Reliability fix for autoReconnect when assoc_fail, autoReconnect did not work before for these failures.
Changes behavior of WIFI_REASON_ASSOC_FAIL event when autoReconnect is set, removes WIFI_REASON_ASSOC_FAIL/WL_CONNECT_FAILED so retry waitforconnectresult loop stays active for the retry, was not working before.
* change parameter to signed int
As of wrong paramater, the following problem existed, that will be fixed now with this change.
BTScanResultsSet.cpp:67:8: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (i < 0)
* Change parameter and variable to int
As of wrong paramater, the following problem existed, that will be fixed now with this change.
BTScanResultsSet.cpp:67:8: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (i < 0)
* Revert "Examples update, add a note for configTime() that only one ntp server is supported by lwip",
fixed in espressif/esp32-arduino-lib-builder#51
This reverts commit 6b1020967a.
* SimpleTime: add NTPoDHCP option and TimeZone env variable
Summary
This PR is refactoring of SigmaDelta HAL in order to use IDF instead of current Register manipulation approach.
Impact
Change in API:
uint32_t sigmaDeltaSetup(uint8_t channel, uint32_t freq);
changed to -->
uint32_t sigmaDeltaSetup(uint8_t pin, uint8_t channel, uint32_t freq);
void sigmaDeltaAttachPin(uint8_t pin); removed, no longer needed. Pin is attached in sigmaDeltaSetup()
Summary
RMT HAL refactoring based on IDF.
Impact
Improves RMT by adding IDF v4.4 support.
Receiving RMT can handle any size of data.
rmtInit() has a new parameter - RxBufferSize - to hold any number of data when receiving RMT.
rmtWrite() has a new parameter - wait_tx_done - to block writing until sending all data.
Related links
fix#5905
23 Braille Display Page (0x41)
Braille display allow visually impaired computer users to read out text using raised pins. The pins are electro-mechanically
activated. These devices also have support for controls that help navigate the computer screen. Typically, braille displays
interface with software known as a screen reader in order to perform this navigation.
## Summary
Arduino ```setup()``` and ```loop()``` run under a Task with a fixed Stack size of 8KB.
Users may want to change this size.
This PR adds this possibility by just adding a line of code, as for example:
``` dart
ESP_LOOP_TASK_STACK_SIZE(16384);
void setup() {
}
void loop() {
}
```
## Impact
None. It adds a new functionality to ESP32 Arduino.
If ```ESP_LOOP_TASK_STACK_SIZE(newSize);``` is not declared/used, it will compile the sketch with the default stack size of 8KB.
## Related links
fix#6010https://github.com/espressif/arduino-esp32/issues/6010#issuecomment-992701658
Thanks @igrr for the suggestion!
* Refactoring function headers
Changing the header so the main TwoWire::requestFrom() definition uses a `size_t` instead of a `uint8_t`, removing the 255 bytes limit on I2C requests.
Co-authored-by: Flaviu Tamas <me@flaviutamas.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
* using ksz8081 only from ESP-IDF 4.4 onwards
The previous assertion only considerate the existance of ESP-IDF 4.3, but with the ESP-IDF 4.3.1 release this assertion would generate errors. Now only includes from ESP-IDF 4.4 onwards.
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Current implementation clears _headers when request was sent. If the
user added custom request headers, they will be lost and the redirected
request will not contain them. This commit changes the scope of cleanup
so that the headers survive redirects but don't survive connection
reuse.
1.0.6 changed scanning method to always scan all available channels during connect. This results in results in connect taking about ~3 seconds instead of ~1. This patch changes the behavior to use WIFI_FAST_SCAN if client used a specific channel.
Summary
Only affects ETH (not WiFi)
This PR solves #5733 by allowing the DHCP IDF server to complete its tasks and only then it sets a static IP.
This also solves another related failure reported in this issue (#5733 (comment)).
fix#5733
Impact
Adds a delay in order to wait for DHCP to actually terminate before setting the static IP configuration in ETH.
When using the FTM examples I got an error in the FTM_Initiator.ino:
*"wifi:channel=0 is invalid"*
I solved it for myself by simply passing the channel argument to be 1 in *WiFi.initiateFTM*. However, a better fix would be to directly change the default channel here.
* examples: WiFi and Ethernet examples organization
* examples: Change on CI scripts to include new folder
* Library name reverted to WiFi
* examples: WiFi and Ethernet examples organization in a new folder
* examples: Eth files moved from WiFi to Ethernet lib and CMakeLists updated
The client always appends "Basic" to the authorization header, however there are other auth schemes that can be used: https://developer.mozilla.org/en-US/docs/Web/HTTP/Authentication
For example "Bearer" when using OAuth.
This PR adds a `setAuthorizationType` method to the HTTPClient which allows this scheme to be configured by the caller. Authorization type is set to "Basic" by default so this will have no impact on existing usecases.
This adds a function to WiFiClientSecure to set the ALPN protocol.
This is required for an MQTT client to connect to AWS IoT when using an AWS Custom Authorizer, as described here.
Example code snippet:
...
WiFiClientSecure wiFiClient;
// ALPN protocol, needed with AWS custom authorizer
const char *aws_protos[] = {"mqtt", NULL};
void setup() {
wiFiClient.setCACert(AWSCAPEM);
wiFiClient.setAlpnProtocols(aws_protos);
}
...
Summary
Related to the issue #5773 and #2280.
_user_defined_size is removed from EEPROMClass because it is redundant in the current code
EEPROMClass::length() returns _size that is the true available size of EEPROM
Impact
_user_defined_size is removed from EEPROMClass
EEPROMClass::length() returns _size that is the true available size of EEPROM
Summary
Modifies WiFi lib to allow dynamic buffer allocation along with SPIRAM MALLOC enabled
This gives more heap space to the users
Related PR in Arduino Lib Builder: espressif/esp32-arduino-lib-builder#47
Impact
WiFi will work the same as it was in version 1.0.6, restoring free heap.
close#5630close#5474close#5699close#5697
* SPI.h add new call to return a SS pin number used.
As code example states, the SS pin needs to be explicitly set for output for SPI to work, but the pin number have to be coded in addition to the SPI logic in the library, which means this duplicates code. It is much better to just be able to get the pin number from library itself.
* Update SPI_Multiple_Buses.ino to use new pinSS method
Simplify the example case, to show usage of pinSS method. This also simplifies the example, removing duplicated code.
Summary
New feature: Add the ability to get the peer certificate of an SSL connectio. This is useful for IoT when the root/cert trust chain has a shorter lifecylce than the device itself. Includes example code.
It adds two methods to the WiFiClientSecure client:
bool getFingerprintSHA256( uint8_t fingerprint_remote_sha256[32]) -- return true and the fingerprint (i.e. the SHA256 of the raw x509 as a DER - identical to what you see in for example your webbrowser). Or false on error.
const mbedtls_x509_crt* getPeerCertificate(); -- return the actual X509 struct or NULL on error.
Impact
No impact; backwards compatible (only adds to the API)
When compiling with verbose logging, the build would error with a message saying `len` is not defined in `tud_vendor_rx_cb()`. This change fixes the error.
* SD.open() new feature for creating all folders in path
This PR adds to the SD.open() function option to create all folders to the file.
SD.open(const char* path, const char* mode, const bool create)
Default value of create is false.
When true folders are created.
From issue #5019
* Update vfs_api.cpp
memccpy -> memcpy
* SD_MMC deinit fix
Wrong deinit function was called.
* Fix build compilation due to changes in the HW_TIMER's structs
* Fix compilation warnings and errors with USB
* Update USBCDC.cpp
* Update CMakeLists.txt
* Update HWCDC.cpp
* Implement Thread-Safe I2C based on ESP-IDF API
* Update esp32-hal.h
* use proper types for size and timeout
* Allow disabling of the HAL locks
* Limit frequency settings to prevent Interrupt WDT
* SD.open() new feature for creating all folders in path
This PR adds to the SD.open() function option to create all folders to the file.
SD.open(const char* path, const char* mode, const bool create)
Default value of create is false.
When true folders are created.
From issue #5019
* Update vfs_api.cpp
memccpy -> memcpy
* File f = open() edit
added false for create
* SDMMC frequency selection based on board type
On Olimex ESP32 EVB I/O operations with SD card can cause error when LAN is used in same time.
Problem is disappearing if SD MMC frequency lower down from SDMMC_FREQ_HIGHSPEED to SDMMC_FREQ_DEFAULT.
No problem if WiFi used instead LAN.
* Code rewritten according to https://github.com/espressif/arduino-esp32/pull/5688#pullrequestreview-759359645
esp_eth_phy_new_ksz8081 was added in IDF after version 4.3 and generates a compilation error with IDF-4.3. This change will only use esp_eth_phy_new_ksz8081 for IDF versions after 4.3
Fixes: https://github.com/espressif/arduino-esp32/issues/5573
To reproduce:
1. Run any sample code that starts a BLE server, and does not call `setCallbacks`.
2. Connect to the device using the "LightBlue" app on iOS.
3. Observe crash shown in the issue linked above.
