#ifndef Pins_Arduino_h
#define Pins_Arduino_h

#include <stdint.h>
#include "soc/soc_caps.h"

#define HELTEC_CAPSULE_SENSOR_V3 true

#define USB_VID 0x303a
#define USB_PID 0x1001

// Some boards have too low voltage on this pin (board design bug)
// Use different pin with 3V and connect with 48
// and change this setup for the chosen pin (for example 38)
static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT + 48;
#define BUILTIN_LED    LED_BUILTIN  // backward compatibility
#define LED_BUILTIN    LED_BUILTIN
#define RGB_BUILTIN    LED_BUILTIN
#define RGB_BRIGHTNESS 64

static const uint8_t TX = 43;
static const uint8_t RX = 44;

static const uint8_t SDA = 41;
static const uint8_t SCL = 42;

static const uint8_t SS = 8;
static const uint8_t MOSI = 10;
static const uint8_t MISO = 11;
static const uint8_t SCK = 9;

static const uint8_t A0 = 1;
static const uint8_t A1 = 2;
static const uint8_t A2 = 3;
static const uint8_t A3 = 4;
static const uint8_t A4 = 5;
static const uint8_t A5 = 6;
static const uint8_t A6 = 7;
static const uint8_t A7 = 8;
static const uint8_t A8 = 9;
static const uint8_t A9 = 10;
static const uint8_t A10 = 11;
static const uint8_t A11 = 12;
static const uint8_t A12 = 13;
static const uint8_t A13 = 14;
static const uint8_t A14 = 15;
static const uint8_t A15 = 16;
static const uint8_t A16 = 17;
static const uint8_t A17 = 18;
static const uint8_t A18 = 19;
static const uint8_t A19 = 20;

static const uint8_t T1 = 1;
static const uint8_t T2 = 2;
static const uint8_t T3 = 3;
static const uint8_t T4 = 4;
static const uint8_t T5 = 5;
static const uint8_t T6 = 6;
static const uint8_t T7 = 7;
static const uint8_t T8 = 8;
static const uint8_t T9 = 9;
static const uint8_t T10 = 10;
static const uint8_t T11 = 11;
static const uint8_t T12 = 12;
static const uint8_t T13 = 13;
static const uint8_t T14 = 14;

static const uint8_t Vext = 21;
static const uint8_t LED0 = 33;
static const uint8_t LED1 = 34;
static const uint8_t USER_BUTTON = 18;

static const uint8_t GPS_RX_PIN = 5;
static const uint8_t GPS_TX_PIN = 4;
static const uint8_t GPS_RESET_PIN = 3;
static const uint8_t GPS_PPS_PIN = 1;

static const uint8_t ADC_BATTERY_PIN = 7;
static const uint8_t ADC_BATTERY_CTRL_PIN = 36;

static const uint8_t RST_LoRa = 12;
static const uint8_t BUSY_LoRa = 13;
static const uint8_t DIO0 = 14;

#endif /* Pins_Arduino_h */