* ci(wokwi): Pass diagram.json file if exists to pytest
* ci(wokwi): Rename diagrams to enable editing in Wokwi editor
* ci(tests): Use newest pytest version
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
* feat(board) add Waveshare ESP32-S3-Matrix
Adds support for the Waveshare ESP32-S3-Matrix board. Includes changes to the Rainmaker partitions as per PR #10046 .
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* add "getBattery" functions + #define simplicity
replaced all function protections with a #define to simplify code functionality. Also added "getBattery" functions to leverage "esp_modem_get_battery_status" call in ESP-MODEM.
* add "getBattery" function defs to PPP.h
* fix(ppp): uncomment error logging, change new function naming
* fix(ppp): rename new functions for naming conformity
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* IDF release/v5.1 dc859c1e67
* fix(lwip): Filter out V6 packets if V6 is not enabled
the ESP might accept and act on some IPv6 packets, even though IPv6 is not enabled for the interface in Arduino. This change makes the ESP ignore all IPv6 packets if IPv6 address is not available.
* fix(lwip): DNS header is not required
* fix(ot): Add LWIP_HOOK_IP6_INPUT_CUSTOM support
* feat(ledc): Allow attaching multiple pins to 1 channel
* feat(ledc): Add ledcWriteChannel function
* feat(ledc): Print info about already set channel
* docs(ledc): Add ledcWriteChannel function and attach update
* feat(ledc): Add example and fixes
* feat(ledc): Remove commented code
* feat(ledc): Fix missing new line at end of file
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
The setPins() function obviously comes from the SD_MMC lib. Not prepending
that lib, this code won't compile.
Signed-off-by: Martin Hübner <martin.hubner@web.de>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
* fix(nodemcu-32s): Fix Upload Speed menu on Windows
The board definition had 460800 as default upload speed, but that is invalid on Windows, so the menu did not show. This change puts 115200 as default, which will make the menu appear
* fix(board): Make build.board uppercase
* fix(example): Add better WPS logging
Provides a better log of what went wrong when using WPS
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat(eth): Allow setting the RX task stack size
Default stack size of 2K might not be enough in some cases. Increase the default to safer 4K and allow setting it to custom value.
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* Fix timeout in WebServer::_uploadReadByte and set timeout handleClient()
Fixes: #9990
* Set HTTP_MAX_CLOSE_WAIT equal to other HTTP_xxx_WAIT values
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* fix(uart): Set back Pin signal polarity
Fixes a problem related to inverting signal polarity back to normal after a previous inversion.
This shall set the correct polarity in Serial.begin().
* fix(uart): Remove useless commentary
Removes a commentary with a question about the inversing polarity function.
* fix(uart): Update comment
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
---------
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>
If the interface is already connected, try to enable IPv6 immediately. Otherwise the interface would need to go through disconnect/connect cycle for IPv6 to be enabled.
* feat(OThread): Add Library
* fix(OpenThread): fixes file list in CMakeLists.txt
* fix(openthread): Fixes JSON CI Files
* fix(openthread): Fixes JSON CI Files
* fix(openthread): Include Openthread guarding
* fix(openthread): COAP parametrization
* fix(openthread): Include Openthread guarding
* fix(openthread): Improves commentaries and code
* fix(openthread): Improves code
* fix(openthread): Includes StreamString.h
* feat(openthread): New Scan Example
* feat(openthread): Improved Scan Example
* feat(openthread): README.md
Initial documentation for ESP3 Arduino OpenThread CLI API.
* feat(openthread): helper functions documentation
Create helper_functions.md for ESP32 Arduino OpenThread API
* fix(openthread): begin end
* feat(openthread): onReceice example
* fix(openthread): tx queue error
* fix(doc): fixing documentation apresentation
Fixes the documentation first paragraph in order to make it easier fore reading. It also displays in the very top which SoC are supported by the library.
* fix(doc): documentation format
* feat(openthread): commentary
* fix(openthread): Typo, start/stop console
* fix(openthread): library properties
* ci(pre-commit): Apply automatic fixes
* feat(openthread): formatting text
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* fix(ppp): Make modem reset delay configurable
The delay required to reset Simcom modem modules varies significantly across
different models, even where they have otherwise identical AT command
sets.
Simcom A7672 was failing to reset with the default 200ms delay. Make the reset
delay configurable to allow customising this for a specific modem.
Default delay, if not specified is kept at 200ms.
* ci(pre-commit): Apply automatic fixes
---------
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat(net): Deprecate old WiFi APIs
Deprecates WiFiClient, WiFiServer, WiFiUdp and WiFiClientSecure
* fix(net): add defines to WiFi.h
Defines are added to not cause deprecation warnings. Will be removed in the future
* fix(net): Use typedefs instead to help with forward declarations
Defines do not allow forward declarations