32c3-bridge.cfg
|
|
deneyapkartg.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
deneyapkartg.menu.CDCOnBoot.cdc=Enabled
|
|
deneyapkartg.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
deneyapkartg.menu.CDCOnBoot.default=Disabled
|
|
deneyapkartg.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
deneyapkartg.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
deneyapkartg.menu.PartitionScheme.default.build.partitions=default
|
|
deneyapkartg.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
deneyapkartg.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
deneyapkartg.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
deneyapkartg.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
deneyapkartg.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
deneyapkartg.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
deneyapkartg.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
deneyapkartg.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
deneyapkartg.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
deneyapkartg.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
deneyapkartg.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
deneyapkartg.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
deneyapkartg.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
deneyapkartg.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
deneyapkartg.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
deneyapkartg.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
deneyapkartg.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
deneyapkartg.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
deneyapkartg.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
deneyapkartg.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
deneyapkartg.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
deneyapkartg.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
deneyapkartg.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
deneyapkartg.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
deneyapkartg.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
deneyapkartg.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
deneyapkartg.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
deneyapkartg.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
deneyapkartg.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
deneyapkartg.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
deneyapkartg.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
deneyapkartg.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
deneyapkartg.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
deneyapkartg.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
deneyapkartg.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
deneyapkartg.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
deneyapkartg.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
deneyapkartg.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
deneyapkartg.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
deneyapkartg.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
deneyapkartg.menu.CPUFreq.160=160MHz (WiFi)
|
|
deneyapkartg.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
deneyapkartg.menu.CPUFreq.80=80MHz (WiFi)
|
|
deneyapkartg.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
deneyapkartg.menu.CPUFreq.40=40MHz
|
|
deneyapkartg.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
deneyapkartg.menu.CPUFreq.20=20MHz
|
|
deneyapkartg.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
deneyapkartg.menu.CPUFreq.10=10MHz
|
|
deneyapkartg.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
deneyapkartg.menu.FlashMode.qio=QIO
|
|
deneyapkartg.menu.FlashMode.qio.build.flash_mode=dio
|
|
deneyapkartg.menu.FlashMode.qio.build.boot=qio
|
|
deneyapkartg.menu.FlashMode.dio=DIO
|
|
deneyapkartg.menu.FlashMode.dio.build.flash_mode=dio
|
|
deneyapkartg.menu.FlashMode.dio.build.boot=dio
|
|
|
|
deneyapkartg.menu.FlashFreq.80=80MHz
|
|
deneyapkartg.menu.FlashFreq.80.build.flash_freq=80m
|
|
deneyapkartg.menu.FlashFreq.40=40MHz
|
|
deneyapkartg.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
deneyapkartg.menu.FlashSize.4M=4MB (32Mb)
|
|
deneyapkartg.menu.FlashSize.4M.build.flash_size=4MB
|
|
deneyapkartg.menu.FlashSize.8M=8MB (64Mb)
|
|
deneyapkartg.menu.FlashSize.8M.build.flash_size=8MB
|
|
deneyapkartg.menu.FlashSize.8M.build.partitions=default_8MB
|
|
deneyapkartg.menu.FlashSize.2M=2MB (16Mb)
|
|
deneyapkartg.menu.FlashSize.2M.build.flash_size=2MB
|
|
deneyapkartg.menu.FlashSize.2M.build.partitions=minimal
|
|
deneyapkartg.menu.FlashSize.16M=16MB (128Mb)
|
|
deneyapkartg.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
deneyapkartg.menu.UploadSpeed.921600=921600
|
|
deneyapkartg.menu.UploadSpeed.921600.upload.speed=921600
|
|
deneyapkartg.menu.UploadSpeed.115200=115200
|
|
deneyapkartg.menu.UploadSpeed.115200.upload.speed=115200
|
|
deneyapkartg.menu.UploadSpeed.256000.windows=256000
|
|
deneyapkartg.menu.UploadSpeed.256000.upload.speed=256000
|
|
deneyapkartg.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
deneyapkartg.menu.UploadSpeed.230400=230400
|
|
deneyapkartg.menu.UploadSpeed.230400.upload.speed=230400
|
|
deneyapkartg.menu.UploadSpeed.460800.linux=460800
|
|
deneyapkartg.menu.UploadSpeed.460800.macosx=460800
|
|
deneyapkartg.menu.UploadSpeed.460800.upload.speed=460800
|
|
deneyapkartg.menu.UploadSpeed.512000.windows=512000
|
|
deneyapkartg.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
deneyapkartg.menu.DebugLevel.none=None
|
|
deneyapkartg.menu.DebugLevel.none.build.code_debug=0
|
|
deneyapkartg.menu.DebugLevel.error=Error
|
|
deneyapkartg.menu.DebugLevel.error.build.code_debug=1
|
|
deneyapkartg.menu.DebugLevel.warn=Warn
|
|
deneyapkartg.menu.DebugLevel.warn.build.code_debug=2
|
|
deneyapkartg.menu.DebugLevel.info=Info
|
|
deneyapkartg.menu.DebugLevel.info.build.code_debug=3
|
|
deneyapkartg.menu.DebugLevel.debug=Debug
|
|
deneyapkartg.menu.DebugLevel.debug.build.code_debug=4
|
|
deneyapkartg.menu.DebugLevel.verbose=Verbose
|
|
deneyapkartg.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
deneyapkartg.menu.EraseFlash.none=Disabled
|
|
deneyapkartg.menu.EraseFlash.none.upload.erase_cmd=
|
|
deneyapkartg.menu.EraseFlash.all=Enabled
|
|
deneyapkartg.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32-trueverit-iot-driver.name=Trueverit ESP32 Universal IoT Driver
|
|
|
|
esp32-trueverit-iot-driver.bootloader.tool=esptool_py
|
|
esp32-trueverit-iot-driver.bootloader.tool.default=esptool_py
|
|
|
|
esp32-trueverit-iot-driver.upload.tool=esptool_py
|
|
esp32-trueverit-iot-driver.upload.tool.default=esptool_py
|
|
esp32-trueverit-iot-driver.upload.tool.network=esp_ota
|
|
|
|
esp32-trueverit-iot-driver.upload.maximum_size=1310720
|
|
esp32-trueverit-iot-driver.upload.maximum_data_size=327680
|
|
esp32-trueverit-iot-driver.upload.flags=
|
|
esp32-trueverit-iot-driver.upload.extra_flags=
|
|
|
|
esp32-trueverit-iot-driver.serial.disableDTR=true
|
|
esp32-trueverit-iot-driver.serial.disableRTS=true
|
|
|
|
esp32-trueverit-iot-driver.build.tarch=xtensa
|
|
esp32-trueverit-iot-driver.build.bootloader_addr=0x1000
|
|
esp32-trueverit-iot-driver.build.target=esp32
|
|
esp32-trueverit-iot-driver.build.mcu=esp32
|
|
esp32-trueverit-iot-driver.build.core=esp32
|
|
esp32-trueverit-iot-driver.build.variant=esp32-trueverit-iot-driver
|
|
esp32-trueverit-iot-driver.build.board=Trueverit_ESP32_Universal_IoT_Driver
|
|
|
|
esp32-trueverit-iot-driver.build.f_cpu=240000000L
|
|
esp32-trueverit-iot-driver.build.flash_mode=dio
|
|
esp32-trueverit-iot-driver.build.flash_size=4MB
|
|
esp32-trueverit-iot-driver.build.boot=dio
|
|
esp32-trueverit-iot-driver.build.partitions=default
|
|
esp32-trueverit-iot-driver.build.defines=
|
|
|
|
esp32-trueverit-iot-driver.menu.FlashFreq.80=80MHz
|
|
esp32-trueverit-iot-driver.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32-trueverit-iot-driver.menu.FlashFreq.40=40MHz
|
|
esp32-trueverit-iot-driver.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32-trueverit-iot-driver.menu.UploadSpeed.115200=115200
|
|
esp32-trueverit-iot-driver.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32-trueverit-iot-driver.menu.UploadSpeed.256000.windows=256000
|
|
esp32-trueverit-iot-driver.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32-trueverit-iot-driver.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32-trueverit-iot-driver.menu.UploadSpeed.230400=230400
|
|
esp32-trueverit-iot-driver.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32-trueverit-iot-driver.menu.UploadSpeed.460800.linux=460800
|
|
esp32-trueverit-iot-driver.menu.UploadSpeed.460800.macosx=460800
|
|
esp32-trueverit-iot-driver.menu.UploadSpeed.460800.upload.speed=460800
|
|
|
|
esp32-trueverit-iot-driver.menu.DebugLevel.none=None
|
|
esp32-trueverit-iot-driver.menu.DebugLevel.none.build.code_debug=0
|
|
esp32-trueverit-iot-driver.menu.DebugLevel.error=Error
|
|
esp32-trueverit-iot-driver.menu.DebugLevel.error.build.code_debug=1
|
|
esp32-trueverit-iot-driver.menu.DebugLevel.warn=Warn
|
|
esp32-trueverit-iot-driver.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32-trueverit-iot-driver.menu.DebugLevel.info=Info
|
|
esp32-trueverit-iot-driver.menu.DebugLevel.info.build.code_debug=3
|
|
esp32-trueverit-iot-driver.menu.DebugLevel.debug=Debug
|
|
esp32-trueverit-iot-driver.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32-trueverit-iot-driver.menu.DebugLevel.verbose=Verbose
|
|
esp32-trueverit-iot-driver.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32-trueverit-iot-driver.menu.EraseFlash.none=Disabled
|
|
esp32-trueverit-iot-driver.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32-trueverit-iot-driver.menu.EraseFlash.all=Enabled
|
|
esp32-trueverit-iot-driver.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32-trueverit-iot-driver-mkii.name=Trueverit ESP32 Universal IoT Driver MK II
|
|
|
|
esp32-trueverit-iot-driver-mkii.bootloader.tool=esptool_py
|
|
esp32-trueverit-iot-driver-mkii.bootloader.tool.default=esptool_py
|
|
|
|
esp32-trueverit-iot-driver-mkii.upload.tool=esptool_py
|
|
esp32-trueverit-iot-driver-mkii.upload.tool.default=esptool_py
|
|
esp32-trueverit-iot-driver-mkii.upload.tool.network=esp_ota
|
|
|
|
esp32-trueverit-iot-driver-mkii.upload.maximum_size=1310720
|
|
esp32-trueverit-iot-driver-mkii.upload.maximum_data_size=327680
|
|
esp32-trueverit-iot-driver-mkii.upload.flags=
|
|
esp32-trueverit-iot-driver-mkii.upload.extra_flags=
|
|
|
|
esp32-trueverit-iot-driver-mkii.serial.disableDTR=true
|
|
esp32-trueverit-iot-driver-mkii.serial.disableRTS=true
|
|
|
|
esp32-trueverit-iot-driver-mkii.build.tarch=xtensa
|
|
esp32-trueverit-iot-driver-mkii.build.bootloader_addr=0x1000
|
|
esp32-trueverit-iot-driver-mkii.build.target=esp32
|
|
esp32-trueverit-iot-driver-mkii.build.mcu=esp32
|
|
esp32-trueverit-iot-driver-mkii.build.core=esp32
|
|
esp32-trueverit-iot-driver-mkii.build.variant=esp32-trueverit-iot-driver-mkii
|
|
esp32-trueverit-iot-driver-mkii.build.board=Trueverit_ESP32_Universal_IoT_Driver_MK_II
|
|
|
|
esp32-trueverit-iot-driver-mkii.build.f_cpu=240000000L
|
|
esp32-trueverit-iot-driver-mkii.build.flash_mode=dio
|
|
esp32-trueverit-iot-driver-mkii.build.flash_size=4MB
|
|
esp32-trueverit-iot-driver-mkii.build.boot=dio
|
|
esp32-trueverit-iot-driver-mkii.build.partitions=default
|
|
esp32-trueverit-iot-driver-mkii.build.defines=
|
|
|
|
esp32-trueverit-iot-driver-mkii.menu.FlashFreq.80=80MHz
|
|
esp32-trueverit-iot-driver-mkii.menu.FlashFreq.80.build.flash_freq=80m
|
|
esp32-trueverit-iot-driver-mkii.menu.FlashFreq.40=40MHz
|
|
esp32-trueverit-iot-driver-mkii.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
esp32-trueverit-iot-driver-mkii.menu.UploadSpeed.115200=115200
|
|
esp32-trueverit-iot-driver-mkii.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32-trueverit-iot-driver-mkii.menu.UploadSpeed.256000.windows=256000
|
|
esp32-trueverit-iot-driver-mkii.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32-trueverit-iot-driver-mkii.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32-trueverit-iot-driver-mkii.menu.UploadSpeed.230400=230400
|
|
esp32-trueverit-iot-driver-mkii.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32-trueverit-iot-driver-mkii.menu.UploadSpeed.460800.linux=460800
|
|
esp32-trueverit-iot-driver-mkii.menu.UploadSpeed.460800.macosx=460800
|
|
esp32-trueverit-iot-driver-mkii.menu.UploadSpeed.460800.upload.speed=460800
|
|
|
|
esp32-trueverit-iot-driver-mkii.menu.DebugLevel.none=None
|
|
esp32-trueverit-iot-driver-mkii.menu.DebugLevel.none.build.code_debug=0
|
|
esp32-trueverit-iot-driver-mkii.menu.DebugLevel.error=Error
|
|
esp32-trueverit-iot-driver-mkii.menu.DebugLevel.error.build.code_debug=1
|
|
esp32-trueverit-iot-driver-mkii.menu.DebugLevel.warn=Warn
|
|
esp32-trueverit-iot-driver-mkii.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32-trueverit-iot-driver-mkii.menu.DebugLevel.info=Info
|
|
esp32-trueverit-iot-driver-mkii.menu.DebugLevel.info.build.code_debug=3
|
|
esp32-trueverit-iot-driver-mkii.menu.DebugLevel.debug=Debug
|
|
esp32-trueverit-iot-driver-mkii.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32-trueverit-iot-driver-mkii.menu.DebugLevel.verbose=Verbose
|
|
esp32-trueverit-iot-driver-mkii.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32-trueverit-iot-driver-mkii.menu.EraseFlash.none=Disabled
|
|
esp32-trueverit-iot-driver-mkii.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32-trueverit-iot-driver-mkii.menu.EraseFlash.all=Enabled
|
|
esp32-trueverit-iot-driver-mkii.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
atmegazero_esp32s2.name=ATMegaZero ESP32-S2
|
|
atmegazero_esp32s2.vid.0=0x239A
|
|
atmegazero_esp32s2.pid.0=0x800A
|
|
|
|
atmegazero_esp32s2.bootloader.tool=esptool_py
|
|
atmegazero_esp32s2.bootloader.tool.default=esptool_py
|
|
|
|
atmegazero_esp32s2.upload.tool=esptool_py
|
|
atmegazero_esp32s2.upload.tool.default=esptool_py
|
|
atmegazero_esp32s2.upload.tool.network=esp_ota
|
|
|
|
atmegazero_esp32s2.upload.maximum_size=1310720
|
|
atmegazero_esp32s2.upload.maximum_data_size=327680
|
|
atmegazero_esp32s2.upload.flags=
|
|
atmegazero_esp32s2.upload.extra_flags=
|
|
atmegazero_esp32s2.upload.use_1200bps_touch=true
|
|
atmegazero_esp32s2.upload.wait_for_upload_port=true
|
|
|
|
atmegazero_esp32s2.serial.disableDTR=false
|
|
atmegazero_esp32s2.serial.disableRTS=false
|
|
|
|
atmegazero_esp32s2.build.tarch=xtensa
|
|
atmegazero_esp32s2.build.bootloader_addr=0x1000
|
|
atmegazero_esp32s2.build.target=esp32s2
|
|
atmegazero_esp32s2.build.mcu=esp32s2
|
|
atmegazero_esp32s2.build.core=esp32
|
|
atmegazero_esp32s2.build.variant=atmegazero_esp32s2
|
|
atmegazero_esp32s2.build.board=atmegazero_esp32s2
|
|
|
|
atmegazero_esp32s2.build.cdc_on_boot=1
|
|
atmegazero_esp32s2.build.msc_on_boot=0
|
|
atmegazero_esp32s2.build.dfu_on_boot=0
|
|
atmegazero_esp32s2.build.serial=0
|
|
atmegazero_esp32s2.build.f_cpu=240000000L
|
|
atmegazero_esp32s2.build.flash_size=16MB
|
|
atmegazero_esp32s2.build.flash_freq=40m
|
|
atmegazero_esp32s2.build.flash_mode=qio
|
|
atmegazero_esp32s2.build.boot=qio
|
|
atmegazero_esp32s2.build.partitions=default
|
|
atmegazero_esp32s2.build.defines=
|
|
|
|
atmegazero_esp32s2.menu.CDCOnBoot.cdc=Enabled
|
|
atmegazero_esp32s2.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
atmegazero_esp32s2.menu.CDCOnBoot.default=Disabled
|
|
atmegazero_esp32s2.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
atmegazero_esp32s2.menu.MSCOnBoot.default=Disabled
|
|
atmegazero_esp32s2.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
atmegazero_esp32s2.menu.MSCOnBoot.msc=Enabled
|
|
atmegazero_esp32s2.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
atmegazero_esp32s2.menu.DFUOnBoot.default=Disabled
|
|
atmegazero_esp32s2.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
atmegazero_esp32s2.menu.DFUOnBoot.dfu=Enabled
|
|
atmegazero_esp32s2.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
atmegazero_esp32s2.menu.PSRAM.disabled=Disabled
|
|
atmegazero_esp32s2.menu.PSRAM.disabled.build.defines=
|
|
atmegazero_esp32s2.menu.PSRAM.enabled=Enabled
|
|
atmegazero_esp32s2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
|
|
atmegazero_esp32s2.menu.PartitionScheme.tinyuf2=TinyUF2 16MB (2MB APP/11.6MB FFAT)
|
|
atmegazero_esp32s2.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
atmegazero_esp32s2.menu.PartitionScheme.tinyuf2.build.custom_partitions=partitions-16MB-tinyuf2
|
|
atmegazero_esp32s2.menu.PartitionScheme.tinyuf2.upload.maximum_size=2097152
|
|
atmegazero_esp32s2.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
atmegazero_esp32s2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
atmegazero_esp32s2.menu.PartitionScheme.default.build.partitions=default
|
|
atmegazero_esp32s2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
atmegazero_esp32s2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
atmegazero_esp32s2.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
atmegazero_esp32s2.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
atmegazero_esp32s2.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
atmegazero_esp32s2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
atmegazero_esp32s2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
atmegazero_esp32s2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
atmegazero_esp32s2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
atmegazero_esp32s2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
atmegazero_esp32s2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
atmegazero_esp32s2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
atmegazero_esp32s2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
atmegazero_esp32s2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
atmegazero_esp32s2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
atmegazero_esp32s2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
atmegazero_esp32s2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
atmegazero_esp32s2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
atmegazero_esp32s2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
atmegazero_esp32s2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
atmegazero_esp32s2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
atmegazero_esp32s2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
atmegazero_esp32s2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
atmegazero_esp32s2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
atmegazero_esp32s2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
atmegazero_esp32s2.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
atmegazero_esp32s2.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
atmegazero_esp32s2.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
atmegazero_esp32s2.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
atmegazero_esp32s2.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
atmegazero_esp32s2.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
|
|
atmegazero_esp32s2.menu.CPUFreq.240=240MHz (WiFi)
|
|
atmegazero_esp32s2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
atmegazero_esp32s2.menu.CPUFreq.160=160MHz (WiFi)
|
|
atmegazero_esp32s2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
atmegazero_esp32s2.menu.CPUFreq.80=80MHz (WiFi)
|
|
atmegazero_esp32s2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
atmegazero_esp32s2.menu.CPUFreq.40=40MHz
|
|
atmegazero_esp32s2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
atmegazero_esp32s2.menu.CPUFreq.20=20MHz
|
|
atmegazero_esp32s2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
atmegazero_esp32s2.menu.CPUFreq.10=10MHz
|
|
atmegazero_esp32s2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
atmegazero_esp32s2.menu.FlashMode.qio=QIO
|
|
atmegazero_esp32s2.menu.FlashMode.qio.build.flash_mode=dio
|
|
atmegazero_esp32s2.menu.FlashMode.qio.build.boot=qio
|
|
atmegazero_esp32s2.menu.FlashMode.dio=DIO
|
|
atmegazero_esp32s2.menu.FlashMode.dio.build.flash_mode=dio
|
|
atmegazero_esp32s2.menu.FlashMode.dio.build.boot=dio
|
|
|
|
atmegazero_esp32s2.menu.FlashFreq.80=80MHz
|
|
atmegazero_esp32s2.menu.FlashFreq.80.build.flash_freq=80m
|
|
atmegazero_esp32s2.menu.FlashFreq.40=40MHz
|
|
atmegazero_esp32s2.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
atmegazero_esp32s2.menu.FlashSize.4M=4MB (32Mb)
|
|
atmegazero_esp32s2.menu.FlashSize.4M.build.flash_size=4MB
|
|
atmegazero_esp32s2.menu.FlashSize.8M=8MB (64Mb)
|
|
atmegazero_esp32s2.menu.FlashSize.8M.build.flash_size=8MB
|
|
atmegazero_esp32s2.menu.FlashSize.8M.build.partitions=default_8MB
|
|
atmegazero_esp32s2.menu.FlashSize.2M=2MB (16Mb)
|
|
atmegazero_esp32s2.menu.FlashSize.2M.build.flash_size=2MB
|
|
atmegazero_esp32s2.menu.FlashSize.2M.build.partitions=minimal
|
|
atmegazero_esp32s2.menu.FlashSize.16M=16MB (128Mb)
|
|
atmegazero_esp32s2.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
atmegazero_esp32s2.menu.UploadSpeed.921600=921600
|
|
atmegazero_esp32s2.menu.UploadSpeed.921600.upload.speed=921600
|
|
atmegazero_esp32s2.menu.UploadSpeed.115200=115200
|
|
atmegazero_esp32s2.menu.UploadSpeed.115200.upload.speed=115200
|
|
atmegazero_esp32s2.menu.UploadSpeed.256000.windows=256000
|
|
atmegazero_esp32s2.menu.UploadSpeed.256000.upload.speed=256000
|
|
atmegazero_esp32s2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
atmegazero_esp32s2.menu.UploadSpeed.230400=230400
|
|
atmegazero_esp32s2.menu.UploadSpeed.230400.upload.speed=230400
|
|
atmegazero_esp32s2.menu.UploadSpeed.460800.linux=460800
|
|
atmegazero_esp32s2.menu.UploadSpeed.460800.macosx=460800
|
|
atmegazero_esp32s2.menu.UploadSpeed.460800.upload.speed=460800
|
|
atmegazero_esp32s2.menu.UploadSpeed.512000.windows=512000
|
|
atmegazero_esp32s2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
atmegazero_esp32s2.menu.DebugLevel.none=None
|
|
atmegazero_esp32s2.menu.DebugLevel.none.build.code_debug=0
|
|
atmegazero_esp32s2.menu.DebugLevel.error=Error
|
|
atmegazero_esp32s2.menu.DebugLevel.error.build.code_debug=1
|
|
atmegazero_esp32s2.menu.DebugLevel.warn=Warn
|
|
atmegazero_esp32s2.menu.DebugLevel.warn.build.code_debug=2
|
|
atmegazero_esp32s2.menu.DebugLevel.info=Info
|
|
atmegazero_esp32s2.menu.DebugLevel.info.build.code_debug=3
|
|
atmegazero_esp32s2.menu.DebugLevel.debug=Debug
|
|
atmegazero_esp32s2.menu.DebugLevel.debug.build.code_debug=4
|
|
atmegazero_esp32s2.menu.DebugLevel.verbose=Verbose
|
|
atmegazero_esp32s2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
atmegazero_esp32s2.menu.EraseFlash.none=Disabled
|
|
atmegazero_esp32s2.menu.EraseFlash.none.upload.erase_cmd=
|
|
atmegazero_esp32s2.menu.EraseFlash.all=Enabled
|
|
atmegazero_esp32s2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
franzininho_wifi_esp32s2.name=Franzininho WiFi
|
|
franzininho_wifi_esp32s2.vid.0=0x303A
|
|
franzininho_wifi_esp32s2.pid.0=0x80A9
|
|
|
|
franzininho_wifi_esp32s2.bootloader.tool=esptool_py
|
|
franzininho_wifi_esp32s2.bootloader.tool.default=esptool_py
|
|
|
|
franzininho_wifi_esp32s2.upload.tool=esptool_py
|
|
franzininho_wifi_esp32s2.upload.tool.default=esptool_py
|
|
franzininho_wifi_esp32s2.upload.tool.network=esp_ota
|
|
|
|
franzininho_wifi_esp32s2.upload.maximum_size=1310720
|
|
franzininho_wifi_esp32s2.upload.maximum_data_size=327680
|
|
franzininho_wifi_esp32s2.upload.flags=
|
|
franzininho_wifi_esp32s2.upload.extra_flags=
|
|
franzininho_wifi_esp32s2.upload.use_1200bps_touch=true
|
|
franzininho_wifi_esp32s2.upload.wait_for_upload_port=true
|
|
franzininho_wifi_esp32s2.upload.speed=921600
|
|
|
|
franzininho_wifi_esp32s2.serial.disableDTR=false
|
|
franzininho_wifi_esp32s2.serial.disableRTS=false
|
|
|
|
franzininho_wifi_esp32s2.build.tarch=xtensa
|
|
franzininho_wifi_esp32s2.build.bootloader_addr=0x1000
|
|
franzininho_wifi_esp32s2.build.target=esp32s2
|
|
franzininho_wifi_esp32s2.build.mcu=esp32s2
|
|
franzininho_wifi_esp32s2.build.core=esp32
|
|
franzininho_wifi_esp32s2.build.variant=franzininho_wifi_esp32s2
|
|
franzininho_wifi_esp32s2.build.board=FRANZININHO_WIFI
|
|
|
|
franzininho_wifi_esp32s2.build.cdc_on_boot=1
|
|
franzininho_wifi_esp32s2.build.msc_on_boot=0
|
|
franzininho_wifi_esp32s2.build.dfu_on_boot=0
|
|
franzininho_wifi_esp32s2.build.f_cpu=240000000L
|
|
franzininho_wifi_esp32s2.build.flash_size=4MB
|
|
franzininho_wifi_esp32s2.build.flash_freq=80m
|
|
franzininho_wifi_esp32s2.build.flash_mode=dio
|
|
franzininho_wifi_esp32s2.build.boot=qio
|
|
franzininho_wifi_esp32s2.build.partitions=default
|
|
franzininho_wifi_esp32s2.build.defines=
|
|
|
|
franzininho_wifi_esp32s2.menu.PSRAM.disabled=Disabled
|
|
franzininho_wifi_esp32s2.menu.PSRAM.disabled.build.defines=
|
|
franzininho_wifi_esp32s2.menu.PSRAM.enabled=Enabled
|
|
franzininho_wifi_esp32s2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
|
|
franzininho_wifi_esp32s2.menu.FlashSize.4M=4MB (32Mb)
|
|
franzininho_wifi_esp32s2.menu.FlashSize.4M.build.flash_size=4MB
|
|
franzininho_wifi_esp32s2.menu.FlashSize.8M=8MB (64Mb)
|
|
franzininho_wifi_esp32s2.menu.FlashSize.8M.build.flash_size=8MB
|
|
franzininho_wifi_esp32s2.menu.FlashSize.8M.build.partitions=default_8MB
|
|
franzininho_wifi_esp32s2.menu.FlashSize.16M=16MB (128Mb)
|
|
franzininho_wifi_esp32s2.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.default.build.partitions=default
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
franzininho_wifi_esp32s2.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
|
|
franzininho_wifi_esp32s2.menu.DebugLevel.none=None
|
|
franzininho_wifi_esp32s2.menu.DebugLevel.none.build.code_debug=0
|
|
franzininho_wifi_esp32s2.menu.DebugLevel.error=Error
|
|
franzininho_wifi_esp32s2.menu.DebugLevel.error.build.code_debug=1
|
|
franzininho_wifi_esp32s2.menu.DebugLevel.warn=Warn
|
|
franzininho_wifi_esp32s2.menu.DebugLevel.warn.build.code_debug=2
|
|
franzininho_wifi_esp32s2.menu.DebugLevel.info=Info
|
|
franzininho_wifi_esp32s2.menu.DebugLevel.info.build.code_debug=3
|
|
franzininho_wifi_esp32s2.menu.DebugLevel.debug=Debug
|
|
franzininho_wifi_esp32s2.menu.DebugLevel.debug.build.code_debug=4
|
|
franzininho_wifi_esp32s2.menu.DebugLevel.verbose=Verbose
|
|
franzininho_wifi_esp32s2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
franzininho_wifi_esp32s2.menu.EraseFlash.none=Disabled
|
|
franzininho_wifi_esp32s2.menu.EraseFlash.none.upload.erase_cmd=
|
|
franzininho_wifi_esp32s2.menu.EraseFlash.all=Enabled
|
|
franzininho_wifi_esp32s2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
franzininho_wifi_msc_esp32s2.name=Franzininho WiFi MSC
|
|
franzininho_wifi_msc_esp32s2.vid.0=0x303A
|
|
franzininho_wifi_msc_esp32s2.pid.0=0x80A9
|
|
|
|
franzininho_wifi_msc_esp32s2.bootloader.tool=esptool_py
|
|
franzininho_wifi_msc_esp32s2.bootloader.tool.default=esptool_py
|
|
|
|
franzininho_wifi_msc_esp32s2.upload.tool=esptool_py
|
|
franzininho_wifi_msc_esp32s2.upload.tool.default=esptool_py
|
|
franzininho_wifi_msc_esp32s2.upload.tool.network=esp_ota
|
|
|
|
franzininho_wifi_msc_esp32s2.upload.maximum_size=1310720
|
|
franzininho_wifi_msc_esp32s2.upload.maximum_data_size=327680
|
|
franzininho_wifi_msc_esp32s2.upload.flags=
|
|
franzininho_wifi_msc_esp32s2.upload.extra_flags=
|
|
franzininho_wifi_msc_esp32s2.upload.use_1200bps_touch=true
|
|
franzininho_wifi_msc_esp32s2.upload.wait_for_upload_port=true
|
|
franzininho_wifi_msc_esp32s2.upload.speed=921600
|
|
|
|
franzininho_wifi_msc_esp32s2.serial.disableDTR=false
|
|
franzininho_wifi_msc_esp32s2.serial.disableRTS=false
|
|
|
|
franzininho_wifi_msc_esp32s2.build.tarch=xtensa
|
|
franzininho_wifi_msc_esp32s2.build.bootloader_addr=0x1000
|
|
franzininho_wifi_msc_esp32s2.build.target=esp32s2
|
|
franzininho_wifi_msc_esp32s2.build.mcu=esp32s2
|
|
franzininho_wifi_msc_esp32s2.build.core=esp32
|
|
franzininho_wifi_msc_esp32s2.build.variant=franzininho_wifi_msc_esp32s2
|
|
franzininho_wifi_msc_esp32s2.build.board=FRANZININHO_WIFI_MSC
|
|
|
|
franzininho_wifi_msc_esp32s2.build.cdc_on_boot=1
|
|
franzininho_wifi_msc_esp32s2.build.msc_on_boot=1
|
|
franzininho_wifi_msc_esp32s2.build.dfu_on_boot=1
|
|
franzininho_wifi_msc_esp32s2.build.f_cpu=240000000L
|
|
franzininho_wifi_msc_esp32s2.build.flash_size=4MB
|
|
franzininho_wifi_msc_esp32s2.build.flash_freq=80m
|
|
franzininho_wifi_msc_esp32s2.build.flash_mode=dio
|
|
franzininho_wifi_msc_esp32s2.build.boot=qio
|
|
franzininho_wifi_msc_esp32s2.build.partitions=default
|
|
franzininho_wifi_msc_esp32s2.build.defines=
|
|
|
|
franzininho_wifi_msc_esp32s2.menu.PSRAM.disabled=Disabled
|
|
franzininho_wifi_msc_esp32s2.menu.PSRAM.disabled.build.defines=
|
|
franzininho_wifi_msc_esp32s2.menu.PSRAM.enabled=Enabled
|
|
franzininho_wifi_msc_esp32s2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
|
|
franzininho_wifi_msc_esp32s2.menu.FlashSize.4M=4MB (32Mb)
|
|
franzininho_wifi_msc_esp32s2.menu.FlashSize.4M.build.flash_size=4MB
|
|
franzininho_wifi_msc_esp32s2.menu.FlashSize.8M=8MB (64Mb)
|
|
franzininho_wifi_msc_esp32s2.menu.FlashSize.8M.build.flash_size=8MB
|
|
franzininho_wifi_msc_esp32s2.menu.FlashSize.8M.build.partitions=default_8MB
|
|
franzininho_wifi_msc_esp32s2.menu.FlashSize.16M=16MB (128Mb)
|
|
franzininho_wifi_msc_esp32s2.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.default.build.partitions=default
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
franzininho_wifi_msc_esp32s2.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
|
|
franzininho_wifi_msc_esp32s2.menu.DebugLevel.none=None
|
|
franzininho_wifi_msc_esp32s2.menu.DebugLevel.none.build.code_debug=0
|
|
franzininho_wifi_msc_esp32s2.menu.DebugLevel.error=Error
|
|
franzininho_wifi_msc_esp32s2.menu.DebugLevel.error.build.code_debug=1
|
|
franzininho_wifi_msc_esp32s2.menu.DebugLevel.warn=Warn
|
|
franzininho_wifi_msc_esp32s2.menu.DebugLevel.warn.build.code_debug=2
|
|
franzininho_wifi_msc_esp32s2.menu.DebugLevel.info=Info
|
|
franzininho_wifi_msc_esp32s2.menu.DebugLevel.info.build.code_debug=3
|
|
franzininho_wifi_msc_esp32s2.menu.DebugLevel.debug=Debug
|
|
franzininho_wifi_msc_esp32s2.menu.DebugLevel.debug.build.code_debug=4
|
|
franzininho_wifi_msc_esp32s2.menu.DebugLevel.verbose=Verbose
|
|
franzininho_wifi_msc_esp32s2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
franzininho_wifi_msc_esp32s2.menu.EraseFlash.none=Disabled
|
|
franzininho_wifi_msc_esp32s2.menu.EraseFlash.none.upload.erase_cmd=
|
|
franzininho_wifi_msc_esp32s2.menu.EraseFlash.all=Enabled
|
|
franzininho_wifi_msc_esp32s2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
tamc_termod_s3.name=TAMC Termod S3
|
|
|
|
tamc_termod_s3.bootloader.tool=esptool_py
|
|
tamc_termod_s3.bootloader.tool.default=esptool_py
|
|
|
|
tamc_termod_s3.upload.tool=esptool_py
|
|
tamc_termod_s3.upload.tool.default=esptool_py
|
|
tamc_termod_s3.upload.tool.network=esp_ota
|
|
|
|
tamc_termod_s3.upload.maximum_size=1310720
|
|
tamc_termod_s3.upload.maximum_data_size=327680
|
|
tamc_termod_s3.upload.flags=
|
|
tamc_termod_s3.upload.extra_flags=
|
|
tamc_termod_s3.upload.use_1200bps_touch=false
|
|
tamc_termod_s3.upload.wait_for_upload_port=false
|
|
|
|
tamc_termod_s3.serial.disableDTR=false
|
|
tamc_termod_s3.serial.disableRTS=false
|
|
|
|
tamc_termod_s3.build.tarch=xtensa
|
|
tamc_termod_s3.build.bootloader_addr=0x0
|
|
tamc_termod_s3.build.target=esp32s3
|
|
tamc_termod_s3.build.mcu=esp32s3
|
|
tamc_termod_s3.build.core=esp32
|
|
tamc_termod_s3.build.variant=tamc_termod_s3
|
|
tamc_termod_s3.build.board=TAMC_TERMOD_S3
|
|
|
|
tamc_termod_s3.build.usb_mode=1
|
|
tamc_termod_s3.build.cdc_on_boot=1
|
|
tamc_termod_s3.build.msc_on_boot=0
|
|
tamc_termod_s3.build.dfu_on_boot=0
|
|
tamc_termod_s3.build.f_cpu=240000000L
|
|
tamc_termod_s3.build.flash_size=8MB
|
|
tamc_termod_s3.build.flash_freq=80m
|
|
tamc_termod_s3.build.flash_mode=dio
|
|
tamc_termod_s3.build.boot=qio
|
|
tamc_termod_s3.build.boot_freq=80m
|
|
tamc_termod_s3.build.partitions=default
|
|
tamc_termod_s3.build.defines=
|
|
tamc_termod_s3.build.loop_core=
|
|
tamc_termod_s3.build.event_core=
|
|
tamc_termod_s3.build.psram_type=qspi
|
|
tamc_termod_s3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
tamc_termod_s3.menu.PSRAM.enabled=QSPI PSRAM
|
|
tamc_termod_s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
tamc_termod_s3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
tamc_termod_s3.menu.PSRAM.disabled=Disabled
|
|
tamc_termod_s3.menu.PSRAM.disabled.build.defines=
|
|
tamc_termod_s3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
tamc_termod_s3.menu.PSRAM.opi=OPI PSRAM
|
|
tamc_termod_s3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
tamc_termod_s3.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
tamc_termod_s3.menu.FlashMode.qio=QIO 80MHz
|
|
tamc_termod_s3.menu.FlashMode.qio.build.flash_mode=dio
|
|
tamc_termod_s3.menu.FlashMode.qio.build.boot=qio
|
|
tamc_termod_s3.menu.FlashMode.qio.build.boot_freq=80m
|
|
tamc_termod_s3.menu.FlashMode.qio.build.flash_freq=80m
|
|
tamc_termod_s3.menu.FlashMode.qio120=QIO 120MHz
|
|
tamc_termod_s3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
tamc_termod_s3.menu.FlashMode.qio120.build.boot=qio
|
|
tamc_termod_s3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
tamc_termod_s3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
tamc_termod_s3.menu.FlashMode.dio=DIO 80MHz
|
|
tamc_termod_s3.menu.FlashMode.dio.build.flash_mode=dio
|
|
tamc_termod_s3.menu.FlashMode.dio.build.boot=dio
|
|
tamc_termod_s3.menu.FlashMode.dio.build.boot_freq=80m
|
|
tamc_termod_s3.menu.FlashMode.dio.build.flash_freq=80m
|
|
tamc_termod_s3.menu.FlashMode.opi=OPI 80MHz
|
|
tamc_termod_s3.menu.FlashMode.opi.build.flash_mode=dout
|
|
tamc_termod_s3.menu.FlashMode.opi.build.boot=opi
|
|
tamc_termod_s3.menu.FlashMode.opi.build.boot_freq=80m
|
|
tamc_termod_s3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
tamc_termod_s3.menu.FlashSize.4M=4MB (32Mb)
|
|
tamc_termod_s3.menu.FlashSize.4M.build.flash_size=4MB
|
|
tamc_termod_s3.menu.FlashSize.8M=8MB (64Mb)
|
|
tamc_termod_s3.menu.FlashSize.8M.build.flash_size=8MB
|
|
tamc_termod_s3.menu.FlashSize.8M.build.partitions=default_8MB
|
|
tamc_termod_s3.menu.FlashSize.16M=16MB (128Mb)
|
|
tamc_termod_s3.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
tamc_termod_s3.menu.LoopCore.1=Core 1
|
|
tamc_termod_s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
tamc_termod_s3.menu.LoopCore.0=Core 0
|
|
tamc_termod_s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
tamc_termod_s3.menu.EventsCore.1=Core 1
|
|
tamc_termod_s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
tamc_termod_s3.menu.EventsCore.0=Core 0
|
|
tamc_termod_s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
tamc_termod_s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
tamc_termod_s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
tamc_termod_s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
tamc_termod_s3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
tamc_termod_s3.menu.CDCOnBoot.cdc=Enabled
|
|
tamc_termod_s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
tamc_termod_s3.menu.CDCOnBoot.default=Disabled
|
|
tamc_termod_s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
tamc_termod_s3.menu.MSCOnBoot.default=Disabled
|
|
tamc_termod_s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
tamc_termod_s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
tamc_termod_s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
tamc_termod_s3.menu.DFUOnBoot.default=Disabled
|
|
tamc_termod_s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
tamc_termod_s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
tamc_termod_s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
tamc_termod_s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
tamc_termod_s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
tamc_termod_s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
tamc_termod_s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
tamc_termod_s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
tamc_termod_s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
tamc_termod_s3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
tamc_termod_s3.menu.PartitionScheme.default.build.partitions=default
|
|
tamc_termod_s3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
tamc_termod_s3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
tamc_termod_s3.menu.PartitionScheme.default_8MB=8M Flash (3MB APP/1.5MB FAT)
|
|
tamc_termod_s3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
tamc_termod_s3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
tamc_termod_s3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
tamc_termod_s3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
tamc_termod_s3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
tamc_termod_s3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
tamc_termod_s3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
tamc_termod_s3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
tamc_termod_s3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
tamc_termod_s3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
tamc_termod_s3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
tamc_termod_s3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
tamc_termod_s3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
tamc_termod_s3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
tamc_termod_s3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
tamc_termod_s3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
tamc_termod_s3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
tamc_termod_s3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
tamc_termod_s3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
tamc_termod_s3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
tamc_termod_s3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
tamc_termod_s3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
tamc_termod_s3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
|
|
tamc_termod_s3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
tamc_termod_s3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
tamc_termod_s3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9MB FATFS)
|
|
tamc_termod_s3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
tamc_termod_s3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
tamc_termod_s3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
tamc_termod_s3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
tamc_termod_s3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
tamc_termod_s3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
tamc_termod_s3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
tamc_termod_s3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
tamc_termod_s3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
tamc_termod_s3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
tamc_termod_s3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
tamc_termod_s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
tamc_termod_s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
tamc_termod_s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
tamc_termod_s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
tamc_termod_s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
tamc_termod_s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
tamc_termod_s3.menu.CPUFreq.40=40MHz
|
|
tamc_termod_s3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
tamc_termod_s3.menu.CPUFreq.20=20MHz
|
|
tamc_termod_s3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
tamc_termod_s3.menu.CPUFreq.10=10MHz
|
|
tamc_termod_s3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
tamc_termod_s3.menu.UploadSpeed.921600=921600
|
|
tamc_termod_s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
tamc_termod_s3.menu.UploadSpeed.115200=115200
|
|
tamc_termod_s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
tamc_termod_s3.menu.UploadSpeed.256000.windows=256000
|
|
tamc_termod_s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
tamc_termod_s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
tamc_termod_s3.menu.UploadSpeed.230400=230400
|
|
tamc_termod_s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
tamc_termod_s3.menu.UploadSpeed.460800.linux=460800
|
|
tamc_termod_s3.menu.UploadSpeed.460800.macosx=460800
|
|
tamc_termod_s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
tamc_termod_s3.menu.UploadSpeed.512000.windows=512000
|
|
tamc_termod_s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
tamc_termod_s3.menu.DebugLevel.none=None
|
|
tamc_termod_s3.menu.DebugLevel.none.build.code_debug=0
|
|
tamc_termod_s3.menu.DebugLevel.error=Error
|
|
tamc_termod_s3.menu.DebugLevel.error.build.code_debug=1
|
|
tamc_termod_s3.menu.DebugLevel.warn=Warn
|
|
tamc_termod_s3.menu.DebugLevel.warn.build.code_debug=2
|
|
tamc_termod_s3.menu.DebugLevel.info=Info
|
|
tamc_termod_s3.menu.DebugLevel.info.build.code_debug=3
|
|
tamc_termod_s3.menu.DebugLevel.debug=Debug
|
|
tamc_termod_s3.menu.DebugLevel.debug.build.code_debug=4
|
|
tamc_termod_s3.menu.DebugLevel.verbose=Verbose
|
|
tamc_termod_s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
tamc_termod_s3.menu.EraseFlash.none=Disabled
|
|
tamc_termod_s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
tamc_termod_s3.menu.EraseFlash.all=Enabled
|
|
tamc_termod_s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
dpu_esp32.name=DPU ESP32
|
|
|
|
dpu_esp32.bootloader.tool=esptool_py
|
|
dpu_esp32.bootloader.tool.default=esptool_py
|
|
|
|
dpu_esp32.upload.tool=esptool_py
|
|
dpu_esp32.upload.tool.default=esptool_py
|
|
dpu_esp32.upload.tool.network=esp_ota
|
|
|
|
dpu_esp32.upload.maximum_size=3342336
|
|
dpu_esp32.upload.maximum_data_size=327680
|
|
dpu_esp32.upload.flags=
|
|
dpu_esp32.upload.extra_flags=
|
|
|
|
dpu_esp32.serial.disableDTR=true
|
|
dpu_esp32.serial.disableRTS=true
|
|
|
|
dpu_esp32.build.tarch=xtensa
|
|
dpu_esp32.build.bootloader_addr=0x1000
|
|
dpu_esp32.build.target=esp32
|
|
dpu_esp32.build.mcu=esp32
|
|
dpu_esp32.build.core=esp32
|
|
dpu_esp32.build.variant=dpu_esp32
|
|
dpu_esp32.build.board=DPU_ESP32
|
|
|
|
dpu_esp32.build.f_cpu=240000000L
|
|
dpu_esp32.build.flash_size=8MB
|
|
dpu_esp32.build.flash_freq=40m
|
|
dpu_esp32.build.flash_mode=dio
|
|
dpu_esp32.build.boot=dio
|
|
dpu_esp32.build.partitions=default_8MB
|
|
dpu_esp32.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
dpu_esp32.build.extra_libs=
|
|
|
|
dpu_esp32.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
dpu_esp32.menu.PartitionScheme.default.build.partitions=default
|
|
dpu_esp32.menu.PartitionScheme.default.upload.maximum_size=1310720
|
|
dpu_esp32.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
dpu_esp32.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
dpu_esp32.menu.PartitionScheme.defaultffat.upload.maximum_size=1310720
|
|
dpu_esp32.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
dpu_esp32.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
dpu_esp32.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
dpu_esp32.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
dpu_esp32.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
dpu_esp32.menu.PartitionScheme.minimal.upload.maximum_size=1310720
|
|
dpu_esp32.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
dpu_esp32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
dpu_esp32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
dpu_esp32.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
dpu_esp32.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
dpu_esp32.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
dpu_esp32.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
dpu_esp32.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
dpu_esp32.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
dpu_esp32.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
dpu_esp32.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
dpu_esp32.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
dpu_esp32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
dpu_esp32.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
dpu_esp32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
dpu_esp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
dpu_esp32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
dpu_esp32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
dpu_esp32.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
dpu_esp32.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
|
|
dpu_esp32.menu.FlashMode.qio=QIO
|
|
dpu_esp32.menu.FlashMode.qio.build.flash_mode=dio
|
|
dpu_esp32.menu.FlashMode.qio.build.boot=qio
|
|
dpu_esp32.menu.FlashMode.dio=DIO
|
|
dpu_esp32.menu.FlashMode.dio.build.flash_mode=dio
|
|
dpu_esp32.menu.FlashMode.dio.build.boot=dio
|
|
|
|
dpu_esp32.menu.FlashFreq.80=80MHz
|
|
dpu_esp32.menu.FlashFreq.80.build.flash_freq=80m
|
|
dpu_esp32.menu.FlashFreq.40=40MHz
|
|
dpu_esp32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
dpu_esp32.menu.UploadSpeed.921600=921600
|
|
dpu_esp32.menu.UploadSpeed.921600.upload.speed=921600
|
|
dpu_esp32.menu.UploadSpeed.115200=115200
|
|
dpu_esp32.menu.UploadSpeed.115200.upload.speed=115200
|
|
dpu_esp32.menu.UploadSpeed.256000.windows=256000
|
|
dpu_esp32.menu.UploadSpeed.256000.upload.speed=256000
|
|
dpu_esp32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
dpu_esp32.menu.UploadSpeed.230400=230400
|
|
dpu_esp32.menu.UploadSpeed.230400.upload.speed=230400
|
|
dpu_esp32.menu.UploadSpeed.460800.linux=460800
|
|
dpu_esp32.menu.UploadSpeed.460800.macosx=460800
|
|
dpu_esp32.menu.UploadSpeed.460800.upload.speed=460800
|
|
dpu_esp32.menu.UploadSpeed.512000.windows=512000
|
|
dpu_esp32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
dpu_esp32.menu.DebugLevel.none=None
|
|
dpu_esp32.menu.DebugLevel.none.build.code_debug=0
|
|
dpu_esp32.menu.DebugLevel.error=Error
|
|
dpu_esp32.menu.DebugLevel.error.build.code_debug=1
|
|
dpu_esp32.menu.DebugLevel.warn=Warn
|
|
dpu_esp32.menu.DebugLevel.warn.build.code_debug=2
|
|
dpu_esp32.menu.DebugLevel.info=Info
|
|
dpu_esp32.menu.DebugLevel.info.build.code_debug=3
|
|
dpu_esp32.menu.DebugLevel.debug=Debug
|
|
dpu_esp32.menu.DebugLevel.debug.build.code_debug=4
|
|
dpu_esp32.menu.DebugLevel.verbose=Verbose
|
|
dpu_esp32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
dpu_esp32.menu.EraseFlash.none=Disabled
|
|
dpu_esp32.menu.EraseFlash.none.upload.erase_cmd=
|
|
dpu_esp32.menu.EraseFlash.all=Enabled
|
|
dpu_esp32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
sonoff_dualr3.name=Sonoff DUALR3
|
|
|
|
sonoff_dualr3.bootloader.tool=esptool_py
|
|
sonoff_dualr3.bootloader.tool.default=esptool_py
|
|
|
|
sonoff_dualr3.upload.tool=esptool_py
|
|
sonoff_dualr3.upload.tool.default=esptool_py
|
|
sonoff_dualr3.upload.tool.network=esp_ota
|
|
|
|
sonoff_dualr3.upload.maximum_size=1310720
|
|
sonoff_dualr3.upload.maximum_data_size=327680
|
|
sonoff_dualr3.upload.flags=
|
|
sonoff_dualr3.upload.extra_flags=
|
|
|
|
sonoff_dualr3.serial.disableDTR=true
|
|
sonoff_dualr3.serial.disableRTS=true
|
|
|
|
sonoff_dualr3.build.tarch=xtensa
|
|
sonoff_dualr3.build.bootloader_addr=0x1000
|
|
sonoff_dualr3.build.target=esp32
|
|
sonoff_dualr3.build.mcu=esp32
|
|
sonoff_dualr3.build.core=esp32
|
|
sonoff_dualr3.build.variant=esp32
|
|
sonoff_dualr3.build.board=SONOFF_DUALR3
|
|
|
|
sonoff_dualr3.build.f_cpu=240000000L
|
|
sonoff_dualr3.build.flash_size=4MB
|
|
sonoff_dualr3.build.flash_freq=40m
|
|
sonoff_dualr3.build.flash_mode=dio
|
|
sonoff_dualr3.build.boot=dio
|
|
sonoff_dualr3.build.partitions=rainmaker
|
|
sonoff_dualr3.build.defines=
|
|
sonoff_dualr3.build.loop_core=
|
|
sonoff_dualr3.build.event_core=
|
|
|
|
sonoff_dualr3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
sonoff_dualr3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
sonoff_dualr3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
sonoff_dualr3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
sonoff_dualr3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
sonoff_dualr3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
|
|
sonoff_dualr3.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
sonoff_dualr3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
sonoff_dualr3.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
sonoff_dualr3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
sonoff_dualr3.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
sonoff_dualr3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
sonoff_dualr3.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
sonoff_dualr3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
sonoff_dualr3.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
sonoff_dualr3.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
sonoff_dualr3.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
sonoff_dualr3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
sonoff_dualr3.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
sonoff_dualr3.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
sonoff_dualr3.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
sonoff_dualr3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
sonoff_dualr3.menu.FlashMode.qio=QIO
|
|
sonoff_dualr3.menu.FlashMode.qio.build.flash_mode=dio
|
|
sonoff_dualr3.menu.FlashMode.qio.build.boot=qio
|
|
sonoff_dualr3.menu.FlashMode.dio=DIO
|
|
sonoff_dualr3.menu.FlashMode.dio.build.flash_mode=dio
|
|
sonoff_dualr3.menu.FlashMode.dio.build.boot=dio
|
|
|
|
sonoff_dualr3.menu.FlashFreq.80=80MHz
|
|
sonoff_dualr3.menu.FlashFreq.80.build.flash_freq=80m
|
|
sonoff_dualr3.menu.FlashFreq.40=40MHz
|
|
sonoff_dualr3.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
sonoff_dualr3.menu.FlashSize.4M=4MB (32Mb)
|
|
sonoff_dualr3.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
sonoff_dualr3.menu.UploadSpeed.921600=921600
|
|
sonoff_dualr3.menu.UploadSpeed.921600.upload.speed=921600
|
|
sonoff_dualr3.menu.UploadSpeed.115200=115200
|
|
sonoff_dualr3.menu.UploadSpeed.115200.upload.speed=115200
|
|
sonoff_dualr3.menu.UploadSpeed.256000.windows=256000
|
|
sonoff_dualr3.menu.UploadSpeed.256000.upload.speed=256000
|
|
sonoff_dualr3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
sonoff_dualr3.menu.UploadSpeed.230400=230400
|
|
sonoff_dualr3.menu.UploadSpeed.230400.upload.speed=230400
|
|
sonoff_dualr3.menu.UploadSpeed.460800.linux=460800
|
|
sonoff_dualr3.menu.UploadSpeed.460800.macosx=460800
|
|
sonoff_dualr3.menu.UploadSpeed.460800.upload.speed=460800
|
|
sonoff_dualr3.menu.UploadSpeed.512000.windows=512000
|
|
sonoff_dualr3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
sonoff_dualr3.menu.DebugLevel.none=None
|
|
sonoff_dualr3.menu.DebugLevel.none.build.code_debug=0
|
|
sonoff_dualr3.menu.DebugLevel.error=Error
|
|
sonoff_dualr3.menu.DebugLevel.error.build.code_debug=1
|
|
sonoff_dualr3.menu.DebugLevel.warn=Warn
|
|
sonoff_dualr3.menu.DebugLevel.warn.build.code_debug=2
|
|
sonoff_dualr3.menu.DebugLevel.info=Info
|
|
sonoff_dualr3.menu.DebugLevel.info.build.code_debug=3
|
|
sonoff_dualr3.menu.DebugLevel.debug=Debug
|
|
sonoff_dualr3.menu.DebugLevel.debug.build.code_debug=4
|
|
sonoff_dualr3.menu.DebugLevel.verbose=Verbose
|
|
sonoff_dualr3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
sonoff_dualr3.menu.EraseFlash.none=Disabled
|
|
sonoff_dualr3.menu.EraseFlash.none.upload.erase_cmd=
|
|
sonoff_dualr3.menu.EraseFlash.all=Enabled
|
|
sonoff_dualr3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
lionbit.name=Lion:Bit Dev Board
|
|
|
|
lionbit.bootloader.tool=esptool_py
|
|
lionbit.bootloader.tool.default=esptool_py
|
|
|
|
lionbit.upload.tool=esptool_py
|
|
lionbit.upload.tool.default=esptool_py
|
|
lionbit.upload.tool.network=esp_ota
|
|
|
|
lionbit.upload.maximum_size=1310720
|
|
lionbit.upload.maximum_data_size=327680
|
|
lionbit.upload.flags=
|
|
lionbit.upload.extra_flags=
|
|
|
|
lionbit.serial.disableDTR=true
|
|
lionbit.serial.disableRTS=true
|
|
|
|
lionbit.build.tarch=xtensa
|
|
lionbit.build.bootloader_addr=0x1000
|
|
lionbit.build.target=esp32
|
|
lionbit.build.mcu=esp32
|
|
lionbit.build.core=esp32
|
|
lionbit.build.variant=lionbit
|
|
lionbit.build.board=Lion:Bit_Dev_Board
|
|
|
|
lionbit.build.f_cpu=240000000L
|
|
lionbit.build.flash_size=4MB
|
|
lionbit.build.flash_freq=80m
|
|
lionbit.build.flash_mode=dio
|
|
lionbit.build.boot=dio
|
|
lionbit.build.partitions=default
|
|
lionbit.build.defines=
|
|
lionbit.build.loop_core=
|
|
lionbit.build.event_core=
|
|
|
|
|
|
lionbit.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
lionbit.menu.PartitionScheme.default.build.partitions=default
|
|
lionbit.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
lionbit.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
lionbit.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
lionbit.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
lionbit.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
lionbit.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
lionbit.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
lionbit.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
lionbit.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
lionbit.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
lionbit.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
lionbit.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
lionbit.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
lionbit.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
lionbit.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
lionbit.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
lionbit.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
lionbit.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
lionbit.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
lionbit.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
lionbit.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
lionbit.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
lionbit.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
lionbit.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
lionbit.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
lionbit.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
lionbit.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
lionbit.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
lionbit.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
lionbit.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
lionbit.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
lionbit.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
lionbit.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
lionbit.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
lionbit.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
lionbit.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
lionbit.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
|
|
lionbit.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
lionbit.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
lionbit.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
lionbit.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
lionbit.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
lionbit.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
lionbit.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
lionbit.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
lionbit.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
lionbit.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
lionbit.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
lionbit.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
lionbit.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
lionbit.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
lionbit.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
lionbit.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
|
|
lionbit.menu.FlashMode.dio=DIO
|
|
lionbit.menu.FlashMode.dio.build.flash_mode=dio
|
|
lionbit.menu.FlashMode.dio.build.boot=dio
|
|
lionbit.menu.FlashMode.qio=QIO
|
|
lionbit.menu.FlashMode.qio.build.flash_mode=dio
|
|
lionbit.menu.FlashMode.qio.build.boot=qio
|
|
|
|
lionbit.menu.FlashFreq.80=80MHz
|
|
lionbit.menu.FlashFreq.80.build.flash_freq=80m
|
|
lionbit.menu.FlashFreq.40=40MHz
|
|
lionbit.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
lionbit.menu.FlashSize.4M=4MB (32Mb)
|
|
lionbit.menu.FlashSize.4M.build.flash_size=4MB
|
|
lionbit.menu.FlashSize.4M.build.partitions=default
|
|
|
|
|
|
|
|
lionbit.menu.UploadSpeed.115200=115200
|
|
lionbit.menu.UploadSpeed.115200.upload.speed=115200
|
|
lionbit.menu.UploadSpeed.256000.windows=256000
|
|
lionbit.menu.UploadSpeed.256000.upload.speed=256000
|
|
lionbit.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
lionbit.menu.UploadSpeed.230400=230400
|
|
lionbit.menu.UploadSpeed.230400.upload.speed=230400
|
|
lionbit.menu.UploadSpeed.460800.linux=460800
|
|
lionbit.menu.UploadSpeed.460800.macosx=460800
|
|
lionbit.menu.UploadSpeed.460800.upload.speed=460800
|
|
|
|
|
|
lionbit.menu.LoopCore.1=Core 1
|
|
lionbit.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
lionbit.menu.LoopCore.0=Core 0
|
|
lionbit.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
lionbit.menu.EventsCore.1=Core 1
|
|
lionbit.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
lionbit.menu.EventsCore.0=Core 0
|
|
lionbit.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
lionbit.menu.DebugLevel.none=None
|
|
lionbit.menu.DebugLevel.none.build.code_debug=0
|
|
lionbit.menu.DebugLevel.error=Error
|
|
lionbit.menu.DebugLevel.error.build.code_debug=1
|
|
lionbit.menu.DebugLevel.warn=Warn
|
|
lionbit.menu.DebugLevel.warn.build.code_debug=2
|
|
lionbit.menu.DebugLevel.info=Info
|
|
lionbit.menu.DebugLevel.info.build.code_debug=3
|
|
lionbit.menu.DebugLevel.debug=Debug
|
|
lionbit.menu.DebugLevel.debug.build.code_debug=4
|
|
lionbit.menu.DebugLevel.verbose=Verbose
|
|
lionbit.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lionbit.menu.EraseFlash.none=Disabled
|
|
lionbit.menu.EraseFlash.none.upload.erase_cmd=
|
|
lionbit.menu.EraseFlash.all=Enabled
|
|
lionbit.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
watchy.name=Watchy
|
|
|
|
watchy.bootloader.tool=esptool_py
|
|
watchy.bootloader.tool.default=esptool_py
|
|
|
|
watchy.upload.tool=esptool_py
|
|
watchy.upload.tool.default=esptool_py
|
|
watchy.upload.tool.network=esp_ota
|
|
|
|
watchy.upload.maximum_size=1310720
|
|
watchy.upload.maximum_data_size=327680
|
|
watchy.upload.flags=
|
|
watchy.upload.extra_flags=
|
|
|
|
watchy.serial.disableDTR=true
|
|
watchy.serial.disableRTS=true
|
|
|
|
watchy.build.tarch=xtensa
|
|
watchy.build.bootloader_addr=0x1000
|
|
watchy.build.target=esp32
|
|
watchy.build.mcu=esp32
|
|
watchy.build.core=esp32
|
|
watchy.build.variant=watchy
|
|
watchy.build.board=WATCHY
|
|
|
|
watchy.build.f_cpu=240000000L
|
|
watchy.build.flash_size=4MB
|
|
watchy.build.flash_freq=80m
|
|
watchy.build.flash_mode=dio
|
|
watchy.build.boot=qio
|
|
watchy.build.partitions=min_spiffs
|
|
watchy.build.defines=
|
|
|
|
watchy.menu.Revision.v10=Watchy v1.0
|
|
watchy.menu.Revision.v10.build.board=WATCHY_V10
|
|
watchy.menu.Revision.v15=Watchy v1.5
|
|
watchy.menu.Revision.v15.build.board=WATCHY_V15
|
|
watchy.menu.Revision.v20=Watchy v2.0
|
|
watchy.menu.Revision.v20.build.board=WATCHY_V20
|
|
|
|
watchy.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
watchy.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
watchy.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
watchy.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
watchy.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
watchy.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
watchy.menu.UploadSpeed.921600=921600
|
|
watchy.menu.UploadSpeed.921600.upload.speed=921600
|
|
watchy.menu.UploadSpeed.115200=115200
|
|
watchy.menu.UploadSpeed.115200.upload.speed=115200
|
|
watchy.menu.UploadSpeed.256000.windows=256000
|
|
watchy.menu.UploadSpeed.256000.upload.speed=256000
|
|
watchy.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
watchy.menu.UploadSpeed.230400=230400
|
|
watchy.menu.UploadSpeed.230400.upload.speed=230400
|
|
watchy.menu.UploadSpeed.460800.linux=460800
|
|
watchy.menu.UploadSpeed.460800.macosx=460800
|
|
watchy.menu.UploadSpeed.460800.upload.speed=460800
|
|
watchy.menu.UploadSpeed.512000.windows=512000
|
|
watchy.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
watchy.menu.DebugLevel.none=None
|
|
watchy.menu.DebugLevel.none.build.code_debug=0
|
|
watchy.menu.DebugLevel.error=Error
|
|
watchy.menu.DebugLevel.error.build.code_debug=1
|
|
watchy.menu.DebugLevel.warn=Warn
|
|
watchy.menu.DebugLevel.warn.build.code_debug=2
|
|
watchy.menu.DebugLevel.info=Info
|
|
watchy.menu.DebugLevel.info.build.code_debug=3
|
|
watchy.menu.DebugLevel.debug=Debug
|
|
watchy.menu.DebugLevel.debug.build.code_debug=4
|
|
watchy.menu.DebugLevel.verbose=Verbose
|
|
watchy.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
watchy.menu.EraseFlash.none=Disabled
|
|
watchy.menu.EraseFlash.none.upload.erase_cmd=
|
|
watchy.menu.EraseFlash.all=Enabled
|
|
watchy.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
AirM2M_CORE_ESP32C3.name=AirM2M_CORE_ESP32C3
|
|
|
|
AirM2M_CORE_ESP32C3.upload.tool=esptool_py
|
|
AirM2M_CORE_ESP32C3.upload.tool.default=esptool_py
|
|
AirM2M_CORE_ESP32C3.upload.tool.network=esp_ota
|
|
AirM2M_CORE_ESP32C3.upload.maximum_size=1310720
|
|
AirM2M_CORE_ESP32C3.upload.maximum_data_size=327680
|
|
AirM2M_CORE_ESP32C3.upload.flags=
|
|
AirM2M_CORE_ESP32C3.upload.extra_flags=
|
|
AirM2M_CORE_ESP32C3.upload.use_1200bps_touch=false
|
|
AirM2M_CORE_ESP32C3.upload.wait_for_upload_port=false
|
|
|
|
AirM2M_CORE_ESP32C3.serial.disableDTR=false
|
|
AirM2M_CORE_ESP32C3.serial.disableRTS=false
|
|
|
|
AirM2M_CORE_ESP32C3.build.tarch=riscv32
|
|
AirM2M_CORE_ESP32C3.build.target=esp
|
|
AirM2M_CORE_ESP32C3.build.mcu=esp32c3
|
|
AirM2M_CORE_ESP32C3.build.core=esp32
|
|
AirM2M_CORE_ESP32C3.build.variant=AirM2M_CORE_ESP32C3
|
|
AirM2M_CORE_ESP32C3.build.board=AirM2M_CORE_ESP32C3
|
|
AirM2M_CORE_ESP32C3.build.bootloader_addr=0x0
|
|
|
|
AirM2M_CORE_ESP32C3.build.cdc_on_boot=0
|
|
AirM2M_CORE_ESP32C3.build.f_cpu=160000000L
|
|
AirM2M_CORE_ESP32C3.build.flash_size=4MB
|
|
AirM2M_CORE_ESP32C3.build.flash_freq=80m
|
|
AirM2M_CORE_ESP32C3.build.flash_mode=dio
|
|
AirM2M_CORE_ESP32C3.build.boot=dio
|
|
AirM2M_CORE_ESP32C3.build.partitions=default
|
|
AirM2M_CORE_ESP32C3.build.defines=
|
|
|
|
AirM2M_CORE_ESP32C3.menu.CDCOnBoot.default=Disabled
|
|
AirM2M_CORE_ESP32C3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
AirM2M_CORE_ESP32C3.menu.CDCOnBoot.cdc=Enabled
|
|
AirM2M_CORE_ESP32C3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.default.build.partitions=default
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
AirM2M_CORE_ESP32C3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
|
|
AirM2M_CORE_ESP32C3.menu.CPUFreq.160=160MHz (WiFi)
|
|
AirM2M_CORE_ESP32C3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
AirM2M_CORE_ESP32C3.menu.CPUFreq.80=80MHz (WiFi)
|
|
AirM2M_CORE_ESP32C3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
AirM2M_CORE_ESP32C3.menu.CPUFreq.40=40MHz
|
|
AirM2M_CORE_ESP32C3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
AirM2M_CORE_ESP32C3.menu.CPUFreq.20=20MHz
|
|
AirM2M_CORE_ESP32C3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
AirM2M_CORE_ESP32C3.menu.CPUFreq.10=10MHz
|
|
AirM2M_CORE_ESP32C3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
AirM2M_CORE_ESP32C3.menu.FlashFreq.80=80MHz
|
|
AirM2M_CORE_ESP32C3.menu.FlashFreq.80.build.flash_freq=80m
|
|
AirM2M_CORE_ESP32C3.menu.FlashFreq.40=40MHz
|
|
AirM2M_CORE_ESP32C3.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
AirM2M_CORE_ESP32C3.menu.UploadSpeed.921600=921600
|
|
AirM2M_CORE_ESP32C3.menu.UploadSpeed.921600.upload.speed=921600
|
|
AirM2M_CORE_ESP32C3.menu.UploadSpeed.115200=115200
|
|
AirM2M_CORE_ESP32C3.menu.UploadSpeed.115200.upload.speed=115200
|
|
AirM2M_CORE_ESP32C3.menu.UploadSpeed.1152000=1152000
|
|
AirM2M_CORE_ESP32C3.menu.UploadSpeed.1152000.upload.speed=1152000
|
|
|
|
|
|
AirM2M_CORE_ESP32C3.menu.DebugLevel.none=None
|
|
AirM2M_CORE_ESP32C3.menu.DebugLevel.none.build.code_debug=0
|
|
AirM2M_CORE_ESP32C3.menu.DebugLevel.error=Error
|
|
AirM2M_CORE_ESP32C3.menu.DebugLevel.error.build.code_debug=1
|
|
AirM2M_CORE_ESP32C3.menu.DebugLevel.warn=Warn
|
|
AirM2M_CORE_ESP32C3.menu.DebugLevel.warn.build.code_debug=2
|
|
AirM2M_CORE_ESP32C3.menu.DebugLevel.info=Info
|
|
AirM2M_CORE_ESP32C3.menu.DebugLevel.info.build.code_debug=3
|
|
AirM2M_CORE_ESP32C3.menu.DebugLevel.debug=Debug
|
|
AirM2M_CORE_ESP32C3.menu.DebugLevel.debug.build.code_debug=4
|
|
AirM2M_CORE_ESP32C3.menu.DebugLevel.verbose=Verbose
|
|
AirM2M_CORE_ESP32C3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
AirM2M_CORE_ESP32C3.menu.EraseFlash.none=Disabled
|
|
AirM2M_CORE_ESP32C3.menu.EraseFlash.none.upload.erase_cmd=
|
|
AirM2M_CORE_ESP32C3.menu.EraseFlash.all=Enabled
|
|
AirM2M_CORE_ESP32C3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
#############################################################
|
|
|
|
|
|
XIAO_ESP32C3.name=XIAO_ESP32C3
|
|
XIAO_ESP32C3.vid.0=0x2886
|
|
XIAO_ESP32C3.pid.0=0x0046
|
|
|
|
XIAO_ESP32C3.bootloader.tool=esptool_py
|
|
XIAO_ESP32C3.bootloader.tool.default=esptool_py
|
|
|
|
XIAO_ESP32C3.upload.tool=esptool_py
|
|
XIAO_ESP32C3.upload.tool.default=esptool_py
|
|
XIAO_ESP32C3.upload.tool.network=esp_ota
|
|
|
|
XIAO_ESP32C3.upload.maximum_size=1310720
|
|
XIAO_ESP32C3.upload.maximum_data_size=327680
|
|
XIAO_ESP32C3.upload.flags=
|
|
XIAO_ESP32C3.upload.extra_flags=
|
|
XIAO_ESP32C3.upload.use_1200bps_touch=false
|
|
XIAO_ESP32C3.upload.wait_for_upload_port=false
|
|
|
|
XIAO_ESP32C3.serial.disableDTR=false
|
|
XIAO_ESP32C3.serial.disableRTS=false
|
|
|
|
XIAO_ESP32C3.build.tarch=riscv32
|
|
XIAO_ESP32C3.build.target=esp
|
|
XIAO_ESP32C3.build.mcu=esp32c3
|
|
XIAO_ESP32C3.build.core=esp32
|
|
XIAO_ESP32C3.build.variant=XIAO_ESP32C3
|
|
XIAO_ESP32C3.build.board=XIAO_ESP32C3
|
|
XIAO_ESP32C3.build.bootloader_addr=0x0
|
|
|
|
XIAO_ESP32C3.build.cdc_on_boot=1
|
|
XIAO_ESP32C3.build.f_cpu=160000000L
|
|
XIAO_ESP32C3.build.flash_size=4MB
|
|
XIAO_ESP32C3.build.flash_freq=80m
|
|
XIAO_ESP32C3.build.flash_mode=qio
|
|
XIAO_ESP32C3.build.boot=qio
|
|
XIAO_ESP32C3.build.partitions=default
|
|
XIAO_ESP32C3.build.defines=
|
|
|
|
XIAO_ESP32C3.menu.CDCOnBoot.default=Enabled
|
|
XIAO_ESP32C3.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
XIAO_ESP32C3.menu.CDCOnBoot.cdc=Disabled
|
|
XIAO_ESP32C3.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
|
|
|
|
XIAO_ESP32C3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
XIAO_ESP32C3.menu.PartitionScheme.default.build.partitions=default
|
|
XIAO_ESP32C3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
XIAO_ESP32C3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
XIAO_ESP32C3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
XIAO_ESP32C3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
XIAO_ESP32C3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
XIAO_ESP32C3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
XIAO_ESP32C3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
XIAO_ESP32C3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
XIAO_ESP32C3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
XIAO_ESP32C3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
XIAO_ESP32C3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
XIAO_ESP32C3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
XIAO_ESP32C3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
XIAO_ESP32C3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
XIAO_ESP32C3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
XIAO_ESP32C3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
XIAO_ESP32C3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
XIAO_ESP32C3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
XIAO_ESP32C3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
XIAO_ESP32C3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
XIAO_ESP32C3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
XIAO_ESP32C3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
XIAO_ESP32C3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
XIAO_ESP32C3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
XIAO_ESP32C3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
XIAO_ESP32C3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
XIAO_ESP32C3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
XIAO_ESP32C3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
XIAO_ESP32C3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
XIAO_ESP32C3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
XIAO_ESP32C3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
XIAO_ESP32C3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
XIAO_ESP32C3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
XIAO_ESP32C3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
XIAO_ESP32C3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
XIAO_ESP32C3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
XIAO_ESP32C3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
XIAO_ESP32C3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
XIAO_ESP32C3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
XIAO_ESP32C3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
XIAO_ESP32C3.menu.CPUFreq.160=160MHz (WiFi)
|
|
XIAO_ESP32C3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
XIAO_ESP32C3.menu.CPUFreq.80=80MHz (WiFi)
|
|
XIAO_ESP32C3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
XIAO_ESP32C3.menu.CPUFreq.40=40MHz
|
|
XIAO_ESP32C3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
XIAO_ESP32C3.menu.CPUFreq.20=20MHz
|
|
XIAO_ESP32C3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
XIAO_ESP32C3.menu.CPUFreq.10=10MHz
|
|
XIAO_ESP32C3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
XIAO_ESP32C3.menu.FlashMode.qio=QIO
|
|
XIAO_ESP32C3.menu.FlashMode.qio.build.flash_mode=dio
|
|
XIAO_ESP32C3.menu.FlashMode.qio.build.boot=qio
|
|
XIAO_ESP32C3.menu.FlashMode.dio=DIO
|
|
XIAO_ESP32C3.menu.FlashMode.dio.build.flash_mode=dio
|
|
XIAO_ESP32C3.menu.FlashMode.dio.build.boot=dio
|
|
|
|
XIAO_ESP32C3.menu.FlashFreq.80=80MHz
|
|
XIAO_ESP32C3.menu.FlashFreq.80.build.flash_freq=80m
|
|
XIAO_ESP32C3.menu.FlashFreq.40=40MHz
|
|
XIAO_ESP32C3.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
XIAO_ESP32C3.menu.FlashSize.4M=4MB (32Mb)
|
|
XIAO_ESP32C3.menu.FlashSize.4M.build.flash_size=4MB
|
|
XIAO_ESP32C3.menu.FlashSize.8M=8MB (64Mb)
|
|
XIAO_ESP32C3.menu.FlashSize.8M.build.flash_size=8MB
|
|
XIAO_ESP32C3.menu.FlashSize.8M.build.partitions=default_8MB
|
|
XIAO_ESP32C3.menu.FlashSize.2M=2MB (16Mb)
|
|
XIAO_ESP32C3.menu.FlashSize.2M.build.flash_size=2MB
|
|
XIAO_ESP32C3.menu.FlashSize.2M.build.partitions=minimal
|
|
XIAO_ESP32C3.menu.FlashSize.16M=16MB (128Mb)
|
|
XIAO_ESP32C3.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
XIAO_ESP32C3.menu.UploadSpeed.921600=921600
|
|
XIAO_ESP32C3.menu.UploadSpeed.921600.upload.speed=921600
|
|
XIAO_ESP32C3.menu.UploadSpeed.115200=115200
|
|
XIAO_ESP32C3.menu.UploadSpeed.115200.upload.speed=115200
|
|
XIAO_ESP32C3.menu.UploadSpeed.256000.windows=256000
|
|
XIAO_ESP32C3.menu.UploadSpeed.256000.upload.speed=256000
|
|
XIAO_ESP32C3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
XIAO_ESP32C3.menu.UploadSpeed.230400=230400
|
|
XIAO_ESP32C3.menu.UploadSpeed.230400.upload.speed=230400
|
|
XIAO_ESP32C3.menu.UploadSpeed.460800.linux=460800
|
|
XIAO_ESP32C3.menu.UploadSpeed.460800.macosx=460800
|
|
XIAO_ESP32C3.menu.UploadSpeed.460800.upload.speed=460800
|
|
XIAO_ESP32C3.menu.UploadSpeed.512000.windows=512000
|
|
XIAO_ESP32C3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
XIAO_ESP32C3.menu.DebugLevel.none=None
|
|
XIAO_ESP32C3.menu.DebugLevel.none.build.code_debug=0
|
|
XIAO_ESP32C3.menu.DebugLevel.error=Error
|
|
XIAO_ESP32C3.menu.DebugLevel.error.build.code_debug=1
|
|
XIAO_ESP32C3.menu.DebugLevel.warn=Warn
|
|
XIAO_ESP32C3.menu.DebugLevel.warn.build.code_debug=2
|
|
XIAO_ESP32C3.menu.DebugLevel.info=Info
|
|
XIAO_ESP32C3.menu.DebugLevel.info.build.code_debug=3
|
|
XIAO_ESP32C3.menu.DebugLevel.debug=Debug
|
|
XIAO_ESP32C3.menu.DebugLevel.debug.build.code_debug=4
|
|
XIAO_ESP32C3.menu.DebugLevel.verbose=Verbose
|
|
XIAO_ESP32C3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
XIAO_ESP32C3.menu.EraseFlash.none=Disabled
|
|
XIAO_ESP32C3.menu.EraseFlash.none.upload.erase_cmd=
|
|
XIAO_ESP32C3.menu.EraseFlash.all=Enabled
|
|
XIAO_ESP32C3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
XIAO_ESP32C6.name=XIAO_ESP32C6
|
|
|
|
XIAO_ESP32C6.bootloader.tool=esptool_py
|
|
XIAO_ESP32C6.bootloader.tool.default=esptool_py
|
|
|
|
XIAO_ESP32C6.upload.tool=esptool_py
|
|
XIAO_ESP32C6.upload.tool.default=esptool_py
|
|
XIAO_ESP32C6.upload.tool.network=esp_ota
|
|
|
|
XIAO_ESP32C6.upload.maximum_size=1310720
|
|
XIAO_ESP32C6.upload.maximum_data_size=327680
|
|
XIAO_ESP32C6.upload.flags=
|
|
XIAO_ESP32C6.upload.extra_flags=
|
|
XIAO_ESP32C6.upload.use_1200bps_touch=false
|
|
XIAO_ESP32C6.upload.wait_for_upload_port=false
|
|
|
|
XIAO_ESP32C6.serial.disableDTR=false
|
|
XIAO_ESP32C6.serial.disableRTS=false
|
|
|
|
XIAO_ESP32C6.build.tarch=riscv32
|
|
XIAO_ESP32C6.build.target=esp
|
|
XIAO_ESP32C6.build.mcu=esp32c6
|
|
XIAO_ESP32C6.build.core=esp32
|
|
XIAO_ESP32C6.build.variant=XIAO_ESP32C6
|
|
XIAO_ESP32C6.build.board=XIAO_ESP32C6
|
|
XIAO_ESP32C6.build.bootloader_addr=0x0
|
|
|
|
XIAO_ESP32C6.build.cdc_on_boot=1
|
|
XIAO_ESP32C6.build.f_cpu=160000000L
|
|
XIAO_ESP32C6.build.flash_size=4MB
|
|
XIAO_ESP32C6.build.flash_freq=80m
|
|
XIAO_ESP32C6.build.flash_mode=qio
|
|
XIAO_ESP32C6.build.boot=qio
|
|
XIAO_ESP32C6.build.partitions=default
|
|
XIAO_ESP32C6.build.defines=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
XIAO_ESP32C6.menu.JTAGAdapter.default=Disabled
|
|
XIAO_ESP32C6.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
XIAO_ESP32C6.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
XIAO_ESP32C6.menu.JTAGAdapter.builtin.build.openocdscript=esp32c6-builtin.cfg
|
|
XIAO_ESP32C6.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
XIAO_ESP32C6.menu.JTAGAdapter.external=FTDI Adapter
|
|
XIAO_ESP32C6.menu.JTAGAdapter.external.build.openocdscript=esp32c6-ftdi.cfg
|
|
XIAO_ESP32C6.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
XIAO_ESP32C6.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
XIAO_ESP32C6.menu.JTAGAdapter.bridge.build.openocdscript=esp32c6-bridge.cfg
|
|
XIAO_ESP32C6.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
XIAO_ESP32C6.menu.CDCOnBoot.cdc=Enabled
|
|
XIAO_ESP32C6.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
XIAO_ESP32C6.menu.CDCOnBoot.default=Disabled
|
|
XIAO_ESP32C6.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
XIAO_ESP32C6.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
XIAO_ESP32C6.menu.PartitionScheme.default.build.partitions=default
|
|
XIAO_ESP32C6.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
XIAO_ESP32C6.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
XIAO_ESP32C6.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
XIAO_ESP32C6.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
XIAO_ESP32C6.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
XIAO_ESP32C6.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
XIAO_ESP32C6.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
XIAO_ESP32C6.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
XIAO_ESP32C6.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
XIAO_ESP32C6.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
XIAO_ESP32C6.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
XIAO_ESP32C6.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
XIAO_ESP32C6.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
XIAO_ESP32C6.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
XIAO_ESP32C6.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
XIAO_ESP32C6.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
XIAO_ESP32C6.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
XIAO_ESP32C6.menu.PartitionScheme.zigbee=Zigbee 4MB with spiffs
|
|
XIAO_ESP32C6.menu.PartitionScheme.zigbee.build.partitions=zigbee
|
|
XIAO_ESP32C6.menu.PartitionScheme.zigbee.upload.maximum_size=1310720
|
|
XIAO_ESP32C6.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
XIAO_ESP32C6.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
XIAO_ESP32C6.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
|
|
XIAO_ESP32C6.menu.CPUFreq.160=160MHz (WiFi)
|
|
XIAO_ESP32C6.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
XIAO_ESP32C6.menu.CPUFreq.80=80MHz (WiFi)
|
|
XIAO_ESP32C6.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
XIAO_ESP32C6.menu.CPUFreq.40=40MHz
|
|
XIAO_ESP32C6.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
XIAO_ESP32C6.menu.CPUFreq.20=20MHz
|
|
XIAO_ESP32C6.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
XIAO_ESP32C6.menu.CPUFreq.10=10MHz
|
|
XIAO_ESP32C6.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
XIAO_ESP32C6.menu.FlashMode.qio=QIO
|
|
XIAO_ESP32C6.menu.FlashMode.qio.build.flash_mode=dio
|
|
XIAO_ESP32C6.menu.FlashMode.qio.build.boot=qio
|
|
XIAO_ESP32C6.menu.FlashMode.dio=DIO
|
|
XIAO_ESP32C6.menu.FlashMode.dio.build.flash_mode=dio
|
|
XIAO_ESP32C6.menu.FlashMode.dio.build.boot=dio
|
|
|
|
XIAO_ESP32C6.menu.FlashFreq.80=80MHz
|
|
XIAO_ESP32C6.menu.FlashFreq.80.build.flash_freq=80m
|
|
XIAO_ESP32C6.menu.FlashFreq.40=40MHz
|
|
XIAO_ESP32C6.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
XIAO_ESP32C6.menu.FlashSize.4M=4MB (32Mb)
|
|
XIAO_ESP32C6.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
XIAO_ESP32C6.menu.UploadSpeed.921600=921600
|
|
XIAO_ESP32C6.menu.UploadSpeed.921600.upload.speed=921600
|
|
XIAO_ESP32C6.menu.UploadSpeed.115200=115200
|
|
XIAO_ESP32C6.menu.UploadSpeed.115200.upload.speed=115200
|
|
XIAO_ESP32C6.menu.UploadSpeed.256000.windows=256000
|
|
XIAO_ESP32C6.menu.UploadSpeed.256000.upload.speed=256000
|
|
XIAO_ESP32C6.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
XIAO_ESP32C6.menu.UploadSpeed.230400=230400
|
|
XIAO_ESP32C6.menu.UploadSpeed.230400.upload.speed=230400
|
|
XIAO_ESP32C6.menu.UploadSpeed.460800.linux=460800
|
|
XIAO_ESP32C6.menu.UploadSpeed.460800.macosx=460800
|
|
XIAO_ESP32C6.menu.UploadSpeed.460800.upload.speed=460800
|
|
XIAO_ESP32C6.menu.UploadSpeed.512000.windows=512000
|
|
XIAO_ESP32C6.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
XIAO_ESP32C6.menu.DebugLevel.none=None
|
|
XIAO_ESP32C6.menu.DebugLevel.none.build.code_debug=0
|
|
XIAO_ESP32C6.menu.DebugLevel.error=Error
|
|
XIAO_ESP32C6.menu.DebugLevel.error.build.code_debug=1
|
|
XIAO_ESP32C6.menu.DebugLevel.warn=Warn
|
|
XIAO_ESP32C6.menu.DebugLevel.warn.build.code_debug=2
|
|
XIAO_ESP32C6.menu.DebugLevel.info=Info
|
|
XIAO_ESP32C6.menu.DebugLevel.info.build.code_debug=3
|
|
XIAO_ESP32C6.menu.DebugLevel.debug=Debug
|
|
XIAO_ESP32C6.menu.DebugLevel.debug.build.code_debug=4
|
|
XIAO_ESP32C6.menu.DebugLevel.verbose=Verbose
|
|
XIAO_ESP32C6.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
XIAO_ESP32C6.menu.EraseFlash.none=Disabled
|
|
XIAO_ESP32C6.menu.EraseFlash.none.upload.erase_cmd=
|
|
XIAO_ESP32C6.menu.EraseFlash.all=Enabled
|
|
XIAO_ESP32C6.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
XIAO_ESP32C6.menu.ZigbeeMode.default=Disabled
|
|
XIAO_ESP32C6.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
XIAO_ESP32C6.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
XIAO_ESP32C6.menu.ZigbeeMode.ed=Zigbee ED (end device)
|
|
XIAO_ESP32C6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
|
|
XIAO_ESP32C6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
|
|
XIAO_ESP32C6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
XIAO_ESP32C6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
XIAO_ESP32C6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
XIAO_ESP32C6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
|
|
XIAO_ESP32C6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
|
|
XIAO_ESP32C6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
XIAO_ESP32S3.name=XIAO_ESP32S3
|
|
XIAO_ESP32S3.vid.0=0x2886
|
|
XIAO_ESP32S3.pid.0=0x0056
|
|
XIAO_ESP32S3.vid.1=0x2886
|
|
XIAO_ESP32S3.pid.1=0x8056
|
|
|
|
XIAO_ESP32S3.bootloader.tool=esptool_py
|
|
XIAO_ESP32S3.bootloader.tool.default=esptool_py
|
|
|
|
XIAO_ESP32S3.upload.tool=esptool_py
|
|
XIAO_ESP32S3.upload.tool.default=esptool_py
|
|
XIAO_ESP32S3.upload.tool.network=esp_ota
|
|
|
|
XIAO_ESP32S3.upload.maximum_size=1310720
|
|
XIAO_ESP32S3.upload.maximum_data_size=327680
|
|
XIAO_ESP32S3.upload.flags=
|
|
XIAO_ESP32S3.upload.extra_flags=
|
|
XIAO_ESP32S3.upload.use_1200bps_touch=false
|
|
XIAO_ESP32S3.upload.wait_for_upload_port=false
|
|
|
|
XIAO_ESP32S3.serial.disableDTR=false
|
|
XIAO_ESP32S3.serial.disableRTS=false
|
|
|
|
XIAO_ESP32S3.build.tarch=xtensa
|
|
XIAO_ESP32S3.build.bootloader_addr=0x0
|
|
XIAO_ESP32S3.build.target=esp32s3
|
|
XIAO_ESP32S3.build.mcu=esp32s3
|
|
XIAO_ESP32S3.build.core=esp32
|
|
XIAO_ESP32S3.build.variant=XIAO_ESP32S3
|
|
XIAO_ESP32S3.build.board=XIAO_ESP32S3
|
|
|
|
XIAO_ESP32S3.build.usb_mode=0
|
|
XIAO_ESP32S3.build.cdc_on_boot=1
|
|
XIAO_ESP32S3.build.msc_on_boot=0
|
|
XIAO_ESP32S3.build.dfu_on_boot=0
|
|
XIAO_ESP32S3.build.f_cpu=240000000L
|
|
XIAO_ESP32S3.build.flash_size=8MB
|
|
XIAO_ESP32S3.build.flash_freq=80m
|
|
XIAO_ESP32S3.build.flash_mode=dio
|
|
XIAO_ESP32S3.build.boot=qio
|
|
XIAO_ESP32S3.build.boot_freq=80m
|
|
XIAO_ESP32S3.build.partitions=default_8MB
|
|
XIAO_ESP32S3.build.defines=
|
|
XIAO_ESP32S3.build.loop_core=
|
|
XIAO_ESP32S3.build.event_core=
|
|
XIAO_ESP32S3.build.psram_type=qspi
|
|
XIAO_ESP32S3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
XIAO_ESP32S3.menu.JTAGAdapter.default=Disabled
|
|
XIAO_ESP32S3.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
XIAO_ESP32S3.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
XIAO_ESP32S3.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
XIAO_ESP32S3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
XIAO_ESP32S3.menu.JTAGAdapter.external=FTDI Adapter
|
|
XIAO_ESP32S3.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
XIAO_ESP32S3.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
XIAO_ESP32S3.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
XIAO_ESP32S3.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
XIAO_ESP32S3.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
XIAO_ESP32S3.menu.PSRAM.disabled=Disabled
|
|
XIAO_ESP32S3.menu.PSRAM.disabled.build.defines=
|
|
XIAO_ESP32S3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
XIAO_ESP32S3.menu.PSRAM.opi=OPI PSRAM
|
|
XIAO_ESP32S3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
XIAO_ESP32S3.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
XIAO_ESP32S3.menu.FlashMode.qio=QIO 80MHz
|
|
XIAO_ESP32S3.menu.FlashMode.qio.build.flash_mode=dio
|
|
XIAO_ESP32S3.menu.FlashMode.qio.build.boot=qio
|
|
XIAO_ESP32S3.menu.FlashMode.qio.build.boot_freq=80m
|
|
XIAO_ESP32S3.menu.FlashMode.qio.build.flash_freq=80m
|
|
XIAO_ESP32S3.menu.FlashMode.dio=DIO 80MHz
|
|
XIAO_ESP32S3.menu.FlashMode.dio.build.flash_mode=dio
|
|
XIAO_ESP32S3.menu.FlashMode.dio.build.boot=dio
|
|
XIAO_ESP32S3.menu.FlashMode.dio.build.boot_freq=80m
|
|
XIAO_ESP32S3.menu.FlashMode.dio.build.flash_freq=80m
|
|
|
|
XIAO_ESP32S3.menu.FlashSize.8M=8MB (64Mb)
|
|
XIAO_ESP32S3.menu.FlashSize.8M.build.flash_size=8MB
|
|
XIAO_ESP32S3.menu.FlashSize.8M.build.partitions=default_8MB
|
|
|
|
XIAO_ESP32S3.menu.LoopCore.1=Core 1
|
|
XIAO_ESP32S3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
XIAO_ESP32S3.menu.LoopCore.0=Core 0
|
|
XIAO_ESP32S3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
XIAO_ESP32S3.menu.EventsCore.1=Core 1
|
|
XIAO_ESP32S3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
XIAO_ESP32S3.menu.EventsCore.0=Core 0
|
|
XIAO_ESP32S3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
XIAO_ESP32S3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
XIAO_ESP32S3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
XIAO_ESP32S3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
XIAO_ESP32S3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
XIAO_ESP32S3.menu.CDCOnBoot.default=Enabled
|
|
XIAO_ESP32S3.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
XIAO_ESP32S3.menu.CDCOnBoot.cdc=Disabled
|
|
XIAO_ESP32S3.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
|
|
|
|
XIAO_ESP32S3.menu.MSCOnBoot.default=Disabled
|
|
XIAO_ESP32S3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
XIAO_ESP32S3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
XIAO_ESP32S3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
XIAO_ESP32S3.menu.DFUOnBoot.default=Disabled
|
|
XIAO_ESP32S3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
XIAO_ESP32S3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
XIAO_ESP32S3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
XIAO_ESP32S3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
XIAO_ESP32S3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
XIAO_ESP32S3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
XIAO_ESP32S3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
XIAO_ESP32S3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
XIAO_ESP32S3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
XIAO_ESP32S3.menu.PartitionScheme.default_8MB=Default with spiffs (3MB APP/1.5MB SPIFFS)
|
|
XIAO_ESP32S3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
XIAO_ESP32S3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
XIAO_ESP32S3.menu.PartitionScheme.max_app_8MB=Maximum APP (7.9MB APP No OTA/No FS)
|
|
XIAO_ESP32S3.menu.PartitionScheme.max_app_8MB.build.partitions=max_app_8MB
|
|
XIAO_ESP32S3.menu.PartitionScheme.max_app_8MB.upload.maximum_size=8257536
|
|
XIAO_ESP32S3.menu.PartitionScheme.tinyuf2=TinyUF2 8MB (2MB APP/3.7MB FFAT)
|
|
XIAO_ESP32S3.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
XIAO_ESP32S3.menu.PartitionScheme.tinyuf2.build.custom_partitions=partitions-8MB-tinyuf2
|
|
XIAO_ESP32S3.menu.PartitionScheme.tinyuf2.upload.maximum_size=2097152
|
|
XIAO_ESP32S3.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
|
|
XIAO_ESP32S3.menu.CPUFreq.240=240MHz (WiFi)
|
|
XIAO_ESP32S3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
XIAO_ESP32S3.menu.CPUFreq.160=160MHz (WiFi)
|
|
XIAO_ESP32S3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
XIAO_ESP32S3.menu.CPUFreq.80=80MHz (WiFi)
|
|
XIAO_ESP32S3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
XIAO_ESP32S3.menu.CPUFreq.40=40MHz
|
|
XIAO_ESP32S3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
XIAO_ESP32S3.menu.CPUFreq.20=20MHz
|
|
XIAO_ESP32S3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
XIAO_ESP32S3.menu.CPUFreq.10=10MHz
|
|
XIAO_ESP32S3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
XIAO_ESP32S3.menu.UploadSpeed.921600=921600
|
|
XIAO_ESP32S3.menu.UploadSpeed.921600.upload.speed=921600
|
|
XIAO_ESP32S3.menu.UploadSpeed.115200=115200
|
|
XIAO_ESP32S3.menu.UploadSpeed.115200.upload.speed=115200
|
|
XIAO_ESP32S3.menu.UploadSpeed.256000.windows=256000
|
|
XIAO_ESP32S3.menu.UploadSpeed.256000.upload.speed=256000
|
|
XIAO_ESP32S3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
XIAO_ESP32S3.menu.UploadSpeed.230400=230400
|
|
XIAO_ESP32S3.menu.UploadSpeed.230400.upload.speed=230400
|
|
XIAO_ESP32S3.menu.UploadSpeed.460800.linux=460800
|
|
XIAO_ESP32S3.menu.UploadSpeed.460800.macosx=460800
|
|
XIAO_ESP32S3.menu.UploadSpeed.460800.upload.speed=460800
|
|
XIAO_ESP32S3.menu.UploadSpeed.512000.windows=512000
|
|
XIAO_ESP32S3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
XIAO_ESP32S3.menu.DebugLevel.none=None
|
|
XIAO_ESP32S3.menu.DebugLevel.none.build.code_debug=0
|
|
XIAO_ESP32S3.menu.DebugLevel.error=Error
|
|
XIAO_ESP32S3.menu.DebugLevel.error.build.code_debug=1
|
|
XIAO_ESP32S3.menu.DebugLevel.warn=Warn
|
|
XIAO_ESP32S3.menu.DebugLevel.warn.build.code_debug=2
|
|
XIAO_ESP32S3.menu.DebugLevel.info=Info
|
|
XIAO_ESP32S3.menu.DebugLevel.info.build.code_debug=3
|
|
XIAO_ESP32S3.menu.DebugLevel.debug=Debug
|
|
XIAO_ESP32S3.menu.DebugLevel.debug.build.code_debug=4
|
|
XIAO_ESP32S3.menu.DebugLevel.verbose=Verbose
|
|
XIAO_ESP32S3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
XIAO_ESP32S3.menu.EraseFlash.none=Disabled
|
|
XIAO_ESP32S3.menu.EraseFlash.none.upload.erase_cmd=
|
|
XIAO_ESP32S3.menu.EraseFlash.all=Enabled
|
|
XIAO_ESP32S3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
connaxio_espoir.name=Connaxio's Espoir
|
|
connaxio_espoir.vid.0=0x10C4
|
|
connaxio_espoir.pid.0=0x8D9A
|
|
|
|
connaxio_espoir.bootloader.tool=esptool_py
|
|
connaxio_espoir.bootloader.tool.default=esptool_py
|
|
|
|
connaxio_espoir.upload.tool=esptool_py
|
|
connaxio_espoir.upload.tool.default=esptool_py
|
|
connaxio_espoir.upload.tool.network=esp_ota
|
|
|
|
connaxio_espoir.upload.maximum_size=1310720
|
|
connaxio_espoir.upload.maximum_data_size=327680
|
|
connaxio_espoir.upload.flags=
|
|
connaxio_espoir.upload.extra_flags=
|
|
|
|
connaxio_espoir.serial.disableDTR=true
|
|
connaxio_espoir.serial.disableRTS=true
|
|
|
|
connaxio_espoir.build.tarch=xtensa
|
|
connaxio_espoir.build.bootloader_addr=0x1000
|
|
connaxio_espoir.build.target=esp32
|
|
connaxio_espoir.build.mcu=esp32
|
|
connaxio_espoir.build.core=esp32
|
|
connaxio_espoir.build.variant=connaxio_espoir
|
|
connaxio_espoir.build.board=connaxio_espoir
|
|
|
|
connaxio_espoir.build.f_cpu=240000000L
|
|
connaxio_espoir.build.flash_size=4MB
|
|
connaxio_espoir.build.flash_freq=80m
|
|
connaxio_espoir.build.flash_mode=dio
|
|
connaxio_espoir.build.boot=dio
|
|
connaxio_espoir.build.partitions=default
|
|
connaxio_espoir.build.defines=
|
|
connaxio_espoir.build.loop_core=
|
|
connaxio_espoir.build.event_core=
|
|
|
|
connaxio_espoir.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
connaxio_espoir.menu.PartitionScheme.default.build.partitions=default
|
|
connaxio_espoir.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
connaxio_espoir.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
connaxio_espoir.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
connaxio_espoir.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
connaxio_espoir.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
connaxio_espoir.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
connaxio_espoir.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
connaxio_espoir.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
connaxio_espoir.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
connaxio_espoir.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
connaxio_espoir.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
connaxio_espoir.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
connaxio_espoir.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
connaxio_espoir.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
connaxio_espoir.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
connaxio_espoir.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
connaxio_espoir.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
connaxio_espoir.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
connaxio_espoir.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
connaxio_espoir.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
connaxio_espoir.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
connaxio_espoir.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
connaxio_espoir.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
connaxio_espoir.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
connaxio_espoir.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
connaxio_espoir.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
connaxio_espoir.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
connaxio_espoir.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
|
|
connaxio_espoir.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
connaxio_espoir.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
connaxio_espoir.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
connaxio_espoir.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
connaxio_espoir.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
connaxio_espoir.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
connaxio_espoir.menu.CPUFreq.40=40MHz
|
|
connaxio_espoir.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
connaxio_espoir.menu.CPUFreq.20=20MHz
|
|
connaxio_espoir.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
connaxio_espoir.menu.CPUFreq.10=10MHz
|
|
connaxio_espoir.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
connaxio_espoir.menu.FlashFreq.80=80MHz
|
|
connaxio_espoir.menu.FlashFreq.80.build.flash_freq=80m
|
|
connaxio_espoir.menu.FlashFreq.40=40MHz
|
|
connaxio_espoir.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
connaxio_espoir.menu.UploadSpeed.921600=921600
|
|
connaxio_espoir.menu.UploadSpeed.921600.upload.speed=921600
|
|
connaxio_espoir.menu.UploadSpeed.512000.windows=512000
|
|
connaxio_espoir.menu.UploadSpeed.512000.upload.speed=512000
|
|
connaxio_espoir.menu.UploadSpeed.460800.linux=460800
|
|
connaxio_espoir.menu.UploadSpeed.460800.macosx=460800
|
|
connaxio_espoir.menu.UploadSpeed.460800.upload.speed=460800
|
|
connaxio_espoir.menu.UploadSpeed.256000.windows=256000
|
|
connaxio_espoir.menu.UploadSpeed.256000.upload.speed=256000
|
|
connaxio_espoir.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
connaxio_espoir.menu.UploadSpeed.230400=230400
|
|
connaxio_espoir.menu.UploadSpeed.230400.upload.speed=230400
|
|
connaxio_espoir.menu.UploadSpeed.115200=115200
|
|
connaxio_espoir.menu.UploadSpeed.115200.upload.speed=115200
|
|
|
|
connaxio_espoir.menu.DebugLevel.none=None
|
|
connaxio_espoir.menu.DebugLevel.none.build.code_debug=0
|
|
connaxio_espoir.menu.DebugLevel.error=Error
|
|
connaxio_espoir.menu.DebugLevel.error.build.code_debug=1
|
|
connaxio_espoir.menu.DebugLevel.warn=Warn
|
|
connaxio_espoir.menu.DebugLevel.warn.build.code_debug=2
|
|
connaxio_espoir.menu.DebugLevel.info=Info
|
|
connaxio_espoir.menu.DebugLevel.info.build.code_debug=3
|
|
connaxio_espoir.menu.DebugLevel.debug=Debug
|
|
connaxio_espoir.menu.DebugLevel.debug.build.code_debug=4
|
|
connaxio_espoir.menu.DebugLevel.verbose=Verbose
|
|
connaxio_espoir.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
connaxio_espoir.menu.EraseFlash.none=Disabled
|
|
connaxio_espoir.menu.EraseFlash.none.upload.erase_cmd=
|
|
connaxio_espoir.menu.EraseFlash.all=Enabled
|
|
connaxio_espoir.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
aw2eth.name=CNRS AW2ETH
|
|
|
|
aw2eth.bootloader.tool=esptool_py
|
|
aw2eth.bootloader.tool.default=esptool_py
|
|
|
|
aw2eth.upload.tool=esptool_py
|
|
aw2eth.upload.tool.default=esptool_py
|
|
aw2eth.upload.tool.network=esp_ota
|
|
|
|
aw2eth.upload.maximum_size=1310720
|
|
aw2eth.upload.maximum_data_size=327680
|
|
aw2eth.upload.flags=
|
|
aw2eth.upload.extra_flags=
|
|
|
|
aw2eth.serial.disableDTR=true
|
|
aw2eth.serial.disableRTS=true
|
|
|
|
aw2eth.build.tarch=xtensa
|
|
aw2eth.build.bootloader_addr=0x1000
|
|
aw2eth.build.target=esp32
|
|
aw2eth.build.mcu=esp32
|
|
aw2eth.build.core=esp32
|
|
aw2eth.build.variant=cnrs_aw2eth
|
|
aw2eth.build.board=ESP32_PICO
|
|
|
|
aw2eth.build.f_cpu=240000000L
|
|
aw2eth.build.flash_size=4MB
|
|
aw2eth.build.flash_freq=80m
|
|
aw2eth.build.flash_mode=dio
|
|
aw2eth.build.boot=dio
|
|
aw2eth.build.partitions=default
|
|
aw2eth.build.defines=
|
|
|
|
aw2eth.menu.PartitionScheme.default=Default
|
|
aw2eth.menu.PartitionScheme.default.build.partitions=default
|
|
aw2eth.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
aw2eth.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
aw2eth.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
aw2eth.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
aw2eth.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
aw2eth.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
aw2eth.menu.UploadSpeed.921600=921600
|
|
aw2eth.menu.UploadSpeed.921600.upload.speed=921600
|
|
aw2eth.menu.UploadSpeed.115200=115200
|
|
aw2eth.menu.UploadSpeed.115200.upload.speed=115200
|
|
aw2eth.menu.UploadSpeed.256000.windows=256000
|
|
aw2eth.menu.UploadSpeed.256000.upload.speed=256000
|
|
aw2eth.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
aw2eth.menu.UploadSpeed.230400=230400
|
|
aw2eth.menu.UploadSpeed.230400.upload.speed=230400
|
|
aw2eth.menu.UploadSpeed.460800.linux=460800
|
|
aw2eth.menu.UploadSpeed.460800.macosx=460800
|
|
aw2eth.menu.UploadSpeed.460800.upload.speed=460800
|
|
aw2eth.menu.UploadSpeed.512000.windows=512000
|
|
aw2eth.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
aw2eth.menu.DebugLevel.none=None
|
|
aw2eth.menu.DebugLevel.none.build.code_debug=0
|
|
aw2eth.menu.DebugLevel.error=Error
|
|
aw2eth.menu.DebugLevel.error.build.code_debug=1
|
|
aw2eth.menu.DebugLevel.warn=Warn
|
|
aw2eth.menu.DebugLevel.warn.build.code_debug=2
|
|
aw2eth.menu.DebugLevel.info=Info
|
|
aw2eth.menu.DebugLevel.info.build.code_debug=3
|
|
aw2eth.menu.DebugLevel.debug=Debug
|
|
aw2eth.menu.DebugLevel.debug.build.code_debug=4
|
|
aw2eth.menu.DebugLevel.verbose=Verbose
|
|
aw2eth.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
aw2eth.menu.EraseFlash.none=Disabled
|
|
aw2eth.menu.EraseFlash.none.upload.erase_cmd=
|
|
aw2eth.menu.EraseFlash.all=Enabled
|
|
aw2eth.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
department_of_alchemy_minimain_esp32s2.name=Department of Alchemy MiniMain ESP32-S2
|
|
department_of_alchemy_minimain_esp32s2.vid.0=0x303A
|
|
department_of_alchemy_minimain_esp32s2.pid.0=0x80FF
|
|
|
|
department_of_alchemy_minimain_esp32s2.bootloader.tool=esptool_py
|
|
department_of_alchemy_minimain_esp32s2.bootloader.tool.default=esptool_py
|
|
|
|
department_of_alchemy_minimain_esp32s2.upload.tool=esptool_py
|
|
department_of_alchemy_minimain_esp32s2.upload.tool.default=esptool_py
|
|
department_of_alchemy_minimain_esp32s2.upload.tool.network=esp_ota
|
|
|
|
department_of_alchemy_minimain_esp32s2.upload.maximum_size=1310720
|
|
department_of_alchemy_minimain_esp32s2.upload.maximum_data_size=327680
|
|
department_of_alchemy_minimain_esp32s2.upload.flags=
|
|
department_of_alchemy_minimain_esp32s2.upload.extra_flags=
|
|
department_of_alchemy_minimain_esp32s2.upload.use_1200bps_touch=true
|
|
department_of_alchemy_minimain_esp32s2.upload.wait_for_upload_port=true
|
|
|
|
department_of_alchemy_minimain_esp32s2.serial.disableDTR=false
|
|
department_of_alchemy_minimain_esp32s2.serial.disableRTS=false
|
|
|
|
department_of_alchemy_minimain_esp32s2.build.tarch=xtensa
|
|
department_of_alchemy_minimain_esp32s2.build.bootloader_addr=0x1000
|
|
department_of_alchemy_minimain_esp32s2.build.target=esp32s2
|
|
department_of_alchemy_minimain_esp32s2.build.mcu=esp32s2
|
|
department_of_alchemy_minimain_esp32s2.build.core=esp32
|
|
department_of_alchemy_minimain_esp32s2.build.variant=department_of_alchemy_minimain_esp32s2
|
|
department_of_alchemy_minimain_esp32s2.build.board=DEPARTMENT_OF_ALCHEMY_MINIMAIN_ESP32S2
|
|
|
|
department_of_alchemy_minimain_esp32s2.build.cdc_on_boot=1
|
|
department_of_alchemy_minimain_esp32s2.build.msc_on_boot=0
|
|
department_of_alchemy_minimain_esp32s2.build.dfu_on_boot=0
|
|
department_of_alchemy_minimain_esp32s2.build.f_cpu=240000000L
|
|
department_of_alchemy_minimain_esp32s2.build.flash_size=4MB
|
|
department_of_alchemy_minimain_esp32s2.build.flash_freq=80m
|
|
department_of_alchemy_minimain_esp32s2.build.flash_mode=qio
|
|
department_of_alchemy_minimain_esp32s2.build.boot=qio
|
|
department_of_alchemy_minimain_esp32s2.build.partitions=default
|
|
department_of_alchemy_minimain_esp32s2.build.defines=
|
|
|
|
department_of_alchemy_minimain_esp32s2.menu.CDCOnBoot.cdc=Enabled
|
|
department_of_alchemy_minimain_esp32s2.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
department_of_alchemy_minimain_esp32s2.menu.CDCOnBoot.default=Disabled
|
|
department_of_alchemy_minimain_esp32s2.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
department_of_alchemy_minimain_esp32s2.menu.MSCOnBoot.default=Disabled
|
|
department_of_alchemy_minimain_esp32s2.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
department_of_alchemy_minimain_esp32s2.menu.MSCOnBoot.msc=Enabled
|
|
department_of_alchemy_minimain_esp32s2.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
department_of_alchemy_minimain_esp32s2.menu.DFUOnBoot.default=Disabled
|
|
department_of_alchemy_minimain_esp32s2.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
department_of_alchemy_minimain_esp32s2.menu.DFUOnBoot.dfu=Enabled
|
|
department_of_alchemy_minimain_esp32s2.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadMode.cdc=Internal USB
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadMode.default=UART0
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
department_of_alchemy_minimain_esp32s2.menu.PSRAM.enabled=Enabled
|
|
department_of_alchemy_minimain_esp32s2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
department_of_alchemy_minimain_esp32s2.menu.PSRAM.disabled=Disabled
|
|
department_of_alchemy_minimain_esp32s2.menu.PSRAM.disabled.build.defines=
|
|
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.tinyuf2=TinyUF2 4MB (1.3MB APP/960KB FFAT)
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.tinyuf2.build.custom_partitions=partitions-4MB-tinyuf2
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.tinyuf2.upload.maximum_size=1441792
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.default.build.partitions=default
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
department_of_alchemy_minimain_esp32s2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
department_of_alchemy_minimain_esp32s2.menu.CPUFreq.240=240MHz (WiFi)
|
|
department_of_alchemy_minimain_esp32s2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
department_of_alchemy_minimain_esp32s2.menu.CPUFreq.160=160MHz (WiFi)
|
|
department_of_alchemy_minimain_esp32s2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
department_of_alchemy_minimain_esp32s2.menu.CPUFreq.80=80MHz (WiFi)
|
|
department_of_alchemy_minimain_esp32s2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
department_of_alchemy_minimain_esp32s2.menu.CPUFreq.40=40MHz
|
|
department_of_alchemy_minimain_esp32s2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
department_of_alchemy_minimain_esp32s2.menu.CPUFreq.20=20MHz
|
|
department_of_alchemy_minimain_esp32s2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
department_of_alchemy_minimain_esp32s2.menu.CPUFreq.10=10MHz
|
|
department_of_alchemy_minimain_esp32s2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashMode.qio=QIO
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashMode.qio.build.flash_mode=dio
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashMode.qio.build.boot=qio
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashMode.dio=DIO
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashMode.dio.build.flash_mode=dio
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashMode.dio.build.boot=dio
|
|
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashFreq.80=80MHz
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashFreq.80.build.flash_freq=80m
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashFreq.40=40MHz
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashSize.4M=4MB (32Mb)
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashSize.4M.build.flash_size=4MB
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashSize.8M=8MB (64Mb)
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashSize.8M.build.flash_size=8MB
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashSize.8M.build.partitions=default_8MB
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashSize.2M=2MB (16Mb)
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashSize.2M.build.flash_size=2MB
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashSize.2M.build.partitions=minimal
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashSize.16M=16MB (128Mb)
|
|
department_of_alchemy_minimain_esp32s2.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadSpeed.921600=921600
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadSpeed.921600.upload.speed=921600
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadSpeed.115200=115200
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadSpeed.115200.upload.speed=115200
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadSpeed.256000.windows=256000
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadSpeed.256000.upload.speed=256000
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadSpeed.230400=230400
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadSpeed.230400.upload.speed=230400
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadSpeed.460800.linux=460800
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadSpeed.460800.macosx=460800
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadSpeed.460800.upload.speed=460800
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadSpeed.512000.windows=512000
|
|
department_of_alchemy_minimain_esp32s2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
department_of_alchemy_minimain_esp32s2.menu.DebugLevel.none=None
|
|
department_of_alchemy_minimain_esp32s2.menu.DebugLevel.none.build.code_debug=0
|
|
department_of_alchemy_minimain_esp32s2.menu.DebugLevel.error=Error
|
|
department_of_alchemy_minimain_esp32s2.menu.DebugLevel.error.build.code_debug=1
|
|
department_of_alchemy_minimain_esp32s2.menu.DebugLevel.warn=Warn
|
|
department_of_alchemy_minimain_esp32s2.menu.DebugLevel.warn.build.code_debug=2
|
|
department_of_alchemy_minimain_esp32s2.menu.DebugLevel.info=Info
|
|
department_of_alchemy_minimain_esp32s2.menu.DebugLevel.info.build.code_debug=3
|
|
department_of_alchemy_minimain_esp32s2.menu.DebugLevel.debug=Debug
|
|
department_of_alchemy_minimain_esp32s2.menu.DebugLevel.debug.build.code_debug=4
|
|
department_of_alchemy_minimain_esp32s2.menu.DebugLevel.verbose=Verbose
|
|
department_of_alchemy_minimain_esp32s2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
department_of_alchemy_minimain_esp32s2.menu.EraseFlash.none=Disabled
|
|
department_of_alchemy_minimain_esp32s2.menu.EraseFlash.none.upload.erase_cmd=
|
|
department_of_alchemy_minimain_esp32s2.menu.EraseFlash.all=Enabled
|
|
department_of_alchemy_minimain_esp32s2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
|
|
Bee_Data_Logger.name=Bee Data Logger
|
|
Bee_Data_Logger.vid.0=0x303a
|
|
Bee_Data_Logger.pid.0=0x815C
|
|
Bee_Data_Logger.upload_port.0.vid=0x303a
|
|
Bee_Data_Logger.upload_port.0.pid=0x815C
|
|
|
|
Bee_Data_Logger.bootloader.tool=esptool_py
|
|
Bee_Data_Logger.bootloader.tool.default=esptool_py
|
|
|
|
Bee_Data_Logger.upload.tool=esptool_py
|
|
Bee_Data_Logger.upload.tool.default=esptool_py
|
|
Bee_Data_Logger.upload.tool.network=esp_ota
|
|
|
|
Bee_Data_Logger.upload.maximum_size=1310720
|
|
Bee_Data_Logger.upload.maximum_data_size=327680
|
|
Bee_Data_Logger.upload.flags=
|
|
Bee_Data_Logger.upload.extra_flags=
|
|
Bee_Data_Logger.upload.use_1200bps_touch=true
|
|
Bee_Data_Logger.upload.wait_for_upload_port=true
|
|
Bee_Data_Logger.upload.speed=921600
|
|
|
|
Bee_Data_Logger.serial.disableDTR=false
|
|
Bee_Data_Logger.serial.disableRTS=false
|
|
|
|
Bee_Data_Logger.build.tarch=xtensa
|
|
Bee_Data_Logger.build.bootloader_addr=0x0
|
|
Bee_Data_Logger.build.target=esp32s3
|
|
Bee_Data_Logger.build.mcu=esp32s3
|
|
Bee_Data_Logger.build.core=esp32
|
|
Bee_Data_Logger.build.variant=Bee_Data_Logger
|
|
Bee_Data_Logger.build.board=BEE_DATA_LOGGER
|
|
|
|
Bee_Data_Logger.build.cdc_on_boot=1
|
|
Bee_Data_Logger.build.msc_on_boot=1
|
|
Bee_Data_Logger.build.dfu_on_boot=1
|
|
Bee_Data_Logger.build.f_cpu=240000000L
|
|
Bee_Data_Logger.build.flash_size=8MB
|
|
Bee_Data_Logger.build.flash_freq=80m
|
|
Bee_Data_Logger.build.flash_mode=dio
|
|
Bee_Data_Logger.build.partitions=default_8MB
|
|
Bee_Data_Logger.build.defines=
|
|
Bee_Data_Logger.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
Bee_Data_Logger.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
Bee_Data_Logger.build.boot=qio
|
|
Bee_Data_Logger.build.partitions=default
|
|
Bee_Data_Logger.build.defines=
|
|
|
|
Bee_Data_Logger.menu.CDCOnBoot.default=Enabled
|
|
Bee_Data_Logger.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
Bee_Data_Logger.menu.CDCOnBoot.dis_cdc=Disabled
|
|
Bee_Data_Logger.menu.CDCOnBoot.dis_cdc.build.cdc_on_boot=0
|
|
|
|
Bee_Data_Logger.menu.MSCOnBoot.default=Disabled
|
|
Bee_Data_Logger.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
Bee_Data_Logger.menu.MSCOnBoot.msc=Enabled
|
|
Bee_Data_Logger.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
Bee_Data_Logger.menu.DFUOnBoot.default=Disabled
|
|
Bee_Data_Logger.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
Bee_Data_Logger.menu.DFUOnBoot.dfu=Enabled
|
|
Bee_Data_Logger.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
Bee_Data_Logger.menu.USBMode.default=USB-OTG
|
|
Bee_Data_Logger.menu.USBMode.default.build.usb_mode=0
|
|
Bee_Data_Logger.menu.USBMode.default.upload.use_1200bps_touch=true
|
|
Bee_Data_Logger.menu.USBMode.default.upload.wait_for_upload_port=true
|
|
Bee_Data_Logger.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
Bee_Data_Logger.menu.USBMode.hwcdc.build.usb_mode=1
|
|
Bee_Data_Logger.menu.USBMode.hwcdc.upload.use_1200bps_touch=false
|
|
Bee_Data_Logger.menu.USBMode.hwcdc.upload.wait_for_upload_port=false
|
|
|
|
Bee_Data_Logger.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
Bee_Data_Logger.menu.PartitionScheme.default.build.partitions=default
|
|
Bee_Data_Logger.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
Bee_Data_Logger.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
Bee_Data_Logger.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
Bee_Data_Logger.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
Bee_Data_Logger.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
Bee_Data_Logger.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
Bee_Data_Logger.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
Bee_Data_Logger.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
Bee_Data_Logger.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
Bee_Data_Logger.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
Bee_Data_Logger.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
Bee_Data_Logger.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
Bee_Data_Logger.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
Bee_Data_Logger.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
Bee_Data_Logger.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
Bee_Data_Logger.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
Bee_Data_Logger.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
|
|
Bee_Data_Logger.menu.DebugLevel.none=None
|
|
Bee_Data_Logger.menu.DebugLevel.none.build.code_debug=0
|
|
Bee_Data_Logger.menu.DebugLevel.error=Error
|
|
Bee_Data_Logger.menu.DebugLevel.error.build.code_debug=1
|
|
Bee_Data_Logger.menu.DebugLevel.warn=Warn
|
|
Bee_Data_Logger.menu.DebugLevel.warn.build.code_debug=2
|
|
Bee_Data_Logger.menu.DebugLevel.info=Info
|
|
Bee_Data_Logger.menu.DebugLevel.info.build.code_debug=3
|
|
Bee_Data_Logger.menu.DebugLevel.debug=Debug
|
|
Bee_Data_Logger.menu.DebugLevel.debug.build.code_debug=4
|
|
Bee_Data_Logger.menu.DebugLevel.verbose=Verbose
|
|
Bee_Data_Logger.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
Bee_Data_Logger.menu.EraseFlash.none=Disabled
|
|
Bee_Data_Logger.menu.EraseFlash.none.upload.erase_cmd=
|
|
Bee_Data_Logger.menu.EraseFlash.all=Enabled
|
|
Bee_Data_Logger.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
############################################################
|
|
|
|
Bee_Motion_S3.name=Bee Motion S3
|
|
Bee_Motion_S3.vid.0=0x303a
|
|
Bee_Motion_S3.pid.0=0x8113
|
|
Bee_Motion_S3.upload_port.0.vid=0x303a
|
|
Bee_Motion_S3.upload_port.0.pid=0x8113
|
|
|
|
Bee_Motion_S3.bootloader.tool=esptool_py
|
|
Bee_Motion_S3.bootloader.tool.default=esptool_py
|
|
|
|
Bee_Motion_S3.upload.tool=esptool_py
|
|
Bee_Motion_S3.upload.tool.default=esptool_py
|
|
Bee_Motion_S3.upload.tool.network=esp_ota
|
|
|
|
Bee_Motion_S3.upload.maximum_size=1310720
|
|
Bee_Motion_S3.upload.maximum_data_size=327680
|
|
Bee_Motion_S3.upload.flags=
|
|
Bee_Motion_S3.upload.extra_flags=
|
|
Bee_Motion_S3.upload.use_1200bps_touch=true
|
|
Bee_Motion_S3.upload.wait_for_upload_port=true
|
|
Bee_Motion_S3.upload.speed=921600
|
|
|
|
Bee_Motion_S3.serial.disableDTR=false
|
|
Bee_Motion_S3.serial.disableRTS=false
|
|
|
|
Bee_Motion_S3.build.tarch=xtensa
|
|
Bee_Motion_S3.build.bootloader_addr=0x0
|
|
Bee_Motion_S3.build.target=esp32s3
|
|
Bee_Motion_S3.build.mcu=esp32s3
|
|
Bee_Motion_S3.build.core=esp32
|
|
Bee_Motion_S3.build.variant=Bee_Motion_S3
|
|
Bee_Motion_S3.build.board=BeeMotionS3
|
|
|
|
Bee_Motion_S3.build.cdc_on_boot=1
|
|
Bee_Motion_S3.build.msc_on_boot=1
|
|
Bee_Motion_S3.build.dfu_on_boot=1
|
|
Bee_Motion_S3.build.f_cpu=240000000L
|
|
Bee_Motion_S3.build.flash_size=8MB
|
|
Bee_Motion_S3.build.flash_freq=80m
|
|
Bee_Motion_S3.build.flash_mode=dio
|
|
Bee_Motion_S3.build.partitions=default_8MB
|
|
Bee_Motion_S3.build.defines=
|
|
Bee_Motion_S3.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
Bee_Motion_S3.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
Bee_Motion_S3.build.boot=qio
|
|
Bee_Motion_S3.build.partitions=default
|
|
Bee_Motion_S3.build.defines=
|
|
|
|
Bee_Motion_S3.menu.CDCOnBoot.default=Enabled
|
|
Bee_Motion_S3.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
Bee_Motion_S3.menu.CDCOnBoot.dis_cdc=Disabled
|
|
Bee_Motion_S3.menu.CDCOnBoot.dis_cdc.build.cdc_on_boot=0
|
|
|
|
Bee_Motion_S3.menu.MSCOnBoot.default=Disabled
|
|
Bee_Motion_S3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
Bee_Motion_S3.menu.MSCOnBoot.msc=Enabled
|
|
Bee_Motion_S3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
Bee_Motion_S3.menu.DFUOnBoot.default=Disabled
|
|
Bee_Motion_S3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
Bee_Motion_S3.menu.DFUOnBoot.dfu=Enabled
|
|
Bee_Motion_S3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
Bee_Motion_S3.menu.USBMode.default=USB-OTG
|
|
Bee_Motion_S3.menu.USBMode.default.build.usb_mode=0
|
|
Bee_Motion_S3.menu.USBMode.default.upload.use_1200bps_touch=true
|
|
Bee_Motion_S3.menu.USBMode.default.upload.wait_for_upload_port=true
|
|
Bee_Motion_S3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
Bee_Motion_S3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
Bee_Motion_S3.menu.USBMode.hwcdc.upload.use_1200bps_touch=false
|
|
Bee_Motion_S3.menu.USBMode.hwcdc.upload.wait_for_upload_port=false
|
|
|
|
Bee_Motion_S3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
Bee_Motion_S3.menu.PartitionScheme.default.build.partitions=default
|
|
Bee_Motion_S3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
Bee_Motion_S3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
Bee_Motion_S3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
Bee_Motion_S3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
Bee_Motion_S3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
Bee_Motion_S3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
Bee_Motion_S3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
Bee_Motion_S3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
Bee_Motion_S3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
Bee_Motion_S3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
Bee_Motion_S3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
Bee_Motion_S3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
Bee_Motion_S3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
Bee_Motion_S3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
Bee_Motion_S3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
Bee_Motion_S3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
Bee_Motion_S3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
|
|
Bee_Motion_S3.menu.DebugLevel.none=None
|
|
Bee_Motion_S3.menu.DebugLevel.none.build.code_debug=0
|
|
Bee_Motion_S3.menu.DebugLevel.error=Error
|
|
Bee_Motion_S3.menu.DebugLevel.error.build.code_debug=1
|
|
Bee_Motion_S3.menu.DebugLevel.warn=Warn
|
|
Bee_Motion_S3.menu.DebugLevel.warn.build.code_debug=2
|
|
Bee_Motion_S3.menu.DebugLevel.info=Info
|
|
Bee_Motion_S3.menu.DebugLevel.info.build.code_debug=3
|
|
Bee_Motion_S3.menu.DebugLevel.debug=Debug
|
|
Bee_Motion_S3.menu.DebugLevel.debug.build.code_debug=4
|
|
Bee_Motion_S3.menu.DebugLevel.verbose=Verbose
|
|
Bee_Motion_S3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
Bee_Motion_S3.menu.EraseFlash.none=Disabled
|
|
Bee_Motion_S3.menu.EraseFlash.none.upload.erase_cmd=
|
|
Bee_Motion_S3.menu.EraseFlash.all=Enabled
|
|
Bee_Motion_S3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
########################################################################
|
|
|
|
Bee_Motion.name=Bee Motion
|
|
Bee_Motion.vid.0=0x303a
|
|
Bee_Motion.pid.0=0x810D
|
|
Bee_Motion.vid.upload_port.0.vid=0x303a
|
|
Bee_Motion.pid.upload_port.0.pid=0x810D
|
|
|
|
Bee_Motion.bootloader.tool=esptool_py
|
|
Bee_Motion.bootloader.tool.default=esptool_py
|
|
|
|
Bee_Motion.upload.tool=esptool_py
|
|
Bee_Motion.upload.tool.default=esptool_py
|
|
Bee_Motion.upload.tool.network=esp_ota
|
|
|
|
Bee_Motion.upload.maximum_size=1310720
|
|
Bee_Motion.upload.maximum_data_size=327680
|
|
Bee_Motion.upload.flags=
|
|
Bee_Motion.upload.extra_flags=
|
|
Bee_Motion.upload.use_1200bps_touch=true
|
|
Bee_Motion.upload.wait_for_upload_port=true
|
|
Bee_Motion.upload.speed=921600
|
|
|
|
Bee_Motion.serial.disableDTR=false
|
|
Bee_Motion.serial.disableRTS=false
|
|
|
|
Bee_Motion.build.tarch=xtensa
|
|
Bee_Motion.build.bootloader_addr=0x1000
|
|
Bee_Motion.build.target=esp32s2
|
|
Bee_Motion.build.mcu=esp32s2
|
|
Bee_Motion.build.core=esp32
|
|
Bee_Motion.build.variant=Bee_Motion
|
|
Bee_Motion.build.board=Bee_Motion
|
|
|
|
Bee_Motion.build.cdc_on_boot=1
|
|
Bee_Motion.build.msc_on_boot=1
|
|
Bee_Motion.build.dfu_on_boot=1
|
|
Bee_Motion.build.f_cpu=240000000L
|
|
Bee_Motion.build.flash_size=4MB
|
|
Bee_Motion.build.flash_freq=80m
|
|
Bee_Motion.build.flash_mode=dio
|
|
Bee_Motion.build.boot=qio
|
|
Bee_Motion.build.partitions=default
|
|
Bee_Motion.build.defines=
|
|
|
|
Bee_Motion.menu.CDCOnBoot.default=Enabled
|
|
Bee_Motion.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
Bee_Motion.menu.CDCOnBoot.dis_cdc=Disabled
|
|
Bee_Motion.menu.CDCOnBoot.dis_cdc.build.cdc_on_boot=0
|
|
|
|
Bee_Motion.menu.MSCOnBoot.default=Disabled
|
|
Bee_Motion.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
Bee_Motion.menu.MSCOnBoot.msc=Enabled
|
|
Bee_Motion.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
Bee_Motion.menu.DFUOnBoot.default=Disabled
|
|
Bee_Motion.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
Bee_Motion.menu.DFUOnBoot.dfu=Enabled
|
|
Bee_Motion.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
Bee_Motion.menu.USBMode.default=USB-OTG
|
|
Bee_Motion.menu.USBMode.default.build.usb_mode=0
|
|
Bee_Motion.menu.USBMode.default.upload.use_1200bps_touch=true
|
|
Bee_Motion.menu.USBMode.default.upload.wait_for_upload_port=true
|
|
Bee_Motion.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
Bee_Motion.menu.USBMode.hwcdc.build.usb_mode=1
|
|
Bee_Motion.menu.USBMode.hwcdc.upload.use_1200bps_touch=false
|
|
Bee_Motion.menu.USBMode.hwcdc.upload.wait_for_upload_port=false
|
|
|
|
Bee_Motion.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
Bee_Motion.menu.PartitionScheme.default.build.partitions=default
|
|
Bee_Motion.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
Bee_Motion.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
Bee_Motion.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
Bee_Motion.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
Bee_Motion.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
Bee_Motion.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
Bee_Motion.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
Bee_Motion.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
Bee_Motion.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
Bee_Motion.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
Bee_Motion.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
Bee_Motion.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
Bee_Motion.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
Bee_Motion.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
Bee_Motion.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
Bee_Motion.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
Bee_Motion.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
|
|
Bee_Motion.menu.DebugLevel.none=None
|
|
Bee_Motion.menu.DebugLevel.none.build.code_debug=0
|
|
Bee_Motion.menu.DebugLevel.error=Error
|
|
Bee_Motion.menu.DebugLevel.error.build.code_debug=1
|
|
Bee_Motion.menu.DebugLevel.warn=Warn
|
|
Bee_Motion.menu.DebugLevel.warn.build.code_debug=2
|
|
Bee_Motion.menu.DebugLevel.info=Info
|
|
Bee_Motion.menu.DebugLevel.info.build.code_debug=3
|
|
Bee_Motion.menu.DebugLevel.debug=Debug
|
|
Bee_Motion.menu.DebugLevel.debug.build.code_debug=4
|
|
Bee_Motion.menu.DebugLevel.verbose=Verbose
|
|
Bee_Motion.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
Bee_Motion.menu.EraseFlash.none=Disabled
|
|
Bee_Motion.menu.EraseFlash.none.upload.erase_cmd=
|
|
Bee_Motion.menu.EraseFlash.all=Enabled
|
|
Bee_Motion.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
#####################################################################
|
|
|
|
Bee_Motion_Mini.name=Bee Motion Mini
|
|
|
|
Bee_Motion_Mini.bootloader.tool=esptool_py
|
|
Bee_Motion_Mini.bootloader.tool.default=esptool_py
|
|
|
|
Bee_Motion_Mini.upload.tool=esptool_py
|
|
Bee_Motion_Mini.upload.tool.default=esptool_py
|
|
Bee_Motion_Mini.upload.tool.network=esp_ota
|
|
|
|
Bee_Motion_Mini.upload.maximum_size=1310720
|
|
Bee_Motion_Mini.upload.maximum_data_size=327680
|
|
Bee_Motion_Mini.upload.flags=
|
|
Bee_Motion_Mini.upload.extra_flags=
|
|
Bee_Motion_Mini.upload.use_1200bps_touch=false
|
|
Bee_Motion_Mini.upload.wait_for_upload_port=false
|
|
|
|
Bee_Motion_Mini.serial.disableDTR=true
|
|
Bee_Motion_Mini.serial.disableRTS=true
|
|
|
|
Bee_Motion_Mini.build.tarch=riscv32
|
|
Bee_Motion_Mini.build.target=esp
|
|
Bee_Motion_Mini.build.mcu=esp32c3
|
|
Bee_Motion_Mini.build.core=esp32
|
|
Bee_Motion_Mini.build.variant=Bee_Motion_Mini
|
|
Bee_Motion_Mini.build.board=Bee_Motion_Mini
|
|
Bee_Motion_Mini.build.bootloader_addr=0x0
|
|
|
|
Bee_Motion_Mini.build.cdc_on_boot=1
|
|
Bee_Motion_Mini.build.f_cpu=160000000L
|
|
Bee_Motion_Mini.build.flash_size=4MB
|
|
Bee_Motion_Mini.build.flash_freq=80m
|
|
Bee_Motion_Mini.build.flash_mode=dio
|
|
Bee_Motion_Mini.build.boot=qio
|
|
Bee_Motion_Mini.build.partitions=default
|
|
Bee_Motion_Mini.build.defines=
|
|
|
|
Bee_Motion_Mini.menu.CDCOnBoot.default=Enabled
|
|
Bee_Motion_Mini.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
Bee_Motion_Mini.menu.CDCOnBoot.dis_cdc=Disabled
|
|
Bee_Motion_Mini.menu.CDCOnBoot.dis_cdc.build.cdc_on_boot=0
|
|
|
|
Bee_Motion_Mini.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
Bee_Motion_Mini.menu.PartitionScheme.default.build.partitions=default
|
|
Bee_Motion_Mini.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
Bee_Motion_Mini.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
Bee_Motion_Mini.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
Bee_Motion_Mini.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
Bee_Motion_Mini.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
Bee_Motion_Mini.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
Bee_Motion_Mini.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
Bee_Motion_Mini.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
Bee_Motion_Mini.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
Bee_Motion_Mini.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
Bee_Motion_Mini.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
Bee_Motion_Mini.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
Bee_Motion_Mini.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
Bee_Motion_Mini.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
Bee_Motion_Mini.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
Bee_Motion_Mini.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
Bee_Motion_Mini.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
|
|
Bee_Motion_Mini.menu.CPUFreq.160=160MHz (WiFi)
|
|
Bee_Motion_Mini.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
Bee_Motion_Mini.menu.CPUFreq.80=80MHz (WiFi)
|
|
Bee_Motion_Mini.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
Bee_Motion_Mini.menu.CPUFreq.40=40MHz
|
|
Bee_Motion_Mini.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
Bee_Motion_Mini.menu.CPUFreq.20=20MHz
|
|
Bee_Motion_Mini.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
Bee_Motion_Mini.menu.CPUFreq.10=10MHz
|
|
Bee_Motion_Mini.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
Bee_Motion_Mini.menu.FlashFreq.80=80MHz
|
|
Bee_Motion_Mini.menu.FlashFreq.80.build.flash_freq=80m
|
|
Bee_Motion_Mini.menu.FlashFreq.40=40MHz
|
|
Bee_Motion_Mini.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
Bee_Motion_Mini.menu.UploadSpeed.921600=921600
|
|
Bee_Motion_Mini.menu.UploadSpeed.921600.upload.speed=921600
|
|
Bee_Motion_Mini.menu.UploadSpeed.115200=115200
|
|
Bee_Motion_Mini.menu.UploadSpeed.115200.upload.speed=115200
|
|
Bee_Motion_Mini.menu.UploadSpeed.256000.windows=256000
|
|
Bee_Motion_Mini.menu.UploadSpeed.256000.upload.speed=256000
|
|
Bee_Motion_Mini.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
Bee_Motion_Mini.menu.UploadSpeed.230400=230400
|
|
Bee_Motion_Mini.menu.UploadSpeed.230400.upload.speed=230400
|
|
Bee_Motion_Mini.menu.UploadSpeed.460800.linux=460800
|
|
Bee_Motion_Mini.menu.UploadSpeed.460800.macosx=460800
|
|
Bee_Motion_Mini.menu.UploadSpeed.460800.upload.speed=460800
|
|
Bee_Motion_Mini.menu.UploadSpeed.512000.windows=512000
|
|
Bee_Motion_Mini.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
Bee_Motion_Mini.menu.DebugLevel.none=None
|
|
Bee_Motion_Mini.menu.DebugLevel.none.build.code_debug=0
|
|
Bee_Motion_Mini.menu.DebugLevel.error=Error
|
|
Bee_Motion_Mini.menu.DebugLevel.error.build.code_debug=1
|
|
Bee_Motion_Mini.menu.DebugLevel.warn=Warn
|
|
Bee_Motion_Mini.menu.DebugLevel.warn.build.code_debug=2
|
|
Bee_Motion_Mini.menu.DebugLevel.info=Info
|
|
Bee_Motion_Mini.menu.DebugLevel.info.build.code_debug=3
|
|
Bee_Motion_Mini.menu.DebugLevel.debug=Debug
|
|
Bee_Motion_Mini.menu.DebugLevel.debug.build.code_debug=4
|
|
Bee_Motion_Mini.menu.DebugLevel.verbose=Verbose
|
|
Bee_Motion_Mini.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
Bee_Motion_Mini.menu.EraseFlash.none=Disabled
|
|
Bee_Motion_Mini.menu.EraseFlash.none.upload.erase_cmd=
|
|
Bee_Motion_Mini.menu.EraseFlash.all=Enabled
|
|
Bee_Motion_Mini.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
###############################################################
|
|
|
|
Bee_S3.name=Bee S3
|
|
Bee_S3.vid.0=0x303a
|
|
Bee_S3.pid.0=0x8110
|
|
Bee_S3.vid.upload_port.0.vid=0x303a
|
|
Bee_S3.pid.upload_port.0.pid=0x8110
|
|
|
|
Bee_S3.bootloader.tool=esptool_py
|
|
Bee_S3.bootloader.tool.default=esptool_py
|
|
|
|
Bee_S3.upload.tool=esptool_py
|
|
Bee_S3.upload.tool.default=esptool_py
|
|
Bee_S3.upload.tool.network=esp_ota
|
|
|
|
Bee_S3.upload.maximum_size=1310720
|
|
Bee_S3.upload.maximum_data_size=327680
|
|
Bee_S3.upload.flags=
|
|
Bee_S3.upload.extra_flags=
|
|
Bee_S3.upload.use_1200bps_touch=false
|
|
Bee_S3.upload.wait_for_upload_port=false
|
|
|
|
Bee_S3.serial.disableDTR=false
|
|
Bee_S3.serial.disableRTS=false
|
|
|
|
Bee_S3.build.tarch=xtensa
|
|
Bee_S3.build.bootloader_addr=0x0
|
|
Bee_S3.build.target=esp32s3
|
|
Bee_S3.build.mcu=esp32s3
|
|
Bee_S3.build.core=esp32
|
|
Bee_S3.build.variant=Bee_S3
|
|
Bee_S3.build.board=Bee_S3
|
|
|
|
Bee_S3.build.usb_mode=1
|
|
Bee_S3.build.cdc_on_boot=1
|
|
Bee_S3.build.msc_on_boot=0
|
|
Bee_S3.build.dfu_on_boot=0
|
|
Bee_S3.build.f_cpu=240000000L
|
|
Bee_S3.build.flash_size=8MB
|
|
Bee_S3.build.flash_freq=80m
|
|
Bee_S3.build.flash_mode=dio
|
|
Bee_S3.build.boot=qio
|
|
Bee_S3.build.partitions=default_8MB
|
|
Bee_S3.build.defines=
|
|
Bee_S3.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
Bee_S3.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
|
|
Bee_S3.menu.USBMode.default=USB-OTG
|
|
Bee_S3.menu.USBMode.default.build.usb_mode=0
|
|
Bee_S3.menu.USBMode.default.upload.use_1200bps_touch=true
|
|
Bee_S3.menu.USBMode.default.upload.wait_for_upload_port=true
|
|
Bee_S3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
Bee_S3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
Bee_S3.menu.USBMode.hwcdc.upload.use_1200bps_touch=false
|
|
Bee_S3.menu.USBMode.hwcdc.upload.wait_for_upload_port=false
|
|
|
|
Bee_S3.menu.CDCOnBoot.cdc=Enabled
|
|
Bee_S3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
Bee_S3.menu.CDCOnBoot.default=Disabled
|
|
Bee_S3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
Bee_S3.menu.MSCOnBoot.default=Disabled
|
|
Bee_S3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
Bee_S3.menu.MSCOnBoot.msc=Enabled
|
|
Bee_S3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
Bee_S3.menu.DFUOnBoot.default=Disabled
|
|
Bee_S3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
Bee_S3.menu.DFUOnBoot.dfu=Enabled
|
|
Bee_S3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
Bee_S3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
Bee_S3.menu.PartitionScheme.default.build.partitions=default
|
|
Bee_S3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
Bee_S3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
Bee_S3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
Bee_S3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
Bee_S3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
Bee_S3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
Bee_S3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
Bee_S3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
Bee_S3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
Bee_S3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
Bee_S3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
Bee_S3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
Bee_S3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
Bee_S3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
Bee_S3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
Bee_S3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
Bee_S3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
Bee_S3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
Bee_S3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
Bee_S3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
Bee_S3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
Bee_S3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
Bee_S3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
Bee_S3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
Bee_S3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
Bee_S3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
Bee_S3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
Bee_S3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
Bee_S3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
Bee_S3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
Bee_S3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
|
|
Bee_S3.menu.CPUFreq.240=240MHz (WiFi)
|
|
Bee_S3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
Bee_S3.menu.CPUFreq.160=160MHz (WiFi)
|
|
Bee_S3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
Bee_S3.menu.CPUFreq.80=80MHz (WiFi)
|
|
Bee_S3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
Bee_S3.menu.CPUFreq.40=40MHz
|
|
Bee_S3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
Bee_S3.menu.CPUFreq.20=20MHz
|
|
Bee_S3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
Bee_S3.menu.CPUFreq.10=10MHz
|
|
Bee_S3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
Bee_S3.menu.FlashFreq.80=80MHz
|
|
Bee_S3.menu.FlashFreq.80.build.flash_freq=80m
|
|
Bee_S3.menu.FlashFreq.40=40MHz
|
|
Bee_S3.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
Bee_S3.menu.UploadSpeed.921600=921600
|
|
Bee_S3.menu.UploadSpeed.921600.upload.speed=921600
|
|
Bee_S3.menu.UploadSpeed.115200=115200
|
|
Bee_S3.menu.UploadSpeed.115200.upload.speed=115200
|
|
Bee_S3.menu.UploadSpeed.256000.windows=256000
|
|
Bee_S3.menu.UploadSpeed.256000.upload.speed=256000
|
|
Bee_S3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
Bee_S3.menu.UploadSpeed.230400=230400
|
|
Bee_S3.menu.UploadSpeed.230400.upload.speed=230400
|
|
Bee_S3.menu.UploadSpeed.460800.linux=460800
|
|
Bee_S3.menu.UploadSpeed.460800.macosx=460800
|
|
Bee_S3.menu.UploadSpeed.460800.upload.speed=460800
|
|
Bee_S3.menu.UploadSpeed.512000.windows=512000
|
|
Bee_S3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
Bee_S3.menu.DebugLevel.none=None
|
|
Bee_S3.menu.DebugLevel.none.build.code_debug=0
|
|
Bee_S3.menu.DebugLevel.error=Error
|
|
Bee_S3.menu.DebugLevel.error.build.code_debug=1
|
|
Bee_S3.menu.DebugLevel.warn=Warn
|
|
Bee_S3.menu.DebugLevel.warn.build.code_debug=2
|
|
Bee_S3.menu.DebugLevel.info=Info
|
|
Bee_S3.menu.DebugLevel.info.build.code_debug=3
|
|
Bee_S3.menu.DebugLevel.debug=Debug
|
|
Bee_S3.menu.DebugLevel.debug.build.code_debug=4
|
|
Bee_S3.menu.DebugLevel.verbose=Verbose
|
|
Bee_S3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
Bee_S3.menu.EraseFlash.none=Disabled
|
|
Bee_S3.menu.EraseFlash.none.upload.erase_cmd=
|
|
Bee_S3.menu.EraseFlash.all=Enabled
|
|
Bee_S3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
unphone7.name=unPhone 7
|
|
|
|
unphone7.bootloader.tool=esptool_py
|
|
unphone7.bootloader.tool.default=esptool_py
|
|
|
|
unphone7.upload.tool=esptool_py
|
|
unphone7.upload.tool.default=esptool_py
|
|
unphone7.upload.tool.network=esp_ota
|
|
|
|
unphone7.upload.maximum_size=1310720
|
|
unphone7.upload.maximum_data_size=327680
|
|
unphone7.upload.flags=
|
|
unphone7.upload.extra_flags=
|
|
|
|
unphone7.serial.disableDTR=true
|
|
unphone7.serial.disableRTS=true
|
|
|
|
unphone7.build.tarch=xtensa
|
|
unphone7.build.bootloader_addr=0x1000
|
|
unphone7.build.target=esp32
|
|
unphone7.build.mcu=esp32
|
|
unphone7.build.core=esp32
|
|
unphone7.build.variant=feather_esp32
|
|
unphone7.build.board=FEATHER_ESP32
|
|
|
|
unphone7.build.f_cpu=240000000L
|
|
unphone7.build.flash_mode=dio
|
|
unphone7.build.flash_size=4MB
|
|
unphone7.build.boot=dio
|
|
unphone7.build.partitions=default
|
|
unphone7.build.defines=-DUNPHONE_SPIN=7
|
|
|
|
unphone7.menu.FlashFreq.80=80MHz
|
|
unphone7.menu.FlashFreq.80.build.flash_freq=80m
|
|
unphone7.menu.FlashFreq.40=40MHz
|
|
unphone7.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
unphone7.menu.UploadSpeed.921600=921600
|
|
unphone7.menu.UploadSpeed.921600.upload.speed=921600
|
|
unphone7.menu.UploadSpeed.115200=115200
|
|
unphone7.menu.UploadSpeed.115200.upload.speed=115200
|
|
unphone7.menu.UploadSpeed.256000.windows=256000
|
|
unphone7.menu.UploadSpeed.256000.upload.speed=256000
|
|
unphone7.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
unphone7.menu.UploadSpeed.230400=230400
|
|
unphone7.menu.UploadSpeed.230400.upload.speed=230400
|
|
unphone7.menu.UploadSpeed.460800.linux=460800
|
|
unphone7.menu.UploadSpeed.460800.macosx=460800
|
|
unphone7.menu.UploadSpeed.460800.upload.speed=460800
|
|
unphone7.menu.UploadSpeed.512000.windows=512000
|
|
unphone7.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
unphone7.menu.DebugLevel.none=None
|
|
unphone7.menu.DebugLevel.none.build.code_debug=0
|
|
unphone7.menu.DebugLevel.error=Error
|
|
unphone7.menu.DebugLevel.error.build.code_debug=1
|
|
unphone7.menu.DebugLevel.warn=Warn
|
|
unphone7.menu.DebugLevel.warn.build.code_debug=2
|
|
unphone7.menu.DebugLevel.info=Info
|
|
unphone7.menu.DebugLevel.info.build.code_debug=3
|
|
unphone7.menu.DebugLevel.debug=Debug
|
|
unphone7.menu.DebugLevel.debug.build.code_debug=4
|
|
unphone7.menu.DebugLevel.verbose=Verbose
|
|
unphone7.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
unphone7.menu.PartitionScheme.default=Default
|
|
unphone7.menu.PartitionScheme.default.build.partitions=default
|
|
unphone7.menu.PartitionScheme.no_ota=No OTA (Large APP)
|
|
unphone7.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
unphone7.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
unphone7.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (Large APPS with OTA)
|
|
unphone7.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
unphone7.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
unphone7.menu.EraseFlash.none=Disabled
|
|
unphone7.menu.EraseFlash.none.upload.erase_cmd=
|
|
unphone7.menu.EraseFlash.all=Enabled
|
|
unphone7.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
unphone8.name=unPhone 8
|
|
unphone8.vid.0=0x16D0
|
|
unphone8.pid.0=0x1178
|
|
|
|
unphone8.bootloader.tool=esptool_py
|
|
unphone8.bootloader.tool.default=esptool_py
|
|
|
|
unphone8.upload.tool=esptool_py
|
|
unphone8.upload.tool.default=esptool_py
|
|
unphone8.upload.tool.network=esp_ota
|
|
|
|
unphone8.upload.maximum_size=8323072
|
|
unphone8.upload.maximum_data_size=2424832
|
|
unphone8.upload.flags=
|
|
unphone8.upload.extra_flags=
|
|
unphone8.upload.use_1200bps_touch=false
|
|
unphone8.upload.wait_for_upload_port=false
|
|
|
|
unphone8.serial.disableDTR=false
|
|
unphone8.serial.disableRTS=false
|
|
|
|
unphone8.build.tarch=xtensa
|
|
unphone8.build.bootloader_addr=0x0
|
|
unphone8.build.target=esp32s3
|
|
unphone8.build.mcu=esp32s3
|
|
unphone8.build.core=esp32
|
|
unphone8.build.variant=unphone8
|
|
unphone8.build.board=unphone8
|
|
|
|
unphone8.build.usb_mode=1
|
|
unphone8.build.cdc_on_boot=0
|
|
unphone8.build.msc_on_boot=0
|
|
unphone8.build.dfu_on_boot=0
|
|
unphone8.build.f_cpu=240000000L
|
|
unphone8.build.flash_size=8MB
|
|
unphone8.build.flash_freq=80m
|
|
unphone8.build.flash_mode=dio
|
|
unphone8.build.boot=qio
|
|
unphone8.build.boot_freq=80m
|
|
unphone8.build.partitions=default_8MB
|
|
unphone8.build.defines=-DBOARD_HAS_PSRAM -DUNPHONE_SPIN=8
|
|
unphone8.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
unphone8.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
unphone8.build.flash_type=qio
|
|
unphone8.build.psram_type=qspi
|
|
unphone8.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
unphone8.menu.USBMode.default=Hardware CDC and JTAG
|
|
unphone8.menu.USBMode.default.build.usb_mode=1
|
|
unphone8.menu.USBMode.hwcdc=USB-OTG (TinyUSB)
|
|
unphone8.menu.USBMode.hwcdc.build.usb_mode=0
|
|
|
|
unphone8.menu.CDCOnBoot.default=Disabled
|
|
unphone8.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
unphone8.menu.CDCOnBoot.cdc=Enabled
|
|
unphone8.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
unphone8.menu.MSCOnBoot.default=Disabled
|
|
unphone8.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
unphone8.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
unphone8.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
unphone8.menu.DFUOnBoot.default=Disabled
|
|
unphone8.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
unphone8.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
unphone8.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
unphone8.menu.UploadMode.default=UART0 / Hardware CDC
|
|
unphone8.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
unphone8.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
unphone8.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
unphone8.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
unphone8.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
unphone8.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
unphone8.menu.PartitionScheme.default.build.partitions=default
|
|
unphone8.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
unphone8.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
unphone8.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
unphone8.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
unphone8.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
unphone8.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
unphone8.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
unphone8.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
unphone8.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
unphone8.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
unphone8.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
unphone8.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
unphone8.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
unphone8.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
unphone8.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
unphone8.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
unphone8.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
unphone8.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
unphone8.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
unphone8.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
unphone8.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
unphone8.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
unphone8.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
unphone8.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
unphone8.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
unphone8.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
unphone8.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
unphone8.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
unphone8.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
unphone8.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
unphone8.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
unphone8.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
unphone8.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
unphone8.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
unphone8.menu.PartitionScheme.max_app_8MB=Maximum APP (7.9MB APP No OTA/No FS)
|
|
unphone8.menu.PartitionScheme.max_app_8MB.build.partitions=max_app_8MB
|
|
|
|
unphone8.menu.CPUFreq.240=240MHz (WiFi)
|
|
unphone8.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
unphone8.menu.CPUFreq.160=160MHz (WiFi)
|
|
unphone8.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
unphone8.menu.CPUFreq.80=80MHz (WiFi)
|
|
unphone8.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
unphone8.menu.CPUFreq.40=40MHz
|
|
unphone8.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
unphone8.menu.CPUFreq.20=20MHz
|
|
unphone8.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
unphone8.menu.CPUFreq.10=10MHz
|
|
unphone8.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
unphone8.menu.UploadSpeed.921600=921600
|
|
unphone8.menu.UploadSpeed.921600.upload.speed=921600
|
|
unphone8.menu.UploadSpeed.115200=115200
|
|
unphone8.menu.UploadSpeed.115200.upload.speed=115200
|
|
unphone8.menu.UploadSpeed.256000.windows=256000
|
|
unphone8.menu.UploadSpeed.256000.upload.speed=256000
|
|
unphone8.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
unphone8.menu.UploadSpeed.230400=230400
|
|
unphone8.menu.UploadSpeed.230400.upload.speed=230400
|
|
unphone8.menu.UploadSpeed.460800.linux=460800
|
|
unphone8.menu.UploadSpeed.460800.macosx=460800
|
|
unphone8.menu.UploadSpeed.460800.upload.speed=460800
|
|
unphone8.menu.UploadSpeed.512000.windows=512000
|
|
unphone8.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
unphone8.menu.DebugLevel.none=None
|
|
unphone8.menu.DebugLevel.none.build.code_debug=0
|
|
unphone8.menu.DebugLevel.error=Error
|
|
unphone8.menu.DebugLevel.error.build.code_debug=1
|
|
unphone8.menu.DebugLevel.warn=Warn
|
|
unphone8.menu.DebugLevel.warn.build.code_debug=2
|
|
unphone8.menu.DebugLevel.info=Info
|
|
unphone8.menu.DebugLevel.info.build.code_debug=3
|
|
unphone8.menu.DebugLevel.debug=Debug
|
|
unphone8.menu.DebugLevel.debug.build.code_debug=4
|
|
unphone8.menu.DebugLevel.verbose=Verbose
|
|
unphone8.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
#############################################################
|
|
|
|
unphone9.name=unPhone 9
|
|
unphone9.vid.0=0x16D0
|
|
unphone9.pid.0=0x1178
|
|
|
|
unphone9.bootloader.tool=esptool_py
|
|
unphone9.bootloader.tool.default=esptool_py
|
|
|
|
unphone9.upload.tool=esptool_py
|
|
unphone9.upload.tool.default=esptool_py
|
|
unphone9.upload.tool.network=esp_ota
|
|
|
|
unphone9.upload.maximum_size=8323072
|
|
unphone9.upload.maximum_data_size=8716288
|
|
unphone9.upload.flags=
|
|
unphone9.upload.extra_flags=
|
|
unphone9.upload.use_1200bps_touch=false
|
|
unphone9.upload.wait_for_upload_port=false
|
|
|
|
unphone9.serial.disableDTR=false
|
|
unphone9.serial.disableRTS=false
|
|
|
|
unphone9.build.tarch=xtensa
|
|
unphone9.build.bootloader_addr=0x0
|
|
unphone9.build.target=esp32s3
|
|
unphone9.build.mcu=esp32s3
|
|
unphone9.build.core=esp32
|
|
unphone9.build.variant=unphone9
|
|
unphone9.build.board=unphone9
|
|
|
|
unphone9.build.usb_mode=1
|
|
unphone9.build.cdc_on_boot=1
|
|
unphone9.build.msc_on_boot=0
|
|
unphone9.build.dfu_on_boot=0
|
|
unphone9.build.f_cpu=240000000L
|
|
unphone9.build.flash_size=8MB
|
|
unphone9.build.flash_freq=80m
|
|
unphone9.build.flash_mode=dio
|
|
unphone9.build.boot=qio
|
|
unphone9.build.boot_freq=80m
|
|
unphone9.build.partitions=default_8MB
|
|
unphone9.build.defines=-DBOARD_HAS_PSRAM -DUNPHONE_SPIN=9
|
|
unphone9.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
unphone9.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
unphone9.build.flash_type=qio
|
|
unphone9.build.psram_type=qspi
|
|
unphone9.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
unphone9.menu.USBMode.default=Hardware CDC and JTAG
|
|
unphone9.menu.USBMode.default.build.usb_mode=1
|
|
unphone9.menu.USBMode.hwcdc=USB-OTG (TinyUSB)
|
|
unphone9.menu.USBMode.hwcdc.build.usb_mode=0
|
|
|
|
unphone9.menu.CDCOnBoot.default=Enabled
|
|
unphone9.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
unphone9.menu.CDCOnBoot.cdc=Disabled
|
|
unphone9.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
|
|
|
|
unphone9.menu.MSCOnBoot.default=Disabled
|
|
unphone9.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
unphone9.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
unphone9.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
unphone9.menu.DFUOnBoot.default=Disabled
|
|
unphone9.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
unphone9.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
unphone9.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
unphone9.menu.UploadMode.default=UART0 / Hardware CDC
|
|
unphone9.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
unphone9.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
unphone9.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
unphone9.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
unphone9.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
unphone9.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
unphone9.menu.PartitionScheme.default.build.partitions=default
|
|
unphone9.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
unphone9.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
unphone9.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
unphone9.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
unphone9.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
unphone9.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
unphone9.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
unphone9.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
unphone9.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
unphone9.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
unphone9.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
unphone9.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
unphone9.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
unphone9.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
unphone9.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
unphone9.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
unphone9.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
unphone9.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
unphone9.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
unphone9.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
unphone9.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
unphone9.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
unphone9.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
unphone9.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
unphone9.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
unphone9.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
unphone9.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
unphone9.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
unphone9.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
unphone9.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
unphone9.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
unphone9.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
unphone9.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
unphone9.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
unphone9.menu.PartitionScheme.max_app_8MB=Maximum APP (7.9MB APP No OTA/No FS)
|
|
unphone9.menu.PartitionScheme.max_app_8MB.build.partitions=max_app_8MB
|
|
|
|
unphone9.menu.CPUFreq.240=240MHz (WiFi)
|
|
unphone9.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
unphone9.menu.CPUFreq.160=160MHz (WiFi)
|
|
unphone9.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
unphone9.menu.CPUFreq.80=80MHz (WiFi)
|
|
unphone9.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
unphone9.menu.CPUFreq.40=40MHz
|
|
unphone9.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
unphone9.menu.CPUFreq.20=20MHz
|
|
unphone9.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
unphone9.menu.CPUFreq.10=10MHz
|
|
unphone9.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
unphone9.menu.UploadSpeed.921600=921600
|
|
unphone9.menu.UploadSpeed.921600.upload.speed=921600
|
|
unphone9.menu.UploadSpeed.115200=115200
|
|
unphone9.menu.UploadSpeed.115200.upload.speed=115200
|
|
unphone9.menu.UploadSpeed.256000.windows=256000
|
|
unphone9.menu.UploadSpeed.256000.upload.speed=256000
|
|
unphone9.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
unphone9.menu.UploadSpeed.230400=230400
|
|
unphone9.menu.UploadSpeed.230400.upload.speed=230400
|
|
unphone9.menu.UploadSpeed.460800.linux=460800
|
|
unphone9.menu.UploadSpeed.460800.macosx=460800
|
|
unphone9.menu.UploadSpeed.460800.upload.speed=460800
|
|
unphone9.menu.UploadSpeed.512000.windows=512000
|
|
unphone9.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
unphone9.menu.DebugLevel.none=None
|
|
unphone9.menu.DebugLevel.none.build.code_debug=0
|
|
unphone9.menu.DebugLevel.error=Error
|
|
unphone9.menu.DebugLevel.error.build.code_debug=1
|
|
unphone9.menu.DebugLevel.warn=Warn
|
|
unphone9.menu.DebugLevel.warn.build.code_debug=2
|
|
unphone9.menu.DebugLevel.info=Info
|
|
unphone9.menu.DebugLevel.info.build.code_debug=3
|
|
unphone9.menu.DebugLevel.debug=Debug
|
|
unphone9.menu.DebugLevel.debug.build.code_debug=4
|
|
unphone9.menu.DebugLevel.verbose=Verbose
|
|
unphone9.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
unphone9.menu.EraseFlash.none=Disabled
|
|
unphone9.menu.EraseFlash.none.upload.erase_cmd=
|
|
unphone9.menu.EraseFlash.all=Enabled
|
|
unphone9.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
###############################################################
|
|
# Cytron Maker Feather AIoT S3
|
|
|
|
cytron_maker_feather_aiot_s3.name=Cytron Maker Feather AIoT S3
|
|
cytron_maker_feather_aiot_s3.vid.0=0x303a
|
|
cytron_maker_feather_aiot_s3.pid.0=0x80f8
|
|
|
|
cytron_maker_feather_aiot_s3.bootloader.tool=esptool_py
|
|
cytron_maker_feather_aiot_s3.bootloader.tool.default=esptool_py
|
|
|
|
cytron_maker_feather_aiot_s3.upload.tool=esptool_py
|
|
cytron_maker_feather_aiot_s3.upload.tool.default=esptool_py
|
|
cytron_maker_feather_aiot_s3.upload.tool.network=esp_ota
|
|
|
|
cytron_maker_feather_aiot_s3.upload.maximum_size=1310720
|
|
cytron_maker_feather_aiot_s3.upload.maximum_data_size=327680
|
|
cytron_maker_feather_aiot_s3.upload.flags=
|
|
cytron_maker_feather_aiot_s3.upload.extra_flags=
|
|
cytron_maker_feather_aiot_s3.upload.use_1200bps_touch=true
|
|
cytron_maker_feather_aiot_s3.upload.wait_for_upload_port=true
|
|
|
|
cytron_maker_feather_aiot_s3.serial.disableDTR=false
|
|
cytron_maker_feather_aiot_s3.serial.disableRTS=false
|
|
|
|
cytron_maker_feather_aiot_s3.build.tarch=xtensa
|
|
cytron_maker_feather_aiot_s3.build.bootloader_addr=0x0
|
|
cytron_maker_feather_aiot_s3.build.target=esp32s3
|
|
cytron_maker_feather_aiot_s3.build.mcu=esp32s3
|
|
cytron_maker_feather_aiot_s3.build.core=esp32
|
|
cytron_maker_feather_aiot_s3.build.variant=cytron_maker_feather_aiot_s3
|
|
cytron_maker_feather_aiot_s3.build.board=CYTRON_MAKER_FEATHER_AIOT_S3
|
|
|
|
cytron_maker_feather_aiot_s3.build.usb_mode=0
|
|
cytron_maker_feather_aiot_s3.build.cdc_on_boot=1
|
|
cytron_maker_feather_aiot_s3.build.msc_on_boot=0
|
|
cytron_maker_feather_aiot_s3.build.dfu_on_boot=0
|
|
cytron_maker_feather_aiot_s3.build.f_cpu=240000000L
|
|
cytron_maker_feather_aiot_s3.build.flash_size=8MB
|
|
cytron_maker_feather_aiot_s3.build.flash_freq=80m
|
|
cytron_maker_feather_aiot_s3.build.flash_mode=dio
|
|
cytron_maker_feather_aiot_s3.build.boot=qio
|
|
cytron_maker_feather_aiot_s3.build.partitions=default
|
|
cytron_maker_feather_aiot_s3.build.defines=
|
|
cytron_maker_feather_aiot_s3.build.loop_core=
|
|
cytron_maker_feather_aiot_s3.build.event_core=
|
|
cytron_maker_feather_aiot_s3.build.flash_type=qio
|
|
cytron_maker_feather_aiot_s3.build.psram_type=opi
|
|
cytron_maker_feather_aiot_s3.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
cytron_maker_feather_aiot_s3.menu.LoopCore.1=Core 1
|
|
cytron_maker_feather_aiot_s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
cytron_maker_feather_aiot_s3.menu.LoopCore.0=Core 0
|
|
cytron_maker_feather_aiot_s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
cytron_maker_feather_aiot_s3.menu.EventsCore.1=Core 1
|
|
cytron_maker_feather_aiot_s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
cytron_maker_feather_aiot_s3.menu.EventsCore.0=Core 0
|
|
cytron_maker_feather_aiot_s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
cytron_maker_feather_aiot_s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
cytron_maker_feather_aiot_s3.menu.USBMode.default.build.usb_mode=0
|
|
cytron_maker_feather_aiot_s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
cytron_maker_feather_aiot_s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
|
|
cytron_maker_feather_aiot_s3.menu.CDCOnBoot.cdc=Enabled
|
|
cytron_maker_feather_aiot_s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
cytron_maker_feather_aiot_s3.menu.CDCOnBoot.default=Disabled
|
|
cytron_maker_feather_aiot_s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
cytron_maker_feather_aiot_s3.menu.MSCOnBoot.default=Disabled
|
|
cytron_maker_feather_aiot_s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
cytron_maker_feather_aiot_s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
cytron_maker_feather_aiot_s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
cytron_maker_feather_aiot_s3.menu.DFUOnBoot.default=Disabled
|
|
cytron_maker_feather_aiot_s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
cytron_maker_feather_aiot_s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
cytron_maker_feather_aiot_s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
cytron_maker_feather_aiot_s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
cytron_maker_feather_aiot_s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
cytron_maker_feather_aiot_s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
cytron_maker_feather_aiot_s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
cytron_maker_feather_aiot_s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
cytron_maker_feather_aiot_s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
cytron_maker_feather_aiot_s3.menu.PSRAM.opi=OPI PSRAM
|
|
cytron_maker_feather_aiot_s3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
cytron_maker_feather_aiot_s3.menu.PSRAM.opi.build.psram_type=opi
|
|
cytron_maker_feather_aiot_s3.menu.PSRAM.enabled=QSPI PSRAM
|
|
cytron_maker_feather_aiot_s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
cytron_maker_feather_aiot_s3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
cytron_maker_feather_aiot_s3.menu.PSRAM.disabled=Disabled
|
|
cytron_maker_feather_aiot_s3.menu.PSRAM.disabled.build.defines=
|
|
cytron_maker_feather_aiot_s3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
|
|
cytron_maker_feather_aiot_s3.menu.PartitionScheme.tinyuf2=TinyUF2 8MB (2MB APP/3.7MB FFAT)
|
|
cytron_maker_feather_aiot_s3.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
cytron_maker_feather_aiot_s3.menu.PartitionScheme.tinyuf2.build.custom_partitions=partitions-8MB-tinyuf2
|
|
cytron_maker_feather_aiot_s3.menu.PartitionScheme.tinyuf2.upload.maximum_size=2097152
|
|
cytron_maker_feather_aiot_s3.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
cytron_maker_feather_aiot_s3.menu.PartitionScheme.default_8MB=Default (3MB APP/1.5MB SPIFFS)
|
|
cytron_maker_feather_aiot_s3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
cytron_maker_feather_aiot_s3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
|
|
cytron_maker_feather_aiot_s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
cytron_maker_feather_aiot_s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
cytron_maker_feather_aiot_s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
cytron_maker_feather_aiot_s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
cytron_maker_feather_aiot_s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
cytron_maker_feather_aiot_s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
cytron_maker_feather_aiot_s3.menu.CPUFreq.40=40MHz
|
|
cytron_maker_feather_aiot_s3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
cytron_maker_feather_aiot_s3.menu.CPUFreq.20=20MHz
|
|
cytron_maker_feather_aiot_s3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
cytron_maker_feather_aiot_s3.menu.CPUFreq.10=10MHz
|
|
cytron_maker_feather_aiot_s3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.qio=QIO 80MHz
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.qio.build.flash_mode=dio
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.qio.build.boot=qio
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.qio.build.boot_freq=80m
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.qio.build.flash_freq=80m
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.qio120=QIO 120MHz
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.qio120.build.boot=qio
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.dio=DIO 80MHz
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.dio.build.flash_mode=dio
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.dio.build.boot=dio
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.dio.build.boot_freq=80m
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.dio.build.flash_freq=80m
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.opi=OPI 80MHz
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.opi.build.flash_mode=dout
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.opi.build.boot=opi
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.opi.build.boot_freq=80m
|
|
cytron_maker_feather_aiot_s3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
cytron_maker_feather_aiot_s3.menu.FlashSize.8M=8MB (64Mb)
|
|
cytron_maker_feather_aiot_s3.menu.FlashSize.8M.build.flash_size=8MB
|
|
|
|
cytron_maker_feather_aiot_s3.menu.UploadSpeed.921600=921600
|
|
cytron_maker_feather_aiot_s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
cytron_maker_feather_aiot_s3.menu.UploadSpeed.115200=115200
|
|
cytron_maker_feather_aiot_s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
cytron_maker_feather_aiot_s3.menu.UploadSpeed.256000.windows=256000
|
|
cytron_maker_feather_aiot_s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
cytron_maker_feather_aiot_s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
cytron_maker_feather_aiot_s3.menu.UploadSpeed.230400=230400
|
|
cytron_maker_feather_aiot_s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
cytron_maker_feather_aiot_s3.menu.UploadSpeed.460800.linux=460800
|
|
cytron_maker_feather_aiot_s3.menu.UploadSpeed.460800.macosx=460800
|
|
cytron_maker_feather_aiot_s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
cytron_maker_feather_aiot_s3.menu.UploadSpeed.512000.windows=512000
|
|
cytron_maker_feather_aiot_s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
cytron_maker_feather_aiot_s3.menu.DebugLevel.none=None
|
|
cytron_maker_feather_aiot_s3.menu.DebugLevel.none.build.code_debug=0
|
|
cytron_maker_feather_aiot_s3.menu.DebugLevel.error=Error
|
|
cytron_maker_feather_aiot_s3.menu.DebugLevel.error.build.code_debug=1
|
|
cytron_maker_feather_aiot_s3.menu.DebugLevel.warn=Warn
|
|
cytron_maker_feather_aiot_s3.menu.DebugLevel.warn.build.code_debug=2
|
|
cytron_maker_feather_aiot_s3.menu.DebugLevel.info=Info
|
|
cytron_maker_feather_aiot_s3.menu.DebugLevel.info.build.code_debug=3
|
|
cytron_maker_feather_aiot_s3.menu.DebugLevel.debug=Debug
|
|
cytron_maker_feather_aiot_s3.menu.DebugLevel.debug.build.code_debug=4
|
|
cytron_maker_feather_aiot_s3.menu.DebugLevel.verbose=Verbose
|
|
cytron_maker_feather_aiot_s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
cytron_maker_feather_aiot_s3.menu.EraseFlash.none=Disabled
|
|
cytron_maker_feather_aiot_s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
cytron_maker_feather_aiot_s3.menu.EraseFlash.all=Enabled
|
|
cytron_maker_feather_aiot_s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
# RedPill(+) ESP32-S3
|
|
|
|
redpill_esp32s3.name=RedPill(+) ESP32-S3
|
|
|
|
redpill_esp32s3.bootloader.tool=esptool_py
|
|
redpill_esp32s3.bootloader.tool.default=esptool_py
|
|
|
|
redpill_esp32s3.upload.tool=esptool_py
|
|
redpill_esp32s3.upload.tool.default=esptool_py
|
|
redpill_esp32s3.upload.tool.network=esp_ota
|
|
|
|
redpill_esp32s3.upload.maximum_size=1310720
|
|
redpill_esp32s3.upload.maximum_data_size=327680
|
|
redpill_esp32s3.upload.flags=
|
|
redpill_esp32s3.upload.extra_flags=
|
|
redpill_esp32s3.upload.use_1200bps_touch=true
|
|
redpill_esp32s3.upload.wait_for_upload_port=true
|
|
|
|
redpill_esp32s3.serial.disableDTR=false
|
|
redpill_esp32s3.serial.disableRTS=false
|
|
|
|
redpill_esp32s3.build.tarch=xtensa
|
|
redpill_esp32s3.build.bootloader_addr=0x0
|
|
redpill_esp32s3.build.target=esp32s3
|
|
redpill_esp32s3.build.mcu=esp32s3
|
|
redpill_esp32s3.build.core=esp32
|
|
redpill_esp32s3.build.variant=redpill_esp32s3
|
|
redpill_esp32s3.build.board=REDPILL_ESP32S3
|
|
|
|
redpill_esp32s3.build.usb_mode=0
|
|
redpill_esp32s3.build.cdc_on_boot=1
|
|
redpill_esp32s3.build.msc_on_boot=0
|
|
redpill_esp32s3.build.dfu_on_boot=0
|
|
redpill_esp32s3.build.f_cpu=240000000L
|
|
redpill_esp32s3.build.flash_size=8MB
|
|
redpill_esp32s3.build.flash_freq=80m
|
|
redpill_esp32s3.build.flash_mode=dio
|
|
redpill_esp32s3.build.boot=qio
|
|
redpill_esp32s3.build.partitions=default
|
|
redpill_esp32s3.build.defines=
|
|
redpill_esp32s3.build.loop_core=
|
|
redpill_esp32s3.build.event_core=
|
|
redpill_esp32s3.build.flash_type=qio
|
|
redpill_esp32s3.build.psram_type=qspi
|
|
redpill_esp32s3.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
redpill_esp32s3.menu.LoopCore.1=Core 1
|
|
redpill_esp32s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
redpill_esp32s3.menu.LoopCore.0=Core 0
|
|
redpill_esp32s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
redpill_esp32s3.menu.EventsCore.1=Core 1
|
|
redpill_esp32s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
redpill_esp32s3.menu.EventsCore.0=Core 0
|
|
redpill_esp32s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
redpill_esp32s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
redpill_esp32s3.menu.USBMode.default.build.usb_mode=0
|
|
redpill_esp32s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
redpill_esp32s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
|
|
redpill_esp32s3.menu.CDCOnBoot.cdc=Enabled
|
|
redpill_esp32s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
redpill_esp32s3.menu.CDCOnBoot.default=Disabled
|
|
redpill_esp32s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
redpill_esp32s3.menu.MSCOnBoot.default=Disabled
|
|
redpill_esp32s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
redpill_esp32s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
redpill_esp32s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
redpill_esp32s3.menu.DFUOnBoot.default=Disabled
|
|
redpill_esp32s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
redpill_esp32s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
redpill_esp32s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
redpill_esp32s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
redpill_esp32s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
redpill_esp32s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
redpill_esp32s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
redpill_esp32s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
redpill_esp32s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
redpill_esp32s3.menu.PSRAM.enabled=QSPI PSRAM
|
|
redpill_esp32s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
redpill_esp32s3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
redpill_esp32s3.menu.PSRAM.disabled=Disabled
|
|
redpill_esp32s3.menu.PSRAM.disabled.build.defines=
|
|
redpill_esp32s3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
redpill_esp32s3.menu.PSRAM.opi=OPI PSRAM
|
|
redpill_esp32s3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
redpill_esp32s3.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
redpill_esp32s3.menu.PartitionScheme.tinyuf2=TinyUF2 8MB (2MB APP/3.7MB FFAT)
|
|
redpill_esp32s3.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
redpill_esp32s3.menu.PartitionScheme.tinyuf2.build.custom_partitions=partitions-8MB-tinyuf2
|
|
redpill_esp32s3.menu.PartitionScheme.tinyuf2.upload.maximum_size=2097152
|
|
redpill_esp32s3.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
redpill_esp32s3.menu.PartitionScheme.default_8MB=Default (3MB APP/1.5MB SPIFFS)
|
|
redpill_esp32s3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
redpill_esp32s3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
|
|
redpill_esp32s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
redpill_esp32s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
redpill_esp32s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
redpill_esp32s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
redpill_esp32s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
redpill_esp32s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
redpill_esp32s3.menu.CPUFreq.40=40MHz
|
|
redpill_esp32s3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
redpill_esp32s3.menu.CPUFreq.20=20MHz
|
|
redpill_esp32s3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
redpill_esp32s3.menu.CPUFreq.10=10MHz
|
|
redpill_esp32s3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
redpill_esp32s3.menu.FlashMode.qio=QIO 80MHz
|
|
redpill_esp32s3.menu.FlashMode.qio.build.flash_mode=dio
|
|
redpill_esp32s3.menu.FlashMode.qio.build.boot=qio
|
|
redpill_esp32s3.menu.FlashMode.qio.build.boot_freq=80m
|
|
redpill_esp32s3.menu.FlashMode.qio.build.flash_freq=80m
|
|
redpill_esp32s3.menu.FlashMode.qio120=QIO 120MHz
|
|
redpill_esp32s3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
redpill_esp32s3.menu.FlashMode.qio120.build.boot=qio
|
|
redpill_esp32s3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
redpill_esp32s3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
redpill_esp32s3.menu.FlashMode.dio=DIO 80MHz
|
|
redpill_esp32s3.menu.FlashMode.dio.build.flash_mode=dio
|
|
redpill_esp32s3.menu.FlashMode.dio.build.boot=dio
|
|
redpill_esp32s3.menu.FlashMode.dio.build.boot_freq=80m
|
|
redpill_esp32s3.menu.FlashMode.dio.build.flash_freq=80m
|
|
redpill_esp32s3.menu.FlashMode.opi=OPI 80MHz
|
|
redpill_esp32s3.menu.FlashMode.opi.build.flash_mode=dout
|
|
redpill_esp32s3.menu.FlashMode.opi.build.boot=opi
|
|
redpill_esp32s3.menu.FlashMode.opi.build.boot_freq=80m
|
|
redpill_esp32s3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
redpill_esp32s3.menu.FlashSize.8M=8MB (64Mb)
|
|
redpill_esp32s3.menu.FlashSize.8M.build.flash_size=8MB
|
|
|
|
redpill_esp32s3.menu.UploadSpeed.921600=921600
|
|
redpill_esp32s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
redpill_esp32s3.menu.UploadSpeed.115200=115200
|
|
redpill_esp32s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
redpill_esp32s3.menu.UploadSpeed.256000.windows=256000
|
|
redpill_esp32s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
redpill_esp32s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
redpill_esp32s3.menu.UploadSpeed.230400=230400
|
|
redpill_esp32s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
redpill_esp32s3.menu.UploadSpeed.460800.linux=460800
|
|
redpill_esp32s3.menu.UploadSpeed.460800.macosx=460800
|
|
redpill_esp32s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
redpill_esp32s3.menu.UploadSpeed.512000.windows=512000
|
|
redpill_esp32s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
redpill_esp32s3.menu.DebugLevel.none=None
|
|
redpill_esp32s3.menu.DebugLevel.none.build.code_debug=0
|
|
redpill_esp32s3.menu.DebugLevel.error=Error
|
|
redpill_esp32s3.menu.DebugLevel.error.build.code_debug=1
|
|
redpill_esp32s3.menu.DebugLevel.warn=Warn
|
|
redpill_esp32s3.menu.DebugLevel.warn.build.code_debug=2
|
|
redpill_esp32s3.menu.DebugLevel.info=Info
|
|
redpill_esp32s3.menu.DebugLevel.info.build.code_debug=3
|
|
redpill_esp32s3.menu.DebugLevel.debug=Debug
|
|
redpill_esp32s3.menu.DebugLevel.debug.build.code_debug=4
|
|
redpill_esp32s3.menu.DebugLevel.verbose=Verbose
|
|
redpill_esp32s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
redpill_esp32s3.menu.EraseFlash.none=Disabled
|
|
redpill_esp32s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
redpill_esp32s3.menu.EraseFlash.all=Enabled
|
|
redpill_esp32s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
esp32c3m1IKit.name=ESP-C3-M1-I-Kit
|
|
|
|
esp32c3m1IKit.bootloader.tool=esptool_py
|
|
esp32c3m1IKit.bootloader.tool.default=esptool_py
|
|
|
|
esp32c3m1IKit.upload.tool=esptool_py
|
|
esp32c3m1IKit.upload.tool.default=esptool_py
|
|
esp32c3m1IKit.upload.tool.network=esp_ota
|
|
|
|
esp32c3m1IKit.upload.maximum_size=1310720
|
|
esp32c3m1IKit.upload.maximum_data_size=327680
|
|
esp32c3m1IKit.upload.flags=
|
|
esp32c3m1IKit.upload.extra_flags=
|
|
esp32c3m1IKit.upload.use_1200bps_touch=false
|
|
esp32c3m1IKit.upload.wait_for_upload_port=false
|
|
|
|
esp32c3m1IKit.serial.disableDTR=false
|
|
esp32c3m1IKit.serial.disableRTS=false
|
|
|
|
esp32c3m1IKit.build.tarch=riscv32
|
|
esp32c3m1IKit.build.target=esp
|
|
esp32c3m1IKit.build.mcu=esp32c3
|
|
esp32c3m1IKit.build.core=esp32
|
|
esp32c3m1IKit.build.variant=esp_c3_m1_i_kit
|
|
esp32c3m1IKit.build.board=ESP32C3_M1_I_KIT
|
|
esp32c3m1IKit.build.bootloader_addr=0x0
|
|
|
|
esp32c3m1IKit.build.cdc_on_boot=0
|
|
esp32c3m1IKit.build.f_cpu=160000000L
|
|
esp32c3m1IKit.build.flash_size=4MB
|
|
esp32c3m1IKit.build.flash_freq=80m
|
|
esp32c3m1IKit.build.flash_mode=qio
|
|
esp32c3m1IKit.build.boot=qio
|
|
esp32c3m1IKit.build.partitions=default
|
|
esp32c3m1IKit.build.defines=
|
|
|
|
esp32c3m1IKit.menu.CDCOnBoot.default=Disabled
|
|
esp32c3m1IKit.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
esp32c3m1IKit.menu.CDCOnBoot.cdc=Enabled
|
|
esp32c3m1IKit.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
esp32c3m1IKit.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
esp32c3m1IKit.menu.PartitionScheme.default.build.partitions=default
|
|
esp32c3m1IKit.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
esp32c3m1IKit.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
esp32c3m1IKit.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
esp32c3m1IKit.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
esp32c3m1IKit.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
esp32c3m1IKit.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
esp32c3m1IKit.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
esp32c3m1IKit.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
esp32c3m1IKit.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
esp32c3m1IKit.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
esp32c3m1IKit.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
esp32c3m1IKit.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
esp32c3m1IKit.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
esp32c3m1IKit.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
esp32c3m1IKit.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
esp32c3m1IKit.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
esp32c3m1IKit.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
esp32c3m1IKit.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
esp32c3m1IKit.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
esp32c3m1IKit.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
esp32c3m1IKit.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
esp32c3m1IKit.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
esp32c3m1IKit.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
esp32c3m1IKit.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
esp32c3m1IKit.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
esp32c3m1IKit.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
esp32c3m1IKit.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
esp32c3m1IKit.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
|
|
esp32c3m1IKit.menu.CPUFreq.160=160MHz (WiFi)
|
|
esp32c3m1IKit.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32c3m1IKit.menu.CPUFreq.80=80MHz (WiFi)
|
|
esp32c3m1IKit.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32c3m1IKit.menu.CPUFreq.40=40MHz
|
|
esp32c3m1IKit.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32c3m1IKit.menu.CPUFreq.20=20MHz
|
|
esp32c3m1IKit.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32c3m1IKit.menu.CPUFreq.10=10MHz
|
|
esp32c3m1IKit.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32c3m1IKit.menu.UploadSpeed.921600=921600
|
|
esp32c3m1IKit.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32c3m1IKit.menu.UploadSpeed.115200=115200
|
|
esp32c3m1IKit.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32c3m1IKit.menu.UploadSpeed.256000.windows=256000
|
|
esp32c3m1IKit.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32c3m1IKit.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32c3m1IKit.menu.UploadSpeed.230400=230400
|
|
esp32c3m1IKit.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32c3m1IKit.menu.UploadSpeed.460800.linux=460800
|
|
esp32c3m1IKit.menu.UploadSpeed.460800.macosx=460800
|
|
esp32c3m1IKit.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32c3m1IKit.menu.UploadSpeed.512000.windows=512000
|
|
esp32c3m1IKit.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32c3m1IKit.menu.DebugLevel.none=None
|
|
esp32c3m1IKit.menu.DebugLevel.none.build.code_debug=0
|
|
esp32c3m1IKit.menu.DebugLevel.error=Error
|
|
esp32c3m1IKit.menu.DebugLevel.error.build.code_debug=1
|
|
esp32c3m1IKit.menu.DebugLevel.warn=Warn
|
|
esp32c3m1IKit.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32c3m1IKit.menu.DebugLevel.info=Info
|
|
esp32c3m1IKit.menu.DebugLevel.info.build.code_debug=3
|
|
esp32c3m1IKit.menu.DebugLevel.debug=Debug
|
|
esp32c3m1IKit.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32c3m1IKit.menu.DebugLevel.verbose=Verbose
|
|
esp32c3m1IKit.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32c3m1IKit.menu.EraseFlash.none=Disabled
|
|
esp32c3m1IKit.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32c3m1IKit.menu.EraseFlash.all=Enabled
|
|
esp32c3m1IKit.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
roboheart_hercules.name=RoboHeart Hercules
|
|
|
|
roboheart_hercules.upload.tool=esptool_py
|
|
roboheart_hercules.upload.tool.default=esptool_py
|
|
roboheart_hercules.upload.maximum_size=1310720
|
|
roboheart_hercules.upload.maximum_data_size=327680
|
|
roboheart_hercules.upload.wait_for_upload_port=true
|
|
roboheart_hercules.upload.flags=
|
|
roboheart_hercules.upload.extra_flags=
|
|
|
|
roboheart_hercules.serial.disableDTR=true
|
|
roboheart_hercules.serial.disableRTS=true
|
|
|
|
roboheart_hercules.build.tarch=xtensa
|
|
roboheart_hercules.build.bootloader_addr=0x1000
|
|
roboheart_hercules.build.target=esp32
|
|
roboheart_hercules.build.mcu=esp32
|
|
roboheart_hercules.build.core=esp32
|
|
roboheart_hercules.build.variant=roboheart_hercules
|
|
roboheart_hercules.build.board=roboheart_hercules
|
|
|
|
roboheart_hercules.build.f_cpu=240000000L
|
|
roboheart_hercules.build.flash_size=4MB
|
|
roboheart_hercules.build.flash_freq=40m
|
|
roboheart_hercules.build.flash_mode=dio
|
|
roboheart_hercules.build.boot=dio
|
|
roboheart_hercules.build.partitions=default
|
|
roboheart_hercules.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
roboheart_hercules.build.extra_libs=
|
|
|
|
roboheart_hercules.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
roboheart_hercules.menu.PartitionScheme.default.build.partitions=default
|
|
roboheart_hercules.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
roboheart_hercules.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
roboheart_hercules.menu.PartitionScheme.default_8MB=8M Flash (3MB APP/1.5MB FAT)
|
|
roboheart_hercules.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
roboheart_hercules.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
roboheart_hercules.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
roboheart_hercules.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
roboheart_hercules.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
roboheart_hercules.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
roboheart_hercules.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
roboheart_hercules.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
roboheart_hercules.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
roboheart_hercules.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
roboheart_hercules.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
roboheart_hercules.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
roboheart_hercules.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
roboheart_hercules.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
roboheart_hercules.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
roboheart_hercules.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
roboheart_hercules.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
roboheart_hercules.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
roboheart_hercules.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
roboheart_hercules.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
roboheart_hercules.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
roboheart_hercules.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
roboheart_hercules.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
|
|
roboheart_hercules.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
roboheart_hercules.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
roboheart_hercules.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9MB FATFS)
|
|
roboheart_hercules.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
roboheart_hercules.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
roboheart_hercules.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
roboheart_hercules.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
roboheart_hercules.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
roboheart_hercules.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
roboheart_hercules.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
roboheart_hercules.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
|
|
roboheart_hercules.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
roboheart_hercules.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
roboheart_hercules.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
roboheart_hercules.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
roboheart_hercules.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
roboheart_hercules.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
roboheart_hercules.menu.CPUFreq.40=40MHz
|
|
roboheart_hercules.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
roboheart_hercules.menu.CPUFreq.20=20MHz
|
|
roboheart_hercules.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
roboheart_hercules.menu.CPUFreq.10=10MHz
|
|
roboheart_hercules.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
roboheart_hercules.menu.FlashMode.qio=QIO
|
|
roboheart_hercules.menu.FlashMode.qio.build.flash_mode=dio
|
|
roboheart_hercules.menu.FlashMode.qio.build.boot=qio
|
|
roboheart_hercules.menu.FlashMode.dio=DIO
|
|
roboheart_hercules.menu.FlashMode.dio.build.flash_mode=dio
|
|
roboheart_hercules.menu.FlashMode.dio.build.boot=dio
|
|
|
|
roboheart_hercules.menu.FlashFreq.80=80MHz
|
|
roboheart_hercules.menu.FlashFreq.80.build.flash_freq=80m
|
|
roboheart_hercules.menu.FlashFreq.40=40MHz
|
|
roboheart_hercules.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
roboheart_hercules.menu.UploadSpeed.921600=921600
|
|
roboheart_hercules.menu.UploadSpeed.921600.upload.speed=921600
|
|
roboheart_hercules.menu.UploadSpeed.115200=115200
|
|
roboheart_hercules.menu.UploadSpeed.115200.upload.speed=115200
|
|
roboheart_hercules.menu.UploadSpeed.256000.windows=256000
|
|
roboheart_hercules.menu.UploadSpeed.256000.upload.speed=256000
|
|
roboheart_hercules.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
roboheart_hercules.menu.UploadSpeed.230400=230400
|
|
roboheart_hercules.menu.UploadSpeed.230400.upload.speed=230400
|
|
roboheart_hercules.menu.UploadSpeed.460800.linux=460800
|
|
roboheart_hercules.menu.UploadSpeed.460800.macosx=460800
|
|
roboheart_hercules.menu.UploadSpeed.460800.upload.speed=460800
|
|
roboheart_hercules.menu.UploadSpeed.512000.windows=512000
|
|
roboheart_hercules.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
roboheart_hercules.menu.DebugLevel.none=None
|
|
roboheart_hercules.menu.DebugLevel.none.build.code_debug=0
|
|
roboheart_hercules.menu.DebugLevel.error=Error
|
|
roboheart_hercules.menu.DebugLevel.error.build.code_debug=1
|
|
roboheart_hercules.menu.DebugLevel.warn=Warn
|
|
roboheart_hercules.menu.DebugLevel.warn.build.code_debug=2
|
|
roboheart_hercules.menu.DebugLevel.info=Info
|
|
roboheart_hercules.menu.DebugLevel.info.build.code_debug=3
|
|
roboheart_hercules.menu.DebugLevel.debug=Debug
|
|
roboheart_hercules.menu.DebugLevel.debug.build.code_debug=4
|
|
roboheart_hercules.menu.DebugLevel.verbose=Verbose
|
|
roboheart_hercules.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
roboheart_hercules.menu.EraseFlash.none=Disabled
|
|
roboheart_hercules.menu.EraseFlash.none.upload.erase_cmd=
|
|
roboheart_hercules.menu.EraseFlash.all=Enabled
|
|
roboheart_hercules.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
VALTRACK_V4_VTS_ESP32_C3.name=VALTRACK_V4_VTS_ESP32_C3
|
|
|
|
VALTRACK_V4_VTS_ESP32_C3.bootloader.tool=esptool_py
|
|
VALTRACK_V4_VTS_ESP32_C3.bootloader.tool.default=esptool_py
|
|
|
|
VALTRACK_V4_VTS_ESP32_C3.upload.tool=esptool_py
|
|
VALTRACK_V4_VTS_ESP32_C3.upload.tool.default=esptool_py
|
|
VALTRACK_V4_VTS_ESP32_C3.upload.tool.network=esp_ota
|
|
|
|
VALTRACK_V4_VTS_ESP32_C3.upload.maximum_size=1310720
|
|
VALTRACK_V4_VTS_ESP32_C3.upload.maximum_data_size=327680
|
|
VALTRACK_V4_VTS_ESP32_C3.upload.flags=
|
|
VALTRACK_V4_VTS_ESP32_C3.upload.extra_flags=
|
|
VALTRACK_V4_VTS_ESP32_C3.upload.use_1200bps_touch=false
|
|
VALTRACK_V4_VTS_ESP32_C3.upload.wait_for_upload_port=false
|
|
|
|
VALTRACK_V4_VTS_ESP32_C3.serial.disableDTR=false
|
|
VALTRACK_V4_VTS_ESP32_C3.serial.disableRTS=false
|
|
|
|
VALTRACK_V4_VTS_ESP32_C3.build.tarch=riscv32
|
|
VALTRACK_V4_VTS_ESP32_C3.build.target=esp
|
|
VALTRACK_V4_VTS_ESP32_C3.build.mcu=esp32c3
|
|
VALTRACK_V4_VTS_ESP32_C3.build.core=esp32
|
|
VALTRACK_V4_VTS_ESP32_C3.build.variant=VALTRACK_V4_VTS_ESP32_C3
|
|
VALTRACK_V4_VTS_ESP32_C3.build.board=VALTRACK_V4_VTS_ESP32_C3
|
|
VALTRACK_V4_VTS_ESP32_C3.build.bootloader_addr=0x0
|
|
|
|
VALTRACK_V4_VTS_ESP32_C3.build.cdc_on_boot=1
|
|
VALTRACK_V4_VTS_ESP32_C3.build.f_cpu=160000000L
|
|
VALTRACK_V4_VTS_ESP32_C3.build.flash_size=4MB
|
|
VALTRACK_V4_VTS_ESP32_C3.build.flash_freq=80m
|
|
VALTRACK_V4_VTS_ESP32_C3.build.flash_mode=qio
|
|
VALTRACK_V4_VTS_ESP32_C3.build.boot=qio
|
|
VALTRACK_V4_VTS_ESP32_C3.build.partitions=default
|
|
VALTRACK_V4_VTS_ESP32_C3.build.defines=
|
|
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.CDCOnBoot.default=Enabled
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.CDCOnBoot.cdc=Disabled
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
|
|
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.default.build.partitions=default
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.CPUFreq.160=160MHz (WiFi)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.CPUFreq.80=80MHz (WiFi)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.CPUFreq.40=40MHz
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.CPUFreq.20=20MHz
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.CPUFreq.10=10MHz
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashMode.qio=QIO
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashMode.qio.build.flash_mode=dio
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashMode.qio.build.boot=qio
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashMode.dio=DIO
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashMode.dio.build.flash_mode=dio
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashMode.dio.build.boot=dio
|
|
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashFreq.80=80MHz
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashFreq.80.build.flash_freq=80m
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashFreq.40=40MHz
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashSize.4M=4MB (32Mb)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashSize.4M.build.flash_size=4MB
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashSize.8M=8MB (64Mb)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashSize.8M.build.flash_size=8MB
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashSize.8M.build.partitions=default_8MB
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashSize.2M=2MB (16Mb)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashSize.2M.build.flash_size=2MB
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashSize.2M.build.partitions=minimal
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashSize.16M=16MB (128Mb)
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.UploadSpeed.921600=921600
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.UploadSpeed.921600.upload.speed=921600
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.UploadSpeed.115200=115200
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.UploadSpeed.115200.upload.speed=115200
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.UploadSpeed.256000.windows=256000
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.UploadSpeed.256000.upload.speed=256000
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.UploadSpeed.230400=230400
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.UploadSpeed.230400.upload.speed=230400
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.UploadSpeed.460800.linux=460800
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.UploadSpeed.460800.macosx=460800
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.UploadSpeed.460800.upload.speed=460800
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.UploadSpeed.512000.windows=512000
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.DebugLevel.none=None
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.DebugLevel.none.build.code_debug=0
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.DebugLevel.error=Error
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.DebugLevel.error.build.code_debug=1
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.DebugLevel.warn=Warn
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.DebugLevel.warn.build.code_debug=2
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.DebugLevel.info=Info
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.DebugLevel.info.build.code_debug=3
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.DebugLevel.debug=Debug
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.DebugLevel.debug.build.code_debug=4
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.DebugLevel.verbose=Verbose
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.EraseFlash.none=Disabled
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.EraseFlash.none.upload.erase_cmd=
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.EraseFlash.all=Enabled
|
|
VALTRACK_V4_VTS_ESP32_C3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
VALTRACK_V4_MFW_ESP32_C3.name=VALTRACK_V4_MFW_ESP32_C3
|
|
|
|
VALTRACK_V4_MFW_ESP32_C3.bootloader.tool=esptool_py
|
|
VALTRACK_V4_MFW_ESP32_C3.bootloader.tool.default=esptool_py
|
|
|
|
VALTRACK_V4_MFW_ESP32_C3.upload.tool=esptool_py
|
|
VALTRACK_V4_MFW_ESP32_C3.upload.tool.default=esptool_py
|
|
VALTRACK_V4_MFW_ESP32_C3.upload.tool.network=esp_ota
|
|
|
|
VALTRACK_V4_MFW_ESP32_C3.upload.maximum_size=1310720
|
|
VALTRACK_V4_MFW_ESP32_C3.upload.maximum_data_size=327680
|
|
VALTRACK_V4_MFW_ESP32_C3.upload.flags=
|
|
VALTRACK_V4_MFW_ESP32_C3.upload.extra_flags=
|
|
VALTRACK_V4_MFW_ESP32_C3.upload.use_1200bps_touch=false
|
|
VALTRACK_V4_MFW_ESP32_C3.upload.wait_for_upload_port=false
|
|
|
|
VALTRACK_V4_MFW_ESP32_C3.serial.disableDTR=false
|
|
VALTRACK_V4_MFW_ESP32_C3.serial.disableRTS=false
|
|
|
|
VALTRACK_V4_MFW_ESP32_C3.build.tarch=riscv32
|
|
VALTRACK_V4_MFW_ESP32_C3.build.target=esp
|
|
VALTRACK_V4_MFW_ESP32_C3.build.mcu=esp32c3
|
|
VALTRACK_V4_MFW_ESP32_C3.build.core=esp32
|
|
VALTRACK_V4_MFW_ESP32_C3.build.variant=VALTRACK_V4_MFW_ESP32_C3
|
|
VALTRACK_V4_MFW_ESP32_C3.build.board=VALTRACK_V4_MFW_ESP32_C3
|
|
VALTRACK_V4_MFW_ESP32_C3.build.bootloader_addr=0x0
|
|
|
|
VALTRACK_V4_MFW_ESP32_C3.build.cdc_on_boot=1
|
|
VALTRACK_V4_MFW_ESP32_C3.build.f_cpu=160000000L
|
|
VALTRACK_V4_MFW_ESP32_C3.build.flash_size=4MB
|
|
VALTRACK_V4_MFW_ESP32_C3.build.flash_freq=80m
|
|
VALTRACK_V4_MFW_ESP32_C3.build.flash_mode=qio
|
|
VALTRACK_V4_MFW_ESP32_C3.build.boot=qio
|
|
VALTRACK_V4_MFW_ESP32_C3.build.partitions=default
|
|
VALTRACK_V4_MFW_ESP32_C3.build.defines=
|
|
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.CDCOnBoot.default=Enabled
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.CDCOnBoot.cdc=Disabled
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
|
|
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.default.build.partitions=default
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.CPUFreq.160=160MHz (WiFi)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.CPUFreq.80=80MHz (WiFi)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.CPUFreq.40=40MHz
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.CPUFreq.20=20MHz
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.CPUFreq.10=10MHz
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashMode.qio=QIO
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashMode.qio.build.flash_mode=dio
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashMode.qio.build.boot=qio
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashMode.dio=DIO
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashMode.dio.build.flash_mode=dio
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashMode.dio.build.boot=dio
|
|
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashFreq.80=80MHz
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashFreq.80.build.flash_freq=80m
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashFreq.40=40MHz
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashSize.4M=4MB (32Mb)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashSize.4M.build.flash_size=4MB
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashSize.8M=8MB (64Mb)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashSize.8M.build.flash_size=8MB
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashSize.8M.build.partitions=default_8MB
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashSize.2M=2MB (16Mb)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashSize.2M.build.flash_size=2MB
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashSize.2M.build.partitions=minimal
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashSize.16M=16MB (128Mb)
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.UploadSpeed.921600=921600
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.UploadSpeed.921600.upload.speed=921600
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.UploadSpeed.115200=115200
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.UploadSpeed.115200.upload.speed=115200
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.UploadSpeed.256000.windows=256000
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.UploadSpeed.256000.upload.speed=256000
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.UploadSpeed.230400=230400
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.UploadSpeed.230400.upload.speed=230400
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.UploadSpeed.460800.linux=460800
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.UploadSpeed.460800.macosx=460800
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.UploadSpeed.460800.upload.speed=460800
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.UploadSpeed.512000.windows=512000
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.DebugLevel.none=None
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.DebugLevel.none.build.code_debug=0
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.DebugLevel.error=Error
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.DebugLevel.error.build.code_debug=1
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.DebugLevel.warn=Warn
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.DebugLevel.warn.build.code_debug=2
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.DebugLevel.info=Info
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.DebugLevel.info.build.code_debug=3
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.DebugLevel.debug=Debug
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.DebugLevel.debug.build.code_debug=4
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.DebugLevel.verbose=Verbose
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.EraseFlash.none=Disabled
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.EraseFlash.none.upload.erase_cmd=
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.EraseFlash.all=Enabled
|
|
VALTRACK_V4_MFW_ESP32_C3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
Edgebox-ESP-100.name=Edgebox-ESP-100
|
|
|
|
Edgebox-ESP-100.bootloader.tool=esptool_py
|
|
Edgebox-ESP-100.bootloader.tool.default=esptool_py
|
|
|
|
Edgebox-ESP-100.upload.tool=esptool_py
|
|
Edgebox-ESP-100.upload.tool.default=esptool_py
|
|
Edgebox-ESP-100.upload.tool.network=esp_ota
|
|
|
|
Edgebox-ESP-100.upload.maximum_size=1310720
|
|
Edgebox-ESP-100.upload.maximum_data_size=327680
|
|
Edgebox-ESP-100.upload.flags=
|
|
Edgebox-ESP-100.upload.extra_flags=
|
|
Edgebox-ESP-100.upload.use_1200bps_touch=false
|
|
Edgebox-ESP-100.upload.wait_for_upload_port=false
|
|
|
|
Edgebox-ESP-100.serial.disableDTR=false
|
|
Edgebox-ESP-100.serial.disableRTS=false
|
|
|
|
Edgebox-ESP-100.build.tarch=xtensa
|
|
Edgebox-ESP-100.build.bootloader_addr=0x0
|
|
Edgebox-ESP-100.build.target=esp32s3
|
|
Edgebox-ESP-100.build.mcu=esp32s3
|
|
Edgebox-ESP-100.build.core=esp32
|
|
Edgebox-ESP-100.build.variant=Edgebox-ESP-100
|
|
Edgebox-ESP-100.build.board=Edgebox-ESP-100
|
|
|
|
Edgebox-ESP-100.build.usb_mode=1
|
|
Edgebox-ESP-100.build.cdc_on_boot=0
|
|
Edgebox-ESP-100.build.msc_on_boot=0
|
|
Edgebox-ESP-100.build.dfu_on_boot=0
|
|
Edgebox-ESP-100.build.f_cpu=240000000L
|
|
Edgebox-ESP-100.build.flash_size=4MB
|
|
Edgebox-ESP-100.build.flash_freq=80m
|
|
Edgebox-ESP-100.build.flash_mode=dio
|
|
Edgebox-ESP-100.build.boot=qio
|
|
Edgebox-ESP-100.build.boot_freq=80m
|
|
Edgebox-ESP-100.build.partitions=default
|
|
Edgebox-ESP-100.build.defines=
|
|
Edgebox-ESP-100.build.loop_core=
|
|
Edgebox-ESP-100.build.event_core=
|
|
Edgebox-ESP-100.build.psram_type=qspi
|
|
Edgebox-ESP-100.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
Edgebox-ESP-100.menu.PSRAM.disabled=Disabled
|
|
Edgebox-ESP-100.menu.PSRAM.disabled.build.defines=
|
|
Edgebox-ESP-100.menu.PSRAM.disabled.build.psram_type=qspi
|
|
Edgebox-ESP-100.menu.PSRAM.enabled=QSPI PSRAM
|
|
Edgebox-ESP-100.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
Edgebox-ESP-100.menu.PSRAM.enabled.build.psram_type=qspi
|
|
Edgebox-ESP-100.menu.PSRAM.opi=OPI PSRAM
|
|
Edgebox-ESP-100.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
Edgebox-ESP-100.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
Edgebox-ESP-100.menu.FlashMode.qio=QIO 80MHz
|
|
Edgebox-ESP-100.menu.FlashMode.qio.build.flash_mode=dio
|
|
Edgebox-ESP-100.menu.FlashMode.qio.build.boot=qio
|
|
Edgebox-ESP-100.menu.FlashMode.qio.build.boot_freq=80m
|
|
Edgebox-ESP-100.menu.FlashMode.qio.build.flash_freq=80m
|
|
Edgebox-ESP-100.menu.FlashMode.qio120=QIO 120MHz
|
|
Edgebox-ESP-100.menu.FlashMode.qio120.build.flash_mode=dio
|
|
Edgebox-ESP-100.menu.FlashMode.qio120.build.boot=qio
|
|
Edgebox-ESP-100.menu.FlashMode.qio120.build.boot_freq=120m
|
|
Edgebox-ESP-100.menu.FlashMode.qio120.build.flash_freq=80m
|
|
Edgebox-ESP-100.menu.FlashMode.dio=DIO 80MHz
|
|
Edgebox-ESP-100.menu.FlashMode.dio.build.flash_mode=dio
|
|
Edgebox-ESP-100.menu.FlashMode.dio.build.boot=dio
|
|
Edgebox-ESP-100.menu.FlashMode.dio.build.boot_freq=80m
|
|
Edgebox-ESP-100.menu.FlashMode.dio.build.flash_freq=80m
|
|
Edgebox-ESP-100.menu.FlashMode.opi=OPI 80MHz
|
|
Edgebox-ESP-100.menu.FlashMode.opi.build.flash_mode=dout
|
|
Edgebox-ESP-100.menu.FlashMode.opi.build.boot=opi
|
|
Edgebox-ESP-100.menu.FlashMode.opi.build.boot_freq=80m
|
|
Edgebox-ESP-100.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
Edgebox-ESP-100.menu.FlashSize.4M=4MB (32Mb)
|
|
Edgebox-ESP-100.menu.FlashSize.4M.build.flash_size=4MB
|
|
Edgebox-ESP-100.menu.FlashSize.8M=8MB (64Mb)
|
|
Edgebox-ESP-100.menu.FlashSize.8M.build.flash_size=8MB
|
|
Edgebox-ESP-100.menu.FlashSize.8M.build.partitions=default_8MB
|
|
Edgebox-ESP-100.menu.FlashSize.16M=16MB (128Mb)
|
|
Edgebox-ESP-100.menu.FlashSize.16M.build.flash_size=16MB
|
|
#Edgebox-ESP-100.menu.FlashSize.32M=32MB (256Mb)
|
|
#Edgebox-ESP-100.menu.FlashSize.32M.build.flash_size=32MB
|
|
|
|
Edgebox-ESP-100.menu.LoopCore.1=Core 1
|
|
Edgebox-ESP-100.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
Edgebox-ESP-100.menu.LoopCore.0=Core 0
|
|
Edgebox-ESP-100.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
Edgebox-ESP-100.menu.EventsCore.1=Core 1
|
|
Edgebox-ESP-100.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
Edgebox-ESP-100.menu.EventsCore.0=Core 0
|
|
Edgebox-ESP-100.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
Edgebox-ESP-100.menu.USBMode.default=Hardware CDC and JTAG
|
|
Edgebox-ESP-100.menu.USBMode.default.build.usb_mode=1
|
|
Edgebox-ESP-100.menu.USBMode.hwcdc=USB-OTG (TinyUSB)
|
|
Edgebox-ESP-100.menu.USBMode.hwcdc.build.usb_mode=0
|
|
|
|
Edgebox-ESP-100.menu.CDCOnBoot.default=Disabled
|
|
Edgebox-ESP-100.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
Edgebox-ESP-100.menu.CDCOnBoot.cdc=Enabled
|
|
Edgebox-ESP-100.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
Edgebox-ESP-100.menu.MSCOnBoot.default=Disabled
|
|
Edgebox-ESP-100.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
Edgebox-ESP-100.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
Edgebox-ESP-100.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
Edgebox-ESP-100.menu.DFUOnBoot.default=Disabled
|
|
Edgebox-ESP-100.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
Edgebox-ESP-100.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
Edgebox-ESP-100.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
Edgebox-ESP-100.menu.UploadMode.default=UART0 / Hardware CDC
|
|
Edgebox-ESP-100.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
Edgebox-ESP-100.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
Edgebox-ESP-100.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
Edgebox-ESP-100.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
Edgebox-ESP-100.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
Edgebox-ESP-100.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
Edgebox-ESP-100.menu.PartitionScheme.default.build.partitions=default
|
|
Edgebox-ESP-100.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
Edgebox-ESP-100.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
Edgebox-ESP-100.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
Edgebox-ESP-100.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
Edgebox-ESP-100.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
Edgebox-ESP-100.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
Edgebox-ESP-100.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
Edgebox-ESP-100.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
Edgebox-ESP-100.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
Edgebox-ESP-100.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
Edgebox-ESP-100.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
Edgebox-ESP-100.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
Edgebox-ESP-100.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
Edgebox-ESP-100.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
Edgebox-ESP-100.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
Edgebox-ESP-100.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
Edgebox-ESP-100.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
Edgebox-ESP-100.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
Edgebox-ESP-100.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
Edgebox-ESP-100.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
Edgebox-ESP-100.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
Edgebox-ESP-100.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
Edgebox-ESP-100.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
Edgebox-ESP-100.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
Edgebox-ESP-100.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
Edgebox-ESP-100.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
Edgebox-ESP-100.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
Edgebox-ESP-100.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
Edgebox-ESP-100.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
Edgebox-ESP-100.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
Edgebox-ESP-100.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
Edgebox-ESP-100.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
Edgebox-ESP-100.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
Edgebox-ESP-100.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
Edgebox-ESP-100.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
Edgebox-ESP-100.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
Edgebox-ESP-100.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
Edgebox-ESP-100.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
Edgebox-ESP-100.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
Edgebox-ESP-100.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
Edgebox-ESP-100.menu.CPUFreq.240=240MHz (WiFi)
|
|
Edgebox-ESP-100.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
Edgebox-ESP-100.menu.CPUFreq.160=160MHz (WiFi)
|
|
Edgebox-ESP-100.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
Edgebox-ESP-100.menu.CPUFreq.80=80MHz (WiFi)
|
|
Edgebox-ESP-100.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
Edgebox-ESP-100.menu.CPUFreq.40=40MHz
|
|
Edgebox-ESP-100.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
Edgebox-ESP-100.menu.CPUFreq.20=20MHz
|
|
Edgebox-ESP-100.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
Edgebox-ESP-100.menu.CPUFreq.10=10MHz
|
|
Edgebox-ESP-100.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
Edgebox-ESP-100.menu.UploadSpeed.921600=921600
|
|
Edgebox-ESP-100.menu.UploadSpeed.921600.upload.speed=921600
|
|
Edgebox-ESP-100.menu.UploadSpeed.115200=115200
|
|
Edgebox-ESP-100.menu.UploadSpeed.115200.upload.speed=115200
|
|
Edgebox-ESP-100.menu.UploadSpeed.256000.windows=256000
|
|
Edgebox-ESP-100.menu.UploadSpeed.256000.upload.speed=256000
|
|
Edgebox-ESP-100.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
Edgebox-ESP-100.menu.UploadSpeed.230400=230400
|
|
Edgebox-ESP-100.menu.UploadSpeed.230400.upload.speed=230400
|
|
Edgebox-ESP-100.menu.UploadSpeed.460800.linux=460800
|
|
Edgebox-ESP-100.menu.UploadSpeed.460800.macosx=460800
|
|
Edgebox-ESP-100.menu.UploadSpeed.460800.upload.speed=460800
|
|
Edgebox-ESP-100.menu.UploadSpeed.512000.windows=512000
|
|
Edgebox-ESP-100.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
Edgebox-ESP-100.menu.DebugLevel.none=None
|
|
Edgebox-ESP-100.menu.DebugLevel.none.build.code_debug=0
|
|
Edgebox-ESP-100.menu.DebugLevel.error=Error
|
|
Edgebox-ESP-100.menu.DebugLevel.error.build.code_debug=1
|
|
Edgebox-ESP-100.menu.DebugLevel.warn=Warn
|
|
Edgebox-ESP-100.menu.DebugLevel.warn.build.code_debug=2
|
|
Edgebox-ESP-100.menu.DebugLevel.info=Info
|
|
Edgebox-ESP-100.menu.DebugLevel.info.build.code_debug=3
|
|
Edgebox-ESP-100.menu.DebugLevel.debug=Debug
|
|
Edgebox-ESP-100.menu.DebugLevel.debug.build.code_debug=4
|
|
Edgebox-ESP-100.menu.DebugLevel.verbose=Verbose
|
|
Edgebox-ESP-100.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
Edgebox-ESP-100.menu.EraseFlash.none=Disabled
|
|
Edgebox-ESP-100.menu.EraseFlash.none.upload.erase_cmd=
|
|
Edgebox-ESP-100.menu.EraseFlash.all=Enabled
|
|
Edgebox-ESP-100.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
crabik_slot_esp32_s3.name=Crabik Slot ESP32-S3
|
|
|
|
crabik_slot_esp32_s3.bootloader.tool=esptool_py
|
|
crabik_slot_esp32_s3.bootloader.tool.default=esptool_py
|
|
|
|
crabik_slot_esp32_s3.upload.tool=esptool_py
|
|
crabik_slot_esp32_s3.upload.tool.default=esptool_py
|
|
crabik_slot_esp32_s3.upload.tool.network=esp_ota
|
|
|
|
crabik_slot_esp32_s3.upload.maximum_size=1310720
|
|
crabik_slot_esp32_s3.upload.maximum_data_size=327680
|
|
crabik_slot_esp32_s3.upload.speed=921600
|
|
crabik_slot_esp32_s3.upload.flags=
|
|
crabik_slot_esp32_s3.upload.extra_flags=
|
|
crabik_slot_esp32_s3.upload.use_1200bps_touch=false
|
|
crabik_slot_esp32_s3.upload.wait_for_upload_port=false
|
|
|
|
crabik_slot_esp32_s3.serial.disableDTR=false
|
|
crabik_slot_esp32_s3.serial.disableRTS=false
|
|
|
|
crabik_slot_esp32_s3.build.tarch=xtensa
|
|
crabik_slot_esp32_s3.build.bootloader_addr=0x0
|
|
crabik_slot_esp32_s3.build.target=esp32s3
|
|
crabik_slot_esp32_s3.build.mcu=esp32s3
|
|
crabik_slot_esp32_s3.build.core=esp32
|
|
crabik_slot_esp32_s3.build.variant=crabik_slot_esp32_s3
|
|
crabik_slot_esp32_s3.build.board=CRABIK_SLOT_ESP32_S3
|
|
|
|
crabik_slot_esp32_s3.build.usb_mode=0
|
|
crabik_slot_esp32_s3.build.cdc_on_boot=0
|
|
crabik_slot_esp32_s3.build.msc_on_boot=0
|
|
crabik_slot_esp32_s3.build.dfu_on_boot=0
|
|
crabik_slot_esp32_s3.build.f_cpu=240000000L
|
|
crabik_slot_esp32_s3.build.flash_size=8MB
|
|
crabik_slot_esp32_s3.build.flash_freq=80m
|
|
crabik_slot_esp32_s3.build.flash_mode=dio
|
|
crabik_slot_esp32_s3.build.boot=qio
|
|
crabik_slot_esp32_s3.build.partitions=default
|
|
crabik_slot_esp32_s3.build.defines=
|
|
crabik_slot_esp32_s3.build.memory_type=qio_qspi
|
|
crabik_slot_esp32_s3.build.loop_core=
|
|
crabik_slot_esp32_s3.build.event_core=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
crabik_slot_esp32_s3.menu.JTAGAdapter.default=Disabled
|
|
crabik_slot_esp32_s3.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
crabik_slot_esp32_s3.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
crabik_slot_esp32_s3.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
crabik_slot_esp32_s3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
|
|
crabik_slot_esp32_s3.menu.LoopCore.1=Core 1
|
|
crabik_slot_esp32_s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
crabik_slot_esp32_s3.menu.LoopCore.0=Core 0
|
|
crabik_slot_esp32_s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
crabik_slot_esp32_s3.menu.EventsCore.1=Core 1
|
|
crabik_slot_esp32_s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
crabik_slot_esp32_s3.menu.EventsCore.0=Core 0
|
|
crabik_slot_esp32_s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
crabik_slot_esp32_s3.menu.CDCOnBoot.default=Enabled (Requires Hardware CDC and JTAG Mode)
|
|
crabik_slot_esp32_s3.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
crabik_slot_esp32_s3.menu.CDCOnBoot.discdc=Disabled
|
|
crabik_slot_esp32_s3.menu.CDCOnBoot.discdc.build.cdc_on_boot=0
|
|
|
|
crabik_slot_esp32_s3.menu.MSCOnBoot.default=Disabled
|
|
crabik_slot_esp32_s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
crabik_slot_esp32_s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
crabik_slot_esp32_s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
crabik_slot_esp32_s3.menu.USBMode.default=Hardware CDC and JTAG
|
|
crabik_slot_esp32_s3.menu.USBMode.default.build.usb_mode=1
|
|
crabik_slot_esp32_s3.menu.USBMode.default.build.cdc_on_boot=1
|
|
crabik_slot_esp32_s3.menu.USBMode.usbotg=USB-OTG
|
|
crabik_slot_esp32_s3.menu.USBMode.usbotg.build.usb_mode=0
|
|
crabik_slot_esp32_s3.menu.USBMode.usbotg.build.cdc_on_boot=0
|
|
|
|
crabik_slot_esp32_s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
crabik_slot_esp32_s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
crabik_slot_esp32_s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
crabik_slot_esp32_s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
crabik_slot_esp32_s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
crabik_slot_esp32_s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
crabik_slot_esp32_s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
crabik_slot_esp32_s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
crabik_slot_esp32_s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
crabik_slot_esp32_s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
crabik_slot_esp32_s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
crabik_slot_esp32_s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.default=8M Flash (3MB APP/1.5MB FATFS)
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.default.build.partitions=default_8MB
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.default.upload.maximum_size=3342336
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.default_4MB=4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.default_4MB.build.partitions=default
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.defaultffat=4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
crabik_slot_esp32_s3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
|
|
crabik_slot_esp32_s3.menu.UploadSpeed.921600=921600
|
|
crabik_slot_esp32_s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
crabik_slot_esp32_s3.menu.UploadSpeed.115200=115200
|
|
crabik_slot_esp32_s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
crabik_slot_esp32_s3.menu.UploadSpeed.256000.windows=256000
|
|
crabik_slot_esp32_s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
crabik_slot_esp32_s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
crabik_slot_esp32_s3.menu.UploadSpeed.230400=230400
|
|
crabik_slot_esp32_s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
crabik_slot_esp32_s3.menu.UploadSpeed.460800.linux=460800
|
|
crabik_slot_esp32_s3.menu.UploadSpeed.460800.macosx=460800
|
|
crabik_slot_esp32_s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
crabik_slot_esp32_s3.menu.UploadSpeed.512000.windows=512000
|
|
crabik_slot_esp32_s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
crabik_slot_esp32_s3.menu.DebugLevel.none=None
|
|
crabik_slot_esp32_s3.menu.DebugLevel.none.build.code_debug=0
|
|
crabik_slot_esp32_s3.menu.DebugLevel.error=Error
|
|
crabik_slot_esp32_s3.menu.DebugLevel.error.build.code_debug=1
|
|
crabik_slot_esp32_s3.menu.DebugLevel.warn=Warn
|
|
crabik_slot_esp32_s3.menu.DebugLevel.warn.build.code_debug=2
|
|
crabik_slot_esp32_s3.menu.DebugLevel.info=Info
|
|
crabik_slot_esp32_s3.menu.DebugLevel.info.build.code_debug=3
|
|
crabik_slot_esp32_s3.menu.DebugLevel.debug=Debug
|
|
crabik_slot_esp32_s3.menu.DebugLevel.debug.build.code_debug=4
|
|
crabik_slot_esp32_s3.menu.DebugLevel.verbose=Verbose
|
|
crabik_slot_esp32_s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
crabik_slot_esp32_s3.menu.EraseFlash.none=Disabled
|
|
crabik_slot_esp32_s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
crabik_slot_esp32_s3.menu.EraseFlash.all=Enabled
|
|
crabik_slot_esp32_s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
|
|
nebulas3.name=Nebula S3
|
|
|
|
nebulas3.bootloader.tool=esptool_py
|
|
nebulas3.bootloader.tool.default=esptool_py
|
|
|
|
nebulas3.upload.tool=esptool_py
|
|
nebulas3.upload.tool.default=esptool_py
|
|
nebulas3.upload.tool.network=esp_ota
|
|
|
|
nebulas3.upload.maximum_size=1310720
|
|
nebulas3.upload.maximum_data_size=327680
|
|
nebulas3.upload.flags=
|
|
nebulas3.upload.extra_flags=
|
|
nebulas3.upload.use_1200bps_touch=false
|
|
nebulas3.upload.wait_for_upload_port=false
|
|
|
|
nebulas3.serial.disableDTR=false
|
|
nebulas3.serial.disableRTS=false
|
|
|
|
nebulas3.build.tarch=xtensa
|
|
nebulas3.build.bootloader_addr=0x0
|
|
nebulas3.build.target=esp32s3
|
|
nebulas3.build.mcu=esp32s3
|
|
nebulas3.build.core=esp32
|
|
nebulas3.build.variant=Nebula_S3
|
|
nebulas3.build.board=NEBULAS3
|
|
|
|
nebulas3.build.usb_mode=1
|
|
nebulas3.build.cdc_on_boot=0
|
|
nebulas3.build.msc_on_boot=0
|
|
nebulas3.build.dfu_on_boot=0
|
|
nebulas3.build.f_cpu=240000000L
|
|
nebulas3.build.flash_size=4MB
|
|
nebulas3.build.flash_freq=80m
|
|
nebulas3.build.flash_mode=dio
|
|
nebulas3.build.boot=qio
|
|
nebulas3.build.boot_freq=80m
|
|
nebulas3.build.partitions=default
|
|
nebulas3.build.defines=
|
|
nebulas3.build.loop_core=
|
|
nebulas3.build.event_core=
|
|
nebulas3.build.psram_type=qspi
|
|
nebulas3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
nebulas3.menu.JTAGAdapter.default=Disabled
|
|
nebulas3.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
nebulas3.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
nebulas3.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
nebulas3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
nebulas3.menu.JTAGAdapter.external=FTDI Adapter
|
|
nebulas3.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
nebulas3.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
nebulas3.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
nebulas3.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
nebulas3.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
nebulas3.menu.PSRAM.disabled=Disabled
|
|
nebulas3.menu.PSRAM.disabled.build.defines=
|
|
nebulas3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
nebulas3.menu.PSRAM.enabled=QSPI PSRAM
|
|
nebulas3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
nebulas3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
nebulas3.menu.PSRAM.opi=OPI PSRAM
|
|
nebulas3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
nebulas3.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
nebulas3.menu.FlashMode.qio=QIO 80MHz
|
|
nebulas3.menu.FlashMode.qio.build.flash_mode=dio
|
|
nebulas3.menu.FlashMode.qio.build.boot=qio
|
|
nebulas3.menu.FlashMode.qio.build.boot_freq=80m
|
|
nebulas3.menu.FlashMode.qio.build.flash_freq=80m
|
|
nebulas3.menu.FlashMode.qio120=QIO 120MHz
|
|
nebulas3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
nebulas3.menu.FlashMode.qio120.build.boot=qio
|
|
nebulas3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
nebulas3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
nebulas3.menu.FlashMode.dio=DIO 80MHz
|
|
nebulas3.menu.FlashMode.dio.build.flash_mode=dio
|
|
nebulas3.menu.FlashMode.dio.build.boot=dio
|
|
nebulas3.menu.FlashMode.dio.build.boot_freq=80m
|
|
nebulas3.menu.FlashMode.dio.build.flash_freq=80m
|
|
nebulas3.menu.FlashMode.opi=OPI 80MHz
|
|
nebulas3.menu.FlashMode.opi.build.flash_mode=dout
|
|
nebulas3.menu.FlashMode.opi.build.boot=opi
|
|
nebulas3.menu.FlashMode.opi.build.boot_freq=80m
|
|
nebulas3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
nebulas3.menu.FlashSize.4M=4MB (32Mb)
|
|
nebulas3.menu.FlashSize.4M.build.flash_size=4MB
|
|
nebulas3.menu.FlashSize.8M=8MB (64Mb)
|
|
nebulas3.menu.FlashSize.8M.build.flash_size=8MB
|
|
nebulas3.menu.FlashSize.8M.build.partitions=default_8MB
|
|
nebulas3.menu.FlashSize.16M=16MB (128Mb)
|
|
nebulas3.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
nebulas3.menu.LoopCore.1=Core 1
|
|
nebulas3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
nebulas3.menu.LoopCore.0=Core 0
|
|
nebulas3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
nebulas3.menu.EventsCore.1=Core 1
|
|
nebulas3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
nebulas3.menu.EventsCore.0=Core 0
|
|
nebulas3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
nebulas3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
nebulas3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
nebulas3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
nebulas3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
nebulas3.menu.CDCOnBoot.default= Enabled
|
|
nebulas3.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
nebulas3.menu.CDCOnBoot.cdc=Disabled
|
|
nebulas3.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
|
|
|
|
nebulas3.menu.MSCOnBoot.default=Disabled
|
|
nebulas3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
nebulas3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
nebulas3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
nebulas3.menu.DFUOnBoot.default=Disabled
|
|
nebulas3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
nebulas3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
nebulas3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
nebulas3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
nebulas3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
nebulas3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
nebulas3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
nebulas3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
nebulas3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
nebulas3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
nebulas3.menu.PartitionScheme.default.build.partitions=default
|
|
nebulas3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
nebulas3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
nebulas3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
nebulas3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
nebulas3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
nebulas3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
nebulas3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
nebulas3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
nebulas3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
nebulas3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
nebulas3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
nebulas3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
nebulas3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
nebulas3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
nebulas3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
nebulas3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
nebulas3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
nebulas3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
nebulas3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
nebulas3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
nebulas3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
nebulas3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
nebulas3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
nebulas3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
nebulas3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
nebulas3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
nebulas3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
nebulas3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
nebulas3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
nebulas3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
nebulas3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
nebulas3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
nebulas3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
nebulas3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
nebulas3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
nebulas3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
nebulas3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
nebulas3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
nebulas3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
nebulas3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
nebulas3.menu.CPUFreq.240=240MHz (WiFi)
|
|
nebulas3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
nebulas3.menu.CPUFreq.160=160MHz (WiFi)
|
|
nebulas3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
nebulas3.menu.CPUFreq.80=80MHz (WiFi)
|
|
nebulas3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
nebulas3.menu.CPUFreq.40=40MHz
|
|
nebulas3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
nebulas3.menu.CPUFreq.20=20MHz
|
|
nebulas3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
nebulas3.menu.CPUFreq.10=10MHz
|
|
nebulas3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
nebulas3.menu.UploadSpeed.921600=921600
|
|
nebulas3.menu.UploadSpeed.921600.upload.speed=921600
|
|
nebulas3.menu.UploadSpeed.115200=115200
|
|
nebulas3.menu.UploadSpeed.115200.upload.speed=115200
|
|
nebulas3.menu.UploadSpeed.256000.windows=256000
|
|
nebulas3.menu.UploadSpeed.256000.upload.speed=256000
|
|
nebulas3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
nebulas3.menu.UploadSpeed.230400=230400
|
|
nebulas3.menu.UploadSpeed.230400.upload.speed=230400
|
|
nebulas3.menu.UploadSpeed.460800.linux=460800
|
|
nebulas3.menu.UploadSpeed.460800.macosx=460800
|
|
nebulas3.menu.UploadSpeed.460800.upload.speed=460800
|
|
nebulas3.menu.UploadSpeed.512000.windows=512000
|
|
nebulas3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
nebulas3.menu.DebugLevel.none=None
|
|
nebulas3.menu.DebugLevel.none.build.code_debug=0
|
|
nebulas3.menu.DebugLevel.error=Error
|
|
nebulas3.menu.DebugLevel.error.build.code_debug=1
|
|
nebulas3.menu.DebugLevel.warn=Warn
|
|
nebulas3.menu.DebugLevel.warn.build.code_debug=2
|
|
nebulas3.menu.DebugLevel.info=Info
|
|
nebulas3.menu.DebugLevel.info.build.code_debug=3
|
|
nebulas3.menu.DebugLevel.debug=Debug
|
|
nebulas3.menu.DebugLevel.debug.build.code_debug=4
|
|
nebulas3.menu.DebugLevel.verbose=Verbose
|
|
nebulas3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
nebulas3.menu.EraseFlash.none=Disabled
|
|
nebulas3.menu.EraseFlash.none.upload.erase_cmd=
|
|
nebulas3.menu.EraseFlash.all=Enabled
|
|
nebulas3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
lionbits3.name=Lion:Bit S3 STEM Dev Board
|
|
|
|
lionbits3.bootloader.tool=esptool_py
|
|
lionbits3.bootloader.tool.default=esptool_py
|
|
|
|
lionbits3.upload.tool=esptool_py
|
|
lionbits3.upload.tool.default=esptool_py
|
|
lionbits3.upload.tool.network=esp_ota
|
|
|
|
lionbits3.upload.maximum_size=1310720
|
|
lionbits3.upload.maximum_data_size=327680
|
|
lionbits3.upload.flags=
|
|
lionbits3.upload.extra_flags=
|
|
lionbits3.upload.use_1200bps_touch=false
|
|
lionbits3.upload.wait_for_upload_port=false
|
|
|
|
lionbits3.serial.disableDTR=false
|
|
lionbits3.serial.disableRTS=false
|
|
|
|
lionbits3.build.tarch=xtensa
|
|
lionbits3.build.bootloader_addr=0x0
|
|
lionbits3.build.target=esp32s3
|
|
lionbits3.build.mcu=esp32s3
|
|
lionbits3.build.core=esp32
|
|
lionbits3.build.variant=lionbits3
|
|
lionbits3.build.board=LIONBITS3_DEV
|
|
|
|
|
|
lionbits3.build.usb_mode=1
|
|
lionbits3.build.cdc_on_boot=0
|
|
lionbits3.build.msc_on_boot=0
|
|
lionbits3.build.dfu_on_boot=0
|
|
lionbits3.build.f_cpu=240000000L
|
|
lionbits3.build.flash_size=4MB
|
|
lionbits3.build.flash_freq=80m
|
|
lionbits3.build.flash_mode=dio
|
|
lionbits3.build.boot=qio
|
|
lionbits3.build.boot_freq=80m
|
|
lionbits3.build.partitions=default
|
|
lionbits3.build.defines=
|
|
lionbits3.build.loop_core=
|
|
lionbits3.build.event_core=
|
|
lionbits3.build.psram_type=qspi
|
|
lionbits3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
|
|
lionbits3.menu.JTAGAdapter.default=Disabled
|
|
lionbits3.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
lionbits3.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
lionbits3.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
lionbits3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
lionbits3.menu.JTAGAdapter.external=FTDI Adapter
|
|
lionbits3.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
lionbits3.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
lionbits3.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
lionbits3.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
lionbits3.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
lionbits3.menu.PSRAM.disabled=Disabled
|
|
lionbits3.menu.PSRAM.disabled.build.defines=
|
|
lionbits3.menu.PSRAM.disabled.build.psram_type=qspi
|
|
lionbits3.menu.PSRAM.enabled=QSPI PSRAM
|
|
lionbits3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
lionbits3.menu.PSRAM.enabled.build.psram_type=qspi
|
|
lionbits3.menu.PSRAM.opi=OPI PSRAM
|
|
lionbits3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
lionbits3.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
lionbits3.menu.FlashMode.qio=QIO 80MHz
|
|
lionbits3.menu.FlashMode.qio.build.flash_mode=dio
|
|
lionbits3.menu.FlashMode.qio.build.boot=qio
|
|
lionbits3.menu.FlashMode.qio.build.boot_freq=80m
|
|
lionbits3.menu.FlashMode.qio.build.flash_freq=80m
|
|
lionbits3.menu.FlashMode.qio120=QIO 120MHz
|
|
lionbits3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
lionbits3.menu.FlashMode.qio120.build.boot=qio
|
|
lionbits3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
lionbits3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
lionbits3.menu.FlashMode.dio=DIO 80MHz
|
|
lionbits3.menu.FlashMode.dio.build.flash_mode=dio
|
|
lionbits3.menu.FlashMode.dio.build.boot=dio
|
|
lionbits3.menu.FlashMode.dio.build.boot_freq=80m
|
|
lionbits3.menu.FlashMode.dio.build.flash_freq=80m
|
|
lionbits3.menu.FlashMode.opi=OPI 80MHz
|
|
lionbits3.menu.FlashMode.opi.build.flash_mode=dout
|
|
lionbits3.menu.FlashMode.opi.build.boot=opi
|
|
lionbits3.menu.FlashMode.opi.build.boot_freq=80m
|
|
lionbits3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
lionbits3.menu.FlashSize.4M=4MB (32Mb)
|
|
lionbits3.menu.FlashSize.4M.build.flash_size=4MB
|
|
lionbits3.menu.FlashSize.8M=8MB (64Mb)
|
|
lionbits3.menu.FlashSize.8M.build.flash_size=8MB
|
|
lionbits3.menu.FlashSize.8M.build.partitions=default_8MB
|
|
lionbits3.menu.FlashSize.16M=16MB (128Mb)
|
|
lionbits3.menu.FlashSize.16M.build.flash_size=16MB
|
|
#lionbits3.menu.FlashSize.32M=32MB (256Mb)
|
|
#lionbits3.menu.FlashSize.32M.build.flash_size=32MB
|
|
|
|
lionbits3.menu.LoopCore.1=Core 1
|
|
lionbits3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
lionbits3.menu.LoopCore.0=Core 0
|
|
lionbits3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
lionbits3.menu.EventsCore.1=Core 1
|
|
lionbits3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
lionbits3.menu.EventsCore.0=Core 0
|
|
lionbits3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
lionbits3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
lionbits3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
lionbits3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
lionbits3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
lionbits3.menu.CDCOnBoot.default=Disabled
|
|
lionbits3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
lionbits3.menu.CDCOnBoot.cdc=Enabled
|
|
lionbits3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
lionbits3.menu.MSCOnBoot.default=Disabled
|
|
lionbits3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
lionbits3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
lionbits3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
lionbits3.menu.DFUOnBoot.default=Disabled
|
|
lionbits3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
lionbits3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
lionbits3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
lionbits3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
lionbits3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
lionbits3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
lionbits3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
lionbits3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
lionbits3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
lionbits3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
lionbits3.menu.PartitionScheme.default.build.partitions=default
|
|
lionbits3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
lionbits3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
lionbits3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
lionbits3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
lionbits3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
lionbits3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
lionbits3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
lionbits3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
lionbits3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
lionbits3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
lionbits3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
lionbits3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
lionbits3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
lionbits3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
lionbits3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
lionbits3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
lionbits3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
lionbits3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
lionbits3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
lionbits3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
lionbits3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
lionbits3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
lionbits3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
lionbits3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
lionbits3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
lionbits3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
lionbits3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
lionbits3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
lionbits3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
lionbits3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
lionbits3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
lionbits3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
lionbits3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
lionbits3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
lionbits3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
lionbits3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
lionbits3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
lionbits3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
lionbits3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
lionbits3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
lionbits3.menu.CPUFreq.240=240MHz (WiFi)
|
|
lionbits3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
lionbits3.menu.CPUFreq.160=160MHz (WiFi)
|
|
lionbits3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
lionbits3.menu.CPUFreq.80=80MHz (WiFi)
|
|
lionbits3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
lionbits3.menu.CPUFreq.40=40MHz
|
|
lionbits3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
lionbits3.menu.CPUFreq.20=20MHz
|
|
lionbits3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
lionbits3.menu.CPUFreq.10=10MHz
|
|
lionbits3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
lionbits3.menu.UploadSpeed.921600=921600
|
|
lionbits3.menu.UploadSpeed.921600.upload.speed=921600
|
|
lionbits3.menu.UploadSpeed.115200=115200
|
|
lionbits3.menu.UploadSpeed.115200.upload.speed=115200
|
|
lionbits3.menu.UploadSpeed.256000.windows=256000
|
|
lionbits3.menu.UploadSpeed.256000.upload.speed=256000
|
|
lionbits3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
lionbits3.menu.UploadSpeed.230400=230400
|
|
lionbits3.menu.UploadSpeed.230400.upload.speed=230400
|
|
lionbits3.menu.UploadSpeed.460800.linux=460800
|
|
lionbits3.menu.UploadSpeed.460800.macosx=460800
|
|
lionbits3.menu.UploadSpeed.460800.upload.speed=460800
|
|
lionbits3.menu.UploadSpeed.512000.windows=512000
|
|
lionbits3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
lionbits3.menu.DebugLevel.none=None
|
|
lionbits3.menu.DebugLevel.none.build.code_debug=0
|
|
lionbits3.menu.DebugLevel.error=Error
|
|
lionbits3.menu.DebugLevel.error.build.code_debug=1
|
|
lionbits3.menu.DebugLevel.warn=Warn
|
|
lionbits3.menu.DebugLevel.warn.build.code_debug=2
|
|
lionbits3.menu.DebugLevel.info=Info
|
|
lionbits3.menu.DebugLevel.info.build.code_debug=3
|
|
lionbits3.menu.DebugLevel.debug=Debug
|
|
lionbits3.menu.DebugLevel.debug.build.code_debug=4
|
|
lionbits3.menu.DebugLevel.verbose=Verbose
|
|
lionbits3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
lionbits3.menu.EraseFlash.none=Disabled
|
|
lionbits3.menu.EraseFlash.none.upload.erase_cmd=
|
|
lionbits3.menu.EraseFlash.all=Enabled
|
|
lionbits3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
|
|
gen4-ESP32-S3R8n16.name=4D Systems gen4-ESP32 16MB Modules (ESP32-S3R8n16)
|
|
|
|
gen4-ESP32-S3R8n16.bootloader.tool=esptool_py
|
|
gen4-ESP32-S3R8n16.bootloader.tool.default=esptool_py
|
|
|
|
gen4-ESP32-S3R8n16.upload.tool=esptool_py
|
|
gen4-ESP32-S3R8n16.upload.tool.default=esptool_py
|
|
gen4-ESP32-S3R8n16.upload.tool.network=esp_ota
|
|
|
|
gen4-ESP32-S3R8n16.upload.maximum_size=1310720
|
|
gen4-ESP32-S3R8n16.upload.maximum_data_size=327680
|
|
gen4-ESP32-S3R8n16.upload.flags=
|
|
gen4-ESP32-S3R8n16.upload.extra_flags=
|
|
gen4-ESP32-S3R8n16.upload.use_1200bps_touch=false
|
|
gen4-ESP32-S3R8n16.upload.wait_for_upload_port=false
|
|
|
|
gen4-ESP32-S3R8n16.serial.disableDTR=false
|
|
gen4-ESP32-S3R8n16.serial.disableRTS=false
|
|
|
|
gen4-ESP32-S3R8n16.build.tarch=xtensa
|
|
gen4-ESP32-S3R8n16.build.bootloader_addr=0x0
|
|
gen4-ESP32-S3R8n16.build.target=esp32s3
|
|
gen4-ESP32-S3R8n16.build.mcu=esp32s3
|
|
gen4-ESP32-S3R8n16.build.core=esp32
|
|
gen4-ESP32-S3R8n16.build.variant=esp32_s3r8n16
|
|
gen4-ESP32-S3R8n16.build.board=ESP32_S3R8N16
|
|
|
|
gen4-ESP32-S3R8n16.build.usb_mode=1
|
|
gen4-ESP32-S3R8n16.build.cdc_on_boot=1
|
|
gen4-ESP32-S3R8n16.build.msc_on_boot=0
|
|
gen4-ESP32-S3R8n16.build.dfu_on_boot=0
|
|
gen4-ESP32-S3R8n16.build.f_cpu=240000000L
|
|
gen4-ESP32-S3R8n16.build.flash_size=16MB (128Mb)
|
|
gen4-ESP32-S3R8n16.build.flash_freq=80m
|
|
gen4-ESP32-S3R8n16.build.flash_mode=dio
|
|
gen4-ESP32-S3R8n16.build.boot=qio
|
|
gen4-ESP32-S3R8n16.build.boot_freq=80m
|
|
gen4-ESP32-S3R8n16.build.partitions=default
|
|
gen4-ESP32-S3R8n16.build.defines=-DBOARD_HAS_PSRAM
|
|
gen4-ESP32-S3R8n16.build.loop_core=
|
|
gen4-ESP32-S3R8n16.build.event_core=
|
|
gen4-ESP32-S3R8n16.build.psram_type=opi
|
|
gen4-ESP32-S3R8n16.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
gen4-ESP32-S3R8n16.menu.PSRAM.opi=OPI PSRAM
|
|
gen4-ESP32-S3R8n16.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
gen4-ESP32-S3R8n16.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
gen4-ESP32-S3R8n16.menu.FlashMode.qio=QIO 80MHz
|
|
gen4-ESP32-S3R8n16.menu.FlashMode.qio.build.flash_mode=dio
|
|
gen4-ESP32-S3R8n16.menu.FlashMode.qio.build.boot=qio
|
|
gen4-ESP32-S3R8n16.menu.FlashMode.qio.build.boot_freq=80m
|
|
gen4-ESP32-S3R8n16.menu.FlashMode.qio.build.flash_freq=80m
|
|
|
|
gen4-ESP32-S3R8n16.menu.FlashSize.16M=16MB (128Mb)
|
|
gen4-ESP32-S3R8n16.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
gen4-ESP32-S3R8n16.menu.LoopCore.1=Core 1
|
|
gen4-ESP32-S3R8n16.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
gen4-ESP32-S3R8n16.menu.LoopCore.0=Core 0
|
|
gen4-ESP32-S3R8n16.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
gen4-ESP32-S3R8n16.menu.EventsCore.1=Core 1
|
|
gen4-ESP32-S3R8n16.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
gen4-ESP32-S3R8n16.menu.EventsCore.0=Core 0
|
|
gen4-ESP32-S3R8n16.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
gen4-ESP32-S3R8n16.menu.USBMode.default=Hardware CDC and JTAG
|
|
gen4-ESP32-S3R8n16.menu.USBMode.default.build.usb_mode=1
|
|
gen4-ESP32-S3R8n16.menu.USBMode.hwcdc=USB-OTG (TinyUSB)
|
|
gen4-ESP32-S3R8n16.menu.USBMode.hwcdc.build.usb_mode=0
|
|
|
|
gen4-ESP32-S3R8n16.menu.CDCOnBoot.cdc=Enabled
|
|
gen4-ESP32-S3R8n16.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
gen4-ESP32-S3R8n16.menu.CDCOnBoot.default=Disabled
|
|
gen4-ESP32-S3R8n16.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
gen4-ESP32-S3R8n16.menu.MSCOnBoot.default=Disabled
|
|
gen4-ESP32-S3R8n16.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
gen4-ESP32-S3R8n16.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
gen4-ESP32-S3R8n16.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
gen4-ESP32-S3R8n16.menu.DFUOnBoot.default=Disabled
|
|
gen4-ESP32-S3R8n16.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
gen4-ESP32-S3R8n16.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
gen4-ESP32-S3R8n16.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
gen4-ESP32-S3R8n16.menu.UploadMode.default=UART0 / Hardware CDC
|
|
gen4-ESP32-S3R8n16.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
gen4-ESP32-S3R8n16.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
gen4-ESP32-S3R8n16.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
gen4-ESP32-S3R8n16.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
gen4-ESP32-S3R8n16.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
gen4-ESP32-S3R8n16.menu.PartitionScheme.gen4esp32scheme1=Small App w/ OTA + Huge FS (2MB APP/2MB OTA/12MB SPIFFS)
|
|
gen4-ESP32-S3R8n16.menu.PartitionScheme.gen4esp32scheme1.build.custom_partitions=gen4esp32_2MBapp_2MBota_12MBspiffs
|
|
gen4-ESP32-S3R8n16.menu.PartitionScheme.gen4esp32scheme1.upload.maximum_size=2097152
|
|
gen4-ESP32-S3R8n16.menu.PartitionScheme.gen4esp32scheme2=Medium App w/ OTA + Large FS (4MB APP/4MB OTA/7MB SPIFFS)
|
|
gen4-ESP32-S3R8n16.menu.PartitionScheme.gen4esp32scheme2.build.custom_partitions=gen4esp32_4MBapp_4MBota_7MBspiffs
|
|
gen4-ESP32-S3R8n16.menu.PartitionScheme.gen4esp32scheme2.upload.maximum_size=4718592
|
|
gen4-ESP32-S3R8n16.menu.PartitionScheme.gen4esp32scheme3=Large App w/ OTA (8MB APP/8MB OTA)
|
|
gen4-ESP32-S3R8n16.menu.PartitionScheme.gen4esp32scheme3.build.custom_partitions=gen4esp32_8MBapp_8MBota
|
|
gen4-ESP32-S3R8n16.menu.PartitionScheme.gen4esp32scheme3.upload.maximum_size=8323072
|
|
gen4-ESP32-S3R8n16.menu.PartitionScheme.gen4esp32scheme4=Huge App (16MB APP)
|
|
gen4-ESP32-S3R8n16.menu.PartitionScheme.gen4esp32scheme4.build.custom_partitions=gen4esp32_16MBapp
|
|
gen4-ESP32-S3R8n16.menu.PartitionScheme.gen4esp32scheme4.upload.maximum_size=16646144
|
|
|
|
gen4-ESP32-S3R8n16.menu.CPUFreq.240=240MHz (WiFi)
|
|
gen4-ESP32-S3R8n16.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
gen4-ESP32-S3R8n16.menu.CPUFreq.160=160MHz (WiFi)
|
|
gen4-ESP32-S3R8n16.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
gen4-ESP32-S3R8n16.menu.CPUFreq.80=80MHz (WiFi)
|
|
gen4-ESP32-S3R8n16.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
gen4-ESP32-S3R8n16.menu.CPUFreq.40=40MHz
|
|
gen4-ESP32-S3R8n16.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
gen4-ESP32-S3R8n16.menu.CPUFreq.20=20MHz
|
|
gen4-ESP32-S3R8n16.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
gen4-ESP32-S3R8n16.menu.CPUFreq.10=10MHz
|
|
gen4-ESP32-S3R8n16.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
gen4-ESP32-S3R8n16.menu.UploadSpeed.921600=921600
|
|
gen4-ESP32-S3R8n16.menu.UploadSpeed.921600.upload.speed=921600
|
|
gen4-ESP32-S3R8n16.menu.UploadSpeed.115200=115200
|
|
gen4-ESP32-S3R8n16.menu.UploadSpeed.115200.upload.speed=115200
|
|
gen4-ESP32-S3R8n16.menu.UploadSpeed.256000.windows=256000
|
|
gen4-ESP32-S3R8n16.menu.UploadSpeed.256000.upload.speed=256000
|
|
gen4-ESP32-S3R8n16.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
gen4-ESP32-S3R8n16.menu.UploadSpeed.230400=230400
|
|
gen4-ESP32-S3R8n16.menu.UploadSpeed.230400.upload.speed=230400
|
|
gen4-ESP32-S3R8n16.menu.UploadSpeed.460800.linux=460800
|
|
gen4-ESP32-S3R8n16.menu.UploadSpeed.460800.macosx=460800
|
|
gen4-ESP32-S3R8n16.menu.UploadSpeed.460800.upload.speed=460800
|
|
gen4-ESP32-S3R8n16.menu.UploadSpeed.512000.windows=512000
|
|
gen4-ESP32-S3R8n16.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
gen4-ESP32-S3R8n16.menu.DebugLevel.none=None
|
|
gen4-ESP32-S3R8n16.menu.DebugLevel.none.build.code_debug=0
|
|
gen4-ESP32-S3R8n16.menu.DebugLevel.error=Error
|
|
gen4-ESP32-S3R8n16.menu.DebugLevel.error.build.code_debug=1
|
|
gen4-ESP32-S3R8n16.menu.DebugLevel.warn=Warn
|
|
gen4-ESP32-S3R8n16.menu.DebugLevel.warn.build.code_debug=2
|
|
gen4-ESP32-S3R8n16.menu.DebugLevel.info=Info
|
|
gen4-ESP32-S3R8n16.menu.DebugLevel.info.build.code_debug=3
|
|
gen4-ESP32-S3R8n16.menu.DebugLevel.debug=Debug
|
|
gen4-ESP32-S3R8n16.menu.DebugLevel.debug.build.code_debug=4
|
|
gen4-ESP32-S3R8n16.menu.DebugLevel.verbose=Verbose
|
|
gen4-ESP32-S3R8n16.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
gen4-ESP32-S3R8n16.menu.EraseFlash.none=Disabled
|
|
gen4-ESP32-S3R8n16.menu.EraseFlash.none.upload.erase_cmd=
|
|
gen4-ESP32-S3R8n16.menu.EraseFlash.all=Enabled
|
|
gen4-ESP32-S3R8n16.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
# Namino Rosso
|
|
|
|
namino_rosso.name=Namino Rosso
|
|
|
|
namino_rosso.bootloader.tool=esptool_py
|
|
namino_rosso.bootloader.tool.default=esptool_py
|
|
|
|
namino_rosso.upload.tool=esptool_py
|
|
namino_rosso.upload.tool.default=esptool_py
|
|
namino_rosso.upload.tool.network=esp_ota
|
|
|
|
namino_rosso.upload.maximum_size=1310720
|
|
namino_rosso.upload.maximum_data_size=327680
|
|
namino_rosso.upload.flags=
|
|
namino_rosso.upload.extra_flags=
|
|
namino_rosso.upload.use_1200bps_touch=true
|
|
namino_rosso.upload.wait_for_upload_port=true
|
|
|
|
namino_rosso.serial.disableDTR=false
|
|
namino_rosso.serial.disableRTS=false
|
|
|
|
namino_rosso.build.tarch=xtensa
|
|
namino_rosso.build.bootloader_addr=0x0
|
|
namino_rosso.build.target=esp32s3
|
|
namino_rosso.build.mcu=esp32s3
|
|
namino_rosso.build.core=esp32
|
|
namino_rosso.build.variant=namino_rosso
|
|
namino_rosso.build.board=NAMINO_ROSSO
|
|
|
|
namino_rosso.build.usb_mode=0
|
|
namino_rosso.build.cdc_on_boot=1
|
|
namino_rosso.build.msc_on_boot=0
|
|
namino_rosso.build.dfu_on_boot=0
|
|
namino_rosso.build.f_cpu=240000000L
|
|
namino_rosso.build.flash_size=4MB
|
|
namino_rosso.build.flash_freq=80m
|
|
namino_rosso.build.flash_mode=dio
|
|
namino_rosso.build.boot=qio
|
|
namino_rosso.build.partitions=default
|
|
namino_rosso.build.defines=
|
|
namino_rosso.build.loop_core=
|
|
namino_rosso.build.event_core=
|
|
namino_rosso.build.flash_type=qio
|
|
namino_rosso.build.psram_type=qspi
|
|
namino_rosso.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
namino_rosso.menu.LoopCore.1=Core 1
|
|
namino_rosso.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
namino_rosso.menu.LoopCore.0=Core 0
|
|
namino_rosso.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
namino_rosso.menu.EventsCore.1=Core 1
|
|
namino_rosso.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
namino_rosso.menu.EventsCore.0=Core 0
|
|
namino_rosso.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
namino_rosso.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
namino_rosso.menu.USBMode.default.build.usb_mode=0
|
|
namino_rosso.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
namino_rosso.menu.USBMode.hwcdc.build.usb_mode=1
|
|
|
|
namino_rosso.menu.CDCOnBoot.cdc=Enabled
|
|
namino_rosso.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
namino_rosso.menu.CDCOnBoot.default=Disabled
|
|
namino_rosso.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
namino_rosso.menu.MSCOnBoot.default=Disabled
|
|
namino_rosso.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
namino_rosso.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
namino_rosso.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
namino_rosso.menu.DFUOnBoot.default=Disabled
|
|
namino_rosso.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
namino_rosso.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
namino_rosso.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
namino_rosso.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
namino_rosso.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
namino_rosso.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
namino_rosso.menu.UploadMode.default=UART0 / Hardware CDC
|
|
namino_rosso.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
namino_rosso.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
namino_rosso.menu.PSRAM.disabled=Disabled
|
|
namino_rosso.menu.PSRAM.disabled.build.defines=
|
|
namino_rosso.menu.PSRAM.disabled.build.psram_type=qspi
|
|
namino_rosso.menu.PSRAM.enabled=QSPI PSRAM
|
|
namino_rosso.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
namino_rosso.menu.PSRAM.enabled.build.psram_type=qspi
|
|
namino_rosso.menu.PSRAM.opi=OPI PSRAM
|
|
namino_rosso.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
namino_rosso.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
namino_rosso.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
namino_rosso.menu.PartitionScheme.default.build.partitions=default
|
|
namino_rosso.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
namino_rosso.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
namino_rosso.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
namino_rosso.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
namino_rosso.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
namino_rosso.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
namino_rosso.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
namino_rosso.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
namino_rosso.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
namino_rosso.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
namino_rosso.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
namino_rosso.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
namino_rosso.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
namino_rosso.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
namino_rosso.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
namino_rosso.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
namino_rosso.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
namino_rosso.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
namino_rosso.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
namino_rosso.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
namino_rosso.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
namino_rosso.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
namino_rosso.menu.CPUFreq.240=240MHz (WiFi)
|
|
namino_rosso.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
namino_rosso.menu.CPUFreq.160=160MHz (WiFi)
|
|
namino_rosso.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
namino_rosso.menu.CPUFreq.80=80MHz (WiFi)
|
|
namino_rosso.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
namino_rosso.menu.CPUFreq.40=40MHz
|
|
namino_rosso.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
namino_rosso.menu.CPUFreq.20=20MHz
|
|
namino_rosso.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
namino_rosso.menu.CPUFreq.10=10MHz
|
|
namino_rosso.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
namino_rosso.menu.FlashMode.qio=QIO 80MHz
|
|
namino_rosso.menu.FlashMode.qio.build.flash_mode=dio
|
|
namino_rosso.menu.FlashMode.qio.build.boot=qio
|
|
namino_rosso.menu.FlashMode.qio.build.boot_freq=80m
|
|
namino_rosso.menu.FlashMode.qio.build.flash_freq=80m
|
|
namino_rosso.menu.FlashMode.qio120=QIO 120MHz
|
|
namino_rosso.menu.FlashMode.qio120.build.flash_mode=dio
|
|
namino_rosso.menu.FlashMode.qio120.build.boot=qio
|
|
namino_rosso.menu.FlashMode.qio120.build.boot_freq=120m
|
|
namino_rosso.menu.FlashMode.qio120.build.flash_freq=80m
|
|
namino_rosso.menu.FlashMode.dio=DIO 80MHz
|
|
namino_rosso.menu.FlashMode.dio.build.flash_mode=dio
|
|
namino_rosso.menu.FlashMode.dio.build.boot=dio
|
|
namino_rosso.menu.FlashMode.dio.build.boot_freq=80m
|
|
namino_rosso.menu.FlashMode.dio.build.flash_freq=80m
|
|
namino_rosso.menu.FlashMode.opi=OPI 80MHz
|
|
namino_rosso.menu.FlashMode.opi.build.flash_mode=dout
|
|
namino_rosso.menu.FlashMode.opi.build.boot=opi
|
|
namino_rosso.menu.FlashMode.opi.build.boot_freq=80m
|
|
namino_rosso.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
namino_rosso.menu.FlashSize.4M=4MB (32Mb)
|
|
namino_rosso.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
namino_rosso.menu.UploadSpeed.921600=921600
|
|
namino_rosso.menu.UploadSpeed.921600.upload.speed=921600
|
|
namino_rosso.menu.UploadSpeed.115200=115200
|
|
namino_rosso.menu.UploadSpeed.115200.upload.speed=115200
|
|
namino_rosso.menu.UploadSpeed.256000.windows=256000
|
|
namino_rosso.menu.UploadSpeed.256000.upload.speed=256000
|
|
namino_rosso.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
namino_rosso.menu.UploadSpeed.230400=230400
|
|
namino_rosso.menu.UploadSpeed.230400.upload.speed=230400
|
|
namino_rosso.menu.UploadSpeed.460800.linux=460800
|
|
namino_rosso.menu.UploadSpeed.460800.macosx=460800
|
|
namino_rosso.menu.UploadSpeed.460800.upload.speed=460800
|
|
namino_rosso.menu.UploadSpeed.512000.windows=512000
|
|
namino_rosso.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
namino_rosso.menu.DebugLevel.none=None
|
|
namino_rosso.menu.DebugLevel.none.build.code_debug=0
|
|
namino_rosso.menu.DebugLevel.error=Error
|
|
namino_rosso.menu.DebugLevel.error.build.code_debug=1
|
|
namino_rosso.menu.DebugLevel.warn=Warn
|
|
namino_rosso.menu.DebugLevel.warn.build.code_debug=2
|
|
namino_rosso.menu.DebugLevel.info=Info
|
|
namino_rosso.menu.DebugLevel.info.build.code_debug=3
|
|
namino_rosso.menu.DebugLevel.debug=Debug
|
|
namino_rosso.menu.DebugLevel.debug.build.code_debug=4
|
|
namino_rosso.menu.DebugLevel.verbose=Verbose
|
|
namino_rosso.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
namino_rosso.menu.EraseFlash.none=Disabled
|
|
namino_rosso.menu.EraseFlash.none.upload.erase_cmd=
|
|
namino_rosso.menu.EraseFlash.all=Enabled
|
|
namino_rosso.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
# Namino Arancio
|
|
|
|
namino_arancio.name=Namino Arancio
|
|
|
|
namino_arancio.bootloader.tool=esptool_py
|
|
namino_arancio.bootloader.tool.default=esptool_py
|
|
|
|
namino_arancio.upload.tool=esptool_py
|
|
namino_arancio.upload.tool.default=esptool_py
|
|
namino_arancio.upload.tool.network=esp_ota
|
|
|
|
namino_arancio.upload.maximum_size=1310720
|
|
namino_arancio.upload.maximum_data_size=327680
|
|
namino_arancio.upload.flags=
|
|
namino_arancio.upload.extra_flags=
|
|
namino_arancio.upload.use_1200bps_touch=true
|
|
namino_arancio.upload.wait_for_upload_port=true
|
|
|
|
namino_arancio.serial.disableDTR=false
|
|
namino_arancio.serial.disableRTS=false
|
|
|
|
namino_arancio.build.tarch=xtensa
|
|
namino_arancio.build.bootloader_addr=0x0
|
|
namino_arancio.build.target=esp32s3
|
|
namino_arancio.build.mcu=esp32s3
|
|
namino_arancio.build.core=esp32
|
|
namino_arancio.build.variant=namino_arancio
|
|
namino_arancio.build.board=NAMINO_ARANCIO
|
|
|
|
namino_arancio.build.usb_mode=0
|
|
namino_arancio.build.cdc_on_boot=1
|
|
namino_arancio.build.msc_on_boot=0
|
|
namino_arancio.build.dfu_on_boot=0
|
|
namino_arancio.build.f_cpu=240000000L
|
|
namino_arancio.build.flash_size=4MB
|
|
namino_arancio.build.flash_freq=80m
|
|
namino_arancio.build.flash_mode=dio
|
|
namino_arancio.build.boot=qio
|
|
namino_arancio.build.partitions=default
|
|
namino_arancio.build.defines=
|
|
namino_arancio.build.loop_core=
|
|
namino_arancio.build.event_core=
|
|
namino_arancio.build.flash_type=qio
|
|
namino_arancio.build.psram_type=qspi
|
|
namino_arancio.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
namino_arancio.menu.LoopCore.1=Core 1
|
|
namino_arancio.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
namino_arancio.menu.LoopCore.0=Core 0
|
|
namino_arancio.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
namino_arancio.menu.EventsCore.1=Core 1
|
|
namino_arancio.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
namino_arancio.menu.EventsCore.0=Core 0
|
|
namino_arancio.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
namino_arancio.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
namino_arancio.menu.USBMode.default.build.usb_mode=0
|
|
namino_arancio.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
namino_arancio.menu.USBMode.hwcdc.build.usb_mode=1
|
|
|
|
namino_arancio.menu.CDCOnBoot.cdc=Enabled
|
|
namino_arancio.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
namino_arancio.menu.CDCOnBoot.default=Disabled
|
|
namino_arancio.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
namino_arancio.menu.MSCOnBoot.default=Disabled
|
|
namino_arancio.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
namino_arancio.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
namino_arancio.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
namino_arancio.menu.DFUOnBoot.default=Disabled
|
|
namino_arancio.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
namino_arancio.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
namino_arancio.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
namino_arancio.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
namino_arancio.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
namino_arancio.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
namino_arancio.menu.UploadMode.default=UART0 / Hardware CDC
|
|
namino_arancio.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
namino_arancio.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
namino_arancio.menu.PSRAM.disabled=Disabled
|
|
namino_arancio.menu.PSRAM.disabled.build.defines=
|
|
namino_arancio.menu.PSRAM.disabled.build.psram_type=qspi
|
|
namino_arancio.menu.PSRAM.enabled=QSPI PSRAM
|
|
namino_arancio.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
namino_arancio.menu.PSRAM.enabled.build.psram_type=qspi
|
|
namino_arancio.menu.PSRAM.opi=OPI PSRAM
|
|
namino_arancio.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
namino_arancio.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
namino_arancio.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
namino_arancio.menu.PartitionScheme.default.build.partitions=default
|
|
namino_arancio.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
namino_arancio.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
namino_arancio.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
namino_arancio.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
namino_arancio.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
namino_arancio.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
namino_arancio.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
namino_arancio.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
namino_arancio.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
namino_arancio.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
namino_arancio.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
namino_arancio.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
namino_arancio.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
namino_arancio.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
namino_arancio.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
namino_arancio.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
namino_arancio.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
namino_arancio.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
namino_arancio.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
namino_arancio.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
namino_arancio.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
namino_arancio.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
namino_arancio.menu.CPUFreq.240=240MHz (WiFi)
|
|
namino_arancio.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
namino_arancio.menu.CPUFreq.160=160MHz (WiFi)
|
|
namino_arancio.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
namino_arancio.menu.CPUFreq.80=80MHz (WiFi)
|
|
namino_arancio.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
namino_arancio.menu.CPUFreq.40=40MHz
|
|
namino_arancio.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
namino_arancio.menu.CPUFreq.20=20MHz
|
|
namino_arancio.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
namino_arancio.menu.CPUFreq.10=10MHz
|
|
namino_arancio.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
namino_arancio.menu.FlashMode.qio=QIO 80MHz
|
|
namino_arancio.menu.FlashMode.qio.build.flash_mode=dio
|
|
namino_arancio.menu.FlashMode.qio.build.boot=qio
|
|
namino_arancio.menu.FlashMode.qio.build.boot_freq=80m
|
|
namino_arancio.menu.FlashMode.qio.build.flash_freq=80m
|
|
namino_arancio.menu.FlashMode.qio120=QIO 120MHz
|
|
namino_arancio.menu.FlashMode.qio120.build.flash_mode=dio
|
|
namino_arancio.menu.FlashMode.qio120.build.boot=qio
|
|
namino_arancio.menu.FlashMode.qio120.build.boot_freq=120m
|
|
namino_arancio.menu.FlashMode.qio120.build.flash_freq=80m
|
|
namino_arancio.menu.FlashMode.dio=DIO 80MHz
|
|
namino_arancio.menu.FlashMode.dio.build.flash_mode=dio
|
|
namino_arancio.menu.FlashMode.dio.build.boot=dio
|
|
namino_arancio.menu.FlashMode.dio.build.boot_freq=80m
|
|
namino_arancio.menu.FlashMode.dio.build.flash_freq=80m
|
|
namino_arancio.menu.FlashMode.opi=OPI 80MHz
|
|
namino_arancio.menu.FlashMode.opi.build.flash_mode=dout
|
|
namino_arancio.menu.FlashMode.opi.build.boot=opi
|
|
namino_arancio.menu.FlashMode.opi.build.boot_freq=80m
|
|
namino_arancio.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
namino_arancio.menu.FlashSize.4M=4MB (32Mb)
|
|
namino_arancio.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
namino_arancio.menu.UploadSpeed.921600=921600
|
|
namino_arancio.menu.UploadSpeed.921600.upload.speed=921600
|
|
namino_arancio.menu.UploadSpeed.115200=115200
|
|
namino_arancio.menu.UploadSpeed.115200.upload.speed=115200
|
|
namino_arancio.menu.UploadSpeed.256000.windows=256000
|
|
namino_arancio.menu.UploadSpeed.256000.upload.speed=256000
|
|
namino_arancio.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
namino_arancio.menu.UploadSpeed.230400=230400
|
|
namino_arancio.menu.UploadSpeed.230400.upload.speed=230400
|
|
namino_arancio.menu.UploadSpeed.460800.linux=460800
|
|
namino_arancio.menu.UploadSpeed.460800.macosx=460800
|
|
namino_arancio.menu.UploadSpeed.460800.upload.speed=460800
|
|
namino_arancio.menu.UploadSpeed.512000.windows=512000
|
|
namino_arancio.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
namino_arancio.menu.DebugLevel.none=None
|
|
namino_arancio.menu.DebugLevel.none.build.code_debug=0
|
|
namino_arancio.menu.DebugLevel.error=Error
|
|
namino_arancio.menu.DebugLevel.error.build.code_debug=1
|
|
namino_arancio.menu.DebugLevel.warn=Warn
|
|
namino_arancio.menu.DebugLevel.warn.build.code_debug=2
|
|
namino_arancio.menu.DebugLevel.info=Info
|
|
namino_arancio.menu.DebugLevel.info.build.code_debug=3
|
|
namino_arancio.menu.DebugLevel.debug=Debug
|
|
namino_arancio.menu.DebugLevel.debug.build.code_debug=4
|
|
namino_arancio.menu.DebugLevel.verbose=Verbose
|
|
namino_arancio.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
namino_arancio.menu.EraseFlash.none=Disabled
|
|
namino_arancio.menu.EraseFlash.none.upload.erase_cmd=
|
|
namino_arancio.menu.EraseFlash.all=Enabled
|
|
namino_arancio.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
# Namino Bianco
|
|
|
|
namino_bianco.name=Namino Bianco
|
|
|
|
namino_bianco.bootloader.tool=esptool_py
|
|
namino_bianco.bootloader.tool.default=esptool_py
|
|
|
|
namino_bianco.upload.tool=esptool_py
|
|
namino_bianco.upload.tool.default=esptool_py
|
|
namino_bianco.upload.tool.network=esp_ota
|
|
|
|
namino_bianco.upload.maximum_size=1310720
|
|
namino_bianco.upload.maximum_data_size=327680
|
|
namino_bianco.upload.flags=
|
|
namino_bianco.upload.extra_flags=
|
|
namino_bianco.upload.use_1200bps_touch=true
|
|
namino_bianco.upload.wait_for_upload_port=true
|
|
|
|
namino_bianco.serial.disableDTR=false
|
|
namino_bianco.serial.disableRTS=false
|
|
|
|
namino_bianco.build.tarch=xtensa
|
|
namino_bianco.build.bootloader_addr=0x0
|
|
namino_bianco.build.target=esp32s3
|
|
namino_bianco.build.mcu=esp32s3
|
|
namino_bianco.build.core=esp32
|
|
namino_bianco.build.variant=namino_bianco
|
|
namino_bianco.build.board=NAMINO_BIANCO
|
|
|
|
namino_bianco.build.usb_mode=0
|
|
namino_bianco.build.cdc_on_boot=1
|
|
namino_bianco.build.msc_on_boot=0
|
|
namino_bianco.build.dfu_on_boot=0
|
|
namino_bianco.build.f_cpu=240000000L
|
|
namino_bianco.build.flash_size=4MB
|
|
namino_bianco.build.flash_freq=80m
|
|
namino_bianco.build.flash_mode=dio
|
|
namino_bianco.build.boot=qio
|
|
namino_bianco.build.partitions=default
|
|
namino_bianco.build.defines=
|
|
namino_bianco.build.loop_core=
|
|
namino_bianco.build.event_core=
|
|
namino_bianco.build.flash_type=qio
|
|
namino_bianco.build.psram_type=qspi
|
|
namino_bianco.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
namino_bianco.menu.LoopCore.1=Core 1
|
|
namino_bianco.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
namino_bianco.menu.LoopCore.0=Core 0
|
|
namino_bianco.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
namino_bianco.menu.EventsCore.1=Core 1
|
|
namino_bianco.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
namino_bianco.menu.EventsCore.0=Core 0
|
|
namino_bianco.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
namino_bianco.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
namino_bianco.menu.USBMode.default.build.usb_mode=0
|
|
namino_bianco.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
namino_bianco.menu.USBMode.hwcdc.build.usb_mode=1
|
|
|
|
namino_bianco.menu.CDCOnBoot.cdc=Enabled
|
|
namino_bianco.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
namino_bianco.menu.CDCOnBoot.default=Disabled
|
|
namino_bianco.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
namino_bianco.menu.MSCOnBoot.default=Disabled
|
|
namino_bianco.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
namino_bianco.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
namino_bianco.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
namino_bianco.menu.DFUOnBoot.default=Disabled
|
|
namino_bianco.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
namino_bianco.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
namino_bianco.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
namino_bianco.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
namino_bianco.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
namino_bianco.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
namino_bianco.menu.UploadMode.default=UART0 / Hardware CDC
|
|
namino_bianco.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
namino_bianco.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
namino_bianco.menu.PSRAM.disabled=Disabled
|
|
namino_bianco.menu.PSRAM.disabled.build.defines=
|
|
namino_bianco.menu.PSRAM.disabled.build.psram_type=qspi
|
|
namino_bianco.menu.PSRAM.enabled=QSPI PSRAM
|
|
namino_bianco.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
namino_bianco.menu.PSRAM.enabled.build.psram_type=qspi
|
|
namino_bianco.menu.PSRAM.opi=OPI PSRAM
|
|
namino_bianco.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
namino_bianco.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
namino_bianco.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
namino_bianco.menu.PartitionScheme.default.build.partitions=default
|
|
namino_bianco.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
namino_bianco.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
namino_bianco.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
namino_bianco.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
namino_bianco.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
namino_bianco.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
namino_bianco.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
namino_bianco.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
namino_bianco.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
namino_bianco.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
namino_bianco.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
namino_bianco.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
namino_bianco.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
namino_bianco.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
namino_bianco.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
namino_bianco.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
namino_bianco.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
namino_bianco.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
namino_bianco.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
namino_bianco.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
namino_bianco.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
namino_bianco.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
namino_bianco.menu.CPUFreq.240=240MHz (WiFi)
|
|
namino_bianco.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
namino_bianco.menu.CPUFreq.160=160MHz (WiFi)
|
|
namino_bianco.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
namino_bianco.menu.CPUFreq.80=80MHz (WiFi)
|
|
namino_bianco.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
namino_bianco.menu.CPUFreq.40=40MHz
|
|
namino_bianco.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
namino_bianco.menu.CPUFreq.20=20MHz
|
|
namino_bianco.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
namino_bianco.menu.CPUFreq.10=10MHz
|
|
namino_bianco.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
namino_bianco.menu.FlashMode.qio=QIO 80MHz
|
|
namino_bianco.menu.FlashMode.qio.build.flash_mode=dio
|
|
namino_bianco.menu.FlashMode.qio.build.boot=qio
|
|
namino_bianco.menu.FlashMode.qio.build.boot_freq=80m
|
|
namino_bianco.menu.FlashMode.qio.build.flash_freq=80m
|
|
namino_bianco.menu.FlashMode.qio120=QIO 120MHz
|
|
namino_bianco.menu.FlashMode.qio120.build.flash_mode=dio
|
|
namino_bianco.menu.FlashMode.qio120.build.boot=qio
|
|
namino_bianco.menu.FlashMode.qio120.build.boot_freq=120m
|
|
namino_bianco.menu.FlashMode.qio120.build.flash_freq=80m
|
|
namino_bianco.menu.FlashMode.dio=DIO 80MHz
|
|
namino_bianco.menu.FlashMode.dio.build.flash_mode=dio
|
|
namino_bianco.menu.FlashMode.dio.build.boot=dio
|
|
namino_bianco.menu.FlashMode.dio.build.boot_freq=80m
|
|
namino_bianco.menu.FlashMode.dio.build.flash_freq=80m
|
|
namino_bianco.menu.FlashMode.opi=OPI 80MHz
|
|
namino_bianco.menu.FlashMode.opi.build.flash_mode=dout
|
|
namino_bianco.menu.FlashMode.opi.build.boot=opi
|
|
namino_bianco.menu.FlashMode.opi.build.boot_freq=80m
|
|
namino_bianco.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
namino_bianco.menu.FlashSize.4M=4MB (32Mb)
|
|
namino_bianco.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
namino_bianco.menu.UploadSpeed.921600=921600
|
|
namino_bianco.menu.UploadSpeed.921600.upload.speed=921600
|
|
namino_bianco.menu.UploadSpeed.115200=115200
|
|
namino_bianco.menu.UploadSpeed.115200.upload.speed=115200
|
|
namino_bianco.menu.UploadSpeed.256000.windows=256000
|
|
namino_bianco.menu.UploadSpeed.256000.upload.speed=256000
|
|
namino_bianco.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
namino_bianco.menu.UploadSpeed.230400=230400
|
|
namino_bianco.menu.UploadSpeed.230400.upload.speed=230400
|
|
namino_bianco.menu.UploadSpeed.460800.linux=460800
|
|
namino_bianco.menu.UploadSpeed.460800.macosx=460800
|
|
namino_bianco.menu.UploadSpeed.460800.upload.speed=460800
|
|
namino_bianco.menu.UploadSpeed.512000.windows=512000
|
|
namino_bianco.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
namino_bianco.menu.DebugLevel.none=None
|
|
namino_bianco.menu.DebugLevel.none.build.code_debug=0
|
|
namino_bianco.menu.DebugLevel.error=Error
|
|
namino_bianco.menu.DebugLevel.error.build.code_debug=1
|
|
namino_bianco.menu.DebugLevel.warn=Warn
|
|
namino_bianco.menu.DebugLevel.warn.build.code_debug=2
|
|
namino_bianco.menu.DebugLevel.info=Info
|
|
namino_bianco.menu.DebugLevel.info.build.code_debug=3
|
|
namino_bianco.menu.DebugLevel.debug=Debug
|
|
namino_bianco.menu.DebugLevel.debug.build.code_debug=4
|
|
namino_bianco.menu.DebugLevel.verbose=Verbose
|
|
namino_bianco.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
namino_bianco.menu.EraseFlash.none=Disabled
|
|
namino_bianco.menu.EraseFlash.none.upload.erase_cmd=
|
|
namino_bianco.menu.EraseFlash.all=Enabled
|
|
namino_bianco.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
ioxesp32.name=IOXESP32
|
|
|
|
ioxesp32.bootloader.tool=esptool_py
|
|
ioxesp32.bootloader.tool.default=esptool_py
|
|
|
|
ioxesp32.upload.tool=esptool_py
|
|
ioxesp32.upload.tool.default=esptool_py
|
|
ioxesp32.upload.tool.network=esp_ota
|
|
|
|
ioxesp32.upload.maximum_size=1310720
|
|
ioxesp32.upload.maximum_data_size=327680
|
|
ioxesp32.upload.flags=
|
|
ioxesp32.upload.extra_flags=
|
|
|
|
ioxesp32.serial.disableDTR=true
|
|
ioxesp32.serial.disableRTS=true
|
|
|
|
ioxesp32.build.tarch=xtensa
|
|
ioxesp32.build.bootloader_addr=0x1000
|
|
ioxesp32.build.target=esp32
|
|
ioxesp32.build.mcu=esp32
|
|
ioxesp32.build.core=esp32
|
|
ioxesp32.build.variant=ioxesp32
|
|
ioxesp32.build.board=IOXESP32
|
|
|
|
ioxesp32.build.f_cpu=240000000L
|
|
ioxesp32.build.flash_mode=dio
|
|
ioxesp32.build.flash_size=4MB
|
|
ioxesp32ps.build.flash_freq=40m
|
|
ioxesp32.build.boot=dio
|
|
ioxesp32.build.partitions=default
|
|
ioxesp32.build.defines=
|
|
ioxesp32.build.extra_libs=
|
|
|
|
ioxesp32.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
ioxesp32.menu.PartitionScheme.default.build.partitions=default
|
|
ioxesp32.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
ioxesp32.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
ioxesp32.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
ioxesp32.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
ioxesp32.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
ioxesp32.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
ioxesp32.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
ioxesp32.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
ioxesp32.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
ioxesp32.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
ioxesp32.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
ioxesp32.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
ioxesp32.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
ioxesp32.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
ioxesp32.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
ioxesp32.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
ioxesp32.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
ioxesp32.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
ioxesp32.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
ioxesp32.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
ioxesp32.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
ioxesp32.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
ioxesp32.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
ioxesp32.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
ioxesp32.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
ioxesp32.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
ioxesp32.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
ioxesp32.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
ioxesp32.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
ioxesp32.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
ioxesp32.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
ioxesp32.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
ioxesp32.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
ioxesp32.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
|
|
ioxesp32.menu.FlashFreq.80=80MHz
|
|
ioxesp32.menu.FlashFreq.80.build.flash_freq=80m
|
|
ioxesp32.menu.FlashFreq.40=40MHz
|
|
ioxesp32.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
ioxesp32.menu.UploadSpeed.921600=921600
|
|
ioxesp32.menu.UploadSpeed.921600.upload.speed=921600
|
|
ioxesp32.menu.UploadSpeed.115200=115200
|
|
ioxesp32.menu.UploadSpeed.115200.upload.speed=115200
|
|
ioxesp32.menu.UploadSpeed.256000.windows=256000
|
|
ioxesp32.menu.UploadSpeed.256000.upload.speed=256000
|
|
ioxesp32.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
ioxesp32.menu.UploadSpeed.230400=230400
|
|
ioxesp32.menu.UploadSpeed.230400.upload.speed=230400
|
|
ioxesp32.menu.UploadSpeed.460800.linux=460800
|
|
ioxesp32.menu.UploadSpeed.460800.macosx=460800
|
|
ioxesp32.menu.UploadSpeed.460800.upload.speed=460800
|
|
ioxesp32.menu.UploadSpeed.512000.windows=512000
|
|
ioxesp32.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
ioxesp32.menu.DebugLevel.none=None
|
|
ioxesp32.menu.DebugLevel.none.build.code_debug=0
|
|
ioxesp32.menu.DebugLevel.error=Error
|
|
ioxesp32.menu.DebugLevel.error.build.code_debug=1
|
|
ioxesp32.menu.DebugLevel.warn=Warn
|
|
ioxesp32.menu.DebugLevel.warn.build.code_debug=2
|
|
ioxesp32.menu.DebugLevel.info=Info
|
|
ioxesp32.menu.DebugLevel.info.build.code_debug=3
|
|
ioxesp32.menu.DebugLevel.debug=Debug
|
|
ioxesp32.menu.DebugLevel.debug.build.code_debug=4
|
|
ioxesp32.menu.DebugLevel.verbose=Verbose
|
|
ioxesp32.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
ioxesp32.menu.EraseFlash.none=Disabled
|
|
ioxesp32.menu.EraseFlash.none.upload.erase_cmd=
|
|
ioxesp32.menu.EraseFlash.all=Enabled
|
|
ioxesp32.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
ioxesp32ps.name=IOXESP32PS
|
|
|
|
ioxesp32ps.bootloader.tool=esptool_py
|
|
ioxesp32ps.bootloader.tool.default=esptool_py
|
|
|
|
ioxesp32ps.upload.tool=esptool_py
|
|
ioxesp32ps.upload.tool.default=esptool_py
|
|
ioxesp32ps.upload.tool.network=esp_ota
|
|
|
|
ioxesp32ps.upload.maximum_size=1310720
|
|
ioxesp32ps.upload.maximum_data_size=327680
|
|
ioxesp32ps.upload.flags=
|
|
ioxesp32ps.upload.extra_flags=
|
|
|
|
ioxesp32ps.serial.disableDTR=true
|
|
ioxesp32ps.serial.disableRTS=true
|
|
|
|
ioxesp32ps.build.tarch=xtensa
|
|
ioxesp32ps.build.bootloader_addr=0x1000
|
|
ioxesp32ps.build.target=esp32
|
|
ioxesp32ps.build.mcu=esp32
|
|
ioxesp32ps.build.core=esp32
|
|
ioxesp32ps.build.variant=ioxesp32
|
|
ioxesp32ps.build.board=IOXESP32PS
|
|
|
|
ioxesp32ps.build.f_cpu=240000000L
|
|
ioxesp32ps.build.flash_mode=dio
|
|
ioxesp32ps.build.flash_size=4MB
|
|
ioxesp32ps.build.flash_freq=40m
|
|
ioxesp32ps.build.boot=dio
|
|
ioxesp32ps.build.partitions=default
|
|
ioxesp32ps.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue -mfix-esp32-psram-cache-strategy=memw
|
|
ioxesp32ps.build.extra_libs=
|
|
|
|
ioxesp32ps.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
ioxesp32ps.menu.PartitionScheme.default.build.partitions=default
|
|
ioxesp32ps.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
ioxesp32ps.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
ioxesp32ps.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
ioxesp32ps.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
ioxesp32ps.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
ioxesp32ps.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
ioxesp32ps.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
ioxesp32ps.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
ioxesp32ps.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
ioxesp32ps.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
ioxesp32ps.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
ioxesp32ps.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
ioxesp32ps.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
ioxesp32ps.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
ioxesp32ps.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
ioxesp32ps.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
ioxesp32ps.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
ioxesp32ps.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
ioxesp32ps.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
ioxesp32ps.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
ioxesp32ps.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
ioxesp32ps.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
ioxesp32ps.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
ioxesp32ps.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
ioxesp32ps.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
ioxesp32ps.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
ioxesp32ps.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
ioxesp32ps.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
ioxesp32ps.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
ioxesp32ps.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
ioxesp32ps.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
ioxesp32ps.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
ioxesp32ps.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
ioxesp32ps.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
|
|
ioxesp32ps.menu.FlashFreq.80=80MHz
|
|
ioxesp32ps.menu.FlashFreq.80.build.flash_freq=80m
|
|
ioxesp32ps.menu.FlashFreq.40=40MHz
|
|
ioxesp32ps.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
ioxesp32ps.menu.UploadSpeed.921600=921600
|
|
ioxesp32ps.menu.UploadSpeed.921600.upload.speed=921600
|
|
ioxesp32ps.menu.UploadSpeed.115200=115200
|
|
ioxesp32ps.menu.UploadSpeed.115200.upload.speed=115200
|
|
ioxesp32ps.menu.UploadSpeed.256000.windows=256000
|
|
ioxesp32ps.menu.UploadSpeed.256000.upload.speed=256000
|
|
ioxesp32ps.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
ioxesp32ps.menu.UploadSpeed.230400=230400
|
|
ioxesp32ps.menu.UploadSpeed.230400.upload.speed=230400
|
|
ioxesp32ps.menu.UploadSpeed.460800.linux=460800
|
|
ioxesp32ps.menu.UploadSpeed.460800.macosx=460800
|
|
ioxesp32ps.menu.UploadSpeed.460800.upload.speed=460800
|
|
ioxesp32ps.menu.UploadSpeed.512000.windows=512000
|
|
ioxesp32ps.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
ioxesp32ps.menu.DebugLevel.none=None
|
|
ioxesp32ps.menu.DebugLevel.none.build.code_debug=0
|
|
ioxesp32ps.menu.DebugLevel.error=Error
|
|
ioxesp32ps.menu.DebugLevel.error.build.code_debug=1
|
|
ioxesp32ps.menu.DebugLevel.warn=Warn
|
|
ioxesp32ps.menu.DebugLevel.warn.build.code_debug=2
|
|
ioxesp32ps.menu.DebugLevel.info=Info
|
|
ioxesp32ps.menu.DebugLevel.info.build.code_debug=3
|
|
ioxesp32ps.menu.DebugLevel.debug=Debug
|
|
ioxesp32ps.menu.DebugLevel.debug.build.code_debug=4
|
|
ioxesp32ps.menu.DebugLevel.verbose=Verbose
|
|
ioxesp32ps.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
ioxesp32ps.menu.EraseFlash.none=Disabled
|
|
ioxesp32ps.menu.EraseFlash.none.upload.erase_cmd=
|
|
ioxesp32ps.menu.EraseFlash.all=Enabled
|
|
ioxesp32ps.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
atd147_s3.name=ATD1.47-S3
|
|
|
|
atd147_s3.bootloader.tool=esptool_py
|
|
atd147_s3.bootloader.tool.default=esptool_py
|
|
|
|
atd147_s3.upload.tool=esptool_py
|
|
atd147_s3.upload.tool.default=esptool_py
|
|
atd147_s3.upload.tool.network=esp_ota
|
|
|
|
atd147_s3.upload.maximum_size=1310720
|
|
atd147_s3.upload.maximum_data_size=327680
|
|
atd147_s3.upload.flags=
|
|
atd147_s3.upload.extra_flags=
|
|
atd147_s3.upload.use_1200bps_touch=false
|
|
atd147_s3.upload.wait_for_upload_port=false
|
|
|
|
atd147_s3.serial.disableDTR=false
|
|
atd147_s3.serial.disableRTS=false
|
|
|
|
atd147_s3.build.tarch=xtensa
|
|
atd147_s3.build.bootloader_addr=0x0
|
|
atd147_s3.build.target=esp32s3
|
|
atd147_s3.build.mcu=esp32s3
|
|
atd147_s3.build.core=esp32
|
|
atd147_s3.build.variant=atd147_s3
|
|
atd147_s3.build.board=ATD143_S3
|
|
|
|
atd147_s3.build.usb_mode=1
|
|
atd147_s3.build.cdc_on_boot=0
|
|
atd147_s3.build.msc_on_boot=0
|
|
atd147_s3.build.dfu_on_boot=0
|
|
atd147_s3.build.f_cpu=240000000L
|
|
atd147_s3.build.flash_size=8MB
|
|
atd147_s3.build.flash_freq=80m
|
|
atd147_s3.build.flash_mode=dio
|
|
atd147_s3.build.boot=qio
|
|
atd147_s3.build.boot_freq=80m
|
|
atd147_s3.build.partitions=default_8MB
|
|
atd147_s3.build.defines=
|
|
atd147_s3.build.loop_core=
|
|
atd147_s3.build.event_core=
|
|
atd147_s3.build.psram_type=opi
|
|
atd147_s3.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
atd147_s3.menu.JTAGAdapter.default=Disabled
|
|
atd147_s3.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
atd147_s3.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
atd147_s3.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
atd147_s3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
atd147_s3.menu.JTAGAdapter.external=FTDI Adapter
|
|
atd147_s3.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
atd147_s3.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
atd147_s3.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
atd147_s3.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
atd147_s3.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
atd147_s3.menu.PSRAM.disabled=Disabled
|
|
atd147_s3.menu.PSRAM.disabled.build.defines=
|
|
atd147_s3.menu.PSRAM.disabled.build.psram_type=opi
|
|
atd147_s3.menu.PSRAM.enabled=Enable
|
|
atd147_s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
atd147_s3.menu.PSRAM.enabled.build.psram_type=opi
|
|
|
|
atd147_s3.menu.LoopCore.1=Core 1
|
|
atd147_s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
atd147_s3.menu.LoopCore.0=Core 0
|
|
atd147_s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
atd147_s3.menu.EventsCore.1=Core 1
|
|
atd147_s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
atd147_s3.menu.EventsCore.0=Core 0
|
|
atd147_s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
atd147_s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
atd147_s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
atd147_s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
atd147_s3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
atd147_s3.menu.CDCOnBoot.default=Disabled
|
|
atd147_s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
atd147_s3.menu.CDCOnBoot.cdc=Enabled
|
|
atd147_s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
atd147_s3.menu.MSCOnBoot.default=Disabled
|
|
atd147_s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
atd147_s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
atd147_s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
atd147_s3.menu.DFUOnBoot.default=Disabled
|
|
atd147_s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
atd147_s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
atd147_s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
atd147_s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
atd147_s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
atd147_s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
atd147_s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
atd147_s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
atd147_s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
atd147_s3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
atd147_s3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
atd147_s3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
atd147_s3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
atd147_s3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
atd147_s3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
atd147_s3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
atd147_s3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
atd147_s3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
atd147_s3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
atd147_s3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
atd147_s3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
atd147_s3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
atd147_s3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
atd147_s3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
atd147_s3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
atd147_s3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
atd147_s3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
atd147_s3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
atd147_s3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
atd147_s3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
atd147_s3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
atd147_s3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
atd147_s3.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
atd147_s3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
atd147_s3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
atd147_s3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
atd147_s3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
atd147_s3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
atd147_s3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
atd147_s3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
atd147_s3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
atd147_s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
atd147_s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
atd147_s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
atd147_s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
atd147_s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
atd147_s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
atd147_s3.menu.CPUFreq.40=40MHz
|
|
atd147_s3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
atd147_s3.menu.CPUFreq.20=20MHz
|
|
atd147_s3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
atd147_s3.menu.CPUFreq.10=10MHz
|
|
atd147_s3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
atd147_s3.menu.UploadSpeed.921600=921600
|
|
atd147_s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
atd147_s3.menu.UploadSpeed.115200=115200
|
|
atd147_s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
atd147_s3.menu.UploadSpeed.256000.windows=256000
|
|
atd147_s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
atd147_s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
atd147_s3.menu.UploadSpeed.230400=230400
|
|
atd147_s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
atd147_s3.menu.UploadSpeed.460800.linux=460800
|
|
atd147_s3.menu.UploadSpeed.460800.macosx=460800
|
|
atd147_s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
atd147_s3.menu.UploadSpeed.512000.windows=512000
|
|
atd147_s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
atd147_s3.menu.DebugLevel.none=None
|
|
atd147_s3.menu.DebugLevel.none.build.code_debug=0
|
|
atd147_s3.menu.DebugLevel.error=Error
|
|
atd147_s3.menu.DebugLevel.error.build.code_debug=1
|
|
atd147_s3.menu.DebugLevel.warn=Warn
|
|
atd147_s3.menu.DebugLevel.warn.build.code_debug=2
|
|
atd147_s3.menu.DebugLevel.info=Info
|
|
atd147_s3.menu.DebugLevel.info.build.code_debug=3
|
|
atd147_s3.menu.DebugLevel.debug=Debug
|
|
atd147_s3.menu.DebugLevel.debug.build.code_debug=4
|
|
atd147_s3.menu.DebugLevel.verbose=Verbose
|
|
atd147_s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
atd147_s3.menu.EraseFlash.none=Disabled
|
|
atd147_s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
atd147_s3.menu.EraseFlash.all=Enabled
|
|
atd147_s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
# ESP32-S3 PowerFeather
|
|
|
|
esp32s3_powerfeather.name=ESP32-S3 PowerFeather
|
|
esp32s3_powerfeather.vid.0=0x303a
|
|
esp32s3_powerfeather.pid.0=0x81BB
|
|
|
|
esp32s3_powerfeather.bootloader.tool=esptool_py
|
|
esp32s3_powerfeather.bootloader.tool.default=esptool_py
|
|
|
|
esp32s3_powerfeather.upload.tool=esptool_py
|
|
esp32s3_powerfeather.upload.tool.default=esptool_py
|
|
esp32s3_powerfeather.upload.tool.network=esp_ota
|
|
|
|
esp32s3_powerfeather.upload.maximum_size=1310720
|
|
esp32s3_powerfeather.upload.maximum_data_size=327680
|
|
esp32s3_powerfeather.upload.flags=
|
|
esp32s3_powerfeather.upload.extra_flags=
|
|
esp32s3_powerfeather.upload.use_1200bps_touch=false
|
|
esp32s3_powerfeather.upload.wait_for_upload_port=false
|
|
|
|
esp32s3_powerfeather.serial.disableDTR=false
|
|
esp32s3_powerfeather.serial.disableRTS=false
|
|
|
|
esp32s3_powerfeather.build.tarch=xtensa
|
|
esp32s3_powerfeather.build.bootloader_addr=0x0
|
|
esp32s3_powerfeather.build.target=esp32s3
|
|
esp32s3_powerfeather.build.mcu=esp32s3
|
|
esp32s3_powerfeather.build.core=esp32
|
|
esp32s3_powerfeather.build.variant=esp32s3_powerfeather
|
|
esp32s3_powerfeather.build.board=ESP32S3_POWERFEATHER
|
|
|
|
esp32s3_powerfeather.build.usb_mode=1
|
|
esp32s3_powerfeather.build.cdc_on_boot=1
|
|
esp32s3_powerfeather.build.msc_on_boot=0
|
|
esp32s3_powerfeather.build.dfu_on_boot=0
|
|
esp32s3_powerfeather.build.f_cpu=240000000L
|
|
esp32s3_powerfeather.build.flash_size=8MB
|
|
esp32s3_powerfeather.build.flash_freq=80m
|
|
esp32s3_powerfeather.build.flash_mode=dio
|
|
esp32s3_powerfeather.build.boot=qio
|
|
esp32s3_powerfeather.build.boot_freq=80m
|
|
esp32s3_powerfeather.build.partitions=default_8MB
|
|
esp32s3_powerfeather.build.defines=
|
|
esp32s3_powerfeather.build.loop_core=
|
|
esp32s3_powerfeather.build.event_core=
|
|
esp32s3_powerfeather.build.flash_type=qio
|
|
esp32s3_powerfeather.build.psram_type=qspi
|
|
esp32s3_powerfeather.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
esp32s3_powerfeather.menu.PSRAM.disabled=Disabled
|
|
esp32s3_powerfeather.menu.PSRAM.disabled.build.defines=
|
|
esp32s3_powerfeather.menu.PSRAM.disabled.build.psram_type=qspi
|
|
esp32s3_powerfeather.menu.PSRAM.enabled=QSPI PSRAM
|
|
esp32s3_powerfeather.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
esp32s3_powerfeather.menu.PSRAM.enabled.build.psram_type=qspi
|
|
|
|
esp32s3_powerfeather.menu.FlashMode.qio=QIO 80MHz
|
|
esp32s3_powerfeather.menu.FlashMode.qio.build.flash_mode=dio
|
|
esp32s3_powerfeather.menu.FlashMode.qio.build.boot=qio
|
|
esp32s3_powerfeather.menu.FlashMode.qio.build.boot_freq=80m
|
|
esp32s3_powerfeather.menu.FlashMode.qio.build.flash_freq=80m
|
|
esp32s3_powerfeather.menu.FlashMode.qio120=QIO 120MHz
|
|
esp32s3_powerfeather.menu.FlashMode.qio120.build.flash_mode=dio
|
|
esp32s3_powerfeather.menu.FlashMode.qio120.build.boot=qio
|
|
esp32s3_powerfeather.menu.FlashMode.qio120.build.boot_freq=120m
|
|
esp32s3_powerfeather.menu.FlashMode.qio120.build.flash_freq=80m
|
|
esp32s3_powerfeather.menu.FlashMode.dio=DIO 80MHz
|
|
esp32s3_powerfeather.menu.FlashMode.dio.build.flash_mode=dio
|
|
esp32s3_powerfeather.menu.FlashMode.dio.build.boot=dio
|
|
esp32s3_powerfeather.menu.FlashMode.dio.build.boot_freq=80m
|
|
esp32s3_powerfeather.menu.FlashMode.dio.build.flash_freq=80m
|
|
|
|
esp32s3_powerfeather.menu.LoopCore.1=Core 1
|
|
esp32s3_powerfeather.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
esp32s3_powerfeather.menu.LoopCore.0=Core 0
|
|
esp32s3_powerfeather.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
esp32s3_powerfeather.menu.EventsCore.1=Core 1
|
|
esp32s3_powerfeather.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
esp32s3_powerfeather.menu.EventsCore.0=Core 0
|
|
esp32s3_powerfeather.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
esp32s3_powerfeather.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
esp32s3_powerfeather.menu.USBMode.hwcdc.build.usb_mode=1
|
|
esp32s3_powerfeather.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
esp32s3_powerfeather.menu.USBMode.default.build.usb_mode=0
|
|
|
|
esp32s3_powerfeather.menu.CDCOnBoot.cdc=Enabled
|
|
esp32s3_powerfeather.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
esp32s3_powerfeather.menu.CDCOnBoot.default=Disabled
|
|
esp32s3_powerfeather.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
esp32s3_powerfeather.menu.MSCOnBoot.default=Disabled
|
|
esp32s3_powerfeather.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
esp32s3_powerfeather.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
esp32s3_powerfeather.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
esp32s3_powerfeather.menu.DFUOnBoot.default=Disabled
|
|
esp32s3_powerfeather.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
esp32s3_powerfeather.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
esp32s3_powerfeather.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
esp32s3_powerfeather.menu.UploadMode.default=UART0 / Hardware CDC
|
|
esp32s3_powerfeather.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
esp32s3_powerfeather.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
esp32s3_powerfeather.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
esp32s3_powerfeather.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
esp32s3_powerfeather.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
esp32s3_powerfeather.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
esp32s3_powerfeather.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
esp32s3_powerfeather.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
esp32s3_powerfeather.menu.PartitionScheme.default_ffat_8MB=8M with ffat (3MB APP/1.5MB FATFS)
|
|
esp32s3_powerfeather.menu.PartitionScheme.default_ffat_8MB.build.partitions=default_ffat_8MB
|
|
esp32s3_powerfeather.menu.PartitionScheme.default_ffat_8MB.upload.maximum_size=3342336
|
|
esp32s3_powerfeather.menu.PartitionScheme.large_spiffs_8MB=Large SPIFFS (1.2MB APP/5.3MB SPIFFS)
|
|
esp32s3_powerfeather.menu.PartitionScheme.large_spiffs_8MB.build.partitions=large_spiffs_8MB
|
|
esp32s3_powerfeather.menu.PartitionScheme.large_spiffs_8MB.upload.maximum_size=1310720
|
|
esp32s3_powerfeather.menu.PartitionScheme.large_ffat_8MB=Large FFAT (1.2MB APP/5.3MB FATFS)
|
|
esp32s3_powerfeather.menu.PartitionScheme.large_ffat_8MB.build.partitions=large_ffat_8MB
|
|
esp32s3_powerfeather.menu.PartitionScheme.large_ffat_8MB.upload.maximum_size=1310720
|
|
esp32s3_powerfeather.menu.PartitionScheme.max_app_8MB=Maximum APP (7.9MB APP No OTA/No FS)
|
|
esp32s3_powerfeather.menu.PartitionScheme.max_app_8MB.build.partitions=max_app_8MB
|
|
esp32s3_powerfeather.menu.PartitionScheme.max_app_8MB.upload.maximum_size=8257536
|
|
|
|
esp32s3_powerfeather.menu.CPUFreq.240=240MHz (WiFi)
|
|
esp32s3_powerfeather.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
esp32s3_powerfeather.menu.CPUFreq.160=160MHz (WiFi)
|
|
esp32s3_powerfeather.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
esp32s3_powerfeather.menu.CPUFreq.80=80MHz (WiFi)
|
|
esp32s3_powerfeather.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
esp32s3_powerfeather.menu.CPUFreq.40=40MHz
|
|
esp32s3_powerfeather.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
esp32s3_powerfeather.menu.CPUFreq.20=20MHz
|
|
esp32s3_powerfeather.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
esp32s3_powerfeather.menu.CPUFreq.10=10MHz
|
|
esp32s3_powerfeather.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
esp32s3_powerfeather.menu.UploadSpeed.921600=921600
|
|
esp32s3_powerfeather.menu.UploadSpeed.921600.upload.speed=921600
|
|
esp32s3_powerfeather.menu.UploadSpeed.115200=115200
|
|
esp32s3_powerfeather.menu.UploadSpeed.115200.upload.speed=115200
|
|
esp32s3_powerfeather.menu.UploadSpeed.256000.windows=256000
|
|
esp32s3_powerfeather.menu.UploadSpeed.256000.upload.speed=256000
|
|
esp32s3_powerfeather.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
esp32s3_powerfeather.menu.UploadSpeed.230400=230400
|
|
esp32s3_powerfeather.menu.UploadSpeed.230400.upload.speed=230400
|
|
esp32s3_powerfeather.menu.UploadSpeed.460800.linux=460800
|
|
esp32s3_powerfeather.menu.UploadSpeed.460800.macosx=460800
|
|
esp32s3_powerfeather.menu.UploadSpeed.460800.upload.speed=460800
|
|
esp32s3_powerfeather.menu.UploadSpeed.512000.windows=512000
|
|
esp32s3_powerfeather.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
esp32s3_powerfeather.menu.DebugLevel.none=None
|
|
esp32s3_powerfeather.menu.DebugLevel.none.build.code_debug=0
|
|
esp32s3_powerfeather.menu.DebugLevel.error=Error
|
|
esp32s3_powerfeather.menu.DebugLevel.error.build.code_debug=1
|
|
esp32s3_powerfeather.menu.DebugLevel.warn=Warn
|
|
esp32s3_powerfeather.menu.DebugLevel.warn.build.code_debug=2
|
|
esp32s3_powerfeather.menu.DebugLevel.info=Info
|
|
esp32s3_powerfeather.menu.DebugLevel.info.build.code_debug=3
|
|
esp32s3_powerfeather.menu.DebugLevel.debug=Debug
|
|
esp32s3_powerfeather.menu.DebugLevel.debug.build.code_debug=4
|
|
esp32s3_powerfeather.menu.DebugLevel.verbose=Verbose
|
|
esp32s3_powerfeather.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
esp32s3_powerfeather.menu.EraseFlash.none=Disabled
|
|
esp32s3_powerfeather.menu.EraseFlash.none.upload.erase_cmd=
|
|
esp32s3_powerfeather.menu.EraseFlash.all=Enabled
|
|
esp32s3_powerfeather.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
# senseBox MCU ESP32-S2
|
|
|
|
sensebox_mcu_esp32s2.name=senseBox MCU-S2 ESP32-S2
|
|
sensebox_mcu_esp32s2.vid.0=0x303A
|
|
sensebox_mcu_esp32s2.pid.0=0x81B8
|
|
sensebox_mcu_esp32s2.vid.1=0x303A
|
|
sensebox_mcu_esp32s2.pid.1=0x81B9
|
|
sensebox_mcu_esp32s2.vid.2=0x303A
|
|
sensebox_mcu_esp32s2.pid.2=0x81BA
|
|
|
|
sensebox_mcu_esp32s2.bootloader.tool=esptool_py
|
|
sensebox_mcu_esp32s2.bootloader.tool.default=esptool_py
|
|
|
|
sensebox_mcu_esp32s2.upload.tool=esptool_py
|
|
sensebox_mcu_esp32s2.upload.tool.default=esptool_py
|
|
sensebox_mcu_esp32s2.upload.tool.network=esp_ota
|
|
|
|
sensebox_mcu_esp32s2.upload.maximum_size=1310720
|
|
sensebox_mcu_esp32s2.upload.maximum_data_size=327680
|
|
sensebox_mcu_esp32s2.upload.flags=
|
|
sensebox_mcu_esp32s2.upload.extra_flags=
|
|
sensebox_mcu_esp32s2.upload.use_1200bps_touch=true
|
|
sensebox_mcu_esp32s2.upload.wait_for_upload_port=true
|
|
|
|
sensebox_mcu_esp32s2.serial.disableDTR=false
|
|
sensebox_mcu_esp32s2.serial.disableRTS=false
|
|
|
|
sensebox_mcu_esp32s2.build.tarch=xtensa
|
|
sensebox_mcu_esp32s2.build.bootloader_addr=0x1000
|
|
sensebox_mcu_esp32s2.build.target=esp32s2
|
|
sensebox_mcu_esp32s2.build.mcu=esp32s2
|
|
sensebox_mcu_esp32s2.build.core=esp32
|
|
sensebox_mcu_esp32s2.build.variant=sensebox_mcu_esp32s2
|
|
sensebox_mcu_esp32s2.build.board=SENSEBOX_MCU_ESP32S2
|
|
|
|
sensebox_mcu_esp32s2.build.cdc_on_boot=1
|
|
sensebox_mcu_esp32s2.build.msc_on_boot=1
|
|
sensebox_mcu_esp32s2.build.dfu_on_boot=0
|
|
sensebox_mcu_esp32s2.build.f_cpu=240000000L
|
|
sensebox_mcu_esp32s2.build.flash_size=4MB
|
|
sensebox_mcu_esp32s2.build.flash_freq=80m
|
|
sensebox_mcu_esp32s2.build.flash_mode=dio
|
|
sensebox_mcu_esp32s2.build.boot=qio
|
|
sensebox_mcu_esp32s2.build.partitions=default
|
|
sensebox_mcu_esp32s2.build.defines=
|
|
|
|
sensebox_mcu_esp32s2.menu.CDCOnBoot.cdc=Enabled
|
|
sensebox_mcu_esp32s2.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
sensebox_mcu_esp32s2.menu.CDCOnBoot.default=Disabled
|
|
sensebox_mcu_esp32s2.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
sensebox_mcu_esp32s2.menu.MSCOnBoot.msc=Enabled
|
|
sensebox_mcu_esp32s2.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
sensebox_mcu_esp32s2.menu.MSCOnBoot.default=Disabled
|
|
sensebox_mcu_esp32s2.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
|
|
sensebox_mcu_esp32s2.menu.DFUOnBoot.default=Disabled
|
|
sensebox_mcu_esp32s2.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
sensebox_mcu_esp32s2.menu.DFUOnBoot.dfu=Enabled
|
|
sensebox_mcu_esp32s2.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
sensebox_mcu_esp32s2.menu.UploadMode.cdc=Internal USB
|
|
sensebox_mcu_esp32s2.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
sensebox_mcu_esp32s2.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
sensebox_mcu_esp32s2.menu.UploadMode.default=UART0
|
|
sensebox_mcu_esp32s2.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
sensebox_mcu_esp32s2.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
sensebox_mcu_esp32s2.menu.PSRAM.enabled=Enabled
|
|
sensebox_mcu_esp32s2.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
sensebox_mcu_esp32s2.menu.PSRAM.disabled=Disabled
|
|
sensebox_mcu_esp32s2.menu.PSRAM.disabled.build.defines=
|
|
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.tinyuf2=TinyUF2 4MB (1.3MB APP/960KB FATFS)
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader-tinyuf2
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.tinyuf2.build.custom_partitions=partitions-4MB-tinyuf2
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.tinyuf2.upload.maximum_size=1441792
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x2d0000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.default.build.partitions=default
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
sensebox_mcu_esp32s2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
sensebox_mcu_esp32s2.menu.CPUFreq.240=240MHz (WiFi)
|
|
sensebox_mcu_esp32s2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
sensebox_mcu_esp32s2.menu.CPUFreq.160=160MHz (WiFi)
|
|
sensebox_mcu_esp32s2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
sensebox_mcu_esp32s2.menu.CPUFreq.80=80MHz (WiFi)
|
|
sensebox_mcu_esp32s2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
sensebox_mcu_esp32s2.menu.CPUFreq.40=40MHz
|
|
sensebox_mcu_esp32s2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
sensebox_mcu_esp32s2.menu.CPUFreq.20=20MHz
|
|
sensebox_mcu_esp32s2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
sensebox_mcu_esp32s2.menu.CPUFreq.10=10MHz
|
|
sensebox_mcu_esp32s2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
sensebox_mcu_esp32s2.menu.FlashMode.qio=QIO
|
|
sensebox_mcu_esp32s2.menu.FlashMode.qio.build.flash_mode=dio
|
|
sensebox_mcu_esp32s2.menu.FlashMode.qio.build.boot=qio
|
|
sensebox_mcu_esp32s2.menu.FlashMode.dio=DIO
|
|
sensebox_mcu_esp32s2.menu.FlashMode.dio.build.flash_mode=dio
|
|
sensebox_mcu_esp32s2.menu.FlashMode.dio.build.boot=dio
|
|
sensebox_mcu_esp32s2.menu.FlashMode.qout=QOUT
|
|
sensebox_mcu_esp32s2.menu.FlashMode.qout.build.flash_mode=dout
|
|
sensebox_mcu_esp32s2.menu.FlashMode.qout.build.boot=qout
|
|
sensebox_mcu_esp32s2.menu.FlashMode.dout=DOUT
|
|
sensebox_mcu_esp32s2.menu.FlashMode.dout.build.flash_mode=dout
|
|
sensebox_mcu_esp32s2.menu.FlashMode.dout.build.boot=dout
|
|
|
|
sensebox_mcu_esp32s2.menu.FlashFreq.80=80MHz
|
|
sensebox_mcu_esp32s2.menu.FlashFreq.80.build.flash_freq=80m
|
|
sensebox_mcu_esp32s2.menu.FlashFreq.40=40MHz
|
|
sensebox_mcu_esp32s2.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
sensebox_mcu_esp32s2.menu.FlashSize.4M=4MB (32Mb)
|
|
sensebox_mcu_esp32s2.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
sensebox_mcu_esp32s2.menu.UploadSpeed.921600=921600
|
|
sensebox_mcu_esp32s2.menu.UploadSpeed.921600.upload.speed=921600
|
|
sensebox_mcu_esp32s2.menu.UploadSpeed.115200=115200
|
|
sensebox_mcu_esp32s2.menu.UploadSpeed.115200.upload.speed=115200
|
|
sensebox_mcu_esp32s2.menu.UploadSpeed.256000.windows=256000
|
|
sensebox_mcu_esp32s2.menu.UploadSpeed.256000.upload.speed=256000
|
|
sensebox_mcu_esp32s2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
sensebox_mcu_esp32s2.menu.UploadSpeed.230400=230400
|
|
sensebox_mcu_esp32s2.menu.UploadSpeed.230400.upload.speed=230400
|
|
sensebox_mcu_esp32s2.menu.UploadSpeed.460800.linux=460800
|
|
sensebox_mcu_esp32s2.menu.UploadSpeed.460800.macosx=460800
|
|
sensebox_mcu_esp32s2.menu.UploadSpeed.460800.upload.speed=460800
|
|
sensebox_mcu_esp32s2.menu.UploadSpeed.512000.windows=512000
|
|
sensebox_mcu_esp32s2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
sensebox_mcu_esp32s2.menu.DebugLevel.none=None
|
|
sensebox_mcu_esp32s2.menu.DebugLevel.none.build.code_debug=0
|
|
sensebox_mcu_esp32s2.menu.DebugLevel.error=Error
|
|
sensebox_mcu_esp32s2.menu.DebugLevel.error.build.code_debug=1
|
|
sensebox_mcu_esp32s2.menu.DebugLevel.warn=Warn
|
|
sensebox_mcu_esp32s2.menu.DebugLevel.warn.build.code_debug=2
|
|
sensebox_mcu_esp32s2.menu.DebugLevel.info=Info
|
|
sensebox_mcu_esp32s2.menu.DebugLevel.info.build.code_debug=3
|
|
sensebox_mcu_esp32s2.menu.DebugLevel.debug=Debug
|
|
sensebox_mcu_esp32s2.menu.DebugLevel.debug.build.code_debug=4
|
|
sensebox_mcu_esp32s2.menu.DebugLevel.verbose=Verbose
|
|
sensebox_mcu_esp32s2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
sensebox_mcu_esp32s2.menu.EraseFlash.none=Disabled
|
|
sensebox_mcu_esp32s2.menu.EraseFlash.none.upload.erase_cmd=
|
|
sensebox_mcu_esp32s2.menu.EraseFlash.all=Enabled
|
|
sensebox_mcu_esp32s2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
nano_nora.name=Arduino Nano ESP32
|
|
nano_nora.vid.0=0x2341
|
|
nano_nora.pid.0=0x0070
|
|
nano_nora.upload_port.0.vid=0x2341
|
|
nano_nora.upload_port.0.pid=0x0070
|
|
|
|
nano_nora.bootloader.tool=esptool_py
|
|
nano_nora.bootloader.tool.default=esptool_py
|
|
|
|
nano_nora.upload.tool=dfu-util
|
|
nano_nora.upload.tool.default=dfu-util
|
|
nano_nora.upload.tool.network=esp_ota
|
|
nano_nora.upload.protocol=serial
|
|
nano_nora.upload.maximum_size=3145728
|
|
nano_nora.upload.maximum_data_size=327680
|
|
nano_nora.upload.use_1200bps_touch=false
|
|
nano_nora.upload.wait_for_upload_port=false
|
|
|
|
nano_nora.serial.disableDTR=false
|
|
nano_nora.serial.disableRTS=false
|
|
|
|
nano_nora.build.tarch=xtensa
|
|
nano_nora.build.bootloader_addr=0x0
|
|
nano_nora.build.target=esp32s3
|
|
nano_nora.build.mcu=esp32s3
|
|
nano_nora.build.core=esp32
|
|
nano_nora.build.variant=arduino_nano_nora
|
|
nano_nora.build.board=NANO_ESP32
|
|
nano_nora.build.code_debug=0
|
|
|
|
nano_nora.build.usb_mode=0
|
|
nano_nora.build.cdc_on_boot=1
|
|
nano_nora.build.msc_on_boot=0
|
|
nano_nora.build.dfu_on_boot=1
|
|
nano_nora.build.f_cpu=240000000L
|
|
nano_nora.build.flash_size=16MB
|
|
nano_nora.build.flash_freq=80m
|
|
nano_nora.build.flash_mode=dio
|
|
nano_nora.build.boot=qio
|
|
nano_nora.build.boot_freq=80m
|
|
nano_nora.build.partitions=app3M_fat9M_fact512k_16MB
|
|
nano_nora.build.defines=-DBOARD_HAS_PIN_REMAP {build.disable_pin_remap} -DBOARD_HAS_PSRAM '-DUSB_MANUFACTURER="Arduino"' '-DUSB_PRODUCT="Nano ESP32"'
|
|
nano_nora.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
nano_nora.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
nano_nora.build.psram_type=opi
|
|
nano_nora.build.memory_type={build.boot}_{build.psram_type}
|
|
nano_nora.build.disable_pin_remap=
|
|
|
|
nano_nora.debug_config.nano_nora.cortex-debug.custom.name=Arduino on Nano ESP32
|
|
nano_nora.debug_config.nano_nora.cortex-debug.custom.overrideAttachCommands.0=set remote hardware-watchpoint-limit 2
|
|
nano_nora.debug_config.nano_nora.cortex-debug.custom.overrideAttachCommands.1=monitor reset halt
|
|
nano_nora.debug_config.nano_nora.cortex-debug.custom.overrideAttachCommands.2=monitor gdb_sync
|
|
nano_nora.debug_config.nano_nora.cortex-debug.custom.overrideAttachCommands.3=interrupt
|
|
nano_nora.debug_config.nano_nora.cortex-debug.custom.overrideRestartCommands.0=monitor reset halt
|
|
nano_nora.debug_config.nano_nora.cortex-debug.custom.overrideRestartCommands.1=monitor gdb_sync
|
|
nano_nora.debug_config.nano_nora.cortex-debug.custom.overrideRestartCommands.2=interrupt
|
|
nano_nora.debug.additional_config=debug_config.nano_nora
|
|
|
|
nano_nora.tools.esptool_py.program.pattern_args=--chip {build.mcu} --port "{serial.port}" --before default_reset --after hard_reset write_flash -z --flash_mode {build.flash_mode} --flash_freq {build.flash_freq} --flash_size {build.flash_size} {build.bootloader_addr} "{build.path}/{build.project_name}.bootloader.bin" 0x8000 "{build.path}/{build.project_name}.partitions.bin" 0xe000 "{runtime.platform.path}/tools/partitions/boot_app0.bin" 0xf70000 "{build.variant.path}/extra/nora_recovery/nora_recovery.ino.bin" 0x10000 "{build.path}/{build.project_name}.bin"
|
|
nano_nora.tools.esptool_py.erase.pattern_args=--chip {build.mcu} --port "{serial.port}" --before default_reset --after hard_reset erase_flash
|
|
|
|
nano_nora.debug.executable=
|
|
|
|
nano_nora.menu.PartitionScheme.default=With FAT partition (default)
|
|
nano_nora.menu.PartitionScheme.spiffs=With SPIFFS partition (advanced)
|
|
nano_nora.menu.PartitionScheme.spiffs.build.partitions=app3M_spiffs9M_fact512k_16MB
|
|
|
|
nano_nora.menu.PinNumbers.default=By Arduino pin (default)
|
|
nano_nora.menu.PinNumbers.byGPIONumber=By GPIO number (legacy)
|
|
nano_nora.menu.PinNumbers.byGPIONumber.build.disable_pin_remap=-DBOARD_USES_HW_GPIO_NUMBERS
|
|
|
|
nano_nora.menu.USBMode.default=Normal mode (TinyUSB)
|
|
nano_nora.menu.USBMode.hwcdc=Debug mode (Hardware CDC)
|
|
nano_nora.menu.USBMode.hwcdc.build.usb_mode=1
|
|
nano_nora.menu.USBMode.hwcdc.debug.executable={build.path}/{build.project_name}.elf
|
|
|
|
##############################################################
|
|
|
|
makergo_c3_supermini.name=MakerGO ESP32 C3 SuperMini
|
|
|
|
makergo_c3_supermini.bootloader.tool=esptool_py
|
|
makergo_c3_supermini.bootloader.tool.default=esptool_py
|
|
|
|
makergo_c3_supermini.upload.tool=esptool_py
|
|
makergo_c3_supermini.upload.tool.default=esptool_py
|
|
makergo_c3_supermini.upload.tool.network=esp_ota
|
|
|
|
makergo_c3_supermini.upload.maximum_size=1310720
|
|
makergo_c3_supermini.upload.maximum_data_size=327680
|
|
makergo_c3_supermini.upload.flags=
|
|
makergo_c3_supermini.upload.extra_flags=
|
|
makergo_c3_supermini.upload.use_1200bps_touch=false
|
|
makergo_c3_supermini.upload.wait_for_upload_port=false
|
|
|
|
makergo_c3_supermini.serial.disableDTR=true
|
|
makergo_c3_supermini.serial.disableRTS=true
|
|
|
|
makergo_c3_supermini.build.tarch=riscv32
|
|
makergo_c3_supermini.build.target=esp
|
|
makergo_c3_supermini.build.mcu=esp32c3
|
|
makergo_c3_supermini.build.core=esp32
|
|
makergo_c3_supermini.build.variant=makergo_c3_supermini
|
|
makergo_c3_supermini.build.board=MAKERGO_C3_SUPERMINI
|
|
makergo_c3_supermini.build.bootloader_addr=0x0
|
|
|
|
makergo_c3_supermini.build.cdc_on_boot=1
|
|
makergo_c3_supermini.build.f_cpu=160000000L
|
|
makergo_c3_supermini.build.flash_size=4MB
|
|
makergo_c3_supermini.build.flash_freq=80m
|
|
makergo_c3_supermini.build.flash_mode=dio
|
|
makergo_c3_supermini.build.boot=qio
|
|
makergo_c3_supermini.build.partitions=default
|
|
makergo_c3_supermini.build.defines=
|
|
|
|
makergo_c3_supermini.menu.CDCOnBoot.default=Enabled
|
|
makergo_c3_supermini.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
makergo_c3_supermini.menu.CDCOnBoot.dis_cdc=Disabled
|
|
makergo_c3_supermini.menu.CDCOnBoot.dis_cdc.build.cdc_on_boot=0
|
|
|
|
makergo_c3_supermini.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
makergo_c3_supermini.menu.PartitionScheme.default.build.partitions=default
|
|
makergo_c3_supermini.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
makergo_c3_supermini.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
makergo_c3_supermini.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
makergo_c3_supermini.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
makergo_c3_supermini.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
makergo_c3_supermini.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
makergo_c3_supermini.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
makergo_c3_supermini.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
makergo_c3_supermini.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
makergo_c3_supermini.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
makergo_c3_supermini.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
makergo_c3_supermini.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
makergo_c3_supermini.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
makergo_c3_supermini.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
makergo_c3_supermini.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
makergo_c3_supermini.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
makergo_c3_supermini.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
|
|
|
|
makergo_c3_supermini.menu.CPUFreq.160=160MHz (WiFi)
|
|
makergo_c3_supermini.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
makergo_c3_supermini.menu.CPUFreq.80=80MHz (WiFi)
|
|
makergo_c3_supermini.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
makergo_c3_supermini.menu.CPUFreq.40=40MHz
|
|
makergo_c3_supermini.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
makergo_c3_supermini.menu.CPUFreq.20=20MHz
|
|
makergo_c3_supermini.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
makergo_c3_supermini.menu.CPUFreq.10=10MHz
|
|
makergo_c3_supermini.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
|
|
makergo_c3_supermini.menu.FlashFreq.80=80MHz
|
|
makergo_c3_supermini.menu.FlashFreq.80.build.flash_freq=80m
|
|
makergo_c3_supermini.menu.FlashFreq.40=40MHz
|
|
makergo_c3_supermini.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
makergo_c3_supermini.menu.UploadSpeed.921600=921600
|
|
makergo_c3_supermini.menu.UploadSpeed.921600.upload.speed=921600
|
|
makergo_c3_supermini.menu.UploadSpeed.115200=115200
|
|
makergo_c3_supermini.menu.UploadSpeed.115200.upload.speed=115200
|
|
makergo_c3_supermini.menu.UploadSpeed.256000.windows=256000
|
|
makergo_c3_supermini.menu.UploadSpeed.256000.upload.speed=256000
|
|
makergo_c3_supermini.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
makergo_c3_supermini.menu.UploadSpeed.230400=230400
|
|
makergo_c3_supermini.menu.UploadSpeed.230400.upload.speed=230400
|
|
makergo_c3_supermini.menu.UploadSpeed.460800.linux=460800
|
|
makergo_c3_supermini.menu.UploadSpeed.460800.macosx=460800
|
|
makergo_c3_supermini.menu.UploadSpeed.460800.upload.speed=460800
|
|
makergo_c3_supermini.menu.UploadSpeed.512000.windows=512000
|
|
makergo_c3_supermini.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
makergo_c3_supermini.menu.DebugLevel.none=None
|
|
makergo_c3_supermini.menu.DebugLevel.none.build.code_debug=0
|
|
makergo_c3_supermini.menu.DebugLevel.error=Error
|
|
makergo_c3_supermini.menu.DebugLevel.error.build.code_debug=1
|
|
makergo_c3_supermini.menu.DebugLevel.warn=Warn
|
|
makergo_c3_supermini.menu.DebugLevel.warn.build.code_debug=2
|
|
makergo_c3_supermini.menu.DebugLevel.info=Info
|
|
makergo_c3_supermini.menu.DebugLevel.info.build.code_debug=3
|
|
makergo_c3_supermini.menu.DebugLevel.debug=Debug
|
|
makergo_c3_supermini.menu.DebugLevel.debug.build.code_debug=4
|
|
makergo_c3_supermini.menu.DebugLevel.verbose=Verbose
|
|
makergo_c3_supermini.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
makergo_c3_supermini.menu.EraseFlash.none=Disabled
|
|
makergo_c3_supermini.menu.EraseFlash.none.upload.erase_cmd=
|
|
makergo_c3_supermini.menu.EraseFlash.all=Enabled
|
|
makergo_c3_supermini.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
# ThingPulse ePulse Feather
|
|
|
|
epulse_feather.name=ThingPulse ePulse Feather
|
|
|
|
epulse_feather.bootloader.tool=esptool_py
|
|
epulse_feather.bootloader.tool.default=esptool_py
|
|
|
|
epulse_feather.upload.tool=esptool_py
|
|
epulse_feather.upload.tool.default=esptool_py
|
|
epulse_feather.upload.tool.network=esp_ota
|
|
|
|
epulse_feather.upload.maximum_size=1310720
|
|
epulse_feather.upload.maximum_data_size=327680
|
|
epulse_feather.upload.flags=
|
|
epulse_feather.upload.extra_flags=
|
|
|
|
epulse_feather.serial.disableDTR=true
|
|
epulse_feather.serial.disableRTS=true
|
|
|
|
epulse_feather.build.tarch=xtensa
|
|
epulse_feather.build.bootloader_addr=0x1000
|
|
epulse_feather.build.target=esp32
|
|
epulse_feather.build.mcu=esp32
|
|
epulse_feather.build.core=esp32
|
|
epulse_feather.build.variant=thingpulse_epulse_feather
|
|
epulse_feather.build.board=THINGPULSE_EPULSE_FEATHER
|
|
|
|
epulse_feather.build.f_cpu=240000000L
|
|
epulse_feather.build.flash_size=8MB
|
|
epulse_feather.build.flash_freq=80m
|
|
epulse_feather.build.flash_mode=dio
|
|
epulse_feather.build.boot=dio
|
|
epulse_feather.build.partitions=default_8MB
|
|
epulse_feather.build.defines=
|
|
epulse_feather.build.loop_core=
|
|
epulse_feather.build.event_core=
|
|
|
|
epulse_feather.menu.PSRAM.enabled=Enabled
|
|
epulse_feather.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
epulse_feather.menu.PSRAM.disabled=Disabled
|
|
epulse_feather.menu.PSRAM.disabled.build.defines=
|
|
|
|
epulse_feather.menu.LoopCore.1=Core 1
|
|
epulse_feather.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
epulse_feather.menu.LoopCore.0=Core 0
|
|
epulse_feather.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
epulse_feather.menu.EventsCore.1=Core 1
|
|
epulse_feather.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
epulse_feather.menu.EventsCore.0=Core 0
|
|
epulse_feather.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
epulse_feather.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
epulse_feather.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
epulse_feather.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
epulse_feather.menu.PartitionScheme.max_app_8MB=Maximum APP (7.9MB APP No OTA/No FS)
|
|
epulse_feather.menu.PartitionScheme.max_app_8MB.build.partitions=max_app_8MB
|
|
epulse_feather.menu.PartitionScheme.max_app_8MB.upload.maximum_size=8257536
|
|
|
|
epulse_feather.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
epulse_feather.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
epulse_feather.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
epulse_feather.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
epulse_feather.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
epulse_feather.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
epulse_feather.menu.CPUFreq.40=40MHz
|
|
epulse_feather.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
epulse_feather.menu.CPUFreq.20=20MHz
|
|
epulse_feather.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
epulse_feather.menu.CPUFreq.10=10MHz
|
|
epulse_feather.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
epulse_feather.menu.FlashFreq.80=80MHz
|
|
epulse_feather.menu.FlashFreq.80.build.flash_freq=80m
|
|
epulse_feather.menu.FlashFreq.40=40MHz
|
|
epulse_feather.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
epulse_feather.menu.UploadSpeed.921600=921600
|
|
epulse_feather.menu.UploadSpeed.921600.upload.speed=921600
|
|
epulse_feather.menu.UploadSpeed.115200=115200
|
|
epulse_feather.menu.UploadSpeed.115200.upload.speed=115200
|
|
epulse_feather.menu.UploadSpeed.256000.windows=256000
|
|
epulse_feather.menu.UploadSpeed.256000.upload.speed=256000
|
|
epulse_feather.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
epulse_feather.menu.UploadSpeed.230400=230400
|
|
epulse_feather.menu.UploadSpeed.230400.upload.speed=230400
|
|
epulse_feather.menu.UploadSpeed.460800.linux=460800
|
|
epulse_feather.menu.UploadSpeed.460800.macosx=460800
|
|
epulse_feather.menu.UploadSpeed.460800.upload.speed=460800
|
|
epulse_feather.menu.UploadSpeed.512000.windows=512000
|
|
epulse_feather.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
epulse_feather.menu.DebugLevel.none=None
|
|
epulse_feather.menu.DebugLevel.none.build.code_debug=0
|
|
epulse_feather.menu.DebugLevel.error=Error
|
|
epulse_feather.menu.DebugLevel.error.build.code_debug=1
|
|
epulse_feather.menu.DebugLevel.warn=Warn
|
|
epulse_feather.menu.DebugLevel.warn.build.code_debug=2
|
|
epulse_feather.menu.DebugLevel.info=Info
|
|
epulse_feather.menu.DebugLevel.info.build.code_debug=3
|
|
epulse_feather.menu.DebugLevel.debug=Debug
|
|
epulse_feather.menu.DebugLevel.debug.build.code_debug=4
|
|
epulse_feather.menu.DebugLevel.verbose=Verbose
|
|
epulse_feather.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
epulse_feather.menu.EraseFlash.none=Disabled
|
|
epulse_feather.menu.EraseFlash.none.upload.erase_cmd=
|
|
epulse_feather.menu.EraseFlash.all=Enabled
|
|
epulse_feather.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
# ThingPulse ePulse Feather C6
|
|
|
|
epulse_feather_c6.name=ThingPulse ePulse Feather C6
|
|
|
|
epulse_feather_c6.bootloader.tool=esptool_py
|
|
epulse_feather_c6.bootloader.tool.default=esptool_py
|
|
|
|
epulse_feather_c6.upload.tool=esptool_py
|
|
epulse_feather_c6.upload.tool.default=esptool_py
|
|
epulse_feather_c6.upload.tool.network=esp_ota
|
|
|
|
epulse_feather_c6.upload.maximum_size=1310720
|
|
epulse_feather_c6.upload.maximum_data_size=327680
|
|
epulse_feather_c6.upload.flags=
|
|
epulse_feather_c6.upload.extra_flags=
|
|
epulse_feather_c6.upload.use_1200bps_touch=false
|
|
epulse_feather_c6.upload.wait_for_upload_port=false
|
|
|
|
epulse_feather_c6.serial.disableDTR=false
|
|
epulse_feather_c6.serial.disableRTS=false
|
|
|
|
epulse_feather_c6.build.tarch=riscv32
|
|
epulse_feather_c6.build.target=esp
|
|
epulse_feather_c6.build.mcu=esp32c6
|
|
epulse_feather_c6.build.core=esp32
|
|
epulse_feather_c6.build.variant=thingpulse_epulse_feather_c6
|
|
epulse_feather_c6.build.board=THINGPULSE_EPULSE_FEATHER_C6
|
|
epulse_feather_c6.build.bootloader_addr=0x0
|
|
|
|
epulse_feather_c6.build.cdc_on_boot=0
|
|
epulse_feather_c6.build.f_cpu=160000000L
|
|
epulse_feather_c6.build.flash_size=4MB
|
|
epulse_feather_c6.build.flash_freq=80m
|
|
epulse_feather_c6.build.flash_mode=qio
|
|
epulse_feather_c6.build.boot=qio
|
|
epulse_feather_c6.build.partitions=default
|
|
epulse_feather_c6.build.defines=
|
|
|
|
epulse_feather_c6.menu.JTAGAdapter.default=Disabled
|
|
epulse_feather_c6.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
epulse_feather_c6.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
epulse_feather_c6.menu.JTAGAdapter.builtin.build.openocdscript=esp32c6-builtin.cfg
|
|
epulse_feather_c6.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
epulse_feather_c6.menu.JTAGAdapter.external=FTDI Adapter
|
|
epulse_feather_c6.menu.JTAGAdapter.external.build.openocdscript=esp32c6-ftdi.cfg
|
|
epulse_feather_c6.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
epulse_feather_c6.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
epulse_feather_c6.menu.JTAGAdapter.bridge.build.openocdscript=esp32c6-bridge.cfg
|
|
epulse_feather_c6.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
epulse_feather_c6.menu.CDCOnBoot.default=Disabled
|
|
epulse_feather_c6.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
epulse_feather_c6.menu.CDCOnBoot.cdc=Enabled
|
|
epulse_feather_c6.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
epulse_feather_c6.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
epulse_feather_c6.menu.PartitionScheme.default.build.partitions=default
|
|
epulse_feather_c6.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
epulse_feather_c6.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
epulse_feather_c6.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
epulse_feather_c6.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
epulse_feather_c6.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
epulse_feather_c6.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
epulse_feather_c6.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
epulse_feather_c6.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
epulse_feather_c6.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
epulse_feather_c6.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
epulse_feather_c6.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
epulse_feather_c6.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
epulse_feather_c6.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
epulse_feather_c6.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
epulse_feather_c6.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
epulse_feather_c6.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
epulse_feather_c6.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
epulse_feather_c6.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
epulse_feather_c6.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
epulse_feather_c6.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
epulse_feather_c6.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
epulse_feather_c6.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
epulse_feather_c6.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
epulse_feather_c6.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
epulse_feather_c6.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
epulse_feather_c6.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
epulse_feather_c6.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
epulse_feather_c6.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
epulse_feather_c6.menu.PartitionScheme.zigbee=Zigbee 4MB with spiffs
|
|
epulse_feather_c6.menu.PartitionScheme.zigbee.build.partitions=zigbee
|
|
epulse_feather_c6.menu.PartitionScheme.zigbee.upload.maximum_size=1310720
|
|
epulse_feather_c6.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
epulse_feather_c6.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
epulse_feather_c6.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
epulse_feather_c6.menu.PartitionScheme.custom=Custom
|
|
epulse_feather_c6.menu.PartitionScheme.custom.build.partitions=
|
|
epulse_feather_c6.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
epulse_feather_c6.menu.CPUFreq.160=160MHz (WiFi)
|
|
epulse_feather_c6.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
epulse_feather_c6.menu.CPUFreq.120=120MHz (WiFi)
|
|
epulse_feather_c6.menu.CPUFreq.120.build.f_cpu=120000000L
|
|
epulse_feather_c6.menu.CPUFreq.80=80MHz (WiFi)
|
|
epulse_feather_c6.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
epulse_feather_c6.menu.CPUFreq.40=40MHz
|
|
epulse_feather_c6.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
epulse_feather_c6.menu.CPUFreq.20=20MHz
|
|
epulse_feather_c6.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
epulse_feather_c6.menu.CPUFreq.10=10MHz
|
|
epulse_feather_c6.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
epulse_feather_c6.menu.FlashMode.qio=QIO
|
|
epulse_feather_c6.menu.FlashMode.qio.build.flash_mode=dio
|
|
epulse_feather_c6.menu.FlashMode.qio.build.boot=qio
|
|
epulse_feather_c6.menu.FlashMode.dio=DIO
|
|
epulse_feather_c6.menu.FlashMode.dio.build.flash_mode=dio
|
|
epulse_feather_c6.menu.FlashMode.dio.build.boot=dio
|
|
|
|
epulse_feather_c6.menu.FlashFreq.80=80MHz
|
|
epulse_feather_c6.menu.FlashFreq.80.build.flash_freq=80m
|
|
epulse_feather_c6.menu.FlashFreq.40=40MHz
|
|
epulse_feather_c6.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
epulse_feather_c6.menu.FlashSize.4M=4MB (32Mb)
|
|
epulse_feather_c6.menu.FlashSize.4M.build.flash_size=4MB
|
|
epulse_feather_c6.menu.FlashSize.2M=2MB (16Mb)
|
|
epulse_feather_c6.menu.FlashSize.2M.build.flash_size=2MB
|
|
epulse_feather_c6.menu.FlashSize.2M.build.partitions=minimal
|
|
|
|
epulse_feather_c6.menu.UploadSpeed.921600=921600
|
|
epulse_feather_c6.menu.UploadSpeed.921600.upload.speed=921600
|
|
epulse_feather_c6.menu.UploadSpeed.115200=115200
|
|
epulse_feather_c6.menu.UploadSpeed.115200.upload.speed=115200
|
|
epulse_feather_c6.menu.UploadSpeed.256000.windows=256000
|
|
epulse_feather_c6.menu.UploadSpeed.256000.upload.speed=256000
|
|
epulse_feather_c6.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
epulse_feather_c6.menu.UploadSpeed.230400=230400
|
|
epulse_feather_c6.menu.UploadSpeed.230400.upload.speed=230400
|
|
epulse_feather_c6.menu.UploadSpeed.460800.linux=460800
|
|
epulse_feather_c6.menu.UploadSpeed.460800.macosx=460800
|
|
epulse_feather_c6.menu.UploadSpeed.460800.upload.speed=460800
|
|
epulse_feather_c6.menu.UploadSpeed.512000.windows=512000
|
|
epulse_feather_c6.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
epulse_feather_c6.menu.DebugLevel.none=None
|
|
epulse_feather_c6.menu.DebugLevel.none.build.code_debug=0
|
|
epulse_feather_c6.menu.DebugLevel.error=Error
|
|
epulse_feather_c6.menu.DebugLevel.error.build.code_debug=1
|
|
epulse_feather_c6.menu.DebugLevel.warn=Warn
|
|
epulse_feather_c6.menu.DebugLevel.warn.build.code_debug=2
|
|
epulse_feather_c6.menu.DebugLevel.info=Info
|
|
epulse_feather_c6.menu.DebugLevel.info.build.code_debug=3
|
|
epulse_feather_c6.menu.DebugLevel.debug=Debug
|
|
epulse_feather_c6.menu.DebugLevel.debug.build.code_debug=4
|
|
epulse_feather_c6.menu.DebugLevel.verbose=Verbose
|
|
epulse_feather_c6.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
epulse_feather_c6.menu.EraseFlash.none=Disabled
|
|
epulse_feather_c6.menu.EraseFlash.none.upload.erase_cmd=
|
|
epulse_feather_c6.menu.EraseFlash.all=Enabled
|
|
epulse_feather_c6.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
epulse_feather_c6.menu.ZigbeeMode.default=Disabled
|
|
epulse_feather_c6.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
epulse_feather_c6.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
epulse_feather_c6.menu.ZigbeeMode.ed=Zigbee ED (end device)
|
|
epulse_feather_c6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
|
|
epulse_feather_c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
|
|
epulse_feather_c6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
epulse_feather_c6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
epulse_feather_c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
epulse_feather_c6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
|
|
epulse_feather_c6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
|
|
epulse_feather_c6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
|
|
|
|
##############################################################
|
|
|
|
Geekble_ESP32C3.name=Geekble Mini ESP32-C3
|
|
|
|
Geekble_ESP32C3.bootloader.tool=esptool_py
|
|
Geekble_ESP32C3.bootloader.tool.default=esptool_py
|
|
|
|
Geekble_ESP32C3.upload.tool=esptool_py
|
|
Geekble_ESP32C3.upload.tool.default=esptool_py
|
|
Geekble_ESP32C3.upload.tool.network=esp_ota
|
|
|
|
Geekble_ESP32C3.upload.maximum_size=1310720
|
|
Geekble_ESP32C3.upload.maximum_data_size=327680
|
|
Geekble_ESP32C3.upload.flags=
|
|
Geekble_ESP32C3.upload.extra_flags=
|
|
Geekble_ESP32C3.upload.use_1200bps_touch=false
|
|
Geekble_ESP32C3.upload.wait_for_upload_port=false
|
|
|
|
Geekble_ESP32C3.serial.disableDTR=true
|
|
Geekble_ESP32C3.serial.disableRTS=true
|
|
|
|
Geekble_ESP32C3.build.tarch=riscv32
|
|
Geekble_ESP32C3.build.target=esp
|
|
Geekble_ESP32C3.build.mcu=esp32c3
|
|
Geekble_ESP32C3.build.core=esp32
|
|
Geekble_ESP32C3.build.variant=Geekble_ESP32C3
|
|
Geekble_ESP32C3.build.board=GEEKBLE_ESP32C3
|
|
Geekble_ESP32C3.build.bootloader_addr=0x0
|
|
|
|
Geekble_ESP32C3.build.cdc_on_boot=1
|
|
Geekble_ESP32C3.build.f_cpu=160000000L
|
|
Geekble_ESP32C3.build.flash_size=4MB
|
|
Geekble_ESP32C3.build.flash_freq=80m
|
|
Geekble_ESP32C3.build.flash_mode=dio
|
|
Geekble_ESP32C3.build.boot=qio
|
|
Geekble_ESP32C3.build.partitions=default
|
|
Geekble_ESP32C3.build.defines=
|
|
|
|
Geekble_ESP32C3.menu.CDCOnBoot.default=Enabled
|
|
Geekble_ESP32C3.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
Geekble_ESP32C3.menu.CDCOnBoot.cdc=Disabled
|
|
Geekble_ESP32C3.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
|
|
|
|
Geekble_ESP32C3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
Geekble_ESP32C3.menu.PartitionScheme.default.build.partitions=default
|
|
Geekble_ESP32C3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
Geekble_ESP32C3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
Geekble_ESP32C3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
Geekble_ESP32C3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
Geekble_ESP32C3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
Geekble_ESP32C3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
Geekble_ESP32C3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
Geekble_ESP32C3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
Geekble_ESP32C3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
Geekble_ESP32C3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
Geekble_ESP32C3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
Geekble_ESP32C3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
Geekble_ESP32C3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
Geekble_ESP32C3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
Geekble_ESP32C3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
Geekble_ESP32C3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
Geekble_ESP32C3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
|
|
Geekble_ESP32C3.menu.CPUFreq.160=160MHz (WiFi) (Default)
|
|
Geekble_ESP32C3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
Geekble_ESP32C3.menu.CPUFreq.80=80MHz (WiFi)
|
|
Geekble_ESP32C3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
Geekble_ESP32C3.menu.CPUFreq.40=40MHz
|
|
Geekble_ESP32C3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
Geekble_ESP32C3.menu.CPUFreq.20=20MHz
|
|
Geekble_ESP32C3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
Geekble_ESP32C3.menu.CPUFreq.10=10MHz
|
|
Geekble_ESP32C3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
Geekble_ESP32C3.menu.FlashMode.qio=QIO (Default)
|
|
Geekble_ESP32C3.menu.FlashMode.qio.build.flash_mode=dio
|
|
Geekble_ESP32C3.menu.FlashMode.qio.build.boot=qio
|
|
Geekble_ESP32C3.menu.FlashMode.dio=DIO
|
|
Geekble_ESP32C3.menu.FlashMode.dio.build.flash_mode=dio
|
|
Geekble_ESP32C3.menu.FlashMode.dio.build.boot=dio
|
|
Geekble_ESP32C3.menu.FlashMode.qout=QOUT
|
|
Geekble_ESP32C3.menu.FlashMode.qout.build.flash_mode=dout
|
|
Geekble_ESP32C3.menu.FlashMode.qout.build.boot=qout
|
|
Geekble_ESP32C3.menu.FlashMode.dout=DOUT
|
|
Geekble_ESP32C3.menu.FlashMode.dout.build.flash_mode=dout
|
|
|
|
Geekble_ESP32C3.menu.FlashFreq.80=80MHz (Default)
|
|
Geekble_ESP32C3.menu.FlashFreq.80.build.flash_freq=80m
|
|
Geekble_ESP32C3.menu.FlashFreq.40=40MHz
|
|
Geekble_ESP32C3.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
Geekble_ESP32C3.menu.FlashSize.4M=4MB (Default)
|
|
Geekble_ESP32C3.menu.FlashSize.4M.build.flash_size=4MB
|
|
Geekble_ESP32C3.menu.FlashSize.2M=2MB
|
|
Geekble_ESP32C3.menu.FlashSize.2M.build.flash_size=2MB
|
|
Geekble_ESP32C3.menu.FlashSize.2M.build.partitions=minimal
|
|
|
|
Geekble_ESP32C3.menu.UploadSpeed.921600=921600 (Default)
|
|
Geekble_ESP32C3.menu.UploadSpeed.921600.upload.speed=921600
|
|
Geekble_ESP32C3.menu.UploadSpeed.115200=115200
|
|
Geekble_ESP32C3.menu.UploadSpeed.115200.upload.speed=115200
|
|
Geekble_ESP32C3.menu.UploadSpeed.256000.windows=256000
|
|
Geekble_ESP32C3.menu.UploadSpeed.256000.upload.speed=256000
|
|
Geekble_ESP32C3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
Geekble_ESP32C3.menu.UploadSpeed.230400=230400
|
|
Geekble_ESP32C3.menu.UploadSpeed.230400.upload.speed=230400
|
|
Geekble_ESP32C3.menu.UploadSpeed.460800.linux=460800
|
|
Geekble_ESP32C3.menu.UploadSpeed.460800.macosx=460800
|
|
Geekble_ESP32C3.menu.UploadSpeed.460800.upload.speed=460800
|
|
Geekble_ESP32C3.menu.UploadSpeed.512000.windows=512000
|
|
Geekble_ESP32C3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
Geekble_ESP32C3.menu.DebugLevel.none=None
|
|
Geekble_ESP32C3.menu.DebugLevel.none.build.code_debug=0
|
|
Geekble_ESP32C3.menu.DebugLevel.error=Error
|
|
Geekble_ESP32C3.menu.DebugLevel.error.build.code_debug=1
|
|
Geekble_ESP32C3.menu.DebugLevel.warn=Warn
|
|
Geekble_ESP32C3.menu.DebugLevel.warn.build.code_debug=2
|
|
Geekble_ESP32C3.menu.DebugLevel.info=Info
|
|
Geekble_ESP32C3.menu.DebugLevel.info.build.code_debug=3
|
|
Geekble_ESP32C3.menu.DebugLevel.debug=Debug
|
|
Geekble_ESP32C3.menu.DebugLevel.debug.build.code_debug=4
|
|
Geekble_ESP32C3.menu.DebugLevel.verbose=Verbose
|
|
Geekble_ESP32C3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
Geekble_ESP32C3.menu.EraseFlash.none=Disabled
|
|
Geekble_ESP32C3.menu.EraseFlash.none.upload.erase_cmd=
|
|
Geekble_ESP32C3.menu.EraseFlash.all=Enabled
|
|
Geekble_ESP32C3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
waveshare_esp32_s3_zero.name=Waveshare ESP32-S3-Zero
|
|
waveshare_esp32_s3_zero.vid.0=0x303a
|
|
waveshare_esp32_s3_zero.pid.0=0x822B
|
|
waveshare_esp32_s3_zero.upload_port.0.vid=0x303a
|
|
waveshare_esp32_s3_zero.upload_port.0.pid=0x822B
|
|
|
|
waveshare_esp32_s3_zero.bootloader.tool=esptool_py
|
|
waveshare_esp32_s3_zero.bootloader.tool.default=esptool_py
|
|
|
|
waveshare_esp32_s3_zero.upload.tool=esptool_py
|
|
waveshare_esp32_s3_zero.upload.tool.default=esptool_py
|
|
waveshare_esp32_s3_zero.upload.tool.network=esp_ota
|
|
|
|
waveshare_esp32_s3_zero.upload.maximum_size=1310720
|
|
|
|
waveshare_esp32_s3_zero.upload.maximum_data_size=327680
|
|
waveshare_esp32_s3_zero.upload.flags=
|
|
waveshare_esp32_s3_zero.upload.extra_flags=
|
|
waveshare_esp32_s3_zero.upload.use_1200bps_touch=false
|
|
waveshare_esp32_s3_zero.upload.wait_for_upload_port=false
|
|
|
|
waveshare_esp32_s3_zero.serial.disableDTR=false
|
|
waveshare_esp32_s3_zero.serial.disableRTS=false
|
|
|
|
waveshare_esp32_s3_zero.build.tarch=xtensa
|
|
waveshare_esp32_s3_zero.build.bootloader_addr=0x0
|
|
waveshare_esp32_s3_zero.build.target=esp32s3
|
|
waveshare_esp32_s3_zero.build.mcu=esp32s3
|
|
waveshare_esp32_s3_zero.build.core=esp32
|
|
waveshare_esp32_s3_zero.build.variant=waveshare_esp32_s3_zero
|
|
waveshare_esp32_s3_zero.build.board=WAVESHARE_ESP32_S3_ZERO
|
|
|
|
waveshare_esp32_s3_zero.build.usb_mode=1
|
|
waveshare_esp32_s3_zero.build.cdc_on_boot=0
|
|
waveshare_esp32_s3_zero.build.msc_on_boot=0
|
|
waveshare_esp32_s3_zero.build.dfu_on_boot=0
|
|
waveshare_esp32_s3_zero.build.f_cpu=240000000L
|
|
waveshare_esp32_s3_zero.build.flash_size=4MB
|
|
waveshare_esp32_s3_zero.build.flash_freq=80m
|
|
waveshare_esp32_s3_zero.build.flash_mode=dio
|
|
waveshare_esp32_s3_zero.build.boot=qio
|
|
waveshare_esp32_s3_zero.build.boot_freq=80m
|
|
waveshare_esp32_s3_zero.build.partitions=default
|
|
waveshare_esp32_s3_zero.build.defines=
|
|
waveshare_esp32_s3_zero.build.loop_core=
|
|
waveshare_esp32_s3_zero.build.event_core=
|
|
waveshare_esp32_s3_zero.build.psram_type=qspi
|
|
waveshare_esp32_s3_zero.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
waveshare_esp32_s3_zero.menu.PSRAM.disabled=Disabled
|
|
waveshare_esp32_s3_zero.menu.PSRAM.disabled.build.defines=
|
|
waveshare_esp32_s3_zero.menu.PSRAM.disabled.build.psram_type=qspi
|
|
waveshare_esp32_s3_zero.menu.PSRAM.enabled=Enabled
|
|
waveshare_esp32_s3_zero.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
waveshare_esp32_s3_zero.menu.PSRAM.enabled.build.psram_type=qspi
|
|
|
|
waveshare_esp32_s3_zero.menu.FlashMode.qio=QIO 80MHz
|
|
waveshare_esp32_s3_zero.menu.FlashMode.qio.build.flash_mode=dio
|
|
waveshare_esp32_s3_zero.menu.FlashMode.qio.build.boot=qio
|
|
waveshare_esp32_s3_zero.menu.FlashMode.qio.build.boot_freq=80m
|
|
waveshare_esp32_s3_zero.menu.FlashMode.qio.build.flash_freq=80m
|
|
waveshare_esp32_s3_zero.menu.FlashMode.qio120=QIO 120MHz
|
|
waveshare_esp32_s3_zero.menu.FlashMode.qio120.build.flash_mode=dio
|
|
waveshare_esp32_s3_zero.menu.FlashMode.qio120.build.boot=qio
|
|
waveshare_esp32_s3_zero.menu.FlashMode.qio120.build.boot_freq=120m
|
|
waveshare_esp32_s3_zero.menu.FlashMode.qio120.build.flash_freq=80m
|
|
|
|
waveshare_esp32_s3_zero.menu.LoopCore.1=Core 1
|
|
waveshare_esp32_s3_zero.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
waveshare_esp32_s3_zero.menu.LoopCore.0=Core 0
|
|
waveshare_esp32_s3_zero.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
waveshare_esp32_s3_zero.menu.EventsCore.1=Core 1
|
|
waveshare_esp32_s3_zero.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
waveshare_esp32_s3_zero.menu.EventsCore.0=Core 0
|
|
waveshare_esp32_s3_zero.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
waveshare_esp32_s3_zero.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
waveshare_esp32_s3_zero.menu.USBMode.hwcdc.build.usb_mode=1
|
|
waveshare_esp32_s3_zero.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
waveshare_esp32_s3_zero.menu.USBMode.default.build.usb_mode=0
|
|
|
|
waveshare_esp32_s3_zero.menu.CDCOnBoot.default=Disabled
|
|
waveshare_esp32_s3_zero.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
waveshare_esp32_s3_zero.menu.CDCOnBoot.cdc=Enabled
|
|
waveshare_esp32_s3_zero.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
waveshare_esp32_s3_zero.menu.MSCOnBoot.default=Disabled
|
|
waveshare_esp32_s3_zero.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
waveshare_esp32_s3_zero.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
waveshare_esp32_s3_zero.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
waveshare_esp32_s3_zero.menu.DFUOnBoot.default=Disabled
|
|
waveshare_esp32_s3_zero.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
waveshare_esp32_s3_zero.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
waveshare_esp32_s3_zero.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
waveshare_esp32_s3_zero.menu.UploadMode.default=UART0 / Hardware CDC
|
|
waveshare_esp32_s3_zero.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
waveshare_esp32_s3_zero.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
waveshare_esp32_s3_zero.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
waveshare_esp32_s3_zero.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
waveshare_esp32_s3_zero.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.default.build.partitions=default
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.otanofs=OTA no FS (2MB APP with OTA)
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.otanofs.build.custom_partitions=ota_nofs_4MB
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.otanofs.upload.maximum_size=2031616
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.all_app=Max APP (4MB APP no OTA)
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.all_app.build.custom_partitions=max_app_4MB
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.all_app.upload.maximum_size=4063232
|
|
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.custom=Custom
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.custom.build.partitions=
|
|
waveshare_esp32_s3_zero.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
waveshare_esp32_s3_zero.menu.CPUFreq.240=240MHz (WiFi)
|
|
waveshare_esp32_s3_zero.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
waveshare_esp32_s3_zero.menu.CPUFreq.160=160MHz (WiFi)
|
|
waveshare_esp32_s3_zero.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
waveshare_esp32_s3_zero.menu.CPUFreq.80=80MHz (WiFi)
|
|
waveshare_esp32_s3_zero.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
waveshare_esp32_s3_zero.menu.CPUFreq.40=40MHz
|
|
waveshare_esp32_s3_zero.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
waveshare_esp32_s3_zero.menu.CPUFreq.20=20MHz
|
|
waveshare_esp32_s3_zero.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
waveshare_esp32_s3_zero.menu.CPUFreq.10=10MHz
|
|
waveshare_esp32_s3_zero.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
waveshare_esp32_s3_zero.menu.UploadSpeed.921600=921600
|
|
waveshare_esp32_s3_zero.menu.UploadSpeed.921600.upload.speed=921600
|
|
waveshare_esp32_s3_zero.menu.UploadSpeed.115200=115200
|
|
waveshare_esp32_s3_zero.menu.UploadSpeed.115200.upload.speed=115200
|
|
waveshare_esp32_s3_zero.menu.UploadSpeed.256000.windows=256000
|
|
waveshare_esp32_s3_zero.menu.UploadSpeed.256000.upload.speed=256000
|
|
waveshare_esp32_s3_zero.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
waveshare_esp32_s3_zero.menu.UploadSpeed.230400=230400
|
|
waveshare_esp32_s3_zero.menu.UploadSpeed.230400.upload.speed=230400
|
|
waveshare_esp32_s3_zero.menu.UploadSpeed.460800.linux=460800
|
|
waveshare_esp32_s3_zero.menu.UploadSpeed.460800.macosx=460800
|
|
waveshare_esp32_s3_zero.menu.UploadSpeed.460800.upload.speed=460800
|
|
waveshare_esp32_s3_zero.menu.UploadSpeed.512000.windows=512000
|
|
waveshare_esp32_s3_zero.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
waveshare_esp32_s3_zero.menu.DebugLevel.none=None
|
|
waveshare_esp32_s3_zero.menu.DebugLevel.none.build.code_debug=0
|
|
waveshare_esp32_s3_zero.menu.DebugLevel.error=Error
|
|
waveshare_esp32_s3_zero.menu.DebugLevel.error.build.code_debug=1
|
|
waveshare_esp32_s3_zero.menu.DebugLevel.warn=Warn
|
|
waveshare_esp32_s3_zero.menu.DebugLevel.warn.build.code_debug=2
|
|
waveshare_esp32_s3_zero.menu.DebugLevel.info=Info
|
|
waveshare_esp32_s3_zero.menu.DebugLevel.info.build.code_debug=3
|
|
waveshare_esp32_s3_zero.menu.DebugLevel.debug=Debug
|
|
waveshare_esp32_s3_zero.menu.DebugLevel.debug.build.code_debug=4
|
|
waveshare_esp32_s3_zero.menu.DebugLevel.verbose=Verbose
|
|
waveshare_esp32_s3_zero.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
waveshare_esp32_s3_zero.menu.EraseFlash.none=Disabled
|
|
waveshare_esp32_s3_zero.menu.EraseFlash.none.upload.erase_cmd=
|
|
waveshare_esp32_s3_zero.menu.EraseFlash.all=Enabled
|
|
waveshare_esp32_s3_zero.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
######################################################
|
|
|
|
ws_esp32_s3_matrix.name=Waveshare ESP32-S3-Matrix
|
|
ws_esp32_s3_matrix.vid.0=0x303a
|
|
ws_esp32_s3_matrix.pid.0=0x81FB
|
|
ws_esp32_s3_matrix.upload_port.0.vid=0x303a
|
|
ws_esp32_s3_matrix.upload_port.0.pid=0x81FB
|
|
|
|
ws_esp32_s3_matrix.bootloader.tool=esptool_py
|
|
ws_esp32_s3_matrix.bootloader.tool.default=esptool_py
|
|
|
|
ws_esp32_s3_matrix.upload.tool=esptool_py
|
|
ws_esp32_s3_matrix.upload.tool.default=esptool_py
|
|
ws_esp32_s3_matrix.upload.tool.network=esp_ota
|
|
|
|
ws_esp32_s3_matrix.upload.maximum_size=1310720
|
|
|
|
ws_esp32_s3_matrix.upload.maximum_data_size=327680
|
|
ws_esp32_s3_matrix.upload.flags=
|
|
ws_esp32_s3_matrix.upload.extra_flags=
|
|
ws_esp32_s3_matrix.upload.use_1200bps_touch=false
|
|
ws_esp32_s3_matrix.upload.wait_for_upload_port=false
|
|
|
|
ws_esp32_s3_matrix.serial.disableDTR=false
|
|
ws_esp32_s3_matrix.serial.disableRTS=false
|
|
|
|
ws_esp32_s3_matrix.build.tarch=xtensa
|
|
ws_esp32_s3_matrix.build.bootloader_addr=0x0
|
|
ws_esp32_s3_matrix.build.target=esp32s3
|
|
ws_esp32_s3_matrix.build.mcu=esp32s3
|
|
ws_esp32_s3_matrix.build.core=esp32
|
|
ws_esp32_s3_matrix.build.variant=ws_esp32_s3_matrix
|
|
ws_esp32_s3_matrix.build.board=WS_ESP32_S3_MATRIX
|
|
|
|
ws_esp32_s3_matrix.build.usb_mode=1
|
|
ws_esp32_s3_matrix.build.cdc_on_boot=0
|
|
ws_esp32_s3_matrix.build.msc_on_boot=0
|
|
ws_esp32_s3_matrix.build.dfu_on_boot=0
|
|
ws_esp32_s3_matrix.build.f_cpu=240000000L
|
|
ws_esp32_s3_matrix.build.flash_size=4MB
|
|
ws_esp32_s3_matrix.build.flash_freq=80m
|
|
ws_esp32_s3_matrix.build.flash_mode=dio
|
|
ws_esp32_s3_matrix.build.boot=qio
|
|
ws_esp32_s3_matrix.build.boot_freq=80m
|
|
ws_esp32_s3_matrix.build.partitions=default
|
|
ws_esp32_s3_matrix.build.defines=
|
|
ws_esp32_s3_matrix.build.loop_core=
|
|
ws_esp32_s3_matrix.build.event_core=
|
|
ws_esp32_s3_matrix.build.psram_type=qspi
|
|
ws_esp32_s3_matrix.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
ws_esp32_s3_matrix.menu.PSRAM.disabled=Disabled
|
|
ws_esp32_s3_matrix.menu.PSRAM.disabled.build.defines=
|
|
ws_esp32_s3_matrix.menu.PSRAM.disabled.build.psram_type=qspi
|
|
ws_esp32_s3_matrix.menu.PSRAM.enabled=Enabled
|
|
ws_esp32_s3_matrix.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
ws_esp32_s3_matrix.menu.PSRAM.enabled.build.psram_type=qspi
|
|
|
|
ws_esp32_s3_matrix.menu.FlashMode.qio=QIO 80MHz
|
|
ws_esp32_s3_matrix.menu.FlashMode.qio.build.flash_mode=dio
|
|
ws_esp32_s3_matrix.menu.FlashMode.qio.build.boot=qio
|
|
ws_esp32_s3_matrix.menu.FlashMode.qio.build.boot_freq=80m
|
|
ws_esp32_s3_matrix.menu.FlashMode.qio.build.flash_freq=80m
|
|
ws_esp32_s3_matrix.menu.FlashMode.qio120=QIO 120MHz
|
|
ws_esp32_s3_matrix.menu.FlashMode.qio120.build.flash_mode=dio
|
|
ws_esp32_s3_matrix.menu.FlashMode.qio120.build.boot=qio
|
|
ws_esp32_s3_matrix.menu.FlashMode.qio120.build.boot_freq=120m
|
|
ws_esp32_s3_matrix.menu.FlashMode.qio120.build.flash_freq=80m
|
|
|
|
ws_esp32_s3_matrix.menu.FlashSize.4M=4MB (32Mb)
|
|
ws_esp32_s3_matrix.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
ws_esp32_s3_matrix.menu.LoopCore.1=Core 1
|
|
ws_esp32_s3_matrix.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
ws_esp32_s3_matrix.menu.LoopCore.0=Core 0
|
|
ws_esp32_s3_matrix.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
ws_esp32_s3_matrix.menu.EventsCore.1=Core 1
|
|
ws_esp32_s3_matrix.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
ws_esp32_s3_matrix.menu.EventsCore.0=Core 0
|
|
ws_esp32_s3_matrix.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
ws_esp32_s3_matrix.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
ws_esp32_s3_matrix.menu.USBMode.hwcdc.build.usb_mode=1
|
|
ws_esp32_s3_matrix.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
ws_esp32_s3_matrix.menu.USBMode.default.build.usb_mode=0
|
|
|
|
ws_esp32_s3_matrix.menu.CDCOnBoot.default=Disabled
|
|
ws_esp32_s3_matrix.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
ws_esp32_s3_matrix.menu.CDCOnBoot.cdc=Enabled
|
|
ws_esp32_s3_matrix.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
ws_esp32_s3_matrix.menu.MSCOnBoot.default=Disabled
|
|
ws_esp32_s3_matrix.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
ws_esp32_s3_matrix.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
ws_esp32_s3_matrix.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
ws_esp32_s3_matrix.menu.DFUOnBoot.default=Disabled
|
|
ws_esp32_s3_matrix.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
ws_esp32_s3_matrix.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
ws_esp32_s3_matrix.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
ws_esp32_s3_matrix.menu.UploadMode.default=UART0 / Hardware CDC
|
|
ws_esp32_s3_matrix.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
ws_esp32_s3_matrix.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
ws_esp32_s3_matrix.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
ws_esp32_s3_matrix.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
ws_esp32_s3_matrix.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.default.build.partitions=default
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.otanofs=OTA no FS (2MB APP with OTA)
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.otanofs.build.custom_partitions=partitions_otanofs_4MB
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.otanofs.upload.maximum_size=2031616
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.all_app=Max APP (4MB APP no OTA)
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.all_app.build.custom_partitions=partitions_all_app_4MB
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.all_app.upload.maximum_size=4128768
|
|
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.custom=Custom
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.custom.build.partitions=
|
|
ws_esp32_s3_matrix.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
ws_esp32_s3_matrix.menu.CPUFreq.240=240MHz (WiFi)
|
|
ws_esp32_s3_matrix.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
ws_esp32_s3_matrix.menu.CPUFreq.160=160MHz (WiFi)
|
|
ws_esp32_s3_matrix.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
ws_esp32_s3_matrix.menu.CPUFreq.80=80MHz (WiFi)
|
|
ws_esp32_s3_matrix.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
ws_esp32_s3_matrix.menu.CPUFreq.40=40MHz
|
|
ws_esp32_s3_matrix.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
ws_esp32_s3_matrix.menu.CPUFreq.20=20MHz
|
|
ws_esp32_s3_matrix.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
ws_esp32_s3_matrix.menu.CPUFreq.10=10MHz
|
|
ws_esp32_s3_matrix.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
ws_esp32_s3_matrix.menu.UploadSpeed.921600=921600
|
|
ws_esp32_s3_matrix.menu.UploadSpeed.921600.upload.speed=921600
|
|
ws_esp32_s3_matrix.menu.UploadSpeed.115200=115200
|
|
ws_esp32_s3_matrix.menu.UploadSpeed.115200.upload.speed=115200
|
|
ws_esp32_s3_matrix.menu.UploadSpeed.256000.windows=256000
|
|
ws_esp32_s3_matrix.menu.UploadSpeed.256000.upload.speed=256000
|
|
ws_esp32_s3_matrix.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
ws_esp32_s3_matrix.menu.UploadSpeed.230400=230400
|
|
ws_esp32_s3_matrix.menu.UploadSpeed.230400.upload.speed=230400
|
|
ws_esp32_s3_matrix.menu.UploadSpeed.460800.linux=460800
|
|
ws_esp32_s3_matrix.menu.UploadSpeed.460800.macosx=460800
|
|
ws_esp32_s3_matrix.menu.UploadSpeed.460800.upload.speed=460800
|
|
ws_esp32_s3_matrix.menu.UploadSpeed.512000.windows=512000
|
|
ws_esp32_s3_matrix.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
ws_esp32_s3_matrix.menu.DebugLevel.none=None
|
|
ws_esp32_s3_matrix.menu.DebugLevel.none.build.code_debug=0
|
|
ws_esp32_s3_matrix.menu.DebugLevel.error=Error
|
|
ws_esp32_s3_matrix.menu.DebugLevel.error.build.code_debug=1
|
|
ws_esp32_s3_matrix.menu.DebugLevel.warn=Warn
|
|
ws_esp32_s3_matrix.menu.DebugLevel.warn.build.code_debug=2
|
|
ws_esp32_s3_matrix.menu.DebugLevel.info=Info
|
|
ws_esp32_s3_matrix.menu.DebugLevel.info.build.code_debug=3
|
|
ws_esp32_s3_matrix.menu.DebugLevel.debug=Debug
|
|
ws_esp32_s3_matrix.menu.DebugLevel.debug.build.code_debug=4
|
|
ws_esp32_s3_matrix.menu.DebugLevel.verbose=Verbose
|
|
ws_esp32_s3_matrix.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
ws_esp32_s3_matrix.menu.EraseFlash.none=Disabled
|
|
ws_esp32_s3_matrix.menu.EraseFlash.none.upload.erase_cmd=
|
|
ws_esp32_s3_matrix.menu.EraseFlash.all=Enabled
|
|
ws_esp32_s3_matrix.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.name=Waveshare ESP32-S3-Touch-LCD-1.69
|
|
waveshare_esp32_s3_touch_lcd_169.vid.0=0x303a
|
|
waveshare_esp32_s3_touch_lcd_169.pid.0=0x821E
|
|
waveshare_esp32_s3_touch_lcd_169.upload_port.0.vid=0x303a
|
|
waveshare_esp32_s3_touch_lcd_169.upload_port.0.pid=0x821E
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.bootloader.tool=esptool_py
|
|
waveshare_esp32_s3_touch_lcd_169.bootloader.tool.default=esptool_py
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.upload.tool=esptool_py
|
|
waveshare_esp32_s3_touch_lcd_169.upload.tool.default=esptool_py
|
|
waveshare_esp32_s3_touch_lcd_169.upload.tool.network=esp_ota
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.upload.maximum_size=1310720
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.upload.maximum_data_size=327680
|
|
waveshare_esp32_s3_touch_lcd_169.upload.flags=
|
|
waveshare_esp32_s3_touch_lcd_169.upload.extra_flags=
|
|
waveshare_esp32_s3_touch_lcd_169.upload.use_1200bps_touch=false
|
|
waveshare_esp32_s3_touch_lcd_169.upload.wait_for_upload_port=false
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.serial.disableDTR=false
|
|
waveshare_esp32_s3_touch_lcd_169.serial.disableRTS=false
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.build.tarch=xtensa
|
|
waveshare_esp32_s3_touch_lcd_169.build.bootloader_addr=0x0
|
|
waveshare_esp32_s3_touch_lcd_169.build.target=esp32s3
|
|
waveshare_esp32_s3_touch_lcd_169.build.mcu=esp32s3
|
|
waveshare_esp32_s3_touch_lcd_169.build.core=esp32
|
|
waveshare_esp32_s3_touch_lcd_169.build.variant=waveshare_esp32_s3_touch_lcd_169
|
|
waveshare_esp32_s3_touch_lcd_169.build.board=WAVESHARE_ESP32_S3_TOUCH_LCD_169
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.build.usb_mode=1
|
|
waveshare_esp32_s3_touch_lcd_169.build.cdc_on_boot=0
|
|
waveshare_esp32_s3_touch_lcd_169.build.msc_on_boot=0
|
|
waveshare_esp32_s3_touch_lcd_169.build.dfu_on_boot=0
|
|
waveshare_esp32_s3_touch_lcd_169.build.f_cpu=240000000L
|
|
waveshare_esp32_s3_touch_lcd_169.build.flash_size=16MB
|
|
waveshare_esp32_s3_touch_lcd_169.build.flash_freq=80m
|
|
waveshare_esp32_s3_touch_lcd_169.build.flash_mode=dio
|
|
waveshare_esp32_s3_touch_lcd_169.build.boot=qio
|
|
waveshare_esp32_s3_touch_lcd_169.build.boot_freq=80m
|
|
waveshare_esp32_s3_touch_lcd_169.build.partitions=default
|
|
waveshare_esp32_s3_touch_lcd_169.build.defines=
|
|
waveshare_esp32_s3_touch_lcd_169.build.loop_core=
|
|
waveshare_esp32_s3_touch_lcd_169.build.event_core=
|
|
waveshare_esp32_s3_touch_lcd_169.build.psram_type=qspi
|
|
waveshare_esp32_s3_touch_lcd_169.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PSRAM.disabled=Disabled
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PSRAM.disabled.build.defines=
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PSRAM.disabled.build.psram_type=qspi
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PSRAM.enabled=Enabled
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PSRAM.enabled.build.psram_type=opi
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.menu.FlashMode.qio=QIO 80MHz
|
|
waveshare_esp32_s3_touch_lcd_169.menu.FlashMode.qio.build.flash_mode=dio
|
|
waveshare_esp32_s3_touch_lcd_169.menu.FlashMode.qio.build.boot=qio
|
|
waveshare_esp32_s3_touch_lcd_169.menu.FlashMode.qio.build.boot_freq=80m
|
|
waveshare_esp32_s3_touch_lcd_169.menu.FlashMode.qio.build.flash_freq=80m
|
|
waveshare_esp32_s3_touch_lcd_169.menu.FlashMode.qio120=QIO 120MHz
|
|
waveshare_esp32_s3_touch_lcd_169.menu.FlashMode.qio120.build.flash_mode=dio
|
|
waveshare_esp32_s3_touch_lcd_169.menu.FlashMode.qio120.build.boot=qio
|
|
waveshare_esp32_s3_touch_lcd_169.menu.FlashMode.qio120.build.boot_freq=120m
|
|
waveshare_esp32_s3_touch_lcd_169.menu.FlashMode.qio120.build.flash_freq=80m
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.menu.LoopCore.1=Core 1
|
|
waveshare_esp32_s3_touch_lcd_169.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
waveshare_esp32_s3_touch_lcd_169.menu.LoopCore.0=Core 0
|
|
waveshare_esp32_s3_touch_lcd_169.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.menu.EventsCore.1=Core 1
|
|
waveshare_esp32_s3_touch_lcd_169.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
waveshare_esp32_s3_touch_lcd_169.menu.EventsCore.0=Core 0
|
|
waveshare_esp32_s3_touch_lcd_169.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
waveshare_esp32_s3_touch_lcd_169.menu.USBMode.hwcdc.build.usb_mode=1
|
|
waveshare_esp32_s3_touch_lcd_169.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.USBMode.default.build.usb_mode=0
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.menu.CDCOnBoot.default=Disabled
|
|
waveshare_esp32_s3_touch_lcd_169.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
waveshare_esp32_s3_touch_lcd_169.menu.CDCOnBoot.cdc=Enabled
|
|
waveshare_esp32_s3_touch_lcd_169.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.menu.MSCOnBoot.default=Disabled
|
|
waveshare_esp32_s3_touch_lcd_169.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
waveshare_esp32_s3_touch_lcd_169.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.menu.DFUOnBoot.default=Disabled
|
|
waveshare_esp32_s3_touch_lcd_169.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
waveshare_esp32_s3_touch_lcd_169.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadMode.default=UART0 / Hardware CDC
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.default.build.partitions=default
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.otanofs=OTA no FS (2MB APP with OTA)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.otanofs.build.custom_partitions=partitions_otanofs_4MB
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.otanofs.upload.maximum_size=2031616
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.all_app=Max APP (4MB APP no OTA)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.all_app.build.custom_partitions=partitions_all_app_4MB
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.all_app.upload.maximum_size=4128768
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.custom=Custom
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.custom.build.partitions=
|
|
waveshare_esp32_s3_touch_lcd_169.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.menu.CPUFreq.240=240MHz (WiFi)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
waveshare_esp32_s3_touch_lcd_169.menu.CPUFreq.160=160MHz (WiFi)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
waveshare_esp32_s3_touch_lcd_169.menu.CPUFreq.80=80MHz (WiFi)
|
|
waveshare_esp32_s3_touch_lcd_169.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
waveshare_esp32_s3_touch_lcd_169.menu.CPUFreq.40=40MHz
|
|
waveshare_esp32_s3_touch_lcd_169.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
waveshare_esp32_s3_touch_lcd_169.menu.CPUFreq.20=20MHz
|
|
waveshare_esp32_s3_touch_lcd_169.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
waveshare_esp32_s3_touch_lcd_169.menu.CPUFreq.10=10MHz
|
|
waveshare_esp32_s3_touch_lcd_169.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadSpeed.921600=921600
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadSpeed.921600.upload.speed=921600
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadSpeed.115200=115200
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadSpeed.115200.upload.speed=115200
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadSpeed.256000.windows=256000
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadSpeed.256000.upload.speed=256000
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadSpeed.230400=230400
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadSpeed.230400.upload.speed=230400
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadSpeed.460800.linux=460800
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadSpeed.460800.macosx=460800
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadSpeed.460800.upload.speed=460800
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadSpeed.512000.windows=512000
|
|
waveshare_esp32_s3_touch_lcd_169.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.menu.DebugLevel.none=None
|
|
waveshare_esp32_s3_touch_lcd_169.menu.DebugLevel.none.build.code_debug=0
|
|
waveshare_esp32_s3_touch_lcd_169.menu.DebugLevel.error=Error
|
|
waveshare_esp32_s3_touch_lcd_169.menu.DebugLevel.error.build.code_debug=1
|
|
waveshare_esp32_s3_touch_lcd_169.menu.DebugLevel.warn=Warn
|
|
waveshare_esp32_s3_touch_lcd_169.menu.DebugLevel.warn.build.code_debug=2
|
|
waveshare_esp32_s3_touch_lcd_169.menu.DebugLevel.info=Info
|
|
waveshare_esp32_s3_touch_lcd_169.menu.DebugLevel.info.build.code_debug=3
|
|
waveshare_esp32_s3_touch_lcd_169.menu.DebugLevel.debug=Debug
|
|
waveshare_esp32_s3_touch_lcd_169.menu.DebugLevel.debug.build.code_debug=4
|
|
waveshare_esp32_s3_touch_lcd_169.menu.DebugLevel.verbose=Verbose
|
|
waveshare_esp32_s3_touch_lcd_169.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
waveshare_esp32_s3_touch_lcd_169.menu.EraseFlash.none=Disabled
|
|
waveshare_esp32_s3_touch_lcd_169.menu.EraseFlash.none.upload.erase_cmd=
|
|
waveshare_esp32_s3_touch_lcd_169.menu.EraseFlash.all=Enabled
|
|
waveshare_esp32_s3_touch_lcd_169.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
waveshare_esp32_s3_lcd_169.name=Waveshare ESP32-S3-LCD-1.69
|
|
waveshare_esp32_s3_lcd_169.vid.0=0x303a
|
|
waveshare_esp32_s3_lcd_169.pid.0=0x8221
|
|
waveshare_esp32_s3_lcd_169.upload_port.0.vid=0x303a
|
|
waveshare_esp32_s3_lcd_169.upload_port.0.pid=0x8221
|
|
|
|
waveshare_esp32_s3_lcd_169.bootloader.tool=esptool_py
|
|
waveshare_esp32_s3_lcd_169.bootloader.tool.default=esptool_py
|
|
|
|
waveshare_esp32_s3_lcd_169.upload.tool=esptool_py
|
|
waveshare_esp32_s3_lcd_169.upload.tool.default=esptool_py
|
|
waveshare_esp32_s3_lcd_169.upload.tool.network=esp_ota
|
|
|
|
waveshare_esp32_s3_lcd_169.upload.maximum_size=1310720
|
|
|
|
waveshare_esp32_s3_lcd_169.upload.maximum_data_size=327680
|
|
waveshare_esp32_s3_lcd_169.upload.flags=
|
|
waveshare_esp32_s3_lcd_169.upload.extra_flags=
|
|
waveshare_esp32_s3_lcd_169.upload.use_1200bps_touch=false
|
|
waveshare_esp32_s3_lcd_169.upload.wait_for_upload_port=false
|
|
|
|
waveshare_esp32_s3_lcd_169.serial.disableDTR=false
|
|
waveshare_esp32_s3_lcd_169.serial.disableRTS=false
|
|
|
|
waveshare_esp32_s3_lcd_169.build.tarch=xtensa
|
|
waveshare_esp32_s3_lcd_169.build.bootloader_addr=0x0
|
|
waveshare_esp32_s3_lcd_169.build.target=esp32s3
|
|
waveshare_esp32_s3_lcd_169.build.mcu=esp32s3
|
|
waveshare_esp32_s3_lcd_169.build.core=esp32
|
|
waveshare_esp32_s3_lcd_169.build.variant=waveshare_esp32_s3_lcd_169
|
|
waveshare_esp32_s3_lcd_169.build.board=WAVESHARE_ESP32_S3_LCD_169
|
|
|
|
waveshare_esp32_s3_lcd_169.build.usb_mode=1
|
|
waveshare_esp32_s3_lcd_169.build.cdc_on_boot=0
|
|
waveshare_esp32_s3_lcd_169.build.msc_on_boot=0
|
|
waveshare_esp32_s3_lcd_169.build.dfu_on_boot=0
|
|
waveshare_esp32_s3_lcd_169.build.f_cpu=240000000L
|
|
waveshare_esp32_s3_lcd_169.build.flash_size=16MB
|
|
waveshare_esp32_s3_lcd_169.build.flash_freq=80m
|
|
waveshare_esp32_s3_lcd_169.build.flash_mode=dio
|
|
waveshare_esp32_s3_lcd_169.build.boot=qio
|
|
waveshare_esp32_s3_lcd_169.build.boot_freq=80m
|
|
waveshare_esp32_s3_lcd_169.build.partitions=default
|
|
waveshare_esp32_s3_lcd_169.build.defines=
|
|
waveshare_esp32_s3_lcd_169.build.loop_core=
|
|
waveshare_esp32_s3_lcd_169.build.event_core=
|
|
waveshare_esp32_s3_lcd_169.build.psram_type=qspi
|
|
waveshare_esp32_s3_lcd_169.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
waveshare_esp32_s3_lcd_169.menu.PSRAM.disabled=Disabled
|
|
waveshare_esp32_s3_lcd_169.menu.PSRAM.disabled.build.defines=
|
|
waveshare_esp32_s3_lcd_169.menu.PSRAM.disabled.build.psram_type=qspi
|
|
waveshare_esp32_s3_lcd_169.menu.PSRAM.enabled=Enabled
|
|
waveshare_esp32_s3_lcd_169.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
waveshare_esp32_s3_lcd_169.menu.PSRAM.enabled.build.psram_type=opi
|
|
|
|
waveshare_esp32_s3_lcd_169.menu.FlashMode.qio=QIO 80MHz
|
|
waveshare_esp32_s3_lcd_169.menu.FlashMode.qio.build.flash_mode=dio
|
|
waveshare_esp32_s3_lcd_169.menu.FlashMode.qio.build.boot=qio
|
|
waveshare_esp32_s3_lcd_169.menu.FlashMode.qio.build.boot_freq=80m
|
|
waveshare_esp32_s3_lcd_169.menu.FlashMode.qio.build.flash_freq=80m
|
|
waveshare_esp32_s3_lcd_169.menu.FlashMode.qio120=QIO 120MHz
|
|
waveshare_esp32_s3_lcd_169.menu.FlashMode.qio120.build.flash_mode=dio
|
|
waveshare_esp32_s3_lcd_169.menu.FlashMode.qio120.build.boot=qio
|
|
waveshare_esp32_s3_lcd_169.menu.FlashMode.qio120.build.boot_freq=120m
|
|
waveshare_esp32_s3_lcd_169.menu.FlashMode.qio120.build.flash_freq=80m
|
|
|
|
waveshare_esp32_s3_lcd_169.menu.LoopCore.1=Core 1
|
|
waveshare_esp32_s3_lcd_169.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
waveshare_esp32_s3_lcd_169.menu.LoopCore.0=Core 0
|
|
waveshare_esp32_s3_lcd_169.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
waveshare_esp32_s3_lcd_169.menu.EventsCore.1=Core 1
|
|
waveshare_esp32_s3_lcd_169.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
waveshare_esp32_s3_lcd_169.menu.EventsCore.0=Core 0
|
|
waveshare_esp32_s3_lcd_169.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
waveshare_esp32_s3_lcd_169.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
waveshare_esp32_s3_lcd_169.menu.USBMode.hwcdc.build.usb_mode=1
|
|
waveshare_esp32_s3_lcd_169.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
waveshare_esp32_s3_lcd_169.menu.USBMode.default.build.usb_mode=0
|
|
|
|
waveshare_esp32_s3_lcd_169.menu.CDCOnBoot.default=Disabled
|
|
waveshare_esp32_s3_lcd_169.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
waveshare_esp32_s3_lcd_169.menu.CDCOnBoot.cdc=Enabled
|
|
waveshare_esp32_s3_lcd_169.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
waveshare_esp32_s3_lcd_169.menu.MSCOnBoot.default=Disabled
|
|
waveshare_esp32_s3_lcd_169.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
waveshare_esp32_s3_lcd_169.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
waveshare_esp32_s3_lcd_169.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
waveshare_esp32_s3_lcd_169.menu.DFUOnBoot.default=Disabled
|
|
waveshare_esp32_s3_lcd_169.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
waveshare_esp32_s3_lcd_169.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
waveshare_esp32_s3_lcd_169.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
waveshare_esp32_s3_lcd_169.menu.UploadMode.default=UART0 / Hardware CDC
|
|
waveshare_esp32_s3_lcd_169.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
waveshare_esp32_s3_lcd_169.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
waveshare_esp32_s3_lcd_169.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
waveshare_esp32_s3_lcd_169.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
waveshare_esp32_s3_lcd_169.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.default.build.partitions=default
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.otanofs=OTA no FS (2MB APP with OTA)
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.otanofs.build.custom_partitions=partitions_otanofs_4MB
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.otanofs.upload.maximum_size=2031616
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.all_app=Max APP (4MB APP no OTA)
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.all_app.build.custom_partitions=partitions_all_app_4MB
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.all_app.upload.maximum_size=4128768
|
|
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.custom=Custom
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.custom.build.partitions=
|
|
waveshare_esp32_s3_lcd_169.menu.PartitionScheme.custom.upload.maximum_size=16777216
|
|
|
|
waveshare_esp32_s3_lcd_169.menu.CPUFreq.240=240MHz (WiFi)
|
|
waveshare_esp32_s3_lcd_169.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
waveshare_esp32_s3_lcd_169.menu.CPUFreq.160=160MHz (WiFi)
|
|
waveshare_esp32_s3_lcd_169.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
waveshare_esp32_s3_lcd_169.menu.CPUFreq.80=80MHz (WiFi)
|
|
waveshare_esp32_s3_lcd_169.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
waveshare_esp32_s3_lcd_169.menu.CPUFreq.40=40MHz
|
|
waveshare_esp32_s3_lcd_169.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
waveshare_esp32_s3_lcd_169.menu.CPUFreq.20=20MHz
|
|
waveshare_esp32_s3_lcd_169.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
waveshare_esp32_s3_lcd_169.menu.CPUFreq.10=10MHz
|
|
waveshare_esp32_s3_lcd_169.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
waveshare_esp32_s3_lcd_169.menu.UploadSpeed.921600=921600
|
|
waveshare_esp32_s3_lcd_169.menu.UploadSpeed.921600.upload.speed=921600
|
|
waveshare_esp32_s3_lcd_169.menu.UploadSpeed.115200=115200
|
|
waveshare_esp32_s3_lcd_169.menu.UploadSpeed.115200.upload.speed=115200
|
|
waveshare_esp32_s3_lcd_169.menu.UploadSpeed.256000.windows=256000
|
|
waveshare_esp32_s3_lcd_169.menu.UploadSpeed.256000.upload.speed=256000
|
|
waveshare_esp32_s3_lcd_169.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
waveshare_esp32_s3_lcd_169.menu.UploadSpeed.230400=230400
|
|
waveshare_esp32_s3_lcd_169.menu.UploadSpeed.230400.upload.speed=230400
|
|
waveshare_esp32_s3_lcd_169.menu.UploadSpeed.460800.linux=460800
|
|
waveshare_esp32_s3_lcd_169.menu.UploadSpeed.460800.macosx=460800
|
|
waveshare_esp32_s3_lcd_169.menu.UploadSpeed.460800.upload.speed=460800
|
|
waveshare_esp32_s3_lcd_169.menu.UploadSpeed.512000.windows=512000
|
|
waveshare_esp32_s3_lcd_169.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
waveshare_esp32_s3_lcd_169.menu.DebugLevel.none=None
|
|
waveshare_esp32_s3_lcd_169.menu.DebugLevel.none.build.code_debug=0
|
|
waveshare_esp32_s3_lcd_169.menu.DebugLevel.error=Error
|
|
waveshare_esp32_s3_lcd_169.menu.DebugLevel.error.build.code_debug=1
|
|
waveshare_esp32_s3_lcd_169.menu.DebugLevel.warn=Warn
|
|
waveshare_esp32_s3_lcd_169.menu.DebugLevel.warn.build.code_debug=2
|
|
waveshare_esp32_s3_lcd_169.menu.DebugLevel.info=Info
|
|
waveshare_esp32_s3_lcd_169.menu.DebugLevel.info.build.code_debug=3
|
|
waveshare_esp32_s3_lcd_169.menu.DebugLevel.debug=Debug
|
|
waveshare_esp32_s3_lcd_169.menu.DebugLevel.debug.build.code_debug=4
|
|
waveshare_esp32_s3_lcd_169.menu.DebugLevel.verbose=Verbose
|
|
waveshare_esp32_s3_lcd_169.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
waveshare_esp32_s3_lcd_169.menu.EraseFlash.none=Disabled
|
|
waveshare_esp32_s3_lcd_169.menu.EraseFlash.none.upload.erase_cmd=
|
|
waveshare_esp32_s3_lcd_169.menu.EraseFlash.all=Enabled
|
|
waveshare_esp32_s3_lcd_169.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
waveshare_esp32s3_touch_lcd_128.name=Waveshare ESP32S3 Touch LCD 128
|
|
|
|
waveshare_esp32s3_touch_lcd_128.upload.tool=esptool_py
|
|
waveshare_esp32s3_touch_lcd_128.upload.tool.default=esptool_py
|
|
waveshare_esp32s3_touch_lcd_128.upload.tool.network=esp_ota
|
|
waveshare_esp32s3_touch_lcd_128.upload.maximum_size=16777216
|
|
waveshare_esp32s3_touch_lcd_128.upload.maximum_data_size=327680
|
|
waveshare_esp32s3_touch_lcd_128.upload.wait_for_upload_port=false
|
|
waveshare_esp32s3_touch_lcd_128.upload.speed=460800
|
|
waveshare_esp32s3_touch_lcd_128.upload.flags=
|
|
waveshare_esp32s3_touch_lcd_128.upload.extra_flags=
|
|
|
|
waveshare_esp32s3_touch_lcd_128.bootloader.tool=esptool_py
|
|
waveshare_esp32s3_touch_lcd_128.bootloader.tool.default=esptool_py
|
|
|
|
waveshare_esp32s3_touch_lcd_128.serial.disableDTR=true
|
|
waveshare_esp32s3_touch_lcd_128.serial.disableRTS=true
|
|
|
|
waveshare_esp32s3_touch_lcd_128.build.tarch=xtensa
|
|
waveshare_esp32s3_touch_lcd_128.build.bootloader_addr=0x0
|
|
waveshare_esp32s3_touch_lcd_128.build.mcu=esp32s3
|
|
waveshare_esp32s3_touch_lcd_128.build.core=esp32
|
|
waveshare_esp32s3_touch_lcd_128.build.target=esp32s3
|
|
waveshare_esp32s3_touch_lcd_128.build.variant=waveshare_esp32s3_touch_lcd_128
|
|
waveshare_esp32s3_touch_lcd_128.build.board=WAVESHARE_ESP32S3_TOUCH_LCD_128
|
|
|
|
waveshare_esp32s3_touch_lcd_128.build.usb_mode=1
|
|
waveshare_esp32s3_touch_lcd_128.build.cdc_on_boot=1
|
|
waveshare_esp32s3_touch_lcd_128.build.msc_on_boot=0
|
|
waveshare_esp32s3_touch_lcd_128.build.dfu_on_boot=0
|
|
|
|
waveshare_esp32s3_touch_lcd_128.build.f_cpu=240000000L
|
|
waveshare_esp32s3_touch_lcd_128.build.flash_size=16MB
|
|
waveshare_esp32s3_touch_lcd_128.build.flash_freq=80m
|
|
waveshare_esp32s3_touch_lcd_128.build.flash_mode=dio
|
|
waveshare_esp32s3_touch_lcd_128.build.boot=dio
|
|
waveshare_esp32s3_touch_lcd_128.build.partitions=default
|
|
|
|
waveshare_esp32s3_touch_lcd_128.menu.PSRAM.disabled=Disabled
|
|
waveshare_esp32s3_touch_lcd_128.menu.PSRAM.disabled.build.defines=
|
|
waveshare_esp32s3_touch_lcd_128.menu.PSRAM.enabled=Enabled
|
|
waveshare_esp32s3_touch_lcd_128.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
waveshare_esp32s3_touch_lcd_128.menu.PSRAM.enabled.build.psram_type=qspi
|
|
|
|
waveshare_esp32s3_touch_lcd_128.menu.LoopCore.1=Core 1
|
|
waveshare_esp32s3_touch_lcd_128.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
waveshare_esp32s3_touch_lcd_128.menu.LoopCore.0=Core 0
|
|
waveshare_esp32s3_touch_lcd_128.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
waveshare_esp32s3_touch_lcd_128.menu.EventsCore.1=Core 1
|
|
waveshare_esp32s3_touch_lcd_128.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
waveshare_esp32s3_touch_lcd_128.menu.EventsCore.0=Core 0
|
|
waveshare_esp32s3_touch_lcd_128.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.default.build.partitions=default
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9MB FATFS)
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
waveshare_esp32s3_touch_lcd_128.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
|
|
waveshare_esp32s3_touch_lcd_128.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
waveshare_esp32s3_touch_lcd_128.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
waveshare_esp32s3_touch_lcd_128.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
waveshare_esp32s3_touch_lcd_128.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
waveshare_esp32s3_touch_lcd_128.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
waveshare_esp32s3_touch_lcd_128.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
waveshare_esp32s3_touch_lcd_128.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
waveshare_esp32s3_touch_lcd_128.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
waveshare_esp32s3_touch_lcd_128.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
waveshare_esp32s3_touch_lcd_128.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
waveshare_esp32s3_touch_lcd_128.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
waveshare_esp32s3_touch_lcd_128.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
waveshare_esp32s3_touch_lcd_128.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
waveshare_esp32s3_touch_lcd_128.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
waveshare_esp32s3_touch_lcd_128.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
waveshare_esp32s3_touch_lcd_128.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
waveshare_esp32s3_touch_lcd_128.menu.FlashMode.qio=QIO
|
|
waveshare_esp32s3_touch_lcd_128.menu.FlashMode.qio.build.flash_mode=dio
|
|
waveshare_esp32s3_touch_lcd_128.menu.FlashMode.qio.build.boot=qio
|
|
waveshare_esp32s3_touch_lcd_128.menu.FlashMode.dio=DIO
|
|
waveshare_esp32s3_touch_lcd_128.menu.FlashMode.dio.build.flash_mode=dio
|
|
waveshare_esp32s3_touch_lcd_128.menu.FlashMode.dio.build.boot=dio
|
|
|
|
waveshare_esp32s3_touch_lcd_128.menu.FlashFreq.80=80MHz
|
|
waveshare_esp32s3_touch_lcd_128.menu.FlashFreq.80.build.flash_freq=80m
|
|
waveshare_esp32s3_touch_lcd_128.menu.FlashFreq.40=40MHz
|
|
waveshare_esp32s3_touch_lcd_128.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
waveshare_esp32s3_touch_lcd_128.menu.FlashSize.16M=16MB (128Mb)
|
|
waveshare_esp32s3_touch_lcd_128.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
waveshare_esp32s3_touch_lcd_128.menu.UploadSpeed.921600=921600
|
|
waveshare_esp32s3_touch_lcd_128.menu.UploadSpeed.921600.upload.speed=921600
|
|
waveshare_esp32s3_touch_lcd_128.menu.UploadSpeed.115200=115200
|
|
waveshare_esp32s3_touch_lcd_128.menu.UploadSpeed.115200.upload.speed=115200
|
|
waveshare_esp32s3_touch_lcd_128.menu.UploadSpeed.256000.windows=256000
|
|
waveshare_esp32s3_touch_lcd_128.menu.UploadSpeed.256000.upload.speed=256000
|
|
waveshare_esp32s3_touch_lcd_128.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
waveshare_esp32s3_touch_lcd_128.menu.UploadSpeed.230400=230400
|
|
waveshare_esp32s3_touch_lcd_128.menu.UploadSpeed.230400.upload.speed=230400
|
|
waveshare_esp32s3_touch_lcd_128.menu.UploadSpeed.460800.linux=460800
|
|
waveshare_esp32s3_touch_lcd_128.menu.UploadSpeed.460800.macosx=460800
|
|
waveshare_esp32s3_touch_lcd_128.menu.UploadSpeed.460800.upload.speed=460800
|
|
waveshare_esp32s3_touch_lcd_128.menu.UploadSpeed.512000.windows=512000
|
|
waveshare_esp32s3_touch_lcd_128.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
waveshare_esp32s3_touch_lcd_128.menu.DebugLevel.none=None
|
|
waveshare_esp32s3_touch_lcd_128.menu.DebugLevel.none.build.code_debug=0
|
|
waveshare_esp32s3_touch_lcd_128.menu.DebugLevel.error=Error
|
|
waveshare_esp32s3_touch_lcd_128.menu.DebugLevel.error.build.code_debug=1
|
|
waveshare_esp32s3_touch_lcd_128.menu.DebugLevel.warn=Warn
|
|
waveshare_esp32s3_touch_lcd_128.menu.DebugLevel.warn.build.code_debug=2
|
|
waveshare_esp32s3_touch_lcd_128.menu.DebugLevel.info=Info
|
|
waveshare_esp32s3_touch_lcd_128.menu.DebugLevel.info.build.code_debug=3
|
|
waveshare_esp32s3_touch_lcd_128.menu.DebugLevel.debug=Debug
|
|
waveshare_esp32s3_touch_lcd_128.menu.DebugLevel.debug.build.code_debug=4
|
|
waveshare_esp32s3_touch_lcd_128.menu.DebugLevel.verbose=Verbose
|
|
waveshare_esp32s3_touch_lcd_128.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
waveshare_esp32s3_touch_lcd_128.menu.EraseFlash.none=Disabled
|
|
waveshare_esp32s3_touch_lcd_128.menu.EraseFlash.none.upload.erase_cmd=
|
|
waveshare_esp32s3_touch_lcd_128.menu.EraseFlash.all=Enabled
|
|
waveshare_esp32s3_touch_lcd_128.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
weact_studio_esp32c3.name=WeAct Studio ESP32C3
|
|
|
|
weact_studio_esp32c3.upload.tool=esptool_py
|
|
weact_studio_esp32c3.upload.tool.default=esptool_py
|
|
weact_studio_esp32c3.upload.tool.network=esp_ota
|
|
weact_studio_esp32c3.upload.maximum_size=1310720
|
|
weact_studio_esp32c3.upload.maximum_data_size=327680
|
|
weact_studio_esp32c3.upload.flags=
|
|
weact_studio_esp32c3.upload.extra_flags=
|
|
weact_studio_esp32c3.upload.use_1200bps_touch=false
|
|
weact_studio_esp32c3.upload.wait_for_upload_port=false
|
|
|
|
weact_studio_esp32c3.serial.disableDTR=false
|
|
weact_studio_esp32c3.serial.disableRTS=false
|
|
|
|
weact_studio_esp32c3.build.tarch=riscv32
|
|
weact_studio_esp32c3.build.target=esp
|
|
weact_studio_esp32c3.build.mcu=esp32c3
|
|
weact_studio_esp32c3.build.core=esp32
|
|
weact_studio_esp32c3.build.variant=weact_studio_esp32c3
|
|
weact_studio_esp32c3.build.board=WEACT_STUDIO_ESP32C3
|
|
weact_studio_esp32c3.build.bootloader_addr=0x0
|
|
|
|
weact_studio_esp32c3.build.usb_mode=1
|
|
weact_studio_esp32c3.build.cdc_on_boot=1
|
|
weact_studio_esp32c3.build.f_cpu=160000000L
|
|
weact_studio_esp32c3.build.flash_size=4MB
|
|
weact_studio_esp32c3.build.flash_freq=80m
|
|
weact_studio_esp32c3.build.flash_mode=qio
|
|
weact_studio_esp32c3.build.boot=qio
|
|
weact_studio_esp32c3.build.partitions=default
|
|
weact_studio_esp32c3.build.defines=
|
|
|
|
weact_studio_esp32c3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
weact_studio_esp32c3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
weact_studio_esp32c3.menu.USBMode.default=USB-OTG
|
|
weact_studio_esp32c3.menu.USBMode.default.build.usb_mode=0
|
|
|
|
weact_studio_esp32c3.menu.JTAGAdapter.default=Disabled
|
|
weact_studio_esp32c3.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
weact_studio_esp32c3.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
weact_studio_esp32c3.menu.JTAGAdapter.builtin.build.openocdscript=esp32c3-builtin.cfg
|
|
weact_studio_esp32c3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
weact_studio_esp32c3.menu.JTAGAdapter.external=FTDI Adapter
|
|
weact_studio_esp32c3.menu.JTAGAdapter.external.build.openocdscript=esp32c3-ftdi.cfg
|
|
weact_studio_esp32c3.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
weact_studio_esp32c3.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
weact_studio_esp32c3.menu.JTAGAdapter.bridge.build.openocdscript=esp32c3-bridge.cfg
|
|
weact_studio_esp32c3.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
weact_studio_esp32c3.menu.CDCOnBoot.default=Enabled
|
|
weact_studio_esp32c3.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
weact_studio_esp32c3.menu.CDCOnBoot.cdc=Enabled
|
|
weact_studio_esp32c3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
|
|
weact_studio_esp32c3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
weact_studio_esp32c3.menu.PartitionScheme.default.build.partitions=default
|
|
weact_studio_esp32c3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
weact_studio_esp32c3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
weact_studio_esp32c3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
|
|
weact_studio_esp32c3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
weact_studio_esp32c3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
weact_studio_esp32c3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
weact_studio_esp32c3.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
weact_studio_esp32c3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
weact_studio_esp32c3.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
weact_studio_esp32c3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
weact_studio_esp32c3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
weact_studio_esp32c3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
weact_studio_esp32c3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
weact_studio_esp32c3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
weact_studio_esp32c3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
weact_studio_esp32c3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
weact_studio_esp32c3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
weact_studio_esp32c3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
weact_studio_esp32c3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
weact_studio_esp32c3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
weact_studio_esp32c3.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
weact_studio_esp32c3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
|
|
weact_studio_esp32c3.menu.CPUFreq.160=160MHz (WiFi)
|
|
weact_studio_esp32c3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
weact_studio_esp32c3.menu.CPUFreq.80=80MHz (WiFi)
|
|
weact_studio_esp32c3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
weact_studio_esp32c3.menu.CPUFreq.40=40MHz
|
|
weact_studio_esp32c3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
weact_studio_esp32c3.menu.CPUFreq.20=20MHz
|
|
weact_studio_esp32c3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
weact_studio_esp32c3.menu.CPUFreq.10=10MHz
|
|
weact_studio_esp32c3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
weact_studio_esp32c3.menu.FlashMode.qio=QIO
|
|
weact_studio_esp32c3.menu.FlashMode.qio.build.flash_mode=dio
|
|
weact_studio_esp32c3.menu.FlashMode.qio.build.boot=qio
|
|
weact_studio_esp32c3.menu.FlashMode.dio=DIO
|
|
weact_studio_esp32c3.menu.FlashMode.dio.build.flash_mode=dio
|
|
weact_studio_esp32c3.menu.FlashMode.dio.build.boot=dio
|
|
|
|
weact_studio_esp32c3.menu.FlashFreq.80=80MHz
|
|
weact_studio_esp32c3.menu.FlashFreq.80.build.flash_freq=80m
|
|
weact_studio_esp32c3.menu.FlashFreq.40=40MHz
|
|
weact_studio_esp32c3.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
weact_studio_esp32c3.menu.UploadSpeed.921600=921600
|
|
weact_studio_esp32c3.menu.UploadSpeed.921600.upload.speed=921600
|
|
weact_studio_esp32c3.menu.UploadSpeed.115200=115200
|
|
weact_studio_esp32c3.menu.UploadSpeed.115200.upload.speed=115200
|
|
weact_studio_esp32c3.menu.UploadSpeed.256000.windows=256000
|
|
weact_studio_esp32c3.menu.UploadSpeed.256000.upload.speed=256000
|
|
weact_studio_esp32c3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
weact_studio_esp32c3.menu.UploadSpeed.230400=230400
|
|
weact_studio_esp32c3.menu.UploadSpeed.230400.upload.speed=230400
|
|
weact_studio_esp32c3.menu.UploadSpeed.460800.linux=460800
|
|
weact_studio_esp32c3.menu.UploadSpeed.460800.macosx=460800
|
|
weact_studio_esp32c3.menu.UploadSpeed.460800.upload.speed=460800
|
|
weact_studio_esp32c3.menu.UploadSpeed.512000.windows=512000
|
|
weact_studio_esp32c3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
weact_studio_esp32c3.menu.DebugLevel.none=None
|
|
weact_studio_esp32c3.menu.DebugLevel.none.build.code_debug=0
|
|
weact_studio_esp32c3.menu.DebugLevel.error=Error
|
|
weact_studio_esp32c3.menu.DebugLevel.error.build.code_debug=1
|
|
weact_studio_esp32c3.menu.DebugLevel.warn=Warn
|
|
weact_studio_esp32c3.menu.DebugLevel.warn.build.code_debug=2
|
|
weact_studio_esp32c3.menu.DebugLevel.info=Info
|
|
weact_studio_esp32c3.menu.DebugLevel.info.build.code_debug=3
|
|
weact_studio_esp32c3.menu.DebugLevel.debug=Debug
|
|
weact_studio_esp32c3.menu.DebugLevel.debug.build.code_debug=4
|
|
weact_studio_esp32c3.menu.DebugLevel.verbose=Verbose
|
|
weact_studio_esp32c3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
weact_studio_esp32c3.menu.EraseFlash.none=Disabled
|
|
weact_studio_esp32c3.menu.EraseFlash.none.upload.erase_cmd=
|
|
weact_studio_esp32c3.menu.EraseFlash.all=Enabled
|
|
weact_studio_esp32c3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
aslcanx2.name=AutosportLabs ESP-CAN-X2
|
|
|
|
aslcanx2.bootloader.tool=esptool_py
|
|
aslcanx2.bootloader.tool.default=esptool_py
|
|
|
|
aslcanx2.upload.tool=esptool_py
|
|
aslcanx2.upload.tool.default=esptool_py
|
|
aslcanx2.upload.tool.network=esp_ota
|
|
|
|
aslcanx2.upload.maximum_size=1310720
|
|
aslcanx2.upload.maximum_data_size=327680
|
|
aslcanx2.upload.flags=
|
|
aslcanx2.upload.extra_flags=
|
|
aslcanx2.upload.use_1200bps_touch=false
|
|
aslcanx2.upload.wait_for_upload_port=false
|
|
|
|
aslcanx2.serial.disableDTR=false
|
|
aslcanx2.serial.disableRTS=false
|
|
|
|
aslcanx2.build.tarch=xtensa
|
|
aslcanx2.build.bootloader_addr=0x0
|
|
aslcanx2.build.target=esp32s3
|
|
aslcanx2.build.mcu=esp32s3
|
|
aslcanx2.build.core=esp32
|
|
aslcanx2.build.variant=aslcanx2
|
|
aslcanx2.build.board=ASL_CAN_X2
|
|
|
|
aslcanx2.build.usb_mode=1
|
|
aslcanx2.build.cdc_on_boot=0
|
|
aslcanx2.build.msc_on_boot=0
|
|
aslcanx2.build.dfu_on_boot=0
|
|
aslcanx2.build.f_cpu=240000000L
|
|
aslcanx2.build.flash_size=8MB
|
|
aslcanx2.build.flash_freq=80m
|
|
aslcanx2.build.flash_mode=dio
|
|
aslcanx2.build.boot=qio
|
|
aslcanx2.build.boot_freq=80m
|
|
aslcanx2.build.partitions=default_8MB
|
|
aslcanx2.build.defines=
|
|
aslcanx2.build.loop_core=
|
|
aslcanx2.build.event_core=
|
|
aslcanx2.build.psram_type=qspi
|
|
aslcanx2.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
aslcanx2.menu.JTAGAdapter.default=Disabled
|
|
aslcanx2.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
aslcanx2.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
aslcanx2.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
aslcanx2.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
aslcanx2.menu.JTAGAdapter.external=FTDI Adapter
|
|
aslcanx2.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
aslcanx2.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
aslcanx2.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
aslcanx2.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
aslcanx2.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
aslcanx2.menu.PSRAM.disabled=Disabled
|
|
aslcanx2.menu.PSRAM.disabled.build.defines=
|
|
aslcanx2.menu.PSRAM.disabled.build.psram_type=qspi
|
|
aslcanx2.menu.PSRAM.opi=OPI PSRAM
|
|
aslcanx2.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
|
|
aslcanx2.menu.PSRAM.opi.build.psram_type=opi
|
|
|
|
aslcanx2.menu.FlashMode.qio=QIO 80MHz
|
|
aslcanx2.menu.FlashMode.qio.build.flash_mode=dio
|
|
aslcanx2.menu.FlashMode.qio.build.boot=qio
|
|
aslcanx2.menu.FlashMode.qio.build.boot_freq=80m
|
|
aslcanx2.menu.FlashMode.qio.build.flash_freq=80m
|
|
aslcanx2.menu.FlashMode.qio120=QIO 120MHz
|
|
aslcanx2.menu.FlashMode.qio120.build.flash_mode=dio
|
|
aslcanx2.menu.FlashMode.qio120.build.boot=qio
|
|
aslcanx2.menu.FlashMode.qio120.build.boot_freq=120m
|
|
aslcanx2.menu.FlashMode.qio120.build.flash_freq=80m
|
|
aslcanx2.menu.FlashMode.dio=DIO 80MHz
|
|
aslcanx2.menu.FlashMode.dio.build.flash_mode=dio
|
|
aslcanx2.menu.FlashMode.dio.build.boot=dio
|
|
aslcanx2.menu.FlashMode.dio.build.boot_freq=80m
|
|
aslcanx2.menu.FlashMode.dio.build.flash_freq=80m
|
|
aslcanx2.menu.FlashMode.opi=OPI 80MHz
|
|
aslcanx2.menu.FlashMode.opi.build.flash_mode=dout
|
|
aslcanx2.menu.FlashMode.opi.build.boot=opi
|
|
aslcanx2.menu.FlashMode.opi.build.boot_freq=80m
|
|
aslcanx2.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
aslcanx2.menu.LoopCore.1=Core 1
|
|
aslcanx2.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
aslcanx2.menu.LoopCore.0=Core 0
|
|
aslcanx2.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
aslcanx2.menu.EventsCore.1=Core 1
|
|
aslcanx2.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
aslcanx2.menu.EventsCore.0=Core 0
|
|
aslcanx2.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
aslcanx2.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
aslcanx2.menu.USBMode.hwcdc.build.usb_mode=1
|
|
aslcanx2.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
aslcanx2.menu.USBMode.default.build.usb_mode=0
|
|
|
|
aslcanx2.menu.CDCOnBoot.default=Enabled
|
|
aslcanx2.menu.CDCOnBoot.default.build.cdc_on_boot=1
|
|
aslcanx2.menu.CDCOnBoot.cdc=Disabled
|
|
aslcanx2.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
|
|
|
|
aslcanx2.menu.MSCOnBoot.default=Disabled
|
|
aslcanx2.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
aslcanx2.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
aslcanx2.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
aslcanx2.menu.DFUOnBoot.default=Disabled
|
|
aslcanx2.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
aslcanx2.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
aslcanx2.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
aslcanx2.menu.UploadMode.default=UART0 / Hardware CDC
|
|
aslcanx2.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
aslcanx2.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
aslcanx2.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
aslcanx2.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
aslcanx2.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
aslcanx2.menu.PartitionScheme.default=Default with spiffs (3MB APP/1.5MB SPIFFS)
|
|
aslcanx2.menu.PartitionScheme.default.build.partitions=default_8MB
|
|
aslcanx2.menu.PartitionScheme.default.upload.maximum_size=3342336
|
|
aslcanx2.menu.PartitionScheme.defaultffat=Default with ffat (3MB APP/1.5MB FATFS)
|
|
aslcanx2.menu.PartitionScheme.defaultffat.build.partitions=default_8MB_ffat
|
|
aslcanx2.menu.PartitionScheme.defaultffat.upload.maximum_size=3342336
|
|
aslcanx2.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
aslcanx2.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
aslcanx2.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
aslcanx2.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
aslcanx2.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
aslcanx2.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
aslcanx2.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
aslcanx2.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
aslcanx2.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
aslcanx2.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
aslcanx2.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
aslcanx2.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
aslcanx2.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
aslcanx2.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
aslcanx2.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
aslcanx2.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
aslcanx2.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
aslcanx2.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
aslcanx2.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
aslcanx2.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
aslcanx2.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
aslcanx2.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
aslcanx2.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
aslcanx2.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
aslcanx2.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
aslcanx2.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
aslcanx2.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
|
|
aslcanx2.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
|
|
aslcanx2.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
|
|
|
|
aslcanx2.menu.CPUFreq.240=240MHz (WiFi)
|
|
aslcanx2.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
aslcanx2.menu.CPUFreq.160=160MHz (WiFi)
|
|
aslcanx2.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
aslcanx2.menu.CPUFreq.80=80MHz (WiFi)
|
|
aslcanx2.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
aslcanx2.menu.CPUFreq.40=40MHz
|
|
aslcanx2.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
aslcanx2.menu.CPUFreq.20=20MHz
|
|
aslcanx2.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
aslcanx2.menu.CPUFreq.10=10MHz
|
|
aslcanx2.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
aslcanx2.menu.UploadSpeed.921600=921600
|
|
aslcanx2.menu.UploadSpeed.921600.upload.speed=921600
|
|
aslcanx2.menu.UploadSpeed.115200=115200
|
|
aslcanx2.menu.UploadSpeed.115200.upload.speed=115200
|
|
aslcanx2.menu.UploadSpeed.256000.windows=256000
|
|
aslcanx2.menu.UploadSpeed.256000.upload.speed=256000
|
|
aslcanx2.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
aslcanx2.menu.UploadSpeed.230400=230400
|
|
aslcanx2.menu.UploadSpeed.230400.upload.speed=230400
|
|
aslcanx2.menu.UploadSpeed.460800.linux=460800
|
|
aslcanx2.menu.UploadSpeed.460800.macosx=460800
|
|
aslcanx2.menu.UploadSpeed.460800.upload.speed=460800
|
|
aslcanx2.menu.UploadSpeed.512000.windows=512000
|
|
aslcanx2.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
aslcanx2.menu.DebugLevel.none=None
|
|
aslcanx2.menu.DebugLevel.none.build.code_debug=0
|
|
aslcanx2.menu.DebugLevel.error=Error
|
|
aslcanx2.menu.DebugLevel.error.build.code_debug=1
|
|
aslcanx2.menu.DebugLevel.warn=Warn
|
|
aslcanx2.menu.DebugLevel.warn.build.code_debug=2
|
|
aslcanx2.menu.DebugLevel.info=Info
|
|
aslcanx2.menu.DebugLevel.info.build.code_debug=3
|
|
aslcanx2.menu.DebugLevel.debug=Debug
|
|
aslcanx2.menu.DebugLevel.debug.build.code_debug=4
|
|
aslcanx2.menu.DebugLevel.verbose=Verbose
|
|
aslcanx2.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
aslcanx2.menu.EraseFlash.none=Disabled
|
|
aslcanx2.menu.EraseFlash.none.upload.erase_cmd=
|
|
aslcanx2.menu.EraseFlash.all=Enabled
|
|
aslcanx2.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
walter.name=DPTechnics Walter
|
|
|
|
walter.bootloader.tool=esptool_py
|
|
walter.bootloader.tool.default=esptool_py
|
|
|
|
walter.upload.tool=esptool_py
|
|
walter.upload.tool.default=esptool_py
|
|
walter.upload.tool.network=esp_ota
|
|
|
|
walter.upload.maximum_size=1310720
|
|
walter.upload.maximum_data_size=327680
|
|
walter.upload.flags=
|
|
walter.upload.extra_flags=
|
|
walter.upload.use_1200bps_touch=false
|
|
walter.upload.wait_for_upload_port=false
|
|
|
|
walter.serial.disableDTR=false
|
|
walter.serial.disableRTS=false
|
|
|
|
walter.build.tarch=xtensa
|
|
walter.build.bootloader_addr=0x0
|
|
walter.build.target=esp32s3
|
|
walter.build.mcu=esp32s3
|
|
walter.build.core=esp32
|
|
walter.build.variant=walter
|
|
walter.build.board=DPTECHNICS_WALTER
|
|
|
|
walter.build.usb_mode=1
|
|
walter.build.cdc_on_boot=1
|
|
walter.build.msc_on_boot=0
|
|
walter.build.dfu_on_boot=0
|
|
walter.build.f_cpu=240000000L
|
|
walter.build.flash_size=16MB
|
|
walter.build.flash_freq=80m
|
|
walter.build.flash_mode=dio
|
|
walter.build.boot=qio
|
|
walter.build.boot_freq=80m
|
|
walter.build.partitions=default
|
|
walter.build.defines=
|
|
walter.build.loop_core=
|
|
walter.build.event_core=
|
|
walter.build.psram_type=qspi
|
|
walter.build.memory_type={build.boot}_{build.psram_type}
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
walter.menu.JTAGAdapter.default=Disabled
|
|
walter.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
walter.menu.JTAGAdapter.builtin=Integrated USB JTAG
|
|
walter.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
|
|
walter.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
|
|
walter.menu.JTAGAdapter.external=FTDI Adapter
|
|
walter.menu.JTAGAdapter.external.build.openocdscript=esp32s3-ftdi.cfg
|
|
walter.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
walter.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
walter.menu.JTAGAdapter.bridge.build.openocdscript=esp32s3-bridge.cfg
|
|
walter.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
walter.menu.PSRAM.enabled=QSPI PSRAM
|
|
walter.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
walter.menu.PSRAM.enabled.build.psram_type=qspi
|
|
walter.menu.PSRAM.disabled=Disabled
|
|
walter.menu.PSRAM.disabled.build.defines=
|
|
walter.menu.PSRAM.disabled.build.psram_type=qspi
|
|
|
|
walter.menu.FlashMode.qio=QIO 80MHz
|
|
walter.menu.FlashMode.qio.build.flash_mode=dio
|
|
walter.menu.FlashMode.qio.build.boot=qio
|
|
walter.menu.FlashMode.qio.build.boot_freq=80m
|
|
walter.menu.FlashMode.qio.build.flash_freq=80m
|
|
walter.menu.FlashMode.dio=DIO 80MHz
|
|
walter.menu.FlashMode.dio.build.flash_mode=dio
|
|
walter.menu.FlashMode.dio.build.boot=dio
|
|
walter.menu.FlashMode.dio.build.boot_freq=80m
|
|
walter.menu.FlashMode.dio.build.flash_freq=80m
|
|
|
|
walter.menu.FlashSize.16M=16MB (128Mb)
|
|
walter.menu.FlashSize.16M.build.flash_size=16MB
|
|
|
|
walter.menu.LoopCore.1=Core 1
|
|
walter.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
walter.menu.LoopCore.0=Core 0
|
|
walter.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
walter.menu.EventsCore.1=Core 1
|
|
walter.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
walter.menu.EventsCore.0=Core 0
|
|
walter.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
walter.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
walter.menu.USBMode.hwcdc.build.usb_mode=1
|
|
walter.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
walter.menu.USBMode.default.build.usb_mode=0
|
|
|
|
walter.menu.CDCOnBoot.cdc=Enabled
|
|
walter.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
walter.menu.CDCOnBoot.default=Disabled
|
|
walter.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
walter.menu.MSCOnBoot.default=Disabled
|
|
walter.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
walter.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
walter.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
walter.menu.DFUOnBoot.default=Disabled
|
|
walter.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
walter.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
walter.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
walter.menu.UploadMode.default=UART0 / Hardware CDC
|
|
walter.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
walter.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
walter.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
walter.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
walter.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
walter.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
|
|
walter.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
walter.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
walter.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
|
|
walter.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
walter.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
walter.menu.PartitionScheme.default_16MB=Default (6.25MB APP/3.43MB SPIFFS)
|
|
walter.menu.PartitionScheme.default_16MB.build.partitions=default_16MB
|
|
walter.menu.PartitionScheme.default_16MB.upload.maximum_size=6553600
|
|
|
|
walter.menu.CPUFreq.240=240MHz (WiFi)
|
|
walter.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
walter.menu.CPUFreq.160=160MHz (WiFi)
|
|
walter.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
walter.menu.CPUFreq.80=80MHz (WiFi)
|
|
walter.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
walter.menu.CPUFreq.40=40MHz
|
|
walter.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
walter.menu.CPUFreq.20=20MHz
|
|
walter.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
walter.menu.CPUFreq.10=10MHz
|
|
walter.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
walter.menu.UploadSpeed.921600=921600
|
|
walter.menu.UploadSpeed.921600.upload.speed=921600
|
|
walter.menu.UploadSpeed.115200=115200
|
|
walter.menu.UploadSpeed.115200.upload.speed=115200
|
|
walter.menu.UploadSpeed.256000.windows=256000
|
|
walter.menu.UploadSpeed.256000.upload.speed=256000
|
|
walter.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
walter.menu.UploadSpeed.230400=230400
|
|
walter.menu.UploadSpeed.230400.upload.speed=230400
|
|
walter.menu.UploadSpeed.460800.linux=460800
|
|
walter.menu.UploadSpeed.460800.macosx=460800
|
|
walter.menu.UploadSpeed.460800.upload.speed=460800
|
|
walter.menu.UploadSpeed.512000.windows=512000
|
|
walter.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
walter.menu.DebugLevel.none=None
|
|
walter.menu.DebugLevel.none.build.code_debug=0
|
|
walter.menu.DebugLevel.error=Error
|
|
walter.menu.DebugLevel.error.build.code_debug=1
|
|
walter.menu.DebugLevel.warn=Warn
|
|
walter.menu.DebugLevel.warn.build.code_debug=2
|
|
walter.menu.DebugLevel.info=Info
|
|
walter.menu.DebugLevel.info.build.code_debug=3
|
|
walter.menu.DebugLevel.debug=Debug
|
|
walter.menu.DebugLevel.debug.build.code_debug=4
|
|
walter.menu.DebugLevel.verbose=Verbose
|
|
walter.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
walter.menu.EraseFlash.none=Disabled
|
|
walter.menu.EraseFlash.none.upload.erase_cmd=
|
|
walter.menu.EraseFlash.all=Enabled
|
|
walter.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
elecrow_crowpanel_7.name=Elecrow CrowPanel 7.0P
|
|
|
|
elecrow_crowpanel_7.upload.tool=esptool_py
|
|
elecrow_crowpanel_7.upload.tool.default=esptool_py
|
|
elecrow_crowpanel_7.upload.tool.network=esp_ota
|
|
elecrow_crowpanel_7.upload.maximum_size=1310720
|
|
elecrow_crowpanel_7.upload.maximum_data_size=327680
|
|
elecrow_crowpanel_7.upload.wait_for_upload_port=false
|
|
elecrow_crowpanel_7.upload.speed=460800
|
|
elecrow_crowpanel_7.upload.flags=
|
|
elecrow_crowpanel_7.upload.extra_flags=
|
|
|
|
elecrow_crowpanel_7.bootloader.tool=esptool_py
|
|
elecrow_crowpanel_7.bootloader.tool.default=esptool_py
|
|
|
|
elecrow_crowpanel_7.serial.disableDTR=true
|
|
elecrow_crowpanel_7.serial.disableRTS=true
|
|
|
|
elecrow_crowpanel_7.build.tarch=xtensa
|
|
elecrow_crowpanel_7.build.bootloader_addr=0x0
|
|
elecrow_crowpanel_7.build.mcu=esp32s3
|
|
elecrow_crowpanel_7.build.core=esp32
|
|
elecrow_crowpanel_7.build.target=esp32s3
|
|
elecrow_crowpanel_7.build.variant=elecrow_crowpanel_7
|
|
elecrow_crowpanel_7.build.board=ELECROW_CROWPANEL_7
|
|
|
|
elecrow_crowpanel_7.build.usb_mode=1
|
|
elecrow_crowpanel_7.build.cdc_on_boot=1
|
|
elecrow_crowpanel_7.build.msc_on_boot=0
|
|
elecrow_crowpanel_7.build.dfu_on_boot=0
|
|
|
|
elecrow_crowpanel_7.build.f_cpu=240000000L
|
|
elecrow_crowpanel_7.build.flash_size=4MB
|
|
elecrow_crowpanel_7.build.flash_freq=80m
|
|
elecrow_crowpanel_7.build.flash_mode=dio
|
|
elecrow_crowpanel_7.build.boot=dio
|
|
elecrow_crowpanel_7.build.partitions=default
|
|
|
|
elecrow_crowpanel_7.menu.PSRAM.disabled=Disabled
|
|
elecrow_crowpanel_7.menu.PSRAM.disabled.build.defines=
|
|
elecrow_crowpanel_7.menu.PSRAM.enabled=Enabled
|
|
elecrow_crowpanel_7.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
elecrow_crowpanel_7.menu.PSRAM.enabled.build.psram_type=opi
|
|
|
|
elecrow_crowpanel_7.menu.LoopCore.1=Core 1
|
|
elecrow_crowpanel_7.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
elecrow_crowpanel_7.menu.LoopCore.0=Core 0
|
|
elecrow_crowpanel_7.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
elecrow_crowpanel_7.menu.EventsCore.1=Core 1
|
|
elecrow_crowpanel_7.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
elecrow_crowpanel_7.menu.EventsCore.0=Core 0
|
|
elecrow_crowpanel_7.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
elecrow_crowpanel_7.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
elecrow_crowpanel_7.menu.PartitionScheme.default.build.partitions=default
|
|
elecrow_crowpanel_7.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
elecrow_crowpanel_7.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
elecrow_crowpanel_7.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
|
|
elecrow_crowpanel_7.menu.PartitionScheme.minimal.build.partitions=minimal
|
|
elecrow_crowpanel_7.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
elecrow_crowpanel_7.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
elecrow_crowpanel_7.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
elecrow_crowpanel_7.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
elecrow_crowpanel_7.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
elecrow_crowpanel_7.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
elecrow_crowpanel_7.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
elecrow_crowpanel_7.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
elecrow_crowpanel_7.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
elecrow_crowpanel_7.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
elecrow_crowpanel_7.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
elecrow_crowpanel_7.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
elecrow_crowpanel_7.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
elecrow_crowpanel_7.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
elecrow_crowpanel_7.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
elecrow_crowpanel_7.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
elecrow_crowpanel_7.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
elecrow_crowpanel_7.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
|
|
elecrow_crowpanel_7.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
elecrow_crowpanel_7.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
elecrow_crowpanel_7.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
elecrow_crowpanel_7.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
elecrow_crowpanel_7.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
elecrow_crowpanel_7.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
elecrow_crowpanel_7.menu.CPUFreq.40=40MHz (40MHz XTAL)
|
|
elecrow_crowpanel_7.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
elecrow_crowpanel_7.menu.CPUFreq.26=26MHz (26MHz XTAL)
|
|
elecrow_crowpanel_7.menu.CPUFreq.26.build.f_cpu=26000000L
|
|
elecrow_crowpanel_7.menu.CPUFreq.20=20MHz (40MHz XTAL)
|
|
elecrow_crowpanel_7.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
elecrow_crowpanel_7.menu.CPUFreq.13=13MHz (26MHz XTAL)
|
|
elecrow_crowpanel_7.menu.CPUFreq.13.build.f_cpu=13000000L
|
|
elecrow_crowpanel_7.menu.CPUFreq.10=10MHz (40MHz XTAL)
|
|
elecrow_crowpanel_7.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
elecrow_crowpanel_7.menu.FlashMode.qio=QIO
|
|
elecrow_crowpanel_7.menu.FlashMode.qio.build.flash_mode=dio
|
|
elecrow_crowpanel_7.menu.FlashMode.qio.build.boot=qio
|
|
elecrow_crowpanel_7.menu.FlashMode.dio=DIO
|
|
elecrow_crowpanel_7.menu.FlashMode.dio.build.flash_mode=dio
|
|
elecrow_crowpanel_7.menu.FlashMode.dio.build.boot=dio
|
|
|
|
elecrow_crowpanel_7.menu.FlashFreq.80=80MHz
|
|
elecrow_crowpanel_7.menu.FlashFreq.80.build.flash_freq=80m
|
|
elecrow_crowpanel_7.menu.FlashFreq.40=40MHz
|
|
elecrow_crowpanel_7.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
elecrow_crowpanel_7.menu.FlashSize.4MB=4MB (32Mb)
|
|
elecrow_crowpanel_7.menu.FlashSize.4MB.build.flash_size=4MB
|
|
|
|
elecrow_crowpanel_7.menu.UploadSpeed.921600=921600
|
|
elecrow_crowpanel_7.menu.UploadSpeed.921600.upload.speed=921600
|
|
elecrow_crowpanel_7.menu.UploadSpeed.115200=115200
|
|
elecrow_crowpanel_7.menu.UploadSpeed.115200.upload.speed=115200
|
|
elecrow_crowpanel_7.menu.UploadSpeed.256000.windows=256000
|
|
elecrow_crowpanel_7.menu.UploadSpeed.256000.upload.speed=256000
|
|
elecrow_crowpanel_7.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
elecrow_crowpanel_7.menu.UploadSpeed.230400=230400
|
|
elecrow_crowpanel_7.menu.UploadSpeed.230400.upload.speed=230400
|
|
elecrow_crowpanel_7.menu.UploadSpeed.460800.linux=460800
|
|
elecrow_crowpanel_7.menu.UploadSpeed.460800.macosx=460800
|
|
elecrow_crowpanel_7.menu.UploadSpeed.460800.upload.speed=460800
|
|
elecrow_crowpanel_7.menu.UploadSpeed.512000.windows=512000
|
|
elecrow_crowpanel_7.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
elecrow_crowpanel_7.menu.DebugLevel.none=None
|
|
elecrow_crowpanel_7.menu.DebugLevel.none.build.code_debug=0
|
|
elecrow_crowpanel_7.menu.DebugLevel.error=Error
|
|
elecrow_crowpanel_7.menu.DebugLevel.error.build.code_debug=1
|
|
elecrow_crowpanel_7.menu.DebugLevel.warn=Warn
|
|
elecrow_crowpanel_7.menu.DebugLevel.warn.build.code_debug=2
|
|
elecrow_crowpanel_7.menu.DebugLevel.info=Info
|
|
elecrow_crowpanel_7.menu.DebugLevel.info.build.code_debug=3
|
|
elecrow_crowpanel_7.menu.DebugLevel.debug=Debug
|
|
elecrow_crowpanel_7.menu.DebugLevel.debug.build.code_debug=4
|
|
elecrow_crowpanel_7.menu.DebugLevel.verbose=Verbose
|
|
elecrow_crowpanel_7.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
elecrow_crowpanel_7.menu.EraseFlash.none=Disabled
|
|
elecrow_crowpanel_7.menu.EraseFlash.none.upload.erase_cmd=
|
|
elecrow_crowpanel_7.menu.EraseFlash.all=Enabled
|
|
elecrow_crowpanel_7.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
circuitart_zero_s3.name=CircuitART Zero S3
|
|
circuitart_zero_s3.vid.0=0x303a
|
|
circuitart_zero_s3.pid.0=0x80DB
|
|
|
|
circuitart_zero_s3.bootloader.tool=esptool_py
|
|
circuitart_zero_s3.bootloader.tool.default=esptool_py
|
|
|
|
circuitart_zero_s3.upload.tool=esptool_py
|
|
circuitart_zero_s3.upload.tool.default=esptool_py
|
|
circuitart_zero_s3.upload.tool.network=esp_ota
|
|
|
|
circuitart_zero_s3.upload.maximum_size=1310720
|
|
circuitart_zero_s3.upload.maximum_data_size=327680
|
|
circuitart_zero_s3.upload.flags=
|
|
circuitart_zero_s3.upload.extra_flags=
|
|
circuitart_zero_s3.upload.use_1200bps_touch=false
|
|
circuitart_zero_s3.upload.wait_for_upload_port=false
|
|
|
|
circuitart_zero_s3.serial.disableDTR=false
|
|
circuitart_zero_s3.serial.disableRTS=false
|
|
|
|
circuitart_zero_s3.build.tarch=xtensa
|
|
circuitart_zero_s3.build.bootloader_addr=0x0
|
|
circuitart_zero_s3.build.target=esp32s3
|
|
circuitart_zero_s3.build.mcu=esp32s3
|
|
circuitart_zero_s3.build.core=esp32
|
|
circuitart_zero_s3.build.variant=circuitart_zero_s3
|
|
circuitart_zero_s3.build.board=CIRCUITART_ZERO_S3
|
|
|
|
circuitart_zero_s3.build.usb_mode=1
|
|
circuitart_zero_s3.build.cdc_on_boot=0
|
|
circuitart_zero_s3.build.msc_on_boot=0
|
|
circuitart_zero_s3.build.dfu_on_boot=0
|
|
circuitart_zero_s3.build.f_cpu=240000000L
|
|
circuitart_zero_s3.build.flash_size=16MB
|
|
circuitart_zero_s3.build.flash_freq=80m
|
|
circuitart_zero_s3.build.flash_mode=dio
|
|
circuitart_zero_s3.build.boot=qio
|
|
circuitart_zero_s3.build.partitions=default
|
|
circuitart_zero_s3.build.defines=
|
|
circuitart_zero_s3.build.loop_core=
|
|
circuitart_zero_s3.build.event_core=
|
|
circuitart_zero_s3.build.flash_type=qio
|
|
circuitart_zero_s3.build.psram_type=qspi
|
|
circuitart_zero_s3.build.memory_type=qio_qspi
|
|
|
|
circuitart_zero_s3.menu.LoopCore.1=Core 1
|
|
circuitart_zero_s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
circuitart_zero_s3.menu.LoopCore.0=Core 0
|
|
circuitart_zero_s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
circuitart_zero_s3.menu.EventsCore.1=Core 1
|
|
circuitart_zero_s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
circuitart_zero_s3.menu.EventsCore.0=Core 0
|
|
circuitart_zero_s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
circuitart_zero_s3.menu.USBMode.default=USB-OTG (TinyUSB)
|
|
circuitart_zero_s3.menu.USBMode.default.build.usb_mode=0
|
|
circuitart_zero_s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
|
|
circuitart_zero_s3.menu.USBMode.hwcdc.build.usb_mode=1
|
|
|
|
circuitart_zero_s3.menu.CDCOnBoot.cdc=Enabled
|
|
circuitart_zero_s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
circuitart_zero_s3.menu.CDCOnBoot.default=Disabled
|
|
circuitart_zero_s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
circuitart_zero_s3.menu.MSCOnBoot.default=Disabled
|
|
circuitart_zero_s3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
circuitart_zero_s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
circuitart_zero_s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
circuitart_zero_s3.menu.DFUOnBoot.default=Disabled
|
|
circuitart_zero_s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
circuitart_zero_s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
circuitart_zero_s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
circuitart_zero_s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
circuitart_zero_s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
circuitart_zero_s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
circuitart_zero_s3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
circuitart_zero_s3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
circuitart_zero_s3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
|
|
circuitart_zero_s3.menu.PSRAM.enabled=Enabled
|
|
circuitart_zero_s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
|
|
circuitart_zero_s3.menu.PSRAM.disabled=Disabled
|
|
circuitart_zero_s3.menu.PSRAM.disabled.build.defines=
|
|
|
|
circuitart_zero_s3.menu.PartitionScheme.default_16MB=Default (6.25MB APP/3.43MB SPIFFS)
|
|
circuitart_zero_s3.menu.PartitionScheme.default_16MB.build.partitions=default_16MB
|
|
circuitart_zero_s3.menu.PartitionScheme.default_16MB.upload.maximum_size=6553600
|
|
circuitart_zero_s3.menu.PartitionScheme.tinyuf2=TinyUF2 Compatibility (2MB APP/12MB FFAT)
|
|
circuitart_zero_s3.menu.PartitionScheme.tinyuf2.build.custom_bootloader=bootloader_tinyuf2
|
|
circuitart_zero_s3.menu.PartitionScheme.tinyuf2.build.custom_partitions=partitions_tinyuf2
|
|
circuitart_zero_s3.menu.PartitionScheme.tinyuf2.upload.extra_flags=0x410000 "{runtime.platform.path}/variants/{build.variant}/tinyuf2.bin"
|
|
circuitart_zero_s3.menu.PartitionScheme.tinyuf2.upload.maximum_size=2097152
|
|
circuitart_zero_s3.menu.PartitionScheme.large_spiffs=Large SPIFFS (4.5MB APP/6.93MB SPIFFS)
|
|
circuitart_zero_s3.menu.PartitionScheme.large_spiffs.build.partitions=large_spiffs_16MB
|
|
circuitart_zero_s3.menu.PartitionScheme.large_spiffs.upload.maximum_size=4718592
|
|
circuitart_zero_s3.menu.PartitionScheme.app3M_fat9M_16MB=FFAT (3MB APP/9MB FATFS)
|
|
circuitart_zero_s3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
|
|
circuitart_zero_s3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
|
|
circuitart_zero_s3.menu.PartitionScheme.fatflash=Large FFAT (2MB APP/12.5MB FATFS)
|
|
circuitart_zero_s3.menu.PartitionScheme.fatflash.build.partitions=ffat
|
|
circuitart_zero_s3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
|
|
|
|
circuitart_zero_s3.menu.CPUFreq.240=240MHz (WiFi)
|
|
circuitart_zero_s3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
circuitart_zero_s3.menu.CPUFreq.160=160MHz (WiFi)
|
|
circuitart_zero_s3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
circuitart_zero_s3.menu.CPUFreq.80=80MHz (WiFi)
|
|
circuitart_zero_s3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
circuitart_zero_s3.menu.CPUFreq.40=40MHz
|
|
circuitart_zero_s3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
circuitart_zero_s3.menu.CPUFreq.20=20MHz
|
|
circuitart_zero_s3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
circuitart_zero_s3.menu.CPUFreq.10=10MHz
|
|
circuitart_zero_s3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
circuitart_zero_s3.menu.FlashMode.qio=QIO
|
|
circuitart_zero_s3.menu.FlashMode.qio.build.flash_mode=dio
|
|
circuitart_zero_s3.menu.FlashMode.qio.build.boot=qio
|
|
circuitart_zero_s3.menu.FlashMode.dio=DIO
|
|
circuitart_zero_s3.menu.FlashMode.dio.build.flash_mode=dio
|
|
circuitart_zero_s3.menu.FlashMode.dio.build.boot=dio
|
|
|
|
circuitart_zero_s3.menu.UploadSpeed.921600=921600
|
|
circuitart_zero_s3.menu.UploadSpeed.921600.upload.speed=921600
|
|
circuitart_zero_s3.menu.UploadSpeed.115200=115200
|
|
circuitart_zero_s3.menu.UploadSpeed.115200.upload.speed=115200
|
|
circuitart_zero_s3.menu.UploadSpeed.256000.windows=256000
|
|
circuitart_zero_s3.menu.UploadSpeed.256000.upload.speed=256000
|
|
circuitart_zero_s3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
circuitart_zero_s3.menu.UploadSpeed.230400=230400
|
|
circuitart_zero_s3.menu.UploadSpeed.230400.upload.speed=230400
|
|
circuitart_zero_s3.menu.UploadSpeed.460800.linux=460800
|
|
circuitart_zero_s3.menu.UploadSpeed.460800.macosx=460800
|
|
circuitart_zero_s3.menu.UploadSpeed.460800.upload.speed=460800
|
|
circuitart_zero_s3.menu.UploadSpeed.512000.windows=512000
|
|
circuitart_zero_s3.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
circuitart_zero_s3.menu.DebugLevel.none=None
|
|
circuitart_zero_s3.menu.DebugLevel.none.build.code_debug=0
|
|
circuitart_zero_s3.menu.DebugLevel.error=Error
|
|
circuitart_zero_s3.menu.DebugLevel.error.build.code_debug=1
|
|
circuitart_zero_s3.menu.DebugLevel.warn=Warn
|
|
circuitart_zero_s3.menu.DebugLevel.warn.build.code_debug=2
|
|
circuitart_zero_s3.menu.DebugLevel.info=Info
|
|
circuitart_zero_s3.menu.DebugLevel.info.build.code_debug=3
|
|
circuitart_zero_s3.menu.DebugLevel.debug=Debug
|
|
circuitart_zero_s3.menu.DebugLevel.debug.build.code_debug=4
|
|
circuitart_zero_s3.menu.DebugLevel.verbose=Verbose
|
|
circuitart_zero_s3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
circuitart_zero_s3.menu.EraseFlash.none=Disabled
|
|
circuitart_zero_s3.menu.EraseFlash.none.upload.erase_cmd=
|
|
circuitart_zero_s3.menu.EraseFlash.all=Enabled
|
|
circuitart_zero_s3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
# Alfredo NoU3
|
|
|
|
alfredo-nou3.name=Alfredo NoU3
|
|
alfredo-nou3.vid.0=0xAFD0
|
|
alfredo-nou3.pid.0=0x0003
|
|
alfredo-nou3.upload_port.0.vid=0xAFD0
|
|
alfredo-nou3.upload_port.0.pid=0x0003
|
|
|
|
alfredo-nou3.bootloader.tool=esptool_py
|
|
alfredo-nou3.bootloader.tool.default=esptool_py
|
|
|
|
alfredo-nou3.upload.tool=esptool_py
|
|
alfredo-nou3.upload.tool.default=esptool_py
|
|
alfredo-nou3.upload.tool.network=esp_ota
|
|
|
|
alfredo-nou3.upload.maximum_size=3342336
|
|
alfredo-nou3.upload.maximum_data_size=327680
|
|
alfredo-nou3.upload.flags=
|
|
alfredo-nou3.upload.extra_flags=
|
|
alfredo-nou3.upload.use_1200bps_touch=false
|
|
alfredo-nou3.upload.wait_for_upload_port=false
|
|
|
|
alfredo-nou3.serial.disableDTR=false
|
|
alfredo-nou3.serial.disableRTS=false
|
|
|
|
alfredo-nou3.build.tarch=xtensa
|
|
alfredo-nou3.build.bootloader_addr=0x0
|
|
alfredo-nou3.build.target=esp32s3
|
|
alfredo-nou3.build.mcu=esp32s3
|
|
alfredo-nou3.build.core=esp32
|
|
alfredo-nou3.build.variant=alfredo-nou3
|
|
alfredo-nou3.build.board=ALFREDO_NOU3
|
|
|
|
alfredo-nou3.build.usb_mode=1
|
|
alfredo-nou3.build.cdc_on_boot=1
|
|
alfredo-nou3.build.msc_on_boot=0
|
|
alfredo-nou3.build.dfu_on_boot=0
|
|
alfredo-nou3.build.f_cpu=240000000L
|
|
alfredo-nou3.build.flash_size=8MB
|
|
alfredo-nou3.build.flash_freq=80m
|
|
alfredo-nou3.build.flash_mode=dio
|
|
alfredo-nou3.build.boot=qio
|
|
alfredo-nou3.build.partitions=default
|
|
alfredo-nou3.build.defines=
|
|
alfredo-nou3.build.loop_core=
|
|
alfredo-nou3.build.event_core=
|
|
alfredo-nou3.build.flash_type=qio
|
|
alfredo-nou3.build.psram_type=qspi
|
|
alfredo-nou3.build.memory_type={build.flash_type}_{build.psram_type}
|
|
|
|
alfredo-nou3.menu.LoopCore.1=Core 1
|
|
alfredo-nou3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
alfredo-nou3.menu.LoopCore.0=Core 0
|
|
alfredo-nou3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
alfredo-nou3.menu.EventsCore.1=Core 1
|
|
alfredo-nou3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
alfredo-nou3.menu.EventsCore.0=Core 0
|
|
alfredo-nou3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
alfredo-nou3.menu.USBMode.default=Hardware CDC and JTAG
|
|
alfredo-nou3.menu.USBMode.default.build.usb_mode=1
|
|
alfredo-nou3.menu.USBMode.usbotg=USB-OTG (TinyUSB)
|
|
alfredo-nou3.menu.USBMode.usbotg.build.usb_mode=0
|
|
|
|
alfredo-nou3.menu.CDCOnBoot.cdc=Enabled
|
|
alfredo-nou3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
|
|
alfredo-nou3.menu.CDCOnBoot.default=Disabled
|
|
alfredo-nou3.menu.CDCOnBoot.default.build.cdc_on_boot=0
|
|
|
|
alfredo-nou3.menu.MSCOnBoot.default=Disabled
|
|
alfredo-nou3.menu.MSCOnBoot.default.build.msc_on_boot=0
|
|
alfredo-nou3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
|
|
alfredo-nou3.menu.MSCOnBoot.msc.build.msc_on_boot=1
|
|
|
|
alfredo-nou3.menu.DFUOnBoot.default=Disabled
|
|
alfredo-nou3.menu.DFUOnBoot.default.build.dfu_on_boot=0
|
|
alfredo-nou3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
|
|
alfredo-nou3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
|
|
|
|
alfredo-nou3.menu.UploadMode.default=UART0 / Hardware CDC
|
|
alfredo-nou3.menu.UploadMode.default.upload.use_1200bps_touch=false
|
|
alfredo-nou3.menu.UploadMode.default.upload.wait_for_upload_port=false
|
|
alfredo-nou3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
|
|
alfredo-nou3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
|
|
alfredo-nou3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
|
|
|
|
alfredo-nou3.menu.PartitionScheme.default_8MB=Default (3MB APP/1.5MB SPIFFS)
|
|
alfredo-nou3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
|
|
alfredo-nou3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
|
|
alfredo-nou3.menu.PartitionScheme.big_8MB=Max App (8MB APP)
|
|
alfredo-nou3.menu.PartitionScheme.big_8MB.build.partitions=max_app_8MB
|
|
alfredo-nou3.menu.PartitionScheme.big_8MB.upload.maximum_size=8257536
|
|
|
|
alfredo-nou3.menu.CPUFreq.240=240MHz (WiFi)
|
|
alfredo-nou3.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
alfredo-nou3.menu.CPUFreq.160=160MHz (WiFi)
|
|
alfredo-nou3.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
alfredo-nou3.menu.CPUFreq.80=80MHz (WiFi)
|
|
alfredo-nou3.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
alfredo-nou3.menu.CPUFreq.40=40MHz
|
|
alfredo-nou3.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
alfredo-nou3.menu.CPUFreq.20=20MHz
|
|
alfredo-nou3.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
alfredo-nou3.menu.CPUFreq.10=10MHz
|
|
alfredo-nou3.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
alfredo-nou3.menu.FlashMode.qio=QIO 80MHz
|
|
alfredo-nou3.menu.FlashMode.qio.build.flash_mode=dio
|
|
alfredo-nou3.menu.FlashMode.qio.build.boot=qio
|
|
alfredo-nou3.menu.FlashMode.qio.build.boot_freq=80m
|
|
alfredo-nou3.menu.FlashMode.qio.build.flash_freq=80m
|
|
alfredo-nou3.menu.FlashMode.qio120=QIO 120MHz
|
|
alfredo-nou3.menu.FlashMode.qio120.build.flash_mode=dio
|
|
alfredo-nou3.menu.FlashMode.qio120.build.boot=qio
|
|
alfredo-nou3.menu.FlashMode.qio120.build.boot_freq=120m
|
|
alfredo-nou3.menu.FlashMode.qio120.build.flash_freq=80m
|
|
alfredo-nou3.menu.FlashMode.dio=DIO 80MHz
|
|
alfredo-nou3.menu.FlashMode.dio.build.flash_mode=dio
|
|
alfredo-nou3.menu.FlashMode.dio.build.boot=dio
|
|
alfredo-nou3.menu.FlashMode.dio.build.boot_freq=80m
|
|
alfredo-nou3.menu.FlashMode.dio.build.flash_freq=80m
|
|
alfredo-nou3.menu.FlashMode.opi=OPI 80MHz
|
|
alfredo-nou3.menu.FlashMode.opi.build.flash_mode=dout
|
|
alfredo-nou3.menu.FlashMode.opi.build.boot=opi
|
|
alfredo-nou3.menu.FlashMode.opi.build.boot_freq=80m
|
|
alfredo-nou3.menu.FlashMode.opi.build.flash_freq=80m
|
|
|
|
alfredo-nou3.menu.FlashSize.8M=8MB (64Mb)
|
|
alfredo-nou3.menu.FlashSize.8M.build.flash_size=8MB
|
|
|
|
alfredo-nou3.menu.UploadSpeed.921600=921600
|
|
alfredo-nou3.menu.UploadSpeed.921600.upload.speed=921600
|
|
alfredo-nou3.menu.UploadSpeed.512000.windows=512000
|
|
alfredo-nou3.menu.UploadSpeed.512000.upload.speed=512000
|
|
alfredo-nou3.menu.UploadSpeed.460800.linux=460800
|
|
alfredo-nou3.menu.UploadSpeed.460800.macosx=460800
|
|
alfredo-nou3.menu.UploadSpeed.460800.upload.speed=460800
|
|
alfredo-nou3.menu.UploadSpeed.256000.windows=256000
|
|
alfredo-nou3.menu.UploadSpeed.256000.upload.speed=256000
|
|
alfredo-nou3.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
alfredo-nou3.menu.UploadSpeed.230400=230400
|
|
alfredo-nou3.menu.UploadSpeed.230400.upload.speed=230400
|
|
alfredo-nou3.menu.UploadSpeed.115200=115200
|
|
alfredo-nou3.menu.UploadSpeed.115200.upload.speed=115200
|
|
|
|
alfredo-nou3.menu.DebugLevel.none=None
|
|
alfredo-nou3.menu.DebugLevel.none.build.code_debug=0
|
|
alfredo-nou3.menu.DebugLevel.error=Error
|
|
alfredo-nou3.menu.DebugLevel.error.build.code_debug=1
|
|
alfredo-nou3.menu.DebugLevel.warn=Warn
|
|
alfredo-nou3.menu.DebugLevel.warn.build.code_debug=2
|
|
alfredo-nou3.menu.DebugLevel.info=Info
|
|
alfredo-nou3.menu.DebugLevel.info.build.code_debug=3
|
|
alfredo-nou3.menu.DebugLevel.debug=Debug
|
|
alfredo-nou3.menu.DebugLevel.debug.build.code_debug=4
|
|
alfredo-nou3.menu.DebugLevel.verbose=Verbose
|
|
alfredo-nou3.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
alfredo-nou3.menu.EraseFlash.none=Disabled
|
|
alfredo-nou3.menu.EraseFlash.none.upload.erase_cmd=
|
|
alfredo-nou3.menu.EraseFlash.all=Enabled
|
|
alfredo-nou3.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
codecell.name=CodeCell
|
|
codecell.vid.0=0x303a
|
|
codecell.pid.0=0x1002
|
|
codecell.upload_port.0.vid=0x303a
|
|
codecell.upload_port.0.pid=0x1002
|
|
|
|
codecell.bootloader.tool=esptool_py
|
|
codecell.upload.tool=esptool_py
|
|
codecell.upload.maximum_size=4194304
|
|
codecell.upload.maximum_data_size=327680
|
|
codecell.upload.use_1200bps_touch=false
|
|
codecell.upload.wait_for_upload_port=false
|
|
|
|
codecell.upload.speed=921600
|
|
codecell.serial.disableDTR=false
|
|
codecell.serial.disableRTS=false
|
|
|
|
codecell.build.tarch=riscv32
|
|
codecell.build.target=esp
|
|
codecell.build.mcu=esp32c3
|
|
codecell.build.core=esp32
|
|
codecell.build.variant=codecell
|
|
codecell.build.board=ESP32C3_DEV
|
|
codecell.build.bootloader_addr=0x0
|
|
codecell.build.cdc_on_boot=1
|
|
codecell.build.f_cpu=160000000L
|
|
codecell.build.flash_size=4MB
|
|
codecell.build.flash_freq=80m
|
|
codecell.build.flash_mode=qio
|
|
codecell.build.boot=qio
|
|
codecell.build.partitions=default
|
|
|
|
codecell.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
codecell.menu.CPUFreq.160=160MHz
|
|
codecell.menu.FlashMode.qio=QIO
|
|
codecell.menu.FlashFreq.80=80MHz
|
|
codecell.menu.FlashSize.4M=4MB (32Mb)
|
|
codecell.menu.UploadSpeed.921600=921600
|
|
|
|
codecell.menu.DebugLevel.none=None
|
|
codecell.menu.DebugLevel.none.build.code_debug=0
|
|
codecell.menu.DebugLevel.error=Error
|
|
codecell.menu.DebugLevel.error.build.code_debug=1
|
|
codecell.menu.DebugLevel.warn=Warn
|
|
codecell.menu.DebugLevel.warn.build.code_debug=2
|
|
codecell.menu.DebugLevel.info=Info
|
|
codecell.menu.DebugLevel.info.build.code_debug=3
|
|
codecell.menu.DebugLevel.debug=Debug
|
|
codecell.menu.DebugLevel.debug.build.code_debug=4
|
|
codecell.menu.DebugLevel.verbose=Verbose
|
|
codecell.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
codecell.menu.EraseFlash.none=Disabled
|
|
codecell.menu.EraseFlash.none.upload.erase_cmd=
|
|
codecell.menu.EraseFlash.all=Enabled
|
|
codecell.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
##############################################################
|
|
|
|
jczn_2432s028r.name=ESP32-2432S028R CYD
|
|
|
|
jczn_2432s028r.bootloader.tool=esptool_py
|
|
jczn_2432s028r.bootloader.tool.default=esptool_py
|
|
|
|
jczn_2432s028r.upload.tool=esptool_py
|
|
jczn_2432s028r.upload.tool.default=esptool_py
|
|
jczn_2432s028r.upload.tool.network=esp_ota
|
|
|
|
jczn_2432s028r.upload.maximum_size=1310720
|
|
jczn_2432s028r.upload.maximum_data_size=327680
|
|
jczn_2432s028r.upload.flags=
|
|
jczn_2432s028r.upload.extra_flags=
|
|
|
|
jczn_2432s028r.serial.disableDTR=true
|
|
jczn_2432s028r.serial.disableRTS=true
|
|
|
|
jczn_2432s028r.build.tarch=xtensa
|
|
jczn_2432s028r.build.bootloader_addr=0x1000
|
|
jczn_2432s028r.build.target=esp32
|
|
jczn_2432s028r.build.mcu=esp32
|
|
jczn_2432s028r.build.core=esp32
|
|
jczn_2432s028r.build.variant=jczn_2432s028r
|
|
jczn_2432s028r.build.board=ESP32_2432S028R
|
|
|
|
jczn_2432s028r.build.f_cpu=240000000L
|
|
jczn_2432s028r.build.flash_size=4MB
|
|
jczn_2432s028r.build.flash_freq=40m
|
|
jczn_2432s028r.build.flash_mode=dio
|
|
jczn_2432s028r.build.boot=dio
|
|
jczn_2432s028r.build.partitions=default
|
|
jczn_2432s028r.build.defines=
|
|
jczn_2432s028r.build.loop_core=
|
|
jczn_2432s028r.build.event_core=
|
|
|
|
## IDE 2.0 Seems to not update the value
|
|
jczn_2432s028r.menu.JTAGAdapter.default=Disabled
|
|
jczn_2432s028r.menu.JTAGAdapter.default.build.copy_jtag_files=0
|
|
jczn_2432s028r.menu.JTAGAdapter.external=FTDI Adapter
|
|
jczn_2432s028r.menu.JTAGAdapter.external.build.openocdscript=esp32-wrover-kit-3.3v.cfg
|
|
jczn_2432s028r.menu.JTAGAdapter.external.build.copy_jtag_files=1
|
|
jczn_2432s028r.menu.JTAGAdapter.bridge=ESP USB Bridge
|
|
jczn_2432s028r.menu.JTAGAdapter.bridge.build.openocdscript=esp32-bridge.cfg
|
|
jczn_2432s028r.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
|
|
|
|
jczn_2432s028r.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
|
|
jczn_2432s028r.menu.PartitionScheme.default.build.partitions=default
|
|
jczn_2432s028r.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
|
|
jczn_2432s028r.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
|
|
jczn_2432s028r.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
|
|
jczn_2432s028r.menu.PartitionScheme.no_ota.build.partitions=no_ota
|
|
jczn_2432s028r.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
|
|
jczn_2432s028r.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
|
|
jczn_2432s028r.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
|
|
jczn_2432s028r.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
|
|
jczn_2432s028r.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
|
|
jczn_2432s028r.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
|
|
jczn_2432s028r.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
|
|
jczn_2432s028r.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
|
|
jczn_2432s028r.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
|
|
jczn_2432s028r.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
|
|
jczn_2432s028r.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
|
|
jczn_2432s028r.menu.PartitionScheme.huge_app.build.partitions=huge_app
|
|
jczn_2432s028r.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
|
|
jczn_2432s028r.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
|
|
jczn_2432s028r.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
|
|
jczn_2432s028r.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
|
|
jczn_2432s028r.menu.PartitionScheme.rainmaker=RainMaker 4MB
|
|
jczn_2432s028r.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
|
|
jczn_2432s028r.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
|
|
jczn_2432s028r.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
|
|
jczn_2432s028r.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
|
|
jczn_2432s028r.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
|
|
jczn_2432s028r.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
|
|
jczn_2432s028r.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
|
|
jczn_2432s028r.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
|
|
|
|
jczn_2432s028r.menu.PartitionScheme.otanofs=OTA no FS (2MB APP with OTA)
|
|
jczn_2432s028r.menu.PartitionScheme.otanofs.build.custom_partitions=partitions_otanofs_4MB
|
|
jczn_2432s028r.menu.PartitionScheme.otanofs.upload.maximum_size=2031616
|
|
jczn_2432s028r.menu.PartitionScheme.all_app=Max APP (4MB APP no OTA)
|
|
jczn_2432s028r.menu.PartitionScheme.all_app.build.custom_partitions=partitions_all_app_4MB
|
|
jczn_2432s028r.menu.PartitionScheme.all_app.upload.maximum_size=4128768
|
|
|
|
jczn_2432s028r.menu.PartitionScheme.custom=Custom
|
|
jczn_2432s028r.menu.PartitionScheme.custom.build.partitions=
|
|
jczn_2432s028r.menu.PartitionScheme.custom.upload.maximum_size=4128768
|
|
|
|
jczn_2432s028r.menu.CPUFreq.240=240MHz (WiFi/BT)
|
|
jczn_2432s028r.menu.CPUFreq.240.build.f_cpu=240000000L
|
|
jczn_2432s028r.menu.CPUFreq.160=160MHz (WiFi/BT)
|
|
jczn_2432s028r.menu.CPUFreq.160.build.f_cpu=160000000L
|
|
jczn_2432s028r.menu.CPUFreq.80=80MHz (WiFi/BT)
|
|
jczn_2432s028r.menu.CPUFreq.80.build.f_cpu=80000000L
|
|
jczn_2432s028r.menu.CPUFreq.40=40MHz
|
|
jczn_2432s028r.menu.CPUFreq.40.build.f_cpu=40000000L
|
|
jczn_2432s028r.menu.CPUFreq.20=20MHz
|
|
jczn_2432s028r.menu.CPUFreq.20.build.f_cpu=20000000L
|
|
jczn_2432s028r.menu.CPUFreq.10=10MHz
|
|
jczn_2432s028r.menu.CPUFreq.10.build.f_cpu=10000000L
|
|
|
|
jczn_2432s028r.menu.FlashMode.qio=QIO
|
|
jczn_2432s028r.menu.FlashMode.qio.build.flash_mode=dio
|
|
jczn_2432s028r.menu.FlashMode.qio.build.boot=qio
|
|
|
|
jczn_2432s028r.menu.FlashFreq.80=80MHz
|
|
jczn_2432s028r.menu.FlashFreq.80.build.flash_freq=80m
|
|
jczn_2432s028r.menu.FlashFreq.40=40MHz
|
|
jczn_2432s028r.menu.FlashFreq.40.build.flash_freq=40m
|
|
|
|
jczn_2432s028r.menu.FlashSize.4M=4MB
|
|
jczn_2432s028r.menu.FlashSize.4M.build.flash_size=4MB
|
|
|
|
jczn_2432s028r.menu.UploadSpeed.921600=921600
|
|
jczn_2432s028r.menu.UploadSpeed.921600.upload.speed=921600
|
|
jczn_2432s028r.menu.UploadSpeed.115200=115200
|
|
jczn_2432s028r.menu.UploadSpeed.115200.upload.speed=115200
|
|
jczn_2432s028r.menu.UploadSpeed.256000.windows=256000
|
|
jczn_2432s028r.menu.UploadSpeed.256000.upload.speed=256000
|
|
jczn_2432s028r.menu.UploadSpeed.230400.windows.upload.speed=256000
|
|
jczn_2432s028r.menu.UploadSpeed.230400=230400
|
|
jczn_2432s028r.menu.UploadSpeed.230400.upload.speed=230400
|
|
jczn_2432s028r.menu.UploadSpeed.460800.linux=460800
|
|
jczn_2432s028r.menu.UploadSpeed.460800.macosx=460800
|
|
jczn_2432s028r.menu.UploadSpeed.460800.upload.speed=460800
|
|
jczn_2432s028r.menu.UploadSpeed.512000.windows=512000
|
|
jczn_2432s028r.menu.UploadSpeed.512000.upload.speed=512000
|
|
|
|
jczn_2432s028r.menu.LoopCore.1=Core 1
|
|
jczn_2432s028r.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
|
|
jczn_2432s028r.menu.LoopCore.0=Core 0
|
|
jczn_2432s028r.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
|
|
|
|
jczn_2432s028r.menu.EventsCore.1=Core 1
|
|
jczn_2432s028r.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
|
|
jczn_2432s028r.menu.EventsCore.0=Core 0
|
|
jczn_2432s028r.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
|
|
|
|
jczn_2432s028r.menu.DebugLevel.none=None
|
|
jczn_2432s028r.menu.DebugLevel.none.build.code_debug=0
|
|
jczn_2432s028r.menu.DebugLevel.error=Error
|
|
jczn_2432s028r.menu.DebugLevel.error.build.code_debug=1
|
|
jczn_2432s028r.menu.DebugLevel.warn=Warn
|
|
jczn_2432s028r.menu.DebugLevel.warn.build.code_debug=2
|
|
jczn_2432s028r.menu.DebugLevel.info=Info
|
|
jczn_2432s028r.menu.DebugLevel.info.build.code_debug=3
|
|
jczn_2432s028r.menu.DebugLevel.debug=Debug
|
|
jczn_2432s028r.menu.DebugLevel.debug.build.code_debug=4
|
|
jczn_2432s028r.menu.DebugLevel.verbose=Verbose
|
|
jczn_2432s028r.menu.DebugLevel.verbose.build.code_debug=5
|
|
|
|
jczn_2432s028r.menu.EraseFlash.none=Disabled
|
|
jczn_2432s028r.menu.EraseFlash.none.upload.erase_cmd=
|
|
jczn_2432s028r.menu.EraseFlash.all=Enabled
|
|
jczn_2432s028r.menu.EraseFlash.all.upload.erase_cmd=-e
|
|
|
|
jczn_2432s028r.menu.ZigbeeMode.default=Disabled
|
|
jczn_2432s028r.menu.ZigbeeMode.default.build.zigbee_mode=
|
|
jczn_2432s028r.menu.ZigbeeMode.default.build.zigbee_libs=
|
|
jczn_2432s028r.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
|
|
jczn_2432s028r.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
|
|
jczn_2432s028r.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
|
|
|
|
##############################################################
|