mirror of
https://github.com/espressif/arduino-esp32
synced 2024-09-21 10:28:04 +00:00
ESP Matter + Arduino as IDF Component Light example (#10290)
* feat(matter): partition file for matter The declaration includes a partition for keys and SSL certificates. * feat(matter): matter light source code Adds necessary Matter + Arduino source code that will create a Matter compatible Light. * feat(matter): adds sdkconfig and CMake files Adds target sdkconfig files and the CMakeLists.txt in orde to build the application using Arduino+Matter as IDF component * fix(matter): wrong folder name * feat(matter): include example into registry * fix(matter): error with type in wrong place A declaration was incorrect due to a typo error. Sintax was corrected by deleting `BuiltInLED`. * feat(matter): add readme documentation * feat(matter): remove soc with no wifi or no ble * feat(matter): adjust all sdkconfig files * feat(matter): improve code and led status * feat(matter): add button and led gpio with kconfig * fix(matter): remove commented lines * fix(matter): remove commented lines * feat(matter): added a 2.4GHz SSID note Both the ESP32 device and the Smartphone running the Matter APP shall be in the same WiFi Network in order to achieve a successful commissioning process. * feat(matter): arduino managed comonent version Preparing the Arduino Managed Component to use Core version 3.0.5 or higher. * feat(matter): adds information about google Goggle Home Assistant requires special configurtation in order to allow the Light to show up in the GHA APP. * feat(matter): arduino component version Set final Arduino Managed Component to 3.0.5 necessary because of -DESP32=ESP32, in order to compile the project. * ci(pre-commit): Apply automatic fixes * fix(typo): typo and commentaries * fix(typo): typo and commentaries * fix(typo): typo and commentaries * fix(typo): typo and commentaries * fix(typo): typo and commentaries * fix(typo): typo and commentaries * fix(typo): typo and commentaries * fix(typo): typo and commentaries * fix(typo): typo and commentaries * fix(typo): typo and commentaries * fix(typo): typo and commentaries * fix(typo): typo and commentaries * fix(typo): typo and commentaries * fix(typo): typo and commentaries * fix(typo): typo and commentaries * fix(typo): typo and commentaries * fix(typo): typo and commentaries * fix(typo): typo and commentaries * fix(matter): spell check ignore for CI * ci(pre-commit): Apply automatic fixes * fix(matter): spell check ignore for CI * fix(matter): spell check ignore for CI * fix(matter): spell check ignore for CI * ci(pre-commit): Apply automatic fixes --------- Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
This commit is contained in:
Rodrigo Garcia
GitHub
parent
462870df24
commit
8d772d5e89
@ -97,3 +97,4 @@ dependencies:
|
|||||||
examples:
|
examples:
|
||||||
- path: ./idf_component_examples/hello_world
|
- path: ./idf_component_examples/hello_world
|
||||||
- path: ./idf_component_examples/hw_cdc_hello_world
|
- path: ./idf_component_examples/hw_cdc_hello_world
|
||||||
|
- path: ./idf_component_examples/esp_matter_light
|
||||||
|
|||||||
27
idf_component_examples/esp_matter_light/CMakeLists.txt
Normal file
27
idf_component_examples/esp_matter_light/CMakeLists.txt
Normal file
@ -0,0 +1,27 @@
|
|||||||
|
# The following lines of boilerplate have to be in your project's
|
||||||
|
# CMakeLists in this exact order for cmake to work correctly
|
||||||
|
cmake_minimum_required(VERSION 3.5)
|
||||||
|
|
||||||
|
set(PROJECT_VER "1.0")
|
||||||
|
set(PROJECT_VER_NUMBER 1)
|
||||||
|
|
||||||
|
# This should be done before using the IDF_TARGET variable.
|
||||||
|
include($ENV{IDF_PATH}/tools/cmake/project.cmake)
|
||||||
|
|
||||||
|
project(arduino_managed_component_light)
|
||||||
|
|
||||||
|
# WARNING: This is just an example for using key for decrypting the encrypted OTA image
|
||||||
|
# Please do not use it as is.
|
||||||
|
if(CONFIG_ENABLE_ENCRYPTED_OTA)
|
||||||
|
target_add_binary_data(light.elf "esp_image_encryption_key.pem" TEXT)
|
||||||
|
endif()
|
||||||
|
|
||||||
|
if(CONFIG_IDF_TARGET_ESP32C2)
|
||||||
|
include(relinker)
|
||||||
|
endif()
|
||||||
|
|
||||||
|
idf_build_set_property(CXX_COMPILE_OPTIONS "-std=gnu++17;-Os;-DCHIP_HAVE_CONFIG_H" APPEND)
|
||||||
|
idf_build_set_property(C_COMPILE_OPTIONS "-Os" APPEND)
|
||||||
|
# For RISCV chips, project_include.cmake sets -Wno-format, but does not clear various
|
||||||
|
# flags that depend on -Wformat
|
||||||
|
idf_build_set_property(COMPILE_OPTIONS "-Wno-format-nonliteral;-Wno-format-security" APPEND)
|
||||||
90
idf_component_examples/esp_matter_light/README.md
Normal file
90
idf_component_examples/esp_matter_light/README.md
Normal file
@ -0,0 +1,90 @@
|
|||||||
|
| Supported Targets | ESP32-S3 | ESP32-C3 | ESP32-C6 |
|
||||||
|
| ----------------- | -------- | -------- | -------- |
|
||||||
|
|
||||||
|
|
||||||
|
# Managed Component Light
|
||||||
|
|
||||||
|
This example is configured by default to work with the ESP32-S3, which has the RGB LED GPIO set as pin 48 and the BOOT button on GPIO 0.
|
||||||
|
|
||||||
|
This example creates a Color Temperature Light device using the esp_matter component downloaded from the [Espressif Component Registry](https://components.espressif.com/) instead of an extra component locally, so the example can work without setting up the esp-matter environment.
|
||||||
|
|
||||||
|
See the [docs](https://docs.espressif.com/projects/esp-matter/en/latest/esp32/developing.html) for more information about building and flashing the firmware.
|
||||||
|
|
||||||
|
The code is based on the Arduino API and uses Arduino as an IDF Component.
|
||||||
|
|
||||||
|
## How to use it
|
||||||
|
|
||||||
|
Once the device runs for the first time, it must be commissioned to the Matter Fabric of the available Matter Environment.
|
||||||
|
Possible Matter Environments are:
|
||||||
|
- Amazon Alexa
|
||||||
|
- Google Home Assistant (*)
|
||||||
|
- Apple Home
|
||||||
|
- Open Source Home Assistant
|
||||||
|
|
||||||
|
(*) Google Home Assistant requires the user to set up a Matter Light using the [Google Home Developer Console](https://developers.home.google.com/codelabs/matter-device#2). It is necessary to create a Matter Light device with VID = 0xFFF1 and PID = 0x8000. Otherwise, the Light won't show up in the GHA APP. This action is necessary because the Firmware uses Testing credentials and Google requires the user to create the testing device before using it.
|
||||||
|
|
||||||
|
There is no QR Code to be used when the Smartphone APP wants to add the Matter Device.
|
||||||
|
Please enter the code manually: `34970112332`
|
||||||
|
|
||||||
|
The devboard has a built-in LED that will be used as the Matter Light.
|
||||||
|
The default setting of the code uses pin 48 for the ESP32-S3.
|
||||||
|
Please change it in `main/matter_accessory_driver.h` or in the `sdkconfig.defaults.<SOC>` file.
|
||||||
|
|
||||||
|
## LED Status and Factory Mode
|
||||||
|
|
||||||
|
The WS2812b built-in LED will turn purple as soon as the device is flashed and runs for the first time.
|
||||||
|
The purple color indicates that the Matter Accessory has not been commissioned yet.
|
||||||
|
After using a Matter provider Smartphone APP to add a Matter device to your Home Application, it may turn orange to indicate that it has no Wi-Fi connection.
|
||||||
|
|
||||||
|
Once it connects to the Wi-Fi network, the LED will turn white to indicate that Matter is working and the device is connected to the Matter Environment.
|
||||||
|
Please note that Matter over Wi-Fi using an ESP32 device will connect to a 2.4 GHz Wi-Fi SSID, therefore the Commissioner APP Smartphone shall be connected to this SSID.
|
||||||
|
|
||||||
|
The Matter and Wi-Fi configuration will be stored in NVS to ensure that it will connect to the Matter Fabric and Wi-Fi Network again once it is reset.
|
||||||
|
|
||||||
|
The Matter Smartphone APP will control the light state (ON/OFF), temperature (Warm/Cold White), and brightness.
|
||||||
|
|
||||||
|
## On Board Light toggle button
|
||||||
|
|
||||||
|
The built-in BOOT button will toggle On/Off and replicate the new state to the Matter Environment, making it visible in the Matter Smartphone APP as well.
|
||||||
|
|
||||||
|
## Returning to the Factory State
|
||||||
|
|
||||||
|
Holding the BOOT button pressed for more than 10 seconds and then releasing it will erase all Matter and Wi-Fi configuration, forcing it to reset to factory state. After that, the device needs to be commissioned again. Previous setups done in the Smartphone APP won't work again; therefore, the virtual device shall be removed from the APP.
|
||||||
|
|
||||||
|
## Building the Application using Wi-Fi and Matter
|
||||||
|
|
||||||
|
Use ESP-IDF 5.1.4 from https://github.com/espressif/esp-idf/tree/release/v5.1
|
||||||
|
This example has been tested with Arduino Core 3.0.4
|
||||||
|
|
||||||
|
The project will download all necessary components, including the Arduino Core.
|
||||||
|
Run `idf.py SDKCONFIG_DEFAULTS="sdkconfig.defaults.<SOC>.idf" -p <PORT> flash monitor`
|
||||||
|
|
||||||
|
Example for ESP32-S3/Linux | macOS:
|
||||||
|
`idf.py SDKCONFIG_DEFAULTS="sdkconfig.defaults.esp32s3" -p /dev/ttyACM0 flash monitor`
|
||||||
|
Example for ESP32-C3/Windows:
|
||||||
|
`idf.py -D SDKCONFIG_DEFAULTS="sdkconfig.defaults.esp32c3" -p com3 flash monitor`
|
||||||
|
|
||||||
|
It may be necessary to delete some folders and files before running `idf.py`
|
||||||
|
Linux/macOS: `rm -rf build managed_components sdkconfig dependencies.lock`
|
||||||
|
Windows: `rmdir /s/q build managed_components` and `del sdkconfig dependencies.lock`
|
||||||
|
|
||||||
|
There is a configuration file for these SoC: esp32s3, esp32c3, esp32c6.
|
||||||
|
Those are the tested devices that have a WS2812 RGB LED and can run BLE, Wi-Fi and Matter.
|
||||||
|
|
||||||
|
In case it is necessary to change the Button Pin or the REG LED Pin, please use the `menuconfig`
|
||||||
|
`idf.py menuconfig` and change the Menu Option `Light Matter Accessory`
|
||||||
|
|
||||||
|
## Using OpenThread with Matter
|
||||||
|
|
||||||
|
This is possible with the ESP32-C6.
|
||||||
|
It is neessasy to have a Thread Border Routed in the Matter Environment. Check you matter hardware provider.
|
||||||
|
In order to build the application that will use Thread Networking instead of Wi-Fi, please execute:
|
||||||
|
|
||||||
|
Example for ESP32-S3/Linux | macOS:
|
||||||
|
`idf.py SDKCONFIG_DEFAULTS="sdkconfig.defaults.c6_thread" -p /dev/ttyACM0 flash monitor`
|
||||||
|
Example for ESP32-C3/Windows:
|
||||||
|
`idf.py -D SDKCONFIG_DEFAULTS="sdkconfig.defaults.c6_thread" -p com3 flash monitor`
|
||||||
|
|
||||||
|
It may be necessary to delete some folders and files before running `idf.py`
|
||||||
|
Linux/macOS: `rm -rf build managed_components sdkconfig dependencies.lock`
|
||||||
|
Windows: `rmdir /s/q build managed_components` and `del sdkconfig dependencies.lock`
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
idf_component_register(SRC_DIRS "."
|
||||||
|
INCLUDE_DIRS ".")
|
||||||
|
|
||||||
|
set_property(TARGET ${COMPONENT_LIB} PROPERTY CXX_STANDARD 17)
|
||||||
|
target_compile_options(${COMPONENT_LIB} PRIVATE "-DCHIP_HAVE_CONFIG_H")
|
||||||
102
idf_component_examples/esp_matter_light/main/Kconfig.projbuild
Normal file
102
idf_component_examples/esp_matter_light/main/Kconfig.projbuild
Normal file
@ -0,0 +1,102 @@
|
|||||||
|
menu "Light Matter Accessory"
|
||||||
|
menu "On Board Light ON/OFF Button"
|
||||||
|
config BUTTON_PIN
|
||||||
|
int
|
||||||
|
prompt "Button 1 GPIO"
|
||||||
|
default ENV_GPIO_BOOT_BUTTON
|
||||||
|
range -1 ENV_GPIO_IN_RANGE_MAX
|
||||||
|
help
|
||||||
|
The GPIO pin for button that will be used to turn on/off the Matter Light. It shall be connected to a push button. It can use the BOOT button of the development board.
|
||||||
|
endmenu
|
||||||
|
|
||||||
|
|
||||||
|
menu "LEDs"
|
||||||
|
config WS2812_PIN
|
||||||
|
int
|
||||||
|
prompt "WS2812 RGB LED GPIO"
|
||||||
|
default ENV_GPIO_RGB_LED
|
||||||
|
range -1 ENV_GPIO_OUT_RANGE_MAX
|
||||||
|
help
|
||||||
|
The GPIO pin for the Matter Light that will be driven by RMT. It shall be connected to one single WS2812 RGB LED.
|
||||||
|
endmenu
|
||||||
|
|
||||||
|
# TARGET CONFIGURATION
|
||||||
|
if IDF_TARGET_ESP32C3
|
||||||
|
config ENV_GPIO_RANGE_MIN
|
||||||
|
int
|
||||||
|
default 0
|
||||||
|
|
||||||
|
config ENV_GPIO_RANGE_MAX
|
||||||
|
int
|
||||||
|
default 19
|
||||||
|
# GPIOs 20/21 are always used by UART in examples
|
||||||
|
|
||||||
|
config ENV_GPIO_IN_RANGE_MAX
|
||||||
|
int
|
||||||
|
default ENV_GPIO_RANGE_MAX
|
||||||
|
|
||||||
|
config ENV_GPIO_OUT_RANGE_MAX
|
||||||
|
int
|
||||||
|
default ENV_GPIO_RANGE_MAX
|
||||||
|
|
||||||
|
config ENV_GPIO_BOOT_BUTTON
|
||||||
|
int
|
||||||
|
default 9
|
||||||
|
|
||||||
|
config ENV_GPIO_RGB_LED
|
||||||
|
int
|
||||||
|
default 8
|
||||||
|
endif
|
||||||
|
if IDF_TARGET_ESP32C6
|
||||||
|
config ENV_GPIO_RANGE_MIN
|
||||||
|
int
|
||||||
|
default 0
|
||||||
|
|
||||||
|
config ENV_GPIO_RANGE_MAX
|
||||||
|
int
|
||||||
|
default 30
|
||||||
|
# GPIOs 16/17 are always used by UART in examples
|
||||||
|
|
||||||
|
config ENV_GPIO_IN_RANGE_MAX
|
||||||
|
int
|
||||||
|
default ENV_GPIO_RANGE_MAX
|
||||||
|
|
||||||
|
config ENV_GPIO_OUT_RANGE_MAX
|
||||||
|
int
|
||||||
|
default ENV_GPIO_RANGE_MAX
|
||||||
|
|
||||||
|
config ENV_GPIO_BOOT_BUTTON
|
||||||
|
int
|
||||||
|
default 9
|
||||||
|
|
||||||
|
config ENV_GPIO_RGB_LED
|
||||||
|
int
|
||||||
|
default 8
|
||||||
|
endif
|
||||||
|
if IDF_TARGET_ESP32S3
|
||||||
|
config ENV_GPIO_RANGE_MIN
|
||||||
|
int
|
||||||
|
default 0
|
||||||
|
|
||||||
|
config ENV_GPIO_RANGE_MAX
|
||||||
|
int
|
||||||
|
default 48
|
||||||
|
|
||||||
|
config ENV_GPIO_IN_RANGE_MAX
|
||||||
|
int
|
||||||
|
default ENV_GPIO_RANGE_MAX
|
||||||
|
|
||||||
|
config ENV_GPIO_OUT_RANGE_MAX
|
||||||
|
int
|
||||||
|
default ENV_GPIO_RANGE_MAX
|
||||||
|
|
||||||
|
config ENV_GPIO_BOOT_BUTTON
|
||||||
|
int
|
||||||
|
default 0
|
||||||
|
|
||||||
|
config ENV_GPIO_RGB_LED
|
||||||
|
int
|
||||||
|
default 48
|
||||||
|
endif
|
||||||
|
|
||||||
|
endmenu
|
||||||
237
idf_component_examples/esp_matter_light/main/builtinLED.cpp
Normal file
237
idf_component_examples/esp_matter_light/main/builtinLED.cpp
Normal file
@ -0,0 +1,237 @@
|
|||||||
|
/*
|
||||||
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
||||||
|
Unless required by applicable law or agreed to in writing, this
|
||||||
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
||||||
|
CONDITIONS OF ANY KIND, either express or implied.
|
||||||
|
This will implement the onboard WS2812b LED as a LED indicator
|
||||||
|
It can be used to indicate some state or status of the device
|
||||||
|
The LED can be controlled using RGB, HSV or color temperature, brightness
|
||||||
|
|
||||||
|
In this example, the LED Indicator class is used as the Matter light accessory
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "builtinLED.h"
|
||||||
|
|
||||||
|
typedef struct {
|
||||||
|
uint16_t hue;
|
||||||
|
uint8_t saturation;
|
||||||
|
} HS_color_t;
|
||||||
|
|
||||||
|
static const HS_color_t temperatureTable[] = {
|
||||||
|
{4, 100}, {8, 100}, {11, 100}, {14, 100}, {16, 100}, {18, 100}, {20, 100}, {22, 100}, {24, 100}, {25, 100}, {27, 100}, {28, 100}, {30, 100}, {31, 100},
|
||||||
|
{31, 95}, {30, 89}, {30, 85}, {29, 80}, {29, 76}, {29, 73}, {29, 69}, {28, 66}, {28, 63}, {28, 60}, {28, 57}, {28, 54}, {28, 52}, {27, 49},
|
||||||
|
{27, 47}, {27, 45}, {27, 43}, {27, 41}, {27, 39}, {27, 37}, {27, 35}, {27, 33}, {27, 31}, {27, 30}, {27, 28}, {27, 26}, {27, 25}, {27, 23},
|
||||||
|
{27, 22}, {27, 21}, {27, 19}, {27, 18}, {27, 17}, {27, 15}, {28, 14}, {28, 13}, {28, 12}, {29, 10}, {29, 9}, {30, 8}, {31, 7}, {32, 6},
|
||||||
|
{34, 5}, {36, 4}, {41, 3}, {49, 2}, {0, 0}, {294, 2}, {265, 3}, {251, 4}, {242, 5}, {237, 6}, {233, 7}, {231, 8}, {229, 9}, {228, 10},
|
||||||
|
{227, 11}, {226, 11}, {226, 12}, {225, 13}, {225, 13}, {224, 14}, {224, 14}, {224, 15}, {224, 15}, {223, 16}, {223, 16}, {223, 17}, {223, 17}, {223, 17},
|
||||||
|
{222, 18}, {222, 18}, {222, 19}, {222, 19}, {222, 19}, {222, 19}, {222, 20}, {222, 20}, {222, 20}, {222, 21}, {222, 21}
|
||||||
|
};
|
||||||
|
|
||||||
|
/* step brightness table: gamma = 2.3 */
|
||||||
|
static const uint8_t gamma_table[MAX_PROGRESS] = {
|
||||||
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1,
|
||||||
|
1, 1, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 4, 4, 4, 4, 4, 5, 5, 5, 6, 6, 6, 6, 7, 7, 7, 8,
|
||||||
|
8, 8, 9, 9, 9, 10, 10, 10, 11, 11, 12, 12, 13, 13, 13, 14, 14, 15, 15, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20,
|
||||||
|
21, 22, 22, 23, 23, 24, 25, 25, 26, 26, 27, 28, 28, 29, 30, 30, 31, 32, 33, 33, 34, 35, 36, 36, 37, 38, 39, 40, 40,
|
||||||
|
41, 42, 43, 44, 45, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68,
|
||||||
|
69, 70, 71, 72, 74, 75, 76, 77, 78, 79, 81, 82, 83, 84, 86, 87, 88, 89, 91, 92, 93, 95, 96, 97, 99, 100, 101, 103, 104,
|
||||||
|
105, 107, 108, 110, 111, 112, 114, 115, 117, 118, 120, 121, 123, 124, 126, 128, 129, 131, 132, 134, 135, 137, 139, 140, 142, 144, 145, 147, 149,
|
||||||
|
150, 152, 154, 156, 157, 159, 161, 163, 164, 166, 168, 170, 172, 174, 175, 177, 179, 181, 183, 185, 187, 189, 191, 193, 195, 197, 199, 201, 203,
|
||||||
|
205, 207, 209, 211, 213, 215, 217, 219, 221, 223, 226, 228, 230, 232, 234, 236, 239, 241, 243, 245, 248, 250, 252, 255,
|
||||||
|
};
|
||||||
|
|
||||||
|
BuiltInLED::BuiltInLED() {
|
||||||
|
pin_number = (uint8_t)-1; // no pin number
|
||||||
|
state = false; // LED is off
|
||||||
|
hsv_color.value = 0; // black color
|
||||||
|
}
|
||||||
|
|
||||||
|
BuiltInLED::~BuiltInLED() {
|
||||||
|
end();
|
||||||
|
}
|
||||||
|
|
||||||
|
led_indicator_color_hsv_t BuiltInLED::rgb2hsv(led_indicator_color_rgb_t rgb) {
|
||||||
|
led_indicator_color_hsv_t hsv;
|
||||||
|
uint8_t minRGB, maxRGB;
|
||||||
|
uint8_t delta;
|
||||||
|
|
||||||
|
minRGB = rgb.r < rgb.g ? (rgb.r < rgb.b ? rgb.r : rgb.b) : (rgb.g < rgb.b ? rgb.g : rgb.b);
|
||||||
|
maxRGB = rgb.r > rgb.g ? (rgb.r > rgb.b ? rgb.r : rgb.b) : (rgb.g > rgb.b ? rgb.g : rgb.b);
|
||||||
|
hsv.value = 0;
|
||||||
|
hsv.v = maxRGB;
|
||||||
|
delta = maxRGB - minRGB;
|
||||||
|
|
||||||
|
if (delta == 0) {
|
||||||
|
hsv.h = 0;
|
||||||
|
hsv.s = 0;
|
||||||
|
} else {
|
||||||
|
hsv.s = delta * 255 / maxRGB;
|
||||||
|
|
||||||
|
if (rgb.r == maxRGB) {
|
||||||
|
hsv.h = (60 * (rgb.g - rgb.b) / delta + 360) % 360;
|
||||||
|
} else if (rgb.g == maxRGB) {
|
||||||
|
hsv.h = (60 * (rgb.b - rgb.r) / delta + 120);
|
||||||
|
} else {
|
||||||
|
hsv.h = (60 * (rgb.r - rgb.g) / delta + 240);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
return hsv;
|
||||||
|
}
|
||||||
|
|
||||||
|
led_indicator_color_rgb_t BuiltInLED::hsv2rgb(led_indicator_color_hsv_t hsv) {
|
||||||
|
led_indicator_color_rgb_t rgb;
|
||||||
|
uint8_t rgb_max = hsv.v;
|
||||||
|
uint8_t rgb_min = rgb_max * (255 - hsv.s) / 255.0f;
|
||||||
|
|
||||||
|
uint8_t i = hsv.h / 60;
|
||||||
|
uint8_t diff = hsv.h % 60;
|
||||||
|
|
||||||
|
// RGB adjustment amount by hue
|
||||||
|
uint8_t rgb_adj = (rgb_max - rgb_min) * diff / 60;
|
||||||
|
rgb.value = 0;
|
||||||
|
switch (i) {
|
||||||
|
case 0:
|
||||||
|
rgb.r = rgb_max;
|
||||||
|
rgb.g = rgb_min + rgb_adj;
|
||||||
|
rgb.b = rgb_min;
|
||||||
|
break;
|
||||||
|
case 1:
|
||||||
|
rgb.r = rgb_max - rgb_adj;
|
||||||
|
rgb.g = rgb_max;
|
||||||
|
rgb.b = rgb_min;
|
||||||
|
break;
|
||||||
|
case 2:
|
||||||
|
rgb.r = rgb_min;
|
||||||
|
rgb.g = rgb_max;
|
||||||
|
rgb.b = rgb_min + rgb_adj;
|
||||||
|
break;
|
||||||
|
case 3:
|
||||||
|
rgb.r = rgb_min;
|
||||||
|
rgb.g = rgb_max - rgb_adj;
|
||||||
|
rgb.b = rgb_max;
|
||||||
|
break;
|
||||||
|
case 4:
|
||||||
|
rgb.r = rgb_min + rgb_adj;
|
||||||
|
rgb.g = rgb_min;
|
||||||
|
rgb.b = rgb_max;
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
rgb.r = rgb_max;
|
||||||
|
rgb.g = rgb_min;
|
||||||
|
rgb.b = rgb_max - rgb_adj;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
// gamma correction
|
||||||
|
rgb.r = gamma_table[rgb.r];
|
||||||
|
rgb.g = gamma_table[rgb.g];
|
||||||
|
rgb.b = gamma_table[rgb.b];
|
||||||
|
return rgb;
|
||||||
|
}
|
||||||
|
|
||||||
|
void BuiltInLED::begin(uint8_t pin) {
|
||||||
|
if (pin < NUM_DIGITAL_PINS) {
|
||||||
|
pin_number = pin;
|
||||||
|
log_i("Initializing pin %d", pin);
|
||||||
|
} else {
|
||||||
|
log_e("Invalid pin (%d) number", pin);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
void BuiltInLED::end() {
|
||||||
|
state = false;
|
||||||
|
write(); // turn off the LED
|
||||||
|
if (pin_number < NUM_DIGITAL_PINS) {
|
||||||
|
if (!rmtDeinit(pin_number)) {
|
||||||
|
log_e("Failed to deinitialize RMT");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void BuiltInLED::on() {
|
||||||
|
state = true;
|
||||||
|
}
|
||||||
|
|
||||||
|
void BuiltInLED::off() {
|
||||||
|
state = false;
|
||||||
|
}
|
||||||
|
|
||||||
|
void BuiltInLED::toggle() {
|
||||||
|
state = !state;
|
||||||
|
}
|
||||||
|
|
||||||
|
bool BuiltInLED::getState() {
|
||||||
|
return state;
|
||||||
|
}
|
||||||
|
|
||||||
|
bool BuiltInLED::write() {
|
||||||
|
led_indicator_color_rgb_t rgb_color = getRGB();
|
||||||
|
log_d("Writing to pin %d with state = %s", pin_number, state ? "ON" : "OFF");
|
||||||
|
log_d("HSV: %d, %d, %d", hsv_color.h, hsv_color.s, hsv_color.v);
|
||||||
|
log_d("RGB: %d, %d, %d", rgb_color.r, rgb_color.g, rgb_color.b);
|
||||||
|
if (pin_number < NUM_DIGITAL_PINS) {
|
||||||
|
if (state) {
|
||||||
|
rgbLedWrite(pin_number, rgb_color.r, rgb_color.g, rgb_color.b);
|
||||||
|
} else {
|
||||||
|
rgbLedWrite(pin_number, 0, 0, 0);
|
||||||
|
}
|
||||||
|
return true;
|
||||||
|
} else {
|
||||||
|
log_e("Invalid pin (%d) number", pin_number);
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void BuiltInLED::setBrightness(uint8_t brightness) {
|
||||||
|
hsv_color.v = brightness;
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t BuiltInLED::getBrightness() {
|
||||||
|
return hsv_color.v;
|
||||||
|
}
|
||||||
|
|
||||||
|
void BuiltInLED::setHSV(led_indicator_color_hsv_t hsv) {
|
||||||
|
if (hsv.h > MAX_HUE) {
|
||||||
|
hsv.h = MAX_HUE;
|
||||||
|
}
|
||||||
|
hsv_color.value = hsv.value;
|
||||||
|
}
|
||||||
|
|
||||||
|
led_indicator_color_hsv_t BuiltInLED::getHSV() {
|
||||||
|
return hsv_color;
|
||||||
|
}
|
||||||
|
|
||||||
|
void BuiltInLED::setRGB(led_indicator_color_rgb_t rgb_color) {
|
||||||
|
hsv_color = rgb2hsv(rgb_color);
|
||||||
|
}
|
||||||
|
|
||||||
|
led_indicator_color_rgb_t BuiltInLED::getRGB() {
|
||||||
|
return hsv2rgb(hsv_color);
|
||||||
|
}
|
||||||
|
|
||||||
|
void BuiltInLED::setTemperature(uint32_t temperature) {
|
||||||
|
uint16_t hue;
|
||||||
|
uint8_t saturation;
|
||||||
|
|
||||||
|
log_d("Requested Temperature: %ld", temperature);
|
||||||
|
//hsv_color.v = gamma_table[((temperature >> 25) & 0x7F)];
|
||||||
|
temperature &= 0xFFFFFF;
|
||||||
|
if (temperature < 600) {
|
||||||
|
hue = 0;
|
||||||
|
saturation = 100;
|
||||||
|
} else {
|
||||||
|
if (temperature > 10000) {
|
||||||
|
hue = 222;
|
||||||
|
saturation = 21 + (temperature - 10000) * 41 / 990000;
|
||||||
|
} else {
|
||||||
|
temperature -= 600;
|
||||||
|
temperature /= 100;
|
||||||
|
hue = temperatureTable[temperature].hue;
|
||||||
|
saturation = temperatureTable[temperature].saturation;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
saturation = (saturation * 255) / 100;
|
||||||
|
// brightness is not changed
|
||||||
|
hsv_color.h = hue;
|
||||||
|
hsv_color.s = saturation;
|
||||||
|
log_d("Calculated Temperature: %ld, Hue: %d, Saturation: %d, Brightness: %d", temperature, hue, saturation, hsv_color.v);
|
||||||
|
}
|
||||||
74
idf_component_examples/esp_matter_light/main/builtinLED.h
Normal file
74
idf_component_examples/esp_matter_light/main/builtinLED.h
Normal file
@ -0,0 +1,74 @@
|
|||||||
|
/*
|
||||||
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
||||||
|
Unless required by applicable law or agreed to in writing, this
|
||||||
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
||||||
|
CONDITIONS OF ANY KIND, either express or implied.
|
||||||
|
This will implement the onboard WS2812b LED as a LED indicator
|
||||||
|
It can be used to indicate some state or status of the device
|
||||||
|
The LED can be controlled using RGB, HSV or color temperature, brightness
|
||||||
|
|
||||||
|
In this example, the BuiltInLED class is used as the Matter light accessory
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include <Arduino.h>
|
||||||
|
|
||||||
|
#define MAX_HUE 360
|
||||||
|
#define MAX_SATURATION 255
|
||||||
|
#define MAX_BRIGHTNESS 255
|
||||||
|
#define MAX_PROGRESS 256
|
||||||
|
|
||||||
|
typedef struct {
|
||||||
|
union {
|
||||||
|
struct {
|
||||||
|
uint32_t v : 8; /*!< Brightness/Value of the LED. 0-255 */
|
||||||
|
uint32_t s : 8; /*!< Saturation of the LED. 0-255 */
|
||||||
|
uint32_t h : 9; /*!< Hue of the LED. 0-360 */
|
||||||
|
};
|
||||||
|
uint32_t value; /*!< IHSV value of the LED. */
|
||||||
|
};
|
||||||
|
} led_indicator_color_hsv_t;
|
||||||
|
|
||||||
|
typedef struct {
|
||||||
|
union {
|
||||||
|
struct {
|
||||||
|
uint32_t r : 8; /*!< Red component of the LED color. Range: 0-255. */
|
||||||
|
uint32_t g : 8; /*!< Green component of the LED color. Range: 0-255. */
|
||||||
|
uint32_t b : 8; /*!< Blue component of the LED color. Range: 0-255. */
|
||||||
|
};
|
||||||
|
uint32_t value; /*!< Combined RGB value of the LED color. */
|
||||||
|
};
|
||||||
|
} led_indicator_color_rgb_t;
|
||||||
|
|
||||||
|
class BuiltInLED {
|
||||||
|
private:
|
||||||
|
uint8_t pin_number;
|
||||||
|
bool state;
|
||||||
|
led_indicator_color_hsv_t hsv_color;
|
||||||
|
|
||||||
|
public:
|
||||||
|
BuiltInLED();
|
||||||
|
~BuiltInLED();
|
||||||
|
|
||||||
|
static led_indicator_color_hsv_t rgb2hsv(led_indicator_color_rgb_t rgb_value);
|
||||||
|
static led_indicator_color_rgb_t hsv2rgb(led_indicator_color_hsv_t hsv);
|
||||||
|
|
||||||
|
void begin(uint8_t pin);
|
||||||
|
void end();
|
||||||
|
|
||||||
|
void on();
|
||||||
|
void off();
|
||||||
|
void toggle();
|
||||||
|
bool getState();
|
||||||
|
|
||||||
|
bool write();
|
||||||
|
|
||||||
|
void setBrightness(uint8_t brightness);
|
||||||
|
uint8_t getBrightness();
|
||||||
|
void setHSV(led_indicator_color_hsv_t hsv);
|
||||||
|
led_indicator_color_hsv_t getHSV();
|
||||||
|
void setRGB(led_indicator_color_rgb_t color);
|
||||||
|
led_indicator_color_rgb_t getRGB();
|
||||||
|
void setTemperature(uint32_t temperature);
|
||||||
|
};
|
||||||
@ -0,0 +1,12 @@
|
|||||||
|
dependencies:
|
||||||
|
espressif/esp_matter:
|
||||||
|
version: "^1.3.0"
|
||||||
|
# Adds Arduino Core from GitHub repository using main branch
|
||||||
|
espressif/arduino-esp32:
|
||||||
|
version: "^3.0.5"
|
||||||
|
override_path: "../../../"
|
||||||
|
pre_release: true
|
||||||
|
|
||||||
|
# testing - using Arduino from the repository
|
||||||
|
# version: "master" # branch or commit
|
||||||
|
# git: https://github.com/espressif/arduino-esp32.git
|
||||||
@ -0,0 +1,89 @@
|
|||||||
|
/*
|
||||||
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
||||||
|
Unless required by applicable law or agreed to in writing, this
|
||||||
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
||||||
|
CONDITIONS OF ANY KIND, either express or implied.
|
||||||
|
*/
|
||||||
|
#include <Arduino.h>
|
||||||
|
#include <esp_err.h>
|
||||||
|
#include <esp_matter_attribute_utils.h>
|
||||||
|
#include "builtinLED.h"
|
||||||
|
#include "matter_accessory_driver.h"
|
||||||
|
|
||||||
|
/* Do any conversions/remapping for the actual value here */
|
||||||
|
esp_err_t light_accessory_set_power(void *led, uint8_t val) {
|
||||||
|
BuiltInLED *builtinLED = (BuiltInLED *)led;
|
||||||
|
esp_err_t err = ESP_OK;
|
||||||
|
if (val) {
|
||||||
|
builtinLED->on();
|
||||||
|
} else {
|
||||||
|
builtinLED->off();
|
||||||
|
}
|
||||||
|
if (!builtinLED->write()) {
|
||||||
|
err = ESP_FAIL;
|
||||||
|
}
|
||||||
|
log_i("LED set power: %d", val);
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
|
||||||
|
esp_err_t light_accessory_set_brightness(void *led, uint8_t val) {
|
||||||
|
esp_err_t err = ESP_OK;
|
||||||
|
BuiltInLED *builtinLED = (BuiltInLED *)led;
|
||||||
|
int value = REMAP_TO_RANGE(val, MATTER_BRIGHTNESS, STANDARD_BRIGHTNESS);
|
||||||
|
|
||||||
|
builtinLED->setBrightness(value);
|
||||||
|
if (!builtinLED->write()) {
|
||||||
|
err = ESP_FAIL;
|
||||||
|
}
|
||||||
|
log_i("LED set brightness: %d", value);
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
|
||||||
|
esp_err_t light_accessory_set_hue(void *led, uint8_t val) {
|
||||||
|
esp_err_t err = ESP_OK;
|
||||||
|
BuiltInLED *builtinLED = (BuiltInLED *)led;
|
||||||
|
int value = REMAP_TO_RANGE(val, MATTER_HUE, STANDARD_HUE);
|
||||||
|
led_indicator_color_hsv_t hsv = builtinLED->getHSV();
|
||||||
|
hsv.h = value;
|
||||||
|
builtinLED->setHSV(hsv);
|
||||||
|
if (!builtinLED->write()) {
|
||||||
|
err = ESP_FAIL;
|
||||||
|
}
|
||||||
|
log_i("LED set hue: %d", value);
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
|
||||||
|
esp_err_t light_accessory_set_saturation(void *led, uint8_t val) {
|
||||||
|
esp_err_t err = ESP_OK;
|
||||||
|
BuiltInLED *builtinLED = (BuiltInLED *)led;
|
||||||
|
int value = REMAP_TO_RANGE(val, MATTER_SATURATION, STANDARD_SATURATION);
|
||||||
|
led_indicator_color_hsv_t hsv = builtinLED->getHSV();
|
||||||
|
hsv.s = value;
|
||||||
|
builtinLED->setHSV(hsv);
|
||||||
|
if (!builtinLED->write()) {
|
||||||
|
err = ESP_FAIL;
|
||||||
|
}
|
||||||
|
log_i("LED set saturation: %d", value);
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
|
||||||
|
esp_err_t light_accessory_set_temperature(void *led, uint16_t val) {
|
||||||
|
esp_err_t err = ESP_OK;
|
||||||
|
BuiltInLED *builtinLED = (BuiltInLED *)led;
|
||||||
|
uint32_t value = REMAP_TO_RANGE_INVERSE(val, STANDARD_TEMPERATURE_FACTOR);
|
||||||
|
builtinLED->setTemperature(value);
|
||||||
|
if (!builtinLED->write()) {
|
||||||
|
err = ESP_FAIL;
|
||||||
|
}
|
||||||
|
log_i("LED set temperature: %ld", value);
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
|
||||||
|
app_driver_handle_t light_accessory_init() {
|
||||||
|
/* Initialize led */
|
||||||
|
static BuiltInLED builtinLED;
|
||||||
|
|
||||||
|
const uint8_t pin = WS2812_PIN; // set your board WS2812b pin here
|
||||||
|
builtinLED.begin(pin);
|
||||||
|
return (app_driver_handle_t)&builtinLED;
|
||||||
|
}
|
||||||
@ -0,0 +1,47 @@
|
|||||||
|
#include <esp_err.h>
|
||||||
|
#include <sdkconfig.h>
|
||||||
|
|
||||||
|
// set your board WS2812b pin here (e.g. 48 is the default pin for the ESP32-S3 devkit)
|
||||||
|
#ifndef CONFIG_WS2812_PIN
|
||||||
|
#define WS2812_PIN 48 // ESP32-S3 DevKitC built-in LED
|
||||||
|
#else
|
||||||
|
#define WS2812_PIN CONFIG_WS2812_PIN // From sdkconfig.defaults.<soc>
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef RGB_BUILTIN
|
||||||
|
#define RGB_BUILTIN WS2812_PIN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Set your board button pin here (e.g. 0 is the default pin for the ESP32-S3 devkit)
|
||||||
|
#ifndef CONFIG_BUTTON_PIN
|
||||||
|
#define BUTTON_PIN 0 // ESP32-S3 DevKitC built-in button
|
||||||
|
#else
|
||||||
|
#define BUTTON_PIN CONFIG_BUTTON_PIN // From sdkconfig.defaults.<soc>
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/** Standard max values (used for remapping attributes) */
|
||||||
|
#define STANDARD_BRIGHTNESS 255
|
||||||
|
#define STANDARD_HUE 360
|
||||||
|
#define STANDARD_SATURATION 255
|
||||||
|
#define STANDARD_TEMPERATURE_FACTOR 1000000
|
||||||
|
|
||||||
|
/** Matter max values (used for remapping attributes) */
|
||||||
|
#define MATTER_BRIGHTNESS 254
|
||||||
|
#define MATTER_HUE 254
|
||||||
|
#define MATTER_SATURATION 254
|
||||||
|
#define MATTER_TEMPERATURE_FACTOR 1000000
|
||||||
|
|
||||||
|
/** Default attribute values used during initialization */
|
||||||
|
#define DEFAULT_POWER true
|
||||||
|
#define DEFAULT_BRIGHTNESS 64
|
||||||
|
#define DEFAULT_HUE 128
|
||||||
|
#define DEFAULT_SATURATION 254
|
||||||
|
|
||||||
|
typedef void *app_driver_handle_t;
|
||||||
|
|
||||||
|
esp_err_t light_accessory_set_power(void *led, uint8_t val);
|
||||||
|
esp_err_t light_accessory_set_brightness(void *led, uint8_t val);
|
||||||
|
esp_err_t light_accessory_set_hue(void *led, uint8_t val);
|
||||||
|
esp_err_t light_accessory_set_saturation(void *led, uint8_t val);
|
||||||
|
esp_err_t light_accessory_set_temperature(void *led, uint16_t val);
|
||||||
|
app_driver_handle_t light_accessory_init();
|
||||||
384
idf_component_examples/esp_matter_light/main/matter_light.cpp
Normal file
384
idf_component_examples/esp_matter_light/main/matter_light.cpp
Normal file
@ -0,0 +1,384 @@
|
|||||||
|
/*
|
||||||
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
||||||
|
Unless required by applicable law or agreed to in writing, this
|
||||||
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
||||||
|
CONDITIONS OF ANY KIND, either express or implied.
|
||||||
|
*/
|
||||||
|
#include <Arduino.h>
|
||||||
|
#include "matter_accessory_driver.h"
|
||||||
|
|
||||||
|
#include <esp_err.h>
|
||||||
|
|
||||||
|
#include <esp_matter.h>
|
||||||
|
#include <esp_matter_console.h>
|
||||||
|
#include <esp_matter_ota.h>
|
||||||
|
|
||||||
|
#include <app/server/CommissioningWindowManager.h>
|
||||||
|
#include <app/server/Server.h>
|
||||||
|
|
||||||
|
#if CHIP_DEVICE_CONFIG_ENABLE_THREAD
|
||||||
|
#include <platform/ESP32/OpenthreadLauncher.h>
|
||||||
|
#include "esp_openthread_types.h"
|
||||||
|
|
||||||
|
#define ESP_OPENTHREAD_DEFAULT_RADIO_CONFIG() \
|
||||||
|
{ .radio_mode = RADIO_MODE_NATIVE, }
|
||||||
|
|
||||||
|
#define ESP_OPENTHREAD_DEFAULT_HOST_CONFIG() \
|
||||||
|
{ .host_connection_mode = HOST_CONNECTION_MODE_NONE, }
|
||||||
|
|
||||||
|
#define ESP_OPENTHREAD_DEFAULT_PORT_CONFIG() \
|
||||||
|
{ .storage_partition_name = "nvs", .netif_queue_size = 10, .task_queue_size = 10, }
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// set your board button pin here
|
||||||
|
const uint8_t button_gpio = BUTTON_PIN; // GPIO BOOT Button
|
||||||
|
|
||||||
|
uint16_t light_endpoint_id = 0;
|
||||||
|
|
||||||
|
using namespace esp_matter;
|
||||||
|
using namespace esp_matter::attribute;
|
||||||
|
using namespace esp_matter::endpoint;
|
||||||
|
using namespace chip::app::Clusters;
|
||||||
|
|
||||||
|
constexpr auto k_timeout_seconds = 300;
|
||||||
|
|
||||||
|
#if CONFIG_ENABLE_ENCRYPTED_OTA
|
||||||
|
extern const char decryption_key_start[] asm("_binary_esp_image_encryption_key_pem_start");
|
||||||
|
extern const char decryption_key_end[] asm("_binary_esp_image_encryption_key_pem_end");
|
||||||
|
|
||||||
|
static const char *s_decryption_key = decryption_key_start;
|
||||||
|
static const uint16_t s_decryption_key_len = decryption_key_end - decryption_key_start;
|
||||||
|
#endif // CONFIG_ENABLE_ENCRYPTED_OTA
|
||||||
|
|
||||||
|
bool isAccessoryCommissioned() {
|
||||||
|
return chip::Server::GetInstance().GetFabricTable().FabricCount() > 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
#if CHIP_DEVICE_CONFIG_ENABLE_WIFI_STATION
|
||||||
|
bool isWifiConnected() {
|
||||||
|
return chip::DeviceLayer::ConnectivityMgr().IsWiFiStationConnected();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if CHIP_DEVICE_CONFIG_ENABLE_THREAD
|
||||||
|
bool isThreadConnected() {
|
||||||
|
return chip::DeviceLayer::ConnectivityMgr().IsThreadAttached();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
static void app_event_cb(const ChipDeviceEvent *event, intptr_t arg) {
|
||||||
|
switch (event->Type) {
|
||||||
|
case chip::DeviceLayer::DeviceEventType::kInterfaceIpAddressChanged:
|
||||||
|
log_i(
|
||||||
|
"Interface %s Address changed", event->InterfaceIpAddressChanged.Type == chip::DeviceLayer::InterfaceIpChangeType::kIpV4_Assigned ? "IPv4" : "IPV6"
|
||||||
|
);
|
||||||
|
break;
|
||||||
|
|
||||||
|
case chip::DeviceLayer::DeviceEventType::kCommissioningComplete: log_i("Commissioning complete"); break;
|
||||||
|
|
||||||
|
case chip::DeviceLayer::DeviceEventType::kFailSafeTimerExpired: log_i("Commissioning failed, fail safe timer expired"); break;
|
||||||
|
|
||||||
|
case chip::DeviceLayer::DeviceEventType::kCommissioningSessionStarted: log_i("Commissioning session started"); break;
|
||||||
|
|
||||||
|
case chip::DeviceLayer::DeviceEventType::kCommissioningSessionStopped: log_i("Commissioning session stopped"); break;
|
||||||
|
|
||||||
|
case chip::DeviceLayer::DeviceEventType::kCommissioningWindowOpened: log_i("Commissioning window opened"); break;
|
||||||
|
|
||||||
|
case chip::DeviceLayer::DeviceEventType::kCommissioningWindowClosed: log_i("Commissioning window closed"); break;
|
||||||
|
|
||||||
|
case chip::DeviceLayer::DeviceEventType::kFabricRemoved:
|
||||||
|
{
|
||||||
|
log_i("Fabric removed successfully");
|
||||||
|
if (chip::Server::GetInstance().GetFabricTable().FabricCount() == 0) {
|
||||||
|
chip::CommissioningWindowManager &commissionMgr = chip::Server::GetInstance().GetCommissioningWindowManager();
|
||||||
|
constexpr auto kTimeoutSeconds = chip::System::Clock::Seconds16(k_timeout_seconds);
|
||||||
|
if (!commissionMgr.IsCommissioningWindowOpen()) {
|
||||||
|
/* After removing last fabric, this example does not remove the Wi-Fi credentials
|
||||||
|
* and still has IP connectivity so, only advertising on DNS-SD.
|
||||||
|
*/
|
||||||
|
CHIP_ERROR err = commissionMgr.OpenBasicCommissioningWindow(kTimeoutSeconds, chip::CommissioningWindowAdvertisement::kDnssdOnly);
|
||||||
|
if (err != CHIP_NO_ERROR) {
|
||||||
|
log_e("Failed to open commissioning window, err:%" CHIP_ERROR_FORMAT, err.Format());
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
case chip::DeviceLayer::DeviceEventType::kFabricWillBeRemoved: log_i("Fabric will be removed"); break;
|
||||||
|
|
||||||
|
case chip::DeviceLayer::DeviceEventType::kFabricUpdated: log_i("Fabric is updated"); break;
|
||||||
|
|
||||||
|
case chip::DeviceLayer::DeviceEventType::kFabricCommitted: log_i("Fabric is committed"); break;
|
||||||
|
|
||||||
|
case chip::DeviceLayer::DeviceEventType::kBLEDeinitialized: log_i("BLE deinitialized and memory reclaimed"); break;
|
||||||
|
|
||||||
|
default: break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
esp_err_t matter_light_attribute_update(
|
||||||
|
app_driver_handle_t driver_handle, uint16_t endpoint_id, uint32_t cluster_id, uint32_t attribute_id, esp_matter_attr_val_t *val
|
||||||
|
) {
|
||||||
|
esp_err_t err = ESP_OK;
|
||||||
|
if (endpoint_id == light_endpoint_id) {
|
||||||
|
void *led = (void *)driver_handle;
|
||||||
|
if (cluster_id == OnOff::Id) {
|
||||||
|
if (attribute_id == OnOff::Attributes::OnOff::Id) {
|
||||||
|
err = light_accessory_set_power(led, val->val.b);
|
||||||
|
}
|
||||||
|
} else if (cluster_id == LevelControl::Id) {
|
||||||
|
if (attribute_id == LevelControl::Attributes::CurrentLevel::Id) {
|
||||||
|
err = light_accessory_set_brightness(led, val->val.u8);
|
||||||
|
}
|
||||||
|
} else if (cluster_id == ColorControl::Id) {
|
||||||
|
if (attribute_id == ColorControl::Attributes::CurrentHue::Id) {
|
||||||
|
err = light_accessory_set_hue(led, val->val.u8);
|
||||||
|
} else if (attribute_id == ColorControl::Attributes::CurrentSaturation::Id) {
|
||||||
|
err = light_accessory_set_saturation(led, val->val.u8);
|
||||||
|
} else if (attribute_id == ColorControl::Attributes::ColorTemperatureMireds::Id) {
|
||||||
|
err = light_accessory_set_temperature(led, val->val.u16);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
|
||||||
|
esp_err_t matter_light_set_defaults(uint16_t endpoint_id) {
|
||||||
|
esp_err_t err = ESP_OK;
|
||||||
|
|
||||||
|
void *led = endpoint::get_priv_data(endpoint_id);
|
||||||
|
node_t *node = node::get();
|
||||||
|
endpoint_t *endpoint = endpoint::get(node, endpoint_id);
|
||||||
|
cluster_t *cluster = NULL;
|
||||||
|
attribute_t *attribute = NULL;
|
||||||
|
esp_matter_attr_val_t val = esp_matter_invalid(NULL);
|
||||||
|
|
||||||
|
/* Setting brightness */
|
||||||
|
cluster = cluster::get(endpoint, LevelControl::Id);
|
||||||
|
attribute = attribute::get(cluster, LevelControl::Attributes::CurrentLevel::Id);
|
||||||
|
attribute::get_val(attribute, &val);
|
||||||
|
err |= light_accessory_set_brightness(led, val.val.u8);
|
||||||
|
|
||||||
|
/* Setting color */
|
||||||
|
cluster = cluster::get(endpoint, ColorControl::Id);
|
||||||
|
attribute = attribute::get(cluster, ColorControl::Attributes::ColorMode::Id);
|
||||||
|
attribute::get_val(attribute, &val);
|
||||||
|
if (val.val.u8 == (uint8_t)ColorControl::ColorMode::kCurrentHueAndCurrentSaturation) {
|
||||||
|
/* Setting hue */
|
||||||
|
attribute = attribute::get(cluster, ColorControl::Attributes::CurrentHue::Id);
|
||||||
|
attribute::get_val(attribute, &val);
|
||||||
|
err |= light_accessory_set_hue(led, val.val.u8);
|
||||||
|
/* Setting saturation */
|
||||||
|
attribute = attribute::get(cluster, ColorControl::Attributes::CurrentSaturation::Id);
|
||||||
|
attribute::get_val(attribute, &val);
|
||||||
|
err |= light_accessory_set_saturation(led, val.val.u8);
|
||||||
|
} else if (val.val.u8 == (uint8_t)ColorControl::ColorMode::kColorTemperature) {
|
||||||
|
/* Setting temperature */
|
||||||
|
attribute = attribute::get(cluster, ColorControl::Attributes::ColorTemperatureMireds::Id);
|
||||||
|
attribute::get_val(attribute, &val);
|
||||||
|
err |= light_accessory_set_temperature(led, val.val.u16);
|
||||||
|
} else {
|
||||||
|
log_e("Color mode not supported");
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Setting power */
|
||||||
|
cluster = cluster::get(endpoint, OnOff::Id);
|
||||||
|
attribute = attribute::get(cluster, OnOff::Attributes::OnOff::Id);
|
||||||
|
attribute::get_val(attribute, &val);
|
||||||
|
err |= light_accessory_set_power(led, val.val.b);
|
||||||
|
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
|
||||||
|
void button_driver_init() {
|
||||||
|
/* Initialize button */
|
||||||
|
pinMode(button_gpio, INPUT_PULLUP);
|
||||||
|
}
|
||||||
|
|
||||||
|
// This callback is called for every attribute update. The callback implementation shall
|
||||||
|
// handle the desired attributes and return an appropriate error code. If the attribute
|
||||||
|
// is not of your interest, please do not return an error code and strictly return ESP_OK.
|
||||||
|
static esp_err_t app_attribute_update_cb(
|
||||||
|
attribute::callback_type_t type, uint16_t endpoint_id, uint32_t cluster_id, uint32_t attribute_id, esp_matter_attr_val_t *val, void *priv_data
|
||||||
|
) {
|
||||||
|
esp_err_t err = ESP_OK;
|
||||||
|
|
||||||
|
if (type == PRE_UPDATE) {
|
||||||
|
/* Driver update */
|
||||||
|
app_driver_handle_t driver_handle = (app_driver_handle_t)priv_data;
|
||||||
|
err = matter_light_attribute_update(driver_handle, endpoint_id, cluster_id, attribute_id, val);
|
||||||
|
}
|
||||||
|
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
|
||||||
|
// This callback is invoked when clients interact with the Identify Cluster.
|
||||||
|
// In the callback implementation, an endpoint can identify itself. (e.g., by flashing an LED or light).
|
||||||
|
static esp_err_t app_identification_cb(identification::callback_type_t type, uint16_t endpoint_id, uint8_t effect_id, uint8_t effect_variant, void *priv_data) {
|
||||||
|
log_i("Identification callback: type: %u, effect: %u, variant: %u", type, effect_id, effect_variant);
|
||||||
|
return ESP_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
void setup() {
|
||||||
|
esp_err_t err = ESP_OK;
|
||||||
|
|
||||||
|
/* Initialize driver */
|
||||||
|
app_driver_handle_t light_handle = light_accessory_init();
|
||||||
|
button_driver_init();
|
||||||
|
|
||||||
|
/* Create a Matter node and add the mandatory Root Node device type on endpoint 0 */
|
||||||
|
node::config_t node_config;
|
||||||
|
|
||||||
|
// node handle can be used to add/modify other endpoints.
|
||||||
|
node_t *node = node::create(&node_config, app_attribute_update_cb, app_identification_cb);
|
||||||
|
if (node == nullptr) {
|
||||||
|
log_e("Failed to create Matter node");
|
||||||
|
abort();
|
||||||
|
}
|
||||||
|
|
||||||
|
extended_color_light::config_t light_config;
|
||||||
|
light_config.on_off.on_off = DEFAULT_POWER;
|
||||||
|
light_config.on_off.lighting.start_up_on_off = nullptr;
|
||||||
|
light_config.level_control.current_level = DEFAULT_BRIGHTNESS;
|
||||||
|
light_config.level_control.lighting.start_up_current_level = DEFAULT_BRIGHTNESS;
|
||||||
|
light_config.color_control.color_mode = (uint8_t)ColorControl::ColorMode::kColorTemperature;
|
||||||
|
light_config.color_control.enhanced_color_mode = (uint8_t)ColorControl::ColorMode::kColorTemperature;
|
||||||
|
light_config.color_control.color_temperature.startup_color_temperature_mireds = nullptr;
|
||||||
|
|
||||||
|
// endpoint handles can be used to add/modify clusters.
|
||||||
|
endpoint_t *endpoint = extended_color_light::create(node, &light_config, ENDPOINT_FLAG_NONE, light_handle);
|
||||||
|
if (endpoint == nullptr) {
|
||||||
|
log_e("Failed to create extended color light endpoint");
|
||||||
|
abort();
|
||||||
|
}
|
||||||
|
|
||||||
|
light_endpoint_id = endpoint::get_id(endpoint);
|
||||||
|
log_i("Light created with endpoint_id %d", light_endpoint_id);
|
||||||
|
|
||||||
|
/* Mark deferred persistence for some attributes that might be changed rapidly */
|
||||||
|
cluster_t *level_control_cluster = cluster::get(endpoint, LevelControl::Id);
|
||||||
|
attribute_t *current_level_attribute = attribute::get(level_control_cluster, LevelControl::Attributes::CurrentLevel::Id);
|
||||||
|
attribute::set_deferred_persistence(current_level_attribute);
|
||||||
|
|
||||||
|
cluster_t *color_control_cluster = cluster::get(endpoint, ColorControl::Id);
|
||||||
|
attribute_t *current_x_attribute = attribute::get(color_control_cluster, ColorControl::Attributes::CurrentX::Id);
|
||||||
|
attribute::set_deferred_persistence(current_x_attribute);
|
||||||
|
attribute_t *current_y_attribute = attribute::get(color_control_cluster, ColorControl::Attributes::CurrentY::Id); // codespell:ignore
|
||||||
|
attribute::set_deferred_persistence(current_y_attribute);
|
||||||
|
attribute_t *color_temp_attribute = attribute::get(color_control_cluster, ColorControl::Attributes::ColorTemperatureMireds::Id);
|
||||||
|
attribute::set_deferred_persistence(color_temp_attribute);
|
||||||
|
|
||||||
|
#if CHIP_DEVICE_CONFIG_ENABLE_THREAD
|
||||||
|
/* Set OpenThread platform config */
|
||||||
|
esp_openthread_platform_config_t config = {
|
||||||
|
.radio_config = ESP_OPENTHREAD_DEFAULT_RADIO_CONFIG(),
|
||||||
|
.host_config = ESP_OPENTHREAD_DEFAULT_HOST_CONFIG(),
|
||||||
|
.port_config = ESP_OPENTHREAD_DEFAULT_PORT_CONFIG(),
|
||||||
|
};
|
||||||
|
set_openthread_platform_config(&config);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Matter start */
|
||||||
|
err = esp_matter::start(app_event_cb);
|
||||||
|
if (err != ESP_OK) {
|
||||||
|
log_e("Failed to start Matter, err:%d", err);
|
||||||
|
abort();
|
||||||
|
}
|
||||||
|
|
||||||
|
#if CONFIG_ENABLE_ENCRYPTED_OTA
|
||||||
|
err = esp_matter_ota_requestor_encrypted_init(s_decryption_key, s_decryption_key_len);
|
||||||
|
if (err != ESP_OK) {
|
||||||
|
log_e("Failed to initialized the encrypted OTA, err: %d", err);
|
||||||
|
abort();
|
||||||
|
}
|
||||||
|
#endif // CONFIG_ENABLE_ENCRYPTED_OTA
|
||||||
|
|
||||||
|
#if CONFIG_ENABLE_CHIP_SHELL
|
||||||
|
esp_matter::console::diagnostics_register_commands();
|
||||||
|
esp_matter::console::wifi_register_commands();
|
||||||
|
#if CONFIG_OPENTHREAD_CLI
|
||||||
|
esp_matter::console::otcli_register_commands();
|
||||||
|
#endif
|
||||||
|
esp_matter::console::init();
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
void loop() {
|
||||||
|
static uint32_t button_time_stamp = 0;
|
||||||
|
static bool button_state = false;
|
||||||
|
static bool started = false;
|
||||||
|
|
||||||
|
if (!isAccessoryCommissioned()) {
|
||||||
|
log_w("Accessory not commissioned yet. Waiting for commissioning.");
|
||||||
|
#ifdef RGB_BUILTIN
|
||||||
|
rgbLedWrite(RGB_BUILTIN, 48, 0, 20); // Purple indicates accessory not commissioned
|
||||||
|
#endif
|
||||||
|
delay(5000);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
#if CHIP_DEVICE_CONFIG_ENABLE_WIFI_STATION
|
||||||
|
if (!isWifiConnected()) {
|
||||||
|
log_w("Wi-Fi not connected yet. Waiting for connection.");
|
||||||
|
#ifdef RGB_BUILTIN
|
||||||
|
rgbLedWrite(RGB_BUILTIN, 48, 20, 0); // Orange indicates accessory not connected to Wi-Fi
|
||||||
|
#endif
|
||||||
|
delay(5000);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if CHIP_DEVICE_CONFIG_ENABLE_THREAD
|
||||||
|
if (!isThreadConnected()) {
|
||||||
|
log_w("Thread not connected yet. Waiting for connection.");
|
||||||
|
#ifdef RGB_BUILTIN
|
||||||
|
rgbLedWrite(RGB_BUILTIN, 0, 20, 48); // Blue indicates accessory not connected to Trhead
|
||||||
|
#endif
|
||||||
|
delay(5000);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Once all network connections are established, the accessory is ready for use
|
||||||
|
// Run it only once
|
||||||
|
if (!started) {
|
||||||
|
log_i("Accessory is commissioned and connected to Wi-Fi. Ready for use.");
|
||||||
|
started = true;
|
||||||
|
// Starting driver with default values
|
||||||
|
matter_light_set_defaults(light_endpoint_id);
|
||||||
|
}
|
||||||
|
|
||||||
|
// Check if the button is pressed and toggle the light right away
|
||||||
|
if (digitalRead(button_gpio) == LOW && !button_state) {
|
||||||
|
// deals with button debounce
|
||||||
|
button_time_stamp = millis(); // record the time while the button is pressed.
|
||||||
|
button_state = true; // pressed.
|
||||||
|
|
||||||
|
// Toggle button is pressed - toggle the light
|
||||||
|
log_i("Toggle button pressed");
|
||||||
|
|
||||||
|
endpoint_t *endpoint = endpoint::get(node::get(), light_endpoint_id);
|
||||||
|
cluster_t *cluster = cluster::get(endpoint, OnOff::Id);
|
||||||
|
attribute_t *attribute = attribute::get(cluster, OnOff::Attributes::OnOff::Id);
|
||||||
|
|
||||||
|
esp_matter_attr_val_t val = esp_matter_invalid(NULL);
|
||||||
|
attribute::get_val(attribute, &val);
|
||||||
|
val.val.b = !val.val.b;
|
||||||
|
attribute::update(light_endpoint_id, OnOff::Id, OnOff::Attributes::OnOff::Id, &val);
|
||||||
|
}
|
||||||
|
|
||||||
|
// Check if the button is released and handle the factory reset
|
||||||
|
uint32_t time_diff = millis() - button_time_stamp;
|
||||||
|
if (button_state && time_diff > 100 && digitalRead(button_gpio) == HIGH) {
|
||||||
|
button_state = false; // released. It can be pressed again after 100ms debounce.
|
||||||
|
|
||||||
|
// Factory reset is triggered if the button is pressed for more than 10 seconds
|
||||||
|
if (time_diff > 10000) {
|
||||||
|
log_i("Factory reset triggered. Light will restored to factory settings.");
|
||||||
|
esp_matter::factory_reset();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
delay(50); // WDT is happier with a delay
|
||||||
|
}
|
||||||
10
idf_component_examples/esp_matter_light/partitions.csv
Normal file
10
idf_component_examples/esp_matter_light/partitions.csv
Normal file
@ -0,0 +1,10 @@
|
|||||||
|
# Name, Type, SubType, Offset, Size, Flags
|
||||||
|
# Note: Firmware partition offset needs to be 64K aligned, initial 36K (9 sectors) are reserved for bootloader and partition table
|
||||||
|
esp_secure_cert, 0x3F, ,0xd000, 0x2000, encrypted
|
||||||
|
nvs, data, nvs, 0x10000, 0xC000,
|
||||||
|
nvs_keys, data, nvs_keys,, 0x1000, encrypted
|
||||||
|
otadata, data, ota, , 0x2000
|
||||||
|
phy_init, data, phy, , 0x1000,
|
||||||
|
ota_0, app, ota_0, 0x20000, 0x1E0000,
|
||||||
|
ota_1, app, ota_1, 0x200000, 0x1E0000,
|
||||||
|
fctry, data, nvs, 0x3E0000, 0x6000
|
||||||
|
@ -0,0 +1,79 @@
|
|||||||
|
CONFIG_IDF_TARGET="esp32c6"
|
||||||
|
|
||||||
|
# Arduino Settings
|
||||||
|
CONFIG_FREERTOS_HZ=1000
|
||||||
|
CONFIG_AUTOSTART_ARDUINO=y
|
||||||
|
|
||||||
|
# Log Levels
|
||||||
|
# Boot Messages - Log level
|
||||||
|
CONFIG_BOOTLOADER_LOG_LEVEL_ERROR=y
|
||||||
|
# Arduino Log Level
|
||||||
|
CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_INFO=y
|
||||||
|
# IDF Log Level
|
||||||
|
CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
|
||||||
|
|
||||||
|
# Default to 921600 baud when flashing and monitoring device
|
||||||
|
CONFIG_ESPTOOLPY_BAUD_921600B=y
|
||||||
|
CONFIG_ESPTOOLPY_BAUD=921600
|
||||||
|
CONFIG_ESPTOOLPY_COMPRESSED=y
|
||||||
|
CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
|
||||||
|
CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
|
||||||
|
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
|
||||||
|
|
||||||
|
# libsodium
|
||||||
|
CONFIG_LIBSODIUM_USE_MBEDTLS_SHA=y
|
||||||
|
|
||||||
|
# NIMBLE
|
||||||
|
CONFIG_BT_ENABLED=y
|
||||||
|
CONFIG_BT_NIMBLE_ENABLED=y
|
||||||
|
CONFIG_BT_NIMBLE_EXT_ADV=n
|
||||||
|
CONFIG_BT_NIMBLE_HCI_EVT_BUF_SIZE=70
|
||||||
|
CONFIG_USE_BLE_ONLY_FOR_COMMISSIONING=n
|
||||||
|
|
||||||
|
# FreeRTOS should use legacy API
|
||||||
|
CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY=y
|
||||||
|
|
||||||
|
# Enable OpenThread
|
||||||
|
CONFIG_OPENTHREAD_ENABLED=y
|
||||||
|
CONFIG_OPENTHREAD_SRP_CLIENT=y
|
||||||
|
CONFIG_OPENTHREAD_DNS_CLIENT=y
|
||||||
|
CONFIG_OPENTHREAD_LOG_LEVEL_DYNAMIC=n
|
||||||
|
CONFIG_OPENTHREAD_LOG_LEVEL_NOTE=y
|
||||||
|
CONFIG_OPENTHREAD_CLI=n
|
||||||
|
|
||||||
|
# Disable lwip ipv6 autoconfig
|
||||||
|
CONFIG_LWIP_IPV6_AUTOCONFIG=n
|
||||||
|
|
||||||
|
# Use a custom partition table
|
||||||
|
CONFIG_PARTITION_TABLE_CUSTOM=y
|
||||||
|
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
|
||||||
|
|
||||||
|
# LwIP config for OpenThread
|
||||||
|
CONFIG_LWIP_IPV6_NUM_ADDRESSES=8
|
||||||
|
CONFIG_LWIP_MULTICAST_PING=y
|
||||||
|
|
||||||
|
# MDNS platform
|
||||||
|
CONFIG_USE_MINIMAL_MDNS=n
|
||||||
|
CONFIG_ENABLE_EXTENDED_DISCOVERY=y
|
||||||
|
|
||||||
|
# Enable OTA Requester
|
||||||
|
CONFIG_ENABLE_OTA_REQUESTOR=n
|
||||||
|
|
||||||
|
# Disable STA and AP for ESP32C6
|
||||||
|
CONFIG_ENABLE_WIFI_STATION=n
|
||||||
|
CONFIG_ENABLE_WIFI_AP=n
|
||||||
|
|
||||||
|
# Enable chip shell
|
||||||
|
CONFIG_ENABLE_CHIP_SHELL=n
|
||||||
|
|
||||||
|
# Disable persist subscriptions
|
||||||
|
CONFIG_ENABLE_PERSIST_SUBSCRIPTIONS=n
|
||||||
|
|
||||||
|
# MRP configs
|
||||||
|
CONFIG_MRP_LOCAL_ACTIVE_RETRY_INTERVAL_FOR_THREAD=5000
|
||||||
|
CONFIG_MRP_LOCAL_IDLE_RETRY_INTERVAL_FOR_THREAD=5000
|
||||||
|
CONFIG_MRP_RETRY_INTERVAL_SENDER_BOOST_FOR_THREAD=5000
|
||||||
|
CONFIG_MRP_MAX_RETRANS=3
|
||||||
|
|
||||||
|
# Enable HKDF in mbedtls
|
||||||
|
CONFIG_MBEDTLS_HKDF_C=y
|
||||||
@ -0,0 +1,64 @@
|
|||||||
|
CONFIG_IDF_TARGET="esp32c3"
|
||||||
|
|
||||||
|
# Arduino Settings
|
||||||
|
CONFIG_FREERTOS_HZ=1000
|
||||||
|
CONFIG_AUTOSTART_ARDUINO=y
|
||||||
|
|
||||||
|
# Log Levels
|
||||||
|
# Boot Messages - Log level
|
||||||
|
CONFIG_BOOTLOADER_LOG_LEVEL_ERROR=y
|
||||||
|
# Arduino Log Level
|
||||||
|
CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_INFO=y
|
||||||
|
# IDF Log Level
|
||||||
|
CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
|
||||||
|
|
||||||
|
# Default to 921600 baud when flashing and monitoring device
|
||||||
|
CONFIG_ESPTOOLPY_BAUD_921600B=y
|
||||||
|
CONFIG_ESPTOOLPY_BAUD=921600
|
||||||
|
CONFIG_ESPTOOLPY_COMPRESSED=y
|
||||||
|
CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
|
||||||
|
CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
|
||||||
|
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
|
||||||
|
|
||||||
|
#enable BT
|
||||||
|
CONFIG_BT_ENABLED=y
|
||||||
|
CONFIG_BT_NIMBLE_ENABLED=y
|
||||||
|
|
||||||
|
#disable BT connection reattempt
|
||||||
|
CONFIG_BT_NIMBLE_ENABLE_CONN_REATTEMPT=n
|
||||||
|
|
||||||
|
#enable lwip ipv6 autoconfig
|
||||||
|
CONFIG_LWIP_IPV6_AUTOCONFIG=y
|
||||||
|
|
||||||
|
# Use a custom partition table
|
||||||
|
CONFIG_PARTITION_TABLE_CUSTOM=y
|
||||||
|
CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"
|
||||||
|
CONFIG_PARTITION_TABLE_OFFSET=0xC000
|
||||||
|
|
||||||
|
# Disable chip shell
|
||||||
|
CONFIG_ENABLE_CHIP_SHELL=n
|
||||||
|
|
||||||
|
# Enable OTA Requester
|
||||||
|
CONFIG_ENABLE_OTA_REQUESTOR=n
|
||||||
|
|
||||||
|
#enable lwIP route hooks
|
||||||
|
CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT=y
|
||||||
|
CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT=y
|
||||||
|
|
||||||
|
# disable softap by default
|
||||||
|
CONFIG_ESP_WIFI_SOFTAP_SUPPORT=n
|
||||||
|
CONFIG_ENABLE_WIFI_STATION=y
|
||||||
|
CONFIG_ENABLE_WIFI_AP=n
|
||||||
|
|
||||||
|
# Disable DS Peripheral
|
||||||
|
CONFIG_ESP_SECURE_CERT_DS_PERIPHERAL=n
|
||||||
|
|
||||||
|
# Use compact attribute storage mode
|
||||||
|
CONFIG_ESP_MATTER_NVS_USE_COMPACT_ATTR_STORAGE=y
|
||||||
|
|
||||||
|
# Enable HKDF in mbedtls
|
||||||
|
CONFIG_MBEDTLS_HKDF_C=y
|
||||||
|
|
||||||
|
# Increase LwIP IPv6 address number to 6 (MAX_FABRIC + 1)
|
||||||
|
# unique local addresses for fabrics(MAX_FABRIC), a link local address(1)
|
||||||
|
CONFIG_LWIP_IPV6_NUM_ADDRESSES=6
|
||||||
@ -0,0 +1,79 @@
|
|||||||
|
CONFIG_IDF_TARGET="esp32c6"
|
||||||
|
|
||||||
|
# Arduino Settings
|
||||||
|
CONFIG_FREERTOS_HZ=1000
|
||||||
|
CONFIG_AUTOSTART_ARDUINO=y
|
||||||
|
|
||||||
|
# Log Levels
|
||||||
|
# Boot Messages - Log level
|
||||||
|
CONFIG_BOOTLOADER_LOG_LEVEL_ERROR=y
|
||||||
|
# Arduino Log Level
|
||||||
|
CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_INFO=y
|
||||||
|
# IDF Log Level
|
||||||
|
CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
|
||||||
|
|
||||||
|
# Default to 921600 baud when flashing and monitoring device
|
||||||
|
CONFIG_ESPTOOLPY_BAUD_921600B=y
|
||||||
|
CONFIG_ESPTOOLPY_BAUD=921600
|
||||||
|
CONFIG_ESPTOOLPY_COMPRESSED=y
|
||||||
|
CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
|
||||||
|
CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
|
||||||
|
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
|
||||||
|
|
||||||
|
#enable BT
|
||||||
|
CONFIG_BT_ENABLED=y
|
||||||
|
CONFIG_BT_NIMBLE_ENABLED=y
|
||||||
|
|
||||||
|
#disable BT connection reattempt
|
||||||
|
CONFIG_BT_NIMBLE_ENABLE_CONN_REATTEMPT=n
|
||||||
|
|
||||||
|
#enable lwip ipv6 autoconfig
|
||||||
|
CONFIG_LWIP_IPV6_AUTOCONFIG=y
|
||||||
|
|
||||||
|
# Use a custom partition table
|
||||||
|
CONFIG_PARTITION_TABLE_CUSTOM=y
|
||||||
|
CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"
|
||||||
|
CONFIG_PARTITION_TABLE_OFFSET=0xC000
|
||||||
|
|
||||||
|
# Disable chip shell
|
||||||
|
CONFIG_ENABLE_CHIP_SHELL=n
|
||||||
|
|
||||||
|
# Enable OTA Requester
|
||||||
|
CONFIG_ENABLE_OTA_REQUESTOR=n
|
||||||
|
|
||||||
|
#enable lwIP route hooks
|
||||||
|
CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT=y
|
||||||
|
CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT=y
|
||||||
|
|
||||||
|
# disable softap by default
|
||||||
|
CONFIG_ESP_WIFI_SOFTAP_SUPPORT=n
|
||||||
|
CONFIG_ENABLE_WIFI_STATION=y
|
||||||
|
CONFIG_ENABLE_WIFI_AP=n
|
||||||
|
|
||||||
|
# Disable DS Peripheral
|
||||||
|
CONFIG_ESP_SECURE_CERT_DS_PERIPHERAL=n
|
||||||
|
|
||||||
|
# Use compact attribute storage mode
|
||||||
|
CONFIG_ESP_MATTER_NVS_USE_COMPACT_ATTR_STORAGE=y
|
||||||
|
|
||||||
|
# Enable HKDF in mbedtls
|
||||||
|
CONFIG_MBEDTLS_HKDF_C=y
|
||||||
|
|
||||||
|
# Increase LwIP IPv6 address number to 6 (MAX_FABRIC + 1)
|
||||||
|
# unique local addresses for fabrics(MAX_FABRIC), a link local address(1)
|
||||||
|
CONFIG_LWIP_IPV6_NUM_ADDRESSES=6
|
||||||
|
|
||||||
|
# libsodium
|
||||||
|
CONFIG_LIBSODIUM_USE_MBEDTLS_SHA=y
|
||||||
|
|
||||||
|
# NIMBLE
|
||||||
|
CONFIG_BT_NIMBLE_EXT_ADV=n
|
||||||
|
CONFIG_BT_NIMBLE_HCI_EVT_BUF_SIZE=70
|
||||||
|
CONFIG_USE_BLE_ONLY_FOR_COMMISSIONING=y
|
||||||
|
|
||||||
|
# FreeRTOS should use legacy API
|
||||||
|
CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY=y
|
||||||
|
|
||||||
|
# Use minimal mDNS
|
||||||
|
CONFIG_USE_MINIMAL_MDNS=y
|
||||||
|
CONFIG_ENABLE_EXTENDED_DISCOVERY=y
|
||||||
@ -0,0 +1,64 @@
|
|||||||
|
CONFIG_IDF_TARGET="esp32s3"
|
||||||
|
|
||||||
|
# Arduino Settings
|
||||||
|
CONFIG_FREERTOS_HZ=1000
|
||||||
|
CONFIG_AUTOSTART_ARDUINO=y
|
||||||
|
|
||||||
|
# Log Levels
|
||||||
|
# Boot Messages - Log level
|
||||||
|
CONFIG_BOOTLOADER_LOG_LEVEL_ERROR=y
|
||||||
|
# Arduino Log Level
|
||||||
|
CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_INFO=y
|
||||||
|
# IDF Log Level
|
||||||
|
CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
|
||||||
|
|
||||||
|
# Default to 921600 baud when flashing and monitoring device
|
||||||
|
CONFIG_ESPTOOLPY_BAUD_921600B=y
|
||||||
|
CONFIG_ESPTOOLPY_BAUD=921600
|
||||||
|
CONFIG_ESPTOOLPY_COMPRESSED=y
|
||||||
|
CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
|
||||||
|
CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
|
||||||
|
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
|
||||||
|
|
||||||
|
#enable BT
|
||||||
|
CONFIG_BT_ENABLED=y
|
||||||
|
CONFIG_BT_NIMBLE_ENABLED=y
|
||||||
|
|
||||||
|
#disable BT connection reattempt
|
||||||
|
CONFIG_BT_NIMBLE_ENABLE_CONN_REATTEMPT=n
|
||||||
|
|
||||||
|
#enable lwip ipv6 autoconfig
|
||||||
|
CONFIG_LWIP_IPV6_AUTOCONFIG=y
|
||||||
|
|
||||||
|
# Use a custom partition table
|
||||||
|
CONFIG_PARTITION_TABLE_CUSTOM=y
|
||||||
|
CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"
|
||||||
|
CONFIG_PARTITION_TABLE_OFFSET=0xC000
|
||||||
|
|
||||||
|
# Disable chip shell
|
||||||
|
CONFIG_ENABLE_CHIP_SHELL=n
|
||||||
|
|
||||||
|
# Enable OTA Requester
|
||||||
|
CONFIG_ENABLE_OTA_REQUESTOR=n
|
||||||
|
|
||||||
|
#enable lwIP route hooks
|
||||||
|
CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT=y
|
||||||
|
CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT=y
|
||||||
|
|
||||||
|
# disable softap by default
|
||||||
|
CONFIG_ESP_WIFI_SOFTAP_SUPPORT=n
|
||||||
|
CONFIG_ENABLE_WIFI_STATION=y
|
||||||
|
CONFIG_ENABLE_WIFI_AP=n
|
||||||
|
|
||||||
|
# Disable DS Peripheral
|
||||||
|
CONFIG_ESP_SECURE_CERT_DS_PERIPHERAL=n
|
||||||
|
|
||||||
|
# Use compact attribute storage mode
|
||||||
|
CONFIG_ESP_MATTER_NVS_USE_COMPACT_ATTR_STORAGE=y
|
||||||
|
|
||||||
|
# Enable HKDF in mbedtls
|
||||||
|
CONFIG_MBEDTLS_HKDF_C=y
|
||||||
|
|
||||||
|
# Increase LwIP IPv6 address number to 6 (MAX_FABRIC + 1)
|
||||||
|
# unique local addresses for fabrics(MAX_FABRIC), a link local address(1)
|
||||||
|
CONFIG_LWIP_IPV6_NUM_ADDRESSES=6
|
||||||
Loading…
Reference in New Issue
Block a user